Changelog for wpa_supplicant-0.7.3-10.3.test.2.x86_64.rpm :

* Tue Nov 15 2011 glinAATTsuse.com- Add wpa_supplicant-add-ca-dbus-signal.patch to emit D-Bus signal when receiving a RADIUS server certificate. (bnc#574266)
* Mon Oct 10 2011 lnusselAATTsuse.de- use same exec line in fi.w1.wpa_supplicant1.service as in fi.epitest.hostap.WPASupplicant.service- fix build on older distros- fix not using RPM_OPT_FLAGS- use %_smp_mflags
* Fri Sep 16 2011 jengelhAATTmedozas.de- Select libnl-1_1-devel
* Wed Aug 31 2011 vbotkaAATTsuse.de- %ghost directive for /var/run/wpa_supplicant added for tmpfs (bnc 710281)
* Wed Mar 16 2011 dimstarAATTopensuse.org- Add wpa_supplicant-dbus-events.patch: Emit property changed events when adding/removing BSSes. Required by NetworkManager 0.9 beta1 and later.- Also install fi.w1.wpa_supplicant1.service, which was added as source5, sourced from the wpa_supplicant source code, with modified exec line pointing to /usr/sbin instead of /sbin.
* Tue Sep 07 2010 vbotkaAATTsuse.de- update to 0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows installer update to 0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results
* add TLS client events and server probing to ease design of automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS)
* add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan=\"simple:30:-45:300\" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no enabled networks
* Fri May 28 2010 vbotkaAATTsuse.de- Fix fallback from failed PMKSA caching into full EAP authentication (bnc 601501)
* Sun Jan 31 2010 ajAATTsuse.de- Update to 0.7.1 (full changelog in wpa_supplicant/ChangeLog):
* Cleanup of interfaces
* dbus: added new DBus interface (fi.w1.wpa_supplicant1)
* driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality- Remove wpa_supplicant-dbus-iface-segfault-fix.patch, does not apply at all.- Remove wpa_supplicant-dbus-reset-eapol.patch (merged upstream).- Disable patches that do not apply anymore but are not merged.
* Mon Sep 28 2009 lnusselAATTsuse.de- simplify dbus config, allow introspection
* Mon Sep 07 2009 claes.backstromAATTfsfe.org- Added rotation of log file with logrotate (bnc#508041)
* Tue May 12 2009 dmuellerAATTsuse.de- reenable logfile writing support to make d-bus activation work again (bnc#502957)
* Tue Apr 07 2009 hschaaAATTsuse.de- Enable ralink driver (bnc#481380)- Enable nl80211 driver (bnc#485453)- Rebase all SUSE patches to 0.6.9- Remove upstreamed patches- Update to 0.6.9
* driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303]
* increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G)
* fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes)
* added support for Wi-Fi Protected Setup (WPS) (wpa_supplicant can now be configured to act as a WPS Enrollee to enroll credentials for a network using PIN and PBC methods; in addition, wpa_supplicant can act as a wireless WPS Registrar to configure an AP); WPS support can be enabled by adding CONFIG_WPS=y into .config and setting the runtime configuration variables in wpa_supplicant.conf (see WPS section in the example configuration file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to manage WPS negotiation; see README-WPS for more details
* added support for EAP-AKA\' (draft-arkko-eap-aka-kdf)
* added support for using driver_test over UDP socket
* fixed PEAPv0 Cryptobinding interoperability issue with Windows Server 2008 NPS; optional cryptobinding is now enabled (again) by default
* fixed PSK editing in wpa_gui
* changed EAP-GPSK to use the IANA assigned EAP method type 51
* added a Windows installer that includes WinPcap and all the needed DLLs; in addition, it set up the registry automatically so that user will only need start wpa_gui to get prompted to start the wpasvc servide and add a new interface if needed through wpa_gui dialog
* updated management frame protection to use IEEE 802.11w/D7.0
* added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA (can be used to simulate test SIM/USIM card with a known private key; enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config and password=\"Ki:OPc\"/password=\"Ki:OPc:SQN\" in network configuration)
* added a new network configuration option, wpa_ptk_rekey, that can be used to enforce frequent PTK rekeying, e.g., to mitigate some attacks against TKIP deficiencies
* added an optional mitigation mechanism for certain attacks against TKIP by delaying Michael MIC error reports by a random amount of time between 0 and 60 seconds; this can be enabled with a build option CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config
* fixed EAP-AKA to use RES Length field in AT_RES as length in bits, not bytes
* updated OpenSSL code for EAP-FAST to use an updated version of the session ticket overriding API that was included into the upstream OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is needed with that version anymore)
* updated userspace MLME instructions to match with the current Linux mac80211 implementation; please also note that this can only be used with driver_nl80211.c (the old code from driver_wext.c was removed)
* added support (Linux only) for RoboSwitch chipsets (often found in consumer grade routers); driver interface \'roboswitch\'
* fixed canceling of PMKSA caching when using drivers that generate RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know about
* added support for SHA-256 as X.509 certificate digest when using the internal X.509/TLSv1 implementation
* updated management frame protection to use IEEE 802.11w/D6.0
* added support for using SHA256-based stronger key derivation for WPA2 (IEEE 802.11w)
* fixed FT (IEEE 802.11r) authentication after a failed association to use correct FTIE
* added support for configuring Phase 2 (inner/tunneled) authentication method with wpa_gui-qt4
* added support for EAP Sequences in EAP-FAST Phase 2
* added support for using TNC with EAP-FAST
* added driver_ps3 for the PS3 Linux wireless driver
* added support for optional cryptobinding with PEAPv0
* fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to allow fallback to full handshake if server rejects PAC-Opaque
* added fragmentation support for EAP-TNC
* added support for parsing PKCS #8 formatted private keys into the internal TLS implementation (both PKCS #1 RSA key and PKCS #8 encapsulated RSA key can now be used)
* added option of using faster, but larger, routines in the internal LibTomMath (for internal TLS implementation) to speed up DH and RSA calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
* fixed race condition between disassociation event and group key handshake to avoid getting stuck in incorrect state [Bug 261]
* fixed opportunistic key caching (proactive_key_caching)
* Sun Mar 01 2009 cooloAATTsuse.de- fix compilation with gcc 4.4