Changelog for ghostscript-devel-9.22-1.1.x86_64.rpm :
Wed Nov 29 13:00:00 2017 jsmeixAATTsuse.de
- Version upgrade to 9.22.
For details see the News.htm and History9.htm files.
Highlights in this release include:

* Ghostscript can now consume and produce (via the pdfwrite
device) PDF 2.0 compliant files.

* The main focus of this release has been security and code
cleanliness. Hence many AddressSanitizer, Valgrind and
Coverity issues have been addressed.

* The usual round of bug fixes, compatibility changes,
and incremental improvements.
Incompatible changes

* The planned device API tidy (still!) did not happen for
this release, due to time pressures, but we still intend
to undertake the following: We plan to somewhat tidy up
the device API. We intend to remove deprecated device procs
(methods/function pointers) and change the device API
so every device proc takes a graphics state parameter
(rather than the current scheme where only a very few procs
take an imager state parameter). This should serve as notice
to anyone maintaining a Ghostscript device outside the
canonical source tree that you may (probably will) need
to update your device(s) when these changes happen.
Devices using only the non-deprecated procs should be
trivial to update.
- Up to 9.22rc1 it \"just built\" for all openSUSE versions but
since 9.22rc2 the libijs part does no longer buid for any
released openSUSE version where if fails with messages like
libtool: Version mismatch error.
This is libtool 2.4.6 Debian-2.4.6-2, but the
definition of this LT_INIT comes from libtool 2.4.2.
You should recreate aclocal.m4 with macros from
libtool 2.4.6 Debian-2.4.6-2 and run autoconf again.
Makefile: recipe for target \'ijs.lo\' failed
so that currently it only builds for Tumbleweed/Factory.
Presumably it is not too complicated to make it build again
also for released openSUSE versions but currently I have
less than zero energy to fix on such \"latest breaking changes\"
so that for now Ghostscript 9.22 is only provided for
openSUSE Tumbleweed/Factory and the upcoming SLE15/Leap15.

Fri Sep 29 14:00:00 2017 jsmeixAATTsuse.de
- Version upgrade to 9.22rc2 (second release candidate for 9.22).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing

Thu Sep 14 14:00:00 2017 jsmeixAATTsuse.de
- Version upgrade to 9.22rc1 (first release candidate for 9.22).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing
- Since Ghostscript 9.22rc1 font2c and wftopfa are removed.
- CVE-2017-5951.patch CVE-2017-7207.patch
CVE-2017-8291.patch and CVE-2017-9216.patch
are fixed in the version 9.22rc1 upstream sources.

Fri Jun 2 14:00:00 2017 daniel.molkentinAATTsuse.com
- CVE-2017-7207.patch fixes a NULL pointer dereference
in mem_get_bits_rectangle
see https://bugs.ghostscript.com/show_bug.cgi?id=697676
(bsc#1030263)
- CVE-2017-9216.patch fixes a NULL pointer dereference
in jbig2_huffman_get
see https://bugs.ghostscript.com/show_bug.cgi?id=697934
(bsc#1040643)

Tue May 2 14:00:00 2017 jsmeixAATTsuse.de
- CVE-2017-8291.patch fixes
a type confusion in .rsdparams and .eqproc
see https://bugs.ghostscript.com/show_bug.cgi?id=697808
and https://bugs.ghostscript.com/show_bug.cgi?id=697799
(bsc#1036453).

Wed Apr 12 14:00:00 2017 jsmeixAATTsuse.de
- CVE-2016-10317 (bsc#1032230)
heap buffer overflow in fill_threshhold_buffer()
is not yet fixed because there is no fix available at
https://bugs.ghostscript.com/show_bug.cgi?id=697459
- CVE-2016-10219 (bsc#1032138)
divide by zero in intersect()
https://bugs.ghostscript.com/show_bug.cgi?id=697453
is fixed in the version 9.21 upstream sources
- CVE-2016-10218 (bsc#1032135)
null pointer dereference in pdf14_pop_transparency_group()
https://bugs.ghostscript.com/show_bug.cgi?id=697444
is fixed in the version 9.21 upstream sources.
- CVE-2016-10217 (bsc#1032130)
use-after-free in pdf14_cleanup_parent_color_profiles()
that is related to pdf14_open() in base/gdevp14.c
https://bugs.ghostscript.com/show_bug.cgi?id=697456
is fixed in the version 9.21 upstream sources.
- CVE-2016-10220 (bsc#1032120)
null pointer dereference in gx_device_finalize() that is
related to gs_makewordimagedevice() in base/gsdevmem.c
https://bugs.ghostscript.com/show_bug.cgi?id=697450
is fixed in the version 9.21 upstream sources.
- CVE-2017-5951.patch fixes
null pointer dereference in ref_stack_index() that is
related to mem_get_bits_rectangle() in base/gdevmem.c
https://bugs.ghostscript.com/show_bug.cgi?id=697548
(bsc#1032114)

Mon Apr 10 14:00:00 2017 jsmeixAATTsuse.de
- Version upgrade to 9.21.
For details see the News.htm and History9.htm files.
Highlights in this release include:

* pdfwrite now preserves annotations from
input PDFs (where possible).

* The GhostXPS interpreter now provides the pdfwrite device
with the data it requires to emit a ToUnicode CMap: thus
allowing fully searchable PDFs to be created from XPS
input (in the vast majority of cases).

* Ghostscript now allows the default color space
for PDF transparency blends.

* The Ghostscript/GhostPDL configure script now has much
better/fuller support for cross compiling.

* The tiffscaled and tiffscaled4 devices can now
use ETS (Even Tone Screening)

* The toolbin/pdf_info.ps utility can now emit
the PDF XML metadata.

* Ghostscript has a new scan converter available
(currently optional, but will become the default in a near
future release). It can be enabled by using the command line
option: \'-dSCANCONVERTERTYPE=2\'. This new implementation
provides vastly improved performance with large and complex
paths.

* The usual round of bug fixes, compatibility changes,
and incremental improvements.
Incompatible changes:

* The planned device API tidy (still!) did not happen for
this release, due to time pressures, but we still intend
to undertake the following: We plan to somewhat tidy up
the device API. We intend to remove deprecated device
procs (methods/function pointers) and change the device API
so every device proc takes a graphics state parameter
(rather than the current scheme where only a very few procs
take an imager state parameter). This should serve as notice
to anyone maintaining a Ghostscript device outside the
canonical source tree that you may (probably will) need to
update your device(s) when these changes happen. Devices using
only the non-deprecated procs should be trivial to update.
- CVE-2016-7976.patch and CVE-2016-7977.patch and
CVE-2016-7978.patch and CVE-2016-7979.patch and
CVE-2016-8602.patch are no longer needed because
those issues are fixed in the upstream sources.
- 0001-mkromfs-make-build-reproducible-use-buildtime-from-S.patch
and
0002-mkromfs-sort-gp_enumerate_files-output-for-determini.patch
are no longer needed because both are included
in the upstream sources, see the upstream issue
https://bugs.ghostscript.com/show_bug.cgi?id=697484
- Again use the zlib sources from Ghostscript upstream
and disable remove-zlib-h-dependency.patch because
Ghostscript 9.21 does no longer build this way,
cf. the entry below dated \"Wed Nov 18 11:46:58 UTC 2015\"

Thu Jan 12 13:00:00 2017 stefan.bruensAATTrwth-aachen.de
- Set SOURCE_DATE_EPOCH based on changelog head
- Add 0001-mkromfs-make-build-reproducible-use-buildtime-from-S.patch

* Use SOURCE_DATE_EPOCH for mkromfs output for reproducible build
- Add 0002-mkromfs-sort-gp_enumerate_files-output-for-determini.patch

* Sort ROM contents for deterministic output

Mon Oct 17 14:00:00 2016 jsmeixAATTsuse.de
- CVE-2013-5653 (getenv and filenameforall ignore -dSAFER)
is fixed in the Ghostscript 9.20 upstream sources
see http://bugs.ghostscript.com/show_bug.cgi?id=694724
(bsc#1001951).
- CVE-2016-7976.patch fixes that
various userparams allow %pipe% in paths, allowing
remote shell command execution
see http://bugs.ghostscript.com/show_bug.cgi?id=697178
(bsc#1001951).
- CVE-2016-7977.patch fixes that
.libfile doesn\'t check PermitFileReading array, allowing
remote file disclosure
see http://bugs.ghostscript.com/show_bug.cgi?id=697169
(bsc#1001951).
- CVE-2016-7978.patch fixes that
reference leak in .setdevice allows
use-after-free and remote code execution
see http://bugs.ghostscript.com/show_bug.cgi?id=697179
(bsc#1001951).
- CVE-2016-7979.patch fixes that
type confusion in .initialize_dsc_parser allows
remote code execution
see http://bugs.ghostscript.com/show_bug.cgi?id=697190
(bsc#1001951).
- CVE-2016-8602.patch fixes a NULL dereference in .sethalftone5
see http://bugs.ghostscript.com/show_bug.cgi?id=697203
(bsc#1004237).

Thu Sep 29 14:00:00 2016 jsmeixAATTsuse.de
- Version upgrade to 9.20. Purely a maintenance release.
For details see the News.htm and History9.htm files.
Highlights in this release include:

* The usual round of bug fixes, compatibility changes,
and incremental improvements.
Incompatible changes:

* The planned device API tidy did not happen for this release,
due to time pressures, but we still intend to undertake the
following: We plan to somewhat tidy up the device API.
We intend to remove deprecated device procs
(methods/function pointers) and change the device API
so every device proc takes a graphics state parameter (rather
than the current scheme where only a very few procs take an
imager state parameter). This should serve as notice to anyone
maintaining a Ghostscript device outside the canonical source
tree that you may (probably will) need to update your
device(s) when these changes happen. Devices using only
the non-deprecated procs should be trivial to update.

Thu Sep 15 14:00:00 2016 jsmeixAATTsuse.de
- Version upgrade to 9.20rc1 (first release candidate for 9.20).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing

Wed Mar 23 13:00:00 2016 jsmeixAATTsuse.de
- Version upgrade to 9.19. Mainly a maintenance release.
For details see the News.htm and History9.htm files.
Highlights in this release include:

* Metadata pdfmark is now implemented. This allows the user
to specify an XMP stream which will be written to the
Catalog of the PDF file. A new pdfmark \'Ext_Metadata\' has
been defined. This takes a string parameter which contains
XML to be add to the XMP normally created by pdfwrite.
See \"pdfwrite pdfmark extensions\" for more information.

* An experimental, rudimentary raster trapping implementation
has been added to the Ghostscript graphics library.
See \"Trapping\" for details.
Incompatible changes:

* (Minor) API change: copy_alpha now supports 8 bit depth
(as well as the previous 2 and 4).

* The gs man pages are woefully out of date and basically
unmaintained. With the release following 9.19, we intend
to replace their contents with a very limited summary
of (unlikely to ever change aspects of) calling
Ghostscript, and a pointer to the (maintained) HTML
documentation. That is, unless a volunteer is willing
to update, and commit to maintaining the man pages.

* ijs-config is no longer provided
Planned incompatible changes:

* We plan (ideally for the release following 9.19) to somewhat
tidy up the device API. We plan to remove deprecated device
procs (methods/function pointers). We also intend to merge
the imager state and graphics state (thus eliminating the
imager state), and change the device API so every device proc
takes a graphics state parameter (rather than the current
scheme where only a very few procs take an imager state
parameter). This should serve as notice to anyone maintaining
a Ghostscript device outside the canonical source tree that
you may (probably will) need to update your device(s) when
these changes happen. Devices using only the non-deprecated
procs should be trivial to update.
- fix_make_install.patch fixes and
add_brackets_for_old_autoconf.patch are no longer needed
because both issues are fixed in the upstream sources.

Fri Mar 18 13:00:00 2016 jsmeixAATTsuse.de
- Version upgrade to 9.19rc1 (first release candidate for 9.19).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing
- ijs-config is no longer provided
- fix_make_install.patch fixes an install error and
add_brackets_for_old_autoconf.patch fixes an autoconf error
see http://bugs.ghostscript.com/show_bug.cgi?id=696665
- fix_ijs_and_x11_for_FirstPage_and_LastPage.patch is no longer
needed because it is fixed in the upstream sources.
- install_gserrors.h.patch is no longer needed because it is fixed
in the upstream sources.

Wed Nov 18 13:00:00 2015 schwabAATTsuse.de
- Do not use library sources for freetype jpeg libpng tiff zlib
from the Ghostscript upstream tarball because we prefer to use
for long-established standard libraries the ones from SUSE
in particular to automatically get SUSE security updates
for standard libraries.
In contrast we use e.g. lcms2 from the Ghostscript upstream
tarball because this one is specially modified to work with
Ghostscript so that we cannot use lcms2 from SUSE.
- remove-zlib-h-dependency.patch removes dependency on zlib/zlib.h
in makefiles as we do not use the zlib sources from the
Ghostscript upstream tarball.

Thu Nov 5 13:00:00 2015 jsmeixAATTsuse.de
- An incompatible change appeared when building other software
with Ghostscript 9.18.
Since version 9.18 Ghostscript does no longer provide
e_ (e.g. e_NeedInput) in its header files
(gserrors.h and ierrors.h).
When building other software with Ghostscript 9.18
gs_error_ (e.g. gs_error_NeedInput)
must be used, see boo#953149 and
http://bugs.ghostscript.com/show_bug.cgi?id=696317

Fri Oct 30 13:00:00 2015 jsmeixAATTsuse.de
- install_gserrors.h.patch installs gserrors.h to fix
http://bugs.ghostscript.com/show_bug.cgi?id=696301
because without gserrors.h several other packages fail to build
(in particular texlive, libspectre, gimp,...).

Mon Oct 12 14:00:00 2015 jsmeixAATTsuse.de
- fix_ijs_and_x11_for_FirstPage_and_LastPage.patch
fixes the Ghostscript device ijs and the x11
* devices
so that they also work when -dFirstPage/-dLastPage is used,
see http://bugs.ghostscript.com/show_bug.cgi?id=696246

Tue Oct 6 14:00:00 2015 jsmeixAATTsuse.de
- Version upgrade to 9.18. A maintenance release.
There are no recorded incompatible changes (as of this writing).
Highlights in this release include:

* A substantial revision of the build system and GhostPDL
directory structure. Ghostscript-only users should
not be affected by this change.

* A new method of internally inserting devices into the device
chain has been developed, named \"device subclassing\".
This allows suitably written devices to be more easily and
consistently as \"filter\" devices.
The first fruit of this is a new implementation of
the \"-dFirstPage\"/\"-dLastPage\" feature which functions
a device filter in the Ghostscript graphics library, meaning
it works consistently with all input languages.

* Plus the usual round of bug fixes, compatibility changes,
and incremental improvements.
See http://www.ghostscript.com/doc/9.18/News.htm
For details see the News.htm and History9.htm files.

Tue Sep 29 14:00:00 2015 jsmeixAATTsuse.de
- Version upgrade to 9.18rc2 (second release candidate for 9.18).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing
- assign_pointer_not_value_in_gximono.c.patch is no longer needed
because it is fixed in the upstream sources.

Thu Sep 24 14:00:00 2015 jsmeixAATTsuse.de
- Version upgrade to 9.18rc1 (first release candidate for 9.18).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing
- CVE-2015-3228.patch is no longer needed because it is fixed
in the upstream sources.
- assign_pointer_not_value_in_gximono.c.patch attempts to fix a
\"assignment makes pointer from integer without a cast\" compiler
warning by assigning the pointer and not the integer value.
- Removed --disable-compile-inits from configure, see
http://bugs.ghostscript.com/show_bug.cgi?id=696223
and \"Precompiled run-time data\" in
/usr/share/ghostscript/9.18/doc/Make.htm

Wed Jul 29 14:00:00 2015 jsmeixAATTsuse.de
- CVE-2015-3228.patch fixes out of bound read/write cause
by integer overflow in gsmalloc.c (boo#939342).

Tue Mar 31 14:00:00 2015 jsmeixAATTsuse.de
- Version upgrade to 9.16. Primarily a maintenance release.
There are no recorded incompatible changes (as of this writing).
Highlights in this release include:

* \"LockColorants\" command line option for tiffsep and psdcmyk
devices.

* Improved high level devices handling of Forms.
See http://www.ghostscript.com/doc/9.16/News.htm
For details see the News.htm and History9.htm files.
- fix.including.pread.pwrite.pthread_mutexattr_settype.diff
is no longer needed because it is fixed in the upstream sources.

Wed Mar 25 13:00:00 2015 jsmeixAATTsuse.de
- fix.including.pread.pwrite.pthread_mutexattr_settype.diff
fixes on SLE11 implicit declaration of function warnings
for \'pread\' \'pwrite\' \'pthread_mutexattr_settype\' see
http://bugs.ghostscript.com/show_bug.cgi?id=695882
- ppc64le-support.patch is a remainder of the previous patch
now the hunk for LCMS (lcms/include/lcms.h) is removed
because LCMS 1.x is removed since Ghostscript 9.16
but the hunk for LCMS2 (lcms2/include/lcms2.h) is still needed
see http://bugs.ghostscript.com/show_bug.cgi?id=695544

Fri Mar 20 13:00:00 2015 jsmeixAATTsuse.de
- Version upgrade to 9.16rc2 (second release candidate for 9.16).
For details see the News.htm and History9.htm files.
Regarding installing packages (in particular release candidates)
from the openSUSE build service development project \"Printing\"
see https://build.opensuse.org/project/show/Printing

Fri Mar 20 13:00:00 2015 jsmeixAATTsuse.de
- For SLE12 build it with traditional CUPS 1.5.4 to ensure
it works on SLE12 both with CUPS 1.7.5 and CUPS 1.5.4.

Sun Sep 28 14:00:00 2014 roAATTsuse.de
- readd ppc64le patch ppc64le-support.patch (adapted for lcms2 in
Ghostscript version 9.15): the tests in lcms2.h cannot work
without \"include \" that is now added and
regardless that lcms is not used by default (unless the
configure option --with-lcms is set), lcms is again fixed
(see http://bugs.ghostscript.com/show_bug.cgi?id=695544).

Tue Sep 23 14:00:00 2014 jsmeixAATTsuse.de
- Version upgrade to 9.15. Primarily a maintenance release.
There are no recorded incompatible changes (as of this writing).
Highlights in this release include:

* Ghostscript now supports the PDF security handler revision 6.

* The pdfwrite and ps2write (and related) devices can now be
forced to \"flatten\" glyphs into \"basic\" marking operations
(rather than writing fonts to the output), by giving
the -dNoOutputFonts command line option (defaults to \"false\").

* PostScript programs can now use get_params or get_param to
determine if a page contains color markings by reading the
pageneutralcolor state from the device (so whether the page
is \"color\" or \"mono\"). Note that this is only accurate when in
clist mode, so -dMaxBitmap=0 and -dGrayDetection=true should
both be used.

* The pdfwrite device now supports Link annotations with GoTo
and GoToR actions.

* The pdfwrite device now supports BMC/BDC/EMC pdfmarks

* Regarding the new color management for the pdfwrite device
introduced in the previous release, the proscription on using
the new color management when producing PDF/A-1 compliant files
is now lifted. To reiterate, also, with the new color
management implementation, using the UseCIEColor option is
strongly discouraged. For further information on the new
pdfwrite color management, see in Ps2pdf.htm the
\"Color Conversion and Management\" section.

* Plus the usual round of bug fixes, compatibility changes,
and incremental improvements.
For details see the News.htm and History9.htm files.

Wed Sep 17 14:00:00 2014 jsmeixAATTsuse.de
- Version upgrade to 9.15rc2 (second release candidate for 9.15).
Ghostscript upstream QA highlighted a couple of issues
that they felt warranted a fresh release candidate.
For details see the History9.htm file.

Tue Sep 9 14:00:00 2014 jsmeixAATTsuse.de
- Version upgrade to 9.15rc1 (first release candidate for 9.15).
For details see the News.htm and History9.htm files.
- ppc64le-support.patch is no longer needed because
it is fixed in the upstream sources.
- Removed trailing whitespaces in spec file and changes file.

Mon Aug 18 14:00:00 2014 meissnerAATTsuse.com
- gs does not seem to require libopenssl-devel for building.

Thu Mar 27 13:00:00 2014 jsmeixAATTsuse.de
- Version upgrade to 9.14. Primarily a maintenance release.
Highlights in this release include (excerpt):

* pdfwrite now uses the same color management engine as
Ghostscript rendering devices (by default LCMS2). For
the duration of this release a new switch -dPDFUseOldCMS
is available which will restore the old color management.
See: \"Color Conversion and Management\" in Ps2pdf.htm
Due to constraints of the PDF/A-1 specification, the new color
management does not yet apply when producing PDF/A files.

* A new device \'eps2write\' has been added which allows for the
creation of EPS files using the ps2write device instead of
the deprecated and removed pswrite device. The epswrite device
is now also deprecated and will be removed in a future release.

* Ghostscript has a new \"pwgraster\" output device for PWG Raster
output.

* The CUPS device now has improved support for PPD-less printing.
For details see the News.htm and History9.htm files.

Fri Dec 13 13:00:00 2013 uweigandAATTde.ibm.com
- ppc64le-support.patch from IBM fixes endianness
in lcms (the Little-CMS library) to support the new
architecture ppc64le (IBM Power PC Little Endian architecture)
because ppc64 is big-endian and ppc64le is little-endian
and lcms has a hard-coded check that assumes PowerPC
is always big-endian which is incorrect on ppc64le.
The fix is already in the main Little-CMS repository
by this Git commit
https://github.com/mm2/Little-CMS/commit/b4f5c91a2c1582bd284f0d0f49cb43e2c2235a79
(There are some cosmetic changes in the upstream patch.)
It is not yet in the imported copy in Ghostscript.
IBM will work with upstream to get the fix imported too.

Tue Sep 3 14:00:00 2013 jsmeixAATTsuse.de
- Version upgrade to 9.10. Primarily a maintenance release.
Highlights in this release include:

* LittleCMS2 and libpng have both been updated to the
latest versions.

* The URW Postscript font set has been updated to the
latest version, fixing many compatibility problems
with the Adobe fonts.

* The CUPS filters gstoraster and gstopxl have been
removed from Ghostscript. Those filters are now provided by
cups-filters (a free software package hosted by OpenPrinting)
that contains all CUPS filters needed by CUPS under Linux
(see also the openSUSE issue bnc#735404 comment#44 at
https://bugzilla.novell.com/show_bug.cgi?id=735404#c44).
For details see the News.htm and History9.htm files.
- fix-undefined-operation.patch is no longer needed because
it is fixed in the upstream sources.

Thu Aug 29 14:00:00 2013 jsmeixAATTsuse.de
- Version upgrade to 9.10rc1 (release candidate for the 9.10 version).
For details see the News.htm and History9.htm files.
- Prepare spec files to build both releases and release candidates
easily in the future by using special different version strings.
- fix-undefined-operation.patch fixes
http://bugs.ghostscript.com/show_bug.cgi?id=694546
- Removed BuildRequires for liblcms-devel because it is not needed
when we build Ghostscript that works in compliance with upstream
(see https://bugzilla.novell.com/show_bug.cgi?id=828751#c5).

Wed Mar 27 13:00:00 2013 mmeisterAATTsuse.com
- Added url as source.
Please see http://en.opensuse.org/SourceUrls

Tue Feb 19 13:00:00 2013 jsmeixAATTsuse.de
- Version upgrade to 9.07.

* As of this release (9.07), Ghostscript is distributed
under the GNU Affero General Public License (AGPL).

* Ghostscript has been extended to support file sizes >4Gb
in particular reading and writing PDF files.

* Color management enhancements. Full details of the color
management features can be found in: GS9_Color_Management.pdf

* The pdfwrite devices now supports linearized (or optimized
for fast web view) output directly (\"-dFastWebView\").

* With the addition of linearisation to pdfwrite, pdfopt.ps
has become redundant. Since it is difficult to maintain,
has a number of bugs, and is believed not to work properly
anyway, it is removed. Accordingly the pdfopt shell script
that used pdfopt.ps is also removed.

Thu Jan 3 13:00:00 2013 jsmeixAATTsuse.de
- Provide libijs (that is not done via \"configure --with-ijs\")
because libijs is needed by the pdftoijs filter in the
cups-filters package (see the README file in cups-filters).

Thu Sep 27 14:00:00 2012 mmeisterAATTsuse.com
- Version upgrade to 9.06. Mainly a bugfix release.

* pdfwrite announcements:
pdfwrite now supports the creation of PDF/A-2 files.
For further details see the NEWS file.

* removed moribund dumphint tool, see History9.htm and
http://bugs.ghostscript.com/show_bug.cgi?id=693223

Mon Sep 24 14:00:00 2012 idonmezAATTsuse.com
- \"export SUSE_ASNEEDED=0\" disables -Wl,--as-needed linker flags,
see http://bugs.ghostscript.com/show_bug.cgi?id=693100

Thu May 10 14:00:00 2012 jsmeixAATTsuse.de
- Require Ghostscript\'s font packages because the
Ghostscript package provides the \"Fontmap\" file
/usr/share/ghostscript//Resource/Init/Fontmap.GS
which lists Ghostscript\'s fonts but the fonts itself
are provided in the separated packages ghostscript-fonts-std
and ghostscript-fonts-other so that a RPM requirement
is needed to make sure that Ghostscript has its fonts.
- Extract the catalog of devices which are actually built-in
in exactly this Ghostscript and provide it as catalog.devices
in the Ghostscript package.

Fri Apr 27 14:00:00 2012 jsmeixAATTsuse.de
- BuildRequires dbus-1-devel for \"configure --enable-dbus\"
to have colord support in gstoraster (see the entry regarding
\"color management daemon\" in doc/History9.htm).

Tue Apr 24 14:00:00 2012 jsmeixAATTsuse.de
- Install documentation which is not installed by default
(LICENSE doc/AUTHORS doc/COPYING doc/thirdparty.htm
doc/WhatIsGS.htm doc/GS9_Color_Management.pdf
doc/gs-vms.hlp doc/Ps2ps2.htm).
- Add a link from SUSE\'s usual documentation directory
(/usr/share/doc/packages/ghostscript/) to Ghostscript\'s
documentation directory (/usr/share/ghostscript/9.05/doc/)
because \"configure --docdir=...\" does not work.

Thu Apr 5 14:00:00 2012 jsmeixAATTsuse.de
- Removed BuildRequires docbook-toys which is not needed
(db2ps and db2pdf called in ijs/Makefile.am to make ijs_spec.ps
and ijs_spec.pdf but neither of them is made - both are
provided in the sources) but docbook-toys pulls in packages
like texlive-bin-jadetex and texlive-jadetex which needlessly
blow up the build system.

Wed Mar 28 14:00:00 2012 jsmeixAATTsuse.de
- Require the basic fonts for Ghostscript
(package ghostscript-fonts-std) and recommend the
optional fonts (package ghostscript-fonts-other).

Fri Mar 23 13:00:00 2012 jsmeixAATTsuse.de
- Cleaned up BuildRequires.
- Added ghostscript-mini.spec with minimal BuildRequires.
- Explicitly specify configure --with-
* versus --without-
*
in ghostscript.spec versus ghostscript-mini.spec
to make the differences clear.

Fri Mar 16 13:00:00 2012 jsmeixAATTsuse.de
- Unfortunately ghostscript-library.spec and ghostscript-mini.spec
have unversioned \"Provides: ghostscript\" and for RPM this means
that both ghostscript-library and ghostscript-mini
provide any version of ghostscript. Therefore any non-matching
version of ghostscript-library and ghostscript-mini fulfill
any RPM requirement for ghostscript in the ghostscript-x11
and ghostscript-devel sub-packages which is wrong.
Therefore explicit conflicts with ghostscript-library and
ghostscript-mini are specified in the ghostscript-x11
and ghostscript-devel sub-packages to avoid the mess.

Thu Mar 15 13:00:00 2012 jsmeixAATTsuse.de
- Configure --without-libpaper disables libpaper support
because SUSE does not have libpaper.

Thu Mar 15 13:00:00 2012 jsmeixAATTsuse.de
- Configure --without-jasper and --enable-openjpeg because
since Ghostscript 9.05 JasPer is deprecated and Ghostscript
now ships modified OpenJPEG sources for JPEG2000 decoding
(replacing JasPer). Performance, reliability and memory use
whilst decoding JPX streams are all improved. Accordingly
the BuildRequires libjasper-devel is removed.
- Configure --without-ufst and --without-luratech because
those are relevant to commercial releases only
which would require a commercial license.
- Added BuildRequires libtool which requires automake and
automake requires autoconf to fix build requirements
for openSUSE:Factory.

Fri Feb 24 13:00:00 2012 jsmeixAATTsuse.de
- Using fixed /usr/lib/cups/filter (no lib64) because CUPS
in the Printing project uses it in any case.

Fri Feb 24 13:00:00 2012 jsmeixAATTsuse.de
- Adapt RPM dependencies to what is actually used
in openSUSE:Factory (dated 22 Feb. 2012).

Thu Feb 16 13:00:00 2012 jsmeixAATTsuse.de
- Added RPM dependencies to make sure ghostscript-x11 and the
main-package have exact matching version-release because both
could have any kind of Ghostscript-internal dependencies.
This is only an approximation to have ghostscript-x11 and
the main-package from the same build where the main-package
and its sub-package have been made but currently there is
no clean way to specify a \'same build\' RPM dependency.
Therefore currently ghostscript-x11 and the main-package could
have same version-release but nevertheless come from different
projects/repositories (e.g. with different patches or
whatever kind of differences).

Wed Feb 15 13:00:00 2012 jsmeixAATTsuse.de
- Split files which require X11 stuff into a ghostscript-x11
sub-package (currently only /usr/lib/ghostscript/9.05/X11.so)
so that the ghostscript package can be installed without X11.

Thu Feb 9 13:00:00 2012 jsmeixAATTsuse.de
- Upgrade to version 9.05 (see bnc#735824):
New simple ink-coverage device (inkconv).
The ps2write device has a large number of improvements.
Fixes and improvements for the CUPS Raster output device
(in particular Ghostscript bug 691922 regarding color model).
Renamed the PXL CUPS filter from \"pstopxl\" to \"gstopxl\".
For details see the doc/News.htm file.
- Removed \"make cups\" and \"make cups-install\" from spec file
using \"configure ... --with-install-cups\" instead
(new since version 9.04, see \"configure --help\").

Tue Dec 13 13:00:00 2011 jwAATTsuse.com
- Upgrade to version 9.04 (see bnc#735824):
For details see the doc/News.htm file.
- Added \"make cups\" and \"make cups-install\" to spec file.

Tue Mar 15 13:00:00 2011 jsmeixAATTsuse.de
- Initial ghostscript package.