Changelog for rsyslog-mmjsonparse-8.40.0-3.1.x86_64.rpm :
Thu Nov 23 13:00:00 2017 rbrownAATTsuse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)

Fri Nov 17 13:00:00 2017 astiegerAATTsuse.com
- Ensure user \"news\" exists - bsc#1068678

Tue Nov 14 13:00:00 2017 astiegerAATTsuse.com
- rsyslog 8.30.0

* changed behaviour: all variables are now case-insensitive by default

* core: handle (JSON) variables in case-insensitive way

* imjournal: made switching to persistent journal in runtime possible

* mmanon: complete refactor and enhancements

* imfile: add \"fileoffset\" metadata

* RainerScript: add ltrim and rtrim functions

* core: report module name when suspending action

* core: add ability to limit number of error messages going to stderr

* tcpsrv subsystem: improvate clarity of some error messages

* imptcp: include module name in error msg

* imtcp: include module name in error msg

* tls improvement: better error message if certificate file cannot be read

* omfwd: slightly improved error messages during config parsing

* ommysql improvements

* ommysql bugfix: do not duplicate entries on failed transaction

* imtcp bugfix: parameter priorityString was ignored

* template/bugfix: invalid template option conflict detection

* core/actions: fix handling of data-induced errors

* core/action bugfix: no \"action suspended\" message during retry processing

* core/ratelimit bugfix: race can lead to segfault

* core bugfix: rsyslog aborts if errmsg is generated in early startup

* core bugfix: informational messages was logged with error severity

* core bugfix: --enable-debugless build was broken

* queue bugfix: file write error message was incorrect

* omrelp bugfix: segfault when rebindinterval parameter is used

* omkafka bugfix: invalid load of failedmsg file on startup if disabled

* kafka bugfix: problem on invalid kafka configuration values

* imudp bugfix: UDP oversize message not properly handled

* core bugfix: memory corruption during configuration parsing

* core bugfix: race on worker thread termination during shutdown

* omelasticsearch: avoid ES5 warnings while sending json in bulkmode

* omelasticsearch bugfix: incompatibility with newer ElasticSearch version

* imptcp bugfix: invalid mutex addressing on some platforms

* imptcp bugfix: do not accept missing port in legacy listener definition
- build requirements:

* libfastjson 0.99.7 is now mandatory

* libsystemd-journal >= 234 is now recommended
- packaging:

* add upstream build fix 0001-imgssapi-fix-compiler-warnings.patch

Tue Aug 8 14:00:00 2017 astiegerAATTsuse.com
- rsyslog 8.29.0:

* imptcp: add experimental parameter \"multiline\"

* imptcp: framing-related error messages now also indicate remote peer

* imtcp: framing-related error messages now also indicate remote peer

* imptcp: add session statistics conunter

* imtcp: add ability to specify GnuTLS priority string

* impstats: add new ressoure counter \"openfiles\"

* pmnormalize: new parser module

* core/queue: provide informational messages on thread startup and shutdown

* omfwd/udp: improve error reporting, depricate maxerrormessages parameter

* core: add parameters debug.file and debug.whitelist

* core/net.c: improve UDP socket creation error messages

* omfwd/udp: add \"udp.sendbuf\" parameter

* core: make rsyslog internal message rate-limiter configurable

* omelasticsearch bugfixes and changed ES5 API support
+ avoid 404 during health check
+ avoid ES5 warnings while sending json
+ bugfix for memomry leak while writing error file

* imfile bugfix: wildcard detection issue on path wildcards

* omfwd bugfix: always give reason for suspension

* omfwd bugfix: configured compression level was not properly used

* imptcp bugfix: potential socket leak on session shutdown

* omfwd/omudpspoof bugfix: switch udp client sockets to nonblocking mode

* imklog: fix permitnonkernelfacility not working

* impstats bugfix: impstats does not handle HUP

* core bugfix: segfault after configuration errors

* core/queue bugfixes

* lmsig_ksi: removed pre-KSI_LS12 components

Sun Jul 30 14:00:00 2017 michaelAATTstroeder.com
Version 8.28.0 [v8-stable] 2017-06-27

* omfwd: add parameter \"tcp_frameDelimiter\"

* omkafka: large refactor of kafka subsystem

* imfile: improved handling of atomically renamed file (w/ wildcards)

* imfile: add capability to truncate oversize messages or split into multiple

* mmdblookup fixes and extensions

* bugfix: fixed multiple memory leaks

* imptcp: add new parameter \"flowControl\"

* imrelp: add \"maxDataSize\" config parameter

* multiple modules: gtls: improve error if certificate file can\'t be opened

* omsnare: allow different tab escapes

* omelasticsearch: converted to use libfastjson instead of json-c

* imjournal: _PID fallback

* added fallback for _PID proprety when SYSLOG_PID is not available

* introduced new option \"usepid\" which sets which property should
rsyslog use, it has 3 states system|syslog|both, default is both

* deprecated \"usepidfromsystem\" option, still can be used
and override the \"usepid\"

* it is possible to revert previous default with usepid=\"syslog\"

* multiple modules: add better error messages when regcomp is failing

* omhiredis: fix build warnings

* imfile bugfix: files mv-ed in into directory were not handled

* omprog bugfix: execve() incorrectly called

* imfile bugfix: multiline timeout did not work if state file exists

* lmsig_ksi-ls12 bugfix: build problems on some platforms

* core bugfix: invalid object type assertion

* regression fix: local hostname was not always detected properly...

* bugfix: format security issues in zmq3 modules (bsc#1051798)

* bugfix build system: add libksi only to those binaries that need it

* bugfix KSI ls12 components: invalid tree height calculation

Mon Jun 5 14:00:00 2017 tchvatalAATTsuse.com
- Drop module-guardtime package

* Upstream libgt died and it does not work with new openssl

Thu May 18 14:00:00 2017 dziolkowskiAATTsuse.com
Version 8.27.0 [v8-stable] 2017-05-16
- imkafka: add module
- imptcp enhancements:

* optionally emit an error message if incoming messages are truncated

* optionally emit connection tracking message (on connection create and
close)

* add \"maxFrameSize\" parameter to specify the maximum size permitted
in octet-counted mode

* add parameter \"discardTruncatedMsg\" to permit truncation of
oversize messages

* improve octect-counted mode detection: if the octet count is larger
then the set frame size (or overly large in general), it is now
assumed that octet-stuffing mode is used. This probably solves a
number of issues seen in real deployments.
- imtcp enhancements:

* add parameter \"discardTruncatedMsg\" to permit truncation of
oversize messages

* add \"maxFrameSize\" parameter to specify the maximum size permitted
in octet-counted mode
- imfile bugfix: \"file not found error\" repeatedly being reported
for configured non-existing file. In polling mode, this message
appeared once in each polling cycle, causing a potentially very large
amout of error messages. Note that they were usually emitted too
infrequently to trigger the error message rate limiter, albeit often
enough to be a major annoance.
- imfile: in inotify mode, add error message if configured file cannot
be found
- imfile: add parameter \"fileNotFoundError\" to optinally disable
\"file not found\" error messages
- core: replaced gethostbyname() with getaddrinfo() call
Gethostbyname() is generally considered obsolete, is not reentrant and
cannot really work with IPv6. Changed the only place in rsyslog where
this call remained.
Thanks to github user jvymazal for the patch
- omkafka: add \"origin\" field to stats output
See also https://github.com/rsyslog/rsyslog/issues/1508
Thanks to Yury Bushmelev for providing the patch.
- imuxsock: rate-limiting also uses process name
both for the actual limit procesing as well as warning messages emitted
see also https://github.com/rsyslog/rsyslog/pull/1520
Thanks to github user jvymazal for the patch
- Added new module: KSI log signing ver. 1.2 (lmsig_ksi_ls12)
- rsylsog base functionality now builds on osx (Mac)
Thanks to github user hdatma for his help in getting this done.
- build now works on solaris again
- imfile: fix cross-platform build issue
see also https://github.com/rsyslog/rsyslog/issues/1494
Thanks to Felix Janda for bug report and solution suggestion.
- bugfix core: segfault when no parser could parse message

Thu Apr 6 14:00:00 2017 astiegerAATTsuse.com
- rsyslog 8.26.0:

* liblognorm 2.0.3 is required for mmnormalize

* enable internal error messages at all times

* core: added logging name of source of rate-limited messages

* omfwd: omfwd: add support for network namespaces

* imrelp: honor input name if provided when submitting to impstats

* imptcp: add ability to set owner/group/access perms for uds

* mmnormalize: add ability to load a rulebase from action() parameter

* pmrfc3164 improvements
+ permit to ignore leading space in MSG
+ permit to use at-sign in host names
+ permit to require tag to end in colon

* add new global parameter \"umask\"

* core: make use of -T command line option more secure

* omfile: add error if both file and dynafile are set

* bugfix: build problem on MacOS (not a supported platform)

* regression fix: in 8.25, str2num() returned error on empty string

* bugfix omsnmp: improper handling of new-style configuration parameters

* bugfix: rsyslog identifies itself as \"liblogging-stdlog\" in internal messages

* bugfix imfile: wrong files were monitored when using multiple imfile inputs

* bugfix: setting net.aclResolveHostname/net.acladdhostnameonfail segfaults

* bugfix: immark emitted error messages with text \"imuxsock\"

* bugfix tcpflood: build failed if RELP was disabled

* fix gcc6 compiler warnings

* the output module array passing interface has been removed

Mon Mar 6 13:00:00 2017 astiegerAATTsuse.com
- use 8.25.0 documentation tarball

Thu Feb 23 13:00:00 2017 astiegerAATTsuse.com
- rsyslog 8.25.0:

* imfile: add support for wildcards in directory names

* add new global option \"parser.PermitSlashInProgramname\"

* mmdblookup: fix build issues, code cleanup

* improved debug output for queue corruption cases

* an error message is now displayed when a directory owner cannot be set

* rainerscript: add new function ipv42num

* rainerscript: add new function num2ipv4

* bugfix: ratelimiter does not work correctly is time is set back

* core: fix potential message loss in old-style transactional interface

* bugfix queue subsystem: queue corrupted if certain msg props are used

* bugfix imjournal: fixed situation when time goes backwards

* bugfix: bFlushOnTxEnd == 0 not honored when writing w/o async writer

* bugfix core: str2num mishandling empty strings

* bugfix rainerscript: set/unset statement do not check variable name validity

* bugfix mmrm1stspace: last character of rawmsg property was doubled

* bugfix imtcp: fix very small (cosmetic) memory leak

* However, the leak breaks memleak checks in the testbench.

Fri Feb 10 13:00:00 2017 ndasAATTsuse.com
- sync bug and fate numbers from IBS changes.

Sun Jan 15 13:00:00 2017 astiegerAATTsuse.com
- rsyslog 8.24.0(fate#320546):

* mmrm1stspace: new module; removes first space in MSG if present

* KSI signature provider: file permissions can now be specified

* omzmq: new features

* when the hostname is empty, we now use \"localhost-empty-hostname\"

* omelasticsearch: remove \"asyncrepl\" config parameter

* omfwd: Add support for bind-to-device (see below on same for imudp)

* imudp: Add support for bind-to-device

* imudp: limit rcvbufsize parameter to max 1GiB

* rainerscript: implement new \"call_indirect\" statement

* bugfix imjournal: make state file handling more robust

* bugfix core: lookup table reload was not properly integrated

* bugfix core: potential dealock on shutdown

* bugfix ommongodb: did not work in v8 due to invalid indirection

* bugfix ommongodb: fix tryResume handling

* bugfix omfwd: retry processing was not done correctly, could stall

* bugfix imuxsock: segfault non shutdown when $OmitLocalLogging is on
- contributed modules not enabled due to build issues:

* mmdblookup: new maxminddb lookup message modify plugin

Mon Dec 12 13:00:00 2016 dimstarAATTopensuse.org
- Replace pkgconfig(libsystemd-journal) BuildRequires with
pkgconfig(libsystemd): the sub-libraries have been merged into
libsystemd since 209 and have ultimately been removed since 230.

Sun Dec 4 13:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.23.0:

* requiring libfastjson 0.99.3

* KSI signatures: removed SHA2-224 hash algorithm

* imfile: new timeout feature for multi-line reads

* omfile: improve robustness against network file system failures

* pmaixforwardedfrom: support for AIX syslogd -s option

* omelasticsearch: add ability to specify max http request size

* omelasticsearch: high availability addressing of ElasticSearch cluster

* omelasticsearch: make compatible with ElasticSearch 2.x and 5.x

* omhiredis: add dynakey attribute.

* omtcl: new contributed module

* RainerScript: provide a capability to set environment variables

* lookup tables: improved error checking

* queue subsystem: add configuration parameter \"queue.samplinginterval\"

* various bug fixes

* rsgtutil: option to specify KSI publications file certificate constraints
- includes changes from 8.22.0:

* ompgsql: add template support

* generate somewhat better error message on config file syntax error
- includes changes from 8.21.0:

* CHANGE OF BEHAVIOUR:
by default, internal messages are no longer logged via the internal
bridge to rsyslog but via the syslog() API call [either directly or
via liblogging). For the typical single-rsyslogd-instance installation this
is mostly unnoticable (except for some additional latency). If multiple
instances are run, only the \"main\" (the one processing system log messages)
will see all messages. To return to the old behaviour, do either of those
two:
1) add in rsyslog.conf:
global(processInternalMessages=\"on\")
2) export the environment variable RSYSLOG_DFLT_LOG_INTERNAL=1
This will set a new default - the value can still be overwritten via
rsyslog.conf (method 1). Note that the environment variable must be
set in your
*
*startup script
*
*.
For more information, please visit
http://www.rsyslog.com/rsyslog-error-reporting-improved/

* slightly improved TLS syslog error messages

* queue subsystem: improved robustness

Tue Jul 19 14:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.20.0:

* omrelp: add configurable connection timeout

* pmrfc3164: add support for slashes in hostname

* bugfix omfile: handle chown() failure correctly

* omfile now better conveys status of unwritable files back to core

* config files recursively including themselfes are now detected

* refactored code to not emit compiler warnings in \"strict mode\"

* bugfix: fix some issues with action CommitTransaction() handling

* bugfix omqmqp1: connecting to the message bus fails on nonstandard port

* testbench/CI enhancements
- Build requirements:

* librelp 1.2.12

Sat Jun 4 14:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.19.0:

* omelasticsearch: add option to permit unsigned certs

* imrelp: better error codes on unvailablity of TLS options

* default stack size for inputs has been explicitely set to 4MiB

* performance improvements

* miscellaneous minor cleanup

* fix: potential misadressing in template config processing

* bugfix omfile: async output file writing does not respect
flushing

* bugfix imfile: corrupted multi-line message when state data was
persisted

* bugfix imfile: missing newline after first line of multiline
message

* bugfix: dynstats unusedMetricTtl bug

* bugfix build system: build was broken on SunOS

* bugfix: afterRun entry point not correctly called

* bugfix dynstats: do not leak file handles

* bugfix omelasticsearch: disable libCURL signal handling

* bugfix omelasticsearc: some regressions were fixed

* improved wording: gnutls error message points to potential
cause

Tue Apr 19 14:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.18.0(bnc#958728):

* templates: add option to convert timestamps to UTC

* omjournal: fix segfault (regression in 8.17.0)

* imptcp: added AF_UNIX support

* new template options

* compressSpace

* date-utc

* redis: support for authentication

* omkafka: makes kafka-producer on-HUP restart optional

* imfile: new \"FreshStartTail\" input parameter

* omjournal: fix libfastjson API issues

* ommongodb: fix json API issues

* dynamic stats subsystem: a couple of smaller changes

* foreach loop: now also iterates over objects (not just arrays)

* enhancement: queue subsystem is more robst in regard to some corruptions

* enhancement: Allow rsyslog to bind UDP ports even w/out specific
interface being up at the moment.

* new External plugin for sending metrics to SPM Monitoring SaaS

* bugfix imfile: fix memory corruption bug when appending AATTcee

* bugfix: memory misallocation if position.from and position.to is used
a negative amount of memory is tried to be allocated if position.from
is smaller than the buffer size (at least with json variables). This
usually leads to a segfault.

* bugfix: fix potential memleak in TCP allowed sender definition

* bugfix: $PrivDropToGroupID actually did a name lookup

* bugfix: small memory leak in imfile

* bugfix: double free in jsonmesg template

* bugfix: incorrect formatting of stats when CEE/Json format is used

* bugfix omfwd: new-style keepalive action parameters did not work
due to being inconsistently spelled inside the code. Note that legacy
parameters $keepalive... always worked

* bugfix: memory leaks in logctl utility

* bugfix omrelp: fix segfault if no port action parameter was given

* bugfix imtcp: Messages not terminated by a NL were discarded

Sun Mar 13 13:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.17.0:

* improve json variable performance

* new experimental feature: lookup table suport

* new feature: dynamic statistics counters

* new contributed plugin: omampq1 for AMQP 1.0-compliant brokers

* new set of UTC-based $now family of variables ($now-utc, $year-utc, ...)

* simplified locking when accessing message and local variables

* new global parameter \"debug.unloadModules\"

* timestamp handling: guard against invalid dates

* imfile: add \"trimlineoverbytes\" input paramter

* ommongodb: add support for extended json format for dates

* omjournal: add support for templates

* imuxsock: add \"ruleset\" input parameter(fate#320667)

* imptcp: performance improvements

* improve interface definition in some modules, e.g. mmanon, mmsequence

* rsgtutil: dump mode improvements
+ auto-detect signature file type
+ ability to dump hash chains for log extraction files

* bugfix: unixtimestamp date format was incorrectly computed (leap year)

* bugfix: date-ordinal date format was incorrectly computed (leap year)

* bugfix: some race when shutting down input module threads

* bugfix tcpflood: did not handle connection drops correct in TLS case

* bugfix: abort if global parameter value was wrong

* bugfix omkafka: fix potential NULL pointer addressing

* bugfix impstats: AATTcee cookie was prefixed to wrong fromat (json vs. cee)

* bugfix imfile: fix race during startup that could lead to some duplication

* bugfix: potential loss of single message at queue shutdown

* bugfix: potential deadlock with heavy variable access

* bugfix ommysql: on some platforms, serverport parameter had no effect

* bugfix omelasticsearch: invalid pointer dereference

* bugfix omhiredis: serverport config parameter did not reliably work

* bugfix rsgtutil: -h command line option did not work

* bugfix lexer: hex numbers were not properly represented

* bugfix TLS syslog: intermittent errors while sending data

* bugfix imfile: abort on startup if no slash was present in file name param

* bugfix rsgtutil: fixed abort when using short command line options

* bugfix rsgtutil: invalid computation of log record extraction file

* bugfix build system: KSI components could only be build if in default path

Mon Feb 1 13:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.16.0:

* rsgtutil: Added extraction support including loglines and hash
chains.

* new system properties for $NOW properties based on UTC

* various bug fixes and improvements

Thu Jan 28 13:00:00 2016 mrueckertAATTsuse.de
- fix build on sle11: use package name buildrequires instead of
pkgconfig

Tue Jan 12 13:00:00 2016 astiegerAATTsuse.com
- build with libfastjson (mandatory from 8.16.0)

Sat Jan 2 13:00:00 2016 astiegerAATTsuse.com
- rsyslog 8.15.0:

* KSI (incompatible changes):
+ KSI utilities: Added option to set publication url via
- -publications-server. Required for signature verification.
+ UserID and UserKey can be set by parameter
+ Fixed wrong TLV container for KSI signatures from 0905 to 0906.
+ somewhat improved error messages
+ Update for and use libksi 3.4.0.x

* New contributed modules:
+ pmpanngfw: for translating Palo Alto Networks logs

* pmciscoios: support for asterisk before timestamp added

* solr external output plugin much enhanced

* omrabbitmq: improvements

* add support for libfastjson (as a replacement for json-c)

* pmciscoios: support for some format variations

* improvments for 0mq modules:
+ omczmq - suspend / Retry handling
+ omczmq - improved efficiency
+ omczmq - added ability to set a timeout for sends
+ omczmq - set topics can be in separate frame (default) or
part of message frame (configurable)
+ imczmq - ZMQ_ROUTER support

* Note the upstream supported modules not enabled in SUSE package:
+ grok (mmgrok)
+ omkafka

* add support for building with libfastjson

* bugfix: invalid mutex handling in omfile async write mode
could lead to segfault, even though highly unlikely (caught by
testbench on a single platform) (bsc#1000488)

Sat Nov 7 13:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.14.0:

* add property \"rawmsg-after-pri\"

* bugfix: potential misadresseing in imfile

* bugfix: re_extract RainerScript function did not work

Thu Sep 24 14:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.13.0:

* ZeroMQ enhancements

* Redis enhancements

* mmnormalize: liblognorm error messages are now emitted via
regular rsyslog error reporting mechanism (aka \"are now logged\")

* networking improvements
- drop rsyslog-8.12.0-parallel-build.patch, is upstream
- drop rsyslog-8.12.0-gnutls.patch, same

Wed Aug 26 14:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.12.0:

* Harmonize resetConfigVariables values and defaults

* GT/KSI: fix some issues in signature file format and add conversion tool

* bugfix: ommysql did not work when gnutls was enabled

* bugfix omfile: potential memory leak on file close

* bugfix omfile: potential race in dynafile detection/creation

* bugfix omfile: Fix race-condition detection in path-creation code

* bugfix parser subsystem: potential misadressing in SanitizeMsg()

* imfile: files moved outside of directory are now (properly) handled

* bugfix: imfile: segfault when using startmsg.regex

* bugfix imfile: file table was corrupted when on file deletion

* bugfix ompgsql: transaction were improperly handled

* bugfix mmjsonparse: memory leak if non-cee-json message is processed

* testbench: remove raciness from UDP based tests

* testbench: added bash into all scripts makign it mandatory

* bugfix testbench: Fixed problem building syslog_caller util when
liblogging-stdlog is not available.
- add upstream patches:

* rsyslog-8.12.0-gnutls.patch to fix build with gnutls

* rsyslog-8.12.0-parallel-build.patch to fix parallel build

Wed Jul 1 14:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.11.0
- new features:

* signature provider for Keyless Signature Infrastructure (KSI)
- bug fixes:

* imfile: regex multiline mode ignored escapeLF option

* omkafka: fixed several concurrency issues, most of them related
to dynamic topics.

* execonlywhenpreviousissuspended did not work correctly

* core engine: ensured global variable atomicity

* imfile: segfault when using startmsg.regex because of empty log
line

Tue May 19 14:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.10.0:

* imfile: add capability to process multi-line messages based on regex

* pmrfc3164: add new parameter \"detect.yearAfterTimestamp\"

* pmrfc3164: add new parameter \"permit.squareBracesInHostname\"

* supplementary groups are now set when dropping privileges

* imfile: added brace glob expansion to wildcard

* zmq: add the ability for zeromq input and outputs to advertise their
presence on UDP via the zbeacon API.

* added omhttpfs: contributed module for writing to HDFS via HTTP

* bug fixes
- packaging changes:

* build with GnuTLS support again as 3.4.0 is now supported

Thu Apr 30 14:00:00 2015 jengelhAATTinai.de
- Documentation does not depend on the presence of anything

Mon Apr 27 14:00:00 2015 jsegitzAATTnovell.com
- Adjusted apparmor profile based on the suggestions by Christian Boltz

* Removed empty files: module-pgsql, module-relp, module-gssapi, module-gtls

* Moved profiles to /usr/share/apparmor/extra-profiles/

* Blocked capability block_suspend
plus some other small fixes

Mon Apr 20 14:00:00 2015 jsegitzAATTnovell.com
- Adjusted apparmor profile to prevent aa-genprof failures
(bnc#925512)

Mon Apr 13 14:00:00 2015 astiegerAATTsuse.com
- disable GnuTLS support, does not build with GnuTLS 3.4.0

Tue Apr 7 14:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.9.0:
- omprog: add option \"hup.forward\" to forwards HUP to external
plugins
- imuxsock: added capability to use regular parser chain
- new sysSock.useSpecialParser module parameter
- new sysSock.parseHostname module parameter
- new useSpecialParser input parameter
- new parseHostname input parameter
- 0mq: improvements in input and output modules
- imtcp: add support for ip based bind for imtcp -> param \"address\"
- bugfix: MsgDeserialize out of sync with MsgSerialize for StrucData
- bugfix imfile: partial data loss, especially in readMode != 0
- bugfix: potential large memory consumption with failed actions
- bugfix: omudpspoof: invalid default send template in RainerScript format
- bugfix: size-based legacy config statements did not work properly
on some platforms, they were incorrectly handled, resulting in all
sorts of \"interesting\" effects (up to segfault on startup)
- build system: added option --without-valgrind-testbench
... which provides the capability to either enforce or turn off
valgrind use inside the testbench. Thanks to whissi for the patch.
- rsyslogd: fix misleading typos in error messa
- remove upstreamed rsyslog-8.8.0-nonvoid-function-return.patch

Sun Mar 1 13:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.8.0:
- omkafka: add support for dynamic topics and auto partitioning
- imtcp/imptcp: support for broken Cisco ASA TCP syslog framing
- omfwd: more detailled error messages in case of UDP send error
- TLS syslog: enable capability to turn on GnuTLS debug logging
- bugfix: $AbortOnUncleanConfig did not work
- improve rsyslogd -v output and error message with meta information
- bugfix imtcp: octet-counted framing cannot be turned off
- bugfix: build problems on Illuminos
- bugfix: invalid data size for iMaxLine global property
- bugfix: negative values for maxMessageSize global parameter were permitted
- add upstream patch rsyslog-8.8.0-nonvoid-function-return.patch
to fix compiler warnings/errors

Fri Feb 13 13:00:00 2015 astiegerAATTsuse.com
- rsyslog 8.7.0:
- add message metadata \"system\" to msg object
this permits to store metadata alongside the message
- imfile: add support for \"filename\" metadata
this is useful in cases where wildcards are used
- imptcp: make stats counter names consistent with what imudp, imtcp uses
- added new module \"omkafka\" to support writing to Apache Kafka
- omfwd: add new \"udp.senddelay\" parameter
- mmnormalize enhancements
- RainerScript \"foreach\" iterator and array reading support
Thanks to Janmejay Singh for the patch.
- now requires liblognorm >= 1.0.2
- add support for systemd >= 209 library names
- BSD \"ntp\" facility (value 12) is now also supported in filter
Note: this patch was released under ASL 2.0 (see email-conversation).
- bugfix: global(localHostName=\"xxx\") was not respected in all modules
- bugfix: emit correct error message on config-file-not-found
- bugfix: impstats emitted invalid JSON format (if JSON was selected)
- bugfix: (small) memory leak in omfile\'s outchannel code
- bugfix: imuxsock did not deactivate some code not supported by platform
- includes changes from 8.6.0:
- configuration-setting rsyslogd command line options deprecated
- new and enhanced plugins for 0mq. These are currently experimantal.
- empty rulesets have been permitted. They no longer raise a syntax error.
- add parameter -N3 to enable config check of partial config file
Use for config include files. Disables checking if any action exists at
all.
- rsyslogd -e option has finally been removed
It is deprectated since many years.
- testbench improvements
- testbench is now by default disabled
- add new RainerScript functions warp() and replace()
- mmnormalize can now also work on a variable
- new property date options for day ordinal and week number
- remove --enable-zlib configure option, we always require it
- slight source-tree restructuring: contributed modules are now in their
own ./contrib directory. The idea is to make it clearer to the end user
which plugins are supported by the rsyslog project (those in ./plugins).
- bugfix: imudp makes rsyslog hang on shutdown when more than 1 thread used
- bugfix: not all files closed on auto-backgrounding startup
- bugfix: typo in queue configuration parameter
- bugfix: unitialized buffer off-by-one error in hostname generation
- bugfix imuxsock: possible segfault when SysSock.Use=\"off\"
- bugfix: RainerScript: invalid ruleset names were accepted
- bugfix: some module entry points were not called for all modules
- bugfix omlibdbi: connection was taken down in wrong thread
- imttcp was removed because it was an incompleted experimental module
- pmrfc3164sd because it was a custom module nobody used
- omoracle was removed because it was orphaned and did not build/work
for quite some years and nobody was interested in fixing it
- includes changes from 8.5.0:
- imfile greatly refactored and support for wildcards added
- PRI-handling code refactored for more clarity and robustness
- ommail: add support for RainerScript config system [action() object]
- refactored the auto-backgrounding method
- make gntls tcp syslog driver emit more error messages
- bugfix: imfile did not complain if configured file did not exist
- bugfix: build failure on systems which don\'t have json_tokener_errors
- imgssapi: log remote peer address in some error messages
- includes changes from 8.4.3:
- ommail: minor bugfixes & improvements
- bugfix imkmsg: infinite loop on OpenVZ VMs
- bugfix: typo in queue configuration parameter made parameter unusable
- bugfix: unitialized buffer off-by-one error in hostname generation
- bugfix imfile: segfault on startup in \"inotify\" mode
- bugfix imfile: could make rsyslog exit in inotify mode
- bugfix: rsgtutil sometimes crashed in verify mode if file did not exist
- bugfix imklog: pri was miscalculated
- bugfix: imjournal did not build properly
- bugfix: mmcount did no longer build
- bugfix imuxsock: possible segfault when SysSock.Use=\"off\"
- rsyslog Version 8.5.0 fixed bsc#992146

Thu Dec 4 13:00:00 2014 andreas.stiegerAATTgmx.de
- set file permissions only on first install [boo#899316]

Wed Oct 22 14:00:00 2014 heinemannj66AATTgmail.com
- Changed BuildRequires dependencies for SLES11SP3
- BuildRequires: libjson-c-devel
- BuildRequires: libestr-devel
- BuildRequires: liblogging-devel
- BuildRequires: librelp-devel
- BuildRequires: libee-devel
- BuildRequires: liblognorm-devel
- BuildRequires: libuuid-devel

Sat Oct 18 14:00:00 2014 Led
- fix shebang of rsyslog-service-prepare script

Sat Oct 4 14:00:00 2014 andreas.stiegerAATTgmx.de
- rsyslog Version 8.4.2 [v8-stable] 2014-10-02 [bnc#899756]
This release primarily contains a correction for the previous fix
for the PRI vulnerability which was incomplete.
- bugfix: the fix for CVE-2014-3634 did not handle all cases
This is corrected now. see also: CVE-2014-3683
- fixed a build problem on some platforms
- behaviour change: \"msg\" of messages with invalid PRI set to
\"rawmsg\"

Wed Oct 1 14:00:00 2014 mtAATTsuse.de
- Removed broken zpipe utility from diag-tools package (bnc#890228)

Tue Sep 30 14:00:00 2014 mtAATTsuse.de
- update to rsyslog 8.4.1 [v8-stable] 2014-09-30 (bnc#897262)
- imudp: add for bracketing mode, which makes parsing stats easier
- permit at-sign in variable names
closes: https://github.com/rsyslog/rsyslog/issues/110
- bugfix: fix syntax error in anon_cc_numbers.py script
Thanks to github user anthcourtney for the patch.
closes: https://github.com/rsyslog/rsyslog/issues/109
- bugfix: ompgsql: don\'t loose uncomitted data on retry
Thanks to Jared Johnson and Axel Rau for the patch.
- bugfix: imfile: if a state file for a different file name was set,
that different file (name) was monitored instead of the configured
one. Now, the state file is deleted and the correct file monitored.
closes: https://github.com/rsyslog/rsyslog/issues/103
- bugfix: omudpspoof: source port was invalid
Thanks to Pavel Levshin for the patch
- bugfix: build failure on systems which don\'t have json_tokener_errors
Older versions of json-c need to use a different API (which don\'t exists
on newer versions, unfortunately...)
Thanks to Thomas D. for reporting this problem.
- bugfix: omelasticsearch does not work with broken/changed ES 1.0+ API
closes: https://github.com/rsyslog/rsyslog/issues/104
- bugfix: mmanon did not properly anonymize IP addresses starting with \'9\'
Thanks to defa-at-so36.net for reporting this problem.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=529
- bugfix: build problems on SuSe Linux
Thanks Andreas Stieger for the patch
- bugfix: omelasticsearch error file did not work correctly on ES 1.0+
due to a breaking change in the ElasticSearch API.
see also: https://github.com/rsyslog/rsyslog/issues/104
- bugfix: potential abort when a message with PRI > 191 was processed
if the \"pri-text\" property was used in active templates, this could
be abused to a remote denial of service from permitted senders
see also: CVE-2014-3634
- removed patches obsoleted by this version:
[- rsyslog-8.4.0_implicit_declaration.patch,
- rsyslog-8.4.0-json-c-0.12-configure.patch,
- rsyslog-8.4.0-json-c-0.12.patch]
- adopted patch for modified rsyslog.service:
[
* rsyslog-unit.patch]

Mon Sep 22 14:00:00 2014 andreas.stiegerAATTgmx.de
- fix build with json-c 0.12 with upstream patch
rsyslog-8.4.0-json-c-0.12.patch
- json-c provides a compatibility pkg-config for \"json\". Add
rsyslog-8.4.0-json-c-0.12-configure.patch to check for the
required function directly.

Wed Sep 17 14:00:00 2014 wagner-thomasAATTgmx.at
- added firewall template file

Fri Aug 22 14:00:00 2014 mtAATTsuse.de
- Stop syslog.socket in %preun to avoid the daemon we uninstall
gets started by a log message due to dependencies (bnc#840815).

Thu Aug 21 14:00:00 2014 mrueckertAATTsuse.de
- reenable gssapi module

Thu Aug 21 14:00:00 2014 mrueckertAATTsuse.de
- rsyslog 8.4.0 [v8-stable]
- this is the new stable branch, which incorporates all
enhancements of rsyslog 8.3.
- rsyslog 8.3.5 [v8-devel] 2014-08-05
- mmjsonparse: support selectable cookie and target containers
This permits to put different meanings into a json formatted
syslog message, e.g. the \"traditional\" cee or cim data.
- bugfix: mmjsonparse did not build with json-c < 0.10 This was a
regression introduced some time in the past in order to support
API changes in json-c. Now we check for the - rsyslog and use
proper code.
- omprog: emit error message via syslog() if loading binary fails
This happens after forking, so omprog has no longer access to
rsyslog\'s regular error reporting functions. Previously, this
meant any error message was lost. Now it is emitted via regular
syslog (which may end up in a different instance, if multiple
instances run...)
- couple of patches imported from v7-stable (7.6.4)
- rsyslog 8.3.4 [v8-devel] 2014-07-11
- new pmciscoios parser supporting various Cisco IOS formats
- RFC3164 timestamp parser now accepts timezones and subsecond
resolution ... at least for some common formats and where we
could do so without running risk of breaking proper formats (or
introducing regressions)
- new parser config object -- permits to define custom parser
definitions
- new tzinfo config object -- permits to define time zone offsets
This is a utility object that currently is being used by some
parsers.
- bugfix: mishandling of input modules not supporting new input
instances If they did not support this, accidently the output
module part of the module union was written, leading to
unpredictable results. Note: all core modules do support this
interface, but some contributed or very old ones do not.
- bugfix: double-free when ruleset() parser parameters were used
While unlikely, this could cause stability issues even after
the config phase.
- rsyslog 8.3.3 [v8-devel] 2014-06-26
- unify input object naming imudp now supports \"name\" paramter,
as other inputs do. \"inputname\" has been deprecated, but can
still be used. Same applies to \"appendport\" subparamter\".
Thanks to \"Nick Syslog\" for the suggestion.
- made the missing (contributed) modules build under v8 [import
from 8.2.2] Modules:

* mmrfc5424addhmac omrabbitmq omgssapi omhdfs omzmq3
- added a cleanup process (janitor); permits to close omfile
files after a timeout
- make omgssapi build under v8.3 [import vom v8.2] note that we
could do this to the stable, because there is NO regression
chance at all: only omgssapi was changed, and this module did
NOT work previously.
- removed obsolete --disable-fsstnd configure option Thanks to
Thomas D. for alerting us. Closes:
https://github.com/rsyslog/rsyslog/issues/72
- rsyslog 8.3.2 [v8-devel] 2014-05-02
- new template options for date extraction:
- year
- month
- day
- wday
- hour
- minute
- second
- tzoffshour
- tzoffsmin
- tzoffsdirection
- wdayname For string templates, these are property options and
they are prefixed with \"date-\" (e.g. \"date-year\",
\"date-month\", ...) see also:
https://github.com/rsyslog/rsyslog/issues/65
- bugfix: mmexternal remove framing char before processing JSON
reply This did not have any real bad effects, but caused
unnecessary processing, as empty replies were not properly
detected. Otherwise, the bug was not noticible from the user\'s
PoV.
- bugfix: mmexternal segfault due to invalid free in non-json
input mode closes: https://github.com/rsyslog/rsyslog/issues/70
- bugfix: mmexternal segfault when external plugin sent invalid
reply ... or no reply at all. This happened if the reply was
imporper JSON. Now, we emit an error message in those cases.
see also: https://github.com/rsyslog/rsyslog/issues/69
- bugfix: mmexternal did potentially pass incomplete data to
restarted external plugin This could happen if EPIPE was
returned \"too late\", in which case the beginning of the data
could be lost.
- bugfix: mmexternal did not properly process messages over 4KiB
The data to be passed to the external plugin was truncated
after 4KiB. see: https://github.com/rsyslog/rsyslog/issues/64
- imrelp: added support for per-listener ruleset and inputname
see: https://github.com/rsyslog/rsyslog/pull/63 Thanks to
bobthesecurityguy github user for the patch
- rsyslog 8.3.1 [v8-devel] 2014-04-24
- external message modification interface now support modifying
message PRI
- \"jsonmesg\" property will include uuid only if one was
previously generated This is primarily a performance
optimization. Whenever the message uuid is gotten, it is
generated when not already present. As we used the regular
setter, this means that always the uuid was generated, which is
quite time-consuming. This has now been changed so that it only
is generated if it already exists. That also matches more
closly the semantics, as \"jsonmesg\" should not make
modifications to the message. Note that the same applies to
\"fulljson\" passing mode for external plugins.
- added plugin to rewrite message facility and/or severity Name:
fac-sever-rewrite.py
- permits to build against json-c 0.12 Unfortunately, json-c had
an ABI breakage, so this is necessary. Note that - rsyslogs
prior to 0.12 had security issues (CVE-2013-6370,
CVE-2013-6371) and so it is desirable to link against the new -
rsyslog. Thanks to Thomas D. for the patch. Note that at least
some distros have fixed the security issue in older - rsyslogs
of json-c, so this seems to apply mostly when building from
sources.
- bugfix: using UUID property could cause segfault
- bugfix/mmexternal: memory leak
- bugfix: memory leak when using \"jsonmesg\" property
- bugfix: mmutf8fix did not detect two invalid sequences Thanks
to Axel Rau for the patch.
- bugfix: build problems with lexer.l on some platforms For some
reason, the strdup() prototype and others are missing. I admit
that I don\'t know why, as this happens only in 8.3.0+ and there
is no indication of changes to the affected files. In any case,
we need to fix this, and the current solution works at least as
an interim one.
- rsyslog 8.3.0 [v8-devel] 2014-04-10
- new plugin for anonymizing credit card numbers Thanks to Peter
Slavov for providing the code.
- external message modification modules are now supported They
are bound via the new native module \"mmexternal\". Also, a
sample skeleton for an external python message modification
module has been added.
- new $jsonmesg property with JSON representation of whole
message object closes:
https://github.com/rsyslog/rsyslog/issues/19
- improved error message for invalid field extraction in string
template see also:
http://kb.monitorware.com/problem-with-field-based-extraction-t12299.html
- fix build problems on Solaris
- NOTE: a json-c API that we begun to use requires the compiler
to be in c99 mode. By default, we select it automatically. If
you modify this and use gcc, be sure to include \"-std=c99\" in
your compiler flags. This seems to be necessary only for older
- rsyslogs of gcc.
- rsyslog 8.2.3 [v8-stable] 2014-??-??
- bugfix: ommysql: handle/mem leak upon termination of worker
thread This could become bad if the (instance) worker threads
are often started and terminated. But it takes quite a while to
show effect.
- added documentation tarball and also install the html
documentation
new subpackage rsyslog-doc
- drop rsyslog-pid-file.patch: patch is included in update
- added rsyslog-8.4.0_implicit_declaration.patch:
include sys/time.h for gettimeofday

Wed Jul 16 14:00:00 2014 jsegitzAATTsuse.com
- Preliminary AppArmor support. Since those profiles need to be tested
properly they\'ll live in /etc/apparmor/profiles/extras.
- Added rsyslog-pid-file.patch to fix a regression that causes the pid
file to be created in /etc

Wed Jun 4 14:00:00 2014 andreas.stiegerAATTgmx.de
- rsyslog 8.2.2 [v8-stable]

* made contributed modules build under v8
- add mmrfc5424addhmac, was removed in upgrade to v8-stable series
- fix warning about missing symlink
/usr/sbin/rcrsyslog -> /usr/sbin/service

Mon May 19 14:00:00 2014 mtAATTsuse.com
- rpm: use _rundir rpm macro if defined (bnc#873857)

Sat May 17 14:00:00 2014 heinemannj66AATTgmail.com
- adjust default configuration to address warning:
\"rsyslogd-2307: warning: ~ action is deprecated, consider using
the \'stop\' statement instead\"

Wed May 14 14:00:00 2014 heinemannj66AATTgmail.com
- rsyslog 8.2.1 [v8-stable]

* permits to build against json-c 0.12
Unfortunately, json-c had an ABI breakage, so this is necessary. Note
that versions prior to 0.12 had security issues (CVE-2013-6370,
CVE-2013-6371) and so it is desirable to link against the new version.
Thanks to Thomas D. for the patch. Note that at least some distros
have fixed the security issue in older versions of json-c, so this
seems to apply mostly when building from sources.

* doc is no longer shipped as part of the rsyslog tarball
Instead, the rsyslog-doc project creates its own tarball. This is the
result of a mailing list discussion after the 8.2.0 release with a
tarball-in-tarball approach, which was disliked by almost all distro
maintainers. This move also has the advantage of de-coupling the
release cycles of both projects a bit (which turned out to be a bit
problematic in practice).

* bugfix: mmutf8fix did not detect two invalid sequences

Wed May 14 14:00:00 2014 heinemannj66AATTgmail.com
- rsyslog 8.2.0 [v8-stable]
This starts a new stable branch based on 8.1.6 plus the following changes:

* we now use doc from the rsyslog-doc project
As such, the ./doc subtree has been removed. Instead, a cache of the
rsyslog-doc project\'s files has been included in ./rsyslog-doc.tar.gz.
Note that the exact distribution mode for the doc is still under
discussion and may change in future releases.
This was agreed upon on the rsyslog mailing list. For doc issues
and corrections, be sure to work with the rsyslog-doc project. It is
currently hosted at https://github.com/rsyslog/rsyslog-doc

* add support for specifying the liblogging-stdlog channel spec
new global parameter \"stdlog.channelspec\"

* add \"defaultnetstreamdrivercertfile\" global variable to set a default
for the certfile.

* omelasticsearch: add new \"usehttps\" parameter for secured connections

* \"action resumed\" message now also specifies module type
which makes troubleshooting a bit easier. Note that we cannot output all
the config details (like destination etc) as this would require much more
elaborate code changes, which we at least do not like to do in the
stable version.

* add capability to override GnuTLS path in build process

* better and more consistent action naming, action queues now always
contain the word \"queue\" after the action name

* bugfix: ompipe did resume itself even when it was still in error

Wed May 14 14:00:00 2014 heinemannj66AATTgmail.com
- rsyslog 7.6.4 [v7-stable]

* removed obsolete --disable-fsstnd configure option

* permits to build against json-c 0.12

* new omfile default module parameters:
filecreatemode
fileowner
fileownernum
filegroup
filegroupnum
dirowner
dirownernum
dirgroup
dirgroupnum

* bugfix: using UUID property could cause segfault

* bugfix: mmutf8fix did not detect two invalid sequences

Thu Mar 27 13:00:00 2014 andreas.stiegerAATTgmx.de
- rsyslog 7.6.3 [v7-stable]

* add capability to override GnuTLS path in build process

* support (and require) librelp 1.2.5

* bugfix: ompipe used invalid default template

* bugfix: ompipe did emit many suspension messages for /dev/xconsole

Thu Mar 20 13:00:00 2014 andreas.stiegerAATTgmx.de
- rsyslog 7.6.2 [v7.6-stable]
major updates of the 7.6 series:

* imrelp/omrelp now support TLS & (zip) compression

* impstats is now emitting resource usage counters, can directly
emit delta values and can now be bound to a ruleset

* mmpstrucdata is a new module to parse RFC5424 structured data
into JSON message properties

* mmutf8fix is a new module to fix invalid UTF-8 sequences

* mmsequence is a new module that helps with action load balancing

* new defaults for main/ruleset queues to be more enterprise-like
- For specific version changelogs, see

* http://www.rsyslog.com/changelog-for-7-6-0-v7-stable/

* http://www.rsyslog.com/changelog-for-7-6-1-v7-stable/

* http://www.rsyslog.com/changelog-for-7-6-2-v7-stable/
- packaging changes:

* drop rsyslog-7.4.6-omelasticsearch-atomic-instructions-ppc.patch
committed upstream

* build with rfc3195 support

Thu Mar 20 13:00:00 2014 andreas.stiegerAATTgmx.de
- rsyslog 7.4.10:
- bugfix: json templates are improperly created
- ompgsql bugfix: improper handling of auto-backgrounding mode
- contains changes from 7.4.9:
- added ProcessInternalMessages global system parameter
- bugfix: imuxsock input parameters were not accepted
- bugfix: potential double-free in RainerScript equal comparison
- bugfix: some RainerScript Json(Variable)/string comparisons were wrong

Tue Feb 11 13:00:00 2014 andreas.stiegerAATTgmx.de
- use liblognorm0 transitional package in Factory to fix build
until rsyslog is updated to support liblognorm >= 1.0.0

Fri Jan 24 13:00:00 2014 mtAATTsuse.de
- Added Restart=on-abort to rsyslog.service (fate#315133)

Wed Jan 8 13:00:00 2014 andreas.stiegerAATTgmx.de
- update to 7.4.8 [v7.4-stable]
- rsgtutil provides better error messages on unfinished signature
blocks
- bugfix: guard against control characters in internal (error)
messages
- bugfix: immark did emit messages under kern.=info instead of
syslog.=info Note that his can potentially break exisiting
configurations that rely on immark sending as kern.=info.

Wed Dec 11 13:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.4.7 [v7.4-stable] [bnc#855058]
- bugfix: limiting queue disk space did not work properly
- bugfix: linux kernel-like ratelimiter did not work properly with all
inputs (for example, it did not work with imdup).
- bugfix: disk queues created files in wrong working directory
- bugfix: legacy directive $ActionQueueWorkerThreads was not honored
- bugfix: segfault on startup when certain script constructs are used
e.g. \"if not $msg ...\"
- bugfix: imuxsock: UseSysTimeStamp config parameter did not work correctly
- bugfix: $SystemLogUseSysTimeStamp/$SystemLogUsePIDFromSystem did not work
- improved checking of queue config parameters on startup
- bugfix: call to ruleset with async queue did not use the queue
- bugfix: if imtcp is loaded and no listeners are configured (which is
uncommon), rsyslog crashes during shutdown.

Wed Nov 6 13:00:00 2013 mtAATTsuse.de
- Fixed to avoid rebuild rscryutil.1 rsgtutil.1 on SLE-11.

Mon Nov 4 13:00:00 2013 andreas.stiegerAATTgmx.de
- fix ppc build, add patch from upstream to fix build on platforms
without atomic instructions
rsyslog-7.4.6-omelasticsearch-atomic-instructions-ppc.patch

Thu Oct 31 13:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.4.6 [v7.4-stable] [bnc#848574]
- bugfix: potential abort during HUP
- bugfix: imtcp flowControl parameter incorrectly defaulted to \"off\"
- now requires libestr 0.1.9 for number handling in RainerScript
- bugfix: memory leak in strlen() RainerScript function
- bugfix: buffer overrun if re_extract function was called for submatch 50
- bugfix: memleak in re_extract() function
- bugfix: potential abort in RainerScript optimizer
- bugfix: memory leak in omhiredis
- bugfix: segfault if variable was assigned to non-container subtree

Mon Oct 28 13:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.4.5 [v7.4-stable]
- mmanon: removed the check for specific \"terminator characters\"
- now requires libestr 0.1.8
- omelasticsearch: add failed.httprequests stats counter
- bugfix: invalid property filter was not properly disabled in ruleset
- bugfix: segfault if re_extract() function was used and no match found
- bugfix: potential misadressing on startup if property-filter was used
- bugfix: omelasticsearch: correct failed.http stats counter
- bugfix: omelasticsearch: did not correctly initialize stats counters
- bugfix: omelasticsearch: failed.es counter was only maintained in bulk mode
- bugfix: mmanon did not detect all IP addresses in rewrite mode
- bugfix: mmanon sometimes used invalid replacement char in simple mode
- bugfix: memory leak in mmnormalize
- bugfix: array-based ==/!= comparisions lead to invalid results
- bugfix: omprog blocked signals to executed programs
- bugfix: doc: imuxsock legacy param $SystemLogSocketParseTrusted was
misspelled
- bugfix: imfile \"facility\" input parameter improperly handled
- bugfix: small memory leak in imfile when $ResetConfigVariables was used
- bugfix: segfault on startup if TLS was used but no CA cert set
- bugfix: segfault on startup if TCP TLS was used but no cert or key set
- bugfix: some more build problems with newer json-c versions
- bugfix: build system: libgcrypt.h needed even if libgrcypt was disabled

Thu Sep 12 14:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.4.4 [v7.4-stable]
- better error messages in GuardTime signature provider
- make rsyslog use the new json-c pkgconfig file if available
- bugfix: imfile parameter \"persistStateInterval\" was unusable
due to a case typo in imfile; work-around was to use legacy config
- bugfix: TLV16 flag encoding error in signature files from GT provider
This fixes a problem where the TLV16 flag was improperly encoded.
Unfortunately, existing files already have the bug and may not properly
be processed. The fix uses constants from the GuardTime API lib to
prevent such problems in the future.
- bugfix: slightly malformed SMTP handling in ommail
- bugfix: segfault in omprog if no template was provided (now dflt is used)
- bugfix: segfault in ompipe if no template was provided (now dflt is used)
- bugfix: segfault in omsnmp if no template was provided (now dflt is used)
- bugfix: some omsnmp optional config params were flagged as mandatory
- bugfix: segfault in omelasticsearch when resuming queued messages
after restarting Elasticsearch
- bugfix: imtcp addtlframedelimiter could not be set to zero
- doc bugfix: remove no-longer existing omtemplate from developer doc
was specifically mentioned as a sample for creating new plugins

Sat Jul 20 14:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.4.3 [v7.4-stable]
- bugfix: memory leak if disk queues were used and json data
rresent
- bugfix: CEE/json data was lost during disk queue operation
- bugfix: potential segfault during startup on invalid config
- bugfix: 100% CPU utilization when DA queue became full
- bugfix: omlibdbi did not properly close connection on some
errors
- cosmetic bugfix: file name buffer was not freed on disk queue
destruction

Fri Jul 5 14:00:00 2013 mtAATTsuse.de
- Update to 7.4.2 [v7.4-stable] (bnc#828140,CVE-2013-4758):
- bugfix: in RFC5425 TLS, multiple wildcards in auth could cause
segfault
- bugfix: RainerScript object required parameters were not properly
checked - this clould result to segfaults on startup if parameters
were missing.
- bugfix: double-free in omelasticsearch
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=461
a security advisory for this bug is available at:
http://www.lsexperts.de/advisories/lse-2013-07-03.txt
PLEASE NOTE: This issue only existed if omelasticsearch was used
in a non-default configuration, where the \"errorfile\" parameter
was specified. Without that parameter set, the bug could not be
triggered. Thanks to Markus Vervier and Marius Ionescu for providing
a detailled bug report. Special thanks to Markus for coordinating
his security advisory with us.
- bugfix: omrelp potential segfault at startup on invalid config
parameters
- bugfix: small memory leak when $uptime property was used
- bugfix: potential segfault on rsyslog termination in imudp
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=456
- bugfix: lmsig_gt abort on invalid configuration parameters
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=448
Thanks to Risto Laanoja for the patch.
- imtcp: fix typo in \"listner\" parameter, which is \"listener\"
Currently, both names are accepted.
- solved build problems on FreeBSD
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=457
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=458
Thanks to Christiano for reproting and suggesting patches
- solved build problems on CENTOS5

Wed Jun 26 14:00:00 2013 mtAATTsuse.de
- Use --enable-cached-man-pages configure option on SLES-11, where
rst2man is not available and removed prebuilt man pages.

Sat Jun 22 14:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.4.1 [v7.4-stable]:
- imjournal: add ratelimiting capability
- bugfix imzmq3: potential segfault on startup
- includes changes from 7.4.0 [v7.4-stable]:
- doc bugfix: ReadMode wrong in imfile doc, two values were swapped
- imjournal: no longer do periodic wakeup
- bugfix: potential hang
*in debug mode
* on rsyslogd termination
- bugfix: $template statement with multiple spaces lead to invalid tpl name
- 0mq fixes
- includes changes from version 7.3.15
- bugfix: problem in build system (especially when cross-compiling)
- bugfix: imjournal had problem with systemd journal API change
- imjournal: now obtain and include PID
- bugfix: .logsig files had tlv16 indicator bit at wrong offset
- bugfix: omrelp legacy config parameters set a timeout of zero
which lead the legacy config to be unusable.
- bugfix: segfault on startup if a disk queue was configure without file
name
- bugfix: invalid addressing in string class (recent regression)
- packaging changes:
- rebase rsyslog-unit.patch
- move libee/liblognorm dependencies to mmnormalize conditional

Fri Jun 14 14:00:00 2013 crrodriguezAATTopensuse.org
- Required version of pkgconfig(relp) is >= 1.0.3
- Requires version of libsystemd-journal is >= 197
- Notify systemd on sucessful startup of the daemon to avoid
confusing behaviour such as :
http://lists.opensuse.org/opensuse/2013-06/msg00603.html

Mon May 13 14:00:00 2013 mtAATTsuse.de
- Fixed SLES-11 build that does not have rst2man/python-docutils;
added pre-built rscryutil.1 and rsgtutil.1 as sources because
v7.3.14 does not ship them pre-built any more.

Tue May 7 14:00:00 2013 mtAATTsuse.de
- update to 7.3.14 [beta] 2013-05-06:
- bugfix: some man pages were not properly installed either
rscryutil or rsgtutil man was installed, but not both.
Thanks to Marius Tomaschewski for the patch.
- bugfix: potential segfault on startup when builtin module was
specified in module() statement.
Thanks to Marius Tomaschewski for reporting the bug.
- bugfix: segfault due to invalid dynafile cache handling
Accidently, the old-style cache size parameter was used when the
dynafile cache was created in a RainerScript action. If the
old-style size was lower than the one actually set, this lead to
misadressing when the size was overrun, and that could lead to
all kinds of “interesting things”, often in segfaults.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=440

Tue Apr 30 14:00:00 2013 mtAATTsuse.de
- Adopted config file to stop instead of deprecated \"~\" action.

Tue Apr 30 14:00:00 2013 mtAATTsuse.de
- Enabled log file signing module lmsig_gt using GuardTime as
separate rsyslog-module-guardtime package.
- Moved previously enabled log file encryption module lmcry_gcry
and its utility into a separate rsyslog-module-gcrypt package.

Tue Apr 30 14:00:00 2013 mtAATTsuse.de
- update to 7.3.13 [beta] 2013-04-29:
- added omrabbitmq module (contributed, untested)
Note: this is unsupported and as such was moved immediately
into the beta version.
Thanks to Vaclav Tomec for providing this module.
- bugfix: build problem when –enable-encryption was not selected
Thanks to Michael Biebl for fixing this.
- doc bugfix: omfile parameter “VeryRobustZip” was documentas as
“VeryReliableZip”
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=437
Thanks to Thomas Doll for reporting this.
- update to 7.3.12 [devel] 2013-04-25:
- added doc for omelasticsearch
Thanks to Radu Gheorghe for the doc contribution.
- omelasticsearch: _id field support for bulk operations
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=392
Thanks to Jérôme Renard for the idea and patches.
- max number of templates for plugin use has been increased to five
- platform compatibility enhancement: solve compile issue with
libgcrypt do not use GCRY_CIPHER_MODE_AESWRAP where not available
fix compile on Solaris
Thanks to Martin Carpenter for the patch.
- bugfix: off-by-one error in handling local FQDN name (regression)
A remporary buffer was allocated one byte too small. Did only
affect startup, not actual operations. Came up during routine tests,
and can have no effect once the engine runs. Introduced in 7.3.11.
- bugfix: build problems on Solaris
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=436
- bugfix: block size limit was not properly honored
- bugfix: potential segfault in guardtime signature provider
it could segfault if an error was reported by the GuardTime API,
because an invalid free could happen then
- update to 7.3.11 [devel] 2013-04-23
- added support for encrypting log files (lmcry_gcry plugin)
- omhiredis: added support for redis pipeline support
Thanks to Brian Knox for the patch.
- bugfix: $PreserveFQDN is not properly working
Thanks to Louis Bouchard for the patch
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=426
- bugfix: imuxsock aborted due to problem in ratelimiting code
Thanks to Tomas Heinrich for the patch.
- bugfix: imuxsock aborted under some conditions regression from
ratelimiting enhancements – this was a different one to the one
Tomas Heinrich patched.
- bugfix: timestamp problems in imkmsg
- Enabled systemd imjournal,omjournal modules on > 12.3.
- Enabled mmanon, providing anonymization support
- Enabled lmcry_gcry.so, providing log file encryption support
and the rscryutil utility to manage the encrypted log files.
- Removed obsolete --enable-pthreads configure option.

Fri Apr 19 14:00:00 2013 andreas.stiegerAATTgmx.de
- rsyslogd.conf removed from upstream tarball, no longer install as
documentation.
- build requirement for libestr is >= 0.1.5

Fri Apr 19 14:00:00 2013 mtAATTsuse.de
- update to 7.2.7 [v7-stable] 2013-04-17:
- rsyslogd startup information is now properly conveyed back to init
when privileges are beging dropped. Actually, we have moved
termination of the parent in front of the priv drop. So it shall
work now in all cases. See code comments in commit for more details.
- If forking, the parent now waits for a maximum of 60 seconds for
termination by the child
- improved debugging support in forked (auto-backgrounding) mode.
The rsyslog debug log file is now continued to be written across the
fork.
- updated systemd files to match current systemd source
- bugfix: failover/action suspend did not work correctly
This was experienced if the retry action took more than one second
to complete. For suspending, a cached timestamp was used, and if the
retry took longer, that timestamp was already in the past. As a
result, the action never was kept in suspended state, and as such no
failover happened. The suspend functionalit now does no longer use
the cached timestamp (should not have any performance implication,
as action suspend occurs very infrequently).
- bugfix: nested if/prifilt conditions did not work properly
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=415
- bugfix: script == comparison did not work properly on JSON objects
[backport from 7.3 branch]
- bugfix: imudp scheduling parameters did affect main thread, not imudp
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=409
- bugfix: imuxsock rate-limiting could not be configured via legacy conf
Rate-limiting for the system socket could not be configured via legacy
configuration directives. However, the new-style RainerScript config
options worked.
Thanks to Milan Bartos for the patch.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=390
- bugfix: using group resolution could lead to endless loop
Thanks to Tomas Heinrich for the patch.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310
- bugfix: $mmnormalizeuseramsg paramter was specified with wrong type
Thank to Renzhong Zhang for alerting us of the problem.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=420
- bugfix: RainerScript getenv() function caused segfault when var was
not found.
Thanks to Philippe Muller for the patch.
- bugfix: several issues in imkmsg
see bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=421#c8
- bugfix: imuxsock was missing SysSock.ParseTrusted module parameter
To use that functionality, legacy rsyslog.conf syntax had to be used.
Also, the doc was missing information on the \"ParseTrusted\" set of
config directives.
- bugfix: parameter action.execOnlyWhenPreviousIsSuspended was
accidently of integer-type. For obvious reasons, it needs to be
boolean. Note that this change can break existing configurations
if they circumvented the problem by using 0/1 values.
- doc bugfix: rsyslog.conf man page had invalid file format info
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=418
- update to 7.2.6 [v7-stable] 2013-03-05:
- slightly improved config parser error messages when invalid escapes
happen
- bugfix: include files got included in the wrong order
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=411
This happens if an $IncludeConfig directive was done on multiple
files (e.g. the distro default of $IncludeConfig /etc/rsyslog.d/
*.conf).
In that case, the order of include file processing is reversed, which
could lead to all sorts of problems.
Thanks to Nathan Stratton Treadway for his great analysis of the
problem, which made bug fixing really easy.
- bugfix: omelasticsearch failed when authentication data was provided
... at least in most cases it emitted an error message:
\"snprintf failed when trying to build auth string\"
Thanks to Joerg Heinemann for alerting us.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=404
- bugfix: some property-based filter were incorrectly parsed
This usually lead to a syntax error on startup and rsyslogd not actually
starting up. The problem was the regex, which did not care for double
quote characters to follow in the action part - unfortunately something
that can frequently happen with v6+ format. An example:
:programname, isequal, \"as\" {action(type=\"omfile\" ...) }
Here, the part
:programname, isequal, \"as\" {action(type=\"omfile\"
was treated as the property filter, and the rest as action part.
Obviously, this did not work out. Unfortunately, such situations usually
resulted in very hard to understand error messages.

Tue Apr 16 14:00:00 2013 mtAATTsuse.de
- Fixed service file to pass $RSYSLOGD_PARAMS to rsyslogd again.

Sun Apr 14 14:00:00 2013 crrodriguezAATTopensuse.org
- Fix systemd units to do exactly what is documented as
required --> http://www.freedesktop.org/wiki/Software/systemd/syslog
In particular, it must not mess with the ordering of syslog.target
this is done by removing the custom unit and adapting the upstream
one with openSUSE additions (rsyslog-unit.patch)

Fri Mar 29 13:00:00 2013 vcizekAATTsuse.com
- restore SELinux label when creating xconsole (bnc#812447)

Tue Feb 19 13:00:00 2013 mtAATTsuse.de
- Fixed rsyslog.service file to support reload (bnc#803994)

Tue Jan 15 13:00:00 2013 mtAATTsuse.de
- Fixed relp build requires change, which broke SLE-11 build.

Mon Jan 14 13:00:00 2013 andreas.stiegerAATTgmx.de
- update to 7.2.5 [v7-stable]:
- build system cleanup
- bugfix: omelasticsearch did not properly compile on some platforms
due to missing libmath
- bugfix: on termination, actions were incorrectly called
- bugfix: very large memory consumption (and probably out of memory) when
FromPos was specified in template, but ToPos not.
- bugfix: timeval2syslogTime cause problems on some platforms
due to invalid assumption on structure data types.
- bugfix: compile errors in im3195
- bugfix: doGetFileCreateMode() had invalid validity check
- bugfix: mmjsonparse errornously returned action error when no
CEE cookie was present.

Wed Jan 9 13:00:00 2013 mtAATTsuse.com
- Enable rsyslog.service and create the syslog.service alias link
in post install -- regardless of a preset config (bnc#790805).
- Check the existence of /etc/init.d/syslog script before calling
the restart_on_update and stop_on_removal macros to avoid errors
on update. Since openSUSE 12.3, no syslog init script is shipped
(bnc#790298,bnc#750478).

Mon Jan 7 13:00:00 2013 mtAATTsuse.com
- Update to 7.2.4 [v7-stable] with following changes:
- enhance: permit RFC3339 timestamp in local log socket messages
Thanks to Sebastien Ponce for the patch.
- imklog: added ParseKernelTimestamp parameter (import from 5.10.2)
Thanks to Marius Tomaschewski for the patch.
- fix missing functionality: ruleset(){} could not specify ruleset queue
The \"queue.xxx\" parameter set was not supported, and legacy ruleset
config statements did not work (by intention). The fix introduces the
\"queue.xxx\" parameter set. It has some regression potential, but only
for the new functionality. Note that using that interface it is possible
to specify duplicate queue file names, which will cause trouble. This
will be solved in v7.3, because there is a too-large regression
potential for the v7.2 stable branch.
- imklog: added KeepKernelTimestamp parameter (import from 5.10.2)
Thanks to Marius Tomaschewski for the patch.
- bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds
... actually, they are microseconds. So the fractional part of the
timestamp was not properly formatted. (import from 5.10.2)
Thanks to Marius Tomaschewski for the bug report and the patch idea.
- bugfix: supportoctetcountedframing parameter did not work in imptcp
- bugfix: modules not (yet) supporting new conf format were not properly
registered. This lead to a \"module not found\" error message instead of
the to-be-expected \"module does not support new style\" error message.
That invalid error message could be quite misleading and actually stop
people from addressing the real problem (aka \"go nuts\" ;))
- bugfix: template \"type\" parameter is mandatory (but was not)
- bugfix: some message properties could be garbled due to race condition
This happened only on very high volume systems, if the same message was
being processed by two different actions. This was a regression caused
by the new config processor, which did no longer properly enable msg
locking in multithreaded cases. The bugfix is actually a refactoring of
the msg locking code - we no longer do unlocked operations, as the use
case for it has mostly gone away. It is potentially possible only at
very low-end systems, and there the small additional overhead of doing
the locking does not really hurt. Instead, the removal of that
capability can actually slightly improve performance in common cases,
as the code path is smaller and requires slightly less memory writes.
That probably outperforms the extra locking overhead (which in the
low-end case always happens in user space, without need for kernel
support as we can always directly aquire the lock - there is no
contention at all).
- Removed imklog-kernel-timestamp-parsing (bnc#783967) patch obsoleted
by this version.

Fri Nov 23 13:00:00 2012 mrueckertAATTsuse.de
- fix zeromq support

Fri Nov 23 13:00:00 2012 mrueckertAATTsuse.de
- fix hiredis support

Thu Nov 22 13:00:00 2012 mrueckertAATTsuse.de
- enabled elastic search support (build enabled by default):
- > new buildrequires curl devel
- > new subpackage rsyslog-module-elasticsearch
- added --enable-unlimited-select
- added --enable-imttcp:
- > this module is packaged in the main package as it has no
new dependencies
- added --enable-imdiag
- > this module is packaged in the diag package
- prepared adding support for hiredis, hdfs, mongodb and zeromq

Thu Nov 22 13:00:00 2012 mtAATTsuse.com
- Update to 7.2.3 (v7-stable) a release providing following fixes:
- regression fix: rsyslogd terminated when wild-card $IncludeConfig did not
find actual include files. For example, if this directive is present:
$IncludeConfig /etc/rsyslog.d/
*.conf
and there are no
*.conf files in /etc/rsyslog.d (but rsyslog.d exists),
rsyslogd will emit an error message and terminate. Previous (and expected)
behaviour is that an empty file set is no problem. HOWEVER, if the
directory itself does not exist, this is flagged as an error and will
load to termination (no startup).
Unfortunately, this is often the case by default in many distros, so this
actually prevents rsyslog startup.
- doc improvements
- enabled to build without libuuid, at loss of uuid functionality
this enables smoother builds on older systems that do not support
libuuid. Loss of functionality should usually not matter too much as
uuid support has only recently been added and is very seldom used.
- bugfix: omfwd did not properly support \"template\" parameter
- bugfix: potential segfault when re_match() function was used
Thanks to oxpa for the patch.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=371
- bugfix: potential abort of imtcp on rsyslogd shutdown
- bugfix: imzmq3 segfault with PULL subscription
Thanks to Martin Nilsson for the patch.
- bugfix: improper handling of backslash in string-type template()s
- bugfix: leading quote (\") in string-type template() lead to thight loop
on startup
- bugfix: no error msg on invalid field option in legacy/string template
- bugfix: potential segfault due to invalid param handling in comparisons
This could happen in RainerScript comparisons (like contains); in some
cases an unitialized variable was accessed, which could lead to an
invalid free and in turn to a segfault.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=372
Thanks to Georgi Georgiev for reporting this bug and his great help
in solving it.
- bugfix: no error msg on unreadable $IncludeConfig path
- bugfix: $IncludeConfig did not correctly process directories
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=376
The testbench was also enhanced to check for these cases.
Thanks to Georgi Georgiev for the bug report.
- bugfix: make rsyslog compile on kfreebsd again
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=380
Thanks to Guillem Jover for the patch.
- bugfix: garbled message if field name was used with jsonf property option
The length for the field name was invalidly computed, resulting in either
truncated field names or including extra random data. If the random data
contained NULs, the rest of the message became unreadable.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=374
- bugfix: potential segfault at startup with property-based filter
If the property name was followed by a space before the comma, rsyslogd
aborted on startup. Note that no segfault could happen if the initial
startup went well (this was a problem with the config parser).
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=381
- bugfix: imfile discarded some file parts
File lines that were incomplete (LF missing)
*at the time imfile polled
the file
* were partially discarded. That part of the line that was read
without the LF was discarded, and the rest of the line was submitted in
the next polling cycle. This is now changed so that the partial content
is saved until the complete line is read. Note that the patch affects
only read mode 0.
Thanks to Milan Bartos for providing the base idea for the solution.
- Merged also fixes for unreliable kernel timestamp regression (bnc#783967),
which will be picked up in a later v7-stable release:
- imklog: added $klogParseKernelTimestamp option (default off),
wich reverts to the 5.8.x behavior to use receive time for the
kernel messages instead to try parse and convert the kernel
timestamp, what is not reliable on some hardware (intel i7/Xeon).
- imklog: added $klogKeepKernelTimestamp option (default off),
causing to not remove the kernel timestamp from the message
after a successful conversion.
- imklog: fixed a conversion bug causing a <1sec incorrectness
of the message time when the kernel timestamp is parsed.
- Removed {} arround RSYSLOG_PARAMS variable in service file. systemd
seems sometimes to not like it any more (bnc#788330).

Tue Nov 20 13:00:00 2012 mtAATTsuse.com
- Require syslog-service >= 2.0 on 12.3, otherwise < 2.0, which
contain the /etc/init.d/syslog init script.

Tue Nov 13 13:00:00 2012 mtAATTsuse.com
- imuxsock: do not log EAGAIN in nonblocking recvfrom (bnc#734672)

Mon Nov 12 13:00:00 2012 mtAATTsuse.com
- Removed handling of the -c option which is
obsolete in rsyslog-7.x.
- Fixed build requires / deps to work on 12.x and SLE-11-SP2.
- Initialized RSYSLOG_PARAMS env variable in service file.
- Marked additional log socket config as ghost.

Fri Nov 9 13:00:00 2012 mtAATTsuse.com
- Readded things removed in previous change, that is compat version
and params variable use, generation of additional (chroot) log
sockets include file, xconsole handling in rsyslog.service.
- Fixed liblognorm conditional build flag dependencies, removed all
suse version dependencies.
- Changed to install in /usr/sbin, compatibility link in /sbin.
- Added klogd to build conflicts to resolve build service deps

Tue Nov 6 13:00:00 2012 tittiatcokeAATTgmail.com
- Enabled rsyslog own systemd service file. This to resolve the
current issue with a non starting system logger with systemd 185.
(see also bnc#788330)

Mon Oct 29 13:00:00 2012 mtAATTsuse.com
- Update to 7.2.1 (v7-stable), a pure bug-fixing release:
- bugfix: ruleset()-object did only support a single statement
- added -D rsyslogd option to enable config parser debug mode
- improved syntax error messages by outputting the error token
- the rsyslog core now suspeneds actions after 10 failures in
a row. This was former the case after 1,000 failures and could
cause rsyslog to be spammed/ressources misused.
See the v6 compatibility doc for more details.
- ommongodb rate-limits error messages to prevent spamming the
syslog closes (for v7.2):
http://bugzilla.adiscon.com/show_bug.cgi?id=366
- Enabled compilation of kmsg, the kernel’s new structured logging
system modile, mmaudit the message modification module supporting
Linux audit format and mmjsonparse providing the cee-enhanced
syslog format support message modification module.

Wed Oct 24 14:00:00 2012 mtAATTsuse.com
- Update to 7.2.0 (v7-stable) a full structured-logging/CEE enabled
version which provides following features compared to v5-stable:

* greatly improved configuration language – the new language is
much more intuitive than the legacy format. It will also prevent
some typical mistakes simply be not permitting these invalid
constructs. Note that legacy format is still fully supported
(and you can of course do the same mistakes if you use legacy
format).

* greatly improved execution engine – with nested if/then/else
constructs as well as the capability to modify variables during
processing.

* full support for structured logging and project lumberjack/CEE.
this includes everything from being able to create, interpret
and handle JSON-based structured log messages, including the
ability to normalize legacy text log messages.

* more plugins – like support for MongoDB, HDFS, and ElasticSearch
as well as for the kernel’s new structured logging system.

* higher performance – many optimizations all over the code, like
5 to 10 times faster execution time for script-based filters,
enhanced multithreaded TCP input plugin, DNS cache and many more.

Wed Oct 17 14:00:00 2012 fcrozatAATTsuse.com
- Fix build with new systemd location.

Wed Oct 17 14:00:00 2012 mtAATTsuse.com
- Use RFC-5424 conform log format with RFC-3339 high-precision
timestamps by default, removed obsolete rsyslog.early.conf.

Mon Sep 24 14:00:00 2012 andreas.stiegerAATTgmx.de
- prevent installation with other providers of syslog (bnc#780608)

Fri Sep 21 14:00:00 2012 mtAATTsuse.com
- Changed default /etc/rsyslog.conf we install to not use multiple
facilities with the same priority pattern in one statement using
the comma operator. This started to cause a start failure with
rsyslog-6.4.x (bnc#780607) and seems to be a bug in rsyslog.
Upstream report http://bugzilla.adiscon.com/show_bug.cgi?id=358,
switched to use alternative syntax using semicolon separator.

Thu Sep 20 14:00:00 2012 andreas.stiegerAATTgmx.de
- update to 6.4.2 [V6-STABLE] 2012-09-20:
- bugfix: potential abort, if action queue could not be properly
started
- bugfix: remove invalid socket option call from imuxsock
- bugfix: missing support for escape sequences in RainerScript
- bugfix: config validation run did not always return correct
return state

Thu Sep 20 14:00:00 2012 andreas.stiegerAATTgmx.de
- add rsyslog-6.4.1-CheckConnection-no-return-in-nonvoid-function.patch
to fix rsyslog no-return-in-nonvoid-function netstrm.c:258 in
CheckConnection()

Mon Sep 17 14:00:00 2012 mtAATTsuse.com
- Update to 6.4.1 [V6-STABLE] 2012-09-06:
- bugfix: multiple main queues with same queue file name were not
detected. This lead to queue file corruption. While the root
cause is a config error, it is a bug that this important and
hard to find config error was not detected by rsyslog.
- bugfix: “jsonf” property replacer option did generate invalid
JSON in JSON, we have “fieldname”:”value”, but the option
emitted “fieldname”=”value”. Interestingly, this was accepted
by a couple of sinks, most importantly elasticsearch. Now the
correct format is emitted, which causes a remote chance that
some things that relied on the wrong format will break.
Thanks to Miloslav Trmač for the patch
- change $!all-json did emit an empty (thus non-JSON) string if
no libee data was present. It now emits {} and thus valid JSON.
There is a small risk that this may break some things that
relied on the previous inconsistency. Thanks to Miloslav Trmač
for the patch
- bugfix: omusrsmsg incorrect return state & config warning
handling. During config file processing, Omusrmsg often
incorrectly returned a warning status, even when no warning was
present (caused by uninitialized variable). Also, the core
handled warning messages incorrectly, and treated them as
errors. As a result, omusrmsg (most often) could not properly be
loaded. Note that this only occurs with legacy config action
syntax. This was a regression caused by an incorrect merge in to
the 6.3.x codebase.
Thanks to Stefano Mason for alerting us of this bug.
- bugfix: Fixed TCP CheckConnection handling in omfwd.c. Interface
needed to be changed in lower stream classes. Syslog TCP Sending
is now resumed properly. Unfixed, that lead to non-detection of
downstate of remote hosts.

Tue Sep 4 14:00:00 2012 andreas.stiegerAATTgmx.de
- License is (GPL-3.0+ and Apache-2.0), [bnc#778591]
- The template subpackage was never published, remove obsoletes

Fri Aug 31 14:00:00 2012 andreas.stiegerAATTgmx.de
- update to 6.4.0 [BETA] 2012-08-20
This is the first version of the 6.4.0 stable branch.
http://www.rsyslog.com/changelog/
- add rsyslog-6.3.11-glblCheckCnf-no-return-in-nonvoid-function.patch
to fix compiler warning
- rsyslog-6.2.2-link-libestr.patch no longer required
- template functionality was removed upstream

Mon Aug 27 14:00:00 2012 andreas.stiegerAATTgmx.de
- add support for mmnormalize (via liblognorm) and template modules

Tue Jul 3 14:00:00 2012 andreas.stiegerAATTgmx.de
- update to 6.2.2 [V6-stable] 2012-06-13
http://www.rsyslog.com/changelog-for-6-2-2-v6-stable/
- add rsyslog-6.2.2-link-libestr.patch to correctly link against
libestr

Sun Jul 1 14:00:00 2012 andreas.stiegerAATTgmx.de
- updated to 5.8.12 [V5-stable] 2012-06-06
- add small delay (50ms) after sending shutdown message
- support for resolving huge groups
- bugfix: delayble source could block action queue, even if there was
- bugfix: disk queue was not persisted on shutdown, regression of fix to
- bugfix/omudpspoof: problems, including abort, happend when run on
- bugfix: if debug message could end up in log file when forking
- bugfix/tcpflood: sending small test files did not work correctly
- bugfix: potential hang due to mutex deadlock
- bugfix: property PROCID empty instead of proper nilvalue if not present

Mon May 7 14:00:00 2012 mtAATTsuse.com
- Updated to 5.8.11 [V5-stable] 2012-05-03:
- bugfix: ommysql did not properly init/exit the mysql runtime
library this could lead to segfaults. Triggering condition:
multiple action instances using ommysql. Thanks to Tomas
Heinrich for reporting this problem and providing an initial
patch (which my solution is based on, I need to add more code
to clean the mess up).
- bugfix: rsyslog did not terminate when delayable inputs were
blocked due to unvailable sources. Fixes:
http://bugzilla.adiscon.com/show_bug.cgi?id=299
Thanks to Marcin M for bringing up this problem and Andre
Lorbach for helping to reproduce and fix it.
- bugfix: active input in “light delay state” could block
rsyslog termination, at least for prolonged period of time
- bugfix: imptcp input name could not be set. Config directive
was accepted, but had no effect
bugfix: assigned ruleset was lost when using disk queues
This looked quite hard to diagnose for disk-assisted queues,
as the pure memory part worked well, but ruleset info was lost
for messages stored inside the disk queue.
- bugfix: hostname was not requeried on HUP
Thanks to Per Jessen for reporting this bug and Marius
Tomaschewski for his help in testing the fix.
- bugfix: inside queue.c, some thread cancel states were not
correctly reset. While this is a bug, we assume it did have
no practical effect because the reset as it was done was set
to the state the code actually had at this point. But better
fix this…
- Removed obsolete requery hostname patch

Thu Apr 12 14:00:00 2012 mtAATTsuse.com
- Added upstream patchset to requery hostname on HUP (bnc#755857)
- Removed obsolete rsyslog-5.8.7-systemd-log-socket.patch
- Updated to 5.8.10 [V5-stable] 2012-04-05:
- bugfix: segfault on startup if $actionqueuefilename was missing
for disk queue config. Thanks to Tomas Heinrich for the patch.
- bugfix: segfault if disk-queue was started up with old queue file
Thanks to Tomas Heinrich for the patch.
- bugfix: memory leak in array passing output module mode
by 5.8.9 [V5-stable] 2012-03-15:
- added tool to recover disk queue if .qi file is missing
(recover_qi.pl)
Thanks to Kaiwang Chen for contributing this tool
- bugfix: stopped DA queue was never processed after a restart
due to a regression from statistics module.
- added better doc for statsobj interface.
Thanks to Kaiwang Chen for his suggestions and analysis in
regard to the stats subsystem.
by 5.8.8 [V5-stable] 2012-03-05:
- bugfix: omprog made rsyslog abort on startup if not binary to
execute was configured
- bugfix: imklog invalidly computed facility and severity
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313
improves interop with systemd journal

Mon Feb 20 13:00:00 2012 mtAATTsuse.com
- Detect if we have to use the new /run/systemd/journal/syslog
socket instead of the /dev/log under newer systemd versions.
Obsoletes listen.conf installed by systemd (bnc#747871).
- updated to 5.8.7 [V5-stable]:
- bugfix: instabilities when using RFC5424 header fields
Thanks to Kaiwang Chen for the patch
- bugfix: imuxsock did truncate part of received message if it did
not contain a proper date. The truncation occured because we
removed that part of the messages that was expected to be the date.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=295
- bugfix: potential abort after reading invalid X.509 certificate
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290
Thanks to Tomas Heinrich for the patch
- bugfix: stats counter were not properly initialized on creation
- FQDN hostname for multihomed host was not always set to the correct
name if multiple aliases existed. Thanks to Tomas Heinreich for the
patch.
- updated to 5.8.6 [V5-stable]:
- bugfix: missing whitespace after property-based filter was not
detected
- bugfix: $OMFileFlushInterval period was doubled - now using correct
value
- bugfix: ActionQueue could malfunction due to index error
Thanks to Vlad Grigorescu for the patch
- bugfix: $ActionExecOnlyOnce interval did not work properly
Thanks to Tomas Heinrich for the patch
- bugfix: race condition when extracting program name, APPNAME,
structured data and PROCID (RFC5424 fields) could lead to invalid
characters e.g. in dynamic file names or during forwarding (general
malfunction ofthese fields in templates, mostly under heavy load)
- bugfix: imuxsock did no longer ignore message-provided timestamp,
if so configured (the
*default
*). Lead to no longer sub-second
timestamps.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281
- bugfix: omfile returns fatal error code for things that go really
wrong previously, RS_RET_RESUME was returned, which lead to a loop
inside the rule engine as omfile could not really recover.
- bugfix: imfile did invalid system call under some circumstances
when a file that was to be monitored did not exist BUT the state
file actually existed. Mostly a cosmetic issue. Root cause was
incomplete error checking in stream.c; so patch may affect other
code areas.
- bugfix: rsyslogd -v always said 64 atomics were not present
thanks to mono_matsuko for the patch
- Changed /etc/rsyslog.early.conf to just include rsyslog.conf,
fixed spec to use sd-daemon.[ch] from docs on 11.4 only.

Mon Feb 20 13:00:00 2012 mtAATTsuse.com
- Cleaned up the config files a bit, updated comments in config
file, marked the /etc/rsyslog.early.conf obsolete.
Note: rsyslog will be started early/before network using its normal
/etc/rsyslog.conf config file (adopted scripts in syslog-service
package). When any kind of remote logging is in use, then on-disk
queues should be enabled. To start it after the network, please set
the SYSLOG_REQUIRES_NETWORK=yes variable in /etc/sysconfig/syslog
(bnc#728565).

Wed Sep 7 14:00:00 2011 mrueckertAATTsuse.de
- update to 5.8.5 [V5-stable]
- bugfix/security: off-by-two bug in legacy syslog parser,
CVE-2011-3200 bnc#714658
- bugfix: mark message processing did not work correctly
- bugfix: potential hang condition during tag emulation
- bugfix: too-early string termination during tag emulation
- bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup
(msg.c)
- bugfix: fixed incorrect state handling for Discard Action
(transactions) Note: This caused all messages in a batch to be
set to COMMITTED, even if they were discarded.

Wed Aug 24 14:00:00 2011 mtAATTsuse.de
- Adopted to require new syslog-service package on 12.x, that
provides the /etc/init.d/syslog LSB init script and systemd
syslog.service service file. Removed rsyslog.service file
installation from spec file. (fate#311316).

Fri Aug 19 14:00:00 2011 mrueckertAATTsuse.de
- Update to 5.8.4 [V5-stable]
- bugfix: potential misadressing in property replacer
- bugfix: memcpy overflow can occur in allowed sender checkig if
a name is resolved to IPv4-mapped-on-IPv6 address Found by
Ismail Dönmez at suse
- bugfix: potential misadressing in property replacer
- bugfix: MSGID corruption in RFC5424 parser under some
circumstances closes:
http://bugzilla.adiscon.com/show_bug.cgi?id=275
- remove rsyslog-5.8.0-memcpy.patch:
applied upstream
- fix build for older distros:
only buildrequire systemd-devel for newer than 11.4, use systemd
for the others

Fri Aug 19 14:00:00 2011 crrodriguezAATTopensuse.org
- Fix build with new gnutls

Tue Aug 2 14:00:00 2011 ajAATTsuse.de
- Require systemd-devel to follow package split.

Wed Jul 13 14:00:00 2011 mrueckertAATTsuse.de
- drop modules imtemplate and omtemplate, the 2 modules are base
templates for people who want to develop their own modules.

Tue Jul 12 14:00:00 2011 mrueckertAATTsuse.de
- enabled a few more modules which dont pull extra dependencies:
impstats, pmcisconames, pmaixforwardedfrom, pmsnare, pmrfc3164sd,
omruleset, mmsnmptrapd

Tue Jul 12 14:00:00 2011 mrueckertAATTsuse.de
- guard the file list entry for rsyslog.service with
if {with systemd}. Please keep the package working on older
distros.

Tue Jul 12 14:00:00 2011 mrueckertAATTsuse.de
- upstream asked to change the syntax in the default config files
to the new syntax:
old:
*.
*
* # (write to all)
new:
*.
* :omusrmsg:
*
old:
*.
* $channel
new:
*.
* :omfile:$channel
from what i can see we are only affected with:
old:
*.emerg
*
new:
*.emerg :omusrmsg:
*

Tue Jul 12 14:00:00 2011 mrueckertAATTsuse.de
- Updated to 5.8.3 [V5-stable]
- systemd support: set stdout/stderr to null - thx to Lennart for
the patch
- added support for the \":omusrmsg:\" syntax in configuring user
messages
- added support for the \":omfile:\" syntax in configuring user
messages Note: previous outchannel syntax will generate a
warning message. This may be surprising to some users, but it
is quite urgent to alert them of the new syntax as v6 can no
longer support the previous one.

Tue Jun 21 14:00:00 2011 mtAATTsuse.de
- Updated to 5.8.2 [V5-stable] (bnc#701282) a maintenance release,
containing only stability fixes:
- bugfix: problems in failover action handling
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254
- bugfix: mutex was invalidly left unlocked during action processing
At least one case where this can occur is during thread shutdown,
which may be initiated by lower activity. In most cases, this is
quite unlikely to happen. However, if it does, data structures may be
corrupted which could lead to fatal failure and segfault. I detected
this via a testbench test, not a user report. But I assume that some
users may have had unreproducable aborts that were cause by this bug.
- bugfix: memory leak in imtcp & subsystems under some circumstances
This leak is tied to error conditions which lead to incorrect cleanup
of some data structures. [backport from v6]
- bugfix/improvement:$WorkDirectory now gracefully handles trailing
slashes

Tue May 31 14:00:00 2011 ajAATTsuse.de
- Add systemd service file back (bnc#696963).

Fri May 27 14:00:00 2011 mtAATTsuse.de
- Removed touch of obsolete /var/log/boot.log from spec post.

Thu May 19 14:00:00 2011 mrueckertAATTsuse.de
- update to 5.8.1
- bugfix: invalid processing in QUEUE_FULL condition If the the
multi-submit interface was used and a QUEUE_FULL condition
occured, the failed message was properly destructed. However,
the rest of the input batch, if it existed, was not processed.
So this lead to potential loss of messages and a memory leak.
The potential loss of messages was IMHO minor, because they
would have been dropped in most cases due to the queue
remaining full, but very few lucky ones from the batch may have
made it. Anyhow, this has now been changed so that the rest of
the batch is properly tried to be enqueued and, if not
possible, destructed.
- new module mmsnmptrapd, a sample message modification module
This can be useful to reformat snmptrapd messages and also
serves as a sample for how to write message modification
modules using the output module interface. Note that we
introduced this new functionality directly into the stable
release, as it does not modify the core and as such cannot have
any side-effects if it is not used (and thus the risk is solely
on users requiring that functionality).
- bugfix: rate-limiting inside imuxsock did not work 100% correct
reason was that a global config variable was invalidly accessed
where a listener variable should have been used. Also
performance-improved the case when rate limiting is turned off
(this is a very unintrusive change, thus done directly to the
stable version).
- bugfix: $myhostname not available in RainerScript (and no error
message) closes:
http://bugzilla.adiscon.com/show_bug.cgi?id=233
- bugfix: memory and file descriptor leak in stream processing
Leaks could occur under some circumstances if the file stream
handler errored out during the open call. Among others, this
could cause very big memory leaks if there were a problem with
unreadable disk queue files. In regard to the memory leak, this
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=256
- bugfix: doc for impstats had wrong config statements also,
config statements were named a bit inconsistent, resolved that
problem by introducing an alias and only documenting the
consistent statements Thanks to Marcin for bringing up this
problem.
- bugfix: IPv6-address could not be specified in omrelp this was
due to improper parsing of \":\" closes:
http://bugzilla.adiscon.com/show_bug.cgi?id=250
- bugfix: TCP connection invalidly aborted when messages needed
to be discarded (due to QUEUE_FULL or similar problem)
- bugfix: $LocalHostName was not honored under all circumstances
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=258
- bugfix(minor): improper template function call in syslogd.c

Fri Apr 29 14:00:00 2011 idoenmezAATTnovell.com
- Add rsyslog-5.6.5-memcpy.patch: fix overflowing memcpy call in
runtime/net.c

Wed Apr 27 14:00:00 2011 mrueckertAATTsuse.de
- move most of the additional requirements and subpackages into
conditionals so we can switch them on and off by more easily.

Tue Apr 26 14:00:00 2011 mtAATTsuse.de
- Dropped obsolete rsyslog-systemd-integration.bnc656104.diff

Tue Apr 26 14:00:00 2011 mrueckertAATTsuse.de
- dont ship the systemd service file for now.

Sun Apr 24 14:00:00 2011 mrueckertAATTsuse.de
- update to 5.8.0 (v5-tsable)
This is the new v5-stable branch, importing all feature from the
5.7.x versions. To see what has changed in regard to the previous
v5-stable, check the entries for 5.7.x in
/usr/share/doc/packages/rsyslog/ChangeLog.
- bugfix: race condition in deferred name resolution
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=238
Special thanks to Marcin for his persistence in helping to solve this
bug.
- bugfix: DA queue was never shutdown once it was started
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=241
- dropped patch rsyslog-deferred-dns-query-race.diff
included in the release
- refreshed rsyslog-systemd-integration.bnc656104.diff:
most of the patch went upstream just a small chunk left
- fixed the with_dbi conditional, it was using the build_with_relp.
- added a new conditional with_systemd and moved all the systemd
specific things from suse_version >= 1140 to the with_systemd
conditional. the patch line in the preamble should be
unconditional.

Fri Apr 8 14:00:00 2011 mtAATTsuse.de
- bugfix: race condition in deferred name resolution (id=238)
from v5.8.0 candidate.

Thu Mar 24 13:00:00 2011 mtAATTsuse.de
- Updated to 5.6.5 (v5-stable) with following bugfixes:

* bugfix: failover did not work correctly if repeated msg
reduction was on.
affected directive: $ActionExecOnlyWhenPreviousIsSuspended on

* bugfix: omlibdbi did not use password from rsyslog.conf
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203

* bugfix(kind of): tell users that config graph can currently
not be generated
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=232

* bugfix: discard action did not work under some circumstances
fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217
(bnc#676041)

* bugfix: potential abort condition when $RepeatedMsgReduction
were set to on as well as potentially in a number of other places
where MsgDup() was used. This only happened when the imudp input
module was used and it depended on name resolution not yet had
taken place. (bnc#679030)

* bugfix: fixed a memory leak and potential abort condition
this could happen if multiple rulesets were used and some output
batches contained messages belonging to more than one ruleset.
fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226
fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218

* bugfix: memory leak when $RepeatedMsgReduction on was used
bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225
(bnc#681568)
- Merged systemd socket activation support

Wed Feb 2 13:00:00 2011 mtAATTsuse.de
- update to 5.6.3 (v5-stable) with following bugfixes (digest):

* action processor released mememory too early, resulting in
potential issue in retry cases (very unlikely).

* batch processing flagged invalid message as \"bad\" under some
circumstances

* unitialized variable could cause issues under extreme
conditions plus some minor nits.

* batches which had actions in error were not properly retried
in all cases

* imfile did duplicate messages under some circumstances
- enabled plain tcp input, unix socket output, last message
parser and the libdbi module as separate package.
- disabled systemd patch for openSUSE <= 11.3

Thu Jan 20 13:00:00 2011 mtAATTsuse.de
- Improved systemd socket activation support to allow multiple
unix sockets and activation in forking mode (bnc#656197).

Fri Dec 3 13:00:00 2010 mtAATTsuse.de
- update to 5.6.2 (v5-stable) with following bugfixes:

* compile failed on systems without epoll_create1()
Thanks to David Hill for providing a fix.

* atomic increment for msg object may not work correct on
all platforms. Thanks to Chris Metcalf for the patch

* replacements for atomic operations for non-int sized types
had problems. At least one instance of that problem could
potentially lead to abort (inside omfile).
- Increased mark frequency in rsyslog.conf to 1 hour
- Enabled duplicate message reduction in rsyslog.conf to catch
at least buggy programs running amok and writting same message
zillion times until the disk gets out of space (bnc#656197).
- Merged rsyslog-systemd-integration.bnc656104.diff (fuzz=0).

Mon Nov 29 13:00:00 2010 mtAATTsuse.de
- update to 5.6.1
This release addresses a TLS bug, that has been bothering a lot
of users lately. It stops rsyslog from looping, thus disabling
functionality and bearing the risk of unresponsiveness of the
whole system. Other issues have been fixed for imptcp, failing
testbench, segfault on empty templates and failed compile.
For more detailed information, please review the ChangeLog and
http://bugzilla.adiscon.com/show_bug.cgi?id=194,
http://bugzilla.adiscon.com/show_bug.cgi?id=204,
http://bugzilla.adiscon.com/show_bug.cgi?id=206.
- applied systemd integration base patch (without the service and
socket unit files, because we\'ll use same for all syslog damons)
extracted from git master (bnc#656104).

Sat Nov 20 13:00:00 2010 cooloAATTnovell.com
- build with libnet-devel on 11.4

Mon Nov 15 13:00:00 2010 chrisAATTcomputersalat.de
- update to 5.6.0
This release brings all changes and enhancements of the 5.5.x
series to the v5-stable branch.
- bugfix: a couple of problems that imfile had on some platforms,
namely Ubuntu (not their fault, but occured there)
- bugfix: imfile utilizes 32 bit to track offset. Most importantly,
this problem can not experienced on Fedora 64 bit OS (which has
64 bit long\'s!)
- removed obsolete patch
- xconsole-pipe-loop
- rpmlint
- name-repeated-in-summary C Rsyslog

Wed Apr 28 14:00:00 2010 mtAATTsuse.de
- Added $klogConsoleLogLevel 1 to the config, to use same default
[KERNEL_LOGLEVEL in /etc/sysconfig/syslog] as klogd (bnc#593699).
- Improved filter to discard iptables msgs higher err on console,
changed to set default file template instead per file, removed
duplicate filters (bnc#593699).

Tue Apr 27 14:00:00 2010 mtAATTsuse.de
- Applied fix to avoid a tight send-retry loop in case there is
nobody receiving the messages sent to the xconsole pipe
(bnc#597293, http://bugzilla.adiscon.com/show_bug.cgi?id=186).
- Disabled relp support for < 11.3 (librelp is new)
- Fixed to create /var/run/rsyslog in post-install (rpmlint)

Wed Apr 14 14:00:00 2010 mrueckertAATTsuse.de
- dropped install_all_modules_in_lib conditional and all related
code
- new subpackages
- enable RELP support. new depdendency librelp
- enable diagnotic tools.
- enable UDP spoof support. new dependency libnet
- moved module paths to 2 variables defined on top of the spec

Tue Apr 13 14:00:00 2010 mtAATTsuse.de
- Updated to rsyslog version 5.4.0 (v5-stable). This version begins
a new stable series based on the 5.3.x series, which has been
proven rather well in practice. The new 5.4.0 contains fixes for
all known problems. See ChangeLog file for a detailed history.
The main new feature is speed: several optimizations were done,
including support for epoll in tcp listeners.
- Added new lmzlibw.so and omruleset.so to the file list.
- Recompressed original tar.gz source archive using bzip2.

Wed Sep 9 14:00:00 2009 mtAATTsuse.de
- Added read-only RSYSLOGD_NATIVE_VERSION sysconfig/syslog variable,
that is set to the native mode version number for the -c parameter
while every installation and used in the /etc/init.d/syslog script,
except the user overrides this default in RSYSLOGD_COMPAT_VERSION.

Wed Sep 2 14:00:00 2009 mtAATTsuse.de
- Updated to rsyslog version 4.4.1 (v4-stable), a bug-fixing release,
providing some important fixes for issues that have only been
detected after the beta phase. Some of them are serious (like a
segfault when UDP messageforwarding is activated), so users of
4.4.0 are urged to upgrade to this release. Changelog for 4.4.1:

* features requiring Java are automatically disabled if Java
is not present (thanks to Michael Biebl for his help!)

* bugfix: invalid double-quoted PRI, among others in outgoing
messages. This causes grief with all receivers.
Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=147

* bugfix: Java testing tools were required, even if testbench
was disabled. This resulted in build errors if no Java was
present on the build system, even though none of the selected
option actually required Java. (I forgot to backport a similar
fix to newer releases).

* bugfix (backport): omfwd segfault. Note that the orginal (higher
version) patch states this happens only when debugging mode is
turned on. That statement is wrong: if debug mode is turned off,
the message is not being emitted, but the division by zero in
the actual parameters still happens.
- Removed jave2-devel-packages from build requires again

Tue Sep 1 14:00:00 2009 mtAATTsuse.de
- Updated to rsyslog version 4.4.0, the actual stable 4.4.x series.
It provides several bugfixes, performance improvements and new
features: It adds generic network stream server for syslog, the
capability to rebind the send socket of the UDP output section,
allows multiple tcp listeners, multiple recipients in ommail,
new plugins as omprog, improved documentation and testbench
with a config switch. Please review ChangeLog file for details.
- Removed obsolete moddirs patch (included in 4.4.0)
- Added java2-devel-packages to BuildRequires (for test suite)
- Enabled omprog and omtemplate plugins, added them and the
lmstrmsrv plugin to the base-plugins file list.

Mon Apr 20 14:00:00 2009 mtAATTsuse.de
- Improved config file comments about usage of additional
modules provided in separate rsyslog-module packages.
- Enabled GnuTLS (syslog-transport-tls) support module.

Mon Apr 20 14:00:00 2009 mtAATTsuse.de
- Updated to rsyslog 3.20.6 [v3-stable]

Mon Dec 15 13:00:00 2008 mtAATTsuse.de
- Security fix to honor $AllowedSender settings (bnc#457273).
- Security fix [DoS] from 3.20.2 to emit a discard message every
minute only (when DisallowWarning enabled) instead of every time;
this prevernts an attacker can fill the disk (bnc#457273).

Wed Sep 10 14:00:00 2008 schwabAATTsuse.de
- Run autoreconf.

Tue Sep 9 14:00:00 2008 mtAATTsuse.de
- Enabled mail, imfile and imtemplate modules
- Enabled snmp module, packaged as rsyslog-module-snmp
- Added patch to support multiple module directories,
in our case /lib[64]/rsyslog:/usr/lib[64]/rsyslog

Thu Sep 4 14:00:00 2008 mtAATTsuse.de
- initial rsyslog 3.18.3 package