SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG

 
 
Changelog for python-hamlib-3.2_git20170812-1.1.x86_64.rpm :
Sun Aug 13 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170812
Add best guess transmit status to rig state structure
Take out unecessary delays in K(X)3(S) back end

Tue Aug 8 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170803
Fix off-by-one issue in reading memory mode from IF command response
Fix some issues with commands not supported by TS-2000 CAT emulations

Fri Jul 28 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170728
Update ax_python_devel.m4 macro
Bindings tweaks for Python and TCL
Fix TCL script test target--check-tcl
Apply silent rule variables to Python
Apply silent rules to Perl to the extent possible
Apply silent rules to LUA
Rename autogen.sh to bootstrap to follow GNU guidelines
Install certain top level files into docdir

Thu Jul 20 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170720
IC-M710 now working with WSJST-X
Initial Python3 build steps and test script
Add icm710.h to icmarine Makefile.am

Sun Jul 16 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170716
Use snprintf throughout kenwood/kenwood.c for buffer safety

Tue Jul 11 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170710
Fix FLRig segfault and strlen cast

Sun Jul 9 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170708
Add FLRig backend
netrigctld enabled to trigger two different CAT commands (Mic or Data)

Fri Jul 7 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170704
Add Barrett 2050 backend

Thu Jun 29 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170628
Fix FT-891/991 behavior with WSJT-X
Fixed indentation warnings detected by newer gcc

Sun Jun 18 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170530
Initial controls for the rs-hfiq sdr
Do not set DTR/RTS on dedicated PTT port if it is already closed

Tue May 30 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170530
Initial controls for the rs-hfiq sdr
Do not set DTR/RTS on dedicated PTT port if it is already closed

Tue May 30 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170523
Fixes for kenwood backends
Stop rigctld and rotctld crashing when service threads cannot
write to clients
New rotator model: SPID MD-01/02 in ROT2 mode
fixed reading the rig\'s return value in newcat_get_tx_vfo

Thu May 11 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170511
Icom IC-R10 & 20 move to beta

Fri Apr 7 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170406
New model: Icom IC-R6
Allow RIG_LEVEL_STRENGTH queries over the network link

Sun Mar 5 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170227
Fix a state machine defect with repeated PTT reset calls
Add Dorji DRA818 modules (VHF and UHF variants)

Sun Feb 19 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170219
Fix some endian issues in the si570/AVR SDR back ends
Added x108g backend
Fix FT-891 recognition
Breakout FT-1000D file for full support
Fix DIG MODE for FT817-ND
Add support for AGC Levels

Sat Jan 28 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170127
Added HPSDR backend
Fix ic785x default addr to 0x8e
Clears potential garbage data in read buffer prior to command being sent
Updated PiHPSDR backend defaults
Use Windows ioctlsocket to avoid buffer overrun
Add get and set split functions for the TS450S
Simplify and fix defects in the FT991 back end
Added HPSDR backend

Sat Jan 7 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170107
Fix ft991_get_mode
New models: IC-7849/IC-7851, FT-891

Sun Dec 25 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.2_git20161225
Fix typos
Corrected a few bugs and rebased from Ervin\'s (HA2OS) pull request.
Added new example to Python demo script (set/get float type level)
Added Lua binding and demo script
Adds test for ID 907 for the Flex 6300
python-binding and lua-binding enabled

Sat Nov 19 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20161119
Move K3 DT0 before mode switch, add version info to electraft rig open,
WSJT-X VOX rig split now works

Tue Nov 8 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20161106
New Perseus model
Fixed buffer overflow in rigctl_parse and rotctl_parse
Changed some modules to LGPL in lieu of GPL
Change the IC7600 & IC7800 set/get mode to versions that support DATA…
fix set_vfo behavior of TS2000
fix NET rigctl

Mon Sep 5 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160904
xg3: fix buffer overflow
Fix issue with TS-570S|D open in rig_caps
Release the serial port used for PTT when possible

Sat Aug 27 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160827
Fix an issue presenting on the Yaesu FT-450(D)
Fix issue with TS-570S|D open in rig_caps
Updated smeter calibration for ic7300

Sun Jun 12 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160611
implemented set_conf, get_conf and Token fast_set_commands for max
throughput
Yaesu Fast Set Commands (High throughput for commands)
added send_morse and civ_version to ic7100/ic7600
added get/set_conf for FT1200, FT2000, FT450, FT5000 and FT9000
Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300
Changes for IC-7300 and IC-7200

Mon May 23 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160521
Do not attempt to query AI state on several Kenwood rigs
Add some functionality to the tmd710
Add send_morse to icom rigs
Do not crash if expected CTCSS tones not sepcified
Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode a…
Initial support for the IC-7300

Mon Apr 4 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160402
Added support for Icom IC-2730
Use rig state rig port retry option rather than from capabilities
Use a sensible port timeout value for the Kenwood TS-850
Make sure right band is used when setting frequency on IC-910(H)
VFO targetable get frequency operation for the Icom IC-910(h)
Better set frequency semantics for the IC-910(h)
Do not swap VFO unnecessarily
Elide unnecessary CAT commands when setting split frequency and mode
Add {get,set}_splitfrequency_mode for the IC-910(H)
Implement rig_{set,get}_split_freq_mode() for IC-756 series.
Initial implementation of rig_{set,get}_split_freq_mode() for FT-857.
Implement combined split VFO frequency and mode setting.
Fixed get_vfo for FT-757GX(II)
Allow the ft757gx to work with WSJT-X
Add 23cms to IC-910(H) backend
Improve IPv6 portability and consistency
Various Yaesu updates
Add get_freq to FRG-100
Favor $HOME over \'~\' in text
Fix a logic error in band detection during IC-910 set frequency
Merge branch \'ic910-set-freq\' of git://git.code.sf.net/u/bsomervi/hamlib

Sat Jan 16 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160115
Fix possible frequency overflow on Kenwood and Yaesu
Install daemon man files to man1
New Prosistel rotor backend from IZ7CRX
Fix missing PKTUSB mode setting code for FT-817 & FT-897

Fri Dec 11 13:00:00 2015 dl8fclAATTdarc.de
- update to version 3.1_git20151207
Fix FT-817/857/897 issues and add some missing functionality
Use correct function to execute set type commands with no response
Add a new command line option \'--no-restore-ai\' (\'-n\') to rigctl
Allow for poor emulations of Kenwood rigs that have no ID command
Attempt to restore AI status on exit
Proper IPv6 and dual stack networking

Sun Nov 22 13:00:00 2015 dl8fclAATTt-online.de
- update to version 3.1_git20151122
Remove unecessary delays from TS-940S backend

Mon Nov 9 13:00:00 2015 dl8fclAATTdarc.de
- update to version 3.1_git20151109
change command validation for Yaesu set commands

Sun Sep 20 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.1_git20150920
fix kenwood_set_mode for ts590s and mode CW, RTTY or AM

Thu Sep 3 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150903
Add library paths for tests

Sat Aug 22 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150822
New CNCTRK rotor backend

Mon Aug 17 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150815
Fixes power level reporting for the Omni VII. Backend is
promoted to STABLE status.
Fixes S meter reporting for FT857 and FT991.
Fixes rig split for FT991. Working now for WSJT-X rig split mode.

Mon Jul 27 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150727
Allows the FT-991 to work with Fake Split in WSJT-X

Fri Jul 17 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150717
Fix for Yaesu FT-991

Fri Jul 3 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150703
Omni VII patch for WSJT-X

Sat May 23 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150523
Omni VII set VFO_CURR correctly

Sun Apr 26 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150425 - beta version
with a lot of new features and new rig backends

Fri Nov 9 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.15.3

Fri Feb 3 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.15

Sun Jul 31 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.14

Sun May 29 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.13.1

Sun Mar 13 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.13

Mon Sep 6 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.2.12

Mon Jun 7 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.2.11

Mon Nov 2 13:00:00 2009 dl8fclAATTdarc.de
- update to version 1.2.10

Sun Mar 1 13:00:00 2009 dl8fclAATTdarc.de
- update to version 1.2.9


  
ICM