Changelog for bind-utils-9.9.2P2-49.1.x86_64.rpm :
Wed Aug 7 14:00:00 2013 maxAATTsuse.com
- Update to 9.9.3P2 fixes CVE-2013-4854, bnc#831899.

* Incorrect bounds checking on private type \'keydata\' can lead
to a remotely triggerable REQUIRE failure.

Tue Mar 26 13:00:00 2013 lmuelleAATTsuse.com
- Updated to 9.9.2-P2
Security Fixes
Removed the check for regex.h in configure in order to disable
regex syntax checking, as it exposes BIND to a critical flaw in
libregex on some platforms. [CVE-2013-2266] [RT #32688]
https://kb.isc.org/article/AA-00871 (bnc#811876)
Prevents named from aborting with a require assertion failure
on servers with DNS64 enabled. These crashes might occur as a
result of specific queries that are received. (Note that this
fix is a subset of a series of updates that will be included in
full in BIND 9.8.5 and 9.9.3 as change #3388, RT #30996).
[CVE-2012-5688] [RT #30792]
A deliberately constructed combination of records could cause
named to hang while populating the additional section of a
response. [CVE-2012-5166] [RT #31090]
Prevents a named assert (crash) when queried for a record whose
RDATA exceeds 65535 bytes. [CVE-2012-4244] [RT #30416]
Prevents a named assert (crash) when validating caused by using
\"Bad cache\" data before it has been initialized. [CVE-2012-3817]
[RT #30025]
A condition has been corrected where improper handling of
zero-length RDATA could cause undesirable behavior, including
termination of the named process. [CVE-2012-1667] [RT #29644]
ISC_QUEUE handling for recursive clients was updated to address
a race condition that could cause a memory leak. This rarely
occurred with UDP clients, but could be a significant problem
for a server handling a steady rate of TCP queries. [CVE-2012-3868]
[RT #29539 & #30233]
New Features
Elliptic Curve Digital Signature Algorithm keys and signatures
in DNSSEC are now supported per RFC 6605. [RT #21918]
Introduces a new tool \"dnssec-checkds\" command that checks a
zone to determine which DS records should be published in the
parent zone, or which DLV records should be published in a DLV
zone, and queries the DNS to ensure that it exists. (Note: This
tool depends on python; it will not be built or installed on
systems that do not have a python interpreter.) [RT #28099]
Introduces a new tool \"dnssec-verify\" that validates a signed
zone, checking for the correctness of signatures and NSEC/NSEC3
chains. [RT #23673]
Adds configuration option \"max-rsa-exponent-size ;\" that
can be used to specify the maximum rsa exponent size that will
be accepted when validating [RT #29228]
Feature Changes
Improves OpenSSL error logging [RT #29932]
nslookup now returns a nonzero exit code when it is unable to
get an answer. [RT #29492]
Bug Fixes
When using DNSSEC inline signing with \"rndc signing -nsec3param\",
a salt value of \"-\" can now be used to indicate \'no salt\'. [RT #30099]
Prevents race conditions (address use after free) that could be
encountered when named is shutting down and releasing structures
used to manage recursive clients. [RT #30241]
Static-stub zones now accept \"forward\" and \"fowarders\" options
(often needed for subdomains of the zone referenced to override
global forwarding options). These options are already available
with traditional stub zones and their omission from zones of
type \"static-stub\" was an inadvertent oversight. [RT #30482]
Limits the TTL of signed RRsets in cache when their RRSIGs are
approaching expiry. This prevents the persistence in cache of
invalid RRSIGs in order to assist recovery from a situation where
zone re-signing doesn\'t occur in a timely manner. With this
change, named will attempt to obtain new RRSIGs from the
authoritative server once the original ones have expired, and
even if the TTL of the old records would in other circumstances
cause them to be kept in cache for longer. [RT #26429]
Corrects the syntax of isc_atomic_xadd() and isc_atomic_cmpxchg()
which are employed on Itanium systems to speed up lock management
by making use of atomic operations. Without the syntax correction
it is possible that concurrent access to the same structures
could accidentally occur with unpredictable results. [RT #25181]
Improves OpenSSL error logging [RT #29932]
The configure script now supports and detects libxml2-2.8.x
correctly [RT #30440]
The host command should no longer assert on some architectures
and builds while handling the time values used with the -w (wait
forever) option. [RT #18723]
Invalid zero settings for max-retry-time, min-retry-time,
max-refresh-time, min-refresh-time will now be detected during
parsing of named.conf and an error emitted instead of triggering
an assertion failure on startup. [RT #27730]
Removes spurious newlines from log messages in zone.c [RT #30675]
When built with readline support (i.e. on a system with readline
installed) nsupdate no longer terminates unexpectedly in interactive
mode. [RT #29550]
All named tasks that perform task-exclusive operations now share
the same single task. Prior to this change, there was the
possibility of a race condition between rndc operations and other
functions such as re-sizing the adb hash table. If the race
condition was encountered, named would in most cases terminate
unexpectedly with an assert. [RT #29872]
Ensures that servers are expired from the ADB cache when the
timeout limit is reached so that their learned attributes can
be refreshed. Prior to this change, servers that were frequently
queried might never have their entries removed and reinitialized.
This is of particular importance to DNSSEC-validating recursive
servers that might erroneously set \"no-edns\" for an authoritative
server following a period of intermittent connectivity. [RT
[#29856]]
Adds additional resilience to a previous security change (3218)
by preventing RRSIG data from being added to cache when a
pseudo-record matching the covering type and proving non-existence
exists at a higher trust level. The earlier change prevented
this inconsistent data from being retrieved from cache in response
to client queries - with this additional change, the RRSIG
records are no longer inserted into cache at all. [RT #26809]
dnssec-settime will now issue a warning when the writing of a
new private key file would cause a change in the permissions of
the existing file. [RT #27724]
Fixes the defect introduced by change #3314 that was causing
failures when saving stub zones to disk (resulting in excessive
CPU usage in some cases). [RT #29952]
Address race condition in units tests: asyncload_zone and
asyncload_zt. [RT #26100]
It is now possible to using multiple control keys again - this
functionality was inadvertently broken by change #3924 (RT #28265)
which addressed a memory leak. [RT #29694]
Named now holds a zone table reference while performing an
asynchronous load of a zone. This removes a race condition that
could cause named to crash when zones are added using rndc addzone
or by manually editing named\'s configuration file followed by
rndc reconfig/reload. [RT #28326]
Setting resolver-query-timeout too low could cause named problems
recovering after a loss of connectivity. [RT #29623]
Reduces the potential build-up of stale RRsets in cache on a
busy recursive nameserver by re-using cached DS and RRSIG rrsets
when possible [RT #29446]
Corrects a failure to authenticate non-existence of resource
records in some circumstances when RPZ has been configured.
Also:
- adds an optional \"recursive-only yes|no\" to the response-policy
statement
- adds an optional \"max-policy-ttl\" to the response-policy
statement to limit the false data that \"recursive-only no\"
can introduce into resolvers\' caches
- introduces a predefined encoding of PASSTHRU policy by adding
\"rpz-passthru\" to be used as the target of CNAME policy records
(the old encoding is still accepted.)
- adds a RPZ performance test to bin/tests/system/rpz when
queryperf is available.
[RT #26172]
Upper-case/lower-case handling of RRSIG signer-names is now
handled consistently: RRSIG records are generated with the
signer-name in lower case. They are accepted with any case, but
if they fail to validate, we try again in lower case. [RT #27451]

Tue Mar 26 13:00:00 2013 lmuelleAATTsuse.com
- Update the IPv4 address of the D root name server.

Thu Dec 6 13:00:00 2012 meissnerAATTsuse.com
- Updated to 9.9.2-P1 (bnc#792926)
https://kb.isc.org/article/AA-00828

* Security Fixes
Prevents named from aborting with a require assertion failure on
servers with DNS64 enabled. These crashes might occur as a result of
specific queries that are received. (Note that this fix is a subset
of a series of updates that will be included in full in BIND 9.8.5
and 9.9.3 as change #3388, RT #30996). [CVE-2012-5688] [RT #30792]
A deliberately constructed combination of records could cause
named to hang while populating the additional section of a
response. [CVE-2012-5166] [RT #31090]
Prevents a named assert (crash) when queried for a record whose
RDATA exceeds 65535 bytes. [CVE-2012-4244] [RT #30416]
Prevents a named assert (crash) when validating caused by using
\"Bad cache\" data before it has been initialized. [CVE-2012-3817]
[RT #30025]
A condition has been corrected where improper handling of zero-length
RDATA could cause undesirable behavior, including termination of
the named process. [CVE-2012-1667] [RT #29644]
ISC_QUEUE handling for recursive clients was updated to address a race
condition that could cause a memory leak. This rarely occurred with
UDP clients, but could be a significant problem for a server handling
a steady rate of TCP queries. [CVE-2012-3868] [RT #29539 & #30233]
New Features
Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]
Introduces a new tool \"dnssec-checkds\" command that checks a zone to
determine which DS records should be published in the parent zone,
or which DLV records should be published in a DLV zone, and queries
the DNS to ensure that it exists. (Note: This tool depends on python;
it will not be built or installed on systems that do not have a
python interpreter.) [RT #28099]
Introduces a new tool \"dnssec-verify\" that validates a signed zone,
checking for the correctness of signatures and NSEC/NSEC3 chains.
[RT #23673]
Adds configuration option \"max-rsa-exponent-size ;\" that
can be used to specify the maximum rsa exponent size that will be
accepted when validating [RT #29228]
Feature Changes
Improves OpenSSL error logging [RT #29932]
nslookup now returns a nonzero exit code when it is unable to get
an answer. [RT #29492]
Bug Fixes
Uses binary mode to open raw files on Windows. [RT #30944]
When using DNSSEC inline signing with \"rndc signing -nsec3param\", a
salt value of \"-\" can now be used to indicate \'no salt\'. [RT #30099]
Prevents race conditions (address use after free) that could be
encountered when named is shutting down and releasing structures
used to manage recursive clients. [RT #30241]
Static-stub zones now accept \"forward\" and \"fowarders\" options
(often needed for subdomains of the zone referenced to override
global forwarding options). These options are already available
with traditional stub zones and their omission from zones of type
\"static-stub\" was an inadvertent oversight. [RT #30482]
Limits the TTL of signed RRsets in cache when their RRSIGs are
approaching expiry. This prevents the persistence in cache of
invalid RRSIGs in order to assist recovery from a situation where
zone re-signing doesn\'t occur in a timely manner. With this change,
named will attempt to obtain new RRSIGs from the authoritative server
once the original ones have expired, and even if the TTL of the old
records would in other circumstances cause them to be kept in cache
for longer. [RT #26429]
Corrects the syntax of isc_atomic_xadd() and isc_atomic_cmpxchg()
which are employed on Itanium systems to speed up lock management
by making use of atomic operations. Without the syntax correction
it is possible that concurrent access to the same structures could
accidentally occur with unpredictable results. [RT #25181]
Improves OpenSSL error logging [RT #29932]
The configure script now supports and detects libxml2-2.8.x correctly
[RT #30440]
The host command should no longer assert on some architectures
and builds while handling the time values used with the -w (wait
forever) option. [RT #18723]
Invalid zero settings for max-retry-time, min-retry-time,
max-refresh-time, min-refresh-time will now be detected during parsing
of named.conf and an error emitted instead of triggering an assertion
failure on startup. [RT #27730]
Removes spurious newlines from log messages in zone.c [RT #30675]
When built with readline support (i.e. on a system with readline
installed) nsupdate no longer terminates unexpectedly in interactive
mode. [RT #29550]
All named tasks that perform task-exclusive operations now share the
same single task. Prior to this change, there was the possibility of
a race condition between rndc operations and other functions such as
re-sizing the adb hash table. If the race condition was encountered,
named would in most cases terminate unexpectedly with an assert.
[RT #29872]
Ensures that servers are expired from the ADB cache when the timeout
limit is reached so that their learned attributes can be refreshed.
Prior to this change, servers that were frequently queried might
never have their entries removed and reinitialized. This is of
particular importance to DNSSEC-validating recursive servers that
might erroneously set \"no-edns\" for an authoritative server following
a period of intermittent connectivity. [RT #29856]
Adds additional resilience to a previous security change (3218) by
preventing RRSIG data from being added to cache when a pseudo-record
matching the covering type and proving non-existence exists at a
higher trust level. The earlier change prevented this inconsistent
data from being retrieved from cache in response to client queries -
with this additional change, the RRSIG records are no longer inserted
into cache at all. [RT #26809]
dnssec-settime will now issue a warning when the writing of a new
private key file would cause a change in the permissions of the
existing file. [RT #27724]
Fixes the defect introduced by change #3314 that was causing failures
when saving stub zones to disk (resulting in excessive CPU usage in
some cases). [RT #29952]
Address race condition in units tests: asyncload_zone and
asyncload_zt. [RT #26100]
It is now possible to using multiple control keys again - this
functionality was inadvertently broken by change #3924 (RT #28265)
which addressed a memory leak. [RT #29694]
Named now holds a zone table reference while performing an
asynchronous load of a zone. This removes a race condition that
could cause named to crash when zones are added using rndc addzone
or by manually editing named\'s configuration file followed by rndc
reconfig/reload. [RT #28326]
Setting resolver-query-timeout too low could cause named problems
recovering after a loss of connectivity. [RT #29623]
Reduces the potential build-up of stale RRsets in cache on a busy
recursive nameserver by re-using cached DS and RRSIG rrsets when
possible [RT #29446]
Corrects a failure to authenticate non-existence of resource records
in some circumstances when RPZ has been configured. Also:
adds an optional \"recursive-only yes|no\" to the response-policy
statement
adds an optional \"max-policy-ttl\" to the response-policy statement
to limit the false data that \"recursive-only no\" can introduce
into resolvers\' caches
introduces a predefined encoding of PASSTHRU policy by adding
\"rpz-passthru\" to be used as the target of CNAME policy records
(the old encoding is still accepted.)
adds a RPZ performance test to bin/tests/system/rpz when queryperf is available. [RT #26172]
Upper-case/lower-case handling of RRSIG signer-names is now handled
consistently: RRSIG records are generated with the signer-name in
lower case. They are accepted with any case, but if they fail to
validate, we try again in lower case. [RT #27451]

Sun Nov 18 13:00:00 2012 meissnerAATTsuse.com
- added a ratelimiting (draft RFC) patch from Paul Vixie.
see http://www.redbarn.org/dns/ratelimits
suggested by Stefan Schaefer

Wed Nov 14 13:00:00 2012 meissnerAATTsuse.com
- updated to 9.9.2
https://kb.isc.org/article/AA-00798
Security:

* A deliberately constructed combination of records could cause
named to hang while populating the additional section of a
response. [CVE-2012-5166] [RT #31090]

* Prevents a named assert (crash) when queried for a record whose
RDATA exceeds 65535 bytes. [CVE-2012-4244] [RT #30416]

* Prevents a named assert (crash) when validating caused by using \"Bad
cache\" data before it has been initialized. [CVE-2012-3817] [RT #30025]

* A condition has been corrected where improper handling of zero-length
RDATA could cause undesirable behavior, including termination of the
named process. [CVE-2012-1667] [RT #29644]

* ISC_QUEUE handling for recursive clients was updated to address a race
condition that could cause a memory leak. This rarely occurred with
UDP clients, but could be a significant problem for a server handling
a steady rate of TCP queries. [CVE-2012-3868] [RT #29539 & #30233]
New Features

* Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]

* Introduces a new tool \"dnssec-checkds\" command that checks a zone
to determine which DS records should be published in the parent zone,
or which DLV records should be published in a DLV zone, and queries
the DNS to ensure that it exists. (Note: This tool depends on python;
it will not be built or installed on systems that do not have a python
interpreter.) [RT #28099]

* Introduces a new tool \"dnssec-verify\" that validates a signed zone,
checking for the correctness of signatures and NSEC/NSEC3 chains.
[RT #23673]

* Adds configuration option \"max-rsa-exponent-size ;\" that can
be used to specify the maximum rsa exponent size that will be accepted
when validating [RT #29228]
Feature Changes

* Improves OpenSSL error logging [RT #29932]

* nslookup now returns a nonzero exit code when it is unable to get an answer. [RT #29492]
Lots of bugfixes.
- unfuzzed patches:
perl-path.diff
pie_compile.diff
workaround-compile-problem.diff

Fri Oct 19 14:00:00 2012 meissnerAATTsuse.com
- Specially crafted DNS data can cause a lockup in named.
CVE-2012-5166, bnc#784602.
- 9.9.1-P4

Sat Sep 15 14:00:00 2012 meissnerAATTsuse.com
- Named could die on specially crafted record.
[RT #30416] (bnc#780157) CVE-2012-4244
- 9.9.1-P3
- updated dnszone-schema.txt from upstream.

Thu Jul 26 14:00:00 2012 ugAATTsuse.de
- Prevents a named assert (crash) when validating caused by using
\"Bad cache\" data before it has been initialized. [RT #30025]
(bnc#772945)
- ISC_QUEUE handling for recursive clients was updated to address a
race condition that could cause a memory leak. This rarely occurred
with UDP clients, but could be a significant problem for a server
handling a steady rate of TCP queries. [RT #29539 & #30233]
- Under heavy incoming TCP query loads named could experience a
memory leak which could lead to significant reductions in query
response or cause the server to be terminated on systems with
\"out of memory\" killers. [RT #29539]
(bnc#772946)
- A condition has been corrected where improper handling of zero-length
RDATA could cause undesirable behavior, including termination of
the named process. [RT #29644]
- 9.9.1-P2

Thu Jul 12 14:00:00 2012 cfarrellAATTsuse.com
- license update: ISC
ISC is generally seen as the correct license for bind

Tue Jun 5 14:00:00 2012 ugAATTsuse.de
- updated dnszone-schema.txt

Mon Jun 4 14:00:00 2012 ugAATTsuse.de
- VUL-0: bind remote DoS via zero length rdata field
CVE-2012-1667
bnc#765315
- 9.9.1-P1

Tue May 22 14:00:00 2012 ugAATTsuse.de
- this version has no new features but only bugfixes
- Addresses a race condition that can cause named to to crash when
the masters list for a zone is updated via rndc reload/reconfig
- Fixes a race condition in zone.c that can cause named to crash
during the processing of rndc delzone
- Prevents a named segfault from resolver.c due to procedure
fctx_finddone() not being thread-safe
- SDB now handles unexpected errors from back-end database drivers
gracefully instead of exiting on an assert.
- Prevents named crashes as a result of dereferencing a NULL pointer
in zmgr_start_xfrin_ifquota if the zone was being removed while
there were zone transfers still pending
- Corrects a parser bug that could cause named to crash while
reading a malformed zone file
- many more smaller fixes
- version 9.9.1

Thu May 10 14:00:00 2012 ugAATTsuse.de
- added patch to fix an assertion failure

Fri May 4 14:00:00 2012 ugAATTsuse.de
- many dnssec fixes and features (too many to list them
here, check the changelog)
- improved startup time
- improved scalability
- Added support for Uniform Resource Identifier (URI) resource
records
- Local copies of slave zones are now saved in raw format by
default to improve startup performance
BIND 9.9 changes the default storage format for slave zone
files from text to raw. Because named\'s behavior when a slave
server cannot read or parse a zone file is to move the offending
file out of the way and retransfer the zone, slave servers
that are updated from a pre-9.9.0 version of BIND and which
have existing copies of slave zone data may wind up with
extraneous copies of zone data stored, as the existing
text-format zone file copies will be moved aside to filenames
of the format db-###### and journal files to the format
jn-###### (where # represents a hexadecimal digit.)
- many many bugfixes. Please read changelog for details
- fixed handling of TXT records in ldapdump
(bnc#743758)
- 9.9.0

Mon Feb 13 13:00:00 2012 cooloAATTsuse.com
- patch license to follow spdx.org standard

Wed Dec 21 13:00:00 2011 larsAATTsamba.org
- Ensure to create the required dir or sym link in /var/run; (bnc#738156).

Mon Dec 5 13:00:00 2011 ugAATTsuse.de
- root nameserver updated (root.hint file)

Mon Dec 5 13:00:00 2011 ugAATTsuse.de
- added managed-keys-directory to named.conf

Tue Nov 22 13:00:00 2011 ugAATTsuse.de
- fixed apparmor profile for lib and lib64 in chroot
(bnc#716745)

Thu Nov 17 13:00:00 2011 fteodoriAATTsuse.de
- Cache lookup could return RRSIG data associated with nonexistent
records, leading to an assertion failure. CVE-2011-4313; (bnc#730995).

Wed Oct 26 14:00:00 2011 ugAATTsuse.de
- on a 64bit system a chrooted bind failed to start if 32bit
libs were installed (bnc#716745)

Fri Sep 30 14:00:00 2011 cooloAATTsuse.com
- add libtool as buildrequire to make the spec file more reliable

Sat Sep 17 14:00:00 2011 jengelhAATTmedozas.de
- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build

Fri Sep 16 14:00:00 2011 ugAATTsuse.de
- very first restart can create broken chroot
(bnc#718441)

Mon Sep 5 14:00:00 2011 ugAATTsuse.de

* fixed SSL in chroot environment (bnc#715881)

Mon Sep 5 14:00:00 2011 ugAATTsuse.de

* Added a new include file with function typedefs for the DLZ
\"dlopen\" driver. [RT #23629]

* Added a tool able to generate malformed packets to allow testing of
how named handles them. [RT #24096]

* The root key is now provided in the file bind.keys allowing DNSSEC
validation to be switched on at start up by adding
\"dnssec-validation auto;\" to named.conf. If the root key provided
has expired, named will log the expiration and validation will not
work. More information and the most current copy of bind.keys can
be found at http://www.isc.org/bind-keys.
*Please note this feature
was actually added in 9.8.0 but was not included in the 9.8.0
release notes. [RT #21727]

* If named is configured with a response policy zone (RPZ) and a
query of type RRSIG is received for a name configured for RRset
replacement in that RPZ, it will trigger an INSIST and crash the
server. RRSIG. [RT #24280]

* named, set up to be a caching resolver, is vulnerable to a user
querying a domain with very large resource record sets (RRSets)
when trying to negatively cache the response. Due to an off-by-one
error, caching the response could cause named to crash. [RT #24650]
[CVE-2011-1910]

* Using Response Policy Zone (RPZ) to query a wildcard CNAME label
with QUERY type SIG/RRSIG, it can cause named to crash. Fix is
query type independant. [RT #24715]

* Using Response Policy Zone (RPZ) with DNAME records and querying
the subdomain of that label can cause named to crash. Now logs that
DNAME is not supported. [RT #24766]

* Change #2912 populated the message section in replies to UPDATE
requests, which some Windows clients wanted. This exposed a latent
bug that allowed the response message to crash named. With this
fix, change 2912 has been reduced to copy only the zone section to
the reply. A more complete fix for the latent bug will be released
later. [RT #24777]

* many bugfixes (see CHANGELOG)

* 9.8.1

Wed Aug 31 14:00:00 2011 rhaferAATTsuse.de
- Fixed the ldapdump tool to also respect the \"uri\" setting in
/etc/openldap/ldap.conf (bnc#710430)

Tue Jul 5 14:00:00 2011 ugAATTsuse.de

* Using Response Policy Zone (RPZ) with DNAME records and querying
the subdomain of that label can cause named to crash. Now logs that
DNAME is not supported. [RT #24766]

* If named is configured to be both authoritative and resursive and
receives a recursive query for a CNAME in a zone that it is
authoritative for, if that CNAME also points to a zone the server
is authoritative for, the recursive part of name will not follow
the CNAME change and the response will not be a complete CNAME
chain. [RT #24455]

* Using Response Policy Zone (RPZ) to query a wildcard CNAME label
with QUERY type SIG/RRSIG, it can cause named to crash. Fix is
query type independant. [RT #24715] [CVE-2011-1907]

* Change #2912 (see CHANGES) exposed a latent bug in the DNS message
processing code that could allow certain UPDATE requests to crash
named. This was fixed by disambiguating internal database
representation vs DNS wire format data. [RT #24777] [CVE-2011-2464]

* 9.8.0-P4

Tue Jun 7 14:00:00 2011 ugAATTsuse.de
- A large RRSET from a remote authoritative server that results in
the recursive resolver trying to negatively cache the response can
hit an off by one code error in named, resulting in named crashing.
[RT #24650] [CVE-2011-1910]
- Zones that have a DS record in the parent zone but are also listed
in a DLV and won\'t validate without DLV could fail to validate. [RT
[#24631]]

Mon May 23 14:00:00 2011 crrodriguezAATTopensuse.org
- Build with -DNO_VERSION_DATE to avoid timestamps in binaries.

Thu May 19 14:00:00 2011 meissnerAATTsuse.de
- buildreq update-desktop-files for newer rpms

Thu May 5 14:00:00 2011 ugAATTsuse.de
- The ADB hash table stores informations about which authoritative
servers to query about particular domains
- BIND now supports a new zone type, static-stub
- BIND now supports Response Policy Zones
- BIND 9.8.0 now has DNS64 support
- Dynamically Loadable Zones (DLZ) now support dynamic updates.
- Added a \"dlopen\" DLZ driver, allowing the creation of external DLZ
drivers that can be loaded as shared objects at runtime rather than
having to be linked with named
- named now retains GSS-TSIG keys across restarts
- There is a new update-policy match type \"external\".
- bugfixes
- version to 9.8.0

Thu Feb 24 13:00:00 2011 ugAATTsuse.de
- fixed security issue
VUL-0: bind: IXFR or DDNS update combined with high query rate
DoS vulnerability (CVE-2011-0414 bnc#674431)
- version to 9.7.3

Wed Jan 5 13:00:00 2011 meissnerAATTsuse.de
- ifdef the sysvinit specific prereqs for openSUSE 11.4 and later

Thu Dec 9 13:00:00 2010 mvyskocilAATTsuse.cz
- fix bnc#656509 - direct mount of /proc in chroot

Tue Dec 7 13:00:00 2010 cooloAATTnovell.com
- prereq init scripts syslog and network

Thu Dec 2 13:00:00 2010 ugAATTsuse.de
- fixed VUL-0: bind: Key algorithm rollover bug
bnc#657102, CVE-2010-3614
- fixed VUL-0: bind: allow-query processed incorrectly
bnc#657120, CVE-2010-3615
- fixed VUL-0: bind: cache incorrectly allows a ncache entry and a rrsig for the same type
bnc#657129, CVE-2010-3613

Tue Nov 23 13:00:00 2010 ugAATTsuse.de
- fixed return code of \"rcnamed status\"
- added gssapi support

Tue Oct 12 14:00:00 2010 ugAATTsuse.de
- Zones may be dynamically added and removed with the \"rndc addzone\"
and \"rndc delzone\" commands. These dynamically added zones are
written to a per-view configuration file. Do not rely on the
configuration file name nor contents as this will change in a
future release. This is an experimental feature at this time.
- Added new \"filter-aaaa-on-v4\" access control list to select which
IPv4 clients have AAAA record filtering applied.
- A new command \"rndc secroots\" was added to dump a combined summary
of the currently managed keys combined with statically configured
trust anchors.
- Added support to load new keys into managed zones without signing
immediately with \"rndc loadkeys\". Added support to link keys with
\"dnssec-keygen -S\" and \"dnssec-settime -S\".
- Documentation improvements
- ORCHID prefixes were removed from the automatic empty zone list.
- Improved handling of GSSAPI security contexts. Specifically, better
memory management of cached contexts, limited lifetime of a context
to 1 hour, and added a \"realm\" command to nsupdate to allow
selection of a non-default realm name.
- The contributed tool \"ztk\" was updated to version 1.0.
- version 9.7.1 to 9.7.2-P2

Mon Jul 26 14:00:00 2010 ugAATTsuse.de
- chrooted bind failed to start (bnc#625019)

Mon Jun 21 14:00:00 2010 ugAATTsuse.de
- genrandom: add support for the generation of multiple
files.
- Update empty-zones list to match
draft-ietf-dnsop-default-local-zones-13.
- Incrementally write the master file after performing
a AXFR.
- Add AAAA address for L.ROOT-SERVERS.NET.
- around 50 bugs fixed (see CHANGELOG for details)
- version 9.7.1

Thu May 20 14:00:00 2010 ugAATTsuse.de
- Handle broken DNSSEC trust chains better. [RT #15619]
- Named could return SERVFAIL for negative responses
from unsigned zones. [RT #21131
- version 9.7.0-P2

Sat May 1 14:00:00 2010 ajAATTsuse.de
- Handle /var/run on tmpfs.
- do not use run_ldconfig.

Wed Feb 24 13:00:00 2010 jengelhAATTmedozas.de
- Enable DLZ-LDAP (supersedes sdb_ldap) and add a patch

Wed Feb 17 13:00:00 2010 ugAATTsuse.de
- Fully automatic signing of zones by \"named\".
- Simplified configuration of DNSSEC Lookaside Validation (DLV).
- Simplified configuration of Dynamic DNS, using the \"ddns-confgen\"
command line tool or the \"local\" update-policy option. (As a side
effect, this also makes it easier to configure automatic zone
re-signing.)
- New named option \"attach-cache\" that allows multiple views to
share a single cache.
- DNS rebinding attack prevention.
- New default values for dnssec-keygen parameters.
- Support for RFC 5011 automated trust anchor maintenance
- Smart signing: simplified tools for zone signing and key
maintenance.
- The \"statistics-channels\" option is now available on Windows.
- A new DNSSEC-aware libdns API for use by non-BIND9 applications
- On some platforms, named and other binaries can now print out
a stack backtrace on assertion failure, to aid in debugging.
- A \"tools only\" installation mode on Windows, which only installs
dig, host, nslookup and nsupdate.
- Improved PKCS#11 support, including Keyper support and explicit
OpenSSL engine selection.
- version 9.7.0

Wed Jan 20 13:00:00 2010 ugAATTsuse.de
- [security] Do not attempt to validate or cache
out-of-bailiwick data returned with a secure
answer; it must be re-fetched from its original
source and validated in that context. [RT #20819]
- [security] Cached CNAME or DNAME RR could be returned to clients
without DNSSEC validation. [RT #20737]
- [security] Bogus NXDOMAIN could be cached as if valid. [RT #20712]
- version 9.6.1-P3

Mon Jan 4 13:00:00 2010 ugAATTsuse.de
- removed the syntax check for include files (bnc#567593)

Tue Dec 15 13:00:00 2009 jengelhAATTmedozas.de
- add baselibs.conf as a source
- enable parallel building
- add baselibs for SPARC
- package documentation as noarch

Wed Nov 25 13:00:00 2009 ugAATTsuse.de
- Security fix
When validating, track whether pending data was from
the additional section or not and only return it if
validates as secure. [RT #20438]
CVE-2009-4022
bnc#558260
- update from P1 to P2

Fri Nov 20 13:00:00 2009 ugAATTsuse.de
- added localhost for ipv6 to default config (bnc#539529)

Wed Nov 18 13:00:00 2009 ugAATTsuse.de
- fixed apparmor profile (bnc#544181)

Tue Nov 3 13:00:00 2009 cooloAATTnovell.com
- updated patches to apply with fuzz=0

Wed Sep 30 14:00:00 2009 ugAATTsuse.de
- using start_daemon instead of startproc (bnc#539532)

Mon Aug 10 14:00:00 2009 ugAATTsuse.de
- version update to 9.6.1-P1
(security fix CVE-2009-0696)
bnc#526185

Tue Jun 30 14:00:00 2009 ugAATTsuse.de
- enabled MySQL DLZ (Dynamically Loadable Zones)

Tue Jun 16 14:00:00 2009 ugAATTsuse.de
- around 50 bugfixes against 9.6.0p1
See changelog for details
- version 9.6.1

Thu Apr 9 14:00:00 2009 ugAATTsuse.de
- not all include files were copied into chroot (bnc#466800)

Tue Mar 3 13:00:00 2009 ugAATTsuse.de
- /etc/named.conf does not include /etc/named.d/forwarders.conf
by default (bnc#480334)