Changelog for python3-basemap-1.0.8.dev2414.gitf70b00c-6.18.x86_64.rpm :
Wed Jun 14 14:00:00 2017 urs.beyerleAATTenv.ethz.ch
- Add conficts to python2 packages

Tue Sep 15 14:00:00 2015 ocefpafAATTgmail.com
- Updated to release 2414+gitf70b00c; Version 1.0.8

* add \'textcolor\' kwarg to drawmeridians and drawparallels (issue 145).

* don\'t assume grid is regular with adding cyclic point in addcyclic.
New kwarg \'cyclic_dimension\' added, with a default of 360. Partially
addresses issue 139.

* fix for coastline drawing glitch (issue 123).

* update shapefile.py to version 1.2.0 from pyshp.googlecode.com. Add back
in modification clobbered in upgrade to version 1.1.7 (issue 30).

* added \'facecolor\' keyword argument to drawcounties() method; gives user
ability to fill countries with specified matplotlib color argument.

* fix drawgreatcircle bug so that lines exiting and reentering a projection
region don\'t draw horizontally across the map.

* on non-windows platforms, only link against libgeos C API (and not against
C++ API anymore; issue 140). This is recommended by the authors/maintainers
of GEOS. Also, this means that on e.g. Debian Linux, basemap can now be
installed from source simply using \'pip install basemap\' when the libgeos
packages are installed globally using the package management.

Sat Sep 21 14:00:00 2013 ocefpafAATTgmail.com
- Updated to release 2336; version 1.0.7

* include mpl_toolkits/__init__.py, since the one installed by matplotlib
is now inaccessible inside an egg (in 1.4.x). Make basemap a \'namespace
package\'. Issue 114.

* fix drawmeridians so meridians reach edge of plot when map projection
region is
*very
* small (issue 113).

* update pyproj (with fixes to geodesic calculations).

* support for rotated pole transformation (projection = \'rotpole\').

* fix warpimage with projection = \'hammer\' (issue 100).

* fix tolerances for detecting jumps in meridians and parallels for
cyl and rotpole projections (issue 108).

* fix clipping to map projection region done in contourf and contour methods
so it doesn\'t assume x and y are increasing (issue 110).

Sat Jun 29 14:00:00 2013 ocefpafAATTgmail.com
- Updated to release 2311; version 1.0.6

* fix drawcounties for Python 3.3.

* update pyproj to version 1.9.3 (remove geographiclib python code, replace
with C code from proj4).

* in contourf and contour, all points outside the map projection
region were masked. This meant that if a grid cell was partly inside and
partly outside the map projection region, nothing was drawn, leaving a
gap along the edge of the map. This was particularly noticeable for very
coarse resolution grids. This commit only masks those points more than
one grid length beyond the edge of the map projection region.
Fixes issue 88.

* allow for latitude values slightly greater than 90 to exist in shapefiles,
(by truncating to 90). Still raise exception if latitude exceeds 90.01.

* added \'wmsimage\' method for displaying background image retrieved from
a OGC-compliant WMS server using OWSLib (http://pypi.python.org/OWSLib)
(requires using \'epsg\' keyword to define projection).

* fix drawing of meridians and parallels for very small map regions
(issue 79).

* add module variable \'latlon_default\' that can be used to switch
default value of latlon kwarg to True so plotting methods can be
passed lats and lons (geographic coordinatsin degrees) instead
of x,y (projection coordinates).

* have drawcoastlines use line segments instead of coastline polygons, to
avoid \'thickening\' of lines around edges of map.

* added support for cylindrical equal area (\'cea\') projection.

* add \'arcgisimage\' method for displaying background image retrieved from
an ArcGIS server using the REST API (requires using \'epsg\' keyword to
define projection).

* add \'epsg\' keyword for defining projections.

* add \'ellps\' keyword (rsphere ignored if ellps given).

* fixed shiftdata method so it shifts mask along with data
(https://github.com/matplotlib/basemap/pull/68).

* added linestyle keyword to all draw
* methods.

* added \'drawcounties\' method (https://github.com/matplotlib/basemap/pull/65)
thanks to Patrick Marsh.

* fix bug that caused plotting to fail when latlon keyword is
explicitly set to False (https://github.com/matplotlib/basemap/pull/66).

* add latlon keyword to plot and scatter methods
(https://github.com/matplotlib/basemap/pull/64).

Sun Aug 12 14:00:00 2012 ocefpafAATTgmail.com
- updated to release 2149; version 1.0.5

* fix bug triggered when drawlsmask method called more than once.

* fix error in contour method that caused a bogus mask to be applied
to the data (issue 58).

* fix further corner cases with splitting of parallels that cross
the dateline (issue 40).

* add latlon keyword to plotting methods. If latlon=True, x and y
values are assumed to longitudes and latitudes in degrees. The
data and longitudes are shifted to the map projection region (for
cylindrical and pseudo-cylindrical projections) using the shiftdata
method, and lons/lats are converted to map projection coords. Default
value is False. Addresses issue 54. New example shiftdata.py added
to illustrate usage.

* fix bluemarble and warpimage methods to account for change in orientation
of arrays returned to matplotlib\'s pil_to_array (issue 51)

* fix glitch with drawing meridians and filling coastline polygons with
omerc projection that includes pole.

Tue Jun 26 14:00:00 2012 ocefpafAATTgmail.com
- updated to release 2076; version 1.0.4

* fix bug that caused Europe coastlines to disappear from some maps
(evident from nytolondon.py example).

* fix splitting of parallels in conic projections that cross the dateline
(issue 40).

Wed May 30 14:00:00 2012 ocefpafAATTgmail.com
- updated to release 2052; version 1.0.3

* fix some more python 3 compatibility issues (all examples
now work with python 3.2).

* added alpha keyword to fillcontinents (to set transparency).

* update geos from 3.3.1 to 3.3.3.

* upgrade proj4 source to version 4.8.0, pyproj to version 1.9.2.

* add k_0 keyword for projection = \'tmerc\' so UTM zones can be
created. Also can be used with \'lcc\',\'omerc\' and \'stere\'.

* Added \"utmtest.py\" example.

* add streamplot method, along with streamplot_demo.py example.

* add boundarylats, boundarylons Basemap attributes (arrays
describing map boundaries - useful for illustrating map projection
region on another map). Example illustrating usage
(make_inset.py) added.

* update coastlines, rivers, political boundaries to GSHHS
2.2.0/GMT 4.5.7. The fillcontinents bug (filling the outside
instead of the inside of a coastline polygon) is now much
harder to trigger.

* add \'round\' keyword keyword to Basemap.__init__ for pole-centered
projections to make them round (clipped at boundinglat) instead
of square.

* added hexbin method.

* drawmapboundary now uses axes bgcolor as default fill_color. If
no color fill wanted, set fill_color=\'none\' (a string).

* clip coastlines for nplaea,npaeqd,splaea,spaeqd in stereographic
coordinates to avoid S. America disappearing in some south polar
plots.

* add \'round\' keyword to Basemap.__init__ for pole-centered
projections to make them round (clipped at boundinglat) instead
of square.

* fix broken daynight terminator function.

* added kav7 (Kavrayskiy VII) and eck4 (Eckert IV) projections
(https://github.com/matplotlib/basemap/issues/9).

* update pyproj source from pyproj.googlecode.com. Includes
new more robust and accurate pure python code for geodesic computations
from geographiclib.

* bug fixes for celestial projections, and non-standard sphere
radii (https://github.com/matplotlib/basemap/pull/6).

* fix bug in drawparallels that results in \'KeyError\' when drawing
parallels very close together (0.1 degrees).

* fix constant in Robinson projection (update PJ_robin.c
from proj4 svn).

* fix typo in setup.py (replace \"!= [\'sdist\',\'clean\']\" with
\"not in [\'sdist\',\'clean\']\").

* make sure drawmeridians can handle wrap-around (so that
if projection is defined in -180 to 0 and user asks for
meridians from 180 to 360 to be drawn, it should work).
Only affects projections \'mill\',\'gall\',\'merc\' and \'cyl\'.

Fri Nov 25 13:00:00 2011 ocefpafAATTgmail.com
- updated to release 1840

* fix constant in Robinson projection (update PJ_robin.c
from proj4 svn).

Mon Nov 14 13:00:00 2011 ocefpafAATTgmail.com
- updated to release 1838

* fix typo in setup.py (replace \"!= [\'sdist\',\'clean\']\" with
\"not in [\'sdist\',\'clean\']\").

Sat Nov 5 13:00:00 2011 ocefpafAATTgmail.com
- updated to release 1832

* update include geos from 3.2.0 to 3.3.1 so it compiles with gcc
4.6.

Sat Oct 29 14:00:00 2011 ocefpafAATTgmail.com
- updated to release 1828

* added colorbar method that uses axes_grid toolkit to
create colorbar axes.

Sat Oct 22 14:00:00 2011 ocefpafAATTgmail.com
- updated to release 1822

* replace hasattr(arr,\'mask\') with numpy.ma.isMA(arr).

Sat Oct 15 14:00:00 2011 ocefpafAATTgmail.com
- updated to release 1801

* docs updated, moved to matplotlib.github.com/basemap.

* added optional 1.25, 2.5 and 10 minute land/sea masks (derived
from crude, intermediate and low resolution coastline data).
\'resolution\' and \'grid\' kwargs added to drawlsmask and maskoceans.
\'resolution\' can be \'c\',\'l\' or \'i\', grid can be 1.25,2.5,5 or 10.

Mon Oct 10 14:00:00 2011 ocefpafAATTgmail.com
- updated to release 1768

* update shapefile.py from pyshp.googlecode.com to r72.

Thu Oct 6 14:00:00 2011 ocefpafAATTgmail.com
- updated to release 1767

Sat Sep 24 14:00:00 2011 ocefpafAATTgmail.com
- updated to release 1762

Sat Aug 6 14:00:00 2011 ocefpafAATTyahoo.com.br
- updated to release 1761

* change default land-sea mask (now 2.5 minute resolution).

* add etopo method (similar to bluemarble, but plots etopo
relief image from www.ngdc.noaa.gov/mgg/global as a map bac
ground).

* add shadedrelief method (similar to bluemarble, but plots
shaded relief image from naturalearthdata.com as a map background).

* replace pyshapelib with pure python shapelib.py from
pyshp.googlecode.com. Allows full python 3 compatibility.

* fix doc/conf.py to use inheritance_diagram from Sphinx, not
matplotlib.

* fix drawlsmask so cylindrical projections work correctly when
longitude range outside of -180 to 180.

* python 3 compatibility.

* added lic_demo.py to examples (line integral convolution,
requires scikit.vectorplot).

* removed deprecated NetCDFFile.

* added zorder keyword to drawmapscale.

Mon Mar 14 13:00:00 2011 ocefpafAATTyahoo.com.br
- added patch to fixe pyproj_datadir

Sat Mar 12 13:00:00 2011 ocefpafAATTyahoo.com.br
- updated to revision 1734 (GIT)

Sat Feb 19 13:00:00 2011 ocefpafAATTyahoo.com.br
- updated to revision 8988

Sat Feb 12 13:00:00 2011 ocefpafAATTyahoo.com.br
- updated to revision 8982; version 1.0.2

Sat Feb 5 13:00:00 2011 ocefpafAATTyahoo.com.br
- updated to svn revision 8945

Thu Jan 6 13:00:00 2011 ocefpafAATTyahoo.com.br
- updated to svn revision 8900

Sun Jan 2 13:00:00 2011 ocefpafAATTyahoo.com.br
- updated to svn revision 8868

Sun Dec 5 13:00:00 2010 ocefpafAATTyahoo.com.br
- updated to svn release 8814

Fri Nov 12 13:00:00 2010 ocefpafAATTyahoo.com.br
- updated to svn 8797

Sat Oct 23 14:00:00 2010 ocefpafAATTyahoo.com.br
- updated to svn 8763

Sun Oct 10 14:00:00 2010 ocefpafAATTyahoo.com.br
- fix datadir patch

Wed Oct 6 14:00:00 2010 ocefpafAATTyahoo.com.br
- update to 8731

Tue Jun 29 14:00:00 2010 Filipe Fernandes - 1.0
- svn 8477

Mon Jun 21 14:00:00 2010 Filipe Fernandes - 1.0
- svn 8450

Tue May 25 14:00:00 2010 Filipe Fernandes - 1.0
- svn 8335

Wed May 19 14:00:00 2010 Filipe Fernandes - 1.0
- svn 8323

Wed Apr 7 14:00:00 2010 Filipe Fernandes - 1.0
- svn 8226

Fri Mar 12 13:00:00 2010 Filipe Fernandes - 1.0
- svn 8189

Fri Mar 5 13:00:00 2010 Filipe Fernandes - 0.99.5
- latest svn

Wed Feb 17 13:00:00 2010 Filipe Fernandes - 0.99.5
- latest svn
- added python-ImagingLib to requirements
- basemap and basemap data were merged into one specfile

Fri Dec 11 13:00:00 2009 Jon Ciesla - 0.99.4-1
- Update to latest upstream.
- Dropped datadir patch, now handled with environment variable.

Fri Sep 4 14:00:00 2009 Filipe Fernandes - 0.99.4
- remove dup files pyc/pyo
- remove shapelib dependency (let it install default)
- remove data dir (lib/mpl_toolkits/basemap/data/) from source
- upgrade to version 0.99.4
- update libgeos-devel, libproj-devel
- new patch python-basemap-0.99.4-datadir.patch
- change gz to bz2

Wed Sep 2 14:00:00 2009 Filipe Fernandes - 0.99.2
- first release

Sun Jul 26 14:00:00 2009 Fedora Release Engineering - 0.99.2-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

Mon Jul 20 14:00:00 2009 Caolán McNamara - 0.99.2-4
- Resolves: rhbz#511576 FTBFS showimg numpy -> numpy-f2py