Changelog for netcdf-devel-4.6.1-41.9.x86_64.rpm :
Mon Jan 7 13:00:00 2019 Stefan Brüns
- Add support for openmpi2 flavor

* own directories below _mandir for all MPI flavors

* no support for parallel_netcdf yet, same as for HPC flavors
- Enable valgrind support also for aarch64
- defattr, license spec file cleanup

Wed Nov 14 13:00:00 2018 Stefan Brüns
- Only create a single devel-data subpackage providing the identical
macros.netcdf, and require it by both serial and openmpi devel packages.

Tue May 8 14:00:00 2018 adrianAATTsuse.de
- go back to hdf5 1.10

Mon Apr 30 14:00:00 2018 eichAATTsuse.com
- Fix devel-data package conflicts by a Provides/Conflicts that
doesn\'t collide with a package name.

Mon Apr 30 14:00:00 2018 eichAATTsuse.com
- Remove the \'ring magic\' as this seems to create issues during
verification.

Mon Apr 30 14:00:00 2018 eichAATTsuse.com
- (Temporarily) disable fpr S390
* as a check test fails currently
on BE.

Mon Apr 30 14:00:00 2018 eichAATTsuse.com
- Fix dependency issues with non-HPC devel packages and
devel-data.

Mon Apr 30 14:00:00 2018 eichAATTsuse.com
- Add a dependency to the HPC master package of the correct
flavor of libhdf5_hl (bsc#1091243).

Tue Apr 24 14:00:00 2018 jberryAATTsuse.com
- Avoid file conflict between devel-data packages over rpm macros.

Wed Apr 11 14:00:00 2018 eichAATTsuse.com
- Disable non-HPC builds on non-openSUSE systems:
a. currently only SUSE products/projects are supported/
b. non-HPC builds are not and have never been supported on SLE,
on openSUSE they are provided for compatibility reasons.

Wed Apr 4 14:00:00 2018 adrianAATTsuse.de
- update to version 4.6.1 (FATE#325561)

* changes since 4.4.4.1 are documented here:
https://www.unidata.ucar.edu/blogs/news/entry/netcdf-4-6-1
https://www.unidata.ucar.edu/blogs/news/entry/netcdf-4-6-0
https://www.unidata.ucar.edu/blogs/news/entry/netcdf-4-5-0
- Obsoletes all patches:
netcdf-disable-szip-linking.patch
netcdf-h5-test-fix-type-mismatch.patch
netcdf-no_date_time.patch
- drop hdf4 support
- use version 1.8 of hdf5 in non-hpc mode to avoid incompatible
on-disk data

Fri Feb 9 13:00:00 2018 eichAATTsuse.com
- Add support for openmpi2 for HPC (FATE#325089).

Fri Feb 9 13:00:00 2018 cgollAATTsuse.com
- Fix summary in module files (bnc#1080259)

Fri Jan 19 13:00:00 2018 eichAATTsuse.com
- Change the name of the MPI version of the module file directory
to pnetcdf to distinguish it from the \'serial\' one (boo#1075933).

Fri Jan 12 13:00:00 2018 eichAATTsuse.com
- Disable the openmpi3 flavor in some products.

Fri Jan 5 13:00:00 2018 eichAATTsuse.com
- Switch from gcc6 to gcc7 as additional compiler flavor for HPC on SLES.
- Add support for mpich and openmpi3 for HPC.

Fri Nov 10 13:00:00 2017 eichAATTsuse.com
- Add dependency on the hpdf5 library package
to the netdf libary package.

Thu Nov 2 13:00:00 2017 eichAATTsuse.com
- Simplify Group: - do not destinguish between MPI
and non-MPI: the IBS check scripts cannot handle
this well.

Mon Oct 30 13:00:00 2017 eichAATTsuse.com
- Fix wrong Requires: in static package.

Sat Oct 28 14:00:00 2017 eichAATTsuse.com
- Add minimal mpi-selector support for non-HPC MPI build.
This will avoid the MPI packages to conflict with the
\'serial\' ones as both provide the same files and libs.

Sat Oct 28 14:00:00 2017 eichAATTsuse.com
- Fix botched dependency for libpnetcdf-.

Tue Oct 24 14:00:00 2017 jjollyAATTsuse.com
- Added patch netcdf-h5-test-fix-type-mismatch.patch

* Fixes type mismatch in test tst_h_dimscales
(bsc#1064705).

Thu Oct 19 14:00:00 2017 eichAATTsuse.com
- Source mpivars.sh to fix the non-HPC openmpi %check.

Tue Oct 17 14:00:00 2017 eichAATTsuse.com
- Add magic to limit the number of flavors built in the
in the OBS ring.

Wed Sep 13 14:00:00 2017 eichAATTsuse.com
- Incorporated HPC-style builds using environment modules.
- Converted to multibuild (FATE#321719).
- renamed rpmlintrc to netcdf-rpmlintrc.
- Generate baselib.conf dynamically and only for the non-HPC
build: this avoids issues with the source validator.

Tue Sep 12 14:00:00 2017 badshah400AATTgmail.com
- Update to version 4.4.1.1:
- Fixed an issue where ncgen would potentially crash or write
incorrect netCDF4 binary data under very specific
circumstances [gh#Unidata/netcdf-c#323].
- Updated documentation related to netCDF variable names and
DAP2 access to reflect the undefined behavior potentially
observed when DAP2 reserved keywords are used as netCDF
variable names.
- Fixed an issue with nc_inq_type() not returning proper value
in some circumstances [gh#Unidata/netcdf-c#317].
- Corrected an issue related to test failures when
- -disable-utilities or -DENABLE_UTILITIES=OFF are specified
when building with autotools or cmake, respectively
[gh#Unidata/netcdf-c#313].
- Corrected a behavioral issue with the _NCProperties attribute
taking up too much space [gh#Unidata/netcdf-c#300],
[gh#Unidata/netcdf-c#301].
- Corrected behavior for nc-config so that, if nf-config is
found in system, the proper fortran-related information will
be conveyed [gh#Unidata/netcdf-c#296].
- Add netcdf-disable-szip-linking.patch: Disable building with
szip support for now, since test nc_test4/tst_interops5.c fails
otherwise; this is likely to be fixed with version 4.5.0 of
netcdf, but requires big enough changes that we don\'t backport
it here. Necessitates BuildRequires on libtool and running
autoreconf before configure.

Thu Feb 9 13:00:00 2017 dimstarAATTopensuse.org
- Explicitly BuildRequire m4

Sat Aug 6 14:00:00 2016 wbauerAATTtmo.at
- Remove %{optflags} from CFLAGS for now to fix build with hdf5-1.10
in Factory, see https://github.com/Unidata/netcdf-c/issues/244

Sun Jul 31 14:00:00 2016 virtuousfoxAATTgmail.com
- Add 32bit version to satisfy libavfilter6-32bit

Sun Jul 17 14:00:00 2016 jengelhAATTinai.de
- Trim descriptions. (libnetcdf11 will be the prominently installed
one and therefore retains it mostly.)

Fri Jul 15 14:00:00 2016 toddrme2178AATTgmail.com
- As far as I can find the settings file is only needed for
development.

Tue Jul 5 14:00:00 2016 adrianAATTsuse.de
- update to version 4.4.1
Details can be found in the RELEASE_NOTES file.
- Note: The combination of netCDF-C library versions earlier than
4.4.1 and libhdf5 1.10.0+ should be avoided, as they will result
in binary files not readable by systems using earlier libhdf5 versions.

Thu Mar 31 14:00:00 2016 dvaleevAATTsuse.com
- Regenerate ncx.c from ncx.m4. Tarball doesn\'t have fresh copy
of it. https://github.com/Unidata/netcdf-c/issues/159

Wed Mar 16 13:00:00 2016 toddrme2178AATTgmail.com
- Update to version 4.4.0. Highlights:

* Added CDM-5 support.

* Added support for opening in-memory file content.

* Modified CMakeLists.txt to work with the re-organized cmake
configuration used by the latest HDF5, 1.8.16, on Windows.
Before this fix, netCDF would fail to locate hdf5 1.8.16 when
using cmake on Windows.

* Modified ncgen to properly handle the L and UL suffixes for
integer constants to keep backward compatibility.
- Remove netcdf-correct_casting.patch, rendered irrelevant by
upstream change.
- Remov upstream-included netcdf-codecleanup.patch and
netcdf-pkgconfig.patch
- Rebase netcdf-no_date_time.patch

Sat Nov 21 13:00:00 2015 scorotAATTfree.fr
- install netcdf_par.h which is skipped when mpicc in not detected

Mon Aug 24 14:00:00 2015 toddrme2178AATTgmail.com
- Currently the regular, openmpi, and mpivachi2 versions of the
library packages all provide the exact same libraries. So any
package built against the -devel package will end up with an
\"unresolvable\" build error because there are multiple versions
of the library it can use. To avoid this, I have added generic
provides for the library package so packages can depend on the
version they really need, avoiding these build issues.
- Depend on the correct regular, openmpi, and mpivachi2 versions of
hdf, hdf5, and parallel-netcdf.

Mon Jul 27 14:00:00 2015 toddrme2178AATTgmail.com
- Update subpackage groups
- Make subpackage summaries and descriptions more consistent
- Provide rpm macros for version identification
- Spec file cleanups
- Build parallel versions of the library.

Fri Jul 24 14:00:00 2015 toddrme2178AATTgmail.com
- Build with HDF4 support

Sat Apr 18 14:00:00 2015 p.drouandAATTgmail.com
- Update to version 4.3.3.1

* When the NC_MPIPOSIX flag is given for parallel I/O access and
the HDF5 library does not have the MPI-POSIX VFD configured in,
the NC_MPIPOSIX flag is transparently aliased to the NC_MPIIO
flag within the netCDF-4 library.

* DAP requests now always include a restraint. Due to a problem in
version 4.3.2, no constraint was generated when all variables were
requested.

* Fixed the code for handling character constants in datalists in
ncgen. Two of the problems were:
- It failed on large constants
- It did not handle e.g.
- var = \'a\', \'b\', …
in the same way that ncgen3 did.
- Changes from version 4.3.3

* Fixed bug resulting in error closing a valid netCDF-4 file with
a dimension and a non-coordinate variable with the same name.
[NCF-324](https://bugtracking.unidata.ucar.edu/browse/NCF-324)

* Enabled previously-disabled shell-script-based tests for Visual
Studio when `bash` is detected.
- Update netcdf-no_date_time.patch

Tue Sep 2 14:00:00 2014 cooloAATTsuse.com
- fix license for spdx 1.2

Thu May 1 14:00:00 2014 ocefpafAATTgmail.com
- update to 4.3.2

* Improved type handling with respect to fill-values.

* Enabled netCDF-4 bit-for-bit reproducibility for nccopy and other
applications (thanks to Rimvydas Jasinskas and Quincey Koziol).

* Improved cmake build process.

* As part of an ongoing project, the Doxygen-generated netCDF documentation
has been reorganized. The goal is to make the documentation easier to
parse, and to eliminate redundant material.

Mon Feb 10 13:00:00 2014 opensuseAATTdstoecker.de
- update to 4.3.1.1

* Corrected a DAP issue reported by Jeff Whitaker related to
non-conforming servers.

* Corrected an issue with DAP tests failing in a 64-bit Cygwin
environment. NCF-286

* Add an extended format inquiry method to the netcdf API:
nc_inq_format_extended. NC_HAVE_INQ_FORMAT_EXTENDED is defined
in netcdf.h NCF-273

* Fixed fill value handling for string types in nc4_get_vara().

* Corrected behavior of nc_inq_unlimdim and nv_inq_unlimdims to
report dimids in same order as nc_inq_dimids.

* A number of previously-disabled unit tests were reviewed and
made active.

* When opening a netCDF-4 file, streamline the iteration over
objects in the underlying HDF5 file.

* Fixed netCDF-4 failure when renaming a dimension and renaming
a variable using that dimension, in either order. NCF-177

* When compiling with hdf4 support, both autotools and cmake-based
builds now properly look for the libjpeg dependency and will link
against it when found (or complain if it\'s not). Also added
ENABLE_HDF4_FILE_TESTS option to CMake-based builds.

* Fixed bug in ncgen; it was not properly filling empty string
constants (\"\") to be the proper length. NCF-279

* Fixed bug in ncgen where it was interpreting int64 constants as
uint64 constants. NCF-278

* Fixed bug in handling Http Basic Authorization. The code was
actually there but was not being executed. NCF-277

* Added hack to the DAP code to address a problem with the
Columbia.edu server. That server does not serve up proper DAP2 DDS
replies. The Dataset {...} name changes depending on if the request
has certain kinds of constraints. NCF-276

* Fixed bugs with ncdump annotation of values, using -b or -f
options. NCF-275

* Added better documentation about accessing ESG datasets. See
http://www.unidata.ucar.edu/software/netcdf/docs/esg.html.

* Corrected an issue with CMake-based builds enabling HDF4 support
where the HDF4 libraries were in a non-standard location.

* Fix bug introduced by NCF-267 where octal constants above \'\\177\'
were not recognized as proper octal constants. NCF-271

* Fixed an issue where the netcdf.3 man page was not being installed
by CMake-based builds. Github

* Modify ncgen to support NUL characters in character array
constants. NCF-267

* Modify ncgen to support disambiguating references to an enum
constant in a data list. NCF-265

* Corrected bug in netCDF-4 dimension ID ordering assumptions,
resulting in access that works locally but fails through DAP
server. NCF-166

* Ensure netCDF-4 compiles with OpenMPI as an alternative to
MPICH2. NCF-160

* Addressed issue with hanging Parallel netCDF-4 using HDF5 1.8.10.
NCF-240

* Removed deprecated directories:
librpc/
udunits/
libcf/
libcdmr/

* Added configure and accompanying configuration files/templates to
release repository. These will only be added to tagged releases
on GitHub.

* Integrated a fix by Quincey Koziol which addressed a variation of
NCF-250, Fix issue of netCDF-4 parallel independent access with
unlimited dimension hanging.

* Integrated change contributed by Orion Poplawski which integrated
GNUInstallDirs into the netCDF-C CMake system; this will permit
systems that install into lib64 (such as Fedora) to make install
without problem.

* Corrected an error with the CMake config files that resulted in the
netcdf.3 manpage not being built or installed.

* Added nc_rename_grp to allow for group renaming in netCDF-4 files. NCF-204

* Added a NC_HAVE_RENAME_GRP macro to netcdf.h, as per a request by
Charlie Zender. This will allow software compiling against netcdf
to easily query whether or not nc_rename_grp() is available.

* Added Greg Sjaardema\'s contributed optimization for the nc4_find_dim_len
function in libsrc4/nc4internal.c. The patch eliminates several
malloc/free calls that exist in the original coding.

* Added support for dynamic loading, to compliment the dynamic loading
support introduced in hdf 1.8.11. Dynamic loading support depends on
libdl, and is enabled as follows: NCF-258
autotools-based builds: –enable-dynamic-loading
cmake-based builds: -DENABLE_DYNAMIC_LOADING=ON

* Fix issue of netCDF-4 parallel independent access with unlimited
dimension hanging. Extending the size of an unlimited dimension in
HDF5 must be a collective operation, so now an error is returned if
trying to extend in independent access mode. NCF-250

* Fixed bug with netCDF-4\'s inability to read HDF5 scalar numeric
attributes. Also allow, in addition to zero length strings, a new
NULL pointer as a string value. to improve interoperability with
HDF5. This required a new CDL constant, \'NIL\', that can be output
from ncdump for such a string value in an HDF5 or netCDF-4 file.
The ncgen utility was also modified to properly handle such NIL
values for strings. NCF-56

* Fix contributed by Nath Gopalaswamy to large file problem reading
netCDF classic or 64-bit offset files that have a UINT32_MAX flag
for large last record size of a variable that has values larger than
1 byte. This problem had previously been fixed for writing such data,
but was only tested with an ncbyte variable.

* Fixed various minor documentation problems.

Mon Oct 21 14:00:00 2013 toddrme2178AATTgmail.com
- Update to 4.3.0

* fsync: Changed default in autotools config file; fsync must
now be explicitely enabled instead of explicitely disabled.

* Fixed netCDF-4 bug where odometer code for libdap2 mishandled
stride > 1. Bug reported by Ansley Manke.

* Fixed netCDF-4 bug where netCDF would ignore the HDF5 reference
type in the file, instead of rejecting the file as it should.

* Fixed netCDF-4 bug with particular order of creation of
dimensions, coordinate variables, and subgroups resulting in
two dimensions with the same dimension ID.

* Fixed netCDF-4 bug with a multidimensional coordinate variable
in a subgroup getting the wrong dimension IDs for its
dimensions.

* Fixed bug with incorrect fixed-size variable offsets in header
getting written when schema changed for files created by
parallel-netcdf. Thanks to Wei-keng Liao for developing and
contributing the fix.

* Fixed bug in handling old servers that do not do proper
Grid to Structure conversions.

* Replaced the oc library with oc2.0

* Fix bug with nc_get_var1_uint() not accepting unsigned ints
larger than 2
*
*31.

* Fix to convert occurrences of \'/\' in DAP names to %2f.

* Fix bug in netCDF-4 with scalar non-coordinate variables with
same name as dimensions.

* Fix bug in which calling netCDF-4 functions in which behavior
that should not depend on order of calls sometimes produces
the wrong results.

* Merged in nccopy additions from Martin van Driel to support
- g and -v options for specifying which groups or variables are
to be copied.

* Merged in parallel-netcdf bugs fixes from Greg Sjaardema.

* Modify ncgen so that if the incoming file has a special
attribute, then it is used to establish the special property of
the netcdf file, but the attribute is not included as a real
attribute in the file..

* Added library version info to the user-agent string so that the
server logs will be more informative.

* Added work around for bad servers that sometimes sends DAP
dataset with duplicate field names.

* Fixed bug with strided access for NC_STRING type.

* Prevented adding an invalid _FillValue attribute to a variable
(with nonmatching type or multiple values), to avoid later
error when any record variable is extended.

* Fix bug in which some uses of vlen within compounds causes HDF5
errors.

* Fixed ncdump bug in display of data values of variables that use
multiple unlimited dimensions.

* Fix bug in which interspersing def_var calls with put_var calls
can lead to corrupt metadata in a netCDF file with groups and
inherited dimensions.

* Building shared libraries works with DAP and netCDF4
functionality.

* 32-and-64-bit builds are working under MinGW on Windows.

* Config.h for Windows compiles are included in the build.

* NetCDF-4 dependency on NC_MAX_DIMS has been removed.

* 64-bit DLL\'s are produced on Windows.

* DLL Packaging issues are resolved.

* The CMake build system (with related ctest and cdash systems
for testing) has been integrated into netCDF-C. This allows for
Visual Studio-based builds in addition to gcc-based builds.
This requires at least CMake version 2.8.8. This
replaces/supplements the cross-compiled set of Visual-Studio
compatible netCDF libraries introduced in netCDF 4.2.1-rc1.
- Updated buildrequires versions.

Tue Oct 16 14:00:00 2012 pthAATTsuse.de
- Copy Changes from the release notes to here for the updates to 4.2.1
and 4.2.1.1

Sun Aug 5 14:00:00 2012 ocefpafAATTgmail.com
- Update to 4.2.1.1:

* Fix DAP performance bug remotely accessing large files (> 2GiB).

* Properly escape special characters in CDL output from ncdump for
netCDF-4 string data.

Wed Jul 25 14:00:00 2012 ocefpafAATTgmail.com
- Update to 4.2.1:

* Add a specific NC_MMAP mode flag to modify behavior of NC_DISKLESS.

* Changed the file protections for NC_DISKLESS created files to 0666.

* Fixed ncdump to report error when an unsupported option is specified.

* Fixed documentation of CDL char constants in Users Guide and ncgen
man page.

* Fixed memory leak detected by valgrind in one of the HDF5 tests.
For further changes pleaase see the file RELEASE_NOTES in
/usr/share/doc/packages/netcdf

Thu Apr 26 14:00:00 2012 behrischAATTusers.sourceforge.net
- upstream removed Texinfo documentation

Mon Apr 9 14:00:00 2012 ocefpafAATTgmail.com
- Updated to 4.2

* Fortran and C++ APIs are now in separate packages
- Removed netcdf-dependencies.patch

Thu Apr 5 14:00:00 2012 jengelhAATTmedozas.de
- Do not require valgrind on arches where it is not available
(e.g. sparc)

Fri Mar 16 13:00:00 2012 cfarrellAATTsuse.com
- license update: SUSE-NetCDF
Use SPDX- proprietary prefix until this license is accepted upstream by
spdx.org

Wed Nov 30 13:00:00 2011 jengelhAATTmedozas.de
- Remove redundant/unwanted tags/section (cf. specfile guidelines)
- Use %_smp_mflags for parallel building
- Appropriate rpmgroups for shlib packages

Tue Nov 29 13:00:00 2011 ocefpafAATTgmail.com
- Added explicit hdf5 dependency.
- Rebuild with hdf5 1.8.8
- Some spec file clean-ups.

Sun Jun 26 14:00:00 2011 ocefpafAATTyahoo.com.br
- Added pkgconfig and fflags patches
- Dropped libm patch fixed upstream
- Fixed summary, license info, description
- Created doc and static packages

Sun Jun 26 14:00:00 2011 ocefpafAATTyahoo.com.br
- updated to 4.1.3

Thu Jun 2 14:00:00 2011 ocefpafAATTyahoo.com.br
- rename libnetcdf-devel to netcdf-devel as recommended by pth

Fri Apr 29 14:00:00 2011 ocefpafAATTyahoo.com.br
- updated to version 4.1.2
- added flag --enable-dap for OpenDap support
- updated the patches

Tue Nov 30 13:00:00 2010 pthAATTsuse.de
- Just fix the casting in px_get to avoid the type-punning warning.
- Add a man page for nc-config.
- Move nc-config and its man page to the devel package.
- Remove the dependency on netcdf from libnetcdf.
- BuildRequire pkgconfig for libnetcdf-devel.
- Declare strlcat if needed.
- Don\'t use __DATE__ and __TIME__ to reduce the need for recompiling.

Tue May 19 14:00:00 2009 prusnakAATTsuse.cz
- updated to 4.0.1

* Added optional arguments to F90 API to nf90_open/create,
nf90_create_var, and nf90_inquire_variable so that all netCDF-4
settings may be accomplished with optional arguments, instead
of separate function calls.

* Added control of HDF5 chunk cache to allow for user performance
tuning.

* Added parallel example program in F90.

* Changed default chunking to better handle very large variables.

* Made contiguous the default for fixed size data sets with no
filters.

* Fixed bug in nc_inq_ncid; now it returns NC_ENOGRP if the named
group is not found.

* Fixed man pages for C and F77 so that netCDF-4 builds will
result in man pages that document new netCDF-4 functions.

* Added OPeNDAP support based on a new C-only implementation.
This is enabled using --enable-dap option and requires libcurl.
The configure script will attempt to locate libcurl, but if it
fails, then its location must be specified by the --with-curl
option.

* Changed chunksizes to size_t from int.

* Fixed fill value problem from F77 API.

* Fixed problems in netcdf-4 files with multi-dimensional
coordinate variables.

* Fixed ncgen to properly handle CDL input that uses Windows line
endings (\"\\r\
\"), instead of getting a syntax error.

* Added \"-s\" option to ncdump to display performance
characterisitics of netCDF-4 files as special virtual attributes,
such as _Chunking, _DeflateLevel, _Format, and _Endianness.

* Added \"-t\" option to ncdump to display times in human readable
form as strings. Added code to interpret \"calendar\" attribute
according to CF conventions, if present, in displaying
human-readable times.

* Added experimental version of ncgen4 capable of generating
netcdf-4 data files and C code for creating them. In addition,
it supports the special attributes _Format, etc.

* Fixed Fortran 90 int64 problems.

* Rewrote HDF5 read/write code in accordance with performance advice
from Kent.

* Fixed memory leaks in gets/puts of HDF5 data.

* Fixed some broken tests for parallel I/O (i.e. MPI) builds.

* Fixed some cross-compile problems.

* Rewrote code which placed bogus errors on the HDF5 error stack,
trying to open non-existant attributes and variables. Now no HDF5
errors are seen.

* Removed man subdirectory. Now man4 subdirectory is used for all
builds.

* Changed build so that users with access to parallel make can
use it.

* Added experimental support for accessing data through OPeNDAP
servers using the DAP protocol (use --enable-opendap to build it).

* Fixed ncdump bugs with array field members of compound type
variables. Fixed ncdump bug of assuming default fill value
for data of type unsigned byte.