Changelog for python-cupshelpers-1.4.5-2.1.1.noarch.rpm :
Fri Jul 11 14:00:00 2014 dimstarAATTopensuse.org
- Update to version 1.4.5:
+ Some codec fixes.
+ Traceback fixes.
+ IPv6 address entry fix.
+ Auth info saving improvement.
+ Some loop/hang bug fixes.
+ Use LockButton for fewer auth dialogs.
- Rebase system-config-printer-Gtk-introspect.patch.

Tue Mar 25 13:00:00 2014 fcrozatAATTsuse.com
- Update to version 1.4.4:
+ Some UI fixes.
+ D-Bus signature decorator fix.
+ Job authentication fixes.
+ Makefile fixes.
+ Model names are now sorted by normalized name.
- Add system-config-printer-no-applet-in-gnome.patch: do not start
printer applet in GNOME (rh#677676).

Tue Feb 4 13:00:00 2014 fcrozatAATTsuse.com
- Remove old python bindings dependencies which are replaced by
gobject-introspection typelib ones: python-gnomekeyring,
python-gtk, python-notify.
- Add python-cairo as dependency, was pulled before by python-gtk.

Sun Dec 1 13:00:00 2013 dimstarAATTopensuse.org
- Update to version 1.4.3:
+ Make GnomeKeyring integration work with GIR.
+ Fix module name when retrieving item from keyring.
+ Use correct key to determine if auth is required.
+ More debug output for the OpenPrinting database query module.
+ Assign the driver type \"pdf\" with higher priority than the
driver type \"exact-cmd\".
+ Bugs fixed: lp##653132, lp##1220066, rh##1009865, rh##1018191,
rh##1017561, rh#1004753, rh#1003219
+ Updated translations.

Thu Nov 28 13:00:00 2013 dimstarAATTopensuse.org
- Add system-config-printer-Gtk-introspect.patch: Require Gtk 3.0
typelibs. We know we can\'t use Gtk 2.0 (bnc#852450).
- Require system-config-printer from -applet instead of only
system-config-printer-common (bnc#852842).

Tue Aug 20 14:00:00 2013 dimstarAATTopensuse.org
- Update to version 1.4.2:
+ Bugs fixed: rh#998277, rh#994506, rh#989096, rh#989050,
rh#986939, rh#984284, rh#957733, rh#979119, rh#978970,
rh#975705, rh#975058, rh#974845, rh#973662, rh#971973,
rh#971404, rh#971548, rh#971459, rh#971417, rh#970646,
rh#969846, rh#968142, rh#965771, rh#962207, rh#964673,
rh#965678, rh#957444, rh#961882, rh#965678.

Fri May 10 14:00:00 2013 dimstarAATTopensuse.org
- Update to version 1.4.1:
+ Make man page and --help output consistent.
+ Bugs fixed: rh#957343, rh#957444, rh#951710, rh#915483,
rh#950162, rh#948240.

Mon Apr 15 14:00:00 2013 dimstarAATTopensuse.org
- Update to version 1.4.0:
+ Support for firewalld.
+ Use gi.repository throughout.
+ Removed old bits (gtk_label_autowrap and gtkspinner).
+ Some locking fixes.
- Drop system-config-printer-fix-name-of-udev-helper.patch: fixed
upstream.
- Rebase system-config-printer-no-openprinting.patch.
- Add gobject-introspection BuildRequires: needed to get automatic
typelib() requires.

Mon Feb 11 13:00:00 2013 cooloAATTsuse.com
- Add system-config-printer-fix-name-of-udev-helper.patch to fix
udev-configure-printer to be called at all.

Thu Nov 29 13:00:00 2012 dimstarAATTopensuse.org
- Add python-pycurl Requires to python-cusphelpers subpackage, as
pycurl is imported from cupshelpers/openprinting.py.

Mon Nov 5 13:00:00 2012 tittiatcokeAATTgmail.com
- Ensure that the udev related files are installed in the correct
path (/usr/lib/udev).

Tue Oct 9 14:00:00 2012 dimstarAATTopensuse.org
- Update to version 1.3.12:
+ Fixed udev rules so a systemd service is created for the device
+ Cleaned up systemd service description.
+ udev: Allow remove to take the same format address.
+ Catch-all for gnomekeyring exceptions (bgo#859760).
- Fix %post/%postun scripts to reference the new service name (and
do not handle demo.service; an obvious copy/paste error).

Tue Aug 14 14:00:00 2012 dimstarAATTopensuse.org
- Update to version 1.3.11:
+ Fixed most recent change in cupshelpers: The cupshelpers config
module was not being imported.

Thu Aug 2 14:00:00 2012 dimstarAATTopensuse.org
- Update to version 1.3.10:
+ Changed application name in desktop file
+ Use cups-config to determine serverbin directory
+ Improved sorting of device lists
+ Add \"--show-jobs\" command line option
+ Use hpcups instead of ps with HP LaserJet 12xx/13xx
+ Suppress misleading notifications (lp#855379)
+ PDF printer support
+ Various enhancements on udev-configure-printer.
- Replace libudev-devel and libusb-compat-devel BuildRequires with
pkgconfig(libusb-1.0), following upstreams change.
- Add pkgconfig(libudev) BuildRequires: it was pulled in implicit
before.

Fri Jul 20 14:00:00 2012 dimstarAATTopensuse.org
- Pass --with-systemdsystemunitdir=%{_unitdir} to configure to
have the systemd service files installed
- Add systemd BuildRequires in order to have the %{_unitdir} macro
defined
- Drop xz BuildRequires, as it now comes for free with the build
system.

Fri Mar 2 13:00:00 2012 dimstarAATTopensuse.org
- Update to version 1.3.9:
+ Improved output from check-device-ids script.
+ Don\'t warn about changed cupsGetPPD3 behaviour in CUPS 1.5.3.
+ Avoid temporary file leaks.
+ Handle file disappearances when caching PPDs (rh#786232).
+ Fixed several debugprints (rh#785581).
+ Updated translations.

Sun Feb 5 13:00:00 2012 dimstarAATTopensuse.org
- Update to version 1.3.8:
+ Use pycurl \'https\' support for openprinting (CVE-2011-4405)
+ Really fix SMB probing in PrinterFinder.
+ Require newer pycups; drop compatibility code.
+ Don\'t penalise pxlmono now that rh#661814 is fixed in
ghostscript-9.04
+ Several fixes related to cups authentication.
+ Various other code changes.
+ Bugs fixed: rh#743446, rh#751610, rh#755913, bgo#757520,
rh#772112, bnc#735322, lp#653132, lp#653132, lp#653132,
lp#844976, lp#874445, lp#653132.
+ Updated translations.
- Drop system-config-printer-subprocess-no-shell.patch: fixed
upstream.
- Rebase system-config-printer-no-openprinting.patch.

Tue Jan 3 13:00:00 2012 vuntzAATTopensuse.org
- Fix coding errors caught by Stephen Shaw in
system-config-printer-subprocess-no-shell.patch.

Thu Dec 8 13:00:00 2011 vuntzAATTopensuse.org
- Add system-config-printer-subprocess-no-shell.patch: avoid
escaping issues when running commands. Fix bnc#735322.

Tue Dec 6 13:00:00 2011 vuntzAATTopensuse.org
- Add system-config-printer-no-openprinting.patch: this disables
the feature where PPD drivers can be downloaded from
OpenPrinting.org. See discussion in bnc#733542. As a side-effect,
this fixes CVE-2011-4405.

Wed Oct 26 14:00:00 2011 badshah400AATTgmail.com
- Modified categories in .desktop file so that it is grouped with
\"System\" applications in the desktop menus (bnc#714333)

Thu Oct 6 14:00:00 2011 vuntzAATTopensuse.org
- Update to version 1.3.7:
+ Show private job attributes for \"my jobs\" (rh#742279).
+ Enable Test Page button when application/postscript is
supported.
+ Some preferreddrivers.xml fixes (lp#855412).
+ Handle errors saving troubleshoot.txt (lp#789602).
+ Removed some stale code.
+ Make connections list more easily accessible (lp#842092).
+ Improved handling of remote CUPS queues via DNS-SD, and IPP
devices.
+ Better display of CUPS servers from \"Find Network Printer\".
+ Fixed SMB method for printer finder.
+ Don\'t handle tooltips during mainloop recursion (rh#664044,
rh#739734).
+ Fixed bold print of tab labels on option conflicts.
+ Preserve installable options on driver change.
+ Update printer properties dialog correctly when PPD changed.
+ Fixed typo triggered by private job attributes (lp#827573).
+ Marked some translatable strings that weren\'t (rh#734313).

Tue Sep 6 14:00:00 2011 vuntzAATTopensuse.org
- Split the main subpackage in various smaller subpackages, to
enable more fine-grained dependencies (gnome-control-center only
needs the dbus service, and we don\'t want to force people to
install the whole system-config-printer in that case):
- Create common subpackage that contains files common to more
than one subpackage.
- Create applet subpackage that contains the notification icon
monitoring printing stuff when the user is logged in.
- Create dbus-service subpackage that contains the dbus service.
- Rename lang subpackage to common-lang, so that it gets
installed with the common subpackage.
- Make all those subpackages depend on the common subpackage, for
obvious reasons.
- Add other dependencies between those subpackages:
. Add applet subpackage Recommends to main subpackage: it makes
sense to have the applet if the main tool is installed.
. Add dbus-service subpackage Requires to applet subpackage:
the applet relies on the dbus service to manage jobs.
- Move dbus-1-python, python-cups, python-cupshelpers,
python-gnomekeyring, python-gobject, python-gtk, python-notify,
python-smbc Requires from main subpackage to common subpackage
since all those python modules can be used by the various
tools.
+ Remove unneeded dbus-1-x11 and desktop-file-utils Requires.
+ Add a system-config-printer-applet Recommends to
udev-configure-printer: the udev tools create a notification for
the user if the applet is installed.
+ Make python-cupshelpers noarch.
+ Move the com.redhat.PrinterDriversInstaller.conf dbus
configuration file to python-cupshelpers, where it really
belongs (since this is where the dbus server is implemented).
+ Drop support for openSUSE <= 11.1.

Thu Aug 25 14:00:00 2011 dimstarAATTopensuse.org
- Update to version 1.3.6:
+ Allow entering AATT,?,=,& characters in Device URI text field
(lp##826958).
+ IPPAuthConnection: avoid traceback (Ubuntu #828030).
+ Removed PackageKit client code in missingPackagesAndExecutables
(lp#726938).
+ Properties dialog: make OK button sensitive even when no
changes to save (lp#444280).
+ Updated translations.

Wed Aug 24 14:00:00 2011 badshah400AATTgmail.com
- Also provide icon of size 256x256 (bnc#713902)

Sat Jul 30 14:00:00 2011 vuntzAATTopensuse.org
- Update to version 1.3.5:
+ Expose more things via D-Bus: driver selection, missing
executables checking, and physical device grouping.
+ Bug fixes:
- Fixed cupsFilter search in missing executables check.
- Use PackageKit to resolve missing executable filenames to
packages, instead of having a static mapping in the source
code.
- Fixed DNSSD hostname resolution.
- Fixed firewall code to handle json errors when used with the
older system-config-firewall D-Bus service.
- Fixed LPD probing (rh#726383).
- Use \"hostname\" instead of \"IP address\" when asking for names
of browse servers (rh#726134).

Sun Jul 17 14:00:00 2011 dimstarAATTopensuse.org
- Update to version 1.3.4:
+ udev:
- Don\'t rely on retriggering printers; enumerate them from
systemd instead.
- Don\'t complain about missing/invalid device ID for devices
we\'ve already handled.
+ UI:
- Removed unused Printer Groups feature.
- Don\'t show \"No printers configured\" page if the printers are
filtered in any way.
- URL-quote URIs when using \"Find Network Printer\" (lp#808137).
- Downloadable drivers: don\'t display printers for which there
are no drivers (rh#668154).
- Kerberos support for the SMB \'Verify\' button (requires new
enough pycups).
- Removed IPP/HTTP device screen in favour of \"Enter URI\"
(rh#685091).
- Converted ComboBoxEntry widgets to Entry+EntryCompletion in
NewPrinterWindow.ui.
- Robustness in ppdsloader in the face of errors (lp#766818).
- Changed Make/Model/State labels into GtkEntry widgets so
contents are always fully selectable (rh#719217).
- Convert iters to paths before comparing (rh#717062,
lh#791690, trac#221).
- Set translation domain in D-Bus service (lp#783967).
- Ensure consistency in jobviewer if add_job fails (rh#693055,
rh#632551).
+ Driver preferences:
- Avoid PostScript for HP LaserJet 2100 Series (rh#710231).
- Raised priority for SpliX driver (lp#793741).
+ Other:
- Adjusted test code in asyncpk1.py so it doesn\'t look like a
tempfile vulnerability.
+ Updated translations.
- Add xz BuildRequires to be able to decompress the tar.xz source.

Sat Jul 2 14:00:00 2011 dimstarAATTopensuse.org
- Move %{_sysconfdir}/cupshelpers/preferreddrivers.xml to
python-cupshelpers subpackage as the file is from there.
- Own %{_sysconfdir}/cupshelpers to fix build.

Thu Jun 9 14:00:00 2011 vuntzAATTopensuse.org
- Remove python-gnome Requires as no modules from python-gnome are
used.
- Add missing python-gnomekeyring Requires.
- Change python-gobject2 Requires to python-gobject, following the
package renaming.

Fri Jun 3 14:00:00 2011 dimstarAATTopensuse.org
- Update to version 1.3.3:
+ Main application:
- Allow % character in SMB URI (lp#747400).
- More error handling (lp#744783).
- Avoid traceback if printer duplication fails (rh#694629).
- Fixed off-by-one error in monitor.
- Fixed printer renaming (lp#726954).
+ Printer Properties dialog:
- Added PrinterModified D-Bus signal to printer properties
interface.
- More robustness for printer properties dialog when printer
removed (lp#741987).
+ New Printer dialog:
- Fixed PPDs loader when using CUPS remotely or when DBus not
available (rh#693515).
- Handle failure to load PPDs more gracefully (lp#742409).
- Avoid traceback when cancelling New Printer dialog after
failure.
- Make sure everything is ready before handlers might be called
(rh#689336).
+ Job Viewer:
- Ensure consistency in jobviewer if add_job fails (rh#693055,
rh#632551).
- Be defensive against CUPS returning incorrect job IDs
(lp#721051).
+ Other bits:
- More uses of check-device-ids.py.
- udev-configure-printer: be more defensive when parsing CUPS
response (lp#760661).
+ Other bugs fixed: lp#733088, lp#748964, lp#759811, lp#777188.
+ Updated translations.

Wed May 18 14:00:00 2011 dimstarAATTopensuse.org
- Update to version 1.3.2:
+ Main application:
- rh#685098: Set connected state when connecting to server
fails
- Handle the situation where cupsd has died/restarted more
gracefully.
- Renamed ui/
*.ui -> ui/
*.glade again, fixing translations.
+ Printer Properties dialog:
- lp#729966: Just hide Printer Properties dialog on
delete-event
- Extra job options: print-quality, printer-resolution,
output-bin.
- Automatically show horizontal scrollbar in job options screen
- Ignore \"output-mode-default\" attribute as it is not settable.
- Handle IPP_TAG_RESOLUTION types (requires pycups-1.9.55).
- Don\'t traceback if option value cannot be handled.
- rh#679103: Fixed traceback in options.py
+ New Printer dialog:
- rh#685091: Handle URIs in Find Network Printer entry, and use
\'Enter URI\' instead of \'Other\'
- trac#213: Use \"Do It Later\" instead of \"Cancel\" for adjust
firewall dialog
- rh#680683: Fixed an instance where NewPrinterGUI might not
have self.printers set
- IPPHostname can contain colon (to specify port).
- Fixed automatic driver installation when changing the driver.
- Removed stale code left over from conversion to gobjects.
- Ensure all uses of ppdsloader supply the Device ID.
- Fixed some small typos in newprinter --help output.
- rh#680288: Prevent traceback after 2nd drivers search dialog
is cancelled
+ Driver handling:
- Activated and fixed testing mode for device ID/driver
association
- Match HP-Fax2/3/... PPDs, as well as Ubuntu/Debian hpijs-ppds
packages.
- preferreddrivers.xml: Identify hpcups and hpijs fax PPDs.
- Match native hpijs driver (drv:///hp/hpijs.drv/...) as hpijs.
- Handle Ubuntu locations of hpcups.drv and hpijs.drv.
- preferreddrivers.xml: match OpenPrinting gutenprint PPD names
as gutenprint.
- Removed DES field check altogether.
- xmldriverprefs.test: show order more clearly.
- Make xmldriverprefs.test() debugging optional.
- More debugging during PPD selection.
- Prefer foomatic PostScript drivers before PCL drivers (except
foomatic-recommended ones).
- Update to version 1.3.1:
+ Fixed traceback due to libsane-hpaio installation check.
+ Removed duplicate method definition.
+ Defer calls to populateList initiated by monitor.
+ firewall: fixed cache behaviour.
+ Fixed page sequence when adding a printer with an
exactly-matching driver.
- Update to version 1.3.0:
+ Only show maintenance buttons when capable (rh#658564).
+ Compare printer make/model names only by words and numbers
(like they sound).
+ XML-based driver preference rules.
+ Don\'t use status icon when notification server supports
persistence.
+ Fetch Device ID for existing device when changing PPD, allowing
a more complete choice of drivers.
+ Include generic drivers as candidates whenever CMD field is
available.
+ Show all ID-matched drivers when adding a new printer.
+ Speed-ups in cupshelpers.ppds.ppdMakeModelSplit.
+ PPDs: Use ppd-product values to add to make/model list.
+ Show number of processing / pending jobs (rh#606868).
+ PPDs are now cached, with support for If-Modified-Since.
+ Adjust the firewall for SMB browsing.
+ Start CUPS service if not already started (rh#577226).
- Rebase system-config-printer-icon-brp-friendly.patch.
- Drop system-config-printer-firewall-menu.patch: no longer needed.
This means we can remove the gnome-patch-translation
BuildRequires.

Sun Feb 13 13:00:00 2011 vuntzAATTopensuse.org
- Call relevant macros in %post/%postun:
+ %desktop_database_post/postun because the package ships at
least one desktop file.
+ %icon_theme_cache_post/postun because the package ships themed
icons.
- Pass %{?no_lang_C} to %find_lang so that english documentation
can be packaged with the program, and not in the lang subpackage.
- Change Requires of lang subpackage to Recommends, since the
english documentation is not there anymore.

Wed Oct 13 14:00:00 2010 vuntzAATTopensuse.org
- Update to version 1.2.5:
+ Do not accept some invalid characters in various entries.
+ Add examples of IPP URI to NewPrinterWindow (rh#575795).
+ Delete Bluetooth printer\'s queue when unpaired.
+ Create ~/.printer-groups.xml only when group is created.
+ Add CMD-field matching for PPDs (rh#630058).
+ Save name of PPD which matches best to the detected printer,
not only make/model.
+ Mark more strings as translatable.
+ Fix some crashes.
+ Small improvements and fixes.
+ Updated translations.

Tue Aug 24 14:00:00 2010 dimstarAATTopensuse.org
- Update to version 1.2.4:
+ udev helper: use CUPS defaults when connecting.
+ Blacklist certain printer state reasons (rh#520815).
+ Exclude dnssd backend from udev search.
+ Do not error out on missing firewall D-Bus service.
+ Prioritize HP\'s hpcups driver against HPIJS.
+ Improvements for setting up Bluetooth printers.
+ udev-configure-printer: Match usblp, libusb, HPLIP, and USB
device file URIs.
+ Fill the queue list when clicking \"Probe\" in LPD printer setup
screen.
+ Remove the \":9100\" from discovered \"socket://...\" URIs.
+ Integration of the dnssd CUPS backend and assosiation of DNS-SD
names and IPs.
+ When setting up a printer search for local drivers before
searching the internet.
+ Access OpenPrinting via the web query API with redirect
support.
+ Prioritize DNS-SD-based URIs against IP-based URIs.
+ On discovered network printers do not only cache make and model
but also the device ID.
+ Fix recognition of remote CUPS queues when setting up an IPP
queue.
+ Avoid connecting to cups twice in PPDsLoader.
+ Make udev-configure-printer work for Bluetooth.
+ rh#618357: Changed shebang in executables
+ Various other bug fixees.
+ Updated translations.
- Rebase system-config-printer-icon-brp-friendly.patch

Sat Aug 7 14:00:00 2010 vuntzAATTopensuse.org
- Clean up update to 1.2.3.
- Force installation of udev rules and helpers in /lib/udev instead
of /etc/udev, since the default is to put a binary in /etc/udev,
which is wrong.

Wed Jul 7 14:00:00 2010 dimstarAATTopensuse.org
- Update to version 1.2.3:
+ Add Bluetooth auto-config to udev-configure-printer.
+ Make sure automatically-created queues will work.
+ Don\'t add queues for Graphtec devices.
+ Use sysconfdir for udev rules.
+ UI improvements.
+ Bug fixes.
+ Updated translations
- Changes from version 1.2.2:
+ Resolve DNS-SD hostnames for physical device comparison.
+ Handle connection failures to cups better.
+ UI improvements.
+ Bug fixes.
+ Updated translations
- Changes from version 1.2.1:
+ Many improvements in check-device-ids.
+ Use cups-pk-helper method for canceling jobs.
+ Add 25%, 50% and 75% level markers in the inklevel widget.
+ Improve Firewall interaction (Fedora-specific).
+ Fix a few crashes.
+ Bug fixes.
+ Updated translations
- Add glib2-devel BuildRequires.
- Rebase system-config-printer-icon-brp-friendly.patch.

Thu Mar 18 13:00:00 2010 dimstarAATTopensuse.org
- Update to version 1.2.0:
+ The my-default-printer application has been removed.
+ Printer drivers are automatically installed when possible.
+ The basic/advanced server settings dialogs have been merged.
+ PPDs are now fetched asynchronously.
+ The job viewer has seen many improvements.
+ Updated translations.
- remove fixme regarding polkit-1: current configure would not
even know about it.
- Rebase system-config-printer-icon-brp-friendly.patch to apply
without fuzz.

Sat Feb 27 13:00:00 2010 dimstarAATTopensuse.org
- Update to version 1.1.93:
+ Display a warning when the wrong IEEE 1284 ID is detected
+ rh#566938: catch RuntimeError in statereason.py when
cupsGetPPD2 fails
+ Removed HP and Kyocera IEEE 1284 Device ID hacks
+ Increased new printer notification timeout to 20 minutes.
+ Added simple program to check IEEE 1284 Device IDs against PPDs
+ Update translations.

Sun Feb 21 13:00:00 2010 dimstarAATTopensuse.org
- Update to version 1.1.92:
+ system-config-printer:
- Use stock \'add\' icon for new-printer button (lp#394071)
- Use gtk.STOCK_ instead of gtk- throughout
- Avoid clearing selecting device settings when adding a
printer
- Update the PolicyKit code to use the correct signature for
DeviceGet
- ppsloader: avoid traceback
- Set timeout for InstallPrinterDrivers D-Bus call
+ Updated translations.

Wed Feb 10 13:00:00 2010 vuntzAATTopensuse.org
- Update to version 1.1.91:
+ system-config-printer:
- Make it obvious when a printer is disabled.
- Update \'Time submitted\' column when clicking Refresh in job
viewer.
- Fixed traceback when renaming a printer.
- Fixed async pycups fallback again.
- Fixed statereason localization for raw queues (rh#558156).
- Set model for LPD queue ComboEntry.
- Only add current device to list when all devices found
(rh#558524).
- When retrying authentication as another user, forbid
PolicyKit.
- Use tooltips in jobs treeview.
- Avoid non-zero page sizes in SpinButton adjustments.
- Only show jobs for selected printers in job viewer.
- Better error handling when renaming a printer (rh#561182).
- Troubleshooter checks local SELinux file contexts.
- Fixed drop-down list for connection dialog.
- Avoid crash filling makes list when no make detected
(rh#562520).
- Fixed automatic driver assignment via applet.
- Minor bugfixes and HIG fixes.
+ Updated translations.

Wed Jan 20 13:00:00 2010 vuntzAATTopensuse.org
- Update to version 1.1.90:
+ system-config-printer:
- Parse foomatic\'s special DRV Device ID field (rh#550108).
- Driver selection fixes (rh#550075).
- Remove my-default-printer application.
- Handle cancelJob\'s optional purge_job parameter in PolicyKit1
backend.
- Changed \'Clear job\' to \'Delete job\'.
- Make sure the printer we added still exists before selecting
it (rh#551436).
- Set notification timeouts appropriately (rh#550829).
- \"Copy\" action in context menu is now called \"Duplicate\".
- Make sure there are enough ink level values (rh#541882).
- Reinstated job completion notifications with better text.
- Remove job attributes viewer tabs for jobs that have been
purged.
- Use asyncconn for canceling/deleting jobs.
- Ability to retrieve job files which have been preserved.
- Set D-Bus timeout when calling asynchronously.
- Restore option values for serial device.
- Fixed window modality and transience.
- PrinterDriversInstaller implementation: this is a system bus
service to install drivers via PackageKit.
- Use asyncconn to fetch PPDs.
- Don\'t rely on cups-pk-helper being around (rh#556170).
- Make sure serial device widgets are always initialized
(rh#556488).
- Clean up temporary files when localizing statereason
(rh#552768).
- Removed support for installing HP\'s proprietary plug-in.
- Fix various tracebacks (rh#550442, rh#550437, rh#553141,
rh#554372, rh#554268, rh#555552).
- Avoid leaking resources.
- Code cleanups.
- Updated translations.
+ udev-configure-printer/udev-add-printer:
- avoid traceback when no CMD field present.
- try to install drivers first.
- Update system-config-printer-icon-brp-friendly.patch after
my-default-printer removal.
- Remove system-config-printer-hide-my-default-printer.patch:
my-default-printer was removed.

Wed Dec 23 13:00:00 2009 vuntzAATTopensuse.org
- Update to version 1.1.16:
+ system-config-printer:
- Don\'t fail if smbc module is not available.
- Don\'t overwrite BrowsePoll settings with basic settings
dialog (rh #543986).
- Fixed cupsd.conf parsing when lines begin with blanks
(rh#544003).
- Constraints handling fix.
- Clear device screen each time a new dialog is presented.
- Prefer Foomatic/hpijs to hpcups for the time being.
- Rearchitecture code for more asynchronous code, and use it to
fetch the device list in a safe way.
- Adapted to new pycups API for cupsSetPasswordCB2.
- Ignore com.apple.print.recoverable state reason.
- Fix various tracebacks.
+ Updated translations.

Wed Dec 16 13:00:00 2009 vuntzAATTopensuse.org
- Update to version 1.1.15:
+ system-config-printer:
- Fix a traceback.
- Don\'t update properties if apply failed (rh#542503).
- Changes from version 1.1.14:
+ system-config-printer:
- Avoid unnecessary \"publish printers\" dialog.
- Translate job-hold-until and retry-current-job values.
- Attempt to discover whether the firewall needs adjusting.
- Iconify jobs window into status icon.
- Handle hpcups driver for 5400 series in test suite.
- Added SMB support to \'Find Network Printer\'.
- Fixed device fetch when not using polkit-1.
- Cancel PrinterFinder when new-printer dialog closes.
- Added IPP and JetDirect support to \'Find Network Printer\'.
- Use the correct URI for probed CUPS queues.
- Better order for network printer probes.
- Use make-and-model to guess the PPD driver for a discovered
printer, if no device ID is available.
- Improve default name of printer, when the name already
exists.
- Auto-select raw queue correctly when changing PPD.
- Attempt to determine make and model of network printers
(rh#524321).
- Don\'t display properties dialog for first test page
(lp#444280).
- Fixed visibility tracking for jobs window.
- Strip \'zjs\', \'zxs\', \'pcl3\' from make-and-model (rh#531048).
- Added support for custom state reasons.
- Catch IPP errors when updating from notified events
(rh#530641).
- Fail nicely if new printer is deleted during test page prompt
(rh#533109).
- Suggest installing foomatic-db-ppds when appropriate.
- Install the foomatic package if foomatic-rip is missing.
- Retry when reconnection (due to authentication) fails
(rh#541741).
- Various small bug and UI fixes.
- Various code improvements.
- Fix various tracebacks.
+ udev-configure-printer/udev-add-printer:
- Build system fixes.

Sat Oct 10 14:00:00 2009 dimstarAATTopensuse.org
- Update to version 1.1.13:
+ system-config-printer:
- Use correct statereason level icon names.
- Handle icon load failure gracefully.
- Fix cleaning of TurboPrint PPD listings of CUPS 1.4.x.
- Avoid error dialog after cancelling operation via PolicyKit
dialog.
- Fetch devices in a separate thread to avoid blocking
(lp#516787).
- Add polkit-1 support, and make it conditional on \"configure
- -with-polkit-1\".
- Fixed traceback with older versions of GTK+.
- Fixed proxy authentication.
- Allow PPD/device changes for raw queues.
- Extended TimedOperation class to allow callbacks
- Fixed cupspk support for DevicesGet
- Allow parameters to cupshelpers.getDevices
- Allow for more than one spinner task
- Use callbacks when fetching devices
- Fixed spinner UI bug
- Fixed cancellation in TimedOperation class
- Fetch network devices as soon as local devices are received
- Make sure to cancel the fetchDevices callback when not needed
+ Updated translations.
- Rebase system-config-printer-firewall-menu.patch to apply with
fuzz=0.

Wed Aug 26 14:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.12:
+ system-config-printer:
- Don\'t get tripped up by \"-\" when checking for missing
executables.
- HP\'s Bluetooth printers return a model name with added \"_BT\"
in their device ID.
- Added support for localized marker names
- Fixed parenting of WaitWindow when adding printer.
- Don\'t attempt to use PolicyKit if we are root.
- Support for cups-pk-helper\'s DevicesGet method.
- Use modern gtk tooltip support.
- Fixed typo handling exceptions from
AdvancedServerSettingsDialog.
- Use set_default_size instead of setting width and height
properties.
- Fixed missing treeview update in properties dialog.
- Fixed identification of CUPS native gutenprint drivers.
- Prefer native CUPS drivers to foomatic drivers.
- Busy/ready cursor handling fixes.
- Use separate thread for verifying IPP queue.
- Set an appropriate status icon tooltip when configuring
printer.
- Fixed cupspk handling of disabling a printer.
- Show a \'paused\' emblem for disabled printers.
- Use preferred object path for AuthenticationAgent.
- Kill job creation times timer on the jobviewer is destroyed.
- Only update job creation times once per minute at rest.
- Job status icon and state reason in jobs treeview.
- Show rejecting printers as insensitive.
- Added experimental package tagging for PPD files.
- Removed notification when job has completed.
- Fixed applet traceback when printing test page.
- Don\'t allow Back/Forward to lose troubleshooting diagnostic
information.
- Code cleanups.
+ udev-configure-printer/udev-add-printer:
- Compare MFG and MDL case-insensitively.
+ Updated translations.

Sat Aug 8 14:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.11:
+ udev-configure-printer/udev-add-printer:
- don\'t add fax queue if already present
- don\'t fork if DEBUG environment variable set
- Enable/disable queues with paired device URIs
- use \'/\' as delimiter when examining device URI
- make sure we don\'t configure the same printer twice
- Don\'t set USB configuration in udev-configure-printer
- Serialize CUPS-Get-Devices requests
- Exit early in udev-configure-printer if device already mapped
to URIs
- don\'t require pycups 1.9.46 just yet
- Fixed name uniqueness checking
- Notify the correct printer name
- create fax queues using prefix of printer queue
- fixed duplicate devpath check
- fixed removal when cupsd not running
+ system-config-printer:
- Use case-insensitive matching when cleaning up the PPD nick
names to get the model names for the make/model/driver list
- Made extracting make and model from the NickName of
TurboPrint PPDs working again
- Made the field for freely typing in an URI actually work
- Better method of determining current device URI
- Printer icon should not show \'printing\' when job stopped
- Updates for hplip 3.9.6
- Let the checks for adding a device to a physicaldevice object
parse HPLIP URIs correctly to extract the host name/IP from
them
- jobviewer: notice jobs that have stopped due to backend
errors
- Fixed cupspk\'s implementation of adminGetServerSettings()
- A warning is given that renaming destroys print job history
- Small improvements for printer rename confirmation
- API improvement in cupshelpers: limit job fetches
- troubleshoot: treat http and https schemes as potential CUPS
servers
- Make properties dialog OK button insensitive when no changes
- Validate BrowsePoll entries
+ Code cleanups and plug leaks.
+ Updated translations.

Wed Aug 5 14:00:00 2009 vuntzAATTnovell.com
- Fix build on 11.1 and earlier: we don\'t want the udev helpers
there.

Thu Jul 23 14:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.10:
+ Support for HPLIP 3.9.6.
+ Fixed \'location\' field for printers added remotely.
+ Avoid traceback when adding new printer.
+ Parse nmblookup failures correctly.
+ Avoid non-fatal traceback when adding IPP printer.
+ Make sure we find https URIs from https backend.
+ Prevent traceback on IPP notification after properties dialog
cancelled.
+ Fixed incorrect authentication in the troubleshooter.
+ Arrows for adding and removing class members are sensitive only
if something is selected.
+ Small fix for class members arrows: always de-sensitise buttons
after use.
+ Another fix for selecting an added printer.
+ Spot stopped jobs with CUPS 1.4 as well.
+ Map gutenprint filenames to the package name.
+ Use gpk-install-package-name to install packages, not the PK
D-Bus API.
+ Always update the jobviewer status icon on job events.
+ Fixed UI oddities when changing PPD/device.
+ Avoid possible traceback when receiving printer-added-events.
+ Fixed initial radio button selection for SMB authentication.
+ Make sure to URL-encode usernames and passwords correctly.
+ Don\'t run Properties dialog on new printer.
+ Don\'t mention the job number in completed jobs notification.
+ Check exit codes for child processes.
+ Removed IPP browser.
+ Improved matching of printer model names.
+ Added PIXMA comment to test suite.
+ Efficiency fixes for PPDs Device ID matching.
+ Fixed --debug option for PPDs self-test function.
+ Efficiency and readability improvements in PPDs Device ID
matcher.
+ Avoid cups.setServer/setPort.
+ Fixed incorrect \"printer not shared on server\" message.
+ Drop libsexy support in favour of GTK+ 2.17\'s equivalent.
+ Avoid reloading all PPDs when calls to jockey fail.
+ Small speed-up (0.09s) for the case where jockey is not
present.
+ Don\'t reload all PPDs if the query has already finished.
+ 75% speed improvement in ppdMakeModelSplit().
+ New udev-based queue configuration system.
+ Improve window size.
+ Fixed hang on start-up when trying to resize the window.
+ Fixed tracebacks in cupshelpers.ppds test suite.
+ Fixed Device ID matching for HPLIP PPDs.
+ Updated translations.
- Add cups-devel, libudev-devel, libusb-compat-devel BuildRequires.
- Pass --with-udev-rules to configure.
- Package the udev helpers in udev-configure-printer. This package
Obsoletes cups-autoconfig, since the new udev helpers now do this
job.
- Split cupshelpers python module in python-cupshelpers package
since it\'s needed by udev-configure-printer.
- Drop system-config-printer-cups-autoconfig-notifications.patch:
we will now use the udev tool and we will receive notifications
without this patch.

Mon Jul 20 14:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.8 (this is not a complete list of changes
since upstream uses git, but some changes aren\'t listed in
ChangeLog):
+ Set relaxed PPD conformance
+ Fixed URI parsing when verifying IPP URIs
+ Set glade\'s textdomain in the jobviewer (lp#341765)
+ Made hp-plugin call also working with HPLIP 3.9.2
+ Adjusted border padding for New Printer window
+ Use ValueError in PhysicalDevice to indicate device is
different
+ Import debugprint in cupspk
+ Fixes on automatic printer model selection and suggestion of
queue name
+ Style and efficiency improvements
+ Fixed XmlHelper crash on invalid XML file (lp#370469)
+ Clean up temporary PPD files when we\'re finished with them
+ Reconnect to CUPS if the connection gets lost during the
installation of a driver from OpenPrinting
+ Scroll to new job if it was added just above the visible range
+ Use grey ink-drop when there is no marker-colors value
+ Fixed conversion from broken-down UTC time to simple UNIX time
for held jobs
+ Track printer state changes for the printer context menu
+ Removed some stale code in cupshelpers
+ Make sure the job context menu cannot get out of date
+ Select a newly-added printer
+ Make troubleshooter work again by disabling cupspk for it

Wed Apr 15 14:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.7 (this is not a complete list of changes
since upstream uses git, but some changes aren\'t listed in
ChangeLog):
+ Prevent some tracebacks
+ Various improvements for printer model identification
+ Added support for https device URIs showing the IPP screen
+ Efficiency fixes
+ Do not use setlocale() for locale-independent
uppercase/lowercase conversion
+ jobviewer: don\'t abort if we couldn\'t show a notification

Sat Mar 14 13:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.6 (this is not a complete list of changes
since upstream uses git, but some changes aren\'t listed in
ChangeLog):
+ Use setlocale() to save current LC_CTYPE value, not getlocale()
+ Don\'t try search for a model series if there are no digits in
the model name
+ Adapted D-Bus policy file to the new D-Bus defaults
+ Better PPD fallback searching.
+ Strip \" hpijs\" from PPD names.

Fri Mar 6 13:00:00 2009 vuntzAATTnovell.com
- Update to version 1.1.5 (this is not a complete list of changes
since upstream uses git, but some changes aren\'t listed in
ChangeLog):
+ UI improvements in the new printer dialog.
+ Include local printer attributes in diagnostic output.
- Drop system-config-printer-bnc456110-non-blocking-probe.patch:
fixed upstream.
- Drop system-config-printer-fix-add-printer-git051bc7f0.patch:
fixed upstream.