Changelog for ctdb-pcp-pmda-debuginfo-2.3-3.1.i586.rpm :
Thu Jul 11 14:00:00 2013 ddissAATTsuse.com
- Conditionally package the CTDB Perforance Co-Pilot monitoring agent.
+ Only built if suse_version is greater than 1140.
+ Add ctdb-pcp-pmda-rpmlintrc to filter out devel-file-in-non-devel-package
warning.

Thu Jul 11 14:00:00 2013 ddissAATTsuse.com
- Update to version 2.3
+ 2 new configuration variables for 60.nfs eventscript:
- CTDB_MONITOR_NFS_THREAD_COUNT
- CTDB_NFS_DUMP_STUCK_THREADS
+ Removed DeadlockTimeout tunable. To enable debug of locking issues set
CTDB_DEBUG_LOCKS=/etc/ctdb/debug_locks.sh
+ In overall statistics and database statistics, lock buckets have been
updated to use following timings:
< 1ms, < 10ms, < 100ms, < 1s, < 2s, < 4s, < 8s, < 16s, < 32s, < 64s, >= 64s
+ Initscript is now simplified with most CTDB-specific functionality
split out to ctdbd_wrapper, which is used to start and stop ctdbd.
+ Add systemd support.
+ CTDB subprocesses are now given informative names to allow them to
be easily distinguished when using programs like \"top\" or \"perf\".
+ ctdb tool should not exit from a retry loop if a control times out
(e.g. under high load). This simple fix will stop an exit from the
retry loop on any error.
+ When updating flags on all nodes, use the correct updated flags. This
should avoid wrong flag change messages in the logs.
+ The recovery daemon will not ban other nodes if the current node
is banned.
+ ctdb dbstatistics command now correctly outputs database statistics.
+ Fixed a panic with overlapping shutdowns (regression in 2.2).
+ Fixed 60.ganesha \"monitor\" event (regression in 2.2).
+ Fixed a buffer overflow in the \"reloadips\" implementation.
+ Fixed segmentation faults in ping_pong (called with incorrect
argument) and test binaries (called when ctdbd not running).
+ The recovery daemon on stopped or banned node will stop participating in any
cluster activity.
+ Improve cluster wide database traverse by sending the records directly from
traverse child process to requesting node.
+ TDB checking and dropping of all IPs moved from initscript to \"init\"
event in 00.ctdb.
+ To avoid \"rogue IPs\" the release IP callback now fails if the
released IP is still present on an interface.
- Update to version 2.2
+ The \"stopped\" event has been removed.
+ New --pidfile option for ctdbd, used by initscript
+ The 60.nfs eventscript now uses configuration files in
/etc/ctdb/nfs-rpc-checks.d/ for timeouts and actions instead of
hardcoding them into the script.
+ Notification handler scripts can now be dropped into /etc/ctdb/notify.d/.
+ The NoIPTakeoverOnDisabled tunable has been renamed to
NoIPHostOnAllDisabled and now works properly when set on individual
nodes.
+ New ctdb subcommand \"runstate\" prints the current internal runstate.
Runstates are used for serialising startup.
+ The Unix domain socket is now set to non-blocking after the
connection succeeds. This avoids connections failing with EAGAIN
and not being retried.
+ Fetching from the log ringbuffer now succeeds if the buffer is full.
+ Fix a severe recovery bug that can lead to data corruption for SMB clients.
+ The statd-callout script now runs as root via sudo.
+ \"ctdb delip\" no longer fails if it is unable to move the IP.
+ A race in the ctdb tool\'s ipreallocate code was fixed. This fixes
potential bugs in the \"disable\", \"enable\", \"stop\", \"continue\",
\"ban\", \"unban\", \"ipreallocate\" and \"sync\" commands.
+ The monitor cancellation code could sometimes hang indefinitely.
This could cause \"ctdb stop\" and \"ctdb shutdown\" to fail.
+ The socket I/O handling has been optimised to improve performance.
+ IPs will not be assigned to nodes during CTDB initialisation. They
will only be assigned to nodes that are in the \"running\" runstate.
+ Improved database locking code. One improvement is to use a
standalone locking helper executable - the avoids creating many
forked copies of ctdbd and potentially running a node out of memory.
+ New control CTDB_CONTROL_IPREALLOCATED is now used to generate
\"ipreallocated\" events.
+ Message handlers are now indexed, providing a significant
performance improvement.

Fri Oct 19 14:00:00 2012 ddissAATTsuse.com
- Update to version 1.2.52
+ util: ctdb_fork() closes all sockets opened by the main daemon
+ Logging: Map TEVENT_DEBUG_FATAL to DEBUG_CRIT
+ Eventscripts: \"recovered\" event should not fail on NATGW failure
+ common: Debug ctdb_addr_to_str() using new function ctdb_external_trace()
+ Initscript: Kill any existing ctdbd processes if the ping succeeds
+ Eventscripts: new functions set_proc() and get_proc().
+ Eventscripts: Add \"reconfigure\" pseudo-event for policy routing

Wed Aug 8 14:00:00 2012 lmuelleAATTsuse.com
- Update to version 1.2.46
+ Add ltdbtool and man page

Tue Feb 28 13:00:00 2012 lmuelleAATTsuse.de
- Split the PreReq in separate lines.
- PreReq coreutils instead of fileutils.

Tue Feb 7 13:00:00 2012 ddissAATTsuse.de
- Remove stop_on_removal and restart_on_update pre/post uninstall hooks, ctdbd
processes are managed by the CTDB resource agent; (bnc#745388).

Tue Feb 7 13:00:00 2012 ddissAATTsuse.de
- Mark event scripts as %verify(not mode) to ensure rpm --verify does not
complain about mode changes made by enablescript; (bnc#694262).

Thu Jan 26 13:00:00 2012 lmuelleAATTsuse.de
- Use correct license, GPLv3+ for the package.

Mon Jan 23 13:00:00 2012 lmuelleAATTsuse.de
- Simplify conditional BuildRrequires of pkg-config.

Wed Dec 21 13:00:00 2011 cooloAATTsuse.com
- Add autoconf as buildrequire to avoid implicit dependency for post-11.4
systems.

Tue Dec 20 13:00:00 2011 cooloAATTsuse.com
- Remove call to suse_update_config macro for post-11.4 systems.

Sun Sep 18 14:00:00 2011 jengelhAATTmedozas.de
- Remove redundant tags/sections from specfile

Tue May 10 14:00:00 2011 jmcdonoughAATTsuse.de
- Update to version 1.2.29
+ Interface handling updates
+ Reduce logging at lower levels
+ Event checking updates
+ Various other fixes

Fri Apr 1 14:00:00 2011 jmcdonoughAATTsuse.de
- Update to version 1.2.27
+ Lots of fixes
+ Remove nfstickle event script
+ Add ganesha event script

Mon Aug 23 14:00:00 2010 jmcdonoughAATTsuse.de
- Update to version 1.2.
+ Many tdb cleanups and fixups by rusty.
+ Create cnfs event script and crash cleanup script.
+ Create libctdb and reorganize headers.
+ Expand test suite significantly.
+ Remove \"ctdb freeze\" command.
+ Lots of fixes.

Sun Apr 25 14:00:00 2010 lmuelleAATTsuse.de
- Buildrequire pkg-config only for SUSE based products.

Sat Apr 24 14:00:00 2010 cooloAATTnovell.com
- buildrequire pkg-config to fix provides

Fri Apr 2 14:00:00 2010 jmcdonoughAATTsuse.de
- Update to version 1.0.114.
+ Lots of changes from Metze
- Update to version 1.0.113.
+ Incorrect use of dup2() could cause ctdb to spin eating 100% cpu.
- Update to version 1.0.112.
+ Revert the use of wbinfo --ping-dc as it is proving too unreliable.
+ Minor testsuite changes.
- Update to version 1.0.111.
+ Fix a logging bug when an eventscript is aborted that could cause a crash.
+ Add back cb_status that was lost in a previous commit.
- Update to version 1.0.110.
+ Metxe: fix for filedescriptor leak in the new eventscript code.
+ Rusty: fix for a crash bug in the eventscript code.
- Update to version 1.0.109.
+ Massive eventscript updates. (bz58828)
+ Nice the daemon instead of using realtime scheduler, also use mlockall() to
reduce the risk of blockign due to paging.
+ Workarounds for valgrind when forking once for each script. Valgrind consumes
massive cpu when terminating the scripts on virtual systems.
+ Sync the tdb library with upstream, and use the new TDB_DISALLOW_NESTING flag.
+ Add new command \"ctdb dumpdbbackup\"
+ Start using the new tdb check framework to validate tdb files upon startup.
+ A new framework where we can control health for individual tdb databases.
+ Fix a crash bug in the logging code.
+ New transaction code for persistent databases.
+ Various other smaller fixes.
- Update to version 1.0.108.
+ Transaction updates from Michael Adam.
+ Use the new wbinfo --ping-dc instead of -p in the eventscript for samba
the check if winbindd is ok.
+ Add a better \"process-exist\" for samba so it will automatically
reap smbd\'s on stopped and banned nodes to reclaim subrecords.
This will be done a bit differently in the next release.
+ Use a statically allocated buffer for the \'first-time\' capture buffer
to reduce the pressure on malloc/free.
- Update to version 1.0.107.
+ fix for rusty to solve a double-free that can happen when there are
multiple packets queued and the connection is destroyed before
all packets are processed.
- Update to version 1.0.106.
+ Buildscript changes from Michael Adam
+ Dont do a full recovery when there is a mismatch detected for ip addresses,
just do a less disruptive ip-reallocation
+ When starting ctdbd, wait until all initial recoveries have finished
before we issue the \"startup\" event.
So dont start services or monitoring until the cluster has
stabilized.
+ Major eventscript overhaul by Ronnie, Rusty and Martins and fixes of a few
bugs found.

Thu Feb 11 13:00:00 2010 jengelhAATTmedozas.de
- Use %{configure} macro to ensure --libdir=..lib64 is passed to configure on
64-bit architectures.
- Add %{_smp_mflags} macro while calling make.

Thu Dec 17 13:00:00 2009 jengelhAATTmedozas.de
- Enable parallel building.

Wed Dec 9 13:00:00 2009 jmcdonoughAATTsuse.de
- Save and restore scheduling policy to prevent fatal error
with nonzero priority; (bnc#552845).

Thu Nov 19 13:00:00 2009 lmuelleAATTsuse.de
- Update to version 1.0.105.
+ Fix a bug where we could SEGV if multiple concurrent \"ctdb eventscript
...\" are used and some of them block.
+ Monitor the daemon from the syslog child process so we shutdown cleanly
when the main daemon terminates.
+ Add a 500k line ringbuffer in memory where all log messages are stored.
+ Add a \"ctdb getlog \" command to pull log messages from the in
memory ringbuffer.
+ Fixes to cifs and nfs autotests
+ Fix a bashism in 11.natgw
- Update to version 1.0.104.
+ We can now use killtcp to kill local connections for nfs so change the
killtcp script to kill both directions of an NFS connection.
+ When using natgw, try to avoid using a UNHEALTHY node as the natgw master.
+ Fix a SEGV bug in the recent change to the eventscripts to allow the
timeout to apply to each individual script.
+ Fix a talloc bug in teh vacuuming code that produced nasty valgrind
warnings.
+ Set up ulimit to create core files for ctdb, and spawned processes by
default.
+ Remove the wbinfo -t check from the startup check that winbindd is happy.
+ Enhance the test for bond devices so we also check if the sysadmin have
disabled all slave devices using \"ifdown\".
- Update to version 1.0.103.
+ Dont use vacuuming on persistent databases.
+ Transaction updates to persistent databases.
+ Dont activate service automatically when installing the RPM.
+ Create a child process to send all log messages to, to prevent a hung/
slow syslogd from blocking the main daemon. In this case, discard log
messages instead and let the child process block.
- Update to version 1.0.102.
+ Fix for the vacuuming code.
+ Stronger tests for persistent database filename tests.
+ Improve the log message when we refuse to startup since wbinfo -t fails
to make it easier to spot in the log.
+ Update the uptime command output and the man page to indicate that \"time
since last ...\" if from either the last recovery OR the last failover.
+ Transaction updates.
- Update to version 1.0.101.
+ Create a separate context for non-monitoring events so they dont interfere
with the monitor event.
+ Make sure to return status 0 in teh callback when we abort an event.
- Update to version 1.0.100.
+ Change eventscript handling to allow EventScriptTimeout for each
individual script instead of for all scripts as a whole.
+ Enhanced logging from the eventscripts, log the name and the duration for
each script as it finishes.
+ Add a check to use wbinfo -t for the startup event of samba.
+ TEMP: allow clients to attach to databases even when teh node is in
recovery mode.
+ Dont run the monitor event as frequently after an event has failed.
+ DEBUG: in the eventloops, check the local time and warn if the time
changes backward or rapidly forward.
+ Fix a bug where recovery master becoming unhealthy did not trigger an ip
failover.
+ Disable the multipath script by default.
+ Automatically re-activate the reclock checking if the reclock file is
specified at runtime. Update manpage to reflect this.
+ Add a mechanism where samba can register a SRVID and if samba unexpectedly
disconnects, a message will be broadcasted to all other samba daemons.
+ Log the pstree on hung scripts to a file in /tmp instead of
/var/log/messages.
+ Change ban count before unhealthy/banned to 10.
- Update to version 1.0.99.
+ Fix a SEGV in the new db priority code.
+ Eliminate a ctdb_fatal() if there is a dmaster violation detected.
+ During testing we often add/delete eventscripts at runtime. This could
cause an eventscript to fail and mark the node unhealthy if an eventscript
was deleted while we were listing the names. Handle the errorcode and make
sure the node does not becomne unhealthy in this case.
+ Lower the debuglevel for the messages when ctdb creates a filedescruiptor
so we dont spam the logs with these messages.
+ Dont have the RPM automatically restart ctdb.
+ Add a missing transaction_cancel() in the handling of persistent
databases.
+ Treat interfaces with the anme ethX
* as bond devices in 10.interfaces so
we do the correct test for if they are up or not.
- Update to version 1.0.98.
+ Fix for the vacuuming database.
+ Create a directory where the test framework can put temporary overrides
to variables and functions.
+ Wait a lot longer before shutting down the node when the reclock file is
incorrectly configured, and log where it is configured.
+ Try to avoid running the \"monitor\" event when databases are frozen.
+ Add logging for every time we create a filedescriptor so we can trap fd
leaks.
- Update to version 1.0.97.
+ Update onnode to allow specifying an alternative nodes file from the
command line and also to be able to specify hostnames on the list of
targets : onnode host1,host2,...
- Update to version 1.0.96.
+ Add more debugging output when eventscripts have trouble. Print a
\"pstree -p\" to the log when scripts have hung.
+ Update the initscript, only print the \"No reclock file used\" warning when
we do \"service ctdb start\", dont also print them for all other actions.
+ When changing between unhealthy/healthy state, push a request to the
recovery master to perform an ip reallocation instead of waiting for the
recovery master to pull and check the state change.
+ Fix a bug in the new db-priority handling where a pre-.95 recovery master
could no longer lock the databases on a post-.95 daemon.
+ Always create the nfs state directories during the \"monitor\" event. This
makes it easier to configure and enable nfs at runtime.
+ Forward-port a simper deadlock avoiding patch from the 1.0.82 branch. This
is a simpler versionof the \"db priority lock order\" patch that went into
1.0.95, and will be kept for a few versions until samba has been updated
to use the functionality from 1.0.95.
- Update to version 1.0.95.
+ Add database priorities. Allow samba to set the priority of databases and
lock the databases in priority order during recovery to avoid a deadlock
when samba locks one database then blocks indefinitely while waiting for
the second databaso to become locked.
+ Be aggressive and ban nodes where the recovery transaction start call
fails.
- Update to version 1.0.94.
+ Be very aggressive and quickly ban nodes that can not freeze their
databases.
- Update to version 1.0.93.
+ When adding an ip, make sure to update this assignment on all nodes so it
wont show up as -1 on other nodes.
+ When adding an ip and immediately deleting it, it was possible that the
daemon would crash accessing already freed memory. Readjust the memory
hierarchy so the destructors are called in the right order.
+ Add a handshake to the recovery daemon to eliminate some rare cases where
addip/delip might cause a recovery to occur.
+ Updated onnode documenation.
+ Updates to the natgw eventscript to allow disabling natgw at runtime.
- Update to version 1.0.92.
+ Test updates and merge.
+ Add notification for \"startup\".
+ Add documentation for notification.
+ Fix for restarting vsftpd in the eventscript.
- Update to version 1.0.91.
+ New vacuum and repack design.
+ Add a new eventscript 01.reclock that will first mark a node unhealthy and
later ban the node if the reclock file can not be accessed.
+ Add machinereadable output to the ctdb getreclock command.
+ Merge transaction updates.
+ In the new banning code, reset the culprit count to 0 for all nodes that
could successfully compelte a full recovery.
+ Dont mark the recovery master as a ban culprit because a node in the
cluster needs a recovery. This happens naturally when using ctdb recover
command so dont make this cause a node to be banned.
- Update to version 1.0.90.
+ Be more forgiving for eventscripts that hang during startup.
+ Fix for a banning bug in the new banning logic.

Wed Nov 18 13:00:00 2009 lmuelleAATTsuse.de
- Default socket path to /var/lib/ctdb/.

Tue Sep 22 14:00:00 2009 jmcdonoughAATTsuse.de
- Update to version 1.0.89
+ Make it possible to manage winbind independently of samba.
+ Add new prototype banning code
+ Overwrite the vsftpd state file instead of appending. This eliminates
annoying errors in the log.
+ Redirect some iptables commands to dev null
+ From Michael A, explicitely set the broadcast when we takeover a public ip
+ Remove a reclock file check we no longer need
+ Skip any persistent database files ending in .bak
- Version 1.0.88
+ Add a new state for eventscripts : DISABLED.
Add two new commands \"ctdb enablescript/disablescript\" to enable/disable
eventscripts at runtime.
+ Bugfixes for TDB from rusty.
+ Merge/Port changes from upstream TDB library by rusty.
+ Additional new tests from MartinS. Tests for stop/continue.
+ Initial patch to rework vacuuming/repacking process from Wolfgang Mueller.
+ Updates from Michael Adam for persistent writes.
+ Updates from MartinS to handle the new STOPPED bit in the test framework.
+ Make it possible to enable/disable the RECMASTER and LMASTER roles
at runtime. Add two new commands
\"ctdb setlmasterrole/setrecmasterrole on/off\"
+ Make it possible to enable/disable the natgw feature at runtime. Add
the command \"ctdb setnatgwstate on/off\"
- Version 1.0.87
+ Add a new event \"stopped\" that is called when a node is stopped.
+ Documentation of the STOPPED flag and the stop/continue commands
+ Make it possible to start a node in STOPPED mode.
+ Add a new node flag : STOPPED and commands \"ctdb stop\" \"ctdb continue\"
These commands are similar to \"diasble/enable\" but will also remove the
node from the vnnmap, while disable only fails all ip addresses over.
+ tests for NFS , CIFS by martins
+ major updates to the init script by martins
+ Send gratious arps with a 1.1 second stride instead of a 1 second stride
to workaround interesting \"features\" of common linux stacks.
+ Various test enhancements from martins:
- additional other tests
- add tests for grat arp generation, ping during failover, ssh and failover
- New/updated tcp tickle tests and supprot functions
- provide better debugging when a test fails
- make ctdbd restarts more reliable in the tests
- update the \"wait bar\" to make the wait progress in tests more obvious
- various cleanups
+ when dispatching a message to a handler, make the message a real talloc
object so that we can reparent the object in the tallic hierarchy.
+ document the ipreallocate command
+ Updates to enable/disable to use the ipreallocate command to block until
the following ipreallocation has completed.
+ Update the main daemon and the tools to allow debug level to be a string
instead of an integer.
+ Update the sysconfig file to show using string literals instead of numeric
values for the debuglevels used.
+ If no debuglevel is specific, make \"ctdb setdebug\" show the available
options.
+ When trying to allocate network packets, add explicit checks if the network
transport has been shutdown before trying and failing, to make log messages
easier to read. Add this extra check and logging to every plave packets are
allocated.
- Version 1.0.86
+ Do not access the reclock at all if VerifyRecoveryLock is zero, not even
try to probe it.
+ Allow setting the reclock file as \"\", which means that no reclock file at
all should be used.
+ Document that a reclock file is no longer required, but that it is
dangerous.
+ Add a control that can be used to set/clear/change the reclock file in the
daemon during runtime.
+ Update the recovery daemon to poll whether a reclock file should be sued
and if so which file at runtime in each monitoring cycle.
+ Automatically disable VerifyRecoveryLock everytime a user changes the
location of the reclock file.
+ do not allow the VerifyRecoveryLock to be set using ctdb setvar if there is
no recovery lock file specified.
+ Add two commands \"ctdb getreclock\" and \"ctdb setreclock\" to modify the
reclock file.
- Version 1.0.85
+ From William Jojo : Dont use getopt on AIX
+ Make it possible to use \"ctdb listnodes\" also when the daemon is not running
+ Provide machinereadable output to \"ctdb listnodes\"
+ Dont list DELETED nodes in the ctdb listnodes output
+ Try to avoid causing a recovery for the average case when
adding/deleting/moving an ip
+ When banning a node, drop the IPs on that node only and not all nodes.
+ Add tests for NFS and CIFS tickles
+ Rename 99.routing to 11.routing so it executes before NFS and LVS scripts
+ Increase the default timeout before we deem an unresponsive recovery daemon
hung and shutdown
+ Reduce the reclock timout to 5 seconds
+ Spawn a child process in the recovery daemon ot check the reclock file to
avoid blocking the process if the underlying filesystem is unresponsive
+ fix for filedescriptor leak when a child process timesout
+ Dont log errors if waitpid() returns -1
+ Onnode updates by Martins
+ Test and initscript cleanups from Martin S
- Version 1.0.84
+ Fix a bug in onnode that could not handle dead nodes
- Version 1.0.83
+ Document how to remove a ndoe from a running cluster.
+ Hide all deleted nodes from ctdb output.
+ Lower the loglevel on some eventscript related items
+ Dont queue packets to deleted nodes
+ When building initial vnnmap, ignode any nonexisting nodes
+ Add a new nodestate : DELETED that is used when deleting a node from an
existing cluster.
+ dont remove the ctdb socket when shutting down. This prevents a race in the
initscripts when restarting ctdb quickly after stopping it.
+ TDB nesting reworked.
+ Remove obsolete ipmux
+ From Flavio Carmo Junior: Add eventscript and documentation for ClamAV
antivirus engine
+ From Sumit Bose: fix the regex in the test to handle the new ctdb
statistics output that was recently added.
+ change the socket type we use for grauitious arps from the obsolete
AF_INET/SOCK_PACKET to instead use PF_PACKET/SOCK_RAW.
+ Check return codes for some functions, from Sumit Bose, based on codereview
by Jim Meyering.
+ Sumit Bose: Remove structure memeber node_list_file that is no longer used.
+ Sumit Bose: fix configure warning for netfilter.h
+ Updates to the webpages by Volker.
+ Remove error messages about missing /var/log/log.ctdb file from
ctdb_diagnostics.sh from christian Ambach
+ Additional error logs if hte eventscript switching from dameon to client
mode fails.
+ track how long it takes for ctdbd and the recovery daemon to perform the
rec-lock fcntl() lock attemt and show this in the ctdb statistics output.
- Version 1.0.82
+ Update the \"ctdb lvsmaster\" command to return -1 on error.
+ Add a -Y flag to \"ctdb lvsmaster\"
+ RHEL5 apache leaks semaphores when crashing. Add semaphore cleanup to the
41.httpd eventscript and try to restart apache when it has crashed.
+ Fixes to some tests
+ Add a -o option to \"onnode\" which will redirect all stdout to a file for
each of the nodes.
+ Add a natgw and a lvs node specifier to onnode so that we can use
\"onnode natgw ...\"
+ Assign the natgw address to lo instead of the private network so it can also
be used where private and public networks are the same.
+ Add GPL boilerplates to two missing scripts.
+ Change the natgw prefix NATGW_ to CTDB_NATGW_
- Version 1.0.81
+ use smbstatus -np instead of smbstatus -n in the 50.samba eventscript
since this avoids performing an expensive traverse on the locking and brlock
databases.
+ make ctdb automatically terminate all traverse child processes clusterwide
associated to a client application that terminates before the traversal is
completed.
+ From Sumit Bose : fixes to AC_INIT handling.
+ From Michael Adam, add Tridge\'s \"ping_pong\" tool the the ctdb distro since
this is very useful for testing the backend filesystem.
+ From Sumit bose, add support for additional 64 bit platforms.
+ Add a link from the webpage to Michael Adams SambaXP paper on CTDB.
- Version 1.0.80
+ change init shutdown level to 01 for ctdb so it stops before any of the
other services
+ if we can not pull a database from a remote node during recovery, mark that
node as a culprit so it becomes banned
+ increase the loglevel when we volunteer to drop all ip addresses after
beeing in recovery mode for too long. Make this timeout tuneable with
\"RecoveryDropAllIPs\" and have it default to 60 seconds
+ Add a new flag TDB_NO_NESTING to the tdb layer to prevent nested
transactions which ctdb does not use and does not expect. Have ctdb set
this flag to prevent nested transactions from occuring.
+ dont unconditionally kill off ctdb and restrat it on \"service ctdb start\".
Fail \"service ctdb start\" with an error if ctdb is already running.
+ Add a new tunable \"VerifyRecoveryLock\" that can be set to 0 to prevent the
main ctdb daemon to verify that the recovery master has locked the reclock
file correctly before allowing it to set the recovery mode to active.
+ fix a cosmetic bug with ctdb statistics where certain counters could become
negative.

Mon Jun 15 14:00:00 2009 lmuelleAATTsuse.de
- Remove description, type, default and comment next to the ulimit example.

Mon Jun 15 14:00:00 2009 lmuelleAATTsuse.de
- Add missing service descriptions for SUSE based systems.
- Remove leading # from CTDB_MANAGES_NFS setting and add a description.

Wed Jun 10 14:00:00 2009 lmuelleAATTsuse.de
- Add modified sysconfig file for SUSE based systems.
- Add default log, /var/log/ctdb and lib, /var/lib/ctdb directories.

Tue Jun 9 14:00:00 2009 roAATTsuse.de
- fix lib64 for ppc64 and s390x (really should never be hardcoded
in configure.ac ...)

Tue May 19 14:00:00 2009 lmuelleAATTsuse.de
- Call %fillup_and_insserv for SUSE based systems from %post.

Thu May 7 14:00:00 2009 lmuelleAATTsuse.de
- Package man page files independent of the used compression method (gz,lzma).

Thu May 7 14:00:00 2009 lmuelleAATTsuse.de
- Update to version 1.0.79 based on the upstream spec file.
+ From Mathieu Parent: add a ctdb pkgconfig file
+ Fix bug 6250
+ add a funciton remove_ip to safely remove an ip from an interface, taking
care to workaround an issue with linux alias interfaces.
+ Update the natgw eventscript to use the safe remove_ip() function
+ fix a bug in the eventscript child process that would cause the socket to
be removed.
+ dont verify nodemap on banned nodes during cluster monitoring
+ Update the dodgy SeqnumInterval to have ms resolution

Wed Apr 8 14:00:00 2009 sambaAATTsamba.org
- Version 1.0.79
+ From Mathieu Parent: add a ctdb pkgconfig file
+ Fix bug 6250
+ add a funciton remove_ip to safely remove an ip from an interface, taking
care to workaround an issue with linux alias interfaces.
+ Update the natgw eventscript to use the safe remove_ip() function
+ fix a bug in the eventscript child process that would cause the socket to
be removed.
+ dont verify nodemap on banned nodes during cluster monitoring
+ Update the dodgy SeqnumInterval to have ms resolution

Tue Mar 31 14:00:00 2009 sambaAATTsamba.org
- Version 1.0.78
+ Add a notify mechanism so we can send snmptraps/email to external
management systems when the node becomes unhealthy
+ include 11.natgw eventscript in thew install so that the NATGW feature works

Tue Mar 31 14:00:00 2009 sambaAATTsamba.org
- Version 1.0.77
+ Update the 99.routing eventscript to also try to add the routes (back)
during a releaseip event. Similar to the reasons why we must add addresses
back during releaseip in 10.interfaces

Tue Mar 24 13:00:00 2009 sambaAATTsamba.org
- Version 1.0.76
+ Add a debugging command \"xpnn\" which can print the pnn of the node even
when ctdbd is not running.
+ Redo the NATGW implementation to allow multiple disjoing NATGW groups in
the same cluster.

Tue Mar 24 13:00:00 2009 sambaAATTsamba.org
- Version 1.0.75
+ Various updates to LVS
+ Fix a bug in the killtcp control where we did not set the port correctly
+ add a new \"ctdb scriptstatus\" command that shows the status of the
eventrscripts.

Mon Mar 16 13:00:00 2009 sambaAATTsamba.org
- Version 1.0.74
+ Fixes to AIX from C Cowan.
+ Fixes to ctdb_diagnostics so we collect correct GPFS data
+ Fixes to the net conf list command in ctdb_diagnostics
+ Check the static-routes file IFF it exists in ctdb_diagnostics

Tue Mar 10 13:00:00 2009 lmuelleAATTsuse.de
- Initial SUSE ctdb package of version 1.0.70 based on the upstream spec file.

Wed Mar 4 13:00:00 2009 sambaAATTsamba.org
- Version 1.0.73
+ Add possibility to disable the check of shares for NFS and Samba
+ From Sumit Bose, fix dependencies so make -j works