Changelog for
dracut-037-34.5.x86_64.rpm :
Wed Sep 24 14:00:00 2014 trennAATTsuse.de
- Add ip= and root=nfs.. to dracut internal cmdline to make nfsroot working
(bnc#896464)
* Add 0160-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch
- Fix error message in case there is no internal dracut cmdline added
Simple fix
* Add 0161-Fix-error-message-when-there-are-no-internal-kernel-.patch
- Request DHCP lease instead of getting/applying the offer
No bug number, but Pawel rated this high prio. This should hit SLE12 still.
* Add 0162-network-Request-DHCP-lease-instead-of-getting-applyi.patch
Mon Sep 22 14:00:00 2014 trennAATTsuse.de
- Try to load xennet driver in network module (if loaded).
bnc#896464, bnc#896259
* Add 0159-network-Try-to-load-xennet.patch
Thu Sep 11 14:00:00 2014 trennAATTsuse.de
- dracut.usage.asc: Remove distro specific help from manpage (bnc#895363)
* Add 0156-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch
- Add /boot/zipl to host devs if it is a mount point (bnc#892187)
* Add 0157-Add-boot-zipl-to-host-devs-if-it-is-a-mount-point.patch
- Add SUSE kernel module dependencies (in /etc/modprobe.d/
*) (bnc#895331)
* Add 0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch
Thu Sep 4 14:00:00 2014 trennAATTsuse.de
- Network module may take quite a lot of initrd space. Do not add it
unconditionally (bnc#892851)
* Add 0153-Only-add-network-module-on-request-and-on-dependenci.patch
- S390x can do s2disk, allow resume module there
(bnc#889795)
* Add 0154-resume-Also-allow-this-module-on-S390-again-s2disk-c.patch
- Harden iscsi parameter checking. No bug report, but this problem
was found during multipath testing and happens with 2 or more
iscsi devices.
* Add 0155-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch
Fri Aug 29 14:00:00 2014 trennAATTsuse.de
- Do not blindly try to touch the logfile (bnc#893219)
* Add 0146-dracut.sh-corrected-logfile-check.patch
- Only fix UUID= fstab parsing
* Add 0147-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch
- Also fix other parsing syntax in fstab like LABEL=
* Add 0148-dracut.sh-Fix-LABEL-and-other-fstab-syntax.patch
- Fix up some bugs from previous commit
* Add 0149-dracut.sh-Fix-fstab-parsing-again.patch
- bnc#893615
* Add 0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch
- pixz does need too much memory, go back to xz in a conservative way
(bnc#893981)
* Add 0151-Go-back-to-xz-again-pixz-may-use-too-much-memory-whi.patch
- Add some default tools to initrd when debug module is included and
already provided an commented example line how to easily enable it.
No functional change by default.
* Add 0152-Add-a-comment-to-easily-add-debug-modules-also-add-v.patch
Thu Aug 21 14:00:00 2014 trennAATTsuse.de
- dracut.sh: check for logfile (--logfile option) and create it if necessary
Add 0139-dracut.sh-check-for-logfile-logfile-option-and-creat.patch
- Avoid duplicate names in host_devs
Add 0140-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch
- iscsi: Avoid bad ip route call on empty address
Add 0141-iscsi-Avoid-bad-ip-route-call-on-empty-address.patch
- 40network: Don\'t report error for .../ifroute-
* during module setup
Add 0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch
- iscsi: Fix up ipv6 in brackets , iterate over all needed iscsi mounts
Add 0143-iscsi-Fix-up-ipv6-in-brackets-iterate-over-all-possi.patch
- 90crypt: Fixed crypttab_contains() to also work with device in /etc/crypttab
Add 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch
- 40network: handle \'ip=ifname:static\' correctly (bnc#892801)
Add 0145-40network-handle-ip-ifname-static-correctly.patch
Thu Aug 14 14:00:00 2014 trennAATTsuse.de
- Allow multiple configurations per network interface (bnc#887906)
Add 0133-Allow-multiple-configurations-per-network-interface-.patch
- Remove bootdev warning (bnc#881112)
Add 0134-Remove-bootdev-warning-bnc-881112.patch
- check for existance of 69-dm-lvm-metad.rules in modules_setup.sh, lvm module
(bnc#891791)
Add 0135-lvm-Fix-12819a579900b9691e2-check-for-existance-of-6.patch
- Moved persistent network rule revert to another file (was not in github):
Delete: 0133-Remove-70-persistent-net.rules.patch
Add: 0136-Revert-95udev-rules-add-persistent-network-rule.patch
- dracut-use-fipscheck-openssl.patch: Switch from Mozilla NSS sha256hmac
checking to fipscheck as recommended
Add: 0137-Switch-from-Mozilla-NSS-sha256hmac-checking-to-fipsc.patch
- warpclock: Do not use warpclock module on S390(x), hwclock does not exist
there (bnc#884513)
Add 0138-warpclock-Do-not-use-warpclock-module-on-S390-x-hwcl.patch
Tue Aug 5 14:00:00 2014 trennAATTsuse.de
- 99base: Increase initqueue timeout in non systemd case (bnc#887402)
* Add: 0127-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch
- 90lvm: Install dm-snapshot module (bnc#888530)
* Add: 0128-90lvm-Install-dm-snapshot-module.patch
- Revert commit 6ecab258710d158a7a6 and only do not wait for swap via
parameter (bnc#882812)
* Add: 0129-Revert-commit-6ecab258710d158a7a6-and-only-do-not-wa.patch
- nfs: Always add all kernel modules for kdump (bnc#887906)
* Add: 0130-nfs-Always-add-all-kernel-modules-for-kdump.patch
- 40network: handle prefixed IP addresses correctly (bnc#880108)
* Add: 0131-40network-handle-prefixed-IP-addresses-correctly.patch
- 40network: fixup static network configuration
* Add: 0132-40network-fixup-static-network-configuration.patch
- Remove 70-persistent-net.rules
* Add: 0133-Remove-70-persistent-net.rules.patch
Mon Jul 21 14:00:00 2014 hareAATTsuse.de
- mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated
(bnc#886630)
* Add: 0120-mkinitrd-suse.sh-Bail-out-with-exit-1-if-initrd-cann.patch
- Adjust initramfs-$kernel.img to SUSE default: initrd-$kernel
(bnc#882306)
* Add: 0121-Adjust-initramfs-kernel.img-to-SUSE-default-initrd-k.patch
- btrfs: btrfs-dump-super and btrfs-select-super do not exist
(bnc#886883)
* Add: 0122-btrfs-btrfs-dump-super-and-btrfs-select-super-do-not.patch
- 95zfcp_rules: fix typo in module_setup (bnc#887582)
* Add: 0123-95zfcp_rules-fix-typo-in-module_setup.patch
- 40network: Update iBFT scanning code to handle IPv6 (bnc#887542)
* Add: 0124-40network-Update-iBFT-scanning-code-to-handle-IPv6.patch
- 40network: separate \'mask\' and \'prefix\' (bnc#887542)
* Add: 0125-40network-separate-mask-and-prefix.patch
- 01fips: Add drbg module to force loaded modules (bnc#875855)
* Add: 0126-01fips-Add-drbg-module-to-force-loaded-modules.patch
Mon Jul 14 14:00:00 2014 trennAATTsuse.de
- Fixup executable bits of newly patched files manually in spec file
bnc#887117
Mon Jul 14 14:00:00 2014 hareAATTsuse.de
- Mark all scripts as executable (bnc#887010)
* Remove: 0116-81cio_ignore-Mark-scripts-as-executable
* Add: 0116-Mark-scripts-as-executable.patch
- 95dasd_rules: Enable device before checking type
* Add: 0117-95dasd_rules-Enable-the-device-before-checking-devic.patch
- 95zfcp_rules: Enable device before checking type
* Add: 0118-95zfcp_rules-Enable-the-device-before-checking-devic.patch
- Reset IFS variable
* Add: 0119-Reset-IFS-variable.patch
Sat Jul 12 14:00:00 2014 hareAATTsuse.de
- Handle module alias properly (bnc#886839)
* Add: 0115-Handle-module-alias-properly.patch
- 81cio_ignore: Mark scripts as executable (bnc#887010)
* Add: 0116-81cio_ignore-Mark-scripts-as-executable.patch
Fri Jul 11 14:00:00 2014 hareAATTsuse.de
- 91zipl: Translate \'ext2\' into \'ext4\' module
* Add: 0114-91zipl-Translate-ext2-3-into-ext4.patch
Thu Jul 10 14:00:00 2014 hareAATTsuse.de
- Enable converting of directory /var/run /var/lock to symlinks
(bnc#877680)
* Add: 0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch
- Fixup typo \'firmare\' instead of \'firmware\'
* Add: 0107-Fixup-typo-firmare-instead-of-firmware.patch
- 91zipl: Store commandline correctly
* Add: 0108-91zipl-Store-commandline-correctly.patch
- 95dasd_rules: Store all devices in commandline
* 0109-95dasd_rules-Store-all-devices-in-commandline.patch
- 95zfcp_rules: Store all devices in commandline
* Add: 0110-95zfcp_rules-Store-all-devices-in-commandline.patch
- 90mdraid: Remove line for \'offroot\' detection
* Add: 0111-90mdraid-Remove-line-for-offroot-detection.patch
- 99base: warn on invalid command for initqueue
* Add: 0112-99base-warn-on-invalid-command-for-initqueue.patch
- 91zipl: Install script as executable
* Add: 0113-91zipl-Install-script-as-executable.patch
Tue Jul 8 14:00:00 2014 hareAATTsuse.de
- Print stored dracut commandline during initramfs build
* Add: 0101-Print-stored-dracut-commandline-during-initramfs-bui.patch
- Align dev_unit_name() with systemd\'s function
* Add: 0102-Align-dev_unit_name-with-systemd-s-function.patch
- Fixup missing separators in rootfs-block cmdline
* Add: 0103-Fixup-missing-separators-in-rootfs-block-cmdline.patch
- Generate fallback mount unit for root filesystem (bnc#855258)
* Add: 0104-Generate-fallback-mount-unit-for-root-filesystem.patch
- 95iscsi: parse output from iscsiadm correctly (bnc#886199)
* Add: 0105-95iscsi-parse-output-from-iscsiadm-correctly.patch
Thu Jul 3 14:00:00 2014 dsterbaAATTsuse.cz
- 90btrfs: Install rescue utilities to initrd
* Add: 0100-btrfs-add-initrd-rescue-utilities.patch
Thu Jul 3 14:00:00 2014 hareAATTsuse.de
- 40network: create /var/lib/wicked in ifup.sh (bnc#885141)
* Add: 0089-40network-create-var-lib-wicked-in-ifup.sh.patch
- dracut: caps: Remove whole caps module
* Add: 0090-dracut-caps-Remove-whole-caps-module.patch
- dracut: biosdevname: Only install if present
* Add: 0091-dracut-biosdevname-In-SUSE-biosdevname-package-is-in.patch
- dracut: nbd: Only complain of missing binary in hostonly mode
if rootfs is on nbd
* Add: 0092-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch
- 95iscsi: generate commandline for software iscsi (bnc#880108)
* Add: 0093-95iscsi-generate-commandline-for-software-iscsi.patch
- Implement shortcut \'ip=
:static\' for static configuration
* Add: 0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch
- 95iscsi: use static configuration for software iscsi (bnc#884768)
* Add: 0095-95iscsi-use-static-configuration-for-software-iscsi.patch
- dracut: Fix error: local: can only be used in a function
* Add: 0096-dracut-Fix-error-local-can-only-be-used-in-a-functio.patch
- Implement \'rd.timeout\' to modify the device timeout (bnc#878770)
* Add: 0097-Implement-rd.timeout-to-modify-the-device-timeout.patch
- Do not call \'lvm\' for non-LVM device-mapper devices
* Add: 0098-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch
- 90multipath: Load device_handler modules early during boot (bnc#871617)
* Add: 0099-90multipath-Load-device_handler-modules-early-during.patch
Fri Jun 27 14:00:00 2014 hareAATTsuse.de
- 91zipl: Add new module for s390x configuration changes (bnc#884743)
* Add: 0088-91zipl-Add-new-module-to-update-s390x-configuration.patch
Thu Jun 26 14:00:00 2014 hareAATTsuse.de
- 95dasd_rules: Fixup rd.dasd parsing
* Add: 0079-95dasd_rules-fixup-rd.dasd-parsing.patch
- 95dasd_rules: Print out rd.dasd command-line
* Add: 0080-95dasd_rules-print-out-rd.dasd-commandline.patch
- 95dasd_mod: do not set module parameter
* Add: 0081-95dasd_mod-do-not-set-module-parameters-if-dasd_cio_.patch
- 00warpclock: Check for /sbin/hwclock (bnc#884513)
* Add: 0082-00warpclock-check-for-sbin-hwclock.patch
- 95zfcp_rules: Fixup rd.zfcp parsing
* Add: 0083-95zfcp_rules-Fixup-rd.zfcp-parsing.patch
- 95rootfs_block: terminate commandline parameter
* Add: 0084-95rootfs-block-Correctly-terminate-commandline-param.patch
- 95zfcp_rules: Print out rd.zfcp command-line
* Add: 0085-95zfcp_rules-print-out-rd.zfcp-commandline-parameter.patch
- 95zfcp_rules: Auto-generate ipl device rule
* Add: 0086-95zfcp_rules-Auto-generate-udev-rule-for-ipl-device.patch
- 95dasd_rules: Auto-generate ipl device rule
* Add: 0087-95dasd_rules-Auto-generate-udev-rule-for-ipl-device.patch
Mon Jun 23 14:00:00 2014 hareAATTsuse.de
- More empty commandline fixes
* Add: 0074-More-empty-cmdline-fixes.patch
- 95dasd_rules: enable parsing of rd.dasd= commandline parameter
* Add: 0075-95dasd_rules-enable-parsing-of-rd.dasd-commandline-p.patch
- Correctly set cio_ignore for dynamic s390 rules
* Add: 0076-Correctly-set-cio_ignore-for-dynamic-s390-rules.patch
- 90multipath: add missing 11-dm-mpath.rules file (bnc#883149)
* Add: 0077-90multipath-add-missing-11-dm-mpath.rules-file.patch
- Restore original IFS value (bnc#883770)
* Add: 0078-Restore-original-IFS-value.patch
Wed Jun 18 14:00:00 2014 tbehrensAATTsuse.com
- Fix non-export of journal dev boot options
* Add: 0071-Fix-non-export-of-journal-dev-boot-options.patch
- Also export root= boot param for hostonly-cmdline
* Add: 0072-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch
- Don\'t create lots of empty cmdline files
* Add: 0073-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch
Tue Jun 17 14:00:00 2014 hareAATTsuse.de
- 81cio_ignore: rewrite module to not mount any filesystem
(bnc#882685)
* Add: 0070-81cio_ignore-rewrite-module.patch
Tue Jun 17 14:00:00 2014 hareAATTsuse.de
- 81cio_ignore: ignore module if cio_ignore is not specified
(bnc#882685)
* Add:
0069-81cio_ignore-skip-module-if-cio_ignore-is-not-active.patch
Mon Jun 16 14:00:00 2014 hareAATTsuse.de
- 40network: always start netroot in ifup.sh (bnc#881235)
* Add: 0066-40network-always-start-netroot-in-ifup.sh.patch
- 95fcoe: check() always returns 255
* Add: 0067-95fcoe-check-always-returns-255.patch
- 95fcoe-uefi: Test for EFI firmware (bnc#882412)
* Add: 0068-95fcoe-uefi-Test-for-EFI-firmware.patch
Fri Jun 13 14:00:00 2014 hareAATTsuse.de
- Rename patches to match git repository:
* Old: more-fips-adjustments.patch
* New: 0057-01fips-Include-some-more-hmacs.patch
* Old: dracut-check-supported.patch
* New: 0058-dracut-add-warning-when-including-unsupported-module.patch
- Add 99suse module to git repository:
* Remove: parse-suse-initrd.sh
* Remove: module-setup-initrd.sh
* Add: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch
- Add write-ifcfg-suse.sh to git repository:
* Remove: write-ifcfg-suse.sh
* Add: 0060-45ifcfg-Add-SUSE-specific-write-ifcfg-file.patch
- Fixup error messages in write-ifcfg-suse.sh (bnc#881286)
* Add: 0061-45ifcfg-Fixup-error-message-in-write-ifcfg-suse.patch
- Add missing \'libgcc_s.so\' library (bnc#881692):
* Add: 0062-95iscsi-Install-libgcc_s-library.patch
* Add: 0063-90multipath-Install-libgcc_s-library.patch
- Install missing scsi_dh_alua module (bnc#871617)
* Add: 0064-90kernel-modules-install-scsi_dh_alua.patch
- 95iscsi: fixup bnx2i offload booting (bnc#855747)
* Add: 0065-95iscsi-Fixup-bnx2i-offload-booting.patch
Wed Jun 11 14:00:00 2014 jeffmAATTsuse.com
- Add option to warn if unsupported modules are added to the initramfs
- Enable this option for \'make install\' when a kernel with
CONFIG_SUSE_KERNEL_SUPPORTED enabled is used. (bnc#882332)
- Add dracut-check-supported.patch
Wed Jun 11 14:00:00 2014 meissnerAATTsuse.com
- include the several hmacs needed for FIPS integrity checking
of cryptsetup, libgcrypt, libfipscheck1. Also add the openssl
HMACs too as someone else seems to use those too.
Add: more-fips-adjustments.patch
Wed Jun 4 14:00:00 2014 hareAATTsuse.de
- Rediff patches to match git repository
- 95fcoe: Check for FCoE devices prior to binaries
* Modify 0055-95fcoe-Only-install-fcoe-module-if-required.patch
- 99base: Install chown instead of chgrp
* Modify 0052-99base-Add-chown-binary.patch
- 95iscsi: do not try to detect iSCSI firmware during booting;
should be handled via commandline parameter
* Modify 0030-95iscsi-Autodetect-iSCSI-firmware.patch
- Rename patch:
* old: 0051-mkinitrd-suse-add-update-booloader-message.patch
new: 0051-mkinitrd-suse-add-update-bootloader-message.patch
Wed Jun 4 14:00:00 2014 hareAATTsuse.de
- Rename patches to match git repository:
* old: 0013-Correct-paths-for-openSUSE.patch
new: 0011-Correct-paths-for-openSUSE.patch
* old: 0014-Check-for-plymouth-lib-directories.patch
new: 0012-Check-for-plymouth-lib-directories.patch
* old: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
new: 0013-mkinitrd-suse-do-not-update-bootloader-if-no-kernel-.patch
* old: suse_grub_manpage.patch
new: 0014-Update-dracut-manpage-for-GRUB-Legacy-and-GRUB2.patch
* old: replace_dhclient_with_wickedd_dhcp_supplicants.patch
new: 0015-40network-replace-dhclient-with-wickedd-dhcp-supplic.patch
* old: 0015-add-new-s390x-specific-rule-files.patch
new: 0016-Add-new-s390x-specific-rule-files.patch
* old: change_write_ifcfg_to_suse.patch
new: 0017-45ifcfg-use-distro-specific-scripts.patch
* old: dracut-fix-whitespace-add-drivers_call.patch
new: 0018-mkinitrd-suse-Fix-whitespaces-when-adding-drivers.patch
* old: wait_for_network_race_condition_fix.patch
new: 0019-40network-Fix-race-condition-when-wait-for-networks.patch
* old: dracut-warpclock_module.patch
new: 0020-00warpclock-Set-correct-timezone.patch
* old: s390-dcssblk.patch
new: 0021-95dcssblk-Add-new-module-for-DCSS-block-devices.patch
* old: dracut-install-persistent-rule.patch
new: 0022-95udev-rules-add-persistent-network-rule.patch
* old: dracut-really-always-add-autofs4.patch
new: 0023-systemd-always-tries-to-load-autofs4.patch
* old: mdraid-setup.patch
new: 0024-Fixup-mdraid-setup.patch
* old: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch
new: 0025-95udev-rules-Add-59-scsi-sg_utils.rules.patch
* old: 0016-90multipath-add-67-kpartx-compat.rules.patch
new: 0026-90multipath-add-67-kpartx-compat.rules.patch
* old: 0017-90multipath-install-dracut-specific-service-file.patch
new: 0027-90multipath-install-dracut-specific-service-file.patch
* old: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch
new: 0028-95udev-rules-Include-correct-sg3_utils-rules.patch
* old: 0021-90multipath-install-correct-multipath-rules.patch
new: 0029-90multipath-install-correct-multipath-rules.patch
* old: add_dracuts_network_params_for_iscsi.patch
new: 0030-95iscsi-Autodetect-iSCSI-firmware.patch
* old: 0022-90multipath-Fixup-service-file-for-booting.patch
new: 0031-90multipath-Fixup-service-file-for-booting.patch
* old: 0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
new: 0032-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
* old: 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
new: 0033-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
* old: 0025-dracut_continue_adding_modules_also_on_error.patch
new: 0034-dracut-Do-not-stop-installing-drivers-if-one-fails.patch
* old: 0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch
new: 0035-Introduce-force-drivers-parameter-and-force_drivers-.patch
* old: 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
new: 0036-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
* old: 0028-95fcoe-update-fcoe-interface-check.patch
new: 0037-95fcoe-update-fcoe-interface-check.patch
* old: 0029-95fcoe-start-lldpad-separately.patch
new: 0038-95fcoe-start-lldpad-separately.patch
* old: 0030-dracut-mkinitd_cleanup_force_host_only_var.patch
new: 0039-Remove-force-parameter-from-mkinitrd.patch
* old: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
new: 0040-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
* old: 0033-dracut_hostonly_hostonly_cmdline_default.patch
new: 0041-mkinitd-suse-remove-hostonly-and-hostonly-cmdline.patch
* old: 0034-suse.conf.example_extend.patch
new: 0042-Enhance-suse.conf-example-with-SUSE-specific-setting.patch
* old: 0035-always_add_network.patch
new: 0043-40network-always-add-network-module.patch
* old: 0036-add_extra_debug_binaries.patch
new: 0044-Add-find-to-debug-binaries.patch
* old: 0037-fix_s390_network_modules_install.patch
new: 0045-40network-add-missing-_arch-variable-declaration.patch
* old: 0038-remove_waiting_for_swap_dev.patch
new: 0046-dracut-Do-not-wait-for-swap-device.patch
* old: 0039-s390_no_resume_module.patch
new: 0047-95resume-skip-module-for-s390-x.patch
* old: 0041-only_enable_network_if_explicitly_requested.patch
new: 0048-40network-Only-enable-network-interfaces-if-explicit.patch
* old: 0042-ibft_autoconfig_param.patch
new: 0049-95iscsi-Use-ip-ibft-for-ibft-autoconfiguration.patch
* old: 0043-fcoe_strip_quotes.patch
new: 0050-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch
* old: 0044-Add_update_bootloader_msg.patch
new: 0051-mkinitrd-suse-add-update-booloader-message.patch
* old: 0045-add-chown_binary.patch
new: 0052-99base-Add-chown-binary.patch
* old: dracut-fips-module-loading-fixes.patch
new: 0053-01fips-fixup-loading-issues.patch
* old: 0046-ibft_update_cmdline_printing.patch
new: 0054-95iscsi-update-commandline-printing.patch
* old: 0047-only_install_fcoe_if_required.patch
new: 0055-95fcoe-Only-install-fcoe-module-if-required.patch
* old: 0048-cio_ignore.patch
new: 0056-81cio_ignore-handle-cio_ignore-commandline.patch
Mon Jun 2 14:00:00 2014 trennAATTsuse.de
- Mount zipl device on S390 (bnc#874902)
Add 0048-cio_ignore.patch
Mon Jun 2 14:00:00 2014 trennAATTsuse.de
- Only install fcoe if required
and suppress require-binaries output
Add 0047-only_install_fcoe_if_required.patch
- ibft: Correctly show ibft cmdline via print-cmdline
Add 0046-ibft_update_cmdline_printing.patch
Mon Jun 2 14:00:00 2014 meissnerAATTsuse.com
- dracut-fips-module-loading-fixes.patch: bnc#875855
- adjust FIPS module list
- on architecture specific modules, failing loading is not
critical
- ship 98selinux, for people that want to use SELinux.
Wed May 28 14:00:00 2014 trennAATTsuse.de
- Update to latest git HEAD: commit 0fa5dbedc5b222435f51f7460a81232ee120c4e1
Tue May 20 13:23
Modified dracut_v37_to_HEAD.patch
Modified mdraid-setup.patch
Modified dracut-install-persistent-rule.patch
Removed 0032-98systemd-fixup-rootfs-generator-installation-path.patch
- Add /etc/dracut.d.conf/01-dist modifications to file instead of writing
to it via rpm build section
Add 0033-dracut_hostonly_hostonly_cmdline_default.patch
Add 0034-suse.conf.example_extend.patch
- Cleanup mkinitrd-suse.sh:
* Remove hostonly and hostonly-cmdline -> this is done via 01-dist config
file now
- Always add network module based on modules_setup.sh check() function and not
via 01-dist config file
Add 0035-always_add_network.patch
- Add find to debug binaries - Useful and harmless
Add 0036-add_extra_debug_binaries.patch
- Fix adding of network modules for s390 (bnc#879302)
Add 0037-fix_s390_network_modules_install.patch
- Omit resume module on s390(x) - There is no suspend on s390
Add 0039-s390_no_resume_module.patch
- Do not wait for swap - This causes trouble with Rudi\'s autobuild images:
Add 0038-remove_waiting_for_swap_dev.patch
- Fcoe and ibft fixes (bnc#879038):
Add 0041-only_enable_network_if_explicitly_requested.patch
Add 0042-ibft_autoconfig_param.patch
Add 0043-fcoe_strip_quotes.patch
- Print message when starting to update bootloader
Add 0044-Add_update_bootloader_msg.patch
- ToDo: Pass hostonly variable earlier so that is always avail in check()
function. Still already add:
Add 0040-fcoe_fix_check_function.patch
- Add chown to initrd (bnc#879767)
Add 0045-add-chown_binary.patch
- Use parallel pixz instead of xz binary to compress the initrd
Tue May 20 14:00:00 2014 trennAATTsuse.de
- From Hannes Reinecke :
fixup rootfs-generator installation path (bnc#878714)
Add 0032-98systemd-fixup-rootfs-generator-installation-path.patch
Mon May 19 14:00:00 2014 trennAATTsuse.de
- Corrected previous patch
Modified: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
Mon May 19 14:00:00 2014 trennAATTsuse.de
- From Hannes Reinecke :
skip VLAN devices in fcoe-up (bnc#878583)
Add: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
Thu May 15 14:00:00 2014 trennAATTsuse.de
- By Hannes Reinecke :
- Fixup FCoE booting (bnc#877288)
* Add 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
* Add 0028-95fcoe-update-fcoe-interface-check.patch
* Add 0029-95fcoe-start-lldpad-separately.patch
- Cleanup host_only variable using in mkinitrd
- Remove --force parameter from mkinitrd, we always force anyway
* Add 0030-dracut-mkinitd_cleanup_force_host_only_var.patch
- Remove acpi parameter from mkinitrd, this is done differently nowadays
- Adjust manpage accordingly
Wed May 14 14:00:00 2014 meissnerAATTsuse.com
- also do the service magic in %post/%postun, otherwise
purge-kernels will not get enabled.
Wed May 7 14:00:00 2014 trennAATTsuse.de
- Do not inst binaries explicitly into /bin or /usr/bin, it is already taken
care of internally for that:
Delete 0006-Install-bin-mount.patch
Modify 0013-Correct-paths-for-openSUSE.patch
- Do not stop trying to load drivers (via add-drivers or filesystems) if one
fails
Add 0025-dracut_continue_adding_modules_also_on_error.patch
- Introduce force-drivers. mkinitrd should use this one instead of add-drivers
later, if accepted mainline
Add
0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch
Mon May 5 14:00:00 2014 hareAATTsuse.de
- Update add_dracuts_network_params_for_iscsi.patch to detect
be2iscsi firmware devices
- Remove obsolete patch fix-iscsi-firmware.sh
- Fixup iscsi firmware booting with be2iscsi (bnc#873448):
Added 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
- Renamed mkinird_differ_host_and_cmdline_only_properly.patch to
0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
Wed Apr 30 14:00:00 2014 trennAATTsuse.de
- Update to lateste git HEAD 48b7ab1b35adf1f3f09f883ef14ea0a3fba1e468
Added: dracut_v37_to_HEAD.patch
Modified: 0013-Correct-paths-for-openSUSE.patch
Modified: mdraid-setup.patch
Modified: replace_dhclient_with_wickedd_dhcp_supplicants.patch
Deleted: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch
Deleted: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch
- Fix lvm and other possible not working thing due to new parameter:
hostonly-cmdline which has to be active by default
bnc#874000 bnc#874905 bnc#874363
Added: mkinird_differ_host_and_cmdline_only_properly.patch
- Make write-ifcfg-suse.sh more update robust
Avoid rebasing of diff with every update touching this file by adding
write-ifcfg-suse.sh as source file and copy/link in .spec file.
Modified: change_write_ifcfg_to_suse.patch
Tue Apr 29 14:00:00 2014 meissnerAATTsuse.com
- consolidate -fips-aesni into -fips again. The problem due to it
was split off upstream was solved in the kernel.
Fri Apr 25 14:00:00 2014 meissnerAATTsuse.com
- Create new -fips and -fips-aesni subpackage for kernel
integrity checking. bnc#856310 FATE#316930
- add spaces around \"network\" in 01-dist.conf, as the addmodules
list is concatenated and you never know which config is before or
after and what it does.
Wed Apr 16 14:00:00 2014 hareAATTsuse.de
- Enable multipath correctly during booting (bnc#873686)
Add: 0022-90multipath-Fixup-service-file-for-booting.patch
Mon Apr 14 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- fix-iscsi-firmware.patch:
Fix according to dracut-037 updates (iscsistarted-iscsi:).
Mon Apr 14 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- add_dracuts_network_params_for_iscsi.patch:
Add missing dracut\'s cmdline parameters to make network mandatory
and boot using iBFT when present. Without them iBFT booting does
not work.
Fri Apr 11 14:00:00 2014 hareAATTsuse.de
- Install correct rule files for multipath support (bnc#873151)
Add: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch
Add: 0021-90multipath-install-correct-multipath-rules.patch
Thu Apr 10 14:00:00 2014 trennAATTsuse.de
- Do not always try to add iscsi module, let its check function decide
- Compress initrd with xz --check=crc32 -6 by default
Wed Apr 9 14:00:00 2014 crrodriguezAATTopensuse.org
- Remove the bootchart module, note that we still keep
the systemd-bootchart one which provides similar functionality.
Wed Apr 9 14:00:00 2014 crrodriguezAATTopensuse.org
- Remove the busybox module we have all basic tools already
in the initrd
- _unitdir is always defined nowadays, remove the conditionals.
Wed Apr 9 14:00:00 2014 sfalkenAATTopensuse.org
- Replaced dracut tarball with proper upstream tarball
Add: dracut-037.tar.xz
Tue Apr 8 14:00:00 2014 hareAATTsuse.de
- Update dracut to 037
* Add --hostonly_cmdline switch
* Update --mount syntax
* Include modules from /updates directory
* Fixes for network setup
* Some small fixes
- Rediff patches
- Include iscsiuio again (bnc#872474)
Remove: remove-iscsiuio.patch
- Install 59-scsi-sg_utils.rules (bnc#872478)
Add: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch
- Install 67-kpartx-compat.rules (bnc#872662)
Add: 0016-90multipath-add-67-kpartx-compat.rules.patch
- Install separate multipath service file (bnc#871610)
Add: 0017-90multipath-install-dracut-specific-service-file.patch
- Do not fsck and mount from fstab if systemd is used (bnc#
Add: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch
- Fixup initqueue for remote-fs
Add: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch
Thu Apr 3 14:00:00 2014 crrodriguezAATTopensuse.org
- revert last change, ucode-intel is not mandatory and
will get installed by default anyway, either via patterns
or by modalias dependencies in the package itself.
Thu Apr 3 14:00:00 2014 crrodriguezAATTopensuse.org
- Require package ucode-intel in x86
*
Tue Apr 1 14:00:00 2014 nfbrownAATTsuse.com
- mdraid-setup.patch
Make mdraid scripts work with latest mdadm.
Without this, boot from DDF or IMSM array fails if
one device is missing (bnc#866660)
Fri Mar 28 13:00:00 2014 trennAATTsuse.de
- systemd always tries to load autofs4 otherwise it reports:
Failed to insert module \'autofs4\'
dracut already adds it, but only if loaded already.
Always load autofs4 even if not already loaded (bnc#869411)
Add: dracut-really-always-add-autofs4.patch
Tue Mar 25 13:00:00 2014 trennAATTsuse.de
- Fix installkernel script bnc#862990
Fri Mar 14 13:00:00 2014 rmilasanAATTsuse.com
- Add support for 70-persistent-net.rules in dracut (bnc#868375)
Add: dracut-install-persistent-rule.patch
Fri Mar 14 13:00:00 2014 trennAATTsuse.de
- CRITICAL: Fix add-drivers passing from mkinitrd to dracut bnc#868397
Wed Mar 12 13:00:00 2014 trennAATTsuse.de
- Add s390 dcssblk driver and introduce rd.dcssblk= to pass mounts that should
get activated at initrd stage fate#308263
Add: s390-dcssblk.patch
Fri Mar 7 13:00:00 2014 trennAATTsuse.de
- bnc#830060 - Dracut is missing warpclock/hwclock
Add dracut-warpclock_module.patch
Wed Mar 5 13:00:00 2014 pwieczorkiewiczAATTsuse.com
- wait_for_network_race_condition_fix.patch:
* In case of no network related params are specified, but rd.neednet=1
is set, default initqueue action is to wait until one of the network
interfaces is marked as set up properly. (bnc#866771)
* It also helps with initqueue\'s race condition when network interface
shows up late.
- replace_dhclient_with_wickedd_dhcp_supplicants.patch:
Add a missing network setup flag. (bnc#866771)
Mon Mar 3 13:00:00 2014 trennAATTsuse.de
- Merge all dracut-
* packages to one dracut.rpm package.
Subpackages only had one or two minor files not worth splitting a package
or dracut-network had important modules which should (like former main
dracut package) always get installed
- libcap does not exist and libcap2 or friends are not needed
- > remove Requires: libcap
- Reorder (sort) the files section a bit
Mon Mar 3 13:00:00 2014 trennAATTsuse.de
- Fix bug introduced with last commit: Bad whitespace logic when
INITRD_MODULES contain more than one module.
Thu Feb 27 13:00:00 2014 trennAATTsuse.de
- Make sure that --add-drivers is not called with whitespace string which
will lead to a \"read line\" user input request and things may get stuck at
installation.
- Add: dracut-fix-whitespace-add-drivers_call.patch
- Remove s390 grub module again -> this will go into grub2 package
(ask rwAATTsuse.de for details)
Delete/remove: s390_add-user-space-grub-rule.patch
- Add installkernel script which installs the kernel when:
make install
is invoked. The script from mkinitrd has been taken over and adopted.
Added source: dracut-installkernel
bnc#862990
Fri Feb 21 13:00:00 2014 trennAATTsuse.de
- Fix syntax error -> missing then
- Correct path, it is /usr/bin/grub2-emu
Mon Feb 17 13:00:00 2014 trennAATTsuse.de
- autofs4 is always included since mainline git commit: 314929920f27448b45bfd
systemd: ensure autofs4 and ipv6 are included
- Always add network and iscsi dracut module, so that ibft, iscsi, nfsroot
work as expected.
Fri Feb 14 13:00:00 2014 pwieczorkiewiczAATTsuse.com
- change_write_ifcfg_to_suse.patch:
Detect the system flavor and write the ifcfg files accordingly.
Fri Feb 14 13:00:00 2014 trennAATTsuse.de
Originally by Hannes Reinecke (hareAATTsuse.de):
- Install new s390x specific udev rules (bnc#856585)
- Add: 0015-add-new-s390x-specific-rule-files.patch
- Do not check for non-existing dasd_configure for s390x (bnc#856585)
Thu Feb 13 13:00:00 2014 jjollyAATTsuse.com
- Added 95grub2 module for s390x
Thu Feb 13 13:00:00 2014 pwieczorkiewiczAATTsuse.com
- remove-iscsiuio.patch:
Remove iscsiuio references as this one is not present in SLE-12.
Thu Feb 13 13:00:00 2014 pwieczorkiewiczAATTsuse.com
- fix-iscsi-firmware.patch:
Fix iSCSI iBFT boot up problem introduced with mainline changes
Thu Feb 13 13:00:00 2014 pwieczorkiewiczAATTsuse.com
- replace_dhclient_with_wickedd_dhcp_supplicants.patch:
Replace dhclient with wickedd-dhcp4 and wickedd-dhcp6. Script up dhcp
functionality in ifup.sh.
Thu Feb 13 13:00:00 2014 sfalkenAATTopensuse.org
-Added bug number to previous changelog entry
Thu Feb 13 13:00:00 2014 sfalkenAATTopensuse.org
-Updated suse_grub_manpage.patch to further correct for incorrect grub configuration paths
bnc#858448
Wed Feb 12 13:00:00 2014 sfalkenAATTopensuse.org
-Updated suse_grub_manpage.patch for dracut-036
Wed Feb 12 13:00:00 2014 sfalkenAATTopensuse.org
-Added patch to fix manpage to reflect openSUSE GRUB Legacy and GRUB2
- removed patches:
* dracut_git_v034_to_head.patch
Sun Feb 9 13:00:00 2014 tchvatalAATTsuse.com
- Cleanup with spec-cleaner.
Sun Feb 9 13:00:00 2014 tchvatalAATTsuse.com
- Version bump to 036 removing the need for patching from git.
- removed patch:
* dracut_git_v034_to_head.patch
Fri Jan 31 13:00:00 2014 trennAATTsuse.de
- Do not show usage error when no kernel was found.
This may happen several times at package installation time and floods
the logs.
Modify dracut_do_not_update_booloader_if_no_kernel_is_found.patch
Tue Jan 14 13:00:00 2014 trennAATTsuse.de
- Correctly fix previous issue:
Exit without calling update-bootloader (bnc#858268)
Currently mkinitrd will always exit early without creating an initrd at all.
Rebase: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
- Remove an obsolete comment from .spec file
Mon Jan 13 13:00:00 2014 trennAATTsuse.de
Exit without calling update-bootloader (bnc#858268):
Add: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
Adding:
Requires: systemd-sysvinit
which has reboot, halt and other binaries dracut likes to add to the initrd.
Cleanup and adjust to latest mainline:
Dropping as these are included in the latest update_git_v034_to_head patch:
Drop: 0001-95dasd-Install-kernel-modules-only-once.patch
Drop: 0002-95dasd-Only-install-module-if-normalize_dasd_arg-is-.patch
Drop: 0003-95dasd_mod-make-dasd_cio_free-optional.patch
Drop: 0004-95zfcp-Make-installation-optional.patch
Drop: 0005-95znet-Make-installation-optional.patch
Drop: 0007-Fixup-keymap-setting-for-openSUSE.patch
Drop: 0008-Add-DASD-configuration-for-SuSE.patch
Drop: 0009-Add-zfcp-scripts-for-SUSE.patch
Drop: 0010-Make-logfile-configurable.patch
Drop: 0011-mkinitrd-suse-Add-SUSE-compability-wrapper-for-dracu.patch
Drop: 0012-mkinitrd-suse.8.asc-Add-manpage-for-SUSE-compat-mkin.patch
Drop: 0015-Fixup-script-permissions.patch
Drop: 0016-Remove-shebang-from-shell-completion-files.patch
Drop: dracut-git-update.patch
Rebase: 0013-Correct-paths-for-openSUSE.patch
This is a rename of dracut-git-update.patch to:
Add: dracut_git_v034_to_head.patch
Fri Dec 20 13:00:00 2013 trennAATTsuse.de
- Cleanup: Remove %define replace_mkinitrd 1
and related conditionals in .spec file -> One either has to install
dracut or mkinitrd and it will stay like that.
Wed Dec 18 13:00:00 2013 trennAATTsuse.de
- Add purge kernel service/feature which before was part of mkinitrd
bnc#854348
Thu Nov 28 13:00:00 2013 hareAATTsuse.de
- Update with patches from git repository:
* kernel-modules: add ohci-pci to the list of forced module installs
* Run \'xz\' and \'lzma\' with multiple threads
* systemd: do not exit the initqueue, if systemd asks a password
* iscsi,nbd: do not fail in hostonly mode
* dracut-functions.sh: Avoid loading unnecessary 32-bit libraries
for 64-bit initrds
* fips: also install /etc/system-fips in the initramfs
* dracut.modules.7.asc: removed empty section
* dracut.sh: fixed PATH shortener
* dracut.spec: move /sbin/dracut to /usr/sbin/dracut
* iscsi/nbd: do not try to mount the whole disk, if root= is missing
* fips: include crct10dif_generic
* Handle crypto modules with and without modaliases
* usrmount/module-setup.sh: fixed typo
* lvm: always install thin utils for lvm
* kernel-modules(ARM): add mmc_block usb_storage to static list of
kernel mods
* dracut-functions.sh:check_block_and_slaves
*() skip LVM internal devs
* mkdir basic dirs in /run
* network/fcoe: only redirect output to loginit.pipe, if exists
* dracut.sh: no need to make subdirs in run
* dracut.sh: also mkdir /run/lock, which is copied to
* lvm: fix thin recognition
* Add lzo, lz4 compression and read INITRD_COMPRESS
* remove resume-genrules.sh
* resume: fix swap detection in hostonly
* base/init.sh: also mkdir /run/lock
* dmsquash-live: add /dev/mapper/live-base
* Doc: cleanup, extend and split and reuse
* dracut.sh: do not bail out, if kernel modules dir is missing
* 10i18n/parse-i18n.sh: parse rd.vconsole and rd.locale
*
*/module-setup.sh: add comments for dracut called functions
* lvm: install thin utils for non-hostonly
- Patches for S/390 support
* 95dasd: Install kernel modules only once
* 95dasd: Only install module if normalize_dasd_arg is present
* 95dasd_mod: make dasd_cio_free optional
* 95zfcp: Make installation optional
* 95znet: Make installation optional
* Install /bin/mount
* Fixup keymap setting for openSUSE
* Add DASD configuration for SuSE
* Add zfcp scripts for SUSE
* Make logfile configurable
* Add SUSE compability wrapper for dracut
* Add manpage for SUSE compat mkinitrd
* Work around xsltproc bug
* Correct paths for openSUSE
* Check for plymouth lib directories
- Drop obsolete patches
- Install mkinitrd-suse
Mon Oct 21 14:00:00 2013 hrvoje.senjanAATTgmail.com
- Remove not needed logrotate Requires
Thu Oct 17 14:00:00 2013 crrodriguezAATTopensuse.org
- remove use_all_paths_udev.patch, /lib/udev.. is a symlink
to /usr nowadays this confuses other parts of the code causing
errors/warnings during the initrd generation.
Mon Oct 14 14:00:00 2013 crrodriguezAATTopensuse.org
- version 034
* fcoe: add FCoE UEFI boot device support
* rootfs-block: add support for the rootfallback= kernel
cmdline option
* btrfs: use inst_hook to install the timeout hook
Sun Oct 13 14:00:00 2013 tittiatcokeAATTgmail.com
- Correct patch mkinitrd-fix-boot-dir-detection. (\";;\" doesn\'t
really work)
Wed Oct 9 14:00:00 2013 tittiatcokeAATTgmail.com
- Updated the patch mkinitrd-fix-boot-dir-detection.patch to a
more generic validation that the inidcated initrd file doesn\'t
contain a path. If no path is given, then add the default
boot_dir.
Tue Oct 8 14:00:00 2013 tittiatcokeAATTgmail.com
- Fix again the mkinitrd script as that people don\'t seem to test.
Added mkinitrd-fix-boot-dir-detection.patch so that an initrd
is created.
Mon Oct 7 14:00:00 2013 trennAATTsuse.de
- Update to mainline git version 033, b7d1b6f904a5b0bdd9a5ad19149f3.
- Remove all patches which went mainline:
generalize_early_cpio.patch
microcode_cleanup.patch
acpi_override.patch
mkinitrd_allow_no_option.patch
mkinitrd_allow_multiple_args.patch
quiet_options.patch
implement_default.patch
root_fs.patch
suse_host_only.patch
- Fix missing root fs slash in lib/udev/rules.d resulting in:
/var/tmp/initramfs.Lusf6flib/udev/rules.d
- bcache: removed, it\'s in the upstream bcache-tools package
mainline git commit: 49268028b90f6344f79e3510d2
- Fix bad she-bang in mkinitrd_setup_dummy
Fri Oct 4 14:00:00 2013 tittiatcokeAATTgmail.com
- Add patch mkinitrd_update_bootloader.diff so that after
generating the initrd, the update-bootloader is called to update
grub2.
Fri Oct 4 14:00:00 2013 tittiatcokeAATTgmail.com
- Validate that the parameters passed with -i (initrd file) does
not already contain the boot_dir.
Fri Oct 4 14:00:00 2013 tittiatcokeAATTgmail.com
- Bring back the versioned Provides/Obsoletes for mkinitrd.
Otherwise we run into issues as that udev is conflicting with
mkinitrd < 2.7.0
Wed Oct 2 14:00:00 2013 trennAATTsuse.de
- Remove Provides/Obsoletes: mkinitrd versioning.
Simply obsolete and provide all mkinitrd versions.
Wed Oct 2 14:00:00 2013 mvyskocilAATTsuse.com
- Mark /etc/dracut.conf.d/02-early-microcode.conf as config file
Wed Sep 25 14:00:00 2013 trennAATTsuse.de
- Add ACPI table override ability:
generalize_early_cpio.patch #PATCH-FIX-UPSTREAM
microcode_cleanup #PATCH-FIX-UPSTREAM
acpi_override.patch #PATCH-FIX-UPSTREAM
- This will replace mkinitrd with dracut as the default initrd generator.
Therefore Prefer: dracut tag in the project config of the repo is needed.
Otherwise OSC does not know how to build installation-images
(needing mkinitrd to build) and which package to take.
- To switch back and try mkinitrd instead of dracut will be:
Uninstall dracut:
- rpm -e dracut --nodeps
And install mkinitrd again:
- zypper install mkinitrd
- Adjust mkinitrd-dracut.sh to SUSE mkinitrd:
: Before gives a \"usage\" error -> now scans /boot for kernels
and builds corresponding inirtrds for them
- i -k : Pass a list of kernels and initrd targets
(not sure it was worth the hassle to be able to pass)
- b : Boot directory to search for kernel images
- d : Change root file system. Not tested whether dracut\'s behavior
matches exactly what our mkinitrd does.
- s : Dummy (should even be obsolete in latest mkinitrd)
These patches have been submitted, but now feedback from mainline yet:
mkinitrd_allow_no_option.patch
mkinitrd_allow_multiple_args
quiet_options
implement_default
root_fs
suse_host_only
- Write caller and used parameters to syslog if mkinitrd is called.
So that those can easily be fixed and checked for correctness.
This should get reverted again before a bigger release.
This patch will never show up mainline and should also get reverted
from SUSE factory repo before the next release shows up:
suse_only_logger
- Build host only images for default paths in SUSE for faster build and
smaller images. Imply --force in this case as well.
* suse_host_only.patch
Sat Sep 21 14:00:00 2013 crrodriguezAATTopensuse.org
- save a few seconds on boot by always including the autofs4
kernel module in the initrd
Sat Sep 21 14:00:00 2013 crrodriguezAATTopensuse.org
- dracut 033
- improved hostonly device recognition
- improved hostonly module recognition
- do not install udev rules from /etc in generic mode
- fixed LABEL= parsing for swap devices
- fixed iBFT network setup
- removed caching of kernel cmdline
- bcache: support new blkid
- ifup with dhcp, if no \"ip=\" specified for the interface
- fixed ifup udev rules
Mon Sep 9 14:00:00 2013 crrodriguezAATTopensuse.org
- After testing, we need to correct a major problem, /usr/bin/mount
most be installed in /bin/mount on the initrd otherwise boot fails.
Mon Sep 9 14:00:00 2013 crrodriguezAATTopensuse.org
- version 032
- add parameter --print-cmdline
- dracut now creates the initramfs without udevadm
that means the udev database does not have to populated
and the initramfs can be built in a chroot with
/sys /dev /proc mounted.
- renamed dracut_install() to inst_multiple() for consistent naming
- if $libdirs is unset, fall back to ld.so.cache paths
- always assemble /usr device in initramfs
- bash module added (disable it, if you really want dash)
- continue to boot, if the main loop times out, in systemd mode
- removed inst
*() shell pure versions, dracut-install binary is in charge now
- fixed ifcfg file generation for vlan
- do not include adjtime and localtime anymore
- fixed generation of zfcp.conf of CMS setups
- install vt102 terminfo
- dracut_install() is still there for backwards compat
- do not strip files in FIPS mode
- fixed iBFT interface configuration
- fs-lib: install fsck and fsck.ext
*
- shutdown: fixed killall_proc_mountpoint()
- network: also wait for ethernet interfaces to setup
- fixed checking for FIPS mode
Mon Aug 5 14:00:00 2013 crrodriguezAATTopensuse.org
- version 031_git201308011055
* systemd: add support for kmod static devnodes
* crypt: Wait for udev to settle before unlocking disk
* systemd/dracut-pre-trigger.service: run after systemd-tmpfiles-setup-dev
* systemd: use systemd in the initramfs, if installed on the system
Sat Aug 3 14:00:00 2013 tittiatcokeAATTgmail.com
- Drop the buildrequire for the microcode_ctl. This package
is no longer in Factory and with the latest kernel (3.11)
no longer required.
Sun Jul 28 14:00:00 2013 crrodriguezAATTopensuse.org
- version 030_git201307241235
* systemd: Replace prefdm.service with display-manager.service
* modsign: do not install, if no keys present
* bcache: add support for bcache
* Use systemd-cat for logging on systemd systems, if logfile is empty
Sun Jul 21 14:00:00 2013 tittiatcokeAATTgmail.com
- Remove the http link for the Source0. Git snapshots can
not be obtained that way.
Wed Jul 17 14:00:00 2013 crrodriguezAATTopensuse.org
- Version 029_git201307171236
* support early microcode loading in x86
Thu Jun 27 14:00:00 2013 crrodriguezAATTopensuse.org
- Require pigz instead of gzip
Tue Jun 18 14:00:00 2013 crrodriguezAATTopensuse.org
- version 029
* fixes for the networking modules
* fixes for systemd integration
* fixes for the i18n module (removes dracut-font.patch now upstream)
Thu Jun 6 14:00:00 2013 crrodriguezAATTopensuse.org
- version 027_git201306061213
* setup correct system time and time zone in initrd
* systemd integration bugfixes
* lvm bugfixes.
Wed May 8 14:00:00 2013 crrodriguezAATTopensuse.org
- Recommend pigz for faster/parallel compression
Sat Apr 20 14:00:00 2013 crrodriguezAATTopensuse.org
- Ensure we use display-manager.service instead of prefdm.
Mon Apr 15 14:00:00 2013 crrodriguezAATTopensuse.org
- Update to 027_git201304121327
* much of patch correct-paths-for-opensuse.patch is no longer
need so it has shrinked significantly.
* since PRE-027 dracut requires systemd >= 199 reflect that in
in the rpm buildRequires.
Wed Apr 3 14:00:00 2013 tittiatcokeAATTgmail.com
- dracut-027
* systemd module now requires systemd >= 199
* dracut makes use of native systemd initrd units
* added hooks for new-kernel-pkg and kernel-install
* hostonly is now default for fedora
* comply with the BootLoaderSpec paths
http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
* added rescue module
* host_fs_types is now a hashmap
* new dracut argument \"--regenerate-all\"
* new dracut argument \"--noimageifnotneeded\"
* new man page dracut.bootup
* install all host filesystem drivers
* use -D_FILE_OFFSET_BITS=64 to build dracut-install
Tue Mar 19 13:00:00 2013 crrodriguezAATTopensuse.org
- Update to 026_git201303180829
* bugfixes
* adds bash completion Support
- Most importantly, fix the (silly) compatibility patch
that changes the name from initramfs to initrd that went broken
in last update (all initrds were suffixed by .img)
Tue Mar 12 13:00:00 2013 crrodriguezAATTopensuse.org
- dracut-026
- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory
/usr/lib/dracut/dracut.conf.d/
*.conf can be overwritten by the same
filenames in /etc/dracut.conf.d.
Packages should use /usr/lib/dracut/dracut.conf.d rather than
/etc/dracut.conf.d for drop-in configuration files.
/etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.
- uses systemd-198 native initrd units
- totally rely on the fstab-generator in systemd mode for block devices
- dracut systemd now uses dracut.target rather than basic.target
- dracut systemd services optimize themselves away
- fixed hostonly parameter generation
- turn off curl globbing (fixes IPv6)
- modify the udev rules on install and not runtime time
- enable initramfs building without kernel modules (fixed regression)
- in the initqueue/timeout,
reset the main loop counter, as we see new udev events or initqueue/work
- fixed udev rule installation
Fri Feb 22 13:00:00 2013 crrodriguezAATTopensuse.org
- Update to 025_git201302211113
* Support out-of-tree and updated drivers in initramfs creation
* shutdown: call \"losetup -D\" on shutdown
* Mount /proc before including dracut-lib.sh.
* dracut.sh: make /var/log a symlink to /run/log
* systemd/dracut-pre-pivot.sh: remove /dev/root symlink after shell
* kernel-modules: Add ehci support for kernel 3.8+
* Other bugfixes
Sun Feb 3 13:00:00 2013 crrodriguezAATTopensuse.org
- BuildRequires: pkgconfig(systemd) so %{_unitdir} is defined
and systemd integration works..
Mon Jan 28 13:00:00 2013 crrodriguezAATTopensuse.org
- Require modutils instead of module-init-tools.
Thu Jan 24 13:00:00 2013 hrvoje.senjanAATTgmail.com
- Update to release 025:
+ do not strip signed kernel modules
+ add sosreport script and generate /run/initramfs/sosreport.txt
+ make short uuid specification for allow-discards work
+ turn off RateLimit for the systemd journal
+ fixed MAC address assignment
+ add systemd checkisomd5 service
+ splitout drm kernel modules from plymouth module
+ add \'swapoff\' to initramfs to fix shutdown/reboot
+ add team device support
+ add pre-shutdown hook
+ kill all processes in shutdown and report remaining ones
+ \"--device\" changed to \"--add-device\" and \"add_device=\" added
for conf files
+ add memory usage trace to different hook points
+ cope with optional field #7 in /proc/self/mountinfo
+ lots of small bugfixes
Thu Dec 6 13:00:00 2012 crrodriguezAATTopensuse.org
- dracut wants \"strip\" installed which is part of binutils
recommend that package
Mon Nov 5 13:00:00 2012 tittiatcokeAATTgmail.com
- Added additional patches to make dracut work in an openSUSE
environment.
- Added patch (use_all_paths_udev.patch) to use both /usr/lib/udev
and /lib/udev as long as not all packages migrated.
- Added patch (use_initrd_insteadof_initramfs.patch) to change
the naming of the generated initrd file to be more openSUSE
- Added patch (use_sysconfig_values_correctly.patch) to read the
correct keymap value from /etc/sysconfig. (.gz extension)
Thu Nov 1 13:00:00 2012 tittiatcokeAATTgmail.com
- Update to release 024:
+ new dracut option \"--device\"
+ new dracut kernel command line options \"rd.auto\"
+ new dracut kernel command line options \"rd.noverifyssl\"
+ new dracut option \"--kernel-cmdline\" and \"kernel_cmdline\"
option for default parameters
+ fixes for systemd and crypto
+ fix for kexec in shutdown, if not included in initramfs
+ create the initramfs non-world readable
+ prelink/preunlink in the initramfs
+ strip binaries in the initramfs by default now
+ various FIPS fixes
+ various dracut-install fixes
- Added patch (correct-paths-for-opensuse.patch) to ensure correct
paths for openSUSE (Plymouth)
Fri Sep 28 14:00:00 2012 fcrozatAATTsuse.com
- Add initramfs-non-world-readable.patch: fix CVE-2012-4453
(bnc#782734).
Wed Aug 1 14:00:00 2012 fcrozatAATTsuse.com
- Update to release 023:
+ resume from hibernate fixes
+ -N option for --no-hostonly
+ support for systemd crypto handling
+ new dracut module \"crypt-loop\"
+ deprecate the old kernel command line options
+ more documentation
+ honor CFLAGS for dracut-install build
+ multipath fixes
+ / is mounted according to rootflags parameter but forced ro at
first. Later it is remounted according to /etc/fstab +
rootflags parameter and \"ro\"/\"rw\".
+ support for xfs / reiserfs separate journal device
+ new \"ro_mnt\" option to force ro mount of / and /usr
+ root on cifs support
+ dracut-install: fixed issue for /var/tmp containing a symlink
+ only lazy resolve with ldd, if the /var/tmp partition is not
mounted with \"noexec\".
+ i18n: fixed inclusion of \"include\" keymaps
- Drop dracut_makefile_cflags_pass.patch and separate-journal.patch
(merged upstream)
Mon Jul 23 14:00:00 2012 fcrozatAATTsuse.com
- Update to release 022:
+ fixed host-only kernel module bug
- Changes from release 021:
+ fixed systemd in the initramfs (requires systemd >= 187)
+ dracut-install: massive speedup with /var on the same
filesystem with COW copy.
+ dracut-install: moved to /usr/lib/dracut until it becomes a
general purpose toot
+ new options: \"rd.usrmount.ro\" and \"rd.skipfsck\"
+ less mount/umount
+ apply \"ro\" on the kernel command line also to /usr
+ mount according to fstab, if neither \"ro\" or \"rw\" is specified
+ skip fsck for xfs and btrfs. remount is enough
+ give emergency_shell if /usr mount failed
+ dracut now uses getopt:
- options can be position independent now!!
- we can now use --option=
+ added option \"--kver=\", and the image location
can be omitted : dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64
+ dracut.sh: for --include copy also the symbolic links
+ man pages: lsinitrd and mkinitrd added
+ network: We do not support renaming in the kernel namespace
anymore (as udev does that not anymore). So, if a user wants to
use ifname, he has to rename to a custom namespace. \"eth[0-9]+\"
is not allowed anymore.
+ resume: moved the resume process to the initqueue.
This should prevent accidently mounting the root file system.
+ improve running testsuite
- Clean up package to be openSUSE only package and follow openSUSE
standard.
- Add dracut module to convert openSUSE/SLE initrd cmdline
parameters into dracut parameters at boot time.
- Add separate-journal.patch: add support for separate journal for
reiserfs and XFS.
Thu Jul 12 14:00:00 2012 trennAATTsuse.de
- First check in of version 020
- Fix Makefile so that make -e CFLAGS=\"$RPM_OPT_FLAGS\" can be passed
- Remove Requires on libcap
- some more changes, most sent mainline
