SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG

 
 
Changelog for libqmi-tools-1.22.0-lp150.2.1.x86_64.rpm :

* Tue Jan 08 2019 bjorn.lieAATTgmail.com- Update to version 1.22.0: + Build now looks for the correct python provider in the system during configure. + New services: New \'QoS\' (Quality of Service) service, with some minimal initial implementation to support flow/network status querying. Additionally, some Sierra-specific commands are also implemented that allow querying per-bearer statistics (e.g. if multiple dedicated and default LTE bearers are used). + New request/responses/indications: - loc: new \"Register Events\" request/response. - loc: new \"NMEA\" indication. - loc: new \"Engine State\" indication. - loc: new \"Fix Recurrence Type\" indication. - loc: new \"GNSS Sv Info\" indication. - loc: new \"Inject Predicted Orbits Data\" request/response/indication. - loc: new \"Get Predicted Orbits Data Source\" request/response/indication. - loc: new \"Set Server\" request/response/indication. - loc: new \"Get Server\" request/response/indication. - loc: new \"Delete Assistance Data\" request/response/indication. - loc: new \"Set Operation Mode\" request/response/indication. - loc: new \"Get Operation Mode\" request/response/indication. - loc: new \"Inject XTRA Data\" request/response/indication. - uim: new \"Card Status\" indication. - wds: new \"Get Default Profile Num\" request/response. - wds: new \"Set Default Profile Num\" request/response. - wds: new Sierra-specific \"Swi Create Profile Indexed\" request/response. + New TLVs supported in existing messages: - loc: added multiple new TLVs in the \"Position Report\" indication, which was a minimal skeleton in previous releases. - loc: added \'Fix Recurrence Type\' TLV in \"Start\". - loc: added \'Minimum Interval between Position Reports\' TLV in \"Start\". - nas: added \'Acquisition Order Preference\' TLV in \"Set System Selection Preference\" and \"Get System Selection Preference\". - nas: added \'Phy CA Agg Secondary Cells\' TLV in \"Get LTE Cphy CA Info\". - wds: added \'WDS APN Disabled Flag\' TLV in \"Create Profile\", \"Modify Profile\" and \"Get Profile Settings\". - wds: added \'WDS Roaming Disallowed Flag\' TLV in \"Create Profile\", \"Modify Profile\" and \"Get Profile Settings\". + libqmi: - Assume TLVs < 0x10 are mandatory by default. - Fixed some missing QmiProtocolErrors and updated some existing ones. - Implemented support to allow enabling QMI indications when in MBIM mode. - Addded missing QmiNasBandPreference and QmiDmsLteBandCapability flags. - Deprecate QMI_CORE_ERROR_TLV_EMPTY, as empty TLVs are allowed by the protocol and totally valid e.g. in 0-sized string-type TLVs. - Moved all deprecated APIs to \'qmi-compat.h\' header. + qmicli: - New \'--loc-get-position-report\' command. - New \'--loc-get-gnss-sv-info\' command. - New \'--loc-follow-position-report\' command. - New \'--loc-follow-gnss-sv-info\' command. - New \'--loc-follow-nmea\' command. - New \'--loc-delete-assistance-data\' command. - New \'--qos-get-flow-status\' command. - New \'--qos-get-network-status\' command. - New \'--qos-swi-read-data-stats\' command. - New \'--qos-reset\' command. - New \'--wds-create-profile\' command. - New \'--wds-modify-profile\' command. - New \'--wds-delete-profile\' command. - New \'--wds-get-default-profile-num\' command. - New \'--wds-set-default-profile-num\' command. - New \'--wds-swi-create-profile-indexed\' command. - Added support to request acquisition order preference updates when using \'--nas-set-system-selection-preference\'. - Fixed slot indices in \'--uim-get-card-status\'. - Fixed \'--uim-set-pin-protection\', \'--uim-verify-pin\", \"--uim-unblock-pin\", and \'--uim-change-pin\', so that a dummy application identifier is always used. - Updated so that all commands work even through QMI over MBIM, even if indications are required to complete the command (e.g. most PDC and LOC commands). + qmi-network: Avoid creating invalid --wds-start-network when APN is not set. + Several other minor improvements and fixes.
* Mon Aug 13 2018 bjorn.lieAATTgmail.com- Update to version 1.20.2: + qmicli: - Exit on --wds-start-network parse errors. - Fix reading current technology in - -wds-get-data-bearer-technology. - Remove implicity casts to GDestroyNotify in g_clear_pointer(). + qmi-firmware-update: - Fix --ignore-version-errors. - Fix byte counts in error message. + libqmi-glib: - dms: factory settings related operations since 1.0 - Avoid closing same file descriptor twice. - Don\'t leak the inner MbimDevice if MBIM_QMUX_ENABLED.- Add no-dependency-on filter to rpmlintrc, filter out false warning about missing deps in devel package.
* Thu Mar 08 2018 jengelhAATTinai.de- Update summary to standard language
* Wed Feb 28 2018 dimstarAATTopensuse.org- Modernize spec-file by calling spec-cleaner
* Mon Jan 22 2018 luc14n0AATTlinuxmail.org- Update to version 1.20.0: + New services: loc - new \"LOC\" (location) service, which e.g. allows controlling GPS devices in newer modules that don\'t implement the PDS service. Just some very basic implementation for now. + New request/responses: - nas: new \"Attach/Detach\" request/response messages. - wds: new \"Get Channel Rates\" request/response messages. - dms: new \'Swi Get/Set USB Composition\' request/response messages. + New TLVs supported in existing messages: - nas: new \'Extended LTE Band Preference\' TLV in \"Set/Get SSP\". - dms: new \'Extended LTE Band Capability\' TLV in \"Get Band Capabilities\". + libqmi: - New: . QMI_DEVICE_SIGNAL_REMOVED signal in the QmiDevice object, propagated through the qmi-proxy. . QMI_CLIENT_VALID property in the QmiClient that allows detecting whether the underlying QmiDevice is usable or not. - Defined additional LTE bands. + qmicli: - New: --wds-set-ip-family, --wds-get-channel-rates, - -uim-read-record, --dms-swi-get-usb-composition and - -dms-swi-set-usb-composition commands. + libqmi-glib: - Prefer realpath() to canonicalize_file_name(). - Avoid signals sent to the qmi-proxy process. + qmi-firmware-update: Support USB3->USB2 mode changes during upgrade.- Update Url to https://www.freedesktop.org/wiki/Software/libqmi/: current libqmi\'s web page.- Add pkgconfig(gio-unix-2.0) BuildRequires: it was being pulled by another pkgconfig module that live in glib2-devel package and used already.
* Thu Nov 02 2017 mpluskalAATTsuse.com- Do not rely on env for python during build- Run spec-cleaner
* Wed May 10 2017 zaitorAATTopensuse.org- Update to version 1.18.0: + libqmi: - Implemented support for vendor-specific commands through a new qmi_device_command_full() operation and a new QmiMessageContext type. - New \'QMI_DEVICE_OPEN_FLAGS_AUTO\' flag in qmi_device_open() which allows automatic detection of the underlying protocol in a cdc-wdm device (either QMI or MBIM) and transparently uses it based on that. - New qmi_device_close_async() operation, which allows closing a QmiDevice asynchronously. - Fixed QmiWmsCdmaCauseCode enum names, and provided a compatibility layer keeping the old names to avoid breaking API. + New services: pdc: new \"PDC\" (persistent device configuration) service, which among other things, allows configuring the HP lt4120. + New TLVs supported in existing messages: wda: updated \"Set Data Format\" request to allow specifying endpoint type and interface number. + qmi-firmware-update: This is a completely new tool that allows upgrading firmware in (at least) Sierra Wireless devices with MDM9200, MDM9x15 or MDM9x30 chipsets. Run the tool with --help and --help-examples to get more information on how to use it. + qmicli: - The CLI no longer requires the \'--device-open-mbim\' explicit option when opening QMI capable MBIM devices, the automatic detection of QMI over MBIM is enabled by default. - New \'--device-open-qmi\' option to disable the automatic detection of protocol and force using QMI. - If running in MBIM mode, enable MBIM logs and traces. - By default the QmiDevice will be closed before exiting, e.g. so that the MBIM session is also closed. + docs: - Updated the documentation so that each QMI message and each TLV specifies in which libqmi version it was introduced, using \"since:\" tags in the QMI message databases. - Added indices for new symbols introduced in the major libqmi releases, as well as for symbols flagged as deprecated.- Add pkgconfig(gudev-1.0) BuildRequires: New optional dependency.
* Thu Nov 17 2016 dimstarAATTopensuse.org- Update to version 1.16.2: + DMS: flagged several methods as available since DMS 1.1. + NAS: Fix RX/TX mixup in \'Get LTE Cphy CA Info\'. + qmi-proxy: - Fix segfault when trying to use already disposed clients. - Fix segfault when trying to use already disposed transactions. - Plug several memleaks in error conditions. + qmicli: Added support for IP type in --wds-start-network. + build: fix checking for libmbim.
* Tue Jul 12 2016 brunoAATTioda-net.ch- Packaging: + add missing exclude in rpmlintrc + add BuildRequires for having QMUX over MBIM option
* Mon Jul 11 2016 brunoAATTioda-net.ch- Update to version 1.16.0 + New --enable-mbim-qmux option during configure, which enables the support for using an MBIM control device as transport for the QMI messages, only if the MBIM device implements the \"QMI service\". This setting is automatically enabled if libmbim >= 1.14.0 is found in the system, and can be explicitly disabled with --disable-mbim-qmux. + New request/responses: - nas: new \"Get LTE Cphy CA Info\" request/response. - nas: new \"Force Network Search\" request/response. + qmi-network: - Fixed several bashisms. + Added compatibility symbols for some API breaks introduced in 1.14.0: - qmi_message_dms_set_service_programming_code_input_get_\\ current was renamed to qmi_message_dms_set_service_\\ programming_code_input_get_current_code. - qmi_message_dms_set_service_programming_code_input_get_new was renamed to qmi_message_dms_set_service_programming_code_\\ input_get_new_code. - qmi_message_dms_set_service_programming_code_input_set_\\ current was renamed to qmi_message_dms_set_service_\\ programming_code_input_set_current_code. - qmi_message_dms_set_service_programming_code_input_set_new was renamed to qmi_message_dms_set_service_programming_code_\\ input_set_new_code. - QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE was renamed to QMI_NAS_SIM_REJECT_STATE_SIM_AVAILABLE. + libqmi-glib: - Fixed QMI_DMS_BAND_CAPABILITY_BC_15 enum value so that it isn\'t treated as a negative value. + qmicli: - Fixed --dms-get-band-capabilities output on 32-bit platforms. - Fixed license text of the voice service implementation.
* Sat Apr 09 2016 zaitorAATTopensuse.org- Update to version 1.14.2: + Added compatibility symbols for some API breaks introduced in 1.14.0: + This release will recover the old names and still keep the new ones around for compatibility. + libqmi-glib: Fixed QMI_DMS_BAND_CAPABILITY_BC_15 enum value so that it isn\'t treated as a negative value. This may actually be treated as a minor ABI break. + qmicli: Fixed --dms-get-band-capabilities output on 32-bit platforms. + Fixed license text of the voice service implementation.- Changes from version 1.14.0: + This version comes with a couple of small API breaks: + ECIO value type in \"NAS Event Report Indication\" is given as unsigned. + ECIO value in ECIO List array type in \"NAS Get Signal Strenght\" is given as unsigned. + QMI_NAS_SIM_REJECT_STATE_SIM_AVAILABLE enum name was fixed. + The library and tools now support working with modems which only implement raw IP (i.e. no ethernet headers) in the WWAN interface. This relies on the kernel to expose \'/sys/class/net//qmi/raw_ip\' sysfs files for each WWAN network interface (available since Linux 4.5-rc1). + New initial support for the \'Voice\' service. + The qmicli tool has been updated with several new functionalities. + The qmi-network helper script has been updated with several new features. + Added command completion support in qmicli. + Other bugfixes and minor improvements.- Bump soname following upstream changes, and as a result: rename subpackage to libqmi-glib5.
* Wed Mar 23 2016 jengelhAATTinai.de- Improve description; say what QMI is
* Mon Feb 15 2016 zaitorAATTopensuse.org- Update to version 1.12.8: + codegen: fix bug which was limiting the transaction ID of request messages generated to just 8bits. + device: try to debug-print raw invalid QMI messages too. + Additional bugfixes: - build: avoid C++ reserved keywords. - nas: correct ID for Get RF Band Information result TLV. - qmicli: fix PLMN printing.
* Thu Feb 26 2015 zaitorAATTopensuse.org- Update to version 1.12.6: + Fix big-endian handling of tlv->length.
* Wed Feb 25 2015 mgorseAATTsuse.com- Added COPYING and COPYING.LIB and fixed license attribute for debug utils
* Wed Feb 11 2015 zaitorAATTopensuse.org- Update to version 1.12.4: + Fix reading last call packet statistics. + Added support for the \"DMS Set FCC\" command, required to bring out of low power mode several new Sierra devices.
* Sun Feb 01 2015 zaitorAATTopensuse.org- Update to version 1.12.2: + Fix bug reading sized-guints, which was making --dms-get-time segfault. + Fix compilation warnings in 32 bit systems. + Add missing services in get_printable() and get_version_introduced().
* Wed Jan 28 2015 dimstarAATTopensuse.org- Update to version 1.12.0: + New `--enable-qmi-username\' option during configure, which allows specifying which will be the user owning the /dev/cdc-wdm character devices of all QMI modems (udev rules are installed to change file ownership). If this option is used, the qmi-proxy will only allow connections from processes running by the specified user or by the root user. + New TLV builder and reader API, which is much more strict and secure. The autogenerated code will no longer first check if there is enough space available in the output message buffer and then write the parsed contents. Instead, the new reader API will be used, which is able to check for the expected size directly before writing in the buffer. + New unit tests to check messages built by the libqmi-glib library, using a fake proxy. In order to support these, the QmiDevice has two new properties: - \"device-no-file-check\": instructs the QmiDevice to avoid checking if the specified file exists. - \"device-proxy-path\": specifies a custom abstract socket path for the QmiProxy, to avoid using the default one. + New A-GPS support in the PDS service: - pds: added \"Get Default Tracking Session\" request/response. - pds: added \"Set Default Tracking Session\" request/response. - pds: added \"Get AGPS Config\" request/response. - pds: added \"Set AGPS Config\" request/response. + Updated minumum available version of several messages: - dms: \"UIM Get IMSI\" seems to be available in DMS 1.1 already. - dms: \"UIM Get ICCID\" seems to be available in DMS 1.1 already. + Other bugfixes and minor improvements: - Attach timeout and idle events to the thread-default context. - Fix bashisms in the qmi-network script. - Fix qmi_message_set_transaction_id() in non-CTL messages. - Fix segfault due to race condition in the QmiProxy. - Fixed printing contents of structs with fixed sized strings in qmi-codegen.- Drop libqmi-1.10.2-fix-bashisms.patch: fixed upstream.
* Thu Nov 27 2014 Led - fix bashisms in qmi-network script- add patches:
* libqmi-1.10.2-fix-bashisms.patch
* Mon Oct 06 2014 mardnhAATTgmx.de- Update to version 1.10.2: + release: bump version to 1.10.2 + build: update NEWS + cli,nas: S/N ratio is dB, not dBm + cli,nas: limit resolution when printing floating point numbers + cli,nas: fix constant out of range issue in comparison + cli,nas: fix unmatched format specifiers + release: post release version bump to 1.10.1 + release: bump version to 1.10.0 + cli,nas: decode BCD-encoded PLMN and print it + cli,nas: pretty print field types + cli,nas: don\'t print fields with unknown data + cli,nas: add missing indentations + nas: add \'UMTS Info Neighboring LTE\' TLV to \'Cell Location Info\' + nas: fix several TLV field types + nas: consolidate variable names + nas: add missing TLV field + nas: trivial fixes in indentation and alignment + docs,libqmi-glib: add \'NAS Get Cell Location Info\' documentation + qmi-codegen: handle \'gfloat\' types + qmicli: fix wrong array reference cutnpaste bug + qmicli: add NAS Get Cell Location Info + nas: add \"Get Cell Location Info\" + libqmi-glib,proxy: update internal default timeout value + cli,wda: new \'--wda-set-data-format\' action + cli,wda: fix error string message + libqmi,wda: rename enum to \"_RAW_IP\" to match the name in the CTL service + wda: implement \'Set Data Format\' request/response + cli,wda: new \'--wda-get-data-format\' action + wda: new \'WDA\' service + cli: new \'--uim-get-card-status\' action + uim: implement \"Get Card Status\" + data: add libqmi icon + license: add GPLv2+ license in addition to the LGPLv2+ one + build-aux,qmi-codegen: explicitly state which services have flags64 + libqmi-glib,device: print as debug flags used when opening or releasing client + qmicli: add \'--device-open-net\' option + libqmi-glib: generate types for QmiDeviceOpenFlags and QmiDeviceReleaseClientFlags
* Sun Jan 26 2014 zaitorAATTopensuse.org- Update to version 1.8.0: + This version comes with one small API break: Enum value QMI_SERVICE_RMTFS is not 0x14, but 14. + Support for sharing the QMI port through multiple processes with the new \'qmi-proxy\' infrastructure. + api: Added new known service ID enumeration values. + wds: Added \"Get Profile List\", \"Get Profile Settings\", \"Get Default Settings\" request/response. + cli: Add --wds-get-profile-list & --wds-get-default-settings. + man: Added qmi-network manpage, autogenerated from --help-all.- Changes from version 1.6.0: + This version comes with one small API break: dms: \'SID\' TLV in \"Activate Manual\" is a guint8, not a string. + Extended API with macros to check for the libqmi-glib version in use. + Setup libtool versioning in libqmi-glib. + Added initial support for the PBM (phonebook) service. + Added initial support for the UIM service. + Added initial support for the OMA (Open Mobile Alliance) service. + nas: added \"Get Tx Rx Info\" request/response. + wds: added \"Get Packet Statistics\" request/response. + dms: added support for the \'PRL\' TLV in \"Activate Manual\". + cli: add --nas-get-tx-rx-info, --wds-get-packet-statistics, - -get-service-version-info, --uim-read-transparent, - -uim-get-file-attributes. + cli: fix following network status until disconnected. + tests: use gtester to run unit tests. + man: added qmicli manpage, autogenerated from --help-all. + Also fixed several minor bugs and memory leaks.- Bump soname following upstream changes, this means that package libqmi-glib0 will be renamed to libqmi-glib1.
* Wed Jan 22 2014 dimstarAATTopensuse.org- Update to version 1.4.0: + dms: fix minimum version requirement for DMS Get/Set Operating Mode. + nas: added \'Network Time\' indication. + utils: fix reading sized uints in BE systems. + cli: add --dms-activate-manual. + cli: implemented setting System Selection Preference. + cli: fix technology preference persistence reporting. + cli: fix reading new PIN in \'--dms-uim-change-pin\'. + docs: always generate documentation at dist time. + tests: fixed BE/LE tests in BE systems.- Changes from version 1.2.0: + Builds with Python3. + Fixed DMS activation code string handling. + Enhanced \"start network\" functionality in qmicli.
* Mon Dec 10 2012 dimstarAATTopensuse.org- Initial package, release 1.0.
 
ICM