Changelog for rubygem-passenger-3.0.8-2.9.x86_64.rpm :
Mon Aug 22 14:00:00 2011 mrueckertAATTsuse.de
- update to version 3.0.8

* [Nginx] Upgraded preferred Nginx version to 1.0.5.

* [Nginx] Fixed various compilation problems on various platforms.

* [Nginx] We now ensure that SERVER_NAME is equal to HTTP_HOST
without the port part. This is needed for Rack compliance. By
default Nginx sets SERVER_NAME to whatever is specified in the
server_name directive, but that\'s not necessarily the correct
value. This fixes, for example, the use of the \'map\' statement
in config.ru.

* [Nginx] Added the options passenger_buffer_size,
passenger_buffers and passenger_busy_buffers_size. These
options are similar to proxy_module\'s similarly named options.
You can use these to e.g. increase the maximum header size
limit.

* [Nginx] passenger_pre_start now supports virtual hosts that
listen on Unix domain sockets.

* [Apache] Fixed the pcre.h compilation problem.

* [Standalone] Fixed \'passenger stop\'.
It didn\'t work properly because it kept waiting for \'tail\' to
exit. We now properly terminate \'tail\' as well.

* Fixed compatibility with Rake 0.9.

* Fixed various Ruby 1.9 compatibility issues.

* Various documentation improvements.

* New Union Station filter language features.
It now supports status codes and response times. Please refer
to https://engage.unionstationapp.com/help#filtering for more
information.

Mon Aug 22 14:00:00 2011 mrueckertAATTsuse.de
- make sure the passenger root variable always points to the
passenger version in the package. To achieve that we introduce a
(mod_)passenger_root.include file which will be included from the
old (mod_)passenger.conf. the new file is not marked as
config(noreplace) and will be overwritten by the package.

Mon Aug 22 14:00:00 2011 adrianAATTsuse.de
- update to version 3.0.8

* [Nginx] Upgraded preferred Nginx version to 1.0.5.

* [Nginx] Fixed various compilation problems on various platforms.

* [Nginx] We now ensure that SERVER_NAME is equal to HTTP_HOST without the port part.
This is needed for Rack compliance. By default Nginx sets SERVER_NAME to
whatever is specified in the server_name directive, but that\'s not necessarily
the correct value. This fixes, for example, the use of the \'map\' statement
in config.ru.

* [Nginx] Added the options passenger_buffer_size, passenger_buffers and passenger_busy_buffers_size.
These options are similar to proxy_module\'s similarly named options. You can
use these to e.g. increase the maximum header size limit.

* [Nginx] passenger_pre_start now supports virtual hosts that listen on Unix domain sockets.

* [Apache] Fixed the pcre.h compilation problem.

* [Standalone] Fixed \'passenger stop\'.
It didn\'t work properly because it kept waiting for \'tail\' to exit.
We now properly terminate \'tail\' as well.

* Fixed compatibility with Rake 0.9.

* Fixed various Ruby 1.9 compatibility issues.

* Various documentation improvements.

* New Union Station filter language features.
It now supports status codes and response times.
Please refer to https://engage.unionstationapp.com/help#filtering
for more information.
- use official source tar ball now and build the gem to install

Tue Aug 16 14:00:00 2011 mrueckertAATTsuse.de
- buildrequire rubygem-rack-1_3 to fix the have choice problem
- use the mod_full_name macro

Wed Jun 8 14:00:00 2011 ammlerAATTopenttdcoop.org
- add config template to -nginx subpackage

Mon May 2 14:00:00 2011 mrueckertAATTsuse.de
- require nginx in the -nginx subpackage

Sun Apr 24 14:00:00 2011 mrueckertAATTsuse.de
- fix build on devel_languages_ruby_SLE_10
use curl-devel for anything older than sle11/11.1

Wed Apr 20 14:00:00 2011 adrianAATTsuse.de
- add support for mod_xforward

Thu Apr 14 14:00:00 2011 mrueckertAATTsuse.de
- switch to use system libev

Thu Apr 14 14:00:00 2011 mrueckertAATTsuse.de
- update to version 3.0.7

* Upgraded preferred Nginx version to 1.0.0.

* Phusion Passenger Standalone now pre-starts application processes
at startup instead of doing that at the first request.

* When sending data to Union Station, the HTTP status code is now
also logged.

* Various Union Station-related stability improvements.

* The Linux OOM killer was previously erroneously disabled for all
Phusion Passenger processes, including application processes. The
intention was to only disable it for the Watchdog. This has been
fixed, and the Watchdog is now the only process for which the OOM
killer is disabled.

* Due to a typo, the dependency on file-tail was not entirely
removed in 3.0.6. This has now been fixed.
- fixed cleaning up the ext tree

Tue Apr 12 14:00:00 2011 mrueckertAATTsuse.de
- split out a devel-static package containing the 2 static
libraries that you need to compile nginx with passenger support
later.
that saves us recompiling them in the nginx build.
- clean up file lists

Tue Apr 12 14:00:00 2011 mrueckertAATTsuse.de
- update to version 3.0.6

* Fixed various Union Station-related stability issues.

* Fixed an issue with host name detection on certain platforms.

* Improved error logging in various parts.

* The dependency on the file-tail library has been removed.

* During installation, check whether /tmp is mounted with \'noexec\'.
Phusion Passenger\'s installer relies on /tmp
*not
* being mounted
with \'noexec\'. If it is then the installer will now show a
helpful error message instead of bailing out in a confusing
manner. Users can now tell the installer to use a different
directory for storing temporary files by customizing the $TMPDIR
environment variable.

* Phusion Passenger Standalone can now run Rackup files that are
not named \'config.ru\'. The filename can be passed through the
command line using the -R option.
- additional changes from 3.0.5

* [Apache] Fixed Union Station process statistics collection
Union Station users that are using Apache may notice that no
process information show up in Union Station. This is because of
a bug in Phusion Passenger\'s Apache version, which has now been
fixed.

* [Apache] PassengerAnalytics has been renamed to
UnionStationSupport This option has been renamed for consistency
reasons.

* [Nginx] passenger_analytics has been renamed to
union_station_support This option has been renamed for
consistency reasons.

* Fixed Union Station data sending on older libcurl versions
Some Union Station users have reported that their data don\'t
show up. Upon investigation this turned out to be a
compatibility with older libcurl versions. Affected systems
include all RHEL 5 based systems, such as RHEL 5.5 and CentOS
5.5. We\'ve now fixed compatibility with older libcurl versions.

* Added support for the Union Station filter language
This language can be used to limit the kind of data that\'s sent
to Union Station. Please read
https://engage.unionstationapp.com/help#filtering for details.

* Fixed a PassengerMaxPoolSize/passenger_max_pool_size violation
bug People who host a lot of different applications on Phusion
Passenger may notice that it sometimes spawns more processes
than is allowed by PassengerMaxPoolSize/passenger_max_pool_size.
This has been fixed.
- additional changes from 3.0.4

* [Apache] Changed mod_dir workaround hook priority
Phusion Passenger temporarily disables mod_dir on all Phusion
Passenger-handled requests in order to avoid conflicts. In order
to do this it registers some Apache hooks with the
APR_HOOK_MIDDLE priority, but it turned out that this breaks
some other modules like mod_python. The hook priority has been
changed to APR_HOOK_LAST to match mod_dir\'s hook priorities.
Issue reported by Jay Freeman.

* Added support for Union Station: http://www.unionstationapp.com/

* Some error messages have been improved.

Fri Feb 25 13:00:00 2011 mrueckertAATTsuse.de
- update to version 3.0.3

* [Nginx] Preferred Nginx version upgraded to 0.8.54
The previous preferred version was 0.8.53.

* PATH_INFO and REQUEST_URI now contain the original escaped URI
Phusion Passenger passes the URI, as reported by Apache/Nginx,
to application processes through the PATH_INFO and REQUEST_URI
variables. These variables are supposed to contain the
original, unescaped URI, e.g. /clubs/%C3%BC. Both Apache and
Nginx thought that it would be a good idea to unescape the URI
before passing it to modules like Phusion Passenger, thereby
causing PATH_INFO and REQUEST_URI to contain the unescaped URI,
e.g. /clubs/ü. This causes all sorts of encoding problems. We
now manually re-escape the URI when setting PATH_INFO and
REQUEST_URI. Issue #404.

* The installer no longer detects directories as potential
commands Previously the installer would look in $PATH for
everything that\'s executable, including directories. If one has
/usr/lib in $PATH and a directory /usr/lib/gcc exists then the
installer would recognize /usr/lib/gcc as the compiler. We now
explicitly check whether the item is also a file.

* PseudoIO now responds to #to_io
Phusion Passenger sets STDERR to a PseudoIO object in order to
capture anything written to STDERR during application startup.
This breaks some libraries which expect STDERR to respond to
[#]to_io. This has now been fixed. Issue #607.

* Fixed various other minor bugs
See the git commit log for details.
- splitted out testsuite and documentation

Thu Jan 20 13:00:00 2011 mrueckertAATTsuse.de
- moved apache2 requires to the apache2 subpackage

Thu Jan 13 13:00:00 2011 chrisAATTcomputersalat.de
- fix spec
o Group field must be present in package: rubygem-passenger-nginx

Thu Jan 13 13:00:00 2011 schubiAATTnovell.com
- Spit packages into
- - rubygem-passenger
- - rubygem-passenger-nginx
- - rubygem-passenger-apache2

Tue Dec 21 13:00:00 2010 chrisAATTcomputersalat.de
- update to version 3.0.2

* [Nginx] Fix crash if passenger_root refers to a nonexistant
directory.

* Fixed file descriptor closing issues on FreeBSD: issue #597.

* Fix the fakeroot task. Issue #592

* Update NEWS.

* Fix Nginx configure script: it didn\'t correctly change back the
orginal working directory after compilation.

* NetBSD doesn\'t support llroundl() so work around it by using
llround(). Issue #593.

* Fix compilation warning on NetBSD: issue #593.

* Fix use of fcntl(.., F_CLOSEM)

* Merge branch \'master\' into debian

* Add support to EventedClient for only closing the writer half
of the connection.

* Add StaticString.find(substring)
... and lot more

Tue Dec 7 13:00:00 2010 mrueckertAATTsuse.de
- update to version 3.0.1

* Fixed malfunction after web server restart
On Linux systems that have a non-standard filesystem on /tmp, Phusion
Passenger could malfunction after restarting the web server because of
a bug that\'s only triggered on certain filesystems. Issue #569.

* Boost upgraded to version 1.44.0.
We were on 1.42.0.

* Much improved startup error messages
Phusion Passenger performs many extensive checks during startup to ensure
integrity. However the error message in some situation could be vague.
These startup error messages have now been improved dramatically, so that
if something goes wrong during startup you will now more likely know why.

* Curl < 7.12.1 is now supported
The previous version fails to compile with Curl versions earlier than
7.12.1. Issue #556.

* passenger-make-enterprisey fixed
This is the command that people can run after donating. It allows people
to slightly modify Phusion Passenger\'s display name as a joke. In 3.0.0 it
was broken because of a typo. This has been fixed.

* Removed passenger-stress-test
This tool was used during the early life of Phusion Passenger for stress
testing websites. Its performance has never been very good and there are
much better tools for stress testing, so this tool has now been removed.

* [Apache] RailsEnv and RackEnv configuration options are now equivalent
In previous versions, RailsEnv only had effect on Rails 1 and Rails 2 apps
while RackEnv only had effect on Rack apps. Because Rails 3 apps are
considered Rack apps, setting RailsEnv had no effect on Rails 3 apps.
Because this is confusing to users, we\'ve now made RailsEnv and RackEnv
equivalent. Issue #579.

* [Nginx] Fixed compilation problems on systems with unpowerful shells
Most notably Solaris. Its default shell does not support some basic
constructs that we used in the Nginx configure script.

* [Nginx] Upgraded default Nginx version to to 0.8.53
The previous default was 0.8.52.

* [Nginx] passenger_enabled now only accepts \'on\' or \'off\' values
Previously it would recognize any value not equal to \'on\' as meaning
\'off\'. This caused confusion among users who thought they could also
specify \'true\', so we now throw a proper error if the value is
unrecognized. Fixes issue #583.
- cleaned up spec file
- move passenger_native_support from ext to lib dir (bnc#657964)

Thu Oct 28 14:00:00 2010 mrueckertAATTsuse.de
- update to version 3.0.0
This is a major release with many changes. Please read our blog
for details.
http://blog.phusion.nl/2010/10/18/phusion-passenger-3-0-0-final-released/
- new dependencies:
rubygem-daemon_controller
rubygem-file-tail
libcurl

Fri Jul 9 14:00:00 2010 mrueckertAATTsuse.de
- mark mod_passenger.conf config(noreplace)

Fri Jun 25 14:00:00 2010 mrueckertAATTsuse.de
- update to version 2.2.15
- [Apache] Fixed incorrect temp dir cleanup by passenger-status
On some systems, running passenger-status could print the
following message: \"
*
*
* Cleaning stale folder
/tmp/passenger.1234\" ...after which Phusion Passenger breaks
because that directory is necessary for it to function
properly. The cause of this problem has been found and has been
fixed.
- [Apache] Fixed some upload handling problems Previous versions
of Phusion Passenger check whether the size of the received
upload data matches the contents of the Content-Length header
as received by the client. It turns out that there could be a
mismatch e.g. because of mod_deflate input compression, so we
can\'t trust Content-Length anyway and we\'re being too strict.
The check has now been removed.
- [Nginx] Fixed compilation issues with Nginx >= 0.7.66 Thanks to
Potamianos Gregory for reporting this issue. Issue #500.
- [Nginx] Default Nginx version changed to 0.7.67 The previous
default version was 0.7.65.
- Fixed more Bundler problems Previous versions of Phusion
Passenger would preload some popular libraries such as mysql
and sqlite3 in order to utilize copy-on-write optimizations
better. However this behavior conflicts with Bundler so we\'ve
removed it.

Mon Jun 14 14:00:00 2010 mrueckertAATTsuse.de
- update to version 2.2.14

* Added support for Rubinius
Patch contributed by Evan Phoenix.

* Fixed a mistake in the SIGQUIT backtrace message.
Patch contributed by Christoffer Sawicki.

* [Nginx] Fix a localtime() crash on FreeBSD
This was caused by insufficient stack space for threads.
Issue #499.
- additional changes from version 2.2.13

* Fixed some Rails 3 compatibility issues that were recently
introduced.

* Fixed a typo that causes config/setup_load_paths.rb not to be
loaded correctly.
- additional changes from version 2.2.12

* Improved Bundler support.
Previous versions might not be able to correctly load gems
bundled by Bundler. We\'ve also documented how our Bundler
support works and how to override our support if you need
special behavior. Please refer to the Phusion Passenger Users
Guide, section \"Bundler support\".

* Worked around some user account handling bugs in Ruby.
Issue #192.

* Fixed some Ruby 1.9 tempfile.rb compatibility problems.

* Fixed some compilation problems on some ARM Linux platforms.

* [Apache] Suppress bogus mod_xsendfile-related error messages.
When mod_xsendfile is being used, Phusion Passenger might print
bogus error messages like \"EPIPE\" or \"Apache stopped forwarding
the backend\'s response\" to the log file. These messages are
normal, are harmless and can be safely ignored, but they
pollute the log file. So in this release we\'ve added code to
suppress these messages when mod_xsendfile is being used.
Issue #474.

* [Nginx] Fixed \"passenger_user_switching off\" permission
problems If Nginx is running as root and
passenger_user_switching is turned off, then Phusion Passenger
would fail to initialize because of a permission problem. This
has been fixed. Issue #458.

* [Nginx] Nginx >= 0.8.38 is now supported.
Thanks to Sergey A. Osokin for reporting the problem.

* [Nginx] passenger-install-nginx-module upgraded
It now defaults to installing Nginx 0.7.65 instead of 0.7.64.

Fri Jun 11 14:00:00 2010 mrueckertAATTsuse.de
- use rubygems_requires macro

Tue Mar 16 13:00:00 2010 chrisAATTcomputersalat.de
- update to version 2.2.11

* This release fixes a regression that appeared in 2.2.10 which only
affects Apache. When under high load, Apache might freeze and stop
responding to requests. It is caused by a race conditions which is
why it escaped our last release testing.
- fix initializer problem
o do not install ApplicationPoolServerExecutable to
/usr/lib/phusion_passenger
leave at origin place and set correct AATTPassengerRootAATT in
mod_passenger.conf

Thu Feb 25 13:00:00 2010 mrueckertAATTsuse.de
- update to version 2.2.10

* Fixed some Bundler compatibility problems.

* Fixed some file descriptor passing problems, which previously
could lead to mysterious crashes.

* Fixed some compilation problems on newer GCC versions. Issue #430.

* Support #size method in rack.input.
- for changes from 2.2.8 and 2.2.9 see
/usr/lib
*/ruby/gems/1.8/gems/passenger-2.2.10/NEWS

Wed Dec 2 13:00:00 2009 chrisAATTcomputersalat.de
- update to version 2.2.7

* Removed forgotten debugging code in passenger-install-apache2-module,
which caused it not to compile anything.
- additional changes from 2.2.6

* Some /tmp cleaner programs such as tmpwatch try to remove
subdirectories in /tmp/passenger.xxx after a while because they
think those subdirectories are unused. This could cause Phusion
Passenger to malfunction, requiring a web server restart.
Measures have now been taken to prevent those tmp cleaner
programs from removing anything in /tmp/passenger.xxx. Issue #365.

* When autodetecting the application type, Rack is now given more
priority than Rails. This allows one to drop a config.ru file in
a Rails directory and have it detected as a Rack application
instead of a Rails application. Patch contributed by Sam
Pohlenz: issue #338.

* The default socket backlog has been increased from \'SOMAXCONN\'
(which is 128 on most platforms) to 1024. This should fix most
\'helper_server.sock failed: Resource temporarily unavailable\'
errors.

* Fixed compilation problems on Solaris. Issue #369 and issue #379.

* Fixed crashes on PowerPC.

* Some Ruby 1.9 compatibility fixes. Issue #398.

* The installer now displays correct dependency installation
instructions for Mandriva Linux.

* [Apache] The location of the \'apxs\' and \'apr-config\' commands
can now also be passed to the installer through the --apxs-path
and --apr-config-path parameters, in addition to the $APXS2 and
$APR_CONFIG environment variables. Issue #3.

* [Nginx] Various problems that only occur on 64-bit platforms
have been fixed.

* [Nginx] The installer now installs Nginx 0.7.64 by default.
- fix Passenger could not be initialized
o \'/usr/lib/phusion_passenger/ApplicationPoolServerExecutable\'

Fri Oct 16 14:00:00 2009 mrueckertAATTsuse.de
- update to version 2.2.5
see /usr/lib
*/ruby/gems/1.8/gems/passenger-2.2.5/NEWS

Thu Mar 26 13:00:00 2009 mrueckertAATTsuse.de
- update to version 2.1.2
- Support for Rails 2.3
- Improved compatibility with other Apache modules, such as
mod_rewrite
- Ruby 1.9 support
- Support for NFS setups
- Various I/O handling and scaling improvements and fixes
- Ability to disable Phusion Passenger for arbitrary URLs
(PassengerEnabled option)
- Improved application compatibility
- Improved command-line admin tools
- Ability to display backtraces for all threads
- Improved security
- More customization options for exotic systems/setups
- Various usability improvements
- In particular, many error messages have been improved so that
end users don’t have to stare at the screen for minutes
wondering what the computer is trying to tell them. There are
also many small usability improvements here and there.
- Various other minor improvements and bug fixes
- PassengerPoolIdleTime can now be set to 0, which means that
the backend application must never idle timeout. This feature
has been contributed by redmar.
- The passenger-status tool will now display Phusion
Passenger’s own backtraces for C++ code, in order to make it
possible to detect potential freezes in C++ code.
- Phusion Passenger error pages now return HTTP 500 errors, as
they should.
- The ApplicationSpawner server and FrameworkSpawner server
idle times can now be customized.
- In the 2.0.x series, sometimes more backend processes might
be spawned than is allowed by the ‘PassengerMaxPoolSize’
option. This has been fixed.

Tue Jan 13 13:00:00 2009 mrueckertAATTsuse.de
- fix path for apache config

Fri Dec 19 13:00:00 2008 mrueckertAATTsuse.de
- add basic apache config
- fix path to native_support

Fri Dec 19 13:00:00 2008 mrueckertAATTsuse.de
- fix requires

Wed Dec 17 13:00:00 2008 mrueckertAATTsuse.de
- update to version 2.0.6
Fixed Ruby 1.8.5 compatibility
In the previous release, we fixed Ruby 1.8.7 compatibility,
but this broke 1.8.5. We’ve fixed this.
Removed unintentional dependency on MySQL and SQLite
Phusion Passenger 2.0.5 preloads the mysql and sqlite3
libraries when running in Ruby Enterprise Edition, for better
copy-on-write efficiency. But it didn’t take into account that
these libraries may not be installed. This has been fixed.

Fri Dec 5 13:00:00 2008 mrueckertAATTsuse.de
- use boost copy from gem when building on older distros.
split rubygem-passenger-2.0.5_system_boost.patch into:
rubygem-passenger-2.0.5_boost_exception.patch
rubygem-passenger-2.0.5_system_boost.patch
- added rubygem-passenger-2.0.5_missing_includes.patch

Fri Dec 5 13:00:00 2008 mrueckertAATTsuse.de
- initial package of version 2.0.5