Changelog for mdadm-debuginfo-3.2.6-3.4.1.x86_64.rpm :

* Thu Jun 13 2013 nfbrownAATTsuse.com- assemble-EXCL-race.fix: avoid some races during array assembled- particularly at boot (bnc#793954)- boot.md: make sure systemd-udev-trigger runs before boot.md to avoid races: bnc#793954- 0001-Add-support-for-launching-mdmon-via-systemctl-instea.patch 0002-In-case-launching-mdmon-fails-print-an-error-message.patch 0003-mdmon-add-foreground-option.patch 0004-Suppress-error-messages-from-systemctl.patch mdmonAATT.service - new file plus patches to allow mdmon to be started by systemd, so systemd doesn\'t kill it (bnc#821366)
* Sun Nov 04 2012 crrodriguezAATTopensuse.org- Fix factory breakage on udev and systemd rules.
* Thu Oct 25 2012 nfbrownAATTsuse.com- new upstream release 3.2.6. Subsumes all of our patches and adds a lot of other bug fixes for less common cases including for a couple that cause mdadm to crash.
* Tue Oct 09 2012 nfbrownAATTsuse.com- remove /lib/udev/devices from specfile as it is unused- mkinitrd-setup.sh: fixed recent breakage for IMSM arrays (bnc#783444)
* Thu Sep 20 2012 nfbrownAATTsuse.com- mdmon-takeover.fix find-free-devnum.fix mapfile-rebuild.fix udev-offroot Fix various issues will installation on IMSM RAID arrays, booting from those arrays, and clean shutdown when such an array is used for \'/\'. (bnc#752107 bnc#732294 bnc#770351)- mkinitrd-setup.sh: allow use stable md device name and allow it to have a \':\' in it. (bnc#779087)- boot.md: make sure udev-trigger runs before boot.md. (bnc#772286)
* Mon Aug 20 2012 nfbrownAATTsuse.com- mdmon-takeover.fix find-free-devnum.fix mapfile-rebuild.fix udev-offroot Fix various issues will installation on IMSM RAID arrays, booting from those arrays, and clean shutdown when such an array is used for \'/\'. (bnc#752107 bnc#732294 bnc#770351)
* Thu Jul 26 2012 fcrozatAATTsuse.com- Add blkid-builtin.patch: use blkid built-in from udev
* Thu Jul 05 2012 nfbrownAATTsuse.com- mdmon-arg.fix: fix arg parsing in mdmon so that \"--all --takeover\" works. (bnc#767150)
* Thu Jun 21 2012 meissnerAATTsuse.com- use recommends: smtp_daemon, similar to cronie example
* Thu Jun 14 2012 opensuseAATTcboltz.de- add missing dependencies on cron and /usr/sbin/sendmail (bnc#767155)
* Thu May 24 2012 nfbrownAATTsuse.com- udev-rules.fix: make sure systemd doesn\'t try to mount array before it is fully assembled. (bnc#752869)
* Tue May 22 2012 nfbrownAATTsuse.com- boot.md/mkinitrd-boot.sh: complete any incremental assembly before attempting to assemble arrays. If incremental assembly has partialy assembled degraded arrays, now is the time to start them going. (bnc#752869)- mdamd.cron: send daily reports if any arrays are degraded.
* Fri May 18 2012 nfbrownAATTsuse.com- New upstream version: 3.2.5. Serious regression in 3.2.4 necessitated a new release. Only significant fix is that \"--add\" now works again.
* Wed May 09 2012 nfbrownAATTsuse.com- New upstream version: 3.2.4. /run/mdadm is not used for runtime files, not /var/run or /dev/.mdadm.
* Fri Apr 20 2012 rmilasanAATTsuse.com- Run update of initrd at %post and %postun. We need this to make sure initrd reflects the updates.
* Wed Dec 21 2011 cooloAATTsuse.com- remove call to suse_update_config (very old work around)
* Thu Oct 06 2011 nfbrownAATTsuse.com- mkinitrd-setup.sh -- add \"AUTO -all\" to initrd mdadm.conf so that only arrays needed for boot are auto-assembled.- auto-line.fix -- fix handling of \"AUTO\" line in mdadm.conf so it actually works. (bnc#721905)
* Fri Sep 30 2011 uliAATTsuse.com- cross-build fix: use %__cc macro
* Thu Aug 18 2011 nfbrownAATTnovell.com- boot.md: improve \'status\' and add \'reload\' function. Also change \'Raid\' to \'RAID\' for consistency (bnc#709474)
* Thu Aug 18 2011 nfbrownAATTnovell.com- Use udev rules file from upstream package, rather have having a separate one.
* Thu Aug 18 2011 nfbrownAATTnovell.com- Update to new upstream 3.2.2 plug git patches. Also update FSF address in boot-md.
* Wed Aug 10 2011 crrodriguezAATTopensuse.org- Do not use -fno-strict-aliasing when not needed
* Tue Jun 14 2011 nfbrownAATTnovell.com- 64-md-raid.rules - make clear distinction between \'disk\' and \'partition\' cases. In particular it is wrong and problematic to test for \'md/array_state\' for \'partition\' devices as they cannot see \'md/
*\' and cannot exist when it doesn\'t have a valid value anyway. (bnc#684291)
* Tue Mar 01 2011 nfbrownAATTnovell.com- mkinitrd-boot.sh: don\'t assume /dev/md when device name cannot be found. It could easily be wrong, and there is no need as mdadm will choose a device. (bnc#656536)
* Thu Feb 17 2011 nfbrownAATTnovell.com- 64-md-raid.rules: avoid races with md devices appearing and disappearing. If the \'array_state\' file doesn\'t exist, that is equivalent to it having \'clear\' in it. (bnc#641382)
* Wed Nov 17 2010 nfbrownAATTnovell.com- boot.md - change args to mdmon. The argument parsing of mdmon changed in the recent update and we need to change boot.md to match.
* Thu Oct 21 2010 roAATTsuse.de- update to 3.1.4 - Support --grow to change the layout of RAID4/5/6 - Support --grow to change the chunksize of raid 4/5/6 - Support --grow to change level from RAID1 -> RAID5 -> RAID6 and back. - Support --grow to reduce the number of devices in RAID4/5/6. - Support restart of these grow options which assembling an array which is partially grown. - Assorted tests of this code, and of different RAID6 layouts. - The default metadata is now v1.2 - The default chunksize is now 512K rather than 64K. This seems more appropriate for modern devices. - The default bitmap chunksize for internal bitmaps is now at least 64Meg as fine grained bitmaps tend to impact performance more for little extra gain. - Alway make bitmap 4K-aligned if at all possible.- removed patches: - bitmap-4k-boundary.patch (obsolete/upstream) - fix-dup.patch (obsolete/upstream) - IMSM-part.patch (obsolete/upstream) - container-argv-check (obsolete/upstream)
* Mon Jun 28 2010 jengelhAATTmedozas.de- use %_smp_mflags
* Tue Jun 01 2010 mmarekAATTsuse.cz- mkinitrd-setup.sh: Fix for empty $md_devs variable.
* Fri Apr 23 2010 nfbrownAATTnovell.com- IMSM-part.patch - never try to include partitions in an IMSM array - bnc#597787- container-argv-check - avoid incorrect error message when assembling multiple containers - bnc#598827
* Thu Apr 22 2010 mmarekAATTsuse.cz- mkinitrd-boot.sh: Fix booting with root=/dev/disk/by-id/md-uuid
*, run mdadm -v when linuxrc=trace is given (bnc#597787).
* Mon Apr 19 2010 nfbrownAATTnovell.com- fix-dup.patch: revised version to make sure partial device is destroyed properly (bnc#587925).
* Fri Mar 26 2010 mmarekAATTsuse.cz- fix-dup.patch: catch attempts to add the same disk twice (bnc#587925).
* Wed Mar 24 2010 mmarekAATTsuse.cz- 64-md-raid.rules: Use absolute path to grep, otherwise udev will only search in /lib/udev (bnc#590832).
* Tue Mar 23 2010 mmarekAATTsuse.cz- mkinitrd-
*.sh: Assemble md arrays even if the root= or resume= option doesn\'t directly refer to md (bnc#589676, bnc#586837, bnc#583424).
* Mon Mar 22 2010 mmarekAATTsuse.cz- mdmon: Fix crash if /proc/mdstat lists 0.9 superblocks (bnc#589447).
* Thu Mar 11 2010 mmarekAATTsuse.cz- 64-md-raid.rules: Use blkid instead of vol_id.
* Thu Mar 11 2010 mmarekAATTsuse.cz- 64-md-raid.rules: Allow --incremental assembly if \"AUTO -all\" is given in mdadm.conf (fate#307478).
* Tue Mar 09 2010 mmarekAATTsuse.cz- Install udev rules in /lib/udev/rules.d (fate#307478).
* Mon Feb 22 2010 mmarekAATTsuse.cz- mkinitrd-setup.sh: call mdadm --scan only if necessary (bnc#581769).
* Fri Feb 19 2010 mmarekAATTsuse.cz- bitmap-4k-boundary.patch: Alling the internal bitmap on 4K boundary (bnc#577468).
* Fri Jan 15 2010 mmarekAATTsuse.cz- fix modprobe invocation in boot.md (bnc#565293).
* Fri Jan 15 2010 mmarekAATTsuse.cz- store mdmon runtime files in /dev/.mdadm, to make it easier to transfer mdmon from the initrd to the real root.- rework the mkinitrd setup script a bit.
* Wed Jan 06 2010 mmarekAATTsuse.cz- mkinitrd-
*.sh: fix booting from partitionable md devices and from container devices (bnc#565219).
* Tue Dec 15 2009 jengelhAATTmedozas.de- enable parallel building
* Fri Dec 04 2009 mmarekAATTsuse.cz- Support for partitionable md devices in mkinitrd scripts (fate#305883).
* Tue Nov 03 2009 mmarekAATTsuse.cz- update to 3.0.3 (fate#307159)
* mdmon improvements (needed for fate#306823)
* other fixes
* Fri Oct 30 2009 mmarekAATTsuse.cz- mkinitrd-boot.sh: add /sbin/mdmon to the initrd (fate#306823).
* Thu Oct 01 2009 mmarekAATTsuse.cz- updated to 3.0.2 + 2 patches
* bugfixes only
* Fri Jun 12 2009 mmarekAATTsuse.cz- remove static md
* device nodes, they should not be needed anymore.
* Thu Jun 11 2009 mmarekAATTsuse.cz- updated to 3.0 final- dropped all patches
* Tue Mar 03 2009 mmarekAATTsuse.cz- super0: Do all metadata IO with 4096byte alignment- super1 - do metadata IO in sector_size units. (bnc#466172)
* Sat Feb 21 2009 mmarekAATTsuse.cz- mkinitrd-setup.sh: filter out duplicate devices (bnc#461673, patch by Xin Wei Hu)
* Tue Feb 17 2009 mmarekAATTsuse.cz- disable auto-assemly in boot.md completely as it can collide with dmraid (bnc#474652). If someone wants to auto-assemble md arrays in the rescue system, they can run \'mdadm -Es -c partitions >mdadm.conf && mdadm -As -c mdadm.conf\' manually.
* Mon Feb 16 2009 mmarekAATTsuse.cz- fix segfault when stopping imsm arrays (bnc#473947, patch by Dan Williams)
* Mon Jan 26 2009 roAATTsuse.de- change fillup call from \"-Y\" to \"-y\" the boot script has been present in this package for long enough (SLES10-GA)
* Fri Dec 05 2008 hareAATTsuse.de- Wait for udev to settle before continuing (bnc#435778)
* Fri Dec 05 2008 nfbrownAATTsuse.de- boot.md : an exit status of \'2\' from \"mdadm --assemble\" should not be seen as failure by boot.md. It happens if one or more arrays is already assembled. (bnc#456028)
* Thu Nov 20 2008 nfbrownAATTsuse.de- don-t-auto-assemble-if-any-arrays-are-list.patch Avoid assembling extra arrays during initrd processing. bnc#445438
* Thu Nov 20 2008 nfbrownAATTsuse.de- mdmon-pass-symbolic-name-to-mdmon-instead-of-device.patch avoid problems if mdmon is run before udev creates any devices.
* Fri Nov 14 2008 nfbrownAATTsuse.de- intel.fixes.patch : various fixes from intel for proper handling of their metadata- name.fixes.patch : various fixes for new handling of device names - one could cause a crash.
* Sun Nov 09 2008 roAATTsuse.de- fix patch apply depth
* Fri Nov 07 2008 nfbrownAATTsuse.de- mdadm-auto-assemble.patch - fix various bugs in auto-assemble- start-kpartx-for-imsm-devices.patch - IMSM devices need to be partitioned, and may programs including YaST don\'t understand partitioned md devices, so run kpartx to create \'dm\' based partitions which have a better chance for being understood This relates to FATE#304220
* Fri Nov 07 2008 roAATTsuse.de- remove udev rule (conflicting with file in udev package)
* Fri Nov 07 2008 roAATTsuse.de- buildfix: add missing DESTDIR to Makefile for udev rule- fix len in snprintf to silence compiler warning about potential overflow
* Thu Nov 06 2008 nfbrownAATTsuse.de- Update from mdadm-3.0-devel1 to mdadm-3.0-devel2. This includes various bug fixes and enhancements to the extent that DDF and IMSM work reasonably well and can be auto-assembled much like other arrays.- Allow BOOT_MD_USE_MDADM_CONFIG to have the value \'part\' that, like \'no\', arrays are auto-assembled. However they get assembled as \'mdp\' partitionable arrays where possible. This currently only affect arrays with v1.x metadata. This supports FATE#303894
* Fri Oct 03 2008 mmarekAATTsuse.cz- fixed mdmon\'s clone_monitor on ia64
* Fri Oct 03 2008 mmarekAATTsuse.cz- fixed byte swapping in super-intel.c on big endian.
* Wed Sep 24 2008 roAATTsuse.de- change \"udevsettle\" to \"udevadm settle\"
* Fri Sep 19 2008 mmarekAATTsuse.cz- added /var/run/mdadm for mdmon- fixed build
* Thu Sep 18 2008 nfbrownAATTsuse.de- update to mdadm-3.0-devel1 package version number is set to 3.0 to avodi future confusion. This is a substantial update that provides support for handling the metadata entirely in userspace and thus making easier to handle a variety of metadata formats. Support is included for DDF and for the Intel Matrix metadata used by recent ICH chipsets. An extra program \'mdmon\' is needed and included. It is run to monitor any array using \'external\' (to the kernel) metadata and will update the metadata in response to device failures etc. This is required for FATE 304219
* Wed Sep 03 2008 hareAATTsuse.de- Call mkinitrd_setup during %post and %postun (bnc#413709)
* Sun Aug 17 2008 ajAATTsuse.de- Fix init scripts.
* Wed Jul 23 2008 hareAATTsuse.de- Include mkinitrd scriptlets.
* Fri Jun 20 2008 mmarekAATTsuse.cz- updated to 2.6.7 + fixes from git
* Avoid segfault when parsing /proc/mdstat with auto-read-only arrays.
* For v0.90 superblocks, print the \'Events\' count as a real count, not 2 numbers separated by a dot.
* Allow creation of a RAID6 with exactly one missing device.
* Use LOG_PID for syslog, so you get the pid of mdadm in the log files.
* --export now works with --examine too (not just --detail)
* Improve auto-creation of device special file when using - -incremental
* Simple locking for --incremental so mdadm doesn\'t get confused when run concurrently with itself.
* Make --incremental cope better with arrays that are being reshaped.
* Fix autoassemble for stack arrays.- remove /tmp/mdadm.conf in boot.md (bnc#401138)
* Wed Apr 30 2008 mmarekAATTsuse.cz- added some fixes from Neil\'s git repo, fixing bnc#368704 among others
* Mon Feb 04 2008 mmarekAATTsuse.cz- correctly display rc_status in boot.md
* Wed Jan 23 2008 mmarekAATTsuse.cz- fixed auto-assembly part of boot.md
* if /etc/mdadm.conf is empy or only contains whitespace or comments, no autoassembly is done
* remove /tmp/mdadm.conf even if a directory [#329678]- dropped mdrun and raidautorun (no longer needed)
* Wed Oct 24 2007 mmarekAATTsuse.cz- updated to 2.6.4
* Make \"--create --auto=mdp\" work for non-standard device names.
* Fix restarting of a \'reshape\' if it was stopped in the middle.
* Fix a segfault when using v1 superblock.
* Make --write-mostly effective when re-adding a device to an array.
* Various minor fixes- changes in 2.6.3:
* allow --write-behind to be set for --grow.
* When adding new disk to an array, don\'t reserve so much bitmap space that the disk cannot store the required data. (Needed when 1.x array was created with older mdadm).
* When adding a drive that was a little too small, we did not get the correct error message.
* Make sure that if --assemble find an array in the critical region of a reshape, and cannot find the critical data to restart the reshape, it gives an error message.
* Fix segfault with \'--detail --export\' and non-persistent superblocks.
* Various manpage updates.
* Improved \'raid4\' support (--assemble, --monitor)
* Option parsing fixes w.r.t -a
* Interpret \"--assemble --metadata=1\" to allow any version 1.x metadata, and be more specific in the \"metadata=\" message printed with --examine --brief
* Fix spare migration in --monitor.
* Fri Jul 27 2007 mmarekAATTsuse.cz- changes to the init script [#288454]
* don\'t try to autoassemble if /etc/mdadm.conf exists (even an empty one)
* ony autoassemble partitions found in /proc/partitions
* Fri Jul 13 2007 mmarekAATTsuse.cz- updated to 2.6.2
* --fail detached and --remove faulty can be used to fail and remove devices that are no longer physically present.
* --export option for --detail or present information in a format that can be processed by udev.
* fix internal bitmap allocation problems with v1.1, v1.2 metadata.
* --help now goes to stdout so you can direct it to a pager.
* Various manpage updates.
* Make \"--grow --add\" for linear arrays really work.
* --auto-detect to trigger in-kernel autodetect.
* Make return code for \"--detail --test\" more reliable. Missing devices as well as failed devices cause an error.- added some fixes from Neil\'s git repo (mdadm-git-fixes.patch)
* Thu Jun 21 2007 adrianAATTsuse.de- fix changelog entry order
* Mon Apr 02 2007 mmarekAATTsuse.cz- updated to 2.6.1
* --monitor was producing some meaningless warnings due to a bug.
* Fix some compiler warnings.
* Fully support --grow for raid6. If a reshape crashed during the critical period, mdadm wouldn\'t restore the Q information properly.
* Update documentation for --grow.
* Report bitmap status in --detail and --examine
* Default to v1 superblocks instead of v0.90 if the array is too big for 0.90 to handle.
* Sort the output of \"mdadm --detail --scan\" so that it is in a suitable order for assembling arrays. i.e. components come before an array that they are part of.
* Require bitmap files to have a \'/\' in their name.
* Rewrite \'reshape\' support including performing a backup of the critical region for a raid5 growth, and restoring that backup after a crash.
* Put a \'canary\' at each end of the backup so a corruption can be more easily detected.
* Support --backup-file for backing-up critical section during growth.
* Erase old superblocks (of different versions) when creating new array.
* Allow --monitor to work with arrays with >28 devices
* Report reshape information in --detail
* Handle symlinks in /dev better
* Fix mess in --detail output which a device is missing.
* Support \'bitmap=\' in mdadm.conf for auto-assembling arrays with write-intent bitmaps in separate files.
* Fix alignment problem in version-1 superblocks. NOTE: This is an incompatable change affecting raid5 reshape. If you want to reshape a raid5 using version-1 superblocks, use 2.6.17-rc2 or later, and mdadm-2.4.1 or later.
* Support \'mailfrom\' line in mdadm.conf so the From: line in alert emails can be explicitly set.
* Arrange that SparesMissing (which is similar in import to DegradedArray) generates an Email.
* Assume \"DEVICE partitions\" if no DEVICE line is given.
* Support new \'offset\' layout for raid10.
* When creating a bitmap file, choose a chunksize to limit number of bitmap chunks to 2 million. More than this can cause kmalloc failure.
* New \'CREATE\' line in mdadm.conf for defaults such as owner, group, mode and auto-flag
* --detail checks if array has been started or not and includes that in report.
* When using --update=uuid on an array with a bitmap, update the bitmap\'s uuid too.
* Add a copy of /proc/mdstat to the mail message sent by mdadm - -monitor.
* New flag --no-degraded to avoid starting arrays if there are fewer devices available than last time the array was started. This is only needed with --scan, as with --scan, that behaviour is the default.
* Support for \'homehost\' concept. This is a fairly major update. It includes a configfile option and a command line option for specifying a homehost, records that host in the superblock, and reports the homehost where possible.
* Support for Auto Assembly. \"mdadm -As\" will, if provided with the name of a homehost, try to assemble all arrays it can find that were created for that homehost. See man pages for more details.
* Don\'t try to create devices with --manage or --grow
* allow default metadata (superblock) type to be specified in mdadm.conf
* Avoid some misdetection of overlapping partitions
* Add \'Array Slot\' line to --examine for version-1 superblocks to make it a bit easier to see what is happening.
* Work around bug in --add handling for version-1 superblocks in 2.6.17 (and prior).
* Make -assemble a bit more resilient to finding strange information in superblocks.
* When creating devices in /dev/md/ create matching symlinks from /dev. e.g. /dev/md0 -> /dev/md/0. Allow this to be disabled in mdadm.conf or on command line.
* Allow a number (of partitions) after the \'yes\' option to --auto= This is particularly useful in the \'create\' line in mdadm.conf.
* Remove partitions from any whole device that is made part of an md array. This is a work-around for annoying messages when the first block on some drive accidentally looks like a partition table.
* Close stray fd in mdassemble so that it can assemble stacked devices
* If mdassemble finds an array already assembled, it marks it read-write.
* Remove error in md_open if array is already active. This isn\'t needed and gets in the ways if an array was created e.g. in initramfs, but device doesn\'t yet exist in /dev.
* When --assemble --scan is run, if all arrays that could be found have already been started, don\'t report an error.
* Allow --assemble --force to mark a raid6 clean when it has two missing devices (which is needed else if won\'t assemble. Without this fix it would only assemble if one or zero missing devices.
* Support --update=devicesize for cases where the underlying device can change size.
* Default to --auto=yes so the array devices with \'standard\' names get created automatically, as this is almost always what is wanted.
* Give useful message if raid4/5/6 cannot be started because it is not clean and is also degraded.
* Increase raid456 stripe cache size if needed to --grow the array. The setting used unfortunately requires intimate knowledge of the kernel, and it not reset when the reshape finishes.
* Change \'Device Size\' to \'Used Dev Size\' because it only shows how much of each device is actually used, not how big they are.
* --wait or -W will wait for resync activity to finish on the given devices.
* If two drives in a raid5 disappear at the same time, then \"-Af\" will add them both in rather than just one and forcing the array to \'clean\'. This is slightly safer in some cases.
* Don\'t hold md device open for so long in --monitor mode - map_dev can be slow and interferes with trying to stop the array.
* Support --uuid= with --create to choose your own UUID.
* New major more \"--incremental\" for incremental assemble of arrays, intended for use with udev.
* lots of bugfixes
* manpage updates
* Wed Jan 10 2007 mmarekAATTsuse.cz- use raidautorun instead of mdrun to autodetect the raid arrays in boot.md [#230733]
* Wed Nov 08 2006 prusnakAATTsuse.cz- fixed subscript out of range [#212697]
* Wed Sep 20 2006 mjancarAATTsuse.cz- update to 2.5.3
* lots bugfixes
* drop all patches (integrated upstream)
* Fri Jul 28 2006 olhAATTsuse.de- remove dropped boot.ibmsis from boot.md- boot.rootfsck should start before boot.md (#181972)
* Fri Jul 21 2006 olhAATTsuse.de- remove boot.proc from Required-Start: in boot.md (#178753)
* Wed May 03 2006 mjancarAATTsuse.cz- fix false SparesMissing error (#171326)
* Wed Apr 26 2006 hareAATTsuse.de- Fix init script dependencies- Implement MDADM_DEVICE_TIMEOUT to set a timeout for udevsettle (#149979)
* Tue Apr 25 2006 mjancarAATTsuse.cz- add static device nodes for udev (#168824)
* Wed Apr 19 2006 mjancarAATTsuse.cz- set $BOOT_MD_USE_MDADM_CONFIG to \"yes\" by default (#155120)
* Fri Apr 07 2006 mjancarAATTsuse.cz- detach mdadmd from tty in rcmdadmd (#160881)
* Mon Apr 03 2006 mjancarAATTsuse.cz- fix garbled output with --detail (#160827)- fix fix write-mostly with --add and --re-add (#162968)
* Fri Mar 24 2006 mjancarAATTsuse.cz- add /sbin/raidautorun (#159460)
* Wed Mar 08 2006 mjancarAATTsuse.cz- add $BOOT_MD_USE_MDADM_CONFIG sysconfig variable (#155120)
* Thu Feb 09 2006 mjancarAATTsuse.cz- round free size to chunk size multiply on --create (#148562)
* Tue Feb 07 2006 mjancarAATTsuse.cz- move boot.multipath to Should-Start instead of Required-Start
* Mon Feb 06 2006 mjancarAATTsuse.cz- add \"Obsoletes: raidtools\"- start boot.md after boot.multipath- call mdadm without -a from mdrun, an argument is required in 2.2
* Mon Feb 06 2006 mjancarAATTsuse.de- don\'t start mdadmd by default
* Sun Feb 05 2006 mjancarAATTsuse.cz- include option for email to be sent on start (#142105)- fix missing md autostart due to raidtools dropped (#148234)
* include mdrun script from Debian
* create boot.md initscipt
* Sun Feb 05 2006 schwabAATTsuse.de- Fix memset parameters.
* Thu Feb 02 2006 mjancarAATTsuse.cz- fix segfault on --assemble (#146514)
* Fri Jan 27 2006 mlsAATTsuse.de- converted neededforbuild to BuildRequires
* Wed Jan 25 2006 olhAATTsuse.de- fix uninitialized variable, memset call and memcmp/memcpy bug mdadm.bug144647-array.init.patch mdadm.bug144647-update_super1-memcpy.patch mdadm.bug144647-add_internal_bitmap0-memcpy.patch
* Wed Jan 11 2006 mjancarAATTsuse.cz- update ro 2.2
* Tue Dec 20 2005 roAATTsuse.de- at least output errors if they occur (instead of ignoring)
* Wed Nov 30 2005 schwabAATTsuse.de- Fix broken formats.
* Tue Oct 25 2005 ajAATTsuse.de- Build with -fno-strict-aliasing.
* Wed Oct 12 2005 mjancarAATTsuse.cz- update to 2.1
* Thu Jul 28 2005 anickaAATTsuse.cz- update to 1.12.0
* Wed Jun 15 2005 meissnerAATTsuse.de- use RPM_OPT_FLAGS correctly.
* Tue Apr 19 2005 postadalAATTsuse.de- updated to version 1.11.0- fixed for gcc 4.0- removed obsoleted patch config-fix
* Wed Mar 30 2005 postadalAATTsuse.cz- fixed parsing command line option \'--config=partions\' [#74603]
* Fri Feb 04 2005 postadalAATTsuse.cz- updated to version 1.9.0
* Thu Jan 13 2005 postadalAATTsuse.cz- updated to version 1.8.1- extended comment in sysconfig.mdadm [#48567]
* Fri Aug 06 2004 postadalAATTsuse.cz- updated to version 1.6.0
* added --auto= and --assume-clean options
* added \"degraded\" and \"recovering\" options to the \"Status:\" entry
* Tue Feb 10 2004 postadalAATTsuse.cz- updated to version 1.5.0
* new commands \"mdassemble\"
* support for raid6 as found in 2.6.2
* support partitioned md arrays with a different major number and naming scheme
* added \"SparesMissing\" event when --monitor first sees an array and it doesn\'t have the enough spare devices.
* Sun Jan 11 2004 adrianAATTsuse.de- add %defattr
* Mon Dec 01 2003 fehrAATTsuse.de- fix quoting problem in start script (#33392)
* Fri Aug 29 2003 fehrAATTsuse.de- add PreReq for fillup
* Tue Aug 26 2003 fehrAATTsuse.de- add %stop_on_removal and %restart_on_update
* Thu Aug 14 2003 fehrAATTsuse.de- add missing activation metadata in sysconfig (#28901)
* Tue Jul 29 2003 fehrAATTsuse.de- update to new version 1.3.0 of package
* Mon Apr 14 2003 postadalAATTsuse.cz- fixed init script (added return value for unimplemented reload function)
* Mon Mar 31 2003 postadalAATTsuse.cz- added buildroot, init script, sysconfig- bzip2 sources and cleaned specfile
* Thu Mar 20 2003 fehrAATTsuse.de- update to version 1.2.0 of package
* Mon Mar 03 2003 fehrAATTsuse.de- update to version 1.1.0 of package
* Mon Dec 02 2002 fehrAATTsuse.de- Fix for new glibc/gcc
* Tue Sep 17 2002 roAATTsuse.de- removed bogus self-provides
* Fri Sep 13 2002 lmbAATTsuse.de- Fix for 64bit arch; ioctl returns long instead of int (#20339)
* Fri Aug 23 2002 lmbAATTsuse.de- Multipath arrays can now be build manually even without a superblock.- One debugging chunk removed from patch.
* Tue Aug 13 2002 lmbAATTsuse.de- Fix for the assembly of multipath arrays.
* Mon Aug 12 2002 lmbAATTsuse.de- Added patch to support the enhanced multipath features.
* Mon Aug 05 2002 fehrAATTsuse.de- make SuSE package from version 1.0.1 of mdadm