Changelog for flrig-1.3.42-1.1.i586.rpm :
Sun Feb 3 13:00:00 2019 wkAATTire.pw.edu.pl
- update to version 1.3.42

Thu Nov 8 13:00:00 2018 wkAATTire.pw.edu.pl
- update to version 1.3.40
- specfile cleanup

Tue May 16 14:00:00 2017 dl8fclAATTdarc.de
- update to version 1.3.31

* IC735 Changed frequency resolution to 10 Hertz

* FT817 CW MODE. Modify code to insure that CW is USB
and CW-R is LSB type reception

* Added FT-891 class and support code

* IC7200 Initial BW added

* TS850 Added backend class for TS850 transceiver

Sat Apr 1 14:00:00 2017 dl8fclAATTdarc.de
- update to version 1.3.30

* remove FT817 base class dependency from both
FT857D and FT897D class definitions.

Thu Mar 30 14:00:00 2017 dl8fclAATTdarc.de
- update to version 1.3.29
TS990

* Enable MON on/off for TX monitoring

* Set / Read SWR & ALC

* Replace all atoi(...) code with fm_decimal(p, n)
FT817

* added code to read vfo B state

* added 5 watt power scale

* added undocumented read vfo A/B state
0x00 0x55 0x00 0x00 0xBB

* Implement undocumented CAT command BD to read
PWR, SWR and ALC

* Prevent flrig from making changes to xcvr vfo
mode etc. when memory channel usage detected
- display MEMORY on flrig main display when
so detected

* disabled POWER control on wide and touch UI
Xcvr Init

* cleaned up init code to provide improved code readability

* added test for two vfos to VFO initialization
k3 kx3

* code change needed to read K3/KX3 meters
AGC button

* set button illumination to user color selection
initial bandwidth

* retain xcvr bandwidth when changing modes via xmlrpc server
command
BCD/Decimal conversions

* change parameter passing to string vice sz pointer.
- 64 bit compiles were passing null strings when contents
of original substr returned values were similar to \"00 40\" !
Missing tooltips

* Added tooltips for S-meter, CW-wpm
Polling

* Add set all for meters & operating controls
TS480SAT update

* Update to NR, AN, and Squelch controls

* Change default baud rate to 57600
FT817 metering

* Enable S-meter and Power-out metering
Exchange-Equalize AB

* Implement Exchange CAT command for Icom xcvrs
- 718, 706MKIIG
- 746, 746PRO, 756, 756PRO2, 756PRO3
- 7000, 7100, 7200, 7300, 7410, 7600, 7800
- 910, 9100
IC7300 update

* all updates combined effort of KB1OIQ and W1HKJ

* change mode set/get methods

* correct various command strings

* added AGC, OFF, FAST, MED, SLO

* add IF shift function using upper/lower passband tuning commands.
- IF shift slider range changes to +/- BW/2 as bandwidth
is selected.
- IF shift slider always increments by 50 Hz

* added tooltips to VOX and Compression controls
PCR1000 update

* correction to IF Shift control method

* corrected various text strings
IC7200 mods

* modify set_split method

* add get_split, can_split methods

* add IF shift function using upper/lower passband
tuning commands.
- IF shift slider range changes to +/- BW/2 as bandwidth
is selected.
- IF shift slider always increments by 50 Hz

* correct logic for queA / queB processing

Sun Jan 22 13:00:00 2017 dl8fclAATTdarc.de
- update to version 1.3.28
Multiple xmlrpc servers

* Add configuration item in the file \"flrig.prefs\"
- xml_port:nn
where nn is the port number, default is 12345
- start and then stop flrig
- edit the flrig.prefs file to change the port assignment
- direct configuration usage with the --config-dir command
line parameter.
Separate PTT

* Change to allow both DTR and RTS switching
K2 comments

* Added data strings received from M1CNK
User defined command buttons

* Added 8 user defined command buttons
- allows user to add items like power on / off etc.
ic7300 update

* Corrected data mode tables and command strings

* Corrected get bandwidth command strings
IC9100 update

* Added CAT strings for setting data mode for
LSB and USB data modes added to mode combo box

Thu Dec 8 13:00:00 2016 dl8fclAATTdarc.de
- update to version 1.3.27
TS480SAT extras

* Added Noise blanker on/off, set/get value
New controls

* Added following controls
- AGC
For these transceivers
- IC-7200
- TS-480SAT
Xmlrpcpp source director

* update based on fldigi/src/xmlrpcpp.
- needed for correct build on OS X Xcode8
FT100D

* Correct vfo tracking problem
IC9100 mode/bw

* Corrected Mode selection

* Disabled BW selection
TS990 TS590SG

* Modification to read swr/alc

* Modification to initialize ATT
restore keep rig data

* add missing set clear for menu items
TT 550 Pegasus mods

* enabled VFO adjust

* changed method of setting TUNE command

* added AT11 support

* added power peak detect
IC7300 serial defaults

* Change to be same as 7200 defaults sans baudrate
TS990 ALC/SWR

* correct meter reading methods
fix XmlRpc tm_mday comparison typo

* xmlrpcpp/XmlRpcValue.cpp: In function ‘bool XmlRpc::tmEq(const tm&,
const tm&)’:
xmlrpcpp/XmlRpcValue.cpp:159:52: warning: self-comparison always
evaluates to true [-Wtautological-compare]
t1.tm_hour == t2.tm_hour && t1.tm_mday == t1.tm_mday &&
~~~~~~~~~~~^~~~~~~~~~~~~
mxe update

* corrected mxe build scripts
IC756 volume range

* Change range to 0..100
C11 errors

* changes to correct C11 reported warnings/errors

Mon Jun 27 14:00:00 2016 dl8fclAATTdarc.de
- update to version 1.3.26
IC7200 update, Added read attenuator method to IC7200 class

Sat Feb 6 13:00:00 2016 dl8fclAATTt-online.de
- update to version 1.3.24

* Added backend for Yaesu FTdx9000 transceiver

* Add new backend for Yaesu FT0991

* FT5000 removed CW_SPOT_TONE method

* FTdx3000 removed CW_TONE_SPOT method

* removed dependency on enumerated list of rigs
- a cause of numerous seg faults when adding and
testing a new transceiver class

* removed use of \"rig_nbr\" to reference either list of rigs
or selected rig.
- rigs are uniquely identified by noun name

* TS2000 updates
- VFO-B read/write
- A/B switch
- Corrected SL/SH tables
- Corrected xml server updates of hi/lo cutoff values
- Corrected rig enumerations in rigbase.h and rigs.h
- Tested TS2000 class with physical transceiver
- Calibrated notch filter settings

* Added code in serial thread to isolate K3/KX3 vfo, mode, bw
reads from the other supported transceivers.

* FT900: Update from DJ7HS
- vfo A/B swap fix
- poll-split fix
- read front panel vfoA/B select

* IC7100 data mode detect

Sun Dec 13 13:00:00 2015 dl8fclAATTdarc.de
- update to version 1.3.23

* FT817 FT857D FT897D,added read ACK after every write,
up to 10 retries if ACK not received after write.

* xmlrpc server, added new get\'s
- rig.get_info, transfers all controls data in a single string
- rig.get_update, transfers all changed controls data in a
single string, \"NIL\" if no changes FT900

* FT900 backend added, contributed by Ernst Schroeder, DJ7HS

* Correct split behavior for have_splitAB designated xcvrs like
the FT950 and FT900 TS590SG

* add back end for 590SG MXE update FT990a

* simple blind control of FT990 with very early ROM version Set
Mode/BW controls

* change ordering of set when mode change read from transceiver
KENWOOD mods

* change read SWR / ALC command strings and interpretation for TS990

* correct various errors in Shift/Width, Lo/Hi cut tables.
Reorder use of SL and SH variables - TS480 - TS590 - TS870
- TS990 - TS2000 IC7800

* Added IC-7800 class fldigi BW interface

* Add missing bw_vals_ to various xcvr backends restore xml client

* allow flrig to act as either a multi-client xmlrcp server or a
single client to fldigi server BUILD_{DATE,USER,HOST}

Tue Apr 28 14:00:00 2015 dl8fclAATTdarc.de
- update to version 1.3.22
requires libflxmlrpc

Sat Apr 4 14:00:00 2015 dl8fclAATTdarc.de
- update to version 1.3.21, Maintenance release

Tue Mar 24 13:00:00 2015 dl8fclAATTdarc.de
- update to version 1.3.20, Maintenance release

Fri Dec 26 13:00:00 2014 dl8fclAATTdarc.de
- update to version 1.3.19, Maintenance release

Wed Dec 10 13:00:00 2014 dl8fclAATTdarc.de
- update to version 1.3.18, Maintenance release

Thu Oct 16 14:00:00 2014 dl8fclAATTdarc.de
- update to version 1.3.17

* new transceivers FT450D, IC7410

* support for touch screen interface

Mon Jun 30 14:00:00 2014 dl8fclAATTdarc.de
- update to version 1.3.16, Maintenance release

* Corrected FTdx1200 get_mode

* insure that RTS/DTR are inactive when closing the serial port

* Added wait_char function

* Modified FT950 code to use wait_char

* fixed logic error for --config-dir expansion

* Added detection of socat virtual ports created as $HOME/virtual/ttySnn

* reorganize src directories / files in preparation for addition of remote server capability.

* Added detection of executable location in folder ending in FL_APPS. If found, that folder is used as the $HOME folder for all flrig configuration folders/files.

* Added detection of flrig.files in $HOME. If present that directory is used in lieu of .flrig

* Updates iaw W3NR feedback (TT599)

* Corrected FT847 power out and smeter conversions

* Corrected Pegasus split mode operation
- When ON
. Receive frequency remains on active VFO
. Transmit frequency changes to inactive VFO
- When OFF
. Rx & Tx frequency iaw active VFO

* IC756 xcvr added
ComboBox/ListBox

* add key stroke handler to popup

* down arrow opens the popup if the combo has keyboard focus.

* up/down arrow keys move selection in popup

* enter key moves the popup selection to the output widget

* escape key closes the popup

* enter ASCII key sequence to search for and select corresponding entry in popup

* closing popup erases keyboard buffer

* added Fl_ListBox, derived from Fl_ComboBox
License Declaration

* Updated all source licensing to satisfy distribution requirements.

Tue Feb 4 13:00:00 2014 dl8fclAATTdarc.de
- update to version 1.3.5, Maintenance release

Tue Oct 29 13:00:00 2013 dl8fclAATTdarc.de
- update to version 1.3.4, Maintenance release

Tue Sep 3 14:00:00 2013 dl8fclAATTdarc.de
- update to version 1.3.3

* Added FTdx3000 and IC-7100

Fri May 24 14:00:00 2013 dl8fclAATTdarc.de
- update to version 1.3.2, Maintenance release

* Added control class for Yaesu FT-990

* Added serial port identification use /dev/serial/by-id/ entries

* Added VFO adjust control for FT950

* Add code to control A/B; B/A split operations for TS870

Sun Jan 6 13:00:00 2013 dl8fclAATTdarc.de
- update to version 1.3.11, Maintenance release

Fri Dec 21 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.10

Wed Dec 12 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.09, Maintenance release

Sat Sep 1 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.08

Mon Aug 6 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.07, Maintenance release

Sat Jul 7 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.05, Maintenance release

Mon Jun 25 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.03

Mon May 7 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.3.01

Tue Apr 17 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.13

Tue Mar 27 14:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.12

Thu Jan 26 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.6, build with fltk-1.1.10 and fltk-1.3.0

Tue Dec 27 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.5, maintenance release

Wed Nov 2 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.2

Mon Aug 22 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.0

Sun Apr 10 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.1.3

Wed Mar 30 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.1.2

Tue Mar 22 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.1.1

Sun Feb 20 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.0.1

Sun Jan 30 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.0.0bX

Sat Nov 27 13:00:00 2010 dl8fclAATTdarc.de
- update to version 1.0.0bO

Thu Aug 5 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.0.0bN

Sat Jul 17 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.0.0bI

Tue Jul 6 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.0.0bG

Mon May 3 14:00:00 2010 dl8fclAATTdarc.de
- import into buildservice