Changelog for
libhamlib++4-devel-4.0_git20181107-1.1.x86_64.rpm :
Fri Nov 9 13:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181107
Add ability to have rigctld display transverter frequency
Wed Nov 7 13:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181106
Quell clang6 warnings
Mon Nov 5 13:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181103
Remove TARGETABLE_MODE from ft3000
Tue Oct 30 13:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181029
ft817: adding delay before next retry after returning from tx to rx
Add FT-DX3000 definition and promote FT-DX5000 to Stable
ft817: Moving delay value into #define section of the header
Fri Oct 26 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181026
Quell compiler warnings
Thu Oct 25 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181025
Fix multi-mode-mapping
Ensure read_string value is terminated
Fix icmarine duplicate read
Tue Oct 2 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20181001
Some calls to thd72_get_menu_item where passing wrong values for range check.
Improving reliability working with radios cloning FT817 protocol
Sun Sep 16 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20180916
Ass support for CM108AH chipsets
Update power reading values for FT900
Thu Aug 30 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20180830
Change ft100 RTTY to PKTUSB for compatibility with WSJT-X
Thu Aug 23 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20180821
ELAD FDM DUO backend added
Sun Aug 19 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20180816
Fix kenwood SQ squelch set
Sat Aug 11 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20180809
Fix RFPOWER level for FT-450D
In newcat_open(), initialize rig_id if a subsequent command need it
Tue Aug 7 14:00:00 2018 dl8fclAATTdarc.de
- update to version 4.0_git20180806
including all changes for release 3.3
Thu Aug 2 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180802
man pages updated
Tue Jul 17 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180717
Fixes for the piHPSDR backend
Force back to split after set_vfo A if needed,
Fixes split getting turned off
Tue Jun 26 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180625
Really fix TS590S/SG RIG_LEVEL_STRENGTH
Sat Jun 23 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180622
Fix TS590S/SG RIG_STRENGTH readings
Add RAWSTR to ts590
Changes to remove unnecessary VFO swaps
Tue May 29 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180525
Fix netrigctl.c returning wrong value
Thu May 24 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180524
Improve network connect error message
Add debug time stamps via -Z and --debug-time-stamps
Reverse bad patch for Android
Adding correct get/set functions for LNA- Mixer- IF gain of the FuncubePro+
Fix compile warnings
Fix TenTec OmniVII get_mode for VFOB
Fix -Z option on rigctld
Update man pages for content and conformance
Move utility man page files to doc/man1
Add PKTAM PKTFM modes to ic7300
Fixed PKTFM filters in ic7300
Added TRXManager backend
WIP: thd72 driver
Allow rigctld to continue operating after tcp or serial rig disappears
Fix read_string terminator length parameters
Fix modes on trxmanager
Implement some more interfaces. Comment out get_chan_all_cb because
FLRig thread safety improved and now works WSJT-X split mode with multiple connections
Added functionality for the IC-7300 auto antenna tuner
flrig improvements to minimize relay chattering
Wed Mar 28 14:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180327
Allow rigctld to reopen after error
Sat Mar 24 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180323
Create HTML manual at \'make dist\' time
Tue Mar 20 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180319
Update AOR 3030 to actually work now. Tested with WSJT-X
Mon Mar 19 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180317
Remove incorrectly included file
Fri Mar 16 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180316
IC-7300: Enable get_split_vfo and remove rptr_shift/rptr_offs,
which are not supported.
Fix kenwood.c to compile with MinGW
Wed Mar 14 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180313
Fix K3 send_morse and change generic to 0x20 padding per manual
Fix morse send of a single space
Tue Mar 13 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180311
FT-817 status queries honour retries and timeout
Thu Mar 8 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180307
Add Rohde&Schwarz xk2100 backend for W1AW
Sat Mar 3 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.3_git20180302
including all changes for release 3.2
Fri Feb 23 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.2_git20180223
Fix IC-7000 RIG_OP_TUNE command
Fix bug in vfo_comp calculation in Hamlib
Mon Feb 19 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.2_git20180219
Addition of support for CM108B PTT
Sun Jan 28 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.2_git20180128
Switching from sprintf to snprintf to avoid possible seqfaults,
Workaround for fldigi
Wed Jan 24 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.2_git20180121
- IC-7300: Fix issues in Icom civ_version 1 parameters implementations
- Add an option to output static values for RIG_LEVEL_STRENGTH and
RIG_LEVEL_RAWSTR
Thu Jan 18 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.2_git20180118
Fix for TS-711 and TS-811
Mon Jan 15 13:00:00 2018 dl8fclAATTdarc.de
- update to version 3.2_git20180114
Add IC-7610
Mon Dec 25 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20171225
Add --without-libusb option to configure script
Fix IC-7300 S-meter calibration table length
Add Flex 6400/6600
Add 60m band for all 3 IARU regions and 4m band for region 1. IC-7300…
Fix IC-7300 S-meter calibration table length
Sat Oct 28 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20171008
Modified coding style to Allman
Formatted src/ to final coding guidelines
Tue Sep 26 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170912
Changes to make microHam support compile under MinGW
Mon Sep 11 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170911
Microham support. Use \"uh-rig\" for rig_pathname to talk to the
microHam device for CAT.
IC 7100, set_powerstat = icom_set_powerstat
Fix serial_port DCD squelch
Tue Sep 5 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170903
Fix hardcoded pcconfig libdir
Sun Aug 13 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170812
Add best guess transmit status to rig state structure
Take out unecessary delays in K(X)3(S) back end
Tue Aug 8 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170803
Fix off-by-one issue in reading memory mode from IF command response
Fix some issues with commands not supported by TS-2000 CAT emulations
Fri Jul 28 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170728
Update ax_python_devel.m4 macro
Bindings tweaks for Python and TCL
Fix TCL script test target--check-tcl
Apply silent rule variables to Python
Apply silent rules to Perl to the extent possible
Apply silent rules to LUA
Rename autogen.sh to bootstrap to follow GNU guidelines
Install certain top level files into docdir
Thu Jul 20 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170720
IC-M710 now working with WSJST-X
Initial Python3 build steps and test script
Add icm710.h to icmarine Makefile.am
Sun Jul 16 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170716
Use snprintf throughout kenwood/kenwood.c for buffer safety
Tue Jul 11 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170710
Fix FLRig segfault and strlen cast
Sun Jul 9 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170708
Add FLRig backend
netrigctld enabled to trigger two different CAT commands (Mic or Data)
Fri Jul 7 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170704
Add Barrett 2050 backend
Thu Jun 29 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170628
Fix FT-891/991 behavior with WSJT-X
Fixed indentation warnings detected by newer gcc
Sun Jun 18 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170530
Initial controls for the rs-hfiq sdr
Do not set DTR/RTS on dedicated PTT port if it is already closed
Tue May 30 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170530
Initial controls for the rs-hfiq sdr
Do not set DTR/RTS on dedicated PTT port if it is already closed
Tue May 30 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170523
Fixes for kenwood backends
Stop rigctld and rotctld crashing when service threads cannot
write to clients
New rotator model: SPID MD-01/02 in ROT2 mode
fixed reading the rig\'s return value in newcat_get_tx_vfo
Thu May 11 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170511
Icom IC-R10 & 20 move to beta
Fri Apr 7 14:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170406
New model: Icom IC-R6
Allow RIG_LEVEL_STRENGTH queries over the network link
Sun Mar 5 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170227
Fix a state machine defect with repeated PTT reset calls
Add Dorji DRA818 modules (VHF and UHF variants)
Sun Feb 19 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170219
Fix some endian issues in the si570/AVR SDR back ends
Added x108g backend
Fix FT-891 recognition
Breakout FT-1000D file for full support
Fix DIG MODE for FT817-ND
Add support for AGC Levels
Sat Jan 28 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170127
Added HPSDR backend
Fix ic785x default addr to 0x8e
Clears potential garbage data in read buffer prior to command being sent
Updated PiHPSDR backend defaults
Use Windows ioctlsocket to avoid buffer overrun
Add get and set split functions for the TS450S
Simplify and fix defects in the FT991 back end
Added HPSDR backend
Sat Jan 7 13:00:00 2017 dl8fclAATTdarc.de
- update to version 3.2_git20170107
Fix ft991_get_mode
New models: IC-7849/IC-7851, FT-891
Sun Dec 25 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.2_git20161225
Fix typos
Corrected a few bugs and rebased from Ervin\'s (HA2OS) pull request.
Added new example to Python demo script (set/get float type level)
Added Lua binding and demo script
Adds test for ID 907 for the Flex 6300
python-binding and lua-binding enabled
Sat Nov 19 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20161119
Move K3 DT0 before mode switch, add version info to electraft rig open,
WSJT-X VOX rig split now works
Tue Nov 8 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20161106
New Perseus model
Fixed buffer overflow in rigctl_parse and rotctl_parse
Changed some modules to LGPL in lieu of GPL
Change the IC7600 & IC7800 set/get mode to versions that support DATA…
fix set_vfo behavior of TS2000
fix NET rigctl
Mon Sep 5 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160904
xg3: fix buffer overflow
Fix issue with TS-570S|D open in rig_caps
Release the serial port used for PTT when possible
Sat Aug 27 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160827
Fix an issue presenting on the Yaesu FT-450(D)
Fix issue with TS-570S|D open in rig_caps
Updated smeter calibration for ic7300
Sun Jun 12 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160611
implemented set_conf, get_conf and Token fast_set_commands for max
throughput
Yaesu Fast Set Commands (High throughput for commands)
added send_morse and civ_version to ic7100/ic7600
added get/set_conf for FT1200, FT2000, FT450, FT5000 and FT9000
Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300
Changes for IC-7300 and IC-7200
Mon May 23 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160521
Do not attempt to query AI state on several Kenwood rigs
Add some functionality to the tmd710
Add send_morse to icom rigs
Do not crash if expected CTCSS tones not sepcified
Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode a…
Initial support for the IC-7300
Mon Apr 4 14:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160402
Added support for Icom IC-2730
Use rig state rig port retry option rather than from capabilities
Use a sensible port timeout value for the Kenwood TS-850
Make sure right band is used when setting frequency on IC-910(H)
VFO targetable get frequency operation for the Icom IC-910(h)
Better set frequency semantics for the IC-910(h)
Do not swap VFO unnecessarily
Elide unnecessary CAT commands when setting split frequency and mode
Add {get,set}_splitfrequency_mode for the IC-910(H)
Implement rig_{set,get}_split_freq_mode() for IC-756 series.
Initial implementation of rig_{set,get}_split_freq_mode() for FT-857.
Implement combined split VFO frequency and mode setting.
Fixed get_vfo for FT-757GX(II)
Allow the ft757gx to work with WSJT-X
Add 23cms to IC-910(H) backend
Improve IPv6 portability and consistency
Various Yaesu updates
Add get_freq to FRG-100
Favor $HOME over \'~\' in text
Fix a logic error in band detection during IC-910 set frequency
Merge branch \'ic910-set-freq\' of git://git.code.sf.net/u/bsomervi/hamlib
Sat Jan 16 13:00:00 2016 dl8fclAATTt-online.de
- update to version 3.1_git20160115
Fix possible frequency overflow on Kenwood and Yaesu
Install daemon man files to man1
New Prosistel rotor backend from IZ7CRX
Fix missing PKTUSB mode setting code for FT-817 & FT-897
Fri Dec 11 13:00:00 2015 dl8fclAATTdarc.de
- update to version 3.1_git20151207
Fix FT-817/857/897 issues and add some missing functionality
Use correct function to execute set type commands with no response
Add a new command line option \'--no-restore-ai\' (\'-n\') to rigctl
Allow for poor emulations of Kenwood rigs that have no ID command
Attempt to restore AI status on exit
Proper IPv6 and dual stack networking
Sun Nov 22 13:00:00 2015 dl8fclAATTt-online.de
- update to version 3.1_git20151122
Remove unecessary delays from TS-940S backend
Mon Nov 9 13:00:00 2015 dl8fclAATTdarc.de
- update to version 3.1_git20151109
change command validation for Yaesu set commands
Sun Sep 20 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.1_git20150920
fix kenwood_set_mode for ts590s and mode CW, RTTY or AM
Thu Sep 3 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150903
Add library paths for tests
Sat Aug 22 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150822
New CNCTRK rotor backend
Mon Aug 17 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150815
Fixes power level reporting for the Omni VII. Backend is
promoted to STABLE status.
Fixes S meter reporting for FT857 and FT991.
Fixes rig split for FT991. Working now for WSJT-X rig split mode.
Mon Jul 27 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150727
Allows the FT-991 to work with Fake Split in WSJT-X
Fri Jul 17 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150717
Fix for Yaesu FT-991
Fri Jul 3 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150703
Omni VII patch for WSJT-X
Sat May 23 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150523
Omni VII set VFO_CURR correctly
Sun Apr 26 14:00:00 2015 dl8fclAATTdarc.de
- update to version 3.0_git20150425 - beta version
with a lot of new features and new rig backends
Fri Nov 9 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.15.3
Fri Feb 3 13:00:00 2012 dl8fclAATTdarc.de
- update to version 1.2.15
Sun Jul 31 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.14
Sun May 29 14:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.13.1
Sun Mar 13 13:00:00 2011 dl8fclAATTdarc.de
- update to version 1.2.13
Mon Sep 6 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.2.12
Mon Jun 7 14:00:00 2010 dl8fclAATTdarc.de
- update to version 1.2.11
Mon Nov 2 13:00:00 2009 dl8fclAATTdarc.de
- update to version 1.2.10
Sun Mar 1 13:00:00 2009 dl8fclAATTdarc.de
- update to version 1.2.9