Changelog for dd_rescue-1.98-1.el5.x86_64.rpm :
Sun May 31 00:00:00 2015 Lawrence R. Rogers - 1.98-1

* Release 1.98-1
It has a few improvements such as a few cleanups, a fault injection framework for
testing and significantly improved speed of the pseudo RNG. But the important feature
is the addtion of a crypt plugin. You can insert it into the plugin chain to de/encrypt
data using the AES family of algorithms. (More are planned for the future.) You can use
128/192/256 bit keys and optionally use a higher number of rounds to have an increased
security margin. Keys (and IVs) can be generated, saved, retrieved or generated from
password and salt. Please be aware that despite diligent testing this is a new plugin --
so be prepared that there will be some changes and bugfixes to it in the near future.

Sun Aug 10 00:00:00 2014 Lawrence R. Rogers - 1.46-1

* Release 1.46-1
ddr_hash now supports calculating HMACS instead of plain hashes. The hash calculation
has been cleaned up a bit. When a seed val of 0 is passed on the command line, additional
randomness is created using the rdrand() command on x86/x86-64 (if available).

(2014-06-27) A vulnerability in most implementations of lzo decompression has been
reported. The liblzo2 library (up to and including v 2.06) used by the ddr_lzo plugin
(until dd_rescue-1.45) is affected. You need i to feed specially crafted compressed
data in blocks of 16MB or larger to the decompressor on 32bit platforms to exploit it,
see the report for more details. (This issue has ID LMS-20140616-1/ CVE-2014-4607.)
The man page ddr_lzo advises to be careful when feeding data from untrusted sources
to the decompressor; it seems that this advice has been wise. Fortunately, ddr_lzo
does not normally feed such large blocks to the decompressor; you\'d need to manually
increase the soft block size to at least 8MB and ignore a warning to trigger this issue
with dd_rescue. But it is possible. So here\'s my advice:

Update liblzo2 to 2.07 (or a fixed 2.06 version) which has this issue fixed (your Linux
distributor should provide this very soon). This is enough to fix the issue, as the
ddr_lzo plugin of dd_rescue does dynamically link against liblzo2, except for Android.
If using my provided Android binaries, redownload and reinstall the libddr_lzo.so binary
(now with version number 1.45a), which has been compiled against liblzo2.a v 2.07 or
better use the binaries from 1.46. Be careful with media consumption -- ffmpeg/mplayer
seems to be badly affected by this issue, even on 64bit platforms.

Wed May 28 00:00:00 2014 Lawrence R. Rogers - 1.45-1

* Release 1.45-1
ddr_hash received a bugfix (sha512/sha384 could overflow a buffer).
It gained support for sha1 hash.
ddr_hash can now conveniently retrieve (and check) and store hashes in xattrs and md5sum/sha256sum/... style files.
A new null plugin (ddr_null) was added.

Sat May 24 00:00:00 2014 Lawrence R. Rogers - 1.44-1

* Release 1.44-1
The plugin libddr_MD5.so (short ddr_MD5) has been renamed to ddr_hash, reflecting that we also support sha1, sha256,
sha224, sha512, sha384 now. Checks have been added to the test suite and the documentation been updated accordingly.

Wed May 21 00:00:00 2014 Lawrence R. Rogers - 1.43-1

* Release 1.43-1
The main feature of 1.43 is the new lzo plugin. It de/compresses data
using the lzo algorithms, which are very fast to decompress and most
versions are also fast to compress (at somewhat moderate compression
levels). The plugin supports many of dd_rescue\'s features, such
as skipping bad blocks (encoding sparseness/holes into the output)
as well as appending. It also continues on errors (skipping a whole
block if nodiscard is NOT given) and allows to search for valid lzo
block headers if sync is lost. fuzz testing has been done to support
reliability. A man page ddr_lzo(1) has been created.

The plugin interface has been enhanced to support ddr_lzo; the MD5 plugin
has also seen some work beyond just refactoring: It supports the parameter
output/outfd= now and supports all type of holes that can be generated in
a chain with ddr_lzo now.

Some minor improvements (docu, messages) and bug fixes have been
applied. There also is a new ARMv8 (AArch64 aka ARM64) optimized
routine to detect zero-blocks.

Thu Mar 6 23:00:00 2014 Lawrence R. Rogers - 1.42.1-1

* Release 1.42.1-1
1.42.1 contains a fix for a sublety how we set up a handler for
SIGILL and return with longjmp to detect the supported instruction
sets of the CPU -- we need to manually reset the process\' signal mask,
otherwise a second failed probe would abort.

Mon Mar 3 23:00:00 2014 Lawrence R. Rogers - 1.42-1

* Release 1.42-1
1.42 brings the possibility to load plugins to analyze or transform data
before it\'s written to the output file(s). A plugin to calculate the MD5
hash is provided. posix_fadvise() is used if available (optimization) and
dd_rescue now only provides a short usage info rather than the long help
text on wrong parameters.

Tue Feb 25 23:00:00 2014 Lawrence R. Rogers - 1.41-1

* Release 1.41-1
There has been a lot of internal refactoring that improves the detection of CPU
features (at runtime) and libc/compiler features (at build time). One result is
that this version supports building against the Android NDK. (armv7l binaries
built against Android API 17 (aka 4.2) libc can be found below in the download
section.) Another consequence is that AVX2 support is now enabled (for saving
CPU cycles on sparse block detection). A few minor bugs have been addressed
(the most serious one a harmless off-by-one on determining the size of a
block device). Number formatting is more consistent now. There also a new
option -u/--rmvtrim that deletes the created file again and issues a fstrim
on the filesystem -- good if you filled the empty space of a filesystem with
zeros for data protection and SSD refreshment.

Sat Feb 15 23:00:00 2014 Lawrence R. Rogers - 1.40.1-1

* Release 1.40.1-1
It just has one patch to fix the SSE2 detection on i386 -- the old code would end in an endless loop ...

Fri Aug 9 00:00:00 2013 Lawrence R. Rogers - 1.40-1

* Release 1.40-1
It brings copying of extended attributes (with -p/--preserve). It doubles the default soft
block size for buffered IO, but brings sparse write optimization for half-empty blocks.
It also optimizes copying by using the first write to get rid off odd file offsets. It
also adds a lot more test cases to make check.

Fri Aug 9 00:00:00 2013 Lawrence R. Rogers - 1.39-1

* Release 1.39-1
It fixes an issue where a copied file could be appended zeros if hardblocksize copy was used
(e.g. b/c hardbs==softbs, bnc #833765). There\'s also a bit better ARM asm optimization,
yielding a ~15% performance increase. There\'s also a help/manpage clarification that
syncfreq actually is a size. And we use autoconf now to determine the target system
features. Default build target now uses libdl.

Sat Aug 3 00:00:00 2013 Lawrence R. Rogers - 1.38-1

* Release 1.38-1
Improving SSE sparse detection performance (by 40%), adding a testcase for the 1.35/1.36
bug and run it in make check. There\'s even an AVX version, but it\'s not enabled by
default, as it\'s untested. --force/-f now allows to ignore a non-zero output position
on non-seekable output and the curr.rate and ETA calculations have improved a bit.

Fri Aug 2 00:00:00 2013 Lawrence R. Rogers - 1.37-1

* Release 1.37-1
Fixing an issue with SSE2 sparse detection, which could spuriously detect zero-filled
blocks and thus result in corrupted copies if option -a was used. (This would happen for
blocks that had no bytes with the uppermost bit set, such as e.g. ASCII text.) Embarassing!
Also fixed issues on big-endian machines (although these were inconsequential for dd_rescue).

Thu Jul 25 00:00:00 2013 Lawrence R. Rogers - 1.36-1

* Release 1.36-1
It fixes an overflow issue with the number output for long running
dd_rescue processes. SSE2 is now also enabled in x86 (32bit, with runtime detection) and
an optimized ARM version (assembler yeah!) to find zero blocks was added.

Thu Jul 18 00:00:00 2013 Lawrence R. Rogers - 1.35-1

* Release 1.35-1
It had some improvements on the output that it prints -- beyond internal improvements it introduces
colours to the output unless the terminal type is clearly dumb; there is also an option to control this.
Numbers are highlighted for readability. Output is rate limited (10/s). 1.35 also brings a simple
rewrite logic for handling write errors. There\'s an SSE2 optimized version to find
zero blocks for sparse writing.

Fri Jul 5 00:00:00 2013 Lawrence R. Rogers - 1.34-1

* Release 1.34-1
This version provides better support for various
*nix systems (specifically had a few fixes for FreeBSD),
better compatibility with compilers (clang and g++ and clang++). It can now also load libfallocate at runtime (libdl)
and detects a few more fatl write errors as such.

Wed Apr 3 00:00:00 2013 Lawrence R. Rogers - 1.33-1

* Release 1.33-1
This version brings long options, a new double overwrite mode (-2) and a man page.

Sun Feb 10 23:00:00 2013 Lawrence R. Rogers - 1.32-1

* Release 1.32-1
This version has a new option -x to append to the output file and you can specify -Y (multiple times if you wish so) to write the same data
to secondary output files.

Sun Feb 3 23:00:00 2013 Lawrence R. Rogers - 1.31-1

* Release 1.31-1
This version brings a few tiny improvements in the output (such as displaying the total elapsed time in the summary as opposed to ETA of 0,
and the amount of data really written with option -W). But importantly, it has the new mode of triple overwriting of data (options -3 and -4),
with random numbers, inverse random numbers, new random numbers (only for -4) and zeros, this way allowing paranoia-safe deletion of information.

Fri Jan 25 23:00:00 2013 Lawrence R. Rogers - 1.30-1

* Release 1.30-1
Version 1.30 (2013-01-25) brought a fix for outputting data to stdout and a fix for a possible double free operation (introduced in 1.29).
The message formatting has been streamlined a bit. The PRNG can now be initialized from a file (e.g. -Z /dev/urandom).
The program now can also avoid writing to a target block if the target block already has the same data (option -W).
Think of SSDs or other devices where you want to avoid writes.

Tue Jan 22 23:00:00 2013 Lawrence R. Rogers - 1.29-1

* Release 1.29-1
In Version 1.29 (2013-01-22) a bug was fixed, where the last bytes where not copied corrected if hardbs == softbs. 1.29 also brings a number
of new features; the ability to write the same (softbs sized) block again and again (option -R, automatically set if infile is /dev/zero),
the ability to limit transfer size such that the outfile won\'t be enlarged (-M) and the possibility to use userspace random numbers (libc/frandom)
to fill files with random data (options -z and -Z). Last not least, OBS also builds .deb binaries for Ubu12.04 / Deb6 now.

Mon May 21 00:00:00 2012 Hans Ulrich Niedermann - 1.28-1
- Use mktemp based BuildRoot
- Ship file FAQ.dd_rhelp
- Update to dd_rescue-1.28 and dd_rhelp-0.3.0

Fri Jan 13 23:00:00 2012 Fedora Release Engineering - 1.23-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild

Tue Feb 8 23:00:00 2011 Fedora Release Engineering - 1.23-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

Thu Nov 18 23:00:00 2010 Jussi Lehtola - 1.23-1
- Update to 1.23.

Thu Nov 18 23:00:00 2010 Jussi Lehtola - 1.22-1
- Update to 1.22.

Sat Jul 25 00:00:00 2009 Fedora Release Engineering - 1.14-10
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

Tue Feb 24 23:00:00 2009 Fedora Release Engineering - 1.14-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

Thu Jul 17 00:00:00 2008 Tom \"spot\" Callaway - 1.14-8
- fix license tag

Mon Feb 25 23:00:00 2008 Andreas Thienemann - 1.14-7
- Remove the obsoletes flag as we\'re shipping ddrescue in parallel.

Mon Feb 11 23:00:00 2008 Andreas Thienemann - 1.14-6
- Updated to dd_rescue 1.14 and dd_rhelp 0.1.2

Wed Mar 7 23:00:00 2007 Andreas Thienemann - 1.12-6
- Fixed the patch from 1.12-5

Wed Mar 7 23:00:00 2007 Andreas Thienemann - 1.12-5
- Fixed tail warning about deprecated argument. Thanks to Jason Farrell
for the patch.

Fri Nov 10 23:00:00 2006 Andreas Thienemann - 1.12-4
- Added dist-tag

Fri Nov 10 23:00:00 2006 Andreas Thienemann - 1.12-3
-
*bump
*

Fri Nov 10 23:00:00 2006 Andreas Thienemann - 1.12-2
- Fix debug package

Sat Sep 9 00:00:00 2006 Andreas Thienemann - 1.12-1
- Updated to 1.12
- Finally updated the package name to what we are actually shipping,
obsolete old one.
- Included dd_rhelp

Fri Apr 8 00:00:00 2005 Michael Schwendt
- rebuilt

Mon Sep 6 00:00:00 2004 Marius L. Jøhndal - 0:1.10-0.fdr.1
- Updated to 1.10.

Sat Dec 13 23:00:00 2003 Marius L. Jøhndal - 0:1.03-0.fdr.1
- Updated to 1.03.
- Minor editing of description.

Tue Sep 30 00:00:00 2003 Marius L. Jøhndal - 0:1.02-0.fdr.1
- Initial RPM release.