Changelog for dracut-037-82.146.x86_64.rpm :

* Wed Feb 08 2017 daniel.molkentinAATTsuse.com- 90multipath: 90multipath: start before local-fs-pre.target (bsc#1005410, bsc#1006118, bsc#1007925)
* add 0323-90multipath-Before-local-fs-pre.patch
* Tue Feb 07 2017 daniel.molkentinAATTsuse.com- 90multipath: Start daemon after udev settle (bsc#986734, bsc#986838, bsc#1005410, bsc#1007925)
* add 0322-90multipath-Start-daemon-after-udev-settle.patch
* Mon Jan 30 2017 astiegerAATTsuse.com- Do not create initramfs with world-readable permissions if early microcode update is used bsc#1008340 CVE-2016-8637
* add 0320-dracut.sh-create-the-initramfs-non-world-readable-al.patch
* Thu Jan 26 2017 daniel.molkentinAATTsuse.com- Allow booting from degrated MD arrays with systemd (bsc#1017695)
* add 0321-Allow-booting-from-degraded-MD-RAID-arrays.patch
* Tue Dec 20 2016 trennAATTsuse.de- Find devices by path for S390x (bsc#915218)
* add s390x_persistent_device.conf
* Fri Dec 16 2016 trennAATTsuse.de- Do not pass ifname for bonding devices (bsc#995812)
* add 0319-nfs_do_not_pass_ifname_for_bonding_devices.patch
* Fri Dec 09 2016 Thomas.BlumeAATTsuse.com- deal with incomplete ibft bootflag settings (bsc#1007648)
* Add: 0318-ibft-fix-boot-flag-check.patch
* Fri Oct 07 2016 trennAATTsuse.de- Give-persistent_policy-precedence-over-dev-mapper-names (bsc#908143)
* Add: 0502-persistent_device_policy_param_enhance.patch
* Thu Sep 29 2016 trennAATTsuse.de- mdadm IMSM_NO_PLATFORM workaround for kdump (bsc#975404)
* Add: 0316-mdraid_add_IMSM_NO_PLATFORM_env.patch
* Wed Aug 31 2016 trennAATTsuse.de- Add missing whitespace for md raid suse kernel param parsing (bsc#970215)
* modify: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch
* Thu Jul 07 2016 lduncanAATTsuse.com- update iscsi module setup: test iscsi for flash directory before continuing, adding (bsc#975959):
* 0315-test-iscsi-for-flash-directory-before-continuing.patch
* Thu Jan 14 2016 pwieczorkiewiczAATTsuse.com- Add 0314-network_set_mtu_macaddr_for_dhcp.patch: - Set MTU and LLADDR for DHCP if specified (boo#959803)
* Wed Nov 11 2015 thomas.blumeAATTsuse.com- wait for netroot until all iBFT interfaces are up (bsc#951003)
* add 0313-ibft-wait-for-session-on-all-paths.patch
* Tue Nov 10 2015 thomas.blumeAATTsuse.com- skip ibft setup via dhcp if dhcp ip is 0.0.0.0 (bsc#953361) Added 0312-iscsi-skip-ibft-invalid-dhcp.patch
* Mon Nov 09 2015 fvogtAATTsuse.com- Modify 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch - Add notice (bsc#952491)
* Mon Nov 09 2015 fvogtAATTsuse.com- Refresh patches with line offsets: M 0146-dracut.sh-corrected-logfile-check.patch M 0182-fix_add_drivers_hang.patch M 0183-kernel-modules-Fix-storage-module-selection-for-sdhc.patch
* Mon Nov 09 2015 fvogtAATTsuse.com- Modify 0181-load-xhci-pci.patch: - Add hid-logitech-hidpp - Ignore errors for xhci-pci, ehci-platform and hid-logitech-hidpp - bsc#952491, bsc#935563 and boo#953035
* Mon Nov 09 2015 fvogtAATTsuse.com- Add 0311-less_pointless_module_errors.patch (bsc#952491 and bsc#935563) - Don\'t warn if installing built-in modules fails - Don\'t print the error message twice- Modify 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch and 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch - Fixes bnc#935338 - Use mktemp instead of hardcoded filenames, possible vulnerability
* Tue Oct 20 2015 hareAATTsuse.de- Clean up whitespaces:
* modified 0133-Allow-multiple-configurations-per-network-interface-.patch
* modified 0180-replace-iscsistart-with-systemd-service-files.patch- Add missing patch header:
* modified 0181-load-xhci-pci.patch
* modified 0182-fix_add_drivers_hang.patch
* modified 0305-static_network_setup_return_zero.patch
* modified 0306-iscsi_set_boot_protocol_from_ifcfg.patch
* modified 0308-s390-update_active_devices_initrd.patch- Renamed patches:
* 0181-kernel-modules-Fix-storage-module-selection-for-sdhc.patch to 0183-kernel-modules-Fix-storage-module-selection-for-sdhc.patch
* 0182-kernel-modules-increase-SDHCI-driver-inclusion.patch to 0184-kernel-modules-increase-SDHCI-driver-inclusion.patch
* 0200-fix_nfs_with_ip_instead_of_hostname.patch to 0185-fix_nfs_with_ip_instead_of_hostname.patch
* 0201-modsign_fix_keyctl_install.patch to 0186-modsign_fix_keyctl_install.patch
* 0210-do_not_fall_back_into_root_shell_on_error.patch to 0187-Do-not-open-an-unprotected-root-shell-on-failure.patch
* s390_dasd_install_collect.patch to 0188-95dasd_rules-Install-collect-udev-helper-binary.patch- Do not call iscsistart (bsc#951003)
* Removed 0307-iscsi_multipath_fixes.patch
* Added 0307-95iscsi-Set-number-of-login-retries.patch- Fixup booting from qla4xxx (bsc#951003)
* Added 0309-95iscsi-Do-not-require-network-for-qla4xxx-flash-ses.patch
* Added 0310-95iscsi-set-rd.iscsi.firmware-for-qla4xxx-sessions.patch
* Wed Oct 14 2015 trennAATTsuse.de- Always install dm-snaphost module if lvm dracut module is needed, even if dm-snampshot is not loaded on the host yet (bsc#947518) M 0128-90lvm-Install-dm-snapshot-module.patch
* Fri Sep 25 2015 fvogtAATTsuse.com- Add 0181-load-xhci-pci.patch (boo#939411)- Add 0182-fix_add_drivers_hang.patch from Base:System (bsc#923116)
* Wed Sep 23 2015 trennAATTsuse.de- Revert: 0176-Parse-rootflags-correctly.patch bnc#940100 The patch caused a regression and added quite some complexity. The bug (912734) which got fixed by the reverted patch is solved via documentation TID for now. It is worked (mainline/factory) for a proper solution which might get added later when properly tested.
* Tue Sep 22 2015 thomas.blumeAATTsuse.com- update active_devices.txt from /boot/zipl device (bsc#939101)
* Add 0308-s390-update_active_devices_initrd.patch
* Thu Sep 17 2015 fvogtAATTsuse.com- Replace 0181-dracut-add-trivial-vconsole-fontmap.patch (bad workaround, only works for a single case) and 0172-10i18n-module-setup.sh-For-FONT_MAP-also-check-wheth.patch (didn\'t work) by 0172-i18n_add_correct_fontmaps.patch.- Solves bsc#943312, boo#932981 and bnc#904533 correctly.
* Wed Sep 09 2015 thomas.blumeAATTsuse.com- fix systemd-vconsole-error in initrd (bsc#943312) Add 0181-dracut-add-trivial-vconsole-fontmap.patch
* Mon Sep 07 2015 trennAATTsuse.de- Check for existance of link targets (/run) bsc#922676- Remove exit 0 from do-convertfs.sh which is used as a pre-pivot hook and hooks get sourced, cmp with: modules.d/99base/dracut-lib.sh: source_all \"/lib/dracut/hooks/$_dir\" \"$AATT\" So hooks must not use exit! bsc#922676 This fixes the critical bug for s390x kiwi images which need the symlink from /var/run to /run and additional later hooks. Modify: 0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch- Incorporate other convertfs patch (one liner) into this patch as well and delete: 0168-convertrunfs-Fix-typo.patch
* Wed Sep 02 2015 thomas.blumeAATTsuse.com- port iscsi network setup and multipath fixes from SLES12 GM to SP1 (bsc#919179)
* Add 0305-static_network_setup_return_zero.patch
* Add 0306-iscsi_set_boot_protocol_from_ifcfg.patch
* Add 0307-iscsi_multipath_fixes.patch
* Wed Aug 19 2015 tiwaiAATTsuse.de- Fix the boot from SD/MMC card, including sdhci-
* kernel modules into initrd (bnc#942361): 0181-kernel-modules-Fix-storage-module-selection-for-sdhc.patch 0182-kernel-modules-increase-SDHCI-driver-inclusion.patch
* Thu Aug 13 2015 trennAATTsuse.de- Fix dmraid (bnc#905746, bnc#940585):
* Add 0300-mdraid_tell_mainloop_if_we_make_progress.patch 0301-systemd_initqueue_continue_waiting_if_any_timeout_script_makes_progress.patch 302-dracut-systemd_rootfs-generator.sh_always_create_generated _files.patch 0303-crypt_parse-crypt.sh_hide_encrypted_devices_from_systemd_timeout_warnings.patch 0304-dmraid_use_udev.patch- Do not open an unprotected root shell on failure (bnc#936736)
* Add 0210-do_not_fall_back_into_root_shell_on_error.patch
* Mon Aug 03 2015 thomas.blumeAATTsuse.com- replace iscsistart with iscsid (fate#319024) Add 0180-replace-iscsistart-with-systemd-service-files.patch
* Tue Jul 21 2015 trennAATTsuse.de- dasd_rules need collect binary to be installed into initrd bnc#938867 Add s390_dasd_install_collect.patch
* Tue Jun 16 2015 trennAATTsuse.de- Fix installing of keyctl (bnc#934736)
* Add 0200-fix_nfs_with_ip_instead_of_hostname.patch- Fix nfs if IPv4 address is used in /etc/fstab to nfs mount rootfs
* Add 0201-modsign_fix_keyctl_install.patch
* Mon May 11 2015 trennAATTsuse.de- Fix badly merged patch: 0176-Parse-rootflags-correctly.patch bnc#930175
* Wed Apr 08 2015 hareAATTsuse.de- Restore handling of \'-c\' (bsc#886839)- 90qemu: add virtio_rng kernel module (bsc#918238)
* Wed Mar 18 2015 hareAATTsuse.de- Parse rootflags correctly (bsc#912734)
* Add 0176-Parse-rootflags-correctly.patch- 90multipath: start multipathd after udev (bsc#903001)
* Add 0177-90multipath-start-multipathd-after-udev.patch
* Wed Feb 11 2015 hareAATTsuse.de- Drop obsolete patch:
* Remove 0170-log-dracut-command-line-during-boot-process.patch- Enabled Warning for failed kernel modules per default (bnc#886839)
* Modify 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch
* Fri Feb 06 2015 hareAATTsuse.de- Reformat patches:
* 0165-Order-root-fsck-after-pre-mount.patch
* 0172-10i18n-module-setup.sh-For-FONT_MAP-also-check-wheth.patch- Rename patches:
* Remove fips-enable-aesni-intel.patch
* Add 0174-fips-enable-aesni-interl.patch
* Remove dracut-fix-bad-array-subscript.patch
* Add 0175-dracut-Fix-bad-array-subscript-messages.patch- 98systemd/rootfs-generator: Use builtins instead of \'grep\' (bnc#897252)
* Add 0167-98systemd-rootfs-generator-Use-builtins-instead-of-g.patch- Enabled Warning for failed kernel modules per default
* Add 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch- log dracut command line during boot process
* Add 0170-log-dracut-command-line-during-boot-process.patch- Follow symbolic links for kernel arguments (bnc#902375)
* Add 0173-Follow-symbolic-links-for-kernel-arguments-bnc-90237.patch
* Thu Feb 05 2015 meissnerAATTsuse.com- add hooks for regenerating the initrd after updating this package, both mainpackage and -fips subpackage. bsc#916348- fips-enable-aesni-intel.patch: put aesni-intel.ko into the initrd for FIPS usage. bsc#914126- dracut-fix-bad-array-subscript.patch: fixed \"bad array subscript\" messages when adding kernel modules using \"/etc/dracut.conf\". bsc#911660
* Wed Dec 03 2014 trennAATTsuse.de- Order of patches broken, because not all mainline/factory patches are relevant for sle12- Fix console font for foreign languages (bnc#904533)
* Add 0163-Install-etc-sysconfig-console-to-see-specific-fonts.patch
* Add 0172-10i18n-module-setup.sh-For-FONT_MAP-also-check-wheth.patch- Fix SUSE specific initrd- vs mainline initramfs-.img
* Add 0164-Fix-initramfs-ver.img-vs-initrd-ver-in-dracut-initra.patch- Do fsck (bnc#906592)
* Add 0165-Order-root-fsck-after-pre-mount.patch- Also add ifname=: boot parameter to always identify correct NIC (bnc#900831)
* Add 0166-nfs-Add-ifname-dev-mac-to-boot-parameters.patch- Typo fix (bnc#901322)
* Add 0168-convertrunfs-Fix-typo.patch- also add the cmac.ko cryptographic module to the modules (bnc#905296)
* Add 0171-also-add-the-cmac.ko-cryptographic-module-to-the-mod.patch- Fix install-kernel: - Call depmod (bnc#874621) - add .config (bnc#897901)
* Thu Nov 20 2014 mmarekAATTsuse.cz- purge-kernels: Also clean up kgraft-patch packages (bnc#905869)
* Wed Sep 24 2014 trennAATTsuse.de- Add ip= and root=nfs.. to dracut internal cmdline to make nfsroot working (bnc#896464)
* Add 0160-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch- Fix error message in case there is no internal dracut cmdline added Simple fix
* Add 0161-Fix-error-message-when-there-are-no-internal-kernel-.patch- Request DHCP lease instead of getting/applying the offer No bug number, but Pawel rated this high prio. This should hit SLE12 still.
* Add 0162-network-Request-DHCP-lease-instead-of-getting-applyi.patch
* Mon Sep 22 2014 trennAATTsuse.de- Try to load xennet driver in network module (if loaded). bnc#896464, bnc#896259
* Add 0159-network-Try-to-load-xennet.patch
* Thu Sep 11 2014 trennAATTsuse.de- dracut.usage.asc: Remove distro specific help from manpage (bnc#895363)
* Add 0156-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch- Add /boot/zipl to host devs if it is a mount point (bnc#892187)
* Add 0157-Add-boot-zipl-to-host-devs-if-it-is-a-mount-point.patch- Add SUSE kernel module dependencies (in /etc/modprobe.d/
*) (bnc#895331)
* Add 0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch
* Thu Sep 04 2014 trennAATTsuse.de- Network module may take quite a lot of initrd space. Do not add it unconditionally (bnc#892851)
* Add 0153-Only-add-network-module-on-request-and-on-dependenci.patch- S390x can do s2disk, allow resume module there (bnc#889795)
* Add 0154-resume-Also-allow-this-module-on-S390-again-s2disk-c.patch- Harden iscsi parameter checking. No bug report, but this problem was found during multipath testing and happens with 2 or more iscsi devices.
* Add 0155-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch
* Fri Aug 29 2014 trennAATTsuse.de- Do not blindly try to touch the logfile (bnc#893219)
* Add 0146-dracut.sh-corrected-logfile-check.patch- Only fix UUID= fstab parsing
* Add 0147-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch- Also fix other parsing syntax in fstab like LABEL=
* Add 0148-dracut.sh-Fix-LABEL-and-other-fstab-syntax.patch- Fix up some bugs from previous commit
* Add 0149-dracut.sh-Fix-fstab-parsing-again.patch- bnc#893615
* Add 0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch- pixz does need too much memory, go back to xz in a conservative way (bnc#893981)
* Add 0151-Go-back-to-xz-again-pixz-may-use-too-much-memory-whi.patch- Add some default tools to initrd when debug module is included and already provided an commented example line how to easily enable it. No functional change by default.
* Add 0152-Add-a-comment-to-easily-add-debug-modules-also-add-v.patch
* Thu Aug 21 2014 trennAATTsuse.de- dracut.sh: check for logfile (--logfile option) and create it if necessary Add 0139-dracut.sh-check-for-logfile-logfile-option-and-creat.patch- Avoid duplicate names in host_devs Add 0140-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch- iscsi: Avoid bad ip route call on empty address Add 0141-iscsi-Avoid-bad-ip-route-call-on-empty-address.patch- 40network: Don\'t report error for .../ifroute-
* during module setup Add 0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch- iscsi: Fix up ipv6 in brackets , iterate over all needed iscsi mounts Add 0143-iscsi-Fix-up-ipv6-in-brackets-iterate-over-all-possi.patch- 90crypt: Fixed crypttab_contains() to also work with device in /etc/crypttab Add 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch- 40network: handle \'ip=ifname:static\' correctly (bnc#892801) Add 0145-40network-handle-ip-ifname-static-correctly.patch
* Thu Aug 14 2014 trennAATTsuse.de- Allow multiple configurations per network interface (bnc#887906) Add 0133-Allow-multiple-configurations-per-network-interface-.patch- Remove bootdev warning (bnc#881112) Add 0134-Remove-bootdev-warning-bnc-881112.patch- check for existance of 69-dm-lvm-metad.rules in modules_setup.sh, lvm module (bnc#891791) Add 0135-lvm-Fix-12819a579900b9691e2-check-for-existance-of-6.patch- Moved persistent network rule revert to another file (was not in github): Delete: 0133-Remove-70-persistent-net.rules.patch Add: 0136-Revert-95udev-rules-add-persistent-network-rule.patch- dracut-use-fipscheck-openssl.patch: Switch from Mozilla NSS sha256hmac checking to fipscheck as recommended Add: 0137-Switch-from-Mozilla-NSS-sha256hmac-checking-to-fipsc.patch- warpclock: Do not use warpclock module on S390(x), hwclock does not exist there (bnc#884513) Add 0138-warpclock-Do-not-use-warpclock-module-on-S390-x-hwcl.patch
* Tue Aug 05 2014 trennAATTsuse.de- 99base: Increase initqueue timeout in non systemd case (bnc#887402)
* Add: 0127-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch- 90lvm: Install dm-snapshot module (bnc#888530)
* Add: 0128-90lvm-Install-dm-snapshot-module.patch- Revert commit 6ecab258710d158a7a6 and only do not wait for swap via parameter (bnc#882812)
* Add: 0129-Revert-commit-6ecab258710d158a7a6-and-only-do-not-wa.patch- nfs: Always add all kernel modules for kdump (bnc#887906)
* Add: 0130-nfs-Always-add-all-kernel-modules-for-kdump.patch- 40network: handle prefixed IP addresses correctly (bnc#880108)
* Add: 0131-40network-handle-prefixed-IP-addresses-correctly.patch- 40network: fixup static network configuration
* Add: 0132-40network-fixup-static-network-configuration.patch- Remove 70-persistent-net.rules
* Add: 0133-Remove-70-persistent-net.rules.patch
* Mon Jul 21 2014 hareAATTsuse.de- mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated (bnc#886630)
* Add: 0120-mkinitrd-suse.sh-Bail-out-with-exit-1-if-initrd-cann.patch- Adjust initramfs-$kernel.img to SUSE default: initrd-$kernel (bnc#882306)
* Add: 0121-Adjust-initramfs-kernel.img-to-SUSE-default-initrd-k.patch- btrfs: btrfs-dump-super and btrfs-select-super do not exist (bnc#886883)
* Add: 0122-btrfs-btrfs-dump-super-and-btrfs-select-super-do-not.patch- 95zfcp_rules: fix typo in module_setup (bnc#887582)
* Add: 0123-95zfcp_rules-fix-typo-in-module_setup.patch- 40network: Update iBFT scanning code to handle IPv6 (bnc#887542)
* Add: 0124-40network-Update-iBFT-scanning-code-to-handle-IPv6.patch- 40network: separate \'mask\' and \'prefix\' (bnc#887542)
* Add: 0125-40network-separate-mask-and-prefix.patch- 01fips: Add drbg module to force loaded modules (bnc#875855)
* Add: 0126-01fips-Add-drbg-module-to-force-loaded-modules.patch
* Mon Jul 14 2014 trennAATTsuse.de- Fixup executable bits of newly patched files manually in spec file bnc#887117
* Mon Jul 14 2014 hareAATTsuse.de- Mark all scripts as executable (bnc#887010)
* Remove: 0116-81cio_ignore-Mark-scripts-as-executable
* Add: 0116-Mark-scripts-as-executable.patch- 95dasd_rules: Enable device before checking type
* Add: 0117-95dasd_rules-Enable-the-device-before-checking-devic.patch- 95zfcp_rules: Enable device before checking type
* Add: 0118-95zfcp_rules-Enable-the-device-before-checking-devic.patch- Reset IFS variable
* Add: 0119-Reset-IFS-variable.patch
* Sat Jul 12 2014 hareAATTsuse.de- Handle module alias properly (bnc#886839)
* Add: 0115-Handle-module-alias-properly.patch- 81cio_ignore: Mark scripts as executable (bnc#887010)
* Add: 0116-81cio_ignore-Mark-scripts-as-executable.patch
* Fri Jul 11 2014 hareAATTsuse.de- 91zipl: Translate \'ext2\' into \'ext4\' module
* Add: 0114-91zipl-Translate-ext2-3-into-ext4.patch
* Thu Jul 10 2014 hareAATTsuse.de- Enable converting of directory /var/run /var/lock to symlinks (bnc#877680)
* Add: 0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch- Fixup typo \'firmare\' instead of \'firmware\'
* Add: 0107-Fixup-typo-firmare-instead-of-firmware.patch- 91zipl: Store commandline correctly
* Add: 0108-91zipl-Store-commandline-correctly.patch- 95dasd_rules: Store all devices in commandline
* 0109-95dasd_rules-Store-all-devices-in-commandline.patch- 95zfcp_rules: Store all devices in commandline
* Add: 0110-95zfcp_rules-Store-all-devices-in-commandline.patch- 90mdraid: Remove line for \'offroot\' detection
* Add: 0111-90mdraid-Remove-line-for-offroot-detection.patch- 99base: warn on invalid command for initqueue
* Add: 0112-99base-warn-on-invalid-command-for-initqueue.patch- 91zipl: Install script as executable
* Add: 0113-91zipl-Install-script-as-executable.patch
* Tue Jul 08 2014 hareAATTsuse.de- Print stored dracut commandline during initramfs build
* Add: 0101-Print-stored-dracut-commandline-during-initramfs-bui.patch- Align dev_unit_name() with systemd\'s function
* Add: 0102-Align-dev_unit_name-with-systemd-s-function.patch- Fixup missing separators in rootfs-block cmdline
* Add: 0103-Fixup-missing-separators-in-rootfs-block-cmdline.patch- Generate fallback mount unit for root filesystem (bnc#855258)
* Add: 0104-Generate-fallback-mount-unit-for-root-filesystem.patch- 95iscsi: parse output from iscsiadm correctly (bnc#886199)
* Add: 0105-95iscsi-parse-output-from-iscsiadm-correctly.patch
* Thu Jul 03 2014 dsterbaAATTsuse.cz- 90btrfs: Install rescue utilities to initrd
* Add: 0100-btrfs-add-initrd-rescue-utilities.patch
* Thu Jul 03 2014 hareAATTsuse.de- 40network: create /var/lib/wicked in ifup.sh (bnc#885141)
* Add: 0089-40network-create-var-lib-wicked-in-ifup.sh.patch- dracut: caps: Remove whole caps module
* Add: 0090-dracut-caps-Remove-whole-caps-module.patch- dracut: biosdevname: Only install if present
* Add: 0091-dracut-biosdevname-In-SUSE-biosdevname-package-is-in.patch- dracut: nbd: Only complain of missing binary in hostonly mode if rootfs is on nbd
* Add: 0092-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch- 95iscsi: generate commandline for software iscsi (bnc#880108)
* Add: 0093-95iscsi-generate-commandline-for-software-iscsi.patch- Implement shortcut \'ip=:static\' for static configuration
* Add: 0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch- 95iscsi: use static configuration for software iscsi (bnc#884768)
* Add: 0095-95iscsi-use-static-configuration-for-software-iscsi.patch- dracut: Fix error: local: can only be used in a function
* Add: 0096-dracut-Fix-error-local-can-only-be-used-in-a-functio.patch- Implement \'rd.timeout\' to modify the device timeout (bnc#878770)
* Add: 0097-Implement-rd.timeout-to-modify-the-device-timeout.patch- Do not call \'lvm\' for non-LVM device-mapper devices
* Add: 0098-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch- 90multipath: Load device_handler modules early during boot (bnc#871617)
* Add: 0099-90multipath-Load-device_handler-modules-early-during.patch
* Fri Jun 27 2014 hareAATTsuse.de- 91zipl: Add new module for s390x configuration changes (bnc#884743)
* Add: 0088-91zipl-Add-new-module-to-update-s390x-configuration.patch
* Thu Jun 26 2014 hareAATTsuse.de- 95dasd_rules: Fixup rd.dasd parsing
* Add: 0079-95dasd_rules-fixup-rd.dasd-parsing.patch- 95dasd_rules: Print out rd.dasd command-line
* Add: 0080-95dasd_rules-print-out-rd.dasd-commandline.patch- 95dasd_mod: do not set module parameter
* Add: 0081-95dasd_mod-do-not-set-module-parameters-if-dasd_cio_.patch- 00warpclock: Check for /sbin/hwclock (bnc#884513)
* Add: 0082-00warpclock-check-for-sbin-hwclock.patch- 95zfcp_rules: Fixup rd.zfcp parsing
* Add: 0083-95zfcp_rules-Fixup-rd.zfcp-parsing.patch- 95rootfs_block: terminate commandline parameter
* Add: 0084-95rootfs-block-Correctly-terminate-commandline-param.patch- 95zfcp_rules: Print out rd.zfcp command-line
* Add: 0085-95zfcp_rules-print-out-rd.zfcp-commandline-parameter.patch- 95zfcp_rules: Auto-generate ipl device rule
* Add: 0086-95zfcp_rules-Auto-generate-udev-rule-for-ipl-device.patch- 95dasd_rules: Auto-generate ipl device rule
* Add: 0087-95dasd_rules-Auto-generate-udev-rule-for-ipl-device.patch
* Mon Jun 23 2014 hareAATTsuse.de- More empty commandline fixes
* Add: 0074-More-empty-cmdline-fixes.patch- 95dasd_rules: enable parsing of rd.dasd= commandline parameter
* Add: 0075-95dasd_rules-enable-parsing-of-rd.dasd-commandline-p.patch- Correctly set cio_ignore for dynamic s390 rules
* Add: 0076-Correctly-set-cio_ignore-for-dynamic-s390-rules.patch- 90multipath: add missing 11-dm-mpath.rules file (bnc#883149)
* Add: 0077-90multipath-add-missing-11-dm-mpath.rules-file.patch- Restore original IFS value (bnc#883770)
* Add: 0078-Restore-original-IFS-value.patch
* Wed Jun 18 2014 tbehrensAATTsuse.com- Fix non-export of journal dev boot options
* Add: 0071-Fix-non-export-of-journal-dev-boot-options.patch- Also export root= boot param for hostonly-cmdline
* Add: 0072-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch- Don\'t create lots of empty cmdline files
* Add: 0073-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch
* Tue Jun 17 2014 hareAATTsuse.de- 81cio_ignore: rewrite module to not mount any filesystem (bnc#882685)
* Add: 0070-81cio_ignore-rewrite-module.patch
* Tue Jun 17 2014 hareAATTsuse.de- 81cio_ignore: ignore module if cio_ignore is not specified (bnc#882685)
* Add: 0069-81cio_ignore-skip-module-if-cio_ignore-is-not-active.patch
* Mon Jun 16 2014 hareAATTsuse.de- 40network: always start netroot in ifup.sh (bnc#881235)
* Add: 0066-40network-always-start-netroot-in-ifup.sh.patch- 95fcoe: check() always returns 255
* Add: 0067-95fcoe-check-always-returns-255.patch- 95fcoe-uefi: Test for EFI firmware (bnc#882412)
* Add: 0068-95fcoe-uefi-Test-for-EFI-firmware.patch
* Fri Jun 13 2014 hareAATTsuse.de- Rename patches to match git repository:
* Old: more-fips-adjustments.patch
* New: 0057-01fips-Include-some-more-hmacs.patch
* Old: dracut-check-supported.patch
* New: 0058-dracut-add-warning-when-including-unsupported-module.patch- Add 99suse module to git repository:
* Remove: parse-suse-initrd.sh
* Remove: module-setup-initrd.sh
* Add: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch- Add write-ifcfg-suse.sh to git repository:
* Remove: write-ifcfg-suse.sh
* Add: 0060-45ifcfg-Add-SUSE-specific-write-ifcfg-file.patch- Fixup error messages in write-ifcfg-suse.sh (bnc#881286)
* Add: 0061-45ifcfg-Fixup-error-message-in-write-ifcfg-suse.patch- Add missing \'libgcc_s.so\' library (bnc#881692):
* Add: 0062-95iscsi-Install-libgcc_s-library.patch
* Add: 0063-90multipath-Install-libgcc_s-library.patch- Install missing scsi_dh_alua module (bnc#871617)
* Add: 0064-90kernel-modules-install-scsi_dh_alua.patch- 95iscsi: fixup bnx2i offload booting (bnc#855747)
* Add: 0065-95iscsi-Fixup-bnx2i-offload-booting.patch
* Wed Jun 11 2014 jeffmAATTsuse.com- Add option to warn if unsupported modules are added to the initramfs - Enable this option for \'make install\' when a kernel with CONFIG_SUSE_KERNEL_SUPPORTED enabled is used. (bnc#882332) - Add dracut-check-supported.patch
* Wed Jun 11 2014 meissnerAATTsuse.com- include the several hmacs needed for FIPS integrity checking of cryptsetup, libgcrypt, libfipscheck1. Also add the openssl HMACs too as someone else seems to use those too. Add: more-fips-adjustments.patch
* Wed Jun 04 2014 hareAATTsuse.de- Rediff patches to match git repository- 95fcoe: Check for FCoE devices prior to binaries
* Modify 0055-95fcoe-Only-install-fcoe-module-if-required.patch- 99base: Install chown instead of chgrp
* Modify 0052-99base-Add-chown-binary.patch- 95iscsi: do not try to detect iSCSI firmware during booting; should be handled via commandline parameter
* Modify 0030-95iscsi-Autodetect-iSCSI-firmware.patch- Rename patch:
* old: 0051-mkinitrd-suse-add-update-booloader-message.patch new: 0051-mkinitrd-suse-add-update-bootloader-message.patch
* Wed Jun 04 2014 hareAATTsuse.de- Rename patches to match git repository:
* old: 0013-Correct-paths-for-openSUSE.patch new: 0011-Correct-paths-for-openSUSE.patch
* old: 0014-Check-for-plymouth-lib-directories.patch new: 0012-Check-for-plymouth-lib-directories.patch
* old: dracut_do_not_update_booloader_if_no_kernel_is_found.patch new: 0013-mkinitrd-suse-do-not-update-bootloader-if-no-kernel-.patch
* old: suse_grub_manpage.patch new: 0014-Update-dracut-manpage-for-GRUB-Legacy-and-GRUB2.patch
* old: replace_dhclient_with_wickedd_dhcp_supplicants.patch new: 0015-40network-replace-dhclient-with-wickedd-dhcp-supplic.patch
* old: 0015-add-new-s390x-specific-rule-files.patch new: 0016-Add-new-s390x-specific-rule-files.patch
* old: change_write_ifcfg_to_suse.patch new: 0017-45ifcfg-use-distro-specific-scripts.patch
* old: dracut-fix-whitespace-add-drivers_call.patch new: 0018-mkinitrd-suse-Fix-whitespaces-when-adding-drivers.patch
* old: wait_for_network_race_condition_fix.patch new: 0019-40network-Fix-race-condition-when-wait-for-networks.patch
* old: dracut-warpclock_module.patch new: 0020-00warpclock-Set-correct-timezone.patch
* old: s390-dcssblk.patch new: 0021-95dcssblk-Add-new-module-for-DCSS-block-devices.patch
* old: dracut-install-persistent-rule.patch new: 0022-95udev-rules-add-persistent-network-rule.patch
* old: dracut-really-always-add-autofs4.patch new: 0023-systemd-always-tries-to-load-autofs4.patch
* old: mdraid-setup.patch new: 0024-Fixup-mdraid-setup.patch
* old: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch new: 0025-95udev-rules-Add-59-scsi-sg_utils.rules.patch
* old: 0016-90multipath-add-67-kpartx-compat.rules.patch new: 0026-90multipath-add-67-kpartx-compat.rules.patch
* old: 0017-90multipath-install-dracut-specific-service-file.patch new: 0027-90multipath-install-dracut-specific-service-file.patch
* old: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch new: 0028-95udev-rules-Include-correct-sg3_utils-rules.patch
* old: 0021-90multipath-install-correct-multipath-rules.patch new: 0029-90multipath-install-correct-multipath-rules.patch
* old: add_dracuts_network_params_for_iscsi.patch new: 0030-95iscsi-Autodetect-iSCSI-firmware.patch
* old: 0022-90multipath-Fixup-service-file-for-booting.patch new: 0031-90multipath-Fixup-service-file-for-booting.patch
* old: 0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch new: 0032-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
* old: 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch new: 0033-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch
* old: 0025-dracut_continue_adding_modules_also_on_error.patch new: 0034-dracut-Do-not-stop-installing-drivers-if-one-fails.patch
* old: 0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch new: 0035-Introduce-force-drivers-parameter-and-force_drivers-.patch
* old: 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch new: 0036-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
* old: 0028-95fcoe-update-fcoe-interface-check.patch new: 0037-95fcoe-update-fcoe-interface-check.patch
* old: 0029-95fcoe-start-lldpad-separately.patch new: 0038-95fcoe-start-lldpad-separately.patch
* old: 0030-dracut-mkinitd_cleanup_force_host_only_var.patch new: 0039-Remove-force-parameter-from-mkinitrd.patch
* old: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch new: 0040-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
* old: 0033-dracut_hostonly_hostonly_cmdline_default.patch new: 0041-mkinitd-suse-remove-hostonly-and-hostonly-cmdline.patch
* old: 0034-suse.conf.example_extend.patch new: 0042-Enhance-suse.conf-example-with-SUSE-specific-setting.patch
* old: 0035-always_add_network.patch new: 0043-40network-always-add-network-module.patch
* old: 0036-add_extra_debug_binaries.patch new: 0044-Add-find-to-debug-binaries.patch
* old: 0037-fix_s390_network_modules_install.patch new: 0045-40network-add-missing-_arch-variable-declaration.patch
* old: 0038-remove_waiting_for_swap_dev.patch new: 0046-dracut-Do-not-wait-for-swap-device.patch
* old: 0039-s390_no_resume_module.patch new: 0047-95resume-skip-module-for-s390-x.patch
* old: 0041-only_enable_network_if_explicitly_requested.patch new: 0048-40network-Only-enable-network-interfaces-if-explicit.patch
* old: 0042-ibft_autoconfig_param.patch new: 0049-95iscsi-Use-ip-ibft-for-ibft-autoconfiguration.patch
* old: 0043-fcoe_strip_quotes.patch new: 0050-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch
* old: 0044-Add_update_bootloader_msg.patch new: 0051-mkinitrd-suse-add-update-booloader-message.patch
* old: 0045-add-chown_binary.patch new: 0052-99base-Add-chown-binary.patch
* old: dracut-fips-module-loading-fixes.patch new: 0053-01fips-fixup-loading-issues.patch
* old: 0046-ibft_update_cmdline_printing.patch new: 0054-95iscsi-update-commandline-printing.patch
* old: 0047-only_install_fcoe_if_required.patch new: 0055-95fcoe-Only-install-fcoe-module-if-required.patch
* old: 0048-cio_ignore.patch new: 0056-81cio_ignore-handle-cio_ignore-commandline.patch
* Mon Jun 02 2014 trennAATTsuse.de- Mount zipl device on S390 (bnc#874902) Add 0048-cio_ignore.patch
* Mon Jun 02 2014 trennAATTsuse.de- Only install fcoe if required and suppress require-binaries output Add 0047-only_install_fcoe_if_required.patch- ibft: Correctly show ibft cmdline via print-cmdline Add 0046-ibft_update_cmdline_printing.patch
* Mon Jun 02 2014 meissnerAATTsuse.com- dracut-fips-module-loading-fixes.patch: bnc#875855 - adjust FIPS module list - on architecture specific modules, failing loading is not critical- ship 98selinux, for people that want to use SELinux.
* Wed May 28 2014 trennAATTsuse.de- Update to latest git HEAD: commit 0fa5dbedc5b222435f51f7460a81232ee120c4e1 Tue May 20 13:23 Modified dracut_v37_to_HEAD.patch Modified mdraid-setup.patch Modified dracut-install-persistent-rule.patch Removed 0032-98systemd-fixup-rootfs-generator-installation-path.patch- Add /etc/dracut.d.conf/01-dist modifications to file instead of writing to it via rpm build section Add 0033-dracut_hostonly_hostonly_cmdline_default.patch Add 0034-suse.conf.example_extend.patch- Cleanup mkinitrd-suse.sh:
* Remove hostonly and hostonly-cmdline -> this is done via 01-dist config file now- Always add network module based on modules_setup.sh check() function and not via 01-dist config file Add 0035-always_add_network.patch- Add find to debug binaries - Useful and harmless Add 0036-add_extra_debug_binaries.patch- Fix adding of network modules for s390 (bnc#879302) Add 0037-fix_s390_network_modules_install.patch- Omit resume module on s390(x) - There is no suspend on s390 Add 0039-s390_no_resume_module.patch- Do not wait for swap - This causes trouble with Rudi\'s autobuild images: Add 0038-remove_waiting_for_swap_dev.patch- Fcoe and ibft fixes (bnc#879038): Add 0041-only_enable_network_if_explicitly_requested.patch Add 0042-ibft_autoconfig_param.patch Add 0043-fcoe_strip_quotes.patch- Print message when starting to update bootloader Add 0044-Add_update_bootloader_msg.patch- ToDo: Pass hostonly variable earlier so that is always avail in check() function. Still already add: Add 0040-fcoe_fix_check_function.patch- Add chown to initrd (bnc#879767) Add 0045-add-chown_binary.patch- Use parallel pixz instead of xz binary to compress the initrd
* Tue May 20 2014 trennAATTsuse.de- From Hannes Reinecke : fixup rootfs-generator installation path (bnc#878714) Add 0032-98systemd-fixup-rootfs-generator-installation-path.patch
* Mon May 19 2014 trennAATTsuse.de- Corrected previous patch Modified: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
* Mon May 19 2014 trennAATTsuse.de- From Hannes Reinecke : skip VLAN devices in fcoe-up (bnc#878583) Add: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch
* Thu May 15 2014 trennAATTsuse.de- By Hannes Reinecke : - Fixup FCoE booting (bnc#877288)
* Add 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch
* Add 0028-95fcoe-update-fcoe-interface-check.patch
* Add 0029-95fcoe-start-lldpad-separately.patch- Cleanup host_only variable using in mkinitrd- Remove --force parameter from mkinitrd, we always force anyway
* Add 0030-dracut-mkinitd_cleanup_force_host_only_var.patch- Remove acpi parameter from mkinitrd, this is done differently nowadays- Adjust manpage accordingly
* Wed May 14 2014 meissnerAATTsuse.com- also do the service magic in %post/%postun, otherwise purge-kernels will not get enabled.
* Wed May 07 2014 trennAATTsuse.de- Do not inst binaries explicitly into /bin or /usr/bin, it is already taken care of internally for that: Delete 0006-Install-bin-mount.patch Modify 0013-Correct-paths-for-openSUSE.patch- Do not stop trying to load drivers (via add-drivers or filesystems) if one fails Add 0025-dracut_continue_adding_modules_also_on_error.patch- Introduce force-drivers. mkinitrd should use this one instead of add-drivers later, if accepted mainline Add 0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch
* Mon May 05 2014 hareAATTsuse.de- Update add_dracuts_network_params_for_iscsi.patch to detect be2iscsi firmware devices- Remove obsolete patch fix-iscsi-firmware.sh- Fixup iscsi firmware booting with be2iscsi (bnc#873448): Added 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch- Renamed mkinird_differ_host_and_cmdline_only_properly.patch to 0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch
* Wed Apr 30 2014 trennAATTsuse.de- Update to lateste git HEAD 48b7ab1b35adf1f3f09f883ef14ea0a3fba1e468 Added: dracut_v37_to_HEAD.patch Modified: 0013-Correct-paths-for-openSUSE.patch Modified: mdraid-setup.patch Modified: replace_dhclient_with_wickedd_dhcp_supplicants.patch Deleted: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch Deleted: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch- Fix lvm and other possible not working thing due to new parameter: hostonly-cmdline which has to be active by default bnc#874000 bnc#874905 bnc#874363 Added: mkinird_differ_host_and_cmdline_only_properly.patch- Make write-ifcfg-suse.sh more update robust Avoid rebasing of diff with every update touching this file by adding write-ifcfg-suse.sh as source file and copy/link in .spec file. Modified: change_write_ifcfg_to_suse.patch
* Tue Apr 29 2014 meissnerAATTsuse.com- consolidate -fips-aesni into -fips again. The problem due to it was split off upstream was solved in the kernel.
* Fri Apr 25 2014 meissnerAATTsuse.com- Create new -fips and -fips-aesni subpackage for kernel integrity checking. bnc#856310 FATE#316930- add spaces around \"network\" in 01-dist.conf, as the addmodules list is concatenated and you never know which config is before or after and what it does.
* Wed Apr 16 2014 hareAATTsuse.de- Enable multipath correctly during booting (bnc#873686) Add: 0022-90multipath-Fixup-service-file-for-booting.patch
* Mon Apr 14 2014 pwieczorkiewiczAATTsuse.com- fix-iscsi-firmware.patch: Fix according to dracut-037 updates (iscsistarted-iscsi:).
* Mon Apr 14 2014 pwieczorkiewiczAATTsuse.com- add_dracuts_network_params_for_iscsi.patch: Add missing dracut\'s cmdline parameters to make network mandatory and boot using iBFT when present. Without them iBFT booting does not work.
* Fri Apr 11 2014 hareAATTsuse.de- Install correct rule files for multipath support (bnc#873151) Add: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch Add: 0021-90multipath-install-correct-multipath-rules.patch
* Thu Apr 10 2014 trennAATTsuse.de- Do not always try to add iscsi module, let its check function decide- Compress initrd with xz --check=crc32 -6 by default
* Wed Apr 09 2014 crrodriguezAATTopensuse.org- Remove the bootchart module, note that we still keep the systemd-bootchart one which provides similar functionality.
* Wed Apr 09 2014 crrodriguezAATTopensuse.org- Remove the busybox module we have all basic tools already in the initrd- _unitdir is always defined nowadays, remove the conditionals.
* Wed Apr 09 2014 sfalkenAATTopensuse.org- Replaced dracut tarball with proper upstream tarball Add: dracut-037.tar.xz
* Tue Apr 08 2014 hareAATTsuse.de- Update dracut to 037
* Add --hostonly_cmdline switch
* Update --mount syntax
* Include modules from /updates directory
* Fixes for network setup
* Some small fixes- Rediff patches- Include iscsiuio again (bnc#872474) Remove: remove-iscsiuio.patch- Install 59-scsi-sg_utils.rules (bnc#872478) Add: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch- Install 67-kpartx-compat.rules (bnc#872662) Add: 0016-90multipath-add-67-kpartx-compat.rules.patch- Install separate multipath service file (bnc#871610) Add: 0017-90multipath-install-dracut-specific-service-file.patch- Do not fsck and mount from fstab if systemd is used (bnc# Add: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch- Fixup initqueue for remote-fs Add: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch
* Thu Apr 03 2014 crrodriguezAATTopensuse.org- revert last change, ucode-intel is not mandatory and will get installed by default anyway, either via patterns or by modalias dependencies in the package itself.
* Thu Apr 03 2014 crrodriguezAATTopensuse.org- Require package ucode-intel in x86
*
* Tue Apr 01 2014 nfbrownAATTsuse.com- mdraid-setup.patch Make mdraid scripts work with latest mdadm. Without this, boot from DDF or IMSM array fails if one device is missing (bnc#866660)
* Fri Mar 28 2014 trennAATTsuse.de- systemd always tries to load autofs4 otherwise it reports: Failed to insert module \'autofs4\' dracut already adds it, but only if loaded already. Always load autofs4 even if not already loaded (bnc#869411) Add: dracut-really-always-add-autofs4.patch
* Tue Mar 25 2014 trennAATTsuse.de- Fix installkernel script bnc#862990
* Fri Mar 14 2014 rmilasanAATTsuse.com- Add support for 70-persistent-net.rules in dracut (bnc#868375) Add: dracut-install-persistent-rule.patch
* Fri Mar 14 2014 trennAATTsuse.de- CRITICAL: Fix add-drivers passing from mkinitrd to dracut bnc#868397
* Wed Mar 12 2014 trennAATTsuse.de- Add s390 dcssblk driver and introduce rd.dcssblk= to pass mounts that should get activated at initrd stage fate#308263 Add: s390-dcssblk.patch
* Fri Mar 07 2014 trennAATTsuse.de- bnc#830060 - Dracut is missing warpclock/hwclock Add dracut-warpclock_module.patch
* Wed Mar 05 2014 pwieczorkiewiczAATTsuse.com- wait_for_network_race_condition_fix.patch:
* In case of no network related params are specified, but rd.neednet=1 is set, default initqueue action is to wait until one of the network interfaces is marked as set up properly. (bnc#866771)
* It also helps with initqueue\'s race condition when network interface shows up late.- replace_dhclient_with_wickedd_dhcp_supplicants.patch: Add a missing network setup flag. (bnc#866771)
* Mon Mar 03 2014 trennAATTsuse.de- Merge all dracut-
* packages to one dracut.rpm package. Subpackages only had one or two minor files not worth splitting a package or dracut-network had important modules which should (like former main dracut package) always get installed- libcap does not exist and libcap2 or friends are not needed - > remove Requires: libcap- Reorder (sort) the files section a bit
* Mon Mar 03 2014 trennAATTsuse.de- Fix bug introduced with last commit: Bad whitespace logic when INITRD_MODULES contain more than one module.
* Thu Feb 27 2014 trennAATTsuse.de- Make sure that --add-drivers is not called with whitespace string which will lead to a \"read line\" user input request and things may get stuck at installation. - Add: dracut-fix-whitespace-add-drivers_call.patch- Remove s390 grub module again -> this will go into grub2 package (ask rwAATTsuse.de for details) Delete/remove: s390_add-user-space-grub-rule.patch- Add installkernel script which installs the kernel when: make install is invoked. The script from mkinitrd has been taken over and adopted. Added source: dracut-installkernel bnc#862990
* Fri Feb 21 2014 trennAATTsuse.de- Fix syntax error -> missing then- Correct path, it is /usr/bin/grub2-emu
* Mon Feb 17 2014 trennAATTsuse.de- autofs4 is always included since mainline git commit: 314929920f27448b45bfd systemd: ensure autofs4 and ipv6 are included- Always add network and iscsi dracut module, so that ibft, iscsi, nfsroot work as expected.
* Fri Feb 14 2014 pwieczorkiewiczAATTsuse.com- change_write_ifcfg_to_suse.patch: Detect the system flavor and write the ifcfg files accordingly.
* Fri Feb 14 2014 trennAATTsuse.deOriginally by Hannes Reinecke (hareAATTsuse.de):- Install new s390x specific udev rules (bnc#856585) - Add: 0015-add-new-s390x-specific-rule-files.patch- Do not check for non-existing dasd_configure for s390x (bnc#856585)
* Thu Feb 13 2014 jjollyAATTsuse.com- Added 95grub2 module for s390x
* Thu Feb 13 2014 pwieczorkiewiczAATTsuse.com- remove-iscsiuio.patch: Remove iscsiuio references as this one is not present in SLE-12.
* Thu Feb 13 2014 pwieczorkiewiczAATTsuse.com- fix-iscsi-firmware.patch: Fix iSCSI iBFT boot up problem introduced with mainline changes
* Thu Feb 13 2014 pwieczorkiewiczAATTsuse.com- replace_dhclient_with_wickedd_dhcp_supplicants.patch: Replace dhclient with wickedd-dhcp4 and wickedd-dhcp6. Script up dhcp functionality in ifup.sh.
* Thu Feb 13 2014 sfalkenAATTopensuse.org-Added bug number to previous changelog entry
* Thu Feb 13 2014 sfalkenAATTopensuse.org-Updated suse_grub_manpage.patch to further correct for incorrect grub configuration paths bnc#858448
* Wed Feb 12 2014 sfalkenAATTopensuse.org-Updated suse_grub_manpage.patch for dracut-036
* Wed Feb 12 2014 sfalkenAATTopensuse.org-Added patch to fix manpage to reflect openSUSE GRUB Legacy and GRUB2- removed patches:
* dracut_git_v034_to_head.patch
* Sun Feb 09 2014 tchvatalAATTsuse.com- Cleanup with spec-cleaner.
* Sun Feb 09 2014 tchvatalAATTsuse.com- Version bump to 036 removing the need for patching from git.- removed patch:
* dracut_git_v034_to_head.patch
* Fri Jan 31 2014 trennAATTsuse.de- Do not show usage error when no kernel was found. This may happen several times at package installation time and floods the logs. Modify dracut_do_not_update_booloader_if_no_kernel_is_found.patch
* Tue Jan 14 2014 trennAATTsuse.de- Correctly fix previous issue: Exit without calling update-bootloader (bnc#858268) Currently mkinitrd will always exit early without creating an initrd at all. Rebase: dracut_do_not_update_booloader_if_no_kernel_is_found.patch- Remove an obsolete comment from .spec file
* Mon Jan 13 2014 trennAATTsuse.deExit without calling update-bootloader (bnc#858268): Add: dracut_do_not_update_booloader_if_no_kernel_is_found.patch Adding: Requires: systemd-sysvinit which has reboot, halt and other binaries dracut likes to add to the initrd. Cleanup and adjust to latest mainline: Dropping as these are included in the latest update_git_v034_to_head patch: Drop: 0001-95dasd-Install-kernel-modules-only-once.patch Drop: 0002-95dasd-Only-install-module-if-normalize_dasd_arg-is-.patch Drop: 0003-95dasd_mod-make-dasd_cio_free-optional.patch Drop: 0004-95zfcp-Make-installation-optional.patch Drop: 0005-95znet-Make-installation-optional.patch Drop: 0007-Fixup-keymap-setting-for-openSUSE.patch Drop: 0008-Add-DASD-configuration-for-SuSE.patch Drop: 0009-Add-zfcp-scripts-for-SUSE.patch Drop: 0010-Make-logfile-configurable.patch Drop: 0011-mkinitrd-suse-Add-SUSE-compability-wrapper-for-dracu.patch Drop: 0012-mkinitrd-suse.8.asc-Add-manpage-for-SUSE-compat-mkin.patch Drop: 0015-Fixup-script-permissions.patch Drop: 0016-Remove-shebang-from-shell-completion-files.patch Drop: dracut-git-update.patch Rebase: 0013-Correct-paths-for-openSUSE.patch This is a rename of dracut-git-update.patch to: Add: dracut_git_v034_to_head.patch
* Fri Dec 20 2013 trennAATTsuse.de- Cleanup: Remove %define replace_mkinitrd 1 and related conditionals in .spec file -> One either has to install dracut or mkinitrd and it will stay like that.
* Wed Dec 18 2013 trennAATTsuse.de- Add purge kernel service/feature which before was part of mkinitrd bnc#854348
* Thu Nov 28 2013 hareAATTsuse.de- Update with patches from git repository:
* kernel-modules: add ohci-pci to the list of forced module installs
* Run \'xz\' and \'lzma\' with multiple threads
* systemd: do not exit the initqueue, if systemd asks a password
* iscsi,nbd: do not fail in hostonly mode
* dracut-functions.sh: Avoid loading unnecessary 32-bit libraries for 64-bit initrds
* fips: also install /etc/system-fips in the initramfs
* dracut.modules.7.asc: removed empty section
* dracut.sh: fixed PATH shortener
* dracut.spec: move /sbin/dracut to /usr/sbin/dracut
* iscsi/nbd: do not try to mount the whole disk, if root= is missing
* fips: include crct10dif_generic
* Handle crypto modules with and without modaliases
* usrmount/module-setup.sh: fixed typo
* lvm: always install thin utils for lvm
* kernel-modules(ARM): add mmc_block usb_storage to static list of kernel mods
* dracut-functions.sh:check_block_and_slaves
*() skip LVM internal devs
* mkdir basic dirs in /run
* network/fcoe: only redirect output to loginit.pipe, if exists
* dracut.sh: no need to make subdirs in run
* dracut.sh: also mkdir /run/lock, which is copied to
* lvm: fix thin recognition
* Add lzo, lz4 compression and read INITRD_COMPRESS
* remove resume-genrules.sh
* resume: fix swap detection in hostonly
* base/init.sh: also mkdir /run/lock
* dmsquash-live: add /dev/mapper/live-base
* Doc: cleanup, extend and split and reuse
* dracut.sh: do not bail out, if kernel modules dir is missing
* 10i18n/parse-i18n.sh: parse rd.vconsole and rd.locale
*
*/module-setup.sh: add comments for dracut called functions
* lvm: install thin utils for non-hostonly- Patches for S/390 support
* 95dasd: Install kernel modules only once
* 95dasd: Only install module if normalize_dasd_arg is present
* 95dasd_mod: make dasd_cio_free optional
* 95zfcp: Make installation optional
* 95znet: Make installation optional
* Install /bin/mount
* Fixup keymap setting for openSUSE
* Add DASD configuration for SuSE
* Add zfcp scripts for SUSE
* Make logfile configurable
* Add SUSE compability wrapper for dracut
* Add manpage for SUSE compat mkinitrd
* Work around xsltproc bug
* Correct paths for openSUSE
* Check for plymouth lib directories- Drop obsolete patches- Install mkinitrd-suse
* Mon Oct 21 2013 hrvoje.senjanAATTgmail.com- Remove not needed logrotate Requires
* Thu Oct 17 2013 crrodriguezAATTopensuse.org- remove use_all_paths_udev.patch, /lib/udev.. is a symlink to /usr nowadays this confuses other parts of the code causing errors/warnings during the initrd generation.
* Mon Oct 14 2013 crrodriguezAATTopensuse.org- version 034
* fcoe: add FCoE UEFI boot device support
* rootfs-block: add support for the rootfallback= kernel cmdline option
* btrfs: use inst_hook to install the timeout hook
* Sun Oct 13 2013 tittiatcokeAATTgmail.com- Correct patch mkinitrd-fix-boot-dir-detection. (\";;\" doesn\'t really work)
* Wed Oct 09 2013 tittiatcokeAATTgmail.com- Updated the patch mkinitrd-fix-boot-dir-detection.patch to a more generic validation that the inidcated initrd file doesn\'t contain a path. If no path is given, then add the default boot_dir.
* Tue Oct 08 2013 tittiatcokeAATTgmail.com- Fix again the mkinitrd script as that people don\'t seem to test. Added mkinitrd-fix-boot-dir-detection.patch so that an initrd is created.
* Mon Oct 07 2013 trennAATTsuse.de- Update to mainline git version 033, b7d1b6f904a5b0bdd9a5ad19149f3.- Remove all patches which went mainline: generalize_early_cpio.patch microcode_cleanup.patch acpi_override.patch mkinitrd_allow_no_option.patch mkinitrd_allow_multiple_args.patch quiet_options.patch implement_default.patch root_fs.patch suse_host_only.patch- Fix missing root fs slash in lib/udev/rules.d resulting in: /var/tmp/initramfs.Lusf6flib/udev/rules.d- bcache: removed, it\'s in the upstream bcache-tools package mainline git commit: 49268028b90f6344f79e3510d2- Fix bad she-bang in mkinitrd_setup_dummy
* Fri Oct 04 2013 tittiatcokeAATTgmail.com- Add patch mkinitrd_update_bootloader.diff so that after generating the initrd, the update-bootloader is called to update grub2.
* Fri Oct 04 2013 tittiatcokeAATTgmail.com- Validate that the parameters passed with -i (initrd file) does not already contain the boot_dir.
* Fri Oct 04 2013 tittiatcokeAATTgmail.com- Bring back the versioned Provides/Obsoletes for mkinitrd. Otherwise we run into issues as that udev is conflicting with mkinitrd < 2.7.0
* Wed Oct 02 2013 trennAATTsuse.de- Remove Provides/Obsoletes: mkinitrd versioning. Simply obsolete and provide all mkinitrd versions.
* Wed Oct 02 2013 mvyskocilAATTsuse.com- Mark /etc/dracut.conf.d/02-early-microcode.conf as config file
* Wed Sep 25 2013 trennAATTsuse.de- Add ACPI table override ability: generalize_early_cpio.patch #PATCH-FIX-UPSTREAM microcode_cleanup #PATCH-FIX-UPSTREAM acpi_override.patch #PATCH-FIX-UPSTREAM- This will replace mkinitrd with dracut as the default initrd generator. Therefore Prefer: dracut tag in the project config of the repo is needed. Otherwise OSC does not know how to build installation-images (needing mkinitrd to build) and which package to take.- To switch back and try mkinitrd instead of dracut will be: Uninstall dracut: - rpm -e dracut --nodeps And install mkinitrd again: - zypper install mkinitrd- Adjust mkinitrd-dracut.sh to SUSE mkinitrd: : Before gives a \"usage\" error -> now scans /boot for kernels and builds corresponding inirtrds for them - i -k : Pass a list of kernels and initrd targets (not sure it was worth the hassle to be able to pass) - b : Boot directory to search for kernel images - d : Change root file system. Not tested whether dracut\'s behavior matches exactly what our mkinitrd does. - s : Dummy (should even be obsolete in latest mkinitrd) These patches have been submitted, but now feedback from mainline yet: mkinitrd_allow_no_option.patch mkinitrd_allow_multiple_args quiet_options implement_default root_fs suse_host_only- Write caller and used parameters to syslog if mkinitrd is called. So that those can easily be fixed and checked for correctness. This should get reverted again before a bigger release. This patch will never show up mainline and should also get reverted from SUSE factory repo before the next release shows up: suse_only_logger- Build host only images for default paths in SUSE for faster build and smaller images. Imply --force in this case as well.
* suse_host_only.patch
* Sat Sep 21 2013 crrodriguezAATTopensuse.org- save a few seconds on boot by always including the autofs4 kernel module in the initrd
* Sat Sep 21 2013 crrodriguezAATTopensuse.org- dracut 033- improved hostonly device recognition- improved hostonly module recognition- do not install udev rules from /etc in generic mode- fixed LABEL= parsing for swap devices- fixed iBFT network setup- removed caching of kernel cmdline- bcache: support new blkid- ifup with dhcp, if no \"ip=\" specified for the interface- fixed ifup udev rules
* Mon Sep 09 2013 crrodriguezAATTopensuse.org- After testing, we need to correct a major problem, /usr/bin/mount most be installed in /bin/mount on the initrd otherwise boot fails.
* Mon Sep 09 2013 crrodriguezAATTopensuse.org- version 032- add parameter --print-cmdline- dracut now creates the initramfs without udevadm that means the udev database does not have to populated and the initramfs can be built in a chroot with /sys /dev /proc mounted.- renamed dracut_install() to inst_multiple() for consistent naming- if $libdirs is unset, fall back to ld.so.cache paths- always assemble /usr device in initramfs- bash module added (disable it, if you really want dash)- continue to boot, if the main loop times out, in systemd mode- removed inst
*() shell pure versions, dracut-install binary is in charge now- fixed ifcfg file generation for vlan- do not include adjtime and localtime anymore- fixed generation of zfcp.conf of CMS setups- install vt102 terminfo- dracut_install() is still there for backwards compat- do not strip files in FIPS mode- fixed iBFT interface configuration- fs-lib: install fsck and fsck.ext
*- shutdown: fixed killall_proc_mountpoint()- network: also wait for ethernet interfaces to setup- fixed checking for FIPS mode
* Mon Aug 05 2013 crrodriguezAATTopensuse.org- version 031_git201308011055
* systemd: add support for kmod static devnodes
* crypt: Wait for udev to settle before unlocking disk
* systemd/dracut-pre-trigger.service: run after systemd-tmpfiles-setup-dev
* systemd: use systemd in the initramfs, if installed on the system
* Sat Aug 03 2013 tittiatcokeAATTgmail.com- Drop the buildrequire for the microcode_ctl. This package is no longer in Factory and with the latest kernel (3.11) no longer required.
* Sun Jul 28 2013 crrodriguezAATTopensuse.org- version 030_git201307241235
* systemd: Replace prefdm.service with display-manager.service
* modsign: do not install, if no keys present
* bcache: add support for bcache
* Use systemd-cat for logging on systemd systems, if logfile is empty
* Sun Jul 21 2013 tittiatcokeAATTgmail.com- Remove the http link for the Source0. Git snapshots can not be obtained that way.
* Wed Jul 17 2013 crrodriguezAATTopensuse.org- Version 029_git201307171236
* support early microcode loading in x86
* Thu Jun 27 2013 crrodriguezAATTopensuse.org- Require pigz instead of gzip
* Tue Jun 18 2013 crrodriguezAATTopensuse.org- version 029
* fixes for the networking modules
* fixes for systemd integration
* fixes for the i18n module (removes dracut-font.patch now upstream)
* Thu Jun 06 2013 crrodriguezAATTopensuse.org- version 027_git201306061213
* setup correct system time and time zone in initrd
* systemd integration bugfixes
* lvm bugfixes.
* Wed May 08 2013 crrodriguezAATTopensuse.org- Recommend pigz for faster/parallel compression
* Sat Apr 20 2013 crrodriguezAATTopensuse.org- Ensure we use display-manager.service instead of prefdm.
* Mon Apr 15 2013 crrodriguezAATTopensuse.org- Update to 027_git201304121327
* much of patch correct-paths-for-opensuse.patch is no longer need so it has shrinked significantly.
* since PRE-027 dracut requires systemd >= 199 reflect that in in the rpm buildRequires.
* Wed Apr 03 2013 tittiatcokeAATTgmail.com- dracut-027
* systemd module now requires systemd >= 199
* dracut makes use of native systemd initrd units
* added hooks for new-kernel-pkg and kernel-install
* hostonly is now default for fedora
* comply with the BootLoaderSpec paths http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
* added rescue module
* host_fs_types is now a hashmap
* new dracut argument \"--regenerate-all\"
* new dracut argument \"--noimageifnotneeded\"
* new man page dracut.bootup
* install all host filesystem drivers
* use -D_FILE_OFFSET_BITS=64 to build dracut-install
* Tue Mar 19 2013 crrodriguezAATTopensuse.org- Update to 026_git201303180829
* bugfixes
* adds bash completion Support- Most importantly, fix the (silly) compatibility patch that changes the name from initramfs to initrd that went broken in last update (all initrds were suffixed by .img)
* Tue Mar 12 2013 crrodriguezAATTopensuse.org- dracut-026- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory /usr/lib/dracut/dracut.conf.d/
*.conf can be overwritten by the same filenames in /etc/dracut.conf.d. Packages should use /usr/lib/dracut/dracut.conf.d rather than /etc/dracut.conf.d for drop-in configuration files. /etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.- uses systemd-198 native initrd units- totally rely on the fstab-generator in systemd mode for block devices- dracut systemd now uses dracut.target rather than basic.target- dracut systemd services optimize themselves away- fixed hostonly parameter generation- turn off curl globbing (fixes IPv6)- modify the udev rules on install and not runtime time- enable initramfs building without kernel modules (fixed regression)- in the initqueue/timeout, reset the main loop counter, as we see new udev events or initqueue/work- fixed udev rule installation
* Fri Feb 22 2013 crrodriguezAATTopensuse.org- Update to 025_git201302211113
* Support out-of-tree and updated drivers in initramfs creation
* shutdown: call \"losetup -D\" on shutdown
* Mount /proc before including dracut-lib.sh.
* dracut.sh: make /var/log a symlink to /run/log
* systemd/dracut-pre-pivot.sh: remove /dev/root symlink after shell
* kernel-modules: Add ehci support for kernel 3.8+
* Other bugfixes
* Sun Feb 03 2013 crrodriguezAATTopensuse.org- BuildRequires: pkgconfig(systemd) so %{_unitdir} is defined and systemd integration works..
* Mon Jan 28 2013 crrodriguezAATTopensuse.org- Require modutils instead of module-init-tools.
* Thu Jan 24 2013 hrvoje.senjanAATTgmail.com- Update to release 025: + do not strip signed kernel modules + add sosreport script and generate /run/initramfs/sosreport.txt + make short uuid specification for allow-discards work + turn off RateLimit for the systemd journal + fixed MAC address assignment + add systemd checkisomd5 service + splitout drm kernel modules from plymouth module + add \'swapoff\' to initramfs to fix shutdown/reboot + add team device support + add pre-shutdown hook + kill all processes in shutdown and report remaining ones + \"--device\" changed to \"--add-device\" and \"add_device=\" added for conf files + add memory usage trace to different hook points + cope with optional field #7 in /proc/self/mountinfo + lots of small bugfixes
* Thu Dec 06 2012 crrodriguezAATTopensuse.org- dracut wants \"strip\" installed which is part of binutils recommend that package
* Mon Nov 05 2012 tittiatcokeAATTgmail.com- Added additional patches to make dracut work in an openSUSE environment.- Added patch (use_all_paths_udev.patch) to use both /usr/lib/udev and /lib/udev as long as not all packages migrated.- Added patch (use_initrd_insteadof_initramfs.patch) to change the naming of the generated initrd file to be more openSUSE- Added patch (use_sysconfig_values_correctly.patch) to read the correct keymap value from /etc/sysconfig. (.gz extension)
* Thu Nov 01 2012 tittiatcokeAATTgmail.com- Update to release 024: + new dracut option \"--device\" + new dracut kernel command line options \"rd.auto\" + new dracut kernel command line options \"rd.noverifyssl\" + new dracut option \"--kernel-cmdline\" and \"kernel_cmdline\" option for default parameters + fixes for systemd and crypto + fix for kexec in shutdown, if not included in initramfs + create the initramfs non-world readable + prelink/preunlink in the initramfs + strip binaries in the initramfs by default now + various FIPS fixes + various dracut-install fixes- Added patch (correct-paths-for-opensuse.patch) to ensure correct paths for openSUSE (Plymouth)
* Fri Sep 28 2012 fcrozatAATTsuse.com- Add initramfs-non-world-readable.patch: fix CVE-2012-4453 (bnc#782734).
* Wed Aug 01 2012 fcrozatAATTsuse.com- Update to release 023: + resume from hibernate fixes + -N option for --no-hostonly + support for systemd crypto handling + new dracut module \"crypt-loop\" + deprecate the old kernel command line options + more documentation + honor CFLAGS for dracut-install build + multipath fixes + / is mounted according to rootflags parameter but forced ro at first. Later it is remounted according to /etc/fstab + rootflags parameter and \"ro\"/\"rw\". + support for xfs / reiserfs separate journal device + new \"ro_mnt\" option to force ro mount of / and /usr + root on cifs support + dracut-install: fixed issue for /var/tmp containing a symlink + only lazy resolve with ldd, if the /var/tmp partition is not mounted with \"noexec\". + i18n: fixed inclusion of \"include\" keymaps- Drop dracut_makefile_cflags_pass.patch and separate-journal.patch (merged upstream)
* Mon Jul 23 2012 fcrozatAATTsuse.com- Update to release 022: + fixed host-only kernel module bug- Changes from release 021: + fixed systemd in the initramfs (requires systemd >= 187) + dracut-install: massive speedup with /var on the same filesystem with COW copy. + dracut-install: moved to /usr/lib/dracut until it becomes a general purpose toot + new options: \"rd.usrmount.ro\" and \"rd.skipfsck\" + less mount/umount + apply \"ro\" on the kernel command line also to /usr + mount according to fstab, if neither \"ro\" or \"rw\" is specified + skip fsck for xfs and btrfs. remount is enough + give emergency_shell if /usr mount failed + dracut now uses getopt: - options can be position independent now!! - we can now use --option= + added option \"--kver=\", and the image location can be omitted : dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64 + dracut.sh: for --include copy also the symbolic links + man pages: lsinitrd and mkinitrd added + network: We do not support renaming in the kernel namespace anymore (as udev does that not anymore). So, if a user wants to use ifname, he has to rename to a custom namespace. \"eth[0-9]+\" is not allowed anymore. + resume: moved the resume process to the initqueue. This should prevent accidently mounting the root file system. + improve running testsuite- Clean up package to be openSUSE only package and follow openSUSE standard.- Add dracut module to convert openSUSE/SLE initrd cmdline parameters into dracut parameters at boot time.- Add separate-journal.patch: add support for separate journal for reiserfs and XFS.
* Thu Jul 12 2012 trennAATTsuse.de- First check in of version 020- Fix Makefile so that make -e CFLAGS=\"$RPM_OPT_FLAGS\" can be passed- Remove Requires on libcap- some more changes, most sent mainline