|
|
 |
|
|
Changelog for mdadm-3.4-14.el7.x86_64.rpm :
Tue Sep 27 14:00:00 2016 Jes Sorensen - 3.4-14
- The fix for 1331709 caused a problem with container arrays (IMSM) as
these can show up with a valid size of 0. Work around this to only
exit for non container arrays.
- Resolves rhbz#1379194
Wed Sep 14 14:00:00 2016 Jes Sorensen - 3.4-13
- Make udev-md-array-arrays.rules more resilient to races if arrays are
assembled and stopped and reassembled quick after each other.
- Resolves rhbz#1331709
Thu Aug 25 14:00:00 2016 Jes Sorensen - 3.4-12
- Apply additional required patch to fix buffer overrun using long device
names
- Resolves rhbz#1369891
Wed Aug 24 14:00:00 2016 Jes Sorensen - 3.4-11
- Fix problem when creating more than 127 md arrays leading to overruns
- Resolves rhbz#1369891
Thu Aug 11 14:00:00 2016 Jes Sorensen - 3.4-10
- Fix fix to enable security through obscurity
- Resolves rhbz#1225025
Tue Aug 9 14:00:00 2016 Xiao Ni - 3.4-9
- Fix problem about reshape stuck at beginning
- Resolves rhbz#1172937
Fri Aug 5 14:00:00 2016 Jes Sorensen - 3.4-8
- Disable support for creating and reshaping into arrays with journals.
- Resolves rhbz#1360464
Mon Jun 20 14:00:00 2016 Jes Sorensen - 3.4-7
- Fix problem with mdadm large device names overflowing an internal buffer
- Resolves rhbz#1347749
Mon Jun 20 14:00:00 2016 Jes Sorensen - 3.4-6
- Fix problem with reshaping IMSM arrays, where a new reshape could be
launched before the first reshape had fully completed, leading to
unpected results.
- Resolves rhbz#1347762
Thu Jun 9 14:00:00 2016 Jes Sorensen - 3.4-5
- Enable security through obscurity
- Resolves rhbz#1225025
Thu Jun 9 14:00:00 2016 Jes Sorensen - 3.4-4
- Fix problem with raid0 arrays not being detected by Anaconda due to it
setting MALLOC_PERTURB_
- Resolves rhbz#1324637
Thu Apr 28 14:00:00 2016 Xiao Ni - 3.4-3
- Fix Degraded Raid1 array becomes inactive after rebooting
- Resolves rhbz#1290494
Tue Mar 1 13:00:00 2016 Jes Sorensen - 3.4-2
- Fix problem where it was not possible to stop an IMSM array during reshape
- Resolves rhbz#1312837
Tue Feb 9 13:00:00 2016 Xiao Ni - 3.4-1
- Update to mdadm-3.4
- Resolves rhbz#1273351
Thu Sep 17 14:00:00 2015 Xiao Ni - 3.3.2-6
- Fix issue reshape is stuck
- Resolves rhbz#1246035
Tue Aug 25 14:00:00 2015 Jes Sorensen - 3.3.2-5
- Add support for IMSM over NVME storage
- Resolves rhbz#1173504
Thu Jul 2 14:00:00 2015 Xiao Ni - 3.3.2-4
- Fix issue mdadm --grow --size does not work for >2TB
- Resolves rhbz#1236538
Tue Mar 24 13:00:00 2015 Jes Sorensen - 3.3.2-3
- Fix issue where migration record was not always cleared after successful
reshape.
- Resolves rhbz#1183724
Mon Jan 19 13:00:00 2015 Jes Sorensen - 3.3.2-2
- Do not install 64-md-raid-assembly.rules
- Resolves rhbz#1181620
Wed Aug 27 14:00:00 2014 Jes Sorensen - 3.3.2-1
- Update to upstream mdadm-3.3.2
- Resolves rhbz#1085533
Fri Jul 25 14:00:00 2014 Jes Sorensen - 3.2.6-33
- Fix problem with spare disk not being added correctly to IMSM array
because mdmon is unable to write metadata to it.
- Resolves bz1072979
Thu Jul 24 14:00:00 2014 Jes Sorensen - 3.2.6-32
- Fix issue with mdmon not being launched correctly after reboot
during container reshape second of a second RAID5 array, resulting in
it being read-only and cannot be mounted.
- Resolves bz1074970
Mon Mar 10 13:00:00 2014 Jes Sorensen - 3.2.6-31
- Fix problem of IMSM platform capabilities not being detected in UEFI
mode when only the second SATA controller is enabled.
- Resolves bz1074161
Mon Mar 3 13:00:00 2014 Jes Sorensen - 3.2.6-30
- Fix problem where Resync and recovery of RAID10 stopped at more than
50% does not continue after reassemblation
- Resolves bz1068154
Wed Jan 29 13:00:00 2014 Jes Sorensen - 3.2.6-29
- Fix problem with mdadm crashing, if trying to create an IMSM array, with
missing devices.
- Resolves bz1056466
Wed Jan 29 13:00:00 2014 Jes Sorensen - 3.2.6-28
- Fix problem with policy with path=
* not working if there is no
/dev/disk/by-path/ directory, as is the case with (S)ATA only systems
- Resovles bz1045510
Wed Jan 29 13:00:00 2014 Jes Sorensen - 3.2.6-27
- Fix problem with failed disk staying available in IMSM volume/container
- Resolves bz1052904
Wed Jan 29 13:00:00 2014 Jes Sorensen - 3.2.6-26
- Fix problem with reshape not proceeding after reboot on RAID 0 and RAID 5
- Resolves bz1046064
Fri Jan 24 13:00:00 2014 Daniel Mach - 3.2.6-25
- Mass rebuild 2014-01-24
Fri Dec 27 13:00:00 2013 Daniel Mach - 3.2.6-24
- Mass rebuild 2013-12-27
Thu Nov 21 13:00:00 2013 Jes Sorensen - 3.2.6-23
- Fix problem with rebuild not restarting on stopped RAID1/10 IMSM arrays
- Resolves bz1032911
Thu Oct 10 14:00:00 2013 Jes Sorensen - 3.2.6-22
- Check for DM_UDEV_DISABLE_OTHER_RULES_FLAG instead of
DM_UDEV_DISABLE_DISK_RULES_FLAG in 65-md-incremental.rules
- Resolves bz1015515
Thu Aug 29 14:00:00 2013 Jes Sorensen - 3.2.6-21
- Fix pointless rpmbuild noise over mismatching date info
- Remove Fedora 17 support
- Fix problem where first stop command doesn\'t stop container during
IMSM volume\'s bz956059
Wed Apr 24 14:00:00 2013 Jes Sorensen - 3.2.6-19
- Fix problem where rebuild of IMSM RAID5 volume started in OROM,
does not proceed in OS
- Resolves bz956021 (f18), bz956026 (f17), bz956031 (f19)
Tue Apr 23 14:00:00 2013 Jes Sorensen - 3.2.6-18
- Fix problem with IMSM metadata where resync progress would be lost
if an array was stopped during ongoing expansion of a RAID1/5 volume.
- Resolves bz948745
Tue Apr 23 14:00:00 2013 Jes Sorensen - 3.2.6-17
- Reorder patches to allow for udev query patch to be applied on
Fedora 17 as well.
Mon Apr 22 14:00:00 2013 Jes Sorensen - 3.2.6-16
- Rely on rpm macros to place files in correct directories, and match /usr
move
- Resolves bz955248
Thu Mar 7 13:00:00 2013 Jes Sorensen - 3.2.6-15
- Cleanup .spec file handling of different Fedora versions
- Resolves bz914629
Tue Feb 5 13:00:00 2013 Jes Sorensen - 3.2.6-14
- Resync with final version of upstream patches for launching mdmon
via systemctl. Require dracut 024-025 or later to match.
- Resolves bz879327
Fri Feb 1 13:00:00 2013 Jes Sorensen - 3.2.6-13
- Update to upstream solution for launching mdmon via systemctl
- Resolves bz879327
Mon Jan 21 13:00:00 2013 Jes Sorensen - 3.2.6-12
- Launch mdmon via systemctl to avoid it ending up in the wrong cgroup
and getting killed in the boot process when switching from the
initrd to the real root.
- Resolves bz879327
Tue Jan 8 13:00:00 2013 Jes Sorensen - 3.2.6-11
- Move code to leave udev cgroup into mdmon and excute it after we
work, to make sure it actually does the right thing.
Mon Jan 7 13:00:00 2013 Jes Sorensen - 3.2.6-10
- Fix mdmonitor-takeover.service dangling symlink problem for real
Mon Jan 7 13:00:00 2013 Jes Sorensen - 3.2.6-9
- Reintroduce fix for removing dangling symlink of
mdmonitor-takeover.service which got lost in the fix introduced in
3.2.6-8
Fri Jan 4 13:00:00 2013 Jes Sorensen - 3.2.6-8
- mdmonitor-takeover.service is obsolete with the --offroot support,
and it is harmful as of 3.2.6
- Resolves bz834245
Mon Dec 10 13:00:00 2012 Jes Sorensen - 3.2.6-7
- Fix issue with udev scripts where if an raid volume with one of
the disks failing, the failed disk is still present in the volume
and container. The raid volume stays is in normal state (should be
degraded) and the rebuild cannot start.
- Resolves bz886123
Mon Dec 10 13:00:00 2012 Jes Sorensen - 3.2.6-5
- mdadm-sysvinit is obsolete given that we no longer support booting
using sysvinit scripts
- Resolves bz884993
Mon Dec 10 13:00:00 2012 Jes Sorensen - 3.2.6-4
- Fix typo in error message in fix for 880972. No functional changes
Fri Nov 30 13:00:00 2012 Jes Sorensen - 3.2.6-3
- Disallow creating a second IMSM RAID array size 0 (bz880972)
- Disallow creating IMSM RAIDs that spans multiple controllers (bz880974)
- Resolves bz880972, bz880974
Thu Nov 15 13:00:00 2012 Doug Ledford - 3.2.6-2
- Modify mdadm to set the cgroup of mdmon to systemd if it\'s available
- Related bz873576 (and others)
Thu Oct 25 14:00:00 2012 Jes Sorensen - 3.2.6-1
- Upgrade to mdadm-3.2.6
- Resolves bz869930
Fri Oct 19 14:00:00 2012 Jes Sorensen - 3.2.5-14
- Dummy update to work around bodhi breakage. No actual code changes.
Fri Oct 19 14:00:00 2012 Jes Sorensen - 3.2.5-13
- Relax installation requirements for abrt script to only depend on
libreport-filesystem rather than the full abrt package
Thu Oct 18 14:00:00 2012 Jes Sorensen - 3.2.5-12
- Add abrt script to retrieve /proc/mdstat output in case of crash
- Resolves bz867842
Wed Oct 17 14:00:00 2012 Jes Sorensen - 3.2.5-11
- Remove package requirements for udev and initscripts for F18+
- Resolves bz864562
Wed Oct 3 14:00:00 2012 Jes Sorensen - 3.2.5-9
- Resolve issue with ambiguous licenses
- Resolves bz862761
Mon Sep 10 14:00:00 2012 Jes Sorensen - 3.2.5-8
- Switch to using new systemd macros for F18+
- Resolves bz850202
Thu Aug 2 14:00:00 2012 Jes Sorensen - 3.2.5-7
- Remove bogus rogue patch applied in 3.2.5-5 with justification and
without following the structure of the mdadm package.
Fri Jul 27 14:00:00 2012 Fedora Release Engineering - 3.2.5-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
Wed Jul 18 14:00:00 2012 Karsten Hopp 3.2.5-5
- include in some to avoid type clashes.
same problem as rhbz #840902
Mon Jul 16 14:00:00 2012 Jes Sorensen - 3.2.5-4
- Move /etc/tmpfiles.d/mdadm.conf to /lib/tmpfiles.d/ to comply with
Fedora tmpfile rules
- Resolves bz840187
Mon Jun 25 14:00:00 2012 Jes Sorensen - 3.2.5-3
- Fix problem where reshape of RAID volume is broken after trying to
stop all MD devices.
- Enhance raid-check to allow the adming to specify the max number of
concurrent arrays to be checked at any given time.
- Resolves bz830177, bz820124
Wed Jun 13 14:00:00 2012 Jes Sorensen - 3.2.5-2
- Fix uninstall script to remove dangling symlink to
mdmonitor-takeover.service, if the mdadm package is uninstalled from
the system.
- Resolves bz828354
Mon May 21 14:00:00 2012 Jes Sorensen - 3.2.5-1
- Upgrade to mdadm-3.2.5
- Resolves bz822850
Tue May 15 14:00:00 2012 Jes Sorensen - 3.2.4-3
- Fix mdadm-3.2.4 introduced bug where --add fails in common cases
- Resolves bz821717 (f17) bz821718 (f16) bz821719 (f15)
Thu May 10 14:00:00 2012 Jes Sorensen - 3.2.4-2
- Fix mdadm.conf to use \'d\' for /var/run/mdadm creation, to avoid the
map file getting deleted during boot.
Thu May 10 14:00:00 2012 Jes Sorensen - 3.2.4-1
- Upgrade to mdadm-3.2.4
- Resolves bz820534 (rawhide) bz820527 (f17) bz820531 (f16) bz820532 (f15)
Mon Apr 30 14:00:00 2012 Jes Sorensen - 3.2.3-9
- Fix Monitor mode sometimes crashes when a resync completes
- Fix missing symlink for mdadm container device when incremental creates
the array
- Make sure when creating a second array in a container that the second
array uses all available space since leaving space for a third array
is invalid
- Validate the number of imsm volumes per controller
- Fix issues with imsm arrays and disks larger than 2TB
- Add support for expanding imsm arrays/containers
- The support for expanding imsm arrays/containers was accepted upstream,
update to the official patches from there
- Fix for the issue of --add not being very smart
- Fix an issue causing rebuilds to fail to restart on reboot (data
corrupter level problem)
- Reset the bad flag on map file updates
- Correctly fix failure when trying to add internal bitmap to 1.0 arrays
- Resolves: bz817023 (f17) bz817024 (f17) bz817026 (f17) bz817028 (f17)
- Resolves: bz817029 (f17) bz817032 (f17) bz817038 (f17) bz808774 (f17)
- Resolves: bz817039 (f17) bz817042 (f17)
Mon Apr 30 14:00:00 2012 Jes Sorensen - 3.2.3-8
- Fix bug where IMSM arrays stay inactive in case a reboot is
- performed during the reshape process.
- Resolves: bz817522 (f17) bz817535 (f16) bz817537 (f15)
Wed Mar 28 14:00:00 2012 Jes Sorensen - 3.2.3-7
- Fix issue when re-adding drive to a raid1 array with bitmap
- Resolves: bz807743 (f17) bz769323 (f16) bz791159 (f15)
Thu Feb 23 13:00:00 2012 Jes Sorensen - 3.2.3-6
- Fix double free on buggy old kernel sysfs read
- Fix segfault if trying to write superblock to non existing device
- Resolves: bz795707 (f17) bz795747 (f16) bz795748 (f15)
- Resolves: bz795461 (f17) bz795749 (f16) bz795750 (f15)
Thu Feb 16 13:00:00 2012 Jes Sorensen - 3.2.3-5
- Fix issue with devices failing to be added to a raid using bitmaps,
due to trying to write the bitmap with mis-aligned buffers using
O_DIRECT
- Resolves: bz789898 (f16) bz791189 (f15)
Mon Jan 30 13:00:00 2012 Jes Sorensen - 3.2.3-4
- Add support for --offroot to mdadm/mdmon
- Resolves: bz785739 (rawhide) bz785737 (f16) bz771405 (f15)
Thu Jan 12 13:00:00 2012 Jes Sorensen - 3.2.3-3
- Fix case where we have to retry in case a remove fails due to an array
being busy
- Resolves: bz773337 (rawhide) bz773340 (f16) bz773341 (f15)
Thu Jan 5 13:00:00 2012 Jes Sorensen - 3.2.3-2
- Workaround for gcc-4.7 strict aliasing breaking the build
Wed Jan 4 13:00:00 2012 Jes Sorensen - 3.2.3-1
- Update to upstream 3.2.3
- Resolves: bz770110 (rawhide) bz771413 (f16) bz759014 (rawhide)
- Resolves: bz759015 (f16) bz759035 (rawhide) bz759036 (f16)
- Resolves: bz771608 (f15) bz759016 (f15) bz759039 (f15)
Mon Nov 21 13:00:00 2011 Jes Sorensen - 3.2.2-15
- Backport upstream fix for memory leak that can prevent migration to
RAID5 from completing.
- Backport upstream fix preventing mounting a device while it is in
process of reshaping
- Resolves: bz755005 bz755009
Wed Nov 9 13:00:00 2011 Jes Sorensen - 3.2.2-14
- Backport upstream fixes to prevent growing v0.90 metadata raid out
of supported size.
- Add missing \'disable\' argument to systemctl in preun script
- Resolves: bz735306 (Fedora 15) bz748731 (Fedora 16) bz748732 (rawhide),
Resolves: bz751716
Wed Oct 26 14:00:00 2011 Fedora Release Engineering - 3.2.2-13
- Rebuilt for glibc bug#747377
Sat Oct 22 14:00:00 2011 Jes Sorensen - 3.2.2-12
- Backport upstream version of fix for IMSM RAID assembly problem,
which resolves issues when booting off sysvinit based system.
- Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16)
Wed Oct 19 14:00:00 2011 Jes Sorensen - 3.2.2-11
- Fix systemd dependency problem
- Resolves: bz741115 (F16) bz744226 (rawhide)
Wed Oct 19 14:00:00 2011 Jes Sorensen - 3.2.2-10
- Fix problem where a dirty IMSM RAID isn\'t assembled correctly during
boot, preventing booting from this RAID device.
- Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16)
- Fix race between udev and mdadm when assembling md device using
mdadm -I, where udev would spawn an additional mdadm command to
perform the assembly in parallel.
Wed Aug 31 14:00:00 2011 Doug Ledford - 3.2.2-9
- Fix boot with older imsm arrays that have an unused attribute set
- Resolves: bz729205
Thu Aug 25 14:00:00 2011 Doug Ledford - 3.2.2-8
- Rework the 65-md-incremental.rules file to add the following support:
Nested md raid arrays should now work
MD on top of LUKS or other lvm based devices should now work
We should no longer grab multipath paths before multipath can
Wed Jul 27 14:00:00 2011 Doug Ledford - 3.2.2-7
- Fix a bug with readding a device
- Fix a bug with writemostly flag handling
Mon Jul 18 14:00:00 2011 Doug Ledford - 3.2.2-6
- Bump and rebuild again
Fri Jul 15 14:00:00 2011 Doug Ledford - 3.2.2-5
- Bump and rebuild to keep version ahead of f15 version
Thu Jul 14 14:00:00 2011 Doug Ledford - 3.2.2-4
- Fix minor issue in man page
- Resolves: bz717795
Thu Jul 7 14:00:00 2011 Milan Broz - 3.2.2-3
- Use unit files with systemd. (johannbg)
- Add sub-package sysvinit for SysV init script.
- Resolves: bz713573
Wed Jul 6 14:00:00 2011 Milan Broz - 3.2.2-2
- Fix build on PPC.
- Resolves: bz719380
Tue Jun 28 14:00:00 2011 Milan Broz - 3.2.2-1
- Update to latest upstream version
- Resolves: bz714083
Tue Jun 14 14:00:00 2011 Doug Ledford - 3.2.1-5
- Fix for bz710646
Thu Mar 31 14:00:00 2011 Doug Ledford - 3.2.1-4
- Somehow the 64-md-raid.rules file went missing. Put it back.
- Resolves: bz692248
Thu Mar 31 14:00:00 2011 Doug Ledford - 3.2.1-3
- Fix mdmonitor init script setup of SELinux on PIDPATH
- Resolves: bz692559
Mon Mar 28 14:00:00 2011 Doug Ledford - 3.2.1-2
- Restore build command to sane command instead of test command
Mon Mar 28 14:00:00 2011 Doug Ledford - 3.2.1-1
- Update to latest upstream version
- Resolves: 691353
Fri Mar 25 13:00:00 2011 Doug Ledford - 3.1.5-1
- Update to latest upstream stable release
- Update mdadm.rules file to honor noiswmd and nodmraid command line options
- Ghost the directory in /var/run, create /var/run/mdadm in mdmonitor init
script
- Don\'t report mismatch counts on either raid1 or raid10
- Check both active and idle arrays during raid check runs
- Move the raid-check script from cron.weekly to /usr/sbin, add a crontab
file to /etc/cron.d and mark it config(noreplace). This way users can
select their own raid-check frequency and have it honored through
upgrades.
- Allow the raid-check script to set the process and io priority of the
thread performing the check in order to preserve responsiveness of the
machine during the check.
- Resolves: 633229, 656620. 679843, 671076, 659933
Tue Feb 8 13:00:00 2011 Fedora Release Engineering - 3.1.3-0.git20100804.2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
Wed Aug 4 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100804.2
- Add udev patch to not have incremental assembly in two rules files
Wed Aug 4 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100804.1
- Update to latest upstream release (resolves an issue with stale lock
files on the md device map file)
Thu Jul 22 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100722.2
- Remove the glibc-static buildreq and don\'t build the static mdadm since
we don\'t install it anyway
- Remove the udev file since adding it was supposed to be a rawhide only change
Thu Jul 22 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100722.1
- Change git date format to the correct format (YYYYMMDD)
- Update to latest upstream push (fixes bz604023)
Tue Jul 20 14:00:00 2010 Doug Ledford - 3.1.3-0.git07202010.2
- Fix racy locking of mapfile (bz616596)
Tue Jul 20 14:00:00 2010 Doug Ledford - 3.1.3-0.git07202010.1
- Update to latest git repo (3.1.2 plus pending changes, fixes bz602457)
- Add in 64-md-raid.rules to compensate for it no longer being in udev
(bz581905)
- Remove mdadm.static as its no longer used in initrd creation
Tue Apr 13 14:00:00 2010 Doug Ledford - 3.1.2-10
- Minor update to mdadm.rules to make anaconda happy
Thu Apr 8 14:00:00 2010 Doug Ledford - 3.1.2-9
- Slight fix on container patch
Thu Apr 8 14:00:00 2010 Doug Ledford - 3.1.2-8
- Updated container patch that also enables mdadm -IRs for imsm devices
Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-7
- Fix up directory in mdmonitor init script so that we restart mdmon like we
are supposed to
- Add a rule to run incremental assembly on containers in case there are
multiple volumes in a container and we only started some of them in the
initramfs
- Make -If work with imsm arrays. We had too restrictive of a test in
sysfs_unique_holder.
- Make incremental assembly of containers act like incremental assembly of
regular devices (aka, --run is needed to start a degraded array)
Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-6
- Typo in new rules file
Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-5
- Enable incremental support for imsm devices
Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-4
- One line fix for ppc64 compiles
Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-3
- Clean up directory mess once and for all
- Add incremental remove support
Wed Mar 17 13:00:00 2010 Doug Ledford - 3.1.2-2
- Add a little more paranoia checking to the RebuildMap code to avoid ever
having the same infinite loop as in bz569019 again even if we change file
locations to somewhere where we can\'t create a mapfile
Tue Mar 16 13:00:00 2010 Doug Ledford - 3.1.2-1
- Grab latest upstream release instead of git repo snapshot (bz552344, bz572561)
- The lack of /dev/md is causing problems, so add code to mapfile.c to cause
us to create /dev/md if it doesn\'t exist (bz569019)
Tue Feb 23 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.6
- Newer version of imsm patch that leaves warning, but only when there
actually are too many devices on the command line (bz554974)
Sun Feb 21 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.5
- The uuid patch cause a different problem during assembly, so use a gross
hack to work around the uuid issue that won\'t break assembly until fixed
properly upstream (bz567132)
Sun Feb 21 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.4
- Fix problem with booting multiple imsm containers when they aren\'t listed
\"just so\" in the mdadm.conf file (bz554974)
Fri Feb 19 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.3
- Don\'t run the raid-check script if the kernel doesn\'t support
md devices (bz557053)
- Don\'t report any mismatch_cnt issues on raid1 devices as there are
legitimate reasons why the count may not be 0 and we are getting enough
false positives that it renders the check useless (bz554217, bz547128)
Thu Feb 18 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.2
- Fix s390/ppc64 UUID byte swap issue
Wed Feb 17 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.1
- Update to head of upstream git repo, which contains a significant number
of bug fixes we need (bz543746)
Fri Jan 15 13:00:00 2010 Doug Ledford - 3.0.3-3
- Fix crash when AUTO keyword is in mdadm.conf (bz552342)
Tue Dec 1 13:00:00 2009 Doug Ledford - 3.0.3-2
- Minor tweak to init script for LSB compliance (bz527957)
Wed Nov 4 13:00:00 2009 Doug Ledford - 3.0.3-1
- New upstream release 3.0.3 (bz523320, bz527281)
- Update a couple internal patches
- Drop a patch in that was in Neil\'s tree for 3.0.3 that we had pulled for
immediate use to resolve a bug
- Drop the endian patch because it no longer applied cleanly and all attempts
to reproduce the original problem as reported in bz510605 failed, even up
to and including downloading the specific package that was reported as
failing in that bug and trying to reproduce with it on both ppc and ppc64
hardware and with both ppc and ppc64 versions on the 64bit hardware.
Without a reproducer, it is impossible to determine if a rehashed patch
to apply to this code would actually solve the problem, so remove the patch
entirely since the original problem, as reported, was an easy to detect DOA
issue where installing to a raid array was bound to fail on reboot and so
we should be able to quickly and definitively tell if the problem resurfaces.
- Update the mdmonitor init script for LSB compliance (bz527957)
- Link from mdadm.static man page to mdadm man page (bz529314)
- Fix a problem in the raid-check script (bz523000)
- Fix the intel superblock handler so we can test on non-scsi block devices
Fri Oct 2 14:00:00 2009 Hans de Goede - 3.0.2-1
- New upstream release 3.0.2
- Add a patch fixing mdadm --detail -export segfaults (bz526761, bz523862)
- Add a patch making mdmon store its state under /dev/.mdadm for initrd
mdmon, rootfs mdmon handover
- Restart mdmon from initscript (when running) for rootfs mdmon handover
Thu Sep 17 14:00:00 2009 Doug Ledford - 3.0-4
- Stop some mdmon segfaults (bz523860)
Tue Sep 15 14:00:00 2009 Doug Ledford - 3.0-3
- Update to current head of upstream git repo for various imsm related fixes
(fixes bz523262)
- Fix display of metadata version in output of Detail mode
- Add UUID output to --detail --export (bz523314)
Fri Jul 24 14:00:00 2009 Doug Ledford - 3.0-2
- Improved raid-check script as well as the ability to configure what devices
get checked
- Endian patch for uuid generation
Mon Jun 29 14:00:00 2009 Doug Ledford - 3.0-1
- Remove stale patches already accepted by upstream
- Fix the raid-check script to only try and check a device if it is
checkable
- Update to official mdadm-3.0 version
- Resolves: bz505587, bz505552
Tue May 19 14:00:00 2009 Doug Ledford - 3.0-0.devel3.7
- Move the mdadm.map file from /dev/md/ to /dev/ so the installer doesn\'t
need to precreate the /dev/md/ directory in order for incremental
assembly to work
Tue May 19 14:00:00 2009 Doug Ledford - 3.0-0.devel3.6
- Only check raid devices automatically, do not attempt to repair them
during the weekly data scrubbing
Fri Mar 20 13:00:00 2009 Doug Ledford - 3.0-0.devel3.5
- Fix a few issues with the new code to determine when a device gets to
keep its name and when it doesn\'t
Fri Mar 20 13:00:00 2009 Doug Ledford - 3.0-0.devel3.4
- Change the perms on the udev rules file, it doesn\'t need to be +x
Fri Mar 20 13:00:00 2009 Doug Ledford - 3.0-0.devel3.3
- Slightly tweak the udev rules to make sure we don\'t start arrays
while running in rc.sysinit...leave array starting to it instead
- Modify mdadm to put its mapfile in /dev/md instead of /var/run/mdadm
since at startup /var/run/mdadm is read-only by default and this
breaks incremental assembly
- Change how mdadm decides to assemble incremental devices using their
preferred name or a random name to avoid possible conflicts when plugging
a foreign array into a host
Wed Mar 18 13:00:00 2009 Doug Ledford - 3.0-0.devel3.2
- Change around the mdadm udev rules we ship to avoid a udev file conflict
Tue Mar 17 13:00:00 2009 Doug Ledford - 3.0-0.devel3.1
- Update to latest devel release
- Remove the no longer necessary udev patch
- Remove the no longer necessary warn patch
- Remove the no longer necessary alias patch
- Update the mdadm.rules file to only pay attention to device adds, not
changes and to enable incremental assembly
- Add a cron job to run a weekly repair of the array to correct bad sectors
- Resolves: bz474436, bz490972
Wed Feb 25 13:00:00 2009 Fedora Release Engineering - 3.0-0.devel2.2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
Thu Feb 19 13:00:00 2009 Doug Ledford - 3.0-0.devel2.2
- Readd our old mdadm rules file that does incremental assembly
- Remove the new mdadm rules file from upstream as we already have this in
our udev package (and the one in the udev package already has a bug fixed)
Thu Feb 12 13:00:00 2009 Doug Ledford - 3.0-0.devel2.1
- Update to latest upstream devel release
- Use the udev rules file included with mdadm instead of our own
- Drop all the no longer relevant patches
- Fix a build error in mdopen.c
- Fix the udev rules path in Makefile
- Fix a compile issue with the __le32_to_cpu() macro usage (bad juju to
to operations on the target of the macro as it could get executed
multiple times, and gcc now throws an error on that)
- Add some casts to some print statements to keep gcc from complaining
Fri Oct 24 14:00:00 2008 Doug Ledford - 2.6.7.1-1
- Updated to latest upstream stable release (#466803)
- Change udev rule to not assemble degraded arrays (#453314)
- Fix metadata matching in config file (#466078)
- Fix assembly of raid10 devices (#444237)
- Fix incremental assembly of partitioned raid devices (#447818)
Thu Jun 26 14:00:00 2008 Doug Ledford - 2.6.7-1
- Update to latest upstream version (should resolve #444237)
- Drop incremental patch as it\'s now part of upstream
- Clean up all the open() calls in the code (#437145)
- Fix the build process to actually generate mdassemble (#446988)
- Update the udev rules to get additional info about arrays being assembled
from the /etc/mdadm.conf file (--scan option) (#447818)
- Update the udev rules to run degraded arrays (--run option) (#452459)
Thu Apr 17 14:00:00 2008 Bill Nottingham - 2.6.4-4
- make /dev/md if necessary in incremental mode (#429604)
- open RAID devices with O_EXCL to avoid racing against other --incremental processes (#433932)
Fri Feb 1 13:00:00 2008 Bill Nottingham - 2.6.4-3
- add a udev rules file for device assembly (#429604)
Fri Jan 18 13:00:00 2008 Doug Ledford - 2.6.4-2
- Bump version and rebuild
Fri Oct 19 14:00:00 2007 Doug Ledford - 2.6.4-1
- Update to latest upstream and remove patches upstream has taken
Tue Aug 28 14:00:00 2007 Fedora Release Engineering - 2.6.2-5
- Rebuild for selinux ppc32 issue.
Mon Jul 9 14:00:00 2007 Doug Ledford - 2.6.2-4
- Oops, if we call -C -e1, minor_version is no longer properly set, fix that
up
- Related: bz230207
Fri Jul 6 14:00:00 2007 Doug Ledford - 2.6.2-3
- Oops, had to update the file leak patch, missed one thing
- Minor tweak to return codes in init script and add LSB header
- Resolves: bz244582, bz246980
Mon Jul 2 14:00:00 2007 Doug Ledford - 2.6.2-2
- Fix a file leak issue when mdadm is in monitor mode
- Update mdadm init script so that status will always run and so
return codes are standards compliant
- Fix assembly of version 1 superblock devices
- Make the attempt to create an already running device have a clearer
error message
- Allow the creation of a degraded raid4 array like we allow for raid5
- Make mdadm actually pay attention to raid4 devices when in monitor mode
- Make the mdmonitor script use daemon() correctly
- Fix a bug where manage mode would not add disks correctly under certain
conditions
- Resolves: bz244582, bz242688, bz230207, bz169516, bz171862, bz171938
- Resolves: bz174642, bz224272, bz186524
Mon Jul 2 14:00:00 2007 Doug Ledford - 2.6.2-1
- Update to latest upstream
- Remove requirement for /usr/sbin/sendmail - it\'s optional and not on by
default, and sendmail isn\'t
*required
* for mdadm itself to work, and isn\'t
even required for the monitoring capability to work, just if you want to
have the monitoring capability do the automatic email thing instead of
run your own program (and if you use the program option of the monitor
capability, your program could email you in a different manner entirely)
Mon Apr 16 14:00:00 2007 Doug Ledford - 2.6.1-4
- More cleanups for merge review process
- Related: bz226134
Wed Apr 11 14:00:00 2007 Doug Ledford - 2.6.1-3
- Various cleanups as part of merge review process
- Related: bz226134
Sat Mar 31 14:00:00 2007 Doug Ledford - 2.6.1-2
- Oops, missing a dependency in the Makefile
Sat Mar 31 14:00:00 2007 Doug Ledford - 2.6.1-1
- Update to latest upstream version
- Resolves: bz233422
Fri Jan 26 13:00:00 2007 Doug Ledford - 2.6-1
- Update to latest upstream version
- Remove the mdmpd daemon entirely. Now that multipath tools from the lvm/dm
packages handles multipath devices well, this is no longer needed.
- Various cleanups in the spec file
Thu Nov 9 13:00:00 2006 Doug Ledford - 2.5.4-3
- Add a fix for the broken printout of array GUID when using the -E --brief
flags
Fri Oct 13 14:00:00 2006 Doug Ledford - 2.5.4-2
- tag present on another branch and can\'t be forcibly moved
required number bump
Fri Oct 13 14:00:00 2006 Doug Ledford - 2.5.4-1
- Update to 2.5.4 (listed as a bugfix update by upstream)
- Remove previous bitmap patch that\'s now part of 2.5.4
Sun Oct 8 14:00:00 2006 Doug Ledford - 2.5.3-2
- Fix a big-endian machine error in the bitmap code (Paul Clements)
Mon Aug 7 14:00:00 2006 Doug Ledford - 2.5.3-1
- Update to 2.5.3 which upstream calls a \"bug fix\" release
Wed Jul 12 14:00:00 2006 Jesse Keating - 2.5.2-1.1
- rebuild
Fri Jul 7 14:00:00 2006 Doug Ledford - 2.5.2-1
- Update to 2.5.2
- Remove auto default patch as upstream now has a preferred default auto method
Wed Mar 8 13:00:00 2006 Peter Jones - 2.3.1-3
- fix build on ppc64
Wed Mar 8 13:00:00 2006 Jeremy Katz - 2.3.1-2
- fix build on ppc
Wed Mar 8 13:00:00 2006 Jeremy Katz - 2.3.1-1
- update to 2.3.1 to fix raid5 (#184284)
Fri Feb 10 13:00:00 2006 Jesse Keating - 2.2-1.fc5.2.1
- bump again for double-long bug on ppc(64)
Tue Feb 7 13:00:00 2006 Jesse Keating - 2.2-1.fc5.2
- rebuilt for new gcc4.1 snapshot and glibc changes
Fri Dec 9 13:00:00 2005 Jesse Keating
- rebuilt
Mon Dec 5 13:00:00 2005 Warren Togami 2.2-1
- 2.2 upgrade (#167897)
- disable diet because we don\'t ship it anymore
and we don\'t actually use mdassemble now
Mon May 16 14:00:00 2005 Doug Ledford 1.11.0-4.fc4
- Make the mdmonitor init script use the pid-file option, major cleanup
of the script now possible (#134459)
Mon May 16 14:00:00 2005 Doug Ledford 1.11.0-3.fc4
- Put back the obsoletes: raidtools that was present in 1.11.0-1.fc4
Mon May 16 14:00:00 2005 Doug Ledford 1.11.0-2.fc4
- Change the default auto= mode so it need not be on the command line to
work with udev, however it is still supported on the command line (#132706)
- Add a man page (from Luca Berra) for mdassemble
Wed May 11 14:00:00 2005 Doug Ledford - 1.11.0-1.fc4
- Upgrade to 1.11.0
Wed Apr 27 14:00:00 2005 Jeremy Katz - 1.9.0-3.fc4
- fix mdmonitor initscript (#144717)
Mon Mar 21 13:00:00 2005 Doug Ledford 1.9.0-2
- Build mdadm.static and mdassemble (static as well) to be used in initrd
images
Wed Mar 9 13:00:00 2005 Doug Ledford 1.9.0-1
- Initial upgrade to 1.9.0 and update of doc files
- Fix an s390 build error
Mon Oct 4 14:00:00 2004 Doug Ledford 1.6.0-2
- Remove /etc/mdadm.conf from the file list. Anaconda will write one out
if it\'s needed.
Fri Oct 1 14:00:00 2004 Doug Ledford 1.6.0-1
- Update to newer upstream version
- Make mdmpd work on kernels that don\'t have the event interface patch
Fri Jul 30 14:00:00 2004 Dan Walsh 1.5.0-11
- Create a directory /var/run/mdadm to contain mdadm.pid
- This cleans up SELinux problem
Tue Jun 15 14:00:00 2004 Elliot Lee
- rebuilt
Sat May 22 14:00:00 2004 Doug Ledford - 1.5.0-9
- Fix Makefile and build method to satisfy bz #123769
- Add mdmpd man page, update mdmpd version to 0.3 - bz #117160
- Make sure mdadm --monitor closes all md device files so that md devices
can be stopped while mdadm is still running - bz #119532
Thu May 20 14:00:00 2004 Jeremy Katz - 1.5.0-8
- remove unneeded patch, can use --run instead
Wed May 19 14:00:00 2004 Jeremy Katz - 1.5.0-7
- add patch with reallyforce mode on creation to be used by anaconda
Wed May 12 14:00:00 2004 Doug Ledford 2.5.0-6
- Fix a bug in the postun scriptlet related to downgrading to a version
of mdadm that doesn\'t include the mdmpd daemon.
Fri May 7 14:00:00 2004 Doug Ledford 1.5.0-5
- Disable service mdmpd by default to avoid [Failed] messages on
current 2.6 kernels. Possibly re-enable it by default once the
2.6 kernels have the md event interface.
Thu Apr 22 14:00:00 2004 Doug Ledford 1.5.0-4
- Update mdmonitor script to start daemon more cleanly
- Repackage mdmpd tarball to include gcc-3.4 changes and to make
mdmpd properly daemonize at startup instead of forking and leaving
the child attached to the terminal.
Thu Mar 4 13:00:00 2004 Bill Nottingham 1.5.0-3
- ship /var/run/mpmpd (#117497)
Thu Feb 26 13:00:00 2004 Doug Ledford 1.5.0-2
- Add a default MAILADDR line to the mdadm.conf file installed by default
(Bugzilla #92447)
- Make it build with gcc-3.4
Mon Feb 23 13:00:00 2004 Doug Ledford 1.5.0-1
- Update to 1.5.0 (from Matthew J. Galgoci )
Sun Nov 16 13:00:00 2003 Doug Ledford 1.4.0-1
- fix problem with recovery thread sleeping in mdmpd
Fri Nov 14 13:00:00 2003 Doug Ledford
- sync upstream
- add mdmpd package into mdadm package
Wed Sep 10 14:00:00 2003 Michael K. Johnson 1.3.0-1
- sync upstream
Tue Mar 11 13:00:00 2003 Michael K. Johnson 1.1.0-1
- sync upstream
Tue Jan 28 13:00:00 2003 Michael K. Johnson 1.0.1-1
- update for rebuild
Wed Dec 25 13:00:00 2002 Tim Powers 1.0.0-8
- fix references to %install in the changelog so that it will build
Fri Dec 13 13:00:00 2002 Elliot Lee 1.0.0-7
- Rebuild
Fri Jul 12 14:00:00 2002 Michael K. Johnson
- Changed RPM Group to System Environment/Base
Wed May 15 14:00:00 2002 Michael K. Johnson
- minor cleanups to the text, conditionalize rm -rf
- added mdmonitor init script
Fri May 10 14:00:00 2002
- update to 1.0.0
- Set CXFLAGS instead of CFLAGS
Sat Apr 6 14:00:00 2002
- change %install to use \"make install\"
Fri Mar 15 13:00:00 2002
- beautification
- made mdadm.conf non-replaceable config
- renamed Copyright to License in the header
- added missing license file
- used macros for file paths
Fri Mar 15 13:00:00 2002 Luca Berra
- Added Obsoletes: mdctl
- missingok for configfile
Tue Mar 12 13:00:00 2002 NeilBrown
- Add md.4 and mdadm.conf.5 man pages
Fri Mar 8 13:00:00 2002 Chris Siebenmann
- builds properly as non-root.
Fri Mar 8 13:00:00 2002 Derek Vadala
- updated for 0.7, fixed /usr/share/doc and added manpage
Tue Aug 7 14:00:00 2001 Danilo Godec
- initial RPM build
|
|
|
