Changelog for yast2-cluster-2.15.0-8.44.11.noarch.rpm :
Wed May 29 14:00:00 2013 dmzhangAATTsuse.com
- bnc#813175, set default value of clear_node_high_bit to NEW

Mon Apr 8 14:00:00 2013 dmzhangAATTsuse.com
- bnc#813174, Missing space in error message \"NodeID 0 is reserved\"
bnc#813175, Auto Generate Node ID not enabled by default
bnc#811318, Prefilled etries are not filled in in second run
of yast2 cluster

Sun Jan 6 13:00:00 2013 dmzhangAATTsuse.com
- bnc#727344, put the Service section to last.
this is more reasonable

Mon Jul 16 14:00:00 2012 dmzhangAATTsuse.com
- bnc#743111, change L10N: Untranslated strings

Mon Jul 16 14:00:00 2012 dmzhangAATTsuse.com
- bnc#737253, add /etc/drbd.conf to csync2.cfg

Wed May 30 14:00:00 2012 dmzhangAATTsuse.com
- bnc#747033, yast2 deteceted the wrong bind network address

Wed Mar 14 13:00:00 2012 tserongAATTsuse.com
- Booth config file is now /etc/booth/booth.conf

Tue Feb 21 13:00:00 2012 tserongAATTsuse.com
- Add /etc/sysconfig/booth to default csync2 file list

Tue Feb 14 13:00:00 2012 dmzhangAATTsuse.com
- bnc#589636, main toolbar disappear
- bnc#710971, fix-typo

Thu Jan 19 13:00:00 2012 dmzhangAATTsuse.com
- bnc#736705,enable igmp for EXT NIC in susefirewall2

Tue Jan 10 13:00:00 2012 dmzhangAATTsuse.com
- bnc#736705,yast2 cluster doesn\'t open port for csync2

Sun Oct 30 13:00:00 2011 dmzhangAATTsuse.com
- bnc#720068,yast2 cluster should add Cluster service
into allowed services in firewall automatically

Tue Oct 25 14:00:00 2011 dmzhangAATTsuse.com
- try to add crmsh to the yast2-cluster required list
- mentioned in bnc#725170

Mon Oct 17 14:00:00 2011 dmzhangAATTsuse.com
- bnc#723273,add Member Address help text

Tue Aug 30 14:00:00 2011 xwhuAATTnovell.com
- bnc#713690, autoyast missed csync2 key.
- bnc#715186, generate correct conntrackd.conf
- bnc#708670, display ring information while cloneing in autoyast

Thu Aug 11 14:00:00 2011 xwhuAATTnovell.com
- bnc#710964, change the default conntrackd config file to
/etc/conntrackd/conntrackd.conf
- bnc#708280, move the firewall related settings into
/etc/sysconfig/SuSEFirewall2.d/services
- bnc#710981, update help text to sync with conntracd config.
Also, the parameters configed are valided before generating.

Wed Aug 3 14:00:00 2011 xwhuAATTnovell.com
- bnc#709591, The unicast setting was not cloned correctly.

Fri Jul 29 14:00:00 2011 xwhuAATTnovell.com
- bnc#708319, open firewall for hawk too.
Also, try to install hawk by default when starting this module.

Tue Jul 19 14:00:00 2011 xwhuAATTnovell.com
- bnc#584347, disable the rrp_mode when only 1 ring is set.
- bnc#588341, it is required to restart xinetd regardless to it\'s
current setting.
- bnc#590153, open port on the firewall for clvmd

Tue Jul 12 14:00:00 2011 xwhuAATTnovell.com
- Make autoyast supportting transport mode of udpu

Fri Jul 1 14:00:00 2011 xwhuAATTnovell.com
- Add support for conntrackd configuration (fate#311872)

Fri Jun 17 14:00:00 2011 xwhuAATTnovell.com
- Readd the missing agents while exporting from SVN

Wed Jun 15 14:00:00 2011 xwhuAATTnovell.com
- Merge all changes into SVN
- bnc#540627, remove X-KDE-SubstituteUID

Fri May 20 14:00:00 2011 cmengAATTnovell.com
- fate #311084
Support corosync\'s unicast mode in yast2 cluster module

Thu Jun 3 14:00:00 2010 xwhuAATTnovell.com
- bnc#610663
. read corosync.conf.example if corosync.conf doesn\'t exist
. increase token timeout to 5000ms defaultly
. increase consensus time to 6000ms defaultly
. turn off timestamp, to_stderr by default

Mon Mar 22 13:00:00 2010 cmengAATTnovell.com
- Move cluster module into High Availability category again.
(bnc #575787)

Fri Mar 19 13:00:00 2010 cmengAATTnovell.com
- Add quotes for echo command. (bnc #589634)

Fri Mar 19 13:00:00 2010 cmengAATTnovell.com
- try to restart xinetd while trunning csync2 on/off. (bnc #588341)

Fri Mar 12 13:00:00 2010 cmengAATTnovell.com
- Add autoyast support (bnc #581695)
- Move cluster mobule back into Misc category.

Thu Mar 4 13:00:00 2010 cmengAATTnovell.com
- Move cluster module into High Availability category.
(bnc #575787)
- Fix some typo mistakes (bnc #585406 #585573)

Wed Mar 3 13:00:00 2010 xwhuAATTnovell.com
- bnc#584347, rrpmode is read wrong

Wed Mar 3 13:00:00 2010 cmengAATTnovell.com
- Add /etc/csync2/csync2.cfg & /etc/csync2/key_hagroup to the
csync2 suggest file list.

Tue Feb 23 13:00:00 2010 cmengAATTnovell.com
- Add a line \"X-SuSE-YaST-AutoInstClonable=true\" to cluster.destop
(bnc #581695)

Tue Feb 23 13:00:00 2010 cmengAATTnovell.com
- Move starting mgmtd toggle into a new framebox. (bnc #574381)

Fri Feb 12 13:00:00 2010 xwhuAATTnovell.com
- bnc#579084, fix typo in firstrunseq

Fri Feb 5 13:00:00 2010 xwhuAATTnovell.com
- Use /etc/drbd.d for the default csync2 file list.

Fri Feb 5 13:00:00 2010 xwhuAATTnovell.com
- Add csync2 configuration dialog into firstrun seq.

Fri Feb 5 13:00:00 2010 xwhuAATTnovell.com
- Decide if it is firstrun by checking /etc/corosync/corosync.conf

Wed Feb 3 13:00:00 2010 xwhuAATTnovell.com
- fix typo in the default csync2 file list

Wed Jan 20 13:00:00 2010 xwhuAATTnovell.com
- Change consensus to 4000 as default (bnc#571833)
Update some other config values for totem as well.
- bnc#572194, ignore the output from corosync-keygen
- bnc#572171, remove to_file parameter
- bnc#571830, rename pacemaker-pygui to pacemaker-mgmt

Wed Jan 20 13:00:00 2010 cmengAATTnovell.com
- Add two new scr agents: cfg_packmaker.scr, cfg_openais.scr

Tue Jan 19 13:00:00 2010 xwhuAATTnovell.com
- Upgrade ag_openais to use /etc/corosync/corosync.conf
/etc/init.d/openais is still used for start/stop service
- Add a default file list for csync2

Wed Jan 13 13:00:00 2010 cmengAATTnovell.com
- add support of csync2 (fate#308359) related

Wed Mar 11 13:00:00 2009 xwhuAATTsuse.de
- Fix typos in help message (bnc#474915)

Mon Mar 2 13:00:00 2009 xwhuAATTsuse.de
- Change the suggested configure value of totem for HAE