Changelog for kiwi-test-5.05.19-16.1.noarch.rpm :

* Fri Jun 07 2013 msAATTsuse.de- v5.05.19 released
* Fri Jun 07 2013 msAATTsuse.de- if the bootloader can\'t be installed stop the boot process and print a warning message to the user. Continue the boot with a wait-for-key exception (bnc #823617)
* Thu Jun 06 2013 msAATTsuse.de- added support to specify the size of the root volume. With regards to the latest LVM consistency checks and adaptions it was only possible to set one volume as the one taking the rest space. This is either the root volume or the one flagged as freespace=\"all\". The possibility to setup a specific size for the root volume and define another volume to take the rest space was lost. With this commit you can now optionally define the size of the root volume: I also fixed the LVM setup when used with standard vmx virtual disks and introduced new consistency checks e.g it doesn\'t make sense to specify both size and freespace for one volume
* Tue Jun 04 2013 msAATTsuse.de- fixed fetchFile function. The variable $imageBlkSize is not initialized, so it is better to use $chunk
* Tue Jun 04 2013 rjschweiAATTsuse.de- write dvd/cd device entry to vmx file if the device ide is 0 (bnc 822185)
* Mon Jun 03 2013 msAATTsuse.de- fixed getSingleInstSourceSatSolvable()
* instead of rely on the suffix of a file it\'s better to actually check if it\'s compressed or non compressed data due to redirections and symlinks it might happen that a file name e.g \'packages\' is resolved into \'packages.en.gz\' kiwi downloaded the file and failed to check that it\'s a compressed file (bnc #822247)
* Mon Jun 03 2013 msAATTsuse.de- improved error output of failed schema validation
* also check if the converted file can be created or not
* Mon Jun 03 2013 msAATTsuse.de- fixed 5.7 to 5.8 xsl stylesheet
* Mon Jun 03 2013 msAATTsuse.de- fixed evaluation of oem-ataraid-scan parameter
* Mon Jun 03 2013 msAATTsuse.de- fixed raw disk size calculation for split images the boot partition size was not taken into account
* Sun Jun 02 2013 msAATTsuse.de- added support for zfs filesystem
* still problems with grub2-mkconfig, can\'t find canonical path
* Thu May 30 2013 msAATTsuse.de- preserve haveged, related to (bnc #766720)
* Thu May 30 2013 msAATTsuse.de- fixed OEMRepartLVM creation of recovery partition
* the recovery partition eats up all free space but it should use only the needed space to store the recovery data.
* Thu May 30 2013 msAATTsuse.de- cleanup fix, use long option --file in grub search instead of -f. That\'s consistent with the other grub search calls
* Wed May 29 2013 msAATTsuse.de- make sure udev is installed and not udev-mini
* Wed May 29 2013 msAATTsuse.de- fixed search method used in grub.cfg
* we already moved to a uuid search in the early grub config but in the main grub.cfg it was still a file search which for some reasons is not as stable as the uuid search even though I always find the file in the grub shell with ls
* Wed May 29 2013 msAATTsuse.de- make sure partition names are set back within the oem repartition code
* Wed May 29 2013 msAATTsuse.de- fixed restore of boot partition
* if a different filesystem is used for the root and the boot partition the problem appeared that the restore code uses the filesystem type of the root partition for the restore of the boot partition
* Wed May 29 2013 msAATTsuse.de- fixed names set for partitions in the GPT
* lxlvm, lxro, lxrw, lxroot, lxboot, legacy, UEFI are possible
* use 2MB for the legacy BIOS boot partition
* use 32MB for the UEFI fat partition
* really evalute return values from parted calls
* Tue May 28 2013 msAATTsuse.de- removed experimental code from oem partition install block if the partition table did not fit the need kiwi tried to read-only mount the not yet installed image via a device mapper snapshot and starts a X session with gparted to make it easier for the user to setup the partition table. The idea is nice but there are too many pitfalls and it has been proven that it\'s better to offline prepare the install target and not do that while inside a minimal initrd system
* Tue May 28 2013 msAATTsuse.de- update XML description to new schema version
* Tue May 28 2013 msAATTsuse.de- update schema version from 5.7 to 5.8
* removed syncMBR attribute and create an xsl template for it
* Tue May 28 2013 msAATTsuse.de- rewrite of the legacy BIOS/CSM support
* removed the syncMBR attribute from the XML schema
* changed the partition layout if firmware=\"efi\" is specified. A new partition with flag \'bios_grub\' is created
* install the bios grub2 into the protective MBR which exists according to the EFI spec if a GPT is used. The special bios_grub flaged partition is required to allow grub2 to install
* Fri May 24 2013 msAATTsuse.de- v5.05.18 released
* Fri May 24 2013 msAATTsuse.de- fixes for the oem partition install mode:
* fixed check for amount of required partitions
* removed check for partid, does not work well with GPT
* fixed handling to be more generic and more independent from the number of partitions in the image. Using the filesystem label for selecting the partitions- fixed runInteractive function and call params:
* don\'t use --stdout option for dialog, the written result contains escape characters which confuses the code. Instead use the default stderr channel where dialog write its results
* Thu May 23 2013 msAATTsuse.de- fixed oem partition install mode. Use kpartx sync mode to make sure devices are created on return of the call
* Thu May 23 2013 msAATTsuse.de- v5.05.17 released
* Wed May 22 2013 msAATTsuse.de- don\'t repart the disk if less than 5MB are free
* Wed May 22 2013 msAATTsuse.de- fixed __checkLVMoemSizeSettings runtime check to work correctly with the \'all\' size specification
* Wed May 22 2013 msAATTsuse.de- create global function dsize() which implements a size method to calculate the size of all entities in a directory using the du utility. du is called in two passes first in standard mode counting disk usage and secondly in apparent mode also checking for files with holes, fragmentation, indirect blocks and the like. The biggest value is returned
* Tue May 21 2013 msAATTsuse.de- fixed getInstSourceFile_legacy proxy setup:
* Thanks to Roman for a better regexp to get the proxy url
* prevent double inclusion of source locator
* Tue May 21 2013 msAATTsuse.de- fixed suse-SLE11-JeOS template:
* the package grub2 was dropped for SLES-SP3 RC2
* Tue May 21 2013 msAATTsuse.de- fixed provideMediaLicense function. The url passed to the getInstSourceFile_legacy contained a weird quoting
* Tue May 21 2013 msAATTsuse.de- v5.05.16 released
* Tue May 21 2013 msAATTsuse.de- fixed getInstSourceFile_legacy to work correctly with proxy url\'s the function cut the proxy data together with the information which file to download and lost the file information
* Mon May 20 2013 msAATTsuse.de- fixed and optimized disk size calculation
* I had by default 40% spare space on the root path which seems to be too much, I have 20% spare on each volume so I adapted that to the root path as well.
* for the size estimation I now use the --apparent-size option in du, which works better on files with holes and other or other attributes which makes a difference when copying those data.
* Use a fixed value for the filesystem overhead each volume adds to the disk. It is wrong to calculate and add a 20% spare/volume according to the size of the data in the volume to the disk, because that value has already been taken into account with the data spare calculation of the entire tree
* Mon May 20 2013 msAATTsuse.de- fixed __checkSystemDiskData runtime check to work correctly with the \'all\' size specification
* Sat May 18 2013 msAATTsuse.de- restructure the use of prebuilt boot images
* adapt to new data structure thus we get rid of checkAndSetupPrebuiltBootImage, getDefaultPrebuiltDir_legacy
* moved the logic for using a prebuilt version of a boot image into the image creator code at the level of prepareBootImage and createBootImage. This saves us one KIWIXML instance
* write one function createImageBootImage which does either the prepare/create of the boot image or the use of an existing prebuilt version. reduces some code duplication
* Sat May 18 2013 msAATTsuse.de- adapt handling of bootkernel and bootprofile to new data structure
* there is still the function __populateDefaultProfiles_legacy active and working but as soon as this code will go away the transfer of the \'bootkernel\' and \'bootprofile\' attributes from the system image into the boot image must follow the new data structure which is based on get and set methods. Actually this change also fixes the creation of the .profile kiwi_drivers data because the code writing this is already based on the new internal data structure and was missing the correct boot profile information according to bootkernel and bootprofile
* Fri May 17 2013 msAATTsuse.de- fixed unaligned done flags
* Fri May 17 2013 msAATTsuse.de- cleanup KIWIXML constructor
* The object variables $this->{buildType} and $this->{defaultType} were used without any real context and are just a copy of $imageType and $this->{selectedType}
* Fri May 17 2013 msAATTsuse.de- fixed __populateDriverInfo
* the function did not work correctly with the default profile name. It uses the kiwi internal default profile name \'kiwi_default\' as real profile name and failed to use a section as default section if the \'default\' profile name was explicitly specified like it is the case for the netboot boot image descriptions
* Fri May 17 2013 msAATTsuse.de- cleanup code, prevent warning messages
* Fri May 17 2013 msAATTsuse.de- v5.05.15 released
* Fri May 17 2013 msAATTsuse.de- fixed structure of unpacked image tree when build with a cache In order to avoid any conflicts concerning code operating on the unpacked image tree it\'s required that the structure with and without using a base cache image is the same
* Thu May 16 2013 msAATTsuse.de- v5.05.14 released
* Thu May 16 2013 msAATTsuse.de- DB: rebuild documentation
* Thu May 16 2013 msAATTsuse.de- Revert \"- DB: update documentation, changed cache location\" This reverts commit: 5e8a4ba11f6a8b29e2a60df91bd16e0c27adca35
* Thu May 16 2013 msAATTsuse.de- Revert \"- moved default kiwi cache image location\" according to FHS /var/tmp/kiwicache is not allowed. This reverts commit: 5d667b7bb2d1774fe02835e378788638fcf9c582
* Thu May 16 2013 msAATTsuse.de- v5.05.13 released
* Wed May 15 2013 msAATTsuse.de- fixes for openSUSE 13.1 boot descriptions
* removed support for legacy grub
* add Mesa to delete list, for some reason that gets pulled in now so we make sure it will be removed
* Wed May 15 2013 msAATTsuse.de- use xz compressor for live iso\'s based on overlayfs
* Wed May 15 2013 msAATTsuse.de- fixed suseGFXBoot to work correctly if a two bootloader setup is requested like it is the case with EFI capable hybrid iso\'s. They use isolinux/gfxboot for the bios boot case and grub2/grub2-branding for the EFI boot. Thus the branding data needs to be handled for both and not only one loader
* Wed May 15 2013 msAATTsuse.de- update default strip data to make the initrd a bit smaller
* remove /usr/share/grub2/backgrounds
* remove /usr/share/kbd
* remove /usr/lib/rpm
* Wed May 15 2013 msAATTsuse.de- improved/changed image caching system
* switched from btrfs to overlayfs
* no loop mounts involved anymore, thus one layer less
* using native kernel overlay filesystem which performs better than fuse based filesystems. btrfs has turned out to work unstable when using loop devices and I could not find a noticeable performance difference between btrfs seed devices and the overlayfs upper/lower system
* no cache files but cache trees. full freedom for the user to store those data on NFS, tmpfs, read-only locations...
* all package solver tasks now done via satsolver, solvables will also be cached, no hacky ignore of packages in the cache selection code
* following the keep it simple principle. the caching code is now pretty straight forward
* Wed May 15 2013 msAATTsuse.de- DB: rebuild documentation
* Wed May 15 2013 msAATTsuse.de- DB: update documentation, changed cache location
* Wed May 15 2013 msAATTsuse.de- allow options for mksquashfs in createImageSquashFS
* Tue May 14 2013 msAATTsuse.de- cache creation fixes:
* make sure there are no // in path spec of kiwi-root.cache
* ignore warning about missing auxiliary vector
* Tue May 14 2013 msAATTsuse.de- moved default kiwi cache image location to /var/tmp/kiwicache instead of /var/cache/kiwi. I found problems with bind mounts into the same directory level
* Tue May 14 2013 msAATTsuse.de- v5.05.12 released
* Tue May 14 2013 msAATTsuse.de- if a targetdevice is used instead of a loop we need to wait for udev to finish the event loop in the same way as it is done in bindDiskPartitions() when binding the partitions of a loop device (bnc #819772)
* Fri May 10 2013 msAATTsuse.de- DB: rebuild documentation
* Fri May 10 2013 msAATTsuse.de- DB: update documentation + added some notes about new postHWdetect hook + added some notes about how software raid works in kiwi images
* Fri May 10 2013 msAATTsuse.de- add hook entry point called: postHWdetect
* it allows to create/modify your own representation of the deviceDisks array containing the found install disk devices
* Fri May 10 2013 msAATTsuse.de- allow to control whether kiwi searches for ata raid controllers or not using the dmraid utility. This is useful if an alternative control tool exists or the raid should be ignored in any case: true|false By default the search and activation happens if dmraid is installed. Implemented by user feedback request (bnc #815206)
* Tue May 07 2013 msAATTsuse.de- fixed gettext import, the import was done prior to the export of the LANG environment which caused some texts to be in the wrong language
* Tue May 07 2013 msAATTsuse.de- make sure there is an active boot/root partition after the oem code has repartitioned the disk
* Tue May 07 2013 msAATTsuse.de- allow alternative grub2 search path lib/grub and share/grub as it is packaged on Fedora
* Tue May 07 2013 msAATTsuse.de- fixed setupLocale to work with locale list separated by \',\'
* Sun May 05 2013 mkoeglerAATTsuse.de- fixed CD/DVD boot of live iso images with activated hybridpersistent option. kiwi will try to create the read-write partition but will fail if this image is booted from a read-only medium. Thus it should deactivate the hybridpersistent feature and proceed the boot
* Sun May 05 2013 msAATTsuse.de- fixed use of uninitialized value $key in KIWIManagerYum.pm
* Fri May 03 2013 msAATTsuse.de- v5.05.11 released
* Fri May 03 2013 msAATTsuse.de- fixed xen dom0 boot configuration
* the xen hypervisor was copied by kiwi as \'xen.gz.vmx\' but the configuration was written to search for xen.gz and failed
* Fri May 03 2013 msAATTsuse.de- don\'t use the same inode count calculated for root for the boot and/or efi filesystem
* Fri May 03 2013 msAATTsuse.de- fixed restore of boot partition in recovery/restore mode for systems which uses an extra boot partition
* Thu May 02 2013 msAATTsuse.de- fixed activation of md-raid array if no repartition process takes place
* Thu May 02 2013 msAATTsuse.de- fixed display of language selection dialog:
* if lang is _not_ set in /proc/cmdline we will now use the first language set in kiwi_language for the boot image. Thus a language selection dialog only appears if lang is explicitly set to \'ask\'
* Thu May 02 2013 msAATTsuse.de- fixed setup of recovery in a raid image. The meta information telling the system how big the recovery partition should be is now stored in the kiwi initrd and not in the image as it was before. According to this the broken mount code at that place could be removed
* Tue Apr 30 2013 msAATTsuse.de- netboot: fixed setup of swap device in $imageSwapDevice If the partition table stays untouched the variable was not set which caused a broken fstab entry for swap. This patch makes sure the swap device variable is set in any case
* Tue Apr 30 2013 msAATTsuse.de- don\'t show the same message twice
* Tue Apr 30 2013 msAATTsuse.de- removed unneeded/wrong message
* Mon Apr 29 2013 msAATTsuse.de- changed grub2 early boot script to search for the fs-uuid of the boot filesystem in order to locate the config file
* Mon Apr 29 2013 msAATTsuse.de- DB: rebuild documentation
* Mon Apr 29 2013 msAATTsuse.de- DB: update config.sh manual page, template fix
* Mon Apr 29 2013 msAATTsuse.de- use the new baseMount() function in all config.sh scripts provided by the kiwi JeOS templates
* Mon Apr 29 2013 msAATTsuse.de- added function baseMount() to kiwi script functions. The function mounts all useful kernel filesystems e.g proc, sysfs devpts and binfmt_misc. if the kiwi scripts are called in a contained environment like it is the case if lxc is installed on the image build machine it is required to mount the base filesystems as one of the first steps in the script
* Mon Apr 29 2013 msAATTsuse.de- make sure binfmt_misc is mounted in the context of config.sh
* Mon Apr 29 2013 msAATTsuse.de- write etc/default/grub_installdevice, which is not required by grub2 at all but by other tools in openSUSE
* Thu Apr 25 2013 rjschweiAATTsuse.de- follow up to 3d0e1e944d169 + add unit tests for skip-oem-verify + oem-skip-verify and oem-silent-verify are ambiguous if both are true generate appropriate error
* Wed Apr 24 2013 msAATTsuse.de- v5.05.10 released
* Wed Apr 24 2013 msAATTsuse.de- added \'which\' package to boot image descriptions for openSUSE 13.1. which was formerly provided by util-linux and is now an own package (bnc #816709)
* Wed Apr 24 2013 msAATTsuse.de- DB: rebuild documentation
* Wed Apr 24 2013 msAATTsuse.de- DB: update documentation
* Wed Apr 24 2013 msAATTsuse.de- fixed use of swapsize in oem size settings + the boot code adds the swap size as additional needed space to the oem-systemsize value thus it\'s wrong to test if swap fits into oem-systemsize. Robert had that before so this was correct, sorry Rob for changing this
* Tue Apr 23 2013 msAATTsuse.de- v5.05.9 released
* Tue Apr 23 2013 msAATTsuse.de- DB: rebuild documentation
* Tue Apr 23 2013 msAATTsuse.de- reflect the change in the oem-systemsize handling also in the LVM repartition code
* Mon Apr 22 2013 rjschweiAATTsuse.de- follow up to OEM setup consistency checking + separate the checks to allow unit testing and create unit tests + update the documentation to explain the meaning and interplay between and
* Mon Apr 22 2013 msAATTsuse.de- fixed misleading warning message in __getBootSize(). if wanted and needed boot partition space is the same a warning message was printed which is not useful
* Mon Apr 22 2013 msAATTsuse.de- fixed schema documentation: + if the size of a volume is set too small this is now treated as an error and kiwi exits. formerly this was ignored and kiwi used the value it calculated itself for the volume
* Mon Apr 22 2013 msAATTsuse.de- with regards to (bnc #815200) following runtime checks were added + check if the specified system size is not smaller than the sum of the specified partition/volume sizes + recommend to specify a swap size if swap is requested and a specific system and or partition/volume size was specified + check if partition/volume path exists in the unpacked tree + check if size of partition/volume in the unpacked tree is smaller than the requested partition/volume size + check if specified system size is not smaller than the overall size of the unpacked tree + check if the calculated free space according to the requested system size value and the current size of the unpacked tree is big enough to resize the partitions/volumes to its requested size
* Mon Apr 22 2013 msAATTsuse.de- fixed spec file, the mysystems macro for openSUSE was broken because it uses VER=1220 on a 12.3 system
* Sun Apr 21 2013 msAATTsuse.de- fixed spec file, sync permissions with /srv/tftpboot
* Sun Apr 21 2013 msAATTsuse.de- fixed SUSE product creation if specified MAIN_PRODUCT does not match the product name. In this case the collection of products is skipped with a warning message
* Fri Apr 19 2013 rjschweiAATTsuse.de- do not consider obsrun as a system group
* Thu Apr 18 2013 msAATTsuse.de- allow to skip the md5 verification after image installation of an oem image. This speeds up the deployment but should not be de-activated for customer released images true|false Implemented by user feedback request (bnc #815199)
* Thu Apr 18 2013 msAATTsuse.de- netboot: fixed conflicting use of global variables. + The function updateNeeded set among others the variable sum2 which is used later in another context in suse-linuxrc. At that point it was expected that the variable is empty for the first round in a loop but that\'s not true if updateNeeded called before the loop sets the variable to some content. Thus updateNeeded should handle variables used locally in the function as real local variables
* Wed Apr 17 2013 msAATTsuse.de- it does not make sense to specify \'-i bytes-per-inode\' in combination with \'-N number-of-inodes\'. Thus only the number of inodes is relevant as it\'s the result of the equation inodes = size / ratio. It had no bad impact to specify both -i and -N when creating the filesystem because mkfs.extX takes the value of -N with the highest priority. Thus this fix is just a cleanup of the mkfs.extX call
* Wed Apr 17 2013 msAATTsuse.de- fixed setup of recovery boot data + the code there only uses the contents of the boot partition if LVM was enabled. But correct would be to use the contents of the boot partition if it exists and is not equal to the root partition
* Tue Apr 16 2013 msAATTsuse.de- fixed setupBootLoaderGrub to write the udev device name into /boot/grub/device.map instead of the unix kernel device name (bnc #813216)
* Tue Apr 16 2013 msAATTsuse.de- add missing suseImportBuildKey call to templates
* Tue Apr 16 2013 msAATTsuse.de- fixed suseImportBuildKey to also work with keys present in /usr/lib/rpm/gnupg/keys/
* Tue Apr 16 2013 msAATTsuse.de- fixed check if repartition task can be done or not. It\'s now based on free spaces vs. additional needed space. Also provide better information about the sizes if the repartition task can\'t be done- fixed resize of LVM partition. It\'s important to add the swap size to be part of the LVM resize because swap is not an extra partition but a volume inside the vgroup
* Tue Apr 16 2013 msAATTsuse.de- fixed typo nomodeseet -> nomodeset
* Tue Apr 16 2013 msAATTsuse.de- fixed LVM resize of physical extents, pvresize works only with unix kernel device names and doesn\'t like udev links
* Tue Apr 16 2013 msAATTsuse.de- use generic function resizeLVMPVs in OEMPartitionInstall too
* Tue Apr 16 2013 msAATTsuse.de- fixed OEMRepartLVM, to pass correctly formated size value to createPartitionerInput, value requires a unit suffix
* Tue Apr 16 2013 msAATTsuse.de- v5.05.8 released
* Tue Apr 16 2013 msAATTsuse.de- use uuid search only in livestick, remove the flag file
* Mon Apr 15 2013 msAATTsuse.de- fixed split createTmpTree, return if lstat returns undef
* Mon Apr 15 2013 msAATTsuse.de- make sure index file will be removed in case of an error in the getSingleInstSourceSatSolvable() function
* Mon Apr 15 2013 msAATTsuse.de- fixed use of lwp-download with complex zypper URL\'s containing additional proxy, proxy-user/pwd information
* Sat Apr 13 2013 msAATTsuse.de- changed offset=64 to offset=0 for isohybrid. this fixes the problem of missing partition devices in legacy BIOS mode
* Sat Apr 13 2013 msAATTsuse.de- fixed dereferencing of undefined values if no profiles are used
* Fri Apr 12 2013 msAATTsuse.de- DB: rebuild documentation
* Fri Apr 12 2013 msAATTsuse.de- fixed typos: Replace \"(c|C)onfiguartion\" with \"(c|C)configuration\"
* Fri Apr 12 2013 msAATTsuse.de- fixed typos: Replace \"(c|C)onfiguartion\" with \"(c|C)configuration\"
* Fri Apr 12 2013 msAATTsuse.de- fixed typos: Replace \"(c|C)onfiguartion\" with \"(c|C)configuration\"
* Fri Apr 12 2013 msAATTsuse.de- added support for overlayfs as root filesystem for the disk based image types oem and vmx. Unfortunately the tool chain is not really prepared for such systems. I found the following issues which are not a kiwi business:
* grub2-mkconfig failed to get canonical path of overlayfs
* mkinitrd does not work if the rootfs is an overlayfs Thus when building an image with filesystem=\"overlayfs\" it can be booted only once with the kiwi initrd. the subsequent reboot failed when using grub2. funny enough with the legacy grub it works because kiwi writes the config in this case
* Fri Apr 12 2013 msAATTsuse.de- added helper tool called livestick: + allows deployment of live ISO images on USB sticks without destroying any data on the stick. The system is based on grub2 which loads via loopback the kernel and the initrd from the transfered iso image file. In addition to that custom writing happens into a cowfile and not into a partition. Using livestick recommends the use of the overlayfs filesystem (flags=\"overlay\") because that has proven to work fast and nicely with a cowfile
* Fri Apr 12 2013 msAATTsuse.de- follow up fix for the last commit concerning the unit tests make sure unwanted duplicate entries are replaced
* Fri Apr 12 2013 msAATTsuse.de- don\'t use opensuse:// urls in unit tests. that sucks inside the buildservice if the service redirector is broken
* Fri Apr 12 2013 msAATTsuse.de- added aarch64 as supported arch to the KIWIXML ctor
* Thu Apr 11 2013 msAATTsuse.de- use a --label search for the grub2 setup if possible
* Thu Apr 11 2013 msAATTsuse.de- make sure imx, dtb and elf files are moved correctly in the boot partition
* Thu Apr 11 2013 msAATTsuse.de- fixed loading of network drivers in oemboot dump code
* Thu Apr 11 2013 msAATTsuse.de- arm: make sure elf binaries (.elf) will be extracted
* Thu Apr 11 2013 msAATTsuse.de- reduce code duplication for rsync call
* Thu Apr 11 2013 msAATTsuse.de- fixed spec file to build correctly for aarch64
* Thu Apr 11 2013 msAATTsuse.de- arm: added missing arch links in system/repo
* Thu Apr 11 2013 msAATTsuse.de- arm: make sure device tree (.dtb) is extraced from the boot image
* Wed Apr 10 2013 msAATTsuse.de- v5.05.7 released
* Wed Apr 10 2013 msAATTsuse.de- added JeOS templates for openSUSE 13.1
* Wed Apr 10 2013 msAATTsuse.de- call zeroMDRaidSuperBlock only if kiwi_RaidDev is specified
* Wed Apr 10 2013 rjschweiAATTsuse.de- add boot image link for armv6- add armv6 and armv5el to list of supported architectures- create setup for bootimage for 13.1 + this will fix the package build in OBS
* Tue Apr 09 2013 msAATTsuse.de- fixed regexp flags, causing trouble in older perl versions
* Tue Apr 09 2013 msAATTsuse.de- remove \'mdadm\' from the delete section of the SLES boot image descriptions. mdadm is used by the boot code if a raid setup is configured
* Mon Apr 08 2013 msAATTsuse.de- make sure optional liveCD mount points /cow and /isofrom are moved into the system when they exist
* Mon Apr 08 2013 rjschweiAATTsuse.de- add armv5el boot architecture link
* Sun Apr 07 2013 msAATTsuse.de- fixed plymouth splash activation in kiwi initrd. It\'s done in the same way systemd does it. after the start of the plymouth daemon it\'s required to wait for udev events to settle before showing the splash screen
* Sun Apr 07 2013 msAATTsuse.de- make sure --solv-cache-dir points to the same base directory as --cache-dir. Without this setup the cookie cache gets lost inside the chroot and thus repositories with credentials might fail the authentication
* Sun Apr 07 2013 msAATTsuse.de- fixed loop name collision in isofrom mode
* Sat Apr 06 2013 msAATTsuse.de- use kiwi_cowdevice and kiwi_cowsystem instead of kiwi_cowfile the used colon as separator conflicts with the by-id names
* Sat Apr 06 2013 msAATTsuse.de- fixed ctor test for improper LVM2 volume name
* Fri Apr 05 2013 msAATTsuse.de- fixed kiwi_cowfile usage, broken return condition
* Fri Apr 05 2013 msAATTsuse.de- allow both parted gpt_sync_mbr table type and the gptsync program. if gptsync is installed it will take over precedence
* Tue Apr 02 2013 rjschweiAATTsuse.de- allow lxc as a value for the packages type attribute to support container specific package specification
* Sat Mar 30 2013 bernhardoutAATTsuse.de- reduce duplicate code
* Thu Mar 28 2013 msAATTsuse.de- call syncGPT only if partedTableType is gpt
* Thu Mar 28 2013 msAATTsuse.de- follow up fix for 12.3 openNebula examples: + grub2-branding has to stay installed inside the initrd + no theme was selected
* Thu Mar 28 2013 msAATTsuse.de- make sure splash is deactivated for any dialogs displayed while inside the kiwi initrd (bnc #812099)
* Wed Mar 27 2013 rjschweiAATTsuse.de- fixup the openNebula example for 12.3- use grub2 as bootloader- switch the branding packages- fixup the custom firstboot procedure to avoid an error
* Wed Mar 27 2013 msAATTsuse.de- fixed checkmedia call if used in hybrid disk mode. in this mode a disk partition device was passed instead of the entire disk device (bnc #804160)
* Mon Mar 25 2013 msAATTsuse.de- moved the check for the Amazon EC2 toolkit after the check for the credentials. If no or not enough credentials are provided the bundling is skipped and that\'s not an error. Thus it\'s ok to miss ec2-bundle-image at that point so the check needs to be done after successfully checking for the pre-conditions
* Mon Mar 25 2013 msAATTsuse.de- fixed addBootEFILive function to work for 32bit ISO\'s + the boot path was hardcoded to boot/x86_64. With this patch the path to the bootloader files is searched
* Fri Mar 22 2013 rjschweiAATTsuse.de- follow up to driver data migration into new XML data structure + implement KIWIProfileFile class to represent data in the .profile file. This class allows us to gradually move data that is processed in the XML changeset and ends up in .profile without duplicating code in other places- remove attempt to write kiwi_luks to the .profile file + kiwi_luks is not used, no longer needed- add diffutils as build requires + diff needed by new unit tests- unit tests for new code
* Thu Mar 21 2013 msAATTsuse.de- v5.05.6 released
* Thu Mar 21 2013 msAATTsuse.de- fixed use of uninitialized value
* Thu Mar 21 2013 msAATTsuse.de- run XML validator on the code
* Thu Mar 21 2013 msAATTsuse.de- fixed changelog build helper to correctly indent sub entries starting with a \'+\' or \'
*\' prefix
* Wed Mar 20 2013 rjschweiAATTsuse.de- add unit test for syncMBR attribute
* Wed Mar 20 2013 msAATTsuse.de- added attribute syncMBR in the type element to activate the MBR synchronisation into the GPT for efi images
* Wed Mar 20 2013 msAATTsuse.de- fixed calculation of inode number if no XML size is set in this case the variable contains the value \'auto\' and this can\'t be used in numeric expressions
* Wed Mar 20 2013 msAATTsuse.de- make sure zImage kernels for arm gets detected
* Wed Mar 20 2013 rjschweiAATTsuse.de- add support for EC2 AP-Sydney region
* Wed Mar 20 2013 msAATTsuse.de- fixed calculation of inode number in KIWIBoot constructor for vmx images which requested a specific size in the XML description it\'s required to calculate the inode count from the specified size and not from the size of the of the unpacked root tree. If the requested image size is much bigger than the unpacked root tree it might happen that we run out of inodes very soon in the later image
* Wed Mar 20 2013 rjschweiAATTsuse.de- v5.05.5 released
* Wed Mar 20 2013 rjschweiAATTsuse.de- fix build of split image type + regression introduced by restructuring effort, commit 853e6fc3
* Wed Mar 20 2013 msAATTsuse.de- fixed typos and white space errors
* Wed Mar 20 2013 rjschweiAATTsuse.de- implement ImageBuilder for tar archives (KIWITarArchiveBuilder) + remove createImageTar from KIWIImage class + update the Factory to return the new builder type + update ImageCreator + update triggers + implement new unit tests
* Tue Mar 19 2013 rjschweiAATTsuse.de- update build and runtime requirements + add rsync as build requires, new test uses code path that requires rsync + add perl-Digest as build requires and requires, new test generates a checksum- add code to handle absence of /proc/mounts + this is useful when working in a local osc sandbox with osc chroot where /proc/mounts does not exist
* Tue Mar 19 2013 rjschweiAATTsuse.de- move all the driver handling in the XML from the old data model to the new data model
* remove addDrivers_legacy
* remove getDriversNodeList_legacy
* remove the driversNodeList class member
* Tue Mar 19 2013 msAATTsuse.de- allow option for KIWIManager
*::setupUpgrade() to operate in a mode which checks only for the requested package transactions and allow to skip the dist upgrade. This mode is used in the kiwi --create step to prevent auto dist upgrades which should only happen if kiwi --upgrade is called
* Mon Mar 18 2013 msAATTsuse.de- fixed copyBootCode and suseGFXBoot to be more generic with regards to the different u-boot img/bin files
* Mon Mar 18 2013 msAATTsuse.de- create aarch64 link to boot images. Currently this points to the same boot description files used for armv7 and armv5
* Mon Mar 18 2013 msAATTsuse.de- make sure splash stays on screen when in oem-silentboot mode
* Mon Mar 18 2013 rjschweiAATTsuse.de- apply new method naming convention, use p_ as prefix for \"protected\" methods
* Mon Mar 18 2013 msAATTsuse.de- don\'t use grub2 modules from host system if not found in initrd + instead enable/disable support according to stages (BIOS/EFI) + print better error message in case of missing required stages + allow plain BIOS, plain EFI and EFI+BIOS setup
* Mon Mar 18 2013 rjschweiAATTsuse.de- improve the KIWI
*Builder framework + rename the ImageBuilder class to ImageBuilderBase to indicate base class status of the implementation + rename methods according to naming convention + add checksum creation capabilities to the ImageBuilderBase class- add method to execute images.sh explicitly to the Image class + the image class will transition to only represent the unpacked image. The new methods executes images.sh in the unpacked image tree + fixup the destructor to avoid \"uninitialized\" messages from Perl if object creation fails- improve the container build + run images.sh file + create a checksum for the container file- add naming convention to the developer documentation- fix up the pre-commit hook script to deal with file removal or renames. When moving/renaming or renaming a file, git still presents the old file name as \"changed\" previously this would break the code checking the modified files. Compile errors, registration errors, and perlcritic errors would be generated- add entry to container configuration file indicating device handling. This is lxc version dependent and kiwi does not know the host where the container is deployed, thus we cannot add the setting to the configuration without guard- create unit tests for the ImageBuilderBase class- create a rudimentary unit test for the Image class
* Mon Mar 18 2013 msAATTsuse.de- fixed stage directory check for grub2
* Mon Mar 18 2013 msAATTsuse.de- make sure profile information is used in all kiwi modes
* Mon Mar 18 2013 msAATTsuse.de- fixed call of undefined subroutine &KIWIGlobals::qxx
* Mon Mar 18 2013 msAATTsuse.de- added option --force-bootstrap in combination with --recycle-root in the kiwi modes --prepare and/or --create. When using a base tree with --recycle-root kiwi normally skips the bootstrapping part because that data should all be part of the base tree. If the tree is not complete in this regard, e.g missing zypper one can now enforce the bootstrapping phase to be called.
* Sun Mar 17 2013 msAATTsuse.de- fixed directory creation in KIWIImageCreator. the profile information was stored in a variable which was not used
* Sun Mar 17 2013 msAATTsuse.de- fixed typo in function name
* Sat Mar 16 2013 rjschweiAATTsuse.de- make the methods of the XML data base class public + brings code into allignment with other OO use in other langauges + the base class nature is indicated by the name
* Fri Mar 15 2013 msAATTsuse.de- added support for hybrid EFI disk images based on gptsync.
* if gptsync is installed an MBR is added to the GPT table
* this allows to boot plain vmx images via legacy BIOS and EFI
* this allows to boot oem disk via legacy BIOS and EFI The repartition code of an EFI oem will overwrite the MBR placed by gptsync. Thus the kiwi initrd tries to re-add the information by calling syncGPT. The funtion requires the presence of gptsync and sfdisk inside the kiwi initrd. Both tools are not part of the kiwi initrd by default
* this allows to boot oem install media via legacy BIOS and EFI oem install media are install ISOs and install sticks
* please note placing an MBR into the GPT is outside of the EFI standard. It might happen that an EFI firmware refuse to boot a system which includes a MBR inside the GPT. Thus gptsync support should be seen as experimental
* Fri Mar 15 2013 msAATTsuse.de- v5.05.4 released
* Fri Mar 15 2013 msAATTsuse.de- fixed unit test: kiwiContainerBuilder + the test used the getArch() function from the global space this function turns any 32bit arch name into \'ix86\' but the container builder code uses the value from \'uname -m\' in the generateBuildImageName() function and thus the arch value used here is like \'i686\'. Therefore the unit test will fail on all 32bit x86 architectures
* Fri Mar 15 2013 msAATTsuse.de- v5.05.3 released
* Fri Mar 15 2013 msAATTsuse.de- fixed package build, lxc is required for unit testing
* Fri Mar 15 2013 msAATTsuse.de- v5.05.2 released
* Thu Mar 14 2013 msAATTsuse.de- fixed getSingleInstSourceSatSolvable() in terms of pattern handling. the function stores projectxml always with the the suffix .gz which indicates a compressed version of the file. But the patterns information file could also contain a non compressed version of patterns.xml which is then wrongly used as compressed file
* Wed Mar 13 2013 msAATTsuse.de- the btrfsctl utility is deprecated and will be removed soon There was one code path in kiwi which needs to be adapted to understand both btrfs and btrfsctl (bnc #808962)
* Tue Mar 12 2013 msAATTsuse.de- fixed setup of selectedProfiles information. The way it was done before possibly overwrites information provided on the commandline
* Tue Mar 12 2013 msAATTsuse.de- added openSUSE 12.3 boot and JeOS templates for armv7
* Mon Mar 11 2013 msAATTsuse.de- more robust code: + getStorageSize, returns an error if device is not present + retry of partition creation no longer endless
* Mon Mar 11 2013 msAATTsuse.de- removed unused function getRemovableUSBStorageDevices()
* Mon Mar 11 2013 msAATTsuse.de- use kpartx sync mode to make sure devices are created on return of the call
* Mon Mar 11 2013 msAATTsuse.de- make sure writeTester gets installed
* Fri Mar 08 2013 rjschweiAATTsuse.de- added tests/writeTester for XML import/export tests
* Fri Mar 08 2013 rjschweiAATTsuse.de- handle repositories in the new data structure + remove legacy methods for repository handling ~ getHttpsRepositoryCredentials_legacy ~ getRepositories_legacy ~ ignoreRepositories_legacy ~ setRepository_legacy ~ addRepositories_legacy + modify CommandLine object to handle KIWIXMLRepositoryData objects instead of handle arrays of disconnected repository data + modify the command line processor (kiwi.pl) to create KIWIXMLRepositoryData objects + eliminate the repository processing from the changeset that is used to modify the boot description. The information is still in the changeset but is no longer considered
* Thu Mar 07 2013 msAATTsuse.de- fixed checks for already mounted system filesystems- fixed race condition in bindDiskPartitions, kpartx returns early and sometimes before the devices in /dev/mapper were created
* Wed Mar 06 2013 msAATTsuse.de- DB: rebuild documentation
* Wed Mar 06 2013 msAATTsuse.de- DB: update documentation; add missing image types
* Wed Mar 06 2013 msAATTsuse.de- moved from clicfs to overlayfs for 12.3 JeOS live iso
* Wed Mar 06 2013 msAATTsuse.de- added support for overlayfs for live images + requires kernel >= 3.7 (openSUSE >= 12.3) + activate with
* Wed Mar 06 2013 msAATTsuse.de- added SLED as possible target for kiwi --migrate (bnc #807469)
* Wed Mar 06 2013 msAATTsuse.de- added SLES-SP3 as possible target for kiwi --migrate (bnc #807469)
* Wed Mar 06 2013 msAATTsuse.de- DB: rebuild schema documentation
* Tue Mar 05 2013 msAATTsuse.de- fixed getOperatingSystemVersion() in KIWIMigrate. Use the /etc/products.d/baseproduct information to find the OS name
* Tue Mar 05 2013 rjschweiAATTsuse.de- rename the getImageType method on the KIWIXMLTypeData object The name had an unfortunate overlap with the same name on the XML class
* Tue Mar 05 2013 msAATTsuse.de- fixed oem-silent-install and oem-silent-verify options. They were not evaluated in __updateDescriptionFromChangeSet_legacy
* Tue Mar 05 2013 msAATTsuse.de- eliminate getImageVersion_legacy method from XML
* Tue Mar 05 2013 msAATTsuse.de- integrate KIWIImageBuilder approach better: + move __getBaseWorkingDir, __createWorkingDir, __cleanupWorkingDir and __getBaseWorkingDir into the KIWIContainerBuilder. They are specific to the creation of lxc containers + delete __provideResults from KIWIImageBuilder. what happens with the result belongs to KIWIImageCreator not to the plain builder + add __createBuildDir to the KIWIImageBuilder constructor. the creation of the intermediate build directory is done by the base class for all image builds. The result of the build is created there + integrate KIWIImageBuildFactory better into the KIWIImageCreator the first build is based on KIWIImageBuildFactory. If the image can\'t be build by this factory the image is build calling a creation function from the KIWIImage space. In the future more and more image creation code will be moved from KIWIImage to KIWIImageBuildFactory + format creation, build result archiving and move of result into user specified target directory applies to a successfull build no matter if it was done by the KIWIImageBuildFactory or by a image creation function from the KIWIImage space + adapt unit tests
* Tue Mar 05 2013 rjschweiAATTsuse.de- return an array ref from the createImage method + the array contains the files created by the builder. This will help us to eliminate the glob copy in the ImageCreator in the future
* Mon Mar 04 2013 msAATTsuse.de- make sure all USB host controller drivers will become included by mkinitrd (bnc #805053)
* Mon Mar 04 2013 msAATTsuse.de- DB: rebuild documentation
* Mon Mar 04 2013 msAATTsuse.de- if secure boot is enabled it\'s required to tell that in /etc/default/grub to make grub2-mkconfig produce correct results
* Sun Mar 03 2013 rjschweiAATTsuse.de- allow the user to hide the install and verify ncurses progress dialogs during OEM image installation, needed by Tyco (bnc #791291) + implement oem-silent-install and oem-silent-verify elements both are childeren of oemconfig
* Fri Mar 01 2013 msAATTsuse.de- fixed grub2 setup for older distros which packages into lib/grub2-efi
* Thu Feb 28 2013 msAATTsuse.de- fixed KIWILinuxRC::installBootLoaderGrub2() + install grub2 only in BIOS mode, in EFI mode this doesn\'t make sense + make sure the grub2 config file also lands on the EFI (fat) partition when in UEFI mode the precompiled and signed grub.efi image searches there for the configuration
* Wed Feb 27 2013 msAATTsuse.de- fixed UEFI bootloader setup for grub2 based disk images + fixed creation of image install CDs in EFI mode + call findAndCopyMagicBlock only if hybrid is requested
* Tue Feb 26 2013 rjschweiAATTsuse.de- implement support to build an image that runs as lxc container + add \"lxc\" as accepted value to image attribute + add container attribute to element, this attribute is required for container building + create consistency check for container type + must have container attribute + container attribute value must be composed of word characters + container build must include lxc packsge (runtime check) + unit tests + implement processing of new attributes in the XML code + unit tests- implement KIWIContainerConfigWriter + this class writes the configuration file and fstab file for a container + it is a child of KIWIConfigWriter + unit tests- implement KIWIConfigWriter + base class for configuration file writers, at present it only has the container writer as a child. This class will help us to separate the code for other image types that have configuration file (ovf, vmware, xen) and create individual classes that are focused on only one thing- implement KIWIConfigWriterFactory + factory class that hands out a
*ConfigWriter objects based on the image type or image format being built + unit tests- implement KIWIContainerBuilder + this class is responsible for the image creation for a container image only createImage is public and implements the creation procedure + is a child of KIWIImageBuilder + unit tests- implement KIWIImageBuilder + base class for all
*Builder classes, at present it only has the container builder as a child. This class will help us to peal apart the creation of various image types currently implemented in a tangle in KIWIImage and KIWIImageCreator- implement KIWIImageBuildFactory + factory class that hands out
*Builder objects based on the image type + unit tests- integrate the new build infrastructure code into the image creation process for lxc containers- add directory exist method to test case- create container example for openSUSE 12.3 and 12.2- examples + fix the text in the 12.3 examples to refer to 12.3, not 12.2 + all network configurations, 12.2 and 13.3, STARTMODE value \'onboot\' is no longer supported, changed to \'auto\'- add a chapter to the documentation providing information about the new container image type
* Tue Feb 26 2013 msAATTsuse.de- added network drivers and nfs stack to isoboot for openSUSE 12.3. This allows to boot live ISO\'s via pxe as explained in (bnc #805771)
* Tue Feb 26 2013 msAATTsuse.de- changed isofrom feature: + splitted information provided in isofrom into two parts isofrom_device= and isofrom_system= the two were set in common and seperated by a colon before. This caused trouble when the colon is part of the device information + added support for ISO from NFS (bnc #805771) isofrom_device=nfs::
* Tue Feb 26 2013 msAATTsuse.de- DB: rebuild documentation
* Tue Feb 26 2013 msAATTsuse.de- DB: update. wrote about the different union mount methods for pxe
* Mon Feb 25 2013 msAATTsuse.de- added vmxFlavour-uefi and xenFlavour-uefi profiles to the suse-SLE11-JeOS template image description. Given that SLE11 SP3 is used these profiles can be used to build UEFI images based on grub2
* Fri Feb 22 2013 msAATTsuse.de- fixed cleanMount function to work if $root dir can\'t be created. It might happen that at that point kiwi already mounted some stuff which can be released via cleanMount but cleanMount returned if no $root location was created.
* Fri Feb 22 2013 msAATTsuse.de- fixed creation of KIWICache object, was missing the xml pointer
* Fri Feb 22 2013 msAATTsuse.de- fixed default value for virtualHW version
* Thu Feb 21 2013 msAATTsuse.de- make sure the openSUSE 12.3 JeOS set the correct console based systemd target and fix some typos in config.sh too
* Thu Feb 21 2013 msAATTsuse.de- fixed default systemd target setup, baseSetRunlevel function a systemd target is not a number but something like multi-user.target or graphical.target
* Wed Feb 20 2013 adrianAATTsuse.de- fix iso creation for non-EFI medias again
* Wed Feb 20 2013 msAATTsuse.de- make sure GRUB_TERMINAL is set in etc/default grub to make yast bootloader happy. if yast can\'t find this setting it switches to \'console\' which deactivates the graphical grub2 console (bnc #804725)
* Wed Feb 20 2013 adrianAATTsuse.de- fix product media creation for non-x86_64 when EFI boot support is enabled (bnc #804428)
* Wed Feb 20 2013 msAATTsuse.de- fixed typo in function comment, still talking about opensusePattern instead of namedCollection
* Wed Feb 20 2013 msAATTsuse.de- move from opensusePattern to namedCollection in KIWIMigrate
* Wed Feb 20 2013 msAATTsuse.de- added missing setup of etc/sysconfig/bootloader setup for grub2- fixed possible duplicate entries for quiet and splash= in etc/default/grub
* Tue Feb 19 2013 msAATTsuse.de- KIWIISOLinux fixes: + added addBootEFILive magic block creation to the source media KIWICollect code too + extend magic block lookup in findAndCopyMagicBlock() from 2 to 8 files and from 4 to 8 blocks (bnc #804428)
* Tue Feb 19 2013 rjschweiAATTsuse.de- create a kiwi-test package + install the test code in the install directive + change permission on the test drivers to eliminate RPM lint warning + add filter to hide the test .kiwirc file warning
* Mon Feb 18 2013 msAATTsuse.de- fixed use of uninitialized value in KIWIConfigure
* Mon Feb 18 2013 msAATTsuse.de- switch back to firmware=\'bios\' and print a warning if uefi is requested on another than the x86_64 architecture. on SUSE we provide signed loaders and kernels for x86_64 only
* Mon Feb 18 2013 msAATTsuse.de- secure boot grub commands are linuxefi and initrdefi fix this also for oem disk images
* Mon Feb 18 2013 msAATTsuse.de- fixed building of i386-efi (32bit) live EFI iso images
* Mon Feb 18 2013 msAATTsuse.de- check for grub2 conf tool name before using it. with openSUSE 12.3 the grub2-efi-... tool chain was removed thus kiwi needs to check this before calling the mkconfig command
* Mon Feb 18 2013 msAATTsuse.de- better logging messages for framebuffer device setup and initrd creation for reboot of the system by either dracut or mkinitrd
* Sun Feb 17 2013 msAATTsuse.de- increased default boot partition size to 200MB (+50M) the plymouth splash data is huge. Just to give an example 12.2 SUSE plymouth theme data is ~3M, 12.3 SUSE plymouth theme data is about 23M. That blows up the initrd and needs more space on the boot partition
* Sun Feb 17 2013 msAATTsuse.de- make sure temporary config.lxc is removed after execution
* Sun Feb 17 2013 rjschweiAATTsuse.de- remove the and elements from the schema these elements are replaced by the new element- update all XML files to the latest schema version (5.7)
* Sun Feb 17 2013 msAATTsuse.de- EFI/UEFI fixes according to standard
* EFI/BOOT is required instead of efi/boot
* eltorito alternative loader path must be boot//efi
* secure boot grub commands are linuxefi and initrdefi
* check for 64bit or 32bit efi module
* Sun Feb 17 2013 msAATTsuse.de- KIWICollect install media package collector fixes
* pass all needed arguments to the KIWIIsoLinux constructor
* set logfile to terminal
* Sun Feb 17 2013 rjschweiAATTsuse.de- fix the openSUSE 12.3 examples, add module-init-tools to bootstrap package list
* Sun Feb 17 2013 rjschweiAATTsuse.de- use the localectl and datetimectl implementations provided by systemd to set the configuration + short circuit the suseConfig function in the shell code if localectl exists + implement the configuration in Perl code, now all configuration settings are implemented in the same class + remove the call to suseConfig in the config.sh files of our examples- clean up the KIWIConfigure implementation to critic level 3- add deprecation message to the old implementation
* Fri Feb 15 2013 msAATTsuse.de- systemd related fixes causing the first boot to hang
* setupConsole should not run at all in case of systemd
* systemd has been moved to /usr/lib/systemd/systemd thus /bin/systemd is now a link and that causes several bash test calls to fail
* quit plymouth inside the initrd if the system image doesn\'t have plymouth installed
* make debugging plymouth problems more easy by evaluating the options plymouth.enable and/or rd.plymouth like the mkinitrd scripts does it
* Fri Feb 15 2013 msAATTsuse.de- systemd has been moved to /usr/lib/systemd with openSUSE 12.3 thus the function baseSetRunlevel() needs to address old and new location
* Fri Feb 15 2013 rjschweiAATTsuse.de- remove the getImageName_legacy method from the code base
* Thu Feb 14 2013 rjschweiAATTsuse.de- add critic exception for the _new_instance private method in all singletons. + The method is called from the base class only and thus does not appear to be called when perlcritic parses the code.- convert the Locator to a singleton + the locator holds no state and we really only need one per kiwi invocation
* Wed Feb 13 2013 msAATTsuse.de- don\'t trigger udev device creation in pre-init. All devices are already there due to the initial start of udev. This could cause a hangup on first boot of the appliance
* Tue Feb 12 2013 msAATTsuse.de- don\'t rely on boot.device-mapper init script, load device mapper module manually when needed
* Tue Feb 12 2013 msAATTsuse.de- fixed start/stop of udev in pre-init. while using sysV init it was possible to run a startup script without a running init process. With systemd you cannot really run a service when systemd does not run
* Tue Feb 12 2013 msAATTsuse.de- fixed corrupted fbiterm fonts for openSUSE 12.3 (bnc #803276)
* Tue Feb 12 2013 rjschweiAATTsuse.de- implement writeXML method in XML class + write an xml file based on the data in the data structure- do not write data to the generated XML if a default value was set programmatically- add a \"namedCollection\" element to the XML + this is in preparation for the removal of opensusePattern and rhelGroup + the KIWIXMLPackageCollection class already writes the element as there is no way to differentiate one collection from the other vs. . Therefore, the schema has to support the new element name prior to the old collection names being removed.- alpha sort the element declarations in the schema + benign change, but it aides XML code development- kiwi now depends on File::Slurp- implement a writeTest script that can be used to verify that round tripping of XML data works- create a sample config.xml file for round trip testing
* Tue Feb 12 2013 msAATTsuse.de- use global variable kernel_cmdline to store paramters passed to the linuxrc/init script and don\'t hand them over via sub-functions
* Tue Feb 12 2013 msAATTsuse.de- suppress cpio blocks message to stderr
* Sat Feb 09 2013 msAATTsuse.de- ignore empty directories in the migration report. the migrate code checks the unmanaged directories and remove them from the data hash if they are empty on the system. Additionally the path which ends up in an empty directory is searched backwards to find other empty directories in the unmanaged data hash which appears due to the removal of deeper empty directories
* Fri Feb 08 2013 msAATTsuse.de- use mcopy to create efi structure in vfat image.
* Fri Feb 08 2013 msAATTsuse.de- increased the vfat container image to be big enough to hold additional efi modules like the shim
* Fri Feb 08 2013 msAATTsuse.de- fixed import of shim and grub efi modules. They are packaged as links to usr/lib/grub2/xxx-efi thus moving data from this directory will destroy the link target. We\'d better copy it- also allow integration of shim-opensuse key. If no Microsoft signed key is present we check if an opensuse key exists
* Fri Feb 08 2013 msAATTsuse.de- make sure shim package is part of the boot image for iso vmx and oem image types starting with openSUSE >= 12.3. The sim package contains the Microsoft signed efi module which is the entry point for UEFI secure boot
* Fri Feb 08 2013 rjschweiAATTsuse.de- improved genDevDoc script:
* improve the file processing routine, use only one loop
* general code cleanliness improvements
* implement DAG generation
* Thu Feb 07 2013 msAATTsuse.de- fixed search path for UEFI signed shim.efi and grub.efi
* Thu Feb 07 2013 msAATTsuse.de- added support for D3 data visualisation for custom files in kiwi migration report. The report shows a nice collapsable tree view of the unmanaged files/directories
* Thu Feb 07 2013 msAATTsuse.de- print warning if installed isohybrid does not support EFI
* Thu Feb 07 2013 msAATTsuse.de- search for the grub2 mkimage tool. the tool has been renamed in openSUSE 12.3 thus we have to find it and can\'t rely on the name
* Thu Feb 07 2013 msAATTsuse.de- make sure module-init-tools is part of the bootstrap list for openSUSE 12.3 images. Otherwise kmod-compat ist installed which is incompatible with the kernel packages and causes a zypper provides error
* Wed Feb 06 2013 msAATTsuse.de- fixed search path for grub2 EFI modules. in openSUSE 12.2 grub2-efi was packaged in a way that the modules were installed to /usr/lib/grub2-efi/x86_64-efi. In openSUSE 12.3 the packaging has changed and the modules are now installed to /usr/lib/grub2/x86_64-efi, really a brilliant idea
* Wed Feb 06 2013 msAATTsuse.de- fixed repo setup in KIWIXMLInfo mode, the code there still needs the setRepository_legacy() call
* Wed Feb 06 2013 msAATTsuse.de- fixed call to undefined function setGlobals(). This was renamed into setKiwiConfigData()
* Wed Feb 06 2013 msAATTsuse.de- make sure KIWIMigrate writes latest version of the XML schema
* Wed Feb 06 2013 msAATTsuse.de- remove autoyastClone function/feature from KIWIMigrate this feature did not work well and it\'s also not maintained by yast at the moment
* Wed Feb 06 2013 msAATTsuse.de- fixed use of uninitialized value in KIWIMigrate
* Wed Feb 06 2013 msAATTsuse.de- added function createCustomHybridPersistent() which allows to provide the cmdline variable \'kiwi_cowfile=device:/path/to/cowfile\' If kiwi get this information it uses the file as container for persistent writing for hybrid iso images. If this information is not present the standard case applies, which is kiwi tries to create a new partition device for persistent writing. In combination with the isofrom feature the kiwi_cowfile approach is useful
* Tue Feb 05 2013 rjschweiAATTsuse.de- generate KIWI Class API documentation and cross references
* Tue Feb 05 2013 msAATTsuse.de- v5.05.01 released
* Tue Feb 05 2013 msAATTsuse.de- DB: rebuild documentation for version change
* Tue Feb 05 2013 msAATTsuse.de- netboot: following is required for (fate #314413) and (fate #314414) + add support for SERVERTYPE=local for fetchFile and putFile. the SERVER variable then points to a local directory + use locally cached MD5 file if it has the same checksum as the remote file, this is enabled by setting KIWI_LOCAL_CACHE_DIR Setting of these variables will be handled in SLEPOS specific hooks.
* Tue Feb 05 2013 msAATTsuse.de- v5.04.38 released
* Tue Feb 05 2013 msAATTsuse.de- fixed use of uninitialized value in setupBTRFS
* Tue Feb 05 2013 msAATTsuse.de- use ext4 filesystem for clic\'ed live iso\'s
* Tue Feb 05 2013 msAATTsuse.de- use grub2 as bootloader for xen on openSUSE 12.2 JeOS too
* Tue Feb 05 2013 msAATTsuse.de- fixed return value of KIWIImageFormat::createFormat. If no format is specified, e.g on xen we need only the format configuration, this is just a warning, thus the return value of the function should not indicate an error
* Tue Feb 05 2013 msAATTsuse.de- fixed update of machine section in case of a xen dom0 setup the vmdisk entry is mandatory now thus the section has to provide it
* Tue Feb 05 2013 msAATTsuse.de- fixed setup of build type in KIWIXML constructor. While testing I found that e.g the format conversion failed because there was no machine section found. But for the selected type and profile there was a machine section specified. The KIWIXML::setBuildType function was never called thus the default type applies which was of type iso and there no machine section existed.
* Tue Feb 05 2013 msAATTsuse.de- fixed use of uninitialized values in KIWIBoot.pm while in kiwi\'s format conversion mode
* Tue Feb 05 2013 msAATTsuse.de- added \'skipit\' to the list of supported archs. I\'m a bit unhappy with this change but I didn\'t see a better way to fix the arch check. In fact \'skipit\' is not an architecture but for product building this architecture flag is used to indicate noarch rpm packages. In kiwi we check all arch values by one function KIWIXMLFileData::__isSupportedArch(), thus \'skipit\' needs to be part of the list. The more clean fix would be to have two arch checking functions one for image building (real arch check) and one for product building (DVD source media). In order to keep the risk of regressions low I decided for the fast and easy way but we should have in mind that we can do better here.
* Tue Feb 05 2013 msAATTsuse.de- make sure dbus machine-id is unique
* Mon Feb 04 2013 msAATTsuse.de- update failsafe options (bnc #801973)
* Mon Feb 04 2013 msAATTsuse.de- fixed search and call code for editbootconfig and editbootinstall evaluation when building iso images, live and install media
* Mon Feb 04 2013 rjschweiAATTsuse.de- fix the message for the init argument hash presence + the log facility is a singleton and is no longer passed as argument, thus the initialization hash argument is always expected as the first argument.
* Mon Feb 04 2013 rjschweiAATTsuse.de- remove unused code + getTypes_legacy method was no longer called
* Mon Feb 04 2013 msAATTsuse.de- fix architecture handling for ProductPackages, allow a comma separated list of architectures also in the runtime checker function __isSupportedArch()
* Mon Feb 04 2013 rjschweiAATTsuse.de- add trigger for schema changes + run all tests that use an xml file when the schema changes
* Mon Feb 04 2013 msAATTsuse.de- check for the existence of a the service file before activating/deactivating a systemd service
* Mon Feb 04 2013 msAATTsuse.de- fixed creation of KIWI
* instances in KIWICollect
* Sun Feb 03 2013 msAATTsuse.de- fixed KIWICollect constructor. The code there did not make use of the singleton KIWILog object and still expects the first parameter to be the log reference
* Sun Feb 03 2013 rjschweiAATTsuse.de- implement getBootImageDescription method in locator + will eventually replace normalizeBootPath in KIWIURL. Implement search hierarchy for boot image description search that is more easily understood by users.- implement unit tests for new functionality
* Fri Feb 01 2013 rjschweiAATTsuse.de- eliminate getOVFConfig_legacy- remove des_cpu and des_memory attributes + des_cpu == ncpus and des_memory == memory we do not need 2 attributes to describe the same value + fix typo of ovfformat name, it is \"powervm\" not \"povervm\" + the schema version did NOT change thus users must fix the config file manually if they used \"des_cpu\", \"des_memory\", and \"povervm\"- implement writing of configured information into the .ovf configuration file + memory and limits + cpu and limits + devices- fix link bug + the image file in the .ovf directoy was a dangling link as the link created was not pointing to the proper location- update the tests to account for the removed attributes- fix typo in method name \"...Machine...\" not \"...Maschine...\"
* Fri Feb 01 2013 msAATTsuse.de- clean up the kiwi debug mode which collects trace information about the perl caller stack. There is now a singleton module called KIWITrace which stores the backtrace. Thus this also removes the last main:: global variables from the kiwi space
* Fri Feb 01 2013 msAATTsuse.de- follow up fix for the use vs. require change in the Singleton objects KIWILog and KIWIGlobals. If one of the modules included by require contains a use statement of the Singleton object we again got warnings about redefined functions
* Thu Jan 31 2013 rjschweiAATTsuse.de- eliminate getVMwareConfig_legacy + incorporate default setting for guestOS into XMLVMachineData + drop all other mappings for guestOS, this is the user\'s responsibility- fix VMWare NIC setup bug + previously the generated config file (.vmx) did not contain information about the specified MAC address. The MAC was always set to \"generated\" ignoring the user specified data.
* Thu Jan 31 2013 rjschweiAATTsuse.de- use require instead of use to include other modules in the Singleton classes. when using the \"use\" syntax for modules the perl compiler interrupts the compilation of the current module and starts compiling the module declared in the use statement. If the included module then includes the singleton perl issues \'Subroutine foo redefined\' messages. As the compilation of of the original module was interrupted it is not finished and thus not recorded in the lookup table. Delaying the loading to runtime with the require function avoids the warning.
* Thu Jan 31 2013 msAATTsuse.de- v5.04.37 released
* Thu Jan 31 2013 msAATTsuse.de- fixed __checkVMscsiCapable() runtime check, it\'s ok to have no machine section. That one broke the containment builds for SUSE Studio
* Thu Jan 31 2013 msAATTsuse.de- v5.04.36 released
* Wed Jan 30 2013 msAATTsuse.de- v5.04.35 released
* Wed Jan 30 2013 msAATTsuse.de- fixed creation of JSON tree in KIWIMigrate
* Wed Jan 30 2013 rjschweiAATTsuse.de- fix the isohybrid checks + previous implementation did not properly account for conditions that trigger the isohybrid code path + add error condition for architectures that do not support the creation of iso hybrids + update the tests accordingly
* Wed Jan 30 2013 msAATTsuse.de- worked on the visualization of unmanaged data in KIWIMigrate. I\'d like to use the d3 visualization framework and that requires the data as JSON data structure. I implemented a method to create that information but ran into JSON max nesting level problems
* Wed Jan 30 2013 msAATTsuse.de- partially revert (eff68ab8de60). The fstool runtime is ok just the test case XML in liveIsoImg/efiOEM/config.xml would force the xfs tools to be installed which I think is not really necessary for this test
* Wed Jan 30 2013 msAATTsuse.de- v5.04.34 released
* Wed Jan 30 2013 msAATTsuse.de- fixed use of undefined value in writeImageConfig
* Wed Jan 30 2013 msAATTsuse.de- I removed the runtime check for xfs and reiserfs. reiserfs is more or less dead and xfs is a pure optional filesystem. If we have a mandatory check for xfs kiwi has to require the tools package on the package and on the build level which I think is not required. imho it would also be better to change the fstool runtime check to check only for the selected filesystem and not the complete list. We cannot expect our users to install all filesystem tools
* Wed Jan 30 2013 rjschweiAATTsuse.de- build require e2fsprogs to allow unit tests to pass
* Tue Jan 29 2013 rjschweiAATTsuse.de- remove the getRPM
*_legacy methods use the new API
* Tue Jan 29 2013 rjschweiAATTsuse.de- only require the uefi isohybrid command line option when building a EFI/UEFI iso + at present the uefi command line option on the isohybrid executable is treated as mandatory. This breaks all ISO builds on systems that do not have the latest isohybrid tool even if the ISO to be created is not designated as an efi/uefi ISO via the firmware attribute. The changes treat the uefi command line option as optional. A runtime check ensures that kiwi exits if the uefi command line option is required and the tool does not support it.- new runtime check and test cases
* Tue Jan 29 2013 msAATTsuse.de- fixed firmware check to allow uefi as well
* Tue Jan 29 2013 msAATTsuse.de- grubcd.efi has been moved to grub.efi in the latest grub2 packages. Thus we have to follow the change
* Mon Jan 28 2013 msAATTsuse.de- some cleanup in KIWIMigrate.pm, tested d3 data visualization
* Mon Jan 28 2013 rjschweiAATTsuse.de- make KIWIGlobals a singleton + eliminates another package variable in kiwi.pl + add the singleton to the doc + allows us to make the remainaing test cases packages, now critic 2 clean- rename methods getGlobals and setGlobals + reflect in name the data that is being returned/set getKiwiConfig, setKiwiConfigData- some general code consistency clean up
* Mon Jan 28 2013 msAATTsuse.de- v5.04.33 released
* Mon Jan 28 2013 msAATTsuse.de- added support for firmware=\"uefi\" attribute. In contrast to the standard firmware=\"efi\" support, kiwi will not create its own efi boot images but uses the shim and the signed bootloader modules as they are provided by the packages.
* Sun Jan 27 2013 rjschweiAATTsuse.de- Implement KIWIXMLPXEDeployConfigData + supports multiple declarations of + remove confArch, confDest, and confSource from KIWIXMLPXEDeployData and encapsulate in this new object- Integrate KIWIXMLPXEDeployConfigData into XML + hold array of KIWIXMLPXEDeployConfigData and enforce child relationship to KIWIXMLPXEDeployData indirectly- Implement proper default processing for partition definitions in KIWIXMLPXEDeployData + previously the default setting were applied in the XML in the old data model. In the new data model all default are known only to the type encapsulating the data- Eliminate all
*PXEDeploy
*_legacy methods from XML class + update client code to use new data model provided objects- Eliminate all calls to _legacy in the PXE image creation code path- Implement new tests and update existing tests as necessary + new tests for new class + update tests for default values + new tests for default settings + eliminate _legacy tests for PXEDeploy
* Sun Jan 27 2013 msAATTsuse.de- fixed hybrid iso search to respect partition devices and prefer them over the entire disk device. Additionally don\'t set a loop on the found device anymore which was used to workaround the busy state set by the kernel.
* Sat Jan 26 2013 msAATTsuse.de- fixed use of undefined value as an ARRAY reference in KIWIXML::getUsers() method
* Sat Jan 26 2013 msAATTsuse.de- make grub2 search more robust by searching for a flag file named like the unique ID used in the ISO header or MBR. This completes (bnc #799488)
* Sat Jan 26 2013 msAATTsuse.de- make sure grub2/grub2-efi are part of the isoboot initrd
* Fri Jan 25 2013 msAATTsuse.de- fixed grub2 prefix and root variable setup (bnc #799488)- fixed layout of iso\'s and also make sure fixCatalog() is called
* Fri Jan 25 2013 msAATTsuse.de- enhanced isohybrid call to know about --uefi option. Creating an EFI capable hybrid iso requires the new isohybrid tool including patches by Steffen Winterfeldt as well as a correctly prepared ISO to write the information. This commit is only about calling isohybrid whereas the last commits was about preparation of the iso itself
* Fri Jan 25 2013 rjschweiAATTsuse.de- Remove getEc2Config_legacy method from XML + Change client code to use new getEC2Config method and work with the returned EC2ConfigData object- Change getDisplayName implementation in XML + Use data from the new data structure to return the name- Reorder some operations in the EC2 image creation step + Facilitate early exit by first checking the architecture + Eliminate all _lgacy calls from this code path + Move variable initialization closer to the place where the values are used + Handle all AWS account stuff towards the end of the method, when we need the information, as this is not treated as an error anyway- Fix link in documentation + The repo for the EC2 tools moved from Virtualization:/Cloud to Cloud:/
* Thu Jan 24 2013 rjschweiAATTsuse.de- support the profiles attribute for user definitions at the \"group\" level (bnc #77152)
* implement new tests
* update consistency checks
* Thu Jan 24 2013 msAATTsuse.de- added the firmware type \'vboot\' to support creation of images for arm based boards using google\'s chrome OS boot style
* Wed Jan 23 2013 msAATTsuse.de- prepare ISO images in a way that allows hybrid ISO\'s which boot via EFI. There is some magic involved here and we are still not there. In order to make it work it\'s required to have two iso meta data blocks whereas one is used as real iso header providing boot entries for syslinux and efi-boot as well as the optional legacy bios based partition table for hybrids and the other one is used to place a gpt partition table to allow this iso to be seen as a disk when booting it as disk over EFI
* Wed Jan 23 2013 msAATTsuse.de- removed support for openSUSE 11.4
* Wed Jan 23 2013 msAATTsuse.de- added support for openSUSE 12.3
* Wed Jan 23 2013 rjschweiAATTsuse.de- update the extra examples + support 12.2 and 12.3 + remove 11.4 + add min-gnome as SLES example
* Tue Jan 22 2013 rjschweiAATTsuse.de- fix the UserData tests broken by previous update adding merge code
* Tue Jan 22 2013 rjschweiAATTsuse.de- implement a merge method that supports the merge of user data
* Tue Jan 22 2013 msAATTsuse.de- added support for EFI in live ISO images. In order to create a syslinux plus EFI (grub2) live ISO use the following type hybrid support for EFI live ISO\'s requires the new isohybrid tool which could also write a gpt into the isoheader.
* Mon Jan 21 2013 rjschweiAATTsuse.de- fix architecture handling for ProductPackages, allow a comma separated list of architectures
* Mon Jan 21 2013 msAATTsuse.de- removed __checkNoProfsBootstrapPackages check. It\'s allowed to have profiles specified in the bootstrap packages. There are image descriptions which installs the entire system by bootstrap packages. Reason for this is if the packagemanager in the image is not compatible to the implementation in kiwi e.g SLE10. Other than that we officially support bootstrap only installation including all features of \'image\' typed package sections.
* Mon Jan 21 2013 rjschweiAATTsuse.de- allow archives in the bootsrap section to allow build of images of older distributions
* Sun Jan 20 2013 msAATTsuse.de- fixed use of sat solvable functions due to the Singleton log class changes. There were still some functions calls left which passes the $kiwi log object to the functions
* Sun Jan 20 2013 msAATTsuse.de- Due to the new Singleton log class and the fix in KIWIQX to make use of it, all EXEC calls now lands in the logInfoMsg type of unit test framework. Thus I changed the ktLog.pm::loginfo function in the unit test functions to ignore EXEC loginfo messages and allow the unit tests to work again
* Sun Jan 20 2013 msAATTsuse.de- fixed $main::kiwi accesses according to new Singleton log class- fixed KIWIQX command execution logging with new Singleton log class- fixed object instantiation of KIWIXMLRepositoryData due to new Singleton based log object class
* Sun Jan 20 2013 rjschweiAATTsuse.de- implement new consistency checks + do not allow the assignment of a group ID to known system groups + do not allow the profiles attribute on a section marked as bootstrap + do not allow the use of archives in a section marked as bootstrap + ensure the interface is unique within one definition + ensure the MAC is unique within one definition
* Fri Jan 18 2013 rjschweiAATTsuse.de- eliminate the getUsers_legacy method
* Fri Jan 18 2013 msAATTsuse.de- fixed wrong filesystem label for the efi jump partition. According to the EFI spec it should be EFI not BOOT- fixed the boot partition setup in case of an EFI system. kiwi checks the filesystem type of the jump partition and not the boot partition which leads to a missing boot -> . link on the boot partition which then prevents the grub2 efi core image to find the grub.cfg file
* Fri Jan 18 2013 msAATTsuse.de- DB: rebuild documentation
* Fri Jan 18 2013 tom_schrAATTsuse.de- DB: Moved definition of PXE as the first sentence- DB: Removed linebreak after and before to avoid layout problems
* Thu Jan 17 2013 rjschweiAATTsuse.de- turn the logger (KIWILog) into a Singleton + eliminates the first argument for every constructor + enforces less sloppy testing code for log message checking- add the logger to the design diagram as a singleton- start over all design write up
* Wed Jan 16 2013 rjschweiAATTsuse.de- eliminate some calls to _legacy methods- moved some \"old\" accessors to _legacy in XML KIWIXMLInfo => getInstallSize_legacy KIWIXML => getImageVersion_legacy KIWIXML => getImageName_legacy
* Tue Jan 15 2013 msAATTsuse.de- DB: rebuild documentation
* Tue Jan 15 2013 msAATTsuse.de- DB: add documentation about new post hook commands
* Tue Jan 15 2013 msAATTsuse.de- added support for post hook commands as requested in (bnc #776535)
* Mon Jan 14 2013 msAATTsuse.de- v5.04.32 released
* Mon Jan 14 2013 msAATTsuse.de- fixed netboot boot partition setup. In case of a custom boot partition the code created the partition and the filesystem but the original data from the image was not moved over to the boot partition
* Mon Jan 14 2013 msAATTsuse.de- fixed updateOtherDeviceFstab to add devices by disk ID
* Mon Jan 14 2013 msAATTsuse.de- fixed use of IFS in probeNetworkCard and loadNetworkCard- try to load hwinfo detected network modules in loadNetworkCard but don\'t fail if there are none detected or the load failed. udev normally loads the modules correctly- ask interfaces for their MAC and IFace name directly instead of using hwinfo, that\'s faster and more reliable
* Mon Jan 14 2013 rjschweiAATTsuse.de- update XMLVMachineData class to reflect mandatory status of configuration setting in XML. Previously the element was optional and it was possible to construct the VMachine object without arguments. Now the element is mandatory and thus the object may no longer be constructed without argument.
* Sun Jan 13 2013 msAATTsuse.de- make vmdisk a mandatory element in the machine section
* Sat Jan 12 2013 msAATTsuse.de- fixed dom0 machine setup to make object init of KIWIXMLVMachineData happy
* Sat Jan 12 2013 msAATTsuse.de- added oem-swap for all examples which specify a swapsize
* Sat Jan 12 2013 msAATTsuse.de- fixed indention, obsolete curly braces from information about the structure of the internal XML data types
* Sat Jan 12 2013 rjschweiAATTsuse.de- store objects in XML instead of raw data + change the XML class such that objects are stored instead of deeply nested raw data. This results ins simplification of code, the internal data structure, and its documentation. Data that requires merging (preferences and user data) is not stored as objects as it is not obvious that merge delegation to the respective objects would be advantageous.
* Fri Jan 11 2013 rjschweiAATTsuse.de- fix the description + RuntimeChecker test failed due to conflicting settings in the config
* Fri Jan 11 2013 rjschweiAATTsuse.de- fix XMLDescriptionData + previously the object construction did not conform to requierements of the Schema, it was possible to create an object without author, contact, or specification data. Multiple contact definitions were ignored- update unit tests for Description class and XML class
* Fri Jan 11 2013 msAATTsuse.de- fixed indention
* Fri Jan 11 2013 msAATTsuse.de- update 12.2 examples to use grub2 as bootloader
* Fri Jan 11 2013 msAATTsuse.de- moved the os-autoinst test case from the 11.4 JeOS template into the SLE11 template. The 11.4 template will be removed with the next openSUSE 12.3 distribution but I don\'t want to loose this test case example
* Thu Jan 10 2013 msAATTsuse.de- changed zypper call to use one call to install products, patterns and packages instead of splitting that up into single calls. This has the advantage that zypper can better decide for packages which provides similar functionality (bnc #796062)
* Wed Jan 09 2013 msAATTsuse.de- update internal data structure in-code documentation
* Tue Jan 08 2013 msAATTsuse.de- fixed \'run out of space\' problem in LVM setup. use a relative 20% (min 30M) spare space per volume
* Tue Jan 08 2013 msAATTsuse.de- fixed LANG setup inside the kiwi initrd. LANG must be correctly set before calling fbiterm. Otherwise the multibyte characters in the target locale are not displayed correctly
* Thu Jan 03 2013 rjschweiAATTsuse.de- Start documenting the KIWI design + document the new XML design + start of high level data-flow/interaction diagram
* Fri Dec 21 2012 msAATTsuse.de- added support for resizeMDRaid in kiwi\'s oemboot code when the geometry of the disk changes the raid array needs to grow too
* Fri Dec 21 2012 msAATTsuse.de- fixed mdraid setup in combination with LVM
* Fri Dec 21 2012 msAATTsuse.de- added zeroMDRaidSuperBlock function to make sure an old raid array is stopped and the super block is removed prior to installing a new system on that disk
* Fri Dec 21 2012 rjschweiAATTsuse.de- deal with mdraid in the test + fix getXMLElement test + add unit test for new MDRaid methods
* Fri Dec 21 2012 msAATTsuse.de- removed duplicate rt profile
* Wed Dec 19 2012 msAATTsuse.de- added support for software raid into disk based appliances The feature is based on creating a degraded raid array with one disk, thus only mirroring and striping levels can be supported. A system build with a degraded raid array allows to add custom disks later to the array. In order to set it up you only need to specify the mdraid attribute as part of the type like the following example:
* Wed Dec 19 2012 msAATTsuse.de- removed redundant code from setupInstallCD, this is done in the KIWIBoot constructor
* Wed Dec 19 2012 msAATTsuse.de- fixed grub2 title setup, spaces were ignored
* Fri Dec 14 2012 msAATTsuse.de- v5.04.31 released
* Fri Dec 14 2012 msAATTsuse.de- added support for the apt-get/dpkg package manager to kiwi
* Thu Dec 13 2012 rjschweiAATTsuse.de- allow the id for a vmdisk and vmdvd to be 0 trapped again by Perl\'s a string with zero (\"0\") is false
* Thu Dec 13 2012 msAATTsuse.de- update templates and examples to match the schema
* Thu Dec 13 2012 msAATTsuse.de- fixed the change of the pwd attribute to be really complete also fixed the 5.5 to 5.6 upgrade xsl style sheet
* Wed Dec 12 2012 msAATTsuse.de- update templates and examples to latest schema version
* Wed Dec 12 2012 msAATTsuse.de- split up KIWIManager object into a base class and the corresponding manager sub classes for zypper, ensconce yum and smart
* Wed Dec 12 2012 rjschweiAATTsuse.de- clean up + eliminate references to Novell where possible + change copyrights from Novell Inc. to SUSE LLC + fix spelling OpenSUSE is openSUSE + update e-mail address rschweikertAATTnovell.com to rjschweiAATTsuse.com
* Tue Dec 11 2012 rjschweiAATTsuse.de- implement InstRepositoryData class + stores data for element + implement RepositoryBaseData class as parent class to share common functionality with RepositoryClass + implement unit tests- some clean up for consistency in the RepositoryData class + update unit test- implement ProductPackageData class + stores data for element + did not implement set
* methods as it is not obvious at this time if they are needed- follow up from addition of attributes to for apt support + set the class members + check the argument for the set
* methods + add unit tests for all new methods- implement ProductOptionsData class + stores data for element + implement unit tests- implement ProductArchitectureData class + stores data for element + implement unit tests- implement ProductMetaFileData class + stores data for element + implement unit tests + some style clean up in File and Type test- implement ProductMetaChrootData class + stores data for element + implement unit tests- integrate all classes related to handling into XML processing code + implement new accessor methods + renames all getInstSource
* and related methods to _legacy + update client code to use _legacy names + implement unit tests
* Tue Dec 11 2012 rjschweiAATTsuse.de- change the pwd attribute of the instrepo element to password + be consistent with the attribute name for the repository password between the instrepo and repository element- bump the schema version to 5.6- implement a 5.5 to 5.6 upgrade style sheet
* Sat Dec 08 2012 msAATTsuse.de- make sure plymouth splash is switched off when the progress dialog is displayed in the oemboot/suse-dump code (bnc #793260)
* Fri Dec 07 2012 msAATTsuse.de- v5.04.30 released
* Fri Dec 07 2012 msAATTsuse.de- fixed changelog filter tool to incorporate commits with the same timestamp into one changelog entry
* Fri Dec 07 2012 rjschweiAATTsuse.de- Add tests for the new firmware attribute handling- Additional changes to new firmware handling in the Type object + Encode the firmware type default (bios) + Verify that the given value is supported
* Fri Dec 07 2012 msAATTsuse.de- v5.04.29 released
* Fri Dec 07 2012 msAATTsuse.de- add grub2-efi by default to openSUSE 12.2 oem|vmxboot descriptions. Thus just selecting the firmware via is enough
* Fri Dec 07 2012 msAATTsuse.de- added support for the firmware=\"bios|efi\" type attribute before this patch the decision for efi was done by the presence of the grub2 efi modules inside the kiwi generated initrd. This has turned out to be not flexible and can\'t be extended to the firmware required disk layout on other architectures like the arm based chromebook to mention just one example This fixes (bnc #792917)
* Fri Dec 07 2012 msAATTsuse.de- we should not overwrite the user specified target directory in the commandline object with something the user did not set. With reference to commit:b6a7e563 the creation of the image happened in a subdirectory below the specified target directory and kiwi overwrote that user target directory with a new name. This should not happen thus I added a new function pair named setImageIntermediateTargetDir/getImageIntermediateTargetDir to handle that value and don\'t touch the user specified target directory
* Thu Dec 06 2012 msAATTsuse.de- finally changed the fragile cleanup code in KIWIBoot.pm The code there now builds a stack of commands which set the busy devices free if processed in reverse order
* Thu Dec 06 2012 praveen_paladuguAATTsuse.de- make sure rhelStripInitrd arguments are passed correctly
* Thu Dec 06 2012 rneuhauserAATTsuse.de- use mktemp -t to make use of $TMPDIR and do not hardcode /tmp in the paramter to mktemp
* Thu Dec 06 2012 msAATTsuse.de- Don\'t use the same inode count for the install stick disk compared to the system image disk. If the system image is big the inode count is also a big number. But on the install disk image there are only a few files including the compressed version of the system image. Thus it\'s smaller and has not much files. The system image inode count has no relation to the filesystem on the install disk image. Under certain circumstances it could happen that the install disk filesystem can\'t be created because the big chunk of inodes exceeds the size of the install disk filesystem
* Wed Dec 05 2012 praveen_paladuguAATTsuse.de- Fedora/RHEL based distros have dhclient instead of dhcpcd. Thus the code to ask the DHCP server for an address has been splitted into two new functions setupNetworkDHCPCD() and setupNetworkDHCLIENT()
* Tue Dec 04 2012 msAATTsuse.de- make sure pidof returns only the master pid of udevd
* Tue Dec 04 2012 msAATTsuse.de- make sure the splash information doesn\'t get lost when repacking the initrd while building live iso images
* Tue Dec 04 2012 msAATTsuse.de- fixed behavior of /etc/init.d/boot.clock which reads a value in /dev/shm/warpclock. The value is provided by a mkinitrd binary in /lib/mkinitrd/bin/warpclock. It looks like it\'s required to store that information for a proper localtime system clock setup. There is not good documentation about this magic but to stay compatible the warpclock code from mkinitrd was ported over to the kiwi first boot initrd This fixes (bnc #786730)
* Tue Dec 04 2012 adrianAATTsuse.de- instsource: use supportstatus from product descriptions instead from PDB (Package Data Base)
* Tue Dec 04 2012 adrianAATTsuse.de- instsource: avoid usage of translate_packages code, use create_package_descr code (patch by rudi)
* Mon Dec 03 2012 msAATTsuse.de- don\'t point stdout to stderr when calling grub2-mkconfig with stdout I/O redirection into the configuration file. This just leads to an empty file. I should think twice before hitting the push button ;)
* Mon Dec 03 2012 msAATTsuse.de- workaround a grub2-mkconfig bug which happens if a \' sign is used as menuentry title in /etc/default/grub. if called with the option -o grub2-mkconfig complains even if the shell quoting is perfectly fine. Strange enough it works nicely if called as grub2-mkconfig > some-file. As this is only a small and maintainable workaround I applied it
* Mon Dec 03 2012 msAATTsuse.de- added an architecture check for KIWIIsoLinux::createHybrid() on architectures e.g ppc and ia64 the embedding of a partition table into the ISO will not work. Thus the check will issue a warning but proceed and does not fail
* Mon Dec 03 2012 msAATTsuse.de- fixed 64bit path check for lxc base directory
* Sun Dec 02 2012 rjschweiAATTsuse.de- Implement XMLExceptData class to store data of the element- Modify the get
* methods of the XMLSplitData class to return array refs of FileData and ExceptData objects
* this was necessary to avoid duplication of XML generation code across class implementations
* this behavior is now also consistent with other get
* methods when accessing complex data- Implement getXMLElement method for all XML
*Data classes
* getXML method returns 1 XML element that represents the data of the class- Update unit tests as needed
* Fri Nov 30 2012 rjschweiAATTsuse.de- implement consistency check to disallow boot to be setup as a volume in (LVM) configuration- implement unit tests to verify test
* Fri Nov 30 2012 msAATTsuse.de- v5.04.28 released
* Fri Nov 30 2012 msAATTsuse.de- removed obsolete and also never reached code
* Fri Nov 30 2012 msAATTsuse.de- fixed user/group setup. kiwi used the given group name as a supplementary group and not as the main group this user belongs to. Together with a group name and a group id which matches that group name this could lead to duplicate user views in e.g YaST and to basically wrong user configuration (bnc #792058)
* Fri Nov 30 2012 rjschweiAATTsuse.de- implement handling of additive and unit attributes of the element in the imageConfig data structure and the XMLTypeData class rename the following methods of the XML class:
* getImageSize => getImageSize_legacy
* getImageSizeAdditiveBytes => getImageSizeAdditiveBytes_legacy
* getImageSizeBytes => getImageSizeBytes_legacy
* Thu Nov 29 2012 msAATTsuse.de- fixed legacy grub setup. the partition numbers starts at 0 here
* Thu Nov 29 2012 msAATTsuse.de- fixed shell escaping for grub.cfg and /etc/default/grub- also fixed importFile method to handle single quotes correctly
* Wed Nov 28 2012 rjschweiAATTsuse.de- implement data handling in new XML data structure- rename the following methods:
* updateTypeList -> __updateTypeList_legacy
* updateXML -> __updateXML_legacy
* writeXMLDescription -> writeXMLDescription_legacy
* createURLList -> __createURLList_legacy
* getURLHash -> getURLHash_legacy
* getURLList -> __getURLList_legacy
* getLocale -> getLocale_legacy
* getStripDelete -> __getStripDelete_legacy
* getStripLibs -> __getStripLibs_legacy
* getStripTools -> __getStripTools_legacy
* addStrip -> __addStrip_legacy- implement new methods to add and get data expressed as in the XML- update unit tests to use _legacy method names- implement new unit tests for new methods
* create new config.xml file for new unit tests- implement XMLStripData class
* Wed Nov 28 2012 msAATTsuse.de- fixes use of custom disk size value via the element or the option --bootvm-disksize. In combination with LVM volumes the result disk size is much bigger because kiwi just added the requested volume sizes to the specified disk size which is not the desired behavior
* Wed Nov 28 2012 rjschweiAATTsuse.de- fix array comparison in the test case
* at present names that contain \"special\" characters may not compare properly, such that libstdc++ will not match a libstdc++ entry in the other array. Use string interpolation to address the issue.
* Tue Nov 27 2012 rjschweiAATTsuse.de- use numbers for calculations, do not depend on implicit conversion
* Tue Nov 27 2012 msAATTsuse.de- DB: rebuild documentation
* Tue Nov 27 2012 msAATTsuse.de- DB: update documentation due to the new pxe unionfs mount method
* Tue Nov 27 2012 msAATTsuse.de- added mountSystemUnionFS() function which uses fuse-unionfs to overlay mount the root system according to the contents of UNIONFS_CONFIG. So far this setup is only supported with pxe images as requested in (bnc #776505)
* Mon Nov 26 2012 msAATTsuse.de- remove searchUSBStickDevice() function. When kiwi was called with a target disk device the assumption was made that the install media should also be created on a device directly. If the install media is a USB stick (installstick=\"true\") kiwi searches for stick devices during the process and: a) exits with an error if it can\'t find one b) asks which one to use if it finds more than one This behavior is a pita for automatic build processes and it also fails if the stick media does not set the \'removable\' state in its meta data correctly. Additionally the assumption that the install media is present as a device just because the image was created from an existing device also sucks This commit removes the search for stick devices and always creates the install media through a loop as a file which then needs to be dumped on the target device
* Mon Nov 26 2012 msAATTsuse.de- fixed spec file, syslinux exists on ix86 and x86_64 only
* Mon Nov 26 2012 msAATTsuse.de- cleanup global mount method to use the getPartDevice() function to search for partition devices
* Mon Nov 26 2012 msAATTsuse.de- cleanup setupInstallStick(), the reference to this->{loop} might be undefined depending on the environment better use the contents of $haveDiskDevice
* Mon Nov 26 2012 msAATTsuse.de- removed obsolete mount code from setupInstallStick()
* Mon Nov 26 2012 msAATTsuse.de- fixed setupInstallStick() if called in Studio mode. If this function is called with a disk device as reference it expects the target USB stick to be plugged in, in order to create the install image directly on that stick. For Studio this does not work because the target stick is never attached to the containment within this call happens. Thus this fix creates the install USB stick image in a loop device
* Mon Nov 26 2012 msAATTsuse.de- added sanity check for mount() method to fail if no source information is passed
* Fri Nov 23 2012 msAATTsuse.de- v5.04.27 released
* Fri Nov 23 2012 msAATTsuse.de- fixed broken postImage() filesystem check which prevented the creation of the system image .md5 file
* Fri Nov 23 2012 msAATTsuse.de- v5.04.26 released
* Fri Nov 23 2012 msAATTsuse.de- changed behavior of --fat-storage option. Instead of syslinux we now use grub2 to boot from the fat partition. It has turned out that grub2 is more stable and behaves better when using the image on a USB stick. The grub2 theme support also makes it easier to use custom branded boot graphics
* Fri Nov 23 2012 msAATTsuse.de- fixed cleanup of temporary copy of sysconfig/proxy. If there is a fillup template for the file and the file hasn\'t changed as part of the build process the fillup template is restored instead of removing the file (bnc #777151)
* Thu Nov 22 2012 msAATTsuse.de- fixed logical volume name building in resizeLVMVolumes() the function only evaluates volume names at the primary level e.g /opt. As soon as you have a volume e.g /opt/bob it failed to resize
* Thu Nov 22 2012 msAATTsuse.de- added support for a jump partition which is added before the actual boot partition. This is used for grub2 efi based disk images now. kiwi just put the created grub2 bootx64.efi module onto the fat16 based jump partition and let grub2 read all data from the second ext3 based boot partition. This allows standard linux filesystem based boot partitions and it has also turned out that this disk layout might be required for arm based images as well. But so far this system is connected to the efi setup only
* Thu Nov 22 2012 msAATTsuse.de- added parted to openSUSE 12.2 JeOS template
* Thu Nov 22 2012 msAATTsuse.de- fixed typo in setupFilesystem() which caused a fat16 filesystem even though a fat32 filesystem was requested.- changed the efi boot partition type to fat16- added ext2 modules to the bootx64.efi module
* Wed Nov 21 2012 msAATTsuse.de- adapt oemboot suse/rhel-repart code to make use of the flexible boot partition location in $kiwi_BootPart. The partition ID stored there is used as the beginning of the partition layout. Instead of a fixed boot partition at 1 the layout handles the value of $kiwi_BootPart as the start. If there is no boot partition the first partition must be the root partition as usual.
* Wed Nov 21 2012 rjschweiAATTsuse.de- update the driver handling for the imageConfig data structure
* take advantage of the private helper methods implemented for package handling
* eliminates code duplication
* simplifies implementation of driver handling methods- update the unit tests to adjust for minor differences in messages
* Wed Nov 21 2012 praveen_paladuguAATTsuse.de- fixed perl dependencies in spec file for rhel/centos- resolve suse version checking to zero if the suse_version macro is not defined. This allows the package build going easily also in non-suse based distros
* Wed Nov 21 2012 msAATTsuse.de- use new partids hash for the bootloader stage setup setupBootLoaderStages()
* Wed Nov 21 2012 msAATTsuse.de- use new partids hash for the setup and installation of the bootloaders, setupBootLoaderConfiguration() / installBootLoader()
* Wed Nov 21 2012 msAATTsuse.de- fixed use of filehandle in addAppdata() and collectPackages() of the instsource media KIWICollect module
* Tue Nov 20 2012 msAATTsuse.de- use new partids hash to create the device map and cleanup access to the new device map data
* Tue Nov 20 2012 msAATTsuse.de- make sure setupBootFlags also updates the .splash.gz variant of the initrd if the function was called with the non splash (.gz) variant of the initrd.
* Tue Nov 20 2012 msAATTsuse.de- fixed post partition size check and read-write dump if split + lvm is used. An undefined device was used for the check and the dump in this case
* Tue Nov 20 2012 delgadoAATTsuse.de- allow getExecArgsFormat to parse python optparse/argparse output. python uses the form \'-o, --option\' whereas we don\'t expect a comma between the short and long version- add unit test for this option format
* Tue Nov 20 2012 msAATTsuse.de- check for kiwi_BootPart from new partition IDs meta data in setupBootPartition(). This could be used to map the boot partition to another than the first partition
* Tue Nov 20 2012 msAATTsuse.de- switched oemboot boot code to make use of config.partids
* Tue Nov 20 2012 msAATTsuse.de- switched vmxboot boot code to make use of config.partids
* Tue Nov 20 2012 msAATTsuse.de- added additional meta data file with suffix .pids. The file contains the information about the ID/Name of the root,boot readonly/readwrite device according to this appliance if a virtual disk based image was requested. The information is included as config.partids into the initrd and is used on first boot. Rather than guessing the purpose of partitions the initrd will now know it exactly
* Tue Nov 20 2012 msAATTsuse.de- fixed call of method textContent() on an undefined value
* Tue Nov 20 2012 rjschweiAATTsuse.de- fix typo and logic error in test cases (bnc #790254)
* typo cause list comparison to fail
* logic error caused a name that should have been in he comparison list to be omitted
* Mon Nov 19 2012 dvaleevAATTsuse.de- changed spec file to be quiet on unpacking the source tarball. During kiwi build don\'t list files and directories of tarball. This floods build log pretty much.
* Mon Nov 19 2012 msAATTsuse.de- don\'t fail hard if copyBootCode() cannot create e.g symlinks on copy of the boot data. Just report that as a warning
* Mon Nov 19 2012 msAATTsuse.de- if a bootfilesystem is specified it\'s required to check its type prior to the creation of the partition table because it might be required to specify a partition label according to the selected filesystem
* Mon Nov 19 2012 rjschweiAATTsuse.de- fix return values of legacy methods of the XML class, return values as string. Older versions of the LibXML perl binding do not have an overloaded eq operator for a NodeList where the value of the first entry of a node can be used in a comparison. There is however a string conversion, thus placing the nodelist inside a string \"$nl\" does the trick. This fixes issues on SLES 11 with the unit tests Related to (bnc #790254)- update the trigger files to fix unit tets execution that was broken when ArchiveData, IgnoreData, and ProductData were renamed To contain the Package prefix in the name. Related to (bnc #790254)
* Mon Nov 19 2012 msAATTsuse.de- fixed spec file:
* update author list for kiwi-instsource
* make sure at least ext and fat filesystem creation tools are required
* Sun Nov 18 2012 msAATTsuse.de- fix use of uninitialized variables
* Fri Nov 16 2012 msAATTsuse.de- v5.04.25 released
* Fri Nov 16 2012 msAATTsuse.de- arm: removed match for image-$VERSION in suseStripKernel
* Thu Nov 15 2012 msAATTsuse.de- fixed kernel search in suseStripKernel for armv5 kernel. There we have Image-
* (with a capital \'I\')
* Thu Nov 15 2012 msAATTsuse.de- fixed spec file requirements: kiwi has a create mode runtime check for the vgs command. Thus the kiwi package should require lvm2 to become installed
* Thu Nov 15 2012 msAATTsuse.de- make sure possibly left over dhcpcd pid file from a -T (test) call is removed before requesting the IP address for the interface. It has turned out that the sle10 dhcpcd has this bug and kiwi works around this one by actively checking for a pid file after the dhcpcd -T (test) call (bnc #787924)
* Thu Nov 15 2012 msAATTsuse.de- use baseUpdateSysConfig() function to update variable contents of sysconfig files as required in the suseConfig() function. This eliminates the various sed statements here and uses one common function for all sysconfig updates
* Tue Nov 13 2012 bgeukenAATTsuse.de- Fixed regular expression for replacing HWCLOCK in clock config file This fixes a bug that causes a wrong \'--localtime\' / \'--utc\' entry in USE_HWCLOCK setting. This setting got introduced first with openSUSE 12.2
* Tue Nov 13 2012 msAATTsuse.de- fix use of uninitialized variables
* Tue Nov 13 2012 msAATTsuse.de- netboot: fixed dhcpcd \'-r\' option name clash. Older versions of dhcpcd use that option in a completely different meaning, thus we distinguish the call by the the capability of the \'-p\' option (interface persistency) which was introduced in newer versions of dhcpcd only (bnc #787924)
* Tue Nov 13 2012 msAATTsuse.de- fix use of uninitialized variables
* Tue Nov 13 2012 rjschweiAATTsuse.de- add spaces to separate option arguments
* Mon Nov 12 2012 rjschweiAATTsuse.de- fix use of uninitialized variables- do not clobber the FS tune settings for ext2,3,4 if fsnocheck and tune settings are provided
* Mon Nov 12 2012 msAATTsuse.de- fixed use of implicit split to AATT_ with a temporary variable
* Sun Nov 11 2012 msAATTsuse.de- v5.04.24 released
* Sun Nov 11 2012 msAATTsuse.de- fixed build of plain bootiso/bootstick from kiwi initrd without system image. The call kiwi --bootusb failed to work because it tried to access the XML description which can\'t work when no system image is specified
* Fri Nov 09 2012 msAATTsuse.de- v5.04.23 released
* Fri Nov 09 2012 msAATTsuse.de- fixed device name setup in recovery/restore mode. kiwi assumes an overlay setup when a second partition exists but this is not true if the second partition is the swap space. For the initial boot of an appliance the device setup always works but when oemboot has created new partitions e.g swap space and the kiwi initrd runs again in recovery/restore mode the device setup might be broken because of another partition layout compared to the initial state
* Fri Nov 09 2012 rjschweiAATTsuse.de- implement XML data classes for elements that are children of
* KIWIXMLPackageArchiveData handle
* KIWIXMLPackageIgnoreData
* KIWIXMLPackageCollectData handle and
* KIWIXMLPackageData handle
* KIWIXMLPackageProductData - update the FileData base class to allow extension by child to support additional allowed attributes- implement unit tests for all new classes- integrate new data classes into XML class and rename the following methods to _legacy
* getArchiveList
* addPatterns
* addImagePatterns
* getList
* getTypeSpecificPackageList
* getPackageNodeListgetPackageAttributes
* getImageConfig
* getBaseList
* getInstallList
* getDeleteList
* getBootIncludes
* addPackages
* addImagePackages
* addRemovePackages- update client code to use
*_legacy methods- removed hasDefaultPackages method- implement equivalent functionality with the new methods
* addArchives
* getArchives
* addBootstrapPackages
* addPackages
* addPackagesToDelete
* getBootDeletePackages
* getBootIncludeArchives
* getBootIncludePackages
* getBootstrapPackages
* getPackages
* getPackagesToDelete
* getProducts- the and are treated equally as a package collection- update unit tests for XML
* there are some bugs in the _legacy methods, these will not be fixed as the bugs will go away when we switch to the new code. The legacy code does not respect type specific archives being added.
* update the test data to re-use same configuration files for multiple test cases
* use _legacy names
* implement new tests for new methods- update RuntimeChecker to use new methods in the XML- implement tnew triggers and update existsing triggers as needed
* Fri Nov 09 2012 rjschweiAATTsuse.de- some clean up, typos, remove unused code
* Fri Nov 09 2012 msAATTsuse.de- added tar to 12.2 JeOS
* Thu Nov 08 2012 msAATTsuse.de- add support for grub2 based recovery system
* Thu Nov 08 2012 msAATTsuse.de- fixed indention of linux command in grub.cfg
* Thu Nov 08 2012 rjschweiAATTsuse.de- fix the automatic alias generation to remove \'$\' from the name, this allows users to use SMT repos without having to specify an alias in the config.xml file
* Thu Nov 08 2012 msAATTsuse.de- use contents of $bootPartitionFSType to check symlink capabilities
* Thu Nov 08 2012 msAATTsuse.de- fixed cleanup code in KIWILinuxRC after mkinitrd was called in case of arm images not all obsolete data was removed- pass boot filesystem type as first argument to the pre bootloader install script and handle it in the arm JeOS template in uboot-image-setup- export bootPartitionFSType in KIWILinuxRC and handle it in the hook script kiwi-hooks/setupUBoot.sh
* Thu Nov 08 2012 msAATTsuse.de- DB: rebuild schema documentation
* Thu Nov 08 2012 msAATTsuse.de- fixed nic interface runtime check, the value \'0\' is valid for the index of a VMware interface definition, thus it\'s wrong to do a true/false check here.
* Thu Nov 08 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Wed Nov 07 2012 msAATTsuse.de- make sure var/log/ConsoleKit exists when booting the first time
* Wed Nov 07 2012 msAATTsuse.de- fixed cleanKernelFSMount() to use the correct root path
* Wed Nov 07 2012 msAATTsuse.de- added support for reading /etc/kiwi/repoalias file in KIWIURL.pm. The repoalias definition can be used to mirror a repo path to another location (bnc #788536)
* Wed Nov 07 2012 msAATTsuse.de- SuSEconfig is gone, call it only if it exists
* Tue Nov 06 2012 msAATTsuse.de- fixed schema for bootfilesystem attribute, attribute was not set into the attribute list in the RelaxNG schema
* Tue Nov 06 2012 msAATTsuse.de- added support for optional type attribute \'bootfilesystem\' which can be one of ext2,ext3,fat16 or fat32 (bnc #788374)- added unit test for new attribute
* Tue Nov 06 2012 msAATTsuse.de- update pre-commit hook
* Tue Nov 06 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Tue Nov 06 2012 msAATTsuse.de- removed obsolete and unmaintained dotty graph file
* Tue Nov 06 2012 rjschweiAATTsuse.de- remove the statistics colector and the generated data we never got around to finish the integration of the data collector and it is not used. At this point it appears that the code will just not be used in the long run, thus it is getting removed
* Tue Nov 06 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Tue Nov 06 2012 msAATTsuse.de- fixed openSUSE product building
* Mon Nov 05 2012 msAATTsuse.de- fixed handling of special characters in grub2 menuentry setup single quotes are required for custom names (bnc #786262)
* Mon Nov 05 2012 msAATTsuse.de- fixed spec file require for kiwi-tools. kiwi should require the same or newer kiwi-tools version compared to the base kiwi package
* Mon Nov 05 2012 msAATTsuse.de- put tests/unit/
*.t to perl critic level 4- put tests/qa/stats/collector.pl to perl critic level 4- update pre-commit hook
* Sat Nov 03 2012 rjschweiAATTsuse.de- clean most test unit driver files to perlcritic level 2 The remainaing driver files must be cleaned after we have migrated the code to use the new internal data structure
* Fri Nov 02 2012 msAATTsuse.de- v5.04.22 released
* Fri Nov 02 2012 msAATTsuse.de- removed vmxboot respectively image type vmx from arm code branch. All arm images are oem\'s vmx is unused here
* Fri Nov 02 2012 msAATTsuse.de- fixed device detection in the oemboot install code. The try to remove the boot device from the list of possible install devices. The sed statement used here caused a broken list of the substring also matches other devices. The fix here changes this to exactly match the device string of the boot device and nothing else
* Fri Nov 02 2012 msAATTsuse.de- fixed etc/default/grub GRUB_DISTRIBUTOR name setup
* Fri Nov 02 2012 msAATTsuse.de- include mdmon to handle raid array status changes if a dmraid array is in use
* Fri Nov 02 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Fri Nov 02 2012 msAATTsuse.de- fixed setup of /etc/default/grub to contain the bootloader setup in terms of boot title, timeout, etc... (bnc #786262)
* Fri Nov 02 2012 rjschweiAATTsuse.de- report an error when a definition is specified in the configuration and we cannot find the necessary command to obtain LVM information- implement consistency check for user settings
* if a user is specified in two sections all given settings must be the same
* the same user may not be specified twice in the same section- implement group setting consistency check
* a group id may only be used once
* a group name may only be used with one ID
* Thu Nov 01 2012 rjschweiAATTsuse.de- implement KIWIXMLUserData class to store user data- implement unit test for new class- implement unit tests for new methods- tie new class into XML Class
* rename the following methods to
*_legacy __addVolume() __populateImageTypeAndNode() __updateDescriptionFromChangeSet() __populateProfiledTypeInfo() getUsers() getTypes()
* add new getUsers method returning an array of UserData objects
* add new getType method return TypeData object for given type name- fixup client code to call new _legacy methods- update unit tests using _legacy
* Wed Oct 31 2012 guillaume.gardetAATTsuse.de- Added armv5 support
* Wed Oct 31 2012 msAATTsuse.de- v5.04.21 released
* Wed Oct 31 2012 msAATTsuse.de- fixed unit test, don\'t use remote URLs for a test they will fail inside the buildservice because there is no network access allowed
* Wed Oct 31 2012 msAATTsuse.de- fixed spec file, added lvm2 to buildrequires. This is required to let the unit tests work
* Wed Oct 31 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Wed Oct 31 2012 msAATTsuse.de- v5.04.20 released
* Tue Oct 30 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Tue Oct 30 2012 msAATTsuse.de- don\'t send data to a closed file descriptor
* Tue Oct 30 2012 msAATTsuse.de- fixed use of uninitialized values in the code now reported due to the use of warnings at runtime
* Tue Oct 30 2012 msAATTsuse.de- fixed name for install media:
* install ISO has suffix: .install.iso
* install USB has suffix: .install.raw
* install PXE has suffix: .install.tgz
* Tue Oct 30 2012 msAATTsuse.de- update pre-commit hook
* Tue Oct 30 2012 msAATTsuse.de- put KIWIXML.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWISharedMem.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWISatSolver.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIRoot.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIRepoMetaHandler.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIProductData.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIMigrate.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIManager.pm to perl critic level 4
* Tue Oct 30 2012 rjschweiAATTsuse.de- add consistency check to verify a volume name is unique within each definition- add unit test
* Tue Oct 30 2012 msAATTsuse.de- put KIWILog.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIImage.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIImageFormat.pm to perl critic level 4
* Tue Oct 30 2012 msAATTsuse.de- put KIWIConfigure.pm to perl critic level 4
* Mon Oct 29 2012 msAATTsuse.de- put KIWICollect.pm to perl critic level 4
* Mon Oct 29 2012 msAATTsuse.de- put KIWIArchList.pm to perl critic level 4
* Mon Oct 29 2012 rjschweiAATTsuse.de- add consistency check for the case can only delete packages, thus specifying archives, patterns, or a product is not valid
* Mon Oct 29 2012 msAATTsuse.de- fixed removal of temporary boot_bind entry in fstab
* Mon Oct 29 2012 msAATTsuse.de- make sure proc/cmdline is there when setting up logging
* Mon Oct 29 2012 msAATTsuse.de- create LVM volume filesystems with suitable number of inodes for filesystems which require this. Occasionally it happens that we run out of space when using a custom LVM volume setup. The reason for this is that the filesystem cannot allocate more inodes because kiwi calculates the inode count for the root volume but not for the sub lvm volumes e.g /var, /srv, etc according to the volume setup. This commit fixes this in a way that kiwi creates a suitable number of inodes for each filesystem inside the LVM
* Sat Oct 27 2012 rjschweiAATTsuse.de- update kiwi manual pages to clarify meaning of set-repo argument- fix the behavior of the new implementation of setRepository
* replaceable is considered the default, thus replace a repo if it is the first in line and has not status set or the status is marked replaceable
* properly replace the first repo specified in config.xml that is not marked \"fixed\". Previously the default profile would have been the first to get a repo replaced, no matter the definition order in config.xml- update the unit tests- encode the default status of replaceable in the RepositoryData object
* Fri Oct 26 2012 msAATTsuse.de- make sure repos marked as imageinclude will preserve its priority
* Fri Oct 26 2012 msAATTsuse.de- changed back to clicfs for 12.2 live iso JeOS template. I found several problems with btrfs and it\'s seed implementation
* the compressed read-only part needs to be bigger than the data requires it. if this is not given adding the seed dev will fail
* when adding a ramdisk seed for the combination read-only loop from ISO plus read-write /dev/ram (brd) block device the kernel throws a trace from btrfs not being able to relocate sys chunks and that \'balancing\' it would solve that... which is not true
* Fri Oct 26 2012 msAATTsuse.de- make sure edit boot scripts get the executable bit set
* Fri Oct 26 2012 rjschweiAATTsuse.de- change behavior of boolean in the XML
*Data classes
* undefined attributes in the initialization of an object remain undefined
* defined values are either \'true\' or \'false\'
* this change had to be made such that merging and updating of preferences in the XML can be supported correctly
* Fri Oct 26 2012 rjschweiAATTsuse.de- add new runtime check to verify that repo aliases used are unique this has to be a runtime check as it is valid to define repos with the same alias as long as those repos are never used at the same time during a build- implement setPreferences method in the XML class preferences will be assigned to the profile preferences that have an existing definition, if no definition exists the setting applies to the default preferences- add unit test for new runtime check- add unit test for new setPreferences method- remove all calls to _legacy methods from the RuntimeChecker thus the RuntimeChecker is the first using the new internal data structure
* Thu Oct 25 2012 msAATTsuse.de- fixed getSector to calculate with numeric values
* Thu Oct 25 2012 msAATTsuse.de- fixed IPC signal setup
* Thu Oct 25 2012 msAATTsuse.de- fixed use of uninitialized values in KIWIBoot.pm. with the last cleanup we use warnings for KIWIBoot now thus we get informed about perl warnings for this module. Along with the ongoing process of cleaning up the code by using perl-critic other modules will follow
* Thu Oct 25 2012 msAATTsuse.de- make KIWIArch.pm perl critic level 3 clean
* Thu Oct 25 2012 msAATTsuse.de- make KIWIBoot.pm perlcritic level 4 clean
* Thu Oct 25 2012 msAATTsuse.de- make kiwi.pl perl critic level 4 clean
* Wed Oct 24 2012 msAATTsuse.de- update pre-commit hook
* Wed Oct 24 2012 msAATTsuse.de- make kiwi.pl perl critic level 5 clean
* Wed Oct 24 2012 msAATTsuse.de- make KIWIBoot.pm perlcritic level 5 clean
* Tue Oct 23 2012 msAATTsuse.de- DB: rebuild schema documentation
* Tue Oct 23 2012 msAATTsuse.de- DB: rebuild documentation
* Tue Oct 23 2012 msAATTsuse.de- DB: update documentation concerning the new installpxe attribute
* Tue Oct 23 2012 msAATTsuse.de- added support for the attribute. if set kiwi creates a tarball which contains all data required to let an oem disk image to become installed via pxe. The archive contains: kernel, initrd, system gzimage, md5sum and kernel boot options for the append line in the pxe setup This fixes bug (bnc #785222)
* Tue Oct 23 2012 msAATTsuse.de- added kiwi.pl to pre-commit check
* Tue Oct 23 2012 rjschweiAATTsuse.de- do not support creation of a TypeData object without keyword initialization hash. The image attribute is mandatory on the element, thus it should not be possible to construct an object representing the element without specifying a value for image- add the new installpxe member to the bool keywords- update the unit tests to handle the new condition- add tests for new installpxe member
* Tue Oct 23 2012 rjschweiAATTsuse.de- change the handling of booleans in the XML
*Data classes
* implement __initializeBoolMembers in the base class to setup boolean members
* modify the __setBooleanValue method such that a boolean value is defined as a member only if it is true, this allows us to change checks from \"if ($bool && $bool eq \'true\')\" to simply \"if ($bool)\" this is consistent with general language conventions
* Mon Oct 22 2012 toganmAATTsuse.de- Emacs mode fix: Fix typos in the suse-start-kiwi-xmllocator. Rather than blindly adding suffixes to nxml-mode just add kiwi suffix to include to the auto-mode-list
* Mon Oct 22 2012 msAATTsuse.de- fixed unit test kiwiXML.pm:test_addRepositoriesExistPrefLic. The test checks for duplicate preference license indicator but adds an invalid bool value for the attribute. Thus kiwi complains about the invalid value and not about the duplicate indicator
* Mon Oct 22 2012 msAATTsuse.de- added \'imageinclude\' to supportedKeywords in KIWIXMLRepositoryData to become checked by base class code in KIWIXMLDataBase. Additionally removed obsolete and commented out code from KIWIXMLDataBase constructor
* Fri Oct 19 2012 msAATTsuse.de- v5.04.19 released
* Fri Oct 19 2012 msAATTsuse.de- added central deactivateVolumeGroup and activateVolumeGroup functions and make sure all udev events are processed before activating/deactivating a volume group
* Fri Oct 19 2012 msAATTsuse.de- fixed resizeFilesystem() function:
* don\'t create INITRD_MODULES list here, this caused multiple entries
* use separate mount point not /mnt for temporary mount on resize
* make sure all udev events are processed before resize
* Fri Oct 19 2012 msAATTsuse.de- removed __checkKernelVersionToolExists runtime check. kiwi provides the tool itself thus it\'s always there
* Fri Oct 19 2012 msAATTsuse.de- v5.04.18 released
* Fri Oct 19 2012 msAATTsuse.de- make path check in KIWIURL more robust
* Fri Oct 19 2012 rjschweiAATTsuse.de- force KIWIXMLFileData to be instantiated with a keyword argument hash- remove superfluous if test in KIWIXMLDescriptionData and KIWIXMLProfileData classes- update unit tests
* Fri Oct 19 2012 rjschweiAATTsuse.de- fix up KIWIXMLRepositoryData class
* do not support un-initialized construction
* use base class infrastructure for the preferlicense member- update unit tests accordingly
* Fri Oct 19 2012 rjschweiAATTsuse.de- implement __hasInitArg in the XMLDataBase class
* this allows children that should not be constructed without an initialization argument to complain in a consistent way it the arg is missing- update ProfileData to use new method in base class- clean up DescriptionData implementation
* do not support construction without arg : eliminates need for object consistency check
* make setters consistent in behavior with other
*Data class setters- revamp the DescriptionData unit tests
* test structure consistent with other tests for XML
*Data tests
* smaller tests, better coverage
* Thu Oct 18 2012 msAATTsuse.de- fixed grub2 setup. If the root filesystem is LVM based grub2 can\'t read e.g the fonts from this device. Thus this patch ensure all required theme data incl. the unicode font is part of the boot device
* Thu Oct 18 2012 msAATTsuse.de- use the setupFileSystem function to create the boot filesystem this is done for code cleanup and also to prepare the code for setting up a custom boot partition filesystem. At the moment the boot filesystem is bound to which bootloader is in use but e.g for arm boxes the same bootloader might require different boot filesystems, thus this could become an option in kiwi
* Thu Oct 18 2012 rjschweiAATTsuse.de- add tests to run when the XML class changes. Previous update had an issue that was found by a unit test that was not automatically run from the triggers
* Wed Oct 17 2012 msAATTsuse.de- fixed copyBootCode to work if no boot partition is used
* Wed Oct 17 2012 rjschweiAATTsuse.de- implement a ProfileData object
* while profile data was already included in the new data structure, information about this data was not returned as an object. This change addresses this outstanding issue
* implement unit tests for the new object
* update the XML object to integrate the ProfileData class
* update the XML unit test- change all XML
*Data classes to be children on XMLDataBase and update unit tests to handle new initialization and new error conditions and error messages
* Tue Oct 16 2012 rjschweiAATTsuse.de- change __setDefaultType() to meet the following conditions:
* if a type is marked primary within the selected profiles it is the default type
* if no type is marked primary then the first type of the default section (the one not assigned to a specific profile) becomes the default type; should the default have no type than the first type of the first profile bound preferences section is the default type- add test cases to verify this behavior
* Tue Oct 16 2012 msAATTsuse.de- added perl-Readonly requirement to spec file
* Tue Oct 16 2012 msAATTsuse.de- fixed kernel version tool to work with uImage files
* Tue Oct 16 2012 msAATTsuse.de- use kiwi\'s kversion tool instead of get_kernel_version to let other distros also be part of the game
* Mon Oct 15 2012 msAATTsuse.de- cleanup volume size calculation to be more readable
* Mon Oct 15 2012 msAATTsuse.de- fixed broken symlink when creating tbz images
* Mon Oct 15 2012 msAATTsuse.de- DB: update check target to verify docbook build env
* Mon Oct 15 2012 msAATTsuse.de- DB: rebuild documentation
* Mon Oct 15 2012 msAATTsuse.de- DB: update documentation, add some notes to oem pxe installs
* Fri Oct 12 2012 msAATTsuse.de- v5.04.17 released
* Fri Oct 12 2012 msAATTsuse.de- arm: fixed JeOS uboot-setup.tgz:setupUBoot.sh. when calling code via runHook the first parameter is the name of the hook thus I had to shift all params by one
* Fri Oct 12 2012 msAATTsuse.de- v5.04.16 released
* Fri Oct 12 2012 msAATTsuse.de- fixed reading search path for custom boot config scripts. The information of the origin path of the image description is read from the image/main::Prepare file stored in the unpacked root tree. Within KIWIBoot the reading of that file should be done inside the constructor when the XML data is read from the unpacked tree. That way the path is consistent for the life time of the object and needs to be read only once.
* Fri Oct 12 2012 msAATTsuse.de- fixed typo in message string, obsolete \'\
\'
* Fri Oct 12 2012 msAATTsuse.de- fixed kiwi --installcd mode and the global mount() method in general to know about LVM disks. In this case the mount has to activate the volume group in order to access the devices inside. The code to do this was in the checkLVMbind method in KIWIBoot but it is required before in the mount() method in KIWIGlobals
* Thu Oct 11 2012 msAATTsuse.de- fixed creation of .profile KIWI_LVM_LV
* variables if no size is set for the volume
* Thu Oct 11 2012 msAATTsuse.de- cleaned up the code which walks through the volumes of an LVM setup and calculates the volume sizes and disk size increasement
* Wed Oct 10 2012 msAATTsuse.de- added boot time correction for kiwi initrd\'s (bnc #784316)- removed obsolete disable of hotplug helper when starting udev- start error logging as early as possible
* Wed Oct 10 2012 msAATTsuse.de- removed obsolete comments about deletion of _legacy functions Robert already sorted them and added a comment on top of all these functions
* Tue Oct 09 2012 msAATTsuse.de- fixed repo setup for arm JeOS template
* Mon Oct 08 2012 msAATTsuse.de- use simple TERM signal to stop initrd\'s udevd
* Sun Oct 07 2012 msAATTsuse.de- DB: rebuild documentation
* Fri Oct 05 2012 cschumAATTsuse.de- DB: be more specific about how bootinclude affects the system image.
* Fri Oct 05 2012 msAATTsuse.de- v5.04.15 released
* Fri Oct 05 2012 msAATTsuse.de- fixed setup of dmraid devices. A new function called identifyDMRaid() has been added which searches for mapped dmraid disks and also removes the devices which belongs to the raid from the list of install disks
* Thu Oct 04 2012 msAATTsuse.de- fixed grub2 setup to correctly distinguish the efi and non efi config files for dual boot of install iso images
* Tue Oct 02 2012 dvaleevAATTsuse.de- ppc: fix install iso blessing. In order to have installation CD/DVD bootable on PowerMac the suseboot directory must be blessed correctly. The situation was that -hfs-bless looks for the first directory and tries to bless required subdir. But in case required subdir is in the second directry, nothing got blessed. So let\'s switch the order.
* Tue Oct 02 2012 dvaleevAATTsuse.de- ppc: don\'t hardcode volume id. The volume ID is hardcoded to the value of \'FIXME\'. Use createVolumeID function to create dynamic volume ID. Something like openSUSE 12.2 1 where 1 is the media number
* Tue Oct 02 2012 msAATTsuse.de- update language translations po/pot files
* Tue Oct 02 2012 msAATTsuse.de- added a backtitle information when displaying the language dialog saying that the boot will continue in a few seconds
* Tue Oct 02 2012 msAATTsuse.de- fixed grub2 \'Boot from Hard Disk\' chainloader setup
* Tue Oct 02 2012 msAATTsuse.de- fixed grub2 root and module setup for bios based ISO boot
* Tue Oct 02 2012 msAATTsuse.de- added a 10sec timeout for the language selection (bnc #778570)
* Tue Oct 02 2012 msAATTsuse.de- make sure unicode font inclusion for install iso images happens when grub2 is used and not only when an efi based image is created
* Tue Oct 02 2012 msAATTsuse.de- fixed grub2 font, terminal and root configuration
* Tue Oct 02 2012 msAATTsuse.de- don\'t reset the boot_bind system when in GPT/EFI mode
* Mon Oct 01 2012 msAATTsuse.de- fixed path for grub.cfg when in efi mode
* Mon Oct 01 2012 msAATTsuse.de- fixed repartition and bootloader setup in efi mode
* make sure the GPT metadata is updated to the real geometry
* fixed grub2 mkconfig and install calls to match efi
* make sure no parted call is blocked by user interaction
* Mon Oct 01 2012 msAATTsuse.de- fixed grub2 setup for efi based disk images. The grub.cfg file was broken, referencing (cd0) instead of the disk root device
* Fri Sep 28 2012 msAATTsuse.de- v5.04.14 released
* Thu Sep 27 2012 msAATTsuse.de- fixed ISO header Preparer string to point to openSUSE
* Wed Sep 26 2012 msAATTsuse.de- make losetup of btrfs cache devices race free
* Tue Sep 25 2012 msAATTsuse.de- v5.04.13 released
* Tue Sep 25 2012 msAATTsuse.de- cleanup spec file, correctly set Requires for kiwi-desc-
*boot
* Tue Sep 25 2012 msAATTsuse.de- make check for duplicate volume group name more robust
* Tue Sep 25 2012 msAATTsuse.de- v5.04.12 released
* Tue Sep 25 2012 msAATTsuse.de- fixed check for duplicate volume group name
* Mon Sep 24 2012 msAATTsuse.de- removed unused requirement to perl-File-Stat-Bits
* Fri Sep 21 2012 msAATTsuse.de- v5.04.11 released
* Fri Sep 21 2012 msAATTsuse.de- make sure images.sh from the boot images checks on umounting kernel filesystems aka /proc, /sys, etc before exiting
* Wed Sep 19 2012 msAATTsuse.de- better way to create uuid loop device in createLoopNode we loop setup first and rename the provided device
* Wed Sep 19 2012 msAATTsuse.de- make sure to release all mounts if KIWIOverlay fails
* Wed Sep 19 2012 rneuhauserAATTsuse.de- make sure /etc/sysconfig/kernel contains the virtio modules so that SLE10 mkinitrd picks it up correctly (bnc #747346)
* Tue Sep 18 2012 msAATTsuse.de- DB: rebuild documentation
* Tue Sep 18 2012 msAATTsuse.de- DB: update cache documentation
* Tue Sep 18 2012 msAATTsuse.de- when using the caching system the bootstrap part of the build is skipped. Thus profiled bootstrap sections could lead to missing data when using a cache. I have moved all profiled bootstrap sections to type=\"image\"
* Tue Sep 18 2012 msAATTsuse.de- moved from ext2/dm-snapshot cache system to btrfs seed (bnc #764042)
* Mon Sep 17 2012 msAATTsuse.de- fixed bootdev setup if no bindloop value is set
* Sat Sep 15 2012 msAATTsuse.de- fixed createFormat() to return success when the format conversion is skipped in targetstudio mode
* Sat Sep 15 2012 msAATTsuse.de- fixed KIWIImageFormat to work with a targetdevice as well
* Sat Sep 15 2012 msAATTsuse.de- fixed __clean_loop in KIWIImageFormat. due to mkinitrd mounting sys __clean_loop has to take care to release sys before umount of the loop
* Sat Sep 15 2012 msAATTsuse.de- fixed ec2 setup when only grub2 is installed. The xen loading system requires some grub related files to pre present
* Fri Sep 14 2012 msAATTsuse.de- allow ec2 format creation when in --targetstudio mode (bnc #779360)
* Fri Sep 14 2012 msAATTsuse.de- v5.04.10 released
* Fri Sep 14 2012 msAATTsuse.de- cleanup installBootLoader() function. There is one way to setup the boot device and not the mess I created before.- added helper function __getPartDevice() which finds the correct block device for a partition if you give it the disk device and the partition number
* Fri Sep 14 2012 msAATTsuse.de- fixed spec file. Added PreReq for kiwi-pxeboot and kiwi-templates to make sure required coreutils are there when the package is installed (bnc #780070)
* Fri Sep 14 2012 msAATTsuse.de- break long info message into two lines
* Fri Sep 14 2012 msAATTsuse.de- arm: make uboot setup scripts verbose
* Fri Sep 14 2012 msAATTsuse.de- check exit code from edit boot config script calls
* Fri Sep 14 2012 msAATTsuse.de- fixed uboot bootloader script to meet the bash needs
* Fri Sep 14 2012 msAATTsuse.de- add x-bit to uboot bootconfig scripts
* Fri Sep 14 2012 msAATTsuse.de- call editbootconfig script at the end of setupBootLoaderConfiguration and not at the beginning of installBootLoader. That\'s because there is one step in between which could break otherwise. Also make sure the script is searched in the original image description path
* Fri Sep 14 2012 msAATTsuse.de- arm: kernel-firmware does not exist there
* Fri Sep 14 2012 msAATTsuse.de- fixed arch setup for satsolver on armv7l
* Thu Sep 13 2012 msAATTsuse.de- use 512MB instead of 128MB for xen domU examples
* Thu Sep 13 2012 msAATTsuse.de- fixed __uniqueInPackages() function. It\'s not a good idea to grep via a regexp for duplicate entries. That\'s because if characters which have a special meaning in a regexp are part of the name it leads to invalid matching results. I thought I could fix this by using the quotemeta call but it has turned out that it does not quote with respect to the special meaning of characters for regular expressions. What we really want here is a dumb string match for duplicate entries.
* Thu Sep 13 2012 msAATTsuse.de- finally fixed xen boot with grub2. Problem was the missing gzio module which is required to read the signatured from the compressed (xen.gz) hypervisor
* Wed Sep 12 2012 msAATTsuse.de- arm: moved uboot related code into custom scripts outside of the kiwi code. The arm JeOS image template served as example for the uboot setup on panda/efika and beagle boards
* Wed Sep 12 2012 msAATTsuse.de- arm: remove kernel profiles from arm boot image descriptions. handle the kernel as bootincluded package from the system image description. See the example JeOS image for reference
* Wed Sep 12 2012 msAATTsuse.de- added new option \'--edit-bootinstall \' and the XML attribute which allows to run a script after the bootloader was installed. This allows custom changes to the bootloader installation. follow up change for (bnc #667950)
* Tue Sep 11 2012 msAATTsuse.de- The fetchFile() return value is broken: it returns status of the last command in the pipe. With atftp it works ok, but with curl it returns the status of the final dd command, which is always zero (bnc #779701)
* Mon Sep 10 2012 msAATTsuse.de- fixed check for duplicate packages. The check fails if quotable characters are part of the package name e.g bonnie++ with bonnie is ok
* Mon Sep 10 2012 msAATTsuse.de- fixed cleanup of rpm key tmp dir created for import
* Sun Sep 09 2012 msAATTsuse.de- fixed KIWIXML::addPackages() function in a way that it does not add packages if they are already added to the list
* Fri Sep 07 2012 msAATTsuse.de- v5.04.9 released
* Fri Sep 07 2012 msAATTsuse.de- fixed mount point name clash when using the isofrom feature.
* Fri Sep 07 2012 msAATTsuse.de- fixed cleanup code in createImageLiveCD
* Fri Sep 07 2012 msAATTsuse.de- archive image data with subfolder
* Thu Sep 06 2012 msAATTsuse.de- changed processing of build results:
* build within a subdirectory created below the specified destination directory. The name of this subdir is build out of the image type and the used profile(s)
* at the end of the build move the result files to the specified destination directory to keep the system backward compatible
* add option --archive-image which allows to pack the build results into a tar archive. The name of the archive is build out of the image name, type and used profile(s) This functionality was requested by (bnc #778787)
* fixed use of obsolete buildImageName() function and change to generateBuildImageName from the global space
* Thu Sep 06 2012 rjschweiAATTsuse.de- implement new classes for processing imageConfig data structure
* KIWIXMLEC2ConfigData =>
* KIWIXMLVMachineData =>
* KIWIXMLOEMConfigData =>
* KIWIXMLPXEDeployData =>
* KIWIXMLSplitData =>
* KIWIXMLSystemdiskData =>
* KIWIXMLTypeData =>
* KIWIXMLPreferenceData => - rename direct XML accessor functions with _legacy- integrate all new imageConfig processing classes for use in the main XML class
* Wed Sep 05 2012 msAATTsuse.de- fixed setupPackageKeys() to work without pubring.gpg
* Wed Sep 05 2012 msAATTsuse.de- fixed disk-or-partition check in KIWIGlobals::mount() method
* Tue Sep 04 2012 msAATTsuse.de- DB: rebuild documentation
* Tue Sep 04 2012 msAATTsuse.de- DB: update documentation, fixing information about flags attribute
* Tue Sep 04 2012 msAATTsuse.de- make sure we set the plymouth default theme inside the system image to activate it properly. Unfortunately this is not done by mkinitrd even thought the configuration files are correctly set up
* Tue Sep 04 2012 msAATTsuse.de- added warning/info message when using the --target-arch option
* Tue Sep 04 2012 msAATTsuse.de- netboot: enable multicast for system image and transfer to a block device, respectively disable it for any other transfer (bnc #773649)
* Mon Sep 03 2012 msAATTsuse.de- added check for duplicate LVM volume groups
* Mon Sep 03 2012 msAATTsuse.de- fixed setupBootThemes to create the correct configuration paths
* Mon Sep 03 2012 msAATTsuse.de- added two device checks for the list of disks reported by hwinfo which are used as possible install targets. First check is to read one byte from the device to find out if it\'s really possible to access it. Second check is to find the device specific serial number. Devices which are only mapped like lvm disks would appear multiple times but there is only one origin device which provides a serial string
* Mon Sep 03 2012 msAATTsuse.de- added Emacs kiwi XML editing support. For details see: http://lizards.opensuse.org/2012/08/31/editing-kiwi-configurations-with-emacs/ Thanks to Togan for his effort
* Mon Sep 03 2012 msAATTsuse.de- don\'t start plymouth if no framebuffer device is present
* Mon Sep 03 2012 msAATTsuse.de- fixed missing done flag for theme information
* Fri Aug 31 2012 msAATTsuse.de- v5.04.8 released
* Fri Aug 31 2012 msAATTsuse.de- fixed unit test due to changed revision check output
* Fri Aug 31 2012 msAATTsuse.de- v5.04.7 released
* Fri Aug 31 2012 msAATTsuse.de- fixed kiwirevision check, newline at eol invalidates the match
* Fri Aug 31 2012 msAATTsuse.de- v5.04.6 released
* Fri Aug 31 2012 msAATTsuse.de- fixed syslinux based boot partition setup. We don\'t have symlinks on fat thus we have to copy the result of mkinitrd to the boot/ directory on the boot partition
* Fri Aug 31 2012 msAATTsuse.de- adapt suse-live-usbstick example for 12.2, switching to btrfs because of bad impressions with persistent writing into clicfs
* Fri Aug 31 2012 msAATTsuse.de- allow overwrite of what kiwi thinks is the minimum required size
* Fri Aug 31 2012 msAATTsuse.de- fixed evaluation of ramonly attribute for clicfs based images
* Fri Aug 31 2012 msAATTsuse.de- fixed checkFileSystem() to correctly detect clicfs filesystems also use blkid to detect the filesystem in the first place.- fixed KIWIGlobal::mount() function to correctly identify a clicfs image as filesystem image and not as a disk
* Fri Aug 31 2012 msAATTsuse.de- fixed validation of kiwirevision attribute. The kiwi revision as it is defined in /usr/share/kiwi/.revision is not a number. Thus the XML schema should not require a number
* Fri Aug 31 2012 msAATTsuse.de- fixed system theme configuration for plymouth/grub2
* make sure kiwi writes the plymouth theme setup to /etc/plymouth/plymouth.conf. looks like the initrd creation tool of the distro uses the information from this file
* make sure kiwi writes the grub2 theme setup to /etc/default/grub. when using grub2-mkconfig this seems to be required
* Thu Aug 30 2012 msAATTsuse.de- removed console-setup.service helper for 12.2 JeOS. The final version of 12.2 allows console access after some time
* Thu Aug 30 2012 msAATTsuse.de- use background_image for grub2 boot message box
* Thu Aug 30 2012 msAATTsuse.de- allow to overwrite the architecture when computing package dependencies in the KIWISatSolver module. This allows to provide package information for other than the real architecture. In order to set the value the environment variable: KIWI_REPO_INFO_ARCH must be set
* Wed Aug 29 2012 msAATTsuse.de- fixed grub2 install if in targetdevice/targetstudio mode when using a real disk device the bindloop variable was not set because no partition binding is required
* Wed Aug 29 2012 mbarringerAATTsuse.de- Moving repository to my github: http://github.com/mbarringer/imagewriter
* Tue Aug 28 2012 msAATTsuse.de- added multiboot support for grub2 setup. This allows Xen dom0 appliances booting via grub2
* Tue Aug 28 2012 rjschweiAATTsuse.de- remove duplicate implementation of profile setting
* the setSelectionProfiles() and setActiveProfileNames() methods implemented the same functionality. The new method setSelectionProfileNames() is now the singular implementation of this functionality.
* relocate the new method into the block that separates code using the imageConfig data structure (this should avoid duplicate implementation in the future).- fix up the XML unit test to handle the new split for bootsplash and bootloader theme settings
* Tue Aug 28 2012 msAATTsuse.de- allow to overwrite the architecture when computing package dependencies in the KIWIXMLInfo module. This allows to provide package information for other than the real architecture. In order to set the value the environment variable: KIWI_REPO_INFO_ARCH must be set
* Tue Aug 28 2012 msAATTsuse.de- DB: rebuild schema documentation
* Tue Aug 28 2012 msAATTsuse.de- DB: rebuild documentation
* Tue Aug 28 2012 msAATTsuse.de- DB: update documentation due to the boot theme changes
* Tue Aug 28 2012 msAATTsuse.de- update XML descriptions to schema version 5.5
* Tue Aug 28 2012 msAATTsuse.de- added XSL stylesheet to auto convert former sections into and sections.
* Tue Aug 28 2012 msAATTsuse.de- split setup into and elements. This allows to have different theme values for splash and bootloader as it could appear with the plymouth and grub2. Additionally people are more flexible when providing custom branding data for either splash or the bootloader (bnc #777599)
* Tue Aug 28 2012 msAATTsuse.de- unset
*ROOT variables from config.mac if set via cmdline (bnc #777578)
* Mon Aug 27 2012 msAATTsuse.de- create a unique application ID for install ISO images
* Mon Aug 27 2012 msAATTsuse.de- fixed creation of install media if a target/studio device is used which is a disk but requires a mapping section to access partitions on this disk. One example is a NBD mapped disk which requires kpartx to run before one can access partitions on the disk
* Sun Aug 26 2012 msAATTsuse.de- fixed restore of kernel splash in setupBootFlags()
* Sun Aug 26 2012 msAATTsuse.de- fixed obsolete printout of done flag
* Sun Aug 26 2012 msAATTsuse.de- add better user message about used splash system- prevent stderr output from \'cpio -it\' result
* Sat Aug 25 2012 rjschweiAATTsuse.de- implement setRepository method using the imageConfig data structure
* this will eventually replace setRepository_legacy()
* it is not certain thatthis is needed in the long run
* this completes the Repository handling in the imageConfig data structure- unit tests for the new implementation
* Fri Aug 24 2012 msAATTsuse.de- v5.04.5 released
* Fri Aug 24 2012 msAATTsuse.de- fixed unit tests to work in 32bit environment
* Fri Aug 24 2012 msAATTsuse.de- fixed 32bit arch check in KIWIXML constructor. For 32bit systems the generic arch name ix86 is used
* Fri Aug 24 2012 msAATTsuse.de- v5.04.4 released
* Fri Aug 24 2012 msAATTsuse.de- fixed kiwi --convert mode, no initrd is required for this call
* Fri Aug 24 2012 msAATTsuse.de- fixed qcow2 format creation. Invalid options are passed and option -c was missing to indicate compression
* Thu Aug 23 2012 rjschweiAATTsuse.de- implement the ignoreRepositories method using the imageConfig data structure
* this method will replace ignoreRepositories_legacy
* Thu Aug 23 2012 rjschweiAATTsuse.de- implement new addRepositories method
* replacing the addRepositories_legacy implementation- refactor the code that is used to figure out what profile data to modify as this code will be needed in any add
* implementation- unit tests for the new addRepositories method
* Thu Aug 23 2012 msAATTsuse.de- validate templates and examples
* Thu Aug 23 2012 msAATTsuse.de- update openSUSE 12.2 JeOS template. For some reason a dependency to kernel-debug exists when building openSUSE 12.2 images. If not specified explicitly this is an unwanted package thus I added it to the packages marked for deletion
* Wed Aug 22 2012 rjschweiAATTsuse.de- implement the new getRepositories method
* will replace getRepositories_legacy()
* returns array ref of KIWIXMLRepositoryData objects- implement unit test for new method- fix up code errors in __populateRepositoryInfo
* the initial implementation committed prev did not place the data in the appropriate profile information.
* Wed Aug 22 2012 rjschweiAATTsuse.de- change code organization to aid in the transition to the new data structure
* collect all _legacy code in an appropriately marked area of the module
* collect all code using the new data structure in an appropriately marked area of the module
* rename __checkProfiles to __checkProfiles_legacy
* rename __populateDefaultProfiles to __populateDefaultProfiles_legacy
* mark the imageConfig data structure dump method as private by prefixing __ to the name
* Wed Aug 22 2012 rjschweiAATTsuse.de- rename all repository related interfaces to
*_legacy
* this is in preparation for the implementation of the replacement methods that will access the imageConfig data structure and use the KIWIXMLRepositoryData object
* Wed Aug 22 2012 msAATTsuse.de- pass --partok option to isohybrid call
* Wed Aug 22 2012 msAATTsuse.de- adapt openSUSE 12.2 examples for plymouth and grub2 use
* Wed Aug 22 2012 msAATTsuse.de- fixed openSUSE 12.2 JeOS image, added systemd unit script to make sure the console login is showed and responsive
* Wed Aug 22 2012 rjschweiAATTsuse.de- add and implement the __populateRepositoryInfo method this method add repository data to the imageConfig data structure.
* Tue Aug 21 2012 msAATTsuse.de- make sure buildType is set when constructing a new KIWIXML object in KIWIImageCreator::prepareImage()
* Tue Aug 21 2012 rjschweiAATTsuse.de- implement KIWIXMLRepositoryData class
* this class holds information specified by the element and it\'s children () in the configuration file- implement unit tests for the new module- add new triggers and adjust existing triggers as appropriate
* Tue Aug 21 2012 msAATTsuse.de- cleanup KIWILog module, don\'t print state flags in log files
* Tue Aug 21 2012 msAATTsuse.de- moved imageConfig data dump into a function named dumpInternalXMLDescription and add the call as a comment to the code. Unfortunately added a loginfo message as part of the KIWIXML constructor causes many unit tests to fail
* Tue Aug 21 2012 msAATTsuse.de- use perl\'s data dumper to print the new internal imageConfig data structure to the log file
* Mon Aug 20 2012 msAATTsuse.de- make start of plymouth more quiet and react properly if the cmdline value \'quiet\' is specified (bnc #775830)
* Mon Aug 20 2012 msAATTsuse.de- cleanup duplicate package entries in SLE10 JeOS
* Wed Aug 15 2012 rjschweiAATTsuse.de- changed behavior of setActiveProfileNames
* when called with no argument this now resets that active profiles to the setting in the XML file. This type of dual behavior is somewhat evil from an OO perspective an dit may prove better to implement a resetActiveProfiles() in the future, we\'ll see how it turns out.- implement unit test for addDrivers method
* Tue Aug 14 2012 rjschweiAATTsuse.de- implement getArch/setArch methods
* allows to have influence on the architecture specific information for retrieval and addition of data to the XML object- refractor the valid profile names check into a private method
* verification of proper profile names is needed in 2 routines now and will be needed in any method that allows addition of profile specific information to the XML- implement new addDrivers method
* this allows to addDriver data to the XML, this completes the tie-in of the KIWIXMLDriverData object into the new structure- unit tests for get/setArch
* Mon Aug 13 2012 rjschweiAATTsuse.de- rename addDrivers to addDrivers_legacy
* this is in preparation for further integration of the new data structure- implement getActiveProfileNames and setActiveProfileNames
* with the XML restructure the constructor args will be reduced to just the validated XML, thus client code of the XML must have a way to set what profiles are active for information retrieval.- implement unit tests for the {g,s}etActiveProfileNames methods
* Mon Aug 13 2012 rjschweiAATTsuse.de- fix type for default profile in driver data population code
* drivers were added to the \"wrong\" profile due to the type. This incorrect profile was not accessed and thus the information got lost- integrate new KIWIXMLDriverData class into KIWIXML implementation
* rename getDriversNodeList to getDriversNodeList_legacy to indicate that this method is deprecated
* implement getDrivers method to return of XMLDriverData objects the objects are created based on information that is contained in the imageConfig data structure- implement unit test for the new getDrivers method
* Mon Aug 13 2012 rjschweiAATTsuse.de- implement setDescriptionInfo method on XML object ~ allow the information to be set programatically, this is needed for system migration when the configuration is created from scratch
* Mon Aug 13 2012 rjschweiAATTsuse.de- add a getOopsState method to the test log. This is needed to properly handle cases where oops and other message states over lap.
* Sun Aug 12 2012 rjschweiAATTsuse.de- implement a KIWIXMLFileData class
* this class is intended to be an abstract base class for any xml section that uses the element. It stores the name and arch attributes of the element. The class provides get and set methods.- implement a KIWIXMLDriverData class
* this class is derived from the KIWIXMLFileData class and will be used to store the information provided in the section.- implement unit test for KIWIXMLFileData- implement unit test for KIWIXMLDriverData- fix-up the pre-commit hook to register the code and set the Perl-critic severity levels, all new code (spare the .t files) is level 2 clean- add the trigger files and adjust existing trigger files to run the test on commit
* Sun Aug 12 2012 rjschweiAATTsuse.de- unit tests for new uniqueness check for archives, packages, and patterns
* Sun Aug 12 2012 rjschweiAATTsuse.de- add uniqueness checks for packages, archives, and patterns
* Thu Aug 09 2012 msAATTsuse.de- use device from device map only if it exists
* Thu Aug 09 2012 msAATTsuse.de- removed obsolete internal data $this->{bootpart}. the boot partition is always the first partition. Since that change this value is no longer useful
* Fri Aug 03 2012 msAATTsuse.de- fixed hybrid persistent mode when btrfs seed device is used. Unfortunately we are then running into the loop device bug mentioned in (bnc #764042). I hope this gets fixed soon in the loop and/or btrfs code
* Fri Aug 03 2012 msAATTsuse.de- v5.04.3 released
* Fri Aug 03 2012 msAATTsuse.de- DB: rebuild documentation
* Fri Aug 03 2012 msAATTsuse.de- update dropbear ssh documentation: Since debug_ssh.pub is used as the SSH file authorized_keys it is possible to specify serveral public ssh keys.
* Fri Aug 03 2012 msAATTsuse.de- v5.04.2 released
* Fri Aug 03 2012 msAATTsuse.de- DB: rebuild documentation
* Fri Aug 03 2012 msAATTsuse.de- DB: update docs about dropbear based ssh access into the boot image
* Fri Aug 03 2012 msAATTsuse.de- update rhel-
* oemboot code to the current suse-
* oemboot code
* Fri Aug 03 2012 msAATTsuse.de- changed support for dropbear ssh. we don\'t provide our own keypair but allow to integrate a user public key from the pxe server. The key must be stored in /KIWI and has to be named: debug_ssh.pub. for the default tftp download method this would result in the following path on the pxe server: /srv/tftpboot/KIWI/debug_ssh.pub
* Thu Aug 02 2012 msAATTsuse.de- update size for btrfs filesystem when building JeOS 12.2 iso
* Thu Aug 02 2012 msAATTsuse.de- remove cached repos for a new build. The repo setup for the package managers smart and yum are cleaned up at the end of each build by resetInstallationSource(). For zypper we makes an exception here and keep the repo setup for performance reasons. Thus at the beginning a a new prepare run we should clean up the repo files to rebuild the repos as they are specified in the kiwi XML description
* Thu Aug 02 2012 msAATTsuse.de- moved startDropBear() prior to the ELOG_BOOTSHELL check
* Thu Aug 02 2012 msAATTsuse.de- fixed rpmlint warnings about hidden and empty files
* Thu Aug 02 2012 msAATTsuse.de- make sure dropbear keys are installed with correct permissions
* Tue Jul 31 2012 msAATTsuse.de- netboot: added function pxePartitionSetupCheck() which is used to validate the PART information whether the requested partition sizes can be reached according to the size of the disk. This implements the request in (bnc #771592)
* Tue Jul 31 2012 msAATTsuse.de- changed the suse-12.2 JeOS template provided by kiwi to switch from clicfs to the new btrfs seed way (bnc #764042)
* Tue Jul 31 2012 msAATTsuse.de- added support for btrfs seed live ISO images. btrfs supports a nice COW machinery which allows us to point all write operations to a seed device. A similar technique is used with the clicfs filesystem but this one works in userspace via fuse. I have changed the suse-12.2 JeOS template provided by kiwi to use the new btrfs seed way. Of course the clicfs way also still exists. In order to use btrfs seed devices your iso type should look like the following example: 400 I got best results with lzo compression. One downside; up to now it\'s not possible to forecast/calculate how much size the btrfs image really will need. Thus the calculation kiwi does is in most cases too big for small images and for big ones sometimes too little. At the moment it\'s a try and error game to find out the minimum required size. The implementation add a ramdisk device as seed device to the btrfs mount and remount it read-write. This has worked fine and stable with the openSUSE 12.2 kernel (bnc #764042)
* Tue Jul 31 2012 msAATTsuse.de- fixed getSize and getBlocks functions to calculate with integer values. In addition to that the value of getBlocks was formerly passed to a dd call but this has changed to a qemu-img call. the seek value in the prior dd call was offset -1 which is wrong when using qemu-img
* Tue Jul 31 2012 msAATTsuse.de- added support for filesystem mount options during image build and later to become stored in the fstab file. The type attribute has been added, this is related to (bnc #764042)
* Mon Jul 30 2012 msAATTsuse.de- don\'t create an instance of KIWILog other than the global one in: KIWILocator,KIWIRuntimeChecker and KIWIXMLValidator
* Mon Jul 30 2012 msAATTsuse.de- don\'t create an instance of KIWILog other than the global one in KIWIXMLDescriptionData
* Mon Jul 30 2012 msAATTsuse.de- v5.04.01 released
* Sat Jul 28 2012 rjschweiAATTsuse.de- implement the getDescriptionInfo method in the XML object. The method uses the new KIWIXMLDescriptionData object, which gets created based on the data in the imageConfig datastructure- implement unit test for the getDescriptionInfo method
* Fri Jul 27 2012 msAATTsuse.de- fixed split setup when no persistent data is configured. In this case there is no read-write portion which caused an error on creation of the split disk
* Thu Jul 26 2012 msAATTsuse.de- read reference mbrid file from inside the initrd and not from the attached disk devices. The matching of the ID must happen by a reference value from the loaded initrd and the data read from the MBR of all attached disks- make sure a new mbrid is written for disk based installation images created when installstick=\"true\" is set.- identify the disk installation device via the same method used to identify the bios boot device: searchBIOSBootDevice. This allows to put disk install media not only on USB sticks but also on e.g SD cards or other disk devices- fixed grub2 setup for graphics boot of disk based installation images- set kernel log level to 6 by default- make sure mbrid exists in initrd for disk images. This is done by the new setupBootFlags function
* Thu Jul 26 2012 msAATTsuse.de- perform a qualified import of KIWIQX in kiwi.pl
* Wed Jul 25 2012 msAATTsuse.de- fixed creation of install sticks without system image
* Mon Jul 23 2012 msAATTsuse.de- store the mbrid file in /boot and not in /boot/grub. The location is misleading if another than the grub bootmanager is used
* Fri Jul 20 2012 msAATTsuse.de- add initial new-root directories according to the used package manager (bnc #743844)
* Thu Jul 19 2012 rjschweiAATTsuse.de- add and data to the new imageConfig structure- renamed following functions as legacy code:
* getProfiles => getProfiles_legacy
* __populateTypeInfo => __populateTypeInfo_legacy
* __populateProfiles => __populateProfiles_legacy
* Wed Jul 18 2012 rjschweiAATTsuse.de- implement unit test for new XMLDescriptionData object- register new code in the commit-hook- add new triggers for the new test code and the new object- add new unit test to existing triggers
* Wed Jul 18 2012 rjschweiAATTsuse.de- add new object KIWIXMLDescriptionData which provides get/set methods for the element
* Wed Jul 18 2012 rjschweiAATTsuse.de- add an oops method to the test log
* this implements the oops interface of the KIWILog object to allow unit tests to handle this condition
* Wed Jul 18 2012 msAATTsuse.de- fixed grub2 chainloader setup
* Wed Jul 18 2012 msAATTsuse.de- fixed mkisofs application ID setup when calling kiwi --installcd manually
* Wed Jul 18 2012 rjschweiAATTsuse.de- New consistency check for package specification
* At present the user can specify packages to be installed for a given image type even if this image type is not defined. While the packages get ignored and no harm is done, the superfluous specification is confusing and the XML definition is for all intent and purposes inconsistent.- Unit tests for new consistency check
* Wed Jul 18 2012 rjschweiAATTsuse.de- fix validation test configuration files to meet new stricter consistency requirements
* Wed Jul 18 2012 msAATTsuse.de- added support for EFI boot with grub2 for install ISO media live iso media is still not EFI capable. In order to use EFI boot you have to bootinclude the grub2-efi package: ... kiwi will check if there are efi modules inside the initrd and will then setup either a multiboot (iso) or plain gpt based image (bnc #771327)
* Wed Jul 18 2012 msAATTsuse.de- show ssh login message only if an ip address was assigned
* Wed Jul 18 2012 msAATTsuse.de- netboot: fixed use of multicast for compressed images. With commit 7a7389f2e3f2b3d92b38c08455b0c6da15569269 support for multicast based transfer of compressed images was added. Thus the checks which disable it are obsolete now (bnc #771898)
* Wed Jul 18 2012 msAATTsuse.de- added support for EFI boot with grub2 for the disk based image types oem and vmx (bnc #771327)
* Tue Jul 17 2012 msAATTsuse.de- fixed check for disk in main::mount() function. searching for the string \'boot sector\' also applies to the file output from a boot partition. The patch will call blkid on the given file or device and assumes a disk if no block id information exists
* Mon Jul 16 2012 msAATTsuse.de- DB: rebuild documentation
* Mon Jul 16 2012 msAATTsuse.de- DB: update documentation, add some information about the clic_udf feature as well as the support for ssh into the boot image. Also removed some obsolete data about aufs
* Mon Jul 16 2012 msAATTsuse.de- added support for ssh access into the boot image (initrd). Of course this requires an active network connection which is by design possible in the netboot and oemboot (in PXE boot mode) boot images. So the following is not supported for the isoboot and vmxboot boot images because they don\'t setup a network. The feature is based on the dropbear ssh server because it\'s so small to fit into an initrd. In order to have dropbear in the boot image you have to add the following to the system image configuration: and make sure one of your repos provides it. It\'s required to be in debug mode to be able to access the initrd. Thus you have to boot with \'kiwidebug=1\' enabled. In order to access the initrd passwordless via ssh kiwi provides a key pair whereas the pubkey is stored in the authorized_keys file inside the oem- and netboot images for all supported OS versions: ssh -i /usr/share/kiwi/keys/id_dropbear rootAATT For openSUSE >= 12.2 rsync is available in the netboot and oemboot boot images. For older versions it might be required to add tool packages bootincluded to be able to extract data from the boot image via ssh easily. In order to copy e.g the boot log file the following command can be used if rsync exists in the boot image: RSYNC_RSH=\'ssh -i /usr/share/kiwi/keys/id_dropbear -l root\' rsync -avz :/var/log/boot.kiwi .
* Mon Jul 16 2012 msAATTsuse.de- fixed copy of overlay files for boot images (initrd). make sure hidden files like e.g root/.ssh are handled correctly
* Mon Jul 16 2012 msAATTsuse.de- avoid double slashes (//) in zypper repo files
* Sat Jul 14 2012 msAATTsuse.de- follow up fix for the change of the zypper repo handling. The repo meta data will stay on the host again but is going to be re-used to prevent unneeded reloading of repo metadata
* Fri Jul 13 2012 msAATTsuse.de- fixed spec file to write openSUSE instead of OpenSuSE (bnc #770825)
* Fri Jul 13 2012 msAATTsuse.de- changed the way how zypper repos are used. move the repo data including cache data into the image root directory instead of storing this information in /var/cache/kiwi/zypper on the build host. On the build host we only store a shared package cache in /var/cache/kiwi/packages. This allows to keep the repo meta data per image and thus it can be re-used on operations like kiwi --upgrade which speed up the build as this is called as part of the the kiwi --create step too
* Fri Jul 13 2012 adrianAATTsuse.de- map openSUSE 12.3 to 12.2 configs for now- reformated spec file by current spec_file_formater
* Fri Jul 13 2012 msAATTsuse.de- added kernel boot option \'disableProgressInfo=1\' which allows to deactivate the progress information when the image download or install starts (bnc #771104)
* Thu Jul 12 2012 msAATTsuse.de- added support for live systems larger than 4G by using the udf filesystem. In order to active this make sure you have set flags=\"clic_udf\" (bnc #770703)
* Thu Jul 12 2012 msAATTsuse.de- fixed use of grub2, with version 2.x there is no grub2-setup anymore but a grub2-bios-setup. This change was introduced with openSUSE 12.2 RC1
* Thu Jul 12 2012 msAATTsuse.de- v5.03.34 released
* Thu Jul 12 2012 msAATTsuse.de- follow up spec file fix, list grub2-branding-openSUSE only for suse version > 12.1 in the media requires
* Thu Jul 12 2012 msAATTsuse.de- v5.03.33 released
* Thu Jul 12 2012 msAATTsuse.de- fixed spec file to write openSUSE instead of openSuSE (bnc #770825)
* Thu Jul 12 2012 msAATTsuse.de- added grub2-branding-openSUSE to the media requires
* Tue Jul 10 2012 msAATTsuse.de- v5.03.32 released
* Mon Jul 09 2012 adrianAATTsuse.de- fix dependencies on SLES 11 (sed does not support -E, use perl instead)
* Fri Jul 06 2012 msAATTsuse.de- v5.03.31 released
* Fri Jul 06 2012 msAATTsuse.de- fixed type in spec file, missing %endif
* Fri Jul 06 2012 msAATTsuse.de- v5.03.30 released
* Fri Jul 06 2012 msAATTsuse.de- netboot: fixed openSUSE 12.2 boot image description. bootstrap was only applied to in diskless profile mode. This leed to missing tools like gettext and dialog for all other profiles even the default profile
* Fri Jul 06 2012 msAATTsuse.de- fixed spec file: netboot and isoboot needs virt-utils additionally does isoboot need e2fsprogs
* Wed Jul 04 2012 msAATTsuse.de- v5.03.29 released
* Wed Jul 04 2012 msAATTsuse.de- don\'t remove rpm and fonts required in the pxe examples
* Wed Jul 04 2012 msAATTsuse.de- added missing fonts and X11 input packages to pxe 12.1 example
* Tue Jul 03 2012 msAATTsuse.de- libproxy reads the data from /etc/sysconfig/proxy. Thus it\'s required to hold a temporary copy of that file inside the chroot to make use of proxy settings while operating in the chroot
* Mon Jul 02 2012 msAATTsuse.de- v5.03.28 released
* Mon Jul 02 2012 msAATTsuse.de- make sure possible proxy setting is transfered to the kiwi chroot
* Mon Jul 02 2012 rjschweiAATTsuse.de- add profile handling in new data structure to handle XML data
* This is the beginning of the XML object restructuring effort as dicussed on the list. This initial commit in the series adds the members for the new data structure and ties parts of the profile handling code to the new implementation.
* Mon Jul 02 2012 msAATTsuse.de- don\'t call resetBootBind using chroot to workaround (bnc #769634)
* Sat Jun 30 2012 rjschweiAATTsuse.de- make kiwi_default a reserved profile name
* for the new data structure for XML processing we need a profile name to store unqualified data, this name was chosen to be kiwi_default. Therefore this is a reserved name and users may not use it as a profile name.
* Fri Jun 29 2012 msAATTsuse.de- v5.03.27 released
* Fri Jun 29 2012 msAATTsuse.de- fixed hybrid persistent writing with kernel 3.x (bnc #769086)
* Thu Jun 28 2012 msAATTsuse.de- netboot: dhcpcd works with timeout 20s, kiwi used 40s, so one half of the time it waited with no reason. This patch runs \'dhcpcd -T\' again after 22s, so the time is used effectively. It also helps in situatios when the link needs more time to start, e.g with wpa_supplicant and the first dhcp packets are lost.
* Thu Jun 28 2012 rjschweiAATTsuse.de- fix the getPXEDeployConfiguration unit test on ppc and ppc64
* Wed Jun 27 2012 msAATTsuse.de- zypper in 12.2 has been fixed now, so we can change back the JeOS image template to the type=\"image\" installation
* Wed Jun 27 2012 msAATTsuse.de- v5.03.26 released
* Wed Jun 27 2012 msAATTsuse.de- added patterns for removal of unused files/dirs which appears along with systemd,grub2,plymouth and are not required inside the initrd
* Wed Jun 27 2012 msAATTsuse.de- fixed evaluation of glob patterns in kiwi_strip_delete
* Tue Jun 26 2012 msAATTsuse.de- remove references to splashy from initrd
* Tue Jun 26 2012 msAATTsuse.de- the post install script from grub2-branding-openSUSE creates a background.png file in /boot. We have to preserve all data created in /boot because the extractKernel() function moves out all the data here from the initrd
* Tue Jun 26 2012 msAATTsuse.de- hide plymouth splash when throwing an exception
* Tue Jun 26 2012 msAATTsuse.de- fixed evaluation of bootincluded packages in type specific packages sections
* Tue Jun 26 2012 msAATTsuse.de- update openSUSE 12.2 JeOS template. With 12.2 the switch to grub2 was made but the grub2-branding-openSUSE package only provides grub2 theming information. Thus for building non grub2 based images like isolinux based live systems the former gfxboot-branding-openSUSE data has to be present. Because of this the openSUSE 12.2 JeOS template includes now image type specific packages sections to select the correct branding package
* Tue Jun 26 2012 msAATTsuse.de- make grub2 theming data available in the initrd
* Tue Jun 26 2012 msAATTsuse.de- fixed string validation in info message in KIWICollect so that it actually shows the content of $metapack
* Tue Jun 26 2012 msAATTsuse.de- remove import of graphics boot \'message\' file when using grub2 In order to support custom branding in kiwi for grub it worked the way that one provides the theme data and together with gfxboot-devel a special formatted \'message\' file was created and stored inside the initrd. The setupBootLoaderStages() function then imported that file to the system image. In grub2 the theme data is just fonts and png\'s and there is no creation of a special graphics format required.
* Tue Jun 26 2012 msAATTsuse.de- hide plymouth splash when showing a dialog
* Tue Jun 26 2012 msAATTsuse.de- switched to grub2-branding-openSUSE for openSUSE 12.2 JeOS template
* Tue Jun 26 2012 msAATTsuse.de- grub2 can handle real spaces in menu items, yeah :)
* Tue Jun 26 2012 msAATTsuse.de- added grub2 theme support for the openSUSE theme layout
* Tue Jun 26 2012 msAATTsuse.de- better info message when --targetstudio option is used
* Tue Jun 26 2012 msAATTsuse.de- provide ROOTFS_BLKDEV before calling init/systemd- don\'t export variables used by the boot scripts in the cleanImage function. This function is called in an extra shell process thus exporting back is not possible
* Tue Jun 26 2012 msAATTsuse.de- fixed resizeFilesystem to prefer btrfs over btrfsctl
* Tue Jun 26 2012 msAATTsuse.de- added variable kiwi_cpio_name which allows to access the name of the initrd image from within the initrd. This is currently used to distinguish the initrd by the type of the distro
* Mon Jun 25 2012 msAATTsuse.de- netboot: improved testing for networks by using -T option
* Mon Jun 25 2012 msAATTsuse.de- fixed createOriginSnapshot to prefer btrfs over btrfsctl
* Mon Jun 25 2012 msAATTsuse.de- preserve missing btrfs tools
* Mon Jun 25 2012 rjschweiAATTsuse.de- indicate check failure through return value (undef)
* we should have it correct now. Previously a 1 was returned, indicating success. This change returns no value on failure to indicate the failed state of the check.
* Sat Jun 23 2012 msAATTsuse.de- v5.03.25 released
* Sat Jun 23 2012 msAATTsuse.de- fixed __checkVMscsiCapable() it\'s a valid setup if no machine configuration is specified in the kiwi XML
* Fri Jun 22 2012 toganmAATTsuse.de- fix the suse-live-usbstick config according to the version
* Fri Jun 22 2012 msAATTsuse.de- v5.03.24 released
* Fri Jun 22 2012 msAATTsuse.de- make sure getExecPath() also works when invoked as non root user. It\'s required that PATH contains /sbin to locate binaries used by kiwi with the \'which\' tool. This problem appeared when calling the unit tests as non root user like the buildservice does when building packages, thus this fixes the build
* Fri Jun 22 2012 msAATTsuse.de- v5.03.23 released
* Fri Jun 22 2012 msAATTsuse.de- fixed boot logging, make sure the log continues after switching to the real root filesystem
* Fri Jun 22 2012 msAATTsuse.de- added runtime check for get_kernel_version binary. This is a suse only extension so when running on other build hosts it should be checked if it\'s there.
* Fri Jun 22 2012 msAATTsuse.de- added uninstall target to Makefile
* Fri Jun 22 2012 msAATTsuse.de- make udevStart() aware of alternative location for udevd binary
* Fri Jun 22 2012 msAATTsuse.de- make sure kmod stays in the initrd, with respect to other distros which already moved from module-init-tools to kmod
* Fri Jun 22 2012 msAATTsuse.de- fixed udevSystemStart / udevSystemStop to check which system service manager can be used to run the service
* Fri Jun 22 2012 msAATTsuse.de- removed kernel sysconfig template check, that\'s a suse only check and even we change our own names all the time
* Thu Jun 21 2012 msAATTsuse.de- v5.03.22 released
* Thu Jun 21 2012 rneuhauserAATTsuse.de- kiwi.pl: simpler date(1) use. calling \'date -I\' is insensitive to locale which means:
* LANG=POSIX is not needed, thus
* explicit bash invocation is not needed (it was there because the syntax for setting env. vars varies among shells
* Thu Jun 21 2012 msAATTsuse.de- fixed date call in usage() function to work with native qx
* Thu Jun 21 2012 rjschweiAATTsuse.de- clean up to perl critic level 4- disable the brief file open/close check
* this check is unreliable when using multiple open/close constructs in one routine.
* Thu Jun 21 2012 rjschweiAATTsuse.de- remove duplicate implementation of method to get a list of packages marked for boot inclusion. The methods getListBootIncludes() and getBootIncludes() used to implement the same functionality. This update removes the getListBootIncludes() method.
* Thu Jun 21 2012 rjschweiAATTsuse.de- add profile handling verification to the package and type unit tests
* Thu Jun 21 2012 rjschweiAATTsuse.de- add additonal condition to avoid warning
* At present it is possible to trigger a \"uninitialized value\" warning when calling the addPackages() method, if not all packages that are to be added are boot included. This change fixes this issue.
* Wed Jun 20 2012 msAATTsuse.de- fixed spec file, require grub2 for >= openSUSE 12.2
* Wed Jun 20 2012 msAATTsuse.de- update migration table
* Wed Jun 20 2012 rjschweiAATTsuse.de- clean to critic level 3
* Wed Jun 20 2012 rjschweiAATTsuse.de- clean to critic level 4
* Wed Jun 20 2012 rjschweiAATTsuse.de- do not attempt to normalize a path that has not been defined to begin with
* Wed Jun 20 2012 rjschweiAATTsuse.de- clean to perlcritic level 4
* critic exception around the unify function
* style clean up to more closely resemble the rest of kiwi code
* Wed Jun 20 2012 msAATTsuse.de- added get_kernel_version source into kiwi git. We might want to install this tool on distros which doesn\'t provide it
* Wed Jun 20 2012 rjschweiAATTsuse.de- modify the default critic policy for brief open
* by default a close() is expected within 9 lines of an open call. Accounting for potential kiwi logging information and other coding constructs we use this is ofetn insufficient. Therefore a line limit of 15 is a bit more reasonable for the kiwi code base
* Wed Jun 20 2012 rjschweiAATTsuse.de- add XML unit tests for type handling
* Wed Jun 20 2012 msAATTsuse.de- use strip section in RHEL JeOS template to remove some unneded data not required in the initrd
* Tue Jun 19 2012 msAATTsuse.de- v5.03.21 released
* Tue Jun 19 2012 msAATTsuse.de- remove bootsplash from the delete section in the openSUSE 12.2 boot image descriptions, bootsplash is no longer installed thus it doesn\'t make sense to list it in the delete sections
* Tue Jun 19 2012 msAATTsuse.de- make sure JeOS for 12.2 installs glibc-locale
* Tue Jun 19 2012 msAATTsuse.de- small cleanup for info message
* Tue Jun 19 2012 msAATTsuse.de- update JeOS 12.2 image description, install in bootstrap because zypper in 12.2 is so flaky and bugy throwing segfaults all the time and nobody cares about it :(
* Tue Jun 19 2012 msAATTsuse.de- added grub2 to openSUSE 12.2 boot image descriptions
* Tue Jun 19 2012 msAATTsuse.de- use bootstrap only installation for openSUSE 12.2 boot images
* Tue Jun 19 2012 msAATTsuse.de- s390: make sure we wait for udev to finish after fdasd is done
* Tue Jun 19 2012 msAATTsuse.de- use grub2 as bootloader for openSUSE 12.2 JeOS except for xenFlavour
* Tue Jun 19 2012 msAATTsuse.de- fixed grub2-mkimage call, target format of core image must be set
* Tue Jun 19 2012 msAATTsuse.de- add plymouth to JeOS image description
* Tue Jun 19 2012 msAATTsuse.de- cleanup list of image packages selected in the openSUSE 12.2 boot image descriptions. The ones removed here were already installed by the selection/requirements of the bootstrap packages section
* Tue Jun 19 2012 msAATTsuse.de- switched from bootsplash to plymouth splash screen in the openSUSE 12.2 JeOS template
* Tue Jun 19 2012 msAATTsuse.de- added required plymouth packages to boot descriptions for openSUSE 12.2
* Tue Jun 19 2012 msAATTsuse.de- added support for plymouth splash system
* Mon Jun 18 2012 msAATTsuse.de- netboot: added more sophisticated partition table check. The partition table is analyzed to check if it\'s possible to run the update check and also to verify partition order, types and sizes with some tolerance (so for example the change to 4k sectors would not cause repartitioning). Additionally in a RAID setup the checks would check both disks.
* Mon Jun 18 2012 msAATTsuse.de- remove references to splashy
* Fri Jun 15 2012 msAATTsuse.de- v5.03.20 released
* Fri Jun 15 2012 msAATTsuse.de- fixed unit test due to changes in the logging
* Fri Jun 15 2012 msAATTsuse.de- v5.03.19 released
* Fri Jun 15 2012 rjschweiAATTsuse.de- additional unit tests for package handling in the XML object
* Fri Jun 15 2012 msAATTsuse.de- added lxc as a recommended package to the spec file
* Fri Jun 15 2012 rjschweiAATTsuse.de- rename the getTypeList method to getTypeSpecificPackageList
* the method returns a list of packages for the given image build type. This was not obvious from the previous method name.
* Fri Jun 15 2012 msAATTsuse.de- call images.sh and config.sh scripts in a contained environment using LXC. The function callContained() will use lxc if it is installed on the build host machine. If it is not there or lxc-execute cannot be called the function switches to the legacy chroot method. Using a container to call custom scripts provides more protection against the nasty things one can do in a script with root permission
* Thu Jun 14 2012 msAATTsuse.de- don\'t umount dev and sys filesystems in umountSystemFileSystems this is done by kiwi in the cleanup phase
* Thu Jun 14 2012 msAATTsuse.de- fixed logging, use only one global log object which is used by all objects to make sure all messages end up in the same log file
* Thu Jun 14 2012 rjschweiAATTsuse.de- more unit tests for XML
* Thu Jun 14 2012 msAATTsuse.de- v5.03.18 released
* Thu Jun 14 2012 msAATTsuse.de- v5.03.17 released
* Thu Jun 14 2012 msAATTsuse.de- s390: sleep for a while after recreating the vtoc table
* Thu Jun 14 2012 rjschweiAATTsuse.de- clean KIWICommandLine.pm and KIWIQX.pm to perlcritic level 4
* all other file changes to properly import the symbols from KIWIQX
* Thu Jun 14 2012 rjschweiAATTsuse.de- exclude additional unit tests in OBS as they need network access
* Wed Jun 13 2012 msAATTsuse.de- reread partition table after recreation of the VTOC table
* Wed Jun 13 2012 msAATTsuse.de- s390: initialize loader variable with zipl by default
* Wed Jun 13 2012 msAATTsuse.de- s390 netboot: recreated the vtoc table with option \'r\' instead of \'u\' which includes the deletion all partitions
* Wed Jun 13 2012 msAATTsuse.de- added function umountSystemFileSystems() which is used to umount system filesystems like proc within the given root tree. This is called after a custom script call to cleanup the environment
* Wed Jun 13 2012 msAATTsuse.de- s390: fixed normalizeRepartInput to work with fdasd
* Wed Jun 13 2012 msAATTsuse.de- provide a pointer to the xml to createImageFormat() which allows to only create the machine configuration without direct access to the image file for reading the xml data
* Wed Jun 13 2012 rjschweiAATTsuse.de- clean the unit test implementations to perlcritic level 4
* Wed Jun 13 2012 rjschweiAATTsuse.de- switch back to perl-Test-Unit
* the package has been fixed and is back in factory/oS 12.2
* Wed Jun 13 2012 rjschweiAATTsuse.de- set the db45-utils package as recommend for openSUSE 12.1 and later
* at present a user running into a rpm db incompatibility issue may get an error message that the db45_load tool is not available. This leaves the user with no idea where the tool may be found. Unfortunately the command-not-found utility does not turn up the command either. Setting the package as recommends increases the chance that it will be installed when KIWI packages get installed.
* Tue Jun 12 2012 msAATTsuse.de- overlooked one format conversion call and make them skip if in --targetstudio mode
* Tue Jun 12 2012 msAATTsuse.de- fixed building of md5 sum and compressed image when in --targetstudio mode. In this mode we don\'t dump an image from the generated target device, thus the building of the md5 sum and the compressed version of the image must access the device
* Tue Jun 12 2012 adrianAATTsuse.de- require u-boot-tools for oem images on arm
* Tue Jun 12 2012 msAATTsuse.de- instead of skipping the entire format conversion when in--targetstudio mode we only skip the creation of the format but not the meta data which belongs to it
* Tue Jun 12 2012 msAATTsuse.de- skip format conversion when in --targetstudio mode
* Tue Jun 12 2012 rjschweiAATTsuse.de- remove duplicate implementation of buildImageName method
* the buildImageName was implemented in the XML and the Image object. This change removes the duplicate implementation and moves the method with the generateBuildImageName into the Global object. It is expected that a better place will be found eventually.
* Tue Jun 12 2012 msAATTsuse.de- don\'t use value of --targetstudio when building iso images
* Tue Jun 12 2012 msAATTsuse.de- fixed --targetdevice mode to work with NBD/AoE devices as well. if a network block device receives a partition table there is no automatic creation creation of devices per partition. Thus it\'s required to call kpartx to bind those devices prior to using it
* Tue Jun 12 2012 rjschweiAATTsuse.de- additional unit tests for package handling- skip tests that require network access- fix up tests to verify network resolve for local test runs
* Tue Jun 12 2012 rjschweiAATTsuse.de- add Environment variable to allow tests that require network access to be skipped in OBS
* Tue Jun 12 2012 rjschweiAATTsuse.de- make resolveLink and resolveArchitecture \"private\"
* these methods should not be called from outside of the XML object, and most likely this should not be here to begin with
* Mon Jun 11 2012 msAATTsuse.de- added option --targetstudio which is used to specify a program which creates the target device node to create the image on. In contrast to the targetdevice option there will be no image file dumped from the specified device. This option is mainly used in SuSE Studio
* Mon Jun 11 2012 msAATTsuse.de- don\'t use dd when reading data from a disk block device use qemu-img convert instead which takes care for sparse information
* Mon Jun 11 2012 msAATTsuse.de- setupEncoding ist not called if a targetdevice is specified instead of the standard loop device operations. Thus luks extension together with --targetdevice did not work. This patch fixes it
* Mon Jun 11 2012 msAATTsuse.de- call fdasd relatively and not with absolute path
* Mon Jun 11 2012 msAATTsuse.de- remove logging of hijacked studio commands
* Mon Jun 11 2012 msAATTsuse.de- allow createImageXFS to work with a target device
* Mon Jun 11 2012 rjschweiAATTsuse.de- unit tests for XML object verifying package, pattern, and archive handling
* Fri Jun 08 2012 msAATTsuse.de- v5.03.16 released
* Fri Jun 08 2012 msAATTsuse.de- removed the ZYPP_ARIA2C=0 \'hack\' which is there only because of a bug in aria2c we\'d better fix aria2c instead of maintaining a workaround for that inside kiwi.
* Fri Jun 08 2012 msAATTsuse.de- make sure timezone package is installed as part of the bootstrap installations. zypper in openSUSE 12.2 crashes if it can\'t find /etc/localtime. A bug for this problem has been opened. As it seems zypper requires a timezone we should make sure to install one from within bootstrap
* Fri Jun 08 2012 msAATTsuse.de- v5.03.15 released
* Fri Jun 08 2012 msAATTsuse.de- Revert \"- the env setting ZYPP_ARIA2C=0 caused a segmentation fault\" problem is that this change caused other unexpected behavior in zypper :( I will investigate more here
* This reverts commit 31e0d0cadfdc9f678e9675754e83674054d29d83
* Fri Jun 08 2012 msAATTsuse.de- just found out that also obs:// URL\'s doesn\'t work for plain package building inside the buildservice. So I had to change the unit tests again
* Fri Jun 08 2012 msAATTsuse.de- the env setting ZYPP_ARIA2C=0 caused a segmentation fault for zypper in openSUSE 12.2. I think if there is a bug in aria2c we\'d better fix aria2c instead of work around that inside kiwi. Therefore I removed this \'hack\'
* Fri Jun 08 2012 msAATTsuse.de- don\'t use remote URL\'s other than obs:// in the unit tests the buildservice refused to resolve them so the unit tests works locally but not during build, thus the package build fails
* Fri Jun 08 2012 msAATTsuse.de- v5.03.14 released
* Thu Jun 07 2012 rjschweiAATTsuse.de- unit test for prefer-license attribute setting unique requirement
* Thu Jun 07 2012 dmajdaAATTsuse.de- Fixed deleting of /usr/lib/gconv content in baseStripLocales The \"find\" command in baseStripLocales finds not only files in /usr/lib/gconv, but also the directory itself which cannot be removed by the call of \'rm\' in that case
* Thu Jun 07 2012 rjschweiAATTsuse.de- check that the prefer-license attribute is set to true only once
* if the attribute is set to true multiple times it results in an ambiguity that cannot be resolved. As the outcome of the image build is indeterminate in this case we need to error out of the process.
* Wed Jun 06 2012 msAATTsuse.de- cleanup kernel profiles: For openSUSE -base is a subset of !-base
* Wed Jun 06 2012 msAATTsuse.de- netboot: allow multicast TFTP for compressed images (fate #313083)
* the predownload hook detects that it is possible to use service partition for intermediate files and exports the temp dir path in $FETCH_FILE_TEMP_DIR
* the fetchfile() method uses the temp directory and exports the intermediate file path in $FETCH_FILE_TEMP_FILE if it was created
* the postdownload hook deletes $FETCH_FILE_TEMP_FILE. Later we can extend it to manage a cache of several image files.
* Wed Jun 06 2012 msAATTsuse.de- netboot: added robust detection of the active network interface
* call dhcpcd on all available network interfaces and select either BOOTIF from pxe or one of the interfaces which got a dhcp reply (fate #313338)
* Wed Jun 06 2012 msAATTsuse.de- DB: rebuild schema documentation
* Wed Jun 06 2012 msAATTsuse.de- adapt schema version from 5.3 to 5.4 for unit test data
* Wed Jun 06 2012 rjschweiAATTsuse.de- unit test for getRepoNodeList
* Wed Jun 06 2012 rjschweiAATTsuse.de- unit tests related to driver handling
* Wed Jun 06 2012 msAATTsuse.de- apply stylesheet conversion from schema 5.3 to 5.4
* Wed Jun 06 2012 msAATTsuse.de- added xsl stylesheet which removes the type attribute from the sections and also increases the schema version from 5.3 to 5.4
* Wed Jun 06 2012 rjschweiAATTsuse.de- rename addRepository to addRepositories
* the method may be used to add multiple repositories, this should be reflected in the method name.
* Wed Jun 06 2012 msAATTsuse.de- DB: rebuild documentation
* Wed Jun 06 2012 msAATTsuse.de- DB: update documentation due to removal of the drivers type attribute
* Wed Jun 06 2012 msAATTsuse.de- remove type attribute from drivers section entirely
* Tue Jun 05 2012 msAATTsuse.de- DB: rebuild schema documentation
* Tue Jun 05 2012 msAATTsuse.de- DB: rebuild documentation
* Tue Jun 05 2012 msAATTsuse.de- update documentation due to change in the type attribute in the drivers sections
* Tue Jun 05 2012 msAATTsuse.de- don\'t evaluate type of drivers sections. There is only type \'drivers\' now available
* Tue Jun 05 2012 msAATTsuse.de- remove use of netdrivers,scsidrivers,usbdrivers typed drivers sections and merge them into one section
* Tue Jun 05 2012 msAATTsuse.de- limit type attribute of drivers section to \'drivers\'
* Tue Jun 05 2012 rjschweiAATTsuse.de- add unit tests for repo handling in the XML object
* Tue Jun 05 2012 rjschweiAATTsuse.de- add argument check to addRepository() method at present it is possible to attempt to add a repository with an invalid type. This may lead to unpredictable behavior during build. While the type is verified when given on the command line, the additional validation is needed for migration when we add repos from a running system.
* Tue Jun 05 2012 rjschweiAATTsuse.de- add log message for repository replacement at present no message is issued if a replacable repository is replaced with a new repository
* Tue Jun 05 2012 rjschweiAATTsuse.de- add info message when repositories are being ignored
* Tue Jun 05 2012 rjschweiAATTsuse.de- add doc string to the prefer-license attribute in the schema documentation. Previously there was no documentation and the name was not necessarily obviously implying the intension of the attribute.
* Tue Jun 05 2012 rjschweiAATTsuse.de- added unit tests for:
* getStripNodeList() method of XML object
* getConfigName() method of XML object
* Tue Jun 05 2012 rjschweiAATTsuse.de- comment out variable that is only used for debug printing
* Tue Jun 05 2012 rjschweiAATTsuse.de- rename of functions:
* getNodeList() to getRepoNodeList() the getNodeList name is too generic and does not indicate by name what can be expected about the information returned by the method
* getRepository() method to getRepositories() the method returns all repository information, thus this should be reflected in the method name
* Tue Jun 05 2012 msAATTsuse.de- DB: update schema documentation include info about new XML element
* Mon Jun 04 2012 rjschweiAATTsuse.de- do not call the test log internal __reset() method. calling __reset() would ignore any potential other states and therefore would ignore potential error conditions. Calling getState() instead and ignoring the returned value ensures that only one state is set in the log as expected after calling the getErrorState() method.
* Mon Jun 04 2012 rjschweiAATTsuse.de- remove unused variable pblt
* Mon Jun 04 2012 rjschweiAATTsuse.de- unit test for new element
* Mon Jun 04 2012 rjschweiAATTsuse.de- DB: rebuild documentation: include info about new XML element
* Mon Jun 04 2012 rjschweiAATTsuse.de- add new element
* allow users to specify a default location for pre-built boot images in the configuration file.
* Mon Jun 04 2012 rjschweiAATTsuse.de- re-sort the attributes of the type element into alpha order
* Mon Jun 04 2012 msAATTsuse.de- make sure return value from cleanupRPMDatabase() is passed correctly and handled
* Mon Jun 04 2012 msAATTsuse.de- v5.03.13 released
* Mon Jun 04 2012 msAATTsuse.de- really fixed cleanupRPMDatabase() by using the db_dump|db45_load method
* Mon Jun 04 2012 msAATTsuse.de- v5.03.12 released
* Sun Jun 03 2012 msAATTsuse.de- fixed test_invalidProfileRequest(), it modifies the message data thus it needs a reset to prevent after effects in subsequent tests
* Sun Jun 03 2012 msAATTsuse.de- perl Test::Unit doesn\'t work for 12.2 anymore. Other than that is\'s unmaintained since 2005. Therefore we switch to Test::Unit::Lite which is also not really maintained but at least still works
* Sat Jun 02 2012 rjschweiAATTsuse.de- unit tests for profile handling
* these do not test the usage of profiles, only the storage of profile data in the XML object and the consistency check upon profile request, usage will be integrated into other test at a later date
* Sat Jun 02 2012 rjschweiAATTsuse.de- make the checkProfiles method of the XML object \"private\"
* this is an XML internal helper method and should not be called by other modules
* Sat Jun 02 2012 rjschweiAATTsuse.de- unit test for XML object user data storage
* Sat Jun 02 2012 rjschweiAATTsuse.de- make the getVMConfigOpts method on the XML object \"private\"
* this is an internal helper method and should not be called from other modules
* Sat Jun 02 2012 rjschweiAATTsuse.de- make the getPreferencesNodeByTagName XML method \"private\"
* this is an XML object internal method and should not be called by other modules
* Fri Jun 01 2012 adrianAATTsuse.de- kernel-pae does only exists on i586/i686 architecture
* Fri Jun 01 2012 rjschweiAATTsuse.de- eliminate getXenDomain method from XML
* the domain is part of the Xen config and can be accessed via getXenConfig we should not have multiple methods to get the same data
* Fri Jun 01 2012 msAATTsuse.de- v5.03.11 released
* Thu May 31 2012 rjschweiAATTsuse.de- unit test for XML validation of the volume element test to verify that the combination of \"size\" and \"freespace\" on the element is rejected.
* Thu May 31 2012 rjschweiAATTsuse.de- do not allow the use of the \"size\" and \"freespace\" attributes in combination. At present a user can specify both the \"size\" and \"freespace\" attributes on the element. In this case the setting of the \"freespace\" attribute is ignored, therefore allowing the combination of the attributes is misleading and should be disallowed
* Thu May 31 2012 rjschweiAATTsuse.de- XML object unit tests for LVM related methods
* Thu May 31 2012 msAATTsuse.de- arm: renamed boot and JeOS images from suse-Factory to suse-12.2
* Thu May 31 2012 msAATTsuse.de- removed rt kernel profile, there is no kernel-rt for openSUSE
* Thu May 31 2012 msAATTsuse.de- fixed handling of obs URL path within KIWIURL. if the created obs path does not exist proceed and check again as opensuse URL type. This was done only in KIWIRoot but belongs to the URL module
* Thu May 31 2012 adrianAATTsuse.de- remove packages which do not exist in 12.2 anymore
* Wed May 30 2012 msAATTsuse.de- add empiric code to calculate size for btrfs images... not nice
* Wed May 30 2012 msAATTsuse.de- make sure btrfs based images provide a common subvolume setup as explained in (bnc #764703)
* Wed May 30 2012 rjschweiAATTsuse.de- unit test for addStrip method of XML object
* verify error condition of improper call
* verify proper addition for delete, libs, and tools
* Wed May 30 2012 rjschweiAATTsuse.de- fix addStrip method of XML object
* when adding new strip information we need to check if an element with the given type already exists, if yes the information needs to be added to the existing type. If a new element is added with the same type as an existing element the getStrip
*() implementations will not return the correct information. This is a latent bug.
* also added a consitency check to ensure the method only adds strip elements of supported types.
* Wed May 30 2012 rjschweiAATTsuse.de- add unit tests for XML getStrip
* methods
* Wed May 30 2012 rjschweiAATTsuse.de- make the getStripFileList of the XML object \"private\", this is an internal helper method and should not be called from other KIWI modules
* Wed May 30 2012 msAATTsuse.de- v5.03.10 released
* Wed May 30 2012 msAATTsuse.de- Revert \"- eliminate getXenDomain method from XML\" This breaks kiwi in KIWIXML.pm:getImageConfig() This reverts commit a2a9509c6ef44f09cdf2b8a271387de4bec071dc.
* Wed May 30 2012 msAATTsuse.de- v5.03.9 released
* Tue May 29 2012 msAATTsuse.de- allow direct root tree access for btrfs and xfs when creating the virtual disk. For those two filesystem we had the intermediate step to create a filesystem image first which is then dumped via dd on the virtual disk.
* Tue May 29 2012 adrianAATTsuse.de- enable PXE on arm platform, untested but PXE exists there and it is fixing building kiwi
* Tue May 29 2012 adrianAATTsuse.de- create additional -requires packages for each boot description to track dependencies automatically in the openSUSE buildservice
* Tue May 29 2012 msAATTsuse.de- eliminate the use of expr and use shell\'s $((..)) expression instead
* Sat May 26 2012 msAATTsuse.de- DB: rebuild documentation
* Sat May 26 2012 rjschweiAATTsuse.de- eliminate getXenDomain method from XML the domain is patr of the Xen config and can be accessed via getXenConfig we should not have multiple methods to get the same data
* Sat May 26 2012 rjschweiAATTsuse.de- unit test for OVF data storage in the XML object
* Fri May 25 2012 msAATTsuse.de- DB: rebuild documentation
* Fri May 25 2012 msAATTsuse.de- v5.03.8 released
* Fri May 25 2012 msAATTsuse.de- make sure resizeLVMVolumes unsets FSTYPE before fsresize
* Fri May 25 2012 rjschweiAATTsuse.de- add a reference to the online and local schema documentation
* a recent discussion on the mailing list revealed that there is no reference to the complete schema documentation in the docbook doc and not all available elements are listed in the docbook documentation
* Fri May 25 2012 msAATTsuse.de- apply oem dump and repart patches from x86 arch to ppc/s390 and arm. Reference commits are:
* e3cb127676f636b71d2a07acd7fdd4bc0bb6f332
* 8d15e715dcb156bf0b101c87e28ceb810d0f4eed
* Fri May 25 2012 rjschweiAATTsuse.de- DB: update documentation chapter 3
* update the chapter w.r.t. content, spelling, grammar
* add section to chapter 3 explaining the use of pre-built boot images in a recent discussion on the mailing list it was pointed out that the use of pre-built boot images is not documented
* Fri May 25 2012 msAATTsuse.de- fixed OEM partition selection for LVM images. If there are exactly two partitions suitable for the install process it\'s possible to assign boot and root partition according to the partition ID\'s from the OEM image partition table. Thus we can prevent a selection dialog in this case. Additionally this commit added more information about the reason why partitions are rejected
* Fri May 25 2012 msAATTsuse.de- make sure \'rev\' tool stays inside the initrd
* Fri May 25 2012 msAATTsuse.de- fixed OEM partition install mode for LVM images
* Fri May 25 2012 msAATTsuse.de- don\'t install unnecessary doc meta data
* Thu May 24 2012 msAATTsuse.de- added sync of schema docs to doc.opensuse.org
* Wed May 23 2012 msAATTsuse.de- added sync of docs to doc.opensuse.org
* Tue May 22 2012 msAATTsuse.de- v5.03.7 released
* Tue May 22 2012 msAATTsuse.de- make sure systemctl stay inside the initrd. That\'s because the reboot tool is now a link to systemctl
* Tue May 22 2012 msAATTsuse.de- v5.03.6 released
* Tue May 22 2012 msAATTsuse.de- fixed baseStripUnusedLibs to work with library links pointing to library links (bnc#753574)
* Tue May 22 2012 msAATTsuse.de- fixed baseStripUnusedLibs to work with library links pointing to an absolute path (bnc#753574)
* Mon May 21 2012 msAATTsuse.de- changed the way how the size request of LVM volumes in an oem image is processed. Before this patch the volumes were created with the requested size and stored in the image. Thus we store a lot of null bytes inside the image and also dump those null bytes when running the code of an oem install image. As the oem image by design expands itself on first boot according to the target disk and oem image configuration parameters, it\'s more clean and also faster to resize the volumes on first boot and not keep them with their requested size inside the image (bnc#761993)
* Mon May 21 2012 msAATTsuse.de- fixed fstab flags for non root device entries
* Mon May 21 2012 msAATTsuse.de- apply suse-repart patch for ppc, s390 and arm architecture reference commit: a621b4e715ac18e1daabb644a9b3b8af2e316d24
* Mon May 21 2012 msAATTsuse.de- make controller and id attributes optional in the vmdisk section
* Mon May 21 2012 msAATTsuse.de- added support for openSUSE 12.2 / removed 11.3
* added JeOS openSUSE 12.2 image template descriptions
* update spec file to support openSUSE 12.2 and remove 11.3
* added 12.2 boot image descriptions
* added openSUSE 12.2 examples
* Fri May 18 2012 msAATTsuse.de- DB: rebuild schema documentation
* Fri May 18 2012 msAATTsuse.de- DB: rebuild schema due to latest changes in .rnc
* Thu May 17 2012 rjschweiAATTsuse.de- remove superfluous () for variable declaration
* Thu May 17 2012 rjschweiAATTsuse.de- remove controller and id attribute settings from Xen example The controller and id attributes are not evaluated in the XML object for the Xen configuration, showing these settings in the examples is misleading to the user.
* Thu May 17 2012 rjschweiAATTsuse.de- add qualifiers to attribute description of the machine and vmdisk elements. At present it is not obvious which of the attributes are evaluated for a given Virtual Machine image format when looking at the Schema documentation. The qualifiers address this situation.
* Thu May 17 2012 rjschweiAATTsuse.de- added unit tests:
* unit test for getEc2Config method of XML object
* unit test for getVMwareConfig method of XML object
* unit test for getXenConfig method of XML object
* Wed May 16 2012 rjschweiAATTsuse.de- add the proper IP address to the Web-UI (sunstone) configuration file ~ presently the user has to manually change the configuration file and restart the server. This change eliminates this need, after the cloud is up and running the user can just access the Web-UI as the server is listening on the appropriate address.
* Wed May 16 2012 msAATTsuse.de- DB: update schema documentation
* Wed May 16 2012 msAATTsuse.de- added type attribute . This allows to set the size of the eventual boot partition. If no such size is set 150MB is the minimum size for the boot partition. The value has an effect for image types which creates a boot partition only, e.g LVM, split
* Wed May 16 2012 msAATTsuse.de- changed disk increasement stepsize from 100MB to 10MB
* Wed May 16 2012 rjschweiAATTsuse.de- fix type in comment
* Wed May 16 2012 msAATTsuse.de- cleanup of KIWIBoot constructor, avoid code duplication- added error check for kiwi --bootvm ... --bootvm-system if the system is not a root tree, rootfs image or partition device- prevent dumping the image from a --targetdevice if also the creation of an install media was set. This will speedup the build- make sure to use qemu-img convert to dump image from a targetdevice
* Wed May 16 2012 rjschweiAATTsuse.de- update the OpenNebula example:
* Adjustments for OpenNebula version 3.4.1 release
* Minor script fixes
* Tue May 15 2012 msAATTsuse.de- don\'t use cat when reading data from a disk block device use qemu-img convert instead which takes care for sparse information
* Mon May 14 2012 msAATTsuse.de- fixed getSector() calculation, could be too small aligned
* Mon May 14 2012 msAATTsuse.de- added support for the vhd subformat=fixed type
* Sat May 12 2012 msAATTsuse.de- added LVM volume information for all specified volumes to the profile env of the boot image. This is required to cleanly solve (bnc #761993)
* Fri May 11 2012 msAATTsuse.de- allow option --recycle-root to be used in a --build process If there is a root tree in /build/image-root available it will be used as system image tree. The build of the boot image is not affected by this root recycling
* Fri May 11 2012 msAATTsuse.de- additionally create md5 sum\'s for the kernel and the optional created splash initrd (fate #313338)
* Fri May 11 2012 msAATTsuse.de- changed setupNetwork
* functions in a way that they check for the presence of the $root device and in case of an error and an existing root device LOCAL_BOOT is set and the system try to proceed with local boot of the installed system (fate #313338)
* Fri May 11 2012 msAATTsuse.de- v5.03.5 released
* Wed May 09 2012 msAATTsuse.de- fixed bootloader setup if yaboot is used. the boot partition id is set to fat (0xc) and we have to make sure to provide bootinfo.txt, yaboot.cnf and the yaboot binary at the root of the boot partition. We don\'t distinguish the layout between LVM and non LVM setup if yaboot is used in order to have a clean state
* Wed May 09 2012 msAATTsuse.de- changed function names installBootLoaderLilo and setupBootLoaderLilo to installBootLoaderYaboot and setupBootLoaderYaboot. lilo is only supported together with yaboot on ppc at the moment. So the function names are misleading and would block us if we want to add support for real lilo.
* Wed May 09 2012 msAATTsuse.de- fixed package check for package scripts. The rpm database from the image root system has to be used instead of the build system package database
* Tue May 08 2012 msAATTsuse.de- Revert \"- don\'t set vga= kernel parameter for lilo bootlader setup\" This reverts commit 5e815b28c84e805d4777551d67be8da0433e1238. lilo on ppc is something complete different than lilo on other architectures. The vga value is supported well on \'real\' lilo so this issue should be fixed in the bootloader
* Mon May 07 2012 msAATTsuse.de- don\'t set vga= kernel parameter for lilo bootlader setup I was told this causes trouble when lilo.conf is converted to yaboot.conf
* Mon May 07 2012 msAATTsuse.de- use correct size for FAT table when yaboot is used
* Mon May 07 2012 msAATTsuse.de- we don\'t need the mbrid information for ppc/yaboot the searchOFBootDevice function doesn\'t request it
* Mon May 07 2012 msAATTsuse.de- respect custom boot timeout value for yaboot setup
* Fri May 04 2012 msAATTsuse.de- don\'t remove cpio program from initrd, required for custom splash setup follow up fix for the other architectures s390, ppc and arm
* Fri May 04 2012 msAATTsuse.de- allow evaluation of $DO_NOT_INSTALL_BOOTLOADER variable in netboot suse-preinit to prevent installation of the bootloader by a variable (bnc #760502)
* Fri May 04 2012 msAATTsuse.de- netboot: use --metadata=0.9 format for raid setup (bnc #760713)
* Fri May 04 2012 msAATTsuse.de- v5.03.4 released
* Fri May 04 2012 msAATTsuse.de- fixed URL repo check, correctly use is_success method and make sure every repo is checked for rpm-md _and_ repodata
* Fri May 04 2012 msAATTsuse.de- removed \'in progress\' indicators from messages containing a path People reported to be confused about the path to be complete :)
* Fri May 04 2012 msAATTsuse.de- create rootfs.meta data file which includes information about the required min size and (good) inode value for split systems. This prevents the initrd code from getting that information out of the rootfs.tar tarball and thus speeds up the boot
* Thu May 03 2012 msAATTsuse.de- fixed unit test due to the removal of the aufs support
* Thu May 03 2012 msAATTsuse.de- remove the urlResponse() method and use the timeout function implemented in LWP::UserAgent properly to resolve URL\'s
* Thu May 03 2012 msAATTsuse.de- make sure releaseNetwork() also deconfigures the interface and configuration. Meaning don\'t use the -p option as we already check for root over NFS/AOE/NBD it doesn\'t make sense anymore- make sure releaseNetwork() unsets the HOSTNAME as it might conflict with the later system image network setup
* Thu May 03 2012 msAATTsuse.de- allow kiwisplitroot_size= which specifies how much size is reserved for the tmpfs holding the temporary rootfs data in a split image. Also fixed the calculation of the inode number for this tmpfs
* Thu May 03 2012 msAATTsuse.de- removed support for aufs overlay filesystem. The problem is that no overlay filesystem like aufs, unionfs, deltafs and friends is accepted by the kernel people. Thus support for them inside the distribution(s) is hard to maintain and the system barely works. My hope is that some day there will be the mount --overlay method implemented in a clean way and supported by the kernel until then we live with the fuse based approach (clicfs) and the device mapper snapshot method for the caching system (bnc #760159)
* Thu May 03 2012 rjschweiAATTsuse.de- unit tests for preference settings
* Thu May 03 2012 rjschweiAATTsuse.de- check only for presence and boolean value The \"additive\" attribute is a boolean value, i.e. valid values are true or false. We should only check for supported values. The removed check for 0 is possibly an artifact from times where we alloed 0 to indicate false in the XML.
* Thu May 03 2012 msAATTsuse.de- fixed hook call with parameters containing spaces (bnc #760331)
* Wed May 02 2012 msAATTsuse.de- fixed redundancy in getElementsByTagName (\"...\") -> get_nodelist(); calls. According to the spec getElementsByTagName already returns the node list if called in array context.
* Wed May 02 2012 msAATTsuse.de- added unit test for XML split settings
* Wed May 02 2012 msAATTsuse.de- fixed naming inconsistency: getSplitTmpExceptions/getSplitTempExceptions
* Tue May 01 2012 msAATTsuse.de- v5.03.3 released
* Tue May 01 2012 msAATTsuse.de- fixed baseStripUnusedLibs() to be more robust and prepared for the move of libraries to another location
* Tue May 01 2012 msAATTsuse.de- don\'t remove cpio program from initrd, required for custom splash setup
* Tue May 01 2012 msAATTsuse.de- v5.03.2 released
* Fri Apr 27 2012 msAATTsuse.de- added optional attribute which allows to configure if the Failsafe boot menu entry for the install media should be displayed or not.
* Fri Apr 27 2012 msAATTsuse.de- removed misleading Restore wording in install iso boot menu
* Fri Apr 27 2012 msAATTsuse.de- make sure required libs for filesystem tools stay inside the initrd
* Thu Apr 26 2012 msAATTsuse.de- v5.03.01 relased
* Thu Apr 26 2012 msAATTsuse.de- make sure libext2fs stays inside the initrd, it\'s required for tune2fs on Factory/openSUSE 12.2
* Thu Apr 26 2012 msAATTsuse.de- fixed evaluation of --edit-bootconfig. There is either the choice for setting the value on the commandline or as attribute inside the XML description. Before this fix the code did not correctly get the value depending on how kiwi is called- make sure any iso is created via the KIWIISOLinux provided functions. According to this editbootconfig now also works for the creation of installs ISO\'s
* Thu Apr 26 2012 rjschweiAATTsuse.de- unit tests for the getPXEDeploy
* methods
* Thu Apr 26 2012 rjschweiAATTsuse.de- fix typo in XML OEM settings unit test configuration
* Thu Apr 26 2012 rjschweiAATTsuse.de- fix typo in explanatory comment
* Wed Apr 25 2012 msAATTsuse.de- make sure grub menu.lst is correctly utf-8 encoded
* Wed Apr 25 2012 msAATTsuse.de- added __hasValidLVMName() runtime check. This checks if the optional LVM group name already exist on the build host.
* Wed Apr 25 2012 msAATTsuse.de- fixed typo in error message, $! is empty but we stored the messages in $status
* Tue Apr 24 2012 msAATTsuse.de- fixed flag state for iso in extras/suse-11.4/suse-min-gnome
* Tue Apr 24 2012 msAATTsuse.de- redirect errors from rpm --rebuilddb into the result variable
* Mon Apr 23 2012 msAATTsuse.de- v5.02.25 released
* Sun Apr 22 2012 msAATTsuse.de- fixed loop in partition size check
* Sun Apr 22 2012 msAATTsuse.de- added a check for the split read/write partition size when creating the virtual disk.
* Sat Apr 21 2012 rjschweiAATTsuse.de- add unit tests for the getOEM
* methods Prior to undertacing the restructuring of the XML object we need to get unit tests in place
* Fri Apr 20 2012 msAATTsuse.de- v5.02.24 released
* Thu Apr 19 2012 msAATTsuse.de- take package section type into account when processing bootincluded packages. This means packages added as bootincluded into the e.g image section gets added to the image section in the boot image too. If the target description doesn\'t provide the section the package will be added to the default bootstrap section as before
* Thu Apr 19 2012 msAATTsuse.de- remove db4 package from the delete list in the RHEL boot image descriptions
* Thu Apr 19 2012 msAATTsuse.de- fixed rpm package database rebuild check for RHEL/yum this reverts commit: c3e4ac88562074d87cad21e96cfe3d6dde976e48
* Thu Apr 19 2012 msAATTsuse.de- moved yum priority installation from the RHEL boot- into the system image template and make it a bootincluded package. That\'s because there are name differences like yum-priority and yum-plugin-priority
* Thu Apr 19 2012 msAATTsuse.de- fixed rebuild of package database when yum is used
* Wed Apr 18 2012 msAATTsuse.de- arm: adapt JeOS description for beagle and fixed building in emulated environment
* Tue Apr 17 2012 msAATTsuse.de- really fixed boot.script setup according to (bnc #757489)
* Tue Apr 17 2012 msAATTsuse.de- arm: On other systems which supports a boot menu we add the linux kernel and initrd with its file names. But on arm systems there can only be one kernel because uboot doesn\'t support a menu. Thus perl-bootloader also doesn\'t support updating the uboot configuration and that\'s the reason why we use the links created by mkinitrd to point to the kernel and initrd in order to support kernel updates (bnc #757489)
* Mon Apr 16 2012 msAATTsuse.de- s390: fixed recreateVTOCTable() to wait until the volume group has settled before deactivating it in a LVM setup
* Mon Apr 16 2012 msAATTsuse.de- removed obsolete error console information
* Mon Apr 16 2012 msAATTsuse.de- kiwi creates a link with filesystem extension pointing to the root filesystem image when created. The function compressImage creates a .gz version of that root filesystem image and therefore break the link. This fix enhances compressImage() in a way that it receives the filesystem information in order to repair the link
* Mon Apr 16 2012 msAATTsuse.de- added oem type to s390 JeOS image description
* Mon Apr 16 2012 msAATTsuse.de- update s390 SLE repo in JeOS template
* Mon Apr 16 2012 msAATTsuse.de- v5.02.23 released
* Fri Apr 13 2012 msAATTsuse.de- DB: rebuild documentation
* Fri Apr 13 2012 msAATTsuse.de- DB: update documentation
* Fri Apr 13 2012 msAATTsuse.de- added preCallInit hook to be available for the vmx type too
* Fri Apr 13 2012 msAATTsuse.de- fixed partition based oem install method. parsing proc/partitions was broken in OEMFindPartitions because the ID device name was used as reference instead of the unix device name
* Thu Apr 12 2012 rjschweiAATTsuse.de- properly pick up splash image for pre-built initrd. At present it is not possible to use a splash screen with a prebuilt initrd. For a pre-built initrd the splash file is named with extension \'.spl\', but we are loking for the extension \'.splash.gz\', thus the file is not found. With this change we look for the file with the appropriate extension.
* Wed Apr 11 2012 msAATTsuse.de- update list of allowed VMware guestOS values
* Wed Apr 11 2012 winterAATTsuse.de- Fix the handling of the --mbrid command line switch The value passed to the --mbrid flag is parsed to an integer by GetOptions (format is \'o\' = extended integer). There is code checking whether this integer is within the expected range and formats it as hexadecimal value. But commit: a5c7ab512dfb02dd99044c1db1cbc46ab05bf221 introduced a regression in the way the value of the --mbrid flag was handled because the value is set using $cmdL -> setMBRID() before the range checking and conversion.
* Wed Apr 11 2012 rjschweiAATTsuse.de- prepare the code for the move of the udev tools to the usr tree. At present the location of udevadmin is hardcoded to /sbin, once the tools move into the /usr tree and a link exists the \'-x\' test will fail. This would result in broken images.
* Mon Apr 09 2012 rjschweiAATTsuse.de- Do not allow whitespce in the value of the name attribute for the and elements. At present the user can specify a name containing whitespace. This leads to problems that are difficult to diagnose in when the user tries to run the resulting image, as the image will not properly operate.
* Sun Apr 08 2012 rjschweiAATTsuse.de- Fix ownership issue with persistent tmpdir At present the script fails if /var/tmp does not exist. Although /var/tmp should always exist, the new code assures proper handling if this directory is missing.
* Sun Apr 08 2012 rjschweiAATTsuse.de- Fix race condition in launch script for openNebula test At present the test script may cause a condition where the openNebula infrastructure issues a \"[VirtualMachineAllocate] Error allocating a new virtual machine. Could not get disk image for VM.\" message. Giving the system some time to copy the image file eliminates this issue.
* Wed Apr 04 2012 msAATTsuse.de- v5.02.22 released
* Wed Apr 04 2012 msAATTsuse.de- fixed missing filesystem resize operation for LVM based images. If oem-systemsize and a freespace=all volume is setup kiwi resized only the freespace=all volume and missed to resize the root volume
* Tue Apr 03 2012 msAATTsuse.de- fixed XSL stylesheet conversion: convert49to50.xsl the apply templates recursion is broken by using another mode so the fix is to stay in the same mode and select the value by a modified xpath expression
* Mon Apr 02 2012 msAATTsuse.de- fixed misleading error message when kiwi can\'t find the image file on the pxe download server (bnc #754275)
* Mon Apr 02 2012 msAATTsuse.de- fixed oem installation with luks encrypted root filesystem during the repartitioning the luks setup has to close down otherwise the partition table is busy (bnc #754978)
* Mon Apr 02 2012 msAATTsuse.de- fixed test -z expression
* Mon Apr 02 2012 msAATTsuse.de- fixed creation of sat job list, eliminate duplicate jobs
* Mon Apr 02 2012 msAATTsuse.de- make sure solver failed packages/patterns are evaluated in info module
* Sat Mar 31 2012 msAATTsuse.de- make sure libkmod stays in the initrd
* Sat Mar 31 2012 msAATTsuse.de- make sure solver problems are evaluated in info module
* Fri Mar 30 2012 msAATTsuse.de- v5.02.21 released
* Fri Mar 30 2012 msAATTsuse.de- fixed incorrect fstab entry created for read-only systems
* Fri Mar 30 2012 msAATTsuse.de- fixed identifyDevice() to calculate the correct index for accessing an entry in the deviceArray list
* Fri Mar 30 2012 msAATTsuse.de- moved from md5_base64 to md5_hex for the creation of random repo alias names. md5_base64 could create names with a \'/\' and that causes trouble when checking for the existence of the repo file. In order to avoid to implement the same escape code as used by zypper in kiwi for such alias names, I\'d better moved the code to create hex number based alias names
* Thu Mar 29 2012 msAATTsuse.de- make sure ZYPP_LOCKFILE_ROOT is set appropriately when zypper is used with --root option (bnc #753818)
* Wed Mar 28 2012 msAATTsuse.de- fixed updateOtherDeviceFstab() to correctly create missing mount points inside the root file system (bnc #754344)
* Wed Mar 28 2012 msAATTsuse.de- make sure volume group name doesn\'t contain white spaces
* Fri Mar 23 2012 msAATTsuse.de- v5.02.20 released
* Thu Mar 22 2012 msAATTsuse.de- arm: added support for optional ${append} bootargs variable (bnc #752623)
* Tue Mar 20 2012 msAATTsuse.de- make sure loader variable is initialized
* Mon Mar 19 2012 msAATTsuse.de- don\'t use -s option for losetup: the option -s is in collision with the Loop-AES losetup dialect that is used in some distributions. Use the long version (--show) only.
* Mon Mar 19 2012 msAATTsuse.de- changed repartition code for LVM concerning the use of element \'\' and \'freespace=all\' volume:
* if none of the two is specified, the root will be expanded to occupy all available space
* if only oem-systemsize is specified, the root will be expanded as much as specified
* if only freespace=all is specified (for non-root volume), then the root will not be expanded and the other volume will take all available space
* Finally, if both are specified, then the root will be expanded to take as much as oem-systemsize requires and any remaining space is assigned to the other volume.
* Sat Mar 17 2012 msAATTsuse.de- fixed compare of object addresses by using refaddr. This is more robust because objects can overload operators like \'!=\'
* Sat Mar 17 2012 msAATTsuse.de- fixed pattern names used in examples (bnc #752754)
* Fri Mar 16 2012 msAATTsuse.de- v5.02.19 released
* Fri Mar 16 2012 msAATTsuse.de- fixed order of files in an ova tar archive per spec in http://www.vmware.com/pdf/ovf_spec_draft.pdf (bnc #752581)
* Fri Mar 16 2012 msAATTsuse.de- fixed malformed ovf file. the Envelope properties xmlns:rasd and xmlns:vssd are split in two lines with an extra quote (\") (bnc #752580)
* Fri Mar 16 2012 rjschweiAATTsuse.de- only remove the KIWI created initrd and kernel if mkinitrd run was successful- remove unused variable haveVMX
* Thu Mar 15 2012 msAATTsuse.de- make split building more robust. the read-only partition size will be a bit bigger than the actual read-only filesystem image to be sure it fits into the partition. Due to the alignment this was required and costs a few bytes
* Thu Mar 15 2012 msAATTsuse.de- make sure kernelCheck() initializes list of kernels if empty (bnc #752259)
* Wed Mar 14 2012 msAATTsuse.de- don\'t remove libbz2 from isoboot boot images for SLE11
* Wed Mar 14 2012 msAATTsuse.de- fixed removePackages() function
* make sure rpmLibs() is called prior to rpm. if all packages are installed by bootstrap only this is required
* make sure to check for empty $final variable
* Wed Mar 14 2012 msAATTsuse.de- added ovf format example to examples/suse-12.1/suse-vm-guest
* Wed Mar 14 2012 msAATTsuse.de- better warning message about required machine section data
* Tue Mar 13 2012 rjschweiAATTsuse.de- run the unit tests in verbose mode during package build
* Mon Mar 12 2012 rjschweiAATTsuse.de- fix Validator test Revert f551128061 and d76e57194c, comparison in question checks for equality of objects, thus numerical comparison is appropriate
* Fri Mar 09 2012 msAATTsuse.de- v5.02.18 released
* Fri Mar 09 2012 msAATTsuse.de- fixed entry for hv_netvsc.ko driver
* Thu Mar 08 2012 msAATTsuse.de- fixed rpm database consistency check
* Thu Mar 08 2012 msAATTsuse.de- use string comparison operator for strings and not numeric op
* Thu Mar 08 2012 msAATTsuse.de- add new kernel module paths for Microsoft HyperV (hv) modules
* Tue Mar 06 2012 msAATTsuse.de- fixed use of != operator in KIWIXMLValidator
* Tue Mar 06 2012 msAATTsuse.de- removed the rpmLibs() tricks, all that sucks
* Tue Mar 06 2012 msAATTsuse.de- fixed typo in KIWICollect.pm
* Tue Mar 06 2012 msAATTsuse.de- added which based search for dracut/mkinitrd/depmod
* Tue Mar 06 2012 rjschweiAATTsuse.de- remove unused function callSUSEInitrdScripts The initrd is created by setupRHELInitrd and setupSUSEInitrd, there is no call in the code to callSUSEInitrdScripts
* Mon Mar 05 2012 msAATTsuse.de- fixed removePackages():
* use options --noscripts --allmatches
* respect return code from rpm call
* make sure proc is mounted
* Mon Mar 05 2012 rjschweiAATTsuse.de- added function updateModuleDependencies() to update the kernel modules dependency list. Call this function prior to creating the initrd. This allows the user to add custom kernel modules and makes sure these get picked up when mkinitrd runs
* Mon Mar 05 2012 msAATTsuse.de- make removePackages() to work with yum
* Mon Mar 05 2012 msAATTsuse.de- allow fixup of image min size if given size is too small- fixed partition size check
* Mon Mar 05 2012 msAATTsuse.de- fixed logging of non CR terminated lines when in --logfile mode
* Mon Mar 05 2012 msAATTsuse.de- v5.02.17 released
* Mon Mar 05 2012 msAATTsuse.de- follow up fix for handling of console in kiwi initrd (bnc #749900)
* don\'t start blogd in kiwi initrd, doesn\'t make much sense
* fixed console output, stdout was wrongly redirected
* make sure utimer also works in the preinit code
* Mon Mar 05 2012 msAATTsuse.de- v5.02.16 released
* Mon Mar 05 2012 msAATTsuse.de- arm: fixed installation of MLO loader, wrong path
* Sun Mar 04 2012 msAATTsuse.de- arm: added following boot fixes:
* To avoid any issues when parted leaves x86 boot code we zero out the first 440 bytes (MBR without ptable). The mandatory master boot id to identify the device is written afterwards
* make sure MLO is installed after repart again in installBootLoaderUBoot. Also make sure the same MBR cleanup code is applied in the kiwi boot code
* Fri Mar 02 2012 msAATTsuse.de- v5.02.15 released
* Fri Mar 02 2012 msAATTsuse.de- fixed handling of console in kiwi initrd (bnc #749900)
* removed use of klogconsole, we want kernel messages at that stage
* don\'t use tty devices, use /dev/console and remove kiwistderr
* allow debug shell only if tty device for it exists
* don\'t use extra terminal to show error information. all that is stored in /var/log/boot kiwi
* Fri Mar 02 2012 msAATTsuse.de- added ec2region setup to ec2 example image descriptions
* Fri Mar 02 2012 msAATTsuse.de- DB: rebuild documentation
* Thu Mar 01 2012 msAATTsuse.de- fixed default fstab setup to know about /run for udev
* Thu Mar 01 2012 rjschweiAATTsuse.de- update EC2 chapter Include information about EC2 tools handling of regions, us-east-1 is the default if not otherwise specified via EC2_URL, --url, or --region
* Thu Mar 01 2012 msAATTsuse.de- fixed initrd module list for ec2 format code
* Wed Feb 29 2012 msAATTsuse.de- further cleanup of ec2 examples
* Wed Feb 29 2012 msAATTsuse.de- cleanup ec2 examples
* Tue Feb 28 2012 msAATTsuse.de- netboot: fixed setup of root device for local boot
* Tue Feb 28 2012 msAATTsuse.de- added -base kernel packages for ec2 and xenk boot profiles
* Tue Feb 28 2012 msAATTsuse.de- fixed mkinitrd call in ec2 format code:
* don\'t use -A also make sure the exit code of mkinitrd is evaluated
* make sure all required filesystem modules are added to /etc/sysconfig/kernel before calling mkinitrd
* Tue Feb 28 2012 msAATTsuse.de- respect size setup by user and don\'t add extra space for a possible boot partition
* Mon Feb 27 2012 msAATTsuse.de- because the input stream from XML is utf-8 encoded it\'s required to set binmode correctly to utf-8 too when writing the data out. This is at least required for the profile file inside the initrd because it contains data from the XML like the oem boot title
* Sun Feb 26 2012 msAATTsuse.de- changed partition alignment to align start and size of partitions to 4096 bytes. The value can be changed with the option --disk-alignment
* Fri Feb 24 2012 msAATTsuse.de- v5.02.14 released
* Fri Feb 24 2012 msAATTsuse.de- added support for grub2 based install iso images
* Thu Feb 23 2012 msAATTsuse.de- v5.02.13 released
* Thu Feb 23 2012 msAATTsuse.de- follow up and improved fix for basePackBootIncludes to pack only items listed in the rpm package filelist but don\'t recursively look them up in the filesystem when tar\'ing them up (bnc #743159)
* Thu Feb 23 2012 msAATTsuse.de- added creation of new meta file appdata.xml for product media
* Thu Feb 23 2012 msAATTsuse.de- don\'t remove opt and selinux from initrd
* Wed Feb 22 2012 msAATTsuse.de- added possibility to specify an oem-unattended-id in the oemconfig section. The id is evaluated as part of the oem install code and can be either the string like it appears in dev/disk/by-id or by-path. if the option oem-unattended is set to true kiwi will try to assign the install device according to the specified id. if the id cannot be found a reboot exception is thrown. If no id is specified but unattended mode is requested the first entry of the sorted device list will be used like before this change
* Wed Feb 22 2012 msAATTsuse.de- sort list of devices found for installation in suse-dump
* Tue Feb 21 2012 msAATTsuse.de- remove \'fixed\' flagged repositories from boot image descriptions. As the boot image inherit the repo setup from the system image it\'s more flexible to let the system image decide for the repos
* Tue Feb 21 2012 msAATTsuse.de- fixed suseStripModules to return early if no update driver was found
* Tue Feb 21 2012 msAATTsuse.de- added staging/hv drivers to SLE11 boot image descriptions. Beginning with SLE11-SP2 the drivers are part of the standard kernel and thus they should be preserved (bnc #747898)- with reference to (bnc #747898) a new function called suseStripModules() has been added. The function searches for update modules and removes the old version which might be provided by the standard kernel to prevent a load clash
* Tue Feb 21 2012 rjschweiAATTsuse.de- fix improper call off stripImage()- fix some cosmetic issues
* Mon Feb 20 2012 msAATTsuse.de- v5.02.12 released
* Mon Feb 20 2012 msAATTsuse.de- fixed resetBootBind, the function did not properly check for the existence of the boot_bind directory
* Fri Feb 17 2012 msAATTsuse.de- v5.02.11 released
* Fri Feb 17 2012 msAATTsuse.de- deactivate volume groups always with their name as argument- fixed setDefaultDeviceMap to respect device naming conventions
* Fri Feb 17 2012 msAATTsuse.de- finally fixed setupBootPartition in a clean way. kiwi creates a volume label named \'BOOT\' if a boot partition is used. setupBootPartition searches for the label and setup the boot partition accordingly. Along with the change the functions update
*BootDeviceFstab and resetBootBind were also adapted. There is now only one updateBootDeviceFstab handling the boot partition entry for all modes if required
* Thu Feb 16 2012 msAATTsuse.de- v5.02.10 released
* Thu Feb 16 2012 msAATTsuse.de- added virtio drivers for sle10 boot image descriptions (bnc #747346)
* Thu Feb 16 2012 msAATTsuse.de- arm: make boot.script more robust by checking alternative variable names for kernel and initrd addresses
* Thu Feb 16 2012 msAATTsuse.de- fixed checkLVMbind so that it directly reads the LVM header from the specified disk device
* Thu Feb 16 2012 msAATTsuse.de- arm: fixed installation of MLO loader, wrong path
* Thu Feb 16 2012 msAATTsuse.de- call resetBootBind before preinit (bnc #747241)
* Wed Feb 15 2012 msAATTsuse.de- removed use of suseRemovePackagesMarkedForDeletion
* Wed Feb 15 2012 msAATTsuse.de- arm: renamed image descriptions to \'Factory\'- arm: removed use of suseRemovePackagesMarkedForDeletion
* Wed Feb 15 2012 msAATTsuse.de- arm: added vram setup to JeOS description- arm: fixed boot.script setup on first boot
* Wed Feb 15 2012 msAATTsuse.de- DB: update documentation, added chapter about image caching
* Wed Feb 15 2012 msAATTsuse.de- arm: added mmc sd card drivers to boot image descriptions
* Wed Feb 15 2012 msAATTsuse.de- don\'t call images.sh and config.sh when in --init-cache mode- don\'t evaluate packages type=\"delete\" section in --init-cache mode- added check for rpm binary in cleanupRPMDatabase
* Tue Feb 14 2012 msAATTsuse.de- arm: make creation of boot.script more generic by using kerneladdr and ramdiskaddr variables- arm: fixed JeOS console setup for efika, setup baudrate
* Tue Feb 14 2012 msAATTsuse.de- added newline for messages waiting for status flag when they are written to the kiwi log file. It hurts when multiple log messages are written without a newline
* Mon Feb 13 2012 msAATTsuse.de- arm: fixed setup of boot.script, missing redirect
* Fri Feb 10 2012 msAATTsuse.de- v5.02.9 released
* Fri Feb 10 2012 msAATTsuse.de- added support for iso boot process from external loader If the boot option isofrom=\"storage-device:path/to/iso\" is given the isoboot initrd will try to use the contents of this device to boot up the system. This allows to externally load the linux kernel and initrd with e.g grub2\'s loopback support and let the iso image exist as a file instead of being dumped on a target device Details on the use case can be found in (bnc #746351)
* Thu Feb 09 2012 rjschweiAATTsuse.de- remove superfluous boot.local
* Thu Feb 09 2012 msAATTsuse.de- store mbrid for iso images as Application ID and not as Volume ID
* Wed Feb 08 2012 msAATTsuse.de- fixed importFile function to export only prefixed version of the variable if there is a prefix and not both (bnc #732247)
* Wed Feb 08 2012 msAATTsuse.de- fixed import of dhcp info file (bnc #745548)
* Wed Feb 08 2012 msAATTsuse.de- migration changes:
* apply deny files on packaged dir list to speedup File::Find
* added patternType plusRecommended
* added comment about package prefer problem
* added path resolver function
* Wed Feb 08 2012 msAATTsuse.de- migration: fixed service setup, use chkconfig
* Tue Feb 07 2012 msAATTsuse.de- migration: fixed oemboot prefix setup
* Mon Feb 06 2012 msAATTsuse.de- arm: Now that x-loader on OMAP can boot from ext2, let\'s also teach kiwi about that awesome new capability. This gets rid of the vfat based boot partition and moves it to an ext2 based one. Additionally the 64MB limit on the boot partition is gone because the MLO is installed in the first 128kb of the disk and is no longer part of the boot partition. Kudos to Alexander Graf you added all this.
* Mon Feb 06 2012 msAATTsuse.de- s390: fixed bootdevice setup for zipl
* Mon Feb 06 2012 msAATTsuse.de- added rootfs check to ec2 format code
* Sat Feb 04 2012 msAATTsuse.de- clean up delete lists for 12.1 boot image descriptions
* Sat Feb 04 2012 msAATTsuse.de- run xml validation on source tree
* Fri Feb 03 2012 rjschweiAATTsuse.de- clean up to perlcritic level 5
* Fri Feb 03 2012 msAATTsuse.de- fixed typo in flavour name: efikaFlavour
* Fri Feb 03 2012 msAATTsuse.de- fixed setup of LOADER_TYPE for /etc/sysconfig/bootloader in setupBootLoaderLilo(). Depending on the architecture this value is different
* Fri Feb 03 2012 msAATTsuse.de- v5.02.8 released
* Fri Feb 03 2012 msAATTsuse.de- moved validation of delete section into setup() routine- dont\'t use basePackBootIncludes/baseUnpackBootIncludes anymore this conflicts with bootincluded packages marked for deletion
* Thu Feb 02 2012 msAATTsuse.de- keep only the uBoot initrd representation and remove the gzip version of the initrd from the boot partition. This saves some space urgently needed because on arm the boot partition is fixed 64MB
* Thu Feb 02 2012 rjschweiAATTsuse.de- add unit test for getExecArgsFormat() method of KIWILocator- implement helper executables for the test in new bin directory- fix logic errors in getExecArgsFormat() found by unit test implementation
* Wed Feb 01 2012 msAATTsuse.de- migration: fixed repo dir detection
* Wed Feb 01 2012 msAATTsuse.de- migration: sort repo list information
* Wed Feb 01 2012 msAATTsuse.de- migration: write cache early enough
* Wed Feb 01 2012 msAATTsuse.de- migration: added support for svn detection
* Wed Feb 01 2012 msAATTsuse.de- fixed use of uninitialized value in the locator
* Wed Feb 01 2012 msAATTsuse.de- migration changes:
* added progress information while creating custom tree
* make custom files creation much faster
* make modified files creation faster
* Mon Jan 30 2012 msAATTsuse.de- allow use of merged solvable in KIWISatSolver
* Mon Jan 30 2012 msAATTsuse.de- migration: ignore weak-update links
* Mon Jan 30 2012 msAATTsuse.de- migration changes:
* create custom tree for unpackaged files/dirs based on hardlinks
* don\'t copy entire etc/ directory, doesn\'t make sense to have all especially packages stuff in the overlay tree
* adapt deny list, ignore bootsplash and bootloader data for migration
* Fri Jan 27 2012 rjschweiAATTsuse.de- fix spec file, version of RPM on SLE does not handle %else if directives thus we get a dependency to qemu-img is created, but this package does not exist on SLE.
* Fri Jan 27 2012 msAATTsuse.de- v5.02.7 released
* Fri Jan 27 2012 msAATTsuse.de- clean KIWICollect.pm to perl critic
* Fri Jan 27 2012 msAATTsuse.de- In RHEL/CentOS distributions the qemu-img program is packaged in qemu-img not in qemu or virt-utils.
* Fri Jan 27 2012 msAATTsuse.de- enhanced RHEL6 JeOS
* added default ifcfg-eth0 connecting via dhcp
* switch off firstboot start via sysconfig/firstboot
* added profiles RedHat and CentOS to build for both targets
* Thu Jan 26 2012 msAATTsuse.de- v5.02.6 released
* Thu Jan 26 2012 msAATTsuse.de- fixed setupKernelModules and init call for CentOS
* Wed Jan 25 2012 rjschweiAATTsuse.de- implement method to allow us to handle different command line argument implementations, i.e. -longOpt vs --longOpt. This problem is currently experienced on different versions of the isohybrid executable- use newly implemented method to properly determine the argument format when calling the isohybrid executable. Really fixes (bnc #742836)
* Wed Jan 25 2012 msAATTsuse.de- fixed error console setup in arm JeOS description
* Tue Jan 24 2012 msAATTsuse.de- v5.02.5 released
* Tue Jan 24 2012 msAATTsuse.de- really fixed basePackBootIncludes to pack only files and don\'t break if packages includes symbolic links (bnc #743159)
* Tue Jan 24 2012 msAATTsuse.de- added support for oem image type for the arm architecture
* Tue Jan 24 2012 msAATTsuse.de- fixed call of isohybrid, there is no -o option but -offset
* Tue Jan 24 2012 msAATTsuse.de- clean ProductData, RepoMetaHandler, and Root modules to perl critic
* Tue Jan 24 2012 msAATTsuse.de- eliminate previously removed SatSolverLegacy file from check lists in the pre-commit hook
* Mon Jan 23 2012 msAATTsuse.de- v5.02.4 released
* Mon Jan 23 2012 msAATTsuse.de- check if fbiterm binary really exists and don\'t assume it\'s there just because a framebuffer device exists. Also cleanup the Dialog function to work without a framebuffer
* Mon Jan 23 2012 rjschweiAATTsuse.de- ignore additional files (emacs backup, localization, temporaries)
* Mon Jan 23 2012 msAATTsuse.de- fixed setup of root partition for LVM images
* Mon Jan 23 2012 msAATTsuse.de- fixed repo and config setup for RHEL6 JeOS
* Mon Jan 23 2012 rjschweiAATTsuse.de- create hybrid ISOs at offset 64. This fixes (bnc #742836)
* Fri Jan 20 2012 msAATTsuse.de- migration changes:
* add support for local repo (git) checkout detection
* search for unpacked symlinks whose origin is packaged
* Fri Jan 20 2012 msAATTsuse.de- migration: added support for gem inspection
* Thu Jan 19 2012 msAATTsuse.de- make media check more user friendly. check if checkmedia returns successfully and print a message. After that wait for keypress and don\'t reboot (bnc #728384)
* Thu Jan 19 2012 msAATTsuse.de- migration: fixed creation of unpackaged files information
* Thu Jan 19 2012 msAATTsuse.de- fixed basePackBootIncludes to pack only files from boot included rpm packages but not entire directories
* Wed Jan 18 2012 msAATTsuse.de- make sure rhel oemboot descriptions are packaged
* Wed Jan 18 2012 msAATTsuse.de- fixed RHEL6 JeOS used group names
* Wed Jan 18 2012 msAATTsuse.de- removed staging/hv drivers from SLE11, they conflict with the kmp package provided on SLE11
* Wed Jan 18 2012 msAATTsuse.de- fixed error handling in XML info module when sources can\'t be found
* Tue Jan 17 2012 msAATTsuse.de- DB: update schema documentation
* Tue Jan 17 2012 msAATTsuse.de- added type attribute devicepersistency which allows to set by-uuid, by-label or by-path device names. by default by-id device names are used
* Tue Jan 17 2012 msAATTsuse.de- update rhel support:
* incorporate non suse specific kiwi patches to rhel boot code
* added rhel6 support for vmx image type
* added rhel6 support for oem image type
* added rhel6 JeOS image template
* Mon Jan 16 2012 msAATTsuse.de- fixed root device name setup due to changed partition layout
* Mon Jan 16 2012 msAATTsuse.de- changed the way how kiwi detects live and install ISO media. The volume ID of a live and install iso is now a unique ID. On boot the devices are searched to match that ID
* Sun Jan 15 2012 msAATTsuse.de- follow up fix for last commit. Moved the calculation of the seek value into the getBlocks function and also fixed the function in terms of non reachable code
* Sat Jan 14 2012 rjschweiAATTsuse.de- fix \"off by 1\" error The created image is either 1M or 8K larger than the created partition for images that require a boot partition (XFS or Btrfs filesystems). This triggers a failure when the image is dumped to the partition in the disk image. See mailinglist thread http://groups.google.com/group/kiwi-images/browse_thread/thread/8988598856aee92d
* Fri Jan 13 2012 msAATTsuse.de- added support for setupBootLoaderGrub2 and installBootLoaderGrub2 in kiwi\'s initrd code. The functions are called on first deployment of the image and create the system bootloader configuration via grub2-mkconfig and grub2-install
* Fri Jan 13 2012 msAATTsuse.de- make sure default strip type=\"delete\" information from KIWIConfig.txt is used even if a custom strip section was defined
* Fri Jan 13 2012 msAATTsuse.de- deactivate the use of basePackBootIncludes/baseUnpackBootIncludes These functions can be used to preserve and restore the contents of bootincluded packages/archives. We used it to prevent removal of files by the suseStripInitrd function. Due to the change of suseStripInitrd we are now more flexible to control what stays in- and what should be removed from the initrd which makes the use of basePackBootIncludes/baseUnpackBootIncludes obsolete
* Thu Jan 12 2012 msAATTsuse.de- v5.02.3 released
* Thu Jan 12 2012 msAATTsuse.de- find a way to install grub2 into a partition :)
* Wed Jan 11 2012 msAATTsuse.de- first start of supporting grub2 in kiwi, still missing parts are:
* graphics boot setup, no font or theme is provided by SUSE
* first boot setup, it\'s not clear if we use grub2-mkconfig or if kiwi has to write the configuration by itself
* recovery grub2 setup, this normally means install grub into a partition. So far I wasn\'t able to install grub2 at another place than the MBR
* Wed Jan 11 2012 msAATTsuse.de- increased wait timeout for CDDevice search
* Tue Jan 10 2012 msAATTsuse.de- added staging/hv drivers to 12.1 and SLE11 boot images
* Tue Jan 10 2012 msAATTsuse.de- allow by-uuid device persistency via the kernel commandline option USE_BY_UUID_DEVICE_NAMES=1
* Tue Jan 10 2012 msAATTsuse.de- removing references to online repos from the sle boot images (bnc #734887)
* Virtualization:/Appliances:/suse-sle11
* Virtualization:/Appliances:/suse-sle10
* Tue Jan 10 2012 msAATTsuse.de- clean up spec file, don\'t require perl-satsolver but recommend it
* Tue Jan 10 2012 msAATTsuse.de- removed obsolete repo reference from KIWISatSolver module- removed obsolete KIWISatSolverLegacy module and satplugin
* Tue Jan 10 2012 msAATTsuse.de- added additional data to the XML info module:
* repository url per package to the packages info
* adaption of the legacy kiwi SaT binding
* Mon Jan 09 2012 msAATTsuse.de- added additional data to the XML info module:
* checksum and checksum type information to packages info
* priority, username and password information to sources info
* Mon Jan 09 2012 rjschweiAATTsuse.de- alphasort the driver and package entries in the boot descriptions This aids comparison between base distributions and boot types. It also helps in avoiding duplicate entries if changes need to be made (see mistake in a recent commit)
* Mon Jan 09 2012 msAATTsuse.de- update SLE10/11 JeOS README
* Mon Jan 09 2012 msAATTsuse.de- fixed missing btrfs driver entries
* Mon Jan 09 2012 msAATTsuse.de- fixed typo: s/btrfsprogrs/btrfsprogs
* Sun Jan 08 2012 msAATTsuse.de- netboot: added a check for the boot partition in a LUKS setup. if root is LUKS encrypted the local boot setup only works with a proper boot partition. If such a partition is not found the local boot setup will be skipped (bnc #735112)
* Sun Jan 08 2012 msAATTsuse.de- make setup of boot device and updateOtherDeviceFstab more robust. This is related to bug (bnc #735112)
* Sun Jan 08 2012 msAATTsuse.de- fixed typo, doubled driver entry
* Sat Jan 07 2012 msAATTsuse.de- v5.02.2 released
* Sat Jan 07 2012 msAATTsuse.de- make sure xfs_growfs and xfs_check stay in the initrd (bnc #740073)
* Sat Jan 07 2012 msAATTsuse.de- fixed rebuild of rpm database (bnc #740033)
* Sat Jan 07 2012 msAATTsuse.de- fixed possible use of uninitialized value in string comparison
* Sat Jan 07 2012 msAATTsuse.de- fixed indention spaces vs. tabs at some code points
* Fri Jan 06 2012 rjschweiAATTsuse.de- Properly support image builds for SLE with xfs and btrfs filesystem The initrd image descriptions previously did not include necessary drivers and packages (bnc #740073)
* Fri Jan 06 2012 msAATTsuse.de- v5.02.1 released
* Fri Jan 06 2012 msAATTsuse.de- fixed typo when calling createPartitionerInput
* Fri Jan 06 2012 msAATTsuse.de- fixed __checkTypeConfigConsist to allow valid combinations
* Thu Jan 05 2012 rjschweiAATTsuse.de- add new XML consistency check to verify that type configuration settings are compatible with the specified image type to be built.- update unit test module for validator and implement test cases
* Wed Jan 04 2012 rjschweiAATTsuse.de- fix gpg signature import The failure is triggered by a behavior changes of /usr/lib/rpm/gnupg/dumpsigs on openSUSE 12.1. The updated implementation must be called with a comand line argument, i.e. the gpg file. Previous implementations (checked openSUSE 11.4 and SLES 11 SP1) of dumpsigs also accept this commandline argument, thus the change is backward compatible.
* Wed Jan 04 2012 msAATTsuse.de- adapt oem boot/repart code to changed partition layout
* Tue Jan 03 2012 msAATTsuse.de- adapt vmx boot code to changed partition layout
* Tue Jan 03 2012 msAATTsuse.de- changed partition layout to setup the boot partition as first partition in any case not only for LVM
* Mon Jan 02 2012 msAATTsuse.de- make sure a new master boot id is written on bootloader install
* Sun Jan 01 2012 rjschweiAATTsuse.de- clean Log, Manager, and Migrate modules to critic level5
* Fri Dec 23 2011 msAATTsuse.de- cleanup partition code in KIWIBoot.pm
* Thu Dec 22 2011 msAATTsuse.de- arm: add fixed mac address for panda board which doesn\'t have an eeprom
* Thu Dec 22 2011 msAATTsuse.de- arm: fixed creation of boot.script in setupBootLoaderUBoot- arm: fixed kernelList() function to work with arm uImages
* Thu Dec 22 2011 msAATTsuse.de- added securetty overlay file for arm to allow login on serial console ttyO2
* Wed Dec 21 2011 msAATTsuse.de- added SnapshotChunk and SnapshotCount to global space
* Wed Dec 21 2011 msAATTsuse.de- fixed creation of filelist for cache selection- fixed creation of cache meta data
* Tue Dec 20 2011 msAATTsuse.de- run pretty printer on XML description to create a clean state
* Tue Dec 20 2011 msAATTsuse.de- arm: kiwi-tools is required in the initrd. as it builds now we can safely add it to the vmxboot description
* Tue Dec 20 2011 msAATTsuse.de- arm: if everything is installed in bootstrap, zypper needs to be added as an explicit package
* Tue Dec 20 2011 msAATTsuse.de- arm: better JeOS description. added less and systemd-sysvinit also added a pandaFlavour profile which is imported by default and includes the kernel-omap2plus plus u-boot-omap4panda useful for panda boards. That way we can easily extend the image description to be suitable for other boards
* Tue Dec 20 2011 msAATTsuse.de- fixed spec file for arm build, make sure kiwi-templates has the correct arm JeOS template and also exclude templates from main kiwi package correctly
* Mon Dec 19 2011 msAATTsuse.de- arm: better name for the kernel profile on panda boards: omap4panda- arm: added internal helper repo to the JeOS template as comment
* Mon Dec 19 2011 msAATTsuse.de- added support for arm based images with kiwi
* added vmxboot image description for armv7l
* added kernel profiles: tegra (tegra boards), omap2plus (panda boards), omap3beagle (beagle boards) and imx51 (efika boards). Tested only on panda and there are still plenty of problems. Don\'t expect this support to be ready and stable !
* added JeOS example image for arm, target SLE12
* added support for uboot loader
* Sun Dec 18 2011 msAATTsuse.de- stay compatible with fdisk when using the CHS (cylinder,head,sector) values
* Fri Dec 16 2011 msAATTsuse.de- make sure the recovery partition is big enough
* Fri Dec 16 2011 msAATTsuse.de- fixed typo in variable naming, a byte value should be in a variable whose name makes sure this actually is a byte value
* Fri Dec 16 2011 rjschweiAATTsuse.de- add writeXMLDiff method stub in test logger implementation to mimick the regular log object, this fixes the test failures when running tests as root
* Fri Dec 16 2011 msAATTsuse.de- added end partition alignment which needs to be aligned to head/sectors (aka 255
*63 in the loopback case). The end sector needs to end one block before the next cylinder starts. Additionally the value for what the kernel thinks about the heads sectors and sectorsize can be set via:
* --bios-heads
* --bios-sectors
* --bios-sector-size
* Fri Dec 16 2011 rjschweiAATTsuse.de- change resource file hierarchy, the resource file in the local directory wins over the one in the home directory (Globals.pm)- clean Globals.pm to level 5 critic- partial level 5 critic clean of Boot.pm
* Fri Dec 16 2011 msAATTsuse.de- DB: rebuild documentation
* Thu Dec 15 2011 rjschweiAATTsuse.de- add support for the new Amazon EC2 South America (announced as Sao Paulo) region
* Wed Dec 14 2011 msAATTsuse.de- fixed xen initrd inflate/deflate problem. Xen see the bootsplash at the end of the initrd as garbage and refuses to boot. With this patch we skip the bootsplash setup if it\'s xen (bnc #736491)
* Wed Dec 14 2011 msAATTsuse.de- fixed detection of clean-root before we remove it (bnc #736003)
* Wed Dec 14 2011 msAATTsuse.de- fixed disktype setup in getOVFConfig
* Wed Dec 14 2011 msAATTsuse.de- fixed SDK url\'s in the ppc boot images
* Wed Dec 14 2011 msAATTsuse.de- DB: rebuild schema documentation
* Wed Dec 14 2011 msAATTsuse.de- fixed/unify spec file license names/setup
* Wed Dec 14 2011 msAATTsuse.de- revert commit: 43be86a0aa57fb393e914c03d9c621b1dec0eb31 moved hook calls pre/postpartition back inside of the block
* Wed Dec 14 2011 msAATTsuse.de- removed used of binary only ovftool and added native support for creating the ovf machine description. So far only the basic information is setup in the ovf but this will be enhanced according to user requests. Along with the change support for the ova format has been added as well. ova is tar container including the actual image plus a manifest and the ovf XML description
* Tue Dec 13 2011 rjschweiAATTsuse.de- fix the OpenNebula example cloud node setup to ensure the cloud admin home directory gets properly nfs mounted on reboot for 12.1 using systemd
* Mon Dec 12 2011 msAATTsuse.de- fixed BEGIN block evaluation in KIWICollect.pm
* Mon Dec 12 2011 msAATTsuse.de- add a 30 second timeout for the LWP:UserAgent
* Mon Dec 12 2011 msAATTsuse.de- DB: rebuild documentation
* Fri Dec 09 2011 msAATTsuse.de- v5.01.8 released
* Fri Dec 09 2011 msAATTsuse.de- fixed udev database transfer. udev stores the database in /run and in /dev/.udev. kiwi did not take care for the information in /run which has a bad impact on systemd waiting for udev events which did not appear. Along with this fix the changes from commit 1a12ad0974ea were partially reverted. The obsolete udev rule is gone again and we don\'t use the exit control signal in udevSystemStop. The more failsafe udev exit code in the initrd udevKill() function has been tested and will stay there (bnc #731457)
* Fri Dec 09 2011 msAATTsuse.de- v5.01.7 released
* Fri Dec 09 2011 rjschweiAATTsuse.de- change the suggested repo for the aoetools package to be server:/ltsp the previously suggested project system:/aoetools does not appear to be maintained
* Thu Dec 08 2011 msAATTsuse.de- fixed split boot. setupBootPartition() behaved incorrectly with the split image because the read-write part is also used to store the boot configuration in this mode
* Thu Dec 08 2011 msAATTsuse.de- fixed --grub-chainload setup. In this mode the mbr from the master-boot-code package is used to call the grub installed into a partition. The code there was broken in a way that the filesystem on that partition was damaged
* Thu Dec 08 2011 msAATTsuse.de- fixed boot device setup for split build
* Thu Dec 08 2011 msAATTsuse.de- update 12.1 examples
* there is no default pattern anymore
* don\'t use recommended packages, zypper behaves strange here and starts to install a kernel-debug and other unwanted packages
* Thu Dec 08 2011 msAATTsuse.de- fixed 32bit xen domU build for 12.1 JeOS template xen and xen-tools only exists on 64bit 12.1 distro
* Thu Dec 08 2011 rjschweiAATTsuse.de- update example to work with OpenNebula 3.0 packages in OBS- open nebula example fixes regarding network detection on cloud node- open nebula example update the 12.1 example to work with systemd
* Thu Dec 08 2011 msAATTsuse.de- fixed some typos when displaying schema validation error messages
* Wed Dec 07 2011 msAATTsuse.de- fixed repo file check if alias names with \'/\' content is used
* Wed Dec 07 2011 msAATTsuse.de- fixed handling of dm devices in udev database of the kiwi initrd to prevent systemd to block on boot (bnc #731457)
* try to shutdown udev with \'udevadm control --exit\'
* try to cleanup udev database with \'udevadm info --cleanup-db\'
* add persistent udev rule for dm devices
* Wed Dec 07 2011 msAATTsuse.de- fixed rpmLibs() baselibs setup to use a tmp copy of ldconfig from the host system to allow to work with the other library tmp copies
* Mon Dec 05 2011 msAATTsuse.de- clean up build process
* moved swig to libsatsolver-devel. Only required if kiwi builds the legacy satsolver module if no perl-satsolver exists
* removed trang to get rid of java dependency. trang is used to transform kiwi\'s rnc schema code into the rng syntax. If the rng is up to date the build doesn\'t have to create it though
* removed obsolete Qt requirement. The tool which needed this is not packaged/required anymore
* make the build work for the arm architecture
* Mon Dec 05 2011 msAATTsuse.de- remove obsolete code and speedup removal of files in suseStripInitrd
* Fri Dec 02 2011 msAATTsuse.de- v5.01.6 released
* Fri Dec 02 2011 msAATTsuse.de- fixed changelog creation tool:
* date string is not recognized if not from a +X timezone
* indention of sub entries not correctly set
* Fri Dec 02 2011 rjschweiAATTsuse.de- fix the systemctl command for inserting and removing services for systemd the command is systemctl enable/disable NAME.service not service_NAME.service
* Fri Dec 02 2011 msAATTsuse.de- v5.01.5 released
* Thu Dec 01 2011 msAATTsuse.de- fixed suseInsertService and suseRemoveService to use systemctl if systemd is installed
* Wed Nov 30 2011 rjschweiAATTsuse.de- remove systemd specific check, systemd is the default for 12.1, no specific entry is required in menu.lst- add quiet commandline option in menu.lst to avoid having kernel message show up in the console for 12.1
* Tue Nov 29 2011 msAATTsuse.de- fixed setLoopDeviceMap() to work with yaboot
* Tue Nov 29 2011 msAATTsuse.de- fixed setLVMDeviceMap() to work with yaboot
* Tue Nov 29 2011 msAATTsuse.de- cleanup device map setup for ppc and integrate yaboot bootloader setup into the setupBootLoaderStages and setupBootLoaderConfiguration functions like all others
* Mon Nov 28 2011 msAATTsuse.de- added support for plain tar image type named \'tbz\'. This image type just builds a bz2 compressed tarball from the prepared tree as requested in report (bnc #732797)
* Mon Nov 28 2011 msAATTsuse.de- fixed unit test for valid arch check
* Fri Nov 25 2011 msAATTsuse.de- before adding a repo check if it already exists. if yes remove it prior to add it
* Fri Nov 25 2011 msAATTsuse.de- v5.01.4 released
* Fri Nov 25 2011 msAATTsuse.de- fixed parameter quoting of setupBootLoader() functions (bnc #729315)
* Thu Nov 24 2011 msAATTsuse.de- fixed unused declaration of result variable
* Thu Nov 24 2011 msAATTsuse.de- sed -ie behaves differently than sed -i -e, weird
* Thu Nov 24 2011 msAATTsuse.de- fixed zypper repo setup. Don\'t let --raw-cache-dir point to cache-dir. Redirecting raw-cache-dir to cache-dir makes packages/ and solv/ appear to be orphaned raw metadata caches for ex-repos packages and solv. Also don\'t re-add the repo if it\'s already there. Just update the path for local repos to work with the bind mounted path inside the chroot. (bnc #731090)
* Thu Nov 24 2011 msAATTsuse.de- fixed spec file to build on RHEL as well
* Thu Nov 24 2011 msAATTsuse.de- added s390 pxeboot client configuration examples
* Wed Nov 23 2011 msAATTsuse.de- clean up ppc code. make sure loader variable is passed to the yaboot configuration. Also handle partition layout and bootloader setup according to the bootloader value and not according to the architecture value
* Wed Nov 23 2011 rjschweiAATTsuse.de- properly handle specification of \"scsi\" controller type for VMWare images This requires the \"-o scsi\" option to be present for the qemu-img command on the build machine.- implement new check in RuntimeChecker to verify that qemu-img supports proper option if controller=\"scsi\" is specified and a vmdk image is being built- clean KIWIRuntimeChecker to critic level 4
* Tue Nov 22 2011 msAATTsuse.de- fixed --info/packages output to respect image typed packages sections. getInstallSize() now behaves the same like when the system is actually prepared
* Tue Nov 22 2011 msAATTsuse.de- v5.01.3 released
* Tue Nov 22 2011 msAATTsuse.de- allow initrd variable NON_PERSISTENT_DEVICE_NAMES. If set to a non empty string it will cause getDiskID() to return the non persistent kernel device node name like /dev/sda. This is to support storage devices with name conflicts when using the udev generated node names.
* Mon Nov 21 2011 msAATTsuse.de- wait a second before rereading the partition table in initGeometry
* Mon Nov 21 2011 msAATTsuse.de- apply quoting of .profile contents during build (bnc #729315)
* Mon Nov 21 2011 msAATTsuse.de- fixed inode count calculation. Since vmmbytes is the image size in MB, we need to mutiply it to get the count right because inode ratio is in bytes/inode
* Mon Nov 21 2011 msAATTsuse.de- update repo paths for kiwi specific rhel6 packages
* Mon Nov 21 2011 msAATTsuse.de- fixed call of checkmedia (bnc #730763)
* Mon Nov 21 2011 msAATTsuse.de- v5.01.2 released
* Mon Nov 21 2011 msAATTsuse.de- fixed creation of useless udev tmpfs in udevStart() because this is created as devtmpfs/tmpfs properly in createInitialDevices() which is called in udevStart
* Mon Nov 21 2011 msAATTsuse.de- in LVM case on ppc the boot partition should be fat16 (part type c)
* Sun Nov 20 2011 msAATTsuse.de- shorten verification message in suse-dump
* Sun Nov 20 2011 msAATTsuse.de- cleanup run-init code, prevent redundant calls
* Sun Nov 20 2011 msAATTsuse.de- make sure /sbin/ifup stays in the initrd
* Fri Nov 18 2011 msAATTsuse.de- prevent umount of fstab listed subvolumes before calling systemd. The former sysvinit did not like if another than the root filesystem was mounted at call time but systemd handles this differently and times out when processing the fstab listed entries
* Thu Nov 17 2011 msAATTsuse.de- make sure fat16 is used for boot partition on ppc
* Thu Nov 17 2011 msAATTsuse.de- adapt common changes in the x86 oem boot code to the ppc code also make sure partition table layout on ppc is the same than on all other architectures
* Thu Nov 17 2011 msAATTsuse.de- adapt common changes in the x86 oem boot code to the s390 code
* Wed Nov 16 2011 msAATTsuse.de- use $pID instead of fixed number
* Wed Nov 16 2011 msAATTsuse.de- DB: rebuild documentation
* Wed Nov 16 2011 msAATTsuse.de- DB: update documentation, added section about boot image customization- DB: update documentation, added list of hook names and their meaning
* Tue Nov 15 2011 msAATTsuse.de- added isoboot description for rhel/centos 6.0
* Tue Nov 15 2011 msAATTsuse.de- fixed getDeleteList() to take care if a package was added as bootincluded that it is not removed by an entry in the delete type packages section. A warning message is added to the log file that this package is ignored in the delete list, thus it will be installed. This problem often appear if one added a package to be included in the initrd but the initrd image description marked this package as to be deleted
* Tue Nov 15 2011 msAATTsuse.de- make sure the default strip tools and libs are appended if one has specified such a strip section in the system image description (bnc #720933)
* Tue Nov 15 2011 msAATTsuse.de- added lvm2 to 12.1 JeOS
* Tue Nov 15 2011 msAATTsuse.de- added support for dracut in setupRHELInitrd
* Tue Nov 15 2011 msAATTsuse.de- allow strip sections to be part of the system image. This provides full control over the initrd striping code for items to delete and tools and libraries to stay (bnc #720933)
* Tue Nov 15 2011 msAATTsuse.de- removed fixed strip lists from suseStripInitrd() and provide a default strip table in KIWIConfig.txt. There is now the strip section which can be of type \'delete\', \'libs\' or \'tools\' the delete typed section specifies files to remove from the initrd. The tools typed section specifies the tool names in /bin|/sbin|/usr/bin/|/usr/sbin which should stay whereas all other tools in that directories are removed. And the libs typed section specifies those libraries which has to stay whereas all other libraries without any ldd reference are removed. (bnc #720933)
* Tue Nov 15 2011 msAATTsuse.de- save some space in the initrd by removing licenses and iptables packages. Added them in the type=\"delete\" sections
* Mon Nov 14 2011 msAATTsuse.de- fixed typo in error message
* Sun Nov 13 2011 msAATTsuse.de- fixed spec file: rhel vmxboot available on x86 and x86_64 only
* Fri Nov 11 2011 rjschweiAATTsuse.de- add collection of perlcritic exceptions to the statistics collector- change collector such that only the next scan time is written and not he whole \"old\" content that does not change. New data is added to the file at the end- add the doc stats collector provided by Thomas, this is not yet integrated, but I thought we shouldn\'t loose the code- register the collector code in the hook
* Fri Nov 11 2011 msAATTsuse.de- DB: rebuild documentation, mention Microsoft HyperV (vhd) format
* Fri Nov 11 2011 msAATTsuse.de- update kiwi --help output to show supported vhd format
* Fri Nov 11 2011 msAATTsuse.de- renamed image format vpc to vhd. vhd seems to be the well known name for Microsoft HyperV images (bnc #729857)
* Fri Nov 11 2011 msAATTsuse.de- v5.01.1 released
* Fri Nov 11 2011 msAATTsuse.de- make sure IFS is restored in fdasdGetPartitionID
* Fri Nov 11 2011 rjschweiAATTsuse.de- integrate unit test run into the pre-commit hook
* if a file is changed that has an associated unit test and the test has not been executed after the changes were made the test is run prior to commit- fix the runTest code to generate a timestamp file when a test is run and it succeeds- clean up kiwiCommandLine.pm, kiwiLocator.pm, and KIWIXMLValidator.t to critic level 4
* clean up used to test new hook functionality- clean up KIWISharedMem.pm to critic level 5
* clean up used to test new hook functionality
* Fri Nov 11 2011 msAATTsuse.de- fixed type in runTests, also set execution bit on the script
* Fri Nov 11 2011 msAATTsuse.de- fixed creation of initial aligned partition table in KIWIBoot.pm In SuSE studio the loop device which is normally the target for parted is relinked behind the scene to a virtio device. As result parted now sees a real disk geometry and that induced the bug in kiwi which is not visible if it operates on the file mapped loop device only. Looking at that partition code has turned out that the alignment is broken which in the end broke the repartition process in the first boot of an oem install image. The code is now fixed to work properly on any storage device (bnc #729636)
* Thu Nov 10 2011 rjschweiAATTsuse.de- modify Makefile to create timestamp files when tests are run- add .gitignore file to ignore timestamp files and timestamp directory- implement trigger files
* each trigger file contains a list of tests that should be run when the module with the equivalent name is changed. For example if KIWIXML.pm changes, the tests listed in KIWIXML.trig will be run- implement runTests
* contains the logic to execute tests as needed based on the trigger files and dependent on the timestamps
* this script needs to be integrated into the pre-commit hook to assure the appropriate tests get run prior to commit
* Thu Nov 10 2011 msAATTsuse.de- update rng schema due to last change in rnc
* Thu Nov 10 2011 msAATTsuse.de- fixed fdasdGetPartitionID() it was completely broken. The function evaluates the wrong information and was also syntactically wrong... I should tell myself each day \'never code in a hurry\'
* Thu Nov 10 2011 rjschweiAATTsuse.de- add Perl module compile check to pre-commit hook
* any Perl file (ending in .t, .pl, .pl that is changed is run through \"perl -wc\" prior to commit to assure the code at least builds- clean the KIWIArchlist module to critic level 5 and fix the style to match the rest of the code
* Thu Nov 10 2011 msAATTsuse.de- fixed parameter quoting in setupBootLoader (bnc #729315)
* Thu Nov 10 2011 rjschweiAATTsuse.de- fix unit tests
* earlier update of ktLog broke the tests due to initialization problem with q{ } vs q{}, the later producing an empty string, the former a string with one space character, thus not empty. Empty string initialization is required in other parts of the code.
* Thu Nov 10 2011 rjschweiAATTsuse.de- include new EC2 region (US-West2), update the EC2 kernel IDs to the newly released v1.02 IDs, update code and docs, also fix the regular expression in hook to properly deal with .txt extension, i.e. ignore those files
* Thu Nov 10 2011 rjschweiAATTsuse.de- fix compile error (errant character g at EOL)
* Wed Nov 09 2011 msAATTsuse.de- make sure partedSectorInit() comes up with an initial value for the start sector if the partition table is empty (bnc #729251)
* Wed Nov 09 2011 msAATTsuse.de- turn all fixed flaged http:// URI\'s in the x86 boot images into more flexible obs:// URI\'s
* Wed Nov 09 2011 msAATTsuse.de- if an obs:// path can\'t be resolved, turn it into an opensuse path and try again. That way you can use one URI to build the image inside the buildservice and also outside with network access
* Wed Nov 09 2011 msAATTsuse.de- changed cache creation. the cache is created from the image description referenced by --init-cache and we prevent the split into packages and patterns and the weird cache template in modules/KIWICache.kiwi. This allows to create cache only image descriptions whose only purpose is to create caches
* Wed Nov 09 2011 msAATTsuse.de- fixed doubled my declaration of the same variable
* Wed Nov 09 2011 rjschweiAATTsuse.de- level 5 critic clean up, fix up the level 5 list in the hook
* Wed Nov 09 2011 rjschweiAATTsuse.delevel 5 clean up of Collect and style clean up to make it match the style of the rest of the KIWI code
* Tue Nov 08 2011 msAATTsuse.de- remove tmpdir directory only if it exists
* Tue Nov 08 2011 msAATTsuse.de- fixed setLogFile path writable check (bnc #728885)
* Tue Nov 08 2011 msAATTsuse.de- removed dead code in iso boot code due to the removal of the swap file support (bnc #728645)
* Tue Nov 08 2011 msAATTsuse.de- added options --xattrs and --acls when using rsync
* Tue Nov 08 2011 msAATTsuse.de- fixed importFile to filter out empty lines and also match comment lines starting with space/tab before \'#\' (bnc #728357)
* Tue Nov 08 2011 msAATTsuse.de- use mktemp to create tmp dir in setupInstallFlags
* Tue Nov 08 2011 msAATTsuse.de- v4.99.1 released
* Tue Nov 08 2011 msAATTsuse.de- fixed importFile to allow \'\\\' characters (bnc #728357)
* Tue Nov 08 2011 rjschweiAATTsuse.de- work on critic level 5 clean up, this is mostly low hanging fruit. Also cleaned up the level 5 list in the hook for files that were already level 5 clean
* Tue Nov 08 2011 rjschweiAATTsuse.de- include test code in perlcritic checks, clean ktTestCase to level 3
* Mon Nov 07 2011 msAATTsuse.de- critic: ktLog.pm now at level 2- critic: KIWIXMLValidator.pm now at level 5- critic: added .perlcriticrc with following settings:
* allow mixed case naming
* no check for module VERSION
* disable check for RCS strings
* Mon Nov 07 2011 msAATTsuse.de- fixed importFile() to correctly match variable names and make it more robust against quoting issues (bnc #728357)
* Mon Nov 07 2011 msAATTsuse.de- make sure importFile() stays backward compatible and ensures proper quoting. Also make sure the prefixed variable copy is only created if a prefix was set (bnc #728357)
* Mon Nov 07 2011 msAATTsuse.de- switch from tar to rsync based copies. Reason for the change is because tar doesn\'t support file attributes like xattr,acls and fscaps (bnc #728312)
* Mon Nov 07 2011 msAATTsuse.de- removed left over debug message from KIWIXMLValidator.pm
* Mon Nov 07 2011 msAATTsuse.de- DB: rebuild documentation
* Mon Nov 07 2011 msAATTsuse.de- DB: update documentation, correct quoting for config.
* Mon Nov 07 2011 msAATTsuse.de- DB: rebuild documentation
* Mon Nov 07 2011 msAATTsuse.de- DB: update documentation, correct quoting for config.
* Mon Nov 07 2011 msAATTsuse.de- don\'t create a swap file if no swap partition can be found in the live iso boot code. people complained about the creation of swap files while this is not expected.
* Sun Nov 06 2011 msAATTsuse.de- fixed setupNetworkInterfaceS390 qeth_configure execution- added setupNetworkInterfaceS390 to s390 netboot preinit to create the relevant udev rules
* Sun Nov 06 2011 rjschweiAATTsuse.de- initial implementation of code statistics collector
* Sat Nov 05 2011 rjschweiAATTsuse.de- added git pre-commit hook to check the code with perlcritic git hooks are placed as source in the git in \'.git-hooks\'- put KIWIURL module to level 5- put KIWILocator module to level 4
* Sat Nov 05 2011 rjschweiAATTsuse.de- clean up to level 5 perlcritic, also found some syntax errors
* Fri Nov 04 2011 rjschweiAATTsuse.de- added new chapter providing basic installation instructions
* Thu Nov 03 2011 msAATTsuse.de- v4.98.14 released
* Thu Nov 03 2011 msAATTsuse.de- fixed check for empty variable in shell code
* Thu Nov 03 2011 msAATTsuse.de- v4.98.13 released
* Thu Nov 03 2011 msAATTsuse.de- setupDefaultGateway uses route but route was not part of the initrd
* Thu Nov 03 2011 msAATTsuse.de- fdasdGetPartitionID uses awk but awk was not part of the initrd
* Thu Nov 03 2011 msAATTsuse.de- moved hook calls pre/postpartition outside of the block which allows to skip the partition code via the hook script
* Wed Nov 02 2011 msAATTsuse.de- fixed repartition code to create an aligned table (bnc #721580)
* Mon Oct 31 2011 msAATTsuse.de- setup PXE_IFACE interface only if PXE_IFACE exists in the environment. When using zPXE this variable does not exist
* Mon Oct 31 2011 msAATTsuse.de- fixed setupNetworkStatic to write correct interface file
* Mon Oct 31 2011 msAATTsuse.de- removed static inittab and securetty overlay files from s390 JeOS template. The setup is done by setupConsole() in preinit
* Mon Oct 31 2011 msAATTsuse.de- call runPreinitServices in s390 netboot suse-preinit
* Mon Oct 31 2011 msAATTsuse.de- turn pxe PART info tranformation functions into a generic and a fdasd specific function
* Mon Oct 31 2011 msAATTsuse.de- added pxePartitionInputS390 suitable for use with fdasd
* Mon Oct 31 2011 msAATTsuse.de- added pxeRaidPartitionInputS390 suitable for use with fdasd
* Mon Oct 31 2011 msAATTsuse.de- v4.98.12 released
* Mon Oct 31 2011 msAATTsuse.de- s390 netboot:
* make sure the VTOC table is created prior to any fdasd call
* make sure searchBusIDBootDevice is called to set the device in $DISK online by a custom DEVICE_INIT command
* Mon Oct 31 2011 msAATTsuse.de- added support for custom s390 device init command in the searchBusIDBootDevice function. This is required if the s390 client was not booted by an ipl command but e.g. via zPXE
* Sun Oct 30 2011 msAATTsuse.de- fixed migration code:
* fixed creation of URL list from zypper information
* write current schema version (5.3) XML
* fixed creation of KIWISatSolver objects
* Sat Oct 29 2011 msAATTsuse.de- added support for Microsoft Hyper-V machine image format . This requires a qemu version which supports the vpc format conversion (fate# 309765)
* Sat Oct 29 2011 msAATTsuse.de- fixed migration module to work again. Added 11.4 and 12.1 paths and make sure the global object pointer is there when it is accessed
* Fri Oct 28 2011 msAATTsuse.de- v4.98.11 released
* Fri Oct 28 2011 msAATTsuse.de- make sure the seq command is part of the initrd used in convertCIDRToNetmask()
* Thu Oct 27 2011 msAATTsuse.de- make sure pxeSetupDownloadServer() uses a deadline of 30sec in the ping check. Otherwise it might happen that the server online check fails even though the machine is online
* Thu Oct 27 2011 msAATTsuse.de- v4.98.10 released
* Thu Oct 27 2011 msAATTsuse.de- removed __checkNameValid() checker function and make sure that an arch string as part of the name attribute doesn\'t cause any trouble (bnc #716992)
* Thu Oct 27 2011 msAATTsuse.de- v4.98.9 released
* Thu Oct 27 2011 msAATTsuse.de- arch check in __checkNameValid is too restrictive
* Thu Oct 27 2011 msAATTsuse.de- v4.98.8 released
* Thu Oct 27 2011 msAATTsuse.de- fixed quoting of parameters in config.isoclient
* Thu Oct 27 2011 msAATTsuse.de- DB: update documentation
* Thu Oct 27 2011 msAATTsuse.de- reverted commit 620e4e65d05b257e4fc8c6017908e6ba9f75e28e this was a parted bug which is now fixed
* Thu Oct 27 2011 rjschweiAATTsuse.de- add unit test to the locator for the createTmpDirectory method, change one of the messages from info to error in the locator, update my e-mail address
* Thu Oct 27 2011 rjschweiAATTsuse.dechange URL in spec file to point to the new homw of the source, github vs. berlios
* Thu Oct 27 2011 rjschweiAATTsuse.degenerated html doc
* Wed Oct 26 2011 msAATTsuse.de- v4.98.7 released
* Wed Oct 26 2011 msAATTsuse.de- fixed appliance name escaping. One can use any string for the displayname attribute which is now properly escaped via perl\'s quotemeta(). Along with this change the image name attribute must match the pattern [a-zA-Z0-9_\\-\\.] and is not allowed to have the architecture string as part of the name (bnc #716992)
* Wed Oct 26 2011 rjschweiAATTsuse.deadd section about cross platform build, expand the introductory section of chapter 4
* Wed Oct 26 2011 msAATTsuse.de- v4.98.6 released
* Wed Oct 26 2011 msAATTsuse.de- libcrc32 module depends on crc32c, but it does not state this dependency explicitely (modules.dep does not contain this information). Since KIWI relies od modules.dep to clean up unused modules in the initrd, this can break module loading. This patch ensures that the module is kept in the initrd and not purged.
* Wed Oct 26 2011 msAATTsuse.de- revert back to parted hex id\'s, this reverts commits: 47f8bf758861a3d8cdbc2c188024f423e6ee45db 47f8bf758861a3d8cdbc2c188024f423e6ee45db
* Wed Oct 26 2011 msAATTsuse.de- v4.98.5 released
* Wed Oct 26 2011 msAATTsuse.de- fixed creation of XML diff in log file
* Wed Oct 26 2011 msAATTsuse.de- fixed parted flag setup in KIWILinuxRC code, 12.1 and upstream parted doesn\'t support the hex id\'s like \'set type 0x..\'
* Wed Oct 26 2011 msAATTsuse.de- fixed KIWIXMLInfo unit test due to last --info changes
* Wed Oct 26 2011 msAATTsuse.de- call createURLList() only on demand. Also provide accessor methods for xml->{urllist} and xml->{urlhash}, don\'t access these object data directly anymore. createURLList() was called in the KIWIXML constructor but changes to the XML might happen at a later point in time. So it makes sense to build the final URL list when access to it is requested
* Tue Oct 25 2011 msAATTsuse.de- call setupNetworkStatic in suse-preinit for s390. With this change we write the network configuration as received by the initrd into the system config files below /etc/sysconfig
* Tue Oct 25 2011 msAATTsuse.de- added function convertCIDRToNetmask() which allows the interpretation of the CIDR extension like 192.168.1.1/24 to create a standard netmask 255.255.255.0 out of it.
* Tue Oct 25 2011 msAATTsuse.de- fixed use of uninitialized value $free in KIWIXML.pm
* Tue Oct 25 2011 msAATTsuse.de- make the info module write the imagescan XML into a tmpfile (bnc #726337)
* Tue Oct 25 2011 msAATTsuse.de- added log information about cylinder size and count- fixed parted flag setup, 12.1 and upstream parted doesn\'t support the hex id\'s like \'set type 0x..\'
* Mon Oct 24 2011 msAATTsuse.de- fixed default boot label selection in syslinux mode
* Mon Oct 24 2011 msAATTsuse.de- added support for overlay file and archive listing in info module
* Fri Oct 21 2011 msAATTsuse.de- fixed escaping of chown parameters (bnc #725706)
* Thu Oct 20 2011 msAATTsuse.de- added update repo path for 11.4 images due to grub bug (bnc #717836)
* Wed Oct 19 2011 msAATTsuse.de- check for FSTYPE == btrfs in createOriginSnapshot()
* Wed Oct 19 2011 msAATTsuse.de- fixed creation of btrfs origin snapshot. This is now done on first boot of the appliance and not after kiwi prepare
* Wed Oct 19 2011 msAATTsuse.de- added baseSetupBtrfsOrigin() function which allows to add an origin snapshot for the image root filesystem contents
* Tue Oct 18 2011 msAATTsuse.de- moved README to mkd style
* Tue Oct 18 2011 msAATTsuse.de- adapt README style
* Tue Oct 18 2011 msAATTsuse.de- v4.98.4 released
* Tue Oct 18 2011 msAATTsuse.de- fixed disk device setup in USB stick install mode
* Tue Oct 18 2011 msAATTsuse.de- added init=... bootloader setup if systemd is used
* Tue Oct 18 2011 msAATTsuse.de- v4.98.3 released
* Tue Oct 18 2011 msAATTsuse.de- update German translation .po file
* Tue Oct 18 2011 msAATTsuse.de- make sure locale .mo files are created
* Tue Oct 18 2011 msAATTsuse.de- update locale headers
* Tue Oct 18 2011 msAATTsuse.de- added support for setting up which volume should get the rest free space assigned in a LVM setup. Example: This will assign the rest space available in the volume group to the LVvar logical volume. rest space means either the size of the \'oem-systemsize\' element or if not set the entire rest space of the disk. If no \'all\' freespace attribute is set in the volume setup, the default volume LVRoot is used as before (bnc #724489)
* Mon Oct 17 2011 msAATTsuse.de- added clicfs COW file check prior to mounting it via clicfs_fsck if the check fails we disable persistent writing
* Mon Oct 17 2011 msAATTsuse.de- v4.98.2 released
* Mon Oct 17 2011 msAATTsuse.de- renamed suse-live-stick to suse-live-usbstick to allow package upgrade again. Details in (bnc #722452)
* Mon Oct 17 2011 msAATTsuse.de- prefer systemd over sysvinit if installed
* Mon Oct 17 2011 msAATTsuse.de- don\'t use --ignore-cow-errors when using a cow _file_
* Mon Oct 17 2011 msAATTsuse.de- make sure setupHybridPersistent() is called before the boot device is busy
* Mon Oct 17 2011 msAATTsuse.de- added missing __checkImageIntegrity() calls
* Mon Oct 17 2011 msAATTsuse.de- v4.98.1 released
* Mon Oct 17 2011 msAATTsuse.de- update XML data to new schema version 5.3
* Mon Oct 17 2011 msAATTsuse.de- fixed kiwiRuntimeChecker unit tests
* Mon Oct 17 2011 msAATTsuse.de- added a 30 sec timeout to searchBIOSBootDevice
* Sat Oct 15 2011 msAATTsuse.de- make searchBiosBootDevice more robust. The function probes for the boot device until found and does not expect all storage devices to be present at call time. There is still a problem in install mode where we need a list of all potential installation devices to be present at a certain point in time. The function waitForIdleEventQueue tries to address this but it\'s not race free
* Sat Oct 15 2011 rjschweiAATTsuse.derevamp the EC2 chapter, include instructions for using EBS, restructure organization
* Sat Oct 15 2011 rjschweiAATTsuse.dechange ec2region values to match reported regions from ec2-describe-regions comand, AP-Japan -> AP-Northeast, AP-Singapore -> AP-Southeast, change schema version to 5.3 to reflect the value change, implement xml convert from 5.2 to 5.3, update the tests and validation
* Fri Oct 14 2011 msAATTsuse.de- xen dom0 support exists only for x86_64 architecture in SLE11 SP2. Therefore we check for this arch in the boot image descriptions
* Fri Oct 14 2011 msAATTsuse.de- run \'make valid\' and store XML style changes
* Fri Oct 14 2011 rjschweiAATTsuse.defix repository path for EC2 repo in 11.3 EC2 example
* Fri Oct 14 2011 msAATTsuse.de- v4.97.5 released
* Thu Oct 13 2011 msAATTsuse.de- xen dom0 support exists only for x86_64 architecture in SUSE 12.1. Therefore we check for this arch in the boot image descriptions
* Thu Oct 13 2011 msAATTsuse.de- fetchFile does not handle special characters consistently. fetchFile \"some%20file\" with atftp correctly downloads \'some%20file\'. but with ftp curl converts the file name to \'some file\', which is not expected. This patch fixes this and makes the behavior consistent
* Wed Oct 12 2011 msAATTsuse.de- fixed use of uninitialized $count variable (bnc #455990)
* Wed Oct 12 2011 msAATTsuse.de- don\'t ignore size setup even if the size is smaller than the min size kiwi\'s min size is safe but includes spare space. people who want to overwrite that size can do it but on their own risk
* Wed Oct 12 2011 msAATTsuse.de- allow drivers section in the system image which will be added to the drivers section of the selected boot image. This allows to add custom driver information additional to the existing driver selection as part of the boot image (bnc #720933) Author: Marcus Schäfer
* Wed Oct 12 2011 msAATTsuse.de- fixed size calculation, use 4% overhead
* Wed Oct 12 2011 msAATTsuse.de- removed function waitForUSBDeviceScan and added new function waitForIdleEventQueue which waits for a specific amount of time to check whether new device nodes settle or not. if not the function will return
* Tue Oct 11 2011 msAATTsuse.de- removed obsolete files from the suse-11.3 examples
* Tue Oct 11 2011 msAATTsuse.de- added preException hook which runs inside the systemExcpetion function to allow further tasks before the exception message is printed and the shell/reboot/wait action happens
* Tue Oct 11 2011 msAATTsuse.de- fixed the check for the installed system in the netboot code if the luks encryption is used. The check calls luksOpen with luks_open_can_fail=yes. This means if the wrong passphrase is given the check will proceed with \'update is required\' and does not fail with a reboot exception in luksOpen
* Tue Oct 11 2011 msAATTsuse.de- added hooks preswap/postswap which run before the check and creation of the imageSwapDevice. This allows to setup your own swap device handling.
* Tue Oct 11 2011 msAATTsuse.de- allow luksOpen to fail if luks_open_can_fail is set- allow map name to be specified in luksClose
* Tue Oct 11 2011 msAATTsuse.de- fixed updateOtherDeviceFstab to make use of the prefix argument
* Mon Oct 10 2011 msAATTsuse.de- don\'t show the LUKS passphrase as part of the boot log
* Mon Oct 10 2011 msAATTsuse.de- fixed vgchange calls to take the volume group name as argument
* Mon Oct 10 2011 msAATTsuse.de- fixed multiple display of the same info messages when creating the virtual disk file
* Mon Oct 10 2011 msAATTsuse.de- added a workaround for the cylinder counting bug in parted. parted lists two different numbers for the amount of cylinders only one is correct. This patch uses the correct value displayed here. parted only shows different values if called on a loop device
* Sun Oct 09 2011 msAATTsuse.de- make suse-live-stick a real image example directory and not a link to the live iso description. This also fixes the upgrade problem between versions were suse-live-stick was a directory and the one were it is provided as a link (bnc #722452)
* Fri Oct 07 2011 msAATTsuse.de- v4.97.4 released
* Fri Oct 07 2011 msAATTsuse.de- make sure updateOtherDeviceFstab creates the mount point
* Fri Oct 07 2011 msAATTsuse.de- activate only volume group stored in $VGROUP, prevent vgscan
* Fri Oct 07 2011 msAATTsuse.de- fixed luksOpen to generate unique name for luksroot- fixed luksOpen to stop asking for the passphrase after 3 times- fixed updateOtherDeviceFstab to work in luks and/or RAID env- fixed luksOpen to wait until the mapper created the device- allow luks_pass to be set on the kernel commandline
* Thu Oct 06 2011 msAATTsuse.de- DB: rebuild documentation
* Thu Oct 06 2011 msAATTsuse.de- fixed race conditions in LOCAL_BOOT=yes code, we have to wait for the $disk device to appear before acting on it
* Thu Oct 06 2011 msAATTsuse.de- removed %pre section from spec, does not work with older distros
* Thu Oct 06 2011 msAATTsuse.de- fixed %pre script and filelist
* Thu Oct 06 2011 msAATTsuse.de- fixed doc upgrade, added pre-install script for kiwi-doc and also reverted the spec changes for the commits 275a601c and ced64858
* Thu Oct 06 2011 msAATTsuse.de- v4.97.3 released
* Thu Oct 06 2011 rjschweiAATTsuse.decorrect attribute name error, some word smithing around description
* Wed Oct 05 2011 msAATTsuse.de- added support for detecting multiple occurrences of the same MBR ID in searchBIOSBootDevice. Also make sure that this does not happen by writing a default MBR ID of 0xffffffff into the MBR when the bootloader is installed
* Wed Oct 05 2011 msAATTsuse.de- rewrote function CDMount into more clear parts, also fixed the waitForUSBDeviceScan which only checks dmesg for a string which doesn\'t appear anymore on newer kernels
* Wed Oct 05 2011 msAATTsuse.de- DB: update documentation, better intro page and contributor list
* Wed Oct 05 2011 msAATTsuse.de- added support for creating luks encoded squashfs images
* Tue Oct 04 2011 msAATTsuse.de- make sure luks devices are evaluated first
* Tue Oct 04 2011 msAATTsuse.de- added level sorting for LVM volumes to make sure e.g /opt is mounted before /opt/bob
* Tue Oct 04 2011 msAATTsuse.de- fixed spec file, make sure doc files get the %doc macro assigned
* Tue Oct 04 2011 msAATTsuse.de- fixed spec file, wrong use of %doc on directory causes the kiwi-doc package to fail the installation on upgrade with \'cpio: rename failed - Is a directory\'
* Tue Oct 04 2011 msAATTsuse.de- fixed typo, missing eol
* Tue Oct 04 2011 msAATTsuse.de- added mailing list info to README file
* Tue Oct 04 2011 msAATTsuse.de- fixed typo and wrote Linus correctly, Oh Oh sorry Linus
* Thu Sep 29 2011 msAATTsuse.de- make setupConsole code more clear
* Thu Sep 29 2011 msAATTsuse.de- let kiwi exit if a package setup script returns with ecode != 0
* Wed Sep 28 2011 msAATTsuse.de- DB: update documentation, new showlicense element
* Wed Sep 28 2011 msAATTsuse.de- added support for the new name element as part of the preferences section. This element allows to specify the base name of a license file which is displayed in oem images before the installation happens. It\'s possible to add more sections to display more licenses one after the other. If no such element is specified the default \'license\' and \'EULA\' files are searched to keep the system backward compatible
* Wed Sep 28 2011 msAATTsuse.de- added runtime check which makes sure that there are no bogus files included in archives. So far we check for YaST2 license files in /etc/YaST2/licenses
* Tue Sep 27 2011 msAATTsuse.de- added support for RHEL splashimage (redhat-logos)
* Fri Sep 23 2011 msAATTsuse.de- v4.97.2 released
* Fri Sep 23 2011 msAATTsuse.de- fixed RHEL authentication setup
* Fri Sep 23 2011 msAATTsuse.de- fixed typo in perl to bash list dereferencing
* Thu Sep 22 2011 msAATTsuse.de- use generic vgchange -an in cleanLoop to make sure the loop maps can be cleaned up even if we can\'t read the name of the volume group from the image
* Thu Sep 22 2011 msAATTsuse.de- fixed sysconfig template check to work on RHEL too- fixed init call for RHEL, does not work with run-init program
* Thu Sep 22 2011 msAATTsuse.de- added kernel to be installed in rhel-05.4-JeOS template
* Thu Sep 22 2011 msAATTsuse.de- fixed use of uninitialized value
* Thu Sep 22 2011 msAATTsuse.de- make sure mpath_wait program exists in initrd for RHEL
* Thu Sep 22 2011 msAATTsuse.de- fixed missing done flag for info message
* Thu Sep 22 2011 msAATTsuse.de- make sure loop module is loaded
* Thu Sep 22 2011 msAATTsuse.de- applied following changes to the ppc boot code
* fixed download of md5 file in oem pxe install mode
* make sure iputils is there in oemboot for pxe based installation
* allow installation via the kiwi install image into a ramdisk.
* Thu Sep 22 2011 msAATTsuse.de- fixed s390 netboot code:
* make sure there is also a lowercase version of cmdline params
* make sure cleanPartitionTable is called before setup
* make sure setupNetworkStatic also brings up the network
* Thu Sep 22 2011 msAATTsuse.de- applied following changes to the s390 boot code
* fixed download of md5 file in oem pxe install mode
* make sure iputils is there in oemboot for pxe based installation
* allow installation via the kiwi install image into a ramdisk.
* Wed Sep 21 2011 msAATTsuse.de- fixed download of md5 file in oem pxe install mode
* Wed Sep 21 2011 msAATTsuse.de- make sure iputils is there in oemboot for pxe based installation
* Tue Sep 20 2011 msAATTsuse.de- use ext3 filesystem for the boot partition
* Tue Sep 20 2011 msAATTsuse.de- make sure system filesystems like proc and friends are umounted in rhel-preinit
* Mon Sep 19 2011 msAATTsuse.de- allow long names in install iso images (-joliet-long) This is related to (bnc #716149)
* Mon Sep 19 2011 adrianAATTsuse.de[product] unpack themes in defined order
* Fri Sep 16 2011 msAATTsuse.de- v4.97.1 released
* Fri Sep 16 2011 msAATTsuse.de- fixed baseSetRunlevel() to work with systemd as well
* Fri Sep 16 2011 msAATTsuse.de- don\'t use fuser -k to kill the debug shell, that could cause the kill of other important processes like the fuse clicfs
* Fri Sep 16 2011 msAATTsuse.de- allow default path search for --init-cache too
* Fri Sep 16 2011 msAATTsuse.de- removed local s390 suse repo
* Fri Sep 16 2011 msAATTsuse.de- added SLE11 SP2 SDK repo for s390 boot images in order to receive the kiwi-tools package from there
* Tue Sep 13 2011 msAATTsuse.de- allow installation via the kiwi install image into a ramdisk. In order to activate this feature one has to specify the following on the kernel commandline: \'ramdisk=1\' The size of the ramdisk can be set by ramdisk_size= This fixes bug (bnc #717499)
* Mon Sep 12 2011 msAATTsuse.de- removed local x86 suse and rhel repo
* Mon Sep 12 2011 msAATTsuse.de- added 11.4 remote repo for oemboot
* Mon Sep 12 2011 msAATTsuse.de- moved RHEL5 repo from local to remote
* Mon Sep 12 2011 msAATTsuse.de- moved SLE11 repo from local to remote
* Mon Sep 12 2011 msAATTsuse.de- removed local kiwi repo from ppc boot images. There are no ppc packages provided in a repo by kiwi
* Mon Sep 12 2011 msAATTsuse.de- moved SLE10 repo from local to remote
* Mon Sep 12 2011 msAATTsuse.de- fixed __getPartID reg exp (bnc #716718)
* Sun Sep 11 2011 msAATTsuse.de- more colorful list image output
* Fri Sep 09 2011 msAATTsuse.de- v4.96.1 released
* Thu Sep 08 2011 msAATTsuse.de- DB: update documentation
* Thu Sep 08 2011 msAATTsuse.de- fixed addPackages. Only if the requested packages type was \'image\' it\'s allowed to add to \'bootstrap\' if there is no \'image\' typed packages section
* Thu Sep 08 2011 msAATTsuse.de- consistency fix for the vmxboot boot image descriptions. all kernels should belong to the same typed packages section
* Thu Sep 08 2011 msAATTsuse.de- added new option \'--edit-bootconfig \' and the XML attribute which allows to run a script before the bootloader is actually written. This allows custom changes to the bootloader setup files as requested in (bnc #667950)
* Wed Sep 07 2011 msAATTsuse.de- make use of devtmpfs if available
* Wed Sep 07 2011 adrianAATTsuse.de- This breaks multi arch medias, we need more complex solution here Revert \"- priorize repositories over fallback architectures\" This reverts commit ce611d35662473365cebdc41172653d287bcaa0e.
* Wed Sep 07 2011 msAATTsuse.de- fixed addPackages() function. In case the requested section type cannot be found the function will switch back to the bootstrap section.
* Wed Sep 07 2011 msAATTsuse.de- put isoboot kernel-rt package to bootstrap section.
* Wed Sep 07 2011 msAATTsuse.de- don\'t show output of pushd / popd in updateMTAB
* Wed Sep 07 2011 msAATTsuse.de- create mtab link in kiwi\'s chroot instead of touching an empty file
* Wed Sep 07 2011 msAATTsuse.de- fix updateMTAB() to create a /etc/mtab symlink if /proc/self/mounts exists. Otherwise leave /etc/mtab untouched
* Mon Sep 05 2011 msAATTsuse.de- use the same version of suse-dump for ppc and s390 arch
* Mon Sep 05 2011 msAATTsuse.de- the by-id device names can contain the \':\' sign which causes trouble when kiwi uses the same sign as data separator. This patch solves the problem for the evaluation of the instItems array in the suse-dump code
* Mon Sep 05 2011 msAATTsuse.de- add priority to the repository to the boot config of RHEL iso images. This will resolve the conflicts with the kiwi-tools package while creating the boot image.
* Mon Sep 05 2011 msAATTsuse.de- added support for vmxboot for RHEL 5.4. Thanks to Praveen
* Fri Sep 02 2011 msAATTsuse.de- v4.95.4 released
* Fri Sep 02 2011 msAATTsuse.de- fixed warning when checking for rpc_pipefs (bnc #711389)
* Fri Sep 02 2011 msAATTsuse.de- fixed checkLVMbind() to search for the lvm flag on the disk first. Only if the disk has that flag we search for the LVM devices.
* Thu Sep 01 2011 msAATTsuse.de- last commit causes a regression for non split types.
* Thu Sep 01 2011 msAATTsuse.de- fixed bootloader setup for split images
* Thu Sep 01 2011 msAATTsuse.de- added missing done() flag
* Wed Aug 31 2011 adrianAATTsuse.de- product build: avoid multiple handling of debug packages
* Wed Aug 31 2011 adrianAATTsuse.de- priorize repositories over fallback architectures
* Tue Aug 30 2011 msAATTsuse.de- more readable \'kiwi --list\' output
* Tue Aug 30 2011 msAATTsuse.de- make sure $prio variable is initialized empty for each repo validation (bnc #714927)
* Tue Aug 30 2011 msAATTsuse.de- fixed inline description of addRepository() function
* Sat Aug 27 2011 msAATTsuse.de- v4.95.3 released
* Sat Aug 27 2011 msAATTsuse.de- fixed BuildArch setup for sle11 build
* Sat Aug 27 2011 msAATTsuse.de- v4.95.2 released
* Sat Aug 27 2011 msAATTsuse.de- DB: rebuild schema documentation
* Sat Aug 27 2011 msAATTsuse.de- DB: rebuild documentation
* Sat Aug 27 2011 msAATTsuse.de- DB: update documentation concerning the new imageinclude attribute
* Sat Aug 27 2011 msAATTsuse.de- added a new attribute to the element called \'imageinclude\', a boolean. The code treats the attribute as having a \"false\" default value. When set to true (for using zypper package manager only at this point) the specified repository is added to the image being created, thus the repo is available to install additional packages or upgrade existing packages from within the running image.
* Sat Aug 27 2011 msAATTsuse.de- cleanup XML data from example image descriptions by the result of the kiwi XML pretty printer
* Sat Aug 27 2011 msAATTsuse.de- added RHEL/CentOS 5.x. compatible repodata for rhel-repo
* Sat Aug 27 2011 msAATTsuse.de- fixed %post for kiwi-templates. %post has to use the same ifarch selection as used by the %package section
* Fri Aug 26 2011 msAATTsuse.de- v4.95.1 released
* Wed Aug 24 2011 msAATTsuse.de- better version of baseSetupBootLoaderCompatLinks() which hardlinks the files to be able to access them from within the cpio archive
* Wed Aug 24 2011 msAATTsuse.de- make sure to have some spare space in filesystem images
* Wed Aug 24 2011 msAATTsuse.de- don\'t remove data from initial boot partition
* Wed Aug 24 2011 msAATTsuse.de- call setupBootPartition() only if systemIntegrity is != fine- clean up setupBootPartition, create mount points inside the initrd- clean up netboot code, setup bootid before mountSystem and let setupBootPartition do the setup of the boot contents
* Wed Aug 24 2011 msAATTsuse.de- added support for pxe luks encrypted images
* Wed Aug 24 2011 msAATTsuse.de- break up long code line into two
* Wed Aug 24 2011 msAATTsuse.de- added compat link menu.lst -> grub.conf, required by RHEL- added function baseSetupBootLoaderCompatLinks() which can be used to create the /usr/share/grub link to the stage files which kiwi expects in /usr/lib/grub. RHEL installs them in /usr/share/grub
* Tue Aug 23 2011 msAATTsuse.de- added parted 1.8.7 to RHEL5.4 repo
* Tue Aug 23 2011 msAATTsuse.de- fixed boot code: explicitly wait until the background job showing the progress information has finished
* Tue Aug 23 2011 msAATTsuse.de- let atftpProgress() read output directly so there is just one job- fixed fetchFile(): enable progress only for block devices, without this it showed the progress for md5 and other files when the first image download failed.- fixed fetchFile(): fbiterm does not work with serial console, added fallback when it fails- fixed fetchFile(): loadCode value from the background job is returned correctly now
* Tue Aug 23 2011 msAATTsuse.de- changed the image size calculation to leave not too much of free space. In case of a filesystem based image as less free space as possible is added. In case of a disk image we make sure to have ~100MB of free space. If a single boot partition is required we make sure to have min 150M to allow proper kernel updates
* Tue Aug 23 2011 msAATTsuse.de- make sure atftpProgress() finishes _after_ the atftp process has concluded the download, related to (bnc #713167)
* Tue Aug 23 2011 msAATTsuse.de- use $imageBlkSize as parameter for atftpProgress()- take care for handling of re-sent blocks in atftpProgress()- fixed atftp error output handling $TRANSFER_ERRORS_FILE vs. /tmp/atftp_trace- fixed atftp blocksize detection - with multicast the block number 1 does not have to be at the beginning
* Tue Aug 23 2011 msAATTsuse.de- added kiwi-media-requires meta package which recommends all packages which should be part of the distribution DVD
* Tue Aug 23 2011 msAATTsuse.de- rpmlint doesn\'t like empty files
* Tue Aug 23 2011 msAATTsuse.de- added atftpProgress() function which implements the progress information for atftp by watching the atftp trace output. atftp seeks in the output stream which forbids the use of pipes for the progress information (bnc #713167)
* Mon Aug 22 2011 msAATTsuse.de- make sure fribidi stays installed in netboot. It\'s required for the fbiterm based progress information (bnc #713173)
* Mon Aug 22 2011 msAATTsuse.de- don\'t use pipes in combination with atftp (bnc #713167)
* Mon Aug 22 2011 msAATTsuse.de- fixed typo, missing \'\
\' in info output
* Fri Aug 19 2011 msAATTsuse.de- v4.94.3 released
* Fri Aug 19 2011 msAATTsuse.de- don\'t remove netcfg from boot images. This would remove the etc/hosts file which might be required. Along with this change also fixed the cleanupResolvConf() function which has to reset the needResolvConf and needHosts flags in order to prevent a deletion at a later point in time (bnc #713158)
* Fri Aug 19 2011 msAATTsuse.de- don\'t call restoreCDRootData() and restoreSplitExtend() inside the global destructor of the KIWIImageCreator. If the functions are applied to the creation of a boot image it leads to errors because they are designed to operate on the system image root tree
* Fri Aug 19 2011 msAATTsuse.de- removed broken state setup in KIWILog which was used to detect whether we need a CR when printing the line or not. All that sucked and caused mystery empty lines in the log
* Fri Aug 19 2011 msAATTsuse.de- make sure loop maps are closed before installing grub. Also changed the way grub is called. We are creating a file with the commands first and then call grub ... --batch < file. It makes the code more readable and also allows to include the commands as part of the log file
* Thu Aug 18 2011 msAATTsuse.de- fixed zero timeout value handling in syslinux. A value of zero disables the timeout so we set the smallest possible value in that case which is 1/10sec
* Thu Aug 18 2011 msAATTsuse.de- increased amount of spare space 1.1 -> 1.5
* Thu Aug 18 2011 msAATTsuse.de- fixed evaluation of which output
* Thu Aug 18 2011 msAATTsuse.de- apply check for partitioner capabilities only for boot image types which actually use a partitioner; netboot and oemboot
* Wed Aug 17 2011 msAATTsuse.de- added pxe image type for s390 JeOS template
* Wed Aug 17 2011 msAATTsuse.de- added more useful repo path for s390 netboot
* Wed Aug 17 2011 msAATTsuse.de- added support for netboot on s390, still _experimental_ !
* Wed Aug 17 2011 msAATTsuse.de- changed ddn() function to also check for the \'_\' separator between the device and partition name
* Wed Aug 17 2011 msAATTsuse.de- fixed this path evaluation in build operation mode
* Wed Aug 17 2011 msAATTsuse.de- allow boottimeout of 0sec, also set the same default timeout of 10sec for the ext|syslinux setup
* Tue Aug 16 2011 msAATTsuse.de- reduced amount of spare space 1.5 -> 1.1
* Tue Aug 16 2011 msAATTsuse.de- fixed suse-11.4/suse-min-gnome package list
* Fri Aug 12 2011 msAATTsuse.de- v4.94.2 released
* Thu Aug 11 2011 msAATTsuse.de- fixed default label text for ext|syslinux setup
* Thu Aug 11 2011 msAATTsuse.de- fixed vfat boot partition id lookup in setupBootPartition()
* Thu Aug 11 2011 msAATTsuse.de- make sure the text message file isolinux.msg is created in case of a sys|extlinux based virtual disk image
* Thu Aug 11 2011 msAATTsuse.de- make sure loader variable is initialized as early as possible also make sure .profile is loaded inside the initialize() function. This allows to setup loader by the value of the kiwi_bootloader variable in an early phase
* Wed Aug 10 2011 msAATTsuse.de- make sure the which command is part of the initrd
* Wed Aug 10 2011 msAATTsuse.de- don\'t configure a graphics boot screen in grub if no bootscreen picture data is available
* Wed Aug 10 2011 msAATTsuse.de- allow init=/path/to/program option for kiwi images
* Tue Aug 09 2011 msAATTsuse.de- in 12.1 the sysconfig.kernel file has been changed into a sysconfig.kernel-mkinitrd file.
* Tue Aug 09 2011 msAATTsuse.de- suppress error message on stat evaluation for rpc_pipefs
* Mon Aug 08 2011 msAATTsuse.de- use getExecPath() to locate parted binary, also allow alternative location of parted inside the linuxrc code
* Mon Aug 08 2011 msAATTsuse.de- When the Boot image\'s repositories are updated/reconfigured, the priority and alias information is chopped off. This patch makes sure the priority information is retained.
* Mon Aug 08 2011 msAATTsuse.de- use getExecPath() to find the grub binary. Along with this change the extraction of the grub binary from the initrd has been removed. That binary never was called.- allow alternative location for the grub binary inside the linuxrc boot code
* Fri Jul 29 2011 msAATTsuse.de- cleanup splash directory in case of call interruption
* Fri Jul 29 2011 msAATTsuse.de- v4.94.1 released
* Fri Jul 29 2011 msAATTsuse.de- added support for download and verification progress information for pxe (netboot) images (bnc #708711)
* Thu Jul 28 2011 msAATTsuse.de- setup INITRD_MODULES for ppc correctly as ipr module is not included there by default.- includes only needed scsi and network modules for ppc based boot images
* Thu Jul 28 2011 msAATTsuse.de- setup serial console on JS21 ppc blade with correct baud rate
* Thu Jul 28 2011 msAATTsuse.de- added support for dmraid fake-raid controllers (bnc #708712)
* Thu Jul 28 2011 msAATTsuse.de- use the udev by-id path as device for the installation in suse-dump instead of the the standard unix device names (bnc #708712)
* Thu Jul 28 2011 msAATTsuse.de- added support for repo priority for the yum package manager backend
* Wed Jul 27 2011 msAATTsuse.de- fixed splash setup on recreation of the splash.install.gz initrd
* Wed Jul 27 2011 msAATTsuse.de- added function to check for boot image creation and call setupSplash only if we are building a boot image- fixed splash creation for iso images
* Wed Jul 27 2011 msAATTsuse.de- allow bootwait post dump action in combination with other post dump action
* Tue Jul 26 2011 msAATTsuse.de- increased performance of the splash creation. Instead of ripping the splash information out from the created initrd cpio archive, the splash files are now obtained from the unpacked tree and stored in a .spl file for appending it later to the final initrd (bnc #708357)
* Tue Jul 26 2011 msAATTsuse.de- fixed xsl 3.8 to 3.9 conversion, oem-align-partition,oem-dumphalt and oem-inplace-recovery were not handled correctly
* Tue Jul 26 2011 msAATTsuse.de- DB: fixed schemaversion value in documentation
* Tue Jul 26 2011 msAATTsuse.de- don\'t remove zypper cache dir unconditionally
* Mon Jul 25 2011 msAATTsuse.de- v4.93.3 released
* Mon Jul 25 2011 msAATTsuse.de- fixed deviceDisks setup in suse-dump. The code there should check if imageDiskDevice has a value otherwise the sed call will fail with an invalid expression
* Fri Jul 22 2011 msAATTsuse.de- v4.93.2 released
* Thu Jul 21 2011 msAATTsuse.de- fixed config dir path serach in --build mode
* Thu Jul 21 2011 msAATTsuse.de- added patch for genName creation. The generated name is now unique according to the repository name. This allows to use the cache zypper creates per repository again
* Wed Jul 20 2011 msAATTsuse.de- DB: rebuild documentation
* Wed Jul 20 2011 msAATTsuse.de- DB: use the 2 part version number for the documentation
* Wed Jul 20 2011 msAATTsuse.de- fixed .newrelease to just increase the release part of the new kiwi version string by one
* Wed Jul 20 2011 msAATTsuse.de- DB: rebuild images only if the .fig has changed
* Tue Jul 19 2011 msAATTsuse.de- fixed evaluation of AATTUmountStack. There were some mount points still active if $main::global->mount() is called multiple times each mount() call causes a reset to the AATTUmountStack which means some umount information got lost
* Mon Jul 18 2011 adrianAATTsuse.de- fix catalog handling failure on apple style medias
* Mon Jul 18 2011 adrianAATTsuse.de- do not try to run boot loader setup code when no boot loader exists
* Fri Jul 15 2011 msAATTsuse.de- v4.93.1 released
* Fri Jul 15 2011 msAATTsuse.de- fixed installstick creation if sys|extlinux bootloader is used. Also fixed size setup of install stick. Problem here was that the uncompressed size of the raw install file was used and not the compressed size which ends up in a too big installstick image
* Fri Jul 15 2011 msAATTsuse.de- added support for hybrid installiso media. In order to create the hybrid the attribute bootloader must be either set to syslinux or extlinux
* Thu Jul 14 2011 msAATTsuse.de- moved zypper version check outside of the loop. It\'s enough to check this one time
* Thu Jul 14 2011 msAATTsuse.de- improve the OpenNebula example. I recently created a separate package for the OpenNebula Web-UI server (sunstone) and with the package \"cleanup/separation\" from the main opennebula package showing how to use the Web-UI is easier now.
* Thu Jul 14 2011 msAATTsuse.de- use the --one-file-system option for tar when copying the system image tree. This prevents the copy of files existing beyond the local filesystem (bnc #705717)
* Thu Jul 14 2011 msAATTsuse.de- added log information if a hijacked command is called. That check only works inside the studio environment were a hijacked command has \'cmd\'_real replacement.
* Thu Jul 14 2011 msAATTsuse.de- fixed use of uninitialized value $ENV{\'HOME\'} (bnc #705717)
* Thu Jul 14 2011 msAATTsuse.de- added %post script for kiwi-templates which removes old JeOS template directories for distros we no longer support a JeOS image from.
* Wed Jul 13 2011 msAATTsuse.de- cleaned up relocateCatalog calls which does not receive a parameter anymore. Also fixed return value of fixCatalog function
* Wed Jul 13 2011 msAATTsuse.de- make sure relocateCatalog and fixCatalog is called for SuSE installation media (bnc #705208)
* Wed Jul 13 2011 msAATTsuse.de- added README file to make github happy
* Mon Jul 11 2011 msAATTsuse.de- use predefined set of configuration settings if a bootcd without system image was requested. The initrd itself doesn\'t contain further XML information so we set vga to normal and disabled the boot menu along with a boot timeout of zero seconds (immediate boot)
* Mon Jul 11 2011 msAATTsuse.de- fixed --bootcd creation mode
* Fri Jul 08 2011 msAATTsuse.de- v4.92.2 released
* Wed Jul 06 2011 msAATTsuse.de- activate NFS locking for nfsroot systems. This means the mount call doesn\'t use -o nolock anymore
* Wed Jul 06 2011 msAATTsuse.de- make sure rpc_pipefs is mounted if /var/lib/nfs/rpc_pipefs exists- force NFS version 3 for NFSROOT setup. In that case v4 features are not required
* Tue Jul 05 2011 msAATTsuse.de- added check if reading the md5 file was successful (bnc #703829)
* Tue Jul 05 2011 msAATTsuse.de- don\'t remove /etc/netconfig for nfsroot setup (bnc #672172)
* Tue Jul 05 2011 msAATTsuse.de- changed order of resize/check operation to check/resize
* Fri Jul 01 2011 msAATTsuse.de- v4.92.1 released
* Thu Jun 30 2011 msAATTsuse.de- added sle10 backward compatibility patches for losetup calls and partedGetPartitionID function. losetup in sle10 doesn\'t know about the --find option and parted in sle10 has a different machine (-m) output
* Thu Jun 30 2011 msAATTsuse.de- make sure to unset the cacheDir if selectCache failed
* Thu Jun 30 2011 msAATTsuse.de- removed -t option when mounting the squashfs image container in suse-dump. let libuuid decide that
* Thu Jun 30 2011 msAATTsuse.de- fixed typo, check for dialog program happened twice
* Wed Jun 29 2011 msAATTsuse.de- fixed and cleaned up disk size setup. There are two new functions __initDiskSize() and __updateDiskSize() which are used to create an initial disk size value and an update function if there are conditions which requires to increase the disk size. That actions are now also part of the kiwi log file
* Wed Jun 29 2011 msAATTsuse.de- fixed setupOverlay() in KIWIImage.pm to write back possible XML changes into the overlay tree to stay persistent in the cow file
* Wed Jun 29 2011 msAATTsuse.de- fixed cleanup of KIWIBoot instances in KIWIImageCreator
* Wed Jun 29 2011 msAATTsuse.de- increased chunk size in createSnapshotMap(). This increased the performance of image caches a lot
* Tue Jun 28 2011 msAATTsuse.de- allow firstboot and autoyast service to be enabled together (bnc #700105)
* Tue Jun 28 2011 msAATTsuse.de- remove use of hardcoded path for the mksquashfs program by using the KIWILocator::getExecPath() method
* Tue Jun 28 2011 msAATTsuse.de- added quoting of special characters for kiwi_oemtitle (bnc #702044)
* Mon Jun 27 2011 msAATTsuse.de- added support for pxe buffered write on destination device in fetchFile() function used for netboot images. By default a chunk size of 4k is used
* Mon Jun 27 2011 msAATTsuse.de- added network functions for s390 pxeboot. New functions are setupNetworkInterfaceS390, setupNetworkStatic, setupDefaultGateway setupDNS. Normally the pxe boot on x86 expects a DHCP server to provide all the required network services but on s390 pxe boot works together with a parm file containing that information which is evaluated by the new functions.
* Fri Jun 24 2011 msAATTsuse.de- fixed evaluation of buildtype in createImage(). There were some places which did not reference the build type as it is stored in the XML object. This could lead to the use of an uninitialized value if no primary type was set in the XML description and no type was explicitly selected
* Wed Jun 22 2011 msAATTsuse.de- changed 01-network.sh preinit script for s390 templates to use the same variable names as provided by the parm file when using the standard yast based installation
* Tue Jun 21 2011 msAATTsuse.de- added function includeKernelParametersLowerCase() which converts all cmdline paramters to lowercase variables
* Mon Jun 20 2011 msAATTsuse.de- systemd-sysvinit creates a symlink from \'/bin/systemd\' to \'/sbin/init\'. Unfortunately kiwi linuxrc tries to check for the file permissions which leads to a false positive rebootException (bnc #700603)
* Mon Jun 20 2011 msAATTsuse.de- changed __getBootSize() function so that it multiplies the calculated minimum boot space by 3 to allow proper kernel updates (bnc #698161)
* Mon Jun 20 2011 msAATTsuse.de- fixed thisPath() evaluation. When in create or upgrade mode the function did not use the value of the main::Prepare lookup file
* Mon Jun 20 2011 msAATTsuse.de- Apply some clean up to the recently submitted OpenNebula example. I made some changes to the packaging in OBS which allows me to simplify the image configuration.
* Thu Jun 16 2011 msAATTsuse.de- fixed build on Centos/Redhat, recommended packages like jing or zypper does not exist there so we had to check the distro in that case
* Thu Jun 16 2011 msAATTsuse.de- fixed the patternType validation bug reported by John Lund on the users list. The patch also adds a new test case xml file for the KIWIXMLValidator unit test.
* Thu Jun 16 2011 msAATTsuse.de- added a new example for 11.3, 11.4, and 12.1. This example demonstrates the use of Kiwi to create cloud setup images and a guest images for clouds based on the OpenNebula infrastructure.
* Sun Jun 12 2011 msAATTsuse.de- v4.91.2 released
* Sun Jun 12 2011 msAATTsuse.de- DB: fixed typo in URI documentation
* Fri Jun 10 2011 adrianAATTsuse.de- we need to go back to SHA1 for SLE 11 for now, zypp is not working with 256 yet.
* Fri Jun 10 2011 msAATTsuse.de- use hardlink instead of copy to create the init file in the initrd cpio archive
* Thu Jun 09 2011 adrianAATTsuse.de- make sure options for LogFile and RootTree are handled before createInstSource() is called
* Thu Jun 09 2011 adrianAATTsuse.de- switch to 11.1 PDB branch
* Thu Jun 09 2011 adrianAATTsuse.de- fix plugin to become usable with current kiwi code
* Wed Jun 08 2011 msAATTsuse.de- remove the call to sax2 in the 11.3 vm guest example, sax2 is no longer part of 11.3 and later as the X-server is self configuring. Also added code to allow the firstboot sequence to be initiated. While this particular example does not use the firstboot mechanism, someone basing their build of the example and trying to get firstboot to work would be hard pressed to find why it is not working.
* Tue Jun 07 2011 msAATTsuse.de- changed kiwi version number from a two part version into a three part version number: v4.91.1. The major and minor part of the version will not change with bugfix releases. The following rules should apply to the version number: major.minor.release. major change might include incompatible changes. minor change includes features and schema version updates. release change includes any kind of bugfixes
* Tue Jun 07 2011 msAATTsuse.de- update LICENSE file to latest version of GPLv2
* Tue Jun 07 2011 msAATTsuse.de- don\'t package empty file euca-setup- update license GPLv2, rpmlint complained about outdated address
* Tue Jun 07 2011 adrianAATTsuse.de- new perl complains about implicit parentheses
* Mon Jun 06 2011 msAATTsuse.de- added appliances that are not referenced in docbook and are intended to demonstrate image building and appliances in a broader view into the doc/examples/extras directory
* Mon Jun 06 2011 msAATTsuse.de- don\'t use a fixed value for the size of the boot partition. The size among others depends on how many kernels were installed. Thus a fixed value is always wrong. The new function __getBootSize() is used to check the actual size of the boot/
* area and this value is used to create the boot partition if required. In case of an oem image the re-creation of the boot partition happens based on the original boot partition size (bnc #698233)
* Mon Jun 06 2011 msAATTsuse.de- drop RPMQ dependency, package does not exist, but module is provdided already by inst-source-utils.
* Mon Jun 06 2011 msAATTsuse.de- DB: update documentation
* Mon Jun 06 2011 msAATTsuse.de- added openSUSE 12.1 template and boot image descriptions- removed openSUSE 11.1 and 11.2 docs plus template and boot image descriptions
* Mon Jun 06 2011 msAATTsuse.de- fixed location of squashfs in drivers section for sle10
* Mon Jun 06 2011 msAATTsuse.de- fixed ELOG_
* setup for ppc architecture. We use the hvc console for ppc and tty for all others
* Sat Jun 04 2011 msAATTsuse.de- activate build of kiwi-desc-netboot for ppc in spec file
* Sat Jun 04 2011 msAATTsuse.de- added support for pxe images on ppc architecture
* Fri Jun 03 2011 msAATTsuse.de- added squashfs in drivers section of SLE10 boot image descriptions
* Fri Jun 03 2011 msAATTsuse.de- v4.91 released
* Wed Jun 01 2011 msAATTsuse.de- added option -f to \'prove\' in order to show failed unit tests
* Wed Jun 01 2011 msAATTsuse.de- call the XML pretty printer when kiwi writes back the XML description to the unpacked image tree. The result is easier to read
* Wed Jun 01 2011 msAATTsuse.de- moved requirement back to genisoimage, after checking the code
* Wed Jun 01 2011 msAATTsuse.de- fixed build: unit testing requires iso and filesystem tools to be present in the buildsystem- fixed spec file: genisoimage is set as required but kiwi uses growisofs in the code which is provided by dvd+rw-tools
* Wed Jun 01 2011 msAATTsuse.de- fixed unit testing ktLog.pm, some functions from the real KIWILog module were missing in ktLog.pm
* Tue May 31 2011 msAATTsuse.de- allow username and password to be transfered via updateDescription / __updateDescriptionFromChangeSet
* Tue May 31 2011 msAATTsuse.de- added option --start-sector to kiwi. This allows to influence the default start sector 2048 to be another value e.g. 32 for the old style disk layout.
* Tue May 31 2011 msAATTsuse.de- fixed call of cleanup functions for KIWIBoot objects
* Tue May 31 2011 msAATTsuse.de- really fixed setupConsole to remove the ttyS0 console if no ttyS0 device exists (bnc #695948)
* Tue May 31 2011 msAATTsuse.de- fixed build: Added zypper to BuildRequires. This is needed in order to make the unit test run happy
* Fri May 27 2011 msAATTsuse.de- v4.90 released
* Fri May 27 2011 msAATTsuse.de- DB: update documentation, typo in ec2 docs
* Fri May 27 2011 msAATTsuse.de- eliminate use of global variable: XMLChangeSet
* Fri May 27 2011 msAATTsuse.de- DB: update documentation
* Thu May 26 2011 msAATTsuse.de- don\'t store DOM tree references in XML changeset- don\'t create a new KIWICommandLine object in KIWICache
* Thu May 26 2011 msAATTsuse.de- eliminate use of global variable: OverlayRootTree
* Thu May 26 2011 msAATTsuse.de- eliminate use of global variables:
* BootVMSystem
* BootVMSize
* StripImage
* ProfilesOrig
* PrebuiltBootImage
* ISOCheck
* CheckKernel
* LVM
* GrubChainload
* FatStorage
* Thu May 26 2011 msAATTsuse.de- fix the problem with an improper exit status on test failure. We now use prove (part of Perl) to execute the unit tests. Prove generates the proper exit status upon test failure.
* Wed May 25 2011 msAATTsuse.de- fixed spec file: The functionality provided with the kiwi-desc-usbboot package has moved into a new technology which is not provided by another package. Therefore the wrong provides entry was removed.
* Wed May 25 2011 msAATTsuse.de- enhanced setupConsole to remove the ttyS0 console if no ttyS0 device exists (bnc #695948)
* Wed May 25 2011 msAATTsuse.de- fixed setupConsole() if search string appears as comment
* Wed May 25 2011 msAATTsuse.de- use -t squashfs to mount the installation image. This works around the problem if libuuid doesn\'t know the squashfs signature
* Wed May 25 2011 msAATTsuse.de- eliminate use of global variables: ListXMLInfoSelection and RootTree
* Wed May 25 2011 adrianAATTsuse.de- minor cleanup: remove -C parameter for 12.1 style medias, -D is enough
* Wed May 25 2011 msAATTsuse.de- fixed bootloader setup if split image type is used
* Wed May 25 2011 msAATTsuse.de- eliminate use of global variable: LogFile- cleaned up init() function, removed redundant code and moved the listXMLInfo code into the main operations block
* Wed May 25 2011 msAATTsuse.de- adapt unit tests due to last KIWIXML ctor code changes
* Tue May 24 2011 msAATTsuse.de- eliminate global variable: Destination- fixed backtrace() output in debug mode, show only latest trace level the other trace levels are kept for further debugging
* Tue May 24 2011 msAATTsuse.de- eliminate use of global variable: ImageDescription- pass commandline object reference (cmdL) to KIWIXML objects and from there to KIWIURL objects.
* Tue May 24 2011 msAATTsuse.de- eliminate use of global vars: ImageCache and RecycleRoot- added check for global object in constructors- added perl-RPMQ as requirement for kiwi-instsource
* Tue May 24 2011 msAATTsuse.de- eliminate global variables used by main()
* Mon May 23 2011 msAATTsuse.de- eliminate use of global variables: main::FS
* and main::SetImageType
* Mon May 23 2011 msAATTsuse.de- cleanup kiwiExit calls
* Mon May 23 2011 msAATTsuse.de- s390: fixed disk online code, wait for disk device to appear (bnc #693031)
* Sun May 22 2011 msAATTsuse.de- fixed boot included archive installation in prepareBootImage
* Fri May 20 2011 msAATTsuse.de- moved .kiwirc into the tests/unit directory
* Fri May 20 2011 msAATTsuse.de- v4.89 released
* Fri May 20 2011 msAATTsuse.de- allow unit tests to run standalone without kiwi installed in /usr/share/kiwi
* Fri May 20 2011 msAATTsuse.de- DB: update schema documentation
* Fri May 20 2011 msAATTsuse.de- fixed obsoletes in spec file
* Fri May 20 2011 msAATTsuse.de- build arch of master kiwi can\'t be noarch if other arch specific sub packages will be created
* Fri May 20 2011 msAATTsuse.de- make rpmlint happy:
* don\'t package empty files
* don\'t package non unix file (dos2unix)
* don\'t package scripts without executable flag
* don\'t use unversioned obsoletes
* provide man pages with the master kiwi package
* make the master kiwi package noarch if possible
* require kiwi-tools version from the same master
* Fri May 20 2011 msAATTsuse.de- fixed stylesheet bugs: Thanks to Tom for looking at it
* A xsl:call-template cannot contain a mode attribute. Only xsl:apply-templates can have it. The affected files are convert39to41.xsl and convert41to42.xsl
* A is incorrect in two ways: First a xsl:copy needs to have something to copy in its _content_, second the select attribute is syntactically wrong; AATT means attribute, but which one? I guess, it should mean *\"/>. However, in this case it\'s totally useless as it copies
*all
* attributes, regardless of the for-each loop. So the for-each loop can never act as it was supposed to be.
* Fri May 20 2011 msAATTsuse.de- get unit test working again, due to restructuring changes- provide config and target location as arguments to prepareBootImage() and createBootImage(). Retrieving those from the CommandLine object is not following our functional separation model as the config dir and target dir for the initrd cannot be given on the command line and therefore should not be stored on the command line argument- refactor setting of XML parameters into methods for re-use
* Thu May 19 2011 msAATTsuse.de- run unit tests during package build if SUSE > 1130
* Thu May 19 2011 msAATTsuse.de- limit the validation of config.xml files in the Kiwi tree to files located outside the tests tree. config.xml files in the tests tree are not necessarily expected to be valid as we also need to do negative unit testing.
* Thu May 19 2011 msAATTsuse.de- fixed version update script
* Thu May 19 2011 msAATTsuse.de- cleanup situation around global variables. There is now a KIWIGlobals object which contains all global variables and functions. There are still some global variables in use which references options. Those should be handled by a KIWICommandline accessor
* Wed May 18 2011 msAATTsuse.de- fixed unit test kiwiImageCreator.pm- fixed
*.kiwi search in getControlFile
* Wed May 18 2011 msAATTsuse.de- moved the image create step into the KIWIImageCreator code There is now a function createImage / createBootImage which is also used by the build step. Along with this change I removed all occurences of the main::Survive variable and thus removed all recursive kiwi calls now from the code.
* Wed May 18 2011 adrianAATTsuse.de- do not enforce the need of a meta package, driver update disk is not needing one (on command from cwh)
* Tue May 17 2011 msAATTsuse.de- cleanup fix; don\'t create instances of KIWICommandLine if it\'s not necessary. Also removed redundant code in prepareBootImage
* Tue May 17 2011 msAATTsuse.de- make the user password optional; It is valid to have a user on a system that cannot login via password authentication. Therefore kiwi should not force a password assignment in the element
* Tue May 17 2011 msAATTsuse.de- fixed caching if used for boot images. Also fixed the check between the initial prepare with cache and the remount of a prepared tree with cache
* Tue May 17 2011 adrianAATTsuse.de- add SLE 11 SP 2 media style plugin, using sha256 sums for meta data
* Tue May 17 2011 adrianAATTsuse.de- fix installation directory of 12.1 plugin
* Tue May 17 2011 adrianAATTsuse.de- add openSUSE 12.1 media style, using sha256 meta data sums
* Tue May 17 2011 msAATTsuse.de- removed global variables CacheRoot and CacheRootMode and cleaned up the KIWICache code. Also added a new runtime check: __checkRootRecycleCapability which makes sure that a cache based root tree cannot be used in --recycle-root mode
* Tue May 17 2011 msAATTsuse.de- last fix using --numeric-owner was still broken. Robert has added a better and more robust patch to fix this
* Tue May 17 2011 msAATTsuse.de- use --numeric-owner option in tar to prevent the table layout to break if the user/group field in the tar -t output exceeds the field length
* Tue May 17 2011 msAATTsuse.de- don\'t strip vgrename command from initrd
* Mon May 16 2011 msAATTsuse.de- moved the following operation modes into the KIWIImageCreator: also fixed the unit tests and get rid of some recursive calls
* --setup-splash => createSplash()
* --bootusb => createImageBootUSB()
* --bootcd => createImageBootCD()
* --installcd => createImageInstallCD()
* --installstick => createImageInstallStick()
* --bootvm => createImageDisk()
* --convert => createImageFormat()
* Mon May 16 2011 msAATTsuse.de- make sure XML validation happens in each processing mode- fixed environment cleanup, added cleanup function in main
* Mon May 16 2011 msAATTsuse.de- fixed logging. Added function resetRootChannel which allows to split up the log at a certain point. This is used when one --init-cache call creates multiple caches and each one has a dedicated log file
* Mon May 16 2011 msAATTsuse.de- moved the upgrade code into the KIWIImageCreator object also removed the recursive upgrade call inside the create step and call the new function upgradeImage() instead
* Fri May 13 2011 msAATTsuse.de- fixed fixupOverlayFilesOwnership(), remove leading spaces from file names
* Fri May 13 2011 msAATTsuse.de- added unit tests for testing the KIWIImageCreator code
* Fri May 13 2011 msAATTsuse.de- added new KIWICache object and move out the cache code from the main kiwi.pl file into the new object code
* Thu May 12 2011 msAATTsuse.de- added new KIWIImageCreator object which will encapsulate the major kiwi processing modes like prepare, create, upgrade and others into module functions. So far the prepare step has been moved out and others will follow. The goal is to get rid of the global variable stack in kiwi as well as to remove the recursive kiwi calls
* Thu May 12 2011 msAATTsuse.de- unit test fixes:
* move test repo to sharable location, adjust XMLInfo test
* fixed removal of test directory, remove only if no mounts exists
* fixed test directory cleanup, remove only if no mount exists
* fixed broken unit test due to commit: c9c797b47cb4
* Wed May 11 2011 msAATTsuse.de- changed name of enableRootRecycle to setRootRecycle, better following the style of the KIWICommandLine functions
* Wed May 11 2011 msAATTsuse.de- fixed use of glob-type for filehandle in KIWIRoot.pm
* Wed May 11 2011 msAATTsuse.de- DB: fixed some typos in schema inline documentation
* Wed May 11 2011 msAATTsuse.de- expand command line object to handle more options. Also expand the unit tests for this options. This happened in preparation to the new KIWIImageCreator object which will encapsulate the kiwi build, prepare and create modes
* Wed May 11 2011 msAATTsuse.de- move knowledge about the default cache directory path into the KIWILocator module: getDefaultCacheDir()
* Wed May 11 2011 msAATTsuse.de- update unit test infrastructure in preparation for the new KIWIImageCreator object which will encapsulate the kiwi build, prepare and create modes
* Wed May 11 2011 msAATTsuse.de- remove outdated undocumented prechrootcall option
* Tue May 10 2011 msAATTsuse.de- fixed this:// path evaluation if used in --info mode (bnc #692813)
* Tue May 10 2011 msAATTsuse.de- enhanced the ddn() function to work correctly if a udev /dev/disk/ device name is specified as disk parameter (bnc #692629)
* Mon May 09 2011 msAATTsuse.de- integrate end-to-end testsuite written by Bernhard Wiedemann into kiwi. There is a kiwi --test-image ... mode now, and I added an example test to the 11.4 JeOS description. It\'s required to have the os-autoinst package installed in order to run a test (bnc #677789)
* Fri May 06 2011 msAATTsuse.de- v4.88 released
* Fri May 06 2011 msAATTsuse.de- fixed build for ia64 architecture
* Fri May 06 2011 msAATTsuse.de- added hook preNetworkRelease (bnc #691249)
* Wed May 04 2011 msAATTsuse.de- fixed the problem where the element is being dropped during XML file upgrade if the element is specified as a child of . The element is moved to every
* Wed May 04 2011 msAATTsuse.de- fixed xsl style sheets, apply changes only if the schema version of the input data is smaller than the style sheet version
* Wed May 04 2011 msAATTsuse.de- fixed typo in kiwi_bootloader evaluation (bnc #691424)- fixed hvc/xvc console setup, add entry only if missing (bnc #691424)
* Tue May 03 2011 rootAATTsuse.de- fixed disk offset calculation for zipl.conf creation, also fixed the lookup of the boot partition and the cleanup of the loop devices if the zipl bootloader is used (bnc #687927)
* Tue May 03 2011 msAATTsuse.de- switch back to by-id device name schema (bnc #691199) This reverts commit: f1e31c85689d6925b9c3069a845f5e252c838936
* Tue May 03 2011 msAATTsuse.de- fixed first type selection for a subset of types selected by profiles. This is a follow up fix for (bnc #690554)
* Tue May 03 2011 msAATTsuse.de- DB: update documentation, FORCE_KEXEC feature (bnc #691247)
* Tue May 03 2011 msAATTsuse.de- added support for FORCE_KEXEC in kernelCheck function which allows to force the kexec call even if the kernel versions are the same (bnc #691247)
* Mon May 02 2011 msAATTsuse.de- removed pxeNotifyNewImage function. This is done inside the slepos specific code hooked in (bnc #691249)
* Mon May 02 2011 msAATTsuse.de- make sure bootincluded_archives.filelist contains only files
* Mon May 02 2011 msAATTsuse.de- move the createTmpDirectory code from the XML object to the Locator. Creating a directory really has nothing to do with XML processing, the Locator now handles local file system interaction, thus this is a better place.
* Mon May 02 2011 msAATTsuse.de- fixed reboot call in kernelCheck function (bnc #689294)
* Mon May 02 2011 msAATTsuse.de- fixed type selection if not type was specified and no primary attribute is set to any type. In that case the first type written in the XML description should be used (bnc #690554)
* Thu Apr 28 2011 msAATTsuse.de- also allow NFSROOT and AOEROOT to be set on the commandline (bnc #536309)
* Thu Apr 21 2011 msAATTsuse.de- v4.87 released
* Thu Apr 21 2011 msAATTsuse.de- fixed initial variable setup for haveDASD|ZFCP
* Thu Apr 21 2011 msAATTsuse.de- changed searchBusIDBootDevice() for the s390 architecture. All required information is now obtained from /sys/firmware/ipl According to this no additional kernel parameters are required to set the boot device online (bnc #689004)
* Thu Apr 21 2011 msAATTsuse.de- added alternative location for kiwi hooks scripts which is FHS compliant: /lib/kiwi/hooks/ (bnc #688792)
* Wed Apr 20 2011 msAATTsuse.de- added URL mapping table for the opensuse:// url type. When resolving this the regular expression based mapping table is used to create a valid location from the specified URI data. It\'s possible to extend the existing KIWIURL.txt table according to the needs of the user or service.
* Wed Apr 20 2011 msAATTsuse.de- changed xsl 51 to 52 conversion. The obsolete usb image type is removed from the XML input. this image type can be either replaced by an iso hybrid type or by an oem type. As there is a choice for the user the stylesheet will not make a decision here.
* Wed Apr 20 2011 msAATTsuse.de- netboot: added preLoadConfiguration hook: preLoadConfiguration: is called before the client. is loaded by kiwi and thus can be used to inject alternative code for loading the client configuration.- netboot: added postLoadConfiguration hook: postLoadConfiguration: is called after the client configuration has been loaded and imported and can be used for any action after the client configuration has exported its variables into the boot environment- netboot: renamed the default register file which is put on the pxe boot server if there is client configuration found. kiwi now put a file called: upload/client.$DHCPCHADDR which doesn\'t conflict with the files SLEPOS uses for registration- netboot: removed SLEPOS related code, posbios calls and the evaluation of the WORKSTATION_LDAP_IP variable. All this will be part of product specific hook scripts
* Wed Apr 20 2011 msAATTsuse.de- allow parameters to be passed to hook scripts
* Tue Apr 19 2011 msAATTsuse.de- added setupBootLoaderTheme() function which is called after the bootloader configuration has been written. The function adapts/sets the THEME variable in the /etc/sysconfig/bootsplash file according to the boot theme set in the kiwi XML configuration
* Mon Apr 18 2011 msAATTsuse.de- fixed suseStripFirmware to match in subdirectories below /lib/firmware/ too. firmware installed by the kernel packages for example were removed
* Fri Apr 15 2011 msAATTsuse.de- v4.86 released
* Fri Apr 15 2011 msAATTsuse.de- DB: update documentation. Added chapter about hook scripts
* Thu Apr 14 2011 msAATTsuse.de- merge in relevant changes from x86 boot image descriptions into the ppc and s390 boot images
* Thu Apr 14 2011 msAATTsuse.de- fixed build
* Thu Apr 14 2011 msAATTsuse.de- fixed boot partition id in suse-repart if syslinux is used as bootloader. We are using fat32 now (c)
* Thu Apr 14 2011 msAATTsuse.de- using sfdisk --id now, thus require sfdisk in spec file
* Thu Apr 14 2011 msAATTsuse.de- fixed getStorageID function and the evaluation of the return value of this function. The assumption that the partition id is a decimal value is wrong, thus calling int() on the result is not a good idea. man I really shouldn\'t code at midnight
* Thu Apr 14 2011 msAATTsuse.de- fixed setupSUSEInitrd function. We create imho poinless links named linux.vmx and initrd.vmx which are not used at all if the initrd could be generated by mkinitrd. Additionally the links are broken if the running kernel is not the same as the installed kernel. Therefore I removed the creation of that link files- fixed kernelList function. the code searching for installed kernels if the running kernel can\'t be found was never reached. Additionally the function did not search for other than the running kernel which seems to be wrong if multiple kernels are installed
* Thu Apr 14 2011 msAATTsuse.de- update config.sh scripts for the ec2 examples to ensure the ssh policy and inittab console settings are correct
* Thu Apr 14 2011 msAATTsuse.de- added new consistency check to enforce that ec2 formatted images are created as file system types. This required an update to a number of other config files used for Validator unit testing. Added new unit tests for the EC2 requirement.
* Wed Apr 13 2011 msAATTsuse.de- fixed parted type setup, use the form \'set [nr] type 0x[id]\' this is used to workaround a parted bug happening if you type \'set [nr] swap on\'. parted refuses to set this even though the help page in batch mode tells the user to do it exactly that way
* Wed Apr 13 2011 msAATTsuse.de- removed fat 8+3 kernel/initrd renaming code. This is no longer required when using a fat32 / vfat partition / filesystem- fixed kernelCheck() function: rewrote the code
* Wed Apr 13 2011 msAATTsuse.de- fixed fstab setup in ec2 format setup (bnc #687211)
* Tue Apr 12 2011 msAATTsuse.de- fixed syslinux kernel/initrd setup in resetBootBind()
* Tue Apr 12 2011 msAATTsuse.de- added syslinux to package list of JeOS images
* Tue Apr 12 2011 msAATTsuse.de- fixed partition id setup if parted is used
* Tue Apr 12 2011 msAATTsuse.de- added lvm2 to ix86 SLE11 JeOS template
* Mon Apr 11 2011 msAATTsuse.de- fixed the --lvm option. The option now adds a systemdisk element and behaves the same as if the users would have modified the XML accordingly
* Mon Apr 11 2011 msAATTsuse.de- make sure installBootLoader() is called for vmxboot image if a root overlay filesystem structure is used- move resetBootBind() into installBootLoader()
* Mon Apr 11 2011 msAATTsuse.de- call setupBootPartition() only on first boot
* Mon Apr 11 2011 msAATTsuse.de- added evaluation of kiwi_ramonly element for vmx too- added evaluation of kiwi_ramonly element for ppc and s390 arch- added evaluation of kiwi_ramonly element for non LVM setup
* Mon Apr 11 2011 msAATTsuse.de- fixed subsequent mount procedure of a clicfs based image. The resize2fs call has to happen in any case if the image is a ramonly system
* Fri Apr 08 2011 msAATTsuse.de- v4.85 released
* Fri Apr 08 2011 msAATTsuse.de- in KIWIRoot.pm the fixupOverlayFilesOwnership() function fails to quote the filaname which results in problems with files/directories with spaces in their names.
* Thu Apr 07 2011 msAATTsuse.de- Added a new consistency check and unit tests to ensure that config.xml files specifying an image type that requires an initrd set the boot attribute on the element.
* Wed Apr 06 2011 mbarringerAATTsuse.deFixing a problem with imagewriter\'s makefile
* Wed Apr 06 2011 mbarringerAATTsuse.deMinor fix to the command line help output in Imagewriter
* Wed Apr 06 2011 mbarringerAATTsuse.deFixing Imagewriter compilation w/ HAL support enabled
* Wed Apr 06 2011 msAATTsuse.de- don\'t use the result of a getExecPath() call happened outside of the chroot, for a command call inside the chroot. It might happen that the path to the binary is different inside the chroot and thus can\'t be found
* Wed Apr 06 2011 mbarringerAATTsuse.deFixing bnc#679099 - Imagewriter still requires HAL
* Wed Apr 06 2011 rootAATTsuse.de- added support for ZFCP devices
* Wed Apr 06 2011 msAATTsuse.de- added repodata information for s390 suse-sle11-repo
* Tue Apr 05 2011 msAATTsuse.de- if the target-device option is used kiwi normally doesn\'t create a disk image file until the image file is created by a dump off from the target device. SuSE studio requires the size information of the target disk before the dump off happens, because it creates that target device internally. Therefore this patch makes sure that a image disk file is created before the dump off happens
* Tue Apr 05 2011 msAATTsuse.de- moved from fat16 (0x6) to fat32 (0xc) for syslinux setup
* Tue Apr 05 2011 msAATTsuse.de- alpha sort the option parser
* Tue Apr 05 2011 msAATTsuse.de- fixed kiwiCommandLine unit test according to the changes done in commit: 7954bf3bed5845f4ece4991ef17f8f2978c8fbee
* Mon Apr 04 2011 msAATTsuse.de- created a repo to support new tests for size query and package install query. Additionally the common test case base class gets new methods to create a writable directory and to clean it up after the test
* Mon Apr 04 2011 msAATTsuse.de- fixed KIWICommandLine::setLogFile, it breaks for \'terminal\' logging- fixed KIWICommandLine::setAdditionalRepos, it breaks if numAlias and or numPrios is zero
* Mon Apr 04 2011 msAATTsuse.de- fixed solvable creation for old distros (sle10) providing uncompressed versions of suse/setup/descr/packages file
* Mon Apr 04 2011 msAATTsuse.de- fixed init(), creation of global kiwi log object is required for KIWIQX execution logging
* Mon Apr 04 2011 msAATTsuse.de- added repodata to kiwi provided suse-
* repos and move the repotype to rpm-md in all referencing XML descriptions
* Mon Apr 04 2011 msAATTsuse.de- removed test_cmdReplaceRepo_noRepoType test, it\'s valid to overwrite first repo without specifying a type
* Mon Apr 04 2011 msAATTsuse.de- renamed the test implementation and data base directory to be consistent with other tests, i.e. start with kiwi
* Sun Apr 03 2011 msAATTsuse.de- update spec file, added jing as recommended package
* Sun Apr 03 2011 msAATTsuse.de- added unit tests for the new KIWIXMLInfo object. Also break up the bigger tests into smaller test cases
* Sun Apr 03 2011 msAATTsuse.de- added a new KIWIXMLInfo object and eliminate the listXMLInfo() function from kiwi.pl
* Fri Apr 01 2011 msAATTsuse.de- v4.84 released
* Fri Apr 01 2011 msAATTsuse.de- added normalizeBootPath() function which allows to use the following boot attribute source locator prefixes:
* this:// => pointing to the image description directory
* system:// => pointing to /usr/share/kiwi/image
* dir:// => pointing to a directory if no source locator is set kiwi uses the path if it is an absolute path and in case of a relative path it checks if the path relative to the called directory exists and if not it also checks if the path exists below /usr/share/kiwi/image
* Fri Apr 01 2011 msAATTsuse.de- fixed repository setup for cache creation
* Thu Mar 31 2011 msAATTsuse.de- fixed LVM repartition code. if no recovery partition is requested just us the default end sector suggested by the partition tool
* Wed Mar 30 2011 msAATTsuse.de- fixed s390 LVM repartition code [2]
* Wed Mar 30 2011 msAATTsuse.de- fixed s390 LVM repartition code
* Wed Mar 30 2011 rootAATTsuse.de- fixed zipl setup if used with LVM images
* Wed Mar 30 2011 msAATTsuse.de- suse 11.4 doesn\'t provide the by-id disk paths anymore. Because of that change kiwi switches to the by-path method with this commit
* Wed Mar 30 2011 adrianAATTsuse.de- do not replace AATT to . in package names when building products
* Wed Mar 30 2011 msAATTsuse.de- fixed xen examples for suse 11.4, xen-tools-domU doesn\'t exist anymore. xen-tools is used instead
* Tue Mar 29 2011 msAATTsuse.de- dont\'t start udev using startproc (bnc #683126)
* Tue Mar 29 2011 msAATTsuse.de- fixed boot path lookup if boot attribute contains an absolute path (bnc #683135)
* Mon Mar 28 2011 msAATTsuse.de- added fixupOverlayFilesOwnership() function which handles all files from the overlay root tree and the image archives. The function changes the ownership of all that files to root:root if they don\'t belong to a user in the passwd file. files which belongs to passwd users are not touched and therefore must be added with the correct owner:group setup in the overlay tree and/or archive
* Mon Mar 28 2011 msAATTsuse.de- fixed perl warning (uninitialized variable) and a checker error when building an ISO image without setting the \'flags\' attribute.
* Fri Mar 25 2011 msAATTsuse.de- v4.83 released
* Fri Mar 25 2011 msAATTsuse.de- option -s for qemu-img convert hast changed its meaning
* Thu Mar 24 2011 msAATTsuse.de- fixed pxeRaidCreate() function. Use --run option when creating the array and write a more reliable mdadm.conf file (bnc #678076)
* Wed Mar 23 2011 msAATTsuse.de- fixed format string of hexdump. If the mbrid has leading zero\'s the hexdump call removes them which leads to an error when string matching the mbrid
* Wed Mar 23 2011 msAATTsuse.de- DB: update documentation, new option --mbrid
* Wed Mar 23 2011 msAATTsuse.de- added support for a custom mbr disk label with the option --mbrid. The default is to create a random mbr disk label.
* Tue Mar 22 2011 msAATTsuse.de- DB: update documentation, new info module \'version\'
* Tue Mar 22 2011 msAATTsuse.de- added info \'version\' selection to obtain the appliance name and version information
* Tue Mar 22 2011 msAATTsuse.de- fixed start of udev and blogd
* Tue Mar 22 2011 msAATTsuse.de- enable loading of agp modules before udev is started (bnc #659843)
* Tue Mar 22 2011 msAATTsuse.de- reverts commit 8f5df54fd23cc6c16e7d72fe5954e62fd70bb458 busybox is distributed with 11.4 (bnc #679660)
* Mon Mar 21 2011 msAATTsuse.de- added suseStripFirmware() which removes all firmware files which are not referenced by any module (bnc #681234)
* Mon Mar 21 2011 msAATTsuse.de- fixed use of uninitialized value in __checkPatternTypeAttrrValueConsistent
* Mon Mar 21 2011 msAATTsuse.de- DB: update documentation, new attribute prefer-license
* Mon Mar 21 2011 msAATTsuse.de- added support for the repository attribute \'prefered-license\' The repository providing this flag will be used to install the license tarball due to request in bnc #633664. If no repo with a prefered license flag exists the search happens over all repos but it\'s not guaranteed in that case that the search order follows the repo order like they are written into the XML description (bnc #680886)
* Mon Mar 21 2011 msAATTsuse.de- DB: update documentation and examples, new element oem-silent-boot
* Mon Mar 21 2011 msAATTsuse.de- added support for the configuration of a silent OEM boot mode Normally the oem boot process switches the splash screen off. With true as part of the oemconfig section, the splash stays on top
* Fri Mar 18 2011 msAATTsuse.de- fixed examples, added boot.local script to the suse-live-stick example which allows to mount the fat boot partition as data container below /media/stickstorage
* Fri Mar 18 2011 msAATTsuse.de- fixed kiwirevision check. In case of a git revision it\'s invalid to check for less than a number. The check must match the revision
* Fri Mar 18 2011 msAATTsuse.de- DB: update documentation, kiwirevision specifies a git commit id
* Fri Mar 18 2011 msAATTsuse.de- v4.82 released
* Fri Mar 18 2011 msAATTsuse.de- fixed exit code handling:
* kiwi --version => exit 0
* kiwi --help | -h => exit 0
* unknown option => exit 1
* no root privileges => exit 1
* processsing error => exit 1
* Fri Mar 18 2011 msAATTsuse.de- move the knowledge about the default package manager from the KIWIManager object into the XML object. This is a configuration value and thus the default should be in the part of the code that processes the configuration
* Fri Mar 18 2011 msAATTsuse.de- added a new target to the Makefile to allow the execution of a single unit test, i.e. support \'make KIWIXMLValidator.t\' This is useful when working on unit tests as it allows to execute only the test being worked on.
* Thu Mar 17 2011 msAATTsuse.de- fixed spec file. perl-satsolver from the 11.4 distro doesn\'t contain the code changes Klaus made during the Studio workshop Therefore kiwi provides the required version now in the Virtualization:Appliances repo for 11.4 (bnc #680549)
* Thu Mar 17 2011 msAATTsuse.de- fixed 11.3 and 11.4 JeOS templates. openssl-certs doesn\'t exist there anymore. I replaced it by ca-certificates
* Thu Mar 17 2011 msAATTsuse.de- increased size of boot partition from 60M to 100M. If mkinitrd is called it might happen that /boot runs out of space
* Wed Mar 16 2011 msAATTsuse.de- The ISO generation code allows for either genisoimage or mkisofs. The checker does not support this. The patch addresses this problem and the checker no will be happy if either genisoimage or mkisofs is found (bnc #680148)
* Wed Mar 16 2011 msAATTsuse.de- fixed typos in ppc boot scripts (spaces at end of line, tab mismatches) and adapt latest noarch code changes from x86 boot scripts to ppc- removed 01-console.sh from ppc JeOS template. That\'s done by the setupConsole() function in suse-preinit
* Wed Mar 16 2011 msAATTsuse.de- fix the VMware image example. The example does not contain necessary packages for a graphical user interface, thus setting window manager and runlevel in config.sh to imply that a GUI environment is present is misleading
* Tue Mar 15 2011 msAATTsuse.de- fixed device map cleanup. The cleanup happened to early because the installBootLoader() code accesses the device map under certain circumstances but the original device was already freed. In that case the installBootLoader() code re-adds the mapping but that could lead to a different device name compared to the one stored in the device mapping table
* Tue Mar 15 2011 msAATTsuse.de- prevent the use of File::Path qw(make_path remove_tree) because it\'s not compatible to File::Path qw(mkpath rmtree) in older perl versions
* Tue Mar 15 2011 msAATTsuse.de- fixed race condition in CD device search, missing udevPending- fixed wrong mountCalled variable setup, the return code of the mount call was not checked. So even if the mount failed the variable was set to \'yes\' which leads to an umount of the root filesystem before the root filesystem was activated
* Tue Mar 15 2011 msAATTsuse.de- removed local sle11 repo assigned to 11.4 net|oemboot boot image description. This was to pull in busybox but I don\'t want sle busybox in 11.4 to avoid compatibility problems (bnc #679659)
* Tue Mar 15 2011 msAATTsuse.de- removed busybox from boot image descriptions for 11.4. It\'s not distributed with the 11.4 media anymore (bnc #679660)
* Tue Mar 15 2011 msAATTsuse.de- added new consistency check to assure that all credentials used with any specified \"https\" repository are the same. Further the consistency check verifies that the username and password attributes are always used together.
* Tue Mar 15 2011 msAATTsuse.de- added support for https repositories for zypper with username and password. Here is an example specification: kiwi now writes a credentials file and takes advantage of the zypper support for this file. This patch also addresses the problem that in the current implementation we end up using the build system zypper configuration file \"zypper.conf\" as zypper is called without the \"--config\" option.
* Tue Mar 15 2011 msAATTsuse.de- DB: update documentation, https support added for zypper
* Mon Mar 14 2011 msAATTsuse.de- fixed the udev trigger call which must only be called one time after the udev daemon has started (bnc #668014)
* Mon Mar 14 2011 msAATTsuse.de- fixed setup of the loader initrd variable. Normally this variable is set via the kernel commandline but in case of a PXE setup it might be missing. In that case we check if the bootloader is present as .profile variable in kiwi_bootloader and set loader appropriately
* Mon Mar 14 2011 msAATTsuse.de- fixed OEM PXE installation code. Wrong function name, checkServer was renamed into pxeCheckServer and the image file in case of a pxe installation is gzip compressed not squashfs embedded
* Mon Mar 14 2011 msAATTsuse.de- DB: update documentation, fixed typos
* Mon Mar 14 2011 msAATTsuse.de- fixed spec file, kiwi-desc-usbboot was dropped
* Mon Mar 14 2011 msAATTsuse.de- added netboot root configuration check. The NFSROOT setup in combination with clicfs is not allowed. It doesn\'t make sense because it requires the clicfs process to run on the NFS server which would allow to connect only one station safely. AOEROOT or NBDROOT should be used in combination with clicfs instead
* Mon Mar 14 2011 msAATTsuse.de- added kernel-firmware package to boot images
* Mon Mar 14 2011 msAATTsuse.de- DB: update documentation, added a section about OEM -> pxe install
* Fri Mar 11 2011 msAATTsuse.de- v4.81 released
* Fri Mar 11 2011 msAATTsuse.de- added function resetBootBind() which turns the bind mounted boot path into a standard distro path which allows kernel updates. resetBootBind() is only called if mkinitrd can be used according to the image root filesystem setup. Along with the resetBootBind change we also had to fix the setup of the fat boot partition if the syslinux bootloader is used. Normally there is a link named boot -> . but on fat we can\'t have links so the data has to be moved. (bnc #678159)
* Fri Mar 11 2011 msAATTsuse.de- adapt recent changes to x86 linuxrc to the s390 code stream
* Fri Mar 11 2011 msAATTsuse.de- fixed typo in motd message of 11.4 JeOS
* Fri Mar 11 2011 msAATTsuse.de- DB: update documentation for ramonly attribute
* Thu Mar 10 2011 msAATTsuse.de- fixed syslinux boot partition setup, links on fat does not exist
* Thu Mar 10 2011 msAATTsuse.de- added optional type attribute ramonly=\"true\" which forces the COW device in a overlay filesystem setup to point to the main RAM memory
* Thu Mar 10 2011 msAATTsuse.de- DB: update schema documentation
* Thu Mar 10 2011 msAATTsuse.de- fixed evaluation of $main::FatStorage. I put it too late in the code so that the overall disk size wasn\'t adjusted
* Thu Mar 10 2011 msAATTsuse.de- removed usbboot boot image and usb image type from kiwi. The obsolete usb image type has been replaced by the hybrid iso image type or by the oem image type.
* Thu Mar 10 2011 msAATTsuse.de- DB: update documentation and removed the suse-live-stick examples.- DB: suse-live-stick are now handled by the hybrid iso examples
* Thu Mar 10 2011 msAATTsuse.de- added more careful grub install check
* Wed Mar 09 2011 msAATTsuse.de- When mounting the hybrid boot drive, select the partition marked as bootable instead of blindly mounting the first one. This change makes it possible to update the system if the image has been written to a writable medium.
* Wed Mar 09 2011 msAATTsuse.de- DB: update documentation, man page update (new options)
* Wed Mar 09 2011 msAATTsuse.de- fixed syslinux boot device setup if LVM is used
* Wed Mar 09 2011 msAATTsuse.de- make the creation of USB sticks more Windows friendly. For a detailed description how this is done watch the bug report: (bnc #677246)
* Tue Mar 08 2011 msAATTsuse.de- fixed spec file for s390 build
* Tue Mar 08 2011 msAATTsuse.de- fixed spec file for ppc build
* Fri Mar 04 2011 msAATTsuse.de- netboot: allow network boot in degraded raid mode (bnc #668014)- netboot: remove superblocks from raid disks if RAID has been dectivated in config. (bnc #668014)
* Fri Mar 04 2011 msAATTsuse.de- added support for the ncpus attribute on the element. It is used to set the number of virtual cpus for a VM and written to .vmx and .xenconfig
* Thu Mar 03 2011 msAATTsuse.de- fixed xsl stylesheet convert47to48.xsl. existing lvmvolumes section wasn\'t translated into systemdisk section
* Thu Mar 03 2011 msAATTsuse.de- added KIWICommandLine and KIWIRuntimeChecker modules. The command line module is a storage container for the commandline options passed to kiwi. It\'s used to transport the data into other objects. One successor of KIWICommandLine is the KIWIRuntimeChecker module which does some checks while kiwi runs. This means kiwi reads in the image description and after that the runtimer checker checks if it is possible to build the desired image according to the specified information. If that tests are passed kiwi enters the actual processing mode which is either the image prepare or create. This is useful to exit early if some option combination or data set is valid according to the XML schema but can\'t be build due to other reasons.
* Thu Mar 03 2011 msAATTsuse.de- update RNG schema ec2region comment
* Thu Mar 03 2011 msAATTsuse.de- added support for the new EC2 Japan region
* Thu Mar 03 2011 msAATTsuse.de- assure that the given memory size given for a Vm is an integer
* Wed Mar 02 2011 msAATTsuse.de- removed python-elementtree package required by smart which was removed in an earlier commit
* Wed Mar 02 2011 msAATTsuse.de- make sure size parameter is used without adding kernel and initrd space if the given size is big enough.
* Wed Mar 02 2011 msAATTsuse.de- removed smart packages- export PBL_SKIP_BOOT_TEST=1 to allow mkinitrd to install- changed SLE10 JeOS example:
* all packages in bootstrap to allow the use of zypper
* remove installiso option which doesn\'t work because no squashfs- added an updated version of parted for SLE10- added a zypper version check for the kiwi upgrade mode- changed all SLE10 boot image descriptions to put packages into the bootstrap section to allow the use of zypper- adapt README of SLE10 JeOS, smart is not required- adapt kiwi.spec to recommend zypper only
* Wed Mar 02 2011 msAATTsuse.de- v4.80 released
* Wed Mar 02 2011 adrianAATTsuse.de- export meta data location content keys for ftp tree medias
* Wed Mar 02 2011 adrianAATTsuse.de- ftp medias beside first one should not provide the product
* Mon Feb 28 2011 msAATTsuse.de- don\'t ignore blocksize value from config. (bnc #675004)
* Fri Feb 25 2011 msAATTsuse.de- added support for --recycle-root option which allows to use and modify an existing root tree while in the kiwi prepare step.
* Fri Feb 25 2011 msAATTsuse.de- v4.79 released
* Fri Feb 25 2011 msAATTsuse.de- The default tftp block size chosen by kiwi is too small and not aligned to page size (4096), so it causes unnecessary overhead. This patch improves loading performance a lot
* Thu Feb 24 2011 adrianAATTsuse.de- just compare the major version of squashfs kernel module and squashfs tools (bnc #674653)
* Thu Feb 24 2011 adrianAATTsuse.de- parse all available product file not just the first one
* Thu Feb 24 2011 msAATTsuse.de- fixed -z test for RELOAD_CONFIG variable in netboot
* Thu Feb 24 2011 msAATTsuse.de- added unit testing for the KIWILocator object
* Thu Feb 24 2011 msAATTsuse.de- added ensconce parameter -i imagename which contains the contents of the name attribute. ensconce requires this to distinguish between system image and initrd image
* Wed Feb 23 2011 msAATTsuse.de- Using here documents with tabs in front of the limit string works but is not recommended. Tabs are ignored when searching for the limit string but spaces are not, in which case the here document ends at the next occurence of the limit string or at the end of the file with some shells not even issuing a warning
* Wed Feb 23 2011 msAATTsuse.de- fixed use of uninitialized value if an improper configuration directory is specified
* Tue Feb 22 2011 msAATTsuse.de- move warning messages about shm and semaphores into logfile
* Tue Feb 22 2011 msAATTsuse.de- v4.78 released
* Tue Feb 22 2011 msAATTsuse.de- added check to enforce the \"no whitespace\" rule for profile names
* Tue Feb 22 2011 msAATTsuse.de- enhanced patternType check which now allows the use of the patternType attribute for all specifications that add packages to the image
* Tue Feb 22 2011 msAATTsuse.de- fixed suse-min-gnome example, empty vmx package section doesn\'t make sense
* Tue Feb 22 2011 msAATTsuse.de- fixed cleanup of shared memory segments and semaphores by a valid destructor in KIWISharedMem.pm
* Tue Feb 22 2011 msAATTsuse.de- fixed regexp in __checkPatternTypeAttrConsistent()
* Tue Feb 22 2011 msAATTsuse.de- fixed locale Makefile, wrong use of equals operator
* Mon Feb 21 2011 msAATTsuse.de- v4.77 released
* Mon Feb 21 2011 msAATTsuse.de- call isohybrid only once according to caller environment
* Mon Feb 21 2011 adrianAATTsuse.de- add optional support for hybrid iso for product medias
* Mon Feb 21 2011 msAATTsuse.de- v4.76 released
* Mon Feb 21 2011 msAATTsuse.de- added support for config-cdroot.tgz and config-cdroot.sh in OEM install media (CD and stick) (bnc #673566)
* Mon Feb 21 2011 msAATTsuse.de- removed obsolete TestSuite check in KIWIURL
* Mon Feb 21 2011 msAATTsuse.de- moved check for ec2-bundle-image after the check for the Amazon AWS credentials
* Sun Feb 20 2011 msAATTsuse.de- setup owner/group permissions only if the user home directory exists (bnc #658172)
* Sun Feb 20 2011 msAATTsuse.de- DB: update documentation for netboot config files update feature
* Sun Feb 20 2011 msAATTsuse.de- added support for netboot config files update. The update happens according to the value of an optional md5sum hash specified per file
* Sat Feb 19 2011 msAATTsuse.de- rebuild rng schema from rnc data
* Sat Feb 19 2011 msAATTsuse.de- cosmetic changes to the unit tests
* fixed the repo specification to point to online repo
* updated the description to indicate what the test does- improve the error message when an undefined profile is referenced- added check for a consistent setting of the patternType attribute value
* Fri Feb 18 2011 msAATTsuse.de- v4.75 released
* Fri Feb 18 2011 msAATTsuse.de- fixed default behavior for oem-swap. If not specified the default should be to create a swap partition. This was accidently changed
* Fri Feb 18 2011 msAATTsuse.de- DB: fixed description about default partitions created
* Fri Feb 18 2011 msAATTsuse.de- allow creation of ec2 format even without credentials. In that case only the adaptions to the root image will be made but the ec2-bundle process will be skipped
* Fri Feb 18 2011 msAATTsuse.de- fixed use of uninitialized value in squashfs version check
* Fri Feb 18 2011 msAATTsuse.de- DB: update documentation according to the pxe raid feature change
* Fri Feb 18 2011 msAATTsuse.de- changed raid 1 support for pxe images. The former implementation can only use raid for the root partition. This implementation allows a custom partition table to be mapped in one raid 1 per partition
* Wed Feb 16 2011 msAATTsuse.de- fixed linuxPartition() to be fine with a raid partition too
* Wed Feb 16 2011 msAATTsuse.de- fixed raid partition setup. The wrong id was set. If there is only one raid partition on the disk fdisk doesn\'t require a number for the \'t\' command
* Wed Feb 16 2011 msAATTsuse.de- DB: update documentation
* Tue Feb 15 2011 msAATTsuse.de- restore copy of temporary files only if they are not provided by the overlay tree. This affects /etc/hosts and /etc/resolv.conf
* Tue Feb 15 2011 msAATTsuse.de- fixed createSnapshotMap() to be able to setup snapshot tables multiple times in a row. this requires unique table names
* Tue Feb 15 2011 msAATTsuse.de- fixed yast2 firstboot startup for old (sle10) init script based startup sequence (bnc #660770)
* Tue Feb 15 2011 msAATTsuse.de- fixed build, unfortunately perl-Test-Unit doesn\'t exist in BS
* Tue Feb 15 2011 msAATTsuse.de- added unit test framework and some XML validation tests
* Tue Feb 15 2011 msAATTsuse.de- fixed typos in XMLValidator output. This is important for the unit test results
* Tue Feb 15 2011 msAATTsuse.de- removed testsuite from kiwi. The current --testsuite mode has been removed because it has turned out that\'s it\'s unused code. With this testsuite it was possible to run scripts inside the kiwi created root tree and check their results. Basically this is only useful for testing the root tree integrity which can always be done outside of kiwi like studio and slepos does. Along with the change we will add unit tests for testing the XML error handling and I plan to integrate an end-to-end testng framework which allows to realy make sure the appliance works as expected
* Mon Feb 14 2011 msAATTsuse.de- fixed location of radeon.ko (typo: missing drivers/)
* Mon Feb 14 2011 msAATTsuse.de- added graphics cards direkt rendering modules for i915, nouveau and radeon for openSUSE 11.4
* Fri Feb 11 2011 msAATTsuse.de- v4.74 released
* Thu Feb 10 2011 msAATTsuse.de- removed split sections from oem examples, use the kiwi default split section for this examples
* Thu Feb 10 2011 msAATTsuse.de- changed the filesystem type to ext3 for 11.2 oem example because we found issues with ext4 on 11.2
* Thu Feb 10 2011 msAATTsuse.de- fixed __addDefaultSplitNode() function. A cloneNode() call is required if you add children from another DOM tree
* Wed Feb 09 2011 msAATTsuse.de- speedup prepare step with caches by skipping the bootstrap installation. If there is a cache available we add the bootstrap packages into the image package section and run the rest of the installation procedure in one image installation step
* Wed Feb 09 2011 msAATTsuse.de- make use of zypper\'s autorefresh feature and don\'t call zypper refresh manually anymore
* Wed Feb 09 2011 adrianAATTsuse.de- offer options to ignore specified but missing packages for product generation
* Wed Feb 09 2011 adrianAATTsuse.de- make a difference between arch modifiers (addarch and removearch) and usage of a package (no modifier). This solves the last problem for openSUSE biarch medias.
* Wed Feb 09 2011 msAATTsuse.de- fixed netboot disk device check. In case of a ramdisk only configuration there is no DISK set but the image download should happen into the ramdisk device. Therefore the disk device check was enhanced to check the ramdisk setup too
* Tue Feb 08 2011 adrianAATTsuse.de- fix arch= statement for real for multi arch medias, use only the subset of global required archs and filtered one by arch= statement
* Tue Feb 08 2011 msAATTsuse.de- moved caching system over from clicfs to a device mapper snapshot table. This seems to be more stable and leaves more room for improvements
* Mon Feb 07 2011 adrianAATTsuse.de- Revert wrong commit overriding package attributes on multi arch medias This reverts commit 1ef1a8b62df61899480285051c9b725990685113.
* Mon Feb 07 2011 adrianAATTsuse.de- avoid error message about undefined $manager variable when building a product
* Mon Feb 07 2011 adrianAATTsuse.deignore missing debug packages, they may not get generated (esp on noarch packages).
* Mon Feb 07 2011 adrianAATTsuse.dehandle autodetected src packages with correct arch (src or nosrc)
* Mon Feb 07 2011 msAATTsuse.de- DB: update documentation and examples due to new ec2region element
* Mon Feb 07 2011 msAATTsuse.de- added support for the child element for . With this a user can specify one or multiple target regions for the EC2 image. Specifying multiple elements creates multiple AMIs. The main convenience is that one does not have to look for the aki-... cryptic name for the PVGrub boot kernel as the value gets embedded in the generated manifest. Supported values are: AP-Singapore, EU-West, US-East, US-West
* Mon Feb 07 2011 adrianAATTsuse.desupport blacklisting of packages via onlyarch=\"\"
* Mon Feb 07 2011 adrianAATTsuse.dereport about all missing packages and abort afterwards, not at the first missing package.
* Mon Feb 07 2011 adrianAATTsuse.detake care about arch= package statement for product required architectures
* Fri Feb 04 2011 msAATTsuse.de- v4.73 released
* Fri Feb 04 2011 msAATTsuse.de- DB: update ec2 documentation
* Fri Feb 04 2011 msAATTsuse.de- fixed typo in ec2 format creation (missing /)
* Thu Feb 03 2011 msAATTsuse.de- fixed ec2 examples
* Thu Feb 03 2011 msAATTsuse.de- DB: update ec2 docs and examples per request in (bnc #667303)
* Thu Feb 03 2011 msAATTsuse.de- improved ec2 format creation per request in (bnc #667303)
* Wed Feb 02 2011 msAATTsuse.de- provide partition info in MB instead of KB
* Tue Feb 01 2011 msAATTsuse.de- update s390 boot code according to generic changes in the x86 boot code
* Tue Feb 01 2011 msAATTsuse.de- added support for ppc images:
* added oemboot boot code
* added vmxboot boot code
* adapt kiwi for creation of ppc disk images
* adapt kiwi for creation of ppc install iso
* added suse-SLE11-JeOS template for ppc
* added support for lilo boot loader used for ppc
* changed spec file to build ppc packages
* Tue Feb 01 2011 msAATTsuse.de- DB: update documentation: Added information about plain:// source- DB: update documentation: Improved smb:// paragraph
* Tue Feb 01 2011 msAATTsuse.de- fixed squashfs version check
* Tue Feb 01 2011 msAATTsuse.de- DB: update documentation, removed wrong version information
* Tue Feb 01 2011 msAATTsuse.de- added support for plain:// url types. They forward the URL (everything following \"plain://\") unmodified to the package manager. This can be used if kiwi does not support a special URL but the package manager does
* Tue Feb 01 2011 msAATTsuse.de- fixed smb mount. Leave // to indicate the share name and make sure we create a unique mount point with mktemp instead of using the share name as base
* Tue Feb 01 2011 msAATTsuse.de- DB: update documentation from review
* Mon Jan 31 2011 msAATTsuse.de- use -o guest option to mount a samba share without username and password specified
* Mon Jan 31 2011 msAATTsuse.de- fixed use of profiled repository sections
* Mon Jan 31 2011 msAATTsuse.de- DB: fixed typo: cifs-utils is required in bootstrap section
* Mon Jan 31 2011 msAATTsuse.de- DB: added documentation about smb:// repo source type
* Mon Jan 31 2011 msAATTsuse.de- added support for username and password in repository elements- enhanced cifs mount (smb://) to be able to use credentials
* Mon Jan 31 2011 adrianAATTsuse.de- Fail hard on missing packages during product build. This is requested with high prio from coolo, we need to make this an option later on.
* Fri Jan 28 2011 msAATTsuse.de- v4.72 released
* Fri Jan 28 2011 msAATTsuse.de- run parted capability checks only if parted exists
* Thu Jan 27 2011 msAATTsuse.de- fixed build for 11.4
* Thu Jan 27 2011 msAATTsuse.de- added filesystem mktool vs. kernel module version check for the squashfs filesystem. The check has been added in the checkType() function
* Thu Jan 27 2011 msAATTsuse.de- add support for smb:// type urls by supporting cifs mount
* Wed Jan 26 2011 msAATTsuse.de- DB: fixed typo
* Wed Jan 26 2011 msAATTsuse.de- DB: added patch from Franz Leitl, fixing some typos
* Wed Jan 26 2011 msAATTsuse.de- added partition ID information into progress information when installing the system in partition install mode
* Wed Jan 26 2011 msAATTsuse.de- fixed lvresize calls in kiwi which are all missing the \'+\' prefix- fixed createSnapshotMap() to know about LVM volumes- fixed partition based installation with LVM image. The dialog for boot and root partition selection was broken and there is also a small fix improving the progress information when installing the image partitions to the disk partitions
* Tue Jan 25 2011 msAATTsuse.de- reverted the following commits: eeecf05d029e7e75abfc44a5c2c600263838c50e 438e83976cbd12dde20511ea5d000620082fa066 They broke the yast autoyast and firstboot setup. The provided config-yast-autoyast.xml or config-yast-firstboot.xml were not handled anymore
* Mon Jan 24 2011 msAATTsuse.de- removed fdisk support entirely except for changing the partition table created by the isohybrid tool. parted can\'t handle that table and therefore we use fdisk inside the function createHybridPersistent() but nowhere else anymore
* Mon Jan 24 2011 msAATTsuse.de- update schema and kiwi documentation
* Mon Jan 24 2011 msAATTsuse.de- fixed mdadm --stop call for pxe raid(1) boot
* Sun Jan 23 2011 msAATTsuse.de- check the return code for the image container mount call
* Fri Jan 21 2011 msAATTsuse.de- v4.71 released
* Fri Jan 21 2011 msAATTsuse.de- fixed partition selection in OEMFindPartitions(). Don\'t take any other than 0x83 partition types into account
* Fri Jan 21 2011 msAATTsuse.de- change the layout of the install ISO / USB stick. The raw disk image on the install media was compressed using gzip. The downside is that it\'s not possible to loop mount the compressed file. But for partition based installations this is required. Therefore the raw disk image is now packed into a squashfs filesystem (bnc #665888)
* Fri Jan 21 2011 msAATTsuse.de- fixed typos in kiwi_oemunattended and kiwi_oemswap evaluation which caused wrong content in the oemconfig file
* Thu Jan 20 2011 msAATTsuse.de- added support for gparted in partition based oem installation If the partition table does not provide the correct layout we start a X session with some descriptive message window and the gparted tool to be able to change the partition table Author: Bernhard M. Wiedemann
* Thu Jan 20 2011 msAATTsuse.defix approx 109 typos
* Thu Jan 20 2011 msAATTsuse.de- added check for $imageDiskDevice and the existence of $imageBootDevice to the setupBootPartition() function in order to prevent unused mount actions for /boot Author: Bernhard M. Wiedemann
* Thu Jan 20 2011 msAATTsuse.defixes from review
* Thu Jan 20 2011 msAATTsuse.de- fixed skip check for firstboot and autoyast descriptions
* Wed Jan 19 2011 msAATTsuse.de- added check which disallows white space in the value for the displayname attribute
* Wed Jan 19 2011 msAATTsuse.de- fixed use of undefined value in KIWIXML.pm validation
* Tue Jan 18 2011 msAATTsuse.de- added support for raid 1 (mirroring) for pxe images
* Tue Jan 18 2011 msAATTsuse.de- fixed insertion of repo alias and priority commandline options into the correct section of the XML description.
* Tue Jan 18 2011 msAATTsuse.de- dont\'t overwrite firstboot.xml or autoconf.xml if they exist as overlay files in the overlay root tree
* Mon Jan 17 2011 msAATTsuse.de- create private __expandFS() function and eliminate some code duplication by this new function
* Mon Jan 17 2011 msAATTsuse.de- added check for the PatternType attribute which may only be used for image and bootstrap packages. Check that this is set appropriately.
* Sat Jan 15 2011 msAATTsuse.de- fixed typo in use of oem-shutdown element
* Fri Jan 14 2011 msAATTsuse.de- fixed evalutation of patternType attribute
* Thu Jan 13 2011 msAATTsuse.de- make sure fixupFDiskSectors() only fixes the first partition start sector and doesn\'t touch the others (bnc #664236)
* Thu Jan 13 2011 msAATTsuse.de- make sure fixupFDiskSectors() is called on a non busy table (bnc #664236)
* Thu Jan 13 2011 msAATTsuse.de- fixed fdisk setup in alignment mode. fdisk is not able to suggest the correct next sector if called with the option \"-u\". Therefore only one partition is created in that mode and the rest is created in fdisk cylinder based mode (bnc #664236)
* Thu Jan 13 2011 msAATTsuse.de- added new module KIWILocator which perform operations to locate objects needed by Kiwi in the filesystem. Along with the new module other code parts which did that before has been replaced
* Thu Jan 13 2011 msAATTsuse.de- added support for satsolver bindings provided with the perl-satsolver package
* Mon Jan 10 2011 msAATTsuse.de- fixed syslinux/isolinux configuration for disk based images. Several problems like missing branding files, write checks in not existing directories and file checks in wrong directories were found
* Mon Jan 10 2011 msAATTsuse.de- fixed syslinux/isolinux config for non graphics boot setup
* Mon Jan 10 2011 msAATTsuse.de- minor clean up, remove match for yes
* Fri Jan 07 2011 msAATTsuse.de- v4.70 released
* Fri Jan 07 2011 msAATTsuse.de- fixed evaluation of kernelcmdline in createImageLiveCD()
* Wed Jan 05 2011 adrianAATTsuse.deMake SUSE meta data compression rsyncable (partly transferable).
* Wed Jan 05 2011 msAATTsuse.de- fixed setupKernelModules() in a way that it doesn\'t overwrite settings from /etc/sysconfig/kernel but append to them
* Tue Jan 04 2011 msAATTsuse.de- revert last commit, broken patch
* Tue Jan 04 2011 msAATTsuse.de- fix sed expression which removes the architecture suffix from the image name. The expression failed if the architecture is also part of the name so it changed to match the suffix at the end of the name string only
* Tue Jan 04 2011 msAATTsuse.de- don\'t call setupConsole twice if systemIntegrity is fine in kiwi netboot code. Also make sure unsetFile(), called on the dhcp info file, is called before the interface is released
* Tue Jan 04 2011 msAATTsuse.de- fixed releaseNetwork() to cleanup /dev/.sysconfig as well as unset the variables from the dhcp info file which has been exported into the root shell environment. Those variables caused conflicts with the network scripts in /etc/init.d
* Tue Jan 04 2011 msAATTsuse.de- removed obsolete config file from suse-11.3/suse-live-stick
* Mon Jan 03 2011 msAATTsuse.de- cleanup netboot code. moved some functions into the KIWILinuxRC.sh pool and fixed bootloader setup when using clicfs images
* Mon Jan 03 2011 msAATTsuse.de- removed old and unmaintained ppc code
* Wed Dec 22 2010 msAATTsuse.de- added check for first sector start after repartitioning via fdisk. The start sector must be the same before and after the repartitioning (bnc #659865)
* Tue Dec 21 2010 msAATTsuse.de- make sure bootincluded packages and archives are not removed by the initrd strip down functions. This is done by introdudcing two new functions in KIWIConfig.sh:
* basePackBootIncludes
* baseUnpackBootIncludes whereas the first one packs the bootinclude files and the second one unpacks them again. The standard boot image descriptions provided by kiwi uses that functions to make sure all bootincluded files can be restored at the end of the strip down functions called in image.sh (bnc #660743)
* Fri Dec 17 2010 msAATTsuse.de- v4.69 released
* Wed Dec 15 2010 msAATTsuse.de- if ensconce is used the pattern/package list is already solved. In that case it doesn\'t make sense to do solving with satsolver again. We are using the list provided by ensconce as solved list directly in that case.
* Wed Dec 15 2010 msAATTsuse.de- fixed ensconce call and parameters:
* ensconce now resides in /usr/bin, so we can call it that way
* pass -b parameter to ensconce, since bootstrap is obsolete
* pass proper root parameter to ensconce
* Wed Dec 15 2010 msAATTsuse.de- fixed profile request handling when kiwi invokes itself
* Wed Dec 15 2010 msAATTsuse.de- fixed functions ignoreRepositories() and addRepository to correctly update the DOM tree and not only the internal hash structures
* Wed Dec 15 2010 msAATTsuse.de- fixed SLE11 template which did not include gfxboot branding packages if xenFlavour was selected
* Mon Dec 13 2010 msAATTsuse.de- fixed warning message when using int() on empty string
* Mon Dec 13 2010 msAATTsuse.de- fixed use of .buildenv
* Fri Dec 10 2010 msAATTsuse.de- renamed modprobe.conf.local to modprobe.d/99-local.conf on systems which doesn\'t support the old conf file anymore
* Fri Dec 10 2010 msAATTsuse.de- v4.68 released
* Thu Dec 09 2010 msAATTsuse.de- fixed location of local modprobe configuration file. The new place is in /etc/modprobe.d/99-local.conf. Only if this doesn\'t exist we will use /etc/modprobe.conf.local
* Wed Dec 08 2010 msAATTsuse.de- make baseSetupInPlaceGITRepository more useful
* Wed Dec 08 2010 msAATTsuse.de- fixed initial value (set it to empty) for INITRD_MODULES
* Wed Dec 08 2010 msAATTsuse.de- removed obsolete setImageType() function from KIWIXML
* Wed Dec 08 2010 msAATTsuse.de- make use of the --check-config modus in kiwi to validate and check the kiwi provided XML configurations within the Makefile.
* Wed Dec 08 2010 msAATTsuse.de- fixed suse-SLE11-JeOS to validate correctly. It\'s not allowed to have multiple import=\"true\" attributes set. Therefore the profile setup for this JeOS XML changed
* Wed Dec 08 2010 msAATTsuse.de- added Option --check-config which validates the XML using the new KIWIXMLValidator module. Along with the new module validation from KIWIXML has been moved into the KIWIXMLValidator object
* Wed Dec 08 2010 msAATTsuse.de- fixed use of createImageUSB() which has changed its name into createImageRootAndBoot()
* Tue Dec 07 2010 msAATTsuse.de- fixed boot partition setup for non mkinitrd supported setups
* Tue Dec 07 2010 msAATTsuse.de- added updateTypeList() function in KIWIXML which is required if an accessor function changes the XML tree the internal data structures needs to be updated too
* Tue Dec 07 2010 msAATTsuse.de- don\'t overwrite the zypp repo data when in recovery mode (bnc #657922)
* Tue Dec 07 2010 msAATTsuse.de- fixed cache creation
* Mon Dec 06 2010 adrianAATTsuse.defix build for factory (openSUSE 11.4)
* Mon Dec 06 2010 msAATTsuse.de- added KIWIXML methods __populateProfiles() and __populateTypeInfo which are gathering the profile and type information as they are set by the XML description. Along with this change the following methodes have changed: __populateDefaultProfiles and __populateProfiledTypeInfo. They both read the data structures created by the first two and assign a new data structure according to the selected profiles.
* Mon Dec 06 2010 msAATTsuse.de- removed unneeded KIWIXML instance from KIWIBoot. The KIWIBoot constructor creates one instance of KIWIXML which is sufficient for all operations
* Mon Dec 06 2010 msAATTsuse.de- fixed parameter list in \'new KIWIXML\' instances
* Sat Dec 04 2010 msAATTsuse.de- fixed repository update in __updateDescriptionFromChangeSet()
* Fri Dec 03 2010 msAATTsuse.de- v4.67 released
* Fri Dec 03 2010 msAATTsuse.de- make addDefaultSplitNode() a private helper method called __addDefaultSplitNode(). Also fixed that function to work correctly. It should add the default split mode for all relevant types (iso and split) and add the section only if those types doesn\'t already implement a split section
* Thu Dec 02 2010 msAATTsuse.de- cleanup KIWIImage and main kiwi code. The global variables ForeignRepo and ImageName has been removed. Additionally the KIWIXML constructor doesn\'t have the ForeignRepo hash in its parameter list. Inside KIWIXML the entire foreign data setup has been changed into methods creating and applying a changeset. Therefore a temporary global hash XMLChangeSet has been introduced. After apply of the changeset it will be removed directly. Along with the cleanup the creation and check for boot and prebuilt images has been moved into functions. The preparation step of kiwi now also writes back the internal XML changes into the XML file. Last but not least the global variable ImageDescription has been introduced which stores in prepare and create mode the path to the base image description which is required to know the location of bootincluded archives and this:// repos
* Wed Dec 01 2010 msAATTsuse.de- removed xml inheritance. This feature was never used
* Tue Nov 30 2010 msAATTsuse.de- restructured XML data processing by adding the following KIWIXML methods: __populateTypeInfo() and __populateImageTypeAndNode() The first method creates the %typeInfo hash which contains all possible elements according to the selected profiles. The second method operates on the %typeInfo hash and initializes those part of the hash which represents the requested image type or the primary type or the first type read in. Both methodes are called only _once_ inside the object constructor. The existing method getImageTypeAndAttributes() has changed to simply return the selected part of the %typeInfo hash and does _not_ change any object data as done before.
* Tue Nov 30 2010 msAATTsuse.de- added check that only one type with image=\"myName\" exists per
* Tue Nov 30 2010 msAATTsuse.de- fixed use of uninitialized value in KIWIXML processing
* Mon Nov 29 2010 msAATTsuse.de- if logfile option is specified along with --init-cache set the logfile to the \'terminal\' mode. That\'s because in that mode multiple logfiles per cache are created and it wouldn\'t make much sense to have them in one file. If the output is on the terminal the user can decide himself for the redirection
* Mon Nov 29 2010 msAATTsuse.de- require clicfs >= 1.3.9 due to major bugs in former versions
* Mon Nov 29 2010 msAATTsuse.de- fixed __checkReferencedProfDefined to work with sections defining more than one profile like netboot does
* Mon Nov 29 2010 msAATTsuse.de- fixed invalid numeric expression in reqProfiles- added __populateDefaultProfiles according to XML restructuring and removed setDefaultProfiles
* Mon Nov 29 2010 msAATTsuse.de- fixed use of uninitialized value in KIWIXML.pm
* Fri Nov 26 2010 msAATTsuse.de- v4.66 released
* Fri Nov 26 2010 msAATTsuse.de- fixed use of undefined value as an ARRAY reference
* Fri Nov 26 2010 msAATTsuse.de- removed unused cleanInitrd() function
* Fri Nov 26 2010 msAATTsuse.de- make sure bootstrap packages are handled when using a cache- fixed time when KIWIImage.pm mounts the overlay and provide a function getImageTree() which returns the currently used root tree. Move the recovery creation, profile update, and cleanup after the KIWIImage module creation
* Fri Nov 26 2010 msAATTsuse.de- fixed overlay setup for KIWIBoot modules. Only if a cow file exists in the given system image path it\'s required to setup the overlay mount
* Fri Nov 26 2010 msAATTsuse.de- don\'t create new kiwi object if there is already one available
* Thu Nov 25 2010 msAATTsuse.de- check image type only if a preferences section is present
* Thu Nov 25 2010 msAATTsuse.de- fixed profile check in create mode
* Thu Nov 25 2010 msAATTsuse.de- cleanup xenconfig setup by removing conditions that no longer apply due to the removal of the xen image type which is now handled by the vmx/oem type flavoured with xen and xenk profiles
* Thu Nov 25 2010 msAATTsuse.de- make sure the package manager is added only once to the list when in --info mode
* Thu Nov 25 2010 msAATTsuse.de- fixed dumpsolv regexp which searches for pattern names
* Thu Nov 25 2010 msAATTsuse.de- fixed creation of boot image caches. It\'s required to prevent the kernel extraction from the cache because this is done in the preparation process which uses the cache- don\'t allow logfile option when in init-cache mode. This is because each cache has its own logfile living in the cache directory
* Thu Nov 25 2010 msAATTsuse.de- fixed minor code duplication inside the RNC schema
* Thu Nov 25 2010 msAATTsuse.de- deactivate compression for clicfs caches (faster)- fixed and cleaned up profile evaluation and use
* Thu Nov 25 2010 adrianAATTsuse.demake \"mk_listings\" call during product generation optional
* Thu Nov 25 2010 msAATTsuse.de- explicitly call SuSEconfig --module permissions. This module is no longer called by the default SuSEconfig call so we need to call it directly
* Wed Nov 24 2010 msAATTsuse.de- added the following consistency checks:
* only 1 profile may be marked as default via import=\"true\"
* only 1 type per spec may be set as default via primary=\"true\"
* only 1 spec may reference 1
* only 1 specification without a profiles=... attribute
* check that all references used via profiles=\"aName\" attribute have a definition of
* Wed Nov 24 2010 msAATTsuse.de- require specific clicfs version because the version before has severe problems when writing to a cow file
* Tue Nov 23 2010 msAATTsuse.de- don\'t preserve rpm database on recovery. This could cause an inconsistent rpm database. Not preserving it could cause an incomplete but consistent database which is better. For reference a copy of the old database is stored in /var/lib/rpm.backup
* Mon Nov 22 2010 msAATTsuse.de- follow up: make sure system filesystems and mount options corresponds with the default settings we use in a standard installation with yast
* Mon Nov 22 2010 msAATTsuse.de- fixed cleanImage() function to cleanly umount partitions before calling init. Also make sure cleanImage reports its actions as part of the boot.kiwi logfile- make sure system filesystems and mount options corresponds with the default settings we use in a standard installation with yast
* Mon Nov 22 2010 msAATTsuse.de- fixed typo in option description
* Fri Nov 19 2010 msAATTsuse.de- v4.65 released
* rebuild documentation
* rebuild schema documentation
* Fri Nov 19 2010 msAATTsuse.de- added an oem hook named: preCallInit which runs right before init is called or in case of a reboot/halt request right before that reboot (bnc #654404)
* Fri Nov 19 2010 msAATTsuse.de- make sure /dev is bind mounted when installing the very first bootstrap packages.
* Thu Nov 18 2010 msAATTsuse.de- DB: update documentation
* Wed Nov 17 2010 msAATTsuse.de- put package manager into solver list when calling kiwi --select ... --info packages- fixed clicfs mount in cache mount code:
* we don\'t want reserved blocks
* we don\'t want automatic filesystem check
* we don\'t want to use --ignore-cow-errors- deactivate automatic cache creation and introduce a new operation mode called kiwi --init-cache. Caches needs to be created in a separate call. This has turned out to be more flexible and prevent customer confusion- add default cache image location: /var/cache/kiwi/image which can be overwritten by the --cache option. If one want to use caches in prepare or create mode it\'s required to select the cache location with this option.- removed baseroot attribute and defaultbaseroot element from XML description. baseroot has been replaced by the clicfs based caching process- don\'t leave .broken inside the tree if it is not broken- cleanup the overlay preparation code. The code is in KIWIOverlay.pm exclusively. At each code point which requires it we create a KIWIOverlay object and let it control the overlay mount
* Wed Nov 17 2010 msAATTsuse.de- DB: add documentation about PXE hardware maps
* Wed Nov 17 2010 msAATTsuse.de- update documentation for oem-unattended mode
* Wed Nov 17 2010 msAATTsuse.de- if in oem-unattended mode and we found more than one disk for installation, use the first disk found by hwinfo
* Wed Nov 17 2010 msAATTsuse.de- fix bug in the format conversion from raw to qcow2. The \'convert\' command to qemu-mig was missing.
* Wed Nov 17 2010 msAATTsuse.de- move the two consistency checks (kiwirevision and version format) out of the KIWIXML constructor and into their own methods- Implement a new consistency check, __checkFilesysSpec(). This method assures that the \'filesystem\' attribute is used for image types that require the attribute
* Tue Nov 16 2010 msAATTsuse.de- fixed creation and use of kiwi caches for boot images also make sure the same clicfs cache is mounted only once and is released in case of an exception
* Tue Nov 16 2010 msAATTsuse.de- netboot: fixed incorporation of hardware maps- netboot: evaluate additional VENDOR_CONF value
* Tue Nov 16 2010 msAATTsuse.de- fixed use of uninitialized variable AATTconfigNodes- fixed solvable setup for susetags
* Tue Nov 16 2010 msAATTsuse.de- update RNG schema due to last change to the RNC schema
* Tue Nov 16 2010 msAATTsuse.de- added new element text which allows the user to specify raw text that ends up in the .vmx or .xenconfig file. Certain default options currently written by Kiwi may be over written by these settings. Therefore the use of this option happens on your own risk. No validation of the raw text is performed.
* Mon Nov 15 2010 msAATTsuse.de- verify format used for the mac address when specifying the attribute on the vmnic element.
* Mon Nov 15 2010 msAATTsuse.de- fixed logging for listXMLInfo()
* Mon Nov 15 2010 msAATTsuse.de- move the XML validation and loading to it\'s own methods- added image consistency checks into KIWIXML as addition to the XSLT stylesheet processor. The function __validateConsistency provides a place to add consistency checks:
* Added check: __checkPostDumpAction which ensures that only one of oem-bootwait, oem-reboot, oem-reboot-interactive, oem-shutdown or oem-shutdown-interactive is specified.
* Mon Nov 15 2010 msAATTsuse.de- added return string to partitionSize() function even in case of error
* Mon Nov 15 2010 msAATTsuse.de- added bc tool to netboot image descriptions
* Thu Nov 11 2010 msAATTsuse.de- allow boottimeout setup for image=\"iso\" too
* Wed Nov 10 2010 msAATTsuse.de- added xsl stylesheet to convert images which uses the image=\"xen\" type into an appropriate image=\"vmx\" type because the xen image type was removed. Additionally increased schema version to v5.0 with this change
* Tue Nov 09 2010 msAATTsuse.de- netboot: added support for hardware maps. Hardware maps are configuration files for a given range of MAC addresses. If a client of the specified range boots up the corresponding hardware map file will be loaded and merged with the default configuration. That way you can specify in one config file configurations dedicated to different machines. Example config. ... HARDWARE_MAP=\"vendor1, vendor2, vendor3\" vendor1_HARDWARE_MAP=\"xx:xx:xx:xx:xx:x1, xx:xx:xx:xx:xx:x2\" ... if client xx:xx:xx:xx:xx:x1 boots up the file hardware_config.vendor1 is additionally loaded from the pxe boot server
* Mon Nov 08 2010 msAATTsuse.de- fixed doit OBS script to work with branch names different from \'kiwi\'
* Mon Nov 08 2010 msAATTsuse.de- more flexible post dump behavior:
* Fix misnomer of oem-dumphalt, now called oem-bootwait xslt included, no change in functionality from oem-dumphalt
* Add oem-reboot-interactive post a message before rebooting the system after image expansion wait for user interaction
* Add oem-shutdown power the system off after dump and image expansion are complete
* Add oem-shutdown-interactive post a message before system power off, wait for user interaction
* Sun Nov 07 2010 msAATTsuse.de- word-smithing for images.sh and config.sh doc
* Fri Nov 05 2010 msAATTsuse.de- v4.64 released- rebuild documentation- rebuild schema documentation
* Fri Nov 05 2010 msAATTsuse.de- added a command line argument to sepecify the default \'yes\' answer for questions which could come up during the build process
* Fri Nov 05 2010 msAATTsuse.de- changed partition layout of LVM based vmx/oem images. The boot partition is now the first partition and we will use only one partition for the entire LVM as second partition (bnc #651331)
* Fri Nov 05 2010 msAATTsuse.de- fixed compare statement, in perl \'eq\' for strings must be used
* Thu Nov 04 2010 msAATTsuse.de- fixed rpmlint warning: kiwi.src:434: W: macro-in-comment %config
* Thu Nov 04 2010 msAATTsuse.de- added 11.4 JeOS to spec file
* Thu Nov 04 2010 msAATTsuse.de- added templates and boot image descriptions for SuSE 11.4- removed doc/examples/suse-11.1
* Thu Nov 04 2010 msAATTsuse.de- fixed format conversion checks. iso type can\'t be converted
* Thu Nov 04 2010 msAATTsuse.de- fixed checkLVMbind() function to activate volume groups before checking the device mapper nodes
* Wed Nov 03 2010 msAATTsuse.de- fixed check for xvc/hvc consoles (bnc #650667)
* Tue Nov 02 2010 msAATTsuse.de- keeping old boot files in /boot and trying to copy in newly generated initrd + kernel during image startup could result in not enough space on /boot partition for LVM enabled builds. This patch fixes that by removing the old kernel + initrd, before copying in the new one.
* Tue Nov 02 2010 msAATTsuse.de- added languages nb_NO,da_DK,pt_PT and en_GB to the selection list
* Tue Nov 02 2010 msAATTsuse.de- support multiple vmnic elements for VMware
* Mon Nov 01 2010 msAATTsuse.de- added support for the XFS filesystem
* Mon Nov 01 2010 msAATTsuse.de- fixed the schema inplace dochint for the oem-dumphalt element- rebuild documentation
* Mon Nov 01 2010 msAATTsuse.de- don\'t let the recovery partition grow to the rest disk space available. This is not intended as the recovery partition should only be of the min size required to store the recovery data
* Fri Oct 15 2010 msAATTsuse.de- v4.63 released- rebuild documentation- rebuild schema documentation
* Fri Oct 15 2010 msAATTsuse.de- fixed repartition code, out of bounds partitioning
* Thu Oct 14 2010 msAATTsuse.de- added setupConsole() function to activate xvc and/or hvc consoles if their device nodes are present
* Wed Oct 13 2010 msAATTsuse.de- fixed xenconfig creation, virtual framebuffer line wasn\'t written
* Wed Oct 13 2010 msAATTsuse.de- fixed suse-11.3/suse-xen-guest example by removing some old static sysconfig files. Also remove the boot.xen service script it\'s no longer required as we can use the xvc device for the console
* Wed Oct 13 2010 msAATTsuse.de- added support for targetdevice option for filesystem images- if the targetdevice option is used check if the device exists before proceeding
* Tue Oct 12 2010 msAATTsuse.de- make sure volume is active again if no LVM repartition takes place. This is because recreateVTOCTable has deactivated the volume group before
* Tue Oct 12 2010 rootAATTsuse.de- fixed LVM based repartition code for s390 and DASD, it\'s required to recreate the VTOC table here before you can create new partitions
* Tue Oct 12 2010 msAATTsuse.de- fixed creation of VTOC table; close active device maps first
* Mon Oct 11 2010 msAATTsuse.de- fixed spec file requirements, grub and clicfs only exists on ix86 and x86_64
* Mon Oct 11 2010 msAATTsuse.de- fixed use of satsolver if ensconce is used together with pattern names. ensonce uses an already resolved manifest file and thus it\'s not required to solve the patterns via satsolver (bnc #643442)
* Mon Oct 11 2010 msAATTsuse.de- changed the lvmvolumes section into systemdisk like the following example shows: ... - update to new schema version 4.8 due to the systemdisk change- if systemdisk is specified a lvm setup is implicitly requested. Therefore also the attribute \'lvm\' from the type section was removed- Also the oem-home element was removed with this change. A volume instead of a single partition should be used.- wrote a xslt stylesheet for the following conversions:
* remove lvm attribute
* move lvmvolumes element into systemdisk
* move lvmgroup attribute into name
* if oem-home is set create a systemdisk setup with a home volume- update documentation due to the systemdisk change
* Fri Oct 08 2010 msAATTsuse.de- v4.62 released- rebuild documentation
* Thu Oct 07 2010 msAATTsuse.de- added vfb (virtual framebuffer configuration) to the xenconfig file written by kiwi. This allows easy graphics console access with the virt-viewer program. If you want to run the xen domU in text mode you have to manually pass the option xencons=tty in the pygrub boot menu
* Thu Oct 07 2010 msAATTsuse.de- added egrep for dasd_configure to initrd- fixed the creation of the boot partition if a real targetdevice is used to prevent using the entire rest space for the boot image
* Thu Oct 07 2010 rootAATTsuse.de- fixed boot device detection for zipl on dasd devices with LVM
* Thu Oct 07 2010 msAATTsuse.de- removed xencons boot option for domU creation in .xenconfig and from the bootloader kernel options (bnc #644138)
* Thu Oct 07 2010 msAATTsuse.de- update and rebuild documentation
* Thu Oct 07 2010 msAATTsuse.de- added support for setting up the boottimeout value prior to the default value in the config.xml section. the unit for the timeout value is seconds if grub is used as the boot loader and 1/10 seconds if syslinux is used ...
* Thu Oct 07 2010 msAATTsuse.de- fixed fdasd input creation, wrong \'t\' command setup
* Thu Oct 07 2010 msAATTsuse.de- call udevPending before checking /sys/bus/usb/devices
* Mon Oct 04 2010 msAATTsuse.de- DB: Deleted kiwi-doc-intro.xml and moved content to kiwi-doc-workflow.xml- DB: Removed xinclude of kiwi-doc-intro.xml from kiwi-doc.xml
* Fri Oct 01 2010 msAATTsuse.de- v4.61 released- rebuild documentation
* Fri Oct 01 2010 msAATTsuse.de- fixed creation of install CD if syslinux is used.- fixed syslinux dosfs boot partition setup by adding the dosfstools package to the oemboot image descriptions
* Thu Sep 30 2010 msAATTsuse.de- fixed OEMRepartStandard(). Additionally to the last commit, fixed the use of the suggested last cylinder for swap and recovery only if no oem-systemsize is set
* Thu Sep 30 2010 msAATTsuse.de- fixed OEMRepartStandard() to use the suggested last cylinder for the last partition to become created instead of a fixed value. Also use the suggested last cylinder for the resize of the root partition if there is no other partition to become created and no oem-systemsize was specified
* Wed Sep 29 2010 rootAATTsuse.de- fixed boot device detection for s390 KVM target
* Mon Sep 27 2010 msAATTsuse.de- fixed typo in DHCPCD option test
* Mon Sep 27 2010 msAATTsuse.de- added support for partition alignment with fdisk. Thus support for 4k-sector size disks (logical 512 byte) with fdisk was added when using parted the -align option is used in any case though. In order to use the alignment when fdisk is used the oemconfig element oem-align-partition must be set to \'true\' (bnc #637333)
* Thu Sep 16 2010 msAATTsuse.de- v4.60 released- rebuild documentation
* Thu Sep 16 2010 msAATTsuse.de- removed umount -a call to prevent a read-only remount (bnc #635159)
* Thu Sep 16 2010 msAATTsuse.de- fixed searchGroupHardwareAddress() parameter list. mac_list must be a quoted string otherwise only the first entry is evaluated
* Wed Sep 15 2010 msAATTsuse.de- use $main::Gzip for compressing the recovery tarball
* Wed Sep 15 2010 msAATTsuse.de- moved hooks directory to kiwi-hooks- added and documented new hooks for oemboot preHWdetect,preImageDump,postImageDump
* Wed Sep 15 2010 msAATTsuse.de- DB: Fixed typo in xsl:import: instead xsl-ns it should be xsl in the URI- DB: Added option --nonet for xmllint and xsltproc to avoid opening a network connection (should be done through XML catalogs)
* Tue Sep 14 2010 msAATTsuse.de- fixed foreign lvm attribute setup, a value must be set- fixed setForeignTypeAttribute() to display the attribute value
* Tue Sep 14 2010 rootAATTsuse.de- added support for s390 DASD repartitioning
* Tue Sep 14 2010 msAATTsuse.de- added \'rt\' kernel-rt profile for isoboot, netboot, usbboot and vmxboot too (bnc #639217)
* Tue Sep 14 2010 msAATTsuse.de- DB: rebuild documentation- DB: Enhanced manpages with more tags, unified spelling of KIWI, splitted para in separate paragraphs- DB: fixed callout lists for PDF creation
* Tue Sep 14 2010 msAATTsuse.de- DB: added callout lists below pictures
* Tue Sep 14 2010 msAATTsuse.de- fixed --bootstick creation. Don\'t dump an image file when writing to the stick. Fixed image type setup when usbboot is used
* Mon Sep 13 2010 msAATTsuse.de- According to the documentation [1], parted uses SI prefixes when reporting sizes. Cylinder size is thus reported in 1000 Bytes, not 1024 Bytes. This caused partitions which were created using cylinder offsets to have a wrong size. This patch fixes that by correcting constants in offset calculation. It also removes the magic multiplication constant used when creating LVM volumes.
* Mon Sep 13 2010 msAATTsuse.de- DB: added callout graphics
* Mon Sep 13 2010 msAATTsuse.de- DB: fixed figure callout lists
* Mon Sep 13 2010 msAATTsuse.de- DB: changed figure text type to Helvetica
* Mon Sep 13 2010 msAATTsuse.de- DB: changed figures to use call-out list items
* Fri Sep 10 2010 msAATTsuse.de- fixed check for fdasd partitioner
* Fri Sep 10 2010 msAATTsuse.de- added \'rt\' profile for oemboot pointing to kernel-rt (bnc #638512)
* Fri Sep 10 2010 msAATTsuse.de- DB: added doc hint about the use of multiple DVD\'s
* Fri Sep 10 2010 msAATTsuse.de- fixed disk increase per LVM volume (bnc #587361)
* Fri Sep 10 2010 msAATTsuse.de- v4.59 released
* Fri Sep 10 2010 msAATTsuse.de- DB: fixed Makefile to update Revision.txt from spec file version
* Fri Sep 10 2010 msAATTsuse.de- DB: Added s > ... and similar entries
* Thu Sep 09 2010 msAATTsuse.de- allow the qeth parameters to be set via the kernel commandline too for the s390/suse-SLE11-JeOS image. Detailed information about kernel parameters for this image can be found in the s390/suse-SLE11-JeOS/README
* Thu Sep 09 2010 msAATTsuse.de- fixed mount() function to work with disk files too
* Thu Sep 09 2010 msAATTsuse.de- if the --targetdevice option is set, create the image file by dumping bytes from the targetdevice. Also make sure the free space of the filesystem on the targetdevice is filled with zero bytes to gain a better compression result of the image file. --targetdevice is currently used for s390 DASD devices
* Thu Sep 09 2010 msAATTsuse.de- fixed suseSetupProduct looking for a SUSE_ prefix too (bnc #637996)
* Thu Sep 09 2010 msAATTsuse.de- rebuild documentation
* Thu Sep 09 2010 msAATTsuse.de-DB: pxe: fixed some spelling and gramatical errors-DB: Enabled mini tocs for chapters and appendices-DB: Chapter and appendix titles are in the format \"Number Title\" now-DB: Removed \"Appendix\" from kiwi-doc-appendix.xml-DB: Added more comments in fo/docbook.xsl
* Wed Sep 08 2010 msAATTsuse.de- fixed qeth setup in s390 template
* Wed Sep 08 2010 msAATTsuse.de- rebuild documentation
* Wed Sep 08 2010 msAATTsuse.de- DB: Reduced size of description.png image- DB: Converted informaltable to table, added xref- DB: Improved toc: Make chapters and appendices bold- DB: Activated numbering of sections- DB: Make s title consistent with HTML
* Wed Sep 08 2010 msAATTsuse.de- removed unused root.tar.gz files in JeOS descriptions- added dasd_configure and qeth_configure to initrd- fixed check for kiwi_lvm variable- added functions isVirtioDevice and isDASDDevice to check for these devices.- added runPreinitServices to call scripts in /etc/init.d/kiwi/$service/
*.sh- adapt s390 JeOS template to use preinit service scripts. This system should can be used to setup the hvc console for kvm as well as the network setup on a s390 guest system
* Tue Sep 07 2010 msAATTsuse.de- moved documentation from LaTeX to DocBook, PDF and HTML provided
* Tue Sep 07 2010 rootAATTsuse.de- fixed s390 support for DASD devices. The main problem here is the detection of the disk. kiwi stores the busid value from the disk it used to create the image on in the kernel cmdline. We also had to add a function which set this disk online before we can access it via the device node
* Tue Sep 07 2010 rootAATTsuse.de- added hint about hvc console usage in README of s390 JeOS template
* Tue Sep 07 2010 msAATTsuse.de- fixed fdasd input to use partition id=1 if LVM=8e was requested
* Tue Sep 07 2010 msAATTsuse.de- pxe: added support for non-contiguous MAC/IP grouping (bnc #636692)- pxe: added documentation for MAC/IP grouping
* Tue Sep 07 2010 msAATTsuse.de- fixed s390 vmxboot and oemboot boot images to contain the drivers/s390 kernel modules which are required for DASD and other s390 specific devices
* Tue Sep 07 2010 msAATTsuse.de- DB: added make check target to docbook Makefile
* Mon Sep 06 2010 rootAATTsuse.de- added support for fdasd partitionier- fixed installation of zipl.conf when writing into real device
* Mon Sep 06 2010 msAATTsuse.de- allow the kernelCheck function to reboot via kexec (bnc #636406)
* Mon Sep 06 2010 msAATTsuse.de- DB: added missing dashes, resp. replaced with correct option dashes- DB: added set monospace.properties attribute for fo creation- DB: added common table id\'s
* Fri Sep 03 2010 msAATTsuse.de- DB: added fop configuration for PDF font setup
* Fri Sep 03 2010 msAATTsuse.de- allow boot disk creation to work from real devices too
* setupBootDisk(),setupInstallCD and setupInstallStick() can operate on real disk devices too
* changed setupBootStick to call setupBootDisk with the selected stick device as parameter
* added a destructor function in KIWIBoot to cleanup all created tmp directories after the object is no longer in use. Prevent all clean
* function to remove and tmp dir
* cleanup KIWIBoot: removed cleanTmp function
* cleanup KIWIBoot: moved kpartx calls into function
* cleanup KIWIBoot: moved stick search into function
* cleanup KIWIBoot: added checkLVMbind function
* Fri Sep 03 2010 msAATTsuse.de- DB: added ref counter for pictures
* Fri Sep 03 2010 msAATTsuse.de- DB: added IDs for all sect{1,2,3}, procedures, tables and figures
* Fri Sep 03 2010 msAATTsuse.de- DB: added \'man\' target to create man pages
* Fri Sep 03 2010 msAATTsuse.de- DB: changed all : options from -bob to --bob- DB: added new stylesheet for html: xslt/html/docbook.xsl- DB: adapt Makefile according to new stylesheet- DB: update CSS from Andy- DB: fixed kiwi-man-
*.xml: added id-Attribut, common name kiwi,Kiwi -> KIWI used, added s for filenames
* Thu Sep 02 2010 msAATTsuse.de- DB: fixed some commandline parameter dashes- DB: added title page for PDF
* Thu Sep 02 2010 msAATTsuse.de- DB: fixed man page template titles- DB: fixed Makefile, add kiwi-doc.xml to source files- DB: enabled index page creation
* Thu Sep 02 2010 msAATTsuse.de- DB: update documentation, pictures and the DocBook README file
* Thu Sep 02 2010 msAATTsuse.de- DB: fixed creation of picture files
* Thu Sep 02 2010 msAATTsuse.de- use $SERVER server ip for NFS or NBD root server if not specified in NBDROOT/NFSROOT
* Thu Sep 02 2010 msAATTsuse.de- added check for dhcpcd options. On sle10 we don\'t have the options -p or --noipv4ll
* Thu Sep 02 2010 msAATTsuse.de- DB: added index page to docbook source- DB: fixed Makefile for building book
* Wed Sep 01 2010 msAATTsuse.de- better Makefile for docbook book creation. Added pictures which are currently embedded as PNG\'s. This needs to be improved though
* Wed Sep 01 2010 msAATTsuse.de- started conversion of the documentation from LaTeX to DocBook. This first version is still missing a few things, therefore the LaTeX source is still in place and preferred
* Tue Aug 31 2010 msAATTsuse.de- make sure the lvm attribute is part of the .profile environment of the kiwi boot images. The value is exported as $kiwi_lvm. The searchVolumeGroup() function only operates if kiwi_lvm is set to true- moved the message text \'Searching for $VGROUP volume group\' into the searchVolumeGroup() function and remove it from all boot image linuxrc\'s
* Tue Aug 31 2010 msAATTsuse.de- LVM: added 1% spare space for each volume to store the metadata
* Mon Aug 30 2010 msAATTsuse.de- prevent dd output on stderr when checking the boot sector
* Mon Aug 30 2010 msAATTsuse.de- fixed check for boot sector inclusion
* Mon Aug 30 2010 msAATTsuse.de- update documentation
* Mon Aug 30 2010 msAATTsuse.de- copy license files into the system if found on one of the specified repos. The first repo which provides a license.tar.gz is the one which is used (bnc #633664)
* Mon Aug 30 2010 msAATTsuse.de- added sync call before umounting the filesystems. Reasons for this workaround is the kernel problem in (bnc #15906)
* Fri Aug 27 2010 msAATTsuse.de- don\'t call the grub binary from the image this could lead to problems when the grub binary is linked against a library which doesn\'t exist on the build machine. Therefore we use the grub binary installed on the build machine (kiwi requires grub for vmx and oem now) and bind mount the grub stage files in boot/grub from the image to the build machine while grub is called
* Fri Aug 27 2010 msAATTsuse.de- v4.58 released
* Fri Aug 27 2010 msAATTsuse.de- make use of the mkfs.$FS toolset instead of mk2fs with parameters This is more compatible and also prevents us from dealing with the changed meanings of some mk2fs parameters (bnc #635052)
* Thu Aug 26 2010 msAATTsuse.de- fixed convert39to41.xsl to insert xenconfig and vmwareconfig sections also for iso image type
* Thu Aug 26 2010 msAATTsuse.de- added parted as requirement for kiwi-desc-oem|vmxboot
* Wed Aug 25 2010 msAATTsuse.de- fixed yum package check. the \'list available\' command is not suitable for already installed packages. Therefore we use \'list all\' which also works for already installed packages
* Wed Aug 25 2010 msAATTsuse.de- changed iso image type for RHEL template to use clicfs instead of squashfs
* Wed Aug 25 2010 msAATTsuse.de- added clicfs for RHEL 5.4 to kiwi rhel repo
* Wed Aug 25 2010 msAATTsuse.de- fixed clicfs mount by not using losetup on the clicfs file before mounting it via the clicfs command. The clicfs command now get the clicfs file directly. Problem here was that with a loop clicfs is no longer able to read the size of the clicfs file which results in unexpected behavior (bnc #629543)- Related to that fix clicfs based caching now works stable
* Wed Aug 25 2010 msAATTsuse.de- call dhcpcd with the option --noipv4ll to be able to check the return code of dhcpcd and to prevent the interface from an ip address if there was a DHCP timeout (bnc #634057)
* Wed Aug 25 2010 msAATTsuse.de- added package/group check before yum is called to install packages/groups. This is done because there are yum versions which silently ignore missing items and proceed installing the rest.
* Tue Aug 24 2010 msAATTsuse.de- fixed message about package installation when using ensconce The problem was that it prints always the same message about installing bootstrap packages even in non-chroot mode
* Tue Aug 24 2010 msAATTsuse.de- don\'t check the return code of dhcpcd it\'s always zero. Therefore the check has been changed to check for the creation of the /var/lib/dhcpcd/dhcpcd-$PXE_IFACE.info file (bnc #634057)
* Mon Aug 23 2010 msAATTsuse.de- added setup to templates. Use utc by default
* Mon Aug 23 2010 msAATTsuse.de- allow setup of HWCLOCK in /etc/sysconfig/clock via the preferences element utc|localtime
* Mon Aug 23 2010 msAATTsuse.de- RHEL: fixed URL quoting when building with yum- RHEL: added alternative search path for isolinux.bin
* Mon Aug 23 2010 msAATTsuse.de- v4.57 released
* Fri Aug 20 2010 msAATTsuse.de- fixed etc/motd for suse-11.3-JeOS. It was still saying this is a 11.2 system, cut&paste bug :-)
* Fri Aug 20 2010 msAATTsuse.de- fixed suse-11.3/suse-min-gnome. Gnome is not working no session and desktop information was installed
* Fri Aug 20 2010 msAATTsuse.de- don\'t use mkclicfs from image root tree. That will fail in any case where the image buildsystem libraries doesn\'t match the ones required by the mkclicfs binary inside the root tree
* Fri Aug 20 2010 msAATTsuse.de- fixed suse-11.3/suse-min-gnome example. Some X11 packages where missing in order to boot up with a working X
* Wed Aug 18 2010 msAATTsuse.de- fixed convert39to41.xsl schema conversion. The attributes for the conversion from to were missing
* Wed Aug 18 2010 msAATTsuse.de- fixed shell exception handling after the move mount of devices. In that cases the tty devices are in /mnt/dev and therefore any shell exception failed because the setctsid call can\'t find the device. This is now fixed (bnc #608620)
* Wed Aug 18 2010 msAATTsuse.de- fixed netboot building by providing atftp for SLE11 (bnc #632203)
* Tue Aug 17 2010 msAATTsuse.de- update schema documentation
* Tue Aug 17 2010 msAATTsuse.de- added support for selecting the default boot entry for a kiwi install image. The optional attribute called installboot can take the values \'install\' for standard installation, \'failsafe-install\' for installation with failsafe kernel parameters and \'harddisk\' which is the default anyway if no installboot attribute was given (bnc #624228)
* Tue Aug 17 2010 msAATTsuse.de- update documentation. XML elements and attributes are now listed in the index
* Tue Aug 17 2010 msAATTsuse.de- update documentation. Better index page
* Tue Aug 17 2010 msAATTsuse.de- update documentation
* Mon Aug 16 2010 msAATTsuse.de- removed unused variable $device in mountSystem()
* Mon Aug 16 2010 msAATTsuse.de- put the code which deactivates the filesystem check by resetting the mount counter into a function called resetMountCounter(). Let resetMountCounter also check the filesystem type to be able to distinguish different filesystem tools (bnc #627021)
* Fri Aug 13 2010 msAATTsuse.de- update documentation, fixed Makefile and changed box frame layout into two horizintal lines
* Fri Aug 13 2010 msAATTsuse.de- update documentation. Some style changes for code boxes which now allows also cut&paste
* Fri Aug 13 2010 msAATTsuse.de- disable filesystem check for kiwi managed partitions using tune2fs -c -1 -i 0 $device (bnc #627021)
* Wed Aug 11 2010 msAATTsuse.de- v4.56 released
* Wed Aug 11 2010 msAATTsuse.de- fixed permissions and ownership setup of read-write part in split images. The problem here was that the read-write part is created as new directory structure belonging to root. Therefore it\'s required to update permissions and ownership from the original tree afterwards in the same as it\'s done for the read-only and temporary parts
* Tue Aug 10 2010 msAATTsuse.de- make use of the --recursive feature of insserv and remove my own recursice insserv implementation which has to parse the insserv output and therefore always fail if that output changes (bnc #627480)
* Tue Aug 10 2010 msAATTsuse.de- added acpi modules to kiwi\'s oemboot initrd. This is required mostly for fan control on laptops and therefore very important for the preload images running on laptops to prevent overheating of the devices
* Tue Aug 10 2010 msAATTsuse.de- fixed hybrid persistent feature. The check for the bios protection was broken which caused the creation of the persistent write partition to be skipped.- added support for the kernel option wipecow=1. This option allows to wipe an eventually existing cow file on a hybrid iso image to start from scratch
* Tue Aug 10 2010 msAATTsuse.de- changed suse-11.3/suse-live-stick example to use the hybrid iso technology
* Tue Aug 10 2010 msAATTsuse.de- fixed coding style for driverupdate support in inst-sys mode also fixed DB comments in schema for driverupdate section
* Tue Aug 10 2010 msAATTsuse.de- update documentation and man pages. some formal and consistency changes over the entire document
* Mon Aug 09 2010 msAATTsuse.de- update documentation. Thanks to Thomas Schraitle
* Mon Aug 09 2010 msAATTsuse.de- pxe: make sure the CONF contents are evaluated even if the image is downloaded to RAM only instead of a persistent device.
* Mon Aug 09 2010 msAATTsuse.de- added missing xml object reference to foreign repo hash when building a split image
* Mon Aug 09 2010 msAATTsuse.de- setup overlay mount method in create mode if the file $Create/kiwi-root.cache exists
* Mon Aug 09 2010 msAATTsuse.de- update documentation. Thanks to Thomas for providing the patch
* Fri Aug 06 2010 msAATTsuse.de- v4.55 released
* Fri Aug 06 2010 msAATTsuse.de- fixed typo in config.xml search in overlay mount function
* Fri Aug 06 2010 msAATTsuse.de- turn main::Prepare into an abspath
* Fri Aug 06 2010 msAATTsuse.de- make sure the cache holds the correct copy of the base image and not the cache image XML
* Fri Aug 06 2010 msAATTsuse.de- added arch information into caches
* Fri Aug 06 2010 msAATTsuse.de- update documentation, patch by Thomas Schraitle
* Fri Aug 06 2010 msAATTsuse.de- moved cache creation into functions initializeCache() selectCache() and createCache()- added meta information into root tree if cow cache is used. It\'s required to have the name of the cache clicfs available when running kiwi create on a root tree created with a clicfs based cache
* Thu Aug 05 2010 msAATTsuse.de- improve caching by creating clicfs files from the single caches and mount them with a cow file for further operations.... still experimental
* Thu Aug 05 2010 msAATTsuse.de- fixed xen/ec2 examples to clone services into runlevel 4 which is required by EC2
* Thu Aug 05 2010 msAATTsuse.de- changed ec2 account number back to default
* Thu Aug 05 2010 msAATTsuse.de- fixed boot image checksum creation in Makefile
* Thu Aug 05 2010 msAATTsuse.de- EC2: changed the way how ec2 images are created. We now bundle the ami from a raw disk Xen image using the ec2 kernel. Along with this change the xenboot boot image became obsolete and was removed in a previous commit. Support for Xen is now only availabe via disk image and Xen must support PVgrub in order to boot it
* Thu Aug 05 2010 msAATTsuse.de- EC2: update documentation about EC2 and Xen support
* Thu Aug 05 2010 msAATTsuse.de- EC2: removed support for xenboot boot images, xen/ec2 is disk based now
* Thu Aug 05 2010 msAATTsuse.de- EC2: removed suse-ec2-guest examples- EC2: added ec2Flavour into suse-xen-guest examples- EC2: changed suse-xen-guest examples image type to vmx with xen/ec2 kernel
* Wed Aug 04 2010 msAATTsuse.de- fixed changelog creation tool. Don\'t include information about branch merges or commits which just copied a changelog entry for a previos commit into the kiwi.changes file. We also don\'t include the svn to git conversion information as I think it\'s not required
* Wed Aug 04 2010 msAATTsuse.de- added xen guest example for 11.3
* Wed Aug 04 2010 ugAATTsuse.de- fixed respect write protection for Live medium (SD-card) bnc#623038
* Wed Aug 04 2010 msAATTsuse.de- fixed MBR rewrite call in installBootLoader()
* Wed Aug 04 2010 msAATTsuse.de- fixed check for foreign packages. The problem here was that the correct packages sections were checked for matching the profiles of the boot image but they should be checked against the profiles of the system image.
* Wed Aug 04 2010 msAATTsuse.de- don\'t check the return value of the e2fsck call. If the filesystem check was forced for example by a wrong system clock the check runs successfully but the return value is not zero.
* Wed Aug 04 2010 msAATTsuse.de- fixed license display problem when no localized license files exist but a license.txt file does
* Wed Aug 04 2010 msAATTsuse.de- add the vm guest example to openSUSE 11.3
* Tue Aug 03 2010 msAATTsuse.de- create the kiwi.changes file from the git log information
* Tue Aug 03 2010 msAATTsuse.de- add the live stick example to openSUSE 11.3
* Tue Aug 03 2010 msAATTsuse.de- write back masterBootID (MBR ID) to the master boot record after it has been changed by installBootLoader()
* Tue Aug 03 2010 msAATTsuse.de- added suse-euca-cloud examples for 11.3
* Tue Aug 03 2010 msAATTsuse.de- reverted last change: don\'t call root filesystem check for images (bnc #627021) this causes the fs to remount read-only on newer versions if suse; what a crappy reaction
* Tue Aug 03 2010 msAATTsuse.de- fixed repartition code for fdisk (SLE10) (bnc #627807)
* Tue Aug 03 2010 msAATTsuse.de- don\'t call root filesystem check for images (bnc #627021)
* Tue Aug 03 2010 msAATTsuse.de- if a fixed xml size was set for a filesystem image we use if even if kiwi\'s calculation says it\'s too small. This allows users to create the image with less or no free space but also could cause the image to fail because of no space left on device. We don\'t use the fixed xml size if it\'s too small for a virtual disk based image though because this could cause the image to be created successfully but then failed on boot which is a bad user experience (bnc #627031)
* Tue Aug 03 2010 msAATTsuse.de- v4.54 released
* Tue Aug 03 2010 msAATTsuse.de- fixed evaluation of PARTED_... variables (bnc #627593)
* Mon Aug 02 2010 msAATTsuse.de- added entire usb stack to initrd for SLE11 oemboot (bnc #627439)
* Mon Aug 02 2010 msAATTsuse.de- v4.53 released
* Mon Aug 02 2010 msAATTsuse.de- again fixed the check for specific parted versions. I now changed it to directly check for the available options in parted instead of the parted version number
* Mon Aug 02 2010 msAATTsuse.de- when creating a new cpio image make sure an eventually existing old version of .splash.gz will be removed
* Fri Jul 30 2010 msAATTsuse.de- put patterns into image package section instead of bootstrap I discovered strange errors with older zypper versions when building newer images
* Fri Jul 30 2010 msAATTsuse.de- v4.52 released
* Fri Jul 30 2010 msAATTsuse.de- added log information about used boot-theme
* Fri Jul 30 2010 msAATTsuse.de- clarify user creation and group association documentation- some alpha ordering inside the schema
* Thu Jul 29 2010 msAATTsuse.de- support add-pattern option in upgrade mode too
* Thu Jul 29 2010 msAATTsuse.de- add changelog entry for last commit- recreate documentation
* Thu Jul 29 2010 msAATTsuse.de- again fixed parted version setup
* Wed Jul 28 2010 msAATTsuse.de- again fixed PARTED_VER setup. older version strings looks different than the new ones. We had to standardize those too
* Tue Jul 27 2010 msAATTsuse.de- fixed PARTED_VER setup and tests. If the parted version is below or equal 1.8.8 we switch to fdisk. This applies for sle10 where parted doesn\'t have some options which we require
* Tue Jul 27 2010 msAATTsuse.de- added support for image caching. With this feature you can provide a cache directory along with the option --cache. kiwi in prepare step looks into the directory if it finds a cache serving as the base-root for the system image. If it can\'t find one it creates caches based on the patterns used in the image description which speeds up subsequent prepare calls for this and other images
* Tue Jul 27 2010 msAATTsuse.de- fixed solvable cache if only one solvable is created it was removed and not cached
* Tue Jul 27 2010 msAATTsuse.de- fixed use of uninitialized value for $dir
* Tue Jul 27 2010 msAATTsuse.de- fixed suse-11.3/suse-min-gnome example, added missing icewm and a terminal :)
* Tue Jul 27 2010 msAATTsuse.de- don\'t create splash initrd if it already exists
* Tue Jul 27 2010 msAATTsuse.de- fixed use of uninitialized value for $overlay
* Mon Jul 26 2010 msAATTsuse.de- fixed SLE10 boot images using gettext-runtime. This package doesn\'t exist there, it was gettext only (bnc #625392)
* Mon Jul 26 2010 msAATTsuse.de- accidently removed an important return statement in setupBootPartition
* Mon Jul 26 2010 msAATTsuse.de- v4.51 released
* Mon Jul 26 2010 msAATTsuse.de- fixed setupBootPartition() to return with a bootid export in _any_ case. Default bootid is 1 (bnc #625379)
* Fri Jul 23 2010 msAATTsuse.de- v4.50 released
* Fri Jul 23 2010 msAATTsuse.de- fixed URL quoting, we have to distinguish the quoting for local path URL\'s and network protocol URL\'s
* Thu Jul 22 2010 msAATTsuse.de- fixed xenconfig creation for vmx if no format was set
* Thu Jul 22 2010 msAATTsuse.de- fixed oem-partition-install for LVM images
* Thu Jul 22 2010 msAATTsuse.de- fixed use of uninitialized value and test -z usage in bash code
* Thu Jul 22 2010 msAATTsuse.de- fixed locale validation and documentation as well as some template examples provided by kiwi. The locale value in kiwi is always a UTF-8 locale therefore it\'s not allowed to add the encoding type to the locale string. We also support the xx_XX locale style only which is now all checked by the schema (bnc #620789)
* Thu Jul 22 2010 msAATTsuse.de- fixed documentation about the evaluation of the locale information
* Thu Jul 22 2010 msAATTsuse.de- fixed locale setup for some examples
* Wed Jul 21 2010 msAATTsuse.de- added 11.3 as migration target
* Wed Jul 21 2010 msAATTsuse.de- fixed suse-11.3/suse-pxe-client/config.xml
* Tue Jul 20 2010 msAATTsuse.de- fixed changelog chronology
* Tue Jul 20 2010 msAATTsuse.de- fixed oem recovery for LVM based images. It\'s required to backup the LVM metadata in order to restore it
* Tue Jul 20 2010 msAATTsuse.de- added main::isize function to replace the use of the -s operator. This is done because of SUSE Studio which maps a file to a block special under certain circumstances which causes -s to not work anymore
* Mon Jul 19 2010 msAATTsuse.de- v4.49 released
* Sat Jul 17 2010 rootAATTsuse.de- install bootloader for vmx and usb after initial deployment to make sure reboot works
* Fri Jul 16 2010 rootAATTsuse.de- added suport for the btrfs filesystem (bnc #596205)
* Fri Jul 16 2010 cwhAATTsuse.deFinally added driverupdate stuff to schema
* Fri Jul 16 2010 msAATTsuse.de- update ppc netboot image (copy of x86 version)
* Fri Jul 16 2010 rootAATTsuse.de- fixed Makefile boot image md5 creation time
* Fri Jul 16 2010 msAATTsuse.de- v4.48 released
* Fri Jul 16 2010 msAATTsuse.de- fixed recovery cleanup code- fixed umountSystem call to check proc/mounts and umount a list of possible system mount paths in the right order- netboot: fixed creation of read-write partition- netboot: fixed boot partition setup, IFS restore required- netboot: imageDiskDevice was not set but used
* Thu Jul 15 2010 msAATTsuse.de- v4.47 released
* Thu Jul 15 2010 msAATTsuse.de- fixed parted sector init if the disk has no partitions we need to set startSectors to 1
* Wed Jul 14 2010 msAATTsuse.de- v4.46 released
* Wed Jul 14 2010 msAATTsuse.de- fixed kernelList and xenServer functions:
* xenServer checks via kernel systemMap and kiwi_xendomain if a xen server bootloader setup is required
* kernelList is fixed to store the running kernel as first entry in the kernel list
* Wed Jul 14 2010 msAATTsuse.de- do not fail when image files are symlinks to a device
* Wed Jul 14 2010 msAATTsuse.de- fixed race condition resulting at times in message of not finding the MBR and other times not finding the CD drive.
* Tue Jul 13 2010 msAATTsuse.de- put the information about the xen domain setup into the initrd as variable kiwi_xendomain
* Tue Jul 13 2010 msAATTsuse.de- remove unneeded initrd.vmx and linux.vmx files _before_ calling mkinitrd. This saves space to not run into a space problem on the boot partition (bnc #621859)
* Tue Jul 13 2010 msAATTsuse.de- usb attribute in vmwareconfig doesn\'t exist anymore with the new machine section. usb is always present for vmware fixed xslt stylesheet for this case
* Fri Jul 09 2010 msAATTsuse.de- v4.45 released
* Fri Jul 09 2010 msAATTsuse.de- recovery tarball: tar is intelligent enough to find hard link references. This causes the archive to be smaller. But when kiwi installs the root tree into the image all hard link references will solve into a new inode. According to this the recreation of the tarball in combination with an inplace setup will always be bigger than the reference tarball from the root tree and this causes the recovery partition and/or the free space inside the root partition to be too small. I fixed this with the following tar option: --hard-dereference
* Fri Jul 09 2010 msAATTsuse.de- fixed convert38to39.xsl stylesheet
* Fri Jul 09 2010 msAATTsuse.de- fixed use of uninitialized value in fs tool check
* Thu Jul 08 2010 msAATTsuse.de- fixed evaluation of bool oem-inplace-recovery value
* Thu Jul 08 2010 msAATTsuse.de- moved in-place recovery file creation into suse-dump directly after the install verification (bnc #620777)
* Thu Jul 08 2010 msAATTsuse.de- don\'t put the recovery meta information into the recovery tarball when creating them dynamically
* Wed Jul 07 2010 msAATTsuse.de- clean up setupFirstBootYaST() function
* Wed Jul 07 2010 msAATTsuse.de- fixed build for s390
* Wed Jul 07 2010 rootAATTsuse.de- improved s390 template
* Wed Jul 07 2010 msAATTsuse.de- add some sanity checks
* Wed Jul 07 2010 msAATTsuse.de- fixed loop cleanup after zipl install
* Wed Jul 07 2010 msAATTsuse.de- operate on loop mounted boot partition when writing zipl
* Wed Jul 07 2010 msAATTsuse.de- fixed zipl.conf creation
* Wed Jul 07 2010 msAATTsuse.de- zipl requires block device to operate
* Wed Jul 07 2010 msAATTsuse.de- fixed zipl.conf creation
* Wed Jul 07 2010 msAATTsuse.de- fixed zipl.conf creation
* Wed Jul 07 2010 msAATTsuse.de- leave tmpdir in case of an error while writing the bootloader
* Wed Jul 07 2010 msAATTsuse.de- added zipl install into disk image file code
* Tue Jul 06 2010 msAATTsuse.de- fixed build
* Tue Jul 06 2010 msAATTsuse.de- don\'t let it diverge too much between x86 and s390 suse-preinit
* Tue Jul 06 2010 msAATTsuse.de- don\'t let it diverge too much between ix86 and s390 linuxrc code
* Tue Jul 06 2010 msAATTsuse.de- fixed zipl.conf, typo when writing image line
* Tue Jul 06 2010 msAATTsuse.de- fixed zipl.conf, forgot to add image
* Tue Jul 06 2010 msAATTsuse.de- fixed zipl.conf parameters setup
* Tue Jul 06 2010 msAATTsuse.de- fixed zipl.conf creation (invalid chars [], using () instead)
* Tue Jul 06 2010 msAATTsuse.de- zipl doesn\'t read the configuration from a filesystem so any change triggers a new bootloader install command
* Tue Jul 06 2010 msAATTsuse.de- fixed kernel search for s390 (image-...)
* Tue Jul 06 2010 msAATTsuse.de- fill setupBootLoaderS390() with live
* Tue Jul 06 2010 rootAATTsuse.de- added kernel package to s390 JeOS
* Tue Jul 06 2010 rootAATTsuse.de- fixed product name
* Tue Jul 06 2010 msAATTsuse.de- simplify s390 JeOS
* Tue Jul 06 2010 msAATTsuse.de- added README files in arch directories
* Tue Jul 06 2010 msAATTsuse.de- added support for the creation of the zipl.conf file the installation of zipl into the MBR from a loop file is still an open issue. We need to talk to IBM here first- restructure source tree a bit. make templates and repos architecture dependent because of the s390 implementations
* Tue Jul 06 2010 msAATTsuse.de- make sure virtio_blk is loaded
* Tue Jul 06 2010 msAATTsuse.de- match MBR id for little and big endian machines
* Tue Jul 06 2010 msAATTsuse.de- don\'t exit with an error if \'zypper rm\' can\'t find the package- check for profiles when searching for foreign packages also search in type=image and type=bootstrap package sections
* Mon Jul 05 2010 rootAATTsuse.de- removed SLE10 target for s390, we are starting with SLE11 SP1- added support for s390 kernel extraction from initrd (image file)- fixed vmxboot/oemboot boot image descriptions for s390- added kiwi-tools for s390/s390x
* Mon Jul 05 2010 adrianAATTsuse.de- fix syntax error from my last commit :/
* Fri Jul 02 2010 msAATTsuse.de- v4.44 released
* Fri Jul 02 2010 msAATTsuse.de- fixed this path evaluation (bnc #619482)
* Fri Jul 02 2010 msAATTsuse.de- fixed use of uninitialized iso object reference
* Thu Jul 01 2010 msAATTsuse.de- fixed repartition problem with new and old parted. The code has been changed in a way that it uses a sector based start value and a cylinder based end value
* Thu Jul 01 2010 msAATTsuse.de- call conversion module automatically but only if a format was set in config.xml. Exception: the xen image type, which requires a machine configuration but without a format conversion
* Thu Jul 01 2010 adrianAATTsuse.deMake volume id labels nicer on coolos request:
* Always strip -Media
* Do not add dots when stripping
* Do add media number .XXX suffix only when multiple medias exist
* Thu Jul 01 2010 msAATTsuse.de- added volume label for recovery partition (bnc #618276)
* Thu Jul 01 2010 msAATTsuse.de- use format from xml if specified and not set on the commandline for the conversion into another image format
* Wed Jun 30 2010 msAATTsuse.de- fixed minor ovf creation bugs. Note old versions of ovftool will not work with this version of kiwi because VMware changed the option set of their own tool completely
* Wed Jun 30 2010 msAATTsuse.de- update image descriptions via xslt
* Wed Jun 30 2010 msAATTsuse.de- added xslt stylesheet to convert from schema v4.6 to v4.7 the conversion moves the vmwareconfig and xenconfig sections into the common machine sections and also changes format=\"iso\" into installiso=\"true\" and format=\"usb\" into installstick=\"true\"
* Wed Jun 30 2010 msAATTsuse.de- update documentation according to the new KIWIImageFormat module and the changes in the type and VM configuration XML setup
* Tue Jun 29 2010 msAATTsuse.de- Cleanup formats in kiwi:
* create new KIWIImageFormat.pm module for the conversion into different image formats like vmdk,ovf and friends. Also added function for creating the machine configuration into this new module
* create common XML specification for vmware|xen config starting with
* added new option --convert to kiwi.
* recursively call kiwi with $main::Convert set to convert into the specified format and/or configuration
* added bool attributes installcd and installstick replacing the old format=\"iso\" and format=\"usb\" setup
* Mon Jun 28 2010 msAATTsuse.de- moved the XML validation ahead of the first data extraction- changed the way validation errors are reported. If the xml file was converted via XSL the error will be reported against the converted file. This makes the error reporting more meaningful as otherwise validation errors are reported that are due to the use of an older schema version.- fixed typo in convert45to46.xsl. Do not swallow attributes on packages of the vmware section- Thanks to Robert who did the last three ones, great work :)
* Fri Jun 25 2010 msAATTsuse.de- v4.43 released
* Fri Jun 25 2010 msAATTsuse.de- fixed copy of root tree into final image. We used cp -a $source/
* $dest which did not match the dot files in $source/.
* Therefore I changed this to use a tar based copy
* Thu Jun 24 2010 msAATTsuse.de- added oem-inplace-recovery option which allows creation of the recovery tarball at first deployment instead of creating the tarball and store it inside the image
* Wed Jun 23 2010 msAATTsuse.de- add bugid to changelog entry
* Wed Jun 23 2010 msAATTsuse.de- update the min gnome example to 11.3
* Wed Jun 23 2010 msAATTsuse.de- use cylinder based alignment with new parted version 2.2.x. This fixes the oem repartition code for systems which uses parted >= 2.2.x build on a parted 1.9.x build system. Also removed unused functions: partedGetSectors and partedStartCylinder
* Wed Jun 23 2010 msAATTsuse.de- fixed attribute validation, space and / is not allowed for this attribute
* Wed Jun 23 2010 msAATTsuse.de- started support for s390 imaging:
* zipl support in kiwi. This is still work in progress only the skeleton at the required code points has been added.
* adapted the JeOS sle11 template to provided a profile for x86 and s390 packages
* also added vmxboot and oemboot bootimages to be build The code there will work as initrd for an s390 guest within kvm
* Tue Jun 22 2010 msAATTsuse.de- added alpha-ordering patch from Robert
* Tue Jun 22 2010 msAATTsuse.de- added SLE11 target for migration
* Tue Jun 22 2010 msAATTsuse.de- strict and warning should be loaded first
* Tue Jun 22 2010 msAATTsuse.de- fixed broken patch :(
* Tue Jun 22 2010 msAATTsuse.de- fixed use of global file handles
* Tue Jun 22 2010 msAATTsuse.de- changed spec file requirement: require virt-utils for distro versions >= 11.3
* Tue Jun 22 2010 msAATTsuse.de- cleaned up split image code:
* unneeded directory checks
* multiple functions calls where one would be ok
* Tue Jun 22 2010 msAATTsuse.de- migration: added version to cache file
* Mon Jun 21 2010 msAATTsuse.de- fixed split section evaluation (bnc #615121)
* Fri Jun 18 2010 msAATTsuse.de- exit kiwi directly if the possible question to create the destination directory was canceled by the user
* Fri Jun 18 2010 msAATTsuse.de- v4.42 released
* Fri Jun 18 2010 msAATTsuse.de- avoid a Perl runtime error message from being printed if the XML file parsing fails.- changed findExec to return undef if the executable cannot be found. If as previously the execName is returned the caller has no way to differentiate whether or not the desired executable actually exists on the system.
* Thu Jun 17 2010 msAATTsuse.de- migration:
* fixed distro detection
* added support for harware dependent package information
* Thu Jun 17 2010 msAATTsuse.de- redesigned and restructure the kiwi migration module we were working in a small workgroup this week to establish a new version of the migration module. Thanks to everybody in my team.
* Thu Jun 17 2010 msAATTsuse.de- added distro tags to orphant package list
* Thu Jun 17 2010 msAATTsuse.de- allow plaindir repo for solvable creation
* Thu Jun 17 2010 msAATTsuse.de- migration:
* fixed deny list, service links must stay
* apply deny links on overlay tree
* Wed Jun 16 2010 msAATTsuse.de- fixed attr access
* Wed Jun 16 2010 msAATTsuse.de- fixed file/directory search for migration
* Wed Jun 16 2010 msAATTsuse.de- fixed Makefile- don\'t follow symlinks to directories in migration
* Tue Jun 15 2010 msAATTsuse.de- fixed spec file to provide /var/cache/kiwi- fixed migration to be faster in searching non packaged files / directories
* Tue Jun 15 2010 msAATTsuse.de- migration:- fixed filesystem scan- copy /etc entirely to root/- don\'t setup services- use product file to add system repository
* Mon Jun 14 2010 cwhAATTsuse.deDriverUpdateDisk support
* Mon Jun 14 2010 msAATTsuse.de- Remove some code duplication by using a new getDefaultBaseRoot() function
* Mon Jun 14 2010 msAATTsuse.de- Remove some code duplication by using a new createDirInteractive() function
* Fri Jun 11 2010 msAATTsuse.de- v4.41 released
* Thu Jun 10 2010 msAATTsuse.de- added oem-unattended element which allows unattended installation if possible
* Thu Jun 10 2010 msAATTsuse.de- use dialog program to show dump reboot message
* Thu Jun 10 2010 msAATTsuse.de- added oem-dumphalt element which reboots the system after the image was dumped (installed) on the target device. A message appears and the system waits for a key event before reboot
* Wed Jun 09 2010 msAATTsuse.de- reduce the scope of the eval around the config.xml file parsing. The only operation that may fail with an exception is the parsing, while accessing the resulting document does not generate exceptions, thus the eval (exception handling) should only enclose the code that actually may trigger an exception- improve the XML validation error reporting if jing is installed on the system
* Wed Jun 09 2010 msAATTsuse.de- also search for pattern file name in repomd.xml
* Wed Jun 09 2010 msAATTsuse.de- fixed repo-patterns info module
* Wed Jun 09 2010 msAATTsuse.de- add selinux hint for RHEL example template
* Wed Jun 09 2010 msAATTsuse.de- fixed README for rhel image creation
* Tue Jun 08 2010 msAATTsuse.de- v4.40 released
* Tue Jun 08 2010 msAATTsuse.de- fixed luks + lvm boot if no re-partition code is called
* Tue Jun 08 2010 msAATTsuse.de- update documentation, added kiwirc manual page. Fixed manual page creation to contain correct version info
* Tue Jun 08 2010 msAATTsuse.de- check that the specified log server port is numeric in nature
* Mon Jun 07 2010 msAATTsuse.de- setup xencons only for domU setup (bnc #561635)
* Fri Jun 04 2010 msAATTsuse.de- v4.39 released
* Fri Jun 04 2010 msAATTsuse.de- removed dbsulock from kiwi, hal is deprecated
* Wed Jun 02 2010 msAATTsuse.de- fixed CDMountOption() to use blkid type check (bnc #610649)
* Wed Jun 02 2010 msAATTsuse.de- use vmxboot linuxrc for usbboot too, make sure --bootstick deployment does a cleanup of the write partition if used
* Wed Jun 02 2010 msAATTsuse.de- changed ovtool call, they don\'t understand -oq but -o -q
* Tue Jun 01 2010 msAATTsuse.de- use \"kernel chain\" syntax for syslinux chain loader
* Mon May 31 2010 msAATTsuse.de- don\'t touch modules in updates and weak-updates (bnc #609879)
* Mon May 31 2010 msAATTsuse.de- v4.38 released
* Sun May 30 2010 msAATTsuse.de- added findExec() function to check for tools- fixed unneeded kpartx call in installBootLoader
* Fri May 28 2010 msAATTsuse.de- check if the rootEFD is defined before attempting to write to the file handle
* Fri May 28 2010 msAATTsuse.de- fixed usb stick creation for sys|extlinux
* Thu May 27 2010 msAATTsuse.de- make fbiterm work in vmx images too- fixed setup of initrd/kernel links, because of the change from a link to a bind mount we can now make that code simpler
* Thu May 27 2010 msAATTsuse.de- make sure boot image has enough space
* Thu May 27 2010 msAATTsuse.de- fixed boot configuration if overlay filesystem is used
* Thu May 27 2010 msAATTsuse.de- added support for extlinux based recovery (bnc #606651)- make recovery work with separate boot partition- use bind mount instead of link to boot partition
* Thu May 27 2010 mbarringerAATTsuse.deVery minor cleanups to the imagewriter
* Tue May 25 2010 msAATTsuse.de- fixed install cd boot parameters if ext|syslinux is used- fixed ext|syslinux setup in initrd code (KIWILinuxRC.sh)
* Tue May 25 2010 msAATTsuse.de- changed ovftool options according to latest version
* Tue May 25 2010 msAATTsuse.de- use isolinux for install CD\'s if sys|extlinux was requested as bootloader for an oem image plus install media (bnc #606651)- fixed clicfs resize operation. The command is now based on a 512 byte sector size value instead of a 4k filesystem block size value which might be wrong depending on the size of the filesystem (bnc #604646)
* Fri May 21 2010 msAATTsuse.de- v4.37 released
* Fri May 21 2010 ugAATTsuse.de- fixes endless building problem if function suseInsertService() is calling in config.sh and system/chroot contains a broken /etc/init.d/ script. (bnc #605981)
* Fri May 21 2010 msAATTsuse.de- oem: fixed creation of clicfs over LVM images- oem: fixed home device setup for LVM- oem: fixed fstab setup for LVHome
* Fri May 21 2010 msAATTsuse.de- update documentation and schema documentation due to last change (dmsquash support removed)
* Fri May 21 2010 msAATTsuse.de- fixed setLVMDeviceMap() function. The contents of $result{dmapper} were wrong if the device was a loop destination
* Fri May 21 2010 msAATTsuse.de- removed support for dmsquash filesystem. This implementation was replaced by clicfs. dmsquash was a combination of a squashfs filesystem together with a device mapper snapshot as copy-on-write part. There was no way to properly react if we run out of cow space which also makes this feature more or less useles in a production environment
* Fri May 21 2010 msAATTsuse.de- fixed size check for repart operation- make sure home has a min size of 500 MB if home partition was requested
* Thu May 20 2010 msAATTsuse.de- removed plusSuggested attribute, update documentation and added sort patch by Robert
* Thu May 20 2010 msAATTsuse.de- rewrote the oem partition code for better maintenance and to support syslinux/extlinux bootloader (bnc #606651)
* Wed May 19 2010 msAATTsuse.de- update documentation
* Wed May 19 2010 msAATTsuse.de- fixed packages type value \"net\" which should be pxe- added documentation update from Robert
* Tue May 18 2010 msAATTsuse.de- fixed typo in comment
* Tue May 18 2010 msAATTsuse.de- use tar command to copy overlay files which is more error prune than the cp command (bnc #476117)
* Tue May 18 2010 ugAATTsuse.de- fix for Bug 604705 - kiwi overwrites /etc/sysconfig/firstboot
* Tue May 18 2010 msAATTsuse.de- fixed replace package handling and update JeOS templates accordingly. This allows to bind multiple package actions bound to one package
* Tue May 18 2010 msAATTsuse.de- added support for type specific package sections . Along with this change a new Schema version 4.6 was introduced which automatically converts the type=\"vmware\" section into a type=\"vmx\" section
* Mon May 17 2010 msAATTsuse.de- added support for extlinux bootloader for vmx and usbboot. support for extlinux and oemboot will follow later. The repartition code of the oem images causes a more complex implementation for sys|extlinux.
* Mon May 17 2010 ugAATTsuse.de- check RPM version of autoyast
* Fri May 14 2010 msAATTsuse.de- added support for displayname for vmx type (bnc #605939)
* Fri May 14 2010 msAATTsuse.de- v4.36 released
* Fri May 14 2010 msAATTsuse.de- fixed in place search field text
* Fri May 14 2010 msAATTsuse.de- fixed some typo in migration js
* Fri May 14 2010 msAATTsuse.de- activate javascript in migration report
* Fri May 14 2010 msAATTsuse.de- added search field for unpackaged file list on the generated migration report page
* Fri May 14 2010 msAATTsuse.de- update schema documentation, schema doc hint fix
* Wed May 12 2010 msAATTsuse.de- better changelog entry for last fix
* Wed May 12 2010 msAATTsuse.de- revert last change to Dialog function and fixed luksOpen function to use the runInteractive() method for dialogs with input fields
* Wed May 12 2010 msAATTsuse.de- update translations from suse svn
* Wed May 12 2010 msAATTsuse.de- fixed Dialog function work with input fields
* Wed May 12 2010 msAATTsuse.de- fixed probeFileSystem function for luks detection. blkid returned crypto_LUKS which was missing in the case section
* Wed May 12 2010 msAATTsuse.de- v4.35 released
* Wed May 12 2010 msAATTsuse.de- disabled autoyastClone() temporarly, we need to find a way to call that only on >= 11.3 systems
* Wed May 12 2010 msAATTsuse.de- update migration css code
* Wed May 12 2010 msAATTsuse.de- fixed cleanup of xmlused/xmlorig files
* Wed May 12 2010 msAATTsuse.de- added .info file for cached solvables- fixed solvable pattern creation. It\'s required to lookup susetags even if there is a repodata meta data information to be able to create a full featured solvable including all pattern names
* Tue May 11 2010 msAATTsuse.de- migration changes:
* automatically copy the packaged but modified files into the overlay section and don\'t put them into the report
* create a HTML file list for the unpackaged files to browse through and update the text.
* Tue May 11 2010 msAATTsuse.de- deactivate splash screen for initial deployment in kiwi OEM boot images (bnc #600710)
* Tue May 11 2010 msAATTsuse.de- start sshd for SLE10 JeOS
* Tue May 11 2010 msAATTsuse.de- fixed rpmLibs() function, need ldconfig after cleanup
* Tue May 11 2010 msAATTsuse.de- some code cleanup in KIWIImage.pm, unused variables- call mkclicfs from the installed root tree instead of the build system to prevent version conflicts. If no clicfs is installed by the image description a warning message is displayed and the build system mkclicfs is used as before (bnc #604646)
* Mon May 10 2010 msAATTsuse.de- fixed min inode count when creating the virtual disk from a root directory instead of a root image file
* Mon May 10 2010 msAATTsuse.de- set fixed journal size to 12 MB, fixed size calculation in KIWIBoot.pm which did not take the journal size into account (bnc #587361)
* Fri May 07 2010 msAATTsuse.de- umountSystemFilesystems at the end of isoboot pre-init
* Fri May 07 2010 msAATTsuse.de- v4.34 released
* Fri May 07 2010 msAATTsuse.de- fixed old live iso type (no flags set) to work again. The problem was that we prevent --follow-symlinks in this mode but then we also have to copy the fixed read-write part as file to the iso structure instead of linking it. This fix is related to (bnc #599712)
* Fri May 07 2010 msAATTsuse.de- typo in changelog
* Fri May 07 2010 msAATTsuse.de- removed check for utimer program, it\'s not a mandatory requirement for the system to be able to boot correctly- fixed mkinitrd call, check if the option -B exists and don\'t pass it if it doesn\'t first (bnc #603338)
* Thu May 06 2010 msAATTsuse.de- beautify migration report and fixed html code
* Wed May 05 2010 msAATTsuse.de- fixed warning message if URL can\'t be resolved- fixed space problem when setting up boot partition for images which requires a separate boot partition which is the case for filesystems like clicfs. This caused a wrong copy of the initrd and prevents the system from being able to reboot
* Tue May 04 2010 msAATTsuse.de- package scripts change: use File::lchown qw( lutimes ); for changing the a|mtime of the symlinks inside the source tarball. This means all people who use \"make build\" from the kiwi source need to make sure they have the File::lchown module installed from CPAN
* Tue May 04 2010 msAATTsuse.de- preserve timestamps of source tarballs if not change has happened. I\'m still searching for a way to preserve timestamps of symlinks (cp -a has a bug and does not preserve it)
* Tue May 04 2010 msAATTsuse.de- fixed pxeSwapDevice to create the correct device node name using ddn function
* Tue May 04 2010 msAATTsuse.de- v4.33 released
* Tue May 04 2010 msAATTsuse.de- support partition type 8e (V) in pxePartitionInput()
* Mon May 03 2010 msAATTsuse.de- fixed build
* Mon May 03 2010 msAATTsuse.de- split up kiwi source into: source, repository and documentation tarballs to be more OBS friendly (bnc #601908)
* Mon May 03 2010 msAATTsuse.de- removed netboot specific partition code and replace it by the common partition functions used for oem and other tasks, related to (bnc #601890)
* Mon May 03 2010 msAATTsuse.de- added support for Xen dom0 over netboot (bnc #601890)
* Fri Apr 30 2010 adrianAATTsuse.deAdd cciss driver: make blade center with HP smart array controller supported
* Fri Apr 30 2010 msAATTsuse.de- added cyrus-sasl to netboot images (bnc #600951)
* Thu Apr 29 2010 msAATTsuse.de- moved the PARTITIONER change for hybrid into the CDMount function
* Thu Apr 29 2010 msAATTsuse.de- fixed createHybridPersistent: wait for new storage device before creating a filesystem. Also make sure imageDiskDevice is set before calling callPartitioner()
* Thu Apr 29 2010 msAATTsuse.de- added parted to isoboot images this is required for the hybrid persistent feature. also increased min space for clicfs embedded ext3 filesystem. Also fixed the createHybridPersistent() function to use fdisk instead of parted. The problem here is that parted doesn\'t accept the partitiont able written by the isohybrid tool.
* Thu Apr 29 2010 msAATTsuse.de- v4.32 released
* Wed Apr 28 2010 msAATTsuse.de- fixed repartition code for overlay systems (clicfs)
* Wed Apr 28 2010 msAATTsuse.de- fixed clicboot contents (kernel, initrd was missing)
* Wed Apr 28 2010 msAATTsuse.de- fixed repartition code for overlay systems (clicfs)
* Tue Apr 27 2010 msAATTsuse.de- fixed satplugin hash creation- sort package list in migration mode
* Tue Apr 27 2010 msAATTsuse.de- support new createrepo repomd.xml metadata information. kiwi now reads the repomd.xml if it exists and parses the primary data section in order to get all metadata file names
* Tue Apr 27 2010 msAATTsuse.de- don\'t create empty /var/lib/YaST2 directory during migration
* Tue Apr 27 2010 msAATTsuse.de- don\'t create install.inf and runme_at_boot in migration code we are creating the config-yast-autoyast.xml file and during kiwi prepare all required files to start autoyast are created by KIWIConfigure.pm
* Tue Apr 27 2010 msAATTsuse.de- fixed skip package detection in migration
* Tue Apr 27 2010 msAATTsuse.de- more file checks in migration autoyast clone code
* Tue Apr 27 2010 msAATTsuse.de- added file check before moving
* Tue Apr 27 2010 msAATTsuse.de- fixed regexp
* Mon Apr 26 2010 msAATTsuse.de- automatically skip the gpg-pubkey packages during migration
* Mon Apr 26 2010 msAATTsuse.de- removed kiwi\'s own pattern solving module. The satsolver approach is the preferred solution to implement this
* Fri Apr 23 2010 msAATTsuse.de- added alarm timer for HTTP requests. If a URL can\'t be resolved due to problems on the remote side the request will be canceled after 5 seconds
* Fri Apr 23 2010 msAATTsuse.de- v4.31 released
* Thu Apr 22 2010 msAATTsuse.de- removed atftp from SLED oem|netboot (bnc #598899)
* Thu Apr 22 2010 msAATTsuse.de- better changelog message for last fix
* Thu Apr 22 2010 msAATTsuse.de- use -t instead of -T for mke2fs
* Wed Apr 21 2010 msAATTsuse.de- update schema docs
* Wed Apr 21 2010 msAATTsuse.de- added support for OEM partition based install (bnc #597679)
* Tue Apr 20 2010 wfeldtAATTsuse.deuse gfxboot.c32 if gfxboot.com does not exist Signed-off-by: Steffen Winterfeldt
* Tue Apr 20 2010 msAATTsuse.de- fixed function dn(), added function nd() dn -> disk device name from device node nd -> device node number from device node
* Mon Apr 19 2010 msAATTsuse.de- removed SAP related code from boot images. This was only for a proof of concept and never lead to anything useful
* Sun Apr 18 2010 adrianAATTsuse.defix product building for current factory
* Fri Apr 16 2010 msAATTsuse.de- v4.30 released
* Fri Apr 16 2010 msAATTsuse.de- fixed kiwi -l output
* Thu Apr 15 2010 msAATTsuse.de- changed info module to print XML output
* Thu Apr 15 2010 msAATTsuse.de- fixed info module patterns selection- fixed info module repo-patterns output (prevent empty lines)
* Thu Apr 15 2010 msAATTsuse.de- fixed the --select types info module- fixed the info module to respect the XML profile setup
* Thu Apr 15 2010 msAATTsuse.de- nicer info output
* Thu Apr 15 2010 msAATTsuse.de- added package version and architecture information when requesting the solved packages list via --info
* Wed Apr 14 2010 msAATTsuse.de- remove 0 in partition ID detection
* Wed Apr 14 2010 msAATTsuse.de- fixed partedGetPartitionID() function to return correct ID
* Wed Apr 14 2010 msAATTsuse.de- added parted to vmxboot images
* Wed Apr 14 2010 msAATTsuse.de- reverted last change in default split section
* Wed Apr 14 2010 msAATTsuse.de- fixed split boot, cleanImage is not allowed to umount the required but non busy symlinked read-write part
* Wed Apr 14 2010 msAATTsuse.de- cleaned up unused variables in KIWIImage.pm
* Wed Apr 14 2010 msAATTsuse.de- enhanced KIWILinuxRC create/resize filesystem functions to be able to return only the command without actually invoking it
* Mon Apr 12 2010 msAATTsuse.de- version v4.29
* Mon Apr 12 2010 msAATTsuse.de- speedup prepare step by not removing the repository when the chroot switch happens
* Mon Apr 12 2010 msAATTsuse.de- restart utimer in pre-init stage, also put the time information into /dev which is a bind mounted location
* Mon Apr 12 2010 msAATTsuse.de- Don\'t update bootloader when calling mkinitrd. The bootloader setup in the first place was done by kiwi (bnc #595073)
* Fri Apr 09 2010 msAATTsuse.de- activate verbose mode for --info module
* Fri Apr 09 2010 adrianAATTsuse.defix skipping of not wanted release packages, because they are not on media. (#594808)
* Fri Apr 09 2010 msAATTsuse.de- fixed info module to work with loop media like iso://
* Thu Apr 08 2010 msAATTsuse.de- v4.28- fixed typo in repo prio message
* Thu Apr 08 2010 msAATTsuse.de- make ppc netboot suse-linuxrc the same as for ix86
* Thu Apr 08 2010 msAATTsuse.de- removed SAP related code. This was only for a proof of concept and never lead to anything useful
* Thu Apr 08 2010 msAATTsuse.de- added common functions resizeFilesystem() and createFilesystem() in KIWILinuxRC.sh
* Thu Apr 08 2010 msAATTsuse.de- added suse-11.3 boot and image templates. Also removed suse-11.0 boot and image templates- cleaned up spec file, removed prebuild code and package which is not used by anybody
* Wed Apr 07 2010 msAATTsuse.de- fixed bootnext boot from harddrive feature (bnc #583212)
* Wed Apr 07 2010 msAATTsuse.de- forgot to add probeFilesystem bevore restoring home filesystem because of this only the default action (ext3) applies
* Wed Apr 07 2010 msAATTsuse.de- also use the root filesystem type for the optional home filesystem while in a OEM deployment process (bnc #594202)- make the recovery filesystem an ext2 filesystem- fixed createPartedInput() to always have a partition ID
* Tue Apr 06 2010 msAATTsuse.de- added missing \"done\" status
* Tue Apr 06 2010 msAATTsuse.de- ovftool will create junks of data according to the image size to allow better download performance. Because of this I changed the call to create new files in a separate directory
* Tue Mar 30 2010 msAATTsuse.de- added iputils package to 11.2 JeOS
* Mon Mar 29 2010 msAATTsuse.de- v4.27- fixed --build option, glob check did not work (bnc #591889)
* Fri Mar 26 2010 msAATTsuse.de- leave /mnt directory before calling umountSystem- fixed bc division by zero
* Fri Mar 26 2010 msAATTsuse.de- leave libnss_dns inside the boot images for name resolution- don\'t print usage message for inst-source module, works suse internally only at the moment
* Thu Mar 25 2010 msAATTsuse.de- fixed cloud examples, use rsyslog in 11.2 example
* Thu Mar 25 2010 msAATTsuse.de- use bootnext \'boot from hard disk\' for ISO\'s too (bnc #583212)
* Thu Mar 25 2010 msAATTsuse.de- added uncompressed tar size information for OEM recovery
* Thu Mar 25 2010 msAATTsuse.de- update changelog- cleanup the yast clone config code a bit
* Thu Mar 25 2010 ugAATTsuse.de
* autoyast cloning code added to migration
* Thu Mar 25 2010 msAATTsuse.de- update XML catalog and format of suse-euca-cloud example
* Tue Mar 23 2010 msAATTsuse.de- switched to parted as default partition tool
* Tue Mar 23 2010 msAATTsuse.de- removed destdir check for migration
* Tue Mar 23 2010 msAATTsuse.de- force base destination directory for image migration and update documenation about migration
* Tue Mar 23 2010 msAATTsuse.de- added /mnt/var/cache/recovery/oem-trigger to be written after the kiwi recover/restore process in order to allow scripts to do something on boot of the recovered/restored system (bnc #586529)
* Mon Mar 22 2010 msAATTsuse.de- v4.25- added bootnext program which implements a small boot loader needed for the \'boot from hard disk\' menu entry on usb media. It basically loads the mbr from the first drive that is not the usb stick. Thanks to Steffen Winterfeldt who implemented this (bnc #583212)
* Sun Mar 21 2010 mbarringerAATTsuse.deFixing the imagewriter desktop file and spec file
* Sun Mar 21 2010 mbarringerAATTsuse.deAdd a helpful message when there are no USB keys present
* Fri Mar 19 2010 msAATTsuse.de- added example to create cloud infrastructure images based on Eucalyptus
* Fri Mar 19 2010 msAATTsuse.de- fixed error which is triggered if the overlay root directory of the image description exists but is empty.
* Fri Mar 19 2010 msAATTsuse.de- added dialog based OEM install verification UI
* Fri Mar 19 2010 msAATTsuse.de- fixed runInteractive() exit code handling
* Fri Mar 19 2010 msAATTsuse.de- added \"Select disk for installation\" to getText (bnc #589667)
* Thu Mar 18 2010 msAATTsuse.de- only recommend squashfs don\'t require it
* Thu Mar 18 2010 msAATTsuse.de- added setterm -powersave off -blank 0 for boot images
* Thu Mar 18 2010 msAATTsuse.de- fixed udevKill in pre-init by udevSystemStop()
* Thu Mar 18 2010 msAATTsuse.de- fixed pattern/product evaluation
* Thu Mar 18 2010 msAATTsuse.de- set /tmp to be a write path in KIWISplit.txt
* Thu Mar 18 2010 msAATTsuse.de- fixed build
* Thu Mar 18 2010 msAATTsuse.de- added support for RHEL 5.4 in kiwi. This includes:
* custom rhel-repo with hwinfo, gfxboot and friends
* support for yum package manager backend
* JeOS template for RHEL 5.4
* isoboot boot image description for RHEL 5.4
* NOTE: only the iso type has been implemented so far
* Wed Mar 17 2010 msAATTsuse.de- fixed long startup time because of ldconfig running when KIWILinuxRC is sourced from the shell- don\'t use killproc,killall inside the boot images. All procs are written to /iprocs and are handled when required
* Tue Mar 16 2010 msAATTsuse.de- added Xen dom0 hypervisor check if domain=\"dom0\" is set- fixed Xen dom0 bootloader configuration
* Tue Mar 16 2010 msAATTsuse.de- fixed --build option in kiwi
* Mon Mar 15 2010 msAATTsuse.de- fixed getSize, +5M journal size- fixed install stick free space setup
* Mon Mar 15 2010 msAATTsuse.de- leave libresolv inside the initrd to allow name resolution- fixed default pxeboot file, use kiwiserver
* Mon Mar 15 2010 msAATTsuse.de- v4.23- fixed getSize() function taking journal size into account- fixed getSize() function round values not truncate them
* Fri Mar 12 2010 msAATTsuse.de- fixed typo in documentation
* Thu Mar 11 2010 msAATTsuse.de- fixed quoting in baseUpdateSysConfig (bnc #587132)- turn destdir into absolute path directly after the option parser (bnc #584200)
* Wed Mar 10 2010 msAATTsuse.de- remove empty dirs in rpmLibs (\"clean\") (bnc #536256)
* Wed Mar 10 2010 msAATTsuse.de- allow LWP proxy setting from environment (bnc #586655)
* Tue Mar 09 2010 adrianAATTsuse.de- support architectures for products, which are not specified in fallback lists (fixes glibc.i686 case) Conflicts: rpm/kiwi.changes
* Tue Mar 09 2010 mbarringerAATTsuse.deAdding two new command flags:-l, which lists USB devices-k, which sets the imagewriter in \"kiosk mode\" (it won\'t list drives > 200GB)
* Mon Mar 08 2010 msAATTsuse.de- v4.22- fixed missing xen package in oemboot/suse-11.2 boot image description (bnc #561635)
* Mon Mar 08 2010 adrianAATTsuse.deuse fallback handling to LABEL for readme.beta string
* Fri Mar 05 2010 msAATTsuse.de- removed nsswitch conf from being copied before the packagemanager is called the first time. that was a bad idea. Imagine you have configured ldap for passwd or something. It should use nsswitch.conf coming with the glibc installation in the chroot.
* Fri Mar 05 2010 msAATTsuse.de- fixed root tree creation build inconsistencies because of missing libraries at the beginning of the root tree creation. The first fix for this bug did not work in mixed arch environments (bnc #536256)
* Thu Mar 04 2010 adrianAATTsuse.de
* make them bootable and yast working again, fixing linked packages for all archs
* Thu Mar 04 2010 adrianAATTsuse.dechange string in README.BETA to \"SUMMARY + BETA_VERSION\"
* Thu Mar 04 2010 msAATTsuse.de- added better log information about size calculation
* Thu Mar 04 2010 adrianAATTsuse.de
* fix multiarch medias, when using metapackages with onlyarch
* sync arch fallback handling between repo and meta packages
* Wed Mar 03 2010 msAATTsuse.de- v4.21- ext4 (currently) should be mounted with \'nodelalloc\'; else we might run out of space unexpectedly...
* Wed Mar 03 2010 msAATTsuse.de- added \'boot from harddrive\' as default menu selection for the installation images (CD+USB). Thus remove the request to remove the media after the image dump to the hard drive is complete. (bnc #583212)
* Wed Mar 03 2010 msAATTsuse.de- rebuild documentation
* Wed Mar 03 2010 msAATTsuse.de- renamed Xen kernel profile \'nex\' to \'xenk\'. The original name causes confusion to some people. Also removed xen support from netboot (pxe) images and adapted JeOS image descriptions.
* Tue Mar 02 2010 ugAATTsuse.de
* fixed a quoting bug (bnc#584651)
* Tue Mar 02 2010 adrianAATTsuse.de- support arch= statements for metapackages correctly- make missing metapackage for a required arch a warning (we missuse onlyarch atm)
* Mon Mar 01 2010 msAATTsuse.de- allow empty lvmvolumes section, if one only wants to set the volume group name but no volumes except for root
* Mon Mar 01 2010 msAATTsuse.de- some message cosmetics :-)
* Mon Mar 01 2010 msAATTsuse.de- more visible message to check the migration report file
* Mon Mar 01 2010 msAATTsuse.de- update migration table, sources are taken from zypper
* Mon Mar 01 2010 msAATTsuse.de- v4.20- migration: fixed operating system detection- fixed getLVMGroupName() not accessing an undefined value- fixed LVM cleanup code
* Fri Feb 26 2010 msAATTsuse.de- use $FSInodeSize instead of fixed value
* Fri Feb 26 2010 msAATTsuse.de- add spare 1.1 for vmsize
* Fri Feb 26 2010 msAATTsuse.de- fixed getSize() function. The size of the inodes are part of the size calculation now
* Fri Feb 26 2010 msAATTsuse.de- added trang as a build requirement to the spec- tighten up the XML checking a bit thus that some errors in the XML are detected at validation rather than later during processing.- cleanup: remove the matching of \"yes\" as a supported value for boolean types
* Fri Feb 26 2010 msAATTsuse.de- allow profiled repository sections
* Thu Feb 25 2010 msAATTsuse.de- don\'t log commands used to create the XML diff in the log file
* Thu Feb 25 2010 msAATTsuse.de- v4.19- added a JFYI headline in the log file and print only relevant information in the log excerpt in case of errors. This increases the chance to see the error (bnc #583125)
* Thu Feb 25 2010 adrianAATTsuse.deredo my last commit, still fail if metapackage was not found for any architecure
* Thu Feb 25 2010 adrianAATTsuse.de- missing metapackages are no error anymore, since we need fallback to noarch (but we still warn)- remove obsolete code
* Thu Feb 25 2010 adrianAATTsuse.deKIWICollect: fix links for packages below /boot (bnc#579936) (done by Rudi)
* Wed Feb 24 2010 msAATTsuse.de- fixed documentation example section
* Wed Feb 24 2010 msAATTsuse.de- fixed spec file noarch, allowed with > 11.2 only
* Wed Feb 24 2010 msAATTsuse.de- migration: update schema version to 4.4- migration: update skip list
* Tue Feb 23 2010 msAATTsuse.de- migration: exclude lock files
* Tue Feb 23 2010 msAATTsuse.de- removed imagewriter from kiwi packages, it is provided as separate package now maintained by mbarringerAATTnovell.com
* Tue Feb 23 2010 msAATTsuse.de- migration: fixed report messages, better English :)
* Mon Feb 22 2010 msAATTsuse.de- migration: use pre tag to display zypper solutions
* Mon Feb 22 2010 msAATTsuse.de- migration:
* added detection for packages installed multiple times
* improvement report explanations
* Mon Feb 22 2010 msAATTsuse.de- v4.18- fixed display of EULA messages
* Sat Feb 20 2010 mbarringerAATTsuse.deFixing bug with non-hybrid ISO files
* Fri Feb 19 2010 msAATTsuse.de- fixed duplicate kernel options
* Fri Feb 19 2010 msAATTsuse.de- fixed use of kiwi_cmdline in initrd
* Fri Feb 19 2010 msAATTsuse.de- removed commandline from pxedeploy section. kernel commandline parameters are set by the kernelcmdline attribute now (bnc #577720). Update schema version to 4.4 and add an XSLT to remove commandline when required
* Fri Feb 19 2010 mbarringerAATTsuse.deBumping the imagewriter version
* Thu Feb 18 2010 mbarringerAATTsuse.deSet the .desktop file for the imagewriter correctly
* Thu Feb 18 2010 mbarringerAATTsuse.deAdd icons for the imagewriter
* Thu Feb 18 2010 mbarringerAATTsuse.deCleaning the imagewriter up and also adding an \"about\" box
* Thu Feb 18 2010 mbarringerAATTsuse.deAdd COPYING file to comply with GPL
* Thu Feb 18 2010 msAATTsuse.de- fixed function comments in runInteractive()
* Thu Feb 18 2010 msAATTsuse.de- added support for additional kernel commandline options specified as kernelcmdline attribute (bnc #577720)
* Wed Feb 17 2010 mbarringerAATTsuse.deIncrease the imagewriter version
* Wed Feb 17 2010 mbarringerAATTsuse.deDetect non-hybrid ISOs
* Wed Feb 17 2010 adrianAATTsuse.deadd changelog entry for last commit Conflicts: rpm/kiwi.changes
* Wed Feb 17 2010 adrianAATTsuse.defix arch condition handling for meta package collection
* Wed Feb 17 2010 msAATTsuse.de- test
* Wed Feb 17 2010 mbarringerAATTsuse.deAdded USB key insertion/removal detection
* Wed Feb 17 2010 msAATTsuse.de- added support for additional kernel commandline options specified in the new section (bnc #577720)
* Wed Feb 17 2010 msAATTsuse.de- don\'t remove ldap and sasl in oemboot it\'s required for curl based downloads
* Tue Feb 16 2010 msAATTsuse.de- moved lvmgroup attribute into the lvmvolumes section
* Tue Feb 16 2010 msAATTsuse.de- v4.17- update documentation- changed migration to use root path directly and don\'t mount the root device before. As we can\'t mount it read-only because it\'s already mounted read-write I decided to prevent the mount at all and exclude any remote mounted location by searching through /proc/mounts
* Tue Feb 16 2010 msAATTsuse.de- don\'t remove libidn it\'s required for curl based downloads
* Mon Feb 15 2010 msAATTsuse.de- v4.17- fixed xen building with empty or no type=xen packages
* Mon Feb 15 2010 adrianAATTsuse.dedo not fail on creating directory which might be there already. (fixes openSUSE:Factory ftp tree generation)
* Mon Feb 15 2010 adrianAATTsuse.deruntime fix from Rudi to process Eula.txt correctly without error
* Mon Feb 15 2010 adrianAATTsuse.dedo not die on not used release package
* Mon Feb 15 2010 msAATTsuse.de- fixed cleanup of hosts file (bnc #579852)
* Fri Feb 12 2010 msAATTsuse.de- update migration chapter
* Thu Feb 11 2010 msAATTsuse.de- v4.16- make setupSplash() to operate in a temp dir (bnc #579134)
* Thu Feb 11 2010 msAATTsuse.de- fixed name resolution inside chroot if curl backend is used zypper uses libcurl for ftp transfers (bnc #578687)
* Thu Feb 11 2010 mbarringerAATTsuse.deAdding a TODO file for the imagewriter
* Wed Feb 10 2010 msAATTsuse.de- migration: fixed file find function- migration: fixed broken link search / removal
* Wed Feb 10 2010 msAATTsuse.de- migration: added zypper repos to config.sh if not local
* Wed Feb 10 2010 mbarringerAATTsuse.deMinor imagewriter text changes
* Wed Feb 10 2010 msAATTsuse.de- update documentation
* Wed Feb 10 2010 msAATTsuse.de- migration: fixed version lookup- migration: fixed report creation
* Wed Feb 10 2010 msAATTsuse.de- fixed typo
* Wed Feb 10 2010 msAATTsuse.de- fixed repo metadata download, cleanMount was called too early- fixed error handling in report file creation
* Tue Feb 09 2010 msAATTsuse.de- enable noarch subpackages
* Tue Feb 09 2010 msAATTsuse.de- update documentation
* Mon Feb 08 2010 msAATTsuse.de- added bug ID
* Mon Feb 08 2010 msAATTsuse.de- handle reboot request only if we are not in recovery mode
* Mon Feb 08 2010 msAATTsuse.de- moved EC2 options into a new ec2config section (bnc #577883)
* Mon Feb 08 2010 msAATTsuse.de- v4.15- fixed default split section usage for iso type
* Fri Feb 05 2010 msAATTsuse.de- added XSL transformation for latest XML changes Thanks to Robert for doing this
* Fri Feb 05 2010 msAATTsuse.de- prevent double / in activateImage
* Fri Feb 05 2010 msAATTsuse.de- v4.14- update documentation due to latest XML changes- don\'t probeFileSystem if FSTYPE is nfs- mounting sys devices with -o nolock doesn\'t make much sense- use rpcbind as an alternative to portmap
* Fri Feb 05 2010 msAATTsuse.de- update documentation
* Thu Feb 04 2010 msAATTsuse.de- removed unneded xenconfig information from templates if dom0 setup is used
* Thu Feb 04 2010 msAATTsuse.de- fixed migration mount setup and clean code allow zypper types dvd:// and iso:// to be used
* Thu Feb 04 2010 msAATTsuse.de- fixed templates, Xen based OEM image should be a dom0- Xen dom0 images doesn\'t require a xenconfig file
* Wed Feb 03 2010 msAATTsuse.de- fixed migration mount setup and clean code
* Wed Feb 03 2010 msAATTsuse.de- v4.13- prevent XML pretty printer from swallowing comments
* Wed Feb 03 2010 adrianAATTsuse.deenforce the \"print\" logging again for KIWICollect for significant speedup. However, we should rework the KIWICollect logging, but using KIWILog module would require significant speedup there.
* Tue Feb 02 2010 msAATTsuse.de- fixed build
* Tue Feb 02 2010 msAATTsuse.de- allow image=\"product\" for inst-source module- fixed NBD setup, make swap and RW an option
* Tue Feb 02 2010 msAATTsuse.de- don\'t ask questions on oemboot pxe based install
* Tue Feb 02 2010 msAATTsuse.de- added support for OEM installation via PXE. To setup your PXE boot server do the following: 1) create an OEM install ISO (format=\"iso\") 2) loop mount the created .iso file to /mnt and copy the following files to the PXE boot server:
* copy /mnt/boot/initrd => /srv/tftpboot/boot
* copy /mnt/boot/linux => /srv/tftpboot/boot
* copy /mnt/image.gz => /srv/tftpboot/image
* copy /mnt/image.gz.md5 => /srv/tftpboot/image 3) set the kernel commandline parameter pxe=1 via the append line in your PXE configuration. Alternatively the image can be stored on a FTP,HTTP server specified via the kiwiserver and kiwiservertype append information
* Mon Feb 01 2010 msAATTsuse.de- added bug ID
* Mon Feb 01 2010 msAATTsuse.de- v4.12- don\'t move overlay mounts to real-root if NFS-root is used additionally prevent the ROOT_FSCK in case of NFS-root- allow NFSROOT and NBDROOT to be overlayed with a remote read-write location
* Mon Feb 01 2010 msAATTsuse.de- fixed incorrect handling of unit=\"G\" values (bnc #574660)
* Mon Feb 01 2010 msAATTsuse.de- v4.11- added kernel/initrd update hotfix mechanism based on kexec It is possible to put the kernel file named linux.kexec and the initrd file named initrd.kexec on the first partition of a USB stick. If you plugin the stick and boot with the kernel option hotfix=1 it allows you to replace the existing kernel and initrd with the one on the stick- increased wait time for dhcp lease file up to 20sec (bnc #575561)
* Mon Feb 01 2010 adrianAATTsuse.decreate 11.3 fork, which is current factory. We basically need this to destinguish between kiwi 4.1 and 3.74 to write correct kiwi xml again.
* Thu Jan 28 2010 msAATTsuse.de- update schema documentation
* Thu Jan 28 2010 msAATTsuse.de- fixed inode calculation (bnc #574660)
* Thu Jan 28 2010 msAATTsuse.de- fixed backtrace de-/activation functions
* Thu Jan 28 2010 msAATTsuse.de- make XSL diff more readable
* Wed Jan 27 2010 msAATTsuse.de- set XML element only if it\'s not already set with that value- better XML diff output in logfile
* Tue Jan 26 2010 msAATTsuse.de- fixed build
* Mon Jan 25 2010 msAATTsuse.de- v4.10- applied XML changes with the following effects
* the image type is no longer an element content but an attribute called image=\"type\" inside the type element
* all oem elements are now part of the new oemconfig section
* the sections oemconfig,pxedeploy,split,vmwareconfig,xenconfig,lvmvolumes are now type specific and have to be specified inside a type
* migration code has been adapted to 4.1 schema
* documentation has been adapted to 4.1 schema- added clicfs as spec file requirement (bnc #573357)
* Mon Jan 25 2010 msAATTsuse.de- added pretty xsl
* Mon Jan 25 2010 msAATTsuse.de- fixed boot type check
* Mon Jan 25 2010 msAATTsuse.de- print a jing helper message if schema validation failed
* Mon Jan 25 2010 msAATTsuse.de- update to XML version 4.1- update documentation
* Fri Jan 22 2010 msAATTsuse.de- update migration XML creation
* Fri Jan 22 2010 msAATTsuse.de- fixed XML parsing- fixed XML diff
* Fri Jan 22 2010 msAATTsuse.de- fixed XML parsing
* Fri Jan 22 2010 msAATTsuse.de- fixed XML parsing
* Fri Jan 22 2010 msAATTsuse.de- fixed XML parsing
* Fri Jan 22 2010 msAATTsuse.de- fixed XML parsing
* Fri Jan 22 2010 msAATTsuse.de- fixed XML parsing
* Fri Jan 22 2010 msAATTsuse.de- changed parser function according to new XML layout
* Thu Jan 21 2010 msAATTsuse.de- first start of better XML description moving pxedeploy split vmwareconfig xenconfig lvmvolumes into type adding new oemconfig section
* Thu Jan 21 2010 cwhAATTsuse.deAdded missing requires for sysopen constants
* Wed Jan 20 2010 msAATTsuse.de- fixed missing ddn call to solve the device node in vmxboot too (bnc #571948)
* Wed Jan 20 2010 msAATTsuse.de- v3.95- fixed missing ddn call to solve the device node (bnc #571948)
* Wed Jan 20 2010 msAATTsuse.de- removes sax2 and let the 11.2 based example use the X11 auto configuration feature in the suse-min-gnome example image description
* Tue Jan 19 2010 cwhAATTsuse.deIntegrated KIWIIsoLinux-gen-s390-cd-kernel.pl into KIWIIsoLinux.pm
* Tue Jan 19 2010 msAATTsuse.de- v3.94- fixed baselibs setup for 64bit image builds- fixed split grub setup for install CD/Stick- fixed split section parsing, remove trailing slash if no information follows
* Mon Jan 18 2010 msAATTsuse.de- use -F for mke2fs calls
* Mon Jan 18 2010 msAATTsuse.de- don\'t let xsltproc write into fixed /tmp location (bnc #571558)- prevent USB device scan for pxe boot images (bnc #570961)
* Mon Jan 18 2010 msAATTsuse.de- added config function to disable Ctrl-Alt-Del in inittab
* Fri Jan 15 2010 msAATTsuse.de- added bug number
* Fri Jan 15 2010 msAATTsuse.de- allow AOEROOT to contain the read-write device
* Fri Jan 15 2010 msAATTsuse.de- v3.93- moved package deletion into own function and adapt the examples. remove --noscripts for deleting packages this could cause files to stay in the system which has a bad impact core utilities like mkinitrd. If for example busybox is uninstalled without calling the postscript the mkinitrd setup links will stay as broken links and cause mkinitrd to stop working (bnc #570948)
* Thu Jan 14 2010 msAATTsuse.de- update docs
* Thu Jan 14 2010 msAATTsuse.de- v3.92- fixed typo in getPXEDeployTimeout()- forbid / to be specified in lvmvolumes (bnc #570398)- allow absolute size value for lvm volumes (bnc #570396)
* Wed Jan 13 2010 adrianAATTsuse.defix writing of RELEASE line in content file
* Wed Jan 13 2010 ugAATTsuse.de- more KIWIURL::quote() fixes (bnc #561855)
* Wed Jan 13 2010 msAATTsuse.de- create /srv/tftpboot/pxelinux.cfg/default only if not exist
* Wed Jan 13 2010 msAATTsuse.de- rebuild docs
* Wed Jan 13 2010 msAATTsuse.de- don\'t set disk cmdline parameter for pxe local grub setup
* Tue Jan 12 2010 cwhAATTsuse.deAdded autobuild script for generationg s390 cd kernel
* Tue Jan 12 2010 msAATTsuse.de- fixed clicfs usage in combination with pxe image type
* Tue Jan 12 2010 cwhAATTsuse.de- Fixed s390 boot
* Mon Jan 11 2010 msAATTsuse.de- partially reverted last patch- fixed md5 file creation for clicfs images
* Mon Jan 11 2010 msAATTsuse.de- v3.91- fixed md5 file creation for clicfs images when used with PXE- fixed validateSize() to take care for zblocks
* Mon Jan 11 2010 msAATTsuse.de- added first version of report html creation- again fixed KIWIURL::quote(). perl file checks doesn\'t allow quoted items (bnc #561855)
* Mon Jan 11 2010 cooloAATTsuse.dedo not error out - there are architectures without gfxboot.cfg (basically all but pcs)
* Sat Jan 09 2010 msAATTsuse.de- fixed use of uninitialized value (bnc #569191)
* Fri Jan 08 2010 msAATTsuse.de- v3.90- changed default type to oem for migration result
* Fri Jan 08 2010 msAATTsuse.de- fixed handling of oem-reboot request. preinit needs to run before this request is processed (bnc #563864)
* Fri Jan 08 2010 msAATTsuse.de- migration: allow skipping parts of the process
* Fri Jan 08 2010 msAATTsuse.de- fixed quoting when importing kernel cmdline (bnc #536309)
* Thu Jan 07 2010 msAATTsuse.de- migration: added modified files tree
* Thu Jan 07 2010 msAATTsuse.de- fixed percentage counter
* Thu Jan 07 2010 msAATTsuse.de- migration: added modified files information
* Thu Jan 07 2010 msAATTsuse.de- migration: fixed xml creation
* Thu Jan 07 2010 msAATTsuse.de- migration: added a todo
* Thu Jan 07 2010 msAATTsuse.de- migration performance fixes
* Thu Jan 07 2010 msAATTsuse.de- added udevPending() to waitFor
* functions (bnc #547862)
* Wed Jan 06 2010 msAATTsuse.de- migration: fixed version detection
* Tue Jan 05 2010 msAATTsuse.de- fixed cache creation
* Tue Jan 05 2010 msAATTsuse.demigration:
* added cache file
* some performance tweaks
* Tue Jan 05 2010 msAATTsuse.de- migration: fixed path setup
* Tue Jan 05 2010 msAATTsuse.de- fixed option setup for rpm -Va
* Tue Jan 05 2010 msAATTsuse.de- migration: create overlay root tree as hard linked list
* Tue Jan 05 2010 msAATTsuse.de- some work on the migration front [still WIP]:
* changed to report -> perform system, fixed solvable creation and provide better information about package and pattern conflicts. Changed system to use the zypper defined repos and product information for the migration
* Mon Jan 04 2010 msAATTsuse.de- fixed use of quiet variable
* Mon Jan 04 2010 msAATTsuse.de- use default inode count for lvmparts (bnc #567580)
* Mon Jan 04 2010 msAATTsuse.de- v3.89- fixed dirPath() function, related to (bnc #561855)- fixed KIWIURL::quote() for special \'$\' char (bnc #561855)
* Mon Dec 21 2009 cwhAATTsuse.defixed usage of string relational operator in numerical context
* Fri Dec 18 2009 adrianAATTsuse.desync more parameters for the EFI case
* Fri Dec 18 2009 adrianAATTsuse.delimit volume id\'s to 32bytes or genisoimage aborts
* Thu Dec 17 2009 cwhAATTsuse.defixed efi boot
* Thu Dec 17 2009 msAATTsuse.de- v3.88- removed adaptec-firmware from SLED boot images. The package does not exist on SLED (bnc #562224)
* Wed Dec 16 2009 msAATTsuse.de- v3.87- added support for plaintext passwords
* Tue Dec 15 2009 msAATTsuse.de- fixed user cancel exception text (bnc #557100)
* Tue Dec 15 2009 msAATTsuse.de- v3.86- call scripts in C env for LC_ALL and LANG (bnc #558693)- fixed handling of dir:// and file:// (bnc #561855)- bind mount /var/run/dbus into chroot (bnc #519764)
* Mon Dec 14 2009 msAATTsuse.de- added parted to oemboot
* Mon Dec 14 2009 msAATTsuse.de- update kiwi-tools
* Mon Dec 14 2009 msAATTsuse.de- update kiwi-tools
* Mon Dec 14 2009 msAATTsuse.de- fixed password salt creation
* Mon Dec 14 2009 msAATTsuse.de- added kiwi-tools
* Mon Dec 14 2009 msAATTsuse.de- clean packs
* Mon Dec 14 2009 msAATTsuse.de- updated kiwi-tools packages
* Mon Dec 14 2009 msAATTsuse.de- fixed dump progress window
* Mon Dec 14 2009 mbarringerAATTsuse.de- Removing cross-platform support from the Qt imagewriter- Adding native Windows imagewriter
* Fri Dec 11 2009 msAATTsuse.de- update dcounter in kiwi-tools. Adding the option -l which allows to use dcounter in progress dialogs (dialog program)
* Fri Dec 11 2009 msAATTsuse.de- show disk size value in MB and only if > 0 (bnc #562190)- put install progress information into dialog (bnc #562185)- track restored files in percentage (bnc #562188)
* Fri Dec 11 2009 cwhAATTsuse.de- changed mkisofs parameters in KIWICollect.pm the way similar like autobuild did before- fixed mkisofs parameters for ia64- added ppc support to KIWIIsoLinux (KIWIIsoLinux-AppleFileMapping.txt is part of it)- added KIWIIsoLinux-AppleFileMapping.txt to spec file
* Fri Dec 11 2009 msAATTsuse.de- added adaptec-firmware to iso/net and oemboot (bnc #562224)
* Thu Dec 10 2009 msAATTsuse.de- use blowfish extension for password creation (bnc #562105)
* Thu Dec 10 2009 msAATTsuse.de- fixed storage of lvmgroup inside KIWIBoot object
* Thu Dec 10 2009 msAATTsuse.de- fixed boot label setup for installstick and installcd modus
* Thu Dec 10 2009 msAATTsuse.de- fixed condition for calling vgchange -an
* Wed Dec 09 2009 msAATTsuse.de- fixed install stick creation
* Wed Dec 09 2009 adrianAATTsuse.defix repomd creation code
* Wed Dec 09 2009 adrianAATTsuse.defix compare operator
* Wed Dec 09 2009 msAATTsuse.de- moved repartition functions to KIWILinuxRC
* Wed Dec 09 2009 msAATTsuse.de- fixed home device fstab entry, uses disk by id now
* Wed Dec 09 2009 ugAATTsuse.deimplementation of hybridpersistent key (bnc #557100)
* Wed Dec 09 2009 msAATTsuse.de- v3.85- fixed user/group setup for multiple users (bnc #561749)
* Wed Dec 09 2009 msAATTsuse.de- added information about repo solvable creation- fixed solvable creation if only one URL is used
* Tue Dec 08 2009 msAATTsuse.de- improved solvable caching code and added functions to KIWISatSolver module for extracting SaT informations about dependency and queueing problems
* Tue Dec 08 2009 msAATTsuse.de- adapt perl code to last changes in satsolver plugin
* Tue Dec 08 2009 msAATTsuse.de- fixed satsolver usage, pool_setarch is required for correct solving results. Also prune_best_arch_name_version() is now used instead of prune_to_best_arch
* Tue Dec 08 2009 adrianAATTsuse.dedrop the entire support for NO_ISO, since it is legacy and is not used anymore.
* Tue Dec 08 2009 adrianAATTsuse.deups, if statement should be in the opposite way around
* Mon Dec 07 2009 msAATTsuse.de- v3.84- fix syntax error when calling warning log function- backport content meta data generation out of product files from release packages
* Mon Dec 07 2009 adrianAATTsuse.deSupport content file creation via data from selected release packages and their specs inside of .prod file.
* Thu Dec 03 2009 msAATTsuse.de- v3.83- added busybox for to netboot descriptions and changed compressed tftp download to busybox tftp because only this implementations allows to work with pipes (bnc #559830)- removed 10.3 support
* Thu Dec 03 2009 msAATTsuse.de- fixed spec file provides/obsoletes
* Thu Dec 03 2009 msAATTsuse.de- dos2unix xsdDocHtml.css
* Thu Dec 03 2009 msAATTsuse.de- fixed boot device activation
* Thu Dec 03 2009 adrianAATTsuse.demove kiwi installation source plugins from novell forge. These plugins are needed to create product medias for openSUSE 11.1 and later. The 11.0 plugin has been dropped, since it never was in a working state.
* Wed Dec 02 2009 msAATTsuse.de- added support for custom LVM group name. Default is kiwiVG- fixed LVM based recovery workflow. the recovery needs to know about the separate boot partition. Additionally the recovery partition must be a separate partition outside LVM
* Wed Dec 02 2009 adrianAATTsuse.defix logging, not warnings for progress reporting.
* Tue Dec 01 2009 adrianAATTsuse.defail if a plugin dir is configured, but does not exist
* Mon Nov 30 2009 msAATTsuse.de- added options --fs-max-mount-count and --fs-check-interval as well as the XML type attribute fsnocheck which deactivates the filesystem check at all.
* Mon Nov 30 2009 msAATTsuse.de- fixed root device setup for xenboot in EC2 (bnc #559143)
* Mon Nov 30 2009 msAATTsuse.de- removed kernel-ec2-extra from xenboot, not needed (bnc #559106)
* Mon Nov 30 2009 msAATTsuse.de- v3.82- fixed size setup which was ignored due to last fix (bnc #559098)
* Thu Nov 26 2009 msAATTsuse.de- v3.81- call images.sh / config.sh scripts in POSIX env (bnc #558693)- fixed invalid link setup in createImageLiveCD() (bnc #558666)- fixed size / inode calcuation due to wrong unit (bnc #555688)
* Thu Nov 26 2009 adrianAATTsuse.defix call of warning method in KIWILog
* Wed Nov 25 2009 msAATTsuse.de- fixed setup of xencons when building Xen domU images (bnc #557791)
* Wed Nov 25 2009 msAATTsuse.de- fixed revision information in kiwi --version info- fixed Makefile clean target
* Tue Nov 24 2009 msAATTsuse.de- v3.80- fixed root tree creation build inconsistencies due to missing libraries at the beginning of the root tree creation. Any glibc linked program uses /etc/nsswitch.conf and from there requires /lib(64)/libnss
* libraries to do user/group to id resolution. If the operation happens chrooted, the libs needs to be there. The fix will install the glibc package which provides these libraries in a $root/baselibs directory first and moves them to $root. After that process the package manager is again called to install the bootstrap listed packages follewed by the rest of the specified packages (bnc #536256)
* Mon Nov 23 2009 msAATTsuse.de- v3.79- fixed clicfs boot by preventing root filesystem checks via ROOTFS_FSCK=\"0\", also don\'t use run-init for clic (bnc #557661)
* Thu Nov 19 2009 msAATTsuse.de- v3.78- fixed umount calls before init is called. Due to this fix the df information after login should be correct
* Wed Nov 18 2009 msAATTsuse.de- added openSUSE-11.2 target for migration (bnc #555724)
* Wed Nov 18 2009 msAATTsuse.de- v3.77- fixed search for gfxboot file du to changes in the gfxboot-devel package for 11.2 (bnc #556130)
* Tue Nov 17 2009 msAATTsuse.de- added LVM feature to allow parts of the filesystem in a separate volume. The setup of volumes happens in the new section
* Mon Nov 16 2009 msAATTsuse.de- update XML to 3.8
* Mon Nov 16 2009 msAATTsuse.de- v3.76- don\'t require preinit to call init (bnc #521456)
* Thu Nov 12 2009 msAATTsuse.de- remove pivot root calls (old code) and changed preinit handling to let preinit run like init. If preinit runs the kernel already knows the system image root as / and preinit always ends with exec init (bnc #521456)
* Wed Nov 11 2009 msAATTsuse.de- fixed exit code evaluation in Dialog function. The value of the evaluated exit code was undefined because it depended on which subshell finished first. The solution is to prevent parameter subshells when building the dialog parameterlist (bnc #547864)
* Mon Nov 09 2009 msAATTsuse.de- v3.75- fixed spec file for s390 architecture
* Fri Nov 06 2009 msAATTsuse.de- fixed sysconfig/kernel setup for old mkinitrd (bnc #547571)
* Fri Nov 06 2009 msAATTsuse.de- really removed windowmanager files
* Fri Nov 06 2009 msAATTsuse.de- really remove inittab files from examples
* Fri Nov 06 2009 msAATTsuse.de- fixed xslt processing. The possible change to the XML file is now written to /tmp to avoid writing into read-only filesystem (bnc #552617)
* Fri Nov 06 2009 msAATTsuse.de- removing displaymanager overlay files and use the baseUpdateSysConfig() function instead
* Fri Nov 06 2009 msAATTsuse.de- removing inittab overlay files and use baseSetRunlevel() instead
* Thu Nov 05 2009 adrianAATTsuse.deAnother place what broke the mkisofs sort file
* Thu Nov 05 2009 adrianAATTsuse.deFix sort file for mkisofs, fixes boot on crappy BIOSes.
* Thu Nov 05 2009 msAATTsuse.de- added support for timezone in JeOS- changed suseActivateDefaultServices() to activate services only without calling the post scripts of installed RPM\'s
* Wed Nov 04 2009 msAATTsuse.de- added missing usb host controller module (ohci) to all boot image descriptions except vmxboot which doesn\'t need it
* Tue Nov 03 2009 msAATTsuse.de- added Patches from Robert Schweikert
* added suse-min-gnome example image description
* Tue Nov 03 2009 msAATTsuse.de- removed 10.3 examples
* Tue Nov 03 2009 msAATTsuse.de- added Patches from Robert Schweikert
* change deploy section to pxedeploy section and update schemaversion from 3.7 to 3.8 via xsl stylesheet
* Tue Nov 03 2009 msAATTsuse.de- v3.75- added Patches from Robert Schweikert
* new function baseSetRunlevel to allow setup of runlevel in inittab
* Tue Nov 03 2009 msAATTsuse.de- added ieee1394 firewire modules to support liveCD on firewire DVD drive (bnc #479020)
* Mon Nov 02 2009 mantelAATTsuse.deonly basic version of vim is installed; we disable syntax highlighting in order to avoid irritating error message on vim startup.
* Wed Oct 28 2009 msAATTsuse.de- OEM recover/repair
* make sure passwd/shadow and group files will be preserved
* make sure RPM database will be preserved
* Wed Oct 28 2009 adrianAATTsuse.deuse true/false instead of yes/no to harmonize with rest of kiwi
* Wed Oct 28 2009 adrianAATTsuse.deuse yes/no in REPO_ONLY to harmonize with MULTIPLE_MEDIA
* Wed Oct 28 2009 adrianAATTsuse.deremove not used KIWI_COLLECT_TERMINAL_LOG enviroment variable, we use the --logfile switch since 11.1
* Wed Oct 28 2009 adrianAATTsuse.decleanup log states (lots of Warning -> Information) and drop obsolete code.
* Tue Oct 27 2009 msAATTsuse.de- fixed string comparison
* Tue Oct 27 2009 msAATTsuse.de- kiwi-instsource changes done by cooloAATTnovell.com
* fix 32bit debuginfos
* Tue Oct 27 2009 msAATTsuse.de- offer only languages for selection which are part of the initrd. The element defines which locales and translations are part of the initrd. If only one language is available no selection dialog will be opened
* Tue Oct 27 2009 cooloAATTsuse.defix 32bit debuginfos
* Tue Oct 27 2009 msAATTsuse.de- kiwi-instsource changes done by cooloAATTnovell.com
* fixed logging
* fixed several uninitialized variables
* fixed debuginfo handling
* Mon Oct 26 2009 cooloAATTsuse.deadd all debuginfo packages
* Mon Oct 26 2009 cooloAATTsuse.delittle cleanup
* Mon Oct 26 2009 cooloAATTsuse.dehave defaults for product variables
* Mon Oct 26 2009 cooloAATTsuse.demore fixes for logging
* Mon Oct 26 2009 cooloAATTsuse.deone less unintialized variable
* Mon Oct 26 2009 cooloAATTsuse.demore cleanup in the logging of products
* Mon Oct 26 2009 cooloAATTsuse.detrying to fix logging
* Mon Oct 26 2009 msAATTsuse.de- added missing config.sh script to strip down locale information
* Mon Oct 26 2009 msAATTsuse.de- added bug ID
* Mon Oct 26 2009 msAATTsuse.de- don\'t call ldconfig when loading KIWILinuxRC functions
* Mon Oct 26 2009 msAATTsuse.de- better changelog entry
* Fri Oct 23 2009 msAATTsuse.de- set splash to verbose if there is a systemException (bnc #547821)- check for block device when retrieving MBR ID (bnc #547821)
* Fri Oct 23 2009 msAATTsuse.de- added DOBACKUP variable to easily switch on/off the backup creation in recovery mode (bnc #546057)
* Thu Oct 22 2009 msAATTsuse.de- recovery mode (bnc #546057):
* throw reboot exception if backup files can\'t be created
* create backup files for files in recovery.tar.gz only
* Wed Oct 21 2009 msAATTsuse.de- use cmp to compare files first before diffing them. Prevent second find call for backup files. This increases the recovery performance in repair mode. Additionally write backup diffs to /tmp/backup (bnc #546057)
* Tue Oct 20 2009 msAATTsuse.de- added support for lang and keytable in cmdline. Support is only available with the gfxboot code from >= 11.2 (bnc #547915)- changed fbiterm return code evaluation. Echo the return code from the last instead of relying to the exit code of the fbiterm terminal (bnc #547864)
* Mon Oct 19 2009 msAATTsuse.de- search .backup files in home and etc only (bnc #546057)
* Fri Oct 16 2009 mbarringerAATTsuse.deAdd changelog message to kiwi.changes
* Fri Oct 16 2009 mbarringerAATTsuse.deFixing bug 547143 - kiwi imagewriter needs .iso filetype filter too
* Wed Oct 14 2009 msAATTsuse.de- don\'t remove libgcc_s from initrd. It\'s required for programs which uses pthread_cancel()
* Wed Oct 14 2009 msAATTsuse.de- prevent automatic CD eject on kiwi install. If the tray is blocked (some servers hide their drives behind doors) the boot CD/DVD with the OEM image ends up back in the machine. Therefore we open a popup window asking to user to remove the install media before continuing
* Tue Oct 13 2009 msAATTsuse.de- added udevPending call in waitForUSBDeviceScan() to make sure the device nodes are created if we leave the function
* Mon Oct 12 2009 msAATTsuse.de- fixed clicfs usage for vmx,oem and usbboot. Needs the same boot partition like the DM squash setup uses- fixed clicfs mount on bootvm creation
* Mon Oct 12 2009 msAATTsuse.de- fixed error log switch in Echo function
* Mon Oct 12 2009 msAATTsuse.de- fixed hwclock and timezone setup (bnc #546096)- fixed 11.2 JeOS template, no kernel-
*-base anymore
* Thu Oct 08 2009 msAATTsuse.de- deactivate backup MBR at 0x800 (bnc #539505)
* Thu Oct 08 2009 msAATTsuse.de- leave time message in kiwi.log file
* Thu Oct 08 2009 msAATTsuse.de- update schema documentation
* Thu Oct 08 2009 msAATTsuse.de- fixed setup of doc exclusion for zypper (bnc #544874)- added boot timer for kiwi boot images like the kernel does
* Thu Oct 08 2009 msAATTsuse.de- added kiwi-rpmlintrc filter for boot translations- fixed css file encoding in documentation- update kiwi-tools in sle11 repo
* Thu Oct 08 2009 msAATTsuse.de- added boot timer for kiwi boot images like the kernel does
* Wed Oct 07 2009 msAATTsuse.de- improved umount code for auto mount of removable storage devices. The function umountDevice() takes over the task of umounting all filesystems associated with the given device- use searchBIOSBootDevice for usbboot instead of USBStickDevice since we have the unique MBR ID in place this is the better method to search for the boot device
* Wed Oct 07 2009 msAATTsuse.de- create backup files for /etc and /home only in Recovery mode This is done to reduce the runtime the recovery process takes
* Tue Oct 06 2009 msAATTsuse.de- fixed race condition in waitForStorageDevice()- deactivate automatic filesystem check for clicfs based livesystems
* Tue Oct 06 2009 msAATTsuse.de- Add cancel/reboot menu item in recovery bootloader configuration. This will help avoid accidental recovery invocation, which could be a potential issue. The cancel/reboot item is now the default selection, and the delay is now 30 seconds giving the user more time to contemplate their restoration options (bnc #544420)
* Mon Oct 05 2009 msAATTsuse.de- fixed old X11R6 lib/lib64 path
* Mon Oct 05 2009 msAATTsuse.de- again fixed stripUnusedLibs()
* Mon Oct 05 2009 msAATTsuse.de- moved destination path check to function where it is needed
* Mon Oct 05 2009 msAATTsuse.de- fixed race condition in setupRecoveryArchive() when creating the tar archive- fixed fbiterm support for SLE10- fixed baseStripUnusedLibs
* Mon Oct 05 2009 msAATTsuse.de- added and improved official JeOS templates to the kiwi git source tree. The official templates used by the SDK product and the SuSE Studio online service are now provided via the kiwi package kiwi-templates (bnc #521970)
* Mon Oct 05 2009 msAATTsuse.de- fixed OEM bool option handling
* Mon Oct 05 2009 msAATTsuse.de- fixed detection of USB install media
* Mon Oct 05 2009 msAATTsuse.de- added import attribute in section to allow default imports if not profile was set on the commandline
* Fri Oct 02 2009 msAATTsuse.de- fixed handling of profiled preferences sections
* Fri Oct 02 2009 msAATTsuse.de- fixed bool value evaluation in KIWIXML.pm::get
*()- added suseImportBuildKey() helper function used in JeOS templates (bnc #521970)
* Thu Oct 01 2009 msAATTsuse.de- added support for , default ID=83 (bnc #543118)- reload MBR in restore mode, also recreate swap and home systems if defined in restored fstab (bnc #542648)
* Thu Oct 01 2009 msAATTsuse.de- fixed stick detection if multiple sticks are plugged in stickFound variable was set too early, thanks to Axel Theilmann- use bc for more exact progress calculation
* Thu Oct 01 2009 msAATTsuse.de- clear screen after install confirmation
* Wed Sep 30 2009 msAATTsuse.de- oemboot: re-install grub bootloader into partition if the partition contains a bootloader signature already (bnc #543123)- added backup diff in recovery mode. This will add a file~ diff file for each file changed according to the recovery contents.
* Tue Sep 29 2009 msAATTsuse.de- improved restore feature which also restores the filesystem before restoring files (bnc #542648)
* Mon Sep 28 2009 msAATTsuse.de- fixed typos and mistakes in the documentation, Thanks to Robert who found them
* Thu Sep 24 2009 msAATTsuse.de- limit language selection to the installed locales (bnc #539398)
* de_DE.utf8
* en_US.utf8
* ru_RU.utf8
* zh_CN.utf8
* zh_TW.utf8
* Thu Sep 24 2009 msAATTsuse.de- added language translations (ar,tr,uk) (bnc #539398)
* Wed Sep 23 2009 msAATTsuse.de- added language translations (bnc #539398)
* Wed Sep 23 2009 msAATTsuse.de- evaluate languages set by in the suseGFXBoot code. This will result in grub displaying the selected languages
* Tue Sep 22 2009 msAATTsuse.de- added i18n support for dialog buttons too
* Mon Sep 21 2009 msAATTsuse.de- fixed %1 evaluation in getText
* Mon Sep 21 2009 msAATTsuse.de- fixed LANG and locale use
* Mon Sep 21 2009 msAATTsuse.de- added OEM restore mode (bnc #539390)- evaluate kiwikernelmodule variable from cmdline also in modules.order mode where loading is done by udev (bnc #525345)- don\'t remove libblkid1 from initrd (bnc #505580)- remove reserved blocks in any case when mounting clic by calling tune2fs -m 0 (bnc #505580)
* Sun Sep 20 2009 msAATTsuse.de- preserve ownership if xsltproc changes the xml file
* Fri Sep 18 2009 msAATTsuse.de- added pot template for translations (bnc #539398)
* Thu Sep 17 2009 msAATTsuse.de- added fbiterm to oemboot boot images. This allows to display wide screen characters on the framebuffer console and therefore enabled kiwi\'s dialog windows to be multilingual (bnc #539398)- fixed baseStripLocales() function
* Wed Sep 16 2009 msAATTsuse.de- fixed MBR flag setup (bnc #539505)
* Wed Sep 16 2009 msAATTsuse.de- fixed bool value evaluation for oem-recovery
* Wed Sep 16 2009 msAATTsuse.de- added backup MBR to 0x800 if --grub-chainload is in use also added FDST flag to 0x190 for preload setup. We need to take care for that value if other preloads requires something similar it should be an option (bnc #539505)
* Tue Sep 15 2009 msAATTsuse.de- added cross-directory-hard-link filter
* Tue Sep 15 2009 msAATTsuse.de- update xsl stylesheets
* Tue Sep 15 2009 msAATTsuse.de- fixed types in oem examples
* Tue Sep 15 2009 msAATTsuse.de- changed to schema version 3.7, add xsl stylesheet which automatically changes to the bool values true/false
* allow ensconce as packagemanager type
* fixed bool content for rpm-check-signatures
* Mon Sep 14 2009 msAATTsuse.de- fixed bool content for rpm-check-signatures
* Mon Sep 14 2009 msAATTsuse.de- allow ensconce as packagemanager type- fixed bool content for rpm-check-signatures- fixed inode calculation, needs integer result
* Sat Sep 12 2009 msAATTsuse.de- link files to create live ISO in createImageLiveCD() instead of moving them (bnc #412689)- do kiwi test mounts with readonly option (bnc #538355)- use option -J -f to call genisoimage (bnc #538390)
* Fri Sep 11 2009 msAATTsuse.de- disabled check for removable flag in USBStickDevice() function (bnc #535113)
* Fri Sep 11 2009 msAATTsuse.de- allow cmdline line overwrites only if the variable ALLOW_CMDLINE_OVERWRITE=yes is set in config. or config.default. By default no overwrites are allowed which should add an acceptable level of security (bnc #536309)
* Thu Sep 03 2009 msAATTsuse.de- allow NBDROOT to be set via kernel cmdline (bnc #536309)
* Thu Sep 03 2009 msAATTsuse.de- fixed satplugin getInstallList() function, did not allocate enough space to hold the package size. This causes the buffer overflow inside the binding. Also added the flags-D_FORTIFY_SOURCE=2 -fstack-protector to build the same binding binary as if kiwi is build inside the BS. Also fixed the spec file and removed the versioned requires of satsolver-tools (bnc #532894)
* Wed Sep 02 2009 msAATTsuse.de- fixed writeXML
* Wed Sep 02 2009 msAATTsuse.de- added encoding information to all templates- added log information about temporary XML changes for all modes of kiwi, removed the used xml output file
* Tue Sep 01 2009 msAATTsuse.de- fixed virtual disk creation with clicfs involved
* Tue Sep 01 2009 msAATTsuse.de- added option --grub-chainload which allows the virtual disk based images to chainload grub from partition one. This is required for some preload processes (bnc #529850)- changed filesystem detection by using blkid instead of a raw dump + file call. Related to (bnc #529850)- disabled partition table re-write for hybrid ISO\'s also see the comment in KIWIIsoLinux.pm
* Fri Aug 28 2009 msAATTsuse.de- fixed partition size check which failed if oem-systemsize was set but the disk was smaller than the configured size
* Thu Aug 27 2009 msAATTsuse.de- added release tag to sattools_version
* Wed Aug 26 2009 msAATTsuse.de- added support for parted in oem repartition code
* Wed Aug 26 2009 msAATTsuse.de- removed check for luks mapping in functions which are surely not called if the luks extension is used
* Tue Aug 25 2009 msAATTsuse.de- fixed grep call, only return code is of interest
* Tue Aug 25 2009 msAATTsuse.de- support new syslinux >= 3.82 format (bnc #530255)- added function dn to support linux device node name convention: Converts from partition name to disk name (bnc #529580)
* Tue Aug 25 2009 msAATTsuse.de- fixed bootloader title setup if multiple kernels are installed- restructured oem repartition code to allow use of parted. parted does not allow to create custom partition id\'s they are the result of a sequence of subsequently created partitions. parted implementation will follow soon- allow only bool (true/false) content for the oem-
* boolean attributes
* Fri Aug 21 2009 msAATTsuse.de- remove kernel-.
*-base from all boot image descriptions for suse-11.2. They don\'t exist anymore
* Thu Aug 20 2009 msAATTsuse.de- fixed spec file
* Thu Aug 20 2009 msAATTsuse.de- fixed boot default size setup (bnc #532371)- fixed KIWIBoot::getStorageSize function, use blockdev- fixed dialog input by calling setctsid before dialog
* Wed Aug 19 2009 msAATTsuse.de- fixed usb stick size check (bnc #532371)
* Wed Aug 19 2009 msAATTsuse.de- removed duplicate creation of read/write filesystem
* Tue Aug 18 2009 msAATTsuse.de- changed title for install media to \"Install/Restore ...\"
* Mon Aug 17 2009 msAATTsuse.de- added support for language selection in displayEULA function. The function now uses the same file names according to the licenses.tgz file. If no language specific license file could be found the function defaults to license.txt and if that file also doesn\'t exist it defaults to EULA.txt (bnc #530497)
* Fri Aug 14 2009 msAATTsuse.de- fixed main::mount() method, setup of umountStack was wrong now using mount destination for umount not source
* Fri Aug 14 2009 msAATTsuse.de- fixed isohybrid created partition table to be DOS compatible This means the first partition starts at sector 64
* Fri Aug 14 2009 msAATTsuse.de- update documentation, add information about LVM and repository priorities, differences between smart and zypper
* Thu Aug 13 2009 msAATTsuse.de- fixed typo
* Thu Aug 13 2009 msAATTsuse.de- convert schema css to unix file format
* Thu Aug 13 2009 msAATTsuse.de- update schema documentation
* Thu Aug 13 2009 msAATTsuse.de- provided new kiwi-tools for sles11 without pigz
* Thu Aug 13 2009 msAATTsuse.de- removed pigz from kiwi-tools, it\'s packaged and maintained by Alexander Graf now
* Thu Aug 13 2009 msAATTsuse.de- make rpm-force content a boolean value
* Wed Aug 12 2009 msAATTsuse.de- fixed waitForStorageDevice() check
* Wed Aug 12 2009 msAATTsuse.de- fixed fsck call for clicfs mount
* Wed Aug 12 2009 msAATTsuse.de- run fsck and resize2fs only on first boot of a clic mount- don\'t wait for storage device if it\'s a loop
* Wed Aug 12 2009 msAATTsuse.de- fixed VMFindSystem function in xenboot (bnc #530200)
* Tue Aug 11 2009 msAATTsuse.de- v3.74- use resize2fs -M if possible ( >= v1.41 )
* Tue Aug 11 2009 msAATTsuse.de- fixed bool value in documentation
* Tue Aug 11 2009 msAATTsuse.de- fixed foreign addPackage and addArchive calls, make sure the package/archive is added to the bootstrap section not to the image section as we can\'t guarantee that a type=\"image\" section exists- run tagmedia at last
* Tue Aug 11 2009 msAATTsuse.de- better text for used xml file
* Tue Aug 11 2009 msAATTsuse.de- v3.73- removed -extra kernel packages for 11.2, don\'t exist anymore- added desktop kernel profile too boot images for 11.2
* Tue Aug 11 2009 msAATTsuse.de- fixed getSize function to calculate required inode count for the subsequent mkfs ext2/3/4 call (bnc #528839)
* Mon Aug 10 2009 msAATTsuse.de- added ddn function and replace all occurrences of a=$disk\"number\" with a=$(ddn $disk number) (bnc #529580)
* Mon Aug 10 2009 msAATTsuse.de- added checkmedia KIWIIsoLinux constructor parameter
* Sun Aug 09 2009 adrianAATTsuse.decheck for existens of README.BETA file
* Sun Aug 09 2009 adrianAATTsuse.de
* Activate ISO creation for product medias by default.
* Add check for medias intended to be a ftp tree only (no iso)
* Do not ignore random errors anymore, but fail !
* cleanup of some return values, still way more to do
* Fri Aug 07 2009 msAATTsuse.de- v3.71- added --select packages for the --info option
* Fri Aug 07 2009 msAATTsuse.de- fixed loop between CDMount and searchBIOSBootDevice happening in oem ISO install mode
* Fri Aug 07 2009 msAATTsuse.de- added dialog based progress information when restoring the recovery archive files (bnc #510041)
* Fri Aug 07 2009 msAATTsuse.de- fixed evaluation of MKCLICFS_COMPRESSION (bnc #528743)
* Thu Aug 06 2009 msAATTsuse.de- clear screen after dialog window disappears (bnc #510041)
* Thu Aug 06 2009 msAATTsuse.de- v3.70- fixed HAVE_USB check, usbcore is no longer a module- added edd module to be present in isoboot
* Wed Aug 05 2009 msAATTsuse.de- fixed OEM_SYSTEMSIZE evaluation for standard and luks repart
* Wed Aug 05 2009 msAATTsuse.de- allow OEM_SYSMTEMSIZE evaluation for OEMRepartLuks
* Wed Aug 05 2009 msAATTsuse.de- v3.69- changed oem-repart to allow oem-systemsize even if no home and no swap partition was requested. by default the entire disk space is used but if a oem-systemsize is set this value will be used and therefore allows to have some space left on the disk- fixed loop cleanup
* Wed Aug 05 2009 msAATTsuse.de- wait for process to finish when sending int signal (bnc #525986)
* Tue Aug 04 2009 msAATTsuse.de- use dmsetup remove instead of kpartx -d
* Tue Aug 04 2009 msAATTsuse.de- add a sleep of one second between kpartx -d and losetup -d
* Tue Aug 04 2009 msAATTsuse.de- send signal again after 5 seconds, if the process still exists
* Tue Aug 04 2009 msAATTsuse.de- re-added clicfs ignore-cow-errors option
* Tue Aug 04 2009 msAATTsuse.de- add a sleep of one second between kpartx -d and losetup -d- wait for process to finish when sending interrupt signal (bnc #525986)- added support for hybrid ISO\'s. This feature exists with openSUSE 11.2 or later. In order to use it add the attribute hybrid=\"true\" to your iso type line. If you use the iso on a read/write medium the isoboot code will search for a 0x83 partition used for writing OS data (bnc #496505)
* Mon Aug 03 2009 msAATTsuse.de- added mediacheck feature for hybrid iso- use partition not disk to mount hybrid
* Mon Aug 03 2009 msAATTsuse.de- v3.68- added support for hybrid ISO\'s. This feature exists with openSUSE 11.2 or later. In order to use it add the attribute hybrid=\"true\" to your iso type line.
* Fri Jul 31 2009 msAATTsuse.de- fixed typo
* Fri Jul 31 2009 msAATTsuse.de- use blockdev to check partition and disk size (bnc #527016)
* Fri Jul 31 2009 msAATTsuse.de- v3.67- use #!/usr/bin/env vmware in .vmx config file
* Wed Jul 29 2009 msAATTsuse.de- fixed file finder for relative paths in createImageSplit
* Wed Jul 29 2009 msAATTsuse.de- fixed code box dimensions
* Wed Jul 29 2009 msAATTsuse.de- fixed solvable creation for migrate, also add the option --report-packlist. Updated docu chapter about migration
* Wed Jul 29 2009 msAATTsuse.de- deactivate mbr id check on oem install (bnc #525682)
* Wed Jul 29 2009 msAATTsuse.de- v3.66- update ec2 documentation, fixed public ari/aki table
* Mon Jul 27 2009 msAATTsuse.de- update documentation
* Mon Jul 27 2009 msAATTsuse.de- fixed build
* Mon Jul 27 2009 msAATTsuse.de- fixed build
* Mon Jul 27 2009 msAATTsuse.de- fixed build
* Mon Jul 27 2009 msAATTsuse.de- added suse-11.2-JeOS template
* Mon Jul 27 2009 msAATTsuse.de- removed obsolte tools/cdtool/suse-isolinux- fixed isoboot: added gfxboot.com if it exists
* Mon Jul 27 2009 msAATTsuse.de- leave libncursesw inside the initrd for dialog use
* Fri Jul 24 2009 msAATTsuse.de- v3.65- added waitForUSBDeviceScan() function and wait only if usbcore module could be loaded
* Thu Jul 23 2009 msAATTsuse.de- added cciss module to be part of the oem initrd
* Thu Jul 23 2009 msAATTsuse.de- fixed dumpkeys call in KIWIManager
* Mon Jul 20 2009 msAATTsuse.de- added displayEULA function (bnc #522985)
* Thu Jul 16 2009 msAATTsuse.de- added opensuseProduct in JeOS templates (bnc #522217)
* Thu Jul 16 2009 msAATTsuse.de- v3.64- fixed xenbridge network setup if bridge name is set to an empty string (bnc #515404)
* Wed Jul 15 2009 msAATTsuse.de- fixed satplugin due to satsolver api changes (bnc #521968)
* Wed Jul 15 2009 msAATTsuse.de- fixed JeOS SLE10 template
* Wed Jul 15 2009 msAATTsuse.de- openssl-certs does not exist on SLE10 changed to openssl
* Tue Jul 14 2009 msAATTsuse.de- added openssl-certs to bootstrap section of SLE JeOS and boot image templates to allow use of SLE update repositories
* Tue Jul 14 2009 msAATTsuse.de- added openssl-certs to bootstrap section of SLE JeOS templates to allow use of SLE update repositories
* Tue Jul 14 2009 msAATTsuse.de- fixed liveCD isolinux entry selection (bnc #521338)- removed required lib
* packages from delete sections- be verbose when removing files from the initrd
* Tue Jul 14 2009 msAATTsuse.de- added suseSetupProduct function (bnc #520268)
* Mon Jul 13 2009 msAATTsuse.de- set hal lock for mapped luks device- added support for luks extension for iso image type (bnc #505782)
* Mon Jul 13 2009 msAATTsuse.de- added support for luks extension for xen image type (bnc #505782)
* Mon Jul 13 2009 msAATTsuse.de- added support for luks extension for usb image type (bnc #505782)
* Mon Jul 13 2009 msAATTsuse.de- added comments for luks boot setup
* Mon Jul 13 2009 msAATTsuse.de- fixed ram only netboot image download (bnc #519055)
* Thu Jul 09 2009 msAATTsuse.de- v3.63- make luks password dialog more user friendly- update schema documentation
* Wed Jul 08 2009 msAATTsuse.de- added check for packages really on media when using fallback KIWIPattern resolver (bnc #517506)
* Wed Jul 08 2009 msAATTsuse.de- fixed luksboot link
* Wed Jul 08 2009 msAATTsuse.de- fixed bootloader setup for luks mode- fixed default split file
* Tue Jul 07 2009 msAATTsuse.de- added support for luks extension for oem image type- fixed CD eject in oem CD/DVD install mode
* Mon Jul 06 2009 msAATTsuse.de- fixed block comment
* Sun Jul 05 2009 msAATTsuse.de- v3.62- fixed combined mount with luks encoded read-write part
* Sun Jul 05 2009 msAATTsuse.de- fixed combined mount with luks encoded read-write part
* Fri Jul 03 2009 msAATTsuse.de- added basic support for LUKS extension for vmx image type with compressed root filesystem.
* Thu Jul 02 2009 msAATTsuse.de- use --passwordbox instead of --inputbox to ask for the luks passphrase
* Thu Jul 02 2009 msAATTsuse.de- added basic support for LUKS extension for vmx image type
* Wed Jul 01 2009 msAATTsuse.de- v3.61- prepared KIWIImage to work with luks extension. This is not a complete implementation so far, just a first start (bnc #505782)- fixed inclusion of custom tar archives if the image description provides only a bootstrap section like the isoboot data does
* Wed Jun 24 2009 msAATTsuse.de- allow inclusion of custom tar archives with new element. This can be used to include custom branding without special branding packages. This can also be used to include any kind of data without the need for a package (bnc #515573)
* Wed Jun 24 2009 msAATTsuse.de- the inode issue comes back to haunt us yet again. The last go around actually made things
*worse
* for things like vmdk that allocate large disks, since 2x the number of files is probably much smaller than the \'automatic\' calculation used for a disk of that size. The attached patch fixes this by removing the--fs-numinodes option (which is useless, IMHO) and replaces it with --fs-inoderatio. Kiwi will assume 16k for inode ratio if not otherwise specified. We use the ratio to determine the number of inodes, unless it is a smaller value than num_files
*2.
* Tue Jun 23 2009 msAATTsuse.de- fixed typo
* Tue Jun 23 2009 msAATTsuse.de- more virtio modules
* Tue Jun 23 2009 msAATTsuse.de- update docs, --list-profiles moved to --info ... --select profiles
* Tue Jun 23 2009 msAATTsuse.de- added virtio kernel modules to boot iamges (bnc #515543)
* Tue Jun 23 2009 msAATTsuse.de- improved support for obtaining XML information (bnc #513093)
* Mon Jun 22 2009 msAATTsuse.de- don\'t remove mkfs/fsck links, just a cleanup fix
* Mon Jun 22 2009 msAATTsuse.de- v3.60- don\'t remove libx
*, 11.2 hwinfo is linked against libx86emu
* Fri Jun 19 2009 msAATTsuse.de- v3.59- fixed journal parameter handling in setupEXT2
* Fri Jun 19 2009 msAATTsuse.de- fixed clone to search in default image path if source is specified as relative path
* Fri Jun 19 2009 msAATTsuse.de- fixed checkType function if flags and filesystem attributes are used together. Using these attributes together in one type is redundant and therefore not correct but it should not lead to an error (bnc #514412)- removed useless setValidateRepositoryType method- add support for xml file logging. This allows to keep track on the temporary changes kiwi makes in the XML description caused by for example commandline options
* Fri Jun 19 2009 msAATTsuse.de- fixed clean target
* Fri Jun 19 2009 msAATTsuse.de- fixed clean target
* Thu Jun 18 2009 msAATTsuse.de- combine manual pages and kiwi cookbook into one
* Wed Jun 17 2009 pschinaglAATTsuse.de- updated documentation files
* Wed Jun 17 2009 pschinaglAATTsuse.de- adding man pages to kiwi.pdf using joinPDF
* Wed Jun 17 2009 pschinaglAATTsuse.deCreate pdfs from the man pages and append it to the kiwi.pdf
* Wed Jun 17 2009 pschinaglAATTsuse.deChanged refentrytitle to filename
* Wed Jun 17 2009 msAATTsuse.de- fixed clicfs mount for pxe type (bnc #513826)
* Wed Jun 17 2009 pschinaglAATTsuse.deNew chapter appendix as intropage for the man-pages
* Wed Jun 17 2009 pschinaglAATTsuse.deAdded chapter appendix
* Wed Jun 17 2009 pschinaglAATTsuse.deset tocdepth to 2 to show new subsections and added an appendix chapter
* Wed Jun 17 2009 pschinaglAATTsuse.deAdded subsections for the elements of config.xml
* Tue Jun 16 2009 msAATTsuse.de- v3.58- added -persist option when calling nbd-client (bnc #513112
* Wed Jun 10 2009 msAATTsuse.de- fixed test case
* Wed Jun 10 2009 msAATTsuse.de- fixed kernel/initrd links in setupSUSEInitrd (bnc #507261)
* Wed Jun 10 2009 msAATTsuse.de- fixed use of mke2fs options
* Wed Jun 10 2009 msAATTsuse.de- fixed SLE11 template iso type
* Wed Jun 10 2009 msAATTsuse.de- fixed setRepository function so that it does not overwrite repositories marked with status=\"fixed\"
* Wed Jun 10 2009 msAATTsuse.de- call searchBIOSBootDevice only on initial deployment if the kiwi initrd is still in place for a subsequent boot use the root variable from the kernel commandline to find the boot disk, related to (bnc #507261)
* Tue Jun 09 2009 msAATTsuse.de- added list of available patterns for --list-xmlinfo
* Tue Jun 09 2009 msAATTsuse.de- added getSolfile method to be able to access the cached satsolver index file
* Tue Jun 09 2009 msAATTsuse.de- fixed url list update when --add-repo is used
* Tue Jun 09 2009 msAATTsuse.de- fixed kiwi --list-xmlinfo if repo doesn\'t exist
* Tue Jun 09 2009 msAATTsuse.de- fixed typo
* Tue Jun 09 2009 msAATTsuse.de- v3.57- added support for ext4 filesystem, adapt 11.2 examples- adapt 11.2 boot images for ext4
* Mon Jun 08 2009 msAATTsuse.de- fixed dom0 Xen setup
* Fri Jun 05 2009 msAATTsuse.de- v3.56- fixed missing xen bootprofile in vmx and oem (bnc #510276)- added ec2 bootkernel profile for vmx,oem,xen (bnc #510276)
* Thu Jun 04 2009 msAATTsuse.de- fixed call of xsl stylesheet in kiwi.pl
* Thu Jun 04 2009 msAATTsuse.de- default to \"no\" when the recovery dialog is displayed
* Wed Jun 03 2009 msAATTsuse.de- moved schemeversion to schemaversion (bnc #509107)
* Tue Jun 02 2009 msAATTsuse.de- moved element into the section added xsl stylesheet for transformation from scheme version 2.4 -> 3.5 according to this change. Always compress cpio images (bnc #509107)
* Tue Jun 02 2009 msAATTsuse.de- fixed checkmedia reboot to happen immediately (bnc #509061)- fixed checkmedia message (bnc #509060)
* Tue Jun 02 2009 mattAATTsuse.de- Use O_LARGEFILE on the output open call as well
* Tue Jun 02 2009 mattAATTsuse.de- Use O_LARGEFILE when opening an image in imagewriter
* Mon Jun 01 2009 msAATTsuse.de- fixed documentation for bool value use (bnc #508614)
* Sun May 31 2009 msAATTsuse.de- v3.55- allow use of zypper iso:// URL type in kiwi (bnc #498437)
* Fri May 29 2009 mbarringerAATTsuse.deGive the user more feedback when the imagewriter cannot open a file.
* Thu May 28 2009 msAATTsuse.de- check for iso tool in KIWIIsoLinux.pm (bnc #478991)- removed redundand relocateCatalog code, use the one from KIWIIsoLinux only
* Thu May 28 2009 msAATTsuse.de- added kiwi --clone mode (bnc #505554)
* Wed May 27 2009 msAATTsuse.de- v3.54- added fix catalog function to KIWIIsoLinux.pm (bnc #478991)- set inode count for system partition only, even if it has been specified via --fs-maxinodes (bnc #495135)- fixed OEM recovery, set OEM_RECOVERY to the root device not the recovery device (bnc #503653)
* Tue May 26 2009 msAATTsuse.de- fixed oem format=\"iso\" install mode (bnc #506983)- use dialog for asking questions (bnc #503653)
* Mon May 25 2009 msAATTsuse.de- added resize_inode feature to filesystem before resizing. This will reserve space so the block group descriptor table may grow in the future (bnc #498683)
* Mon May 25 2009 msAATTsuse.de- fixed clicfs mount, regression from my nfs fix
* Fri May 22 2009 msAATTsuse.de- don\'t reserve blocks for clicfs without cow (bnc #505580)
* Fri May 22 2009 msAATTsuse.de- reset IFS to standard value in CDDevice (bnc #505943)
* Fri May 22 2009 msAATTsuse.de- added relocation function to KIWIIsoLinux module
* Fri May 22 2009 msAATTsuse.de- rewrote KIWIIsoLinux.pm to allow bit/tri arch boot media the code has not been tested for efi or ikr due to lack of such machines (bnc #478991)
* Fri May 22 2009 msAATTsuse.de- fixed typo in volid assignment
* Tue May 19 2009 msAATTsuse.de- fixed/changed clicfs over NFS use. When using a clicfs image it\'s required that the clicfs filesystem is mounted on the server and the container (fsdata.ext3) is exported to the client. In that way it\'s consistent with all other filesystem types
* Tue May 19 2009 msAATTsuse.de- set default volid for CD/DVD kiwi install media
* Tue May 19 2009 msAATTsuse.de- fixed volid setup in case of format=iso setup (bnc #500501)
* Tue May 19 2009 msAATTsuse.de- fixed typo
* Tue May 19 2009 msAATTsuse.de- fixed volid setup in case of spaces (bnc #500501)
* Tue May 19 2009 msAATTsuse.de- fixed doc hint for boot-theme
* Tue May 19 2009 msAATTsuse.de- update documentation for bootinclude/bootdelete and boot-theme setup- implement setup
* Mon May 18 2009 msAATTsuse.de- v3.52- fixed clicfs mount over AOE,NBD (bnc #504652)- allow inclusion of boot image packages specified inside the system image description. This feature is used to setup branding packages which needs to be installed as part of the boot image (initrd) (bnc #497888)
* Fri May 15 2009 msAATTsuse.de- v3.51- set keytable to us in template files (bnc #504275)- fixed live iso examples (bnc #504283)
* Wed May 13 2009 msAATTsuse.de- fixed group setup with correct group id (bnc #503117)
* Wed May 13 2009 msAATTsuse.de- added bugid for spec file fix- copy hidden files to home in oemboot code
* Wed May 13 2009 msAATTsuse.de- fixed spec file
* Tue May 12 2009 msAATTsuse.de- indentation fix
* Tue May 12 2009 msAATTsuse.de- make use of new clicfs options for persistent writes
* Tue May 12 2009 msAATTsuse.de- fixed spec file requirement for mkisofs on sle10
* Tue May 12 2009 adrianAATTsuse.deensure that images.sh and config-cdroot.sh have execute permissions as well.
* Tue May 12 2009 adrianAATTsuse.deensure that config.sh can get executed, even when it comes without execute permissions
* Fri May 08 2009 msAATTsuse.de- added optional volid setup for iso\'s (bnc #500501)- update scheme documentation from oXygen
* Thu May 07 2009 msAATTsuse.de- don\'t set config file when calling modprobe in suseStripKernel function- use 70% of RAM for clicfs
* Thu May 07 2009 msAATTsuse.de- validate MKCLICFS_COMPRESSION if set- fixed tool hash for flags=\"clic\"- added free RAM value for clicfs mount instead of fixed size of 470M
* Wed May 06 2009 msAATTsuse.de- fixed sap media changer call (bnc #486758)- added more clic fixes, still not finished (bnc #497172)- set inode count for system partition only (bnc #495135)- fixed satsolver setup
* Tue May 05 2009 msAATTsuse.de- 3.50- added bash quotation function (bnc #500537)
* Tue May 05 2009 msAATTsuse.de- more clicfs fixes- fixed quotation of home and groups for user setup (bnc #500537)- fixed system reboot if kiwi initrd is still in place
* Tue May 05 2009 msAATTsuse.de- v3.49- added clic fixes from coolo (bnc #497172)- fixed quotation of realname for user setup (bnc #500537)- fixed activateBootPartition code (bnc #500454)
* Tue May 05 2009 msAATTsuse.de- fixed quotation of realname for user setup (bnc #500537)- update documentation
* Mon May 04 2009 msAATTsuse.de- allow setting up vga for iso images too (bnc #480336)
* Mon May 04 2009 msAATTsuse.de- need eval to pass options to the mount call
* Mon May 04 2009 msAATTsuse.de- detect if it is required to pass -t iso9660 (bnc #498497)
* Mon May 04 2009 msAATTsuse.de- fixed permissions on recovery (bnc #489909)
* Mon May 04 2009 msAATTsuse.de- added support for clicfs for suse >= 11.2 (bnc #497172)
*
*
* not fully implemented and tested yet
*
*
*- don\'t run path generation for iso:// and file:// paths if zypper is used (bnc #498437)
* Wed Apr 29 2009 msAATTsuse.de- fixed initrd cpio if xen type is requested (bnc #399230)
* Wed Apr 29 2009 msAATTsuse.de- fixed template xorg.conf for 64 bit
* Mon Apr 27 2009 msAATTsuse.de- v3.47- added kernel parameter nombridcheck (bnc #498371)- remove boot/grub/mbrid file from installed system at first deployment to avoid conflicts on reboot- set boot flag after repartitioning the device- exclude install source device from being used as SAP data storage device
* Fri Apr 24 2009 msAATTsuse.de- fixed format image creation for split type (bnc #497882)- use -x option when copying system tree to avoid copying still mounted filesystems like proc for example (bnc #497984)
* Fri Apr 24 2009 msAATTsuse.de- v3.46- pass -t iso9660 when mounting CD/DVD devices. It\'s a kernel bug that slows down the bandwidth if not passing that value but the workaround is rock solid :) (bnc #493201)
* Thu Apr 23 2009 msAATTsuse.de- prevent usb and storage modules from beeing loaded directly
* Thu Apr 23 2009 msAATTsuse.de- don\'t reboot the system after OEMInstall, simply proceed
* Thu Apr 23 2009 msAATTsuse.de- fixed kiwi_revision content in .profile- fixed LVM repartition code if more than one VG exist
* Wed Apr 22 2009 msAATTsuse.de- deacticate the bios 0x80 check it\'s not safe enough- allow non interactive installation procedure in oem-sap-install mode. In case of multiple disks the smallest one is used for the system (bnc #486758)
* Wed Apr 22 2009 msAATTsuse.de- activate volume groups before calling mkinitrd
* Wed Apr 22 2009 msAATTsuse.de- restrict packagemanager names to smart and zypper
* Wed Apr 22 2009 msAATTsuse.de- fixed filesystem detection if root is on LVM
* Wed Apr 22 2009 msAATTsuse.de- fixed fstab setup of sapdata volume
* Wed Apr 22 2009 msAATTsuse.de- added ovftool patch required for tech. preview
* Wed Apr 22 2009 msAATTsuse.de- fixed bootpartition id for install image creation
* Wed Apr 22 2009 msAATTsuse.de- v3.44- fixed size of boot image partition when creating an install image of type: virtual disk
* Tue Apr 21 2009 msAATTsuse.de- added missing entries in sysconfig/bootloader (bnc #495909)
* Tue Apr 21 2009 msAATTsuse.de- let udev load modules if modules.order is provided by the kernel (bnc #493201)
* Mon Apr 20 2009 msAATTsuse.de- added bool content type instead of text for rpm-excludedocs (bnc #496382)
* Mon Apr 20 2009 msAATTsuse.de- fixed identifyFileSystem call
* Mon Apr 20 2009 msAATTsuse.de- make sure DHCPHADDR is an uppercase value (bnc #495557)- fixed probeFileSystem to take care if the first 512byte contains a bootloader (bnc #493489)- fixed multicast activation/deactivation (bnc #356974)- also check for include link to use --dereference when copying the overlay tree (bnc #490128)
* Mon Apr 20 2009 msAATTsuse.de- fixed recovery device setup (bnc #493878)
* Tue Apr 07 2009 adrianAATTsuse.defix mkpath calls for current perl
* Mon Apr 06 2009 msAATTsuse.de- removed cromfs doesn\'t exist in 11.2
* Fri Apr 03 2009 msAATTsuse.de- fixed SAP data VG creation
* Fri Apr 03 2009 msAATTsuse.de- fixed SAP data storage setup if there is already a VG
* Fri Apr 03 2009 msAATTsuse.de- fixed SAP storage check and data storage setup
* Fri Apr 03 2009 msAATTsuse.de- v3.41- fixed URL quoting when passing credentials (bnc #491475)
* Thu Apr 02 2009 msAATTsuse.de- doc revision update
* Thu Apr 02 2009 msAATTsuse.de- fixed xen config creation for bootprofile=xen and image type vmx
* Wed Apr 01 2009 msAATTsuse.de- update man pages (variable names)- leave gawk for oem images
* Tue Mar 31 2009 msAATTsuse.de- fixed IFS setup for SAP functions
* Tue Mar 31 2009 msAATTsuse.de- fixed typo
* Tue Mar 31 2009 msAATTsuse.de- v3.40- update manual pages. Patch by Peter Schinagl - added functions to run X inside preinit (bnc #486758)
* Tue Mar 31 2009 msAATTsuse.de- added SAPDataStorageSetup function (bnc #486758)
* Mon Mar 30 2009 msAATTsuse.de- added check functions SAPMemCheck, SAPCPUCheck and SAPStorageCheck. They apply if the oem-sap-install attribute is set for OEM images (bnc #486758)
* Mon Mar 30 2009 msAATTsuse.de- leave libcom_err in isoboot
* Mon Mar 30 2009 msAATTsuse.de- v3.39- added a xendomain attribute in config.xml to be able to distinguish whether a virtual disk image should be a Xen dom0 host system or a Xen domU guest system. If no domain is set a dom0 image will be created- added xenServer function to check if we run a Xen host or guest system. The bootloader setup is different for dom0 or domU. Adapt setupBootLoader
* functions- allow filesystem resizing to be used in isoboot
* Fri Mar 27 2009 msAATTsuse.de- fixed xencons setup for lilo and syslinux
* Fri Mar 27 2009 msAATTsuse.de- added support for virtual disk images as Xen guest. This means you can specify vmx|oem and the resulting virtual disk image can boot as Xen guest system. Patch by James Willcox
* Fri Mar 27 2009 msAATTsuse.de- v3.38- added root fstab entry for compressed rootfs (bnc #486017)- fixed console setup when booting into a Xen guest
* Thu Mar 26 2009 msAATTsuse.de- really allow oem-reboot to take effect in recovery mode (bnc #487887)
* Thu Mar 26 2009 msAATTsuse.de- v3.37- added squashfs requirement for suse version > 10.1- fixed solvable creation for repos without compressed meta data (packages and .pat file)
* Wed Mar 25 2009 msAATTsuse.de- fixed build
* Wed Mar 25 2009 msAATTsuse.de- v3.36- allow oem-reboot to take effect in recovery mode (bnc #487887)- improved the --list-xmlinfo option which now also prints information about the repositories used for the image and it will print out the install size in kB by using the satsolver. Users can so check how much space is required to build the root tree of the image
* Wed Mar 25 2009 msAATTsuse.de- added compuled man pages
* Wed Mar 25 2009 msAATTsuse.de- add --dest-dir check when --build runs- fixed checkType function for iso tool check- include xml man page source to git- update template descriptions
* Tue Mar 24 2009 msAATTsuse.de- add --dest-dir check when --build runs- update template descriptions
* Mon Mar 23 2009 mbarringerAATTsuse.deChecking in change allowing \"-m\" option to maximize the imagewriter window
* Mon Mar 23 2009 msAATTsuse.de- removed KIWICollect_local.pm and also the --instsource-local option from the code base. This module is no longer maintained and all code related to this path went into KIWICollect.pm
* Mon Mar 23 2009 msAATTsuse.de- better changelog entry for last zypper repo prio fix
* Mon Mar 23 2009 msAATTsuse.de- fixed build, KIWICollect_local has been removed
* Mon Mar 23 2009 adrianAATTsuse.deobsolete second version of instsource module
* Mon Mar 23 2009 msAATTsuse.de- v3.35- added support for repo priority for zypper
* Mon Mar 23 2009 adrianAATTsuse.deadd support for repository priorities with zypper
* Mon Mar 23 2009 adrianAATTsuse.deadd support for priority ordering of repositories
* Fri Mar 20 2009 msAATTsuse.de- fixed documentation changed wording from exten(d|t) to unpacked and package image
* Thu Mar 19 2009 msAATTsuse.de- really fixed this path handling in upgrade mode
* Thu Mar 19 2009 msAATTsuse.de- again fixed build script
* Thu Mar 19 2009 msAATTsuse.de- fixed build tools
* Thu Mar 19 2009 msAATTsuse.de- added suse-SLE10-JeOS template
* Thu Mar 19 2009 msAATTsuse.de- v3.34- fixed ignore element validation- added suse-SLE10-JeOS template
* Tue Mar 17 2009 mbarringerAATTsuse.deTrying to commit the MacOS port again
* Tue Mar 17 2009 mbarringerAATTsuse.deLast commit failed for some reason
* Tue Mar 17 2009 mbarringerAATTsuse.deFinished the MacOS X port
* Tue Mar 17 2009 msAATTsuse.de- added support for arch attribute in pattern names
* Tue Mar 17 2009 msAATTsuse.de- adapt ppc netboot descriptions
* Tue Mar 17 2009 msAATTsuse.de- v3.33- removed support for cromfs; dead and unmaintained fs- added bootkernel attribute which allows to select a kernel profile defined in the boot image description
* Mon Mar 16 2009 msAATTsuse.de- v3.32- changed netboot descriptions >= 11.1 to provide diskless kernel profiles named diskless-kdefault and diskless-kpae. The standard diskless profile will no longer include a kernel
* Mon Mar 16 2009 msAATTsuse.de- fixed oemboot workflow for dmsquash setup
* Mon Mar 16 2009 msAATTsuse.de- fixed oemboot workflow for dmsquash setup
* Mon Mar 16 2009 msAATTsuse.de- v3.31- fixed broken CD/DVD mount path in isoboot workflow- fixed vmxboot workflow for dmsquash setup- fixed oemboot workflow for dmsquash setup- fixed usbboot workflow for dmsquash setup
* Thu Mar 12 2009 msAATTsuse.de- v3.30- added warning message before installing system (bnc #484793)
* Thu Mar 12 2009 msAATTsuse.de- v3.29- added cdrkit-cdrtools-compat required for kiwi-desc-oemboot- added experimental support for dmsquash filesystem type which is a squashfs filesystem containing an ext3 filesystem. The mount of the data happens via a device-mapper snapshot and allows copy-on-write access (bnc #483444)- fixed install image size calculation in case of a compressed image. gzip -l was used but we ran into the >4GB bug mentioned in the gzip manpage (bnc #484247)
* Tue Mar 10 2009 msAATTsuse.de- v3.28- added crc-t10dif kernel module for 11.2 boot- added x-bit to vmware .vmx file generated by kiwi- don\'t use arch specific glibc in boot images- don\'t specify cracklib but remove all possibly installed versions in boot images
* Mon Mar 09 2009 msAATTsuse.de- fixed build helper tools according to svn -> git switch