Changelog for pcsc-ccid-1.4.14-1.1.x86_64.rpm :

* Tue Nov 26 2013 wrAATTrosenauer.org- Updated to version 1.4.14
* Add support of Gemalto GemCore SIM Pro firmware 2.0 (using USB)
* report FEATURE_IFD_PIN_PROPERTIES only for pinpad readers
* Generalize the management of (old) readers with bDeviceClass = 0xFF
* some minor bugs removed
* Thu Oct 10 2013 wrAATTrosenauer.org- Updated to version 1.4.13
* Add support of Access IS ePassport Reader Planeta RC700-NFC CCID
* Add support of Windows value for CM_IOCTL_GET_FEATURE_REQUEST Windows uses 0x313520 for SCARD_CTL_CODE(3400) pcsc-lite uses 0x42000D48 for SCARD_CTL_CODE(3400) RDP aplications (like rdesktop) will convert SCardControl() commands from a Windows application (so using 0x313520) to pcsc-lite.
* fix multi-slot support for card movement notification
* some minor bugs removed
* Tue Aug 13 2013 wrAATTrosenauer.org- Updated to version 1.4.12
* Add support of HID OMNIKEY 5127 CK HID OMNIKEY 5326 DFR HID OMNIKEY 5427 CK Ingenico WITEO USB Smart Card Reader (Base and Badge) SecuTech SecuTech Token
* Add support of card movement notifications for multi-slot readers
* Check libusb is at least at version 1.0.8
* Get the serialconfdir value from pcsc-lite pkg config instead of using $(DESTDIR)/$(sysconfdir)/reader.conf.d/ if not specified (pcsc-lite does not provide that information yet so the value is set manually
* some minor bugs removed
* Wed Jun 12 2013 wrAATTrosenauer.org- Updated to version 1.4.11
* Add support of Gemalto IDBridge CT30 Gemalto IDBridge K30 SCM Microsystems Inc. SCL010 Contactless Reader SCM Microsystems Inc. SDI011 Contactless Reader THRC reader
* Better management of time extension requests
* parse: better support of devices with bInterfaceClass = 0xFF
* udev rule file: Remove setting group to pcscd, remove support of Linux kernel < 2.6.35 for auto power up management
* some minor bugs removed
* Sun Apr 21 2013 wrAATTrosenauer.org- Updated to version 1.4.10
* Add support of ACS APG8201 USB Reader with PID 0x8202 GIS Ltd SmartMouse USB Gemalto IDBridge K3000 Identive CLOUD 2700 F Smart Card Reader Identive CLOUD 2700 R Smart Card Reader Identive CLOUD 4500 F Dual Interface Reader Identive CLOUD 4510 F Contactless + SAM Reader Identive CLOUD 4700 F Dual Interface Reader Identive CLOUD 4710 F Contactless + SAM Reader Inside Secure AT90SCR050 Inside Secure AT90SCR100 Inside Secure AT90SCR200 SCR3310-NTTCom USB SmartCard Reader SafeTech SafeTouch SpringCard H512 Series SpringCard H663 Series SpringCard NFC\'Roll Yubico Yubikey NEO CCID Yubico Yubikey NEO OTP+CCID
* Add support of time extension for Escape commands
* Wed Jan 16 2013 wrAATTrosenauer.org- Updated to version 1.4.9
* Add support of Aktiv Rutoken PINPad In Aktiv Rutoken PINPad Ex REINER SCT cyberJack go
* Info.plist: Correctly handle reader names containing &
* Wed Jan 09 2013 sbrabecAATTsuse.cz- Verify GPG signature.
* Thu Oct 18 2012 fcrozatAATTsuse.com- Fix build with new udev rules directory location.
* Mon Oct 08 2012 wrAATTrosenauer.org- Updated to version 1.4.8:
* Add support of SCR3310-NTTCom USB (was removed in version 1.4.6) Inside Secure VaultIC 420 Smart Object Inside Secure VaultIC 440 Smart Object
* Wait up to 3 seconds for reader start up
* Add support of new PC/SC V2 part 10 properties: dwMaxAPDUDataSize wIdVendor wIdProduct
* Use helper functions from libPCSCv2part10 to parse the PC/SC v2 part 10 features
* Tue Jun 26 2012 wrAATTrosenauer.org- Updated to version 1.4.7:
* Add support of ACS ACR101 ICC Reader ACS CryptoMate64 Alcor Micro AU9522 Bit4id CKey4 Bit4id cryptokey Bit4id iAM Bit4id miniLector Bit4id miniLector-s CCB eSafeLD Gemalto Ezio Shield Branch KOBIL Systems IDToken NXP PR533
* KOBIL Systems IDToken special cases: Give more time (3 seconds instead of 2) to the reader to answer Hack for the Kobil IDToken and Geman eID card. The German eID card is bogus and need to be powered off before a power on Add Reader-Info-Commands special APDU/command - Manufacturer command - Product name command - Firmware version command - Driver version command
* Use auto suspend for CCID devices only (Closes Alioth bug [#313445] \"Do not activate USB suspend for composite devices: keyboard\")
* Fix some error management in the T=1 TPDU state machine
* some minor bugs removed
* some minor improvements added- do not call bootstrap since autoconf requirement is bleeding edge and only works on Factory/12.2 - also seems to be unnecessary
* Sun Apr 15 2012 wrAATTrosenauer.org- Updated to version 1.4.6:
* Add support of Avtor SC Reader 371, Avtor SecureToken, DIGIPASS KEY 202, Fujitsu SmartCase KB SCR eSIG, Giesecke & Devrient StarSign CUT, Inside Secure VaultIC 460 Smart Object, Macally NFC CCID eNetPad reader, OmniKey 6321 USB, SCM SDI 011, Teridian TSC12xxF, Vasco DIGIPASS KEY 101
* Remove support of readers without a USB CCID descriptor file 0x08E6:0x34C1:Gemalto Ezio Shield Secure Channel 0x08E6:0x34C4:Gemalto Ezio Generic 0x04E6:0x511A:SCM SCR 3310 NTTCom 0x0783:0x0008:C3PO LTC32 USBv2 with keyboard support 0x0783:0x9002:C3PO TLTC2USB 0x047B:0x020B:Silitek SK-3105
* Disable SPE for HP USB CCID Smartcard Keyboard. The reader is bogus and unsafe.
* Fix a problem with ICCD type A devices. We now wait for device ready
* Secure PIN Verify and PIN Modify: set the minimum timeout to 90 seconds
* Add support of wIdVendor and wIdProduct properties
* Add support of dwMaxAPDUDataSize
* Add support of Gemalto firmware features
* some minor bugs removed
* Fri Dec 02 2011 cooloAATTsuse.com- add automake as buildrequire to avoid implicit dependency
* Mon Oct 17 2011 wrAATTrosenauer.org- Updated to version 1.4.5:
* Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID), BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with fingerprint), SDS DOMINO-Key TWIN Pro
* Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
* SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not the vendor name and version of the driver but of the IFD: InterFace Device i.e. the smart card reader. We then return the USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
* reduce binary size by removing unused features from simclist
* Fix some warnings reported by Coverity
* Wed May 18 2011 wrAATTrosenauer.org- Updated to version 1.4.4:
* Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio Generic
* Activate USB automatic power suspend. The Linux kernel should power off the reader automatically if it is not used (pcscd is not running).
* Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines
* Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011, Feitian ePass2003 readers
* use :libudev: instead of :libhal: naming scheme
* Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch and the associated documentation.
* the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so disable it
* Add support of Feitian SCR310 reader (also known as 301v2), ACS APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200, Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
* Add back support of \"bogus\" Oz776, REINER SCT and BLUDRIVE II
* disable use of interrupt card events for multi slots readers
* Wed Feb 16 2011 oneukumAATTsuse.de- Added support for internal reader in HP laptops
* Wed Jan 05 2011 sbrabecAATTsuse.cz- Updated to version 1.4.1:
* Security fix (bnc#661000, CVE-2010-4530).
* Migrated to libusb-1_0.
* udev support.
* Compatible with pcsc-lite-1.6.
* See ChangeLog for details.
* Wed Aug 05 2009 sbrabecAATTsuse.cz- Updated to version 1.3.11:
* Incompatible change: Remove support of Reiner-SCT cyberJack pinpad(a) on request of Reiner-SCT. Use pcsc-cyberjack instead.
* Should work: Panasonic USB Smart Card Reader 7A-Smart, ATMEL AT91SC192192CT-USB, Alcor Micro SCR001, Aktiv Rutoken ECP, Synnix STD200, more Neowave Weneo tokens, Feitian SCR301 Raritan D2CIM-DVUSB VM/CCID
* New known firmware: Kobil EMV CAP, ACS ACR122U-WB-R with bogus firmware < 2.06
* Broadcom 5880 should work a bit better
* Fixes for GemProx DU/SU and hacks for other Gemalto readers
* SCM SCL010 Contactless Reader is not supported
* Add support of FEATURE_MCT_READERDIRECT. Now only on the Kobil TriBAATTnk reader.
* Support --disable-class argument to build a NON class driver.
* HAL support fixes.
* Add support of PIN_PROPERTIES_STRUCTURE structure and FEATURE_IFD_PIN_PROPERTIES
* It is possible to configure composite devices to be seen as multi-slots.
* Other fixes, improvement and updates.
* Tue Apr 07 2009 sbrabecAATTsuse.cz- Updated to version 1.3.10:
* Added a hack to support the bogus OpenGPG card.
* Should work: Precise Biometrics 200 MC, Precise Biometrics 250 MC, SafeNet IKey4000 used in different device, Atmel AT98SC032CT, Neowave Weneo, MSI StarReader SMART, VMware Virtual USB CCID reader, ACS ACR122U PICC Interface, HP MFP Smart Card Reader, KONA USB SmartCard, SpringCard CrazyWriter, CSB6 Basic, CSB6 Secure, CSB6 Ultimate, EasyFinger Standard, EasyFinger Ultimate and Prox\'N\'Roll, Atmel AT91SO, Cherry SmartTerminal ST-1200USB, Aladdin eToken PRO USB 72K Java.
* Differentiate between KOBIL mIDentity M and XL.
* Known readers: SpringCard Prox\'N\'Roll, CSB6 Basic, EasyFinger Ultimate, CSB6 Ultimate, EasyFinger Standard, CrazyWriter, CSB6 Secure, Pro-Active CSB6 Ultimate is renamed SpringCard CSB6 Ultimate
* Unsupported: Broadcom 5880, jNet Technology jToken s1.
* Disabled support of the contcatless part of SDI010 and SCR331DI.
* Avoid a \"Duplicate frame detected\" error.
* Use a very long timeout for PowerUp since the card can be very slow to send the full ATR (up to 30 seconds at 4 MHz)
* Driver will work in a multi-reader configuration.- Use modalias supplements instead of eID issuer locales.- Require pcsc-lite.- Removed custom hotplug support. Now integrated in pcsc-lite.