Changelog for geoipupdate3-cron-3.1.1-6.1.noarch.rpm :
Tue Sep 11 14:00:00 2018 Paul Howarth - 3.1.1-1
- Update to 3.1.1
- Allow parsing of license keys longer than 12 characters

Fri Aug 17 14:00:00 2018 Paul Howarth - 3.1.0-1
- Update to 3.1.0
Changes in version 3.0.0:
- BREAKING CHANGE: When downloading the free databases without a MaxMind
account, you must either not have \'AccountID\', \'UserId\', or \'LicenseKey\'
set in your configuration file or they must be set to the zero values
previously recommended in our documentation; any other value will cause an
authorization error
- BREAKING CHANGE: The configuration options \'Protocol\',
\'SkipPeerVerification\', and `SkipHostnameVerification` are no longer
supported; if they are present in the configuration file, they will be
ignored - HTTPS with peer and hostname verification will be used on all
requests
- BREAKING CHANGE: The configuration file must have the \'AccountID\' or the
deprecated \'UserId\' when downloading a paid database; previously, when
downloading the GeoIP Legacy Country database, you were able to only
provide the \'LicenseKey\'
- IMPORTANT: \'geoipupdate-pureperl.pl\' has been removed and will no longer be
distributed with \'geoipupdate\'; this Perl script had known issues and did
not have feature parity with the C implementation
- This program no longer uses the following endpoints:
\'/app/update_getipaddr\', \'/app/update\', and \'/app/update_secure\';
\'/geoip/databases/{edition_id}/update\' is now used instead
- Fixed issue in \'gu_strnlen()\' dereferencing a pointer before checking that
it was in array bounds
- We now update the default GeoIP.conf during installation so that directory
paths match build parameters; previously this config always said the data
directory was under /usr/local/share which was not always accurate
- Improve the error checking and display the underlying reason for the error
when possible (GH#82)
- Document that the \'LockFile\' is not removed from the filesystem after a
successful exit from the program (GH#79)
- Make default configuration directory agree with default installation
directory
Changes in version 3.0.1:
- When there were no updates available, 3.0.0 incorrectly returned an exit
code of 1 instead of 0; this release reverts to the pre-3.0.0 behavior,
returning an exit code of 0 in this case
Changes in version 3.1.0:
- This version restores the ability to use the \'AccountID\'/\'UserId\' 999999
along with an all-zero license key when downloading free databases;
however, the use of this combination is not recommended and may break in
future versions
- When printing verbose output, only the first four characters of the
\'LicenseKey\' will now be displayed

Fri Jul 13 14:00:00 2018 Fedora Release Engineering - 2.5.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild

Wed Feb 7 13:00:00 2018 Fedora Release Engineering - 2.5.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

Tue Oct 31 13:00:00 2017 Paul Howarth - 2.5.0-1
- Update to 2.5.0
- Replace use of strnlen() due to lack of universal availability (GH#71)
- Document the \'LockFile\' option in the \'GeoIP.conf\' man page (GH#64)
- Remove unused base64 library (GH#68)
- Add the new configuration option \'PreserveFileTimes\'; if set, the
downloaded files will get the same modification times as their original on
the server (default is \'0\') (GH#63)
- Use the correct types when calling \'curl_easy_setopt()\'; this fixes
warnings generated by libcurl\'s \'typecheck-gcc.h\' (GH#61)
- In \'GeoIP.conf\', the \'UserId\' option was renamed to \'AccountID\' and the
\'ProductIds\' option was renamed to \'EditionIDs\'; the old options will
continue to work, but upgrading to the new names is recommended for
forward compatibility

Wed Aug 2 14:00:00 2017 Fedora Release Engineering - 2.4.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild

Wed Jul 26 14:00:00 2017 Fedora Release Engineering - 2.4.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild

Fri May 26 14:00:00 2017 Paul Howarth - 2.4.0-1
- Update to 2.4.0
- geoipupdate now checks that the database directory is writable: if it is
not, it reports the problem and aborts
- geoipupdate now acquires a lock when starting up to ensure only one
instance may run at a time: a new option, \'LockFile\', exists to set the
file to use as a lock (\'.geoipupdate.lock\' in the database directory by
default)
- geoipupdate now prints out additional information from the server when a
download request results in something other than HTTP status 2xx; this
provides more information when the API does not respond with a database
file
- ${datarootdir}/GeoIP is now created on \'make install\' (GH#29)
- Previously, a variable named \'ERROR\' was used, which caused issues building
on Windows (GH#36)
- Drop EL-5 support
- Drop BuildRoot: and Group: tags
- Drop explicit buildroot cleaning in %install section
- Drop explicit %clean section
- noarch subpackages always available now
- libcurl-devel always available now

Fri Feb 10 13:00:00 2017 Fedora Release Engineering - 2.3.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild

Thu Jan 5 13:00:00 2017 Paul Howarth - 2.3.1-1
- Update to 2.3.1
- geoipupdate now uses TCP keep-alive when compiled with cURL 7.25 or
greater
- Previously, on an invalid gzip file, geoipupdate would output binary data
to stderr; it now displays an appropriate error message
- Install README, ChangeLog, GeoIP.conf.default etc. into docdir (GH#33)
- $(sysconfdir) is now created if it doesn\'t exist (GH#33)
- The sample config file is now usable (GH#33)

Wed Feb 3 13:00:00 2016 Fedora Release Engineering - 2.2.2-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild

Fri Jan 22 13:00:00 2016 Paul Howarth - 2.2.2-1
- Update to 2.2.2
- geoipupdate now calls fsync on the database directory after a rename to
make it durable in the event of a crash
- Update autotools patch

Wed Jun 17 14:00:00 2015 Fedora Release Engineering - 2.2.1-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild

Mon Apr 13 14:00:00 2015 Paul Howarth - 2.2.1-2
- Split patch for upstream issue #26 into separate patches for upstream changes
and effect of running autotools

Wed Mar 4 13:00:00 2015 Philip A. Prindeville - 2.2.1-1
- Update to 2.2.1
- geoipupdate now verifies the MD5 of the new database before deploying it;
if the database MD5 does not match the expected MD5, geoipupdate will exit
with an error
- The copy of \'base64.c\' and \'base64.h\' was switched to a version under
GPLv2+ to prevent a license conflict
- The \'LICENSE\' file was added to the distribution
- Several issues in the documentation were fixed
- Use interim fix for upstream issue #26 until it\'s accepted:
https://github.com/maxmind/geoipupdate/issues/26
- Add buildroot and clean, BR: curl-devel rather than libcurl-devel for
EL-5 compatibility

Tue Feb 10 13:00:00 2015 Paul Howarth - 2.1.0-4
- New geoipupdate6 cron script written in Perl that doesn\'t download the data
if it hasn\'t changed

Fri Feb 6 13:00:00 2015 Paul Howarth - 2.1.0-3
- Add cron6 subpackage, equivalent to old GeoIP-update6 package
- Revise obsoletes/provides

Sun Feb 1 13:00:00 2015 Philip A. Prindeville - 2.1.0-2
- Remove architecture-specific dependency in noarch subpackage

Mon Jan 26 13:00:00 2015 Philip A. Prindeville - 2.1.0-1
- Initial review package (generated by rpmdev-newspec)