Changelog for python-paramiko-doc-2.4.0-1.1.noarch.rpm :
Thu Nov 16 13:00:00 2017 mimi.vxAATTgmail.com
- update to 2.4.0
+ new pytest based testsuite

* dd a new passphrase kwarg to SSHClient.connect so users may disambiguate
key-decryption passphrases from password-auth passwords.

* Drop Python 2.6 and Python 3.3 support

Thu Oct 5 14:00:00 2017 mimi.vxAATTgmail.com
- update to 2.3.1
+ cert_support.tar.gz - missing test certificates for testsuite

* Certificate support broke the no-certificate case for Ed25519 keys
(symptom is an AttributeError about public_blob.) This went uncaught
due to cert autoload behavior (i.e. our test suite never actually ran
the no-cert case, because the cert existed!) Both issues have been fixed.

* Implement basic client-side certificate authentication
(as per the OpenSSH vendor extension.)

* Added pre-authentication banner support for the server interface
(ServerInterface.get_banner plus related support in Transport/AuthHandler.)

* Update Ed25519Key so its constructor offers the same file_obj parameter
as its sibling key classes.

* Add a gss_trust_dns option to Client and Transport to allow explicitly
setting whether or not DNS canonicalization should occur when using GSSAPI.

* Paramiko originally defaulted to zlib compression level 9
(when one connects with compression=True; it defaults to off.) This has been
found to be quite wasteful and tends to cause much longer transfers in most
cases, than is necessar

* Enhance documentation around the new SFTP.posix_rename method
so it’s referenced in the ‘standard’ rename method for increased visibility.

* Modify logic around explicit disconnect messages, and unknown-channel situations,
so that they rely on centralized shutdown code instead of running their own.
This is at worst removing some unnecessary code, and may help with some
situations where Paramiko hangs at the end of a session.

* Display exception type and message when logging auth-rejection messages
(ones reading Auth rejected: unsupported or mangled public key); previously
this error case had a bare except and did not display exactly why the key
failed.

* Ed25519 keys never got proper API documentation support; this has been fixed.

* Update how we use Cryptography‘s signature/verification methods
so we aren’t relying on a deprecated API.

Thu Oct 5 14:00:00 2017 mimi.vxAATTgmail.com
- update to 2.2.2:

* SSHClient now requests the type of host key it has (e.g. from known_hosts)
and does not consider a different type to be a “Missing” host key.
This fixes a common case where an ECDSA key is in known_hosts and the server
also has an RSA host key.

* Fix up host-key checking in our GSSAPI support, which was previously
using an incorrect API call

* Fix key exchange (kex) algorithm list for GSSAPI authentication;
reviously, the list used solely out-of-date algorithms, and now contains
newer ones listed preferentially before the old

* Clean up GSSAPI authentication procedures so they do not prevent normal
fallback to other authentication methods on failure.

* Add rekeying support to GSSAPI connections, which was erroneously missing.

Thu Aug 10 14:00:00 2017 tbechtoldAATTsuse.com
- update to 2.2.1:

* Missed a spot

* Update .travis.yml

* Whitespace

* Having this in a mini-toctree made the nav look funny and is also just unintuitive

* Changelog re #471, re #65

* these are bytes

* changelog: update for #990 and #993

* ecdh kex support

* flake8/whitespace

* Trailing comma

* Add test for posix-renameAATTopenssh.com extension for SFTP client

* Changelog re #921

* Add a note about new Python-level deps to changelog re: Ed25519 support

* Add method for \"posix-renameAATTopenssh.com\" extension for SFTP client.

* Add IOError in posix-renameAATTopenssh.com test for python 2 support.

* this isnt bytes

* Added a auth_timeout to handle situations where SSH server stops responding during auth.

* small cleanups

* More changelog flimflammery

* Added changelog entry

* python 3 compatibility

* Incorrect comparison, should be <=

* DDD re #857

* Improve __hash__ functions

* Hrm that should always have been an h1

* No idea how this got past all the earlier flake8 work...

* comments

* Fixed test to support python 2.6

* Note ecdh-sha2 preferred-kex placement in changelog entry for #951, re #983

* Changelog language tweaks

* Reorder cipher and key preferences to make more sense

* Added a test to check that the auth_timeout argument is passed through and applied.

* Changelog tweak

* Cut 2.2.1

* transport: change order of preferred kex and hmac algorithms

* need bcrypt >= 3.1.3 for kdf() ignore_few_rounds kwarg

* Changelog re #972, re #325, closes #325

* cleanup/simplify auth_timeout tests

* Missed a merge conflict lolol

* flake8

* Changelog re #951

* Perplexed at why flake8 did not report this earlier

* Add Python 3.6 to classifiers

* Add support for posix-renameAATTopenssh.com for the SFTP server side and fix tests accordingly.

* sphinx nitpick fixes

* Fixed encoding/decoding of the public key on the wire

* Added test for authentication timeout from a non-responsive server

* refactor files

* fixed comment + consistency

* Changelog re #857

* Cut 2.2.0

* integration test, with ourselves

* TODO

* That was easy. Closes #857

* Add sanity note to changelog re #869

* Unit tests

* Fixes #325 -- add support for Ed25519 keys

* Happy New Year

* implement __hash__() method for Ed25519Key

* pep8

* Increased auth_timeout to 30 seconds

* py3k

* fixed long line

* Link to the spec

* set a minimum version

* Support decrypting keys

* Failing test proving need for #857
- move demos/ to extra -doc package

Sun Jun 11 14:00:00 2017 mimi.vxAATTgmail.com
- update to 2.1.3

* Make util.log_to_file append instead of replace.

* SSHClient and Transport could cause a memory leak if there’s a connection
problem or protocol error, even if Transport.close() is called.

* Prior support for ecdsa-sha2-nistp(384|521) algorithms didn’t fully extend
to covering host keys, preventing connection to hosts which only offer
these key types and no others. This is now fixed.

* Prefer newer ecdsa-sha2-nistp keys over RSA and DSA keys during host key
selection. This improves compatibility with OpenSSH, both in terms of general
behavior, and also re: ability to properly leverage OpenSSH-modified
known_hosts files.

* The RC4/arcfour family of ciphers has been broken since version 2.0; but since
the algorithm is now known to be completely insecure, we are opting
to remove support outright instead of fixing it.

* Move sha1 above the now-arguably-broken md5 in the list of preferred MAC
algorithms, as an incremental security improvement for users whose target
systems offer both.

* Writing encrypted/password-protected private key files was silently broken
since 2.0 due to an incorrect API call
Includes a directly related fix, namely adding the ability to read AES-256-CBC
ciphered private keys (which is now what we tend to write out as it is
Cryptography’s default private key cipher.)

* Allow any type implementing the buffer API to be used with BufferedFile,
Channel, and SFTPFile. This resolves a regression introduced in 1.13
with the Python 3 porting changes, when using types such as memoryview.

* Enhance default cipher preference order such that aes(192|256)-cbc are preferred
over blowfish-cbc.

* SSHClient now requests the type of host key it has (e.g. from known_hosts)
and does not consider a different type to be a “Missing” host key. This fixes
a common case where an ECDSA key is in known_hosts and the server also has
an RSA host key.

* Overhaul the codebase to be PEP-8

Wed Apr 19 14:00:00 2017 toddrme2178AATTgmail.com
- Implement single-spec version.

Fri Mar 17 13:00:00 2017 rjschweiAATTsuse.com
- Fix version setting for cryptography for build

Thu Mar 16 13:00:00 2017 rjschweiAATTsuse.com
- Add python-pyasn1 as Buildrequires for testing

Fri Feb 24 13:00:00 2017 mimi.vxAATTgmail.com
- update to 2.1.2

* Fix a bug in server-mode concerning multiple interactive auth steps

* SSHClient now gives its internal Transport a handle on itself, preventing
garbage collection of the client until the session is closed. Without this,
some code which returns stream or transport objects without the client that
generated them, would result in premature session closure
when the client was GCd

* Avoid test suite exceptions on platforms lacking errno.ETIME

* weak how RSAKey.__str__ behaves so it doesn’t cause TypeError under Python 3.

Tue Dec 13 13:00:00 2016 mimi.vxAATTgmail.com
- update to 2.1.1

* A tweak to the original patch implementing gh#398 was not fully applied,
causing calls to ~paramiko.client.SSHClient.invoke_shell to fail with
AttributeError. This has been fixed.

* Fix the implementation of PKey.write_private_key_file (this method is only
publicly defined on subclasses; the fix was in the private real
implementation) so it passes the correct params to open()

* Add an optional timeout parameter to Transport.start_clienti
(and feed it the value of the
configured connection timeout when used within SSHClient
.)

* Catch AssertionError thrown by Cryptography when attempting to load bad
ECDSA keys, turning it into an SSHException.

* Add a missing .closed attribute (plus ._closed because reasons) to
ProxyCommand

* Make the subprocess import in proxy.py lazy so users on platforms without
it (such as Google App Engine) can import Paramiko successfully

* Fix incorrect docstring/param-list for Transport.auth_gssapi_keyex
so it matches
the real signature.

* Add an environment dict argument to Client.exec_command

Fri Oct 7 14:00:00 2016 tbechtoldAATTsuse.com
- Fix Requires for python-cryptography
- Add missing Requires for python-pyasn1

Sun Jul 31 14:00:00 2016 michaelAATTstroeder.com
- update to 2.0.2

* [Bug] #758: Apply type definitions to _winapi module from
jaraco.windows 3.6.1. This should address issues on Windows platforms
that often result in errors like ArgumentError: [...] int too long to
convert. Thanks to AATTswohlerLL for the report and Jason R. Coombs for the
patch.

* [Bug] #774: Add a _closed private attribute to Channel objects so that
they continue functioning when used as proxy sockets under Python 3 (e.g.
as direct-tcpip gateways for other Paramiko connections.)

* [Bug] #673: (via #681) Fix protocol banner read errors (SSHException)
which would occasionally pop up when using ProxyCommand gatewaying.
Thanks to AATTDepado for the initial report and Paul Kapp for the fix.

Sat Jul 23 14:00:00 2016 michaelAATTstroeder.com
- updated homepage URL
- update to 2.0.1:

* [Bug] #537: Fix a bug in BufferedPipe.set_event which could cause
deadlocks/hangs when one uses select.select against Channel objects (or
otherwise calls Channel.fileno after the channel has closed).

* [Bug] #520: (Partial fix) Fix at least one instance of race condition
driven threading hangs at end of the Python interpreter session.
(Includes a docs update as well - always make sure to .close() your
clients!)

Fri Jul 8 14:00:00 2016 dmuellerAATTsuse.com
- fix build

Mon Jun 6 14:00:00 2016 dmuellerAATTsuse.com
- fix source url

Sun May 8 14:00:00 2016 hpjAATTurpla.net
- update to 2.0.0:

* Add support for 384- and 512-bit elliptic curve groups in ECDSA
key types (aka ecdsa-sha2-nistp384 / ecdsa-sha2-nistp521).

* Due to an earlier bugfix, less-specific Host blocks\' ProxyCommand
values were overriding ProxyCommand none in more-specific Host
blocks. This has been fixed in a backwards compatible manner (i.e.
ProxyCommand none continues to appear as a total lack of any
proxycommand key in parsed config structures).

* Fix a backwards incompatibility issue that cropped up in
SFTPFile.prefetch <~paramiko.sftp_file.prefetch> re: the
erroneously non-optional file_size parameter. Should only affect
users who manually call prefetch.

* Replace PyCrypto with the Python Cryptographic Authority (PyCA)
\'Cryptography\' library suite. This improves security,
installability, and performance; adds PyPy support; and much more.

* Fix stalled/hung SFTP downloads by cleaning up some threading lock
issues.

* Fix a Python 3 compatibility issue when handling two-factor
authentication.

* Clean up setup.py to always use setuptools, not doing so was a
historical artifact from bygone days.

* Update the module in charge of handling SSH moduli so it\'s
consistent with OpenSSH behavior re: prime number selection.

* Fix up ~paramiko.ssh_exception.NoValidConnectionsError so it
pickles correctly, and fix a related Python 3 compatibility issue.

* Update to jaraco.windows 3.4.1 to fix some errors related to
ctypes on Windows platforms.

* Annotate some public attributes on ~paramiko.channel.Channel such
as .closed.

* Fix logic bug in the SFTP client\'s callback-calling functionality;
previously there was a chance the given callback would fire twice
at the end of a transfer.

* Identify & work around a race condition in the test for handshake
timeouts, which was causing frequent test failures for a subset of
contributors as well as Travis-CI (usually, but not always,
limited to Python 3.5).

* Remove whitespace in our setup.py\'s install_requires as it
triggers occasional bugs in some versions of setuptools.

* Strip trailing/leading whitespace from lines when parsing SSH
config files - this brings things in line with OpenSSH behavior.

* Fix behavior of gssapi-with-mic auth requests so they fail
gracefully (allowing followup via other auth methods) instead of
raising an exception.

* Add missing file-like object methods for ~paramiko.file.BufferedFile
and ~paramiko.sftp_file.SFTPFile.

* Clean up and enhance the README (and rename it to README.rst from
just README).

Mon Feb 1 13:00:00 2016 toddrme2178AATTgmail.com
- Add --no-transport to fix a known issue with the tests
https://github.com/paramiko/paramiko/issues/574
Check if still failing on next release.
The tests is currently failing on Python 3.5, but it is not
actually Python 3.5 specific, it is just more likely to be
encountered on Python 3.5
- update to version 1.16.0:

* Streamline use of stat when downloading SFTP files via
SFTPClient.get ; this avoids
triggering bugs in some off-spec SFTP servers such as IBM
Sterling. Thanks to AATTmuraleee for the initial report and to Torkil
Gustavsen for the patch.

* Fully enable two-factor authentication (e.g. when a server
requires AuthenticationMethods
pubkey,keyboard-interactive). Thanks to AATTperryjrandall for the
patch and to AATTnevins-b and Matt Robenolt for additional support.

* Fix \'exec\' requests in server mode to use get_string instead of
get_text to avoid UnicodeDecodeError on non-UTF-8 input. Thanks to
Anselm Kruis for the patch & discussion.

* Fix line number reporting in log output regarding invalid
known_hosts line entries. Thanks to Dylan Thacker-Smith for catch
& patch.

* Update the vendored Windows API addon to a more recent
edition. Also fixes :issue:`193`, :issue:`488`,
:issue:`498`. Thanks to Jason Coombs.

Thu Feb 26 13:00:00 2015 tbechtoldAATTsuse.com
- update to version 1.15.2 (bsc#962291)

* [Bug] #320: Update our win_pageant module to be Python 3 compatible

* [Bug] #429: Server-level debug message logging was overlooked during the
Python 3 compatibility update; Python 3 clients attempting to log SSH
debug packets encountered type errors. This is now fixed

* [Bug] #459: Tighten up agent connection closure behavior to avoid
spurious ResourceWarning display in some situations

* [Bug] #266: Change numbering of Transport channels to start at 0
instead of 1 for better compatibility with OpenSSH & certain server
implementations which break on 1-indexed channels

* [Support] #419: Modernize a bunch of the codebase internals to
leverage decorators. Props to AATTbeckjake for realizing we’re no longer
on Python 2.2 :D

* [Support] #421: Modernize threading calls to user newer API

* [Support] #422: Clean up some unused imports

* [Support] #431: Replace handrolled ssh_config parsing code with
use of the shlex module

* [Bug] #415: Fix ssh_config parsing to correctly interpret ProxyCommand
none as the lack of a proxy command, instead of as a literal command
string of \"none\"

* [Bug] #428: Fix an issue in BufferedFile (primarily used in the SFTP
modules) concerning incorrect behavior by readlines on files whose
size exceeds the buffer size

* [Bug] #455: Tweak packet size handling to conform better to the
OpenSSH RFCs; this helps address issues with interactive program cursors

* [Bug] #413: (also #414, #420, #454) Be significantly smarter about polling
& timing behavior when running proxy commands, to avoid unnecessary
(often 100%!) CPU usage

Thu Oct 2 14:00:00 2014 andreaAATTopensuse.org
- new upsteam version 1.15.1

* fixed from previous version: Bug] #399: SSH agent forwarding
would hang due to incorrect values passed into the new window
size arguments for Transport

* detailed changelog available on pramiko website:
http://paramiko-www.readthedocs.org/en/latest/changelog.html

Sat May 31 14:00:00 2014 dmuellerAATTsuse.com
- update to 1.13.1:

* :support:`256 backported` Convert API documentation to Sphinx, yielding a new
API docs website to replace the old Epydoc one.

* :bug:`-` Use constant-time hash comparison operations where possible, to
protect against `timing-based attacks
`_. Thanks to Alex Gaynor
for the patch.

* :feature:`58` Allow client code to access the stored SSH server banner via
`Transport.get_banner `. Thanks to
``AATTJhoanor`` for the patch.

* :bug:`252` (`Fabric #1020 `_)
Enhanced the implementation of ``ProxyCommand`` to avoid a deadlock/hang
condition that frequently occurs at ``Transport`` shutdown time. Thanks to
Mateusz Kobos, Matthijs van der Vleuten and Guillaume Zitta for the original
reports and to Marius Gedminas for helping test nontrivial use cases.

* :bug:`268` Fix some missed renames of ``ProxyCommand`` related error classes.
Thanks to Marius Gedminas for catch & patch.

* :bug:`34` (PR :issue:`35`) Fix SFTP prefetching incompatibility with some
SFTP servers regarding request/response ordering. Thanks to Richard
Kettlewell.

* :bug:`193` (and its attentant PRs :issue:`230` & :issue:`253`) Fix SSH agent
problems present on Windows. Thanks to David Hobbs for initial report and to
Aarni Koskela & Olle Lundberg for the patches.

* :bug:`225 (1.12+)` Note ecdsa requirement in README. Thanks to Amaury
Rodriguez for the catch.

* :bug:`176` Fix AttributeError bugs in known_hosts file (re)loading. Thanks
to Nathan Scowcroft for the patch & Martin Blumenstingl for the initial test
case.

Fri Apr 18 14:00:00 2014 rschweikertAATTsuse.com
- include in SLE 12 (FATE #315990)

Mon Nov 25 13:00:00 2013 p.drouandAATTgmail.com
- Update to version 1.12

* #152: Add tentative support for ECDSA keys.
*This adds the ecdsa
module as a new dependency of Paramiko.
* The module is available at
[warner/python-ecdsa on Github](https://github.com/warner/python-ecdsa) and
[ecdsa on PyPI](https://pypi.python.org/pypi/ecdsa).

* Note that you might still run into problems with key negotiation --
Paramiko picks the first key that the server offers, which might not be
what you have in your known_hosts file.

* Mega thanks to Ethan Glasser-Camp for the patch.

* #136: Add server-side support for the SSH protocol\'s \'env\' command
- Use local source instead of service
- Add python-ecdsa requirement; new dependency

Sun Oct 27 13:00:00 2013 lukasAATTwunner.de
- update to 1.11.2:

* #156: Fix potential deadlock condition when using Channel objects as
sockets (e.g. when using SSH gatewaying). Thanks to Steven Noonan and
Frank Arnold for catch & patch.

* #179: Fix a missing variable causing errors when an ssh_config file
has a non-default AddressFamily set. Thanks to Ed Marshall & Tomaz
Muraus for catch & patch.

* #200: Fix an exception-causing typo in `demo_simple.py`. Thanks to
Alex Buchanan for catch & Dave Foster for patch.

* #199: Typo fix in the license header cross-project. Thanks to Armin
Ronacher for catch & patch.

* #162: Clean up HMAC module import to avoid deadlocks in certain uses
of SSHClient. Thanks to Gernot Hillier for the catch & suggested fix.

* #36: Fix the port-forwarding demo to avoid file descriptor errors.
Thanks to Jonathan Halcrow for catch & patch.

* #168: Update config handling to properly handle multiple \'localforward\'
and \'remoteforward\' keys. Thanks to Emre Yilmaz for the patch.

Tue Sep 3 14:00:00 2013 dmuellerAATTsuse.com
- update to 1.11.0:

* #98: On Windows, when interacting with the PuTTY PAgeant, Paramiko now
creates the shared memory map with explicit Security Attributes of the user,
which is the same technique employed by the canonical PuTTY library to avoid
permissions issues when Paramiko is running under a different UAC context
than the PuTTY Ageant process. Thanks to Jason R. Coombs for the patch.

* #100: Remove use of PyWin32 in `win_pageant` module. Module was already
dependent on ctypes for constructing appropriate structures and had ctypes
implementations of all functionality. Thanks to Jason R. Coombs for the
patch.

* #87: Ensure updates to `known_hosts` files account for any updates to said
files after Paramiko initially read them. (Includes related fix to guard
against duplicate entries during subsequent `known_hosts` loads.) Thanks to
`AATTsunweaver` for the contribution.

Mon Apr 29 14:00:00 2013 dmuellerAATTsuse.com
- update to 1.10.1:

* SFTP put of empty file will still return the attributes
of the put file. Thanks to Jason R. Coombs for the patch.

* Forwarded SSH agent connections left stale local pipes
lying around, which could cause local (and sometimes remote or network
resource starvation when running many agent-using remote commands. Thanks to

* Batch SFTP writes to help speed up file transfers

* Fix handling of window-change events to be on-spec

* Overhaul SSH config parsing to be in line with `man ssh_config`

* Forego random padding for packets when running under `
*-ctr` ciphers

* Add `SFTPClient.putfo` and `.getfo` methods to allow direct
uploading/downloading of file-like objects

* Add `timeout` parameter to `SSHClient.exec_command` for easier setting
of the command\'s internal channel object\'s timeout

* Expose the internal \"is closed\" property of the file transfer class
BufferedFile` as `.closed`, better conforming to Python\'s file interface

Sat Dec 1 13:00:00 2012 saschpeAATTsuse.de
- Update to version 1.9.0:
+ #97 (with a little #93): Improve config parsing of ProxyCommand directives
and provide a wrapper class to allow subprocess-driven proxy commands to be
used as sock= arguments for SSHClient.connect.
+ #77: Allow SSHClient.connect() to take an explicit sock parameter
overriding creation of an internal, implicit socket object.
- Changes from version 1.8.1:
+ #90: Ensure that callbacks handed to SFTPClient.get() always fire at least
once, even for zero-length files downloaded. Thanks to Github user AATTenB for
the catch.
+ #85: Paramiko\'s test suite overrides
unittest.TestCase.assertTrue/assertFalse to provide these modern assertions
to Python 2.2/2.3, which lacked them. However on newer Pythons such as 2.7,
this now causes deprecation warnings. The overrides have been patched to only
execute when necessary. Thanks to AATTArfrever for catch & patch.
- Changes from version 1.8.0:
+ #17 (\'ssh\' 28): Fix spurious NoneType has no attribute \'error\' and similar
exceptions that crop up on interpreter exit.
+ \'ssh\' 32: Raise a more useful error explaining which known_hosts key line was
problematic, when encountering binascii issues decoding known host keys.
Thanks to AATTthomasvs for catch & patch.
+ \'ssh\' 33: Bring ssh_config parsing more in line with OpenSSH spec, re: order of
setting overrides by Host specifiers. Specifically, the overrides now go by
file order instead of automatically sorting by Host value length. In
addition, the first value found per config key (e.g. Port, User etc)
wins, instead of the last. Thanks to Jan Brauer for the contribution.
+ \'ssh\' 36: Support new server two-factor authentication option
(RequiredAuthentications2), at least re: combining key-based & password
auth. Thanks to Github user bninja.
+ \'ssh\' 11: When raising an exception for hosts not listed in
known_hosts (when RejectPolicy is in effect) the exception message was
confusing/vague. This has been improved somewhat. Thanks to Cal Leeming for
highlighting the issue.
+ \'ssh\' 40: Fixed up & expanded EINTR signal handling. Thanks to Douglas Turk.
+ \'ssh\' 15: Implemented parameter substitution in SSHConfig, matching the
implementation of ssh_config(5). Thanks to Olle Lundberg for the patch.
+ \'ssh\' 24: Switch some internal type checking to use isinstance to help prevent
problems with client libraries using subclasses of builtin types. Thanks to
Alex Morega for the patch.
+ Fabric #562: Agent forwarding would error out (with Authentication response
too long) or freeze, when more than one remote connection to the local agent
was active at the same time. This has been fixed. Thanks to Steven McDonald
for assisting in troubleshooting/patching, and to GitHub user AATTlynxis for
providing the final version of the patch.
+ \'ssh\' 5: Moved a fcntl import closer to where it\'s used to help avoid
ImportError problems on Windows platforms. Thanks to Jason Coombs for the
catch + suggested fix.
+ \'ssh\' 4: Updated implementation of WinPageant integration to work on 64-bit
Windows. Thanks again to Jason Coombs for the patch.
+ Added an IO loop sleep() call to avoid needless CPU usage when agent
forwarding is in use.
+ Handful of internal tweaks to version number storage.
+ Updated setup.py with ==dev install URL for pip users.
+ Updated setup.py to account for packaging problems in PyCrypto 2.4.0
+ Added an extra atfork() call to help prevent spurious RNG errors when
running under high parallel (multiprocess) load.
+ Merge PR #28: https://github.com/paramiko/paramiko/pull/28 which adds a
ssh-keygen like demo module. (Sofian Brabez)

Sun Jun 24 14:00:00 2012 os-devAATTjacraig.com
- Update to 1.7.7.2:

* Merge pull request #63: https://github.com/paramiko/paramiko/pull/63 which
fixes exceptions that occur when re-keying over fast connections.
- Add unit tests to build

Mon Mar 12 13:00:00 2012 saschpeAATTgmx.de
- Simplified macro usage

Tue Sep 20 14:00:00 2011 saschpeAATTsuse.de
- Update to version 0.7.7:

* Various bug fixes (upstream provides no further changes)

Tue Oct 5 14:00:00 2010 nixAATTopensuse.org
- Require newer python-crypto

Thu Sep 16 14:00:00 2010 cooloAATTnovell.com
- updte to 1.7.6 \"Fanny\"
various bug fixes, \"Ernest\" brought ARC4 & CTR support and IP6 support