Changelog for openal-soft-1.18.2-3.11.i586.rpm :

* Thu Feb 08 2018 dmuellerAATTsuse.com- remove file that has conflicting license in %prep
* Sat Nov 11 2017 aavindraaAATTgmail.com- Update to 1.18.2
* Fixed a crash with the JACK backend when using JACK1.
* FreeBSD: Fixed building with an older freebsd-lib.
* NetBSD: Fixed use of pthread_setnane_np
* NetBSD: OSS now links with libossaudio if found at build time
* Windows: Fixed resetting the FPU rounding mode after some calls
* Windows: Fixed use of SSE intrinsics when building with Clang- Changes for 1.18.1
* Fixed bug where resuming a source may not work
* Fixed PulseAudio playback when the configured stream length is much less than the requested length.
* Fixed MMDevAPI capture with sample rates not matching the backing device.
* Fixed int32 output for the Wave Writer.
* Fixed enumeration of OSS devices that are missing device files.
* Added correct retrieval of the executable\'s path on FreeBSD.
* Added a config option to specify the dithering depth.
* Added a 5.1 decoder preset that excludes front-center output.- Changes for 1.18.0
* Added a build option to embed the default HRTFs into the lib.
* New extensions (AL_EXT_STEREO_ANGLES, AL_EXT_SOURCE_RADIUS, AL_SOFT_gain_clamp_ex, AL_SOFT_source_resampler, AL_SOFT_source_spatialize, and ALC_SOFT_output_limiter)
* Implemented 3D processing for Reverb, Compressor, Equalizer, and Ring Modulator.
* Implemented 2-channel UHJ output encoding (needs to be enabled with a config option to be used)
* Implemented dual-band processing for high-quality ambisonic decoding.
* Implemented distance-compensation for surround sound output.
* Implemented near-field emulation and compensation with ambisonic rendering. Currently only applies when using the high-quality ambisonic decoder or ambisonic output, with appropriate config options.
* Implemented an output limiter to reduce the amount of distortion from clipping.
* Implemented dithering for 8-bit and 16-bit output.
* Implemented a config option to select a preferred HRTF.
* Implemented a run-time check for NEON extensions using /proc/cpuinfo.
* Implemented experimental capture support for the OpenSL backend.
* Fixed building on compilers with NEON support but don\'t default to having NEON enabled.
* Fixed starting a source while alcSuspendContext is in effect.
* Fixed detection of headsets as headphones, with MMDevAPI.
* Added support for AmbDec config files, for custom ambisonic decoder configurations. Version 3 files only.
* Added backend-specific options to alsoft-config.
* Added first-, second-, and third-order ambisonic output formats. Currently only works with backends that don\'t rely on channel labels, like JACK, ALSA, and OSS.
* Added AmbDec presets to enable high-quality ambisonic decoding.
* Added an AmbDec preset for 3D7.1 speaker setups.
* Added documentation regarding Ambisonics, 3D7.1, AmbDec config files, and the provided ambdec presets.
* Added the ability for MMDevAPI to open devices given a Device ID or GUID string.
* Added an option to the example apps to open a specific device.
* Increased the maximum auxiliary send limit to 16 (up from 4). Requires requesting them with the ALC_MAX_AUXILIARY_SENDS context creation attribute.
* Increased the default auxiliary effect slot count to 64 (up from 4).
* Reduced the default period count to 3 (down from 4).
* Slightly improved automatic naming for enumerated HRTFs.
* Improved B-Format decoding with HRTF output.
* Improved internal property handling for better batching behavior.
* Improved performance of certain filter uses.
* Removed support AL_SOFT_buffer_samples and AL_SOFT_buffer_sub_data. This is due to conflicts with AL_EXT_SOURCE_RADIUS.
* Windows: Fixed support for JACK- cleanup with spec-cleaner
* Wed Nov 16 2016 virtuousfoxAATTgmail.com- Add missing dependency for JACK backend
* Thu Feb 11 2016 mpluskalAATTsuse.com- Update to 1.17.2
* Implemented device enumeration for OSSv4.
* Fixed building on non-Windows systems without POSIX-2008.
* Fixed Dedicated Dialog and Dedicated LFE effect output.
* Added a build option to override the share install dir.
* Added a build option to static-link libgcc for MinGW.- Changes for 1.17.1
* Fixed building with JACK and without PulseAudio.
* Fixed building on FreeBSD.
* Fixed the ALSA backend\'s allow-resampler option.
* Fixed handling of inexact ALSA period counts.
* Altered device naming scheme on Windows backends to better match other drivers.
* Updated the CoreAudio backend to use the AudioComponent API. This clears up deprecation warnings for OSX 10.11, although requires OSX 10.6 or newer.- Changes for 1.17.0
* Implemented a JACK playback backend.
* Implemented the AL_EXT_BFORMAT and AL_EXT_MULAW_BFORMAT extensions.
* Implemented the ALC_SOFT_HRTF extension.
* Implemented C, SSE3, and SSE4.1 based 4- and 8-point Sinc resamplers.
* Implemented a C and SSE based band-limited Sinc resampler. This does 12- to 24-point Sinc resampling, and performs anti-aliasing.
* Implemented B-Format output support for the wave file writer. This creates FuMa-style first-order Ambisonics wave files (AMB format).
* Implemented a stereo-mode config option for treating stereo modes as either speakers or headphones.
* Implemented per-device configuration options.
* Fixed handling of PulseAudio and MMDevAPI devices that have identical descriptions.
* Fixed a potential lockup when stopping playback of suspended PulseAudio devices.
* Fixed logging of Unicode characters on Windows.
* Fixed 5.1 surround sound channels. By default it will now use the side channels for the surround output. A configuration using rear channels is still available.
* Fixed the QSA backend potentially altering the capture format.- Update project and download url- Dropped upstreamed fix-neon-build.patch- Refreshed openal-no-autospawn.diff
* Fri Oct 02 2015 dmuellerAATTsuse.com- replace openal-soft-arm_neon-only-for-32bit.patch with fix-neon-build.patch to fix the build instead of disabling neon
* Tue Sep 29 2015 dmuellerAATTsuse.com- add openal-soft-arm_neon-only-for-32bit.patch to fix build on aarch64
* Sun Sep 20 2015 meissnerAATTsuse.com- baselibs for -devel too for building wine.
* Tue Apr 21 2015 mpluskalAATTsuse.com- Use %cmake_install macro- Add dependency on pkg-config- Remove missingok from ghost file, it should not be needed
* Fri Mar 13 2015 lnusselAATTsuse.de- remove conflicts with openal. That package doesn\'t exist since 11.1 and actually only the library conflicts.- add back ldconfig calls for libopenal0- mark alsoft.conf as %config(noreplace,missingok) to silence rpmlint once the rpmlint bug is fixed.
* Sun Feb 15 2015 p.drouandAATTgmail.com- Update to version 1.16.0
* Implemented EFX Chorus, Flanger, Distortion, Equalizer, and Compressor effects.
* Implemented high-pass and band-pass EFX filters.
* Implemented the high-pass filter for the EAXReverb effect.
* Implemented SSE2 and SSE4.1 linear resamplers.
* Implemented Neon-enhanced non-HRTF mixers.
* Implemented a QSA backend, for QNX.
* Implemented the ALC_SOFT_pause_device, AL_SOFT_deferred_updates,
* AL_SOFT_block_alignment, AL_SOFT_MSADPCM, and AL_SOFT_source_length extensions.
* Fixed resetting mmdevapi backend devices.
* Fixed clamping when converting 32-bit float samples to integer.
* Fixed modulation range in the Modulator effect.
* Several fixes for the OpenSL playback backend.
* Fixed device specifier names that have Unicode characters on Windows.
* Added support for filenames and paths with Unicode (UTF-8) characters on Windows.
* Added support for alsoft.conf config files found in XDG Base Directory
* Specification locations (XDG_CONFIG_DIRS and XDG_CONFIG_HOME, or their defaults) on non-Windows systems.
* Added a GUI configuration utility (requires Qt 4.8).
* Added support for environment variable expansion in config options (not keys or section names).
* Added an example that uses SDL2 and ffmpeg.
* Modified examples to use SDL_sound.
* Modified CMake config option names for better sorting.
* HRTF data sets specified in the hrtf_tables config option may now be relative or absolute filenames.
* Made the default HRTF data set an external file, and added a data set for 48khz playback in addition to 44.1khz.
* Added support for C11 atomic methods.
* Improved support for some non-GNU build systems.- Add gcc-c++ requirement; new dependency- Use %cmake macro