Changelog for openssh-helpers-6.6p1-4.1.x86_64.rpm :
Fri Jul 25 14:00:00 2014 pcernyAATTsuse.com
- ssh(1) - correct FIPS checks to prevent connection fails when
protocol version is not explicitly requested (bnc#876704)
- ssh-keygen(1) - do not create DSA and RSA1 keys in FIPS mode
when generating all server keys (bnc#886845)
- fix SUSE spelling (bnc#889014)

Fri Jul 4 14:00:00 2014 pcernyAATTsuse.com
- Prevent other possible crashes in audit code due to abnormal
execution paths (generalized previous fix for bnc#832628)

Fri Jun 13 14:00:00 2014 pcernyAATTsuse.com
- exit sshd normally when port is already in use (bnc#832628)
- fix forwarding with IPv6 addresses in DISPLAY (bnc#847710)
[-IPv6_X_forwarding.patch]
- check SSHFP DNS records even for server certificates
(bnc#870532, CVE-2014-2653)
[-check_sshfp_for_certs.patch]
- removing the key converter (which hasn\'t been built since
the update to 6.5p1) patch from sources
[-key-converter.patch]

Thu Apr 24 14:00:00 2014 pcernyAATTsuse.com
- curve25519 key exchange fix (-curve25519-6.6.1p1.patch)
- patch re-ordering (-audit3-key_auth_usage-fips.patch,
- audit4-kex_results-fips.patch)
- remove uneeded dependency on the OpenLDAP server (openldap2)
in the helpers subpackage

Fri Apr 11 14:00:00 2014 pcernyAATTsuse.com
- update to 6.6p1
Security:

* sshd(8): when using environment passing with a sshd_config(5)
AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could
be tricked into accepting any enviornment variable that
contains the characters before the wildcard character.
Features since 6.5p1:

* ssh(1), sshd(8): removal of the J-PAKE authentication code,
which was experimental, never enabled and has been
unmaintained for some time.

* ssh(1): skip \'exec\' clauses other clauses predicates failed
to match while processing Match blocks.

* ssh(1): if hostname canonicalisation is enabled and results
in the destination hostname being changed, then re-parse
ssh_config(5) files using the new destination hostname. This
gives \'Host\' and \'Match\' directives that use the expanded
hostname a chance to be applied.
Bugfixes:

* ssh(1): avoid spurious \"getsockname failed: Bad file
descriptor\" in ssh -W. bz#2200, debian#738692

* sshd(8): allow the shutdown(2) syscall in seccomp-bpf and
systrace sandbox modes, as it is reachable if the connection
is terminated during the pre-auth phase.

* ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1
bignum parsing. Minimum key length checks render this bug
unexploitable to compromise SSH 1 sessions.

* sshd_config(5): clarify behaviour of a keyword that appears
in multiple matching Match blocks. bz#2184

* ssh(1): avoid unnecessary hostname lookups when
canonicalisation is disabled. bz#2205

* sshd(8): avoid sandbox violation crashes in GSSAPI code by
caching the supported list of GSSAPI mechanism OIDs before
entering the sandbox. bz#2107

* ssh(1): fix possible crashes in SOCKS4 parsing caused by
assumption that the SOCKS username is nul-terminated.

* ssh(1): fix regression for UsePrivilegedPort=yes when
BindAddress is not specified.

* ssh(1), sshd(8): fix memory leak in ECDSA signature
verification.

* ssh(1): fix matching of \'Host\' directives in ssh_config(5)
files to be case-insensitive again (regression in 6.5).
- FIPS checks in sftp-server

Mon Mar 31 14:00:00 2014 pcernyAATTsuse.com
- FIPS checks during ssh client and daemon startup
(-fips-checks.patch)

Mon Mar 17 13:00:00 2014 pcernyAATTsuse.com
- re-enabling the GSSAPI Key Exchange patch

Fri Feb 28 13:00:00 2014 pcernyAATTsuse.com
- re-enabling FIPS-enablement patch
- enable X11 forwarding when IPv6 is present but disabled on server
(bnc#712683, FATE#315036)

Tue Feb 18 13:00:00 2014 pcernyAATTsuse.com
- re-enabling the seccomp sandbox
(allowing use of getuid the syscall)

Tue Feb 18 13:00:00 2014 pcernyAATTsuse.com
- disabling seccomp sandboxing which doesn\'t work properly on SLE

Wed Feb 12 13:00:00 2014 pcernyAATTsuse.com
- Update to 6.5p1
Features since 6.4p1:

* ssh(1), sshd(8): support for key exchange using ECDH in
Daniel Bernstein\'s Curve25519; default when both the client
and server support it.

* ssh(1), sshd(8): support for Ed25519 as a public key type fo
rboth server and client. Ed25519 is an EC signature offering
better security than ECDSA and DSA and good performance.

* Add a new private key format that uses a bcrypt KDF to better
protect keys at rest. Used unconditionally for Ed25519 keys,
on demand for other key types via the -o ssh-keygen(1)
option. Intended to become default in the near future.
Details documented in PROTOCOL.key.

* ssh(1), sshd(8): new transport cipher
\"chacha20-poly1305AATTopenssh.com\" combining Daniel Bernstein\'s
ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode. Details documented
PROTOCOL.chacha20poly1305.

* ssh(1), sshd(8): refuse RSA keys from old proprietary clients
and servers that use the obsolete RSA+MD5 signature scheme.
It will still be possible to connect with these
clients/servers but only DSA keys will be accepted, and
OpenSSH will refuse connection entirely in a future release.

* ssh(1), sshd(8): refuse old proprietary clients and servers
that use a weaker key exchange hash calculation.

* ssh(1): increase the size of the Diffie-Hellman groups
requested for each symmetric key size. New values from NIST
Special Publication 800-57 with the upper limit specified by
RFC4419.

* ssh(1), ssh-agent(1): support pkcs#11 tokens that only
provide X.509 certs instead of raw public keys (requested as
bz#1908).

* ssh(1): new ssh_config(5) \"Match\" keyword that allows
conditional configuration to be applied by matching on
hostname, user and result of arbitrary commands.

* ssh(1): support for client-side hostname canonicalisation
using a set of DNS suffixes and rules in ssh_config(5). This
allows unqualified names to be canonicalised to
fully-qualified domain names to eliminate ambiguity when
looking up keys in known_hosts or checking host certificate
names.

* sftp-server(8): ability to whitelist and/or blacklist sftp
protocol requests by name.

* sftp-server(8): sftp \"fsyncAATTopenssh.com\" to support calling
fsync(2) on an open file handle.

* sshd(8): ssh_config(5) PermitTTY to disallow TTY allocation,
mirroring the longstanding no-pty authorized_keys option.

* ssh(1): ssh_config ProxyUseFDPass option that supports the
use of ProxyCommands that establish a connection and then
pass a connected file descriptor back to ssh(1). This allows
the ProxyCommand to exit rather than staying around to
transfer data.
Bugfixes since 6.4p1:

* ssh(1), sshd(8): fix potential stack exhaustion caused by
nested certificates.

* ssh(1): bz#1211: make BindAddress work with
UsePrivilegedPort.

* sftp(1): bz#2137: fix the progress meter for resumed
transfer.

* ssh-add(1): bz#2187: do not request smartcard PIN when
removing keys from ssh-agent.

* sshd(8): bz#2139: fix re-exec fallback when original sshd
binary cannot be executed.

* ssh-keygen(1): make relative-specified certificate expiry
times relative to current time and not the validity start
time.

* sshd(8): bz#2161: fix AuthorizedKeysCommand inside a Match
block.

* sftp(1): bz#2129: symlinking a file would incorrectly
canonicalise the target path.

* ssh-agent(1): bz#2175: fix a use-after-free in the PKCS#11
agent helper executable.

* sshd(8): improve logging of sessions to include the user
name, remote host and port, the session type (shell, command,
etc.) and allocated TTY (if any).

* sshd(8): bz#1297: tell the client (via a debug message) when
their preferred listen address has been overridden by the
server\'s GatewayPorts setting.

* sshd(8): bz#2162: include report port in bad protocol banner
message.

* sftp(1): bz#2163: fix memory leak in error path in
do_readdir().

* sftp(1): bz#2171: don\'t leak file descriptor on error.

* sshd(8): include the local address and port in \"Connection
from ...\" message (only shown at loglevel>=verbose).
- systemd systems

* create sysconfig file on systemd systems as well, yet do not
require it at run-time (bnc#862600)

* symlink rcsshd to /usr/bin/service
- rename \"-forcepermissions\" patch to \"-sftp_force_permissions\"
- disable key converter - ssh-keygen is able to do the same

Tue Feb 11 13:00:00 2014 hareAATTsuse.de
- Do not fail if sysconfig file isn\'t installed (bnc#862600)

Wed Feb 5 13:00:00 2014 idonmezAATTsuse.com
- Add openssh-6.2p1-forcepermissions.patch to implement a force
permissions mode (fate#312774). The patch is based on
http://marc.info/?l=openssh-unix-dev&m=128896838930893

Fri Jan 24 13:00:00 2014 pcernyAATTsuse.com
- Update to 6.4p1
Features since 6.2p2:

* ssh-agent(1) support in sshd(8); allows encrypted hostkeys, or
hostkeys on smartcards.

* ssh(1)/sshd(8): allow optional time-based rekeying via a
second argument to the existing RekeyLimit option. RekeyLimit
is now supported in sshd_config as well as on the client.

* sshd(8): standardise logging of information during user
authentication.

* The presented key/cert and the remote username (if available)
is now logged in the authentication success/failure message on
the same log line as the local username, remote host/port and
protocol in use. Certificates contents and the key
fingerprint of the signing CA are logged too.

* ssh(1) ability to query what cryptographic algorithms are
supported in the binary.

* ssh(1): ProxyCommand=- for cases where stdin and stdout
already point to the proxy.

* ssh(1): allow IdentityFile=none

* ssh(1)/sshd(8): -E option to append debugging logs to a
specified file instead of stderr or syslog.

* sftp(1): support resuming partial downloads with the \"reget\"
command and on the sftp commandline or on the \"get\"
commandline with the \"-a\" (append) option.

* ssh(1): \"IgnoreUnknown\" configuration option to selectively
suppress errors arising from unknown configuration directives.

* sshd(8): support for submethods to be appended to required
authentication methods listed via AuthenticationMethods.
Bugfixes since 6.2p2:

* sshd(8): fix refusal to accept certificate if a key of a
different type to the CA key appeared in authorized_keys
before the CA key.

* ssh(1)/ssh-agent(1)/sshd(8): Use a monotonic time source for
timers so that things like keepalives and rekeying will work
properly over clock steps.

* sftp(1): update progressmeter when data is acknowledged, not
when it\'s sent. bz#2108

* ssh(1)/ssh-keygen(1): improve error messages when the current
user does not exist in /etc/passwd; bz#2125

* ssh(1): reset the order in which public keys are tried after
partial authentication success.

* ssh-agent(1): clean up socket files after SIGINT when in debug
mode; bz#2120

* ssh(1) and others: avoid confusing error messages in the case
of broken system resolver configurations; bz#2122

* ssh(1): set TCP nodelay for connections started with -N;
bz#2124

* ssh(1): correct manual for permission requirements on
~/.ssh/config; bz#2078

* ssh(1): fix ControlPersist timeout not triggering in cases
where TCP connections have hung. bz#1917

* ssh(1): properly deatch a ControlPersist master from its
controlling terminal.

* sftp(1): avoid crashes in libedit when it has been compiled
with multi- byte character support. bz#1990

* sshd(8): when running sshd -D, close stderr unless we have
explicitly requested logging to stderr. bz#1976,

* ssh(1): fix incomplete bzero; bz#2100

* sshd(8): log and error and exit if ChrootDirectory is
specified and running without root privileges.

* Many improvements to the regression test suite. In particular
log files are now saved from ssh and sshd after failures.

* Fix a number of memory leaks. bz#1967 bz#2096 and others

* sshd(8): fix public key authentication when a :style is
appended to the requested username.

* ssh(1): do not fatally exit when attempting to cleanup
multiplexing- created channels that are incompletely opened.
bz#2079

* sshd(8): fix a memory corruption problem triggered during
rekeying when an AES-GCM cipher is selected

* Fix unaligned accesses in umac.c for strict-alignment
architectures. bz#2101

* Fix broken incorrect commandline reporting errors. bz#1448

* Only include SHA256 and ECC-based key exchange methods if
libcrypto has the required support.

* Fix crash in SOCKS5 dynamic forwarding code on
strict-alignment architectures.
- FIPS and GSSKEX patched disabled for now

Fri Oct 4 14:00:00 2013 pcernyAATTsuse.com
- fix server crashes when using AES-GCM
- removed superfluous build dependency on X

Thu Sep 19 14:00:00 2013 pcernyAATTsuse.com
- spec file and patch cleanup

* key converter is now in the -key-converter.patch

* openssh-nodaemon-nopid.patch is -no_fork-no_pid_file.patch

* openssh-nocrazyabicheck.patch is
- disable-openssl-abi-check.patch

* removing obsolete -engines.diff patch
- patches from SLE11

* use auditing infrastructure extending upstream hooks
(-auditX-
*.patch) instead of the single old patch
(-audit.patch)

* FIPS enablement (currently disabled)
(-fingerprint_hash.patch, -fips.patch)

* GSSAPI key exchange
(bnc#784689, fate#313068, -gssapi_key_exchange.patch)

* SysV init script update - \'stop\' now terminates all sshd
processes and closes all connections, \'soft-stop\' only
terminates the listener process (keeps active sessions intact)
(fate#314243)

* helper application for retrieving users\' public keys from
an LDAP server (bnc#683733, fate#302144, -ldap.patch)
- subpackage openssh-akc-ldap

* several bugfixes:
- login invocation
(bnc#833605, -login_options.patch)
- disable locked accounts when using PAM
(bnc#708678, fate#312033, -pam-check-locks.patch)
- fix wtmp handling
(bnc#18024, -lastlog.patch)
- init script is moved into documentation for openSUSE 12.3+
(as it confused systemd)

Tue Sep 10 14:00:00 2013 crrodriguezAATTopensuse.org
- fix the logic in openssh-nodaemon-nopid.patch which is broken
and pid_file therefore still being created.

Sat Aug 3 14:00:00 2013 crrodriguezAATTopensuse.org
- Update to version 6.2p2

* ssh(1)/sshd(8): Added support for AES-GCM authenticated encryption

* ssh(1)/sshd(8): Added support for encrypt-then-mac (EtM) MAC modes

* ssh(1)/sshd(8): Added support for the UMAC-128 MAC

* sshd(8): Added support for multiple required authentication

* sshd(8)/ssh-keygen(1): Added support for Key Revocation Lists

* ssh(1): When SSH protocol 2 only is selected (the default), ssh(1)
now immediately sends its SSH protocol banner to the server without
waiting to receive the server\'s banner, saving time when connecting.

* dozens of other changes, see http://www.openssh.org/txt/release-6.2

Mon Jul 1 14:00:00 2013 cooloAATTsuse.com
- avoid the build cycle between curl, krb5, libssh2_org and openssh
by using krb5-mini-devel

Wed Jun 19 14:00:00 2013 speilickeAATTsuse.com
- Recommend xauth, X11-forwarding won\'t work if it is not installed

Sun Apr 14 14:00:00 2013 crrodriguezAATTopensuse.org
- sshd.service: Do not order after syslog.target, it is
not required or recommended and that target does not even exist
anymore.

Tue Jan 8 13:00:00 2013 dmuellerAATTsuse.com
- use ssh-keygen(1) default keylengths in generating the host key
instead of hardcoding it

Tue Nov 13 13:00:00 2012 meissnerAATTsuse.com
- Updated to 6.1p1, a bugfix release
Features:

* sshd(8): This release turns on pre-auth sandboxing sshd by default for
new installs, by setting UsePrivilegeSeparation=sandbox in sshd_config.

* ssh-keygen(1): Add options to specify starting line number and number of
lines to process when screening moduli candidates, allowing processing
of different parts of a candidate moduli file in parallel

* sshd(8): The Match directive now supports matching on the local (listen)
address and port upon which the incoming connection was received via
LocalAddress and LocalPort clauses.

* sshd(8): Extend sshd_config Match directive to allow setting AcceptEnv
and {Allow,Deny}{Users,Groups}

* Add support for RFC6594 SSHFP DNS records for ECDSA key types. bz#1978

* ssh-keygen(1): Allow conversion of RSA1 keys to public PEM and PKCS8

* sshd(8): Allow the sshd_config PermitOpen directive to accept \"none\" as
an argument to refuse all port-forwarding requests.

* sshd(8): Support \"none\" as an argument for AuthorizedPrincipalsFile

* ssh-keyscan(1): Look for ECDSA keys by default. bz#1971

* sshd(8): Add \"VersionAddendum\" to sshd_config to allow server operators
to append some arbitrary text to the server SSH protocol banner.
Bugfixes:

* ssh(1)/sshd(8): Don\'t spin in accept() in situations of file
descriptor exhaustion. Instead back off for a while.

* ssh(1)/sshd(8): Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs as
they were removed from the specification. bz#2023,

* sshd(8): Handle long comments in config files better. bz#2025

* ssh(1): Delay setting tty_flag so RequestTTY options are correctly
picked up. bz#1995

* sshd(8): Fix handling of /etc/nologin incorrectly being applied to root
on platforms that use login_cap.
Portable OpenSSH:

* sshd(8): Allow sshd pre-auth sandboxing to fall-back to the rlimit
sandbox from the Linux SECCOMP filter sandbox when the latter is
not available in the kernel.

* ssh(1): Fix NULL dereference when built with LDNS and using DNSSEC to
retrieve a CNAME SSHFP record.

* Fix cross-compilation problems related to pkg-config. bz#1996

Tue Nov 13 13:00:00 2012 kukukAATTsuse.de
- Fix groupadd arguments
- Add LSB tag to sshd init script

Fri Oct 26 14:00:00 2012 cooloAATTsuse.com
- explicit buildrequire groff, needed for man pages

Tue Oct 16 14:00:00 2012 cooloAATTsuse.com
- buildrequire systemd through pkgconfig to break cycle

Wed Aug 15 14:00:00 2012 crrodriguezAATTopensuse.org
- When not daemonizing, such is used with systemd, no not
create a PID file

Mon Jun 18 14:00:00 2012 cooloAATTsuse.com
- do not buildrequire xorg-x11, the askpass is an extra package
and should build from a different package

Tue May 29 14:00:00 2012 meissnerAATTsuse.com
- use correct download url and tarball format.

Tue May 29 14:00:00 2012 crrodriguezAATTopensuse.org
- Update to version 6.0, large list of changes, seen
http://www.openssh.org/txt/release-6.0 for detail.

Thu May 10 14:00:00 2012 crrodriguezAATTopensuse.org
- By default openSSH checks at
*runtime
* if the openssl
API version matches with the running library, that might
be good if you are compiling SSH yourself but it is a totally
insane way to check for binary/source compatibility in a distribution.

Mon Feb 20 13:00:00 2012 meissnerAATTsuse.com
- include X11 app default dir

Fri Dec 23 13:00:00 2011 brianAATTaljex.com
- Fix building for OS 11.0, 10.3, 10.2

* Don\'t require selinux on OS 11.0 or lower

Fri Dec 23 13:00:00 2011 brianAATTaljex.com
- Fix building for OS 11.2 and 11.1
- Cleanup remove remaining litteral /etc/init.d \'s

Wed Dec 21 13:00:00 2011 cooloAATTsuse.com
- add autoconf as buildrequire to avoid implicit dependency

Tue Nov 29 13:00:00 2011 crrodriguezAATTopensuse.org
- Add systemd startup units

Sat Oct 29 14:00:00 2011 pcernyAATTsuse.com
- finalising libexecdir change (bnc#726712)

Wed Oct 19 14:00:00 2011 pcernyAATTsuse.com
- Update to 5.9p1

* sandboxing privsep child through rlimit

Fri Sep 16 14:00:00 2011 jengelhAATTmedozas.de
- Avoid overriding libexecdir with %_lib (bnc#712025)
- Clean up the specfile by request of Minh Ngo, details entail:

* remove norootforbuild comments, redundant %clean section

* run spec-beautifier over it
- Add PIEFLAGS to compilation of askpass; fails otherwise

Mon Aug 29 14:00:00 2011 crrodriguezAATTopensuse.org
- Update to verison 5.8p2

* Fixed vuln in systems without dev/random, we arenot affected

* Fixes problems building with selinux enabled
- Fix build with as-needed and no-add-needed

Sat Aug 13 14:00:00 2011 crrodriguezAATTopensuse.org
- Enable libedit/autocompletion support in sftp

Tue May 10 14:00:00 2011 meissnerAATTnovell.com
- Change default keysizes of rsa and dsa from 1024 to 2048
to match ssh-keygen manpage recommendations.

Fri Feb 4 13:00:00 2011 lchiquittoAATTnovell.com
- Update to 5.8p1

* Fix vulnerability in legacy certificate signing introduced in
OpenSSH-5.6 and found by Mateusz Kocielski.

* Fix compilation failure when enableing SELinux support.

* Do not attempt to call SELinux functions when SELinux is
disabled.
- Remove patch that is now upstream:

* openssh-5.7p1-selinux.diff

Thu Feb 3 13:00:00 2011 pcernyAATTnovell.com
- specfile/patches cleanup

Mon Jan 24 13:00:00 2011 lchiquittoAATTnovell.com
- Update to 5.7p1

* Implement Elliptic Curve Cryptography modes for key exchange (ECDH)
and host/user keys (ECDSA) as specified by RFC5656.

* sftp(1)/sftp-server(8): add a protocol extension to support a hard
link operation.

* scp(1): Add a new -3 option to scp: Copies between two remote hosts
are transferred through the local host.

* ssh(1): automatically order the hostkeys requested by the client
based on which hostkeys are already recorded in known_hosts.

* ssh(1)/sshd(8): add a new IPQoS option to specify arbitrary
TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput.

* sftp(1): the sftp client is now significantly faster at performing
directory listings, using OpenBSD glob(3) extensions to preserve
the results of stat(3) operations performed in the course of its
execution rather than performing expensive round trips to fetch
them again afterwards.

* ssh(1): \"atomically\" create the listening mux socket by binding it on
a temporary name and then linking it into position after listen() has
succeeded.

* ssh(1)/sshd(8): add a KexAlgorithms knob to the client and server
configuration to allow selection of which key exchange methods are
used by ssh(1) and sshd(8) and their order of preference.

* sftp(1)/scp(1): factor out bandwidth limiting code from scp(1) into
a generic bandwidth limiter that can be attached using the atomicio
callback mechanism and use it to add a bandwidth limit option to
sftp(1).

* Support building against openssl-1.0.0a.

* Bug fixes.
- Remove patches that are now upstream:

* openssh-5.6p1-tmpdir.diff

* openssh-linux-new-oomkill.patch
- Add upstream patch to fix build with SELinux enabled.

Wed Jan 12 13:00:00 2011 sbrabecAATTsuse.cz
- Removed relics of no more implemented opensc support.

Thu Nov 18 13:00:00 2010 lnusselAATTsuse.de
- add pam_lastlog to show failed login attempts
- remove permissions handling, no special handling needed

Tue Nov 16 13:00:00 2010 cristian.rodriguezAATTopensuse.org
- Use upstream oom_adj is deprecated patch

Tue Nov 2 13:00:00 2010 cooloAATTnovell.com
- remove the code trying to patch X11 paths - which was broken
for a very long time and was useless anyway as the Makefiles
do this correctly themselves

Sun Oct 31 13:00:00 2010 jengelhAATTmedozas.de
- Use %_smp_mflags

Thu Oct 14 14:00:00 2010 crrodriguezAATTopensuse.org
- Fix warning \"oom_adj is deprecated use oom_score_adj instead\"

Mon Sep 13 14:00:00 2010 anickaAATTsuse.cz
- actualize README.SuSE (bnc#638893)

Tue Aug 24 14:00:00 2010 anickaAATTsuse.cz
- update to 5.6p1

* Added a ControlPersist option to ssh_config(5) that automatically
starts a background ssh(1) multiplex master when connecting.

* Hostbased authentication may now use certificate host keys.

* ssh-keygen(1) now supports signing certificate using a CA key that
has been stored in a PKCS#11 token.

* ssh(1) will now log the hostname and address that we connected to at
LogLevel=verbose after authentication is successful to mitigate
\"phishing\" attacks by servers with trusted keys that accept
authentication silently and automatically before presenting fake
password/passphrase prompts.

* Expand %h to the hostname in ssh_config Hostname options.

* Allow ssh-keygen(1) to import (-i) and export (-e) of PEM and PKCS#8
keys in addition to RFC4716 (SSH.COM) encodings via a new -m option

* sshd(8) will now queue debug messages for bad ownership or
permissions on the user\'s keyfiles encountered during authentication
and will send them after authentication has successfully completed.

* ssh(1) connection multiplexing now supports remote forwarding with
dynamic port allocation and can report the allocated port back to
the user

* sshd(8) now supports indirection in matching of principal names
listed in certificates.

* sshd(8) now has a new AuthorizedPrincipalsFile option to specify a
file containing a list of names that may be accepted in place of the
username when authorizing a certificate trusted via the
sshd_config(5) TrustedCAKeys option.

* Additional sshd_config(5) options are now valid inside Match blocks

* Revised the format of certificate keys.

* bugfixes
- removed -forward patch (SSH_MAX_FORWARDS_PER_DIRECTION not hard-coded
any more), removed memory leak fix (fixed in upstream)

Fri Aug 20 14:00:00 2010 anickaAATTsuse.cz
- hint user how to remove offending keys (bnc#625552)

Thu Jul 22 14:00:00 2010 anickaAATTsuse.cz
- update to 5.5p1

Tue Jul 20 14:00:00 2010 anickaAATTsuse.cz
- update to 5.5p1

* Allow ChrootDirectory to work in SELinux platforms.

* bugfixes

Wed Jun 30 14:00:00 2010 meissnerAATTsuse.de
- Disable visual hostkey support again, after discussion on
its usefulness.

Mon May 17 14:00:00 2010 cristian.rodriguezAATTopensuse.org
- Hardware crypto is supported and patched but never
enabled, need to use --with-ssl-engine explicitely

Fri May 14 14:00:00 2010 anickaAATTsuse.cz
- fixed memory leak in sftp (bnc#604274)

Fri Apr 23 14:00:00 2010 anickaAATTsuse.cz
- honour /etc/nologin (bnc#530885)

Thu Mar 25 13:00:00 2010 meissnerAATTsuse.de
- Enable VisualHostKey (ascii art of the hostkey fingerprint) and
HashHostKeys (hardening measure to make them unusable for worms/malicious
users for further host hopping).

Tue Mar 23 13:00:00 2010 anickaAATTsuse.cz
- update to 5.4p1

* After a transition period of about 10 years, this release disables
SSH protocol 1 by default. Clients and servers that need to use the
legacy protocol must explicitly enable it in ssh_config / sshd_config
or on the command-line.

* Remove the libsectok/OpenSC-based smartcard code and add support for
PKCS#11 tokens. This support is automatically enabled on all
platforms that support dlopen(3) and was inspired by patches written
by Alon Bar-Lev. Details in the ssh(1) and ssh-add(1) manpages.

* Add support for certificate authentication of users and hosts using a
new, minimal OpenSSH certificate format (not X.509). Certificates
contain a public key, identity information and some validity
constraints and are signed with a standard SSH public key using
ssh-keygen(1). CA keys may be marked as trusted in authorized_keys
or via a TrustedUserCAKeys option in sshd_config(5) (for user
authentication), or in known_hosts (for host authentication).
Documentation for certificate support may be found in ssh-keygen(1),
sshd(8) and ssh(1) and a description of the protocol extensions in
PROTOCOL.certkeys.

* Added a \'netcat mode\' to ssh(1): \"ssh -W host:port ...\" This connects
stdio on the client to a single port forward on the server. This
allows, for example, using ssh as a ProxyCommand to route connections
via intermediate servers. bz#1618

* Add the ability to revoke keys in sshd(8) and ssh(1). User keys may
be revoked using a new sshd_config(5) option \"RevokedKeys\". Host keys
are revoked through known_hosts (details in the sshd(8) man page).
Revoked keys cannot be used for user or host authentication and will
trigger a warning if used.

* Rewrite the ssh(1) multiplexing support to support non-blocking
operation of the mux master, improve the resilience of the master to
malformed messages sent to it by the slave and add support for
requesting port- forwardings via the multiplex protocol. The new
stdio-to-local forward mode (\"ssh -W host:port ...\") is also
supported. The revised multiplexing protocol is documented in the
file PROTOCOL.mux in the source distribution.

* Add a \'read-only\' mode to sftp-server(8) that disables open in write
mode and all other fs-modifying protocol methods. bz#430

* Allow setting an explicit umask on the sftp-server(8) commandline to
override whatever default the user has. bz#1229

* Many improvements to the sftp(1) client, many of which were
implemented by Carlos Silva through the Google Summer of Code
program:
- Support the \"-h\" (human-readable units) flag for ls
- Implement tab-completion of commands, local and remote filenames
- Support most of scp(1)\'s commandline arguments in sftp(1), as a
first step towards making sftp(1) a drop-in replacement for scp(1).
Note that the rarely-used \"-P sftp_server_path\" option has been
moved to \"-D sftp_server_path\" to make way for \"-P port\" to match
scp(1).
- Add recursive transfer support for get/put and on the commandline

* New RSA keys will be generated with a public exponent of RSA_F4 ==
(2
*
*16)+1 == 65537 instead of the previous value 35.

* Passphrase-protected SSH protocol 2 private keys are now protected
with AES-128 instead of 3DES. This applied to newly-generated keys
as well as keys that are reencrypted (e.g. by changing their
passphrase).
- cleanup in patches

Tue Mar 2 13:00:00 2010 cooloAATTnovell.com
- do not use paths at all, but prereq packages

Sat Feb 27 13:00:00 2010 ajAATTsuse.de
- Use complete path for groupadd and useradd in pre section.

Tue Feb 23 13:00:00 2010 anickaAATTsuse.cz
- audit patch: add fix for bnc#545271

Mon Feb 22 13:00:00 2010 anickaAATTsuse.cz
- do not fix uid/gid anymore (bnc#536564)

Tue Dec 15 13:00:00 2009 jengelhAATTmedozas.de
- select large PIE for SPARC, it is required to avoid
\"relocation truncated to fit: R_SPARC_GOT13 against symbol xyz
defined in COMMON section in sshd.o\"

Mon Sep 21 14:00:00 2009 anickaAATTsuse.cz
- add new version of homechroot patch (added documentation, added
check for nodev and nosuid)
- remove Provides and Obsoletes ssh

Thu Aug 20 14:00:00 2009 anickaAATTsuse.cz
- make sftp in chroot users life easier (ie. bnc#518238),
many thanks jchadimaAATTredhat.com for a patch

Sun Jul 12 14:00:00 2009 cooloAATTnovell.com
- readd $SSHD_BIN so that sshd starts at all

Tue Jul 7 14:00:00 2009 llunakAATTnovell.com
- Added a hook for ksshaskpass

Sun Jul 5 14:00:00 2009 dmuellerAATTnovell.com
- readd -f to startproc and remove -p instead to
ensure that sshd is started even though old instances
are still running (e.e. being logged in from remote)

Fri Jun 19 14:00:00 2009 cooloAATTnovell.com
- disable as-needed for this package as it fails to build with it

Tue May 26 14:00:00 2009 anickaAATTsuse.cz
- disable -f in startproc to calm the warning (bnc#506831)

Thu Apr 23 14:00:00 2009 lnusselAATTsuse.de
- do not enable sshd by default