Changelog for wicked-0.6.15-9.3.x86_64.rpm :
Fri Jan 23 13:00:00 2015 mtAATTsuse.de
- version 0.6.15
- nanny: use ifindex to reference workers in managed devices
and hold worker references when starting fsm (bsc#904061)
- nanny: Always reference mdev\'s worker by ifindex (bsc#904061)
- nanny: register discovered devices only when ready (bsc#904061)
- events: query and update device name on events (bsc#904061)
- udev: verify netdev index and update name at start, disable
ready handling if udev is not used, e.g. in LXC (bug#904061)
- xml: don\'t require parent\'s control node in config (bsc#901517)
- wireless: use string dict entry for WIRELESS_AP/bssid (bsc#911315)
- extensions: fixed false errors from hostname update (bsc#910323)
- tuntap: typo fix causing to not set IFF_NO_PI flag
- fixed some memory leaks in client and dbus object code
- doc/ChangeLog: do not omit merge commits which contain bug refs

Fri Dec 19 13:00:00 2014 mtAATTsuse.de
- version 0.6.14
- client: fixed segfault in status (bsc#908554)
- bonding: add new/missed bonding options (bsc#905750)
- systemd: service ordering dependencies (bsc#895600,bsc#901337)

Mon Dec 8 13:00:00 2014 mtAATTsuse.de
- version 0.6.13
- sysctl: do not fail on read-only proc e.g. in LXC (bsc#904432)
- netlink: recover from netlink event socket errors and allow to
configure the event socket buffer sizes (bsc#905421)
- fixed some memory and a file descriptor leak
- bonding: add encap2+3 and 3+4 xmit-hash-policies (bsc#905750)
- client: apply suse ifcfg alias label (bsc#907683)
- netlink: retry on DUMP_INTR and AGAIN (bsc#904776)
- gcrypt: do not fail when wicked has been build using a newer
but compatible library than the currently used (bsc#906217)
- compat: use info level on unspecified ip (bsc#904903)
- compat: fix tap group node generation (bsc#904380)
- sit,ipip,gre: generate tunnel config on change (bsc#901402)
- fsm: always refresh worker on device-ready event and match only
ready devices against config workers (bsc#904061)
- fsm: perform tentative check on all started interfaces with
nanny (bsc#900951)

Fri Oct 10 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.6.12
- ethernet: Do not fail when ETHTOOL_GSET/SSET fails
(bnc#900401, bnc#900112)
- dbus: omit ethernet speed, duplex, autoneg properties if not
supported by the driver
- ethtool: independent ioctl requests are handled separately:
if one fails it does not stop the following ones
- wireless: request assosciation even if link was up; linkup
indicates assosciation, rather than explicit linkAssosciate
event (bnc#893665)
- bonding: ignore redundant slaves in configs with a warning
- fsm: Generate default config for children in existing relation
- compat: prefer /etc/hostname over /etc/HOSTNAME and warn about
missed global configs (bnc#887910)

Fri Sep 26 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.6.11
- client-state: Do not fail on parsing empty origin and uuid
(bnc#890084)
- hwaddr: change hwaddr only when valid (bnc#898622)
- ifup/ifstatus: no failure report on failed/deferred lease,
correctly OR grouped leas status (bnc#896188)
- ifup,ifreload: wait for all tentative addresses
- config: improved allowed update mask/defaults
- man: added startmode hotplug and use-nanny (bnc#896403),
- Introduce ifcfg-dhcp man page covering DHCLIENT and
DHCLIENT6 vars, remove template reference from ifup(8),
ifcfg-wireless(5), reference ifcfg-dhcp(5)
- README: updated / improved
- rpm: dbus policies as noreplace config (bnc#897775),
reload dbus in wicked-service post-install (bnc#897775)
- fsm: corrected device hierarchy structure print
- routes: generate routes also without IP (bnc#895219),
show a note about not matching routes (bnc#895219)
- ethernet: lower ethtool not supported messages to debugs

Fri Sep 19 14:00:00 2014 mtAATTsuse.de
- version 0.6.10
- ifconfig: apply address lease priorities same as for routes
to dhcp6 to takeover addresses from guessed lower-priority
leases e.g. after restart and adjust lifetime on renewal.
- routes: lookup and accept custom table names defined in the
/etc/iproute2/rt_tables file and set forgotten route table
netlink attibute if provided by the kernel (bnc#885007).
- ethernet: do not fail when some ethtool operation is not
supported (bnc#897264)
- fsm: add link-masterdev relation when all dependencies are
already created and detect existing/conflicting masterdev
references.

Wed Sep 17 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.6.9
- ifstatus: address status reporting improvements, adding --verbose
parameter
- addrconf: correctly fetch lease info flags, disarmed old auto6
code, added prerequires (bnc#894885)
- fsm: Do not destroy schema requirements on rearm
- ipv6: added accept-ra sysctl support, auto6 code clean-up
- ifconfig: fixed lease updater allocation

Tue Sep 16 14:00:00 2014 mtAATTsuse.de
- version 0.6.8
- ifup,reload,status: return setup-in-progress code,
fix exit code override when systemd in picture and
disable pulling device status from addresses
- ifstatus: report slaves device as enslaved
- fixed to not reset master device name on success
- lower printout of debug messages (bnc#891036)
- nanny: correctly initialize timeout variable to
busy wait instead to wasting cpu using poll with
a 0 timeout (bnc#895970)

Wed Sep 10 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.6.7
- config: fixed optional include attribute parsing bug introduced
in version 0.6.6 and causing wicked to fail while config parsing.
- util: install signal handlers only once

Tue Sep 9 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.6.6
- Add wake-on-lan support (bnc#869114)
- ifconfig: delete address first if address differs (bnc#890406)
- config: support a local.xml file, clean-up of config file syntax
- man page wicked-config.5 update
- Clean-up and removing unused functions

Fri Sep 5 14:00:00 2014 mtAATTsuse.de
- version 0.6.5
- nanny: fixed to reset on rearm and to hotplug bonding slaves
(bnc#884012,bnc#880515)

Wed Sep 3 14:00:00 2014 mtAATTsuse.de
- version 0.6.4
- dhcp6: changed --test to request in auto mode, recheck RA
and try to start on new device-change events (bnc#889981)
- address: enable events in wickedd and expose flags to make
them visible and up-to-date in ifstatus (bnc#889981)
- nanny: reset/rearm on enable/disable, do not arm at all
when the use-nanny is false (bnc#891045)
- leases: intrinsic lease installation hook improvements as
preparation for PPPoE support (bnc#865573)
- dhcp4: do not release and remove lease without request
(DHCLIENT_RELEASE_BEFORE_QUIT), randomized startup delay
(DHCLIENT_SLEEP) if enabled, handle defer timeout to stop
client waiting at ifup (DHCLIENT_WAIT_AT_BOOT), rebind and
reboot state fixes (bnc#866994)

Mon Sep 1 14:00:00 2014 mtAATTsuse.de
- version 0.6.3
- client/nanny: lease handling/status fixes (partial bnc#891045),
do not fail when slave/port is missing (bnc#889666,bnc#890275)
- ifstatus: Do not check for config files (bnc#889666,bnc#890275)
- dhcp4: advance secs field for dhcpd min-secs (bnc#889314),
retransmit DHCP4 renewals enter reboot state with valid lease.
- ifevent: increase netlink socket recv buffer size (bnc#884012)
- ipv6: wait for addresses to become usable (bnc#882259)
- fixed completed sit/gre/ipip tunnel support
- dhcp6: initial defer handling and no-addr cleanup (bnc#891045)
- dhcp: apply suse ifcfg dhcp options (bnc#866994)
- ifup/reload: use default timeout if 0 (bnc#892486)

Mon Aug 18 14:00:00 2014 mtAATTsuse.de
- version 0.6.2
- nanny: disable nanny use by default again (bnc#891045)
- fsm: generate default configs for ports/slaves (bnc#889666)
- dbus: increase signal/default call timeouts (bnc#890084)
- dhcp4: pad dhcp4 packet to correct minimal len (bnc#882561)
- dhcp4: apply interface MTU provided by server (bnc#890230)

Wed Aug 6 14:00:00 2014 kmrozAATTsuse.com
- version 0.6.1
- nanny: Do not call link monitor on enable() (bnc#884012, bnc#890643)
- bridge,bond: Add only device-ready ports/slaves
- ifup,ifdown,ifreload: correct command status display messages
- fsm: Add new, free, clone functions for ifworker arrays
- client-state: Allow printing empty origin and UUID (bnc#890084)

Fri Aug 1 14:00:00 2014 mtAATTsue.de
- version 0.6.0
- client: added missed ifcfg remote-ip route match (bnc#889801)
- client: ifstatus/reload/up status reporting fixes (bnc#876845)
- client: calculate additional bridge STP timeouts (bnc#888323)
- nanny: do not use fsm default but infinite timeout (bnc#876845)
- nanny: save and load policies on restart to recover (bnc#876845)
- server: client configuration state load/save fixes (bnc#876845)
- ifconfig: fixed to close tun/tap device descriptor (bnc#889326)

Thu Jul 24 14:00:00 2014 mtAATTsuse.de
- version 0.5.38
- dhcp4: wait and discover if unable to rebind/reboot.
- ifreload: fixed to use nanny ifup flow when enabled,
fire nanny in down part, initial status info cleanup
(bnc#880515,bnc#884012)
- ifup/ifreload: apply wait-for-interfaces (bnc#888323)
- wickedd: fixed to process complete device state event
change transitions, avoiding manual refreshes breaking
them where possible (bnc#880515,bnc#884012)

Wed Jul 23 14:00:00 2014 mtAATTsuse.de
- version 0.5.37
- nanny: enabled nanny use for hotplugging (bnc#880515)
To disable again in case of trouble, edit /etc/wicked/common.xml
and set false, restart wickedd.service
and execute \"wicked ifup all\" to start the interfaces directly.
- ifdown: flush addrs and routes on device-down (bnc#885236)
- dhcp6: do not break ifdown if release fails (bnc#884012)
When the interface is not ready to send out a lease release,
commit the lease drop and notify wickedd, so ifdown goes on.
- ifup: update client-info and client-state on device-ready,
do not detect persistance but set if requested only (bnc#876845).

Mon Jul 21 14:00:00 2014 mtAATTsuse.de
- version 0.5.36
- ifup/nanny: refresh state data when address event arrives
to have complete lease data for status evaluation on timeout
(bnc#884012,bnc#876845)
- nanny: make policy application mechanism aware of children
dependency, fixed ifcondition child handling.
- ibft: enable ipv6, use sysfs prefix-len (bnc#887542)

Fri Jul 18 14:00:00 2014 mtAATTsuse.de
- version 0.5.35
- dhcp4: fix routes with gateway on other network than IP address
and use address class based netmask if it is missed (bnc#887586)
- route,address: check also gw address to set scope correctly and
omit sending a broadcast when equal to IP address (bnc#887586)
- ethtool: fix to set link speed, duplex and port options
- iflist: fix link type detection for tap devices (bnc#887564)
- ifup/reload: status reporting and complex device hierarchy fixes

Tue Jul 15 14:00:00 2014 mtAATTsuse.de
- version 0.5.34
- dhcp6: do not fail on read-only root-fs (bnc#885625)
- leases: fallback to statedir on read-only fs (bnc#885625)
- ifreload: hierarchy and multiple devices fixes
- ifreload: more diagnostic messages (bnc#882311)
- man: ifcfg(5) document update

Fri Jul 11 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.5.33
- capture: lower to debug on reconfig changes device type (bnc#880700)
- policy: add node for policy condition checking
- client: do not apply NULL config to nanny and segfault
- client: lowering log level of \"skipping\" messages
- server: lookup using link not the hwaddr type
- dhcp6: use RA prefix len if available (bnc#885234)
- iflist: fixed to use proper kind mapping, cleanup, refactoring
- fsm nanny: fix handling of DEVICE_DOWN event
- nanny: adapt recheck to handle hotplug devices
- nanny: schedule recheck on new device when policy exists
- nanny: Change managed and factory up functions
- nanny: Disable unnecessary schedule recheck calls
- nanny: Fix handlin DEVICE_CREATE and DEVICE_READY events
- fsm: ni_fsm_build_hierarchy destructive switch
- nanny: Trigger recheck on factory devices from create policy
- client: include and sort children using nanny
- fsm: Proper subclass and superclass check in ni_ifcondition_type()
- nanny: create workers and assign config from create policy
- nanny: Clear config.node on delete policy
- nanny: disable down operation for now
- dhcp4: fix link type comparison during device up events
- fsm: Move ni_ifup_pull_in_children to FSM
- client, nanny: Add policies first, enable successful devices
- lib: added netdev_ref_resolve utility, improved related

Fri Jul 4 14:00:00 2014 mtAATTsuse.de
- version 0.5.32
- client: fixed hierarchy building to consider ifup/ifdown separately,
improved verbosity debug and error messages (bnc#883203,bnc#884012)
- fsm: Do not fail completely on broken configuration (bnc#883203)
- fsm: wait for existing configuration workers (bnc#876855, bnc#880515)
- ifstatus: fixed to report status of requested interfaces only,
moved device-ready flag to ifflags to be visible in xml status.
- ifreload: correctly set ipv4 and ipv6 enable flags disabled before.
- service: replaced incorrect network-online.target wants dependency
with a WantedBy network-online.target dependency (bnc#883565)
- dhcp4,dhcp6: create storedir at tester start (bnc#885005)
- routes: apply ipv6 routes without device (bnc#882425)
- routes: fix to apply routes to device (bnc#883838)

Fri Jun 27 14:00:00 2014 mtAATTsuse.de
- version 0.5.31
- fsm: maintain shared_users in refresh lowerdev (bnc#883976)

Thu Jun 26 14:00:00 2014 mtAATTsuse.de
- version 0.5.30
- ifdown: rebuild hierarchy from lower and masterdev to stop
requested interfaces in their correct order (bnc#883976)
- config: added true switch, which
allows to test using nanny -- default is false.
- client: log exec commands and exit codes as debug
- client: initial merge of nanny ifup and ifdown
- nanny: initial merge of nanny fork changes
- rpm: removed obsolete pkgconfig(systemd), use unitdir
- library: fixed versioning of internal wicked lib

Wed Jun 25 14:00:00 2014 mtAATTsuse.de
- version 0.5.29
- dhcp4: recover lease, correctly build requests (bnc#881475)
- ipv4: fix duplicate address detection (bnc#881475)
- service: added network-online.target to wants (bnc#883565)
- ibft: fixed to generate proper static address node, no
static config with dhcp origin and to verify mac in ibft
nic selection as it may be for offload device (bnc#883712)
- client: if needed refresh worker in addressAcquired callback
- client: wicked xpath subcommand argument check
- doc: README and manual page updates (bnc#874609,bnc#880262)
- client: require directory in --ifconfig compat (bnc#881544)
- dhcp: show progress notifications (bnc#874609)

Tue Jun 3 14:00:00 2014 mtAATTsuse.de
- version 0.5.28
- client: avoid FSM refreshes and unsolicited state updates causing
to exit at assert, drop config origin and UUID on ifdown causing
ifreload to do nothing (bnc#876848,bnc#880664).

Wed May 28 14:00:00 2014 mtAATTsuse.de
- version 0.5.27
- server: do not apply multiple equal priority (merics) routes
to the same destination (bnc#879842)
- compat: pass DHCLIENT_ROUTE_PRIORITY suse ifcfg variable to
the backend allowing to set custom mertics on dhcp4 routes
(bnc#879842)
- dhcp4: set protocol dhcp hint to all routes, strip domain
when sending a hostname option to not break ddns updates
- hostname: reload syslog after change (bnc#874161)
- dbus: do not close shared connections (bnc#880124)
- ipv4: new default to send gratuitous arp
Consider new suse ifcfg variable default SEND_GRATUITOUS_ARP=auto
for arp-notify, enabling to send gratuitous arp by default, when
duplicate IPv4 check is enabled via arp-verify/CHECK_DUPLICATE_IP
and the check were successful (bnc#879911,fate#314399).

Thu May 22 14:00:00 2014 mtAATTsuse.de
- version 0.5.26
- rpm: rpm: drop useless ghost dirs in spec (bnc#873857)
- client: do not try to fire nanny in ifdown, it is not hired yet
We do not install nanny policies by default in ifup, so it is
not needed to try to delete them in ifdown. There is currently
no nanny started in inst-sys and the attempt is causing ifdown
to run into timeouts (bnc#876848,bnc#879127).
- client: wait for optional leases, just don\'t fail
When waiting for a group-optional lease pair (dhcp4 or dhcp6)
and one arrives, wait for the second one until timeout and
recheck the results then (bnc#876848,bnc#879127).
- dhcp6: fix reset and allocate message buffer in build to use
clean buffer in release messages sometimes having crap behind.

Mon May 19 14:00:00 2014 mtAATTsuse.de
- version 0.5.25
- server: no unrequested device-ready events (bnc#871135)
This bug caused e.g. bridges not going up from device-exists
even they already were in device-ready state before.
- client: do not mix shared with exlusive references (bnc#877776)
- ifconfig: do not fail on delete for vanished devices
- nanny: drop policies on ifdown, turn some errors to debug
- sysconfig: add WICKED_DEBUG and WICKED_LOG_LEVEL variables
to /etc/sysconfig/network/config.
- man: added ifcfg-{dummy,macvlan,macvtap,tunnel},ifroute,routes
ifsysctl and updated already existing manual pages.

Wed May 14 14:00:00 2014 mtAATTsuse.de
- version 0.5.24
- rpm: use _rundir rpm macro if defined (bnc#873857)

Wed May 14 14:00:00 2014 mtAATTsuse.de
- version 0.5.23
- fsm: added device-ready wait processing syncing at udev network
device rename events (bnc#871135)
- ifup: no timeout report on group-optional leases (bnc#875154)
- ifstatus: no failure report if peer lease is up (bnc#875154)
- tunnels: discover gre,sit,ipip tunnels (read-only for now)
- client/nanny: utilities to convert ifconfigs into policy
- client: compare fix to consider configs using ifindex [ibft]

Thu May 8 14:00:00 2014 mtAATTsuse.de
- version 0.5.22
- status: show only available leases and inclusive their uuid
- ifup, ifstatus: cond. accept STARTMODE off and manual
- ifstatus: fixed address indenting in verbose mode
- wireless: add missing wpa_supplicant intermediate states.
- wireless: clear secrets as soon as they are used
- dhcp4+dhcp6: apply config uuid to lease and offer early
- dhcp4: accept packets without udp checksum (bnc#873267)
- do not close stderr in daemon() when used in log-target
- client: do not report transient errors by default
(partial bnc#875154 fix)

Sun Apr 27 14:00:00 2014 mtAATTsuse.de
- version 0.5.21
- dhcp6: fix to allow supported devices (bnc#874561)
- dhcp,autoip: log unsupported devices debug1 level only

Thu Apr 17 14:00:00 2014 pwieczorkiewiczAATTsuse.com
- version 0.5.20
- autoip4,dhcp4,dhcp6: fixed to create instance for supported
devices only to save memory and avoid allocation complains due to
packet capturing init failure
- lldp: fix infinite loops in ni_lldp_agent_update,
disable built-in support (rejected fate#313671, bnc#873299)
- dhcp4: do not send hostname to server in discover (bnc#873267)
- rpm: explicit piddir,statedir,storedir in spec
- generate ChangeLog file from git while make dist

Mon Apr 14 14:00:00 2014 mtAATTsuse.de
- version 0.5.19
- server/nanny: do not fail on missed dbus objects or object
creation errors due to already deleted interfaces in the
kernel while processing the event (bnc#867806,bnc#871388)
- netlink: verify if device still exists on newlink events
- nanny: fixed endless loop on policies without name and user
control default, added device mach with identify capabilities

Fri Mar 28 13:00:00 2014 mtAATTsuse.de
- version 0.5.18
- dhcp4: enabled on infiniband / IPoIB links
- capture: fixed to wrap link-layer packet sockets as the default
address length in sockaddr_ll is not enough for infiniband.
- dhcp6: enabled on infiniband / IPoIB links

Fri Mar 28 13:00:00 2014 mtAATTsuse.de
- version 0.5.17
- dhcp4: fixed posix-tz-dbname code and added to parse
- dhcp4: renew lease via unicast (bnc#866993)
- macvtap: initial support (fate#315131)
- ifstatus: do not consider client-state in ifstatus
- xml: fixed functions retrieving numerical attr values
- config: generate v5 UUIDs (SHA1) from xml config content

Mon Mar 24 13:00:00 2014 mtAATTsuse.de
- version 0.5.16
- ipv6: catch ipv6.disable=1 kernel command line (bnc#869334)
- client: read and apply sysctl/ifsysctl files to consider
ipv4/ipv6 forwarding, enable (disable_ipv6), ipv6 autoconf
and privacy (use_tempaddr) sysctl options (bnc#869334)
- client: do not complain about missed /etc/HOSTNAME
- dhcp4: fixed decline message and processing (bnc#869150)
- dhcp4: check if lease exists while processing arp (bnc#869150)
- removed obsolete drop default route patch (bnc#868187)
[- 0001-addrconf-drop-default-route-if-disabled-bnc-868187.patch]

Mon Mar 17 13:00:00 2014 mtAATTsuse.de
- addrconf: drop default route if disabled (bnc#868187)
Honor a (per-interface) DHCLIENT_SET_DEFAULT_ROUTE=no in
suse ifcfg files and remove from lease before update runs.
[+ 0001-addrconf-drop-default-route-if-disabled-bnc-868187.patch]

Fri Mar 14 13:00:00 2014 mtAATTsuse.de
- version 0.5.15
- netlink: fixed masterdev reference name resolving bug
- bridge: lowered a questionable warning to debug
- added dummy interface support inclusive suse compat
- added tun/tap interface support inclusive suse compat
- netlink: fixed address parsing causing an abort on assert
- arp: verify ipv4 addresses by default (fate#314399)
- Enabled arp duplicate check for static ipv4 addresses as
default (RFC 5227) and send arp notify when requested in
suse ifcfg variables CHECK_DUPLICATE_IP(default yes) and
SEND_GRATUITOUS_ARP(default no).
- ipv6: corrected to apply inverted ipv6.enable flag
- utils: fixed array remove typo and socket array activate
- utils: use proper index in ni_string_array_remove
- utils: properly adjust array in remove actions
- socket: use proper array in socket array activate

Thu Mar 6 13:00:00 2014 mtAATTsuse.de
- rpm: added sysconfig-netconfig require to wicked (bnc#867078)
- service: use explicit before/after ordering in all service
files (bnc#866732)

Wed Mar 5 13:00:00 2014 mtAATTsuse.de
- bridge: fixed to set port link up (bnc#866860), also if they\'re
already part of the bridge (bnc#862530 regression).
- dhcp: bring link up if not yet up and wait until it is ready in
- -test mode (used in network-autoconfig and dracut) instead to
complain and exit because link is not ready yet (bnc#866617).

Tue Mar 4 13:00:00 2014 mtAATTsuse.de
- state: fixed a state-dir creation race condition (bnc#866757)

Fri Feb 28 13:00:00 2014 mtAATTsuse.de
- version 0.5.14
- util: fix ni_uuid_parse() and support 8-4-4-4-12 format only

Thu Feb 27 13:00:00 2014 mtAATTsuse.de
- version 0.5.13
- bridge: do not require link-up on ports (bnc#862530)
- bonding: try to enslave into bond using netlink
- extensions: disabled writting of wickedd.log (debug) file
- addrconf: avoid unwanted updates, update flag fixes (bnc#865325)
- compat: blacklist all and default interface names
- leaseinfo: fixed typo in BOOTSERVERNAME variable
- compat: read all suse ifcfg files and init timeout
- compat: allow backends return complete config
- client: exclude STARTMODE=\'manual\' interfaces in ifup all
and ignore interfaces with STARTMODE=\'off\' (bnc#864444)
- temporarily disable modem init from system
- disable wicked-devel subpackage to avoid wrong expectations
- nanny: do not update and client-state> by default

Fri Feb 21 13:00:00 2014 mtAATTsue.de
- version 0.5.12
- wicked-devel: require libnl3-devel unconditionally

Fri Feb 21 13:00:00 2014 mtAATTsuse.de
- version 0.5.11
- wicked-devel: require libnl3-devel used for build in spec

Fri Feb 21 13:00:00 2014 mtAATTsuse.de
- version 0.5.10
- service: fix rpmlink suse-missing-rclink warnings
- compat: no systemd check via mountpoint in ifup (bnc#864696)

Thu Feb 20 13:00:00 2014 mtAATTsuse.de
- version 0.5.9
- dhcp4: fixed to commit and inform wicked when a lease is
released lease - this may have cause ifdown errors.
- client: workaround to consider wait-for-interfaces
Get the WAIT_FOR_INTERFACES variable from environment, which is
sourced in the service file to not timeout too early and also
allow the users to increase it (see bnc#863371, bnc#862530).
- addconf: update allow static lease to update resolver
This is required for iBFT leases and solves bnc#864131.
- iflist: check validity before extracting nla payload (bnc#863371)
- Update unquote to handle invalid sysconfig variables properly
(bnc#864635)
- dhcp: added lease-xml output to dhcp --test mode and option
to request lease in dry-run mode (get lease and exit)
- client: turn \"No valid config files found\" into a debug msg
- infiniband: start after rdma service not openibd (sles-11)
- compat: fixed scripts/ifup -o debug handling
- daemons: disabled state.xml saving by default (bnc#862335)
- client: check for config priorities at reading stage
- client: add --raw parameter to the convert option
- wickedd: add sock->release_user_data and use in in process.c,
clear temp-state files in ni_dbus_xml_deserialize_arguments.

Thu Feb 13 13:00:00 2014 mtAATTsuse.de
- version 0.5.8
- updater: reverse resolve ip address if dhcp server does not
provide a hostname (bnc#861476).
- debug: init debug and log level from environment using DEBUG,
WICKED_DEBUG= and WICKED_LOG_LEVEL= variables.
- dhcp4: check link before start, confirm lease on link change
and do not discard lease if host does not match
- dhcp4: modprobe af_packet, omit arp validation when address
already set on link.
- dhcp6: start when link + link-address ready, not network up
- dhcp: provide addrconf lease and leaseinfo details
- leaseinfo: consistently use prefixlen in ROUTES
- wireless: do not remove link/network up flags (bnc#863371)
- libwicked: libtool -version-info making package and library
versions independent.
- cleaned up unused schema files and extensions scripts
- lldp: do not log error when lldp is not supported (bnc#862790)
- ibft: fixed reading of the origin field
- iftypes: show s390 ctcm and iucv (slip) devices, not unknown

Wed Feb 5 13:00:00 2014 mtAATTsuse.com
- version 0.5.7
- dhcp: request and set hostname and other options (bnc#861476),
- dhcp: accept dns-domain name option containing a domain list
as compatibility abuse of this option and log it (bnc#862130)
- ibft: always modprobe iscsi_ibft when not yet loaded, added
list-only mode and workaround missed readlink utility.
- dbus: Fix crashes when dbus instance not running
- leaseinfo: fix accidental closure of file descriptor argument
- client: improve initialization of client-state structure
- compat: apply ethtool and lladdr options from ifcfg variable
- set link-address (mac) for ethernet,vlan,macvlan devices
- do not set mtu or link-address when device is up as this
tends to fail or break upper [vlan, ...] devices
- limit mtu of upper (vlan) devices to the mtu of lower (eth)
- addrconf: initial lease writting/parsing helpers / disarmed
- Disable modem support for now, new ModemManage API (bnc#859888)
- dhcp: fixed byteswap in ipudp_checksum and checksum_partial
- leaseinfo: include prefixlen in IPADDR same as in ifcfg files

Thu Jan 23 13:00:00 2014 mtAATTsuse.com
- version 0.5.6
- fixed to free details in compat netdev and lease destroy.
- systemd: removed requisite=wickedd from wicked.service
This dependency triggered an automatic wicked.service (network)
restart, when the wickedd.service is restarted (bnc#859801).
- client: enable compat suse only, install ifcfg-lo
- client: initial ifcfg support for macvlan, fixed flags
and lower-device dependencies in the schema (fate#315131)
- client: Changing ifcheck to be more robust

Fri Jan 17 13:00:00 2014 mtAATTsuse.com
- version 0.5.5
- systemd: added Restart=on-abort to wickedd
* (fate#315133)
- client: implemented ifreload and adopted services (fate#309018)
- client: use fsm to consider config in ifstatus, exit code rework
and refactoring to implement check utilities for ifstatus+reload
- client: updated copyright and license statements

Fri Jan 10 13:00:00 2014 mtAATTsuse.com
- Added rpm obsoletes sysconfig-network to wicked-service.

Thu Jan 9 13:00:00 2014 mtAATTsuse.com
- version 0.5.4
- spec: require wicked-service package in wicked
Fixed spec file to require the wicked-service package
in wicked package under systemd. The wicked-service
package provides systemd service files as well as the
ifup compatibility scripts (bnc#856591,fate#316768).
- Documentation: man pages update, provide also ifcfg
*
and ifup,ifdown,ifstatus man pages (bnc#855135).
- systemd services: added --systemd parameters which
enable systemd specific behaviour tweaks.
- initial wicked ifstatus command, ifstatus and ifprobe
compat scripts used and in the network init-script
on sysvinit systems (only, not under systemd).
- cleanup to use LSB codes in client and all daemons
- client: Add --delete and --no-delete options
- nanny: enable wickedd-nanny service by default
- Refactored to use same link.lowerdev name/index
reference in vlan,macvlan,infiniband and show
master device interface property in show-xml.
- infiniband schema: changed to use
for infiniband child interfaces in native configs.
- fixed newlink functions to not free netdev on discard

Fri Dec 6 13:00:00 2013 mtAATTsuse.com
- version 0.5.3
- cleaned up to not install unused wickedAATT.service example
- wickedd: added shutdownDevice method to ifdown transition from
up to exists, used in bond/bridge to release slaves/ports.
- cleaned up internal iftype vs. arptype mappings and handling
- client: ifdown deletes the devices created by ifup
- configure: added rtnetlink,dcbnl,if_link checks
- macvlan: initial support, no ifcfg yet (fate#315131)
- wireless: do not scan and bind supplicant by default,
corrected the schema to use proper auth-methods type
- socket: handle hangup after input, but before output
- added refcounting for ni_dbus_watch_data_t objects
- bonding: fixed bonding slave duplicate checks
- client: add client-state including a persistent mode
to skip ifdown for important interfaces by default
- client: ifup --persistent and ifdown --force options
- several lldp fixes, mostly for parsing / formating
- logging: added timestamp option to stderr --log-target
- extensions/updater: get and set NIS settings from lease
- extensions: replace resolver with new generic updater
using simple netconfig key-value leaseinfo dump files
- dhcp4: initial --test implementation (fate#316111)
- dhcp6: initial --test implementation (fate#316111)
- dhcp6: fixed to accept low preference server offers
- dhcp4: set fsm state before building the message
- dhcp4: don\'t use offered address in initial request
- netlink: diverse error/return code handling fixes
- netlink: switched from libnl1 to libnl3
- moved TODO file content into individual github issues

Wed Oct 2 14:00:00 2013 mtAATTsuse.com
- version 0.5.2
- added activation comment to the spec file (bnc#843526)
- fixed to not fail on config dirs without any config file

Fri Sep 27 14:00:00 2013 mtAATTsuse.com
- version 0.5.1
- rpmlintrc: removed obsolete content (bnc#783932#c18)
- added extension to update hostname from [dhcp] lease
- refactored config read and added wicked show-config
- corrected & documented --log-target destination parsing
- fixed signed char issues in xml_escape_entities
- fail when the global --config path gets rejected

Wed Sep 18 14:00:00 2013 mtAATTsuse.com
- Applied obs adjustments and copyright comment to spec file
- wicked ifdown: enable action waiting before calling methods
- wicked show: create client object and handle ifname argument
- wicked ifup: parse ifcfg static addrconf even without IPADDR
- disabled unfinished code to avoid errors / warnings about

Mon Sep 16 14:00:00 2013 mtAATTsuse.com
- Initial candidate package for openSUSE:Factory