Changelog for w_scan-20141122-6.17.x86_64.rpm :

* Wed Nov 05 2014 joerg.lorenzenAATTki.tng.de- Update to version 20140727 - for changes against 20140118, see
* 2014-07-12 (dev)
* 2014-06-28 (dev)
* 2014-05-29 (dev)
* 2014-04-23 (dev)- Version 20140712 - alloc_transponder(): check for polarization on sat. - update S19E2, based on emulated scan with logfiles from easy-vdr.de developers. - move freq calculations from Hz to MHz to separate func - if tuning fails on on any tp; instead of simply retrying with same settings -> redo with as much as possible params to AUTO. On some wrong NIT tables, params are just wrong, this
*may
* help in some cases. - start reworking VLC xspf playlist:
* validate using http://validator.xspf.org/ (NOTE: VLC-2.1.4 saved DVB xspf doesnt conform to XSPF)
* compare to VLC-2.1.4
* test VLC DVBT on Win64 using BDA- Version 20140628 - new contact email address - fix compile warnings reported by A.Palosaari in parse-dvbscan.c - improve DVB-T/T2 scans for Finland, thanks to A.Palosaari, now doing separate DVB-T2 loop for terr scans. - add generic w_scan XML output format, to be used for data exchange with w_scan. - frequency_list_descriptor: dont ignore coding_type - simplify struct transponder - add long commandline arguments (short ones are still working.) - new double linked lists (foreseen to be sortable later.) - new: logical_channel_descriptor - add dvb device emulation for debugging based on logfiles (developer use only.) - new signal detection- Version 20140529 - fix scr freq rounding- Version 20140423 - add JESS/EN50607 && refactor EN50494 - add Australia single LO LNB. Thanks to Martin Lang. - modify initial tuning data output to put plp_id as last item - remove kaffeine output as its no longer possible to support it - add fflush command for stderr && stdout- Version 20140118 - improve scr
* rewrite setup_scr()
* take VCO offset caused by 4MHz step size into account.
* check return value in set_frontend()
* reduce delay after setting 18V LNB voltage to 5msec
* reduce diseqc repeat to 100ms
* remove a few comments and debug stuff
* still experimental, waiting for tests - if you own such devices, pls send me logs: \'w_scan -fs -s SXXX (..) -u:: 2>&1 | tee log.txt\' - VLC xspf
* remove unused stuff && started to adopt to current vlc; but no doc avail for this VLC file format. :( - Sat scan: add missing check of setup_switch() return value.- Version 20140102 - add experimental(!) support for scr. i dont have spec && need testers for EN50494 for proper support.- Version 20131031 - update 19,2E, 23,5E, 28,2E. Thanks to John Horck.
* Fri Apr 05 2013 joerg.lorenzenAATTki.tng.de- Update to version 20130331 - adapt to vdr next version number, skipping support for vdr < 1.7.4 - fix compiling for newer frontend.h - apply small other patches since 2012-11-11
* Tue Dec 11 2012 joerg.lorenzenAATTki.tng.de- Update to version 20121111 - apply patch from Michael Stilmant, who discovered two string buffers being too small by one byte.
* Sun Jul 15 2012 joerg.lorenzenAATTki.tng.de- Update to version 20120605 - since some dvb drivers are buggy and dont tune DVB-S with ROLLOFF_AUTO, therefore now explictly set ROLLOFF_35 in case of DVB-S. Thanks to R.Warsow for report && testing. NOTE: this is just a work-around for broken DVB-S drivers, since DVB-S means by DVB standard
*always
* RO = 0.35 - print transponder data from satellite list during scan to make debug reports easier to read
* Tue Jun 05 2012 joerg.lorenzenAATTki.tng.de- Update to version 20120525 - update all supported satellites - add the following satellites:
* 180.0 east Intelsat 18
* 172.0 east GE 23
* 169.0 east Intelsat 5
* 162.0 east Superbird B2
* 154.0 east JCSAT 2A
* 144.0 east Superbird C2
* 134.0 east Telstar 18
* 134.0 east Apstar 6
* 132.0 east Vinasat 1 / JCSAT 5A
* 128.0 east JCSAT 3A
* 125.0 east ChinaSat 6A
* 124.0 east JCSAT 4A
* 122.2 east AsiaSat 4
* 118.0 east Telkom 2
* 116.0 east Koreasat 6 / ABS 7
* 115.5 east ChinaSat 6B
* 113.0 east Koreasat 5 / Palapa D
* 110.5 east ChinaSat 10
* 110.0 east NSat 110 / BSat 2C/3A / JCSat 110R
* 103.0 east Express A2
* 86.5 east KazSat 2
* 85.0 east Horisons 2 / Intelsat 15
* 30.5 east Arabsat 5A
* 20.0 east Arabsat 5C
* 3.0 east Eutelsat 3A/3C, Rascom 1R
* 31.5 west Intelsat 25
* 34.5 west Intelsat 903
* 37.5 west NSS 10 / Telstar 11N
* 40.5 west NSS 806
* 43.0 west Intelsat 11
* 45.0 west Intelsat 14
* 50.0 west Intelsat 1R
* 53.0 west Intelsat 707
* 55.5 west Intelsat 805
* 58.0 west Intelsat 9/16
* 63.0 west Telstar 14R
* 65.0 west Star One C1
* 70.0 west Star One C2
* 72.0 west AMC 6
* 78.0 west SIMON BOLIVAR
* 83.0 west AMC 9
* 84.0 west Brasilsat B4
* 85.0 west AMC 16
* 87.0 west SES 2
* 89.0 west Galaxy 28
* 95.0 west Nimiq 1
* 93.1 west Galaxy 25
* 95.0 west Galaxy 3C
* 99.2 west Galaxy 16 / Spaceway 2
* 101.0 west SES 1
* 103.0 west AMC 1
* 105.0 west AMC 15/18
* 107.3 west Anik F1/F1R
* 111.1 west Anik F2
* 113.0 west SatMex 6
* 116.8 west SatMex 5
* 119.0 west Anik F3
* 121.0 west Echostar 9 / Galaxy 23
* 123.0 west Galaxy 18
* 125.0 west Galaxy 14 / AMC 21
* 127.0 west Galaxy 13 / Horizons 1
* 131.0 west AMC 11
* 133.0 west Galaxy 15
* 135.0 west AMC 10
* 135.0 west AMC 7
* 135.0 west AMC 8
* 177.0 west NSS 9 - VLC xspf output: as VLC-2.x.x no longer supports comma (VLC-1.x.x did) but only colon as separator, update xspf output format accordingly. Thanks to Jacek Sliwerski for report && samples. - increase max number of supported dvb adapters, based on a patch send by Julian Scheel.
* auto scan: /dev/dvb/adapter(0..15)
* by option -a : /dev/dvb/adapter(0..31) - blacklist ( = look for a better device on auto scan ) Pinnacle PCTV 290e for cable:
* known to have weakness on cable because of integrated preamp
* it\'s driver doesnt report symbolrates correctly.
* for terrestrial scan it\'s still a preferred device - no longer distribute a precompiled version of w_scan inside package.- Version 20120415 - add a missing \'break\' for initial tuning data on satellite, reported by L. Dolezel - rework audio language descriptor to avoid segfault, reported by L. Dolezel - add Israel DVB-T, requested by B. Nahari - update S13E0 transponders - fix bug introduced by \'transponder scan logic modified\' in 20120128, which prevents -x option on US vsb/qam, reported by \'locuse\' - add experimental cmake build support. For now building with autotools is still the standard way, but if you want to test, use cd w_scan- mkdir build && cd build cmake .. make make install
* Tue Feb 14 2012 joerg.lorenzenAATTki.tng.de- Update to version 20120128 - modify dvb api < 5.5 logic, to find out which delsys are supported by hw - init-data: plot only verified data - transponder scan logic modified:
* alloc_transponder(): add newly allocated transponder only to new_transponders, if freq not yet known.
* tune_to_transponder(): add tuned transponder only to scanned_transponders, if freq not yet known.
* find_transponder(): replaced by find_transponder_by_freq()
* TODO: check side effects on 2nd gen delsys- Version 20120112 - add hack to allow compile against api 5.3- Version 20120111 - initial DVB-T2 support. Thanks for testing, code snippets and suggestions to Rolf Ahrenberg. - go back to allow to compile with DVB-API >= 5.3 and remove configure check (too early) - add video type to vdr output - change CAid to uppercase in vdr output - restructure Parameter print inside vdr output - add audio type and subtitling pids if vdr version > 1.7 (even if no \'1.8.0\' exists yet)- Version 20120108 - fix a few compiler warnings, reported by rofa - fix configure script to check for DVB API >= 5.5 as reported by rofa - copy current transponder before parsing NIT in case of terrestrial since T2 delsys descriptor doesnt report all settings belonging to hardware.- Version 20120107 - big cleanup:
* no longer tune with dvb api 3.2 drivers (pls upgrade your drivers)
* remove all occurencies of.. - BANDWIDTH_
* - FE_QPSK - FE_QAM - FE_OFDM - FE_ATSC
* remove #ifdef\'s for features in dvb api added before 5.5; therefore: COMPILING NOW NEEDS DVB API 5.5 OR HIGHER !
* because ofdm is no longer used by DVB-T only, Satellite frontends not only use QPSK, DVB-C2 will use OFDM similar to DVB-T(2): - rename ofdm_
* to terr_
* - rename qam_
* to cable_
* - rename qpsk_
* to sat_
* - rename tuning parameters - prepare on newer desciptors:
* add T2_delivery_system_descriptor (untested - need testers)
* add C2_delivery_system_descriptor (no linux support yet at all)
* prepare on SH_delivery_system_descriptor (no functionality yet)
* add network_change_notify_descriptor (no functionality yet) - prepare on DVB-T2 scan:
* add bandwidths 10MHz, 1,712MHz
* add FEC_3_5, FEC_4_5 (DVB-T2)
* add QAM256 to terrestrial scan (DVB-T2)
* add transmission modes 1k,16k,32k (DVB-T2)
* add guard interval 1/128, 19/128, 19/256 - add several new items to the internal transponder tuning data for later support of DVB-C2 and DVB-T2 - now set plp_id during tune id terrestrial scan and delivery_system = SYS_DVBT2 - try to discover supported delivery_systems per frontend using new ioctl DTV_ENUM_DELSYS if DVB driver has api version 5.5 or higher (fallback otherwise) - now do CRC32 checks in w_scan and prolong timeouts if CRC failures occur (may help in some cases if bad reception) - extend output format for \'scan\' initial_tuning_data to deal with DVB-T2/DVB-C2.
* old: # T [# comment] [#] C [# comment]
* new: # T[2] [plp_id] [system_id] [# comment] [#] C[2] [plp_id] [data_slice_id] [system_id] [# comment] (NOTE: it\'s time to adopt \'scan\' to API V5 && at least DVB-T2!) - update documentation in ./doc to reflect file change of initial_tuning_data
* Thu Oct 20 2011 joerg.lorenzenAATTki.tng.de- Update to version 20111011 - add S152E0, S156E0, S166E0, update S160E0, thanks to ozvdr (Hans) - no longer skip over the following audio formats in case of VDR output (now supported by vdr)
* 13818-7 audio w. ADTS transp syntax
* 14496-3 audio w. LATM transp syntax - change xine output: old: output standard audio only. new: output AC3 audio. If not found, fall back to standard audio - change mplayer output: old: output \'+\' separated list of standard audio pids. new: output \'+\' separated list of ac3 audio pids, followed by standard audio pids. - change vlc xspf output:
* apply stray newlines patch for vlc dvb-s format, as reported by Juergen Lock (cosmetics)
* convert to UTF-8 using glibc
* remove unneeded duplicated char recoding
* Sun Jul 03 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110702 - add requested format \'Gstreamer Plugin dvbsrc\' - fix counting services - cosmetics
* Fri Jun 17 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110616 - updates to several satellites, thanks to Dotan Porat for reporting and providing initial patches
* Nilesat 101/102 + Atlantik Bird 4A
* one transponder on Astra 19E2
* Amos 1/2/3
* Tue May 03 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110502 - fix wrong ATSC 8VSB and 16VSB identifiers for xine output, thanks to M.Krufky - now assume country = US, if frontend type = ATSC. This should work, since most non-US countries using ATSC still use the same channel lists as US. - now assume vdr format vdr-1.7, if VSB/QAM-B scan with vdr settings. ATSC users of VDR anyway need to patch their sources or upgrade to latest developer releases. - check if choosen frontend type fits to choosen scan type - extend -a option to allow string /dev/dvb/adapterN/frontendM you may now use -a (0..7) or -a /dev/dvb/adapter(0..7)/frontend(0..7)
* Fri Apr 15 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110410 - fix qam setting BR - add option -C , output coding (default: guess users codepage). if given, w_scan uses iconv to translate to this charset, i.e. \'w_scan -fc -cDE -C utf-8\' if not given, w_scan tries to
*guess
* your charset and translates to that. - now guess users country if -c not given. - add compiler flags: Wall, Wextra, Wno-comment, Wswitch-default, Wno-unused-parameter - remove all remaining whitespaces.
* Thu Apr 07 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110329 - add Brasil ISDB-T/DVB-C, thanks to Mauro Carvalho Chehab - changed command line option \'-S\':
* ordering of srates
* add 6086
* add 5217
* remove 7000, because unreasonable - update man page accordingly - update S23E5 TP16- Version 20110313 - update S41E9 and rename to S42E0
* Thu Mar 24 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110306 - NOTEAATTmaintainers: it\'s called \'w_scan\', not \'w-scan\' or \'wscan\'.
Please fix if mistyped in your repo. - fix memory leak in parse-dvbscan.c:142 (dvbscan_parse_tuningdata; char
* buf) - fix memory leak in parse-dvbscan.c:489 (dvbscan_parse_rotor_positions; char
* buf) - fix double deallocating pointer in scan.c:2999 (main; int frontend_fd) - fix memory leak in scan.c:2654 (main; char
* country) - fix memory leak in scan.c:2722 (main; char
* satellite) - fix memory leak in scan.c:3192 (main; char
* initdata) - remove unused videodev.h from countries.c. Thanks to Felix Kaechele. - fix octals in countries.c (backport from vdr-plugin wirbelscan-0.0.7) - check/report hardware frequency and symbolrate limits to avoid error messages in syslog - fix option -L (VLC output) in case of DVB-S. Thanks to Juergen Lock.
* Fri Feb 25 2011 joerg.lorenzenAATTki.tng.de- Update to version 20110206 - bugfix: fix wrong comparison in check_frontend(), which lets the caller assume that to not yet have pll lock and wait until timeout is over. This may speed up each tuning to a new transponder a little. Thanks to Dick Streefland. - set PILOT_AUTO on satellite transponders found by NIT. There\'s no flag inside NIT to find explicitly \'ON\' or \'OFF\', so AUTO is the very best approach here. Thanks to Dick Streefland. - change to in satellites.{c,h} and countries.{c.h} for better compat with wirbelscan-0.0.6. - add channel identifier USERLIST to channellist_t for compat with wirbelscan-0.0.6
* Tue Dec 21 2010 joerg.lorenzenAATTki.tng.de- Update to version 20101204 - add experimental output format libvlc xspl playlist. Thanks to Zouhair Souissi for libVLC m3u patch, which was partially used for implementation. - update manpage - multiple AC3 pids - bug fix: missing string termination in parse_psip_vct (ATSC only) - cosmetics
* Fri Oct 01 2010 joerg.lorenzenAATTki.tng.de- Update to version 20101001 - add: DVB-C symbol rates 6956, 6956.5 for New Zealand - mplayer output format as suggested by Pedro A. Aranda - cosmetics
* Fri Jul 02 2010 joerg.lorenzenAATTki.tng.de- Update to version 20100529 - bugfix: if compiled with DVB-API-5.x, but using DVB-API-3.2 AATT DVB-S, IF was not assigned before tuning. Thanks to Juergen Lock. - added some descriptor id\'s - update Astra 1E/1G/3A - changed help examples (wrong country id). Thanks to Tobias Grimm.
* Sun Apr 11 2010 joerg.lorenzenAATTki.tng.de- Update to version 20100316 - update Hispasat 1C/1D S30W0 - zero pids fix - add Telstar 5 S97W0 - add ATSC channel syntax VDR-1.7.14 - add DVB-C symbol rates 5156, 5483
* Wed Jan 27 2010 joerg.lorenzenAATTki.tng.de- Initial package, version 20091230