Changelog for
raspberrypi-firmware-extra-2019.01.22-36.1.noarch.rpm :
Thu Jan 31 13:00:00 2019 guillaume.gardetAATTopensuse.org
- Update to 81cca1a (2019-01-22):
* firmware: Added ability to have an third transpose buffer
See: #837
* firmware: isp: Correct the conversion tables changed in adding the gamma block
See: #1084
* firmware: raspberrypi_full variant: Drop unused Camplus sw stages
* bootcode: Reset WiFi and BT devices before resetting the expander
See: #1088
* bootcode: Fix Ethernet boot on a different subnet
See: #1078
* firmware: interface: Drop vcfiled
See: raspberrypi/userland#525
* firmware: Add reference counting to the local audio players
See: #547
* firmware: arm_loader: Add reporting the firmware git hash via the mailbox
* firmware: vcos: Add reporting of which variant was built
See: raspberrypi/linux#2806
* firmware: Update vcdbg help
See: #594
Tue Jan 8 13:00:00 2019 guillaume.gardetAATTopensuse.org
- Update to e1bd9b0 (2018-12-21):
* firmware: Added a mailbox function for setting gamma
* firmware: bootcode: Support parsing of gpio filters from config.txt
See: #1076
* firmware: video_encode: Allow Inline Headers to be changed whilst active
* firmware: IL: Add XRGB8888 and XBGR8888, and support on video_render, isp, and hvs
* firmware: image_encode: Allow arbitrary buffer strides matching the appropriate multiples
* firmware: platform: Use 3aplus dt-blob section and bcm2710-rpi-3-a-plus.dtb
* firmware: dispmanx: Also apply overscan_scale when clamping to screen
See: https://forum.kodi.tv/showthread.php?tid=338052
* firmware: arm_dt: Accept \"csi\" as a special DT node that masks IRQs
* firmware: MMAL: Include OPAQUE in the list of supported encodings where appropriate
See: https://www.raspberrypi.org/forums/viewtopic.php?f=67&t=226416
* firmware: video_render: asserting on the buffer being unlocked is invalid
* firmware: video_render: Further fix to a vcos_verify
* firmware: IL hvs: Fail component create if the HVS or TXP interrupts are masked
* firmware: Clean up masked interrupt handling - moves it to intctrl
* firmware: vcinclude: Clean up INTERRUPT_xxx defines to use one place
* firmware: vcfw: camera_subsystem: Stop cameras being detected if ARM has Unicam instance
* firmware: vc_image: Fix up vc_image_bits_per_pixel for YUYV variants and BGR888
* firmware: vc_image: Make the alternate path in yuv420 to rgb888 support bgr888
* firmware: vc_image: Add an rgb_stripe_swap_ext which takes pitches
* firmware: vc_image_convert: yuv420 to bgr888 failed on (width&31) != 0
* firmware: IL isp: Use gamma block to shift 10bpp YUV to the correct pipe depth
* firmware: video_encode: Always set the input port nBufferSize to match the image
* firmware: Camera/ISP: Allow option to disable demosaicing
Fri Nov 30 13:00:00 2018 nsaenzjulienneAATTsuse.com
- Removed upstream-mmc and rpi3-hdmi overlays as not needed anymore
- Added Conflicts statement to avoid issues with older kernels
Tue Nov 20 13:00:00 2018 guillaume.gardetAATTopensuse.org
- Update to 55e591283 (2018-11-05):
* firmware: Move to driver based backlight
See: #1063
* bootcode: Extend TEST_UNIT_READY timeout to 20 seconds,
some hard drives take a really long time
See: #898
* firmware: video_render: Treat an empty buffer with ENDOFFRAME set as
a flush
* firmware: dispmanx: Add option to ignore all layers lower than the
current layer
Wed Oct 17 14:00:00 2018 guillaume.gardetAATTopensuse.org
- Update to 10c1c5f96 (2018-10-15):
* firmware: jpeg/mjpeg: MJPEG doesn\'t insert JFIF APP0 header
See: https://github.com/raspberrypi/userland/issues/345
* firmware: Add IL HVS component
* firmware: mmal: Acquire zero copy buffers on being passed to the VPU
* firmware: video_render: Use per pixel alpha on RGBA and BGRA
* firmware: video_render: Add support for alpha options (MIX and PREMULT)
* firmware: video_encode: Use default values on invalid nStride or nSliceHeight
See: https://github.com/raspberrypi/firmware/issues/1051
* firmware: gpioman/FXL6408: Handle open failing sensibly
See: https://github.com/raspberrypi/firmware/issues/1053
* firmware: Delay backlight coming on
See: https://github.com/raspberrypi/firmware/issues/1052
* firmware: LCD driver close fixes
* 2ndstage: ignore autoboot.txt if boot partition is already set
See: https://github.com/raspberrypi/noobs/issues/508
* firmware: 2ndstage: Report IP address in ARP response in network order
* firmware: video_decode: Fix error in previous memory leak patch
* firmware: video_encode: Add ISP conversion support for RGBX32
* firmware: platform: Also report soft temperature limit in get_throttled bits
* firmware: IL isp: minor code cleanups
* firmware: image_encode: Support Video domain on input port
* firmware: Camplus: annotate: Check lines_available >= lines_required
See: https://github.com/raspberrypi/userland/issues/485
* firmware: arm_dt: Work around an absent cache-line-size
See: https://github.com/raspberrypi/linux/issues/2643
* firmware: rawcam: Fix double buffer return issue
* firmware: rawcam: Code cleanup
* firmware: host_apps: Fixup partially merged commit from userland
See: https://github.com/raspberrypi/firmware/issues/1027
* firmware: mmal: Add KEEP_PORT_FORMATS flag to mmal connection
See: https://github.com/raspberrypi/userland/pull/483
* firmware: RaspiStill: Apply gpsd info as EXIF tags
See: https://github.com/raspberrypi/userland/pull/286
* firmware: video_encode: Drop back to software conversion if stride is not mod32
See: https://github.com/Hexxeh/rpi-firmware/issues/182
* firmware: arm_dt: Break out GPIO save/restore from HAT code as needed for PoE
Thu Aug 16 14:00:00 2018 guillaume.gardetAATTopensuse.org
- Update to 953a3396 (2018-08-10):
* firmware: MMAL/IL: Fix for reducing alignment patch
See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=62364
* firmware: Added a dpi_timings config item
* firmware: Add DPI Driver default settings
* firmware: HVS channel should come from the DISPLAY_INFO
Wed Jul 11 14:00:00 2018 guillaume.gardetAATTopensuse.org
- Update to d3c3d031 (2018-07-09):
* firmware: pwm_sdm: fix an edge case when reading back DMA
source addresses
* firmware: pwm_sdm: fix write handle refcounting
* firmware: arm_loader: Update NOTIFY_REBOOT to reset the GPIO
expander
* firmware: Allow selection of DSI port for LCD
* firmware: dtoverlay: More \"reg\" and \"name\" support
* firmware: imx219: Updates for production test
* firmware: variant: Disable custom_preproc and focus_stats_preproc
camera stages
* firmware: bootcode: Force an I2C stop as a reset
* firmware: power: Ensure at least 2ms between writes to the PMIC regs
* firmware: power: Add 3ms threshold
* firmware: power: Reduce i2c speed of pmic to 100kHz
Thu Jun 7 14:00:00 2018 guillaume.gardetAATTopensuse.org
- Update to ab802d3 (2018-06-03):
* revert: sdram: Reduce address skew from -10 to -5
* sdram: Reduce address skew from -10 to -5
* platform: Avoid improving the schmoo on Pi3+
* platform: Latest AVS rules
* sdram: Increase read/write latency for higher sdram frequencies
* power: Add boot-time 3b+ PMIC register logging
* power: Continue to probe PMIC after error
* Match phy setup same as bootcode for device mode initialisation
* Add logging_messages to UART
* Fix 3B+ bootcode.bin only booting
* video_encode: Filter the list of encoders based on variant
* mmal: Relax requirement on a buffer in mmal_port_send_buffer
* platform: avs: Also apply chicken bits to boost voltage
Thu May 24 14:00:00 2018 fvogtAATTsuse.com
- Allow u-boot to set arm_control to support 32-bit images on RPi3
Fri Apr 20 14:00:00 2018 guillaume.gardetAATTopensuse.org
- config: replace dtoverlay=vc4-kms-v3d and dtoverlay=dwc2 by
dtoverlay=upstream, this fix gfx for RPi1-256M version
Thu Apr 19 14:00:00 2018 guillaume.gardetAATTopensuse.org
- Update to a154f21 (2018-04-16):
* Partial revert for eemc clock change for slice
* config: Add gpio command
* hat_lib: Only probe HAT EEPROM if ID pins are inputs
* Added a arm_display_kick function
* Possible fix for HDMI audio pause
* arm_loader: Always set the turbo frequencies immediately
Thu Apr 5 14:00:00 2018 agrafAATTsuse.com
- Allow user defined config options (bsc#1088356)
- Move HDMI workaround to rpi3 section (fixes RPi2 HDMI output)
Wed Mar 14 13:00:00 2018 agrafAATTsuse.com
- Update to 3347884 (2018-03-13)
- Add support for new RPi3 B+ (bsc#1085262)
Mon Feb 19 13:00:00 2018 agrafAATTsuse.com
- Add overlays to match previous U-Boot provided DT
- Add Recommends: on dt and config packages
Fri Feb 16 13:00:00 2018 agrafAATTsuse.com
- Update to 445b6a8 (2018-02-09)
Wed Jan 31 13:00:00 2018 jengelhAATTinai.de
- Avoid bashisms in %post
Mon Jan 22 13:00:00 2018 agrafAATTsuse.com
- Merge config.txt files into a single config.txt with subsections
- Set GPU memory usage to 32MB, this is enough for vc4 (boo#1074566)
- Update to 050175d (2018-01-17)
Sat Nov 25 13:00:00 2017 afaerberAATTsuse.de
- Add rpi0w sub-package and config (boo#1069828). Derived from rpi3.
- Update to abfb4be3e1 (2017-11-17)
Thu Oct 12 14:00:00 2017 guillaumeAATTopensuse.org
- Update to a88e126a (2017-10-11)
Wed Aug 23 14:00:00 2017 guillaumeAATTopensuse.org
- Update to 8fe001e (2017-08-22)
Wed Apr 19 14:00:00 2017 afaerberAATTsuse.de
- Update to b038854 (2017-04-04)
Mon Feb 20 13:00:00 2017 malcolmlewisAATTopensuse.org
- Update to 2b495ac (2017-02-20)
Thu Jan 12 13:00:00 2017 guillaumeAATTopensuse.org
- Update to e44f66a (2017-01-10)
Fri Nov 18 13:00:00 2016 guillaumeAATTopensuse.org
- Update to 64996b0 (2016-11-16)
Tue Oct 25 14:00:00 2016 guillaumeAATTopensuse.org
- Update to 4a0e54e (2016-10-20)
Wed Oct 12 14:00:00 2016 guillaumeAATTopensuse.org
- Update to a021d6e (2016-10-11)
Tue Sep 27 14:00:00 2016 guillaumeAATTopensuse.org
- Increase from 64 MB to 96 MB of RAM for GPU for RPi with 256 or
512 MB of RAM to be able to decode a 1080p h264 video in kodi
Tue Sep 27 14:00:00 2016 guillaumeAATTopensuse.org
- Update to ad8608c (2016-09-21)
Thu Sep 15 14:00:00 2016 fvogtAATTsuse.com
- Use \"avoid_warnings=1\" in config-rpi{,2,3}.txt (bsc#998973)
Mon Sep 12 14:00:00 2016 afaerberAATTsuse.de
- Clean up config-{rpi2,rpi3}.txt, dropping rpi1 defaults
* On the rpi1 Model B rev. 2 performance results are similar
with and without defaults, so in doubt leave our settings in
config-rpi.txt until proven the defaults work better somewhere.
Tue Sep 6 14:00:00 2016 fvogtAATTsuse.com
- Use default frequencies in config-rpi{2,3}.txt (bsc#989511)
* Defaults work well on rpi2
* Allow much higher frequencies on rpi3
Fri Sep 2 14:00:00 2016 afaerberAATTsuse.de
- get-from-git.sh: Update for -config-rpi
* sub-packages
- Update to 334f548 (2016-09-02)
- Add post-install scripts to copy files to /boot/efi where needed.
/boot/vc may be the mountpoint for boot.scr based installations
or a symlink to /boot/efi. (bsc#996064)
Wed Aug 24 14:00:00 2016 mpluskalAATTsuse.com
- Update to d0bc6ce (2016.08.23)
Thu Jul 21 14:00:00 2016 mpluskalAATTsuse.com
- Update to 051aed7 (2016.07.15)
- Simplify spec file a bit
Thu Jun 16 14:00:00 2016 afaerberAATTsuse.de
- Fix last changelog entry
- Run format_spec_file in pre_checkin.sh to fix spec file header
- Restore silently dropped defattr that breaks older builds
Mon Jun 6 14:00:00 2016 dmuellerAATTsuse.com
- remove branding-openSUSE subpackage and split config
into the 3 variants for (rpi, rpi2, rpi3)
Tue May 31 14:00:00 2016 guillaumeAATTopensuse.org
- Update to ac0c0bf (2016-05-20)
Tue May 10 14:00:00 2016 dmuellerAATTsuse.com
- mark package as noarch (adds rpmlintrc)
- split extra bootloaders into separate -extra subpackage
Wed May 4 14:00:00 2016 afaerberAATTsuse.de
- Enable aarch64 builds for Raspberry Pi 3
Fri Apr 29 14:00:00 2016 guillaumeAATTopensuse.org
- Update to 20958cd (2016-04-27)
Wed Apr 6 14:00:00 2016 guillaumeAATTopensuse.org
- Update to c065500 (2016-04-05)
Mon Mar 7 13:00:00 2016 afaerberAATTsuse.de
- Revert to last actual change b48c36f (2016-03-04)
- Fix version bug found by Guillaume by using git-log (as intended)
Mon Mar 7 13:00:00 2016 guillaumeAATTopensuse.org
- Update to 845eb06 (2016-03-05)
Mon Mar 7 13:00:00 2016 guillaumeAATTopensuse.org
- Fix get-from-git.sh to get version even when packaged files are
not in the last commit
Tue Mar 1 13:00:00 2016 guillaumeAATTopensuse.org
- Update Config.txt (add GPU mem option for 1024 MB version)
Tue Mar 1 13:00:00 2016 guillaumeAATTopensuse.org
- Update to 9cd1c6c (2016-02-29)
Thu Feb 25 13:00:00 2016 guillaumeAATTopensuse.org
- Update to 565197e (2016-02-19)
Thu Feb 4 13:00:00 2016 guillaumeAATTopensuse.org
- Update to cb2ffaa (2016-02-01)
Thu Jan 14 13:00:00 2016 guillaumeAATTopensuse.org
- Update to 7147575 (2016-01-13)
Tue Dec 8 13:00:00 2015 afaerberAATTsuse.de
- Update to 224c756 (2015-12-08)
Tue Dec 8 13:00:00 2015 afaerberAATTsuse.de
- Move files from /boot to /boot/vc to allow directly updating the
FAT partition through a /boot/vc mount
- Require the main package for the branding package
Sun Nov 29 13:00:00 2015 afaerberAATTsuse.de
- Update to ed611df (2015-11-25)
* Clarifies licensing of start_
*.elf files
- Improve get-from-git.sh
* Automate file removal and addition
* Use date of last relevant change
- Add branding-openSUSE subpackage, based on a to-do item in
openSUSE:Factory:ARM JeOS package\'s uboot-image-install.in script
* Update comment about zImage to reflect current U-Boot situation
Wed Oct 28 13:00:00 2015 afaerberAATTsuse.de
- Add get-from-git.sh script as source file (sr#341314)
Mon Oct 26 13:00:00 2015 afaerberAATTsuse.de
- Update to 4047fe2 (2015-10-23)
- Throw out all non-free gfx sub-packages and files
Mon Oct 12 14:00:00 2015 guillaumeAATTopensuse.org
- Update to ba7a8fb (2015-10-11)
Mon Aug 17 14:00:00 2015 guillaumeAATTopensuse.org
- Update to e1e2823 (2015-08-15)
Fri Aug 14 14:00:00 2015 guillaumeAATTopensuse.org
- Update to c25cc51 (2015-08-13)
Mon Jul 20 14:00:00 2015 guillaumeAATTopensuse.org
- Update to cf20cb2 (2015-07-17)
Tue Jun 23 14:00:00 2015 guillaumeAATTopensuse.org
- Update to e8f6e12 (2015-06-22)
Thu Jun 4 14:00:00 2015 guillaumeAATTopensuse.org
- Update to 16044ee (2015-06-02)
Mon Feb 16 13:00:00 2015 guillaumeAATTopensuse.org
- Add %{_bindir}/raspividyuv
Mon Feb 16 13:00:00 2015 guillaumeAATTopensuse.org
- Update to 8aca576 (2015-02-14)
Tue Feb 10 13:00:00 2015 billAATTmerriam.net
- Update spec file to change ExclusiveArch to %arm to support the ARMv7 RPi
Wed Nov 5 13:00:00 2014 guillaumeAATTopensuse.org
- Update to 0080d30 (2014-11-04)
Thu Oct 16 14:00:00 2014 guillaumeAATTopensuse.org
- Update to e4afeda (2014-10-12)
Wed May 14 14:00:00 2014 bwiedemannAATTsuse.com
- Update to c0319ac (2014-05-13)
Wed Oct 30 13:00:00 2013 guillaumeAATTopensuse.org
- Add \"Provides: libEGL.so.1 libGLESv1_CM.so.1 libGLESv2.so.2\" to
fix libs deps
Tue Oct 29 13:00:00 2013 guillaumeAATTopensuse.org
- Fix Mesa conflicts for EGL, GLESv1 and GLESv2 libs
Tue Oct 29 13:00:00 2013 guillaumeAATTopensuse.org
- Update to 4c14569 (2013-10-18)
Mon Sep 9 14:00:00 2013 guillaume.gardetAATTopensuse.org
- Move bins and libs to standard path (/usr/
*) so remove /opt/vc/lib
from lib search path (keep symlinks in /opt/vc for compatibility
purpose)
Sun Sep 8 14:00:00 2013 seife+obsAATTb1-systems.com
- Update to f6bb324 (2013-09-07)
- add script to fetch tarball from git
- add /opt/vc/lib to library search path so that demo apps in
raspberrypi-gfx actually work
Thu Jul 4 14:00:00 2013 guillaumeAATTopensuse.org
- Update to ca5f9c4 (2013-07-02) and now use hardfp
Wed Jul 3 14:00:00 2013 guillaumeAATTopensuse.org
- Enable build for armv6l
Mon Apr 8 14:00:00 2013 larsAATTlinux-schulserver.de
- Update to baa3ecffe6 (2013-04-08):
+ ALSA fix to improve mame audio.
+ Add camera demo apps.
+ Removed unnecessary executable bits in documentation
+ improved README
Sun Dec 30 13:00:00 2012 bwiedemannAATTsuse.com
- Update to 76d0ac3 (2012-12-28) to support 512MB RAM
Thu Oct 25 14:00:00 2012 guillaumeAATTopensuse.org
- Update to 14a55da (2012.10.21) and add support to GFX
Fri Oct 19 14:00:00 2012 bwiedemannAATTsuse.com
- rename output to raspberrypi-firmware to be consistent
Sun Aug 12 14:00:00 2012 bwiedemannAATTsuse.com
- initial package from
https://github.com/raspberrypi/firmware/ cb9513f
