Changelog for tcpdump-4.5.1-1.1.x86_64.rpm :
Sat Dec 14 13:00:00 2013 andreas.stiegerAATTgmx.de
- update to 4.5.1
Version 4.5.0 revised for non-code related edits
- some NFSv4 fixes for printing
- fix printing of unknown TCP options, and tcp fast-open
- fixes for syslog parser
- some gcc-version-specific flag tuning
- improvements to babel printing
- add OpenFlow 1.0 (no SSL) and test cases
- GeoNet printer.
- added STBC Rx support
- improvements to DHCPv6 decoder
- clarify which autoconf is needed
- Point users to the the-tcpdump-group repository on GitHub rather
than the mcr repository
- Add MSDP printer.
- Fixed IPv6 check on Solaris and other OSes requiring extra
networking libraries.
- Add support for VXLAN (draft-mahalingam-dutt-dcops-vxlan-03),
and add \"vxlan\" as an option for -T.
- Add support for OTV (draft-hasmit-otv-04).
fixes for DLT_IEEE802_11_RADIO datalink types
- added MPTCP decoder

Fri Sep 13 14:00:00 2013 andreas.stiegerAATTgmx.de
- verify source signature

Wed Sep 11 14:00:00 2013 reddwarfAATTopensuse.org
- update to 4.4.0
- RPKI-RTR (RFC6810) is now official (TCP Port 323)
- Fix detection of OpenSSL libcrypto.
- Add DNSSL (RFC6106) support.
- Add \"radius\" as an option for -T.
- Update Action codes for handle_action function according to
802.11s amendment.
- Decode DHCPv6 AFTR-Name option (RFC6334).
- Updates for Babel.
- Fix printing of infinite lifetime in ICMPv6.
- Added support for SPB, SPBM Service Identifier, and Unicast
Address sub-TLV in ISIS.
- Decode RIPv2 authentication up to RFC4822.
- Fix RIP Request/full table decoding issues.
- On Linux systems with cap-ng.h, drop root privileges
using Linux Capabilities.
- Add support for reading multiple files.

Fri Jun 15 14:00:00 2012 jslabyAATTsuse.de
- remove tcpdump-4.0.0-uninitialized.patch, it\'s solved differently

Thu Jun 14 14:00:00 2012 jslabyAATTsuse.de
- update to 4.3.0
- fixes for forces: SPARSE data (per RFC 5810)
- some more test cases added
- updates to documentation on -l, -U and -w flags.
- Fix printing of BGP optional headers.
- Tried to include DLT_PFSYNC support, failed due to headers required.
- added TIPC support.
- Fix LLDP Network Policy bit definitions.
- fixes for IGMPv3\'s Max Response Time: it is in units of 0.1 second.
- SIGUSR1 can be used rather than SIGINFO for stats
- permit -n flag to affect print-ip for protocol numbers
- ND_OPT_ADVINTERVAL is in milliseconds, not seconds
- Teach PPPoE parser about RFC 4638

Tue Jan 3 13:00:00 2012 puzelAATTsuse.com
- update to 4.2.1
- Only build the Babel printer if IPv6 is enabled.
- Support Babel on port 6696 as well as 6697.
- Include ppi.h in release tarball.
- Include all the test files in the release tarball, and don\'t
\"include\" test files that no longer exist.
- Don\'t assume we have - check for it.
- Support \"-T carp\" as a way of dissecting IP protocol 112 as CARP
rather than VRRP.
- Support Hilscher NetAnalyzer link-layer header format.
- Constify some pointers and fix compiler warnings.
- Get rid of never-true test.
- Fix an unintended fall-through in a case statement in the ARP
printer.
- Fix several cases where sizeof(sizeof(XXX)) was used when just
sizeof(XXX) was intended.
- Make stricter sanity checks in the ES-IS printer.
- Get rid of some GCCisms that caused builds to fail with compilers
that don\'t support them.
- Fix typo in man page.
- Added length checks to Babel printer.
- drop tcpdump-4.2.0-ppi.patch (upstream)

Mon Nov 28 13:00:00 2011 vcizekAATTsuse.com
- update to 4.2.0

* patch that adds missing ppi.h

* Summary for 4.2.0
- merged 802.15.4 decoder from Dmitry Eremin-Solenikov at gmail dot com>
- updates to forces for new port numbers
- Use \"-H\", not \"-h\", for the 802.11s option. (-h always help)
- Better ICMPv6 checksum handling.
- add support for the RPKI/Router Protocol, per -ietf-sidr-rpki-rtr-12
- get rid of uuencoded pcap test files, git can do binary.
- sFlow changes for 64-bit counters.
- fixes for PPI packet header handling and printing.
- Add DCB Exchange protocol (DCBX) version 1.01.
- Babel dissector, from Juliusz Chroboczek and Grégoire Henry.
- improvements to radiotap for rate values > 127.
- Many improvements to ForCES decode, including fix SCTP TML port
- updated RPL type code to RPL-17 draft
- Improve printout of DHCPv6 options.
- added support and test case for QinQ (802.1q VLAN) packets
- Handle DLT_IEEE802_15_4_NOFCS like DLT_IEEE802_15_4.
- Build fixes for Sparc and other machines with alignment restrictions.
- Merged changes from Debian package.
- PGM: Add ACK decoding and add PGMCC DATA and FEEDBACK options.
- Build fixes for OSX (Snow Leopard and others)
- Add support for IEEE 802.15.4 packets

* Summary for 4.1.2 tcpdump release
- If -U is specified, flush the file after creating it, so it\'s
not zero-length
- Fix TCP flags output description, and some typoes, in the man
page
- Add a -h flag, and only attempt to recognize 802.11s mesh
headers if it\'s set
- When printing the link-layer type list, send
*all
* output to
stderr
- Include the CFLAGS setting when configure was run in the
compiler flags

Tue Apr 6 14:00:00 2010 puzelAATTnovell.com
- update to tcpdump-4.1.1

* Don\'t blow up if a zero-length link-layer address is passed to
linkaddr_string()

* Fix printing of MAC addresses for VLAN frames with a length
field

* Add some additional bounds checks and use the EXTRACT_ macros
more

* Add a -b flag to print the AS number in BGP packets in ASDOT
notation rather than ASPLAIN notation

* Add ICMPv6 RFC 5006 support

* Decode the access flags in NFS access requests

* Handle the new DLT_ for memory-mapped USB captures on Linux

* Make the default snapshot (-s) the maximum

* Print name of device (when -L is used)

* Print new TCP flags

* Add support for RPL DIO

* Add support for TCP User Timeout (UTO)

* Add support for non-standard Ethertypes used by 3com PPPoE gear

* Add support for 802.11n and 802.11s

* Add support for Transparent Ethernet Bridge ethertype in GRE

* Add 4 byte AS support for BGP printer

* Add support for the MDT SAFI 66 BG printer

* Add basic IPv6 support to print-olsr

* Add USB printer

* Add printer for ForCES

* Handle frames with an FCS

* Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames

* Fix TCP sequence number printing

* Report 802.2 packets as 802.2 instead of 802.3
- drop tcpdump-4.0.0-autoconf.patch (not needed with new autoconf)
- compile with -fno-strict-aliasing

Wed Jan 14 13:00:00 2009 prusnakAATTsuse.cz
- updated to 4.0.0

* Add support for Bluetooth Sniffing

* Add support for Realtek Remote Control Protocol (openrrcp.org.ru)

* Add support for 802.11 AVS

* Add support for SMB over TCP

* Add support for 4 byte BGP AS printing

* Add support for compiling on case-insensitive file systems

* Add support for ikev2 printing

* Update support for decoding AFS

* Update DHCPv6 printer

* Use newer libpcap API\'s (allows -B option on all platforms)

* Add -I to turn on monitor mode

* Bugfixes in lldp, lspping, dccp, ESP, NFS printers

* Cleanup unused files and various cruft
- dropped obsoleted juniper.patch (included in update)

Tue Jan 8 13:00:00 2008 prusnakAATTsuse.cz
- updated to 3.9.8

* Rework ARP printer

* Rework OSPFv3 printer

* Add support for Frame-Relay ARP

* Decode DHCP Option 121 (RFC 3442 Classless Static Route)

* Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121

* TLV: Add support for Juniper .pcap extensions

* Print EGP header in new-world-order style

* Converted print-isakmp.c to NETDISSECT

* Moved AF specific stuff into af.h

* Test subsystem now table driven, and saves outputs and diffs to one place

* Require for pf definitions - allows reading of pflog formatted
libpcap files on an OS other than where the file was generated