Changelog for kiwi-desc-isoboot-3.74-89.1.i586.rpm :
Fri Aug 28 14:00:00 2009 msAATTsuse.de
- fixed partition size check which failed if oem-systemsize
was set but the disk was smaller than the configured size

Wed Aug 26 14:00:00 2009 msAATTsuse.de
- added support for parted in oem repartition code
- removed check for luks mapping in functions which are
surely not called if the luks extension is used

Tue Aug 25 14:00:00 2009 msAATTsuse.de
- support new syslinux >= 3.82 format (bnc #530255)
- added function dn to support linux device node name
convention: Converts from partition name to disk name (bnc #529580)
- fixed bootloader title setup if multiple kernels are installed
- restructured oem repartition code to allow use of parted.
parted does not allow to create custom partition id\'s they
are the result of a sequence of subsequently created partitions.
parted implementation will follow soon
- allow only bool (true/false) content for the oem-
*
boolean attributes

Fri Aug 21 14:00:00 2009 msAATTsuse.de
- remove kernel-.
*-base from all boot image descriptions
for suse-11.2. They don\'t exist anymore

Thu Aug 20 14:00:00 2009 msAATTsuse.de
- fixed spec file

Mon Aug 17 14:00:00 2009 msAATTsuse.de
- fixed boot default size setup (bnc #532371)
- fixed KIWIBoot::getStorageSize function, use blockdev
- fixed dialog input by calling setctsid before dialog
- removed duplicate creation of read/write filesystem
- changed title for install media to \"Install/Restore ...\"
- added support for language selection in displayEULA function.
The function now uses the same file names according to the
licenses.tgz file. If no language specific license file could
be found the function defaults to license.txt and if that file
also doesn\'t exist it defaults to EULA.txt (bnc #530497)

Fri Aug 14 14:00:00 2009 msAATTsuse.de
- fixed main::mount() method, setup of umountStack was wrong
now using mount destination for umount not source
- fixed isohybrid created partition table to be DOS compatible
This means the first partition starts at sector 64
- update documentation, add information about LVM and
repository priorities, differences between smart and zypper

Tue Aug 11 14:00:00 2009 msAATTsuse.de
- v3.74
- fixed VMFindSystem function in xenboot (bnc #530200)
- make rpm-force content a boolean value. Update schema
documentation, update LaTeX documentation
- removed pigz from kiwi-tools, it\'s packaged and
maintained by Alexander Graf now
- run fsck and resize2fs only on first boot of a clic mount
- don\'t wait for storage device if it\'s a loop
- use resize2fs -M if possible ( >= v1.41 )

Tue Aug 11 14:00:00 2009 msAATTsuse.de
- v3.73
- removed -extra kernel packages for 11.2, don\'t exist anymore
- added desktop kernel profile too boot images for 11.2
- fixed foreign addPackage and addArchive calls, make sure
the package/archive is added to the bootstrap section not
to the image section as we can\'t guarantee that a
type=\"image\" section exists
- run tagmedia at last

Tue Aug 11 14:00:00 2009 msAATTsuse.de
- v3.72
- fixed getSize function to calculate required inode count
for the subsequent mkfs ext2/3/4 call (bnc #528839)

Fri Aug 7 14:00:00 2009 msAATTsuse.de
- v3.71
- added ddn function and replace all occurrences of
a=$disk\"number\" with a=$(ddn $disk number) (bnc #529580)
- added --select packages for the --info option
- added checkmedia KIWIIsoLinux constructor parameter

Thu Aug 6 14:00:00 2009 msAATTsuse.de
- v3.70
- added dialog based progress information when restoring
the recovery archive files (bnc #510041)
- fixed evaluation of MKCLICFS_COMPRESSION (bnc #528743)
- clear screen after dialog window disappears (bnc #510041)
- fixed loop between CDMount and searchBIOSBootDevice
happening in oem ISO install mode
- fixed HAVE_USB check, usbcore is no longer a module
- added edd module to be present in isoboot

Wed Aug 5 14:00:00 2009 msAATTsuse.de
- v3.69
- changed oem-repart to allow oem-systemsize even if no home and
no swap partition was requested. by default the entire disk space
is used but if a oem-systemsize is set this value will be used
and therefore allows to have some space left on the disk
- fixed loop cleanup

Mon Aug 3 14:00:00 2009 msAATTsuse.de
- v3.68
- use dmsetup remove instead of kpartx -d
- wait for process to finish when sending int signal (bnc #525986)
- added support for hybrid ISO\'s. This feature exists with
openSUSE 11.2 or later. In order to use it add the attribute
hybrid=\"true\" to your iso type line. If you use the iso on
a read/write medium the isoboot code will search for a 0x83
partition used for writing OS data (bnc #496505)

Fri Jul 31 14:00:00 2009 msAATTsuse.de
- v3.67
- use blockdev to check partition and disk size (bnc #527016)
- use #!/usr/bin/env vmware in .vmx config file

Wed Jul 29 14:00:00 2009 msAATTsuse.de
- v3.66
- deactivate mbr id check on oem install (bnc #525682)
- fixed file finder for relative paths in createImageSplit
- update ec2 documentation, fixed public ari/aki table
- fixed solvable creation for migrate, also add the
option --report-packlist. Updated docu chapter about
migration

Thu Jul 23 14:00:00 2009 msAATTsuse.de
- v3.65
- added suse-11.2-JeOS template
- removed obsolte tools/cdtool/suse-isolinux
- fixed isoboot: added gfxboot.com if it exists
- leave libncursesw inside the initrd for dialog use
- added waitForUSBDeviceScan() function and wait only
if usbcore module could be loaded

Thu Jul 16 14:00:00 2009 msAATTsuse.de
- v3.64
- added displayEULA function (bnc #522985)
- added opensuseProduct in JeOS templates (bnc #522217)
- fixed xenbridge network setup if bridge name is set to
an empty string (bnc #515404)

Thu Jul 9 14:00:00 2009 msAATTsuse.de
- v3.63
- set hal lock for mapped luks device
- fixed satplugin due to satsolver api changes (bnc #521968)
- added suseSetupProduct function (bnc #520268)
- fixed ram only netboot image download (bnc #519055)
- added support for luks extension for usb image type (bnc #505782)
- added support for luks extension for xen image type (bnc #505782)
- added support for luks extension for iso image type (bnc #505782)
- fixed liveCD isolinux entry selection (bnc #521338)
- added openssl-certs to bootstrap section of SLE JeOS and
boot image templates to allow use of SLE update repositories
- removed required lib
* packages from delete sections
- be verbose when removing files from the initrd
- make luks password dialog more user friendly
- update schema documentation

Sun Jul 5 14:00:00 2009 msAATTsuse.de
- v3.62
- added check for packages really on media when using
fallback KIWIPattern resolver (bnc #517506)
- fixed combined mount with luks encoded read-write part (bnc #505782)
- added support for luks extension for oem image type (bnc #505782)
- fixed CD eject in oem CD/DVD install mode (bnc #519654)

Tue Jun 30 14:00:00 2009 msAATTsuse.de
- v3.61
- prepared KIWIImage to work with luks extension. This is not
a complete implementation so far, just a first start (bnc #505782)
- added basic support for LUKS extension for vmx image type
- fixed inclusion of custom tar archives if the image
description provides only a bootstrap section like the
isoboot data does

Mon Jun 22 14:00:00 2009 msAATTsuse.de
- v3.60
- allow inclusion of custom tar archives with new
element. This can be used to include custom branding without
special branding packages. This can also be used to include
any kind of data without the need for a package (bnc #515573)
- added virtio kernel modules to boot images (bnc #515543)
- improved support for obtaining XML information (bnc #513093)
- don\'t remove libx
*, 11.2 hwinfo is linked against libx86emu
- don\'t remove mkfs/fsck links, just a cleanup fix
- the inode issue comes back to haunt us yet again. The last go
around actually made things
*worse
* for things like vmdk that
allocate large disks, since 2x the number of files is probably
much smaller than the \'automatic\' calculation used for a disk of
that size. The attached patch fixes this by removing the
- -fs-numinodes option (which is useless, IMHO) and replaces it
with --fs-inoderatio. Kiwi will assume 16k for inode ratio if
not otherwise specified. We use the ratio to determine the number
of inodes, unless it is a smaller value than num_files
*2.

Fri Jun 19 14:00:00 2009 msAATTsuse.de
- v3.59
- fixed journal parameter handling in setupEXT2

Tue Jun 16 14:00:00 2009 msAATTsuse.de
- v3.58
- combine manual pages and kiwi cookbook into one
- added -persist option when calling nbd-client (bnc #513112)
- fixed clicfs mount for pxe type (bnc #513826)
- fixed checkType function if flags and filesystem attributes
are used together. Using these attributes together in one
type is redundant and therefore not correct but it should
not lead to an error (bnc #514412)
- removed useless setValidateRepositoryType method
- add support for xml file logging. This allows to keep
track on the temporary changes kiwi makes in the XML
description caused by for example commandline options
- fixed clone to search in default image path if source
is specified as relative path

Tue Jun 9 14:00:00 2009 msAATTsuse.de
- v3.57
- fixed kernel/initrd links in setupSUSEInitrd (bnc #507261)
- call searchBIOSBootDevice only on initial deployment
if the kiwi initrd is still in place for a subsequent boot
use the root variable from the kernel commandline to find
the boot disk, related to (bnc #507261)
- fixed setRepository function so that it does not
overwrite repositories marked with status=\"fixed\"
- added list of available patterns for --list-xmlinfo
- added support for ext4 filesystem, adapt 11.2 examples
- adapt 11.2 boot images for ext4

Fri Jun 5 14:00:00 2009 msAATTsuse.de
- v3.56
- fixed missing xen bootprofile in vmx and oem (bnc #510276)
- added ec2 bootkernel profile for vmx,oem,xen (bnc #510276)
- fixed dom0 Xen setup

Thu Jun 4 14:00:00 2009 msAATTsuse.de
- fixed call of xsl stylesheet in kiwi.pl

Tue Jun 2 14:00:00 2009 msAATTsuse.de
- v3.55
- default to \"no\" when the recovery dialog is displayed
- moved element into the section
added xsl stylesheet for transformation from scheme
version 2.4 -> 3.5 according to this change. Always
compress cpio images (bnc #509107)
- moved schemeversion to schemaversion (bnc #509107)
- allow use of zypper iso:// URL type in kiwi (bnc #498437)
- fixed documentation for bool value use (bnc #508614)
- fixed checkmedia reboot to happen immediately (bnc #509061)
- fixed checkmedia message (bnc #509060)

Tue Jun 2 14:00:00 2009 mbarringerAATTsuse.de
- Use the O_LARGEFILE flag when opening an image

Fri May 29 14:00:00 2009 mbarringerAATTsuse.de
- Giving more imagewriter feedback when a file cannot be opened.

Wed May 27 14:00:00 2009 msAATTsuse.de
- v3.54
- added kiwi --clone mode (bnc #505554)
- check for iso tool in KIWIIsoLinux.pm (bnc #478991)
- added fix catalog function to KIWIIsoLinux.pm (bnc #478991)
- set inode count for system partition only, even if
it has been specified via --fs-maxinodes (bnc #495135)
- fixed OEM recovery, set OEM_RECOVERY to the root device
not the recovery device (bnc #503653)

Mon May 25 14:00:00 2009 msAATTsuse.de
- v3.53
- fixed oem format=\"iso\" install mode (bnc #506983)
- use dialog for asking questions (bnc #503653)
- added resize_inode feature to filesystem before resizing.
This will reserve space so the block group descriptor
table may grow in the future (bnc #498683)

Mon May 25 14:00:00 2009 msAATTsuse.de
- fixed clicfs mount, regression from my last nfs fix

Mon May 18 14:00:00 2009 msAATTsuse.de
- v3.52
- don\'t reserve blocks for clicfs without cow (bnc #505580)
- reset IFS to standard value in CDDevice (bnc #505943)
- fixed clicfs mount over AOE,NBD (bnc #504652)
- fixed volid setup in case of spaces (bnc #500501)
- allow inclusion of boot image packages specified inside
the system image description. This feature is used to setup
branding packages which needs to be installed as part of
the boot image (initrd) (bnc #497888)
- rewrote KIWIIsoLinux.pm to allow bit/tri arch boot media
the code has not been tested for efi or ikr due to lack of
such machines (bnc #478991)
- fixed/changed clicfs over NFS use. When using a clicfs
image it\'s required that the clicfs filesystem is mounted
on the server and the container (fsdata.ext3) is exported
to the client. In that way it\'s consistent with all other
filesystem types

Fri May 15 14:00:00 2009 msAATTsuse.de
- v3.51
- set keytable to us in template files (bnc #504275)
- fixed live iso examples (bnc #504283)

Tue May 5 14:00:00 2009 msAATTsuse.de
- 3.50
- added bash quotation function (bnc #500537)
- fixed sap media changer call (bnc #486758)
- added more clic fixes, still not finished (bnc #497172)
- set inode count for system partition only (bnc #495135)
- added optional volid setup for iso\'s (bnc #500501)
- fixed group setup with correct group id (bnc #503117)
- fixed spec file requirement for mkisofs on sle10 (bnc #503333)
- update scheme documentation from oXygen
- don\'t set config file when calling modprobe in
suseStripKernel function
- fixed satsolver setup

Tue May 5 14:00:00 2009 msAATTsuse.de
- v3.49
- added clic fixes from coolo (bnc #497172)
- fixed quotation of realname for user setup (bnc #500537)
- fixed activateBootPartition code (bnc #500454)

Wed Apr 29 14:00:00 2009 msAATTsuse.de
- v3.48
- allow setting up vga for iso images too (bnc #480336)
- fixed permissions on recovery (bnc #489909)
- detect if it is required to pass -t iso9660 (bnc #498497)
- added support for clicfs for suse >= 11.2 (bnc #497172)
- don\'t run path generation for iso:// and file:// paths
if zypper is used (bnc #498437)

Mon Apr 27 14:00:00 2009 msAATTsuse.de
- v3.47
- fixed initrd cpio if xen type is requested (bnc #399230)
- added kernel parameter nombridcheck (bnc #498371)
- remove boot/grub/mbrid file from installed system
at first deployment to avoid conflicts on reboot
- set boot flag after repartitioning the device
- fixed template xorg.conf for 64 bit
- exclude install source device from being used as
SAP data storage device

Fri Apr 24 14:00:00 2009 msAATTsuse.de
- v3.46
- fixed format image creation for split type (bnc #497882)
- use -x option when copying system tree to avoid copying
still mounted filesystems like proc for example (bnc #497984)
- pass -t iso9660 when mounting CD/DVD devices. It\'s a kernel
bug that slows down the bandwidth if not passing that value
but the workaround is rock solid :) (bnc #493201)

Wed Apr 22 14:00:00 2009 msAATTsuse.de
- v3.45
- fixed kiwi_revision content in .profile
- fixed LVM repartition code if more than one VG exist
- deacticate the bios 0x80 check it\'s not safe enough
- don\'t reboot the system after OEMInstall, simply proceed
- allow non interactive installation procedure in
oem-sap-install mode. In case of multiple disks the smallest
one is used for the system (bnc #486758)

Wed Apr 22 14:00:00 2009 msAATTsuse.de
- v3.44
- fixed fstab setup of sapdata volume
- restrict packagemanager names to smart and zypper
- activate volume groups before calling mkinitrd
- fixed filesystem detection if root is on LVM
- added ovftool patch required for tech. preview
- fixed bootpartition id for install image creation
- fixed size of boot image partition when creating an
install image of type: virtual disk

Tue Apr 21 14:00:00 2009 msAATTsuse.de
- v3.43
- added missing entries in sysconfig/bootloader (bnc #495909)
- let udev load modules if modules.order is provided by
the kernel (bnc #493201)

Mon Apr 20 14:00:00 2009 msAATTsuse.de
- v3.42
- fixed recovery device setup (bnc #493878)
- make sure DHCPHADDR is an uppercase value (bnc #495557)
- fixed probeFileSystem to take care if the first 512byte
contains a bootloader (bnc #493489)
- fixed multicast activation/deactivation (bnc #356974)
- also check for include link to use --dereference when
copying the overlay tree (bnc #490128)
- added bool content type instead of text for
rpm-excludedocs (bnc #496382)

Tue Apr 7 14:00:00 2009 adrianAATTsuse.de
- Fix path creation on openSUSE 11.1 and later systems.
This fixes missing files on inst source medias created on SLES 11 systems.

Fri Apr 3 14:00:00 2009 msAATTsuse.de
- v3.41
- fixed URL quoting when passing credentials (bnc #491475)

Tue Mar 31 14:00:00 2009 msAATTsuse.de
- v3.40
- update manual pages. Patch by Peter Schinagl
- added functions to run X inside preinit (bnc #486758)

Mon Mar 30 14:00:00 2009 msAATTsuse.de
- v3.39
- added a domain attribute inside the xenconfig section in
config.xml to be able to distinguish whether a virtual disk
image should be a Xen dom0 host system or a Xen domU guest
system. If no domain is set a dom0 image will be created
- added xenServer function to check if we run a Xen host
or guest system. The bootloader setup is different for
dom0 or domU. Adapt setupBootLoader
* functions
- allow filesystem resizing to be used in isoboot
- added check functions SAPMemCheck, SAPCPUCheck
and SAPStorageCheck. They apply if the oem-sap-install
attribute is set for OEM images (bnc #486758)

Fri Mar 27 13:00:00 2009 msAATTsuse.de
- v3.38
- added root fstab entry for compressed rootfs (bnc #486017)
- fixed console setup when booting into a Xen guest
- added support for virtual disk images as Xen guest. This
means you can specify vmx|oem
and the resulting virtual disk image can boot as Xen guest
system. Patch by James Willcox

Thu Mar 26 13:00:00 2009 msAATTsuse.de
- v3.37
- added squashfs requirement for suse version > 10.1
- fixed solvable creation for repos without compressed
meta data (packages and .pat file)

Wed Mar 25 13:00:00 2009 msAATTsuse.de
- v3.36
- allow oem-reboot to take effect in recovery mode (bnc #487887)
- improved the --list-xmlinfo option which now also prints
information about the repositories used for the image
and it will print out the install size in kB by using
the satsolver. Users can so check how much space is
required to build the root tree of the image

Mon Mar 23 13:00:00 2009 mbarringerAATTsuse.de
- Adding \"-m\" to the imagewriter to start in a maximized window

Mon Mar 23 13:00:00 2009 msAATTsuse.de
- v3.35
- Add support for repository ordering

* For KIWI system image builds with zypper (requires openSUSE 11.1 zypper)

* For installation images generation [bnc #487712]
- removed KIWICollect_local.pm and also the --instsource-local
option from the code base. This module is no longer maintained
and all code related to this path went into KIWICollect.pm
- add --dest-dir check when --build runs
- fixed checkType function for iso tool check
- include xml man page source to git
- update template descriptions

Wed Mar 18 13:00:00 2009 msAATTsuse.de
- v3.34
- really fixed this path handling in upgrade mode
- fixed ignore element validation
- added suse-SLE10-JeOS template

Tue Mar 17 13:00:00 2009 mbarringerAATTsuse.de
- Ported the new imagewriter UI to MacOS
- MacOS USB key writing is now functional. \"Unsafe mode\" coming
soon

Tue Mar 17 13:00:00 2009 msAATTsuse.de
- v3.33
- added support for arch attribute in pattern names
- removed support for cromfs; dead and unmaintained fs
- added bootkernel attribute which allows to select a kernel
profile defined in the boot image description

Mon Mar 16 13:00:00 2009 msAATTsuse.de
- v3.32
- changed netboot descriptions >= 11.1 to provide diskless
kernel profiles named diskless-kdefault and diskless-kpae.
The standard diskless profile will no longer include a
kernel

Fri Mar 13 13:00:00 2009 msAATTsuse.de
- v3.31
- fixed broken CD/DVD mount path in isoboot workflow
- fixed vmxboot workflow for dmsquash setup
- fixed oemboot workflow for dmsquash setup
- fixed usbboot workflow for dmsquash setup

Thu Mar 12 13:00:00 2009 msAATTsuse.de
- v3.30
- added warning message before installing system (bnc #484793)

Wed Mar 11 13:00:00 2009 msAATTsuse.de
- v3.29
- added cdrkit-cdrtools-compat required for kiwi-desc-oemboot
- added experimental support for dmsquash filesystem type which is
a squashfs filesystem containing an ext3 filesystem. The mount of
the data happens via a device-mapper snapshot and allows
copy-on-write access (bnc #483444)
- fixed install image size calculation in case of a compressed
image. gzip -l was used but we ran into the >4GB bug mentioned
in the gzip manpage (bnc #484247)

Tue Mar 10 13:00:00 2009 msAATTsuse.de
- v3.28
- added crc-t10dif kernel module for 11.2 boot
- added x-bit to vmware .vmx file generated by kiwi
- don\'t use arch specific glibc in boot images
- don\'t specify cracklib but remove all possibly
installed versions in boot images

Mon Mar 9 13:00:00 2009 msAATTsuse.de
- v3.27
- fixed remote root mounts (bnc #483283)

Fri Mar 6 13:00:00 2009 mbarringerAATTsuse.de
- Fixing a build problem with the imagewriter on 10.3, it will now
fall back to a simple UI if the Qt version is < 4.4.0.

Fri Mar 6 13:00:00 2009 msAATTsuse.de
- v3.26
- added support for progress information when oem
install mode is active, SLE11 HP preload (bnc #479844)
- added suse-SLE11-JeOS template

Thu Mar 5 13:00:00 2009 mbarringerAATTsuse.de
- Fixed email address in imageburner subpackage in the spec file
- Added GPLv2 preamble to the source code

Tue Mar 3 13:00:00 2009 msAATTsuse.de
- v3.25
- set /etc/sysconfig/clock if timezone is set (bnc #481832)
- use displayName for install iso/usb images while prepending
the word Restore in front of the label text (bnc #481843)
- update manual page and kiwi help output
- added package kiwi-templates, JeOS templates. Wrote
one template so far which is: suse-11.1-JeOS
- added package kiwi-tools-burner, Matt\'s burner tool
- added option --build which allows prepare and create
in one step, useful for building templates

Mon Mar 2 13:00:00 2009 msAATTsuse.de
- v3.24
- if only one disk is available let the oem install code
use this disk without asking further questions (bnc #479842)
- allow setting up the kernel vga value (bnc #480336)
- added replaces=\"name\" attribute to the package element.
This allows you to install/upgrade a package by replacing
it with another one. Along with this change it\'s now also
possible to use --del-package to remove a package from an
existing root directory
- added diskless profile patch which needs brd driver
and the atlx network card driver (bnc #480740)

Fri Feb 27 13:00:00 2009 msAATTsuse.de
- v3.23
- fixed syslinux setup for vmx image types (bnc #478989)
- add system exception for syslinux on oem image types.
This is because we don\'t support OEMs with syslinux

Wed Feb 25 13:00:00 2009 msAATTsuse.de
- v3.22
- fixed this path evaluation in upgrade mode
- removed static passwd/shadow and group files from examples
- added md5 checksum test in OEM install mode (bnc #479842)
- added progress information in recovery mode (bnc #479844)
- fixed handling of oem-boot-title. If the title is set it
is prefered over the displayname attribute. Additionally
the given string is used as complete title name when oemboot
reconfigures the bootloader (bnc #479838)
- added support for an alternative bootloader [syslinux].
You can specify bootloader=\"syslinux\" as part of the type
setup and kiwi uses syslinux instead of grub. This works
for the _usb_ image type (bnc #478989)

Tue Feb 24 13:00:00 2009 msAATTsuse.de
- v3.21
- fixed KIWIManager key/value parsing when zypper is used.
If the URL itself contains the \"=\" sign the key=value
regular expression returns the wrong result and the URL
was broken (bnc #478673)

Mon Feb 23 13:00:00 2009 msAATTsuse.de
- v3.20
- added suse-11.2 boot image description (bnc #478461)
- prevent boot.rootfsck from being called, the tree was
already checked at image creation time (bnc #478351)
- allow use without any graphics boot data, also fixed text
based screen showed when isolinux has no graphics screen
- allow use of gfxboot-branding package as alternative to
the recommended gfxboot and gfxboot-devel packages in the
boot image description. If the devel package for gfxboot
is installed custom boot screen brandings are possible. If the
gfxboot-branding package is installed only the branding
provided by this package can be used.

Tue Feb 17 13:00:00 2009 msAATTsuse.de
- v3.19
- fixed oem-reboot feature in KIWILinuxRC.sh (bnc #474043)
- fixed searchBIOSBootDevice() to use the latest mbrid found
on all available disks. Also added a system exception if
no boot device could be found. Related to (bnc #474043)
- fixed netboot to call e2fsck instead of fsck which doesn\'t
exist. Also fixed e2fsck calls to use -p only instead
of -f -p (bnc #473355)
- add function canWrite() to check if we can write to
the destination before copying config / branding files
- fixed atftp option handling for the multicast setup
use \"multicast enable/disable\" notation
- fixed dhcpcd calls to use PXE_IFACE as parameter
- use DNSDOMAIN for DOMAIN if DOMAIN is not set
- use DNSSERVERS for DNS if DNS is not set
- added default split section if no split section is set in
config.xml. The contents of the default section are stored
in /usr/share/kiwi/modules/KIWISplit.txt. At the moment we
use /var in a temporary location (bnc #473826)

Mon Feb 16 13:00:00 2009 msAATTsuse.de
- v3.18
- make sure the OEM repartition code leaves an active flaged
boot partition at the end. This might be required for some BIOS
implementation to be able to boot from the device (bnc #475664)

Fri Feb 13 13:00:00 2009 msAATTsuse.de
- v3.17
- fixed creation of OEM install stick (bnc #475162)

Thu Feb 12 13:00:00 2009 msAATTsuse.de
- v3.16
- fixed OEM install mode, don\'t check for a filesystem on the
install disk it might not have one (bnc #475162)

Wed Feb 11 13:00:00 2009 msAATTsuse.de
- v3.15
- create the kiwicdinst temporary directory below the
image destination directory as we can\'t assume that there is
enough space available below /tmp for a complete OS image
- use iso-level 4 live CDs if files are stored as
uncompressed data on the ISO filesystem

Fri Feb 6 13:00:00 2009 msAATTsuse.de
- v3.14
- netboot: added patch when creating a filesystem on the root
partition. The validity is checked by fsck now instead of trying
to mount the device (bnc #473355)
- netboot: implement address notification if DHCP setup has
changed according to the IP data stored in the ldap directory
for the client (bnc #473329)
- fixed system hangup when moving data from shared memory
into boot partition. Fixed that by copying boot data before
overlayed mountSystem() is called, looks like a aufs bug
- pass the -p option to fsck instead of -y to prevent
interaction with the splash screen
- don\'t dereference symbolic links when copying the overlay
tree. Copy call changed to: cp -dR --remove-destination

Thu Feb 5 13:00:00 2009 msAATTsuse.de
- v3.13
- fixed partition commands to always set an active (boot)
partition. This is required by some BIOS\'s (bnc #472218)
- fixed virtual disk size calculation:

* don\'t use du --apparent-size it\'s not the real size used

* setup a safe inode count to ensure all files fits in for ext2/3
- fixed grub title setup, embed title string in a pair of
underscores which are not displayed by grub but avoid
menu title display problems

Wed Feb 4 13:00:00 2009 jcbornAATTsuse.de
- v3.12
- added the -f option to mkisofs call in cd mastering script
(bnc #465820)

Tue Feb 3 13:00:00 2009 msAATTsuse.de
- v3.11
- implemented support for ATA over Ethernet (bnc #441832)
- fixed ovftool call in case of terminal logging (bnc #472009)
- fixed xenconfig to avoid absolute paths (bnc #472010)

Tue Jan 27 13:00:00 2009 msAATTsuse.de
- v3.10
- include inst-source branch changes from abuild team (r1875):

* fixed KIWICollect_local handling of baselibs packages in
debug and source package collection. Fixed collector code
- fixed xen initrd compression to make xm tool happy
- fixed migration table and repo solver (bnc #469372)
- fixed log call on undefined value in recursion (bnc #469366)
- added optional bool element: which
allows to use the kiwi initrd persistently for OEM
based images (bnc #467947)

Tue Jan 20 13:00:00 2009 msAATTsuse.de
- v3.09
- added gfxboot and kiwi-tools required for SLE11 images
- fixed missing oem-reboot reference in KIWIScheme.rnc
- added non interactive option when calling zypper dist-upgrade
- fixed setup of splash cpio, use compression level 1 to
avoid problems when Xen uncompresses the initrd
- Fixes for the kiwi-instsource module:

* changed return value handling, fixed missing retvalues

* fixed unclear \"die\" exits

* enhanced plugin progress log

* handle debugmedium as separate medium with media.1 subdir and separate
create_package_descr call (bnc #458645)

* fixed createBootPackageLinks which looped infintely in certain
conditions (no bug reported, fixed as found)

Mon Jan 19 13:00:00 2009 msAATTsuse.de
- v3.08
- fixed installation mode, incomplete MBR ID check

Mon Jan 19 13:00:00 2009 msAATTsuse.de
- v3.07
- fixed installation mode from CD, wrong disk check happened
- fixed installation mode, added size check before dump

Fri Jan 16 13:00:00 2009 msAATTsuse.de
- v3.06
- fixed installation mode. wrong partition was mounted.
According to this the install image file wasn\'t found

Fri Jan 16 13:00:00 2009 msAATTsuse.de
- v3.05
- fixed KIWIXML object construction in KIWIBoot.pm. The image
type parameter was unknown to the xml instances
- added Documentation for inst-source creation by Jan
- KIWICollect_local fix: FLAVOR became a variable instead of
info. Patch by Adrian

Thu Jan 15 13:00:00 2009 msAATTsuse.de
- v3.04
- fixed md5 output naming if .raw is part of the dir (bnc #459415)
- fixed bootloader setup to use the grub binary from the initrd
- fixed size calculation for data plus filesystem overhead
if only the root tree is present.

Thu Jan 8 13:00:00 2009 msAATTsuse.de
- v3.03
- added LVM support for oemboot (bnc #447059)
- added LVM support for vmxboot (bnc #447059)
- added LVM support for usbboot (bnc #447059)
- added support for a custom displayname which can be
specified in config.xml and is used the boot menu for
isolinux and grub (bnc #446455)
- restructured/cleaned up oemboot boot code and prepared
it for use with LVM, related to (bnc #447059)
- fixed integration of the OVF image format created
by the ovftool from VMware (bnc #464810)
- fixed missing eval output in case of wrong eval call
- print internal backtrace only if --debug is set
- added check for broken root trees. While setting up the
root tree kiwi marks it as broken and after a successful
preparation the tree looses the broken mark
- removed jabber log functions, never used

Tue Dec 30 13:00:00 2008 msAATTsuse.de
- v3.02
- fixed package repo for SLE11 boot images (bnc #461671)
- fixed package setup for 11.1/SLE11 boot images (bnc #457229)
- fixed remote repo paths for kiwi examples
- fixed documentation for ec2

Tue Dec 23 13:00:00 2008 msAATTsuse.de
- fixed NFS mount install command problem (bnc #455963)
- fixed 11.1 pxe example package list

Fri Dec 19 13:00:00 2008 msAATTsuse.de
- added ohci-hcd.ko to SLE10 usbdrivers section

Thu Dec 11 13:00:00 2008 jcbornAATTsuse.de
- fixed missing S/390 eltorito entry (bnc #439907)

Wed Dec 10 13:00:00 2008 msAATTnovell.com
- added check for system map when stripping kernels

Tue Dec 9 13:00:00 2008 snorpAATTnovell.com
- fix pigz so that it can decompress .spl files (bnc #457633)

Thu Dec 4 13:00:00 2008 msAATTsuse.de
- move usb device scan to probeUSB function (bnc #455993)
- call usb device scan only if a usb host controller was
found and successfully loaded (bnc #455993)

Wed Dec 3 13:00:00 2008 msAATTsuse.de
- fixed unified/split based oem second boot phase (bnc #450780)
- added usb-storage device scan detection (bnc #455993)

Wed Dec 3 13:00:00 2008 msAATTsuse.de
- added slepos functions (bnc #349181)
- changed sfdiskGetPartitionSize to calculate the entire
disk size based on max cylinders -1

Tue Dec 2 13:00:00 2008 msAATTsuse.de
- fixed split based boot configuration (bnc #450780)

Tue Dec 2 13:00:00 2008 msAATTsuse.de
- added deviceMap to allow custom partition device names by id
- fixed sfdiskGetPartitionSize to report the correct size if
called on a whole disk and not on a partition

Fri Nov 28 13:00:00 2008 msAATTsuse.de
- fixed build
- fixed filesystem blocksize value for ramdisk usage on
old style live systems. the ramdisk code as well as the
filesystem uses 4k blocksize in that case

Fri Nov 28 13:00:00 2008 msAATTsuse.de
- don\'t evaluate bios edd disk-by-id links (bnc #449757)
- fixed disk partition size calculation in oemboot (bnc #449757)
- update pigz tool, used in suse studio only

Thu Nov 27 13:00:00 2008 msAATTsuse.de
- changed from sector based calculation to cylinder based
calculation for partitions created with parted
- added ifplugd to suse-11.1 examples
- fixed setup of kiwi_type when in creation mode
- added versioned requires for kiwi-instsource
- updated dotty dependency graph
- make sure MBR disk labels starts with first byte > 0xf
- allow prebuilt boot image path to be the same as the
destination directory for the final image
- make fdisk output part of the log file when oemboot
repartitions the disk

Tue Nov 25 13:00:00 2008 msAATTsuse.de
- moved setupPackageKeys() to the beginning of prepare (bnc #447025)

Tue Nov 25 13:00:00 2008 msAATTsuse.de
- added usb module support for netboot images
- make sure proc is not mounted when calling init
- respect atftp option name convention for multicast
- allow losetup to be used on older systems. This means if
the call with option -s -f fails kiwi tries to manually find
a free loop device
- manually load the usbhid driver to support USB keyboards
while inside the initrd

Fri Nov 21 13:00:00 2008 msAATTsuse.de
- added check for USB stick size before deployment (bnc #446450)
- fixed documentation about usbdrivers section (bnc #448085)
- added usb hid modules to iso|oem and usbboot (bnc #448085)
- compare resolv.conf files only if they exist
- fixed CDDevice() function to report devices correctly
- fixed bindLoopDevice(), possible race condition
- compare resolv.conf files only if they exist

Fri Nov 21 13:00:00 2008 msAATTsuse.de
- fixed filesystem setup for netboot partitions (bnc #415402)
- fixed atftp multicast handling, disabled for compressed
images because you can\'t seek in a pipe (bnc #356974)

Fri Nov 21 13:00:00 2008 jcbornAATTsuse.de
- removed some mkisofs options for ppc (bnc #446416)
- added docu dir to directory.yast create list (bnc #447486)

Tue Nov 18 13:00:00 2008 msAATTsuse.de
- added setupPackageKeys function (bnc #447025)
- fixed getStorageSize() [fdisk] return value (bnc #446812)
- added kernel consistency check (bnc #445309)
- set framebuffer to verbose mode in sax init script
- added SLE[SD]11 boot image templates used by JeOS

Tue Nov 18 13:00:00 2008 msAATTsuse.de
- fixed parted type setup and storage size function

Mon Nov 17 13:00:00 2008 jcbornAATTsuse.de
- include inst-source branch changes from autobuild team (r1776):

* changed cp -v to cp -a to preserve timestamps (bnc #445734)

* removed false cp command (wrong targetdir) (bnc #444705)

* added options for EFI boot

* create volid string (patch by Olaf Hering

* fixed quoting in tools/cdtool/suse-isolinux for
hfs-volid string (bnc #444304)

Mon Nov 17 13:00:00 2008 msAATTsuse.de
- fixed mountSystemUnified() to move the union mount points
into the system which allows remounting tmpfs (bnc #442612)
- fixed evaluation of bool value (bnc #444996)
- fixed USBStickDevice() to check for config.isoclient too.
This is needed if a live iso was converted to boot from USB
stick as described in Bug (bnc #441278)
- fixed grub default language setup in suseGFXBoot
- changed examples default source path to point to network
- update documentation, added chapter how to create a local
SUSE installation source and reference it for the examples
- include inst-source branch changes from autobuild team (r1761):

* removed false copy statement (wrong targetdir)

* fix handling of addarch, this must not use substring searches to
detect duplicate architectures.

Thu Nov 13 13:00:00 2008 jcbornAATTsuse.de
- include inst-source branch changes from autobuild team (r1753):

* suse-isolinux: call parameters appear in logfile now

* suse-isolinux: fixed missing test for ppc specialities

Thu Nov 13 13:00:00 2008 adrianAATTsuse.de
- include inst-source branch changes from autobuild team (r1753):

* fix handling of additional architectures not part of fallback list.

* Disable version require handling until bugs are solved.

* remove obsolete code

* a bit more debug output

Wed Nov 12 13:00:00 2008 msAATTsuse.de
- kiwi version freeze for SUSE 11.1 => v3.01
- include inst-source branch changes from autobuild team (r1750):

* moved suse-isolinux script to cdtool tools directory

* install suse-isolinux along with kiwi-instsource

* removed an unneccesary hash parameter

* changed the return value of KIWICollect::createBootPackageLinks
(verbose debugging plus failed exit)

* changed return value of KIWIRepoMetaHandler::loadPlugins:
return a pair of numbers showing discrepancies between available
and loaded plugins (todo: implement exceptions for disabled pl.)

* fixed a bug in HTTP access: accessing repos.suse.de failed due
to a wrong regex

Thu Nov 6 13:00:00 2008 msAATTsuse.de
- v3.01
- start udevd in preinit stage (bnc #442302)
- evaluate value for oem-boot-title in initial bootloader
configuration too (bnc #442361)

Tue Nov 4 13:00:00 2008 msAATTsuse.de
- v3.00
- removed asus eepc modules from diskless netboot (bnc #442273)
- allow alternative tmp dir set with TMPDIR (bnc #441834)
- adapt iso live image to allow boot from stick (bnc #441278)
- fixed netboot boot setup for overlayed NBD root
- added image file link with filesystem extension

Fri Oct 31 13:00:00 2008 msAATTsuse.de
- v2.99
- fixed usbboot to check for LOCAL_BOOT correctly
- fixed suse-11.1/suse-live-stick earlyxdm meta data

Thu Oct 30 13:00:00 2008 msAATTsuse.de
- v2.98
- enhanced suse-11.1/suse-live-stick example to make use
of the yast2-firstboot configuration step
- use option -A in mkisofs instead of genisoimage -A
- added support for zypper\'s target architecture. kiwi allows
to set the option --target-arch to one of the following
values: i586, x86_64, armv5tel or ppc. This option should be
used for building cross arch images. Please note:
- -

* Installing packages for another than the build machines
architecture additionally requires an environment setup which
allows running binaries of that architecture.

* One approach to do this is to use QEMU in user mode. Just copy
the static qemu binaries from /usr/bin/qemu
* into the root/usr/bin
directory of your image description. Last step before calling
qemu is to run the /usr/sbin/qemu-binfmt-conf.sh script to
prepare the environment
- -
Thanks to Jan-Simon Moeller, Martin Mohring and Michael Andres
for their effort

Mon Oct 27 13:00:00 2008 msAATTsuse.de
- v2.97
- fixed SaT plugin due to API changes (bnc #436249)
- added the same padding to tagmedia as used with mkisofs
by default this are 150 sectors (bnc #434563)
- fixed build and warnings

Wed Oct 22 14:00:00 2008 msAATTsuse.de
- v2.96
- fixed shell exception if redirected to /dev/console (bnc #413474)
- added XML catalog for XSL stylesheets
- added functions to activate/deactivate trace output
- turn runlevel 4 requests into runlevel 5 for suse
- added usage message for --verbose option
- fixed POSIX based date call

Tue Oct 21 14:00:00 2008 msAATTsuse.de
- v2.95
- run boot shell only in debug mode (bnc #403207)
- test for genisoimage before calling it, fixed spec file
- export ZYPP_CONF to point to /var/cache/kiwi/zypp.conf
- removed warn overwrite, use eval { Carp::longmess ... }
- update suse-11.1/suse-live-stick example to serve as
1GB stick with KDE4 + dmidecoded X11 setup

Mon Oct 20 14:00:00 2008 msAATTsuse.de
- v2.94
- fixed oemboot to log fdisk output when re-partitioning
- fixed KIWILinuxRC /dev/ram
* check in mountSystemUnified
- fixed oemboot to resize read-write filesystem

Fri Oct 17 14:00:00 2008 msAATTsuse.de
- v2.93
- fixed suse-11.1/suse-live-stick example, wrong pattern
- added file check before calling commands with qxx

Thu Oct 16 14:00:00 2008 msAATTsuse.de
- v2.92
- added backtrace in case of error (bnc #435991)
- make the suse-11.1/suse-live-stick example more robust
- added check for possibly existing oem partition file
- put the perl bindings into a common KIWI namespace

Thu Oct 16 14:00:00 2008 msAATTsuse.de
- v2.91
- don\'t remove scsi_id.config from initrd (bnc #435093)

Mon Oct 13 14:00:00 2008 msAATTsuse.de
- v2.90
- changed grub and fstab setup to use disk ID labels (bnc #434806)
- use diskID labels for UNION mounts and INITRD params (bnc #434806)
- added check media label via genisoimage -A (bnc #434104)
- fixed setupKernel to change the sysconfig.kernel template file
instead of creating a new one (bnc #435060)
- fixed kernel/initrd links for unified oem|vmx boot
- fixed mbrid detection for unified systems
- fixed netboot local boot, cmdline too long
- fixed parted type setup

Thu Oct 9 14:00:00 2008 msAATTsuse.de
- v2.89
- added support for F3 -> textmode at boot time (bnc #391313)
- moved activate/boot code into common functions
- fixed typo in cookbook, thanks to nick://descriptor
- added option to select between fdisk and parted
- update scheme documentation according to last change
by Adrian

Wed Oct 8 14:00:00 2008 msAATTsuse.de
- v2.88
- added option --check to tagmedia call in KIWIIsoLinux

Tue Oct 7 14:00:00 2008 msAATTsuse.de
- v2.87
- fixed permissions of live iso root (bnc #432971)
- fixed creation of sat solvable (bnc #32477)

Tue Oct 7 14:00:00 2008 msAATTsuse.de
- v2.86
- fixed build, quick install guide was removed
- fixed getInstSourceSatSolvable() for online repos

Mon Oct 6 14:00:00 2008 msAATTsuse.de
- v2.85
- fixed getPackageAttributes() to respect profiles
- removed completely outdated kiwi.quick.pdf
- fixed udev initial setup, default rules in /lib/udev/rules.d
- added support for openSUSE project patterns (bnc #432477)
- added required kernel packages -base, -extras according
to kernel split for SUSE 11.1 (bnc #432482)

Mon Oct 6 14:00:00 2008 msAATTsuse.de
- v2.84
- fixed instsource support for SLES10 (gzip problems)
- fixed instsource rpm handling for i686 arch
- added i586 <> i386 loader directory hack
- fixed creation of content file
- added support for Beta version handling
- added debug output for module loader

Fri Oct 3 14:00:00 2008 cthielAATTsuse.de
- fix with latests kernel split

Fri Sep 26 14:00:00 2008 msAATTsuse.de
- v2.83
- added suse 11.1 / SLES11 examples
- fixed patternType evaluation for zypper
- fixed USB stick partitioning, clean table first
- added architecture information for sat solv cache
- added xenbridge element to setup Xen bridge networking
- fixed file:// usage in xenconfig, this setup requires
a full qualified path name according to the Xen docs
- fixed xenboot arch setup for kernel package
- fixed product parsing
- moved suse-isolinux (m_cd) code into KIWIIsoLinux.pm
perl based module.

Thu Sep 25 14:00:00 2008 msAATTsuse.de
- v2.82
- removed plugins from svn.berlios.de: moved to
https://forgesvn1.novell.com/svn/opensuse/trunk/distribution/\\
instsource-plugins/suse-110
- also the plugins will be moved from the kiwi-instsource package to the
packages kiwi-instsource-plugins--

Tue Sep 23 14:00:00 2008 msAATTsuse.de
- v2.81
- fixed KIWIPattern.pm, initial value of AATTpackages

Tue Sep 23 14:00:00 2008 msAATTsuse.de
- v2.80
- included updates and weak-updates path for aufs into
boot image descriptions, related to (bnc #428232)

Tue Sep 23 14:00:00 2008 msAATTsuse.de
- v2.79
- fixed kernel updates inclusion (bnc #428232)

Thu Sep 18 14:00:00 2008 msAATTsuse.de
- v2.78
- adapted new location of aufs module in 11.1 (bnc #428232)
- update kiwi manual pages, fixed usage message
- removed smart from BuildRequires, as it will be removed
from the internal build service

Tue Sep 16 14:00:00 2008 msAATTsuse.de
- v2.77
- added support for parted in kiwi. All partition tasks inside
KIWIBoot.pm and in linuxrc are now possible with parted. Even
though there is one exception which is the oemboot linuxrc.
the repartition code in this boot code is still based on fdisk.
All changes required due to bug (bnc #413637)
- added log excerpt information and fixed exit code handling
if kiwi operation doesn\'t take place in a screen session. Last
part of the fix is related to (bnc #420320)
- fixed detection of boot device in oemboot by using the BIOS
id value 0x80. This fixes the detection of the wrong storage
device when oemboot starts the repartitioning of the device
on first boot. The change requires the edd module to be present
in the boot image (initrd)
- added custom MBR ID for virtual disks. If the BIOS 0x80 check
fails we still have the chance to find the correct boot device
by the /boot/grub/mbrid file written by kiwi itself

Mon Sep 15 14:00:00 2008 msAATTsuse.de
- v2.76
- fixed files (-f) check in migration mode (bnc #419219)
- added quoting for excluded param values (bnc #419219)
- added checkBrokenLinks() function (bnc #419219)

Tue Sep 9 14:00:00 2008 msAATTsuse.de
- v2.75
- don\'t use i686 glibc for the boot images, it could cause
the init process to hang and therefore locks the boot process
completely (bnc #310001)
- added schema adaptions for instsource creation
- make create instsource a non root task, requested
by autobuild team (mls,jcborn)

Fri Sep 5 14:00:00 2008 msAATTsuse.de
- v2.74
- Patch by Peter Bowen which causes zypper to use a private
copy of zypp.conf (rather than the host system copy) and
provides an interface to modify the config file.
- Patch by Peter Bowen which allows automatic exclusion of
documentation during install. Smart and zypper both support
setting options that pass the right flag to rpm on the
backend.
- update documentation plus scheme documentation

Wed Sep 3 14:00:00 2008 msAATTsuse.de
- v2.73
- fixed weak-updates handling (bnc #419988)
- fixed bindLoopDevice to look for free loop device by
using losetup -f, thanks to Till for the hint
- added baseUpdateSysConfig function to KIWIConfig.sh
which allows updating /etc/sysconfig/.. variables

Fri Aug 29 14:00:00 2008 msAATTsuse.de
- v2.72
- don\'t open a network log port by default, option required
- don\'t use filesystem options by default, provided options
- fixed handling of other than name=\"drivers\" sections
- fixed deb-dir repo type for smart (bnc #421958)
- added product support by Peter Bowen along with the
existing packages / pattern support (bnc #422018)

Wed Aug 27 14:00:00 2008 msAATTsuse.de
- v2.71
- fixed cache bind mount, only bind mount kiwi and package
manager cache directories to avoid conflicts with others

Mon Aug 25 14:00:00 2008 msAATTsuse.de
- v2.70
- added support for repository alias name
- added support for repository priority (smart only)
- added better schema documentation

Fri Aug 22 14:00:00 2008 msAATTsuse.de
- v2.69
- fixed cache usage, need bind mount in early prepare (bnc #417457)
- fixed channel names, don\'t use PID here (bnc #417457)
- zypper: keep packages from remote repos only (bnc #419380)
- allow --set-repo/--set-repotype for migrate mode (bnc #419219)
- added partition format patch for netboot by SLEPOS team

Thu Aug 21 14:00:00 2008 msAATTsuse.de
- v2.68
- don\'t use the zypper service-
* commands (bnc #418994)
- added recommends handling for zypper according to the
value of the patternType/patternPackageType (bnc #418817)

Wed Aug 20 14:00:00 2008 msAATTsuse.de
- v2.67
- added zypper option --keep-packages (bnc #417457)

Mon Aug 18 14:00:00 2008 msAATTsuse.de
- v2.66
- disabled build of images in spec file
- fixed adapter type detection in KIWIBoot (bnc #417461)
- fixed use of package manager cache. kiwi uses a global cache
for building now. This is below /var/cache/kiwi/.
The package manager data is temporarly bind mounted into the
image root system for any package manager operation.
This allows a faster processing within the second stage of
the image preparation and also alows re-use of already
downloaded remote packages (bnc #417457)
- changed locking process due to cache handling changes.
This is related to (bnc #417457)

Mon Aug 11 14:00:00 2008 msAATTsuse.de
- v2.65
- code cleanup, introduce partition table functions:
getStorageSize and setStoragePartition to encapsulate
disk partitioning. This is related to (bnc #413637)
- allow ramdisk size setup via kernel parameter (bnc #412457)
- added diskless drivers and bootsplash support (bnc #415662)
- removed unused X11 library requirement (bnc #413311)
- added migration chapter to the cookbook (bnc #412215)
- removed unused tools suse-instsource and createLiveCD
Please refer to the kiwi documentation or the wiki page
for a howto to build an example iso image

Thu Jul 31 14:00:00 2008 msAATTsuse.de
- v2.64
- fixed shell exception on /dev/console (bnc #413474)
- added x bits on /init script (bnc #413610)
- increased boot timeout for lilo configuration
- improved migration code, makes use of patterns now and
checks with SaTSolver whether the package exists in the
solvables or not. I also added the possibility to add
repositories while calling kiwi --migrate (bnc #412215)
- changed date calls in KIWILog to use localtime()

Tue Jul 29 14:00:00 2008 msAATTsuse.de
- v2.63
- don\'t use umount -l (bnc #413122)
- add arch attribute to section (bnc #412869)
- fixed suseGFXBoot to still allow setting up the splash screen
even if gfxboot is missing, these two actions should be independent
- fixed automatic boot image building if the type setup
is part of a profiled preferences section
- fixed KIWITest and KIWITestResult modules which uses
ublessed object references when calling module methods
- fixed use of satsolver. It\'s required to queue jobs as
how, what pairs otherwise the result is not solved

Mon Jul 28 14:00:00 2008 msAATTsuse.de
- v2.62
- added ppc related lilo boot functions and rewrote the
kernelList function. Hopefully this doesn\'t break other
bootloader configurations
- fixed build for ia64

Thu Jul 24 14:00:00 2008 msAATTsuse.de
- v2.61
- added Amazon EC2 chapter in kiwi cookbook
- removed use of kernel-xenpae for >= 11.0, doesn\'t exist there
- fixed suseStripKernel() function to include module dependency
checking. Patch by Olaf Hering . Thanks Olaf
- fixed reading md5 file in isoboot suse-linuxrc (bnc #411673)

Wed Jul 23 14:00:00 2008 msAATTsuse.de
- v2.60
- added ec2 example for suse 11.0: suse-ec2-guest (bnc #367138)
- fixed KIWIMigrate according to current scheme (bnc #411088)
- allow redirection of the log messages to a console set
by the kernel parameter kiwistderr=... (bnc #411304)
- added suse-11.0 examples and reorganized the doc tree
- added suse-11.0 netboot description for ppc and reorganized
the boot tree to allow different architectures
- fixed KIWISatSolver queue code and binding

Wed Jul 16 14:00:00 2008 msAATTsuse.de
- v2.59
- fixed KIWIMigrate copy of files with spaces (bnc #410295)
- removed unneeded package inclusion for libcom_err. This package
is required by other core components and therefore resolved
correctly by the package manager. (bnc #410722)
- update migration table for openSUSE 11.0
- fixed suseStripKernel function to work with ppc
- added suseCloneRunlevel function which allows to
clone the runlevel 3 links into the given runlevel. The
function also activates the runlevel in /etc/inittab if
not yet done. This function is relevant for systems booting
into non standard runlevels like (4)
- added missing package requirements:

* perl-XML-LibXML-Common

* perl-XML-SAX

Mon Jul 14 14:00:00 2008 msAATTsuse.de
- v2.58
- check for DHCPSID value too (bnc #408668)
- allow multiple preferences sections in config.xml (bnc #407981)
- allow creation of Amazon aki/ari image with the ec2 type (bnc #367138)
- fixed importBranding for usbboot, it should be called
at first boot only and allow users to change their boot
data persistently
- introduction of new attribute \"local\" (values boolean) in
element. Tells kiwi to use link instead of lwp-download (much faster)
For OBS scenario local trees will be used. Patch by Jan Bornschlegel
- fixed KIWIPatternsPlugin: use the correct subdir name in case
of single subdir trees. Patch by Jan Bornschlegel

Thu Jul 10 14:00:00 2008 msAATTsuse.de
- v2.57
- moved from bzip2 to gzip for the recovery archive (bnc #401749)
- install grub into recovery partition if present (bnc #407983)
- fixed OPTIND initial value for getopts shell builtin
- Integration of head functionality in KIWIArch.pm, KIWIArchList.pm
and respective unittest. Patch by Jan Bornschlegel

Thu Jul 10 14:00:00 2008 msAATTsuse.de
- v2.56
- fixed relocateCatalog function for udf style iso\'s

Wed Jul 9 14:00:00 2008 msAATTsuse.de
- v2.55
- use udf mount for installable iso images
- use getopts build in function to parse Echo options
- make the USB controller configurable in
- added new element to group to specify not only
the fallback list but also the head elements Integration
in KIWIArchList follows. fixed by Jan Bornschlegel

Tue Jul 8 14:00:00 2008 msAATTsuse.de
- v2.54
- added sles option in guestOS setup of
- better stylesheet convert20to24.xsl with help from Tom
- fixed copy of files in netboot linuxrc

Mon Jul 7 14:00:00 2008 msAATTsuse.de
- v2.53
- added support for the openSUSE buildservice internal
obs:// type. This is a follow up for bug (bnc #404460)
- fixed use of uninitialized values in instsource creation
- fixed xsltproc output in case of an error message

Mon Jul 7 14:00:00 2008 jcbornAATTsuse.de
- v2.52
- allow multiple groups in

Mon Jul 7 14:00:00 2008 msAATTsuse.de
- v2.51
- allow Echo function to use escape sequences (bnc #397949)
- instsource cleanup fixes by Jan Bornschlegel

Fri Jul 4 14:00:00 2008 msAATTsuse.de
- v2.50
- added SUSE 11.1 (base SLE11) boot image descriptions
- use zypper as packagemanager for 11.1 descriptions

Wed Jul 2 14:00:00 2008 msAATTsuse.de
- v2.49
- added support for netboot interrupt (bnc #397949)
- removed guest configuration attributes from section
and add new main sections for VMware -> and
for Xen -> . This change requires a new scheme
version 2.4 and the xsl stylesheet convert20to24.xsl. The
conversion will _not_ add one of the new xen|vmareconfig
sections but removes the invalid VM configuration related
attributes from the packages sections (bnc #397528)

Mon Jun 30 14:00:00 2008 msAATTsuse.de
- v2.48
- support this:// url type in boot attribute (bnc #404460)

Fri Jun 27 14:00:00 2008 msAATTsuse.de
- v2.47
- fixed xenboot images.sh, don\'t remove mandatory files
- fixed initial semaphore locking state

Thu Jun 26 14:00:00 2008 msAATTsuse.de
- v2.46
- skip USB stick detection in QEMU environment (bnc #402851)
- fixed kiwi processing if
*.kiwi file is used as xml description

Wed Jun 25 14:00:00 2008 msAATTsuse.de
- v2.45
- update documentation: new vmx format \'ovf\' added to table
- fixed branding import, silent-
* pictures were missing
- added patch by Adrian to fix the config.xml lookup
- add versioned requires for kiwi-desc-
* packages

Tue Jun 24 14:00:00 2008 msAATTsuse.de
- v2.44
- added support for creating the open virtual file format. The
support is limited to the capabilities of the ovtool provided
by VMware. At the moment kiwi expects the program \"ovtool\" to
be present in the root execution path (bnc #399558)

Thu Jun 19 14:00:00 2008 msAATTsuse.de
- v2.43
- added support for additive size setup (bnc #401747)
- fixed race condition when searching for free loop (bnc #402848)
- removed cdboot directory from isoboot descriptions. kiwi
creates the isolinux configuration files now in KIWIImage.pm
- fixed partition size calculation in oemboot
- fixed xenboot, make it smaller, remove unused kernel
modules (network,scsi,cdrom,reiserfs,fat,vfat)

Wed Jun 18 14:00:00 2008 msAATTsuse.de
- v2.42
- call grub with a device map to avoid probing
- create a generic boot image description for SLE
- update documentation, some words about checkprebuilt

Tue Jun 17 14:00:00 2008 msAATTsuse.de
- v2.41
- added testsuite patches by Pavel Nemec (bnc #400817)
- fixed iso images if built with prebuild boot image. The isoboot
boot images build standalone are missing important isolinux
files because they were removed in createImageCPIO()
- fixed setupFirstBootYaST() to work on SUSE 11.0
- added configuration details suggested by VMware
- added ensconce patches by Nat Friedman which are related
to the SUSE studio project only.

Mon Jun 16 14:00:00 2008 jcbornAATTsuse.de
- v2.40

* instsource creation:
- extracted loadable plugins for metadata creations
those reside now in the modules/plugins subdirectory
- implemented new metadata plugin controller class
- reorganized methods from KIWICollect to KIWIUtil

Thu Jun 12 14:00:00 2008 msAATTsuse.de
- v2.40
- allow xen bootprofile for isoboot images (bnc #399600)
- added bzip2 application as part of the boot images
- added experimental system recovery implementation
- expect ensconce package manager to be part of the image
description. This change is only important for studio

Tue Jun 10 14:00:00 2008 msAATTsuse.de
- v2.39
- fixed semaphore array cleanup code
- added kiwi_ prefix to all .profile variables
- fixed checkFileSystem function to use type=auto if the
filesystem couldn\'t be detected by the file util (bnc #398381)
- added svn revision information to .profile and let it
appear in /var/log/boot.kiwi during first deployment
- allow package manager to be set on the commandline
- fixed missing file close, patch by Nat Friedman
- added creation of /etc/sysconfig/bootloader
- fixed oemboot repartition code if no swap, no home and a
recovery partition was specified

Mon Jun 9 14:00:00 2008 msAATTsuse.de
- fixed update check for split images (bnc #398515)
- fixed initrd setup for netboot split images (bnc #398515)

Mon Jun 9 14:00:00 2008 msAATTsuse.de
- fixed getRemovableUSBStorageDevices function to work on
SUSE 11.0 due to /sys layer changes (bnc #398513)
- fixed detection of System.map file when setting up the bootloader
during netboot deployment in setupSUSEInitrd (bnc #398515)

Thu Jun 5 14:00:00 2008 msAATTsuse.de
- fixed mountSystemUnified: read/write part is ext3 now
- code cleanup: put all bootloader related kiwi module code
into the functions: setupBootLoaderStages setupBootLoaderConfiguration
and installBootLoader. This happened to be able to include
new bootloader types more easily

Thu Jun 5 14:00:00 2008 msAATTsuse.de
- fixed smart call in setupSignatureCheck (bnc #397365)

Wed Jun 4 14:00:00 2008 msAATTsuse.de
- fixed isolinux text boot message (bnc #396759)

Tue Jun 3 14:00:00 2008 msAATTsuse.de
- added support for splashy. To activate it replace the
packages bootsplash and bootsplash-(branding|theme)-
* with
the package: splashy in your boot image description. Also make
sure the package pcre stays in the boot image it\'s required
for splashy. At the moment we stick to the old bootsplash
system by default

Tue Jun 3 14:00:00 2008 msAATTsuse.de
- added getDiskID function which is able to turn a given
standard device name into the udev ID based representation.
The function is currently not used but will be in the future

Tue Jun 3 14:00:00 2008 msAATTsuse.de
- added checkmedia support for iso images. kiwi will sign each iso
with an md5sum using the tagmedia program. If the option --isocheck
is specified when calling the create step an additional boot
menu entry is created which allows to check the media

Sat May 31 14:00:00 2008 msAATTsuse.de
- fixed USB stick identification code

Fri May 30 14:00:00 2008 msAATTsuse.de
- make kiwi build on all archs. This does _not_ mean it
has full functionality on other archs than ix86 and x86_64
Support for other archs is still work in progress !
- fixed find command in baseSetupPlainTextGITRepository
- create generic bootloader functions which calls specific
bootloader code according to the architecture. At the moment
only x
*86 and x86_64 have code for it
- fixed grub title setup if multiple kernels are installed

Thu May 29 14:00:00 2008 msAATTsuse.de
- make NFSROOT work together with UNIONFS_CONFIG. The read-only
device in the UNIONFS_CONFIG setup will be replaced by the
nfs mount options. According to this the follwing UNIONFS_CONFIG
setup would be sufficient: UNIONFS_CONFIG=/dev/ram1,nfs,aufs
- if NFSROOT is used in combination with UNIONFS_CONFIG or
COMBINED_IMAGE mount the remote root tree read-only

Thu May 29 14:00:00 2008 msAATTsuse.de
- better NFSROOT fix which fixes kiwiMount to work
when kiwiMount is set. This is required in case of a
non standard mount operation which also makes sense
for root over NFS (example COMBINED_IMAGE over nfs)
- update documentation:

* added a chapter how to build appliances with kiwi

Wed May 28 14:00:00 2008 msAATTsuse.de
- don\'t call kiwiMount function if NFSROOT is used

Wed May 28 14:00:00 2008 msAATTsuse.de
- fixed blocks/blocksize value used if the remote image is
compressed. Normally this information was created from the
uncompressed image but if the download happens on a compressed
file the values should also be available for this file.
Detailed information can be found here: (bnc #387228)
- fixed NFSROOT mount. NFS mount will fail if the -t auto mount
option is set. The fix makes sure FSTYPE=nfs is set before
mounting.

Fri May 23 14:00:00 2008 msAATTsuse.de
- added sense code checking for CD/DVD drives (bnc #390934)
The required driveready application is part of the kiwi-tools
packages. Therefore this fix applies to >= suse-11.0. For older
versions the wait counter has been increased.
- fixed SaT solvable creation (bnc #393495)

Fri May 23 14:00:00 2008 msAATTsuse.de
- added baseStripUnusedLibs functions to reduce initrd size
- removed unused network modules from vmxboot and oemboot
- removed support for reiserfs starting from suse-10.3 vmx/oemboot
- added oem-recovery element to support recovery of a damaged
root tree. This is still work in progress

Wed May 21 14:00:00 2008 msAATTsuse.de
- added id attribute. The optional attribute id allows to
set an identification number which appears as file /etc/ImageID
within the image

Wed May 21 14:00:00 2008 msAATTsuse.de
- added optional kiwirevision attribute. The optional attribute
kiwirevision allows to specify a kiwi SVN revision number which is
known to build a working image from this description. If the kiwi
SVN revision is less than the specified value the
process will exit.

Tue May 20 14:00:00 2008 msAATTsuse.de
- remove temporary .buildenv file after prepare (bnc #392054)
- fixed xenconfig creation, use kernel link file instead
of a glob match to setup the kernel=... variable

Mon May 19 14:00:00 2008 msAATTsuse.de
- don\'t remove /var/lib required for dhcp info (bnc #391317)
- added support for OEM settings in system image (bnc #390652)

yes|no
yes|no
MB
MB
text


Fri May 16 14:00:00 2008 msAATTsuse.de
- create ext3 read/write partition in usb stick workflow
- allow oemboot to set a custom title OEM_BOOT_TITLE (bnc #390652)
- allow oemboot to prevent creating a swap partition with
OEM_WITHOUTSWAP=1 (bnc #390652)

Fri May 16 14:00:00 2008 msAATTsuse.de
- allow xenpae kernel to be used on ix86 systems (bnc #390809)
- allow group/user ID\'s to be set in section (bnc #384330)
- allow 32bit and 64bit VMware guestOS setup (bnc #390889)

Thu May 15 14:00:00 2008 msAATTsuse.de
- replace db43 with rpmdb from rpm-devel (bnc #390832)
- changed back to lsilogic, dont\'t ask :-)

Thu May 15 14:00:00 2008 msAATTsuse.de
- call mke2fs with -I 128 (bnc #358483)

Thu May 15 14:00:00 2008 msAATTsuse.de
- don\'t call pattern solver twice
- fixed virtual CD device setup for VMware
- fixed initrd and kernel setup in xenconfig
- update documentation:

* added information about kiwiserver and
kiwiservertype used in PXE images

* added Xen chapter

Wed May 14 14:00:00 2008 msAATTsuse.de
- fixed import of loader/branding files (bnc #386674)
- fixed VMware SCSI setup, use buslogic driver
- don\'t clear the screen when calling linuxrc
- don\'t include unneeded /image data into the boot images
- fixed local grub setup for vmxboot with UNIONFS_CONFIG
- allow empty type=image packages
- added patch by Steffen Winterfeldt which
uses gfxboot directly to setup livecd=1

Tue May 13 14:00:00 2008 msAATTsuse.de
- make sure the source path doesn\'t contain spaces or
tabs at the beginning and/or at the end

Fri May 9 14:00:00 2008 msAATTsuse.de
- fixed grub boot sector check for --bootstick workflow
- removed /boot partition from --bootstick workflow

Thu May 8 14:00:00 2008 msAATTsuse.de
- added support for file:// semantic in config.xml
- fixed scsi fileName setup in VMware .vmx creation
- update documentation

* added new system design documentation (cookbook)

* added testsuite schema documentation

* update kiwi schema documentation

* update kiwi quickstart documentation

Tue May 6 14:00:00 2008 msAATTsuse.de
- fixed oemboot repartition check (bnc #386593)

Mon May 5 14:00:00 2008 msAATTsuse.de
- lib64 fix for old-style link system for iso live systems
- fixed kernel driver name rd.ko -> brd.ko for suse 11.0
- fixed version number of suse-live-iso example
- fixed importBranding function

Tue Apr 29 14:00:00 2008 msAATTsuse.de
- added support for creating Amazon EC2 images (bnc #367138)
- fixed name resolution in upgrade and testing mode
- fixed \"--bootvm-disksize\" option

Mon Apr 28 14:00:00 2008 msAATTsuse.de
- added image identification for USB sticks (bnc #383746)

Mon Apr 28 14:00:00 2008 msAATTsuse.de
- fixed build of solver plugin, sat api has changed
- moved cracklib-dict-small from image to bootstrap

Sun Apr 27 14:00:00 2008 cooloAATTsuse.de
- fix build with new satsolver

Thu Apr 24 14:00:00 2008 msAATTsuse.de
- fixed oemboot repartition check isFSTypeReadOnly
- make sure cromfs tools stay in initrd, fixed fuse based
cromfs mount. It\'s not allowed to use a loop device here
- fixed build of satsolver binding and requirements
- changed bigsmp -> pae for SUSE 11.0 boot descriptions
- added cracklib-dict-small to SUSE 11.0 boot image descriptions
this prevents the -full package to become installed
- added empty $root/.buildenv to prevent problems when building
images within an autobuild chroot environment

Thu Apr 24 14:00:00 2008 msAATTsuse.de
- removed redundant package repositories
- KIWIBoot constructor fix to setup vmmbyte correctly
- KIWIBoot constructor fix to recognizes raw split images correctly
- added kiwi-instsource sub-package for installation source
creation. This code is maintained by jcbornAATTnovell.com

Wed Apr 23 14:00:00 2008 msAATTsuse.de
- don\'t create filesystem if read-write image exist
- fixed kernelList call in oemboot/suse-preinit

Wed Apr 23 14:00:00 2008 msAATTsuse.de
- added inst-source patch by Jan Bornschlegel
- removed use of single /boot partition on virtual disk
based images. Patch by James Willcox

Tue Apr 22 14:00:00 2008 msAATTsuse.de
- added support for creating VMware scsi disks (bnc #380065)
- added support for creating cromfs images (bnc #379027)
- added version format check (bnc #380750)

Mon Apr 21 14:00:00 2008 msAATTsuse.de
- fixed creation of install CD/DVD (bnc #381953)
- fixed vmmbyte value for split image (bnc #381953)
- fixed bad boot sector check (bnc #382165)

Mon Apr 21 14:00:00 2008 msAATTsuse.de
- fixed use of CD root script and tarball, don\'t let them to
be part of the resulting image file (bnc #381247)
- added libxslt requirement for use of xsltproc (bnc #381355)
- fixed gfxboot setup for openSUSE 11.0 (bnc #381152)
- added KIWITest patches from Pavel Sladek

* scripts are now made executable before they are run

* requirements can be both internal or external (applies rpm test too)

* also corrected some bad behaviour when pathname
contained spaces (bnc #381421)

Fri Apr 18 14:00:00 2008 msAATTsuse.de
- fixed initial environment setup (bnc #381232)
- changed gfxboot theme name from SuSE to openSUSE (bnc #381152)

Thu Apr 17 14:00:00 2008 msAATTsuse.de
- fixed missing %ForeignRepo information used for rebuilding
the .profile environment. Hash is needed in KIWIXML object
- display only an excerpt of the screen log information
in case of an error. Don\'t store the duplicate error
information in the log file

Wed Apr 16 14:00:00 2008 msAATTsuse.de
- fixed unused space in repartition code (bnc #380063)

Tue Apr 15 14:00:00 2008 msAATTsuse.de
- added grub information into logfile, check grub status
- fixed VMware configuration setup:

* don\'t add image path to fileName variable

* fixed network setup use vmxnet driver

* added raw cdrom setup on ide controller

* make HWversion a config.xml attribute

* removed floppy controller

* make guestOS a config.xml attribute

* change to soft power options
- fixed Xen configuration setup:

* don\'t add image path to file: variable

* fixed root setup pointing to the partition not the disk
- fixed xen storage device detection if no disk but only
a partition device is present
- fixed source repo setup for the testsuite if the config.xml
includes the this:// repository source path
- added check for installed packages in kiwi testsuite
changed testing attribute to testsuite
- removed xsd documentation as kiwi uses relaxNG schema
definitions. maintain kiwi.rng.html for the future
- added LSB check by Pavel Nemec

Tue Apr 15 14:00:00 2008 cooloAATTsuse.de
- adapt to some package renames in 11.0

Fri Apr 11 14:00:00 2008 msAATTsuse.de
- fixed pattern quoting for required patterns
- added testsuite readme by Pavel Nemec
- fixed prebuilt image build by removing the SLED prebuild
the source has changed and SLES prebuilds are more important
- added baseSetupPlainTextGITRepository (bnc #379029)
- netboot: fixed typo fillPartition -> sfdiskFillPartition (bnc #379211)
- netboot: fixed root partition index when extended partition
is required (bnc #378884)

Thu Apr 10 14:00:00 2008 msAATTsuse.de
- fixed USB stick detection for suse 11.0 kernel (bnc #358483)
- fixed grub setup for oemboot if no swap partition exists

Tue Apr 8 14:00:00 2008 msAATTsuse.de
- fixed netboot download of files if compressed (.gz) image
name is set in config. (bnc #378321)
- hide smart package cache before building the logical extend
and move it back afterwards. This allows to keep the downloaded
packages in the prepared tree but not in the image itself
- added installPackages/removePackages methods in KIWIManager
allow packages type=testing section. Added new KIWITest module
and a new --testsuite mode. This allows you to run integrity
tests on your previosly created image root tree. If the test
required additional packages they can be added in a testing
section of the config.xml file. It is also planned to integrate
the LSB tests into this system (bnc #374477)
- added to config.xml files
for SUSE Linux 11.0

Tue Apr 8 14:00:00 2008 msAATTsuse.de
- fixed compiler warnings in pigz code
- if OEM_REBOOT is specified mount / ro before rebooting
- tell smart to keep the downloaded files after installation
- added schema and XML changes for instsource setup by
Jan-Christoph Bornschlegel

Tue Apr 8 14:00:00 2008 msAATTsuse.de
- fixed build

Mon Apr 7 14:00:00 2008 msAATTsuse.de
- fixed Nested quantifiers in regex
- oemboot: added support for OEM_REBOOT in config.oempartition
This allows to reboot the oem system after initial deployment.

* OEM_REBOOT=1
don\'t specify OEM_REBOOT if you want to boot directly into
the system (bnc #371744)

Sat Apr 5 14:00:00 2008 msAATTsuse.de
- added check for maximum blocksize for atftp protocol (bnc #372918)
- fixed maximum block count for atftp protocol (bnc #377034)

Fri Apr 4 14:00:00 2008 cooloAATTsuse.de
- libata needs dock.ko now - fixing live cd boot

Thu Apr 3 14:00:00 2008 cooloAATTsuse.de
- disabling the (failing) build of boot images

Wed Apr 2 14:00:00 2008 msAATTsuse.de
- really fixed update of .profile env (bnc #369936)

Fri Mar 28 13:00:00 2008 msAATTsuse.de
- improved usage information for base-root option (bnc #374370)
- fixed update of .profile env, needs profile name to work
correctly (bnc #369936)

Fri Mar 21 13:00:00 2008 msAATTsuse.de
- call dhcpcd -k after upload notification (bnc #372894)
- added inode number calculation for rootfs tarball (bnc #372648)

Sun Mar 16 13:00:00 2008 msAATTsuse.de
- fixed nbd port and swap setup (bnc #371554)
- fixed invalid option linkage, call init only one time (bnc #372017)
- make KIWICollect an on demand module, patch by jcborn
- added file check for rootfs tarball

Thu Mar 13 13:00:00 2008 msAATTsuse.de
- use startmode ifplugd for pxe netconfig (bnc #365170)
- allow ext2/3 and reiserfs for fsreadonly too
- update kiwi qickstart guide, changes by Thomas Schraitle
- update rng schema documentation
- update xsd schema documentation

Thu Mar 13 13:00:00 2008 msAATTsuse.de
- added loginfo data about USB stick partitions
- allow dhcpcd to log its output to the tty3 log console

Wed Mar 12 13:00:00 2008 msAATTsuse.de
- fixed update of .profile env according to type setup (bnc #369936)
- don\'t remove images.sh after first call (bnc #369957)

Wed Mar 12 13:00:00 2008 msAATTsuse.de
- removed smart from being part of the package list. The package
manager is added automatically according to the xml setup
- use --logfile terminal for prebuilding images
- fixed signal handling in case of interrupt

Wed Mar 12 13:00:00 2008 msAATTsuse.de
- v2.38
- the image script images.sh is not called in case of vmx images
the function call: setupLogicalExtend() was missing (bnc #369394)
- fixed image upgrade functionality and prevent the addon packages
to be passed into an eventually build boot image (bnc #369303)

Mon Mar 10 13:00:00 2008 msAATTsuse.de
- v2.37
- prevent split system from duplicating files/dirs (bnc #368661)
- fixed argument handling when mountSystem() function is called
- don\'t create a compressed rootfs tarball, it gets compressed
by the squashfs filesystem layer anyway and double compression
doesn\'t have any benefit

Fri Mar 7 13:00:00 2008 msAATTsuse.de
- v2.36
- fixed use of smart options rpm-root and deb-root (bnc #368120)
- allow
*.kiwi file as valid input beside config.xml (bnc #368129)

Wed Mar 5 13:00:00 2008 msAATTsuse.de
- v2.35
- added setupDefaultPXENetwork() function (bnc #365170)
- added isoboot profiles to allow default, smp and rt (bnc #367263)
- allow exceptions to be specified within split section (bnc #366510)
- fixed suseStripKernel if multiple kernels are installed (bnc #367263)
- fixed satsolver cache directory creation
- fixed validateTarSize ram check

Tue Mar 4 13:00:00 2008 msAATTsuse.de
- fixed build

Mon Mar 3 13:00:00 2008 msAATTsuse.de
- v2.34
- fixed packaging errors and rpmlint complains (bnc #365536)
- removed gzip program from beeing deleted in diskless profile
- added --bootusb option which works like --bootcd but for sticks
- added better image description examples

Fri Feb 29 13:00:00 2008 msAATTsuse.de
- v2.33
- added speedup patch for the deletion of rpm packages
- allow netboot linuxrc to evaluate the PXE BOOTIF information.
Along with this feature the setupNetwork and probeNetwork
function has been rewritten (bnc #365170)
- allow all oemboot modes (standard,combined and unified) to
work without re-partition of the disk if this is not possible
due to not enough disk space (bnc #365504)

Thu Feb 28 13:00:00 2008 msAATTsuse.de
- v2.32
- fixed packaging errors and rpmlint complains (bnc #365536)
- added validateTarSize() function to check if the rootfs archive
of a split system fits into the available tmpfs RAM space

Mon Feb 25 13:00:00 2008 msAATTsuse.de
- v2.31
- fixed kernelList function in KIWILinuxRC.sh and make
sure it is called when required (bnc #364806)
- fixed vmsize/vmmbyte calculation in KIWIBoot.pm
- yet another relative path fix for createImageSplit()
- added -o ro option to read-only mount in combined mount
- fixed COMBINED_IMAGE setup for setupInstallCD / Stick
- added xsl stylesheet to transform kiwi schema v1.4 to v2.0
switch to new 2.0 schema definition. The new schema changes
the packages type=boot into packages type=bootstrap and
requires the attributes fsreadwrite/fsreadonly for the split
image type instead of one filesystem attribute with comma
separated filesystem names as content
- added dbusdevice perl binding to send Lock message to hal
via dbus. This allows a perl program to prevent a storage
device from being mounted automatically by the hal daemon
The module is used when kiwi creates USB
sticks (bnc #355938)

Mon Feb 25 13:00:00 2008 msAATTsuse.de
- v2.30
- fixed relative path bug in createImageSplit()
- cleanup installation source setup created by kiwi
- fixed create password call, dm-crypt requires root permissions
- fixed shell cleanup code for password input mode
- added check for user/group commands (bnc #364494)

Wed Feb 20 13:00:00 2008 msAATTsuse.de
- v2.29
- fixed suseActivateDefaultServices function
- change non privileged actions to work without root permissions
- make sure the size value is used if a virtual disk image is
created from a given prepared root tree (bnc #363953)
- added support for config.oempartition in oemboot linuxrc.
This file allows to set the size of the swap partition,
system partition and can specify whether a /home partition should
be created or not. The following variables are allowed:

* OEM_SWAPSIZE=

* OEM_SYSTEMSIZE=

* OEM_WITHOUTHOME=1
don\'t specify OEM_WITHOUTHOME if you want a /home partition

Wed Feb 20 13:00:00 2008 msAATTsuse.de
- v2.28
- fixed loop mount if filesystem type is required by mount
- fixed virtual disk boot type detection, could be oem or vmx
- fixed image description md5 hash creation

Mon Feb 18 13:00:00 2008 msAATTsuse.de
- v2.27
- fixed creation of install sticks, wrong target
- fixed perl sat binding due to current version of libsatsolver

Fri Feb 15 13:00:00 2008 msAATTsuse.de
- v2.26
- fixed split image support on netboot if NBDROOT is used
- added waitForBlockDevice function and call it with NBD
- fixed invalid function call in boot stick creation (bnc #362239)

Thu Feb 14 13:00:00 2008 msAATTsuse.de
- v2.25
- allow boot attribute to be optional for split images
- changed ISO image type when flags=\"compressed\" is set. The new
style will use the split system by James Willcox and therefore
require a split section to define the read-write data

Wed Feb 13 13:00:00 2008 msAATTsuse.de
- v2.24
- fixed CD/DVD detection if multiple devices appear lately (bnc #359511)
- added main::checkFileSystem() method to get attributes of a fs
- fixed missing md5sum creation for install USB Stick image
- removed cramfs support because of its size limit. It doesn\'t apply
very well as compressed filesystem for system images.

Mon Feb 11 13:00:00 2008 msAATTsuse.de
- v2.23
- fixed module probing code due to hwinfo changes (bnc #359788)
- added interactive creation of destination directory (bnc #360487)
- make split image type to create the specified boot image (bnc #359124)

Sun Feb 10 13:00:00 2008 msAATTsuse.de
- v2.22
- added bootprofiles xen, smp and default to all boot image
descriptions except xenboot which has no alternative and has to
use the xen kernel. Additionally removed all -smp boot descriptions
as they are now handled with a bootprofile=\"smp\" attribute

Thu Feb 7 13:00:00 2008 msAATTsuse.de
- v2.21
- added tar program to be available in boot images
- fixed /proc/cmdline processing
- changed rootfs tarbal to use gzip instead of bzip2. We don\'t
have bzip2 in the boot images and the RAM part shouldn\'t be
that big that we require the small compression improvement here.
- cleaned up mountSystem function, use sub functions to
be called according to the different root mount methods
- add ramdisk module (rd) to netboot and load the module (bnc #310001)
- added support for split images in vmx/oem and usbboot (bnc #359124)
- increase CD/DVD drive test max probe count (bnc #356571)
- create very first smart cache inside the chroot (bnc #359449)
- fixed CD/DVD detection (bnc #359511)

Wed Feb 6 13:00:00 2008 msAATTsuse.de
- v2.20
- fixed RNG schema to handle split information correctly
- adapt suseGFXBoot function due to changes in suse-11.0
- fixed grub setup in KIWIBoot.pm if the used kernel is a Xen kernel
- added better disk detection for oemboot installation mode. We also
present the user a list of disk devices found and a selection must
be done at that point

Sat Feb 2 13:00:00 2008 msAATTsuse.de
- v2.19
- fixed missing device nodes in chroot system. When in the
second stage of the prepare step smart and zypper may require
access to the /dev device nodes.

Fri Feb 1 13:00:00 2008 msAATTsuse.de
- v2.18
- fixed oemboot boot image descriptions for SLE10 (#355963)
- added ISO boot catalog relocation function. It\'s important that
the boot catalog is in one of the first sectors. Unfortunately
mkisofs places it somewhere which may lead to boot problems on
some (not all) hardware. The relocation code will move the boot
catalog to the first possible sector
- added post partition size check for virtual disk images. Due to
alignment effects a partition may be smaller than the image it should
store. The added size check in KIWIBoot.pm repeats the partition
setup until the image fits in

Thu Jan 31 13:00:00 2008 msAATTsuse.de
- v2.17
- prevent resizing and checking of the root filesystem in case
of a vmx image type. These adaptions are now made in KIWIBoot.pm
- fixed URL problems if special characters are used. The bash
we use to add the channels evaluates the data which it shouldn\'t do
- add smart channel information to log file

Wed Jan 30 13:00:00 2008 msAATTsuse.de
- v2.16
- don\'t remove file utility from diskless netboot profile

Sun Jan 27 13:00:00 2008 msAATTsuse.de
- v2.15
- fixed cleanup function call when iso:// type is used (#356928)
- fixed git installed check and ignore list in KIWIConfig.sh
- change XML schema to allow user defined order of elements
- make /var/log/boot.kiwi available in system image
- fixed oemboot for compressed images on small disks

Thu Jan 24 13:00:00 2008 msAATTsuse.de
- v2.14
- fixed usb hub detection (#348362)
- umount USB stick partitions before deployment (#355938)
- added mkisofs requirement for kiwi-desc-isoboot package

Mon Jan 21 13:00:00 2008 msAATTsuse.de
- v2.13
- fixed branding data which wasn\'t copied completely (#354634)
- added root tree consistency check for all types (#355715)
- fixed netboot fetchfile to allow compression on all protocols
- added ensconce package manager support to kiwi.
- added kiwi quickstart guide

Fri Jan 18 13:00:00 2008 msAATTsuse.de
- v2.12
- added ability to download images over ftp/http/https to netboot
linuxrc. Requires curl. The \'kiwitftp\' kernel param is renamed
to \'kiwiserver\'. Set the \'kiwiservertype\' kernel param to one of
\'tftp\', \'ftp\', \'http\', or \'https\' to download using the
appropriate method. Patch by James Willcox

Mon Jan 14 13:00:00 2008 msAATTsuse.de
- v2.11
- fixed storage device detection for SLES, related to (#250241)
- fixed udevd setup and prevent udev from load modules which
it shouldn\'t load, removing 80-drivers.rules while booting (#354278)
- fixed KIWILinuxRC.sh probedevices function (#354278)
- added support for execution logging (#335573)
- fixed config-yast-firstboot.xml service setup
- fixed KIWILinuxRC.sh::importFile if \\\" are used (#353601)
- fixed KIWILog.pm: Don\'t create a bogus terminal file (#353610)
- fixed KIWILog.pm: Don\'t open huge amounts of redundant file
descriptors (#353610)
- added option --prechroot-call. If specified within --prepare
this option allows you to name a program which is called before
the switch into the chroot system happens and the second phase of
the prepare call starts.
- moved depmod call to suseStripKernel function

Fri Jan 11 13:00:00 2008 msAATTsuse.de
- v2.10
- fixed ZYPP_MOD_ALIAS setup
- added kiwi config file manual pages:
KIWI::config.sh.1
KIWI::images.sh.1

Wed Jan 9 13:00:00 2008 msAATTsuse.de
- v2.09
- added simple html schema documentation
- added missing forcearch attribute to instsource

Sun Dec 30 13:00:00 2007 msAATTsuse.de
- v2.08
- don\'t turn patterns into a package list if zypper is used.
request pattern directly with zypper in this case (#350706)
- fixed netboot bootsplash setup, glibc-locale was missing
when suseGFXBoot was called. this was necessary for 10.3 and 11.0
- cosmetic change: fixed error messages when stripping down the initrd
- added parport and lp kernel modules to boot image descriptions
- fixed locale setup and add boot default language if locale is
specified in system image description
- added function getInstSourceSatSolvable to KIWIXML.pm
This function will return an uncompressed sat solvable record
for the given repository list. If it\'s required to create
this solvable because it doesn\'t exist on the repository
the satsolver toolkit is used and therefore required in
order to allow this function to work correctly (#348734)
- added KIWISatSolver module and use it if libsatsolver is
available (#348734)

Fri Dec 21 13:00:00 2007 msAATTsuse.de
- v2.07
- fixed extractKernel call checks (#350263)

Thu Dec 20 13:00:00 2007 msAATTsuse.de
- v2.06
- added common suseStripKernel function and fix version check (#349829)
- use suseStripKernel in all boot images and remove config/kernel-
*
package scripts. Related to (#349829)

Wed Dec 19 13:00:00 2007 msAATTsuse.de
- v2.05
- fixed package check when zypper is used (#348031)
- fixed size of boot images when zypper is used (#348031)
- make isoboot linuxrc to be more verbose (#349764)
- added product information when zypper is used. This can
be done by a function named suseSetupProductInformation()
The function must be called in config.sh (#348029)
- fixed missing includeKernelParameters() calls (#349781)
- fixed permission setup in Makefile

Wed Dec 12 13:00:00 2007 msAATTsuse.de
- v2.04
- added URL quoting according to RFC 2396
- added KIWIUtil.pm module used by Jan-Christoph Bornschlegel
- fixed swap file setup if filesystem type is unknown (#348623)
- fixed umount of iso loop mounted paths (#348722)
- fixed searchSwapSpace / searchDiskSpace function to return
after first match (#349123)
- moved schema description from xsd to RelaxNG (#348084)
- resize ramdisk filesystem to get full access (#348316)
- added first version of SaT module (#348734)
- added /usr/share/doc/packages/kiwi/ChangeLog (#349492)
- added cleanup code for temporary resolv.conf (#349491)
- added baseSetupBusyBox function which allows you to replace
the mentioned programs in busybox.links by a link to the
busybox binary. This function should be used in boot images
only and can reduce the size of your boot image. Using this
function requires the package busybox to be installed as
part of the boot image config.xml (#349181)

Tue Dec 11 13:00:00 2007 msAATTsuse.de
- v2.03
- fixed kernel package name in isoboot/suse-SLES10-SP1-smp (#346753)
- added repository type validation to KIWIScheme.xsd (#347479)
- fixed filelog() call when logging takes place into a file (#348035)
- fixed isoboot config.xml which have 2 rpm declarations
wrapped in one line. Patch by Guy Lunardi

Fri Dec 7 13:00:00 2007 msAATTsuse.de
- v2.02
- fixed local grub setup and sysconfig/kernel (#346824)
- fixed home partition handling in oemboot linuxrc (#346644)
- added waitForStorageDevice function which was implemented as
inline code in the netboot linuxrc. The function is used in
the netboot and oemboot images to check for disk/partition
devices (#346644)
- added netboot config.xml patch to reduce initrd size for
diskless systems. Patch by Jigish Gohil added
to suse-10.3 and suse-11.0 netboot descriptions (#347182)
- remove /usr/share/locale
* in KIWiConfig.sh::suseStripInitrd
instead of only /usr/share/locale

Thu Dec 6 13:00:00 2007 msAATTsuse.de
- v2.01
- fixed size check and decompression for gz images (#345896)
- call hash -r at the end of cleanInitrd (#346356)
- use killproc to stop udevd (#332678)

Fri Nov 30 13:00:00 2007 msAATTsuse.de
- v2.00
- fixed netboot atftp download, patch by
jacob berkman . Thanks Jacob (#345859)
- fixed pattern search if pattern name contains regular
expression information which needs to be quoted
- fixed cleanup code and log server session. Added a new
command \'exit\' for log server sessions
- fixed repotype detection for opensuse:// url type
- changed config-yast.xml to config-yast-autoyast.xml
- added support for config-yast-firstboot.xml based on the
yast2-firstboot mechanism
- update documentation according to the yast2 autoyast and
firstboot changes

Wed Nov 28 13:00:00 2007 msAATTsuse.de
- v1.99
- don\'t use /mnt as mount directory (#344589)
- reread partition table using blockdev (#340317)
- fixed cleanup code in KIWIBoot and objects of this class
- added pigz to kiwi-tools package and fixed pigz to allow
splash files which are compressed cpio archives
- start blogd for setting up /var/log/boot.msg file
- added two examples to /usr/share/doc/packages/kiwi/examples
the documentation will refer to this examples in the future
- fixed --bootstick and --bootvm options when uncompressed
boot images are used
- added kiwi manual page

Wed Nov 28 13:00:00 2007 msAATTsuse.de
- v1.98
- fixed console redirect while booting into the system
- fixed oemboot descriptions, atftp is not required (#344546)

Wed Nov 28 13:00:00 2007 msAATTsuse.de
- fixed build, tested with mbuild

Tue Nov 27 13:00:00 2007 msAATTsuse.de
- v1.97
- fixed package query call for older smart versions
- performance fix: prevent gzip from being called too often

Mon Nov 26 13:00:00 2007 msAATTsuse.de
- v1.96
- fixed block count used with sparse files (#343845)
- fixed md5sum check, use head not tail (#341240)
- added better error checking for setupSplashForGrub()
- udevtrigger and udevsettle are links to udevadm
- added device wait check for storage device to appear
- make gzip a configurable command, default is gzip -9
- fixed parted partition setup
- fixed package query call

Fri Nov 23 13:00:00 2007 msAATTsuse.de
- v1.95
- fixed oemboot repartition code for small disks
- fixed oemboot fstab setup to check whether there is already
a non empty /home directory which would become covered by
the mount of the extra home partition. If such a /home directory
exists we will prevent the partition from being mounted
automatically
- patch by Nat Friedman which adds an argument
to kiwi, --ignore-repos, which causes Kiwi to Ignore all repositories
specified so-far, in XML or otherwise. This option should be used in
conjunction with subsequent calls to --add-repo to specify repositories
at the command-line that override previous specifications.
- patch by Nat Friedman which makes Kiwi\'s log files
include seconds, which is very useful when you\'re optimizing.

Wed Nov 21 13:00:00 2007 msAATTsuse.de
- v1.94
- added option --createhash to create a description md5sum
- added md5 based integrity check for image descriptions. As
soon as the file .checksum.md5 exists in the image directory
it will be used to check the md5 hash for all files listed in
the md5 file. Kiwi creates by default checksums for all boot
images

Tue Nov 20 13:00:00 2007 msAATTsuse.de
- v1.93
- added support for iso:///path/to/iso/file (#338090)
- added update of user/group permissions (#342219)
- added closeKernelConsole function and rename existing function
to openKernelConsole which is more what it does
- fixed initial creation of /dev/tty1-4 devices

Tue Nov 20 13:00:00 2007 msAATTsuse.de
- v1.92
- fixed cleanup code, make sure umount happens when not busy

Mon Nov 19 13:00:00 2007 msAATTsuse.de
- v1.91
- fixed removal of base-system path
- fixed cache dir name for smart to be a unique name
- fixed partition table setup for USB sticks. The problem was
that the sparse file created for the boot partition add 1MB
more space than calculated before (#342604)

Sun Nov 18 13:00:00 2007 msAATTsuse.de
- use default block size for mksquashfs call. This also means
you can\'t use squashfs compressed images in ramdisk devices
without the following patch:
Index: modules/KIWIImage.pm
--- modules/KIWIImage.pm (revision 823)
+++ modules/KIWIImage.pm (working copy)
AATTAATT -2291,7 +2291,7 AATTAATT
$tree = $imageTree;
}
unlink (\"$imageDest/$name\");
- my $data = qx (/usr/bin/mksquashfs $tree $imageDest/$name 2>&1);
+ my $data = qx (/usr/bin/mksquashfs $tree $imageDest/$name -b 4096 2>&1);
my $code = $? >> 8;
if ($code != 0) {
$kiwi -> failed ();
As it is more important to have best compression results I reverted
the blocksize option for mksquashfs. This is related to bug (#341909)

Fri Nov 16 13:00:00 2007 msAATTsuse.de
- fixed call of mksquashfs (#342263)

Fri Nov 16 13:00:00 2007 msAATTsuse.de
- v1.90
- all filesystems created by kiwi use blocksize 4096 (#341909)
- added ramdisk_blocksize=4096 as kernel append parameter to the
sample pxelinux.cfg/default file provided with the kiwi-pxeboot
package (#341909)
- added rd_blocksize=4096 to modprobe.conf.local to isoboot and
netboot boot images up to suse-10.3 (#341909)

Thu Nov 15 13:00:00 2007 msAATTsuse.de
- v1.89
- fixed kernel scripts to take care for the weak-updates dir (#341876)
- added boot logging on /dev/tty3 for all boot images (#341924)
- added base root mode recycle to allow an existing base root path
to be used directly. This of course will change the base root path
- changed cleanup order, kill forked processes first (#341635)
- fixed resume partition setup (#341310)

Wed Nov 14 13:00:00 2007 msAATTsuse.de
- v1.88
- enhanced base-root support to be able to choose two modes. The mode
can be set by --base-root-mode and allows the values \"union\" or \"copy\".
The union type is the already existing overlay support by mounting a
readonly base tree together with a new image tree. The second and new
mode is the copy mode which tar/untar the base root tree instead
of using an overlay mount via aufs. The default mode is: copy

Wed Nov 14 13:00:00 2007 msAATTsuse.de
- v1.87
- fixed oemboot initrd to be able to reboot the system (#341310)

Mon Nov 12 13:00:00 2007 msAATTsuse.de
- v1.87
- added warning message to check the architecture / repository
combination if a pattern match results in an empty list (#340263)
- changed oemboot initrd to reboot the system (#341310)
- added faster md5sum check. A fixed blocksize is used. Patch
by Peter Stark (#341240)
- fixed removal of cache dir in case of interrupt
- fixed shell wait call to provide the correct exit code of the
process which wait is waiting for
- better local and remote pattern file check
- better USB stick detection, wait until device is ready
remove static sleep

Fri Nov 9 13:00:00 2007 msAATTsuse.de
- v1.86
- fixed date string in usage information (#340224)
- cleanup initrd stuff in suseStripInitrd, cleanup KIWIBoot code
better error checking when calling multiple commands
- remove 1400x1050 and 1600x1200 from suseGFXBoot function
- fixed location detection of System.map files
- fixed usbboot boot images for SLE (#340467)

Wed Nov 7 13:00:00 2007 msAATTsuse.de
- v1.85
- dont add /dev/shm as tmpfs to fstab. This fixes the network
setup done by /etc/init.d/network
- added kiwi-tools package to SUSE 11.0 boot descriptions
- fixed opensuse:// URL type. Fixed by Jan
- fixed splitPathHTTP which fails if the base URL doesn\'t return a
dir listing but something different. Fixed by Jan too
- check result of copying root/ data to image (#339814)
- added read-only check for mounting the repositories. If a
repository path has no write permissions it doesn\'t make sense to
use aufs/unionfs to implement a read-only mount. Use bind mount
directly in that situation (#339503)
- use setctsid to call a systemException shell. Fix call of
boot shell on /dev/tty2
- aufs back again in SUSE 11.0 :-)
- allow use of perl debugger

Tue Nov 6 13:00:00 2007 msAATTsuse.de
- v1.84
- fixed killing dhcpcd if no system update is required (#339460)
- fixed fstab setup, overwritten due to wrong IO redirection (#339458)
- added /etc/ImagePackages file on initial deployment
- added hwinfo to be part of the usbboot boot images
- added baseSetupInPlaceGITRepository() function
- added integrity check for --force-new-root option

Mon Nov 5 13:00:00 2007 msAATTsuse.de
- v1.83
- cleaned KIWILinuxRC.sh code according to shell syntax
- added startShell and killShell function to KIWILinuxRC.sh (#335678)
- added netboot/suse-11.0 target and fix diskless profile (#332595)
- fixed use of uninitialized value in KIWIURL.pm:87 (#339117)
- added next release targets as copy of 10.3

Mon Nov 5 13:00:00 2007 msAATTsuse.de
- v1.82
- optional split section added by James Willcox
The following applies to the new split image type:
- --snip---
In the new split image type, files/directories can exist in one
of three places:
1) read-only disk area
2) read-write disk area
3) tmpfs
By default, every directory is in tmpfs and every file is a symbolic
link to the read-only location. The patch I have attached allows you to
specify which files/directories should be in one of the two other
locations. For instance, take the following:









This would copy /etc/fstab and /etc/mtab to tmpfs and put /boot in the
read-write disk area. Note, however, that none of the files

* within
* /boot are affected. They remain symbolic links to the real
files in the read-only area. The main advantage to putting just a
directory in the read-write area is that any new files created there are
stored on the disk instead of tmpfs. Of course files can be specified
here too, and wildcards are allowed. Example:







*\"/>


This time, all files and directories within /boot are copied to the
read-write disk image as well.
The \'split\' information is optional. When left out, no read-write disk
image is produced since everything is either read-only or on tmpfs in
that case.
- --snap---

Fri Nov 2 13:00:00 2007 msAATTsuse.de
- v1.81
- fixed packagemanager adaption if system image and boot image
description doesn\'t use the same packagemanager (#338378)
- added option --bootcd which allows to create a bootable CD
based on the given initrd file (#338467)
- fixed oemboot missing md5 file problem
- changed arch call to uname -m to prevent requirement on
util-linux package

Wed Oct 31 13:00:00 2007 msAATTsuse.de
- v1.80
- added kiwi-tools package (startshell), related to (#335678)

Mon Oct 29 13:00:00 2007 msAATTsuse.de
- v1.79
- added KDE profile to createLiveCD script
- fixed attribute flags check, check for empty value too
- added support for kiwibrokenmodule kernel parameter. A list
of comma seperated modules which should _not_ become loaded
even if they are selected to get loaded (#337545)
- added support for kiwinoswapsearch kernel parameter. If set
the isoboot (live systems) boot image will not setup a swap
space or swap file (#337533)
- added cleanLoop function for KIWIBoot objects. clean loop
and device mapper setup in case of an interrupt signal
- fixed interrupt signal handling (#337009)
- added option --prebuiltbootimage which allows to specify another
than the default search path for the pre-built boot images
- added option --listxmlinfo which prints information from
config.xml. Right now this function is used for internal reasons
only but can be enhanced to print more useful information
- fixed use of --logfile option
- using new split image system by James Willcox
Thanks James, great job !
- --snip---
The split image type has changed:
Given a read-only image, a tarball of directories and symbolic
links is created which mirrors the structure of the read-only image.
The symbolic link for each file points to the location where the
read-only image will be mounted. For instance, /usr/lib/libfoo.so
will be a link to /read-only/usr/lib/libfoo.so. After creating this
tarball, it is placed in the read-only image at /rootfs.tar.bz2.
At mount time, this tarball is unpacked into a tmpfs and used as the
root filesystem. The advantage of this approach over a typical \'split\'
filesystem is that new files can be created in every directory
instead of just a few pre-defined toplevel trees.
This patch also goes one level further and separates some directories
(/etc, /root, /home, /var/lib/rpm) to be put onto a separate read-write
image. The advantage of this is that when deployed onto a diskful
machine, any files created in those trees will be stored on the disk
instead of tmpfs. We may want to have a way for images to specify those
paths directly instead of having a hard-coded list.
Secondly, the patch adds a hook mechanism to the netboot script. With
this, custom images can get their own script code executed at various
points. This is great if, for instance, you need to conditionally load
kernel modules with specific parameters. It can be used by simply
creating a file like /hooks/.sh with the custom bits inside.
These scripts are sourced from the init script so they have access to
the same variables/functions.
- --snap---

Sat Oct 27 14:00:00 2007 msAATTsuse.de
- v1.78
- activated shell set -x mode (#335573)
- fixed createLiveCD script due to renaming of image (#337391
- use Recommends flag for packagemanager (#300981)
- disable use of zypper --catalog option it doesn\'t exist in newer
versions. zypper v0.9.0-7 (#335116)
- fixed users and group matching (#336884)
- fixed integration of template files while starting to create
a new root system (#335268)

Thu Oct 25 14:00:00 2007 msAATTsuse.de
- v1.77
- fixed exit code of kiwi call. Some module destructors call
external processes which causes the exit code to be the value
of this process, which is apparently wrong. (#336734)
- added support for pre-built boot images. To enable the lookup
one had to specify the attribute checkprebuilt=\"true\" within the
type section(s). If specified the prebuilt boot image must reside
in /usr/share/kiwi/image/
*boot/
*-prebuilt/. The search is based
on the boot=\"...\" attribute given in the type section (#334475)
- moved call of config.sh at the end of all configurations
- moved in place repo code into extra function called
baseSetupInPlaceSVNRepository. This function can be called
on demand in config.sh with the directories the repo should
take control over as function arguments
- added creation of md5 file which was skipped due to performance
patches. In case kiwi directly writes the system image data onto
a device mapper partition the md5 file needs to be created
afterwards (#337096)
- use bs=32k for image installation in oemboot linuxrc. Patch
by Till Franke
- use bs=32k for usb and virtual disk dumps (#336822)
- prevent e2fsck from being called too often (#336889)
- code cleanup, added -w switch

Thu Oct 25 14:00:00 2007 msAATTsuse.de
- v1.76
- fixed ZYPP_MODALIAS_SYSFS setup for zypper install/update (#335116)

Wed Oct 24 14:00:00 2007 msAATTsuse.de
- v1.75
- kill udev before preinit starts (#332678)
- added failsafe entry to grub configuration (#334712)
- added failsafe entry to isolinux configuration (#334712)
- added resume=/dev/ to grub configuration (#335522)
- remove unneeded /image directory after deployment (#335517)
- fixed resetInstallationSource for zypper manager (#335134)
- remove config-cdroot.tgz and config-cdroot.sh from image (#334645)
- fixed interrupt signal handling for log process (#335588)
- added \"ZYPP_MODALIAS_SYSFS=/tmp\" for zypper install/update (#335116)
- use --auto-agree-with-licenses option for zypper in and outside
of the chroot environment (#335147)

Tue Oct 16 14:00:00 2007 msAATTsuse.de
- v1.74
- fixed cdrom detection, wait for usb devices to settle (#333498)
- make devices visible for udev by mount --move /dev /mnt/dev (#332678)
- don\'t remove udev from boot images, related to (#332678)
- added usb-uhci-hcd module for isoboot suse-10.3 (#334549)
- removed runme_at_boot from oemboot linuxrc

Fri Oct 12 14:00:00 2007 msAATTsuse.de
- v1.73
- added setLogHumanReadable() function to convert the kiwi log
file into something readable, concerning the \\r escape sequences
- fixed inplace kiwi calls to not overwrite the log file
- added bootprofiles for smp netboot boot descriptions
- load ramdisk module (rd) if required in isoboot linuxrc

Thu Oct 11 14:00:00 2007 msAATTsuse.de
- v1.72
- fixed udevStart function, added missing udev tools (#332678)
- removed devs package from all boot image descriptions
- added copyDevices function, bettern than moving it
- added optional kiwikernelmodule= parameter
- removed setupBootSplash function from initrd

Wed Oct 10 14:00:00 2007 msAATTsuse.de
- v1.71
- move initrd device nodes to system image to allow system
images without static devs

Wed Oct 10 14:00:00 2007 msAATTsuse.de
- v1.70
- fixed NBD support udev creates nbd not nb device nodes (#332493)
- fixed device probing bug, restore IFS before probing
- added option --log-port to specify the log server port
- use sparse files for image creation [speedup]
- copy system image directly for vmx types [speedup]

Tue Oct 9 14:00:00 2007 msAATTsuse.de
- v1.69
- create device nodes in shared memory segment which fixes
the nodes created in initrd from being removed while booting
into the system. This also fixes the splash problem (#332036)
- removed devs package from 10.3 boot images
- removed deb-root from being set for smart
- allow shell attribute to setup the login shell for a user
Patch by Nat Friedman
- There are some nice deployment options in config.mac, but nothing to set
these from config.xml. Specifically, I\'m talking about the
KIWI_BOOT_TIMEOUT, KIWI_KERNEL_OPTIONS, KIWI_KERNEL and KIWI_INITRD
settings. This patch adds the ability to set these from config.xml
Patch by James Willcox

Mon Oct 8 14:00:00 2007 msAATTsuse.de
- v1.68
- use hwinfo to load storage drivers in correct order (#299663)
- added framebuffer devices in initrd suse-preinit
- added udev start/stop to initrd linuxrc\'s, don\'t delete udev
for suse 10.2 / 10.3 boot descriptions
- added creation of /boot/grub/device.map used by mkinitrd
- use smart --data-dir instead of force-channels. This will setup
a clean data dir channel repo for smart used by kiwi only. The
standard channel list in /var/lib/smart remains untouched

Fri Oct 5 14:00:00 2007 msAATTsuse.de
- v1.67
- fixed jabber setup

Fri Oct 5 14:00:00 2007 msAATTsuse.de
- v1.66
- added ata drivers to isoboot boot image (#299663)
- create /etc/sysconfig/bootsplash which is used by the distro
initrd tool. Added function call to all linuxrc\'s

Thu Sep 27 14:00:00 2007 msAATTsuse.de
- v1.65
- fixed relative path problem of --installcd (#329842)
- added suseActivateDefaultServices function (#309801)
- added better CD detection based on hwinfo (#299663)
- added kiwidebug kernel option which turns every reboot
exception into a shell exception. related to (#299663)
- added option nocolor to prevent color output (#328298)
- make perl-Net-Jabber an option not a requirement
- created common functions for setting up grub and change all
suse-linuxrc / suse-preinit files accordingly
- opened log server for XML based milestone logs on default
port number 9000. One can change the port by setting
our $LogServerPort = ... in $HOME/.kiwirc. The server runs
as long as kiwi runs and accept a small set of commands.
Right now only the server is there but no commands exists.
This will follow the next days.
- added optional defaultbaseroot element to preferences section
- added optional baseroot attribute to type section
- update documentation concerning the new element/attribute
- added KIWISocket module for milestone server
- added image name to be displayed in the boot loader setup
- fixed TFTP server lookup
- added check for livecd_config in /proc/cmdline for isoboot
linuxrc to allow changing the image file name via kernel
option. Patch by Christoph Thiel
- Currently when KIWI writes out the image config file for netboot, it
sometimes gets the partition size wrong for partitions that are marked
to be just big enough for the image. Patched by
James Willcox
- added experimental callSUSEInitrdScripts to KIWILinuxRC.sh
The function is not called right now but should be in the
future to ensure a better pre-init environment for SUSE
based systems. This is related to missing udev support
and bootsplash problems during boot

Wed Sep 26 14:00:00 2007 msAATTsuse.de
- fixed stick creation for compressed images. Too many spare
space was added to the read-only image part. This was a waste
of space

Wed Sep 26 14:00:00 2007 msAATTsuse.de
- added harddisk boot for isoboot (#328509)
- load BusLogic module for vmxboot/oemboot systems (#327358)
- fixed pattern download by using the content file. On local
repo check by glob search if no content file exists (#328003)

Tue Sep 25 14:00:00 2007 msAATTsuse.de
- added more robust disk device detection for oemboot (#328327)
- changed relative path handling. Check if relative path exist
before using the default /usr/share/kiwi/image lookup (#328269)

Tue Sep 25 14:00:00 2007 msAATTsuse.de
- fixed ftp:// pattern requests (#328003)
- really fixed call of config-cdroot.sh if relative path is used
- added better error information for pattern downloads

Tue Sep 25 14:00:00 2007 msAATTsuse.de
- fixed build for x86_64
- fixed call of config-cdroot.sh if relative path is used

Tue Sep 25 14:00:00 2007 msAATTsuse.de
- fixed spec file architecture build requirements
- fixed missing copy call of config-cdroot.sh

Mon Sep 24 14:00:00 2007 msAATTsuse.de
- fixed documentation typos (#327668)
- added config-cdroot.sh to be called if existent. The script is called
with access to the image environment and within the CD root directory.
The call takes place outside of a chroot because the CD root has no
accessable root tree with bash or other programs available (#327799)
- added better failed message if loop mount has failed
- added posbios as allowed tool in initrd
- allow tool parameter to suseStripInitrd() function to
prevent the given tools from being deleted
- added experimental jabber client to kiwi, which can be
configured in $HOME/.kiwirc
my $JabberServer = \"server-name\"
my $JabberUserName = \"user-name\"
my $JabberPassword = \"password\"
my $JabberRessource = \"ressource-name\"
my $JabberComponent = \"component-name\"

Fri Sep 21 14:00:00 2007 msAATTsuse.de
- pass allong $AATT to init process (#327037)
- fixed remote download of pattern files (#327096)
- added updateMTAB function for all linuxrc\'s (#326386)

Thu Sep 20 14:00:00 2007 msAATTsuse.de
- fixed usage of basename and dirname by using File::Basename and
in scripts use /usr/bin/[basename|dirname] so a function can\'t
overwrite the use case here (#326758)

Thu Sep 20 14:00:00 2007 msAATTsuse.de
- fixed oemboot linuxrc for vmx raw boot (#309800)
- fixed repartition code in oemboot for small disks (#309800)

Wed Sep 19 14:00:00 2007 msAATTsuse.de
- added check for isolinux-config in suse-isolinux
- added checks for copy calls in KIWIImage.pm while creating
a live ISO image
- don\'t install grub if initrd and/or menu.lst can\'t be
created in case of an oemboot system
- fixed mount in oemboot if not unified system
- better failed message if system image is too small to hold
the boot image data required for virtual disk boot

Tue Sep 18 14:00:00 2007 msAATTsuse.de
- reread partition table after oemboot installation
- fixed repartition code for squasfs/aufs based system images
installed by oemboot
- fixed virtual disk size calculation if squashfs is used
- don\'t throw a reboot exception in mountSystem but return
with code 1 to allow caller to check the return value
- added support for $HOME/.kiwirc file. It\'s perl syntax and
allows to set the variables $BasePath and $System. By default
/usr/share/kiwi is used for $BasePath and /usr/share/kiwi/image
is used for $System (#308597)
- use correct passwd and group template file of the
distribution. image descriptions should _not_ provide
a passwd or group file within the image description root/
path anymore (#297610)

Tue Sep 18 14:00:00 2007 msAATTsuse.de
- fixed missing message file for vmx type
- added usage information for --add-profile option
- added baseGetProfilesUsed() function to get information
about the used profile

Mon Sep 17 14:00:00 2007 msAATTsuse.de
- missing mksquashfs is now handled as fatal error

Mon Sep 17 14:00:00 2007 msAATTsuse.de
- fixed suse-isolinux exit code

Mon Sep 17 14:00:00 2007 msAATTsuse.de
- added call of posbios if installed to obtain BIOS information
uploaded into the registry file while a new network client is
registered
- added kernelCheck for installed and active kernel in
netboot boot image, suse-linuxrc
- added image notification if a new image is installed on the
client via PXE in the netboot boot image, suse-linuxrc
- added support for base image usage. This means you can use
the contents of a given directory as the base image instead of
starting with a clean and empty directory. kiwi will use the
overlay technique with either aufs or unionfs to build the
target directory as combination of the base (--base-root) image
and a new image directory optionally specified with the --root
option. As result the image root directory will contain only a
part of the complete image which is the data not part of the
base image or the data which has been touched/copied. In
principal all copy-on-write actions within the combined filesystem
causes data to be written in the image root directory. base
image support works for the prepare and create steps of kiwi

Wed Sep 12 14:00:00 2007 msAATTsuse.de
- show the output of --list-profiles in a nicer format
- added installed OS version check for oemboot
- added revision information to kiwi --version
- added filesystem check for unified write extend. If first
mount failed, try to check filesystem, if next mount failed
re-create the write filesystem of the unified tree
- added support for unified virtual disk images to oemboot.
In this case the kiwi initrd will not be replaced by the
distribution default initrd
- added additional patternPackageType attribute which allows
to distinguish between pattern and package references of a
specified pattern. For example one can use only required
patterns with patternType=\"onlyRequired\" but want to use
all suggested packages of these required packages with
patternPackageType=\"plusSuggested\" (#309989)
- added support for USB install sticks.
- fixed USB stick search, check if device is active
- added CRNAME and IPADDR values to upload file
- added CDEject function to KIWILinuxRC and eject the install
CD when installation has finished

Mon Sep 10 14:00:00 2007 msAATTsuse.de
- v1.64
- changed KIWIPattern.pm to know about compressed patterns. With 10.3
the yast2 repositories provides compressed meta and pattern files
- changed oemboot repartition code to use the same default
partition names than netboot does. This means the partition
are as follows: root -> xda2 / swap -> xda1 / home -> xda3
- make use of the profile mode and added a default and a xen
profile into the netboot boot images. According to this the
xennetboot boot images can be removed and are replaced by the
new netboot boot image descriptions. To distinguish between
a netboot with default or Xen kernel a new attribute called
bootprofile has been implemented. By default the attribute will
have the value \"default\" but this can be overwritten with
another bootprofile attribute of a system image with \"pxe\"
image type. Instead of boot=xennetboot/suse-... write
boot=netboot/suse-... bootprofile=\"xen\"

Thu Sep 6 14:00:00 2007 msAATTsuse.de
- v1.63
- added splash support for usbboot boot images
- added usbboot boot image for SLED10 (#308187)
- added bootsplash support for netboot (#308233)
implement option --setup-grub-splash

Thu Sep 6 14:00:00 2007 msAATTsuse.de
- v1.62
- fixed changed location of squashfs module in 10.3 kernel
- added --auto-agree-with-licenses option for zypper
- include packagemanager adaption from system to boot image

Tue Sep 4 14:00:00 2007 msAATTsuse.de
- v1.61
- changed default NBD device to be /dev/nb0
- added support for NBD swap space if NBDROOT is used. Patch by
Jigish Gohil
- added oemboot description for suse-10.3
- implemented the previous system installer code from isoinstboot
into oemboot. The mechanism is based on a virtual disk image
created before. Using the kiwi call:
kiwi --bootcd --bootcd-system
will create an ISO image which serves as installation media.
Burned on a CD or DVD one can boot from it and the oemboot initrd
automatically will install the disk image on the disk. Please note
like before with isoinstboot all data on the disk will be lost.
The system will be rebooted automatically and the same oemboot initrd
takes care for the initial boot of the virtual disk system image.
The oemboot initrd will adapt the disk geometry to the real disk
and will boot into the system.
- added oemboot installcd documentation
- added patch by Cornelius Schumacher
which allows optional remove of root directory

Mon Sep 3 14:00:00 2007 msAATTsuse.de
- v1.60
- added support for section (#304765)
- removed isoinstboot description from repo, not valid anymore
- got a nice cover page by Frank Sundermeyer for
the documentation, thanks Frank

Mon Sep 3 14:00:00 2007 msAATTsuse.de
- v1.59
- update documentation
- fixed network block device default name: is now nbd0
- allow block device name to be specified in NBDROOT
- added patch by Jan which fixes
directory changes not happen in subshells

Tue Aug 28 14:00:00 2007 msAATTsuse.de
- v1.58
- moved documentation to openSUSE book on forge.novell.com
The book is work in progress as well as the kiwi chapter in
there. I started to update the documentation and set the
initial structure. There are some TODO entries which we are
working on
- added nfs-client package to be part of netboot/suse-10.3
fixed nfs mount for 10.3 mount.nfs was missing
- added partition code by Jan and
activate bootsplash for oemboot initrd
- added experimental support for network block device diskless
boot, NBDROOT support (#304760)
- fixed splash files detection check in setupSplashForGrub()
- removed squashfs-kmp-default from descriptions. The module ist part
of the standard kernel of openSUSE 10.3 now
- added optional CD root data. The description can contain
the file config-cdroot.tgz which is a gzip tar archive.
The archive will be unpacked as CD root data and can contain
license and/or README data (#299732)

Tue Aug 28 14:00:00 2007 msAATTsuse.de
- v1.57
- fixed build and smart channel setup

Fri Aug 24 14:00:00 2007 msAATTsuse.de
- v1.56
- fixed UNIONFS_CONFIG setup in KIWIImage.pm
- added checkExclusiveLock function (#304769)
- added defaultdestination/defaultroot attribute to optionally be
specified in config.xml section (#304775)
- added mandatory schemeversion attribute (v1.4)
- added splash screen for vmxboot boot images
- fixed zypper service name: Plaindir instead of plaindir
- added splash=silent and vga=0x317 to isoboot configurations
- disable build of prebuild boot images. I can\'t access the
repo via smart on either ftp or http
- added patch by Magnus Boman which
is preventing a few NFS boot required binaries from being deleted
- added patch by James Willcox which implements
profile support into kiwi\'s config.xml format

*
*
*
* description
*
*
*
*
It allows you to maintain one image description while
still allowing for some variation in the set of packages and drivers
that are included. For instance, a good use of profiles would be to
have a \'gnome\' and \'kde\' profile for a LiveCD. The patch adds two new
command line arguments to kiwi: --list-profiles and --add-profile.

* The first allows you to simply list the profiles available in a given
image. Each one has a name and description.

* The second option allows you to specify which profiles should be
included when preparing the image.
The other part of the patch modifies the config.xml and the code
which reads it. You can now use the following to create a set of
profiles in config.xml:





To mark a set of packages as belonging to a profile, simply annotate
the \'packages\' tag with the \'profiles\' attribute. For example,

...

If a given set of packages belongs to more than one profile, separate
them with a comma. Example:

...

If a \'packages\' tag has no \'profile\' attribute, it is assumed to be
present for all profiles. BTW, all of the above also goes for the
\'drivers\' tag too.

*
*
* end
*
*
*

Wed Aug 22 14:00:00 2007 msAATTsuse.de
- v1.55
- fixed /tmp security problems (#302552)
- don\'t remove dmesg application from initrd

Mon Aug 20 14:00:00 2007 msAATTsuse.de
- v1.54
- use gzip --force in KIWIImage to compress data
- added configuration of timezone/locale and keytable
- activate splash screen for isoboot images, live media (#293742)
- added zypper type conversion from rpm-dir to plaindir (#301839)
- implement splash support if installed (#293742)
- added loop detection for image inheritance (#296397)

Mon Aug 20 14:00:00 2007 msAATTsuse.de
- v1.53
- make zypper work with kiwi (#298731,#300133)

Tue Aug 14 14:00:00 2007 msAATTsuse.de
- v1.52
- added README.prebuild for the kiwi-pxeboot-prebuild package
- fixed searchSwapSpace and searchDiskSpace to look for a
maximum number of 15 partitions per disk (Linux specific)

Tue Aug 7 14:00:00 2007 msAATTsuse.de
- v1.51
- added livecd=1 to gfxboot.cfg in function suseGFXBoot (#296778)
- changed permissons of tftpboot upload directory to 755 (#298337)
- changed vga param from 318 to 317, bootsplash works in 15bit only
- fixed mountSystem to create write part in case of an image update
reload process. Patch by James Willcox
- improved runtime check for mksquashfs (#298781)
- added kiwi-pxeboot-prebuild boot images package (#299573)
- use option --non-interactive for all zypper related actions
- fixed prebuild boot image creation

Fri Jul 27 14:00:00 2007 msAATTsuse.de
- v1.50
- fixed import of grub stages, get the stages from the initrd.
Because if this grub has been included into the iso/usb/vmx/oemboot
descriptions
- added oemboot system, usable for OEM contracts with customers
who would like to deliver their hardware with a pre-installed
Linux operating system
*this is work in progress
*

Wed Jul 25 14:00:00 2007 msAATTsuse.de
- v1.49
- added setValidateRepositoryType() method
- fixed creation of stick image, it might happen that there is no space
left to copy the grub stages or the grub message file
- fixed mountSystem() in case of squashfs/aufs mounts to use
eventually existing write extend instead of creating a new one
all the time which overwrites the previously stored data.
- fix by Jan-Christoph Bornschlegel
extraction of message file from initrd doesn\'t work in case of
relative paths

Tue Jul 24 14:00:00 2007 msAATTsuse.de
- v1.48
- fixed pattern support for local repositories

Fri Jul 20 14:00:00 2007 msAATTsuse.de
- v1.47
- added check for squashfs in iso creation (#289552)
- added special handling in probeDevices() for ata_piix (#292782)
- added suseGFXBoot function in KIWIConfig.sh, activate graphics
menu for grub (gfxmenu)
- compress RW part of an old-style live CD/DVD to enable fast boot
- fixed KIWIMigrate, creates activation files in wrong place
- activate kernel framebuffer for VM systems

Fri Jul 13 14:00:00 2007 msAATTsuse.de
- v1.46
- activate DMA mode for live media boot (#292782)
- umount kernel filesystems like /proc in KIWIImage constructor.
This will umount any kernel filesystems as soon as --create is
used in order to create an image (#292686)
- added yast second stage to be called during initial boot of a
kiwi migrated image. This will re-detect and configure the
eventually changed hardware. This one needs some testing
- fixed exit criteria in case of of KIWIImage error
- fixed image tree validation code
- removed redundant screenrc.log from image
- removed unused boot/initrd data from USB stick system image. The
data is unneeded because an extra boot partition is created
- fixed pattern search for local repositories
- removed fixed size in boot partitions, use the size of the initrd
- added umount information if there is something kiwi has mounted
- fixed parted setup, decrement max sector size p_size -= 1
- fixed this:// code in case of ForeignRepo nodes (#292138)
- added suseStripInitrd() function to reduce size of
netboot/xennetboot/isoboot boot images. The boot images are
about 12MB of size now. This is comparable to the standard suse
initrd size (#291643)

Wed Jul 11 14:00:00 2007 msAATTsuse.de
- v1.45
- fixed rpm validation expression in KIWIMigrate and change the
File::Find to prevent the call from following symlinks
- use http://software.opensuse.org/download/ within the URL
type opensuse://...

Tue Jul 10 14:00:00 2007 msAATTsuse.de
- v1.44
- fixed use of undefined reference
- fixed use of plusSuggested, means required + suggested only
- fixed report creation in KIWIMigrate.pm

Tue Jul 3 14:00:00 2007 msAATTsuse.de
- v1.43
- re-added resolv.conf to be part of the chroot system. This was the reason
for the smart error: \"Temporary failure in name resolution\" (#290379)
- added baseSetupUserPermissions() method in KIWIConfig.sh to change
the user and group ownership of the files referenced by /etc/passwd
- added searchSwapSpace() function for live media. include swap
activation of partition or into a file (#289313)
- make the attribute an optional value. If you don\'t set
it in config.xml kiwi will calculate the image size itself
- added KIWIMigrate.pm module to turn the running system into an
image description. This is in an experimental stage and was
designed for suse(rpm) based systems:
kiwi --migrate mySystem --destdir /tmp/migrated \\
[ --exclude ... --exclude ... ] [ --report ]

Fri Jun 22 14:00:00 2007 msAATTsuse.de
- v1.42
- don\'t use fstab from host system, create default file (#286298)
- allow --add-package in --upgrade mode. This will install additional
packages as specified into the existing root tree after the upgrade
was finished successfully
- added support for parted partitioner in KIWILinuxRC.sh
- fixed standalone grub setup if UNIONFS_CONFIG is used
- added optional config. parameter KIWI_KERNEL
- added vmware package/configuration description section. This
will lead to an appropriate .vmx file for use in vmware player
- fixed isoboot theme used for SLED (#288849)

Wed Jun 20 14:00:00 2007 msAATTsuse.de
- v1.41
- fixed cleanInitrd() for 64bit archs
- allow multiple pairs of --add-repo / --add-repotype options (#285845)
- added --add-package option to allow adding image packages (#285845)
- fixed relative --root path setup (#286264)

Wed Jun 20 14:00:00 2007 msAATTsuse.de
- added prebuild SLE SP1 images for build in autobuild

Wed Jun 6 14:00:00 2007 msAATTsuse.de
- v1.40
- fixed typo in KIWILinuxRC.sh (#281760)
- fixed type in documentation OpenSuSE -> openSUSE (#285483)
- added suse-repo directory for repo packages not on media (#282531)
- removed atftp from the isoboot descriptions
- mark pxelinux default file as %config in spec file
- fixed cpio creation if destination dir is a relative path (#283862)
- added getInstSourceFile() method to allow local/network
downloads from the given file. This method is outside of
the package manager functionality
- added support for squashfs/aufs in usb and vmx typed images
- changed instsource format according to the discussion with
Lars, Rudi and Jan
- renamed method: getInstSourceMetaList -> getInstSourceMetaPackageList
- renamed method: getInstSourceList -> getInstSourcePackageList
- added name, username, pwd attributes to tag
- added getInstSourceMetaFiles() method to handle file downloads
within the new tag
- changed getInstSourceRepository() method to work with
new instrepo attributes. The method now returns a hash of the
following structure: hash{reponame}{repoattr} = attrvalue

Mon Jun 4 14:00:00 2007 msAATTsuse.de
- v1.39
- added format attribute to specify virtual disk format supported
by qemu-img. By default only the raw type will be generated
- added srctool attribute to instsource section. This allows you
to set a program name for setting up the installation source
after the required meta packages were downloaded. This tool
depends on the format of the installation source and the
distribution. With kiwi the suse tool suse-instsource will
be provided

Fri May 25 14:00:00 2007 msAATTsuse.de
- v1.38
- use 192.168.0.254 as default server address in default
pxelinux.cfg/default file kiwitftp=... (#277958)

Wed May 23 14:00:00 2007 msAATTsuse.de
- v1.37
- added boot images for SLES10/SLED10 isoboot (#270881)
- added boot images for SLES10/SLED10 vmxboot (#270881)
- added boot images for SLES10/SLED10 xenboot (#270881)
- replaced tools restart and timed with reboot and read -t
- some package building changes to make rpmlint happy

Wed May 23 14:00:00 2007 msAATTsuse.de
- fixed x86_64 build for SLES based products

Tue May 22 14:00:00 2007 msAATTsuse.de
- v1.36
- fixed readlink call in KIWIBoot.pm to obtain kernel file

Tue May 22 14:00:00 2007 msAATTsuse.de
- v1.35
- fixed creating kernel link
- added check for autobuild environment

Mon May 14 14:00:00 2007 msAATTsuse.de
- v1.34
- code cleanup: reduce amount of package variables. Move module
variables into this hash, don\'t allow private data to be exported
- fixed grub virtual disk setup, grub stages were missing
- added plusSuggested for pattern validation
- use aufs || unionfs for read-only mounts in KIWIRoot.pm
- added support for aufs to isoboot live media for suse >= 10.3
using aufs for live media requires: \"flags=unified\" to be set
- added cleanInitrd method to remove the boot image data from
main memory before chroot\'ing into the system
- added loginfo method and include script output to root log
- fixed set-repo option to use this path for downloading
patterns if specified
- make importFile function easier, fixed KERNEL_LIST content
if system image doesn\'t provide it but KIWI_INITRD does.
Added options KIWI_KERNEL_OPTIONS and KIWI_BOOT_TIMEOUT.
Thanks to snorpAATTnovell.com who created the patch
- added required netboot versions for SLES and SLED
GM and SP1, activate prebuilding for GM versions (#270881)
- allow USB stick device to be selected via --bootstick-device
option. The given device must be one of the devices detected
by the getRemovableUSBStorageDevices() method (#275137)
- fixed possible race condition while searching for the correct
kernel file. kiwi will create a link pointing to the correct
file and thus kiwi can use this link later instead of a glob
search

Tue May 8 14:00:00 2007 msAATTsuse.de
- v1.33
- kiwi-pxeboot: install files to /srv/tftpboot (#248008)
- added patch for netboot and xennetboot linuxrc to allow
alternative config files. The same search order like PXE
implements it was used (#272337)
- print version information in help output
- scheme version upgrade from 1.2 to 1.3. The type specification
within the preferences section has changed.
- added --set-repo and --set-repotype options. This allows a
temporary overwrite of the first repository entry within the
config.xml file.
- added possibility to include multiple type sections into
the preferences section of the config.xml file. There should
be one primary type which is used if no other type was selected
with the option --type. If there is no primary attribute the
first type specified is the primary type
- replace readFileSystem with probeFileSystem in all
linuxrc files. Removed readFileSystem function from
KIWILinuxRC.sh

Mon May 7 14:00:00 2007 msAATTsuse.de
- v1.32
- use unionfs to implement read-only mounts. If unionfs mount
fails kiwi will use standard bind mount to access the data.
A warning message is printed on stdout in that case (#270945)

Wed May 2 14:00:00 2007 msAATTsuse.de
- v1.31
- fixed option -c / -C clash
- fixed pattern support for -32bit patterns
- added maintenance chapter to kiwi documentation
- added missing inherit attribute to KIWIScheme.xsd
- fixed --list option, method listImage()
- prevent mounting the system (/) path to the image chroot (#270945)
kiwi will bind mount the repository location only. The bind mount
now also happens on _local_ repository references only
- added --add-repo and --add-repotype option to kiwi. This allows
you to specify an additional repository used within a prepare
or upgrade process. The information will not be written to the
config.xml file

Thu Apr 26 14:00:00 2007 msAATTsuse.de
- v1.30
- added XML version validation, current XSD version 1.2
- added experimental section in config.xml.
This should be used to setup an installation source specified
by meta packages
- fixed terminal logging, don\'t use screen if you want logging
to the terminal

Mon Apr 23 14:00:00 2007 msAATTsuse.de
- v1.29
- added nfs root support to kiwi\'s netboot image
- added --logfile terminal option which causes all data from kiwi
and its screen sessions to be logged on the calling terminal
- don\'t create a 10GB default virtual disk in case of vmware and qemu
images. kiwi now calculates the size and provides the information
to the user. Overriding the calucaltion can still be done by using
the --bootvm-disksize option

Fri Apr 20 14:00:00 2007 msAATTsuse.de
- v1.28
- fixed depmod call, call it from within the chroot

Thu Apr 19 14:00:00 2007 msAATTsuse.de
- v1.27
- fixed xennetboot requirements, adapt .dot graph
- added loop search while creating virtual disk
- added --non-interactive option for zypper. Unfortunately there
are still questions in case of gpg keys or missing patterns
- added pxe: target within of config.xml
This allows you to create the system and boot image in one
creation run from the same source the system image used
- added root log file which contains all data from kiwi and
the screen sessions
- include enhancements for deploy section, allow server and
blocksize to be set, allow configuration files to be
included. fixed partition setup
- fixed suseRemoveService to know about dependant services
- added suseService/suseServiceDefaultOn by
Mike Veltman

Fri Apr 6 14:00:00 2007 msAATTsuse.de
- v1.26
- fixed logging to /var/log/kiwi
- added USER variable to enable/disable prebuild

Thu Apr 5 14:00:00 2007 msAATTsuse.de
- v1.25
- make use of kernel updates directory if it exists
- fixed repository handling for auto generated boot images.
These images could use a foreign repository for building but
could also have additional repos in its configuration. To handle
them correctly a status attribute with either \"replaceable\" or
\"fixed\" determines wheter this repository could be replaced
by a foreign node or not. Default for this option attribute
is \"fixed\"

Thu Apr 5 14:00:00 2007 msAATTsuse.de
- James Willcox added basic support for aufs.
- Changed UNIONFS_CONFIG to allow specification of union
filesystem type. Currently unionfs and aufs are possible
- added magic files to be used for filesystem detection in
netboot/xennetboot and usbboot

Wed Apr 4 14:00:00 2007 msAATTsuse.de
- v1.24
- split image code from image descriptions

Tue Apr 3 14:00:00 2007 msAATTsuse.de
- v1.23
- added support for squashfs on USB stick images
- fixed grub installation on usb stick devices
- added KIWIConfig.sh module to be used in config.sh scripts
- removed config.sh from the boot descriptions. The only action
was to copy linuxrc to init which is done in the KIWIRoot module
now

Fri Mar 30 14:00:00 2007 msAATTsuse.de
- allow use of recommended pattern entries by setting up
the option attribute patternType. Default type
is \"onlyRequired\"

Thu Mar 29 14:00:00 2007 msAATTsuse.de
- v1.22
- fixed .xenconfig, patch from Magnus Boman
- fixed kernel-default package script for vmxboot/netboot 10.3

Tue Mar 27 14:00:00 2007 msAATTsuse.de
- added squashfs requirement for kiwi-desc-livesystem
- added interrupt handling for split extends

Mon Mar 26 14:00:00 2007 msAATTsuse.de
- v1.21
- added support for compressed ISO live media based on squashfs
- added KIWIConfigure module which implements all the
configuration tasks like setting up users/groups,
autoyast, subversion, etc...

Fri Mar 23 13:00:00 2007 msAATTsuse.de
- added /var/log/kiwi

Thu Mar 22 13:00:00 2007 msAATTsuse.de
- v1.20
- added default displaymanager/windowmanager files to liveDVD
- added support for upgrading a prepared image in case
of changes to the installation source

Thu Mar 22 13:00:00 2007 msAATTsuse.de
- v1.19
- added support for squashfs/unionfs by James Willcox
the main point is to add support for squashfs/unionfs images.
Using squashfs is straightforward -- just set \'squashfs\' as the
image type. Using unionfs is a little trickier, and only netboot
is supported currently. You need to add something like
UNIONFS_CONFIG=/dev/hda2,/dev/hda3 to config. where the first
partition is the writable one (where an ext2 filesystem will
be created), and the second is the read-only filesystem (squashfs,
cramfs, whatever).

Thu Mar 22 13:00:00 2007 msAATTsuse.de
- fixed lo setup problem during boot time (#252543)
- remove include file after preinit
- update documentation

Tue Mar 20 13:00:00 2007 msAATTsuse.de
- v1.18
- fixed CD device detection (#256397)
- added functions module KIWILinuxRC for linuxrc and preinit
- fixed permission problem on live media (#252546)
- added support for using the kiwi netboot initrd for local boot
as well. This makes sense if the image type is something not
locally bootable by the standard initrd creation mechanism of
the distribution
- changed pattern support, include only required data not
recommended data (#255226)

Mon Mar 19 13:00:00 2007 msAATTsuse.de
- v1.17
- added Wyse terminal image for 10.3
- fixed pattern download. wrong patterns concerning the
architecture were used

Fri Mar 16 13:00:00 2007 msAATTsuse.de
- v1.16
- moved xenboot to xennetboot, used for PXE boot of Xen kernel
- added xenboot used as boot image for xm create -c ...
- added new target: xen:fs:boot-image. This allows you to create
Xen images with automatic boot image setup plus Xen config file
- removed --virtual option

Thu Mar 15 13:00:00 2007 msAATTsuse.de
- v1.15
- changed live DVD source to SL-OSS-factory
- fixed new smart behaviour of asking questions even if it
shouldn\'t ask. Option -y was again useless so I changed the
calls to yes | ...

Wed Mar 14 13:00:00 2007 msAATTsuse.de
- v1.14
- added netboot/suse-10.3 for network deployment
- added support for creating Xen configuration files
- fixed /etc/fstab in case of Xen deployment

Wed Mar 14 13:00:00 2007 msAATTsuse.de
- fixed architecture search in KIWIImage (isoboot)

Thu Mar 8 13:00:00 2007 msAATTsuse.de
- added helper script createLiveCD

Wed Mar 7 13:00:00 2007 msAATTsuse.de
- fixed network detection for netboot/xenboot. In case of
multiple nic\'s all modules should be loaded

Wed Mar 7 13:00:00 2007 msAATTsuse.de
- update documentation v2.8

Tue Mar 6 13:00:00 2007 msAATTsuse.de
- v1.12
- added section to config.xml

Sun Mar 4 13:00:00 2007 msAATTsuse.de
- fixed post image setup

Fri Mar 2 13:00:00 2007 msAATTsuse.de
- v1.11
- added isoinstboot to package kiwi-desc-isoboot
- moved VERSION file information into config.xml tag

Tue Feb 27 13:00:00 2007 jamesAATTximian.com
- added a new type of boot image, \'isoinstboot\', which boots from CD
and installs a system image to the hard disk (or flash drive, etc)
- added code to generate the boot config files automatically from
information found in config.xml

Tue Feb 27 13:00:00 2007 msAATTsuse.de
- added dependency graph for current package structure: .kiwi.dot

Mon Feb 26 13:00:00 2007 msAATTsuse.de
- removed atftp from vmxboot descriptions
- added repository check for local paths before adding them
- check return value from createBootStructure() method
- added timezone and keytable to XSD scheme
- fixed resolveLink() method

Wed Feb 21 13:00:00 2007 msAATTsuse.de
- v1.10
- changed liveDVD description, enable amarok again
- changed isoboot descriptions, removed static isolinux part.
kiwi will provide the isolinux and gfxboot data within the
/image/loader/ metadata directory. For SuSE this means the
package gfxboot and syslinux must be installed in order to create
the needed data for booting the ISO in graphics mode. The needed
preparation steps are implemented in the images.sh script.
- changed package structure

Fri Feb 16 13:00:00 2007 msAATTsuse.de
v1.9

* fixed broken isoboot links

Wed Feb 14 13:00:00 2007 msAATTsuse.de
- added boot//loader scheme for iso systems

Wed Feb 14 13:00:00 2007 msAATTsuse.de
v1.8

* support for qemu, vmware, Xen images

* support for zypper and smart

* xsd scheme for XML validation

* target: vmx: automatic build of vmware/qemu disk images

* target: usb: automatic build of usb boot images

Tue Feb 13 13:00:00 2007 msAATTsuse.de
- activated zypper support, currently broken in zypper
- added kiwi-images-boot requirement

Tue Feb 13 13:00:00 2007 msAATTsuse.de
- exclude archs not supported by OBS

Mon Feb 12 13:00:00 2007 msAATTsuse.de
- added needsrootforbuild
- added kiwi XSD scheme for XML validation
- added --recheck option while calling grub-install
- fixed USB stick detection if no serial identifier exists
Thanks to: Guy Coste

Mon Feb 12 13:00:00 2007 msAATTsuse.de
- better XML checking (not only syntax check). In the long
run I would like to have DTD here but currently the document
type is not stable
- added hwinfo.$DHCPCHADDR file for machine registration
- added architecture to hwtype.$DHCPCHADDR file

Fri Feb 9 13:00:00 2007 msAATTsuse.de
- added %arch tag for source specifications
- added arch=... attribute for package tags

Fri Feb 9 13:00:00 2007 msAATTsuse.de
- fixed design bug. If someone wants to prepare an image on one
machine and would like to create it on another machine its not
a good idea to refer to the machines filesystem structure. Therefore
all meta data must be present in the image preparation (chroot)
directory

Wed Feb 7 13:00:00 2007 msAATTsuse.de
- added isoboot/suse-10.3 boot image
- added modprobe.conf.local (max_loop=32) for buildhosts
- changed live CD/DVD setup to resize RW part on the fly instead
of downloading RW part + free space in one file

Wed Feb 7 13:00:00 2007 msAATTsuse.de
- changed boot image structure into groups of boot images
each group contains its own linuxrc/preinit files to which
the images of the group create a link to. This will reduce
the overhead of same linuxrc/preinit files for each image
- update documentation

Wed Feb 7 13:00:00 2007 msAATTsuse.de
- added patch from James Willcox to
fix the default search path if no path is set for preparing
the image

Tue Feb 6 13:00:00 2007 msAATTsuse.de
- better/faster device probing

Sun Feb 4 13:00:00 2007 msAATTsuse.de
- added support for qemu and vmdk (VMware) images (F:#301945)
- added targets usb: and vmx:
- use sparse files for buildhost image (Xen support)
- update documentation

Thu Feb 1 13:00:00 2007 msAATTsuse.de
- added wyseXMini-suse-10.1 to kiwi-images-wyse package

Thu Feb 1 13:00:00 2007 msAATTsuse.de
- added check for second level installation. The check will
lookup already installed packages and remove them from the
list if set

Tue Jan 30 13:00:00 2007 msAATTsuse.de
- fixed chroot path problem if repository pointer is a
symbolic link to somewhere else

Sat Jan 27 13:00:00 2007 msAATTsuse.de
- added improved size information

Fri Jan 26 13:00:00 2007 msAATTsuse.de
- added wyseXMini description for a 128 MB image usable
on a Wyse Model VX0 terminal only

Wed Jan 24 13:00:00 2007 msAATTsuse.de
- added rpm-force=true option for smart level 2 installation
- added support for zypper level 2 installation

Sun Jan 21 13:00:00 2007 msAATTsuse.de
- added perl-TimeDate to buildhost image
- fixed linuxrc to provide reiserfs in INITRD_MODULES even if
the image is not reiserfs based. This has been done for backward
compatibility

Fri Jan 19 13:00:00 2007 msAATTsuse.de
- added bsmd init script for buildservice image. This runlevel
script is used to automatically setup a md0 raid for /abuild

Wed Jan 17 13:00:00 2007 msAATTsuse.de
- added bootable flag for first system partition

Tue Jan 16 13:00:00 2007 msAATTsuse.de
- fixed pattern support
- fixed support for prebuild boot images. They can only be built
if the build user is root. I\'m hoping to get rid of that
requirement in the future

Wed Dec 27 13:00:00 2006 msAATTsuse.de
- fixed build in opensuse environment

Tue Dec 19 13:00:00 2006 msAATTsuse.de
- added documentation about image deployment
- added prebuild boot images

Thu Dec 14 13:00:00 2006 msAATTsuse.de
- added option -O dir_index for ext3 images

Wed Dec 6 13:00:00 2006 msAATTsuse.de
- added wyseGhost-suse-10.2 system to kiwi

Wed Dec 6 13:00:00 2006 msAATTsuse.de
- added support for modifiying user accounts
- added support for --list option which gives an overview
about the available image descriptions
- added support for specifying --prepare without path. In that
case it is assumed the image can be found in /usr/share/kiwi/image
- changed repository and package structure. Split kiwi-images
into kiwi-images-boot and a kiwi-images- packages

Fri Dec 1 13:00:00 2006 msAATTsuse.de
- update isoboot-suse-10.2 CD data

Wed Nov 29 13:00:00 2006 msAATTsuse.de
- starting zypper integration: added support removing services
and getting package info: KIWIManager::resetSource

Wed Nov 29 13:00:00 2006 msAATTsuse.de
- starting zypper integration: added support for adding installation
sources. This means method: KIWIManager::setupInstallationSource()

Fri Nov 24 13:00:00 2006 msAATTsuse.de
- rewrite root code to be able to easily exchange the
package manager. This has been done to be able to integrate
other package managers like zypper.
- update documentation

Wed Nov 22 13:00:00 2006 msAATTsuse.de
- reduced boot image size of netboot-suse-10.2 image

Tue Nov 21 13:00:00 2006 msAATTsuse.de
- update bsworker init skript in buildhost image

Mon Nov 20 13:00:00 2006 msAATTsuse.de
- reduced boot image size of usbboot-suse-10.2 image
- added basic system to inherit data from one config
description to another. Update documentation concerning the
inherit attribute
- fixed URL handler not to start if URL is not pointing to the
network. This will increase startup speed in case of local
build

Fri Nov 17 13:00:00 2006 msAATTsuse.de
- added ata/ tree to boot images for 10.2 and 10.2-smp
- fixed on-stick image support. Tested default 10.2 from USB
stick, works great :-)

Tue Nov 14 13:00:00 2006 msAATTsuse.de
- added support for system image on stick. One need to use
option --bootstick in combination with --bootstick-system.
The parameter to --bootstick must be an usbboot initrd
provided by kiwi. The parameter to --bootstick-system is
a kiwi generated system image. Support for this is

Thu Nov 9 13:00:00 2006 msAATTsuse.de
- fixed build for non SUSE distributions

Wed Nov 8 13:00:00 2006 msAATTsuse.de
- fixed pattern support

Mon Nov 6 13:00:00 2006 msAATTsuse.de
- added samba to the wyse image, only samba no client for now

Fri Nov 3 13:00:00 2006 msAATTsuse.de
- fixed this:// path if non absolut path specifications are used
as paramter to the --prepare option

Thu Nov 2 13:00:00 2006 msAATTsuse.de
- added wyse description to source repository
- added image size check to initrd. The needed space is now
displayed while downloading the image. If there is not enough
space the download will not start

Sat Oct 28 14:00:00 2006 msAATTsuse.de
- creating an ISO image requires kiwi to implicitly create a boot
image which is copied on the CD. It is very important that the
kernel of the image and the boot image is the same. According to
this I changed the code to use the same information
for the boot image as it was used during prepare of the main image.
The additional meta information is stored in
image-root/image/main::Prepare

Wed Oct 25 14:00:00 2006 msAATTsuse.de
- added netboot descriptions for 10.1[-smp]/10.2[-smp]
- remove loop device usage from liveCD setup
- added high level URL: this:// which points to the
description directory itself. This is usefull if you want
to add an additional repository in your image description
tree for example

Mon Oct 23 14:00:00 2006 msAATTsuse.de
- changed isolinux description files in cdboot/
- added isoboot-suse-10.2 image for 10.2 live CD setup
- include ext2 into boot images because the kernel exports
the filesystem as module now

Fri Oct 20 14:00:00 2006 msAATTsuse.de
- fix for linuxrc sata detection. The order to load the
modules piix and ata_piix is important to detect the disk

Thu Oct 19 14:00:00 2006 msAATTsuse.de
- added support for autoyast profiles
- fixed pattern support, don\'t use recommends (Prc)
- added tag to be able to remove packages when needed
- adapt documentation

Tue Oct 17 14:00:00 2006 msAATTsuse.de
- improved recursive pattern check, setup pattern cache

Fri Oct 13 14:00:00 2006 msAATTsuse.de
- added grub and hwinfo to boot images

Thu Oct 12 14:00:00 2006 msAATTsuse.de
- added /srv/
* and /var/log/
* to the in-place repository
- added support for SuSE patterns. Patterns have been
added with openSuSE 10.2 and can be used to describe a
package set with one statement. To use this system the
XML description provides the tag:


Mon Oct 9 14:00:00 2006 msAATTsuse.de
- cleanup boot package list
- added option --createpassword to create cryp codes

Thu Oct 5 14:00:00 2006 msAATTsuse.de
- fixed xen build environment setup

Mon Oct 2 14:00:00 2006 msAATTsuse.de
- added support for section. This allows the config.xml
to specifiy users/groups to be added to the image. Update
documentation concerning this feature

Fri Sep 29 14:00:00 2006 msAATTsuse.de
- added cramfs support for read-only images

Fri Sep 22 14:00:00 2006 msAATTsuse.de
- add setup of rpm-check-signatures option in xml description

Tue Sep 19 14:00:00 2006 msAATTsuse.de
- run smart update/install actions in screen session(s)
- added support for stripping binaries [--strip]

Mon Sep 18 14:00:00 2006 msAATTsuse.de
- fixed build for distributions without mboot.c32
loader packaged in syslinux package

Mon Sep 18 14:00:00 2006 msAATTsuse.de
- added support for image deployment via USB stick and CD
- added support for --logfile option

Fri Sep 15 14:00:00 2006 msAATTsuse.de
- fixed repository handling in case of same types
- fixed return code handling of mktemp() call
- fixed setupMount() if source if a loop device
- disabled gpg key checking temporarily until smart -y
really stops asking for fingerprint confirmation

Wed Sep 13 14:00:00 2006 msAATTsuse.de
- added drivers/message/fusion to xenboot image
- fixed bsworker init script to setup xen build

Tue Sep 12 14:00:00 2006 msAATTsuse.de
- fixed permissions for ssh keys in buildhost
- fixed hosts entries in buildhost

Tue Sep 12 14:00:00 2006 msAATTsuse.de
- added support for split images. These are images which
consist of two portions. The first one contains the Read/Write
data and the second contains the ReadOnly data according to
current FHS. Each image can have its own filesystem which
means you can put the ReadOnly part into a compressed filesystem
as well. Disadvantage of such an image is that it requires a
boot infrastructure to become activated.

Fri Sep 8 14:00:00 2006 msAATTsuse.de
- added linux32 to buildhost image

Wed Sep 6 14:00:00 2006 msAATTsuse.de
- added arch information to image name
- update cdboot documentation

Mon Sep 4 14:00:00 2006 msAATTsuse.de
- fixed adding subversion repository of /etc tree
- added cleanSmart() function to remove kiwi created smart
channels on HUP signal

Fri Sep 1 14:00:00 2006 msAATTsuse.de
- added support for in-place subversion repository. This
can be used to create an update dif before reloading an image

Fri Sep 1 14:00:00 2006 msAATTsuse.de
- added authorized_keys for root of buildhost image
- fixed boot images not to create the resolv.conf file
this should be done automatically by the network setup
- added ntp service for buildhost image
- added dhcp config information to sysconfig/network
This will set the hostname and resolv.conf
- added ssh host keys to the buildhost image

Thu Aug 31 14:00:00 2006 msAATTsuse.de
- fixed buildhost image: added hosts, fixed bsworker
- fixed kernel extracting, extract for boot images only

Wed Aug 30 14:00:00 2006 msAATTsuse.de
- fixed filesystem type detection in linuxrc
- fixed xenboot image to install the xen base package.
This is needed to extract the xen.gz kernel to be able
to multiboot the xen kernel with an initrd (mboot.c32)

Tue Aug 29 14:00:00 2006 msAATTsuse.de
- fixed missing kernel module.
* alias,info files
- added new xenboot subtree for boot images with xen kernel

Wed Aug 9 14:00:00 2006 msAATTsuse.de
- fixed pxe config file initrd=... statement
- added 3com tg3 and bcm5700 network drivers to suse netboot
- changed location of pxelinux.0 and pxelinux.cfg
- added support for SATA und SCSI storage devices

Tue Jul 25 14:00:00 2006 msAATTsuse.de
- added support for Live CD file systems (CD ISO)
The bootstrap code for the live CD is not yet ready

Mon Jul 24 14:00:00 2006 msAATTsuse.de
- added syslinux requirement instead of using a packed pxelinux.0
- added %defattr(-, root, root) to %files section. Thanks to
Christoph Thiel

Fri Jul 21 14:00:00 2006 msAATTsuse.de
- added support for high level urls like opensuse://
- added new XML format

Wed Jul 12 14:00:00 2006 msAATTsuse.de
- added helper script to generate grub boot disk and CD
- fixed linuxrc to mount the image os if needed
- added checkTFTP() function to check for the tftp server
1) at the kernel cmdline
2) as host tftp.$DOMAIN
3) as the same host as the DHCP server is

Fri Jul 7 14:00:00 2006 msAATTsuse.de
- added support for LVM in initrd
- added opensuse installation source in image descriptions
- added lvm services to be started if installed
- added lvm2 package to package set for suse images

Thu Jul 6 14:00:00 2006 msAATTsuse.de
- First Version of KIWI - Image system