Changelog for
km_wlan-28pre8-17.jacklab.1.i586.rpm :
Tue Sep 6 12:00:00 2005 - jgAATTsuse.de
- ipw2200: added broadcast fix by Peter Jones (bug 113634)
Mon Sep 5 12:00:00 2005 - jgAATTsuse.de
- added some defines as used in the original Makefile for building
ipw2100/ipw2200; allows debugging (bug 87329)
Mon Sep 5 12:00:00 2005 - jgAATTsuse.de
- ipw2200: set led=1 as default option (bug 115176)
- ipw2100: fixed crash on WPA enable (bug 115252)
Fri Sep 2 12:00:00 2005 - jgAATTsuse.de
- changed default driver for PC-Cards with Manufactor ID
0x0156 0x0002 from hostap_cs to orinoco_cs (bug 114514)
Thu Sep 1 12:00:00 2005 - jgAATTsuse.de
- ipw2200: increased disassociation timeout threshold to 24 again
(breaks association under some circumstances, see
http://www.bughost.org/bugzilla/show_bug.cgi?id=727)
- ieee80211: including wireless.h earlier in ieee80211.h (fixes
warnings about undefined WIRELESS_EXT)
- madwifi: update to CVS head (fixes Master mode and adds WDS
support)
Fri Aug 26 12:00:00 2005 - jgAATTsuse.de
- linux-wlan-ng: update to 0.2.2, changes (shortened):
- Fix an array overflow in the hotplug helper function.
- Added in-kernel devicetable for 2.6.13+ pcmcia
- Updates to bring prism2_cs into the newer 2.6 kernel APIs.
- Fixes in the hotplug invocation with WEXT (Pavel Roskin)
- use usb_reset_device() on 2.6 kernels (Andreas Schulte)
- PCMCIA card Ident fixes to coexist with orinioco driver
- Ignore unexpected ctlx responses. (Chris Rankin)
- Fix an off-by-one in scan results.
- [usb] Fix a memory leak (Chris Rankin
* Eroc Koenders)
- [usb] clean up the PDA Read function a bit. (Chris Rankin)
- [usb] Don\'t overwrite current CTLX URB before we\'re done with it.
- Fix a byte-order problem when parsing scan results (Eroc Koenders)
- Added a mib item (lnxRSNAIE) to get/set the WPA/RSNA IE.
- Applied a patch from Chris Rankin which should solve the hangs with
kernel preemption turned on.
- Fixed a series of bad memsets in prism2dl
- Added id for Viewsonic USB widget (Ekin Meroglu)
- Fetch the BSSID when we get an AP_CHANGE event
- netif_carrier_off/netif_carrier_on at appropriate times
- Hook up the dot11CurrentTxPowerLevel MIB in the prism2 code.
- CommsQuality now does the right thing with dBm values.
- A major USB patch from Chris Rankin. This rewrites the
command-queueing code to something considerably more sane.
- Further compile warning fixes on 64-bit targets (Pavel Roskin)
- Fix prism2_cs on 64-bit targets (Pavel Roskin)
- at76c503: fixed badness (bug 103146)
- rewrote switch_prism_script to work with new pcmcia device
tables of kernel 2.6.13
- add /etc/modprobe.d/prism2 which defines what prism2 driver to
use (default hostap)
- updated README files
- removed German LIESMICH files (out-of-date)
Wed Aug 17 12:00:00 2005 - jgAATTsuse.de
- rtl8180: intially added
- minor specfile cleanup
Thu Aug 11 12:00:00 2005 - jgAATTsuse.de
- madwifi: fixed a problem with broadcast packages
- removed obsolete files in /etc/pcmcia
Wed Aug 10 12:00:00 2005 - jgAATTsuse.de
- removed zd1201 firmware
Fri Aug 5 12:00:00 2005 - jgAATTsuse.de
- madwifi: update to current cvs head
- added /etc/modprobe.d/ipw2200 to set hwcrypto=0 as default
insmod option for ipw2200
Tue Aug 2 12:00:00 2005 - jgAATTsuse.de
- ipw2200: added fix for (some) problems in conjunction with
kernel 2.6.13
Mon Aug 1 12:00:00 2005 - jgAATTsuse.de
- rt2400: update to 1.2.2beta3, changes:
* Fix for channel change in Adhoc mode
- rt2500: update to 1.1.0beta3, changes:
* Channel change fix for adhoc mode
* Fix for association to non-broadcast AP\'s
* Fix to allow this device to create Adhoc networks
* 4kb stacks are now supported
* Rolling of changes in Ralink 1.4.6.1 + 1.4.6.2 release including:
* Fix- Mlme queue tail pointer
* Add- WPANONE
* Add- AUTH AUTO method
* Fix- racing condtion in mlme.c and rtmp_data.c
* Fix iwconfig - Link Quality(means Channel Quality),
Signal level and Noise level.
* Fix iwlist ra0 channel - print out
- rt2570: added initial version of this driver
Mon Jul 18 12:00:00 2005 - jgAATTsuse.de
- ipw2100: update to 1.1.2, changes:
* Fixed problem with driver_ipw
* Fixed problem with iwconfig set/get txpower
* Fixed problem with WEP
- ipw2200: update to 1.0.6, changes:
* Fixed problem with setting Tx power on A band
* Fixed problem with \'No space for Tx\'
* Fix hardware encryption (both WEP and AES) doesn\'t work with
fragmentation
* Fix is_duplicate_packet() bug for fragmentation number setting
- ieee80211: update to 1.0.3, changes:
* Cleaned up some prior merge regressions when syncing with
netdev-2.6
* Fix 64-bit warnings
* Fix to refernce of skb->priority after skb freed
Wed Jul 13 12:00:00 2005 - jgAATTsuse.de
- ipw2100: update to 1.1.1, changes (shortenend):
* Moved ieee80211 subsystem into its own object
* Added WE-18 support.
* Fixed problem with iwconfig set/get txpower
* Fixed problem with \'iwlist retry\' now showing min/max retry
* Fixed problem with network monitor is broken due to
netif_carrier_on is not called in ipw2100_open
* Fixed compatibility with wpa_supplicant and the new -Dipw
interface (that included a fix for 64-bit compatibility)
- ipw2200: update 1.0.5, changes (shortened):
* Fixed race condition during association causing firmware errors
* Fixed problem with building in 64-bit environment
* Fixed problem with SCAN_REQUEST_EXT sometimes failing
* Fixed problem with bit rate not decreasing when moving
laptop farther from AP
* Fixed problem with \'iwconfig eth1 mode auto\' and \'modprobe\'
locking the system
* Fixed problem with \"No space for Tx\" for hwcrypto=1
* Fixed kernel panic in rmmod caused by led work is still queued
* Fixed problem with network doesn\'t reassociate after suspend/resume
* Fixed problem with \'iwprvi sw_reset\' not resetting the card from
monitor mode
* Fixed problem with monitor mode being used after a WEP key has
been configured
* Add duplicate packet checking code (kill ping DUP! and TKIP replay
warning)
* Fix hardware encryption (both WEP and AES) doesn\'t work with
fragmentation
* Removed ieee80211 subsystem from being part of the distribution.
* Fixed problem with open APs not working with wpa_supplicant
* Fixed problem with \'iwconfig eth1 frag 0\' hanging the shell
* Fixed problem with adapter not fully powering off during suspend
to RAM or when module unloaded.
* Improved support of iwlist freq|chan and setting of channels via
iwconfig to correctly check channel limits (added ieee80211_geos)
* Added iwpriv sw_reset extension to reset sw parameters
* Added speed_scan channel scan list support
* Modified the driver to load the EEPROM data even if RF KILL is
active during driver load
* Fixed problem with kernel oops if mode auto; modprobe -r ipw2200
* Added QoS (CONFIG_IPW_QOS) support
* Fixed some race conditions wich channel changes, association,
and scan abort that could periodically cause a firmware restart
* Fix problem with OOPS on module load
* Added support to merge between adhoc networks
* Added support for iwspy
- linux-wlan-ng: modified makefiles to strip unwanted installations
paths
Fri Jul 8 12:00:00 2005 - hareAATTsuse.de
- Fix build for 2.6.13.
Fri Jul 8 12:00:00 2005 - jgAATTsuse.de
- at76c503: fixed kernel panic (bug 90649)
- acx100: update to bugfix release 0.2.0pre8_plus_fixes_57
- madwifi: added includes where needed
Fri Jun 10 12:00:00 2005 - meissnerAATTsuse.de
- use RPM_OPT_FLAGS
Wed Jun 1 12:00:00 2005 - roAATTsuse.de
- rfswitch: do not build kernel modules for kernel-um
Tue May 17 12:00:00 2005 - jgAATTsuse.de
- wireless-tools: update to 28pre6, changes:
- Make static lib use PIC objects [Makefile]
- Add SYSFS selector support to ifrename [ifrename]
- Fix a fd leak in pcmciaslot selector [ifrename]
- Don\'t complain about eth0/wlan0 if takeover enabled [ifrename]
- Update man pages for sysfs and eth0/wlan0 [ifrename.8]
- Update man pages for frequ auto/off [iwconfig.8]
- More clever manual loading and docking tricks [HOTPLUG.txt]
- Czech (cs) man pages [cs/
*]
- Fudge patch below for better integration [iwconfig/iwevent/iwlist]
- WE-18/WPA event display [iwevent]
- WE-18/WPA parameter display [iwconfig]
- acx100: update to bugfix release 0.2.0pre8_plus_fixes_56
- adm8211: update to release 20050323, changes:
- Added private ioctl to tune antenna power, lpf cutoff, and lnags
threshold
- Made txpow ioctl actually work
- Added documentation for these ioctls
- ipw2100: do not build driver when ACPI is disabled in kernel
configuration (bug 84029)
- fixed Makefiles to not build drivers when wireless support is
disabled in kernel configuration (bug 84027)
Sun Mar 20 11:00:00 2005 - jgAATTsuse.de
- removed zd1201 driver as it is already provided by the kernel
package now
Wed Mar 16 11:00:00 2005 - jgAATTsuse.de
- rt2500: do not reset security mode when changing default WEP key
index (bug 72339)
Thu Mar 10 11:00:00 2005 - jgAATTsuse.de
- linux-wlan-ng: install /etc/pcmcia/wlan-ng
* in $RPM_BUILD_ROOT
(again)
Wed Mar 9 11:00:00 2005 - jgAATTsuse.de
- linux-wlan-ng: moved unused wlan-ng scripts to docdir to serve
as examples (bug 66473)
- rt2x500: added latest fixes (bug 71674)
Mon Mar 7 11:00:00 2005 - jgAATTsuse.de
- changed firmware path from /usr/lib/hotplug/firmware to
/lib/firmware in firmware install scripts
- changed firmware path in README.firmware and LIESMICH.firmware
- updated README.wpa and LIESMICH.wpa
Mon Feb 21 11:00:00 2005 - jgAATTsuse.de
- rt2400: update to 1.2.2-beta2, changes:
* ifconfig support for spoofing MAC address
* Fix for setting of BSSID (982890)
* Fix for setting of non-existent ESSID (1034910)
* For for TX packet counters
* RFMON support
* sysfs support for HAL and NetworkManager
* Dynamic interface naming support through module parameter
- rt2500: update to 1.1.0-beta2, changes:
* kmalloc stability fixes to the MLME
* Cleanup on memory management functions (NDisFill/Move/Zero)
* Rollin of Robin Cornelius RFMon Patch
* RFMon support through iwconfig mode
* Rolling of changes in Ralink 1.4.5.0 release
* Spinlock changes for stability
* Fix for frequency values
* Fix for link quality reporting (RobinC)
* General Stability Improvements
* sysfs support for HAL and NetworkManager
* Dynamic interface naming support through module parameter
- disabled rt2400 and rt2500 drivers on SMP kernels (not yet
supported)
Tue Feb 15 11:00:00 2005 - agruenAATTsuse.de
- Install target must do a modules_install in the kernel sources.
Tue Feb 15 11:00:00 2005 - roAATTsuse.de
- re-add install target to madwifi modules Makefile
Mon Feb 14 11:00:00 2005 - jgAATTsuse.de
- added drivers for Ralink rt2400 and rt2500 devices
- adm8211: update to release 20050208, changes:
* Change linkup timeout to 3 seconds
* Use flags in ieee80211_data structure
* Rescan if the link doesn\'t go up in 2 seconds
- ipw2100: update to 1.0.5, changes (shortened):
* Fixed problem with \'iwpriv eth1 reset\' not working
* Removed legacy firmware loading support
* Possible fix for #problem of scans not always showing up
- ipw2200: update to 1.0.1, changes (shortened):
* iwconfig rate support
* Improved link signal quality calculation
* Added support for Intel PRO/Wireless 2225BG Network
Connection adapter
* Fixed a problem with sensitivity threshold during association
* Added iwpriv for turning forcing long preamble support
* Fixed locked BSSID reporting channel number
* Added initial support for WPA
- madwifi: update to current cvs
Tue Feb 8 11:00:00 2005 - jgAATTsuse.de
- zd1201: fixed makefile issue
Tue Feb 8 11:00:00 2005 - roAATTsuse.de
- zd1201: do not try to install firmware during kernel build
Mon Feb 7 11:00:00 2005 - jgAATTsuse.de
- ipw2100: update to 1.0.4, changes:
* New logic to attempt to catch hung firmware (possibly caused by
bad AP frame received)
* Fixed problem with wrong arguments being passed to set_security
* Fixed problem with disassociation events not being sent to user
space when firmware is being restarted
* Fixed problem with suspend not working
* Fixed problem with stats not being usable by non iwconfig
wireless tools
- ipw2100: obsolete set-security patch removed
- ipw2200: update to 1.0.0, changes:
* Fixed part of problem with an AP never being considered for
association (storming) if the jiffies rewind problem occurs
- added driver and firmware for ZyDAS ZD1201 devices
Fri Jan 28 11:00:00 2005 - jgAATTsuse.de
- wireless-tools: update to 28pre4:
* Add option for stripping symbols on tools [Makefile]
* Add escaping of essid keyworks with -- in manpage [iwconfig.8]
* Update sensitivity description [iwconfig.8]
* Fix iw_print_timeval() for timezone [iwlib/iwevent]
* Escape interface name for --help/--version with -- [iwconfig]
* Allow --help/--version to be interface names [iwlist]
* Fix invalid sizeof for stat memcpy in easy scanning API
[iwlib.c]
* Fix my horrendous spelling [HOTPLUG.txt/PCMCIA.txt/README/
*.8]
- adm8211: update to release 20050124:
* Remove bogus test for monitor mode
* Fix monitor mode opps
* Make sure we\'re not scanning before reporting scan results
* Use time_after in ieee80211_associated
* Remove NAPI from todo list
* Enable LLTX
- linux-wlan-ng: update to 0.2.1pre26:
* Fix the \"no hardware found\" bug in 2.6.10+ kenels
* Cleanups in the Makefiles and build system
* Fix a typo in the shared.prism2 script
* Fix a nice race condition on device registration.
* Don\'t stop the netdev when we hit ifstate_disable.
* hw->state wasn\'t being set properly on drvr_stop, nor were we
clearing the port status in all cases.
* Fix the \"Debug: sleeping function called from invalid context\"
under 2.6 with prism2_usb
* Wireless extension SCAN support
* 2.6 sysfs support in the form of SET_NETDEV_DEV
* Fix a brown-paper bag bug in the register_wlandev code
* Patch for the Sitecom WL-022 widget
* Build fix for ancient ETHTOOL versions
- ipw2200: update to 0.21:
* Provided __iomem typedef for pre-2.6.9
* Changed firmware event/error log dumping to be masked with
IPW_DL_FW_ERRORS flag.
* Fixed compilation warnings when CONFIG_IPW_DEBUG and
CONFIG_IEEE80211_DEBUG are not defined
* Fixed warning on unused return code from
pci_set_consistent_dma_mask
* Fixed problem after any resume
* Fixed problem after S4 resume
* Fixed problem with bridged networks and Ad-Hoc by adding
target MAC to station table, regardless of if they are
actual Ad-Hoc cells
* Fixed problem with setting mode immediately after load
causing failures
* Incorporated fixes to use __iomem
* Fixed support for 64-bit platforms
* Fixed problem with pci_alloc_consistent being handed a u32
instead of dma_addr_t
* Fixed problem w/ non-encrypted 802.1x authentication (driver no
longer disassociates on privacy capability change -- similar to
the behavior of ipw2100)
* Fixed problem w/ resetting nic possibly leaving status
variable bit set for a command being active.
* Fixed problem w/ scan results not providing signal and level
statistics
Wed Jan 12 11:00:00 2005 - jgAATTsuse.de
- acx100: update to bugfix release 0.2.0pre8_plus_fixes_44
- adm8211: update to release 20041227, chnages:
* Updated suspend/resume stuff for 2.6.10
* Crypto API and ARC4 now used for WEP
* EEPROM better documented
* Add more CSRs
* Fix ordering in adm8211 tx header
- ipw2200: update to 0.19, changes:
* Fixed problem with unlocking the wrong spin lock
* Restructured how the Link Quality is computed
* Restructured how the scan channel list is constructed
* Fixed problem with resume not working when coming from S3
* Fixed problems with fragmentation not working
* Fixed problem with packet latencies due to background scanning
* Fixed problem with some packets not being received due invalid
Rx filtering of BSSID
* Added SCAN watchdog to detect when scanning is not completing
- linux-wlan-ng: update to 0.2.1pre24, changes:
* Fix build on 2.6.10-rc
* Fix USB build on 2.6.x (x < 7)
* Suspend the USB driver cleanly
* Fix more USB badness
* scan_timeout WAY too long
- madwifi: build fix for kernel 2.6.10
Wed Dec 15 11:00:00 2004 - jgAATTsuse.de
- wireless-tools: update to version 28pre3, changes (shortened):
* Fix buffer memory leak in scanning [iwlib/iwlist]
* Increase scanning timeout for MadWifi
- acx100: update to bugfix release 0.2.0pre8_plus_fixes_43
- adm8211: update to release 20041111, changes (shortenend):
* Fix reauthentication after deauthentication
* Detect hidden SSID properly
* Tolerate bad beacons/probe resp from stupid APs
* Fix deauthentication handling in ieee80211 code
* Adhoc on ADM8211B and up fixed
* Fix bug in hidden SSID support
- ipw2100: update to 1.0.2, changes (shortened):
* Fixed problem with a deadlock when setting the MAC address
* Fixed Shared Key authentication to support differnet default Tx
index keys
* Fixed problem with networks showing up as
* Fixed problem with multicast and broadcast packets being
fragmented
* Fixed Lockup/Panic/etc. on rmmod/modprobe looping
* Fixed problem with AdHoc networks not being created
* Fixed problem with adapter not shutting down on module unload
* Changed delay for the wireless event (after association)
in an attempt to correct WPA problems
* Fixed race condition during reset
* Added status, cfg, and capability sysfs entry
* Removed cardmem, txqueue, and rxqueue sysfs entries
* Fixed changing authentication mode resets the wep key
* Fixed - txpower values are inverted
* Significant changes to key management routines, especially in
regard to multiple WEP key support
* Added support for setting the TX power while in Ad-Hoc mode
* Fixed problem with WPA PSK not working
* Fixed iwconfig rts off/auto not supported
* Report firmware version via ethtool
* Fixed problem with scan results not expiring
* Added stub for dynamically disabling C3 when PCI latency problem
is detected
- ipw2200: update to 0.18, changes (shortened):
* Adjusted the behavior of ad-hoc to act much more like the
ipw2100 does. This addresses several bugs relating to the
formation/reformation of ad-hoc networks.
* Added noise statistic reporting for current association
* Fixed \"associate\" module parameter so that it works as the
README states
* Fixed signal strength reporting.
* Added AP roaming support (via 802.11 re-association requests)
* Fixed WEP use with ad-hoc mode
* Fixed problem with SSIDs being scrambled when hidden
networks detected
* Fixed problem with 802.11b networks being extremely slow
* Added support for multi-mode access points
* Fixed problem with link state no longer being detected by
ethtool
* Fixed bug which kept the driver from being able to use a default
crypto key other than the first or second key
* Reduced interval of scan requests
- linux-wlan-ng: updater to 0.2.1pre23, changes:
* Fix badness in 2.6.10-rc1
* Compile fix for 2.6.9-rc4+
* Add support for x86-64 (and possibly other 64-bit targets)
* Fix linkstate if driver reset without unloading
* Rename the man pages to have a .1 extension
* put a \'sleep 1\' in the firmware load sequence to improve
reliability
* Add Linksys WUSB11 card ident
- madwifi: update to current cvs (2004-12-15)
- madwifi: added multiple essid support (bug 48065)
- madwifi: build and install 80211stats and athstats now
Thu Nov 11 11:00:00 2004 - roAATTsuse.de
- fixed file list
Thu Oct 21 12:00:00 2004 - jgAATTsuse.de
- acx: changed default firmware path to /lib/firmware
Mon Oct 18 12:00:00 2004 - jgAATTsuse.de
- fixed broken adm8211 Makefile
Mon Oct 18 12:00:00 2004 - jgAATTsuse.de
- ipw2200: update to 0.12 (fixes bug 46435),
from CHANGES (slighlty shortened):
* Changed alloc_skb to use GFP_ATOMIC vs. GFP_ATOMIC| GFP_DMA
GFP_ATOMIC needs to be used as GFP_KERNEL may block,
and the call is made from the default work queue during
adapter load
* Added additional debug output during association to indicate
security parameters (to assist in connection debugging)
* Misc cleanups
* Fixed problem with setting an ESSID to a network that doesn\'t
exist in Managed mode
* Fixed problem with privacy capability not being compared
correctly when assessing viability of a network for association
* Added support for shared key authentication (aka \'restricted\')
* Added debug level output into ieee80211
* modules
* Added support for setting the TX power
* Added support for setting the fragmentation threshold
* Added PSP power management support
* Added support for suspend / resume
* Corrected support of \'iwlist ${IFNAME} bitrate\'
* Corrected support of \'iwlist ${IFNAME} power\'
* Fixed problem with manual disabling of RF via rf_kill sysfs
entry wasn\'t resulting in the card actually being disabled
* Added mode module parameter so you can start the device in
either Managed or AdHoc mode
* Modified logic for detecting hidden SSIDs to work with how
Linksys APs do it.
* Hooked in the rest of AdHoc code
* Added adhoc_create module parameter for configuring the driver
to auto create a network if you have provided the channel and
network name
* More changes to the scan logic, adding more debug output to
indicate why specific networks are chosen over others
* Added a printk() to the pci probe indicating if it detects a
2915ABG or 2200BG adapter.
* Fixed problem with setting IW_MODE to AUTO
* Fixed problem with device coming up even if manual disable
specified
* Fixed problem with udev (or anything else that parsed all
sysfs entries) with causing error log storms to the kernel log
* Fixed support for all 802.11G extended rates
* Ad-Hoc code starting to show up
* Added mode switching support
* Enhanced the iwlist scan results to (hopefully) be more clear
on various statistics.
* Added support for restricting the 802.11 mode via a iwpriv
method
* Fixed UNKNOWNSTATUS_ERROR if AdHoc beacon received while in
managed mode
* Fixed UNKNOWNSTATUS_ERROR if RF kill enabled when loading
driver
* Reworked IE parser to use an iterative loop
* Fixed stricter type checking errors
* Fix oops in ieee80211_crypt_free
* Fixed module reference counting of ieee modules
* Fixed oops if CONFIG_NETLINK enabled
* Misc. code cleanups
* Changed AP detection logic so that it only considers a probe
response to be a duplicate if both the BSSID and ESSID match
* Modified load sequence such that if the RF switch is disabled
during load it doesn\'t try and bring up the network
* Modified dev->open so that it doesn\'t start the queue unless
it is associated
* Sync\'d ipw2100\'s ieee80211 module changes
- ipw2200: removed patches becoming obsolete due to driver update
- ipw2100: update to 0.56 (needed for ipw2200 update),
from CHANGES (shortened):
* Changed ipw2100_netdev to use netdev_priv
* Changed use of timers for RF switch check and hang check to
use deferred workqueue
* Remapped debug numbering such that lower numbers produce fewer
messages
* Fixed problem with TX Watchdog kicking in occassionally if WPA
is being used
* Fixed latest wireless tools reporting failure when using
\'iwconfig ethX power on\'
* Fixed problem with 802.1x not working with in configurations
where WEP was enabled
* Changed \'Corruption detected\' message to \'PCI latency error
detected\' to remove confusion of there possibly being disk data
corruption
* Fixed spurious interrupt problem if driver fails to load
* Fixed support for manual disable switch
* Fixed resume maintaining manual disable state
* Fixed sysfs permissions on module parameter entries
* Synchronized ieee80211 with ipw2200 v0.11
* Fixed problem with channels not being reported in scan output
* Fixed ordering of scan results to keep networks in order across
iterative probe receipts
* Fixed scan aging to be based on time vs. scan count
* Added time since last beacon received to scan output
* Pulled out 2.4 specific #ifdef/#endif blocks
* Reduced command timeout to 0.5s vs 3s
* Added command_send check to the hang_check to try and identify
hung firmware
Thu Sep 30 12:00:00 2004 - jgAATTsuse.de
- take last update back (broke ipw2200 WEP support, bug 46527)
Wed Sep 29 12:00:00 2004 - jgAATTsuse.de
- ipw2200: update to 0.9, changes:
* Fixed support for all 802.11G extended rates (bug 46435)
* Ad-Hoc code starting to show up. You can now create Ad-Hoc
networks and join with other cells. Data Tx/Rx is still in the
works.
* Added mode switching support to WX:
% iwconfig eth1 mode (managed|ad-hoc)
* Enhanced the iwlist scan results to (hopefully) be more clear
on various statistics.
* Added support for restricting the 802.11 mode via a iwpriv method.
See README.ipw2200 for more information.
* Fixed UNKNOWNSTATUS_ERROR if AdHoc beacon received while in
managed mode
* Fixed UNKNOWNSTATUS_ERROR if RF kill enabled when loading driver
* Reworked IE parser to use an iterative loop, based on Pedro
Ramalhais\' original WPA port
* Fixed stricter type checking errors
* Fix oops in ieee80211_crypt_free
* Fixed module reference counting of ieee modules
* Fixed oops if CONFIG_NETLINK enabled
* Misc. code cleanups (extra casts removed, unused function warning)
* Changed AP detection logic so that it only considers a probe
response to be a duplicate if both the BSSID and ESSID match
(allowing a single BSSID to broadcast multiple ESSIDs)
* Modified load sequence such that if the RF switch is disabled
during load it doesn\'t try and bring up the network.
* Modified dev->open so that it doesn\'t start the queue unless it
is associated
- dropped obsolete patches for ipw2200
- building seperate ieee80211-modules for ipw2100 and ipw2200
as they are not compatible currently
Wed Sep 29 12:00:00 2004 - jgAATTsuse.de
- ipw2100: update to 0.55, changes:
* Fixed rmmod oops in ieee80211
* Merged in WPA code
* Fixed IPW2100_DEBUG_FW to IPW_DEBUG_FW
* Fixed suspend/resume
* Misc. code cleanups (extra casts removed, unused function
warning)
* Added filtering of corrupted 802.11 frames in rfmon mode
- building ipw2100 and ipw2200 together now (they share code,
makes building easier)
- update madwifi to current CVS (fixes WPA support)
- added README.wpa README.prism2 and German translation of REAMDEs
- added switch_prism_driver (script helping to switch drivers for
prism2 pcmcia cards)
- ipw2200: fixed compiler warnings
Mon Sep 27 12:00:00 2004 - jgAATTsuse.de
- updated README.firmware
Tue Sep 21 12:00:00 2004 - jgAATTsuse.de
- ipw2200: fixed hard freeze when radio switch is off (bug 45690)
Mon Sep 20 12:00:00 2004 - jgAATTsuse.de
- ipw2100: removed WPA patch (may cause machine freeze)
Mon Sep 20 12:00:00 2004 - jgAATTsuse.de
- ipw2200: update to 0.8, changes (shortened):
* Fixed rate reporting
* Added support for associating with 802.11a APs
* Improved quality/signal level reporting
* Misc. code cleanups
* Modified the AP selection logic to pick the AP with the
strongest signal that meets the other configured criteria
* Modified AP selection logic to discard APs whose scan age
has expired
* Added code to set the sensitivity in the firmware upon
association
* Added code to correctly seed the random number control in the
firmware
* Added code to try and correct the intermittent failure seen
sometimes while loading the driver.
* Added code to detect when enough beacons have been missed to
trigger a disassociation, and to then invoke the disassociation
- ipw2100: added WPA support, added patch to improve behaviour
on software suspend
- madwifi: update to current CVS (adds support for x86-64)
Wed Sep 8 12:00:00 2004 - jgAATTsuse.de
- ipw2200: update to 0.7, changes:
* Fixed support for associating with G-only APs (and also
supporting all of the G/B-rates in Mixed mode)
* Modified iwconfig output to report either \'unassociated\' or
\'ieee 802.11{band}\' where band is one of a, b, or g.
* Fixed error preventing modprobe from consistently working
Fri Sep 3 12:00:00 2004 - jgAATTsuse.de
- acx100: update to 0.2.0pre8_plus_fixes_29
- adm8211: update to 20040901
- ipw2100: update to 0.54, changes (shortened):
* Test fix for spurious IRQs during firmware intialization.
* Fixed payload_size bug in fragmentation code
* Removed \"IRQ ignored\" message.
- ipw2200: update to 0.6, changes (shortened):
* Updated firmware interface to support new extended scan
* Added ABG PCI ids
* Added support for G data rates.
* Partial support for A data rates.
* Partial change for reporting link quality through iwconfig --
not completed.
* Misc. code cleanup
* Fixed problem with load retry logic re-allocating Rx buffers
repeatedly (skb leak)
* Fixed SWSUSP compilation dependency to CONFIG_SOFTWARE_SUSPEND2
* Fix the initialization code
* Report firmware version via ethtool
* Fixed TCP session freezing problem
* Added support for non-broadcasting ESSIDs
- update wireless-tools to 27pre26, changes (shortened):
- Sett proper size on SIOCGIWSTATS requests [iwlib]
- Fix wrq.u.data.flags => wrq.u.txpower.flags [iwconfig]
- Added dry-run support (only print name chages) [ifrename]
Tue Aug 24 12:00:00 2004 - roAATTsuse.de
- add install target to ipw2100-Makefile
Mon Aug 23 12:00:00 2004 - jgAATTsuse.de
- added rfswitch modules (for notebooks with software only radio
switch)
- acx100: update to 0.2.0pre8_plus_fixes_26
- adm8211: update to 20040821
- ipw2100: update to 0.53, changes:
* Fixed completely broken proc init/destruct code
* Fixed problem with new get_power not returning any string output
* Fixed SWSUSP2 build dependency check to CONFIG_SOFTWARE_SUSPEND2
* Changed read to sys_read, etc. to fix legacy firmware
compilation problems
* Added code to remove workqueue on PCI init error path
* Added dvals, load, and unload scripts.
* Updated in-kernel patch to 2.6.8
- ipw2200: fixed kernel oops on hwscan (bug 43987)
- ipw2200: fixed sysfs device links
- madwifi: update to cvs 20040832
- madwifi: fixed compilation error on kernel 2.6.8
Tue Aug 17 12:00:00 2004 - schwabAATTsuse.de
- Fix missing declarations.
- Fix stupid casts.
Tue Aug 17 12:00:00 2004 - jgAATTsuse.de
- ipw2100: update to 0.52, changes (shortended):
* Fixed problem with NULL embedded ESSIDs being used while the
HW is not initialized.
* Fix #162 - Attempts to set power options other than ON/OFF with
\'iwconfig eth1 power\' now fail. Clarified power level report
out when get_power is used.
* Fixed #166 - setting more than 5 keys affects active key.
Any attempt to set a key outside the range 1-4 will result in
Invalid Argument.
* Added compilation support for having the SWSUSP patch installed
- added ipw2200 driver (supports Intel PRO/Wireless 2200 cards)
Fri Aug 13 12:00:00 2004 - jgAATTsuse.de
- ipw2100: minor compile fixes
Fri Aug 6 12:00:00 2004 - jgAATTsuse.de
- at76c503: update to 0.12beta13
- added driver adm8211 (for 802.11 ADMtek cards)
- disabled prism_cs for all drivers by default, default is now
hostap_cs
- added /etc/pcmcia/hostap_cs.conf
- madwifi: update to latest cvs (adds support for latest
Atheros 5212 based cards)
- madwifi: Makefile cleanups
Mon Aug 2 12:00:00 2004 - jgAATTsuse.de
- update ipw2100 driver to 0.51, changes (shortened):
* Fixed setting of Level to 0 when not connected; fixed problem
with waproamd not detecting when association is lost.
* Fixed problem with connection state going out of sync with
association when interface closed.
* Added \'associate\' module parameter to instruct the driver if
it should auto-associate during scans. Useful when using a
user space utility for association policy.
* Added reporting of level # for iwpriv ${IF_NAME} get_powermode
* Fixed code from using default workqueue to using a custom
workqueue. This will (hopefully) fix any issues with keyboard
craziness
* Fixed TX stall with MTU at 1500 (bug 133)
* Removed av5100 and pbe5 modules from the IPW2100 project
* Removed dependency on Host AP for WEP
* Pulled all ieee80211
* generic code into stand alone modules
* Started cleaning up and reworking the ieee80211_tx fragmentation
code.
* Added fix to stop network degradation after ICV mismatches
* _3 Fixed OOPS if RF switch disabled while loading the module
* _2 Added firmware restart backoff algorithm -- you should no
longer have a resource starved system if a restart storm hits.
* Set default bit rate mask to only cover valid rates
* Added ability to get/set expiration age for scans via proc
* Fixed kernel oops if queue allocation fails
* Fixed problem with using IPV6 when compiled as a module
* Added mode and channel module parameters
* Restructured the C3 corruption detection logic to be more
agressive at detection in an attempt to minimize interface
downtime due to corrupt data
* Added support for setting TX rates
* Fixed problem with interrupt conflicts during suspend/resume
and init while loading the microcode
* Fixed kernel oops and system lockups under heavy small packet
load
* Fixed support for providing custom MAC address
* Added Ad-Hoc support
- removed hostap module since ipw2100 does not depend on it anymore
- madwifi: switch to WPA branch
- update wireless-tools to 27pre25, changes:
* Easy scanning API (blocking & non-blocking) [iwlib]
* Add channel only support to iwgetid [iwgetid]
* Compile iwgetid with iwlib for above [Makefile/iwgetid]
* Fix french man pages to not use special \'oe\' char [fr/
*.8]
* Use hyphens instead of underscores in Debian docs [
*.txt/
*.7]
* Update for WE-17 (wrq.u.freq.flags, IW_QUAL_
*) [all]
* Use iw_get_ext() instead of ioctl() [iwgetid]
* Retry getting scan results with larger buffer [iwlist/iwlib]
* Display wireless event capabilities [iwlist]
* Add support for relative TxPower (yick !) [iwconfig/iwlist]
* Create iw_print_txpower() [iwlib]
* Add \"Set\" prefix for all SET wireless events [iwevent]
* Add support for get_freq and get_essid events [iwevent]
* Reorganise iw_print_freq() => create iw_print_freq_value() [iwlib]
* Create iw_channel_to_freq() and use it [iwlib/iwconfig/iwevent]
* Fixup for WE-18 : Set scan takes an iw_point [iwlist/iwlib]
* Fixup for WE-19 : Take care of IW_EV_POINT_OFF [iwlib]
- update acx100 driver to 0.2.0pre8_plus_fixes_23
Tue May 18 12:00:00 2004 - jgAATTsuse.de
- fixed specfile (build broke without kernel-source)
Tue May 18 12:00:00 2004 - jgAATTsuse.de
- update ipw2100 driver to 0.44:
* Firmware updated
* Monitor mode support added
* Improved signal quality metric
* Changed aging of scan results such that if a beacon or response
isn\'t received within 3 scan\'s, it is not listed in scan
results
* Added support for 802.1x EAP authentication
* Fixed \'badness in local_bh_enable\'
* Increased timeout for detecting the hardware coming to life
* Fixed boot time initialization failure
* Added CONFIG_IPW2100_RX_DEBUG for dumping packet contents in
the event that a WEP packet\'s ICV fails.
- added modified hostap-driver-0.1.3 source, so ipw2100 does not
depend on package km_hostap anymore
- rewrote most makefiles
- updated URLs in README.firmware
Wed May 5 12:00:00 2004 - jgAATTsuse.de
- fixed build problems with ipw2100 (did not find hostap-driver
source while building kernel)
Wed May 5 12:00:00 2004 - jgAATTsuse.de
- update wireless tools to 27pre22
- update ipw2100 driver to 0.42, from CHANGES (shortened):
* Test fix for WEP/SSL stalls.
* Test fix for CONFIG_IP_NF_CONNTRACK hang/oops/crash (Badness in
local_bh_enable)
* Added fix to kill hang check timer if initialization fails
* Added code to remove scan entries if a beacon has not been
received within the last 2 seconds.
* Fixed ipw2100_power_cycle_adapter to use write_register instead
of write_nic_dword
* Lots of new instrumentation to assist in tracking down problems,
most notably /proc/net/ipw2100/[if_name]/memory.
* Changed excessive retry statistics to report the number of
failures vs. just the number of retries.
- update linux-wlan-ng driver to 0.2.1pre21,
from CHANGES (shortened):
- Added in beginnings of IWSPY support
- Primary/Secondary firmware (finally) bundled with the driver.
- Convert to newer 2.6 module parameter code.
- Fix an inverted test in GIWENCODE wireless extension
- Minor script fix for SSF cards
- Fixes for SSF PCI cards
- Fix script problems that result in a failed init returning
success
- Fix an endian-ness buglet in prism2sta.c
- Fix up pci resources on card init failure on plx card.
Tue Apr 27 12:00:00 2004 - jgAATTsuse.de
- fixed typo in ipw2100 Makefile
Mon Apr 26 12:00:00 2004 - jgAATTsuse.de
- updated wireless tools to 27pre20 (minor changes, mainly
documentation updates and fixes, see CHANGELOG.h)
- updated acx100 driver to 0.2.0pre8 (lot of fixes, see ChangeLog)
- at76c503: compile fix (bug 39105)
- updated ipw2100 driver to 0.41 (introduces WEP support, lot of
changes and fixes, see CHANGES)
- update madwifi driver to current cvs
- fixed madwifi kernel badness on rmmod (bug 37352)
- improved madwifi LED control a bit
- merged patches for the different drivers
- specfile cleanup
- prevent drivers from being build in case wireless support is
disabled in kernel config
Wed Apr 7 12:00:00 2004 - meissnerAATTsuse.de
- The ipw modules need to include linux/init.h because they use
__init.
Mon Apr 5 12:00:00 2004 - jgAATTsuse.de
- installing atmel.conf as /etc/pcmcia/atmel-suse.conf to prevent
conflict with atmel.conf of atmel-firmware package
Sat Apr 3 12:00:00 2004 - jgAATTsuse.de
- fixed sysfs support in linux-wlan-ng drivers (bug #37278)
- fixed sysfs support in acx100 driver
Fri Apr 2 12:00:00 2004 - jgAATTsuse.de
- fixed oops in madwifi driver (bug #37944)
- added /etc/pcmcia/atmel.conf so driver for Atmel based pc-cards
will be loaded (bug #37905)
Wed Mar 31 12:00:00 2004 - jgAATTsuse.de
- typo fix in install_intersil_firmware
Tue Mar 30 12:00:00 2004 - jgAATTsuse.de
- skip building of at76c503 when CONFIG_NET_WIRELESS is unset
(bug #37450)
Mon Mar 29 12:00:00 2004 - agruenAATTsuse.de
- Fix external kernel module build (unresolved symbols).
Mon Mar 29 12:00:00 2004 - jgAATTsuse.de
- re-added at76c503 driver (Atmel USB adapters)
- updated Intel PRO/Wireless 2100 driver to 0.39 (shortened):
* Fixed suspend/resume support C3 issue
* Moved timer kill to ipw2100_down from the exit routine to stop
timers when the interface goes down
* Modified range settings for quality and level
* Added /proc/net/ipw2100/[if_name]/internals to display some
internal variables to help track issues.�
Fri Mar 26 11:00:00 2004 - jgAATTsuse.de
- updated Intel PRO/Wireless 2100 driver to 0.38 (shortened):
* Added SW RF Kill switch support for Packard Bell EasyNote E5
* Fixed RSSI to DBM constant from 98 to 90
* Added patch for quality metrics in /proc/net/wireless
* Refactored the start/stop code into ipw2100_up / down, and
hooked the code into the suspend/resume code.
* Added a 2s heartbeat timer to the firmware; if the RTC
stalls then a reset is performed.
* Fixed ISR code to use a tasklet instead of scheduled work
(fixes \'hw_command_send timed out\' during firmware restart)
* Added \'firmware resets\' and \'firmware hangs\' counters to
/proc/net/ipw2100/[if_name]/stats
* Fixed /proc/net/ipw2100 cleanup on exit
* Added initial eth_tool support for link detection
* Switched ISR code to a scheduled work item
* Fixed pci_free_consistent bug in ipw2100_msg_free
* Added dumping of status structure if payload size reported
to be greater than allowable 802_11 payload size.
* Added firmware restart on bogus payload size
- added section about Atmel cards in README.firmware
- removed prism54 driver (is now part of linux kernel)
- fixed sysfs support in madwifi
Fri Mar 19 11:00:00 2004 - jgAATTsuse.de
- updated Intel PRO/Wireless 2100 driver to 0.35:
* Added wireless extension get range support
* Added /proc/net/ipw2100/[if_name]/{ordinals,hw,registers,pci}
for dumping various pieces of data.
* Code cleanup in a couple spots
* Removed max transit unit (MTU) check in isr_rx (should fix MTU
conflict some users are seeing)
* Modified code path so that if wake_up_sync is not defined,
we define wake_up_interruptible_sync to wake_up_interruptible
so that the __wake_up_sync patch is no longer needed.
* Added initial start for suspend/resume (thanks to Len Brown).
Fri Mar 19 11:00:00 2004 - jgAATTsuse.de
- removing .orig files before packaging
Thu Mar 18 11:00:00 2004 - jgAATTsuse.de
- updated Intel PRO/Wireless 2100 driver to 0.34:
* ACPI C3 conflict resolved
* Added HW register and PCI configuration data dump entries to
proc/net/ipw2100/[if_name]/{hw,pci}
* Added hotplug firmware loading support
* Added interface name module parameter (if_name)
* Added port IO debug output for tracing IO to the actual
hardware (IPW2100_DEBUG_IO)
* Moved proc info into /proc/net/ipw2100 from /proc/ipw2100
* Added support for /proc/net/wireless (thanks to Luc Saillard).
- madwifi (madwifi-ibm_led.dif):
added support for WLAN LED on IBM Thinkpads
Tue Mar 16 11:00:00 2004 - jgAATTsuse.de
- fixed typo in install_intersil_firmware
- changed initial mac address to 00:00:00:00:00:00 so our tools
can identify the address as a dummy (prism54)
Mon Mar 15 11:00:00 2004 - jgAATTsuse.de
- updated Intel PRO/Wireless 2100 driver to 0.32:
* Added support for toggling RF switch
* Added IPW2100_DEBUG_RF_KILL to monitor RF transitions in debug
log
* Fixed module fault on iwconfig ethX nick (thanks Radu Graeb)
* Hardware reset now supported
* Support for hardware reset in response to fatal_interrupt
* proc oops fixed (thanks to Radu Greab)
* Fixed problem with dev->mem_end being set incorrectly
* Fixed oops with accesing some iwconfig query commands while the
driver is uninitialized.
- added README.firmware
- added scripts for easy installation of Intersil PrismGT and
ACX100 firmware files
Fri Mar 12 11:00:00 2004 - jgAATTsuse.de
- added driver for Intel PRO/Wireless 2100 card (aka Centrino)
Wed Mar 10 11:00:00 2004 - jgAATTsuse.de
- disabled all drivers for um-kernel
Tue Mar 9 11:00:00 2004 - roAATTsuse.de
- kmakefiles: don\'t build for um-kernel
Tue Mar 9 11:00:00 2004 - jgAATTsuse.de
- updated madwifi driver to current cvs (fixes incompatibility
with CONFIG_REGPARM, bug #34140)
- readded accidentally removed acx100 driver
- using orinoco_cs as default driver for Netgear MA401RA (seems
to be much more reliable)
Mon Mar 1 11:00:00 2004 - meissnerAATTsuse.de
- fix for lib64 platforms.
Mon Mar 1 11:00:00 2004 - jgAATTsuse.de
- update linux-wlan-ng to 0.2.1pre20:
- limited support for wireless extensions
- some driver fixes
- rewrote driver makefiles for linux-wlan-ng
- building lwepgen and keygen again (nwepgen is not very useful
for 104 bit keys)
- fixed linux-wlan-ng mkversionh script
- added acx100 driver (for Texas Instruments ACX1xx chipsets)
- update to latest prism54 cvs snapshot
- various makefile fixes
- disabled madwifi driver (crashes on init)
Mon Feb 9 11:00:00 2004 - jgAATTsuse.de
- update linux-wlan-ng to 0.2.1pre17:
- x86-64 support
- basic ethtool support
- support for Netgear MA311 PCI card
- some fixes/cleanup (see CHANGES file)
- building tools from linux-wlan-ng also for non-x86
(they are needed even so the drivers are not available)
- not building lwepgen and keygen anymore (nwepgen does
the job already)
- using /lib/modules/`uname -r`/lib instead of /usr/src/linux
for accessing kernel source in linux-wlan-ng
Thu Feb 5 11:00:00 2004 - roAATTsuse.de
- fix filelist for non-x86
Mon Feb 2 11:00:00 2004 - jgAATTsuse.de
- update wireless-tools to version 27.pre9, changes:
o Trivial cleanups and docs updates
o Implement \"iwconfig XXX txpower on\" and fix \"fixed\" [iwconfig]
o Always properly initialise sanlen before recvfrom() [iwevent]
o Zero buffer so we don\'t print garbage after essid [iwgetid]
o Document that 00:00:00:00:00:00 == no association [iwconfig.8]
(From Guus Sliepen )
o Fix doc typo : ad_hoc => ad-hoc [wireless.7/DISTRIBUTIONS.txt]
- some specfile cleanups
- added /sbin binaries to filelist
Thu Jan 29 11:00:00 2004 - jgAATTsuse.de
- removed linux-wlan-ng and madwifi directories from km_wlan
filelist for ppc
Mon Jan 26 11:00:00 2004 - jgAATTsuse.de
- removed dependency on kernel-source
Fri Jan 23 11:00:00 2004 - jgAATTsuse.de
- changed kernel-source-26 to kernel-source in neededforbuild
(left over from test build)
Fri Jan 23 11:00:00 2004 - jgAATTsuse.de
- build linux-wlan-ng only on ix86
- ported linux-wlan-ng to new pcmcia cardservices interface
(needed for kernel 2.6)
- removed accidentally readded depmod command
- changed interface name of prism54 driver to wlanX
Wed Jan 21 11:00:00 2004 - jgAATTsuse.de
- removed unneeded k_deftl from neededforbuild
- added prism54 driver
- more preparations for kernel 2.6
Thu Jan 8 11:00:00 2004 - jgAATTsuse.de
- updated wireless-tools to version 27pre7 (minor fixes,
also for bug #33112)
- updated madwifi to latest cvs
- removed atmel drivers (may get added again later)
- package km_wlan should be ready for kernel 2.6
Wed Oct 15 12:00:00 2003 - jgAATTsuse.de
- updated madwifi to latest cvs version (fixes 802.11b mode
support)
Fri Sep 12 12:00:00 2003 - roAATTsuse.de
- configure kernel-source if needed
Mon Sep 8 12:00:00 2003 - agruenAATTsuse.de
- km_wlan-HZ.diff: Adapt to dynamic-hz kernel patch.
Fri Aug 22 12:00:00 2003 - jgAATTsuse.de
- updated madwifi to latest cvs version (should fix some
transmit timeout errors)
- merged patches wireless_tools.26.dif and wireless_tools-wext.dif
Mon Aug 18 12:00:00 2003 - jgAATTsuse.de
- added genwepkey utility to generate 128bit WEP keys
Thu Aug 14 12:00:00 2003 - jgAATTsuse.de
- updated madwifi to latest cvs version (fixes possible kernel
crash on module loading)
Mon Aug 11 12:00:00 2003 - jgAATTsuse.de
- updated madwifi to version 20030802
Fri Jul 25 12:00:00 2003 - jgAATTsuse.de
- removing object files before packaging km_wlan so no
unneccesary dependencies get created
Thu Jul 24 12:00:00 2003 - jgAATTsuse.de
- removed \'depmod\' call from madwifi Makefile
- merged km_atmel and km_madwifi to km_wlan
Wed Jul 16 12:00:00 2003 - jgAATTsuse.de
- update wireless tools to version 26
- update atmelwlandriver to version 2.1.2.2
- update at76c503 to version 0.10
- added madwifi driver (version 20030702)
- added /etc/pcmcia/atmel.conf to filelist
Tue Jun 17 12:00:00 2003 - roAATTsuse.de
- added directory to filelist
Tue Jun 3 12:00:00 2003 - jgAATTsuse.de
- update atmelwlandriver to version 20030602
- update at76c503 driver to version 0.9
Tue May 27 12:00:00 2003 - roAATTsuse.de
- add wireless.7 to filelist
Wed Feb 26 11:00:00 2003 - jgAATTsuse.de
- compiling against kernel source now which prevents a wireless
extension version mismatch
- changed group of km_atmel to Development/Sources (seems to
be more common)
Mon Feb 24 11:00:00 2003 - jgAATTsuse.de
- added lvnet from the atmelwlandriver package
- added wlan driver packages atmelwlandriver and at76c503 as
subpackage km_atmel
Fri Jan 10 11:00:00 2003 - jgAATTsuse.de
- update to version 25 (lots of changes, see CHANGELOG.h)
Fri Jun 21 12:00:00 2002 - roAATTsuse.de
- use -fPIC to build shared lib
Mon Feb 11 11:00:00 2002 - grimmerAATTsuse.de
- update to version 23
* Split iw_check_addr_type() into two functions mac/if [iwlib]
* iw_in_addr() does appropriate iw_check_xxx itself [iwlib]
* Allow iwspy on MAC address even if IP doesn\'t check [iwspy]
* Allow iwconfig ap on MAC address even if IP doesn\'t check [iwconfig]
* Fix iwlist man page about extra commands [iwlist]
* Fix Makefile rules for library compile (more generic) [Makefile]
* Set max length for all GET request with a iw_point [various]
* Fix set IW_PRIV_TYPE_BYTE to be endian/align clean [iwpriv]
* Add \'/\' at the end of directories to create them [Makefile]
* Replace \"cp\" with \"install\" to get permissions proper [Makefile]
* Install Man-Pages at the proper location [Makefile]
* Add automatic header selection based on libc/kernel [iwlib.h]
* Add \"commit\" to force parameters on the card [iwconfig]
* Wrap ioctl() in iw_set/get_ext() wrappers [all]
* Beautify set request error messages [iwconfig]
- re-diffed patch
- added INSTALL to docu files
Tue Dec 11 11:00:00 2001 - bjackeAATTsuse.de
- add manpages and %clean
Mon Dec 10 11:00:00 2001 - bjackeAATTsuse.de
- move progs from bin to sbin
- add missing iwlist and iwgetid
- mark documentation as %doc
- update to 22
- add include and library files
Tue Aug 21 12:00:00 2001 - zozAATTsuse.de
- update to version 21
* Improved power management support
* Transmit Power parameter
* Better Makefile, header options can be set there
* Support for GLibc2.2
* Check Wireless Extension version mismatch
* Retry settings
* Split iwspy into iwspy and iwlist
Fri Feb 9 11:00:00 2001 - roAATTsuse.de
- fixed to compile
Sun Dec 3 11:00:00 2000 - zozAATTsuse.de
- initial package
- xwireless omitted
