Changelog for sapconf-3.0-67.2.i586.rpm :
Mon May 10 14:00:00 2010 roAATTsuse.de
- add rpmlintrc as source in specfile
- drop prereq for permissions, run_permissions only runs
for != instsys

Mon May 10 14:00:00 2010 kukukAATTsuse.de
- Add rpmlintrc, run SuSEconfig permissions in %post install

Sat May 8 14:00:00 2010 fabian.herschelAATTsuse.de
- Updated trigger to start uuidd via libuuid Fate#307477
- Providing prermissions file for uuidd

Fri May 7 14:00:00 2010 fabian.herschelAATTsuse.de
- Inserted requirement of uuid-runtime
- Inserted trigger script to start uuidd

Fri Mar 5 13:00:00 2010 wernerAATTsuse.de
- Avoid to be fooled by `-1\' for ULONG_MAX (bnc#556850)

Wed Feb 17 13:00:00 2010 wernerAATTsuse.de
- Remove left over from bnc#541775

Wed Dec 23 13:00:00 2009 wernerAATTsuse.de
- Enable and start sysstat boot script if sysstat is available
with the help of a triggerin script (bnc#556850)
- Remove conflict with orarun ans it was reported that the hard
overwrite of our values has been fixed in the package orarun
- Increase MAX_MAP_COUNT_MIN from 300.000 to 1.000.000 (bnc#525819)

Tue Sep 29 14:00:00 2009 wernerAATTsuse.de
- Override -1 for SHM with real unlimited (ULONG_MAX) (bnc#541775)

Tue Mar 10 13:00:00 2009 wernerAATTsuse.de
- Remove vm.hugetlb_shm_group (bnc#481496)

Tue Jan 13 13:00:00 2009 wernerAATTsuse.de
- Remove vm.disable_cap_mlock (bnc#455919)

Thu Oct 30 13:00:00 2008 wernerAATTsuse.de
- Ignore missing files in /proc/sys/ (bnc#440239)

Wed Aug 13 14:00:00 2008 wernerAATTsuse.de
- Fix boot script and use correct Stop tags

Wed Jul 23 14:00:00 2008 wernerAATTsuse.de
- Make sysstat a hard requirement (bnc#378356)
- Add sysctl parameter vm.disable_cap_mlock=1 (bnc#405094)

Mon Jan 14 13:00:00 2008 wernerAATTsuse.de
- Force enabling service

Fri Dec 7 13:00:00 2007 wernerAATTsuse.de
- Don\'t submit both sapconf and sapinit but only sapconf

Wed Nov 28 13:00:00 2007 wernerAATTsuse.de
- Do not rename package for old distributions, use sapinit
- Avoid error messages from old sapinit in case of new sapinit
- Do not remove foreign sapinit rc script

Mon Nov 26 13:00:00 2007 wernerAATTsuse.de
- Check max integer on 32bit platforms
- Add orarun to the conflicting packages

Tue Nov 13 13:00:00 2007 wernerAATTsuse.de
- Rename spainit to spaconf
- Clean out old syssctl.conf from SAPinit

Wed Nov 7 13:00:00 2007 wernerAATTsuse.de
- Add SAPINIT to Provides of boot.sapconf
- Add Suggests line with sysstat, cron, and logrotate
- If sysstat is installed boot.sapconf should depend on

Mon Oct 29 13:00:00 2007 wernerAATTsuse.de
- Clean up and better error handling

Fri Oct 26 14:00:00 2007 wernerAATTsuse.de
- New package sapinit from scratch version 3.0

Fri Oct 19 14:00:00 2007 wernerAATTsuse.de
- More work on bug #280024

* Make old sysctl.conf entries compact

* Edit only modified parameters

Wed Oct 17 14:00:00 2007 wernerAATTsuse.de
- Avoid multi line markers and avoid multi line entries for sysctl
kernel parameters with vector values (bug #280024)

Sat Sep 8 14:00:00 2007 DOlssonAATTNovell.com
- New version 2.0.2.
- The script \"SAPinit\" can now handle SLES 9 cases as well [#292314].
- Updated the description text in the \".spec\" file.
The text was made more clear with regards to the usage of the
\"/dev/shm\" file system, as well as the various used script names.
It now also covers the different behaviors for SLES 9 and SLES 10.
- Fixed issue under SLES 10, where a wrong sizing factoring was being
used, when determining whether and how to do updates of the DEVSHM
entry in FSTAB.
- Fixed issue under SLES 10, where DEVSHM got remounted, although
there was not any reason to remount it.

Thu Jul 12 14:00:00 2007 DOlssonAATTNovell.com
- Fixed various minor issues with the \"susebuild\" tag in
\"packaging/Makefile\".
- Renamed \"/etc/init.d/,/usr/sbin/rc}sapinit\" to \"sapconfig\" in
order to allow for SAP to make use of the name \"sapinit\" for
their own start up script of the SAP system applications.
[#292726 for SLES 9] and [#292727 for SLES 10].
- Updated the description text in \".spec\" file to reflect the
multiple usage of the package on SLES 9 and SLES 10.
[#292726 for SLES 9] and [#292727 for SLES 10].

Mon Jun 18 14:00:00 2007 DOlssonAATTNovell.com
- Removed wrong \"Conflict:\" statement.

Wed May 16 14:00:00 2007 roAATTsuse.de
- remove \"noarch\" from specfile again.
arch changes are not supported during SP update

Tue May 15 14:00:00 2007 DOlssonAATTNovell.com
- Fixed specification issues in \"
*.spec\" file with the tags
\"Provides:\", \"Obsoletes:\", and \"Conflicts:\".
- Fixed issue with rearranging comments containing the \"/dev/shm\"
string [#272721].
- Fixed typos in error messages issued by \"SAPinit\" script.
- Fixed setting of path name of the \"sysconfigSAPinit\" constant in
the \"SAPinit\" script, when running in debugging mode.

Tue May 8 14:00:00 2007 roAATTsuse.de
- change \"test && foo\" \"if then foo fi\" in postinstall (#272328)

Mon May 7 14:00:00 2007 DOlssonAATTNovell.com
- In order to allow for initial system installation ([#269140] and
[#269235]):
+ \"Requires\" and \"Requires(post):\" tags were rewritten.
+ Preventing \"SAPinit\" from being executed during post
installtion.

Fri May 4 14:00:00 2007 DOlssonAATTNovell.com
- In \"SAPinit\" do not use \"-o mount\", when only mounting the
\"/dev/shm\" file system (option does not exist anymore).
- Added comments to \"
*.spec\" file describing the usage of the
\"Provides:\" tag.
- Further refined the \"Provides:\" and \"Obsoletes:\" tags.

Thu May 3 14:00:00 2007 DOlssonAATTNovell.com
- Added instruct to stop building not needed debugging packages in
Autobuild.
- Based on feedback from testers of the newest \"sapinit\" RPM package,
the \"Provides:\" and \"Obsoletes:\" tags were refine.
- Added LSB mandentory \"Short-Description:\" tag to \"sapinit\".

Sun Apr 22 14:00:00 2007 roAATTsuse.de
- use fillup as mandatory for sysconfig files

Tue Apr 17 14:00:00 2007 DOlssonAATTNovell.com
- Updated \".spec\" file to match that of the SUSE/Novell standards.
- Fixed \"awk\" output to stay in integer mode, when having huge
figures for available virtual memory.

Sat Apr 14 14:00:00 2007 DOlssonAATTNovell.com
- Using recommended instead of minimum value, if user has specified
usage of \"unlimited\" (-1) for a parameter that does not allow
this usage.

Fri Apr 13 14:00:00 2007 DOlssonAATTNovell.com
- The \"/etc/init.d/sapinit\" script now provides \"SAPINIT\" instead
of \"SAP\".
- Dropped \"sh_opt\" in \"/etc/init.d/sapinit\" (unknown command in
\"sh\").
- In \"SAPinit.sh\":
+ Removed forgotten debug lines in \"SAPinit.sh\".
+ Prepared for option add-ons in lowering of info levels.
+ Cleaned up in information texts (making them more consistent).
+ Allowed for updating of \"/etc/fstab\" with actual found sizes
instead of always using the recommended/minimum value.
+ Fixed bug in handling of the updating of \"/etc/fstab\", when
\"/dev/shm\" is already mounted and big enough, but on entered
in \"/etc/fstab\".
+ Now only activating the \"/etc/sysctl.conf\" parameters, when
there is a real need for this.
- In the spec file:
+ Corrected the \"Requires\" to reflect what is really needed.
+ Expanded the \"%post\" section with clean up facilities after the
version 1.x series of this package.
+ Fixed a wrong setup of the \"%preun\" section.

Thu Apr 12 14:00:00 2007 DOlssonAATTNovell.com
- Updated spec file with newest required files the scripts need.
- Implemented the activation of the kernel parameters entered into
the \"/etc/sysctl.conf\" file.

Thu Apr 5 14:00:00 2007 DOlssonAATTNovell.com
- Implemented the settings of size in \"/etc/fstab\", when needed.
- Implemented the settings of the kernel parameters in
\"/etc/sysctl.conf\", when needed.
- Updated the \".spec\" file with more required commands.
- Clearified the description text in the \".spec\" file (and thus in
the README file, too).

Fri Mar 30 14:00:00 2007 DOlssonAATTNovell.com
- Finished the last cleanups in the \".spec\" file.
- Refined the \"Makefile\" to allow for building of needed files for
the check-in into the SUSE/Novell build system.
- All fixes for the below mentioned bugzillas have now been implemented
in accordance with the requirements from SAP (i.e. using recommended
values, when nothing else specified, and allowing user to change the
settings, but not under a certain minimum as specified by SAP):
[#214311] Package \"sapinit\" sets shared memory too low
[#197587] dedicated tmpfs /dev/shm does not exist anymore
[#187387] \"sapinit\" sysctl settings for 64-bit architectures.

Thu Mar 29 14:00:00 2007 DOlssonAATTNovell.com
- Fixed up the \".spec\" file to be able to actually build the \"sapinit\"
package.
- Created subdirectory \"packaging\" containing \"Makefile\" for easy
packaging.

Tue Mar 27 14:00:00 2007 DOlssonAATTNovell.com
- Reworked the \"SAPinit.sh\" script and \"SAPinit\" config file in order
to be able to define the usage of recommended values (using 0) and
in special cases \"unlimited\" (using -1).
- Updated the README file to match the \".spec\" file.
- Added testing on \"SAPinitDEBUG\" to allow for reading of the
\"SAPinit\" file from current directory.
- Added validation of the user defined parameters read from
\"/etc/sysconfig/SAPinit\".
- Fixed the setting of the \"SEM{MSL,MNS,OPM,MNI}_Cur\" parameters.
- Documented the usage and hierarchy of \"
*_MIN[32]\" and \"
*_ReV\"
parameters.

Mon Mar 26 14:00:00 2007 DOlssonAATTNovell.com
- Reworked \".spec\" file to now making use of a compressed TAR ball
with the sources.
- Reworked \".spec\" file in accordance with the \"Packagers Manual\"
guidelines.
- Added \"try-restart\" as argument to \"[rc]sapinit\".
Currently, it only maps to a \"[rc]sapinit start\".
- Updated copyright and author informations to the currently known
correct state.

Fri Mar 23 13:00:00 2007 DOlssonAATTNovell.com
- Added \"/etc/sysconfig/SAPinit\" allowing users to change the
recommended values
- Updated the \".spec\" file to only build for \"noarch\", while the
scripts are architecture independed.
- Updated \"SAPinit\" to read the newly added \"/etc/sysconfig/SAPinit\"
configuration file.

Thu Mar 22 13:00:00 2007 DOlssonAATTNovell.com
- Renamed \"sysctl-sapinit\" to \"SAPinit\".
Seemed to make sense, while the script is now handling a lot more
than just setting the \"sysctl\" kernel parameters.
- Script completely reworked in order to be able to fullfil the SAP
requirements for the functionality of the script.
- Script now contains hardcoded minimum and recommended values as
defined by SAP for the various parameter values the script handles.
- Preparing script for usage of a \"/etc/sysconfig/sapinit\" file
containing user defined values for the various settable parameters.
- Updated the \".spec\" file to reflect the current state of the script.

Fri Mar 9 13:00:00 2007 dhessAATTsuse.de
- new version 2.0
- renamed rcsap to rcsapinit
- removed optional functionality to start SAP services at boot time automatically.
This is usually done by using SAP mechanisms today, so not required in the OS.
- removed not longer needed sysconfig.sap and fillup macro
- removed obsolete symlinks rcsap and rcsapr3
- redirect debug info to syslog daemon (logger)
- removed SHMFS_SIZE from /etc/sysconfig/sap
TMPFS dynamically calculated and configured in new script sysctl-sapinit
- added script sysctl-sapinit to set proper kernel paramters and to dynamically set and mount tmpfs
- removed obsolete sysctl.conf.
* files
- removed obsolete script sysctl-wrapper

Mon Sep 4 14:00:00 2006 starkAATTsuse.de
- fixed fillup_and_insserv call

Wed Aug 9 14:00:00 2006 starkAATTsuse.de
- added SHMFS_SIZE to sysconfig/sapr3 and mount it via boot.sap
service (#197587)
- only set higher sysctl values (#187387)
- renamed init script to sap