Changelog for firewalld-filesystem-0.4.3.2-8.1.el7_3.2.noarch.rpm :
Wed Feb 8 13:00:00 2017 Thomas Woerner - 0.4.3.2-8.1.el7_3.2
- Fix LOG rule placement for LogDenied (RHBZ#1402932, RHBZ#1421205)

Mon Jan 9 13:00:00 2017 Thomas Woerner - 0.4.3.2-8.1
- Fix ZONE being blanked in ifcfg on reboot (RHBZ#1410860, RHBZ#1381314)

Mon Sep 12 14:00:00 2016 Thomas Woerner - 0.4.3.2-8
- Exclude firewallctl (RHBZ#1374799)

Tue Sep 6 14:00:00 2016 Thomas Woerner - 0.4.3.2-7
- Tolerate ipv6_rpfilter fail (RHBZ#1285769)
- Fix set_rules to copy the rule before extracting the table (RHBZ#1373260)
- Translation update (RHBZ#1273296)
- Conflict with NetworkManager < 1:1.4.0-3.el7 (RHBZ#1366288)

Tue Aug 30 14:00:00 2016 Thomas Woerner - 0.4.3.2-6
- Do not use exit code 254 for {ALREADY,NOT}_ENABLED sequences (RHBZ#1366654)
- Fail with NOT_AUTHORIZED if authorization fails (RHBZ#1368549)
- firewall-cmd: Fix get and set description for permanent zones (RHBZ#1368949)
- Fix loading of service helpers in active zones (RHBZ#1371116)

Tue Aug 16 14:00:00 2016 Thomas Woerner - 0.4.3.2-5
- Print errors and warnings to stderr additional patch (RHBZ#1360894)
- Fixed trace back in firewallctl (RHBZ#1367155)
- Fix client crash if systembus can not be aquired (RHBZ#1367038)
- Make ALREADY_ENABLED a warning (RHBZ#1366654)
- Added conflict to old squid package providing the squid.service file
(RHBZ#1366308)
- Fixed firewall-cmd help typo (RHBZ#1367171)

Wed Aug 10 14:00:00 2016 Thomas Woerner - 0.4.3.2-4
- Fixed firewall-config gettext usage (RHBZ#1361612)
- Fixed ifcfg file reader and writer (RHBZ#1362171)
- Fixed loading ipset entries from file in commands (RHBZ#1365198)
- Added conflicts to old main package to sub packages (RHBZ#1361669)
- Do not show settings of zones etc. without authentication (RHBZ#1357098)
- Fixed CVE-2016-5410 (RHBZ#1359296)

Thu Jul 28 14:00:00 2016 Thomas Woerner - 0.4.3.2-3
- Fix test suite for command change (RHBZ#1360871)
- Fix test suite with stderr usage (RHBZ#1360894)
- Rebuild for wrong docdir without version (RHBZ#1057327#c7)

Wed Jul 27 14:00:00 2016 Thomas Woerner - 0.4.3.2-2
- Updated conflict for selinux-policy (RHBZ#1304723)
- Fixed exit codes in command line clients (RHBZ#1357050)
- Fixed traceback in firewall-cmd without args (RHBZ#1357063)
- Fixed source docs in man pages and help output (RHBZ#1357888)
- Fixed rebuild of changed man pages (RHBZ#1360362)
- Use stderr for errors and warnings in command line tools (RHBZ#1360894)
- Fixed lockdown not denying invalid commands (RHBZ#1360871)

Tue Jul 5 14:00:00 2016 Thomas Woerner - 0.4.3.2-1
- Rebase to 0.4.3.2
- Fix regression with unavailable optional commands
- All missing backend messages should be warnings
- Individual calls for missing restore commands
- Only one authenticate call for add and remove options and also sequences
- RH-Satellite-6 service now upstream
- Conflict for selinux-policy needed to be updated to newer release
(RHBZ#1304723)

Tue Jun 28 14:00:00 2016 Thomas Woerner - 0.4.3.1-1
- Rebase to 0.4.3.1
- firewall.command: Fix python3 DBusException message not interable error
- src/Makefile.am: Fix path in firewall-[offline-]cmd_test.sh while installing
- firewallctl: Do not trace back on list command without further arguments
- firewallctl (man1): Added remaining sections zone, service, ..
- firewallctl: Added runtime-to-permanent, interface and source parser,
IndividualCalls setting
- firewall.server.config: Allow to set IndividualCalls property in config
interface
- Fix missing icmp rules for some zones
- runProg: Fix issue with running programs
- firewall-offline-cmd: Fix issues with missing system-config-firewall
- firewall.core.ipXtables: Split up source and dest addresses for transaction
- firewall.server.config: Log error in case of loading malformed files in
watcher
- Install and package the firewallctl man page

Wed Jun 22 14:00:00 2016 Thomas Woerner - 0.4.3-3
- Readding RH-Satellite-6 service

Wed Jun 22 14:00:00 2016 Thomas Woerner - 0.4.3-2
- Fixed typo in Requires(post)

Wed Jun 22 14:00:00 2016 Thomas Woerner - 0.4.3-1
- Rebase to 0.4.3
- Rebase to the new upstream and new release (RHBZ#1302802)
- New firewallctl command line utility (RHBZ#1147959)
- Adds radius TCP ports (RHBZ#1219717)
- XSD enhancements for conflicting tag specification (RHBZ#1296573)
- Adds port for corosync-qnetd to high-availability service (RHBZ#1347530)

Tue May 31 14:00:00 2016 Thomas Woerner - 0.4.2-1
- Rebase to 0.4.2
- Allows unspecifying zone binding for interfaces in firewall-config
(RHBZ#1066037)
- Adds improved management of zone binding for interfaces, connections and
sources (RHBZ#1083626)
- Adds commands to showing details of zones, services, .. (RHBZ#1147500)
- Adds a default logging option (RHBZ#1147951)
- Adds quiet option for firewall-offline-cmd (RHBZ#1220467)
- Adds support for zone chain usage in direct rules (RHBZ#1136801,
RHBZ#1336881)
- Adds source port support in zones, services and rich rules (RHBZ#1214770)
- Adds services imap and smtps (RHBZ#1220196)
- Fixes runtime to permanent migration(RHBZ#1237242)
- Fixes removal of destination addresses for services in permanent view in
firewall-config (RHBZ#1278281)
- Fixes firewall-config usage over ssh (RHBZ#1281416)
- Fixes reload disconnects with existing connections (RHBZ#1287449)
- Fixes ICMP packet drops while reloading (RHBZ#1288177)
- Adds option to add a new zone, service, .. from existing file (RHBZ#1292926)
- Adds improved checks for file readers, fixes error reporting of strings
containing illegal characters (RHBZ#1303026)
- Transforms direct.passthrough errors into warnings (RHBZ#1301573)
- Reduced getprotobyname and getservbyname calls for NIS use (RHBZ#1305434)
- Fixes (repeated) firewalld reload by sending SIGHUP signal (RHBZ#1313023)
- Adds After=dbus.service to service file to fix shutdown (RHBZ#1313845)
- Adds ICMP block inversion support (RHBZ#1325335)
- Fixes local traffic issue with masquerading in default zone (RHBZ#1326130)
- Adds destination rich rules without an element (RHBZ#1326462)
- Fixes reload after default zone change to newly introduced zone (RHBZ#1273888)
- Fixes start without ipv6_rpfilter module (RHBZ#1285769)
- Adds log of denied packets option (RHBZ#1322505)

Tue Sep 15 14:00:00 2015 Thomas Woerner - 0.3.9-14
- Fixed file mode of schema configuration file verifier check.sh als in files
(RHBZ#994479)

Fri Sep 11 14:00:00 2015 Thomas Woerner - 0.3.9-13
- Fixed file mode of schema configuration file verifier check.sh (RHBZ#994479)
- Include upstream testsuite in SRPM package (RHBZ#1261502)
- Added missing ports to RH-Satellite-6 mservice (RHBZ#1254531)

Mon Jul 6 14:00:00 2015 Thomas Woerner - 0.3.9-12
- New schema configuration file verifier (RHBZ#994479)
- More information about interface handling with and without NetworkManager
(RHBZ#1122739) (RHBZ#1128563)
- Apply all rich rules for non-default targets (RHBZ#1142741)
- New iscsi service (RHBZ#1150656)
- New rsync service (RHBZ#1150659)
- ipXtables: use -w or -w2 if supported (RHBZ#1161745)
- Do not use ipv6header for protocol matching. (RHBZ#1164605)
- Iptables does not like limit of 1/d (RHBZ#1176813)
- Fix readdition of removed permanent direct settings (RHBZ#1182671)
- Fix bugs found by upstream test suite (RHBZ#1183008)
- Fix polkit auth for query and get passthroughs methods (RHBZ#1183688)
- New vdsm service (RHBZ#1194382)
- New freeipa services (RHBZ#1206490)
- Add missing parts to firewall-offline-cmd man page (RHBZ#1217678)

Tue Jan 13 13:00:00 2015 Thomas Woerner - 0.3.9-11
- added missing upstream commit 265bfe90 for (RHBZ#993650)
- also add log message in the firewall-cmd output (RHBZ#1057095)

Mon Oct 20 14:00:00 2014 Thomas Woerner - 0.3.9-10
- additional upstream commits for (RHBZ#993650)
- additional upstream commits for (RHBZ#1127706)

Tue Oct 7 14:00:00 2014 Thomas Woerner - 0.3.9-9
- added lost runtime passthrough check and reverse patch (RHBZ#993650)

Mon Sep 29 14:00:00 2014 Thomas Woerner - 0.3.9-8
- fixed GUI missing name of active zone (RHBZ#993655)
- recreate man pages at build time (RHBZ#1071303)
- fixes rich language log level (RHBZ#993740)
- fixes typo in firewall-cmd man page (RHBZ#1064401)
- new support to save runtime as permanent (RHBZ#993650)
- new cli --timeout time specifiers support (RHBZ#994044)
- updated translations (RHBZ#1048119) (RHBZ#1083592)
- more descriptive error message in case of mistakes in iptables (RHBZ#1057095)
- use apparent name for default target (RHBZ#1075675)
- simplified firewalld usage on servers by dropping at_console (RHBZ#1097765)
- fixed enable/disable of lockdown (RHBZ#1111573)
- new Satellite 6 service (RHBZ#1135634)
- fixed inconsistent color usage for firewall-cmd messages (RHBZ#1097841)
- fixed missing -Es in lockdown whitelist firewall-config command (RHBZ#1099065)
- unified runtime and permanent D-Bus API (RHBZ#1127706)
- fixed missing update of the connections menu in firewall-config (RHBZ#1120212)
- better docs for interface bindings in firewalld and NetworkManager (RHBZ#1112742)
- firewall-config: Show target REJECT (RHBZ#1058794)
- fixed inconsistent PolicyKit domain usage in main D-Bus interface (RHBZ#1061809)

Fri Feb 28 13:00:00 2014 Jiri Popelka - 0.3.9-7
- firewall-cmd: prevent argparse from parsing iptables options (RHBZ#1070683)

Wed Feb 26 13:00:00 2014 Jiri Popelka - 0.3.9-6
- firewall-offline-cmd: options from \'firewall-cmd --permanent
*\' (RHBZ#1059800)

Sun Feb 23 13:00:00 2014 Thomas Woerner - 0.3.9-5
- fixed rich language log level (RHBZ#993740)
- firewall-config: use simple tool to change zones for connections (RHBZ#993782)
- translations update (RHBZ#1030330)
- firewall-config: fixed service and icmptype name dulications (RHBZ#1067639)
- allow router advertisements for IPv6 rpfilter (RHBZ#1067652)
- firewall-applet: allow to bind connections to the defaut zone (RHBZ#1068148)

Wed Feb 12 13:00:00 2014 Thomas Woerner - 0.3.9-4
- firewall-config creates unloadable config; port forwarding broken
(RHBZ#1057628)
- Network connection is lost after changing Zones Default Target to DROP
(RHBZ#1057629)
- permanently adding rich rule with audit creates unloadable config XML
(RHBZ#1057684)
- firewalld input_zones has default rule for public zone (RHBZ#1058339)
- firewall-cmd is not able to add and remove zones, services and icmptypes
(RHBZ#1064386)
- firewall-config leaves deleted services shown if they were in use
(RHBZ#1058853)
- firewall-cmd does not allow user to change zone default target (RHBZ#1058791)
- firewall-cmd man page has a typo in --help description (RHBZ#1064401)

Fri Jan 17 13:00:00 2014 Thomas Woerner - 0.3.9-3
- fixed enforcing of trusted, drop and block zones (RHBZ#1054415)

Thu Jan 16 13:00:00 2014 Thomas Woerner - 0.3.9-2
- fixed rich rules (RHBZ#1054270)
- fixed small defects in firewall-cmd and firewall-config (RHBZ#1054289)

Wed Jan 15 13:00:00 2014 Thomas Woerner - 0.3.9-1
- rebase to 0.3.9 version:
- translation updates
- New IPv6_rpfilter setting to enable source address validation (RHBZ#847707)
- Do not mix original and customized zones in case of target changes,
apply only used zones
- firewall-cmd: fix --
*_lockdown_whitelist_uid to work with uid 0
- Don\'t show main window maximized. (RHBZ#1046811)
- Use rmmod instead of \'modprobe -r\' (RHBZ#1031102)
- Deprecate \'enabled\' attribute of \'masquerade\' element
- firewall-config: new zone was added twice to the list
- firewalld.dbus(5)
- Enable python shebang fix again
- firewall/client: handle_exceptions: Use loop in decorator
- firewall-offline-cmd: Do not mask firewalld service with disabled option
- firewall-config: richRuleDialogActionRejectType Entry -> ComboBox
- Rich_Rule: fix parsing of reject element (RHBZ#1027373)
- Show combined zones in permanent configuration (RHBZ#1002016)
- firewall-cmd(1): document exit code 2 and colored output (RHBZ#1028507)
- firewall-config: fix RHBZ#1028853

Fri Dec 27 13:00:00 2013 Daniel Mach - 0.3.8-2
- Mass rebuild 2013-12-27

Tue Nov 5 13:00:00 2013 Jiri Popelka - 0.3.8-1
- fix memory leaks
- New option --debug-gc
- Python3 compatibility
- Better non-ascii support
- several firewall-config & firewall-applet fixes
- New --remove-rules commands for firewall-cmd and removeRules methods for D-Bus
- Fixed FirewallDirect.get_rules to return proper list
- Fixed LastUpdatedOrderedDict.keys()
- Enable rich rule usage in trusted zone (RHBZ#994144)
- New error codes: INVALID_CONTEXT, INVALID_COMMAND, INVALID_USER and INVALID_UID

Thu Oct 17 14:00:00 2013 Jiri Popelka - 0.3.7-1
- Don\'t fail on missing ip[6]tables/ebtables table. (RHBZ#967376)
- bash-completion: --permanent --direct options
- firewall/core/fw.py: fix checking for iptables & ip6tables (RHBZ#1017087)
- firewall-cmd: use client\'s exception_handler instead of catching exceptions ourselves
- FirewallClientZoneSettings: fix {add|remove|query}RichRule()
- Extend amanda-client service with 10080/tcp (RHBZ#1016867)
- Simplify Rich_Rule()_lexer() by using functions.splitArgs()
- Fix encoding problems in exception handling (RHBZ#1015941)

Fri Oct 4 14:00:00 2013 Jiri Popelka - 0.3.6.2-1
- firewall-offline-cmd: --forward-port \'toaddr\' is optional (RHBZ#1014958)
- firewall-cmd: fix variable name (RHBZ#1015011)

Thu Oct 3 14:00:00 2013 Jiri Popelka - 0.3.6.1-1
- remove superfluous po files from archive

Wed Oct 2 14:00:00 2013 Jiri Popelka - 0.3.6-1
- firewalld.richlanguage.xml: correct log levels (RHBZ#993740)
- firewall-config: Make sure that all zone settings are updated properly on firewalld restart
- Rich_Limit: Allow long representation for duration (RHBZ#994103
- firewall-config: Show \"Changes applied.\" after changes (RHBZ#993643)
- Use own connection dialog to change zones for NM connections
- Rename service cluster-suite to high-availability (RHBZ#885257)
- Permanent direct support for firewall-config and firewall-cmd
- Try to avoid file descriptor leaking (RHBZ#951900)
- New functions to split and join args properly (honoring quotes)
- firewall-cmd(1): 2 simple examples
- Better IPv6 NAT checking.
- Ship firewalld.direct(5).

Mon Sep 30 14:00:00 2013 Jiri Popelka - 0.3.5-1
- Only use one PK action for configuration (RHBZ#994729)
- firewall-cmd: indicate non-zero exit code with red color
- rich-rule: enable to have log without prefix & log_level & limit
- log-level warn/err -> warning/error (RHBZ#1009436)
- Use policy DROP while reloading, do not reset policy in restart twice
- Add _direct chains to all table and chain combinations
- documentation improvements
- New firewalld.direct(5) man page docbook source
- tests/firewall-cmd_test.sh: make rich language tests work
- Rich_Rule._import_from_string(): improve error messages (RHBZ#994150)
- direct.passthrough wasn\'t always matching out_signature (RHBZ#967800)
- firewall-config: twist ICMP Type IP address family logic.
- firewall-config: port-forwarding/masquerading dialog (RHBZ#993658)
- firewall-offline-cmd: New --remove-service= option (BZ#969106)
- firewall-config: Options->Lockdown was not changing permanent.
- firewall-config: edit line on doubleclick (RHBZ#993572)
- firewall-config: System Default Zone -> Default Zone (RHBZ#993811)
- New direct D-Bus interface, persistent direct rule handling, enabled passthough
- src/firewall-cmd: Fixed help output to use more visual parameters
- src/firewall-cmd: New usage output, no redirection to man page anymore
- src/firewall/core/rich.py: Fixed forwad port destinations
- src/firewall-offline-cmd: Early enable/disable handling now with mask/unmask
- doc/xml/firewalld.zone.xml: Added more information about masquerade use
- Prefix to log message is optional (RHBZ#998079)
- firewall-cmd: fix --permanent --change-interface (RHBZ#997974)
- Sort zones/interfaces/service/icmptypes on output.
- wbem-https service (RHBZ#996668)
- applet&config: add support for KDE NetworkManager connection editor
- firewall/core/fw_config.py: New method update_lockdown_whitelist
- Added missing file watcher for lockdown whitelist in config D-Bus interface
- firewall/core/watcher: New add_watch_file for lockdown-whitelist and direct
- Make use of IPv6 NAT conditional, based on kernel number (RHBZ#967376)

Tue Jul 30 14:00:00 2013 Thomas Woerner 0.3.4-1
- several rich rule check enhancements and fixes
- firewall-cmd: direct options - check ipv4|ipv6|eb (RHBZ#970505)
- firewall-cmd(1): improve description of direct options (RHBZ#970509)
- several firewall-applet enhancements and fixes
- New README
- several doc and man page fixes
- Service definitions for PCP daemons (RHBZ#972262)
- bash-completion: add lockdown and rich language options
- firewall-cmd: add --permanent --list-all[-zones]
- firewall-cmd: new -q/--quiet option
- firewall-cmd: warn when default zone not active (RHBZ#971843)
- firewall-cmd: check priority in --add-rule (RHBZ#914955)
- add dhcpv6 (for server) service (RHBZ#917866)
- firewall-cmd: add --permanent --get-zone-of-interface/source --change-interface/source
- firewall-cmd: print result (yes/no) of all --query-
* commands
- move permanent-getZoneOf{Interface|Source} from firewall-cmd to server
- Check Interfaces/sources when updating permanent zone settings.
- FirewallDConfig: getZoneOfInterface/Source can actually return more zones
- Fixed toaddr check in forward port to only allow single address, no range
- firewall-cmd: various output improvements
- fw_zone: use check_single_address from firewall.functions
- getZoneOfInterface/Source does not need to throw exception
- firewall.functions: Use socket.inet_pton in checkIP, fixed checkIP
*nMask
- firewall.core.io.service: Properly check port/proto and destination address
- Install applet desktop file into /etc/xdg/autostart
- Fixed option problem with rich rule destinations (RHBZ#979804)
- Better exception creation in dbus_handle_exceptions() decorator (RHBZ#979790)
- Updated firewall-offline-cmd
- Use priority in add, remove, query and list of direct rules (RHBZ#979509)
- New documentation (man pages are created from docbook sources)
- firewall/core/io/direct.py: use prirority for rule methods, new get_all_ methods
- direct: pass priority also to client.py and firewall-cmd
- applet: New blink and blink-count settings
- firewall.functions: New function ppid_of_pid
- applet: Check for gnome3 and fix it, use new settings, new size-changed cb
- firewall-offline-cmd: Fix use of systemctl in chroot
- firewall-config: use string.ascii_letters instead of string.letters
- dbus_to_python(): handle non-ascii chars in dbus.String.
- Modernize old syntax constructions.
- dict.keys() in Python 3 returns a \"view\" instead of list
- Use gettext.install() to install _() in builtins namespace.
- Allow non-ascii chars in \'short\' and \'description\'
- README: More information for \"Working With The Source Repository\"
- Build environment fixes
- firewalld.spec: Added missing checks for rhel > 6 for pygobject3-base
- firewall-applet: New setting show-inactive
- Don\'t stop on reload when lockdown already enabled (RHBZ#987403)
- firewall-cmd: --lockdown-on/off did not touch firewalld.conf
- FirewallApplet.gschema.xml: Dropped unused sender-info setting
- doc/firewall-applet.xml: Added information about gsettings
- several debug and log message fixes
- Add chain for sources so they can be checked before interfaces (RHBZ#903222)
- Add dhcp and proxy-dhcp services (RHBZ#986947)
- io/Zone(): don\'t error on deprecated family attr of source elem
- Limit length of zone file name (to 12 chars) due to Netfilter internals.
- It was not possible to overload a zone with defined source(s).
- DEFAULT_ZONE_TARGET: {chain}_ZONE_{zone} -> {chain}_{zone}
- New runtime getSettings for services and icmptypes, fixed policies callbacks
- functions: New functions checkUser, checkUid and checkCommand
- src/firewall/client: Fixed lockdown-whitelist-updated signal handling
- firewall-cmd(1): move firewalld.richlanguage(5) reference in --
*-rich-rule
- Rich rule service: Only add modules for accept action
- firewall/core/rich: Several fixes and enhanced checks
- Fixed reload of direct rules
- firewall/client: New functions to set and get the exception handler
- firewall-config: New and enhanced UI to handle lockdown and rich rules
- zone\'s immutable attribute is redundant
- Do not allow to set settings in config for immutable zones.
- Ignore deprecated \'immutable\' attribute in zone files.
- Eviscerate \'immutable\' completely.
- FirewallDirect.query_rule(): fix it
- permanent direct: activate firewall.core.io.direct:Direct reader
- core/io/
*: simplify getting of character data
- FirewallDirect.set_config(): allow reloading

Thu Jun 20 14:00:00 2013 Jiri Popelka
- Remove migrating to a systemd unit file from a SysV initscript
- Remove pointless \"ExclusiveOS\" tag

Fri Jun 7 14:00:00 2013 Thomas Woerner 0.3.3-2
- Fixed rich rule check for use in D-Bus

Thu Jun 6 14:00:00 2013 Thomas Woerner 0.3.3-1
- new service files
- relicensed logger.py under GPLv2+
- firewall-config: sometimes we don\'t want to use client\'s exception handler
- When removing Service/IcmpType remove it from zones too (RHBZ#958401)
- firewall-config: work-around masquerade_check_cb() being called more times
- Zone(IO): add interfaces/sources to D-Bus signature
- Added missing UNKNOWN_SOURCE error code
- fw_zone.check_source: Raise INVALID_FAMILY if family is invalid
- New changeZoneOfInterface method, marked changeZone as deprecated
- Fixed firewall-cmd man page entry for --panic-on
- firewall-applet: Fixed possible problems of unescaped strings used for markup
- New support to bind zones to source addresses and ranges (D-BUS, cmd, applet
- Cleanup of unused variables in FirewallD.start
- New firewall/fw_types.py with LastUpdatedOrderedDict
- direct.chains, direct.rules: Using LastUpdatedOrderedDict
- Support splitted zone files
- New reader and writer for stored direct chains and rules
- LockdownWhitelist: fix write(), add get_commands/uids/users/contexts()
- fix service_writer() and icmptype_writer() to put newline at end of file
- firewall-cmd: fix --list-sources
- No need to specify whether source address family is IPv4 or IPv6
- add getZoneOfSource() to D-Bus interface
- Add tests and bash-completion for the new \"source\" operations
- Convert all input args in D-Bus methods
- setDefaultZone() was calling accessCheck()
*after
* the action
- New uniqify() function to remove duplicates from list whilst preserving order
- Zone.combine() merge also services and ports
- config/applet: silence DBusException during start when FirewallD is not running (RHBZ#966518)
- firewall-applet: more fixes to make the address sources family agnostic
- Better defaults for lockdown white list
- Use auth_admin_keep for allow_any and allow_inactive also
- New D-Bus API for lockdown policies
- Use IPv4, IPv6 and BRIDGE for FirewallD properties
- Use rich rule action as audit type
- Prototype of string-only D-Bus interface for rich language
- Fixed wrongly merged source family check in firewall/core/io/zone.py
- handle_cmr: report errors, cleanup modules in error case only, mark handling
- Use audit type from rule action, fixed rule output
- Fixed lockdown whitelist D-Bus handling method names
- New rich rule handling in runtime D-Bus interface
- Added interface, source and rich rule handling (runtime and permanent)
- Fixed dbus_obj in FirewallClientConfigPolicies, added queryLockdown
- Write changes in setLockdownWhitelist
- Fixed typo in policies log message in method calls
- firewall-cmd: Added rich rule, lockdown and lockdown whitelist handling
- Don\'t check access in query/getLockdownWhitelist
*()
- firewall-cmd: Also output masquerade flag in --list-all
- firewall-cmd: argparse is able to convert argument to desired type itself
- firewall-cmd_test.sh: tests for permanent interfaces/sources and lockdown whitelist
- Makefile.am: add missing files
- firewall-cmd_test.sh: tests for rich rules
- Added lockdown, source, interface and rich rule docs to firewall-cmd
- Do not masquerade lo if masquerade is enabled in the default zone (RHBZ#904098)
- Use in metavar for firewall-cmd parser

Fri May 10 14:00:00 2013 Jiri Popelka - 0.3.2-2
- removed unintentional en_US.po from tarball

Tue Apr 30 14:00:00 2013 Jiri Popelka - 0.3.2-1
- Fix signal handling for SIGTERM
- Additional service files (RHBZ#914859)
- Updated po files
- s/persistent/permanent/ (Trac Ticket #7)
- Better behaviour when running without valid DISPLAY (RHBZ#955414)
- client.handle_exceptions(): do not loop forever
- Set Zone.defaults in zone_reader (RHBZ#951747)
- client: do not pass the dbus exception name to handler
- IO_Object_XMLGenerator: make it work with Python 2.7.4 (RHBZ#951741)
- firewall-cmd: do not use deprecated BaseException.message
- client.py: fix handle_exceptions() (RHBZ#951314)
- firewall-config: check zone/service/icmptype name (RHBZ#947820)
- Allow 3121/tcp (pacemaker_remote) in cluster-suite service. (RHBZ#885257)
- firewall-applet: fix default zone hangling in \'shields-up\' (RHBZ#947230)
- FirewallError.get_code(): check for unknown error

Wed Apr 17 14:00:00 2013 Jiri Popelka - 0.3.1-2
- Make permanenent changes work with Python 2.7.4 (RHBZ#951741)

Thu Mar 28 13:00:00 2013 Thomas Woerner 0.3.1-1
- Use explicit file lists for make dist
- New rich rule validation check code
- New global check_port and check_address functions
- Allow source white and black listing with the rich rule
- Fix error handling in case of unsupported family in rich rule
- Enable ip_forwarding in masquerade and forward-port
- New functions to read and write simple files using filename and content
- Add --enable-sysconfig to install Fedora-specific sysconfig config file.
- Add chains for security table (RHBZ#927015)
- firewalld.spec: no need to specify --with-systemd-unitdir
- firewalld.service: remove syslog.target and dbus.target
- firewalld.service: replace hard-coded paths
- Move bash-completion to new location.
- Revert \"Added configure for new build env\"
- Revert \"Added Makefile.in files\"
- Revert \"Added po/Makefile.in.in\"
- Revert \"Added po/LINGUAS\"
- Revert \"Added aclocal.m4\"
- Amend zone XML Schema

Wed Mar 20 13:00:00 2013 Thomas Woerner 0.3.0-1
- Added rich language support
- Added lockdown feature
- Allow to bind interfaces and sources to zones permanently
- Enabled IPv6 NAT support
masquerading and port/packet forwarding for IPv6 only with rich language
- Handle polkit errors in client class and firewall-config
- Added priority description for --direct --add-rule in firewall-cmd man page
- Add XML Schemas for zones/services/icmptypes XMLs
- Don\'t keep file descriptors open when forking
- Introduce --nopid option for firewalld
- New FORWARD_IN_ZONES and FORWARD_OUT_ZONES chains (RHBZ#912782)
- Update cluster-suite service (RHBZ#885257)
- firewall-cmd: rename --enable/disable-panic to --panic-on/off (RHBZ#874912)
- Fix interaction problem of changed event of gtk combobox with polkit-kde
by processing all remaining events (RHBZ#915892)
- Stop default zone rules being applied to all zones (RHBZ#912782)
- Firewall.start(): don\'t call set_default_zone()
- Add wiki\'s URL to firewalld(1) and firewall-cmd(1) man pages
- firewalld-cmd: make --state verbose (RHBZ#886484)
- improve firewalld --help (RHBZ#910492)
- firewall-cmd: --add/remove-
* can be used multiple times (RHBZ#879834)
- Continue loading zone in case of wrong service/port etc. (RHBZ#909466)
- Check also services and icmptypes in Zone() (RHBZ#909466)
- Increase the maximum length of the port forwarding fields from 5 to 11 in
firewall-config
- firewall-cmd: add usage to fail message
- firewall-cmd: redefine usage to point to man page
- firewall-cmd: fix visible problems with arg. parsing
- Use argparse module for parsing command line options and arguments
- firewall-cmd.1: better clarify where to find ACTIONs
- firewall-cmd Bash completion
- firewall-cmd.1: comment --zone= usage and move some options
- Use zone\'s target only in %s_ZONES chains
- default zone in firewalld.conf was set to public with every restart (#902845)
- man page cleanup
- code cleanup

Thu Mar 7 13:00:00 2013 Jiri Popelka - 0.2.12-5
- Another fix for RHBZ#912782

Wed Feb 20 13:00:00 2013 Jiri Popelka - 0.2.12-4
- Stop default zone rules being applied to all zones (RHBZ#912782)

Wed Feb 13 13:00:00 2013 Fedora Release Engineering - 0.2.12-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild

Tue Jan 22 13:00:00 2013 Jiri Popelka - 0.2.12-2
- Default zone in firewalld.conf was reseted with every restart (RHBZ#902845)
- Add icon cache related scriptlets for firewall-config (RHBZ#902680)
- Fix typo in firewall-config (RHBZ#895812)
- Fix few mistakes in firewall-cmd(1) man page

Mon Jan 14 13:00:00 2013 Thomas Woerner 0.2.12-1
- firewall-cmd: use -V instead of -v for version info (RHBZ#886477)
- firewall-cmd: don\'t check reload()\'s return value (RHBZ#886461)
- actually install firewalld.zones.5
- firewall-config: treat exceptions when adding new zone/service/icmp
(RHBZ#886602)
- firewalld.spec: Fixed requirements of firewall-config to use gtk2 and
pygobject3
- Fail gracefully when running in non X environment.(RHBZ#886551)
- offline-cmd: fail gracefully when no s-c-f config
- fix duplicated iptables rules (RHBZ#886515)
- detect errors and duplicates in config file (RHBZ#886581)
- firewall-config: don\'t make \'Edit Service\' and \'Edit ICMP Type\' insensitive
- firewalld.spec: fixed requirements, require pygobject3-base
- frewall-applet: Unused code cleanup
- firewall-applet: several usability fixes and enhancements
(RHBZ#886531) (RHBZ#886534)
- firewall/server/server.py: fixed KeyboardInterrupt message (RHBZ#886558)
- Moved fallback zone and minimal_mark to firewall.config.__init__
- Do not raise ZONE_ALREADY_SET in change_zone if old zone is set again
(RHBZ#886432)
- Make default zone default for all unset connections/interfaces
(RHBZ#888288) (RHBZ#882736)
- firewall-config: Use Gtk.MessageType.WARNING for warning dialog
- firewall-config: Handle unknown services and icmptypes in persistent mode
- firewall-config: Do not load settings more than once
- firewall-config: UI cleanup and fixes (RHBZ#888242)
- firewall-cmd: created alias --change-zone for --change-interface
- firewall-cmd man page updates (RHBZ#806511)
- Merged branch \'build-cleanups\'
- dropped call to autogen.sh in build stage, not needed anymore due to
\'build-cleanups\' merge

Thu Dec 13 13:00:00 2012 Thomas Woerner 0.2.11-2
- require pygobject3-base instead of pygobject3 (no cairo needed) (RHBZ#874378)
- fixed dependencies of firewall-config to use gtk3 with pygobject3-base and
not pygtk2

Tue Dec 11 13:00:00 2012 Thomas Woerner 0.2.11-1
- Fixed more _xmlplus (PyXML) incompatibilities to python xml
- Several man page updates
- Fixed error in addForwardPort, removeForwardPort and queryForwardPort
- firewall-cmd: use already existing queryForwardPort()
- Update firewall.cmd man page, use man page as firewall-cmd usage (rhbz#876394)
- firewall-config: Do not force to show labels in the main toolbar
- firewall-config: Dropped \"Change default zone\" from toolbar
- firewall-config: Added menu entry to change zones of connections
- firewall-applet: Zones can be changed now using nm-connection-editor
(rhbz#876661)
- translation updates: cs, hu, ja

Tue Nov 20 13:00:00 2012 Thomas Woerner 0.2.10-1
- tests/firewalld_config.py: tests for config.service and config.icmptype
- FirewallClientConfigServiceSettings(): destinations are dict not list
- service/zone/icmptype: do not write deprecated name attribute
- New service ntp
- firewall-config: Fixed name of about dialog
- configure.in: Fixed getting of error codes
- Added coding to all pyhton files
- Fixed copyright years
- Beautified file headers
- Force use of pygobject3 in python-slip (RHBZ#874378)
- Log: firewall.server.config_icmptype, firewall.server.config_service and
firewall.server.config_zone: Prepend full path
- Allow \":\" in interface names for interface aliases
- Add name argument to Updated and Renamed signal
- Disable IPv4, IPv6 and EB tables if missing - for IPv4/IPv6 only environments
- firewall-config.glade file cleanup
- firewall-config: loadDefaults() can throw exception
- Use toolbars for Add/Edit/Remove/LoadDefaults buttons for zones, services
and icmp types
- New vnc-server service, opens ports for displays :0 to :3 (RHBZ#877035)
- firewall-cmd: Fix typo in help output, allow default zone usage for
permanenent options
- Translation updates: cs, fr, ja, pt_BR and zh_CN

Wed Oct 17 14:00:00 2012 Thomas Woerner 0.2.9-1
- firewall-config: some UI usability changes
- firewall-cmd: New option --list-all-zones, output of --list-all changed,
more option combination checks
- firewall-applet: Replaced NMClient by direct DBUS calls to fix python core
dumps in case of connection activates/deactivates
- Use fallback \'C\' locale if current locale isn\'t supported (RHBZ#860278)
- Add interfaces to zones again after reload
- firewall-cmd: use FirewallClient().connected value
- firewall-cmd: --remove-interface was not working due to a typo
- Do not use restorecon for new and backup files
- Fixed use of properties REJECT and DROP
- firewalld_test.py: check interfaces after reload
- Translation updates
- Renamed firewall-convert-scfw-config to firewall-offline-cmd, used by
anaconda for firewall configuration (e.g. kickstart)
- Fix python shebang to use -Es at installation time for bin_SCRIPTS and
sbin_SCRIPTS and at all times in gtk3_chooserbutton.py
- tests/firewalld_config.py: update test_zones() test case
- Config interface: improve renaming of zones/services/icmp_types
- Move emiting of Added signals closer to source.
- FirewallClient(): config:ServiceAdded signal was wrongly mapped
- Add argument \'name\' to Removed signal
- firewall-config: Add callbacks for config:[service|icmp]-[added|removed]
- firewall-config: catch INVALID_X error when removing zone/service/icmp_type
- firewall-config: remove unused code
- Revert \"Neutralize _xmlplus instead of conforming it\"
- firewall-applet: some UI usability changes
- firewall-cmd: ALREADY_ENABLED, NOT_ENABLED, ZONE_ALREADY_SET are warnings

Fri Sep 7 14:00:00 2012 Thomas Woerner 0.2.8-1
- Do not apply old settings to zones after reload
- FirewallClient: Added callback structure for firewalld signals
- New firewall-config with full zone, service and icmptype support
- Added Shields Up/Down configuration dialog to firewall-applet
- Name attribute of main tag deprecated for zones, services and icmptypes,
will be ignored if present
- Fixed wrong references in firewalld man page
- Unregister DBus interfaces after sending out the Removed signal
- Use proper DBus signature in addIcmpType, addService and addZone
- New builtin property for config interfaces
- New test case for Config interface
- spec: use new systemd-rpm macros (rhbz#850110)
- More config file verifications
- Lots of smaller fixes and enhancements

Tue Aug 21 14:00:00 2012 Jiri Popelka 0.2.7-2
- use new systemd-rpm macros (rhbz#850110)

Mon Aug 13 14:00:00 2012 Thomas Woerner 0.2.7-1
- Update of firewall-config
- Some bug fixes

Tue Aug 7 14:00:00 2012 Thomas Woerner 0.2.6-1
- New D-BUS interface for persistent configuration
- Aded support for persistent zone configuration in firewall-cmd
- New Shields Up feature in firewall-applet
- New requirements for python-decorator and pygobject3
- New firewall-config sub-package
- New firewall-convert-scfw-config config script

Fri Apr 20 14:00:00 2012 Thomas Woerner 0.2.5-1
- Fixed traceback in firewall-cmd for failed or canceled authorization,
return proper error codes, new error codes NOT_RUNNING and NOT_AUTHORIZED
- Enhanced firewalld service file (RHBZ#806868) and (RHBZ#811240)
- Fixed duplicates in zone after reload, enabled timed settings after reload
- Removed conntrack --ctstate INVALID check from default ruleset, because it
results in ICMP problems (RHBZ#806017).
- Update interfaces in default zone after reload (rhbz#804814)
- New man pages for firewalld(1), firewalld.conf(5), firewalld.icmptype(5),
firewalld.service(5) and firewalld.zone(5), updated firewall-cmd man page
(RHBZ#811257)
- Fixed firewall-cmd help output
- Fixed missing icon for firewall-applet (RHBZ#808759)
- Added root user check for firewalld (RHBZ#767654)
- Fixed requirements of firewall-applet sub package (RHBZ#808746)
- Update interfaces in default zone after changing of default zone (RHBZ#804814)
- Start firewalld before NetworkManager (RHBZ#811240)
- Add Type=dbus and BusName to service file (RHBZ#811240)

Fri Mar 16 13:00:00 2012 Thomas Woerner 0.2.4-1
- fixed firewalld.conf save exception if no temporary file can be written to
/etc/firewalld/

Thu Mar 15 13:00:00 2012 Thomas Woerner 0.2.3-1
- firewall-cmd: several changes and fixes
- code cleanup
- fixed icmp protocol used for ipv6 (rhbz#801182)
- added and fixed some comments
- properly restore zone settings, timeout is always set, check for 0
- some FirewallError exceptions were actually not raised
- do not REJECT in each zone
- removeInterface() don\'t require zone
- new tests in firewall-test script
- dbus_to_python() was ignoring certain values
- added functions for the direct interface: chains, rules, passthrough
- fixed inconsistent data after reload
- some fixes for the direct interface: priority positions are bound to ipv,
table and chain
- added support for direct interface in firewall-cmd:
- added isImmutable(zone) to zone D-Bus interface
- renamed policy file
- enhancements for error messages, enables output for direct.passthrough
- added allow_any to firewald policies, using at leas auth_admin for policies
- replaced ENABLE_FAILED, DISABLE_FAILED, ADD_FAILED and REMOVE_FAILED by
COMMAND_FAILED, resorted error codes
- new firewalld configuration setting CleanupOnExit
- enabled polkit again, found a fix for property problem with slip.dbus.service
- added dhcpv6-client to \'public\' (the default) and to \'internal\' zones.
- fixed missing settings form zone config files in
\"firewall-cmd --list=all --zone=\" call
- added list functions for services and icmptypes, added --list=services and
--list=icmptypes to firewall-cmd

Tue Mar 6 13:00:00 2012 Thomas Woerner 0.2.2-1
- enabled dhcpv6-client service for zones home and work
- new dhcpv6-client service
- firewall-cmd: query mode returns reversed values
- new zone.changeZone(zone, interface)
- moved zones, services and icmptypes to /usr/lib/firewalld, can be overloaded
by files in /etc/firewalld (no overload of immutable zones block, drop,
trusted)
- reset MinimalMark in firewalld.cnf to default value
- fixed service destination (addresses not used)
- fix xmlplus to be compatible with the python xml sax parser and python 3
by adding __contains__ to xml.sax.xmlreader.AttributesImpl
- use icon and glib related post, postun and posttrans scriptes for firewall
- firewall-cmd: fix typo in state
- firewall-cmd: fix usage()
- firewall-cmd: fix interface action description in usage()
- client.py: fix definition of queryInterface()
- client.py: fix typo in getInterfaces()
- firewalld.service: do not fork
- firewall-cmd: fix bug in --list=port and --port action help message
- firewall-cmd: fix bug in --list=service

Mon Mar 5 13:00:00 2012 Thomas Woerner
- moved zones, services and icmptypes to /usr/lib/firewalld, can be overloaded
by files in /etc/firewalld (no overload of immutable zones block, drop,
trusted)

Tue Feb 21 13:00:00 2012 Thomas Woerner 0.2.1-1
- added missing firewall.dbus_utils

Tue Feb 7 13:00:00 2012 Thomas Woerner 0.2.0-2
- added glib2-devel to build requires, needed for gsettings.m4
- added --with-system-unitdir arg to fix installaiton of system file
- added glib-compile-schemas calls for postun and posttrans
- added EXTRA_DIST file lists

Mon Feb 6 13:00:00 2012 Thomas Woerner 0.2.0-1
- version 0.2.0 with new FirewallD1 D-BUS interface
- supports zones with a default zone
- new direct interface as a replacement of the partial virt interface with
additional passthrough functionality
- dropped custom rules, use direct interface instead
- dropped trusted interface funcionality, use trusted zone instead
- using zone, service and icmptype configuration files
- not using any system-config-firewall parts anymore

Mon Feb 14 13:00:00 2011 Thomas Woerner 0.1.3-1
- new version 0.1.3
- restore all firewall features for reload: panic and virt rules and chains
- string fixes for firewall-cmd man page (by Jiri Popelka)
- fixed firewall-cmd port list (by Jiri Popelka)
- added firewall dbus client connect check to firewall-cmd (by Jiri Popelka)
- translation updates: de, es, gu, it, ja, kn, ml, nl, or, pa, pl, ru, ta,
uk, zh_CN

Mon Jan 3 13:00:00 2011 Thomas Woerner 0.1.2-1
- fixed package according to package review (rhbz#665395):
- non executable scripts: dropped shebang
- using newer GPL license file
- made /etc/dbus-1/system.d/FirewallD.conf config(noreplace)
- added requires(post) and (pre) for chkconfig

Mon Jan 3 13:00:00 2011 Thomas Woerner 0.1.1-1
- new version 0.1.1
- fixed source path in POTFILES
*
- added missing firewall_config.py.in
- added misssing space for spec_ver line
- using firewall_config.VARLOGFILE
- added date to logging output
- also log fatal and error logs to stderr and firewall_config.VARLOGFILE
- make log message for active_firewalld fatal

Mon Dec 20 13:00:00 2010 Thomas Woerner 0.1-1
- initial package (proof of concept implementation)