Changelog for smartmontools-6.6-141.1.x86_64.rpm :

* Tue Sep 25 2018 sbrabecAATTsuse.com- Fix smartd.service EnvironmentFile (boo#1095662).
* Fri Jun 22 2018 kukukAATTsuse.de- Add smartd_generate_opts.path and smartd_generate_opts.service to update smartd_opts if sysconfig is modified. Needed for [FATE#325524].
* Tue Apr 17 2018 sbrabecAATTsuse.com- Fix SUSE default of S.M.A.R.T. checks: really enable nightly short tests (bsc#1073918).
* Thu Feb 08 2018 sbrabecAATTsuse.com- Make possible to disable broken SAT support by -d scsi+cciss,N (bsc#1038271, smartmontools-scsiata-scsi_only.patch, https://www.smartmontools.org/ticket/871).- Update smartmontools.keyring.
* Mon Dec 18 2017 avindraAATTopensuse.org- update to 6.6 version (FATE#321901, FATE#322874) - smartctl:
* -i\' and \'--identify\': ATA ACS-4 and SATA 3.3 enhancements.
* Control ATA write cache through SCT Feature Control with \'-s wcache-sct,ata|on|off[,p]\' and \'-g wcache-sct\'.
* Print ATA Pending Defects log with \'-l defects\'.
* \'-s wcreorder,on|off\': New persistent flag \',p\'.
* \'-s standby\': Prevent temporary drive spinup.
* \'-n POWERMODE\': New parameter to set exit status.
* \'-g security\': ATA Security Level check fixed.
* \'-l scttemp
*\': Print minimum supported ERC Time Limit.
* \'-q noserial\': Now also suppresses \"SAS address\" output.
* \'-i\': Print IEEE EUI-64 of NVMe namespace.
* \'-c\': Print NVMe 1.3 feature flags.
* \'-A\': Print NVMe 1.3 thermal temperature transition statistic.
* \'-g/s dsn\': Get/set ATA DSN. - smartd
* Uses also device identify information to detect for duplicate devices.
* \'-e dsn\' directive: Set ATA DSN.
* Improved SCSI/SAS temperature logging.
* Silence emails and log messages on open errors of \'-d removable\' devices.
* Exit on device open error unless \'-q never\' or \'-d removable\' is specified (regression). - update-smart-drivedb: Now authenticates downloaded file with GnuPG. - update-smart-drivedb: New options \'--trunk\', \'--no-verify\' and \'--export-key\'. - Device type \'-d intelliprop,N\' for IntelliProp controllers. - SCSI: Default timeout increased to 1 minute. - configure: New options \'--with-gnupg\', \'--with-scriptpath\' and \'--with-update-smart-drivedb=X.Y\' - configure: Checks for C++11 support option and requires \'--with[out]-cxx11-option\' if option unknown or no C++11 support. - HDD, SSD and USB additions to drive database. - New smartmontools-
* mailing list addresses. - Man page formatting reworked. - Linux:
* Uses SG_IO V4 API if supported.
* Devices behind hpsa driver are no longer detected as regular SCSI devices. - Darwin: Initial NVMe support based on undocumented API. - FreeBSD:
* Fix panic on INVARIANTS enabled kernel.
* Improve ATA SMART STATUS check for legacy controllers.
* Compile fix for FreeBSD-11 and newer. - NetBSD:
* NVMe support.
* Full 28-bit ATA support.
* Compile fix.
* Use a raw disk device file. - OpenBSD: Compile fix. - OS/2: Support for the OS2AHCI driver, updating source code, adding autoscan support, adding self-test support. - Windows fixes:
* Support for Windows 10 NVMe driver (stornvme.sys).
* Fix CSMI access for IRST driver 15.2.
* smartd: Ability to run PowerShell scripts with \'-M exec\'.
* smartd: New PowerShell script to send smartd warning emails without external tools.
* package now provides PDF man pages.- switch to new url- drop upstreamed patches:
* smartmontools-scsi-suppress-no-temperature.patch
* smartmontools-scsi-temperature-check.patch
* smartmontools-log-scsi-temperature.patch- regen smartmontools-drivedb.h
* Thu Nov 23 2017 rbrownAATTsuse.com- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)
* Fri Jul 14 2017 sbrabecAATTsuse.com- SCSI temperature error fixes (bsc#1047198, smartmontools-scsi-suppress-no-temperature.patch, smartmontools-scsi-temperature-check.patch, smartmontools-log-scsi-temperature.patch).
* Mon Dec 19 2016 sbrabecAATTsuse.com- Drop systemd dependency on syslog.target (bsc#983938, smartmontools-systemd-no-syslog.patch). https://lists.opensuse.org/opensuse-packaging/2013-05/msg00102.html
* Wed Dec 07 2016 aginiesAATTsuse.com- update to 6.5 version
* Experimental support for NVMe devices on FreeBSD, Linux and Windows.
* smartctl \'-i\', \'-c\', \'-H\' and \'-l error\': NVMe support.
* smartctl \'-l nvmelog\': New option for NVMe.
* smartd.conf \'-H\', \'-l error\' and \'-W\': NVMe support.
* Optional NVMe device scanning support on Linux and Windows.
* configure option \'--with-nvme-devicescan\' to include NVMe in
* default device scanning result.
* Device scanning now allows to specify multiple \'-d TYPE\' options.
* ATA: Added new POWER MODE values introduced in ATA ACS-2.
* ATA: SCT commands are no longer issued if ATA Security is locked.
* SCSI: LB provisioning improvements.
* SCSI: Fixed GLTSD bit set/cleared info messages.
* SCSI: Solid State media log page is no longer checked for tapes.
* SCSI: Improved handling when no tape cartridge in drive.
* SCSI: Workaround for buggy Seagate firmware.
* SAT: Improved heuristics to detect bogus sense data from SAT layer.
* smartd: Fixed crash on missing argument to \'-s\' directive. update-smart-drivedb: Now uses HTTPS for download by default.
* update-smart-drivedb: New options to select URL and download tool.
* update-smart-drivedb: New download tool \'svn\'.
* configure option \'--without-update-smart-drivedb\' to disable update-smart-drivedb script.
* configure options \'--disable-drivedb\', \'--enable-savestates\', \'--enable-attributelog\' and \'--with-docdir\' are no longer supported.
* autoconf < 2.60 and automake < 1.10 are no longer supported.
* Drive database file now also includes the DEFAULT setting for each attribute.
* HDD, SSD and USB additions to drive database.
* Darwin: New support files for package installer.
* New makefile target \'install-darwin\' builds DMG image.
* Solaris: Auto detection of SATA devices behind SAT layer.
* Solaris SPARC: Legacy ATA support disabled by default. New configure option \'--with-solaris-sparc-ata\' enables it. File os_solaris_ata.s is no longer included in source tarball.
* Windows: Auto detection of USB devices specified by drive letter.
* Windows: Device scanning does no longer ignore unknown USB devices.
* Windows: Prevent drive spin up by \'-n standby\' check.
* Windows: New application manifests indicating Win 10 support.
* Windows smartd: \'-m [sys]msgbox\' is no longer supported.
* Windows installer: Defaults to 64-bit version on 64-bit Windows.
* Various code changes suggested by Clang Static Analyser and Cppcheck.- enable \"--with-nvme-devicescan\" option- update smartmontools-drivedb.h file- use --with-savestates, --with-attributelog, --docdir instead of old options
* Thu Jan 14 2016 meissnerAATTsuse.com- replaced keyring with 2015/2016 key. pub rsa2048/0xDF0F1A49C4A4903A 2014-12-31 [verfällt: 2016-12-31] Schl.-Fingerabdruck = F41F 01FC 0784 4958 4FFC CF57 DF0F 1A49 C4A4 903A uid [ unbekannt] Smartmontools Signing Key (through 2016)
* Sun Jan 10 2016 p.drouandAATTgmail.com- Update to version 6.0.4
* Device type \'
*d usbprolific\' for Prolific PL2571/277x USB bridges.
* SAT: Support for ATA registers returned in fixed format sense data.
* smartctl \'
*i\' and \'
*
*identify\': ATA ACS
*4 and SATA 3.2 enhancements.
* smartctl \'
*l xerror\': Support for logs with more than 255 pages.
* smartctl \'
*l devstat\': Prints ACS
*3 DSN flags.
* smartctl \'
*l devstat\': Read via SMART command if GP log is not available.
* smartctl \'
*l scttempsts\': Prints SCT SMART STATUS (ACS
*4) and vendor specific SCT bytes.
* configure option \'
*
*with
*systemdenvfile=auto\' as new default.
* configure options \'
*
*disable
*drivedb\', \'
*
*enable
*savestates\' and \'
*
*enable
*attributelog\' are deprecated.
* Corresponding \'
*
*with
*
*\' options are enhanced accordingly.
* Configure option \'
*
*with
*docdir\' is deprecated.
* autoconf < 2.60 and automake < 1.10 are deprecated. (all of the above still work but a warning is printed if used)
* HDD, SSD and USB additions to drive database.
* Linux: AACRAID fixes, SMART STATUS should work now.
* Linux: \'/dev/megaraid_sas_ioctl_node\' fd leak fix.
* Darwin: \'
*S\' command implemented, \'
*l devstat\' should work now.
* Cygwin: Compile fix.
* Windows: Device type \'
*d aacraid\' for AACRAID controllers.
* Windows: SAT autodetection based on IOCTL_STORAGE_QUERY_PROPERTY.
* Windows installer: Fix possible loss of user PATH environment variable.- Update smartmontools-drivedb.h to the latest version from the upstream branch RELEASE_6_4_DRIVEDB.- Cleanup and remove conditional macros; the package doesn\'t build for SLE anyway- Remove smartmontools-default-enabled.patch; not needed anymore
* Tue Mar 10 2015 sbrabecAATTsuse.cz- Run Self Tests:
* Short Self Test every night
* Extended Self Test every month
* Discussion: http://lists.opensuse.org/opensuse-factory/2015-03/msg00040.html- Dropped smartmontools-removable.patch- Created smartmontools-suse-default.patch
* Mon Mar 09 2015 sbrabecAATTsuse.cz- Package empty /etc/smartd_warning.d for warning plugins.- smartmontools-drivedb_h-update.sh: Fix default branch name.- Comment fixes.
* Tue Mar 03 2015 sbrabecAATTsuse.cz- Improve drivedb.h update scriptlets: Detect update across branches.- Check state of smartmontools-drivedb.h in %prep.- Add ghost records for files created by update-smart-drivedb.- Improve smartmontools-drivedb_h-update.sh script: Perform spec file changess.- Clean up on uninstall.- Update smartmontools-drivedb.h to the latest version from the upstream branch RELEASE_6_3_DRIVEDB.
* Fri Nov 14 2014 dimstarAATTopensuse.org- No longer perform gpg validation; osc source_validator does it implicit: + Drop gpg-offline BuildRequires. + No longer execute gpg_verify.
* Tue Oct 07 2014 sbrabecAATTsuse.cz- Re-add /usr/sbin/rcsmards symlink (bnc#900099).- Fix service restart in smartmontools.generate_smartd_opts.in (bnc#900099).
* Wed Sep 03 2014 roAATTsuse.de- re-add sysvinit support in specfile (fix build on sles11)
* Wed Sep 03 2014 roAATTsuse.de- update to version 6.3 - smartctl: Fixed bogus error messages from \'-g/-s wcreorder\'. - smartctl prints ATA form factor. - SCSI: Improved support of modern disks (SAS SSDs). - SCSI: Fixed sense data noise from old disks. - update-smart-drivedb man page. - configure option \'--with-smartdscriptdir\'. - configure option \'--with-smartdplugindir\'. - configure option \'--with-systemdenvfile\'. - configure option \'--with-working-snprintf\'. - Removed build time stamps to support reproducible builds. - Compile fixes for C++11. - HDD, SSD and USB additions to drive database. - Linux: Support for controllers behind AACRAID driver. - Linux: Fixed DEVICESCAN max path count. - FreeBSD: Fixed possible crash caused by wrong SCSI error handling. - FreeBSD: Compile fix for kFreeBSD. - Windows: Reworked CSMI port scanning. - QNX: Compile fix.- dropped patches: smartmontools-nobuild-date.patch (code removed upstream)
* Mon May 26 2014 crrodriguezAATTopensuse.org- Build with large file support in 32 bit systems.
* Thu Dec 05 2013 sbrabecAATTsuse.com- Add supplementary drivedb.h update script (smartmontools-drivedb_h-update.sh, bnc#851276).- Skip drivedb.h verification by rpm -V (bnc#851276).- Implement intelligent drivedb.h update not overwriting newer drivedb.h releases.- Update smartmontools-drivedb.h to the latest version from the upstream branch trunk.
* Mon Jul 29 2013 sbrabecAATTsuse.cz- Update to version 6.2:
* smartctl: Added ATA write cache reordering control using \'-g wcreorder\' and \'-s wcreorder,[on|off]\' options.
* update-smart-drivedb: Updated for new SVN repository.
* HDD, SSD and USB additions to drive database.
* Areca RAID support: Fixed possible segfault on empty port.
* HPT RAID support: Maximum disk number increased to 128.
* Fri Apr 05 2013 idonmezAATTsuse.com- Add Source URL, see https://en.opensuse.org/SourceUrls
* Thu Apr 04 2013 crrodriguezAATTopensuse.org- remove all sysvinit support.
* Mon Mar 18 2013 sbrabecAATTsuse.cz- Update to version 6.1:
* smartctl -l improved.
* smartctl -s/-g wcache and rcache for SCSI devices.
* smartctl prints more info for ATA and SCSI devices.
* smartctl \'--identify\' updated for latest ATA ACS-3 spec.
* smartd runs /etc/smartd_warning.sh to generate warning emails.
* smartd \'-w PATH\' option to specify this executable.
* smartd \'-d ignore\' directive.
* smartd DEVICESCAN ignores devices already specified.
* smartd: added support for -s and -A for SCSI devices.
* smartd \'-W\' directive uses ATA attribute 190 if 194 is missing.
* Support of larger SCSI defect lists via READ DEFECT(12).
* Device type \'-d usbjmicron,p\' for Prolific USB bridges.
* Many HDD, SSD and USB additions to drive database.
* Support for SAS disks behind Areca controllers.
* Improved support for SATA disks on LSI/Megaraid controllers.
* Disks on MegaRaid controllers are automatically scanned.- smartmontools.keyring: New signing key for the next 2 years.
* Wed Dec 12 2012 sbrabecAATTsuse.cz- Use sysconfig variables (sed on smartd.service.in) and generate smartd_opts for systemd smartd.service.- Remove obsolete parsing of /etc/default/smartmontools (it is no more in upstream installation).
* Thu Nov 29 2012 sbrabecAATTsuse.cz- Verify GPG signature.
* Tue Nov 20 2012 sbrabecAATTsuse.cz- Re-introduce smartmontools-sysconfig.patch with SMARTD_SAVESTATES, SMARTD_ATTRLOG and SMARTD_EXTRA_OPTS sysconfig variables (bnc#790044).
* Thu Nov 15 2012 sbrabecAATTsuse.cz- Update to version 6.0 (bnc#789204):
* option/directive \'-F nologdir\' and \'-F xerrorlba\'.
* smartctl \'--identify\' option.
* smartctl prints nominal media rotation rate (ATA).
* smartctl prints SATA version and speed.
* smartctl \'-l sataphy\' works for CD/DVD drives also.
* smartctl \'-x\' includes ATA Device Statistics.
* smartd warning emails include device identify info.
* smartd \'-d\' output is flushed to support redirection.
* Many HDD, SSD and USB additions to drive database.
* smartctl options \'-g, --get\' and \'-s, --set\' to get/set various ATA settings: AAM, APM, Read look-ahead, Write cache, Security (freeze), Standby mode/timer.
* smartd directive \'-e\' to set (most of) the above settings on startup.
* smartctl options \'-f hex\' and \'-f hex,[id|val]\'.
* smartctl does not start ATA self-test if another test is already running. Override with new option \'-t force\'.
* smartctl supports extended self-test polling times greater than 255 minutes.
* Controller-independent SAT detection: \'-d sat,auto[+TYPE]\'.
* smartd.conf DEFAULT directive.
* Support for SATA disks behind Areca SAS RAID controllers and HP Smart Array controllers.
* Tue Nov 06 2012 cooloAATTsuse.com- do no longer require syslog on 12.3, journal is enough for some installations
* Tue Sep 11 2012 cooloAATTsuse.com- buildrequire systemd to have working rpm macros
* Thu May 31 2012 sweet_f_aAATTgmx.de- update to the _latest_ smartmontools-5.42 tarball, see http://sourceforge.net/mailarchive/message.php?msg_id=28262364 \"The PKG_PROG_PKG_CONFIG macro was not expanded in configure\"- remove automake dependency
* Tue Feb 21 2012 sbrabecAATTsuse.cz- Disable PIE for SLE9.
* Wed Nov 30 2011 cooloAATTsuse.com- add automake as buildrequire to avoid implicit dependency
* Tue Nov 22 2011 crrodriguezAATTopensuse.org- When in a virtualized envirnment, hard disk monitoring with smartd is a task for the host, make systemd to skip the service if found running in such setup.
* Fri Oct 21 2011 sbrabecAATTsuse.cz- Upgrade to version 5.42 (bnc#725631):
* smartctl option \'-l devstat\' (Device Statistics).
* smartctl option \'-l ssd\' (SSD endurance indicator).
* smartd logs identify information of each SCSI/SAS device.
* smartd resends warning emails if problem reappears.
* smartd directives \'-l offlinests\' and \'-l selfteststs\'.
* Many HDD, SSD and USB additions to drive database.
* Platform-specific man pages.
* smartd.8 man page no longer includes smartd.conf.5.
* Support for Areca controllers enhanced.- Fixed pid file location (bnc#714647).
* Mon Oct 10 2011 brunoAATTioda-net.ch- reuse of %makeinstall to build for SLES11_SP1-
* Sun Oct 09 2011 brunoAATTioda-net.ch- upgrade to 5.41 Date 2011-06-09 - Failed self-tests outdated by a newer successful extended self-test are no longer reported as errors. - Support for ATA Long Logical/Physical Sectors (LLS/LPS). - \'smartctl --scan-open\' can create a draft smartd.conf. - smartctl prints World Wide Name (WWN) of ATA device. - smartctl option \'-f brief\' to select new attribute output format which includes more flags and fits in 80 columns. - smartd logs identify information and WWN of each ATA device. - smartd logs warning from drive database if present. - smartd logs changes of offline data collection status. - smartd directive \'-l scterc,READTIME,WRITETIME\'. - smartd preserves last scheduled selective self-tests span. - \'smartd.service\' file for systemd. - configure option \'--with-systemdsystemunitdir\' - configure option \'--with-exampledir\'. - configure searches for init.d or rc.d directory. - \'make install\' does no longer overwrite an existing smartd.conf file. - \'update-smart-drivedb\' does no longer require GNU sed. - Many HDD, SSD and USB additions to drive database. - Linux USB autodetection: Enable \'-d sat,16\' for newer kernels. - Linux megaraid: Fix segfault on non-data SCSI commands. - Linux megaraid: Fix pass-through of non-data ATA commands.- clean up old patches included in upstream- added systemd upstream configure option- added patch for FSF-address- clean up spec with spec-cleaner-
* Wed Jun 08 2011 sbrabecAATTsuse.cz- Added sysconfig options to set arbitrary smartd options and disable persistent state writes and attribute log (FATE#310460).- Decrease log message on unsupported state writes to DEBUG (FATE#310460).- Change sysconfig ServiceReload to ServiceRestart, otherwise sysconfig changes will not take effect until restart.
* Mon Mar 21 2011 cooloAATTnovell.com- licenses package is about to die
* Thu Feb 03 2011 pgajdosAATTsuse.cz- fixed smartctl -V command to show version [bnc#647521]
* modified nobuild-date.patch
* Thu Jan 13 2011 sbrabecAATTsuse.cz- Removed support for SLE9 and older.
* Tue Dec 07 2010 cooloAATTnovell.com- prereq init script syslog
* Thu Oct 21 2010 roAATTsuse.de- update to final 5.40 - configure: \'--enable-drivedb\' is now the default. - Improved support for Intel SSDs. - Improved support for SandForce based SSDs. - Many additions to drive database. - smartctl option \'-t vendor,N\'. - Linux: Support SATA drives on LSI 3ware 9750 controllers. - Fix regression in smartd SMARTD_DEVICE and SMARTD_DEVICETYPE environment variables.
* Wed Oct 06 2010 sbrabecAATTsuse.cz- Added rpmlintrc.- Removed Obsoletes for ancient packages.- Enabled attribute log.
* Tue Sep 28 2010 cristian.rodriguezAATTopensuse.org- Fix patch to remove build Dates- Update to a newer version of 5.39.1 branch in order to support libcap-ng so smartd can drop privileges
* Sun Aug 29 2010 cristian.rodriguezAATTopensuse.org- Do not include build enviroment infon in the binaries including date and time of compilation, makes build-compare happier.
* Mon Jun 28 2010 jengelhAATTmedozas.de- use %_smp_mflags
* Wed Feb 10 2010 sbrabecAATTsuse.cz- Updated to version 5.39.1:
* Fix regression in smartctl option \'-q, --quietmode\'.
* Fix regression in smartd directive \'-l selftest\'.
* Linux: Allow smartd \'DEVICESCAN -d sat\'.
* Linux: Fix spin-up of SATA drive if \'-n standby\' is used (bnc#576662).
* Support for up to 128 devices on 3ware controllers
* smartctl option \'-l xerror\' to print ATA SMART Extended Comprehensive Error Log
* Option \'-d sat+TYPE\' to use SAT with controllers which require \'-d TYPE\'
* Option \'-v ID,RAW_FORMAT,ATTR_NAME\' to add new vendor specific attributes
* Support for SSD drives using 64-bit raw attributes
* Many additions to drive database
* New simplified syntax for drive database
* Configure option to add drive database file to distribution
* smartd can now handle attributes 197 and 198 with increasing raw values
* smartd logs changes of self-test execution status
* smartd directive \'-n powermode,N\' to limit the number of skipped checks
* smartd flag \'!\' for \'-r\' and \'-R\' directives to log changes as critical
* Self-tests scheduled during system downtime or disk standby are run after next startup (bnc#469859).
* smartd option \'-s PREFIX\' to store smartd internal state until next startup
* smartd option \'-A PREFIX\' to log attributes at each check cycle
* Configure options to enable the above by default
* Change to an object oriented interface to access ATA and SCSI devices
* Modules migrated to new interface
* Rework of smartd data structures
* Checkin date and SVN revision and optional BUILD_INFO printed in version info
* SELinux fixes to 3ware device node creation
* Use getaddrinfo() instead of gethostbyname() to support IPv6
* Additional support for Samsung MLC flash drives
* Tue Feb 09 2010 sbrabecAATTsuse.cz- Changed daemon start policy from \"force yes\" to \"default start\" (bnc#567416).
* Mon Aug 10 2009 sbrabecAATTsuse.cz- Updated to the latest SVN snapshot:
* More drives recognized: Fujitsu MHW2 BJ series, WD Caviar Black family, Western Digital AV-GP series, Transcend Solid-State Drive and Transcend Solid-State Drive V series, Seagate Momentus 5400.5 series.
* Fix data type bug in checksum test for multi sector logs.
* Add USB ID of Seagate FreeAgent Go.
* Add experimental feature to log attribute values at each check cycle (ATA only).
* Heads up about a non backwardly compatible change introduced in draft SAT-2 (sat2r8b.pdf) that will break our existing SAT processing code. Action needed if change stands.
* smartctl: Don\'t report an attribute as failed if threshold is 0.
* Print only one warning on checksum errors in multi sector log.
* Require to specify PORT parameter of \'-d usbjmicron\' if two disks are connected.
* smartctl: Limit default number of printed entries for \'-l xerror\' to 8, for \'-l xselftest\' to 25.
* smartctl: Fix number of entries in \'-l xselftest\' output.
* Add USB IDs of a SunplusIT bridge, three WD drives, and an unsupported Iomega drive.
* smartd: Add \'!\' flag to \'-r\' and \'-R\' directives. If specified, message is logged as LOG_CRIT and warning mail is sent if attribute normalized or raw value changes.
* Add names for some attributes used in Samsung MLC drives: 178-180 & 183
* smartctl: Add option \'-x, --xall\' to print all info including extended SMART logs and non-SMART info.
* smartctl: Add \'-l xerror,error\' and \'-l xselftest,selftest\' to print the old logs if the extended logs are not supported.
* Disable 48-bit ATA commands for JMicron USB bridges by default.
* smartd: Don\'t ignore the \'-n\' directive when a self-test is scheduled.
* SCSI (SAS): implement \'-l sasphy,reset\'.
* SCSI (SAS): add \'-l sasphy\' and \'-l sasphy,reset\' into smartctl.
* Print General Purpose Logs even if GPL feature bit is missing.
* Sat Jul 18 2009 dominique-obsAATTleuenberger.net- bootstrap with automake-1.11
* Wed Jun 03 2009 sbrabecAATTsuse.cz- Updated to the latest CVS snapshot:
* SCSI: Fetch load-unload cycle counts
* smartd: Fix \'-M test\' directive in conjunction with \'-s\'
* knowndrives updates
* Add \'+\' modifier to smartd \'-C\' and \'-U\' directives
* Add experimental option \'-d usbsunplus\' for drives behind SunplusIT USB bridges.
* Add smartctl \'-d test\' option
* Add experimental USB device type autodetection
* Add new SMART STATUS check command for JMicron USB bridges
* Add smartctl option \'-l xerror[,NUM]\'
* Accept half healthy (and half unhealthy) indication from the SMART RETURN STATUS.
* Workaround for huge raw values of Reallocated_Sector_Ct and Reallocated_Event_Ct for newer Fujitsu disks.