Changelog for kiwi-instsource-4.98.15-1.1.i586.rpm :
Sun Jan 8 13:00:00 2012 msAATTsuse.de - make sure xfs_growfs and xfs_check stay in the initrd (bnc #740073)
Sat Jan 7 13:00:00 2012 msAATTsuse.de - fixed rebuild of rpm database (bnc #740033)
Sat Jan 7 13:00:00 2012 msAATTsuse.de - fixed possible use of uninitialized value in string comparison Date: Wed Jan 4 16:49:34 2012 -0500 - fix gpg signature import The failure is triggered by a behavior change of /usr/lib/rpm/gnupg/dumpsigs on openSUSE 12.1. The updated implementation must be called with a comand line argument, i.e. the gpg file. This fixes bug 739619.
Wed Dec 21 13:00:00 2011 msAATTsuse.de - added SnapshotChunk and SnapshotCount to global space
Wed Dec 21 13:00:00 2011 msAATTsuse.de - fixed creation of filelist for cache selection - fixed creation of cache meta data
Wed Dec 14 13:00:00 2011 msAATTsuse.de - fixed xen initrd inflate/deflate problem. Xen see the bootsplash at the end of the initrd as garbage and refuses to boot. With this patch we skip the bootsplash setup if it\'s xen (bnc #736491)
Wed Dec 7 13:00:00 2011 msAATTsuse.de - fixed udev database transfer. udev stores the database in /run and in /dev/.udev. kiwi did not take care for the information in /run which has a bad impact on systemd waiting for udev events which did not appear (bnc #731457)
Fri Nov 25 13:00:00 2011 msAATTsuse.de - fixed parameter quoting of setupBootLoader() functions (bnc #729315)
Wed Nov 23 13:00:00 2011 msAATTsuse.de - cleaned up KIWICache.pm to critic level 5
Tue Nov 22 13:00:00 2011 msAATTsuse.de - fixed --info/packages output to respect image typed packages sections. getInstallSize() now behaves the same like when the system is actually prepared
Mon Nov 21 13:00:00 2011 msAATTsuse.de - wait a second before rereading the partition table in initGeometry
Mon Nov 21 13:00:00 2011 msAATTsuse.de - apply quoting of .profile contents during build (bnc #729315)
Mon Nov 21 13:00:00 2011 msAATTsuse.de - fixed inode count calculation. Since vmmbytes is the image size in MB, we need to mutiply it to get the count right because inode ratio is in bytes/inode
Mon Nov 21 13:00:00 2011 msAATTsuse.de - fixed call of checkmedia (bnc #730763)
Fri Nov 18 13:00:00 2011 msAATTsuse.de - prevent umount of fstab listed subvolumes before calling systemd. The former sysvinit did not like if another than the root filesystem was mounted at call time but systemd handles this differently and times out when processing the fstab listed entries
Fri Nov 11 13:00:00 2011 msAATTsuse.de - renamed image format vpc to vhd. vhd seems to be the well known name for Microsoft HyperV images (bnc #729857)
Fri Nov 11 13:00:00 2011 msAATTsuse.de - fixed creation of initial aligned partition table in KIWIBoot.pm In SuSE studio the loop device which is normally the target for parted is relinked behind the scene to a virtio device. As result parted now sees a real disk geometry and that induced the bug in kiwi which is not visible if it operates on the file mapped loop device only. Looking at that partition code has turned out that the alignment is broken which in the end broke the repartition process in the first boot of an oem install image. The code is now fixed to work properly on any storage device (bnc #729636)
Thu Nov 10 13:00:00 2011 msAATTsuse.de - fixed parameter quoting in setupBootLoader (bnc #729315)
Wed Nov 9 13:00:00 2011 msAATTsuse.de - make sure partedSectorInit() comes up with an initial value for the start sector if the partition table is empty (bnc #729251)
Wed Nov 9 13:00:00 2011 msAATTsuse.de - changed cache creation. the cache is created from the image description referenced by --init-cache and we prevent the split into packages and patterns and the weird cache template in modules/KIWICache.kiwi. This allows to create cache only image descriptions whose only purpose is to create caches
Tue Nov 8 13:00:00 2011 msAATTsuse.de - removed dead code in iso boot code due to the removal of the swap file support (bnc #728645)
Tue Nov 8 13:00:00 2011 msAATTsuse.de - added options --xattrs and --acls when using rsync
Tue Nov 8 13:00:00 2011 msAATTsuse.de - use mktemp to create tmp dir in setupInstallFlags
Tue Nov 8 13:00:00 2011 msAATTsuse.de - v4.98.15 released
Mon Nov 7 13:00:00 2011 msAATTsuse.de - make sure importFile() stays backward compatible and ensures proper quoting. Also make sure the prefixed variable copy is only created if a prefix was set (bnc #728357)
Mon Nov 7 13:00:00 2011 msAATTsuse.de - switch from tar to rsync based copies. Reason for the change is because tar doesn\'t support file attributes like xattr,acls and fscaps (bnc #728312)
Mon Nov 7 13:00:00 2011 msAATTsuse.de - don\'t create a swap file if no swap partition can be found in the live iso boot code. people complained about the creation of swap files while this is not expected.
Sun Nov 6 13:00:00 2011 msAATTsuse.de - fixed setupNetworkInterfaceS390 qeth_configure execution - added setupNetworkInterfaceS390 to s390 netboot preinit to create the relevant udev rules
Thu Nov 3 13:00:00 2011 msAATTsuse.de - v4.98.14 released
Thu Nov 3 13:00:00 2011 msAATTsuse.de - fixed check for empty variable in shell code
Thu Nov 3 13:00:00 2011 msAATTsuse.de - v4.98.13 released
Thu Nov 3 13:00:00 2011 msAATTsuse.de - setupDefaultGateway uses route but route was not part of the initrd
Thu Nov 3 13:00:00 2011 msAATTsuse.de - fdasdGetPartitionID uses awk but awk was not part of the initrd
Thu Nov 3 13:00:00 2011 msAATTsuse.de - moved hook calls pre/postpartition outside of the block which allows to skip the partition code via the hook script
Wed Nov 2 13:00:00 2011 msAATTsuse.de - fixed repartition code to create an aligned table (bnc #721580)
Mon Oct 31 13:00:00 2011 msAATTsuse.de - setup PXE_IFACE interface only if PXE_IFACE exists in the environment. When using zPXE this variable does not exist
Mon Oct 31 13:00:00 2011 msAATTsuse.de - fixed setupNetworkStatic to write correct interface file
Mon Oct 31 13:00:00 2011 msAATTsuse.de - removed static inittab and securetty overlay files from s390 JeOS template. The setup is done by setupConsole() in preinit
Mon Oct 31 13:00:00 2011 msAATTsuse.de - call runPreinitServices in s390 netboot suse-preinit
Mon Oct 31 13:00:00 2011 msAATTsuse.de - turn pxe PART info tranformation functions into a generic and a fdasd specific function
Mon Oct 31 13:00:00 2011 msAATTsuse.de - added pxePartitionInputS390 suitable for use with fdasd
Mon Oct 31 13:00:00 2011 msAATTsuse.de - added pxeRaidPartitionInputS390 suitable for use with fdasd
Mon Oct 31 13:00:00 2011 msAATTsuse.de - v4.98.12 released
Mon Oct 31 13:00:00 2011 msAATTsuse.de - s390 netboot:
* make sure the VTOC table is created prior to any fdasd call
* make sure searchBusIDBootDevice is called to set the device in $DISK online by a custom DEVICE_INIT command
Mon Oct 31 13:00:00 2011 msAATTsuse.de - added support for custom s390 device init command in the searchBusIDBootDevice function. This is required if the s390 client was not booted by an ipl command but e.g. via zPXE
Sun Oct 30 13:00:00 2011 msAATTsuse.de - fixed migration code:
* fixed creation of URL list from zypper information
* write current schema version (5.3) XML
* fixed creation of KIWISatSolver objects
Sat Oct 29 14:00:00 2011 msAATTsuse.de - added support for Microsoft Hyper-V machine image format . This requires a qemu version which supports the vpc format conversion (fate# 309765)
Sat Oct 29 14:00:00 2011 msAATTsuse.de - fixed migration module to work again. Added 11.4 and 12.1 paths and make sure the global object pointer is there when it is accessed
Fri Oct 28 14:00:00 2011 msAATTsuse.de - v4.98.11 released
Fri Oct 28 14:00:00 2011 msAATTsuse.de - make sure the seq command is part of the initrd used in convertCIDRToNetmask()
Thu Oct 27 14:00:00 2011 msAATTsuse.de - make sure pxeSetupDownloadServer() uses a deadline of 30sec in the ping check. Otherwise it might happen that the server online check fails even though the machine is online Date: Thu Oct 27 10:07:01 2011 -0400 - add unit test to the locator for the createTmpDirectory method, change one of the messages from info to error in the locator, update my e-mail address
Thu Oct 27 14:00:00 2011 msAATTsuse.de - v4.98.10 released
Thu Oct 27 14:00:00 2011 msAATTsuse.de - removed __checkNameValid() checker function and make sure that an arch string as part of the name attribute doesn\'t cause any trouble (bnc #716992)
Thu Oct 27 14:00:00 2011 msAATTsuse.de - v4.98.9 released
Thu Oct 27 14:00:00 2011 msAATTsuse.de - arch check in __checkNameValid is too restrictive
Thu Oct 27 14:00:00 2011 msAATTsuse.de - v4.98.8 released
Thu Oct 27 14:00:00 2011 msAATTsuse.de - fixed quoting of parameters in config.isoclient
Thu Oct 27 14:00:00 2011 msAATTsuse.de - DB: update documentation Date: Thu Oct 27 05:19:20 2011 -0400 change URL in spec file to point to the new homw of the source, github vs. berlios Date: Thu Oct 27 05:13:15 2011 -0400 generated html doc
Thu Oct 27 14:00:00 2011 msAATTsuse.de - reverted commit 620e4e65d05b257e4fc8c6017908e6ba9f75e28e this was a parted bug which is now fixed Date: Wed Oct 26 16:28:46 2011 -0400 add section about cross platform build, expand the introductory section of chapter 4
Wed Oct 26 14:00:00 2011 msAATTsuse.de - v4.98.7 released
Wed Oct 26 14:00:00 2011 msAATTsuse.de - fixed appliance name escaping. One can use any string for the displayname attribute which is now properly escaped via perl\'s quotemeta(). Along with this change the image name attribute must match the pattern [a-zA-Z0-9_\\-\\.] and is not allowed to have the architecture string as part of the name (bnc #716992)
Wed Oct 26 14:00:00 2011 msAATTsuse.de - v4.98.6 released
Wed Oct 26 14:00:00 2011 msAATTsuse.de - libcrc32 module depends on crc32c, but it does not state this dependency explicitely (modules.dep does not contain this information). Since KIWI relies od modules.dep to clean up unused modules in the initrd, this can break module loading. This patch ensures that the module is kept in the initrd and not purged.
Wed Oct 26 14:00:00 2011 msAATTsuse.de - revert back to parted hex id\'s, this reverts commits: 47f8bf758861a3d8cdbc2c188024f423e6ee45db 47f8bf758861a3d8cdbc2c188024f423e6ee45db
Wed Oct 26 14:00:00 2011 msAATTsuse.de - v4.98.5 released
Wed Oct 26 14:00:00 2011 msAATTsuse.de - fixed creation of XML diff in log file
Wed Oct 26 14:00:00 2011 msAATTsuse.de - fixed parted flag setup in KIWILinuxRC code, 12.1 and upstream parted doesn\'t support the hex id\'s like \'set type 0x..\'
Wed Oct 26 14:00:00 2011 msAATTsuse.de - fixed KIWIXMLInfo unit test due to last --info changes
Wed Oct 26 14:00:00 2011 msAATTsuse.de - call createURLList() only on demand. Also provide accessor methods for xml->{urllist} and xml->{urlhash}, don\'t access these object data directly anymore. createURLList() was called in the KIWIXML constructor but changes to the XML might happen at a later point in time. So it makes sense to build the final URL list when access to it is requested
Tue Oct 25 14:00:00 2011 msAATTsuse.de - call setupNetworkStatic in suse-preinit for s390. With this change we write the network configuration as received by the initrd into the system config files below /etc/sysconfig
Tue Oct 25 14:00:00 2011 msAATTsuse.de - added function convertCIDRToNetmask() which allows the interpretation of the CIDR extension like 192.168.1.1/24 to create a standard netmask 255.255.255.0 out of it.
Tue Oct 25 14:00:00 2011 msAATTsuse.de - fixed use of uninitialized value $free in KIWIXML.pm
Tue Oct 25 14:00:00 2011 msAATTsuse.de - make the info module write the imagescan XML into a tmpfile (bnc #726337)
Tue Oct 25 14:00:00 2011 msAATTsuse.de - added log information about cylinder size and count - fixed parted flag setup, 12.1 and upstream parted doesn\'t support the hex id\'s like \'set type 0x..\'
Mon Oct 24 14:00:00 2011 msAATTsuse.de - fixed default boot label selection in syslinux mode
Mon Oct 24 14:00:00 2011 msAATTsuse.de - added support for overlay file and archive listing in info module
Fri Oct 21 14:00:00 2011 msAATTsuse.de - fixed escaping of chown parameters (bnc #725706)
Thu Oct 20 14:00:00 2011 msAATTsuse.de - added update repo path for 11.4 images due to grub bug (bnc #717836)
Wed Oct 19 14:00:00 2011 msAATTsuse.de - check for FSTYPE == btrfs in createOriginSnapshot()
Wed Oct 19 14:00:00 2011 msAATTsuse.de - fixed creation of btrfs origin snapshot. This is now done on first boot of the appliance and not after kiwi prepare
Wed Oct 19 14:00:00 2011 msAATTsuse.de - added baseSetupBtrfsOrigin() function which allows to add an origin snapshot for the image root filesystem contents
Tue Oct 18 14:00:00 2011 msAATTsuse.de - moved README to mkd style
Tue Oct 18 14:00:00 2011 msAATTsuse.de - adapt README style
Tue Oct 18 14:00:00 2011 msAATTsuse.de - v4.98.4 released
Tue Oct 18 14:00:00 2011 msAATTsuse.de - fixed disk device setup in USB stick install mode
Tue Oct 18 14:00:00 2011 msAATTsuse.de - added init=... bootloader setup if systemd is used
Tue Oct 18 14:00:00 2011 msAATTsuse.de - v4.98.3 released
Tue Oct 18 14:00:00 2011 msAATTsuse.de - update German translation .po file
Tue Oct 18 14:00:00 2011 msAATTsuse.de - make sure locale .mo files are created
Tue Oct 18 14:00:00 2011 msAATTsuse.de - update locale headers
Tue Oct 18 14:00:00 2011 msAATTsuse.de - added support for setting up which volume should get the rest free space assigned in a LVM setup. Example:
This will assign the rest space available in the volume group to the LVvar logical volume. rest space means either the size of the \'oem-systemsize\' element or if not set the entire rest space of the disk. If no \'all\' freespace attribute is set in the volume setup, the default volume LVRoot is used as before (bnc #724489)
Mon Oct 17 14:00:00 2011 msAATTsuse.de - added clicfs COW file check prior to mounting it via clicfs_fsck if the check fails we disable persistent writing
Mon Oct 17 14:00:00 2011 msAATTsuse.de - v4.98.2 released
Mon Oct 17 14:00:00 2011 msAATTsuse.de - renamed suse-live-stick to suse-live-usbstick to allow package upgrade again. Details in (bnc #722452)
Mon Oct 17 14:00:00 2011 msAATTsuse.de - prefer systemd over sysvinit if installed
Mon Oct 17 14:00:00 2011 msAATTsuse.de - don\'t use --ignore-cow-errors when using a cow _file_
Mon Oct 17 14:00:00 2011 msAATTsuse.de - make sure setupHybridPersistent() is called before the boot device is busy
Mon Oct 17 14:00:00 2011 msAATTsuse.de - v4.98.1 released
Mon Oct 17 14:00:00 2011 msAATTsuse.de - update XML data to new schema version 5.3
Mon Oct 17 14:00:00 2011 msAATTsuse.de - fixed kiwiRuntimeChecker unit tests
Mon Oct 17 14:00:00 2011 msAATTsuse.de - added a 30 sec timeout to searchBIOSBootDevice
Sat Oct 15 14:00:00 2011 msAATTsuse.de - make searchBiosBootDevice more robust. The function probes for the boot device until found and does not expect all storage devices to be present at call time. There is still a problem in install mode where we need a list of all potential installation devices to be present at a certain point in time. The function waitForIdleEventQueue tries to address this but it\'s not race free Date: Sat Oct 15 11:37:40 2011 -0400 revamp the EC2 chapter, include instructions for using EBS, restructure organization Date: Sat Oct 15 08:46:37 2011 -0400 change ec2region values to match reported regions from ec2-describe-regions comand, AP-Japan -> AP-Northeast, AP-Singapore -> AP-Southeast, change schema version to 5.3 to reflect the value change, implement xml convert from 5.2 to 5.3, update the tests and validation Date: Fri Oct 14 10:53:19 2011 -0400 fix repository path for EC2 repo in 11.3 EC2 example
Fri Oct 14 14:00:00 2011 msAATTsuse.de - xen dom0 support exists only for x86_64 architecture in SLE11 SP2. Therefore we check for this arch in the boot image descriptions
Fri Oct 14 14:00:00 2011 msAATTsuse.de - run \'make valid\' and store XML style changes
Fri Oct 14 14:00:00 2011 msAATTsuse.de - v4.97.5 released
Thu Oct 13 14:00:00 2011 msAATTsuse.de - xen dom0 support exists only for x86_64 architecture in SUSE 12.1. Therefore we check for this arch in the boot image descriptions
Thu Oct 13 14:00:00 2011 msAATTsuse.de - fetchFile does not handle special characters consistently. fetchFile \"some%20file\" with atftp correctly downloads \'some%20file\'. but with ftp curl converts the file name to \'some file\', which is not expected. This patch fixes this and makes the behavior consistent
Wed Oct 12 14:00:00 2011 msAATTsuse.de - fixed use of uninitialized $count variable (bnc #455990)
Wed Oct 12 14:00:00 2011 msAATTsuse.de - don\'t ignore size setup even if the size is smaller than the min size kiwi\'s min size is safe but includes spare space. people who want to overwrite that size can do it but on their own risk
Wed Oct 12 14:00:00 2011 msAATTsuse.de - allow drivers section in the system image which will be added to the drivers section of the selected boot image. This allows to add custom driver information additional to the existing driver selection as part of the boot image (bnc #720933) Author: Marcus Schäfer
Wed Oct 12 14:00:00 2011 msAATTsuse.de - fixed size calculation, use 4% overhead
Wed Oct 12 14:00:00 2011 msAATTsuse.de - removed function waitForUSBDeviceScan and added new function waitForIdleEventQueue which waits for a specific amount of time to check whether new device nodes settle or not. if not the function will return
Tue Oct 11 14:00:00 2011 msAATTsuse.de - removed obsolete files from the suse-11.3 examples
Tue Oct 11 14:00:00 2011 msAATTsuse.de - added preException hook which runs inside the systemExcpetion function to allow further tasks before the exception message is printed and the shell/reboot/wait action happens
Tue Oct 11 14:00:00 2011 msAATTsuse.de - fixed the check for the installed system in the netboot code if the luks encryption is used. The check calls luksOpen with luks_open_can_fail=yes. This means if the wrong passphrase is given the check will proceed with \'update is required\' and does not fail with a reboot exception in luksOpen
Tue Oct 11 14:00:00 2011 msAATTsuse.de - added hooks preswap/postswap which run before the check and creation of the imageSwapDevice. This allows to setup your own swap device handling.
Tue Oct 11 14:00:00 2011 msAATTsuse.de - allow luksOpen to fail if luks_open_can_fail is set - allow map name to be specified in luksClose
Mon Oct 10 14:00:00 2011 msAATTsuse.de - don\'t show the LUKS passphrase as part of the boot log
Mon Oct 10 14:00:00 2011 msAATTsuse.de - fixed vgchange calls to take the volume group name as argument
Mon Oct 10 14:00:00 2011 msAATTsuse.de - fixed multiple display of the same info messages when creating the virtual disk file
Mon Oct 10 14:00:00 2011 msAATTsuse.de - added a workaround for the cylinder counting bug in parted. parted lists two different numbers for the amount of cylinders only one is correct. This patch uses the correct value displayed here. parted only shows different values if called on a loop device
Sun Oct 9 14:00:00 2011 msAATTsuse.de - make suse-live-stick a real image example directory and not a link to the live iso description. This also fixes the upgrade problem between versions were suse-live-stick was a directory and the one were it is provided as a link (bnc #722452)
Fri Oct 7 14:00:00 2011 msAATTsuse.de - v4.97.4 released
Fri Oct 7 14:00:00 2011 msAATTsuse.de - make sure updateOtherDeviceFstab creates the mount point
Fri Oct 7 14:00:00 2011 msAATTsuse.de - activate only volume group stored in $VGROUP, prevent vgscan
Fri Oct 7 14:00:00 2011 msAATTsuse.de - fixed luksOpen to generate unique name for luksroot - fixed luksOpen to stop asking for the passphrase after 3 times - fixed updateOtherDeviceFstab to work in luks and/or RAID env - fixed luksOpen to wait until the mapper created the device - allow luks_pass to be set on the kernel commandline
Thu Oct 6 14:00:00 2011 msAATTsuse.de - DB: rebuild documentation
Thu Oct 6 14:00:00 2011 msAATTsuse.de - fixed race conditions in LOCAL_BOOT=yes code, we have to wait for the $disk device to appear before acting on it Date: Thu Oct 6 11:28:12 2011 -0400 correct attribute name error, some word smithing around description
Thu Oct 6 14:00:00 2011 msAATTsuse.de - removed %pre section from spec, does not work with older distros
Thu Oct 6 14:00:00 2011 msAATTsuse.de - fixed %pre script and filelist
Thu Oct 6 14:00:00 2011 msAATTsuse.de - fixed doc upgrade, added pre-install script for kiwi-doc and also reverted the spec changes for the commits 275a601c and ced64858
Thu Oct 6 14:00:00 2011 msAATTsuse.de - v4.97.3 released
Wed Oct 5 14:00:00 2011 msAATTsuse.de - added support for detecting multiple occurrences of the same MBR ID in searchBIOSBootDevice. Also make sure that this does not happen by writing a default MBR ID of 0xffffffff into the MBR when the bootloader is installed
Wed Oct 5 14:00:00 2011 msAATTsuse.de - rewrote function CDMount into more clear parts, also fixed the waitForUSBDeviceScan which only checks dmesg for a string which doesn\'t appear anymore on newer kernels
Wed Oct 5 14:00:00 2011 msAATTsuse.de - DB: update documentation, better intro page and contributor list
Wed Oct 5 14:00:00 2011 msAATTsuse.de - added support for creating luks encoded squashfs images
Tue Oct 4 14:00:00 2011 msAATTsuse.de - make sure luks devices are evaluated first
Tue Oct 4 14:00:00 2011 msAATTsuse.de - added level sorting for LVM volumes to make sure e.g /opt is mounted before /opt/bob
Tue Oct 4 14:00:00 2011 msAATTsuse.de - fixed spec file, make sure doc files get the %doc macro assigned
Tue Oct 4 14:00:00 2011 msAATTsuse.de - fixed spec file, wrong use of %doc on directory causes the kiwi-doc package to fail the installation on upgrade with \'cpio: rename failed - Is a directory\'
Tue Oct 4 14:00:00 2011 msAATTsuse.de - added mailing list info to README file
Tue Oct 4 14:00:00 2011 msAATTsuse.de - fixed typo and wrote Linus correctly, Oh Oh sorry Linus
Thu Sep 29 14:00:00 2011 msAATTsuse.de - make setupConsole code more clear
Thu Sep 29 14:00:00 2011 msAATTsuse.de - let kiwi exit if a package setup script returns with ecode != 0
Wed Sep 28 14:00:00 2011 msAATTsuse.de - DB: update documentation, new showlicense element
Wed Sep 28 14:00:00 2011 msAATTsuse.de - added support for the new name element as part of the preferences section. This element allows to specify the base name of a license file which is displayed in oem images before the installation happens. It\'s possible to add more sections to display more licenses one after the other. If no such element is specified the default \'license\' and \'EULA\' files are searched to keep the system backward compatible
Wed Sep 28 14:00:00 2011 msAATTsuse.de - added runtime check which makes sure that there are no bogus files included in archives. So far we check for YaST2 license files in /etc/YaST2/licenses
Tue Sep 27 14:00:00 2011 msAATTsuse.de - added support for RHEL splashimage (redhat-logos)
Fri Sep 23 14:00:00 2011 msAATTsuse.de - v4.97.2 released
Fri Sep 23 14:00:00 2011 msAATTsuse.de - fixed typo in perl to bash list dereferencing
Thu Sep 22 14:00:00 2011 msAATTsuse.de - use generic vgchange -an in cleanLoop to make sure the loop maps can be cleaned up even if we can\'t read the name of the volume group from the image
Thu Sep 22 14:00:00 2011 msAATTsuse.de - fixed sysconfig template check to work on RHEL too - fixed init call for RHEL, does not work with run-init program
Thu Sep 22 14:00:00 2011 msAATTsuse.de - added kernel to be installed in rhel-05.4-JeOS template
Thu Sep 22 14:00:00 2011 msAATTsuse.de - fixed use of uninitialized value
Thu Sep 22 14:00:00 2011 msAATTsuse.de - make sure mpath_wait program exists in initrd for RHEL
Thu Sep 22 14:00:00 2011 msAATTsuse.de - fixed missing done flag for info message
Thu Sep 22 14:00:00 2011 msAATTsuse.de - make sure loop module is loaded
Thu Sep 22 14:00:00 2011 msAATTsuse.de - applied following changes to the ppc boot code
* fixed download of md5 file in oem pxe install mode
* make sure iputils is there in oemboot for pxe based installation
* allow installation via the kiwi install image into a ramdisk.
* make sure there is also a lowercase version of cmdline params
* make sure cleanPartitionTable is called before setup
* make sure setupNetworkStatic also brings up the network
Thu Sep 22 14:00:00 2011 msAATTsuse.de - applied following changes to the s390 boot code
* fixed download of md5 file in oem pxe install mode
* make sure iputils is there in oemboot for pxe based installation
* allow installation via the kiwi install image into a ramdisk.
Wed Sep 21 14:00:00 2011 msAATTsuse.de - fixed download of md5 file in oem pxe install mode
Wed Sep 21 14:00:00 2011 msAATTsuse.de - make sure iputils is there in oemboot for pxe based installation
Tue Sep 20 14:00:00 2011 msAATTsuse.de - use ext3 filesystem for the boot partition
Tue Sep 20 14:00:00 2011 msAATTsuse.de - make sure system filesystems like proc and friends are umounted in rhel-preinit
Mon Sep 19 14:00:00 2011 msAATTsuse.de - allow long names in install iso images (-joliet-long) This is related to (bnc #716149)
Mon Sep 19 14:00:00 2011 adrianAATTsuse.de [product] unpack themes in defined order
Fri Sep 16 14:00:00 2011 msAATTsuse.de - v4.97.1 released
Fri Sep 16 14:00:00 2011 msAATTsuse.de - fixed baseSetRunlevel() to work with systemd as well
Fri Sep 16 14:00:00 2011 msAATTsuse.de - don\'t use fuser -k to kill the debug shell, that could cause the kill of other important processes like the fuse clicfs
Fri Sep 16 14:00:00 2011 msAATTsuse.de - allow default path search for --init-cache too
Fri Sep 16 14:00:00 2011 msAATTsuse.de - added SLE11 SP2 SDK repo for s390 boot images in order to receive the kiwi-tools package from there
Tue Sep 13 14:00:00 2011 msAATTsuse.de - allow installation via the kiwi install image into a ramdisk. In order to activate this feature one has to specify the following on the kernel commandline: \'ramdisk=1\' The size of the ramdisk can be set by ramdisk_size= This fixes bug (bnc #717499)
Mon Sep 12 14:00:00 2011 msAATTsuse.de - removed local x86 suse and rhel repo
Thu Sep 8 14:00:00 2011 msAATTsuse.de - fixed addPackages. Only if the requested packages type was \'image\' it\'s allowed to add to \'bootstrap\' if there is no \'image\' typed packages section
Thu Sep 8 14:00:00 2011 msAATTsuse.de - consistency fix for the vmxboot boot image descriptions. all kernels should belong to the same typed packages section
Thu Sep 8 14:00:00 2011 msAATTsuse.de - added new option \'--edit-bootconfig \' and the XML attribute which allows to run a script before the bootloader is actually written. This allows custom changes to the bootloader setup files as requested in (bnc #667950)
Wed Sep 7 14:00:00 2011 msAATTsuse.de - make use of devtmpfs if available
Wed Sep 7 14:00:00 2011 adrianAATTsuse.de - This breaks multi arch medias, we need more complex solution here Revert \"- priorize repositories over fallback architectures\" This reverts commit ce611d35662473365cebdc41172653d287bcaa0e.
Wed Sep 7 14:00:00 2011 msAATTsuse.de - fixed addPackages() function. In case the requested section type cannot be found the function will switch back to the bootstrap section.
Wed Sep 7 14:00:00 2011 msAATTsuse.de - put isoboot kernel-rt package to bootstrap section.
Wed Sep 7 14:00:00 2011 msAATTsuse.de - don\'t show output of pushd / popd in updateMTAB
Wed Sep 7 14:00:00 2011 msAATTsuse.de - create mtab link in kiwi\'s chroot instead of touching an empty file
Wed Sep 7 14:00:00 2011 msAATTsuse.de - fix updateMTAB() to create a /etc/mtab symlink if /proc/self/mounts exists. Otherwise leave /etc/mtab untouched
Mon Sep 5 14:00:00 2011 msAATTsuse.de - use the same version of suse-dump for ppc and s390 arch
Mon Sep 5 14:00:00 2011 msAATTsuse.de - the by-id device names can contain the \':\' sign which causes trouble when kiwi uses the same sign as data separator. This patch solves the problem for the evaluation of the instItems array in the suse-dump code
Mon Sep 5 14:00:00 2011 msAATTsuse.de - add priority to the repository to the boot config of RHEL iso images. This will resolve the conflicts with the kiwi-tools package while creating the boot image.
Mon Sep 5 14:00:00 2011 msAATTsuse.de - added support for vmxboot for RHEL 5.4. Thanks to Praveen
Fri Sep 2 14:00:00 2011 msAATTsuse.de - v4.95.4 released
Fri Sep 2 14:00:00 2011 msAATTsuse.de - fixed warning when checking for rpc_pipefs (bnc #711389)
Fri Sep 2 14:00:00 2011 msAATTsuse.de - fixed checkLVMbind() to search for the lvm flag on the disk first. Only if the disk has that flag we search for the LVM devices.
Thu Sep 1 14:00:00 2011 msAATTsuse.de - last commit causes a regression for non split types.
Wed Aug 31 14:00:00 2011 adrianAATTsuse.de - product build: avoid multiple handling of debug packages
Wed Aug 31 14:00:00 2011 adrianAATTsuse.de - priorize repositories over fallback architectures
Tue Aug 30 14:00:00 2011 msAATTsuse.de - more readable \'kiwi --list\' output
Tue Aug 30 14:00:00 2011 msAATTsuse.de - make sure $prio variable is initialized empty for each repo validation (bnc #714927)
Tue Aug 30 14:00:00 2011 msAATTsuse.de - fixed inline description of addRepository() function
Sat Aug 27 14:00:00 2011 msAATTsuse.de - v4.95.3 released
Sat Aug 27 14:00:00 2011 msAATTsuse.de - fixed BuildArch setup for sle11 build
Sat Aug 27 14:00:00 2011 msAATTsuse.de - v4.95.2 released
Sat Aug 27 14:00:00 2011 msAATTsuse.de - DB: rebuild schema documentation
Sat Aug 27 14:00:00 2011 msAATTsuse.de - DB: rebuild documentation
Sat Aug 27 14:00:00 2011 msAATTsuse.de - DB: update documentation concerning the new imageinclude attribute
Sat Aug 27 14:00:00 2011 msAATTsuse.de - added a new attribute to the element called \'imageinclude\', a boolean. The code treats the attribute as having a \"false\" default value. When set to true (for using zypper package manager only at this point) the specified repository is added to the image being created, thus the repo is available to install additional packages or upgrade existing packages from within the running image.
Sat Aug 27 14:00:00 2011 msAATTsuse.de - cleanup XML data from example image descriptions by the result of the kiwi XML pretty printer
Sat Aug 27 14:00:00 2011 msAATTsuse.de - added RHEL/CentOS 5.x. compatible repodata for rhel-repo
Sat Aug 27 14:00:00 2011 msAATTsuse.de - fixed %post for kiwi-templates. %post has to use the same ifarch selection as used by the %package section
Fri Aug 26 14:00:00 2011 msAATTsuse.de - v4.95.1 released
Wed Aug 24 14:00:00 2011 msAATTsuse.de - better version of baseSetupBootLoaderCompatLinks() which hardlinks the files to be able to access them from within the cpio archive
Wed Aug 24 14:00:00 2011 msAATTsuse.de - make sure to have some spare space in filesystem images
Wed Aug 24 14:00:00 2011 msAATTsuse.de - don\'t remove data from initial boot partition
Wed Aug 24 14:00:00 2011 msAATTsuse.de - call setupBootPartition() only if systemIntegrity is != fine - clean up setupBootPartition, create mount points inside the initrd - clean up netboot code, setup bootid before mountSystem and let setupBootPartition do the setup of the boot contents
Wed Aug 24 14:00:00 2011 msAATTsuse.de - added support for pxe luks encrypted images
Wed Aug 24 14:00:00 2011 msAATTsuse.de - break up long code line into two
Wed Aug 24 14:00:00 2011 msAATTsuse.de - added compat link menu.lst -> grub.conf, required by RHEL - added function baseSetupBootLoaderCompatLinks() which can be used to create the /usr/share/grub link to the stage files which kiwi expects in /usr/lib/grub. RHEL installs them in /usr/share/grub
Tue Aug 23 14:00:00 2011 msAATTsuse.de - added parted 1.8.7 to RHEL5.4 repo
Tue Aug 23 14:00:00 2011 msAATTsuse.de - fixed boot code: explicitly wait until the background job showing the progress information has finished
Tue Aug 23 14:00:00 2011 msAATTsuse.de - let atftpProgress() read output directly so there is just one job - fixed fetchFile(): enable progress only for block devices, without this it showed the progress for md5 and other files when the first image download failed. - fixed fetchFile(): fbiterm does not work with serial console, added fallback when it fails - fixed fetchFile(): loadCode value from the background job is returned correctly now
Tue Aug 23 14:00:00 2011 msAATTsuse.de - changed the image size calculation to leave not too much of free space. In case of a filesystem based image as less free space as possible is added. In case of a disk image we make sure to have ~100MB of free space. If a single boot partition is required we make sure to have min 150M to allow proper kernel updates
Tue Aug 23 14:00:00 2011 msAATTsuse.de - make sure atftpProgress() finishes _after_ the atftp process has concluded the download, related to (bnc #713167)
Tue Aug 23 14:00:00 2011 msAATTsuse.de - use $imageBlkSize as parameter for atftpProgress() - take care for handling of re-sent blocks in atftpProgress() - fixed atftp error output handling $TRANSFER_ERRORS_FILE vs. /tmp/atftp_trace - fixed atftp blocksize detection - with multicast the block number 1 does not have to be at the beginning
Tue Aug 23 14:00:00 2011 msAATTsuse.de - added kiwi-media-requires meta package which recommends all packages which should be part of the distribution DVD
Tue Aug 23 14:00:00 2011 msAATTsuse.de - rpmlint doesn\'t like empty files
Tue Aug 23 14:00:00 2011 msAATTsuse.de - added atftpProgress() function which implements the progress information for atftp by watching the atftp trace output. atftp seeks in the output stream which forbids the use of pipes for the progress information (bnc #713167)
Mon Aug 22 14:00:00 2011 msAATTsuse.de - make sure fribidi stays installed in netboot. It\'s required for the fbiterm based progress information (bnc #713173)
Mon Aug 22 14:00:00 2011 msAATTsuse.de - don\'t use pipes in combination with atftp (bnc #713167)
Mon Aug 22 14:00:00 2011 msAATTsuse.de - fixed typo, missing \'\ \' in info output
Fri Aug 19 14:00:00 2011 msAATTsuse.de - v4.94.3 released
Fri Aug 19 14:00:00 2011 msAATTsuse.de - don\'t remove netcfg from boot images. This would remove the etc/hosts file which might be required. Along with this change also fixed the cleanupResolvConf() function which has to reset the needResolvConf and needHosts flags in order to prevent a deletion at a later point in time (bnc #713158)
Fri Aug 19 14:00:00 2011 msAATTsuse.de - don\'t call restoreCDRootData() and restoreSplitExtend() inside the global destructor of the KIWIImageCreator. If the functions are applied to the creation of a boot image it leads to errors because they are designed to operate on the system image root tree
Fri Aug 19 14:00:00 2011 msAATTsuse.de - removed broken state setup in KIWILog which was used to detect whether we need a CR when printing the line or not. All that sucked and caused mystery empty lines in the log
Fri Aug 19 14:00:00 2011 msAATTsuse.de - make sure loop maps are closed before installing grub. Also changed the way grub is called. We are creating a file with the commands first and then call grub ... --batch < file. It makes the code more readable and also allows to include the commands as part of the log file
Thu Aug 18 14:00:00 2011 msAATTsuse.de - fixed zero timeout value handling in syslinux. A value of zero disables the timeout so we set the smallest possible value in that case which is 1/10sec
Thu Aug 18 14:00:00 2011 msAATTsuse.de - increased amount of spare space 1.1 -> 1.5
Thu Aug 18 14:00:00 2011 msAATTsuse.de - fixed evaluation of which output
Thu Aug 18 14:00:00 2011 msAATTsuse.de - apply check for partitioner capabilities only for boot image types which actually use a partitioner; netboot and oemboot
Wed Aug 17 14:00:00 2011 msAATTsuse.de - added pxe image type for s390 JeOS template
Wed Aug 17 14:00:00 2011 msAATTsuse.de - added more useful repo path for s390 netboot
Wed Aug 17 14:00:00 2011 msAATTsuse.de - added support for netboot on s390, still _experimental_ !
Wed Aug 17 14:00:00 2011 msAATTsuse.de - changed ddn() function to also check for the \'_\' separator between the device and partition name
Wed Aug 17 14:00:00 2011 msAATTsuse.de - fixed this path evaluation in build operation mode
Wed Aug 17 14:00:00 2011 msAATTsuse.de - allow boottimeout of 0sec, also set the same default timeout of 10sec for the ext|syslinux setup
Tue Aug 16 14:00:00 2011 msAATTsuse.de - reduced amount of spare space 1.5 -> 1.1
Tue Aug 16 14:00:00 2011 msAATTsuse.de - fixed suse-11.4/suse-min-gnome package list
Fri Aug 12 14:00:00 2011 msAATTsuse.de - v4.94.2 released
Thu Aug 11 14:00:00 2011 msAATTsuse.de - fixed default label text for ext|syslinux setup
Thu Aug 11 14:00:00 2011 msAATTsuse.de - fixed vfat boot partition id lookup in setupBootPartition()
Thu Aug 11 14:00:00 2011 msAATTsuse.de - make sure the text message file isolinux.msg is created in case of a sys|extlinux based virtual disk image
Thu Aug 11 14:00:00 2011 msAATTsuse.de - make sure loader variable is initialized as early as possible also make sure .profile is loaded inside the initialize() function. This allows to setup loader by the value of the kiwi_bootloader variable in an early phase
Wed Aug 10 14:00:00 2011 msAATTsuse.de - make sure the which command is part of the initrd
Wed Aug 10 14:00:00 2011 msAATTsuse.de - don\'t configure a graphics boot screen in grub if no bootscreen picture data is available
Wed Aug 10 14:00:00 2011 msAATTsuse.de - allow init=/path/to/program option for kiwi images
Tue Aug 9 14:00:00 2011 msAATTsuse.de - in 12.1 the sysconfig.kernel file has been changed into a sysconfig.kernel-mkinitrd file.
Tue Aug 9 14:00:00 2011 msAATTsuse.de - suppress error message on stat evaluation for rpc_pipefs
Mon Aug 8 14:00:00 2011 msAATTsuse.de - use getExecPath() to locate parted binary, also allow alternative location of parted inside the linuxrc code
Mon Aug 8 14:00:00 2011 msAATTsuse.de - When the Boot image\'s repositories are updated/reconfigured, the priority and alias information is chopped off. This patch makes sure the priority information is retained.
Mon Aug 8 14:00:00 2011 msAATTsuse.de - use getExecPath() to find the grub binary. Along with this change the extraction of the grub binary from the initrd has been removed. That binary never was called. - allow alternative location for the grub binary inside the linuxrc boot code
Fri Jul 29 14:00:00 2011 msAATTsuse.de - cleanup splash directory in case of call interruption
Fri Jul 29 14:00:00 2011 msAATTsuse.de - v4.94.1 released
Fri Jul 29 14:00:00 2011 msAATTsuse.de - added support for download and verification progress information for pxe (netboot) images (bnc #708711)
Thu Jul 28 14:00:00 2011 msAATTsuse.de - setup INITRD_MODULES for ppc correctly as ipr module is not included there by default. - includes only needed scsi and network modules for ppc based boot images
Thu Jul 28 14:00:00 2011 msAATTsuse.de - setup serial console on JS21 ppc blade with correct baud rate
Thu Jul 28 14:00:00 2011 msAATTsuse.de - added support for dmraid fake-raid controllers (bnc #708712)
Thu Jul 28 14:00:00 2011 msAATTsuse.de - use the udev by-id path as device for the installation in suse-dump instead of the the standard unix device names (bnc #708712)
Thu Jul 28 14:00:00 2011 msAATTsuse.de - added support for repo priority for the yum package manager backend
Wed Jul 27 14:00:00 2011 msAATTsuse.de - fixed splash setup on recreation of the splash.install.gz initrd
Wed Jul 27 14:00:00 2011 msAATTsuse.de - added function to check for boot image creation and call setupSplash only if we are building a boot image - fixed splash creation for iso images
Wed Jul 27 14:00:00 2011 msAATTsuse.de - allow bootwait post dump action in combination with other post dump action
Tue Jul 26 14:00:00 2011 msAATTsuse.de - increased performance of the splash creation. Instead of ripping the splash information out from the created initrd cpio archive, the splash files are now obtained from the unpacked tree and stored in a .spl file for appending it later to the final initrd (bnc #708357)
Tue Jul 26 14:00:00 2011 msAATTsuse.de - fixed xsl 3.8 to 3.9 conversion, oem-align-partition,oem-dumphalt and oem-inplace-recovery were not handled correctly
Tue Jul 26 14:00:00 2011 msAATTsuse.de - DB: fixed schemaversion value in documentation
Mon Jul 25 14:00:00 2011 msAATTsuse.de - v4.93.3 released
Mon Jul 25 14:00:00 2011 msAATTsuse.de - fixed deviceDisks setup in suse-dump. The code there should check if imageDiskDevice has a value otherwise the sed call will fail with an invalid expression
Fri Jul 22 14:00:00 2011 msAATTsuse.de - v4.93.2 released
Thu Jul 21 14:00:00 2011 msAATTsuse.de - fixed config dir path serach in --build mode
Thu Jul 21 14:00:00 2011 msAATTsuse.de - added patch for genName creation. The generated name is now unique according to the repository name. This allows to use the cache zypper creates per repository again
Wed Jul 20 14:00:00 2011 msAATTsuse.de - DB: use the 2 part version number for the documentation
Wed Jul 20 14:00:00 2011 msAATTsuse.de - fixed .newrelease to just increase the release part of the new kiwi version string by one
Wed Jul 20 14:00:00 2011 msAATTsuse.de - DB: rebuild images only if the .fig has changed
Tue Jul 19 14:00:00 2011 msAATTsuse.de - fixed evaluation of AATTUmountStack. There were some mount points still active if $main::global->mount() is called multiple times each mount() call causes a reset to the AATTUmountStack which means some umount information got lost
Mon Jul 18 14:00:00 2011 adrianAATTsuse.de - fix catalog handling failure on apple style medias
Mon Jul 18 14:00:00 2011 adrianAATTsuse.de - do not try to run boot loader setup code when no boot loader exists
Fri Jul 15 14:00:00 2011 msAATTsuse.de - v4.93.1 released
Fri Jul 15 14:00:00 2011 msAATTsuse.de - fixed installstick creation if sys|extlinux bootloader is used. Also fixed size setup of install stick. Problem here was that the uncompressed size of the raw install file was used and not the compressed size which ends up in a too big installstick image
Fri Jul 15 14:00:00 2011 msAATTsuse.de - added support for hybrid installiso media. In order to create the hybrid the attribute bootloader must be either set to syslinux or extlinux
Thu Jul 14 14:00:00 2011 msAATTsuse.de - moved zypper version check outside of the loop. It\'s enough to check this one time
Thu Jul 14 14:00:00 2011 msAATTsuse.de - improve the OpenNebula example. I recently created a separate package for the OpenNebula Web-UI server (sunstone) and with the package \"cleanup/separation\" from the main opennebula package showing how to use the Web-UI is easier now.
Thu Jul 14 14:00:00 2011 msAATTsuse.de - use the --one-file-system option for tar when copying the system image tree. This prevents the copy of files existing beyond the local filesystem (bnc #705717)
Thu Jul 14 14:00:00 2011 msAATTsuse.de - added log information if a hijacked command is called. That check only works inside the studio environment were a hijacked command has \'cmd\'_real replacement.
Thu Jul 14 14:00:00 2011 msAATTsuse.de - fixed use of uninitialized value $ENV{\'HOME\'} (bnc #705717)
Thu Jul 14 14:00:00 2011 msAATTsuse.de - added %post script for kiwi-templates which removes old JeOS template directories for distros we no longer support a JeOS image from.
Wed Jul 13 14:00:00 2011 msAATTsuse.de - cleaned up relocateCatalog calls which does not receive a parameter anymore. Also fixed return value of fixCatalog function
Wed Jul 13 14:00:00 2011 msAATTsuse.de - make sure relocateCatalog and fixCatalog is called for SuSE installation media (bnc #705208)
Wed Jul 13 14:00:00 2011 msAATTsuse.de - added README file to make github happy
Mon Jul 11 14:00:00 2011 msAATTsuse.de - use predefined set of configuration settings if a bootcd without system image was requested. The initrd itself doesn\'t contain further XML information so we set vga to normal and disabled the boot menu along with a boot timeout of zero seconds (immediate boot)
Fri Jul 8 14:00:00 2011 msAATTsuse.de - v4.92.2 released
Wed Jul 6 14:00:00 2011 msAATTsuse.de - activate NFS locking for nfsroot systems. This means the mount call doesn\'t use -o nolock anymore
Wed Jul 6 14:00:00 2011 msAATTsuse.de - make sure rpc_pipefs is mounted if /var/lib/nfs/rpc_pipefs exists - force NFS version 3 for NFSROOT setup. In that case v4 features are not required
Tue Jul 5 14:00:00 2011 msAATTsuse.de - added check if reading the md5 file was successful (bnc #703829)
Tue Jul 5 14:00:00 2011 msAATTsuse.de - changed order of resize/check operation to check/resize
Fri Jul 1 14:00:00 2011 msAATTsuse.de - v4.92.1 released
Thu Jun 30 14:00:00 2011 msAATTsuse.de - added sle10 backward compatibility patches for losetup calls and partedGetPartitionID function. losetup in sle10 doesn\'t know about the --find option and parted in sle10 has a different machine (-m) output
Thu Jun 30 14:00:00 2011 msAATTsuse.de - make sure to unset the cacheDir if selectCache failed
Thu Jun 30 14:00:00 2011 msAATTsuse.de - removed -t option when mounting the squashfs image container in suse-dump. let libuuid decide that
Thu Jun 30 14:00:00 2011 msAATTsuse.de - fixed typo, check for dialog program happened twice
Wed Jun 29 14:00:00 2011 msAATTsuse.de - fixed and cleaned up disk size setup. There are two new functions __initDiskSize() and __updateDiskSize() which are used to create an initial disk size value and an update function if there are conditions which requires to increase the disk size. That actions are now also part of the kiwi log file
Wed Jun 29 14:00:00 2011 msAATTsuse.de - fixed setupOverlay() in KIWIImage.pm to write back possible XML changes into the overlay tree to stay persistent in the cow file
Wed Jun 29 14:00:00 2011 msAATTsuse.de - fixed cleanup of KIWIBoot instances in KIWIImageCreator
Wed Jun 29 14:00:00 2011 msAATTsuse.de - increased chunk size in createSnapshotMap(). This increased the performance of image caches a lot
Tue Jun 28 14:00:00 2011 msAATTsuse.de - allow firstboot and autoyast service to be enabled together (bnc #700105)
Tue Jun 28 14:00:00 2011 msAATTsuse.de - remove use of hardcoded path for the mksquashfs program by using the KIWILocator::getExecPath() method
Tue Jun 28 14:00:00 2011 msAATTsuse.de - added quoting of special characters for kiwi_oemtitle (bnc #702044)
Mon Jun 27 14:00:00 2011 msAATTsuse.de - added support for pxe buffered write on destination device in fetchFile() function used for netboot images. By default a chunk size of 4k is used
Mon Jun 27 14:00:00 2011 msAATTsuse.de - added network functions for s390 pxeboot. New functions are setupNetworkInterfaceS390, setupNetworkStatic, setupDefaultGateway setupDNS. Normally the pxe boot on x86 expects a DHCP server to provide all the required network services but on s390 pxe boot works together with a parm file containing that information which is evaluated by the new functions.
Fri Jun 24 14:00:00 2011 msAATTsuse.de - fixed evaluation of buildtype in createImage(). There were some places which did not reference the build type as it is stored in the XML object. This could lead to the use of an uninitialized value if no primary type was set in the XML description and no type was explicitly selected
Wed Jun 22 14:00:00 2011 msAATTsuse.de - changed 01-network.sh preinit script for s390 templates to use the same variable names as provided by the parm file when using the standard yast based installation
Tue Jun 21 14:00:00 2011 msAATTsuse.de - added function includeKernelParametersLowerCase() which converts all cmdline paramters to lowercase variables
Mon Jun 20 14:00:00 2011 msAATTsuse.de - systemd-sysvinit creates a symlink from \'/bin/systemd\' to \'/sbin/init\'. Unfortunately kiwi linuxrc tries to check for the file permissions which leads to a false positive rebootException (bnc #700603)
Mon Jun 20 14:00:00 2011 msAATTsuse.de - changed __getBootSize() function so that it multiplies the calculated minimum boot space by 3 to allow proper kernel updates (bnc #698161)
Mon Jun 20 14:00:00 2011 msAATTsuse.de - fixed thisPath() evaluation. When in create or upgrade mode the function did not use the value of the main::Prepare lookup file
Mon Jun 20 14:00:00 2011 msAATTsuse.de - Apply some clean up to the recently submitted OpenNebula example. I made some changes to the packaging in OBS which allows me to simplify the image configuration.
Thu Jun 16 14:00:00 2011 msAATTsuse.de - fixed build on Centos/Redhat, recommended packages like jing or zypper does not exist there so we had to check the distro in that case
Thu Jun 16 14:00:00 2011 msAATTsuse.de - fixed the patternType validation bug reported by John Lund on the users list. The patch also adds a new test case xml file for the KIWIXMLValidator unit test.
Thu Jun 16 14:00:00 2011 msAATTsuse.de - added a new example for 11.3, 11.4, and 12.1. This example demonstrates the use of Kiwi to create cloud setup images and a guest images for clouds based on the OpenNebula infrastructure.
Sun Jun 12 14:00:00 2011 msAATTsuse.de - v4.91.2 released
Sun Jun 12 14:00:00 2011 msAATTsuse.de - DB: fixed typo in URI documentation
Fri Jun 10 14:00:00 2011 adrianAATTsuse.de - we need to go back to SHA1 for SLE 11 for now, zypp is not working with 256 yet.
Fri Jun 10 14:00:00 2011 msAATTsuse.de - use hardlink instead of copy to create the init file in the initrd cpio archive
Thu Jun 9 14:00:00 2011 adrianAATTsuse.de - make sure options for LogFile and RootTree are handled before createInstSource() is called
Thu Jun 9 14:00:00 2011 adrianAATTsuse.de - switch to 11.1 PDB branch
Thu Jun 9 14:00:00 2011 adrianAATTsuse.de - fix plugin to become usable with current kiwi code
Wed Jun 8 14:00:00 2011 msAATTsuse.de - remove the call to sax2 in the 11.3 vm guest example, sax2 is no longer part of 11.3 and later as the X-server is self configuring. Also added code to allow the firstboot sequence to be initiated. While this particular example does not use the firstboot mechanism, someone basing their build of the example and trying to get firstboot to work would be hard pressed to find why it is not working.
Tue Jun 7 14:00:00 2011 msAATTsuse.de - changed kiwi version number from a two part version into a three part version number: v4.91.1. The major and minor part of the version will not change with bugfix releases. The following rules should apply to the version number: major.minor.release. major change might include incompatible changes. minor change includes features and schema version updates. release change includes any kind of bugfixes
Tue Jun 7 14:00:00 2011 msAATTsuse.de - update LICENSE file to latest version of GPLv2
Tue Jun 7 14:00:00 2011 adrianAATTsuse.de - new perl complains about implicit parentheses
Mon Jun 6 14:00:00 2011 msAATTsuse.de - added appliances that are not referenced in docbook and are intended to demonstrate image building and appliances in a broader view into the doc/examples/extras directory
Mon Jun 6 14:00:00 2011 msAATTsuse.de - don\'t use a fixed value for the size of the boot partition. The size among others depends on how many kernels were installed. Thus a fixed value is always wrong. The new function __getBootSize() is used to check the actual size of the boot/ * area and this value is used to create the boot partition if required. In case of an oem image the re-creation of the boot partition happens based on the original boot partition size (bnc #698233)
Mon Jun 6 14:00:00 2011 msAATTsuse.de - drop RPMQ dependency, package does not exist, but module is provdided already by inst-source-utils.
Mon Jun 6 14:00:00 2011 msAATTsuse.de - DB: update documentation
Mon Jun 6 14:00:00 2011 msAATTsuse.de - added openSUSE 12.1 template and boot image descriptions - removed openSUSE 11.1 and 11.2 docs plus template and boot image descriptions
Mon Jun 6 14:00:00 2011 msAATTsuse.de - fixed location of squashfs in drivers section for sle10
Mon Jun 6 14:00:00 2011 msAATTsuse.de - fixed ELOG_ * setup for ppc architecture. We use the hvc console for ppc and tty for all others
Sat Jun 4 14:00:00 2011 msAATTsuse.de - activate build of kiwi-desc-netboot for ppc in spec file
Sat Jun 4 14:00:00 2011 msAATTsuse.de - added support for pxe images on ppc architecture
Fri Jun 3 14:00:00 2011 msAATTsuse.de - added squashfs in drivers section of SLE10 boot image descriptions
Fri Jun 3 14:00:00 2011 msAATTsuse.de - v4.91 released
Wed Jun 1 14:00:00 2011 msAATTsuse.de - added option -f to \'prove\' in order to show failed unit tests
Wed Jun 1 14:00:00 2011 msAATTsuse.de - call the XML pretty printer when kiwi writes back the XML description to the unpacked image tree. The result is easier to read
Wed Jun 1 14:00:00 2011 msAATTsuse.de - moved requirement back to genisoimage, after checking the code
Wed Jun 1 14:00:00 2011 msAATTsuse.de - fixed build: unit testing requires iso and filesystem tools to be present in the buildsystem - fixed spec file: genisoimage is set as required but kiwi uses growisofs in the code which is provided by dvd+rw-tools
Wed Jun 1 14:00:00 2011 msAATTsuse.de - fixed unit testing ktLog.pm, some functions from the real KIWILog module were missing in ktLog.pm
Tue May 31 14:00:00 2011 msAATTsuse.de - allow username and password to be transfered via updateDescription / __updateDescriptionFromChangeSet
Tue May 31 14:00:00 2011 msAATTsuse.de - added option --start-sector to kiwi. This allows to influence the default start sector 2048 to be another value e.g. 32 for the old style disk layout.
Tue May 31 14:00:00 2011 msAATTsuse.de - fixed call of cleanup functions for KIWIBoot objects
Tue May 31 14:00:00 2011 msAATTsuse.de - really fixed setupConsole to remove the ttyS0 console if no ttyS0 device exists (bnc #695948)
Tue May 31 14:00:00 2011 msAATTsuse.de - fixed build: Added zypper to BuildRequires. This is needed in order to make the unit test run happy
Fri May 27 14:00:00 2011 msAATTsuse.de - v4.90 released
Fri May 27 14:00:00 2011 msAATTsuse.de - DB: update documentation, typo in ec2 docs
Fri May 27 14:00:00 2011 msAATTsuse.de - eliminate use of global variable: XMLChangeSet
Thu May 26 14:00:00 2011 msAATTsuse.de - DB: update documentation
Thu May 26 14:00:00 2011 msAATTsuse.de - don\'t store DOM tree references in XML changeset - don\'t create a new KIWICommandLine object in KIWICache
Thu May 26 14:00:00 2011 msAATTsuse.de - eliminate use of global variable: OverlayRootTree
Thu May 26 14:00:00 2011 msAATTsuse.de - eliminate use of global variables:
* BootVMSystem
* BootVMSize
* StripImage
* ProfilesOrig
* PrebuiltBootImage
* ISOCheck
* CheckKernel
* LVM
* GrubChainload
* FatStorage
Thu May 26 14:00:00 2011 msAATTsuse.de - fix the problem with an improper exit status on test failure. We now use prove (part of Perl) to execute the unit tests. Prove generates the proper exit status upon test failure.
Wed May 25 14:00:00 2011 msAATTsuse.de - fixed spec file: The functionality provided with the kiwi-desc-usbboot package has moved into a new technology which is not provided by another package. Therefore the wrong provides entry was removed.
Wed May 25 14:00:00 2011 msAATTsuse.de - enhanced setupConsole to remove the ttyS0 console if no ttyS0 device exists (bnc #695948)
Wed May 25 14:00:00 2011 msAATTsuse.de - fixed setupConsole() if search string appears as comment
Wed May 25 14:00:00 2011 msAATTsuse.de - use -t squashfs to mount the installation image. This works around the problem if libuuid doesn\'t know the squashfs signature
Wed May 25 14:00:00 2011 msAATTsuse.de - eliminate use of global variables: ListXMLInfoSelection and RootTree
Wed May 25 14:00:00 2011 adrianAATTsuse.de - minor cleanup: remove -C parameter for 12.1 style medias, -D is enough
Wed May 25 14:00:00 2011 msAATTsuse.de - fixed bootloader setup if split image type is used
Wed May 25 14:00:00 2011 msAATTsuse.de - eliminate use of global variable: LogFile - cleaned up init() function, removed redundant code and moved the listXMLInfo code into the main operations block
Wed May 25 14:00:00 2011 msAATTsuse.de - adapt unit tests due to last KIWIXML ctor code changes
Tue May 24 14:00:00 2011 msAATTsuse.de - eliminate global variable: Destination - fixed backtrace() output in debug mode, show only latest trace level the other trace levels are kept for further debugging
Tue May 24 14:00:00 2011 msAATTsuse.de - eliminate use of global variable: ImageDescription - pass commandline object reference (cmdL) to KIWIXML objects and from there to KIWIURL objects.
Tue May 24 14:00:00 2011 msAATTsuse.de - eliminate use of global vars: ImageCache and RecycleRoot - added check for global object in constructors - added perl-RPMQ as requirement for kiwi-instsource
Tue May 24 14:00:00 2011 msAATTsuse.de - eliminate global variables used by main()
Mon May 23 14:00:00 2011 msAATTsuse.de - eliminate use of global variables: main::FS * and main::SetImageType
Mon May 23 14:00:00 2011 msAATTsuse.de - cleanup kiwiExit calls
Mon May 23 14:00:00 2011 msAATTsuse.de - s390: fixed disk online code, wait for disk device to appear (bnc #693031)
Sun May 22 14:00:00 2011 msAATTsuse.de - fixed boot included archive installation in prepareBootImage
Fri May 20 14:00:00 2011 msAATTsuse.de - moved .kiwirc into the tests/unit directory
Fri May 20 14:00:00 2011 msAATTsuse.de - v4.89 released
Fri May 20 14:00:00 2011 msAATTsuse.de - allow unit tests to run standalone without kiwi installed in /usr/share/kiwi
Fri May 20 14:00:00 2011 msAATTsuse.de - fixed obsoletes in spec file
Fri May 20 14:00:00 2011 msAATTsuse.de - build arch of master kiwi can\'t be noarch if other arch specific sub packages will be created
Fri May 20 14:00:00 2011 msAATTsuse.de - make rpmlint happy:
* don\'t package empty files
* don\'t package non unix file (dos2unix)
* don\'t package scripts without executable flag
* don\'t use unversioned obsoletes
* provide man pages with the master kiwi package
* make the master kiwi package noarch if possible
* require kiwi-tools version from the same master
Fri May 20 14:00:00 2011 msAATTsuse.de - fixed stylesheet bugs: Thanks to Tom for looking at it
* A xsl:call-template cannot contain a mode attribute. Only xsl:apply-templates can have it. The affected files are convert39to41.xsl and convert41to42.xsl
* A is incorrect in two ways: First a xsl:copy needs to have something to copy in its _content_, second the select attribute is syntactically wrong; AATT means attribute, but which one? I guess, it should mean *\"/>. However, in this case it\'s totally useless as it copies *all * attributes, regardless of the for-each loop. So the for-each loop can never act as it was supposed to be.
Fri May 20 14:00:00 2011 msAATTsuse.de - get unit test working again, due to restructuring changes - provide config and target location as arguments to prepareBootImage() and createBootImage(). Retrieving those from the CommandLine object is not following our functional separation model as the config dir and target dir for the initrd cannot be given on the command line and therefore should not be stored on the command line argument - refactor setting of XML parameters into methods for re-use
Thu May 19 14:00:00 2011 msAATTsuse.de - run unit tests during package build if SUSE > 1130
Thu May 19 14:00:00 2011 msAATTsuse.de - limit the validation of config.xml files in the Kiwi tree to files located outside the tests tree. config.xml files in the tests tree are not necessarily expected to be valid as we also need to do negative unit testing.
Thu May 19 14:00:00 2011 msAATTsuse.de - fixed version update script
Thu May 19 14:00:00 2011 msAATTsuse.de - cleanup situation around global variables. There is now a KIWIGlobals object which contains all global variables and functions. There are still some global variables in use which references options. Those should be handled by a KIWICommandline accessor
Wed May 18 14:00:00 2011 msAATTsuse.de - fixed unit test kiwiImageCreator.pm - fixed *.kiwi search in getControlFile
Wed May 18 14:00:00 2011 msAATTsuse.de - moved the image create step into the KIWIImageCreator code There is now a function createImage / createBootImage which is also used by the build step. Along with this change I removed all occurences of the main::Survive variable and thus removed all recursive kiwi calls now from the code.
Wed May 18 14:00:00 2011 adrianAATTsuse.de - do not enforce the need of a meta package, driver update disk is not needing one (on command from cwh)
Tue May 17 14:00:00 2011 msAATTsuse.de - cleanup fix; don\'t create instances of KIWICommandLine if it\'s not necessary. Also removed redundant code in prepareBootImage
Tue May 17 14:00:00 2011 msAATTsuse.de - make the user password optional; It is valid to have a user on a system that cannot login via password authentication. Therefore kiwi should not force a password assignment in the element
Tue May 17 14:00:00 2011 msAATTsuse.de - fixed caching if used for boot images. Also fixed the check between the initial prepare with cache and the remount of a prepared tree with cache
Tue May 17 14:00:00 2011 adrianAATTsuse.de - add SLE 11 SP 2 media style plugin, using sha256 sums for meta data
Tue May 17 14:00:00 2011 adrianAATTsuse.de - fix installation directory of 12.1 plugin
Tue May 17 14:00:00 2011 adrianAATTsuse.de - add openSUSE 12.1 media style, using sha256 meta data sums
Tue May 17 14:00:00 2011 msAATTsuse.de - removed global variables CacheRoot and CacheRootMode and cleaned up the KIWICache code. Also added a new runtime check: __checkRootRecycleCapability which makes sure that a cache based root tree cannot be used in --recycle-root mode
Tue May 17 14:00:00 2011 msAATTsuse.de - last fix using --numeric-owner was still broken. Robert has added a better and more robust patch to fix this
Tue May 17 14:00:00 2011 msAATTsuse.de - use --numeric-owner option in tar to prevent the table layout to break if the user/group field in the tar -t output exceeds the field length
Tue May 17 14:00:00 2011 msAATTsuse.de - don\'t strip vgrename command from initrd
Mon May 16 14:00:00 2011 msAATTsuse.de - moved the following operation modes into the KIWIImageCreator: also fixed the unit tests and get rid of some recursive calls
* --setup-splash => createSplash()
* --bootusb => createImageBootUSB()
* --bootcd => createImageBootCD()
* --installcd => createImageInstallCD()
* --installstick => createImageInstallStick()
* --bootvm => createImageDisk()
* --convert => createImageFormat()
Mon May 16 14:00:00 2011 msAATTsuse.de - make sure XML validation happens in each processing mode - fixed environment cleanup, added cleanup function in main
Mon May 16 14:00:00 2011 msAATTsuse.de - fixed logging. Added function resetRootChannel which allows to split up the log at a certain point. This is used when one --init-cache call creates multiple caches and each one has a dedicated log file
Mon May 16 14:00:00 2011 msAATTsuse.de - moved the upgrade code into the KIWIImageCreator object also removed the recursive upgrade call inside the create step and call the new function upgradeImage() instead
Fri May 13 14:00:00 2011 msAATTsuse.de - fixed fixupOverlayFilesOwnership(), remove leading spaces from file names
Fri May 13 14:00:00 2011 msAATTsuse.de - added unit tests for testing the KIWIImageCreator code
Fri May 13 14:00:00 2011 msAATTsuse.de - added new KIWICache object and move out the cache code from the main kiwi.pl file into the new object code
Thu May 12 14:00:00 2011 msAATTsuse.de - added new KIWIImageCreator object which will encapsulate the major kiwi processing modes like prepare, create, upgrade and others into module functions. So far the prepare step has been moved out and others will follow. The goal is to get rid of the global variable stack in kiwi as well as to remove the recursive kiwi calls
Thu May 12 14:00:00 2011 msAATTsuse.de - unit test fixes:
* move test repo to sharable location, adjust XMLInfo test
* fixed removal of test directory, remove only if no mounts exists
* fixed test directory cleanup, remove only if no mount exists
* fixed broken unit test due to commit: c9c797b47cb4
Wed May 11 14:00:00 2011 msAATTsuse.de - changed name of enableRootRecycle to setRootRecycle, better following the style of the KIWICommandLine functions
Wed May 11 14:00:00 2011 msAATTsuse.de - fixed use of glob-type for filehandle in KIWIRoot.pm
Wed May 11 14:00:00 2011 msAATTsuse.de - DB: fixed some typos in schema inline documentation
Wed May 11 14:00:00 2011 msAATTsuse.de - expand command line object to handle more options. Also expand the unit tests for this options. This happened in preparation to the new KIWIImageCreator object which will encapsulate the kiwi build, prepare and create modes
Wed May 11 14:00:00 2011 msAATTsuse.de - move knowledge about the default cache directory path into the KIWILocator module: getDefaultCacheDir()
Wed May 11 14:00:00 2011 msAATTsuse.de - update unit test infrastructure in preparation for the new KIWIImageCreator object which will encapsulate the kiwi build, prepare and create modes
Tue May 10 14:00:00 2011 msAATTsuse.de - fixed this:// path evaluation if used in --info mode (bnc #692813)
Tue May 10 14:00:00 2011 msAATTsuse.de - enhanced the ddn() function to work correctly if a udev /dev/disk/ device name is specified as disk parameter (bnc #692629)
Mon May 9 14:00:00 2011 msAATTsuse.de - integrate end-to-end testsuite written by Bernhard Wiedemann into kiwi. There is a kiwi --test-image ... mode now, and I added an example test to the 11.4 JeOS description. It\'s required to have the os-autoinst package installed in order to run a test (bnc #677789)
Fri May 6 14:00:00 2011 msAATTsuse.de - v4.88 released
Fri May 6 14:00:00 2011 msAATTsuse.de - fixed build for ia64 architecture
Wed May 4 14:00:00 2011 msAATTsuse.de - fixed the problem where the element is being dropped during XML file upgrade if the element is specified as a child of . The element is moved to every
Wed May 4 14:00:00 2011 msAATTsuse.de - fixed xsl style sheets, apply changes only if the schema version of the input data is smaller than the style sheet version
Wed May 4 14:00:00 2011 msAATTsuse.de - fixed typo in kiwi_bootloader evaluation (bnc #691424) - fixed hvc/xvc console setup, add entry only if missing (bnc #691424)
Tue May 3 14:00:00 2011 rootAATTsuse.de - fixed disk offset calculation for zipl.conf creation, also fixed the lookup of the boot partition and the cleanup of the loop devices if the zipl bootloader is used (bnc #687927)
Tue May 3 14:00:00 2011 msAATTsuse.de - switch back to by-id device name schema (bnc #691199) This reverts commit: f1e31c85689d6925b9c3069a845f5e252c838936
Tue May 3 14:00:00 2011 msAATTsuse.de - fixed first type selection for a subset of types selected by profiles. This is a follow up fix for (bnc #690554)
Tue May 3 14:00:00 2011 msAATTsuse.de - added support for FORCE_KEXEC in kernelCheck function which allows to force the kexec call even if the kernel versions are the same (bnc #691247)
Mon May 2 14:00:00 2011 msAATTsuse.de - removed pxeNotifyNewImage function. This is done inside the slepos specific code hooked in (bnc #691249)
Mon May 2 14:00:00 2011 msAATTsuse.de - make sure bootincluded_archives.filelist contains only files
Mon May 2 14:00:00 2011 msAATTsuse.de - move the createTmpDirectory code from the XML object to the Locator. Creating a directory really has nothing to do with XML processing, the Locator now handles local file system interaction, thus this is a better place.
Mon May 2 14:00:00 2011 msAATTsuse.de - fixed reboot call in kernelCheck function (bnc #689294)
Mon May 2 14:00:00 2011 msAATTsuse.de - fixed type selection if not type was specified and no primary attribute is set to any type. In that case the first type written in the XML description should be used (bnc #690554)
Thu Apr 28 14:00:00 2011 msAATTsuse.de - also allow NFSROOT and AOEROOT to be set on the commandline (bnc #536309)
Thu Apr 21 14:00:00 2011 msAATTsuse.de - v4.87 released
Thu Apr 21 14:00:00 2011 msAATTsuse.de - changed searchBusIDBootDevice() for the s390 architecture. All required information is now obtained from /sys/firmware/ipl According to this no additional kernel parameters are required to set the boot device online (bnc #689004)
Thu Apr 21 14:00:00 2011 msAATTsuse.de - added alternative location for kiwi hooks scripts which is FHS compliant: /lib/kiwi/hooks/ (bnc #688792)
Wed Apr 20 14:00:00 2011 msAATTsuse.de - added URL mapping table for the opensuse:// url type. When resolving this the regular expression based mapping table is used to create a valid location from the specified URI data. It\'s possible to extend the existing KIWIURL.txt table according to the needs of the user or service.
Wed Apr 20 14:00:00 2011 msAATTsuse.de - changed xsl 51 to 52 conversion. The obsolete usb image type is removed from the XML input. this image type can be either replaced by an iso hybrid type or by an oem type. As there is a choice for the user the stylesheet will not make a decision here.
Wed Apr 20 14:00:00 2011 msAATTsuse.de - netboot: added preLoadConfiguration hook: preLoadConfiguration: is called before the client. is loaded by kiwi and thus can be used to inject alternative code for loading the client configuration. - netboot: added postLoadConfiguration hook: postLoadConfiguration: is called after the client configuration has been loaded and imported and can be used for any action after the client configuration has exported its variables into the boot environment - netboot: renamed the default register file which is put on the pxe boot server if there is client configuration found. kiwi now put a file called: upload/client.$DHCPCHADDR which doesn\'t conflict with the files SLEPOS uses for registration - netboot: removed SLEPOS related code, posbios calls and the evaluation of the WORKSTATION_LDAP_IP variable. All this will be part of product specific hook scripts
Wed Apr 20 14:00:00 2011 msAATTsuse.de - allow parameters to be passed to hook scripts
Tue Apr 19 14:00:00 2011 msAATTsuse.de - added setupBootLoaderTheme() function which is called after the bootloader configuration has been written. The function adapts/sets the THEME variable in the /etc/sysconfig/bootsplash file according to the boot theme set in the kiwi XML configuration
Mon Apr 18 14:00:00 2011 msAATTsuse.de - fixed suseStripFirmware to match in subdirectories below /lib/firmware/ too. firmware installed by the kernel packages for example were removed
Fri Apr 15 14:00:00 2011 msAATTsuse.de - v4.86 released
Thu Apr 14 14:00:00 2011 msAATTsuse.de - fixed boot partition id in suse-repart if syslinux is used as bootloader. We are using fat32 now (c)
Thu Apr 14 14:00:00 2011 msAATTsuse.de - using sfdisk --id now, thus require sfdisk in spec file
Thu Apr 14 14:00:00 2011 msAATTsuse.de - fixed getStorageID function and the evaluation of the return value of this function. The assumption that the partition id is a decimal value is wrong, thus calling int() on the result is not a good idea. man I really shouldn\'t code at midnight
Thu Apr 14 14:00:00 2011 msAATTsuse.de - fixed setupSUSEInitrd function. We create imho poinless links named linux.vmx and initrd.vmx which are not used at all if the initrd could be generated by mkinitrd. Additionally the links are broken if the running kernel is not the same as the installed kernel. Therefore I removed the creation of that link files - fixed kernelList function. the code searching for installed kernels if the running kernel can\'t be found was never reached. Additionally the function did not search for other than the running kernel which seems to be wrong if multiple kernels are installed
Thu Apr 14 14:00:00 2011 msAATTsuse.de - update config.sh scripts for the ec2 examples to ensure the ssh policy and inittab console settings are correct
Thu Apr 14 14:00:00 2011 msAATTsuse.de - added new consistency check to enforce that ec2 formatted images are created as file system types. This required an update to a number of other config files used for Validator unit testing. Added new unit tests for the EC2 requirement.
Wed Apr 13 14:00:00 2011 msAATTsuse.de - fixed parted type setup, use the form \'set [nr] type 0x[id]\' this is used to workaround a parted bug happening if you type \'set [nr] swap on\'. parted refuses to set this even though the help page in batch mode tells the user to do it exactly that way
Wed Apr 13 14:00:00 2011 msAATTsuse.de - removed fat 8+3 kernel/initrd renaming code. This is no longer required when using a fat32 / vfat partition / filesystem - fixed kernelCheck() function: rewrote the code
Wed Apr 13 14:00:00 2011 msAATTsuse.de - fixed fstab setup in ec2 format setup (bnc #687211)
Mon Apr 11 14:00:00 2011 msAATTsuse.de - fixed the --lvm option. The option now adds a systemdisk element and behaves the same as if the users would have modified the XML accordingly
Mon Apr 11 14:00:00 2011 msAATTsuse.de - make sure installBootLoader() is called for vmxboot image if a root overlay filesystem structure is used - move resetBootBind() into installBootLoader()
Mon Apr 11 14:00:00 2011 msAATTsuse.de - call setupBootPartition() only on first boot
Mon Apr 11 14:00:00 2011 msAATTsuse.de - added evaluation of kiwi_ramonly element for vmx too - added evaluation of kiwi_ramonly element for ppc and s390 arch - added evaluation of kiwi_ramonly element for non LVM setup
Mon Apr 11 14:00:00 2011 msAATTsuse.de - fixed subsequent mount procedure of a clicfs based image. The resize2fs call has to happen in any case if the image is a ramonly system
Fri Apr 8 14:00:00 2011 msAATTsuse.de - v4.85 released
Fri Apr 8 14:00:00 2011 msAATTsuse.de - in KIWIRoot.pm the fixupOverlayFilesOwnership() function fails to quote the filaname which results in problems with files/directories with spaces in their names.
Thu Apr 7 14:00:00 2011 msAATTsuse.de - Added a new consistency check and unit tests to ensure that config.xml files specifying an image type that requires an initrd set the boot attribute on the element.
Wed Apr 6 14:00:00 2011 mbarringerAATTsuse.de Fixing a problem with imagewriter\'s makefile
Wed Apr 6 14:00:00 2011 mbarringerAATTsuse.de Minor fix to the command line help output in Imagewriter
Wed Apr 6 14:00:00 2011 mbarringerAATTsuse.de Fixing Imagewriter compilation w/ HAL support enabled
Wed Apr 6 14:00:00 2011 msAATTsuse.de - don\'t use the result of a getExecPath() call happened outside of the chroot, for a command call inside the chroot. It might happen that the path to the binary is different inside the chroot and thus can\'t be found
Wed Apr 6 14:00:00 2011 mbarringerAATTsuse.de Fixing bnc#679099 - Imagewriter still requires HAL
Wed Apr 6 14:00:00 2011 rootAATTsuse.de - added support for ZFCP devices
Wed Apr 6 14:00:00 2011 msAATTsuse.de - added repodata information for s390 suse-sle11-repo
Tue Apr 5 14:00:00 2011 msAATTsuse.de - if the target-device option is used kiwi normally doesn\'t create a disk image file until the image file is created by a dump off from the target device. SuSE studio requires the size information of the target disk before the dump off happens, because it creates that target device internally. Therefore this patch makes sure that a image disk file is created before the dump off happens
Tue Apr 5 14:00:00 2011 msAATTsuse.de - moved from fat16 (0x6) to fat32 (0xc) for syslinux setup
Tue Apr 5 14:00:00 2011 msAATTsuse.de - fixed kiwiCommandLine unit test according to the changes done in commit: 7954bf3bed5845f4ece4991ef17f8f2978c8fbee
Mon Apr 4 14:00:00 2011 msAATTsuse.de - created a repo to support new tests for size query and package install query. Additionally the common test case base class gets new methods to create a writable directory and to clean it up after the test
Mon Apr 4 14:00:00 2011 msAATTsuse.de - fixed KIWICommandLine::setLogFile, it breaks for \'terminal\' logging - fixed KIWICommandLine::setAdditionalRepos, it breaks if numAlias and or numPrios is zero
Mon Apr 4 14:00:00 2011 msAATTsuse.de - fixed solvable creation for old distros (sle10) providing uncompressed versions of suse/setup/descr/packages file
Mon Apr 4 14:00:00 2011 msAATTsuse.de - fixed init(), creation of global kiwi log object is required for KIWIQX execution logging
Mon Apr 4 14:00:00 2011 msAATTsuse.de - added repodata to kiwi provided suse- * repos and move the repotype to rpm-md in all referencing XML descriptions
Mon Apr 4 14:00:00 2011 msAATTsuse.de - removed test_cmdReplaceRepo_noRepoType test, it\'s valid to overwrite first repo without specifying a type
Mon Apr 4 14:00:00 2011 msAATTsuse.de - renamed the test implementation and data base directory to be consistent with other tests, i.e. start with kiwi
Sun Apr 3 14:00:00 2011 msAATTsuse.de - update spec file, added jing as recommended package
Sun Apr 3 14:00:00 2011 msAATTsuse.de - added unit tests for the new KIWIXMLInfo object. Also break up the bigger tests into smaller test cases
Sun Apr 3 14:00:00 2011 msAATTsuse.de - added a new KIWIXMLInfo object and eliminate the listXMLInfo() function from kiwi.pl
Fri Apr 1 14:00:00 2011 msAATTsuse.de - v4.84 released
Fri Apr 1 14:00:00 2011 msAATTsuse.de - added normalizeBootPath() function which allows to use the following boot attribute source locator prefixes:
* this:// => pointing to the image description directory
* system:// => pointing to /usr/share/kiwi/image
* dir:// => pointing to a directory if no source locator is set kiwi uses the path if it is an absolute path and in case of a relative path it checks if the path relative to the called directory exists and if not it also checks if the path exists below /usr/share/kiwi/image
Thu Mar 31 14:00:00 2011 msAATTsuse.de - fixed LVM repartition code. if no recovery partition is requested just us the default end sector suggested by the partition tool
Wed Mar 30 14:00:00 2011 rootAATTsuse.de - fixed zipl setup if used with LVM images
Wed Mar 30 14:00:00 2011 msAATTsuse.de - suse 11.4 doesn\'t provide the by-id disk paths anymore. Because of that change kiwi switches to the by-path method with this commit
Wed Mar 30 14:00:00 2011 adrianAATTsuse.de - do not replace AATT to . in package names when building products
Wed Mar 30 14:00:00 2011 msAATTsuse.de - fixed xen examples for suse 11.4, xen-tools-domU doesn\'t exist anymore. xen-tools is used instead
Tue Mar 29 14:00:00 2011 msAATTsuse.de - dont\'t start udev using startproc (bnc #683126)
Tue Mar 29 14:00:00 2011 msAATTsuse.de - fixed boot path lookup if boot attribute contains an absolute path (bnc #683135)
Mon Mar 28 14:00:00 2011 msAATTsuse.de - added fixupOverlayFilesOwnership() function which handles all files from the overlay root tree and the image archives. The function changes the ownership of all that files to root:root if they don\'t belong to a user in the passwd file. files which belongs to passwd users are not touched and therefore must be added with the correct owner:group setup in the overlay tree and/or archive
Mon Mar 28 14:00:00 2011 msAATTsuse.de - fixed perl warning (uninitialized variable) and a checker error when building an ISO image without setting the \'flags\' attribute.
Fri Mar 25 13:00:00 2011 msAATTsuse.de - v4.83 released
Fri Mar 25 13:00:00 2011 msAATTsuse.de - option -s for qemu-img convert hast changed its meaning
Thu Mar 24 13:00:00 2011 msAATTsuse.de - fixed pxeRaidCreate() function. Use --run option when creating the array and write a more reliable mdadm.conf file (bnc #678076)
Wed Mar 23 13:00:00 2011 msAATTsuse.de - fixed format string of hexdump. If the mbrid has leading zero\'s the hexdump call removes them which leads to an error when string matching the mbrid
Wed Mar 23 13:00:00 2011 msAATTsuse.de - DB: update documentation, new option --mbrid
Wed Mar 23 13:00:00 2011 msAATTsuse.de - added support for a custom mbr disk label with the option --mbrid. The default is to create a random mbr disk label.
Tue Mar 22 13:00:00 2011 msAATTsuse.de - DB: update documentation, new info module \'version\'
Tue Mar 22 13:00:00 2011 msAATTsuse.de - added info \'version\' selection to obtain the appliance name and version information
Tue Mar 22 13:00:00 2011 msAATTsuse.de - fixed start of udev and blogd
Tue Mar 22 13:00:00 2011 msAATTsuse.de - enable loading of agp modules before udev is started (bnc #659843)
Tue Mar 22 13:00:00 2011 msAATTsuse.de - reverts commit 8f5df54fd23cc6c16e7d72fe5954e62fd70bb458 busybox is distributed with 11.4 (bnc #679660)
Mon Mar 21 13:00:00 2011 msAATTsuse.de - added suseStripFirmware() which removes all firmware files which are not referenced by any module (bnc #681234)
Mon Mar 21 13:00:00 2011 msAATTsuse.de - fixed use of uninitialized value in __checkPatternTypeAttrrValueConsistent
Mon Mar 21 13:00:00 2011 msAATTsuse.de - DB: update documentation, new attribute prefer-license
Mon Mar 21 13:00:00 2011 msAATTsuse.de - added support for the repository attribute \'prefered-license\' The repository providing this flag will be used to install the license tarball due to request in bnc #633664. If no repo with a prefered license flag exists the search happens over all repos but it\'s not guaranteed in that case that the search order follows the repo order like they are written into the XML description (bnc #680886)
Mon Mar 21 13:00:00 2011 msAATTsuse.de - DB: update documentation and examples, new element oem-silent-boot
Mon Mar 21 13:00:00 2011 msAATTsuse.de - added support for the configuration of a silent OEM boot mode Normally the oem boot process switches the splash screen off. With true as part of the oemconfig section, the splash stays on top
Fri Mar 18 13:00:00 2011 msAATTsuse.de - fixed examples, added boot.local script to the suse-live-stick example which allows to mount the fat boot partition as data container below /media/stickstorage
Fri Mar 18 13:00:00 2011 msAATTsuse.de - fixed kiwirevision check. In case of a git revision it\'s invalid to check for less than a number. The check must match the revision
Fri Mar 18 13:00:00 2011 msAATTsuse.de - DB: update documentation, kiwirevision specifies a git commit id
Fri Mar 18 13:00:00 2011 msAATTsuse.de - v4.82 released
Fri Mar 18 13:00:00 2011 msAATTsuse.de - move the knowledge about the default package manager from the KIWIManager object into the XML object. This is a configuration value and thus the default should be in the part of the code that processes the configuration
Fri Mar 18 13:00:00 2011 msAATTsuse.de - added a new target to the Makefile to allow the execution of a single unit test, i.e. support \'make KIWIXMLValidator.t\' This is useful when working on unit tests as it allows to execute only the test being worked on.
Thu Mar 17 13:00:00 2011 msAATTsuse.de - fixed spec file. perl-satsolver from the 11.4 distro doesn\'t contain the code changes Klaus made during the Studio workshop Therefore kiwi provides the required version now in the Virtualization:Appliances repo for 11.4 (bnc #680549)
Thu Mar 17 13:00:00 2011 msAATTsuse.de - fixed 11.3 and 11.4 JeOS templates. openssl-certs doesn\'t exist there anymore. I replaced it by ca-certificates
Thu Mar 17 13:00:00 2011 msAATTsuse.de - increased size of boot partition from 60M to 100M. If mkinitrd is called it might happen that /boot runs out of space
Wed Mar 16 13:00:00 2011 msAATTsuse.de - The ISO generation code allows for either genisoimage or mkisofs. The checker does not support this. The patch addresses this problem and the checker no will be happy if either genisoimage or mkisofs is found (bnc #680148)
Wed Mar 16 13:00:00 2011 msAATTsuse.de - fixed typos in ppc boot scripts (spaces at end of line, tab mismatches) and adapt latest noarch code changes from x86 boot scripts to ppc - removed 01-console.sh from ppc JeOS template. That\'s done by the setupConsole() function in suse-preinit
Wed Mar 16 13:00:00 2011 msAATTsuse.de - fix the VMware image example. The example does not contain necessary packages for a graphical user interface, thus setting window manager and runlevel in config.sh to imply that a GUI environment is present is misleading
Tue Mar 15 13:00:00 2011 msAATTsuse.de - fixed device map cleanup. The cleanup happened to early because the installBootLoader() code accesses the device map under certain circumstances but the original device was already freed. In that case the installBootLoader() code re-adds the mapping but that could lead to a different device name compared to the one stored in the device mapping table
Tue Mar 15 13:00:00 2011 msAATTsuse.de - prevent the use of File::Path qw(make_path remove_tree) because it\'s not compatible to File::Path qw(mkpath rmtree) in older perl versions
Tue Mar 15 13:00:00 2011 msAATTsuse.de - fixed race condition in CD device search, missing udevPending - fixed wrong mountCalled variable setup, the return code of the mount call was not checked. So even if the mount failed the variable was set to \'yes\' which leads to an umount of the root filesystem before the root filesystem was activated
Tue Mar 15 13:00:00 2011 msAATTsuse.de - removed local sle11 repo assigned to 11.4 net|oemboot boot image description. This was to pull in busybox but I don\'t want sle busybox in 11.4 to avoid compatibility problems (bnc #679659)
Tue Mar 15 13:00:00 2011 msAATTsuse.de - removed busybox from boot image descriptions for 11.4. It\'s not distributed with the 11.4 media anymore (bnc #679660)
Tue Mar 15 13:00:00 2011 msAATTsuse.de - added new consistency check to assure that all credentials used with any specified \"https\" repository are the same. Further the consistency check verifies that the username and password attributes are always used together.
Tue Mar 15 13:00:00 2011 msAATTsuse.de - added support for https repositories for zypper with username and password. Here is an example specification:
kiwi now writes a credentials file and takes advantage of the zypper support for this file. This patch also addresses the problem that in the current implementation we end up using the build system zypper configuration file \"zypper.conf\" as zypper is called without the \"--config\" option.
Tue Mar 15 13:00:00 2011 msAATTsuse.de - DB: update documentation, https support added for zypper
Mon Mar 14 13:00:00 2011 msAATTsuse.de - fixed the udev trigger call which must only be called one time after the udev daemon has started (bnc #668014)
Mon Mar 14 13:00:00 2011 msAATTsuse.de - fixed setup of the loader initrd variable. Normally this variable is set via the kernel commandline but in case of a PXE setup it might be missing. In that case we check if the bootloader is present as .profile variable in kiwi_bootloader and set loader appropriately
Mon Mar 14 13:00:00 2011 msAATTsuse.de - fixed OEM PXE installation code. Wrong function name, checkServer was renamed into pxeCheckServer and the image file in case of a pxe installation is gzip compressed not squashfs embedded
Mon Mar 14 13:00:00 2011 msAATTsuse.de - fixed spec file, kiwi-desc-usbboot was dropped
Mon Mar 14 13:00:00 2011 msAATTsuse.de - added netboot root configuration check. The NFSROOT setup in combination with clicfs is not allowed. It doesn\'t make sense because it requires the clicfs process to run on the NFS server which would allow to connect only one station safely. AOEROOT or NBDROOT should be used in combination with clicfs instead
Mon Mar 14 13:00:00 2011 msAATTsuse.de - added kernel-firmware package to boot images
Mon Mar 14 13:00:00 2011 msAATTsuse.de - DB: update documentation, added a section about OEM -> pxe install
Fri Mar 11 13:00:00 2011 msAATTsuse.de - v4.81 released
Fri Mar 11 13:00:00 2011 msAATTsuse.de - added function resetBootBind() which turns the bind mounted boot path into a standard distro path which allows kernel updates. resetBootBind() is only called if mkinitrd can be used according to the image root filesystem setup. Along with the resetBootBind change we also had to fix the setup of the fat boot partition if the syslinux bootloader is used. Normally there is a link named boot -> . but on fat we can\'t have links so the data has to be moved. (bnc #678159)
Fri Mar 11 13:00:00 2011 msAATTsuse.de - adapt recent changes to x86 linuxrc to the s390 code stream
Fri Mar 11 13:00:00 2011 msAATTsuse.de - fixed typo in motd message of 11.4 JeOS
Fri Mar 11 13:00:00 2011 msAATTsuse.de - DB: update documentation for ramonly attribute
Thu Mar 10 13:00:00 2011 msAATTsuse.de - fixed syslinux boot partition setup, links on fat does not exist
Thu Mar 10 13:00:00 2011 msAATTsuse.de - added optional type attribute ramonly=\"true\" which forces the COW device in a overlay filesystem setup to point to the main RAM memory
Thu Mar 10 13:00:00 2011 msAATTsuse.de - fixed evaluation of $main::FatStorage. I put it too late in the code so that the overall disk size wasn\'t adjusted
Thu Mar 10 13:00:00 2011 msAATTsuse.de - removed usbboot boot image and usb image type from kiwi. The obsolete usb image type has been replaced by the hybrid iso image type or by the oem image type.
Thu Mar 10 13:00:00 2011 msAATTsuse.de - DB: update documentation and removed the suse-live-stick examples. - DB: suse-live-stick are now handled by the hybrid iso examples
Thu Mar 10 13:00:00 2011 msAATTsuse.de - added more careful grub install check
Wed Mar 9 13:00:00 2011 msAATTsuse.de - When mounting the hybrid boot drive, select the partition marked as bootable instead of blindly mounting the first one. This change makes it possible to update the system if the image has been written to a writable medium.
Wed Mar 9 13:00:00 2011 msAATTsuse.de - DB: update documentation, man page update (new options)
Wed Mar 9 13:00:00 2011 msAATTsuse.de - fixed syslinux boot device setup if LVM is used
Wed Mar 9 13:00:00 2011 msAATTsuse.de - make the creation of USB sticks more Windows friendly. For a detailed description how this is done watch the bug report: (bnc #677246)
Tue Mar 8 13:00:00 2011 msAATTsuse.de - fixed spec file for s390 build
Tue Mar 8 13:00:00 2011 msAATTsuse.de - fixed spec file for ppc build
Fri Mar 4 13:00:00 2011 msAATTsuse.de - netboot: allow network boot in degraded raid mode (bnc #668014) - netboot: remove superblocks from raid disks if RAID has been dectivated in config. (bnc #668014)
Fri Mar 4 13:00:00 2011 msAATTsuse.de - added support for the ncpus attribute on the element. It is used to set the number of virtual cpus for a VM and written to .vmx and .xenconfig
Thu Mar 3 13:00:00 2011 msAATTsuse.de - fixed xsl stylesheet convert47to48.xsl. existing lvmvolumes section wasn\'t translated into systemdisk section
Thu Mar 3 13:00:00 2011 msAATTsuse.de - added KIWICommandLine and KIWIRuntimeChecker modules. The command line module is a storage container for the commandline options passed to kiwi. It\'s used to transport the data into other objects. One successor of KIWICommandLine is the KIWIRuntimeChecker module which does some checks while kiwi runs. This means kiwi reads in the image description and after that the runtimer checker checks if it is possible to build the desired image according to the specified information. If that tests are passed kiwi enters the actual processing mode which is either the image prepare or create. This is useful to exit early if some option combination or data set is valid according to the XML schema but can\'t be build due to other reasons.
Thu Mar 3 13:00:00 2011 msAATTsuse.de - added support for the new EC2 Japan region
Thu Mar 3 13:00:00 2011 msAATTsuse.de - assure that the given memory size given for a Vm is an integer
Wed Mar 2 13:00:00 2011 msAATTsuse.de - removed python-elementtree package required by smart which was removed in an earlier commit
Wed Mar 2 13:00:00 2011 msAATTsuse.de - make sure size parameter is used without adding kernel and initrd space if the given size is big enough.
Wed Mar 2 13:00:00 2011 msAATTsuse.de - removed smart packages - export PBL_SKIP_BOOT_TEST=1 to allow mkinitrd to install - changed SLE10 JeOS example:
* all packages in bootstrap to allow the use of zypper
* remove installiso option which doesn\'t work because no squashfs - added an updated version of parted for SLE10 - added a zypper version check for the kiwi upgrade mode - changed all SLE10 boot image descriptions to put packages into the bootstrap section to allow the use of zypper - adapt README of SLE10 JeOS, smart is not required - adapt kiwi.spec to recommend zypper only
Wed Mar 2 13:00:00 2011 msAATTsuse.de - v4.80 released
Wed Mar 2 13:00:00 2011 adrianAATTsuse.de - export meta data location content keys for ftp tree medias
Wed Mar 2 13:00:00 2011 adrianAATTsuse.de - ftp medias beside first one should not provide the product
Mon Feb 28 13:00:00 2011 msAATTsuse.de - don\'t ignore blocksize value from config. (bnc #675004)
Fri Feb 25 13:00:00 2011 msAATTsuse.de - added support for --recycle-root option which allows to use and modify an existing root tree while in the kiwi prepare step.
Fri Feb 25 13:00:00 2011 msAATTsuse.de - v4.79 released
Fri Feb 25 13:00:00 2011 msAATTsuse.de - The default tftp block size chosen by kiwi is too small and not aligned to page size (4096), so it causes unnecessary overhead. This patch improves loading performance a lot
Thu Feb 24 13:00:00 2011 adrianAATTsuse.de - just compare the major version of squashfs kernel module and squashfs tools (bnc #674653)
Thu Feb 24 13:00:00 2011 adrianAATTsuse.de - parse all available product file not just the first one
Thu Feb 24 13:00:00 2011 msAATTsuse.de - fixed -z test for RELOAD_CONFIG variable in netboot
Thu Feb 24 13:00:00 2011 msAATTsuse.de - added unit testing for the KIWILocator object
Thu Feb 24 13:00:00 2011 msAATTsuse.de - added ensconce parameter -i imagename which contains the contents of the name attribute. ensconce requires this to distinguish between system image and initrd image
Wed Feb 23 13:00:00 2011 msAATTsuse.de - Using here documents with tabs in front of the limit string works but is not recommended. Tabs are ignored when searching for the limit string but spaces are not, in which case the here document ends at the next occurence of the limit string or at the end of the file with some shells not even issuing a warning
Wed Feb 23 13:00:00 2011 msAATTsuse.de - fixed use of uninitialized value if an improper configuration directory is specified
Tue Feb 22 13:00:00 2011 msAATTsuse.de - move warning messages about shm and semaphores into logfile
Tue Feb 22 13:00:00 2011 msAATTsuse.de - v4.78 released
Tue Feb 22 13:00:00 2011 msAATTsuse.de - added check to enforce the \"no whitespace\" rule for profile names
Tue Feb 22 13:00:00 2011 msAATTsuse.de - enhanced patternType check which now allows the use of the patternType attribute for all specifications that add packages to the image
Tue Feb 22 13:00:00 2011 msAATTsuse.de - fixed suse-min-gnome example, empty vmx package section doesn\'t make sense
Tue Feb 22 13:00:00 2011 msAATTsuse.de - fixed cleanup of shared memory segments and semaphores by a valid destructor in KIWISharedMem.pm
Tue Feb 22 13:00:00 2011 msAATTsuse.de - fixed regexp in __checkPatternTypeAttrConsistent()
Tue Feb 22 13:00:00 2011 msAATTsuse.de - fixed locale Makefile, wrong use of equals operator
Mon Feb 21 13:00:00 2011 msAATTsuse.de - v4.77 released
Mon Feb 21 13:00:00 2011 msAATTsuse.de - call isohybrid only once according to caller environment
Mon Feb 21 13:00:00 2011 adrianAATTsuse.de - add optional support for hybrid iso for product medias
Mon Feb 21 13:00:00 2011 msAATTsuse.de - v4.76 released
Mon Feb 21 13:00:00 2011 msAATTsuse.de - added support for config-cdroot.tgz and config-cdroot.sh in OEM install media (CD and stick) (bnc #673566)
Mon Feb 21 13:00:00 2011 msAATTsuse.de - removed obsolete TestSuite check in KIWIURL
Mon Feb 21 13:00:00 2011 msAATTsuse.de - moved check for ec2-bundle-image after the check for the Amazon AWS credentials
Sun Feb 20 13:00:00 2011 msAATTsuse.de - setup owner/group permissions only if the user home directory exists (bnc #658172)
Sun Feb 20 13:00:00 2011 msAATTsuse.de - DB: update documentation for netboot config files update feature
Sun Feb 20 13:00:00 2011 msAATTsuse.de - added support for netboot config files update. The update happens according to the value of an optional md5sum hash specified per file
Sat Feb 19 13:00:00 2011 msAATTsuse.de - rebuild rng schema from rnc data
Sat Feb 19 13:00:00 2011 msAATTsuse.de - cosmetic changes to the unit tests
* fixed the repo specification to point to online repo
* updated the description to indicate what the test does - improve the error message when an undefined profile is referenced - added check for a consistent setting of the patternType attribute value
Fri Feb 18 13:00:00 2011 msAATTsuse.de - v4.75 released
Fri Feb 18 13:00:00 2011 msAATTsuse.de - fixed default behavior for oem-swap. If not specified the default should be to create a swap partition. This was accidently changed
Fri Feb 18 13:00:00 2011 msAATTsuse.de - DB: fixed description about default partitions created
Fri Feb 18 13:00:00 2011 msAATTsuse.de - allow creation of ec2 format even without credentials. In that case only the adaptions to the root image will be made but the ec2-bundle process will be skipped
Fri Feb 18 13:00:00 2011 msAATTsuse.de - fixed use of uninitialized value in squashfs version check
Fri Feb 18 13:00:00 2011 msAATTsuse.de - DB: update documentation according to the pxe raid feature change
Fri Feb 18 13:00:00 2011 msAATTsuse.de - changed raid 1 support for pxe images. The former implementation can only use raid for the root partition. This implementation allows a custom partition table to be mapped in one raid 1 per partition
Wed Feb 16 13:00:00 2011 msAATTsuse.de - fixed linuxPartition() to be fine with a raid partition too
Wed Feb 16 13:00:00 2011 msAATTsuse.de - fixed raid partition setup. The wrong id was set. If there is only one raid partition on the disk fdisk doesn\'t require a number for the \'t\' command
Wed Feb 16 13:00:00 2011 msAATTsuse.de - DB: update documentation
Tue Feb 15 13:00:00 2011 msAATTsuse.de - restore copy of temporary files only if they are not provided by the overlay tree. This affects /etc/hosts and /etc/resolv.conf
Tue Feb 15 13:00:00 2011 msAATTsuse.de - fixed createSnapshotMap() to be able to setup snapshot tables multiple times in a row. this requires unique table names
Tue Feb 15 13:00:00 2011 msAATTsuse.de - fixed yast2 firstboot startup for old (sle10) init script based startup sequence (bnc #660770)
Tue Feb 15 13:00:00 2011 msAATTsuse.de - fixed build, unfortunately perl-Test-Unit doesn\'t exist in BS
Tue Feb 15 13:00:00 2011 msAATTsuse.de - added unit test framework and some XML validation tests
Tue Feb 15 13:00:00 2011 msAATTsuse.de - fixed typos in XMLValidator output. This is important for the unit test results
Tue Feb 15 13:00:00 2011 msAATTsuse.de - removed testsuite from kiwi. The current --testsuite mode has been removed because it has turned out that\'s it\'s unused code. With this testsuite it was possible to run scripts inside the kiwi created root tree and check their results. Basically this is only useful for testing the root tree integrity which can always be done outside of kiwi like studio and slepos does. Along with the change we will add unit tests for testing the XML error handling and I plan to integrate an end-to-end testng framework which allows to realy make sure the appliance works as expected
Mon Feb 14 13:00:00 2011 msAATTsuse.de - fixed location of radeon.ko (typo: missing drivers/)
Mon Feb 14 13:00:00 2011 msAATTsuse.de - added graphics cards direkt rendering modules for i915, nouveau and radeon for openSUSE 11.4
Fri Feb 11 13:00:00 2011 msAATTsuse.de - v4.74 released
Thu Feb 10 13:00:00 2011 msAATTsuse.de - removed split sections from oem examples, use the kiwi default split section for this examples
Thu Feb 10 13:00:00 2011 msAATTsuse.de - changed the filesystem type to ext3 for 11.2 oem example because we found issues with ext4 on 11.2
Thu Feb 10 13:00:00 2011 msAATTsuse.de - fixed __addDefaultSplitNode() function. A cloneNode() call is required if you add children from another DOM tree
Wed Feb 9 13:00:00 2011 msAATTsuse.de - speedup prepare step with caches by skipping the bootstrap installation. If there is a cache available we add the bootstrap packages into the image package section and run the rest of the installation procedure in one image installation step
Wed Feb 9 13:00:00 2011 msAATTsuse.de - make use of zypper\'s autorefresh feature and don\'t call zypper refresh manually anymore
Wed Feb 9 13:00:00 2011 adrianAATTsuse.de - offer options to ignore specified but missing packages for product generation
Wed Feb 9 13:00:00 2011 adrianAATTsuse.de - make a difference between arch modifiers (addarch and removearch) and usage of a package (no modifier). This solves the last problem for openSUSE biarch medias.
Tue Feb 8 13:00:00 2011 msAATTsuse.de - fixed netboot disk device check. In case of a ramdisk only configuration there is no DISK set but the image download should happen into the ramdisk device. Therefore the disk device check was enhanced to check the ramdisk setup too
Tue Feb 8 13:00:00 2011 adrianAATTsuse.de - fix arch= statement for real for multi arch medias, use only the subset of global required archs and filtered one by arch= statement
Tue Feb 8 13:00:00 2011 msAATTsuse.de - moved caching system over from clicfs to a device mapper snapshot table. This seems to be more stable and leaves more room for improvements
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de - Revert wrong commit overriding package attributes on multi arch medias This reverts commit 1ef1a8b62df61899480285051c9b725990685113.
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de - avoid error message about undefined $manager variable when building a product
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de ignore missing debug packages, they may not get generated (esp on noarch packages).
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de handle autodetected src packages with correct arch (src or nosrc)
Mon Feb 7 13:00:00 2011 msAATTsuse.de - DB: update documentation and examples due to new ec2region element
Mon Feb 7 13:00:00 2011 msAATTsuse.de - added support for the child element for . With this a user can specify one or multiple target regions for the EC2 image. Specifying multiple elements creates multiple AMIs. The main convenience is that one does not have to look for the aki-... cryptic name for the PVGrub boot kernel as the value gets embedded in the generated manifest. Supported values are: AP-Singapore, EU-West, US-East, US-West
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de support blacklisting of packages via onlyarch=\"\"
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de report about all missing packages and abort afterwards, not at the first missing package.
Mon Feb 7 13:00:00 2011 adrianAATTsuse.de take care about arch= package statement for product required architectures
Fri Feb 4 13:00:00 2011 msAATTsuse.de - v4.73 released
Fri Feb 4 13:00:00 2011 msAATTsuse.de - fixed typo in ec2 format creation (missing /)
Thu Feb 3 13:00:00 2011 msAATTsuse.de - fixed ec2 examples
Thu Feb 3 13:00:00 2011 msAATTsuse.de - DB: update ec2 docs and examples per request in (bnc #667303)
Thu Feb 3 13:00:00 2011 msAATTsuse.de - improved ec2 format creation per request in (bnc #667303)
Wed Feb 2 13:00:00 2011 msAATTsuse.de - provide partition info in MB instead of KB
Tue Feb 1 13:00:00 2011 msAATTsuse.de - update s390 boot code according to generic changes in the x86 boot code
Tue Feb 1 13:00:00 2011 msAATTsuse.de - added support for ppc images:
* added oemboot boot code
* added vmxboot boot code
* adapt kiwi for creation of ppc disk images
* adapt kiwi for creation of ppc install iso
* added suse-SLE11-JeOS template for ppc
* added support for lilo boot loader used for ppc
* changed spec file to build ppc packages
Tue Feb 1 13:00:00 2011 msAATTsuse.de - DB: update documentation: Added information about plain:// source - DB: update documentation: Improved smb:// paragraph
Tue Feb 1 13:00:00 2011 msAATTsuse.de - fixed squashfs version check
Tue Feb 1 13:00:00 2011 msAATTsuse.de - DB: update documentation, removed wrong version information
Tue Feb 1 13:00:00 2011 msAATTsuse.de - added support for plain:// url types. They forward the URL (everything following \"plain://\") unmodified to the package manager. This can be used if kiwi does not support a special URL but the package manager does
Tue Feb 1 13:00:00 2011 msAATTsuse.de - fixed smb mount. Leave // to indicate the share name and make sure we create a unique mount point with mktemp instead of using the share name as base
Tue Feb 1 13:00:00 2011 msAATTsuse.de - DB: update documentation from review
Mon Jan 31 13:00:00 2011 msAATTsuse.de - use -o guest option to mount a samba share without username and password specified
Mon Jan 31 13:00:00 2011 msAATTsuse.de - fixed use of profiled repository sections
Mon Jan 31 13:00:00 2011 msAATTsuse.de - DB: fixed typo: cifs-utils is required in bootstrap section
Mon Jan 31 13:00:00 2011 msAATTsuse.de - DB: added documentation about smb:// repo source type
Mon Jan 31 13:00:00 2011 msAATTsuse.de - added support for username and password in repository elements - enhanced cifs mount (smb://) to be able to use credentials
Mon Jan 31 13:00:00 2011 adrianAATTsuse.de - Fail hard on missing packages during product build. This is requested with high prio from coolo, we need to make this an option later on.
Fri Jan 28 13:00:00 2011 msAATTsuse.de - v4.72 released
Fri Jan 28 13:00:00 2011 msAATTsuse.de - run parted capability checks only if parted exists
Thu Jan 27 13:00:00 2011 msAATTsuse.de - fixed build for 11.4
Thu Jan 27 13:00:00 2011 msAATTsuse.de - added filesystem mktool vs. kernel module version check for the squashfs filesystem. The check has been added in the checkType() function
Thu Jan 27 13:00:00 2011 msAATTsuse.de - add support for smb:// type urls by supporting cifs mount
Wed Jan 26 13:00:00 2011 msAATTsuse.de - DB: fixed typo
Wed Jan 26 13:00:00 2011 msAATTsuse.de - DB: added patch from Franz Leitl, fixing some typos
Wed Jan 26 13:00:00 2011 msAATTsuse.de - added partition ID information into progress information when installing the system in partition install mode
Wed Jan 26 13:00:00 2011 msAATTsuse.de - fixed lvresize calls in kiwi which are all missing the \'+\' prefix - fixed createSnapshotMap() to know about LVM volumes - fixed partition based installation with LVM image. The dialog for boot and root partition selection was broken and there is also a small fix improving the progress information when installing the image partitions to the disk partitions
Tue Jan 25 13:00:00 2011 msAATTsuse.de - reverted the following commits: eeecf05d029e7e75abfc44a5c2c600263838c50e 438e83976cbd12dde20511ea5d000620082fa066 They broke the yast autoyast and firstboot setup. The provided config-yast-autoyast.xml or config-yast-firstboot.xml were not handled anymore
Mon Jan 24 13:00:00 2011 msAATTsuse.de - removed fdisk support entirely except for changing the partition table created by the isohybrid tool. parted can\'t handle that table and therefore we use fdisk inside the function createHybridPersistent() but nowhere else anymore
Mon Jan 24 13:00:00 2011 msAATTsuse.de - update schema and kiwi documentation
Mon Jan 24 13:00:00 2011 msAATTsuse.de - fixed mdadm --stop call for pxe raid(1) boot
Sun Jan 23 13:00:00 2011 msAATTsuse.de - check the return code for the image container mount call
Fri Jan 21 13:00:00 2011 msAATTsuse.de - v4.71 released
Fri Jan 21 13:00:00 2011 msAATTsuse.de - fixed partition selection in OEMFindPartitions(). Don\'t take any other than 0x83 partition types into account
Fri Jan 21 13:00:00 2011 msAATTsuse.de - change the layout of the install ISO / USB stick. The raw disk image on the install media was compressed using gzip. The downside is that it\'s not possible to loop mount the compressed file. But for partition based installations this is required. Therefore the raw disk image is now packed into a squashfs filesystem (bnc #665888)
Fri Jan 21 13:00:00 2011 msAATTsuse.de - fixed typos in kiwi_oemunattended and kiwi_oemswap evaluation which caused wrong content in the oemconfig file
Thu Jan 20 13:00:00 2011 msAATTsuse.de - added support for gparted in partition based oem installation If the partition table does not provide the correct layout we start a X session with some descriptive message window and the gparted tool to be able to change the partition table Author: Bernhard M. Wiedemann
Thu Jan 20 13:00:00 2011 msAATTsuse.de fix approx 109 typos
Thu Jan 20 13:00:00 2011 msAATTsuse.de - added check for $imageDiskDevice and the existence of $imageBootDevice to the setupBootPartition() function in order to prevent unused mount actions for /boot Author: Bernhard M. Wiedemann
Thu Jan 20 13:00:00 2011 msAATTsuse.de fixes from review
Thu Jan 20 13:00:00 2011 msAATTsuse.de - fixed skip check for firstboot and autoyast descriptions
Wed Jan 19 13:00:00 2011 msAATTsuse.de - added check which disallows white space in the value for the displayname attribute
Wed Jan 19 13:00:00 2011 msAATTsuse.de - fixed use of undefined value in KIWIXML.pm validation
Tue Jan 18 13:00:00 2011 msAATTsuse.de - added support for raid 1 (mirroring) for pxe images
Tue Jan 18 13:00:00 2011 msAATTsuse.de - fixed insertion of repo alias and priority commandline options into the correct section of the XML description.
Tue Jan 18 13:00:00 2011 msAATTsuse.de - dont\'t overwrite firstboot.xml or autoconf.xml if they exist as overlay files in the overlay root tree
Mon Jan 17 13:00:00 2011 msAATTsuse.de - create private __expandFS() function and eliminate some code duplication by this new function
Mon Jan 17 13:00:00 2011 msAATTsuse.de - added check for the PatternType attribute which may only be used for image and bootstrap packages. Check that this is set appropriately.
Sat Jan 15 13:00:00 2011 msAATTsuse.de - fixed typo in use of oem-shutdown element
Fri Jan 14 13:00:00 2011 msAATTsuse.de - fixed evalutation of patternType attribute
Thu Jan 13 13:00:00 2011 msAATTsuse.de - make sure fixupFDiskSectors() only fixes the first partition start sector and doesn\'t touch the others (bnc #664236)
Thu Jan 13 13:00:00 2011 msAATTsuse.de - make sure fixupFDiskSectors() is called on a non busy table (bnc #664236)
Thu Jan 13 13:00:00 2011 msAATTsuse.de - fixed fdisk setup in alignment mode. fdisk is not able to suggest the correct next sector if called with the option \"-u\". Therefore only one partition is created in that mode and the rest is created in fdisk cylinder based mode (bnc #664236)
Thu Jan 13 13:00:00 2011 msAATTsuse.de - added new module KIWILocator which perform operations to locate objects needed by Kiwi in the filesystem. Along with the new module other code parts which did that before has been replaced
Thu Jan 13 13:00:00 2011 msAATTsuse.de - added support for satsolver bindings provided with the perl-satsolver package
Mon Jan 10 13:00:00 2011 msAATTsuse.de - fixed syslinux/isolinux configuration for disk based images. Several problems like missing branding files, write checks in not existing directories and file checks in wrong directories were found
Mon Jan 10 13:00:00 2011 msAATTsuse.de - fixed syslinux/isolinux config for non graphics boot setup
Mon Jan 10 13:00:00 2011 msAATTsuse.de - minor clean up, remove match for yes
Fri Jan 7 13:00:00 2011 msAATTsuse.de - v4.70 released
Fri Jan 7 13:00:00 2011 msAATTsuse.de - fixed evaluation of kernelcmdline in createImageLiveCD()
Wed Jan 5 13:00:00 2011 adrianAATTsuse.de Make SUSE meta data compression rsyncable (partly transferable).
Wed Jan 5 13:00:00 2011 msAATTsuse.de - fixed setupKernelModules() in a way that it doesn\'t overwrite settings from /etc/sysconfig/kernel but append to them
Tue Jan 4 13:00:00 2011 msAATTsuse.de - revert last commit, broken patch
Tue Jan 4 13:00:00 2011 msAATTsuse.de - fix sed expression which removes the architecture suffix from the image name. The expression failed if the architecture is also part of the name so it changed to match the suffix at the end of the name string only
Tue Jan 4 13:00:00 2011 msAATTsuse.de - don\'t call setupConsole twice if systemIntegrity is fine in kiwi netboot code. Also make sure unsetFile(), called on the dhcp info file, is called before the interface is released
Tue Jan 4 13:00:00 2011 msAATTsuse.de - fixed releaseNetwork() to cleanup /dev/.sysconfig as well as unset the variables from the dhcp info file which has been exported into the root shell environment. Those variables caused conflicts with the network scripts in /etc/init.d
Tue Jan 4 13:00:00 2011 msAATTsuse.de - removed obsolete config file from suse-11.3/suse-live-stick
Mon Jan 3 13:00:00 2011 msAATTsuse.de - cleanup netboot code. moved some functions into the KIWILinuxRC.sh pool and fixed bootloader setup when using clicfs images
Mon Jan 3 13:00:00 2011 msAATTsuse.de - removed old and unmaintained ppc code
Wed Dec 22 13:00:00 2010 msAATTsuse.de - added check for first sector start after repartitioning via fdisk. The start sector must be the same before and after the repartitioning (bnc #659865)
Tue Dec 21 13:00:00 2010 msAATTsuse.de - make sure bootincluded packages and archives are not removed by the initrd strip down functions. This is done by introdudcing two new functions in KIWIConfig.sh:
* basePackBootIncludes
* baseUnpackBootIncludes whereas the first one packs the bootinclude files and the second one unpacks them again. The standard boot image descriptions provided by kiwi uses that functions to make sure all bootincluded files can be restored at the end of the strip down functions called in image.sh (bnc #660743)
Fri Dec 17 13:00:00 2010 msAATTsuse.de - v4.69 released
Wed Dec 15 13:00:00 2010 msAATTsuse.de - if ensconce is used the pattern/package list is already solved. In that case it doesn\'t make sense to do solving with satsolver again. We are using the list provided by ensconce as solved list directly in that case.
Wed Dec 15 13:00:00 2010 msAATTsuse.de - fixed ensconce call and parameters:
* ensconce now resides in /usr/bin, so we can call it that way
* pass -b parameter to ensconce, since bootstrap is obsolete
* pass proper root parameter to ensconce
Wed Dec 15 13:00:00 2010 msAATTsuse.de - fixed profile request handling when kiwi invokes itself
Wed Dec 15 13:00:00 2010 msAATTsuse.de - fixed functions ignoreRepositories() and addRepository to correctly update the DOM tree and not only the internal hash structures
Wed Dec 15 13:00:00 2010 msAATTsuse.de - fixed SLE11 template which did not include gfxboot branding packages if xenFlavour was selected
Mon Dec 13 13:00:00 2010 msAATTsuse.de - fixed warning message when using int() on empty string
Mon Dec 13 13:00:00 2010 msAATTsuse.de - fixed use of .buildenv
Fri Dec 10 13:00:00 2010 msAATTsuse.de - renamed modprobe.conf.local to modprobe.d/99-local.conf on systems which doesn\'t support the old conf file anymore
Fri Dec 10 13:00:00 2010 msAATTsuse.de - v4.68 released
Thu Dec 9 13:00:00 2010 msAATTsuse.de - fixed location of local modprobe configuration file. The new place is in /etc/modprobe.d/99-local.conf. Only if this doesn\'t exist we will use /etc/modprobe.conf.local
Wed Dec 8 13:00:00 2010 msAATTsuse.de - make baseSetupInPlaceGITRepository more useful
Wed Dec 8 13:00:00 2010 msAATTsuse.de - fixed initial value (set it to empty) for INITRD_MODULES
Wed Dec 8 13:00:00 2010 msAATTsuse.de - removed obsolete setImageType() function from KIWIXML
Wed Dec 8 13:00:00 2010 msAATTsuse.de - make use of the --check-config modus in kiwi to validate and check the kiwi provided XML configurations within the Makefile.
Wed Dec 8 13:00:00 2010 msAATTsuse.de - fixed suse-SLE11-JeOS to validate correctly. It\'s not allowed to have multiple import=\"true\" attributes set. Therefore the profile setup for this JeOS XML changed
Wed Dec 8 13:00:00 2010 msAATTsuse.de - added Option --check-config which validates the XML using the new KIWIXMLValidator module. Along with the new module validation from KIWIXML has been moved into the KIWIXMLValidator object
Wed Dec 8 13:00:00 2010 msAATTsuse.de - fixed use of createImageUSB() which has changed its name into createImageRootAndBoot()
Tue Dec 7 13:00:00 2010 msAATTsuse.de - fixed boot partition setup for non mkinitrd supported setups
Tue Dec 7 13:00:00 2010 msAATTsuse.de - added updateTypeList() function in KIWIXML which is required if an accessor function changes the XML tree the internal data structures needs to be updated too
Tue Dec 7 13:00:00 2010 msAATTsuse.de - don\'t overwrite the zypp repo data when in recovery mode (bnc #657922)
Mon Dec 6 13:00:00 2010 msAATTsuse.de - fixed cache creation
Mon Dec 6 13:00:00 2010 adrianAATTsuse.de fix build for factory (openSUSE 11.4)
Mon Dec 6 13:00:00 2010 msAATTsuse.de - added KIWIXML methods __populateProfiles() and __populateTypeInfo which are gathering the profile and type information as they are set by the XML description. Along with this change the following methodes have changed: __populateDefaultProfiles and __populateProfiledTypeInfo. They both read the data structures created by the first two and assign a new data structure according to the selected profiles.
Mon Dec 6 13:00:00 2010 msAATTsuse.de - removed unneeded KIWIXML instance from KIWIBoot. The KIWIBoot constructor creates one instance of KIWIXML which is sufficient for all operations
Mon Dec 6 13:00:00 2010 msAATTsuse.de - fixed parameter list in \'new KIWIXML\' instances
Sat Dec 4 13:00:00 2010 msAATTsuse.de - fixed repository update in __updateDescriptionFromChangeSet()
Fri Dec 3 13:00:00 2010 msAATTsuse.de - v4.67 released
Fri Dec 3 13:00:00 2010 msAATTsuse.de - make addDefaultSplitNode() a private helper method called __addDefaultSplitNode(). Also fixed that function to work correctly. It should add the default split mode for all relevant types (iso and split) and add the section only if those types doesn\'t already implement a split section
Thu Dec 2 13:00:00 2010 msAATTsuse.de - cleanup KIWIImage and main kiwi code. The global variables ForeignRepo and ImageName has been removed. Additionally the KIWIXML constructor doesn\'t have the ForeignRepo hash in its parameter list. Inside KIWIXML the entire foreign data setup has been changed into methods creating and applying a changeset. Therefore a temporary global hash XMLChangeSet has been introduced. After apply of the changeset it will be removed directly. Along with the cleanup the creation and check for boot and prebuilt images has been moved into functions. The preparation step of kiwi now also writes back the internal XML changes into the XML file. Last but not least the global variable ImageDescription has been introduced which stores in prepare and create mode the path to the base image description which is required to know the location of bootincluded archives and this:// repos
Wed Dec 1 13:00:00 2010 msAATTsuse.de - removed xml inheritance. This feature was never used
Tue Nov 30 13:00:00 2010 msAATTsuse.de - restructured XML data processing by adding the following KIWIXML methods: __populateTypeInfo() and __populateImageTypeAndNode() The first method creates the %typeInfo hash which contains all possible elements according to the selected profiles. The second method operates on the %typeInfo hash and initializes those part of the hash which represents the requested image type or the primary type or the first type read in. Both methodes are called only _once_ inside the object constructor. The existing method getImageTypeAndAttributes() has changed to simply return the selected part of the %typeInfo hash and does _not_ change any object data as done before.
Tue Nov 30 13:00:00 2010 msAATTsuse.de - added check that only one type with image=\"myName\" exists per
Tue Nov 30 13:00:00 2010 msAATTsuse.de - fixed use of uninitialized value in KIWIXML processing
Mon Nov 29 13:00:00 2010 msAATTsuse.de - if logfile option is specified along with --init-cache set the logfile to the \'terminal\' mode. That\'s because in that mode multiple logfiles per cache are created and it wouldn\'t make much sense to have them in one file. If the output is on the terminal the user can decide himself for the redirection
Mon Nov 29 13:00:00 2010 msAATTsuse.de - require clicfs >= 1.3.9 due to major bugs in former versions
Mon Nov 29 13:00:00 2010 msAATTsuse.de - fixed __checkReferencedProfDefined to work with sections defining more than one profile like netboot does
Mon Nov 29 13:00:00 2010 msAATTsuse.de - fixed invalid numeric expression in reqProfiles - added __populateDefaultProfiles according to XML restructuring and removed setDefaultProfiles
Mon Nov 29 13:00:00 2010 msAATTsuse.de - fixed use of uninitialized value in KIWIXML.pm
Fri Nov 26 13:00:00 2010 msAATTsuse.de - v4.66 released
Fri Nov 26 13:00:00 2010 msAATTsuse.de - fixed use of undefined value as an ARRAY reference
Fri Nov 26 13:00:00 2010 msAATTsuse.de - removed unused cleanInitrd() function
Fri Nov 26 13:00:00 2010 msAATTsuse.de - make sure bootstrap packages are handled when using a cache - fixed time when KIWIImage.pm mounts the overlay and provide a function getImageTree() which returns the currently used root tree. Move the recovery creation, profile update, and cleanup after the KIWIImage module creation
Fri Nov 26 13:00:00 2010 msAATTsuse.de - fixed overlay setup for KIWIBoot modules. Only if a cow file exists in the given system image path it\'s required to setup the overlay mount
Fri Nov 26 13:00:00 2010 msAATTsuse.de - don\'t create new kiwi object if there is already one available
Thu Nov 25 13:00:00 2010 msAATTsuse.de - check image type only if a preferences section is present
Thu Nov 25 13:00:00 2010 msAATTsuse.de - fixed profile check in create mode
Thu Nov 25 13:00:00 2010 msAATTsuse.de - cleanup xenconfig setup by removing conditions that no longer apply due to the removal of the xen image type which is now handled by the vmx/oem type flavoured with xen and xenk profiles
Thu Nov 25 13:00:00 2010 msAATTsuse.de - make sure the package manager is added only once to the list when in --info mode
Thu Nov 25 13:00:00 2010 msAATTsuse.de - fixed dumpsolv regexp which searches for pattern names
Thu Nov 25 13:00:00 2010 msAATTsuse.de - fixed creation of boot image caches. It\'s required to prevent the kernel extraction from the cache because this is done in the preparation process which uses the cache - don\'t allow logfile option when in init-cache mode. This is because each cache has its own logfile living in the cache directory
Thu Nov 25 13:00:00 2010 msAATTsuse.de - fixed minor code duplication inside the RNC schema
Thu Nov 25 13:00:00 2010 msAATTsuse.de - deactivate compression for clicfs caches (faster) - fixed and cleaned up profile evaluation and use
Thu Nov 25 13:00:00 2010 adrianAATTsuse.de make \"mk_listings\" call during product generation optional
Thu Nov 25 13:00:00 2010 msAATTsuse.de - explicitly call SuSEconfig --module permissions. This module is no longer called by the default SuSEconfig call so we need to call it directly
Wed Nov 24 13:00:00 2010 msAATTsuse.de - added the following consistency checks:
* only 1 profile may be marked as default via import=\"true\"
* only 1 type per spec may be set as default via primary=\"true\"
* only 1 spec may reference 1
* only 1 specification without a profiles=... attribute
* check that all references used via profiles=\"aName\" attribute have a definition of
Wed Nov 24 13:00:00 2010 msAATTsuse.de - require specific clicfs version because the version before has severe problems when writing to a cow file
Tue Nov 23 13:00:00 2010 msAATTsuse.de - don\'t preserve rpm database on recovery. This could cause an inconsistent rpm database. Not preserving it could cause an incomplete but consistent database which is better. For reference a copy of the old database is stored in /var/lib/rpm.backup
Mon Nov 22 13:00:00 2010 msAATTsuse.de - follow up: make sure system filesystems and mount options corresponds with the default settings we use in a standard installation with yast
Mon Nov 22 13:00:00 2010 msAATTsuse.de - fixed cleanImage() function to cleanly umount partitions before calling init. Also make sure cleanImage reports its actions as part of the boot.kiwi logfile - make sure system filesystems and mount options corresponds with the default settings we use in a standard installation with yast
Mon Nov 22 13:00:00 2010 msAATTsuse.de - fixed typo in option description
Fri Nov 19 13:00:00 2010 msAATTsuse.de - v4.65 released
* rebuild documentation
* rebuild schema documentation
Fri Nov 19 13:00:00 2010 msAATTsuse.de - added an oem hook named: preCallInit which runs right before init is called or in case of a reboot/halt request right before that reboot (bnc #654404)
Fri Nov 19 13:00:00 2010 msAATTsuse.de - make sure /dev is bind mounted when installing the very first bootstrap packages.
Thu Nov 18 13:00:00 2010 msAATTsuse.de - DB: update documentation
Wed Nov 17 13:00:00 2010 msAATTsuse.de - put package manager into solver list when calling kiwi --select ... --info packages - fixed clicfs mount in cache mount code:
* we don\'t want reserved blocks
* we don\'t want automatic filesystem check
* we don\'t want to use --ignore-cow-errors - deactivate automatic cache creation and introduce a new operation mode called kiwi --init-cache. Caches needs to be created in a separate call. This has turned out to be more flexible and prevent customer confusion - add default cache image location: /var/cache/kiwi/image which can be overwritten by the --cache option. If one want to use caches in prepare or create mode it\'s required to select the cache location with this option. - removed baseroot attribute and defaultbaseroot element from XML description. baseroot has been replaced by the clicfs based caching process - don\'t leave .broken inside the tree if it is not broken - cleanup the overlay preparation code. The code is in KIWIOverlay.pm exclusively. At each code point which requires it we create a KIWIOverlay object and let it control the overlay mount
Wed Nov 17 13:00:00 2010 msAATTsuse.de - DB: add documentation about PXE hardware maps
Wed Nov 17 13:00:00 2010 msAATTsuse.de - update documentation for oem-unattended mode
Wed Nov 17 13:00:00 2010 msAATTsuse.de - if in oem-unattended mode and we found more than one disk for installation, use the first disk found by hwinfo
Wed Nov 17 13:00:00 2010 msAATTsuse.de - fix bug in the format conversion from raw to qcow2. The \'convert\' command to qemu-mig was missing.
Wed Nov 17 13:00:00 2010 msAATTsuse.de - move the two consistency checks (kiwirevision and version format) out of the KIWIXML constructor and into their own methods - Implement a new consistency check, __checkFilesysSpec(). This method assures that the \'filesystem\' attribute is used for image types that require the attribute
Tue Nov 16 13:00:00 2010 msAATTsuse.de - fixed creation and use of kiwi caches for boot images also make sure the same clicfs cache is mounted only once and is released in case of an exception
Tue Nov 16 13:00:00 2010 msAATTsuse.de - netboot: fixed incorporation of hardware maps - netboot: evaluate additional VENDOR_CONF value
Tue Nov 16 13:00:00 2010 msAATTsuse.de - fixed use of uninitialized variable AATTconfigNodes - fixed solvable setup for susetags
Tue Nov 16 13:00:00 2010 msAATTsuse.de - update RNG schema due to last change to the RNC schema
Tue Nov 16 13:00:00 2010 msAATTsuse.de - added new element text which allows the user to specify raw text that ends up in the .vmx or .xenconfig file. Certain default options currently written by Kiwi may be over written by these settings. Therefore the use of this option happens on your own risk. No validation of the raw text is performed.
Mon Nov 15 13:00:00 2010 msAATTsuse.de - verify format used for the mac address when specifying the attribute on the vmnic element.
Mon Nov 15 13:00:00 2010 msAATTsuse.de - fixed logging for listXMLInfo()
Mon Nov 15 13:00:00 2010 msAATTsuse.de - move the XML validation and loading to it\'s own methods - added image consistency checks into KIWIXML as addition to the XSLT stylesheet processor. The function __validateConsistency provides a place to add consistency checks:
* Added check: __checkPostDumpAction which ensures that only one of oem-bootwait, oem-reboot, oem-reboot-interactive, oem-shutdown or oem-shutdown-interactive is specified.
Mon Nov 15 13:00:00 2010 msAATTsuse.de - added return string to partitionSize() function even in case of error
Mon Nov 15 13:00:00 2010 msAATTsuse.de - added bc tool to netboot image descriptions
Thu Nov 11 13:00:00 2010 msAATTsuse.de - allow boottimeout setup for image=\"iso\" too
Wed Nov 10 13:00:00 2010 msAATTsuse.de - added xsl stylesheet to convert images which uses the image=\"xen\" type into an appropriate image=\"vmx\" type because the xen image type was removed. Additionally increased schema version to v5.0 with this change
Tue Nov 9 13:00:00 2010 msAATTsuse.de - netboot: added support for hardware maps. Hardware maps are configuration files for a given range of MAC addresses. If a client of the specified range boots up the corresponding hardware map file will be loaded and merged with the default configuration. That way you can specify in one config file configurations dedicated to different machines. Example config. ... HARDWARE_MAP=\"vendor1, vendor2, vendor3\" vendor1_HARDWARE_MAP=\"xx:xx:xx:xx:xx:x1, xx:xx:xx:xx:xx:x2\" ... if client xx:xx:xx:xx:xx:x1 boots up the file hardware_config.vendor1 is additionally loaded from the pxe boot server
Mon Nov 8 13:00:00 2010 msAATTsuse.de - fixed doit OBS script to work with branch names different from \'kiwi\'
Sun Nov 7 13:00:00 2010 msAATTsuse.de - more flexible post dump behavior:
* Fix misnomer of oem-dumphalt, now called oem-bootwait xslt included, no change in functionality from oem-dumphalt
* Add oem-reboot-interactive post a message before rebooting the system after image expansion wait for user interaction
* Add oem-shutdown power the system off after dump and image expansion are complete
* Add oem-shutdown-interactive post a message before system power off, wait for user interaction
Sun Nov 7 13:00:00 2010 msAATTsuse.de - word-smithing for images.sh and config.sh doc
Fri Nov 5 13:00:00 2010 msAATTsuse.de - v4.64 released - rebuild documentation - rebuild schema documentation
Fri Nov 5 13:00:00 2010 msAATTsuse.de - added a command line argument to sepecify the default \'yes\' answer for questions which could come up during the build process
Fri Nov 5 13:00:00 2010 msAATTsuse.de - changed partition layout of LVM based vmx/oem images. The boot partition is now the first partition and we will use only one partition for the entire LVM as second partition (bnc #651331)
Fri Nov 5 13:00:00 2010 msAATTsuse.de - fixed compare statement, in perl \'eq\' for strings must be used
Thu Nov 4 13:00:00 2010 msAATTsuse.de - added 11.4 JeOS to spec file
Thu Nov 4 13:00:00 2010 msAATTsuse.de - added templates and boot image descriptions for SuSE 11.4 - removed doc/examples/suse-11.1
Thu Nov 4 13:00:00 2010 msAATTsuse.de - fixed format conversion checks. iso type can\'t be converted
Thu Nov 4 13:00:00 2010 msAATTsuse.de - fixed checkLVMbind() function to activate volume groups before checking the device mapper nodes
Wed Nov 3 13:00:00 2010 msAATTsuse.de - fixed check for xvc/hvc consoles (bnc #650667)
Tue Nov 2 13:00:00 2010 msAATTsuse.de - keeping old boot files in /boot and trying to copy in newly generated initrd + kernel during image startup could result in not enough space on /boot partition for LVM enabled builds. This patch fixes that by removing the old kernel + initrd, before copying in the new one.
Tue Nov 2 13:00:00 2010 msAATTsuse.de - added languages nb_NO,da_DK,pt_PT and en_GB to the selection list
Tue Nov 2 13:00:00 2010 msAATTsuse.de - support multiple vmnic elements for VMware
Mon Nov 1 13:00:00 2010 msAATTsuse.de - added support for the XFS filesystem
Mon Nov 1 13:00:00 2010 msAATTsuse.de - fixed the schema inplace dochint for the oem-dumphalt element - rebuild documentation
Mon Nov 1 13:00:00 2010 msAATTsuse.de - don\'t let the recovery partition grow to the rest disk space available. This is not intended as the recovery partition should only be of the min size required to store the recovery data
Fri Oct 15 14:00:00 2010 msAATTsuse.de - v4.63 released - rebuild documentation - rebuild schema documentation
Fri Oct 15 14:00:00 2010 msAATTsuse.de - fixed repartition code, out of bounds partitioning
Thu Oct 14 14:00:00 2010 msAATTsuse.de - added setupConsole() function to activate xvc and/or hvc consoles if their device nodes are present
Wed Oct 13 14:00:00 2010 msAATTsuse.de - fixed xenconfig creation, virtual framebuffer line wasn\'t written
Wed Oct 13 14:00:00 2010 msAATTsuse.de - fixed suse-11.3/suse-xen-guest example by removing some old static sysconfig files. Also remove the boot.xen service script it\'s no longer required as we can use the xvc device for the console
Wed Oct 13 14:00:00 2010 msAATTsuse.de - added support for targetdevice option for filesystem images - if the targetdevice option is used check if the device exists before proceeding
Tue Oct 12 14:00:00 2010 msAATTsuse.de - make sure volume is active again if no LVM repartition takes place. This is because recreateVTOCTable has deactivated the volume group before
Tue Oct 12 14:00:00 2010 rootAATTsuse.de - fixed LVM based repartition code for s390 and DASD, it\'s required to recreate the VTOC table here before you can create new partitions
Tue Oct 12 14:00:00 2010 msAATTsuse.de - fixed creation of VTOC table; close active device maps first
Mon Oct 11 14:00:00 2010 msAATTsuse.de - fixed spec file requirements, grub and clicfs only exists on ix86 and x86_64
Mon Oct 11 14:00:00 2010 msAATTsuse.de - fixed use of satsolver if ensconce is used together with pattern names. ensonce uses an already resolved manifest file and thus it\'s not required to solve the patterns via satsolver (bnc #643442)
Mon Oct 11 14:00:00 2010 msAATTsuse.de - changed the lvmvolumes section into systemdisk like the following example shows: ...
- update to new schema version 4.8 due to the systemdisk change - if systemdisk is specified a lvm setup is implicitly requested. Therefore also the attribute \'lvm\' from the type section was removed - Also the oem-home element was removed with this change. A volume instead of a single partition should be used. - wrote a xslt stylesheet for the following conversions:
* remove lvm attribute
* move lvmvolumes element into systemdisk
* move lvmgroup attribute into name
* if oem-home is set create a systemdisk setup with a home volume - update documentation due to the systemdisk change
Fri Oct 8 14:00:00 2010 msAATTsuse.de - v4.62 released - rebuild documentation
Thu Oct 7 14:00:00 2010 msAATTsuse.de - added vfb (virtual framebuffer configuration) to the xenconfig file written by kiwi. This allows easy graphics console access with the virt-viewer program. If you want to run the xen domU in text mode you have to manually pass the option xencons=tty in the pygrub boot menu
Thu Oct 7 14:00:00 2010 msAATTsuse.de - added egrep for dasd_configure to initrd - fixed the creation of the boot partition if a real targetdevice is used to prevent using the entire rest space for the boot image
Thu Oct 7 14:00:00 2010 rootAATTsuse.de - fixed boot device detection for zipl on dasd devices with LVM
Thu Oct 7 14:00:00 2010 msAATTsuse.de - removed xencons boot option for domU creation in .xenconfig and from the bootloader kernel options (bnc #644138)
Thu Oct 7 14:00:00 2010 msAATTsuse.de - update and rebuild documentation
Thu Oct 7 14:00:00 2010 msAATTsuse.de - added support for setting up the boottimeout value prior to the default value in the config.xml section. the unit for the timeout value is seconds if grub is used as the boot loader and 1/10 seconds if syslinux is used ...
Thu Oct 7 14:00:00 2010 msAATTsuse.de - call udevPending before checking /sys/bus/usb/devices
Mon Oct 4 14:00:00 2010 msAATTsuse.de - DB: Deleted kiwi-doc-intro.xml and moved content to kiwi-doc-workflow.xml - DB: Removed xinclude of kiwi-doc-intro.xml from kiwi-doc.xml
Fri Oct 1 14:00:00 2010 msAATTsuse.de - v4.61 released - rebuild documentation
Fri Oct 1 14:00:00 2010 msAATTsuse.de - fixed creation of install CD if syslinux is used. - fixed syslinux dosfs boot partition setup by adding the dosfstools package to the oemboot image descriptions
Thu Sep 30 14:00:00 2010 msAATTsuse.de - fixed OEMRepartStandard(). Additionally to the last commit, fixed the use of the suggested last cylinder for swap and recovery only if no oem-systemsize is set
Thu Sep 30 14:00:00 2010 msAATTsuse.de - fixed OEMRepartStandard() to use the suggested last cylinder for the last partition to become created instead of a fixed value. Also use the suggested last cylinder for the resize of the root partition if there is no other partition to become created and no oem-systemsize was specified
Mon Sep 27 14:00:00 2010 msAATTsuse.de - fixed typo in DHCPCD option test
Mon Sep 27 14:00:00 2010 msAATTsuse.de - added support for partition alignment with fdisk. Thus support for 4k-sector size disks (logical 512 byte) with fdisk was added when using parted the -align option is used in any case though. In order to use the alignment when fdisk is used the oemconfig element oem-align-partition must be set to \'true\' (bnc #637333)
Thu Sep 16 14:00:00 2010 msAATTsuse.de - removed umount -a call to prevent a read-only remount (bnc #635159)
Thu Sep 16 14:00:00 2010 msAATTsuse.de - fixed searchGroupHardwareAddress() parameter list. mac_list must be a quoted string otherwise only the first entry is evaluated
Wed Sep 15 14:00:00 2010 msAATTsuse.de - use $main::Gzip for compressing the recovery tarball
Wed Sep 15 14:00:00 2010 msAATTsuse.de - moved hooks directory to kiwi-hooks - added and documented new hooks for oemboot preHWdetect,preImageDump,postImageDump
Wed Sep 15 14:00:00 2010 msAATTsuse.de - DB: Fixed typo in xsl:import: instead xsl-ns it should be xsl in the URI - DB: Added option --nonet for xmllint and xsltproc to avoid opening a network connection (should be done through XML catalogs)
Tue Sep 14 14:00:00 2010 msAATTsuse.de - fixed foreign lvm attribute setup, a value must be set - fixed setForeignTypeAttribute() to display the attribute value
Tue Sep 14 14:00:00 2010 rootAATTsuse.de - added support for s390 DASD repartitioning
Tue Sep 14 14:00:00 2010 msAATTsuse.de - added \'rt\' kernel-rt profile for isoboot, netboot, usbboot and vmxboot too (bnc #639217)
Tue Sep 14 14:00:00 2010 msAATTsuse.de - DB: rebuild documentation - DB: Enhanced manpages with more tags, unified spelling of KIWI, splitted para in separate paragraphs - DB: fixed callout lists for PDF creation
Tue Sep 14 14:00:00 2010 msAATTsuse.de - fixed --bootstick creation. Don\'t dump an image file when writing to the stick. Fixed image type setup when usbboot is used
Mon Sep 13 14:00:00 2010 msAATTsuse.de - According to the documentation [1], parted uses SI prefixes when reporting sizes. Cylinder size is thus reported in 1000 Bytes, not 1024 Bytes. This caused partitions which were created using cylinder offsets to have a wrong size. This patch fixes that by correcting constants in offset calculation. It also removes the magic multiplication constant used when creating LVM volumes.
Fri Sep 10 14:00:00 2010 msAATTsuse.de - added \'rt\' profile for oemboot pointing to kernel-rt (bnc #638512)
Fri Sep 10 14:00:00 2010 msAATTsuse.de - DB: added doc hint about the use of multiple DVD\'s
Fri Sep 10 14:00:00 2010 msAATTsuse.de - fixed disk increase per LVM volume (bnc #587361)
Fri Sep 10 14:00:00 2010 msAATTsuse.de - v4.59 released
Fri Sep 10 14:00:00 2010 msAATTsuse.de - DB: fixed Makefile to update Revision.txt from spec file version
Fri Sep 10 14:00:00 2010 msAATTsuse.de - DB: Added s > ... and similar entries
Thu Sep 9 14:00:00 2010 msAATTsuse.de - allow the qeth parameters to be set via the kernel commandline too for the s390/suse-SLE11-JeOS image. Detailed information about kernel parameters for this image can be found in the s390/suse-SLE11-JeOS/README
Thu Sep 9 14:00:00 2010 msAATTsuse.de - fixed mount() function to work with disk files too
Thu Sep 9 14:00:00 2010 msAATTsuse.de - if the --targetdevice option is set, create the image file by dumping bytes from the targetdevice. Also make sure the free space of the filesystem on the targetdevice is filled with zero bytes to gain a better compression result of the image file. --targetdevice is currently used for s390 DASD devices
Thu Sep 9 14:00:00 2010 msAATTsuse.de - fixed suseSetupProduct looking for a SUSE_ prefix too (bnc #637996)
Thu Sep 9 14:00:00 2010 msAATTsuse.de -DB: pxe: fixed some spelling and gramatical errors -DB: Enabled mini tocs for chapters and appendices -DB: Chapter and appendix titles are in the format \"Number Title\" now -DB: Removed \"Appendix\" from kiwi-doc-appendix.xml -DB: Added more comments in fo/docbook.xsl
Wed Sep 8 14:00:00 2010 msAATTsuse.de - DB: Reduced size of description.png image - DB: Converted informaltable to table, added xref - DB: Improved toc: Make chapters and appendices bold - DB: Activated numbering of sections - DB: Make s title consistent with HTML
Wed Sep 8 14:00:00 2010 msAATTsuse.de - removed unused root.tar.gz files in JeOS descriptions - added dasd_configure and qeth_configure to initrd - fixed check for kiwi_lvm variable - added functions isVirtioDevice and isDASDDevice to check for these devices. - added runPreinitServices to call scripts in /etc/init.d/kiwi/$service/ *.sh - adapt s390 JeOS template to use preinit service scripts. This system should can be used to setup the hvc console for kvm as well as the network setup on a s390 guest system
Tue Sep 7 14:00:00 2010 msAATTsuse.de - moved documentation from LaTeX to DocBook, PDF and HTML provided
Tue Sep 7 14:00:00 2010 rootAATTsuse.de - fixed s390 support for DASD devices. The main problem here is the detection of the disk. kiwi stores the busid value from the disk it used to create the image on in the kernel cmdline. We also had to add a function which set this disk online before we can access it via the device node
Tue Sep 7 14:00:00 2010 rootAATTsuse.de - added hint about hvc console usage in README of s390 JeOS template
Tue Sep 7 14:00:00 2010 msAATTsuse.de - fixed fdasd input to use partition id=1 if LVM=8e was requested
Tue Sep 7 14:00:00 2010 msAATTsuse.de - pxe: added support for non-contiguous MAC/IP grouping (bnc #636692) - pxe: added documentation for MAC/IP grouping
Tue Sep 7 14:00:00 2010 msAATTsuse.de - fixed s390 vmxboot and oemboot boot images to contain the drivers/s390 kernel modules which are required for DASD and other s390 specific devices
Tue Sep 7 14:00:00 2010 msAATTsuse.de - DB: added make check target to docbook Makefile
Mon Sep 6 14:00:00 2010 rootAATTsuse.de - added support for fdasd partitionier - fixed installation of zipl.conf when writing into real device
Mon Sep 6 14:00:00 2010 msAATTsuse.de - allow the kernelCheck function to reboot via kexec (bnc #636406)
Mon Sep 6 14:00:00 2010 msAATTsuse.de - DB: added missing dashes, resp. replaced with correct option dashes - DB: added set monospace.properties attribute for fo creation - DB: added common table id\'s
Fri Sep 3 14:00:00 2010 msAATTsuse.de - DB: added fop configuration for PDF font setup
Fri Sep 3 14:00:00 2010 msAATTsuse.de - allow boot disk creation to work from real devices too
* setupBootDisk(),setupInstallCD and setupInstallStick() can operate on real disk devices too
* changed setupBootStick to call setupBootDisk with the selected stick device as parameter
* added a destructor function in KIWIBoot to cleanup all created tmp directories after the object is no longer in use. Prevent all clean * function to remove and tmp dir
* cleanup KIWIBoot: removed cleanTmp function
* cleanup KIWIBoot: moved kpartx calls into function
* cleanup KIWIBoot: moved stick search into function
Fri Sep 3 14:00:00 2010 msAATTsuse.de - DB: added IDs for all sect{1,2,3}, procedures, tables and figures
Fri Sep 3 14:00:00 2010 msAATTsuse.de - DB: added \'man\' target to create man pages
Fri Sep 3 14:00:00 2010 msAATTsuse.de - DB: changed all : options from -bob to --bob - DB: added new stylesheet for html: xslt/html/docbook.xsl - DB: adapt Makefile according to new stylesheet - DB: update CSS from Andy - DB: fixed kiwi-man- *.xml: added id-Attribut, common name kiwi,Kiwi -> KIWI used, added s for filenames
Thu Sep 2 14:00:00 2010 msAATTsuse.de - DB: fixed some commandline parameter dashes - DB: added title page for PDF
Thu Sep 2 14:00:00 2010 msAATTsuse.de - DB: fixed man page template titles - DB: fixed Makefile, add kiwi-doc.xml to source files - DB: enabled index page creation
Thu Sep 2 14:00:00 2010 msAATTsuse.de - DB: update documentation, pictures and the DocBook README file
Thu Sep 2 14:00:00 2010 msAATTsuse.de - use $SERVER server ip for NFS or NBD root server if not specified in NBDROOT/NFSROOT
Thu Sep 2 14:00:00 2010 msAATTsuse.de - added check for dhcpcd options. On sle10 we don\'t have the options -p or --noipv4ll
Thu Sep 2 14:00:00 2010 msAATTsuse.de - DB: added index page to docbook source - DB: fixed Makefile for building book
Wed Sep 1 14:00:00 2010 msAATTsuse.de - better Makefile for docbook book creation. Added pictures which are currently embedded as PNG\'s. This needs to be improved though
Wed Sep 1 14:00:00 2010 msAATTsuse.de - started conversion of the documentation from LaTeX to DocBook. This first version is still missing a few things, therefore the LaTeX source is still in place and preferred
Tue Aug 31 14:00:00 2010 msAATTsuse.de - make sure the lvm attribute is part of the .profile environment of the kiwi boot images. The value is exported as $kiwi_lvm. The searchVolumeGroup() function only operates if kiwi_lvm is set to true - moved the message text \'Searching for $VGROUP volume group\' into the searchVolumeGroup() function and remove it from all boot image linuxrc\'s
Tue Aug 31 14:00:00 2010 msAATTsuse.de - LVM: added 1% spare space for each volume to store the metadata
Mon Aug 30 14:00:00 2010 msAATTsuse.de - prevent dd output on stderr when checking the boot sector
Mon Aug 30 14:00:00 2010 msAATTsuse.de - fixed check for boot sector inclusion
Mon Aug 30 14:00:00 2010 msAATTsuse.de - update documentation
Mon Aug 30 14:00:00 2010 msAATTsuse.de - copy license files into the system if found on one of the specified repos. The first repo which provides a license.tar.gz is the one which is used (bnc #633664)
Mon Aug 30 14:00:00 2010 msAATTsuse.de - added sync call before umounting the filesystems. Reasons for this workaround is the kernel problem in (bnc #15906)
Fri Aug 27 14:00:00 2010 msAATTsuse.de - don\'t call the grub binary from the image this could lead to problems when the grub binary is linked against a library which doesn\'t exist on the build machine. Therefore we use the grub binary installed on the build machine (kiwi requires grub for vmx and oem now) and bind mount the grub stage files in boot/grub from the image to the build machine while grub is called
Fri Aug 27 14:00:00 2010 msAATTsuse.de - v4.58 released
Fri Aug 27 14:00:00 2010 msAATTsuse.de - make use of the mkfs.$FS toolset instead of mk2fs with parameters This is more compatible and also prevents us from dealing with the changed meanings of some mk2fs parameters (bnc #635052)
Thu Aug 26 14:00:00 2010 msAATTsuse.de - fixed convert39to41.xsl to insert xenconfig and vmwareconfig sections also for iso image type
Thu Aug 26 14:00:00 2010 msAATTsuse.de - added parted as requirement for kiwi-desc-oem|vmxboot
Wed Aug 25 14:00:00 2010 msAATTsuse.de - fixed yum package check. the \'list available\' command is not suitable for already installed packages. Therefore we use \'list all\' which also works for already installed packages
Wed Aug 25 14:00:00 2010 msAATTsuse.de - changed iso image type for RHEL template to use clicfs instead of squashfs
Wed Aug 25 14:00:00 2010 msAATTsuse.de - added clicfs for RHEL 5.4 to kiwi rhel repo
Wed Aug 25 14:00:00 2010 msAATTsuse.de - fixed clicfs mount by not using losetup on the clicfs file before mounting it via the clicfs command. The clicfs command now get the clicfs file directly. Problem here was that with a loop clicfs is no longer able to read the size of the clicfs file which results in unexpected behavior (bnc #629543) - Related to that fix clicfs based caching now works stable
Wed Aug 25 14:00:00 2010 msAATTsuse.de - call dhcpcd with the option --noipv4ll to be able to check the return code of dhcpcd and to prevent the interface from an ip address if there was a DHCP timeout (bnc #634057)
Wed Aug 25 14:00:00 2010 msAATTsuse.de - added package/group check before yum is called to install packages/groups. This is done because there are yum versions which silently ignore missing items and proceed installing the rest.
Tue Aug 24 14:00:00 2010 msAATTsuse.de - fixed message about package installation when using ensconce The problem was that it prints always the same message about installing bootstrap packages even in non-chroot mode
Tue Aug 24 14:00:00 2010 msAATTsuse.de - don\'t check the return code of dhcpcd it\'s always zero. Therefore the check has been changed to check for the creation of the /var/lib/dhcpcd/dhcpcd-$PXE_IFACE.info file (bnc #634057)
Mon Aug 23 14:00:00 2010 msAATTsuse.de - added setup to templates. Use utc by default
Mon Aug 23 14:00:00 2010 msAATTsuse.de - allow setup of HWCLOCK in /etc/sysconfig/clock via the preferences element utc|localtime
Mon Aug 23 14:00:00 2010 msAATTsuse.de - RHEL: fixed URL quoting when building with yum - RHEL: added alternative search path for isolinux.bin
Mon Aug 23 14:00:00 2010 msAATTsuse.de - v4.57 released
Fri Aug 20 14:00:00 2010 msAATTsuse.de - fixed etc/motd for suse-11.3-JeOS. It was still saying this is a 11.2 system, cut&paste bug :-)
Fri Aug 20 14:00:00 2010 msAATTsuse.de - fixed suse-11.3/suse-min-gnome. Gnome is not working no session and desktop information was installed
Fri Aug 20 14:00:00 2010 msAATTsuse.de - don\'t use mkclicfs from image root tree. That will fail in any case where the image buildsystem libraries doesn\'t match the ones required by the mkclicfs binary inside the root tree
Fri Aug 20 14:00:00 2010 msAATTsuse.de - fixed suse-11.3/suse-min-gnome example. Some X11 packages where missing in order to boot up with a working X
Wed Aug 18 14:00:00 2010 msAATTsuse.de - fixed convert39to41.xsl schema conversion. The attributes for the conversion from to were missing
Wed Aug 18 14:00:00 2010 msAATTsuse.de - fixed shell exception handling after the move mount of devices. In that cases the tty devices are in /mnt/dev and therefore any shell exception failed because the setctsid call can\'t find the device. This is now fixed (bnc #608620)
Wed Aug 18 14:00:00 2010 msAATTsuse.de - fixed netboot building by providing atftp for SLE11 (bnc #632203)
Tue Aug 17 14:00:00 2010 msAATTsuse.de - update schema documentation
Tue Aug 17 14:00:00 2010 msAATTsuse.de - added support for selecting the default boot entry for a kiwi install image. The optional attribute called installboot can take the values \'install\' for standard installation, \'failsafe-install\' for installation with failsafe kernel parameters and \'harddisk\' which is the default anyway if no installboot attribute was given (bnc #624228)
Tue Aug 17 14:00:00 2010 msAATTsuse.de - update documentation. XML elements and attributes are now listed in the index
Tue Aug 17 14:00:00 2010 msAATTsuse.de - update documentation. Better index page
Tue Aug 17 14:00:00 2010 msAATTsuse.de - update documentation
Mon Aug 16 14:00:00 2010 msAATTsuse.de - removed unused variable $device in mountSystem()
Mon Aug 16 14:00:00 2010 msAATTsuse.de - put the code which deactivates the filesystem check by resetting the mount counter into a function called resetMountCounter(). Let resetMountCounter also check the filesystem type to be able to distinguish different filesystem tools (bnc #627021)
Fri Aug 13 14:00:00 2010 msAATTsuse.de - update documentation, fixed Makefile and changed box frame layout into two horizintal lines
Fri Aug 13 14:00:00 2010 msAATTsuse.de - update documentation. Some style changes for code boxes which now allows also cut&paste
Fri Aug 13 14:00:00 2010 msAATTsuse.de - disable filesystem check for kiwi managed partitions using tune2fs -c -1 -i 0 $device (bnc #627021)
Wed Aug 11 14:00:00 2010 msAATTsuse.de - v4.56 released
Wed Aug 11 14:00:00 2010 msAATTsuse.de - fixed permissions and ownership setup of read-write part in split images. The problem here was that the read-write part is created as new directory structure belonging to root. Therefore it\'s required to update permissions and ownership from the original tree afterwards in the same as it\'s done for the read-only and temporary parts
Tue Aug 10 14:00:00 2010 msAATTsuse.de - make use of the --recursive feature of insserv and remove my own recursice insserv implementation which has to parse the insserv output and therefore always fail if that output changes (bnc #627480)
Tue Aug 10 14:00:00 2010 msAATTsuse.de - added acpi modules to kiwi\'s oemboot initrd. This is required mostly for fan control on laptops and therefore very important for the preload images running on laptops to prevent overheating of the devices
Tue Aug 10 14:00:00 2010 msAATTsuse.de - fixed hybrid persistent feature. The check for the bios protection was broken which caused the creation of the persistent write partition to be skipped. - added support for the kernel option wipecow=1. This option allows to wipe an eventually existing cow file on a hybrid iso image to start from scratch
Tue Aug 10 14:00:00 2010 msAATTsuse.de - changed suse-11.3/suse-live-stick example to use the hybrid iso technology
Tue Aug 10 14:00:00 2010 msAATTsuse.de - fixed coding style for driverupdate support in inst-sys mode also fixed DB comments in schema for driverupdate section
Tue Aug 10 14:00:00 2010 msAATTsuse.de - update documentation and man pages. some formal and consistency changes over the entire document
Mon Aug 9 14:00:00 2010 msAATTsuse.de - update documentation. Thanks to Thomas Schraitle
Mon Aug 9 14:00:00 2010 msAATTsuse.de - pxe: make sure the CONF contents are evaluated even if the image is downloaded to RAM only instead of a persistent device.
Mon Aug 9 14:00:00 2010 msAATTsuse.de - added missing xml object reference to foreign repo hash when building a split image
Mon Aug 9 14:00:00 2010 msAATTsuse.de - setup overlay mount method in create mode if the file $Create/kiwi-root.cache exists
Mon Aug 9 14:00:00 2010 msAATTsuse.de - update documentation. Thanks to Thomas for providing the patch
Fri Aug 6 14:00:00 2010 msAATTsuse.de - v4.55 released
Fri Aug 6 14:00:00 2010 msAATTsuse.de - fixed typo in config.xml search in overlay mount function
Fri Aug 6 14:00:00 2010 msAATTsuse.de - turn main::Prepare into an abspath
Fri Aug 6 14:00:00 2010 msAATTsuse.de - make sure the cache holds the correct copy of the base image and not the cache image XML
Fri Aug 6 14:00:00 2010 msAATTsuse.de - added arch information into caches
Fri Aug 6 14:00:00 2010 msAATTsuse.de - update documentation, patch by Thomas Schraitle
Fri Aug 6 14:00:00 2010 msAATTsuse.de - moved cache creation into functions initializeCache() selectCache() and createCache() - added meta information into root tree if cow cache is used. It\'s required to have the name of the cache clicfs available when running kiwi create on a root tree created with a clicfs based cache
Thu Aug 5 14:00:00 2010 msAATTsuse.de - improve caching by creating clicfs files from the single caches and mount them with a cow file for further operations.... still experimental
Thu Aug 5 14:00:00 2010 msAATTsuse.de - fixed xen/ec2 examples to clone services into runlevel 4 which is required by EC2
Thu Aug 5 14:00:00 2010 msAATTsuse.de - changed ec2 account number back to default
Thu Aug 5 14:00:00 2010 msAATTsuse.de - fixed boot image checksum creation in Makefile
Thu Aug 5 14:00:00 2010 msAATTsuse.de - EC2: changed the way how ec2 images are created. We now bundle the ami from a raw disk Xen image using the ec2 kernel. Along with this change the xenboot boot image became obsolete and was removed in a previous commit. Support for Xen is now only availabe via disk image and Xen must support PVgrub in order to boot it
Thu Aug 5 14:00:00 2010 msAATTsuse.de - EC2: update documentation about EC2 and Xen support
Thu Aug 5 14:00:00 2010 msAATTsuse.de - EC2: removed support for xenboot boot images, xen/ec2 is disk based now
Thu Aug 5 14:00:00 2010 msAATTsuse.de - EC2: removed suse-ec2-guest examples - EC2: added ec2Flavour into suse-xen-guest examples - EC2: changed suse-xen-guest examples image type to vmx with xen/ec2 kernel
Wed Aug 4 14:00:00 2010 msAATTsuse.de - fixed changelog creation tool. Don\'t include information about branch merges or commits which just copied a changelog entry for a previos commit into the kiwi.changes file. We also don\'t include the svn to git conversion information as I think it\'s not required
Wed Aug 4 14:00:00 2010 msAATTsuse.de - added xen guest example for 11.3
Wed Aug 4 14:00:00 2010 ugAATTsuse.de - fixed respect write protection for Live medium (SD-card) bnc#623038
Wed Aug 4 14:00:00 2010 msAATTsuse.de - fixed MBR rewrite call in installBootLoader()
Wed Aug 4 14:00:00 2010 msAATTsuse.de - fixed check for foreign packages. The problem here was that the correct packages sections were checked for matching the profiles of the boot image but they should be checked against the profiles of the system image.
Wed Aug 4 14:00:00 2010 msAATTsuse.de - don\'t check the return value of the e2fsck call. If the filesystem check was forced for example by a wrong system clock the check runs successfully but the return value is not zero.
Wed Aug 4 14:00:00 2010 msAATTsuse.de - fixed license display problem when no localized license files exist but a license.txt file does
Wed Aug 4 14:00:00 2010 msAATTsuse.de - add the vm guest example to openSUSE 11.3
Tue Aug 3 14:00:00 2010 msAATTsuse.de - create the kiwi.changes file from the git log information
Tue Aug 3 14:00:00 2010 msAATTsuse.de - add the live stick example to openSUSE 11.3
Tue Aug 3 14:00:00 2010 msAATTsuse.de - write back masterBootID (MBR ID) to the master boot record after it has been changed by installBootLoader()
Tue Aug 3 14:00:00 2010 msAATTsuse.de - added suse-euca-cloud examples for 11.3
Tue Aug 3 14:00:00 2010 msAATTsuse.de - reverted last change: don\'t call root filesystem check for images (bnc #627021) this causes the fs to remount read-only on newer versions if suse; what a crappy reaction
Tue Aug 3 14:00:00 2010 msAATTsuse.de - fixed repartition code for fdisk (SLE10) (bnc #627807)
Tue Aug 3 14:00:00 2010 msAATTsuse.de - don\'t call root filesystem check for images (bnc #627021)
Tue Aug 3 14:00:00 2010 msAATTsuse.de - if a fixed xml size was set for a filesystem image we use if even if kiwi\'s calculation says it\'s too small. This allows users to create the image with less or no free space but also could cause the image to fail because of no space left on device. We don\'t use the fixed xml size if it\'s too small for a virtual disk based image though because this could cause the image to be created successfully but then failed on boot which is a bad user experience (bnc #627031)
Tue Aug 3 14:00:00 2010 msAATTsuse.de - v4.54 released
Tue Aug 3 14:00:00 2010 msAATTsuse.de - fixed evaluation of PARTED_... variables (bnc #627593)
Mon Aug 2 14:00:00 2010 msAATTsuse.de - added entire usb stack to initrd for SLE11 oemboot (bnc #627439)
Mon Aug 2 14:00:00 2010 msAATTsuse.de - v4.53 released
Mon Aug 2 14:00:00 2010 msAATTsuse.de - again fixed the check for specific parted versions. I now changed it to directly check for the available options in parted instead of the parted version number
Mon Aug 2 14:00:00 2010 msAATTsuse.de - when creating a new cpio image make sure an eventually existing old version of .splash.gz will be removed
Fri Jul 30 14:00:00 2010 msAATTsuse.de - put patterns into image package section instead of bootstrap I discovered strange errors with older zypper versions when building newer images
Fri Jul 30 14:00:00 2010 msAATTsuse.de - v4.52 released
Fri Jul 30 14:00:00 2010 msAATTsuse.de - added log information about used boot-theme
Fri Jul 30 14:00:00 2010 msAATTsuse.de - clarify user creation and group association documentation - some alpha ordering inside the schema
Thu Jul 29 14:00:00 2010 msAATTsuse.de - support add-pattern option in upgrade mode too
Thu Jul 29 14:00:00 2010 msAATTsuse.de - add changelog entry for last commit - recreate documentation
Thu Jul 29 14:00:00 2010 msAATTsuse.de - again fixed parted version setup
Wed Jul 28 14:00:00 2010 msAATTsuse.de - again fixed PARTED_VER setup. older version strings looks different than the new ones. We had to standardize those too
Tue Jul 27 14:00:00 2010 msAATTsuse.de - fixed PARTED_VER setup and tests. If the parted version is below or equal 1.8.8 we switch to fdisk. This applies for sle10 where parted doesn\'t have some options which we require
Tue Jul 27 14:00:00 2010 msAATTsuse.de - added support for image caching. With this feature you can provide a cache directory along with the option --cache. kiwi in prepare step looks into the directory if it finds a cache serving as the base-root for the system image. If it can\'t find one it creates caches based on the patterns used in the image description which speeds up subsequent prepare calls for this and other images
Tue Jul 27 14:00:00 2010 msAATTsuse.de - fixed solvable cache if only one solvable is created it was removed and not cached
Tue Jul 27 14:00:00 2010 msAATTsuse.de - fixed use of uninitialized value for $dir
Tue Jul 27 14:00:00 2010 msAATTsuse.de - fixed suse-11.3/suse-min-gnome example, added missing icewm and a terminal :)
Tue Jul 27 14:00:00 2010 msAATTsuse.de - don\'t create splash initrd if it already exists
Tue Jul 27 14:00:00 2010 msAATTsuse.de - fixed use of uninitialized value for $overlay
Mon Jul 26 14:00:00 2010 msAATTsuse.de - fixed SLE10 boot images using gettext-runtime. This package doesn\'t exist there, it was gettext only (bnc #625392)
Mon Jul 26 14:00:00 2010 msAATTsuse.de - accidently removed an important return statement in setupBootPartition
Mon Jul 26 14:00:00 2010 msAATTsuse.de - v4.51 released
Mon Jul 26 14:00:00 2010 msAATTsuse.de - fixed setupBootPartition() to return with a bootid export in _any_ case. Default bootid is 1 (bnc #625379)
Fri Jul 23 14:00:00 2010 msAATTsuse.de - v4.50 released
Fri Jul 23 14:00:00 2010 msAATTsuse.de - fixed URL quoting, we have to distinguish the quoting for local path URL\'s and network protocol URL\'s
Thu Jul 22 14:00:00 2010 msAATTsuse.de - fixed xenconfig creation for vmx if no format was set
Thu Jul 22 14:00:00 2010 msAATTsuse.de - fixed use of uninitialized value and test -z usage in bash code
Thu Jul 22 14:00:00 2010 msAATTsuse.de - fixed locale validation and documentation as well as some template examples provided by kiwi. The locale value in kiwi is always a UTF-8 locale therefore it\'s not allowed to add the encoding type to the locale string. We also support the xx_XX locale style only which is now all checked by the schema (bnc #620789)
Thu Jul 22 14:00:00 2010 msAATTsuse.de - fixed documentation about the evaluation of the locale information
Thu Jul 22 14:00:00 2010 msAATTsuse.de - fixed locale setup for some examples
Tue Jul 20 14:00:00 2010 msAATTsuse.de - fixed oem recovery for LVM based images. It\'s required to backup the LVM metadata in order to restore it
Tue Jul 20 14:00:00 2010 msAATTsuse.de - added main::isize function to replace the use of the -s operator. This is done because of SUSE Studio which maps a file to a block special under certain circumstances which causes -s to not work anymore
Mon Jul 19 14:00:00 2010 msAATTsuse.de - v4.49 released
Sat Jul 17 14:00:00 2010 rootAATTsuse.de - install bootloader for vmx and usb after initial deployment to make sure reboot works
Fri Jul 16 14:00:00 2010 rootAATTsuse.de - added suport for the btrfs filesystem (bnc #596205)
Fri Jul 16 14:00:00 2010 msAATTsuse.de - v4.48 released
Fri Jul 16 14:00:00 2010 msAATTsuse.de - fixed recovery cleanup code - fixed umountSystem call to check proc/mounts and umount a list of possible system mount paths in the right order - netboot: fixed creation of read-write partition - netboot: fixed boot partition setup, IFS restore required - netboot: imageDiskDevice was not set but used
Thu Jul 15 14:00:00 2010 msAATTsuse.de - v4.47 released
Thu Jul 15 14:00:00 2010 msAATTsuse.de - fixed parted sector init if the disk has no partitions we need to set startSectors to 1
Wed Jul 14 14:00:00 2010 msAATTsuse.de - v4.46 released
* xenServer checks via kernel systemMap and kiwi_xendomain if a xen server bootloader setup is required
* kernelList is fixed to store the running kernel as first entry in the kernel list
Wed Jul 14 14:00:00 2010 msAATTsuse.de - do not fail when image files are symlinks to a device
Wed Jul 14 14:00:00 2010 msAATTsuse.de - fixed race condition resulting at times in message of not finding the MBR and other times not finding the CD drive.
Tue Jul 13 14:00:00 2010 msAATTsuse.de - put the information about the xen domain setup into the initrd as variable kiwi_xendomain
Tue Jul 13 14:00:00 2010 msAATTsuse.de - remove unneeded initrd.vmx and linux.vmx files _before_ calling mkinitrd. This saves space to not run into a space problem on the boot partition (bnc #621859)
Tue Jul 13 14:00:00 2010 msAATTsuse.de - usb attribute in vmwareconfig doesn\'t exist anymore with the new machine section. usb is always present for vmware fixed xslt stylesheet for this case
Fri Jul 9 14:00:00 2010 msAATTsuse.de - v4.45 released
Fri Jul 9 14:00:00 2010 msAATTsuse.de - recovery tarball: tar is intelligent enough to find hard link references. This causes the archive to be smaller. But when kiwi installs the root tree into the image all hard link references will solve into a new inode. According to this the recreation of the tarball in combination with an inplace setup will always be bigger than the reference tarball from the root tree and this causes the recovery partition and/or the free space inside the root partition to be too small. I fixed this with the following tar option: --hard-dereference
Tue Jul 6 14:00:00 2010 msAATTsuse.de - added support for the creation of the zipl.conf file the installation of zipl into the MBR from a loop file is still an open issue. We need to talk to IBM here first - restructure source tree a bit. make templates and repos architecture dependent because of the s390 implementations
Tue Jul 6 14:00:00 2010 msAATTsuse.de - make sure virtio_blk is loaded
Tue Jul 6 14:00:00 2010 msAATTsuse.de - match MBR id for little and big endian machines
Tue Jul 6 14:00:00 2010 msAATTsuse.de - don\'t exit with an error if \'zypper rm\' can\'t find the package - check for profiles when searching for foreign packages also search in type=image and type=bootstrap package sections
Mon Jul 5 14:00:00 2010 rootAATTsuse.de - removed SLE10 target for s390, we are starting with SLE11 SP1 - added support for s390 kernel extraction from initrd (image file) - fixed vmxboot/oemboot boot image descriptions for s390 - added kiwi-tools for s390/s390x
Mon Jul 5 14:00:00 2010 adrianAATTsuse.de - fix syntax error from my last commit :/
Fri Jul 2 14:00:00 2010 msAATTsuse.de - v4.44 released
Fri Jul 2 14:00:00 2010 msAATTsuse.de - fixed use of uninitialized iso object reference
Thu Jul 1 14:00:00 2010 msAATTsuse.de - fixed repartition problem with new and old parted. The code has been changed in a way that it uses a sector based start value and a cylinder based end value
Thu Jul 1 14:00:00 2010 msAATTsuse.de - call conversion module automatically but only if a format was set in config.xml. Exception: the xen image type, which requires a machine configuration but without a format conversion
Thu Jul 1 14:00:00 2010 adrianAATTsuse.de Make volume id labels nicer on coolos request:
* Always strip -Media
* Do not add dots when stripping
* Do add media number .XXX suffix only when multiple medias exist
Thu Jul 1 14:00:00 2010 msAATTsuse.de - use format from xml if specified and not set on the commandline for the conversion into another image format
Wed Jun 30 14:00:00 2010 msAATTsuse.de - fixed minor ovf creation bugs. Note old versions of ovftool will not work with this version of kiwi because VMware changed the option set of their own tool completely
Wed Jun 30 14:00:00 2010 msAATTsuse.de - update image descriptions via xslt
Wed Jun 30 14:00:00 2010 msAATTsuse.de - added xslt stylesheet to convert from schema v4.6 to v4.7 the conversion moves the vmwareconfig and xenconfig sections into the common machine sections and also changes format=\"iso\" into installiso=\"true\" and format=\"usb\" into installstick=\"true\"
Wed Jun 30 14:00:00 2010 msAATTsuse.de - update documentation according to the new KIWIImageFormat module and the changes in the type and VM configuration XML setup
Tue Jun 29 14:00:00 2010 msAATTsuse.de - Cleanup formats in kiwi:
* create new KIWIImageFormat.pm module for the conversion into different image formats like vmdk,ovf and friends. Also added function for creating the machine configuration into this new module
* create common XML specification for vmware|xen config starting with
* added new option --convert to kiwi.
* recursively call kiwi with $main::Convert set to convert into the specified format and/or configuration
* added bool attributes installcd and installstick replacing the old format=\"iso\" and format=\"usb\" setup
Mon Jun 28 14:00:00 2010 msAATTsuse.de - moved the XML validation ahead of the first data extraction - changed the way validation errors are reported. If the xml file was converted via XSL the error will be reported against the converted file. This makes the error reporting more meaningful as otherwise validation errors are reported that are due to the use of an older schema version. - fixed typo in convert45to46.xsl. Do not swallow attributes on packages of the vmware section - Thanks to Robert who did the last three ones, great work :)
Fri Jun 25 14:00:00 2010 msAATTsuse.de - v4.43 released
Fri Jun 25 14:00:00 2010 msAATTsuse.de - fixed copy of root tree into final image. We used cp -a $source/ * $dest which did not match the dot files in $source/. * Therefore I changed this to use a tar based copy
Thu Jun 24 14:00:00 2010 msAATTsuse.de - added oem-inplace-recovery option which allows creation of the recovery tarball at first deployment instead of creating the tarball and store it inside the image
Wed Jun 23 14:00:00 2010 msAATTsuse.de - add bugid to changelog entry
Wed Jun 23 14:00:00 2010 msAATTsuse.de - update the min gnome example to 11.3
Wed Jun 23 14:00:00 2010 msAATTsuse.de - use cylinder based alignment with new parted version 2.2.x. This fixes the oem repartition code for systems which uses parted >= 2.2.x build on a parted 1.9.x build system. Also removed unused functions: partedGetSectors and partedStartCylinder
Wed Jun 23 14:00:00 2010 msAATTsuse.de - fixed attribute validation, space and / is not allowed for this attribute
Wed Jun 23 14:00:00 2010 msAATTsuse.de - started support for s390 imaging:
* zipl support in kiwi. This is still work in progress only the skeleton at the required code points has been added.
* adapted the JeOS sle11 template to provided a profile for x86 and s390 packages
* also added vmxboot and oemboot bootimages to be build The code there will work as initrd for an s390 guest within kvm
Tue Jun 22 14:00:00 2010 msAATTsuse.de - added alpha-ordering patch from Robert
Tue Jun 22 14:00:00 2010 msAATTsuse.de - added SLE11 target for migration
Tue Jun 22 14:00:00 2010 msAATTsuse.de - strict and warning should be loaded first
Fri Jun 18 14:00:00 2010 msAATTsuse.de - exit kiwi directly if the possible question to create the destination directory was canceled by the user
Fri Jun 18 14:00:00 2010 msAATTsuse.de - v4.42 released
Fri Jun 18 14:00:00 2010 msAATTsuse.de - avoid a Perl runtime error message from being printed if the XML file parsing fails. - changed findExec to return undef if the executable cannot be found. If as previously the execName is returned the caller has no way to differentiate whether or not the desired executable actually exists on the system.
Thu Jun 17 14:00:00 2010 msAATTsuse.de - migration:
* fixed distro detection
* added support for harware dependent package information
Thu Jun 17 14:00:00 2010 msAATTsuse.de - redesigned and restructure the kiwi migration module we were working in a small workgroup this week to establish a new version of the migration module. Thanks to everybody in my team.
Thu Jun 17 14:00:00 2010 msAATTsuse.de - added distro tags to orphant package list
Thu Jun 17 14:00:00 2010 msAATTsuse.de - allow plaindir repo for solvable creation
Thu Jun 17 14:00:00 2010 msAATTsuse.de - migration:
* fixed deny list, service links must stay
* apply deny links on overlay tree
Wed Jun 16 14:00:00 2010 msAATTsuse.de - fixed attr access
Wed Jun 16 14:00:00 2010 msAATTsuse.de - fixed file/directory search for migration
Wed Jun 16 14:00:00 2010 msAATTsuse.de - fixed Makefile - don\'t follow symlinks to directories in migration
Tue Jun 15 14:00:00 2010 msAATTsuse.de - fixed spec file to provide /var/cache/kiwi - fixed migration to be faster in searching non packaged files / directories
Tue Jun 15 14:00:00 2010 msAATTsuse.de - migration: - fixed filesystem scan - copy /etc entirely to root/ - don\'t setup services - use product file to add system repository
Mon Jun 14 14:00:00 2010 cwhAATTsuse.de DriverUpdateDisk support
Mon Jun 14 14:00:00 2010 msAATTsuse.de - Remove some code duplication by using a new getDefaultBaseRoot() function
Mon Jun 14 14:00:00 2010 msAATTsuse.de - Remove some code duplication by using a new createDirInteractive() function
Fri Jun 11 14:00:00 2010 msAATTsuse.de - v4.41 released
Thu Jun 10 14:00:00 2010 msAATTsuse.de - added oem-unattended element which allows unattended installation if possible
Thu Jun 10 14:00:00 2010 msAATTsuse.de - use dialog program to show dump reboot message
Thu Jun 10 14:00:00 2010 msAATTsuse.de - added oem-dumphalt element which reboots the system after the image was dumped (installed) on the target device. A message appears and the system waits for a key event before reboot
Wed Jun 9 14:00:00 2010 msAATTsuse.de - reduce the scope of the eval around the config.xml file parsing. The only operation that may fail with an exception is the parsing, while accessing the resulting document does not generate exceptions, thus the eval (exception handling) should only enclose the code that actually may trigger an exception - improve the XML validation error reporting if jing is installed on the system
Wed Jun 9 14:00:00 2010 msAATTsuse.de - also search for pattern file name in repomd.xml
Wed Jun 9 14:00:00 2010 msAATTsuse.de - fixed repo-patterns info module
Wed Jun 9 14:00:00 2010 msAATTsuse.de - add selinux hint for RHEL example template
Wed Jun 9 14:00:00 2010 msAATTsuse.de - fixed README for rhel image creation
Tue Jun 8 14:00:00 2010 msAATTsuse.de - v4.40 released
Tue Jun 8 14:00:00 2010 msAATTsuse.de - fixed luks + lvm boot if no re-partition code is called
Tue Jun 8 14:00:00 2010 msAATTsuse.de - update documentation, added kiwirc manual page. Fixed manual page creation to contain correct version info
Tue Jun 8 14:00:00 2010 msAATTsuse.de - check that the specified log server port is numeric in nature
Mon Jun 7 14:00:00 2010 msAATTsuse.de - setup xencons only for domU setup (bnc #561635)
Fri Jun 4 14:00:00 2010 msAATTsuse.de - v4.39 released
Fri Jun 4 14:00:00 2010 msAATTsuse.de - removed dbsulock from kiwi, hal is deprecated
Wed Jun 2 14:00:00 2010 msAATTsuse.de - fixed CDMountOption() to use blkid type check (bnc #610649)
Wed Jun 2 14:00:00 2010 msAATTsuse.de - use vmxboot linuxrc for usbboot too, make sure --bootstick deployment does a cleanup of the write partition if used
Wed Jun 2 14:00:00 2010 msAATTsuse.de - changed ovtool call, they don\'t understand -oq but -o -q
Tue Jun 1 14:00:00 2010 msAATTsuse.de - use \"kernel chain\" syntax for syslinux chain loader
Mon May 31 14:00:00 2010 msAATTsuse.de - don\'t touch modules in updates and weak-updates (bnc #609879)
Mon May 31 14:00:00 2010 msAATTsuse.de - v4.38 released
Sun May 30 14:00:00 2010 msAATTsuse.de - added findExec() function to check for tools - fixed unneeded kpartx call in installBootLoader
Fri May 28 14:00:00 2010 msAATTsuse.de - check if the rootEFD is defined before attempting to write to the file handle
Fri May 28 14:00:00 2010 msAATTsuse.de - fixed usb stick creation for sys|extlinux
Thu May 27 14:00:00 2010 msAATTsuse.de - make fbiterm work in vmx images too - fixed setup of initrd/kernel links, because of the change from a link to a bind mount we can now make that code simpler
Thu May 27 14:00:00 2010 msAATTsuse.de - make sure boot image has enough space
Thu May 27 14:00:00 2010 msAATTsuse.de - fixed boot configuration if overlay filesystem is used
Thu May 27 14:00:00 2010 msAATTsuse.de - added support for extlinux based recovery (bnc #606651) - make recovery work with separate boot partition - use bind mount instead of link to boot partition
Thu May 27 14:00:00 2010 mbarringerAATTsuse.de Very minor cleanups to the imagewriter
Tue May 25 14:00:00 2010 msAATTsuse.de - fixed install cd boot parameters if ext|syslinux is used - fixed ext|syslinux setup in initrd code (KIWILinuxRC.sh)
Tue May 25 14:00:00 2010 msAATTsuse.de - changed ovftool options according to latest version
Tue May 25 14:00:00 2010 msAATTsuse.de - use isolinux for install CD\'s if sys|extlinux was requested as bootloader for an oem image plus install media (bnc #606651) - fixed clicfs resize operation. The command is now based on a 512 byte sector size value instead of a 4k filesystem block size value which might be wrong depending on the size of the filesystem (bnc #604646)
Fri May 21 14:00:00 2010 msAATTsuse.de - v4.37 released
Fri May 21 14:00:00 2010 ugAATTsuse.de - fixes endless building problem if function suseInsertService() is calling in config.sh and system/chroot contains a broken /etc/init.d/ script. (bnc #605981)
Fri May 21 14:00:00 2010 msAATTsuse.de - oem: fixed creation of clicfs over LVM images - oem: fixed home device setup for LVM - oem: fixed fstab setup for LVHome
Fri May 21 14:00:00 2010 msAATTsuse.de - update documentation and schema documentation due to last change (dmsquash support removed)
Fri May 21 14:00:00 2010 msAATTsuse.de - fixed setLVMDeviceMap() function. The contents of $result{dmapper} were wrong if the device was a loop destination
Fri May 21 14:00:00 2010 msAATTsuse.de - removed support for dmsquash filesystem. This implementation was replaced by clicfs. dmsquash was a combination of a squashfs filesystem together with a device mapper snapshot as copy-on-write part. There was no way to properly react if we run out of cow space which also makes this feature more or less useles in a production environment
Fri May 21 14:00:00 2010 msAATTsuse.de - fixed size check for repart operation - make sure home has a min size of 500 MB if home partition was requested
Thu May 20 14:00:00 2010 msAATTsuse.de - removed plusSuggested attribute, update documentation and added sort patch by Robert
Thu May 20 14:00:00 2010 msAATTsuse.de - rewrote the oem partition code for better maintenance and to support syslinux/extlinux bootloader (bnc #606651)
Wed May 19 14:00:00 2010 msAATTsuse.de - update documentation
Wed May 19 14:00:00 2010 msAATTsuse.de - fixed packages type value \"net\" which should be pxe - added documentation update from Robert
Tue May 18 14:00:00 2010 msAATTsuse.de - fixed typo in comment
Tue May 18 14:00:00 2010 msAATTsuse.de - use tar command to copy overlay files which is more error prune than the cp command (bnc #476117)
Tue May 18 14:00:00 2010 ugAATTsuse.de - fix for Bug 604705 - kiwi overwrites /etc/sysconfig/firstboot
Tue May 18 14:00:00 2010 msAATTsuse.de - fixed replace package handling and update JeOS templates accordingly. This allows to bind multiple package actions bound to one package
Tue May 18 14:00:00 2010 msAATTsuse.de - added support for type specific package sections . Along with this change a new Schema version 4.6 was introduced which automatically converts the type=\"vmware\" section into a type=\"vmx\" section
Mon May 17 14:00:00 2010 msAATTsuse.de - added support for extlinux bootloader for vmx and usbboot. support for extlinux and oemboot will follow later. The repartition code of the oem images causes a more complex implementation for sys|extlinux.
Mon May 17 14:00:00 2010 ugAATTsuse.de - check RPM version of autoyast
Fri May 14 14:00:00 2010 msAATTsuse.de - added support for displayname for vmx type (bnc #605939)
Fri May 14 14:00:00 2010 msAATTsuse.de - v4.36 released
Fri May 14 14:00:00 2010 msAATTsuse.de - fixed in place search field text
Fri May 14 14:00:00 2010 msAATTsuse.de - fixed some typo in migration js
Fri May 14 14:00:00 2010 msAATTsuse.de - activate javascript in migration report
Fri May 14 14:00:00 2010 msAATTsuse.de - added search field for unpackaged file list on the generated migration report page
Fri May 14 14:00:00 2010 msAATTsuse.de - update schema documentation, schema doc hint fix
Wed May 12 14:00:00 2010 msAATTsuse.de - better changelog entry for last fix
Wed May 12 14:00:00 2010 msAATTsuse.de - revert last change to Dialog function and fixed luksOpen function to use the runInteractive() method for dialogs with input fields
Wed May 12 14:00:00 2010 msAATTsuse.de - update translations from suse svn
Wed May 12 14:00:00 2010 msAATTsuse.de - fixed Dialog function work with input fields
Wed May 12 14:00:00 2010 msAATTsuse.de - fixed probeFileSystem function for luks detection. blkid returned crypto_LUKS which was missing in the case section
Wed May 12 14:00:00 2010 msAATTsuse.de - v4.35 released
Wed May 12 14:00:00 2010 msAATTsuse.de - disabled autoyastClone() temporarly, we need to find a way to call that only on >= 11.3 systems
Wed May 12 14:00:00 2010 msAATTsuse.de - fixed cleanup of xmlused/xmlorig files
Wed May 12 14:00:00 2010 msAATTsuse.de - added .info file for cached solvables - fixed solvable pattern creation. It\'s required to lookup susetags even if there is a repodata meta data information to be able to create a full featured solvable including all pattern names
Tue May 11 14:00:00 2010 msAATTsuse.de - migration changes:
* automatically copy the packaged but modified files into the overlay section and don\'t put them into the report
* create a HTML file list for the unpackaged files to browse through and update the text.
Tue May 11 14:00:00 2010 msAATTsuse.de - deactivate splash screen for initial deployment in kiwi OEM boot images (bnc #600710)
Tue May 11 14:00:00 2010 msAATTsuse.de - start sshd for SLE10 JeOS
Tue May 11 14:00:00 2010 msAATTsuse.de - fixed rpmLibs() function, need ldconfig after cleanup
Tue May 11 14:00:00 2010 msAATTsuse.de - some code cleanup in KIWIImage.pm, unused variables - call mkclicfs from the installed root tree instead of the build system to prevent version conflicts. If no clicfs is installed by the image description a warning message is displayed and the build system mkclicfs is used as before (bnc #604646)
Mon May 10 14:00:00 2010 msAATTsuse.de - fixed min inode count when creating the virtual disk from a root directory instead of a root image file
Mon May 10 14:00:00 2010 msAATTsuse.de - set fixed journal size to 12 MB, fixed size calculation in KIWIBoot.pm which did not take the journal size into account (bnc #587361)
Fri May 7 14:00:00 2010 msAATTsuse.de - umountSystemFilesystems at the end of isoboot pre-init
Fri May 7 14:00:00 2010 msAATTsuse.de - v4.34 released
Fri May 7 14:00:00 2010 msAATTsuse.de - fixed old live iso type (no flags set) to work again. The problem was that we prevent --follow-symlinks in this mode but then we also have to copy the fixed read-write part as file to the iso structure instead of linking it. This fix is related to (bnc #599712)
Fri May 7 14:00:00 2010 msAATTsuse.de - typo in changelog
Fri May 7 14:00:00 2010 msAATTsuse.de - removed check for utimer program, it\'s not a mandatory requirement for the system to be able to boot correctly - fixed mkinitrd call, check if the option -B exists and don\'t pass it if it doesn\'t first (bnc #603338)
Thu May 6 14:00:00 2010 msAATTsuse.de - beautify migration report and fixed html code
Wed May 5 14:00:00 2010 msAATTsuse.de - fixed warning message if URL can\'t be resolved - fixed space problem when setting up boot partition for images which requires a separate boot partition which is the case for filesystems like clicfs. This caused a wrong copy of the initrd and prevents the system from being able to reboot
Tue May 4 14:00:00 2010 msAATTsuse.de - package scripts change: use File::lchown qw( lutimes ); for changing the a|mtime of the symlinks inside the source tarball. This means all people who use \"make build\" from the kiwi source need to make sure they have the File::lchown module installed from CPAN
Tue May 4 14:00:00 2010 msAATTsuse.de - preserve timestamps of source tarballs if not change has happened. I\'m still searching for a way to preserve timestamps of symlinks (cp -a has a bug and does not preserve it)
Tue May 4 14:00:00 2010 msAATTsuse.de - fixed pxeSwapDevice to create the correct device node name using ddn function
Tue May 4 14:00:00 2010 msAATTsuse.de - v4.33 released
Tue May 4 14:00:00 2010 msAATTsuse.de - support partition type 8e (V) in pxePartitionInput()
Mon May 3 14:00:00 2010 msAATTsuse.de - fixed build
Mon May 3 14:00:00 2010 msAATTsuse.de - split up kiwi source into: source, repository and documentation tarballs to be more OBS friendly (bnc #601908)
Mon May 3 14:00:00 2010 msAATTsuse.de - removed netboot specific partition code and replace it by the common partition functions used for oem and other tasks, related to (bnc #601890)
Mon May 3 14:00:00 2010 msAATTsuse.de - added support for Xen dom0 over netboot (bnc #601890)
Fri Apr 30 14:00:00 2010 adrianAATTsuse.de Add cciss driver: make blade center with HP smart array controller supported
Thu Apr 29 14:00:00 2010 msAATTsuse.de - moved the PARTITIONER change for hybrid into the CDMount function
Thu Apr 29 14:00:00 2010 msAATTsuse.de - fixed createHybridPersistent: wait for new storage device before creating a filesystem. Also make sure imageDiskDevice is set before calling callPartitioner()
Thu Apr 29 14:00:00 2010 msAATTsuse.de - added parted to isoboot images this is required for the hybrid persistent feature. also increased min space for clicfs embedded ext3 filesystem. Also fixed the createHybridPersistent() function to use fdisk instead of parted. The problem here is that parted doesn\'t accept the partitiont able written by the isohybrid tool.
Thu Apr 29 14:00:00 2010 msAATTsuse.de - v4.32 released
Wed Apr 28 14:00:00 2010 msAATTsuse.de - fixed repartition code for overlay systems (clicfs)
Wed Apr 28 14:00:00 2010 msAATTsuse.de - fixed repartition code for overlay systems (clicfs)
Tue Apr 27 14:00:00 2010 msAATTsuse.de - fixed satplugin hash creation - sort package list in migration mode
Tue Apr 27 14:00:00 2010 msAATTsuse.de - support new createrepo repomd.xml metadata information. kiwi now reads the repomd.xml if it exists and parses the primary data section in order to get all metadata file names
Tue Apr 27 14:00:00 2010 msAATTsuse.de - don\'t create install.inf and runme_at_boot in migration code we are creating the config-yast-autoyast.xml file and during kiwi prepare all required files to start autoyast are created by KIWIConfigure.pm
Mon Apr 26 14:00:00 2010 msAATTsuse.de - automatically skip the gpg-pubkey packages during migration
Mon Apr 26 14:00:00 2010 msAATTsuse.de - removed kiwi\'s own pattern solving module. The satsolver approach is the preferred solution to implement this
Fri Apr 23 14:00:00 2010 msAATTsuse.de - added alarm timer for HTTP requests. If a URL can\'t be resolved due to problems on the remote side the request will be canceled after 5 seconds
Fri Apr 23 14:00:00 2010 msAATTsuse.de - v4.31 released
Wed Apr 21 14:00:00 2010 msAATTsuse.de - added support for OEM partition based install (bnc #597679)
Tue Apr 20 14:00:00 2010 wfeldtAATTsuse.de use gfxboot.c32 if gfxboot.com does not exist Signed-off-by: Steffen Winterfeldt
Tue Apr 20 14:00:00 2010 msAATTsuse.de - fixed function dn(), added function nd() dn -> disk device name from device node nd -> device node number from device node
Mon Apr 19 14:00:00 2010 msAATTsuse.de - removed SAP related code from boot images. This was only for a proof of concept and never lead to anything useful
Sun Apr 18 14:00:00 2010 adrianAATTsuse.de fix product building for current factory
Fri Apr 16 14:00:00 2010 msAATTsuse.de - v4.30 released
Wed Apr 14 14:00:00 2010 msAATTsuse.de - reverted last change in default split section
Wed Apr 14 14:00:00 2010 msAATTsuse.de - fixed split boot, cleanImage is not allowed to umount the required but non busy symlinked read-write part
Wed Apr 14 14:00:00 2010 msAATTsuse.de - cleaned up unused variables in KIWIImage.pm
Wed Apr 14 14:00:00 2010 msAATTsuse.de - enhanced KIWILinuxRC create/resize filesystem functions to be able to return only the command without actually invoking it
Mon Apr 12 14:00:00 2010 msAATTsuse.de - version v4.29
Mon Apr 12 14:00:00 2010 msAATTsuse.de - speedup prepare step by not removing the repository when the chroot switch happens
Mon Apr 12 14:00:00 2010 msAATTsuse.de - restart utimer in pre-init stage, also put the time information into /dev which is a bind mounted location
Mon Apr 12 14:00:00 2010 msAATTsuse.de - Don\'t update bootloader when calling mkinitrd. The bootloader setup in the first place was done by kiwi (bnc #595073)
Thu Apr 8 14:00:00 2010 msAATTsuse.de - make ppc netboot suse-linuxrc the same as for ix86
Thu Apr 8 14:00:00 2010 msAATTsuse.de - removed SAP related code. This was only for a proof of concept and never lead to anything useful
Thu Apr 8 14:00:00 2010 msAATTsuse.de - added common functions resizeFilesystem() and createFilesystem() in KIWILinuxRC.sh
Thu Apr 8 14:00:00 2010 msAATTsuse.de - added suse-11.3 boot and image templates. Also removed suse-11.0 boot and image templates - cleaned up spec file, removed prebuild code and package which is not used by anybody
Wed Apr 7 14:00:00 2010 msAATTsuse.de - forgot to add probeFilesystem bevore restoring home filesystem because of this only the default action (ext3) applies
Wed Apr 7 14:00:00 2010 msAATTsuse.de - also use the root filesystem type for the optional home filesystem while in a OEM deployment process (bnc #594202) - make the recovery filesystem an ext2 filesystem - fixed createPartedInput() to always have a partition ID
Tue Apr 6 14:00:00 2010 msAATTsuse.de - ovftool will create junks of data according to the image size to allow better download performance. Because of this I changed the call to create new files in a separate directory
Tue Mar 30 14:00:00 2010 msAATTsuse.de - added iputils package to 11.2 JeOS
Mon Mar 29 14:00:00 2010 msAATTsuse.de - v4.27 - fixed --build option, glob check did not work (bnc #591889)
Fri Mar 26 13:00:00 2010 msAATTsuse.de - leave /mnt directory before calling umountSystem - fixed bc division by zero
Fri Mar 26 13:00:00 2010 msAATTsuse.de - leave libnss_dns inside the boot images for name resolution - don\'t print usage message for inst-source module, works suse internally only at the moment
Thu Mar 25 13:00:00 2010 msAATTsuse.de - fixed cloud examples, use rsyslog in 11.2 example
Thu Mar 25 13:00:00 2010 msAATTsuse.de - use bootnext \'boot from hard disk\' for ISO\'s too (bnc #583212)
Thu Mar 25 13:00:00 2010 msAATTsuse.de - added uncompressed tar size information for OEM recovery
Thu Mar 25 13:00:00 2010 msAATTsuse.de - update changelog - cleanup the yast clone config code a bit
Thu Mar 25 13:00:00 2010 ugAATTsuse.de
* autoyast cloning code added to migration
Thu Mar 25 13:00:00 2010 msAATTsuse.de - update XML catalog and format of suse-euca-cloud example
Tue Mar 23 13:00:00 2010 msAATTsuse.de - switched to parted as default partition tool
Tue Mar 23 13:00:00 2010 msAATTsuse.de - removed destdir check for migration
Tue Mar 23 13:00:00 2010 msAATTsuse.de - force base destination directory for image migration and update documenation about migration
Tue Mar 23 13:00:00 2010 msAATTsuse.de - added /mnt/var/cache/recovery/oem-trigger to be written after the kiwi recover/restore process in order to allow scripts to do something on boot of the recovered/restored system (bnc #586529)
Mon Mar 22 13:00:00 2010 msAATTsuse.de - v4.25 - added bootnext program which implements a small boot loader needed for the \'boot from hard disk\' menu entry on usb media. It basically loads the mbr from the first drive that is not the usb stick. Thanks to Steffen Winterfeldt who implemented this (bnc #583212)
Sun Mar 21 13:00:00 2010 mbarringerAATTsuse.de Fixing the imagewriter desktop file and spec file
Sun Mar 21 13:00:00 2010 mbarringerAATTsuse.de Add a helpful message when there are no USB keys present
Fri Mar 19 13:00:00 2010 msAATTsuse.de - added example to create cloud infrastructure images based on Eucalyptus
Fri Mar 19 13:00:00 2010 msAATTsuse.de - fixed error which is triggered if the overlay root directory of the image description exists but is empty.
Fri Mar 19 13:00:00 2010 msAATTsuse.de - added dialog based OEM install verification UI
Fri Mar 19 13:00:00 2010 msAATTsuse.de - added \"Select disk for installation\" to getText (bnc #589667)
Thu Mar 18 13:00:00 2010 msAATTsuse.de - only recommend squashfs don\'t require it
Thu Mar 18 13:00:00 2010 msAATTsuse.de - added setterm -powersave off -blank 0 for boot images
Thu Mar 18 13:00:00 2010 msAATTsuse.de - fixed udevKill in pre-init by udevSystemStop()
Thu Mar 18 13:00:00 2010 msAATTsuse.de - fixed pattern/product evaluation
Thu Mar 18 13:00:00 2010 msAATTsuse.de - set /tmp to be a write path in KIWISplit.txt
Thu Mar 18 13:00:00 2010 msAATTsuse.de - fixed build
Thu Mar 18 13:00:00 2010 msAATTsuse.de - added support for RHEL 5.4 in kiwi. This includes:
* custom rhel-repo with hwinfo, gfxboot and friends
* support for yum package manager backend
* JeOS template for RHEL 5.4
* isoboot boot image description for RHEL 5.4
* NOTE: only the iso type has been implemented so far
Wed Mar 17 13:00:00 2010 msAATTsuse.de - fixed long startup time because of ldconfig running when KIWILinuxRC is sourced from the shell - don\'t use killproc,killall inside the boot images. All procs are written to /iprocs and are handled when required
Tue Mar 16 13:00:00 2010 msAATTsuse.de - added Xen dom0 hypervisor check if domain=\"dom0\" is set - fixed Xen dom0 bootloader configuration
Tue Mar 16 13:00:00 2010 msAATTsuse.de - fixed --build option in kiwi
Mon Mar 15 13:00:00 2010 msAATTsuse.de - fixed getSize, +5M journal size - fixed install stick free space setup
Mon Mar 15 13:00:00 2010 msAATTsuse.de - leave libresolv inside the initrd to allow name resolution - fixed default pxeboot file, use kiwiserver
Mon Mar 15 13:00:00 2010 msAATTsuse.de - v4.23 - fixed getSize() function taking journal size into account - fixed getSize() function round values not truncate them
Fri Mar 12 13:00:00 2010 msAATTsuse.de - fixed typo in documentation
Thu Mar 11 13:00:00 2010 msAATTsuse.de - fixed quoting in baseUpdateSysConfig (bnc #587132) - turn destdir into absolute path directly after the option parser (bnc #584200)
Wed Mar 10 13:00:00 2010 msAATTsuse.de - remove empty dirs in rpmLibs (\"clean\") (bnc #536256)
Wed Mar 10 13:00:00 2010 msAATTsuse.de - allow LWP proxy setting from environment (bnc #586655)
Tue Mar 9 13:00:00 2010 adrianAATTsuse.de - support architectures for products, which are not specified in fallback lists (fixes glibc.i686 case) Conflicts: rpm/kiwi.changes
Tue Mar 9 13:00:00 2010 mbarringerAATTsuse.de Adding two new command flags: -l, which lists USB devices -k, which sets the imagewriter in \"kiosk mode\" (it won\'t list drives > 200GB)
Mon Mar 8 13:00:00 2010 msAATTsuse.de - v4.22 - fixed missing xen package in oemboot/suse-11.2 boot image description (bnc #561635)
Mon Mar 8 13:00:00 2010 adrianAATTsuse.de use fallback handling to LABEL for readme.beta string
Fri Mar 5 13:00:00 2010 msAATTsuse.de - removed nsswitch conf from being copied before the packagemanager is called the first time. that was a bad idea. Imagine you have configured ldap for passwd or something. It should use nsswitch.conf coming with the glibc installation in the chroot.
Fri Mar 5 13:00:00 2010 msAATTsuse.de - fixed root tree creation build inconsistencies because of missing libraries at the beginning of the root tree creation. The first fix for this bug did not work in mixed arch environments (bnc #536256)
Thu Mar 4 13:00:00 2010 adrianAATTsuse.de
* make them bootable and yast working again, fixing linked packages for all archs
Thu Mar 4 13:00:00 2010 adrianAATTsuse.de change string in README.BETA to \"SUMMARY + BETA_VERSION\"
Thu Mar 4 13:00:00 2010 msAATTsuse.de - added better log information about size calculation
Thu Mar 4 13:00:00 2010 adrianAATTsuse.de
* fix multiarch medias, when using metapackages with onlyarch
* sync arch fallback handling between repo and meta packages
Wed Mar 3 13:00:00 2010 msAATTsuse.de - v4.21 - ext4 (currently) should be mounted with \'nodelalloc\'; else we might run out of space unexpectedly...
Wed Mar 3 13:00:00 2010 msAATTsuse.de - added \'boot from harddrive\' as default menu selection for the installation images (CD+USB). Thus remove the request to remove the media after the image dump to the hard drive is complete. (bnc #583212)
Wed Mar 3 13:00:00 2010 msAATTsuse.de - rebuild documentation
Wed Mar 3 13:00:00 2010 msAATTsuse.de - renamed Xen kernel profile \'nex\' to \'xenk\'. The original name causes confusion to some people. Also removed xen support from netboot (pxe) images and adapted JeOS image descriptions.
Tue Mar 2 13:00:00 2010 ugAATTsuse.de
* fixed a quoting bug (bnc#584651)
Tue Mar 2 13:00:00 2010 adrianAATTsuse.de - support arch= statements for metapackages correctly - make missing metapackage for a required arch a warning (we missuse onlyarch atm)
Mon Mar 1 13:00:00 2010 msAATTsuse.de - allow empty lvmvolumes section, if one only wants to set the volume group name but no volumes except for root
Mon Mar 1 13:00:00 2010 msAATTsuse.de - some message cosmetics :-)
Mon Mar 1 13:00:00 2010 msAATTsuse.de - more visible message to check the migration report file
Mon Mar 1 13:00:00 2010 msAATTsuse.de - update migration table, sources are taken from zypper
Mon Mar 1 13:00:00 2010 msAATTsuse.de - v4.20 - migration: fixed operating system detection - fixed getLVMGroupName() not accessing an undefined value - fixed LVM cleanup code
Fri Feb 26 13:00:00 2010 msAATTsuse.de - use $FSInodeSize instead of fixed value
Fri Feb 26 13:00:00 2010 msAATTsuse.de - add spare 1.1 for vmsize
Fri Feb 26 13:00:00 2010 msAATTsuse.de - fixed getSize() function. The size of the inodes are part of the size calculation now
Fri Feb 26 13:00:00 2010 msAATTsuse.de - added trang as a build requirement to the spec - tighten up the XML checking a bit thus that some errors in the XML are detected at validation rather than later during processing. - cleanup: remove the matching of \"yes\" as a supported value for boolean types
Thu Feb 25 13:00:00 2010 msAATTsuse.de - don\'t log commands used to create the XML diff in the log file
Thu Feb 25 13:00:00 2010 msAATTsuse.de - v4.19 - added a JFYI headline in the log file and print only relevant information in the log excerpt in case of errors. This increases the chance to see the error (bnc #583125)
Thu Feb 25 13:00:00 2010 adrianAATTsuse.de redo my last commit, still fail if metapackage was not found for any architecure
Thu Feb 25 13:00:00 2010 adrianAATTsuse.de - missing metapackages are no error anymore, since we need fallback to noarch (but we still warn) - remove obsolete code
Thu Feb 25 13:00:00 2010 adrianAATTsuse.de KIWICollect: fix links for packages below /boot (bnc#579936) (done by Rudi)
Wed Feb 24 13:00:00 2010 msAATTsuse.de - fixed documentation example section
Wed Feb 24 13:00:00 2010 msAATTsuse.de - fixed spec file noarch, allowed with > 11.2 only
Wed Feb 24 13:00:00 2010 msAATTsuse.de - migration: update schema version to 4.4 - migration: update skip list
Tue Feb 23 13:00:00 2010 msAATTsuse.de - removed imagewriter from kiwi packages, it is provided as separate package now maintained by mbarringerAATTnovell.com
Tue Feb 23 13:00:00 2010 msAATTsuse.de - migration: fixed report messages, better English :)
Mon Feb 22 13:00:00 2010 msAATTsuse.de - migration: use pre tag to display zypper solutions
Mon Feb 22 13:00:00 2010 msAATTsuse.de - migration:
* added detection for packages installed multiple times
* improvement report explanations
Mon Feb 22 13:00:00 2010 msAATTsuse.de - v4.18 - fixed display of EULA messages
Sat Feb 20 13:00:00 2010 mbarringerAATTsuse.de Fixing bug with non-hybrid ISO files
Fri Feb 19 13:00:00 2010 msAATTsuse.de - fixed use of kiwi_cmdline in initrd
Fri Feb 19 13:00:00 2010 msAATTsuse.de - removed commandline from pxedeploy section. kernel commandline parameters are set by the kernelcmdline attribute now (bnc #577720). Update schema version to 4.4 and add an XSLT to remove commandline when required
Thu Feb 18 13:00:00 2010 mbarringerAATTsuse.de Bumping the imagewriter version
Thu Feb 18 13:00:00 2010 mbarringerAATTsuse.de Set the .desktop file for the imagewriter correctly
Thu Feb 18 13:00:00 2010 mbarringerAATTsuse.de Add icons for the imagewriter
Thu Feb 18 13:00:00 2010 mbarringerAATTsuse.de Cleaning the imagewriter up and also adding an \"about\" box
Thu Feb 18 13:00:00 2010 mbarringerAATTsuse.de Add COPYING file to comply with GPL
Thu Feb 18 13:00:00 2010 msAATTsuse.de - fixed function comments in runInteractive()
Thu Feb 18 13:00:00 2010 msAATTsuse.de - added support for additional kernel commandline options specified as kernelcmdline attribute (bnc #577720)
Wed Feb 17 13:00:00 2010 mbarringerAATTsuse.de Increase the imagewriter version
Wed Feb 17 13:00:00 2010 mbarringerAATTsuse.de Detect non-hybrid ISOs
Wed Feb 17 13:00:00 2010 adrianAATTsuse.de add changelog entry for last commit Conflicts: rpm/kiwi.changes
Wed Feb 17 13:00:00 2010 adrianAATTsuse.de fix arch condition handling for meta package collection
Wed Feb 17 13:00:00 2010 msAATTsuse.de - test
Wed Feb 17 13:00:00 2010 mbarringerAATTsuse.de Added USB key insertion/removal detection
Wed Feb 17 13:00:00 2010 msAATTsuse.de - added support for additional kernel commandline options specified in the new section (bnc #577720)
Wed Feb 17 13:00:00 2010 msAATTsuse.de - don\'t remove ldap and sasl in oemboot it\'s required for curl based downloads
Tue Feb 16 13:00:00 2010 msAATTsuse.de - moved lvmgroup attribute into the lvmvolumes section
Tue Feb 16 13:00:00 2010 msAATTsuse.de - v4.17 - update documentation - changed migration to use root path directly and don\'t mount the root device before. As we can\'t mount it read-only because it\'s already mounted read-write I decided to prevent the mount at all and exclude any remote mounted location by searching through /proc/mounts
Tue Feb 16 13:00:00 2010 msAATTsuse.de - don\'t remove libidn it\'s required for curl based downloads
Mon Feb 15 13:00:00 2010 msAATTsuse.de - v4.17 - fixed xen building with empty or no type=xen packages
Mon Feb 15 13:00:00 2010 adrianAATTsuse.de do not fail on creating directory which might be there already. (fixes openSUSE:Factory ftp tree generation)
Mon Feb 15 13:00:00 2010 adrianAATTsuse.de runtime fix from Rudi to process Eula.txt correctly without error
Mon Feb 15 13:00:00 2010 adrianAATTsuse.de do not die on not used release package
Mon Feb 15 13:00:00 2010 msAATTsuse.de - fixed cleanup of hosts file (bnc #579852)
Fri Feb 12 13:00:00 2010 msAATTsuse.de - update migration chapter
Thu Feb 11 13:00:00 2010 msAATTsuse.de - v4.16 - make setupSplash() to operate in a temp dir (bnc #579134)
Thu Feb 11 13:00:00 2010 msAATTsuse.de - fixed name resolution inside chroot if curl backend is used zypper uses libcurl for ftp transfers (bnc #578687)
Thu Feb 11 13:00:00 2010 mbarringerAATTsuse.de Adding a TODO file for the imagewriter
Wed Feb 10 13:00:00 2010 msAATTsuse.de - migration: fixed file find function - migration: fixed broken link search / removal
Wed Feb 10 13:00:00 2010 msAATTsuse.de - migration: added zypper repos to config.sh if not local
Wed Feb 10 13:00:00 2010 mbarringerAATTsuse.de Minor imagewriter text changes
Wed Feb 10 13:00:00 2010 msAATTsuse.de - update documentation
Wed Feb 10 13:00:00 2010 msAATTsuse.de - migration: fixed version lookup - migration: fixed report creation
Wed Feb 10 13:00:00 2010 msAATTsuse.de - fixed typo
Wed Feb 10 13:00:00 2010 msAATTsuse.de - fixed repo metadata download, cleanMount was called too early - fixed error handling in report file creation
Tue Feb 9 13:00:00 2010 msAATTsuse.de - enable noarch subpackages
Tue Feb 9 13:00:00 2010 msAATTsuse.de - update documentation
Mon Feb 8 13:00:00 2010 msAATTsuse.de - added bug ID
Mon Feb 8 13:00:00 2010 msAATTsuse.de - handle reboot request only if we are not in recovery mode
Mon Feb 8 13:00:00 2010 msAATTsuse.de - moved EC2 options into a new ec2config section (bnc #577883)
Mon Feb 8 13:00:00 2010 msAATTsuse.de - v4.15 - fixed default split section usage for iso type
Fri Feb 5 13:00:00 2010 msAATTsuse.de - added XSL transformation for latest XML changes Thanks to Robert for doing this
Fri Feb 5 13:00:00 2010 msAATTsuse.de - prevent double / in activateImage
Fri Feb 5 13:00:00 2010 msAATTsuse.de - v4.14 - update documentation due to latest XML changes - don\'t probeFileSystem if FSTYPE is nfs - mounting sys devices with -o nolock doesn\'t make much sense - use rpcbind as an alternative to portmap
Fri Feb 5 13:00:00 2010 msAATTsuse.de - update documentation
Thu Feb 4 13:00:00 2010 msAATTsuse.de - removed unneded xenconfig information from templates if dom0 setup is used
Thu Feb 4 13:00:00 2010 msAATTsuse.de - fixed migration mount setup and clean code allow zypper types dvd:// and iso:// to be used
Thu Feb 4 13:00:00 2010 msAATTsuse.de - fixed templates, Xen based OEM image should be a dom0 - Xen dom0 images doesn\'t require a xenconfig file
Wed Feb 3 13:00:00 2010 msAATTsuse.de - fixed migration mount setup and clean code
Wed Feb 3 13:00:00 2010 msAATTsuse.de - v4.13 - prevent XML pretty printer from swallowing comments
Wed Feb 3 13:00:00 2010 adrianAATTsuse.de enforce the \"print\" logging again for KIWICollect for significant speedup. However, we should rework the KIWICollect logging, but using KIWILog module would require significant speedup there.
Tue Feb 2 13:00:00 2010 msAATTsuse.de - fixed build
Tue Feb 2 13:00:00 2010 msAATTsuse.de - allow image=\"product\" for inst-source module - fixed NBD setup, make swap and RW an option
Tue Feb 2 13:00:00 2010 msAATTsuse.de - don\'t ask questions on oemboot pxe based install
Tue Feb 2 13:00:00 2010 msAATTsuse.de - added support for OEM installation via PXE. To setup your PXE boot server do the following: 1) create an OEM install ISO (format=\"iso\") 2) loop mount the created .iso file to /mnt and copy the following files to the PXE boot server:
* copy /mnt/boot/initrd => /srv/tftpboot/boot
* copy /mnt/boot/linux => /srv/tftpboot/boot
* copy /mnt/image.gz => /srv/tftpboot/image
* copy /mnt/image.gz.md5 => /srv/tftpboot/image 3) set the kernel commandline parameter pxe=1 via the append line in your PXE configuration. Alternatively the image can be stored on a FTP,HTTP server specified via the kiwiserver and kiwiservertype append information
Mon Feb 1 13:00:00 2010 msAATTsuse.de - added bug ID
Mon Feb 1 13:00:00 2010 msAATTsuse.de - v4.12 - don\'t move overlay mounts to real-root if NFS-root is used additionally prevent the ROOT_FSCK in case of NFS-root - allow NFSROOT and NBDROOT to be overlayed with a remote read-write location
Mon Feb 1 13:00:00 2010 msAATTsuse.de - fixed incorrect handling of unit=\"G\" values (bnc #574660)
Mon Feb 1 13:00:00 2010 msAATTsuse.de - v4.11 - added kernel/initrd update hotfix mechanism based on kexec It is possible to put the kernel file named linux.kexec and the initrd file named initrd.kexec on the first partition of a USB stick. If you plugin the stick and boot with the kernel option hotfix=1 it allows you to replace the existing kernel and initrd with the one on the stick - increased wait time for dhcp lease file up to 20sec (bnc #575561)
Mon Feb 1 13:00:00 2010 adrianAATTsuse.de create 11.3 fork, which is current factory. We basically need this to destinguish between kiwi 4.1 and 3.74 to write correct kiwi xml again.
Thu Jan 28 13:00:00 2010 msAATTsuse.de - update schema documentation
Thu Jan 28 13:00:00 2010 msAATTsuse.de - make XSL diff more readable
Wed Jan 27 13:00:00 2010 msAATTsuse.de - set XML element only if it\'s not already set with that value - better XML diff output in logfile
Tue Jan 26 13:00:00 2010 msAATTsuse.de - fixed build
Mon Jan 25 13:00:00 2010 msAATTsuse.de - v4.10 - applied XML changes with the following effects
* the image type is no longer an element content but an attribute called image=\"type\" inside the type element
* all oem elements are now part of the new oemconfig section
* the sections oemconfig,pxedeploy,split,vmwareconfig,xenconfig,lvmvolumes are now type specific and have to be specified inside a type
* migration code has been adapted to 4.1 schema
* documentation has been adapted to 4.1 schema - added clicfs as spec file requirement (bnc #573357)
Mon Jan 25 13:00:00 2010 msAATTsuse.de - added pretty xsl
Mon Jan 25 13:00:00 2010 msAATTsuse.de - fixed boot type check
Mon Jan 25 13:00:00 2010 msAATTsuse.de - print a jing helper message if schema validation failed
Mon Jan 25 13:00:00 2010 msAATTsuse.de - update to XML version 4.1 - update documentation
Fri Jan 22 13:00:00 2010 msAATTsuse.de - update migration XML creation
Fri Jan 22 13:00:00 2010 msAATTsuse.de - fixed XML parsing - fixed XML diff
Fri Jan 22 13:00:00 2010 msAATTsuse.de - fixed XML parsing
Fri Jan 22 13:00:00 2010 msAATTsuse.de - fixed XML parsing
Fri Jan 22 13:00:00 2010 msAATTsuse.de - fixed XML parsing
Fri Jan 22 13:00:00 2010 msAATTsuse.de - fixed XML parsing
Fri Jan 22 13:00:00 2010 msAATTsuse.de - fixed XML parsing
Fri Jan 22 13:00:00 2010 msAATTsuse.de - changed parser function according to new XML layout
Thu Jan 21 13:00:00 2010 msAATTsuse.de - first start of better XML description moving pxedeploy split vmwareconfig xenconfig lvmvolumes into type adding new oemconfig section
Thu Jan 21 13:00:00 2010 cwhAATTsuse.de Added missing requires for sysopen constants
Wed Jan 20 13:00:00 2010 msAATTsuse.de - fixed missing ddn call to solve the device node in vmxboot too (bnc #571948)
Wed Jan 20 13:00:00 2010 msAATTsuse.de - v3.95 - fixed missing ddn call to solve the device node (bnc #571948)
Wed Jan 20 13:00:00 2010 msAATTsuse.de - removes sax2 and let the 11.2 based example use the X11 auto configuration feature in the suse-min-gnome example image description
Tue Jan 19 13:00:00 2010 cwhAATTsuse.de Integrated KIWIIsoLinux-gen-s390-cd-kernel.pl into KIWIIsoLinux.pm
Tue Jan 19 13:00:00 2010 msAATTsuse.de - v3.94 - fixed baselibs setup for 64bit image builds - fixed split grub setup for install CD/Stick - fixed split section parsing, remove trailing slash if no information follows
Mon Jan 18 13:00:00 2010 msAATTsuse.de - use -F for mke2fs calls
Mon Jan 18 13:00:00 2010 msAATTsuse.de - don\'t let xsltproc write into fixed /tmp location (bnc #571558) - prevent USB device scan for pxe boot images (bnc #570961)
Mon Jan 18 13:00:00 2010 msAATTsuse.de - added config function to disable Ctrl-Alt-Del in inittab
Fri Jan 15 13:00:00 2010 msAATTsuse.de - added bug number
Fri Jan 15 13:00:00 2010 msAATTsuse.de - allow AOEROOT to contain the read-write device
Fri Jan 15 13:00:00 2010 msAATTsuse.de - v3.93 - moved package deletion into own function and adapt the examples. remove --noscripts for deleting packages this could cause files to stay in the system which has a bad impact core utilities like mkinitrd. If for example busybox is uninstalled without calling the postscript the mkinitrd setup links will stay as broken links and cause mkinitrd to stop working (bnc #570948)
Thu Jan 14 13:00:00 2010 msAATTsuse.de - update docs
Thu Jan 14 13:00:00 2010 msAATTsuse.de - v3.92 - fixed typo in getPXEDeployTimeout() - forbid / to be specified in lvmvolumes (bnc #570398) - allow absolute size value for lvm volumes (bnc #570396)
Wed Jan 13 13:00:00 2010 adrianAATTsuse.de fix writing of RELEASE line in content file
Wed Jan 13 13:00:00 2010 ugAATTsuse.de - more KIWIURL::quote() fixes (bnc #561855)
Wed Jan 13 13:00:00 2010 msAATTsuse.de - create /srv/tftpboot/pxelinux.cfg/default only if not exist
Wed Jan 13 13:00:00 2010 msAATTsuse.de - rebuild docs
Wed Jan 13 13:00:00 2010 msAATTsuse.de - don\'t set disk cmdline parameter for pxe local grub setup
Tue Jan 12 13:00:00 2010 cwhAATTsuse.de Added autobuild script for generationg s390 cd kernel
Tue Jan 12 13:00:00 2010 msAATTsuse.de - fixed clicfs usage in combination with pxe image type
Tue Jan 12 13:00:00 2010 cwhAATTsuse.de - Fixed s390 boot
Mon Jan 11 13:00:00 2010 msAATTsuse.de - partially reverted last patch - fixed md5 file creation for clicfs images
Mon Jan 11 13:00:00 2010 msAATTsuse.de - v3.91 - fixed md5 file creation for clicfs images when used with PXE - fixed validateSize() to take care for zblocks
Mon Jan 11 13:00:00 2010 msAATTsuse.de - added first version of report html creation - again fixed KIWIURL::quote(). perl file checks doesn\'t allow quoted items (bnc #561855)
Mon Jan 11 13:00:00 2010 cooloAATTsuse.de do not error out - there are architectures without gfxboot.cfg (basically all but pcs)
Sat Jan 9 13:00:00 2010 msAATTsuse.de - fixed use of uninitialized value (bnc #569191)
Fri Jan 8 13:00:00 2010 msAATTsuse.de - v3.90 - changed default type to oem for migration result
Fri Jan 8 13:00:00 2010 msAATTsuse.de - fixed handling of oem-reboot request. preinit needs to run before this request is processed (bnc #563864)
Fri Jan 8 13:00:00 2010 msAATTsuse.de - migration: allow skipping parts of the process
Fri Jan 8 13:00:00 2010 msAATTsuse.de - fixed quoting when importing kernel cmdline (bnc #536309)
Thu Jan 7 13:00:00 2010 msAATTsuse.de - migration: added modified files tree
Thu Jan 7 13:00:00 2010 msAATTsuse.de - fixed percentage counter
Thu Jan 7 13:00:00 2010 msAATTsuse.de - migration: added modified files information
Thu Jan 7 13:00:00 2010 msAATTsuse.de - migration: fixed xml creation
Thu Jan 7 13:00:00 2010 msAATTsuse.de - migration: added a todo
Thu Jan 7 13:00:00 2010 msAATTsuse.de - migration performance fixes
Thu Jan 7 13:00:00 2010 msAATTsuse.de - added udevPending() to waitFor * functions (bnc #547862)
Wed Jan 6 13:00:00 2010 msAATTsuse.de - migration: fixed version detection
Tue Jan 5 13:00:00 2010 msAATTsuse.de - fixed cache creation
Tue Jan 5 13:00:00 2010 msAATTsuse.de - fixed option setup for rpm -Va
Tue Jan 5 13:00:00 2010 msAATTsuse.de - migration: create overlay root tree as hard linked list
Tue Jan 5 13:00:00 2010 msAATTsuse.de - some work on the migration front [still WIP]:
* changed to report -> perform system, fixed solvable creation and provide better information about package and pattern conflicts. Changed system to use the zypper defined repos and product information for the migration
Mon Jan 4 13:00:00 2010 msAATTsuse.de - fixed use of quiet variable
Mon Jan 4 13:00:00 2010 msAATTsuse.de - use default inode count for lvmparts (bnc #567580)
Mon Jan 4 13:00:00 2010 msAATTsuse.de - v3.89 - fixed dirPath() function, related to (bnc #561855) - fixed KIWIURL::quote() for special \'$\' char (bnc #561855)
Mon Dec 21 13:00:00 2009 cwhAATTsuse.de fixed usage of string relational operator in numerical context
Fri Dec 18 13:00:00 2009 adrianAATTsuse.de sync more parameters for the EFI case
Fri Dec 18 13:00:00 2009 adrianAATTsuse.de limit volume id\'s to 32bytes or genisoimage aborts
Thu Dec 17 13:00:00 2009 cwhAATTsuse.de fixed efi boot
Thu Dec 17 13:00:00 2009 msAATTsuse.de - v3.88 - removed adaptec-firmware from SLED boot images. The package does not exist on SLED (bnc #562224)
Wed Dec 16 13:00:00 2009 msAATTsuse.de - v3.87 - added support for plaintext passwords
Tue Dec 15 13:00:00 2009 msAATTsuse.de - fixed user cancel exception text (bnc #557100)
Tue Dec 15 13:00:00 2009 msAATTsuse.de - v3.86 - call scripts in C env for LC_ALL and LANG (bnc #558693) - fixed handling of dir:// and file:// (bnc #561855) - bind mount /var/run/dbus into chroot (bnc #519764)
Mon Dec 14 13:00:00 2009 msAATTsuse.de - added parted to oemboot
Mon Dec 14 13:00:00 2009 msAATTsuse.de - update kiwi-tools
Mon Dec 14 13:00:00 2009 msAATTsuse.de - update kiwi-tools
Mon Dec 14 13:00:00 2009 msAATTsuse.de - fixed password salt creation
Mon Dec 14 13:00:00 2009 msAATTsuse.de - added kiwi-tools
Mon Dec 14 13:00:00 2009 msAATTsuse.de - clean packs
Mon Dec 14 13:00:00 2009 msAATTsuse.de - updated kiwi-tools packages
Mon Dec 14 13:00:00 2009 mbarringerAATTsuse.de - Removing cross-platform support from the Qt imagewriter - Adding native Windows imagewriter
Fri Dec 11 13:00:00 2009 msAATTsuse.de - update dcounter in kiwi-tools. Adding the option -l which allows to use dcounter in progress dialogs (dialog program)
Fri Dec 11 13:00:00 2009 msAATTsuse.de - show disk size value in MB and only if > 0 (bnc #562190) - put install progress information into dialog (bnc #562185) - track restored files in percentage (bnc #562188)
Fri Dec 11 13:00:00 2009 cwhAATTsuse.de - changed mkisofs parameters in KIWICollect.pm the way similar like autobuild did before - fixed mkisofs parameters for ia64 - added ppc support to KIWIIsoLinux (KIWIIsoLinux-AppleFileMapping.txt is part of it) - added KIWIIsoLinux-AppleFileMapping.txt to spec file
Fri Dec 11 13:00:00 2009 msAATTsuse.de - added adaptec-firmware to iso/net and oemboot (bnc #562224)
Thu Dec 10 13:00:00 2009 msAATTsuse.de - use blowfish extension for password creation (bnc #562105)
Thu Dec 10 13:00:00 2009 msAATTsuse.de - fixed storage of lvmgroup inside KIWIBoot object
Thu Dec 10 13:00:00 2009 msAATTsuse.de - fixed boot label setup for installstick and installcd modus
Thu Dec 10 13:00:00 2009 msAATTsuse.de - fixed condition for calling vgchange -an
Wed Dec 9 13:00:00 2009 adrianAATTsuse.de fix repomd creation code
Wed Dec 9 13:00:00 2009 adrianAATTsuse.de fix compare operator
Wed Dec 9 13:00:00 2009 msAATTsuse.de - moved repartition functions to KIWILinuxRC
Wed Dec 9 13:00:00 2009 msAATTsuse.de - fixed home device fstab entry, uses disk by id now
Wed Dec 9 13:00:00 2009 ugAATTsuse.de implementation of hybridpersistent key (bnc #557100)
Wed Dec 9 13:00:00 2009 msAATTsuse.de - v3.85 - fixed user/group setup for multiple users (bnc #561749)
Wed Dec 9 13:00:00 2009 msAATTsuse.de - added information about repo solvable creation - fixed solvable creation if only one URL is used
Tue Dec 8 13:00:00 2009 msAATTsuse.de - improved solvable caching code and added functions to KIWISatSolver module for extracting SaT informations about dependency and queueing problems
Tue Dec 8 13:00:00 2009 msAATTsuse.de - adapt perl code to last changes in satsolver plugin
Tue Dec 8 13:00:00 2009 msAATTsuse.de - fixed satsolver usage, pool_setarch is required for correct solving results. Also prune_best_arch_name_version() is now used instead of prune_to_best_arch
Tue Dec 8 13:00:00 2009 adrianAATTsuse.de drop the entire support for NO_ISO, since it is legacy and is not used anymore.
Tue Dec 8 13:00:00 2009 adrianAATTsuse.de ups, if statement should be in the opposite way around
Mon Dec 7 13:00:00 2009 msAATTsuse.de - v3.84 - fix syntax error when calling warning log function - backport content meta data generation out of product files from release packages
Mon Dec 7 13:00:00 2009 adrianAATTsuse.de Support content file creation via data from selected release packages and their specs inside of .prod file.
Thu Dec 3 13:00:00 2009 msAATTsuse.de - v3.83 - added busybox for to netboot descriptions and changed compressed tftp download to busybox tftp because only this implementations allows to work with pipes (bnc #559830) - removed 10.3 support
Thu Dec 3 13:00:00 2009 adrianAATTsuse.de move kiwi installation source plugins from novell forge. These plugins are needed to create product medias for openSUSE 11.1 and later. The 11.0 plugin has been dropped, since it never was in a working state.
Wed Dec 2 13:00:00 2009 msAATTsuse.de - added support for custom LVM group name. Default is kiwiVG - fixed LVM based recovery workflow. the recovery needs to know about the separate boot partition. Additionally the recovery partition must be a separate partition outside LVM
Wed Dec 2 13:00:00 2009 adrianAATTsuse.de fix logging, not warnings for progress reporting.
Tue Dec 1 13:00:00 2009 adrianAATTsuse.de fail if a plugin dir is configured, but does not exist
Mon Nov 30 13:00:00 2009 msAATTsuse.de - added options --fs-max-mount-count and --fs-check-interval as well as the XML type attribute fsnocheck which deactivates the filesystem check at all.
Mon Nov 30 13:00:00 2009 msAATTsuse.de - fixed root device setup for xenboot in EC2 (bnc #559143)
Mon Nov 30 13:00:00 2009 msAATTsuse.de - removed kernel-ec2-extra from xenboot, not needed (bnc #559106)
Mon Nov 30 13:00:00 2009 msAATTsuse.de - v3.82 - fixed size setup which was ignored due to last fix (bnc #559098)
Thu Nov 26 13:00:00 2009 msAATTsuse.de - v3.81 - call images.sh / config.sh scripts in POSIX env (bnc #558693) - fixed invalid link setup in createImageLiveCD() (bnc #558666) - fixed size / inode calcuation due to wrong unit (bnc #555688)
Thu Nov 26 13:00:00 2009 adrianAATTsuse.de fix call of warning method in KIWILog
Wed Nov 25 13:00:00 2009 msAATTsuse.de - fixed setup of xencons when building Xen domU images (bnc #557791)
Wed Nov 25 13:00:00 2009 msAATTsuse.de - fixed revision information in kiwi --version info - fixed Makefile clean target
Tue Nov 24 13:00:00 2009 msAATTsuse.de - v3.80 - fixed root tree creation build inconsistencies due to missing libraries at the beginning of the root tree creation. Any glibc linked program uses /etc/nsswitch.conf and from there requires /lib(64)/libnss * libraries to do user/group to id resolution. If the operation happens chrooted, the libs needs to be there. The fix will install the glibc package which provides these libraries in a $root/baselibs directory first and moves them to $root. After that process the package manager is again called to install the bootstrap listed packages follewed by the rest of the specified packages (bnc #536256)
Mon Nov 23 13:00:00 2009 msAATTsuse.de - v3.79 - fixed clicfs boot by preventing root filesystem checks via ROOTFS_FSCK=\"0\", also don\'t use run-init for clic (bnc #557661)
Thu Nov 19 13:00:00 2009 msAATTsuse.de - v3.78 - fixed umount calls before init is called. Due to this fix the df information after login should be correct
Wed Nov 18 13:00:00 2009 msAATTsuse.de - added openSUSE-11.2 target for migration (bnc #555724)
Wed Nov 18 13:00:00 2009 msAATTsuse.de - v3.77 - fixed search for gfxboot file du to changes in the gfxboot-devel package for 11.2 (bnc #556130)
Tue Nov 17 13:00:00 2009 msAATTsuse.de - added LVM feature to allow parts of the filesystem in a separate volume. The setup of volumes happens in the new section
Mon Nov 16 13:00:00 2009 msAATTsuse.de - update XML to 3.8
Mon Nov 16 13:00:00 2009 msAATTsuse.de - v3.76 - don\'t require preinit to call init (bnc #521456)
Thu Nov 12 13:00:00 2009 msAATTsuse.de - remove pivot root calls (old code) and changed preinit handling to let preinit run like init. If preinit runs the kernel already knows the system image root as / and preinit always ends with exec init (bnc #521456)
Wed Nov 11 13:00:00 2009 msAATTsuse.de - fixed exit code evaluation in Dialog function. The value of the evaluated exit code was undefined because it depended on which subshell finished first. The solution is to prevent parameter subshells when building the dialog parameterlist (bnc #547864)
Mon Nov 9 13:00:00 2009 msAATTsuse.de - v3.75 - fixed spec file for s390 architecture
Fri Nov 6 13:00:00 2009 msAATTsuse.de - fixed sysconfig/kernel setup for old mkinitrd (bnc #547571)
Fri Nov 6 13:00:00 2009 msAATTsuse.de - really remove inittab files from examples
Fri Nov 6 13:00:00 2009 msAATTsuse.de - fixed xslt processing. The possible change to the XML file is now written to /tmp to avoid writing into read-only filesystem (bnc #552617)
Fri Nov 6 13:00:00 2009 msAATTsuse.de - removing displaymanager overlay files and use the baseUpdateSysConfig() function instead
Fri Nov 6 13:00:00 2009 msAATTsuse.de - removing inittab overlay files and use baseSetRunlevel() instead
Thu Nov 5 13:00:00 2009 adrianAATTsuse.de Another place what broke the mkisofs sort file
Thu Nov 5 13:00:00 2009 adrianAATTsuse.de Fix sort file for mkisofs, fixes boot on crappy BIOSes.
Thu Nov 5 13:00:00 2009 msAATTsuse.de - added support for timezone in JeOS - changed suseActivateDefaultServices() to activate services only without calling the post scripts of installed RPM\'s
Wed Nov 4 13:00:00 2009 msAATTsuse.de - added missing usb host controller module (ohci) to all boot image descriptions except vmxboot which doesn\'t need it
Tue Nov 3 13:00:00 2009 msAATTsuse.de - added Patches from Robert Schweikert
* added suse-min-gnome example image description
Tue Nov 3 13:00:00 2009 msAATTsuse.de - removed 10.3 examples
Tue Nov 3 13:00:00 2009 msAATTsuse.de - added Patches from Robert Schweikert
* change deploy section to pxedeploy section and update schemaversion from 3.7 to 3.8 via xsl stylesheet
Tue Nov 3 13:00:00 2009 msAATTsuse.de - v3.75 - added Patches from Robert Schweikert
* new function baseSetRunlevel to allow setup of runlevel in inittab
Tue Nov 3 13:00:00 2009 msAATTsuse.de - added ieee1394 firewire modules to support liveCD on firewire DVD drive (bnc #479020)
Mon Nov 2 13:00:00 2009 mantelAATTsuse.de only basic version of vim is installed; we disable syntax highlighting in order to avoid irritating error message on vim startup.
Wed Oct 28 13:00:00 2009 msAATTsuse.de - OEM recover/repair
* make sure passwd/shadow and group files will be preserved
* make sure RPM database will be preserved
Wed Oct 28 13:00:00 2009 adrianAATTsuse.de use true/false instead of yes/no to harmonize with rest of kiwi
Wed Oct 28 13:00:00 2009 adrianAATTsuse.de use yes/no in REPO_ONLY to harmonize with MULTIPLE_MEDIA
Wed Oct 28 13:00:00 2009 adrianAATTsuse.de remove not used KIWI_COLLECT_TERMINAL_LOG enviroment variable, we use the --logfile switch since 11.1
Wed Oct 28 13:00:00 2009 adrianAATTsuse.de cleanup log states (lots of Warning -> Information) and drop obsolete code.
Tue Oct 27 13:00:00 2009 msAATTsuse.de - fixed string comparison
Tue Oct 27 13:00:00 2009 msAATTsuse.de - kiwi-instsource changes done by cooloAATTnovell.com
* fix 32bit debuginfos
Tue Oct 27 13:00:00 2009 msAATTsuse.de - offer only languages for selection which are part of the initrd. The element defines which locales and translations are part of the initrd. If only one language is available no selection dialog will be opened
Tue Oct 27 13:00:00 2009 cooloAATTsuse.de fix 32bit debuginfos
Tue Oct 27 13:00:00 2009 msAATTsuse.de - kiwi-instsource changes done by cooloAATTnovell.com
* fixed logging
* fixed several uninitialized variables
* fixed debuginfo handling
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de add all debuginfo packages
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de little cleanup
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de have defaults for product variables
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de more fixes for logging
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de one less unintialized variable
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de more cleanup in the logging of products
Mon Oct 26 13:00:00 2009 cooloAATTsuse.de trying to fix logging
Mon Oct 26 13:00:00 2009 msAATTsuse.de - added missing config.sh script to strip down locale information
Mon Oct 26 13:00:00 2009 msAATTsuse.de - added bug ID
Mon Oct 26 13:00:00 2009 msAATTsuse.de - don\'t call ldconfig when loading KIWILinuxRC functions
Mon Oct 26 13:00:00 2009 msAATTsuse.de - better changelog entry
Fri Oct 23 14:00:00 2009 msAATTsuse.de - set splash to verbose if there is a systemException (bnc #547821) - check for block device when retrieving MBR ID (bnc #547821)
Fri Oct 23 14:00:00 2009 msAATTsuse.de - added DOBACKUP variable to easily switch on/off the backup creation in recovery mode (bnc #546057)
* throw reboot exception if backup files can\'t be created
* create backup files for files in recovery.tar.gz only
Wed Oct 21 14:00:00 2009 msAATTsuse.de - use cmp to compare files first before diffing them. Prevent second find call for backup files. This increases the recovery performance in repair mode. Additionally write backup diffs to /tmp/backup (bnc #546057)
Tue Oct 20 14:00:00 2009 msAATTsuse.de - added support for lang and keytable in cmdline. Support is only available with the gfxboot code from >= 11.2 (bnc #547915) - changed fbiterm return code evaluation. Echo the return code from the last instead of relying to the exit code of the fbiterm terminal (bnc #547864)
Mon Oct 19 14:00:00 2009 msAATTsuse.de - search .backup files in home and etc only (bnc #546057)
Fri Oct 16 14:00:00 2009 mbarringerAATTsuse.de Add changelog message to kiwi.changes
Fri Oct 16 14:00:00 2009 mbarringerAATTsuse.de Fixing bug 547143 - kiwi imagewriter needs .iso filetype filter too
Wed Oct 14 14:00:00 2009 msAATTsuse.de - don\'t remove libgcc_s from initrd. It\'s required for programs which uses pthread_cancel()
Wed Oct 14 14:00:00 2009 msAATTsuse.de - prevent automatic CD eject on kiwi install. If the tray is blocked (some servers hide their drives behind doors) the boot CD/DVD with the OEM image ends up back in the machine. Therefore we open a popup window asking to user to remove the install media before continuing
Tue Oct 13 14:00:00 2009 msAATTsuse.de - added udevPending call in waitForUSBDeviceScan() to make sure the device nodes are created if we leave the function
Mon Oct 12 14:00:00 2009 msAATTsuse.de - fixed clicfs usage for vmx,oem and usbboot. Needs the same boot partition like the DM squash setup uses - fixed clicfs mount on bootvm creation
Mon Oct 12 14:00:00 2009 msAATTsuse.de - fixed error log switch in Echo function
Mon Oct 12 14:00:00 2009 msAATTsuse.de - fixed hwclock and timezone setup (bnc #546096) - fixed 11.2 JeOS template, no kernel- *-base anymore
Thu Oct 8 14:00:00 2009 msAATTsuse.de - deactivate backup MBR at 0x800 (bnc #539505)
Thu Oct 8 14:00:00 2009 msAATTsuse.de - leave time message in kiwi.log file
Thu Oct 8 14:00:00 2009 msAATTsuse.de - update schema documentation
Thu Oct 8 14:00:00 2009 msAATTsuse.de - fixed setup of doc exclusion for zypper (bnc #544874) - added boot timer for kiwi boot images like the kernel does
Thu Oct 8 14:00:00 2009 msAATTsuse.de - added kiwi-rpmlintrc filter for boot translations - fixed css file encoding in documentation - update kiwi-tools in sle11 repo
Thu Oct 8 14:00:00 2009 msAATTsuse.de - added boot timer for kiwi boot images like the kernel does
Wed Oct 7 14:00:00 2009 msAATTsuse.de - improved umount code for auto mount of removable storage devices. The function umountDevice() takes over the task of umounting all filesystems associated with the given device - use searchBIOSBootDevice for usbboot instead of USBStickDevice since we have the unique MBR ID in place this is the better method to search for the boot device
Wed Oct 7 14:00:00 2009 msAATTsuse.de - create backup files for /etc and /home only in Recovery mode This is done to reduce the runtime the recovery process takes
Tue Oct 6 14:00:00 2009 msAATTsuse.de - fixed race condition in waitForStorageDevice() - deactivate automatic filesystem check for clicfs based livesystems
Tue Oct 6 14:00:00 2009 msAATTsuse.de - Add cancel/reboot menu item in recovery bootloader configuration. This will help avoid accidental recovery invocation, which could be a potential issue. The cancel/reboot item is now the default selection, and the delay is now 30 seconds giving the user more time to contemplate their restoration options (bnc #544420)
Mon Oct 5 14:00:00 2009 msAATTsuse.de - fixed old X11R6 lib/lib64 path
Mon Oct 5 14:00:00 2009 msAATTsuse.de - again fixed stripUnusedLibs()
Mon Oct 5 14:00:00 2009 msAATTsuse.de - moved destination path check to function where it is needed
Mon Oct 5 14:00:00 2009 msAATTsuse.de - fixed race condition in setupRecoveryArchive() when creating the tar archive - fixed fbiterm support for SLE10 - fixed baseStripUnusedLibs
Mon Oct 5 14:00:00 2009 msAATTsuse.de - added and improved official JeOS templates to the kiwi git source tree. The official templates used by the SDK product and the SuSE Studio online service are now provided via the kiwi package kiwi-templates (bnc #521970)
Mon Oct 5 14:00:00 2009 msAATTsuse.de - fixed detection of USB install media
Mon Oct 5 14:00:00 2009 msAATTsuse.de - added import attribute in section to allow default imports if not profile was set on the commandline
Fri Oct 2 14:00:00 2009 msAATTsuse.de - fixed handling of profiled preferences sections
Fri Oct 2 14:00:00 2009 msAATTsuse.de - fixed bool value evaluation in KIWIXML.pm::get *() - added suseImportBuildKey() helper function used in JeOS templates (bnc #521970)
Thu Oct 1 14:00:00 2009 msAATTsuse.de - added support for , default ID=83 (bnc #543118) - reload MBR in restore mode, also recreate swap and home systems if defined in restored fstab (bnc #542648)
Thu Oct 1 14:00:00 2009 msAATTsuse.de - fixed stick detection if multiple sticks are plugged in stickFound variable was set too early, thanks to Axel Theilmann - use bc for more exact progress calculation
Thu Oct 1 14:00:00 2009 msAATTsuse.de - clear screen after install confirmation
Wed Sep 30 14:00:00 2009 msAATTsuse.de - oemboot: re-install grub bootloader into partition if the partition contains a bootloader signature already (bnc #543123) - added backup diff in recovery mode. This will add a file~ diff file for each file changed according to the recovery contents.
Tue Sep 29 14:00:00 2009 msAATTsuse.de - improved restore feature which also restores the filesystem before restoring files (bnc #542648)
Mon Sep 28 14:00:00 2009 msAATTsuse.de - fixed typos and mistakes in the documentation, Thanks to Robert who found them
Thu Sep 24 14:00:00 2009 msAATTsuse.de - limit language selection to the installed locales (bnc #539398)
Mon Sep 21 14:00:00 2009 msAATTsuse.de - fixed LANG and locale use
Mon Sep 21 14:00:00 2009 msAATTsuse.de - added OEM restore mode (bnc #539390) - evaluate kiwikernelmodule variable from cmdline also in modules.order mode where loading is done by udev (bnc #525345) - don\'t remove libblkid1 from initrd (bnc #505580) - remove reserved blocks in any case when mounting clic by calling tune2fs -m 0 (bnc #505580)
Sun Sep 20 14:00:00 2009 msAATTsuse.de - preserve ownership if xsltproc changes the xml file
Fri Sep 18 14:00:00 2009 msAATTsuse.de - added pot template for translations (bnc #539398)
Thu Sep 17 14:00:00 2009 msAATTsuse.de - added fbiterm to oemboot boot images. This allows to display wide screen characters on the framebuffer console and therefore enabled kiwi\'s dialog windows to be multilingual (bnc #539398) - fixed baseStripLocales() function
Wed Sep 16 14:00:00 2009 msAATTsuse.de - fixed bool value evaluation for oem-recovery
Wed Sep 16 14:00:00 2009 msAATTsuse.de - added backup MBR to 0x800 if --grub-chainload is in use also added FDST flag to 0x190 for preload setup. We need to take care for that value if other preloads requires something similar it should be an option (bnc #539505)
Mon Sep 14 14:00:00 2009 msAATTsuse.de - allow ensconce as packagemanager type - fixed bool content for rpm-check-signatures - fixed inode calculation, needs integer result
Sat Sep 12 14:00:00 2009 msAATTsuse.de - link files to create live ISO in createImageLiveCD() instead of moving them (bnc #412689) - do kiwi test mounts with readonly option (bnc #538355) - use option -J -f to call genisoimage (bnc #538390)
Thu Sep 10 14:00:00 2009 msAATTsuse.de - disabled check for removable flag in USBStickDevice() function (bnc #535113)
Thu Sep 10 14:00:00 2009 msAATTsuse.de - allow cmdline line overwrites only if the variable ALLOW_CMDLINE_OVERWRITE=yes is set in config. or config.default. By default no overwrites are allowed which should add an acceptable level of security (bnc #536309)
Thu Sep 3 14:00:00 2009 msAATTsuse.de - allow NBDROOT to be set via kernel cmdline (bnc #536309)
Thu Sep 3 14:00:00 2009 msAATTsuse.de - fixed satplugin getInstallList() function, did not allocate enough space to hold the package size. This causes the buffer overflow inside the binding. Also added the flags -D_FORTIFY_SOURCE=2 -fstack-protector to build the same binding binary as if kiwi is build inside the BS. Also fixed the spec file and removed the versioned requires of satsolver-tools (bnc #532894)
Wed Sep 2 14:00:00 2009 msAATTsuse.de - added encoding information to all templates - added log information about temporary XML changes for all modes of kiwi, removed the used xml output file
Tue Sep 1 14:00:00 2009 msAATTsuse.de - fixed virtual disk creation with clicfs involved
Tue Sep 1 14:00:00 2009 msAATTsuse.de - added option --grub-chainload which allows the virtual disk based images to chainload grub from partition one. This is required for some preload processes (bnc #529850) - changed filesystem detection by using blkid instead of a raw dump + file call. Related to (bnc #529850) - disabled partition table re-write for hybrid ISO\'s also see the comment in KIWIIsoLinux.pm
Fri Aug 28 14:00:00 2009 msAATTsuse.de - fixed partition size check which failed if oem-systemsize was set but the disk was smaller than the configured size
Thu Aug 27 14:00:00 2009 msAATTsuse.de - added release tag to sattools_version
Wed Aug 26 14:00:00 2009 msAATTsuse.de - added support for parted in oem repartition code
Wed Aug 26 14:00:00 2009 msAATTsuse.de - removed check for luks mapping in functions which are surely not called if the luks extension is used
Tue Aug 25 14:00:00 2009 msAATTsuse.de - fixed grep call, only return code is of interest
Tue Aug 25 14:00:00 2009 msAATTsuse.de - support new syslinux >= 3.82 format (bnc #530255) - added function dn to support linux device node name convention: Converts from partition name to disk name (bnc #529580)
Tue Aug 25 14:00:00 2009 msAATTsuse.de - fixed bootloader title setup if multiple kernels are installed - restructured oem repartition code to allow use of parted. parted does not allow to create custom partition id\'s they are the result of a sequence of subsequently created partitions. parted implementation will follow soon - allow only bool (true/false) content for the oem- * boolean attributes
Fri Aug 21 14:00:00 2009 msAATTsuse.de - remove kernel-. *-base from all boot image descriptions for suse-11.2. They don\'t exist anymore
Thu Aug 20 14:00:00 2009 msAATTsuse.de - fixed spec file
Thu Aug 20 14:00:00 2009 msAATTsuse.de - fixed boot default size setup (bnc #532371) - fixed KIWIBoot::getStorageSize function, use blockdev - fixed dialog input by calling setctsid before dialog
Wed Aug 19 14:00:00 2009 msAATTsuse.de - fixed usb stick size check (bnc #532371)
Wed Aug 19 14:00:00 2009 msAATTsuse.de - removed duplicate creation of read/write filesystem
Tue Aug 18 14:00:00 2009 msAATTsuse.de - changed title for install media to \"Install/Restore ...\"
Mon Aug 17 14:00:00 2009 msAATTsuse.de - added support for language selection in displayEULA function. The function now uses the same file names according to the licenses.tgz file. If no language specific license file could be found the function defaults to license.txt and if that file also doesn\'t exist it defaults to EULA.txt (bnc #530497)
Fri Aug 14 14:00:00 2009 msAATTsuse.de - fixed main::mount() method, setup of umountStack was wrong now using mount destination for umount not source
Fri Aug 14 14:00:00 2009 msAATTsuse.de - fixed isohybrid created partition table to be DOS compatible This means the first partition starts at sector 64
Fri Aug 14 14:00:00 2009 msAATTsuse.de - update documentation, add information about LVM and repository priorities, differences between smart and zypper
Thu Aug 13 14:00:00 2009 msAATTsuse.de - fixed typo
Thu Aug 13 14:00:00 2009 msAATTsuse.de - convert schema css to unix file format
Thu Aug 13 14:00:00 2009 msAATTsuse.de - update schema documentation
Thu Aug 13 14:00:00 2009 msAATTsuse.de - provided new kiwi-tools for sles11 without pigz
Thu Aug 13 14:00:00 2009 msAATTsuse.de - removed pigz from kiwi-tools, it\'s packaged and maintained by Alexander Graf now
Thu Aug 13 14:00:00 2009 msAATTsuse.de - make rpm-force content a boolean value
Wed Aug 12 14:00:00 2009 msAATTsuse.de - fixed waitForStorageDevice() check
Wed Aug 12 14:00:00 2009 msAATTsuse.de - fixed fsck call for clicfs mount
Wed Aug 12 14:00:00 2009 msAATTsuse.de - run fsck and resize2fs only on first boot of a clic mount - don\'t wait for storage device if it\'s a loop
Wed Aug 12 14:00:00 2009 msAATTsuse.de - fixed VMFindSystem function in xenboot (bnc #530200)
Tue Aug 11 14:00:00 2009 msAATTsuse.de - v3.74 - use resize2fs -M if possible ( >= v1.41 )
Tue Aug 11 14:00:00 2009 msAATTsuse.de - fixed bool value in documentation
Tue Aug 11 14:00:00 2009 msAATTsuse.de - fixed foreign addPackage and addArchive calls, make sure the package/archive is added to the bootstrap section not to the image section as we can\'t guarantee that a type=\"image\" section exists - run tagmedia at last
Tue Aug 11 14:00:00 2009 msAATTsuse.de - better text for used xml file
Tue Aug 11 14:00:00 2009 msAATTsuse.de - v3.73 - removed -extra kernel packages for 11.2, don\'t exist anymore - added desktop kernel profile too boot images for 11.2
Tue Aug 11 14:00:00 2009 msAATTsuse.de - fixed getSize function to calculate required inode count for the subsequent mkfs ext2/3/4 call (bnc #528839)
Mon Aug 10 14:00:00 2009 msAATTsuse.de - added ddn function and replace all occurrences of a=$disk\"number\" with a=$(ddn $disk number) (bnc #529580)
Sun Aug 9 14:00:00 2009 adrianAATTsuse.de check for existens of README.BETA file
Sun Aug 9 14:00:00 2009 adrianAATTsuse.de
* Activate ISO creation for product medias by default.
* Add check for medias intended to be a ftp tree only (no iso)
* Do not ignore random errors anymore, but fail !
* cleanup of some return values, still way more to do
Fri Aug 7 14:00:00 2009 msAATTsuse.de - v3.71 - added --select packages for the --info option
Fri Aug 7 14:00:00 2009 msAATTsuse.de - fixed loop between CDMount and searchBIOSBootDevice happening in oem ISO install mode
Fri Aug 7 14:00:00 2009 msAATTsuse.de - added dialog based progress information when restoring the recovery archive files (bnc #510041)
Fri Aug 7 14:00:00 2009 msAATTsuse.de - fixed evaluation of MKCLICFS_COMPRESSION (bnc #528743)
Thu Aug 6 14:00:00 2009 msAATTsuse.de - clear screen after dialog window disappears (bnc #510041)
Thu Aug 6 14:00:00 2009 msAATTsuse.de - v3.70 - fixed HAVE_USB check, usbcore is no longer a module - added edd module to be present in isoboot
Wed Aug 5 14:00:00 2009 msAATTsuse.de - fixed OEM_SYSTEMSIZE evaluation for standard and luks repart
Wed Aug 5 14:00:00 2009 msAATTsuse.de - allow OEM_SYSMTEMSIZE evaluation for OEMRepartLuks
Wed Aug 5 14:00:00 2009 msAATTsuse.de - v3.69 - changed oem-repart to allow oem-systemsize even if no home and no swap partition was requested. by default the entire disk space is used but if a oem-systemsize is set this value will be used and therefore allows to have some space left on the disk - fixed loop cleanup
Wed Aug 5 14:00:00 2009 msAATTsuse.de - wait for process to finish when sending int signal (bnc #525986)
Tue Aug 4 14:00:00 2009 msAATTsuse.de - use dmsetup remove instead of kpartx -d
Tue Aug 4 14:00:00 2009 msAATTsuse.de - add a sleep of one second between kpartx -d and losetup -d
Tue Aug 4 14:00:00 2009 msAATTsuse.de - send signal again after 5 seconds, if the process still exists
Tue Aug 4 14:00:00 2009 msAATTsuse.de - add a sleep of one second between kpartx -d and losetup -d - wait for process to finish when sending interrupt signal (bnc #525986) - added support for hybrid ISO\'s. This feature exists with openSUSE 11.2 or later. In order to use it add the attribute hybrid=\"true\" to your iso type line. If you use the iso on a read/write medium the isoboot code will search for a 0x83 partition used for writing OS data (bnc #496505)
Mon Aug 3 14:00:00 2009 msAATTsuse.de - added mediacheck feature for hybrid iso - use partition not disk to mount hybrid
Mon Aug 3 14:00:00 2009 msAATTsuse.de - v3.68 - added support for hybrid ISO\'s. This feature exists with openSUSE 11.2 or later. In order to use it add the attribute hybrid=\"true\" to your iso type line.
Wed Jul 15 14:00:00 2009 msAATTsuse.de - openssl-certs does not exist on SLE10 changed to openssl
Tue Jul 14 14:00:00 2009 msAATTsuse.de - added openssl-certs to bootstrap section of SLE JeOS and boot image templates to allow use of SLE update repositories
Tue Jul 14 14:00:00 2009 msAATTsuse.de - added openssl-certs to bootstrap section of SLE JeOS templates to allow use of SLE update repositories
Tue Jul 14 14:00:00 2009 msAATTsuse.de - fixed liveCD isolinux entry selection (bnc #521338) - removed required lib * packages from delete sections - be verbose when removing files from the initrd
Sun Jul 5 14:00:00 2009 msAATTsuse.de - v3.62 - fixed combined mount with luks encoded read-write part
Sun Jul 5 14:00:00 2009 msAATTsuse.de - fixed combined mount with luks encoded read-write part
Fri Jul 3 14:00:00 2009 msAATTsuse.de - added basic support for LUKS extension for vmx image type with compressed root filesystem.
Thu Jul 2 14:00:00 2009 msAATTsuse.de - use --passwordbox instead of --inputbox to ask for the luks passphrase
Thu Jul 2 14:00:00 2009 msAATTsuse.de - added basic support for LUKS extension for vmx image type
Wed Jul 1 14:00:00 2009 msAATTsuse.de - v3.61 - prepared KIWIImage to work with luks extension. This is not a complete implementation so far, just a first start (bnc #505782) - fixed inclusion of custom tar archives if the image description provides only a bootstrap section like the isoboot data does
Wed Jun 24 14:00:00 2009 msAATTsuse.de - allow inclusion of custom tar archives with new element. This can be used to include custom branding without special branding packages. This can also be used to include any kind of data without the need for a package (bnc #515573)
Wed Jun 24 14:00:00 2009 msAATTsuse.de - the inode issue comes back to haunt us yet again. The last go around actually made things *worse * for things like vmdk that allocate large disks, since 2x the number of files is probably much smaller than the \'automatic\' calculation used for a disk of that size. The attached patch fixes this by removing the --fs-numinodes option (which is useless, IMHO) and replaces it with --fs-inoderatio. Kiwi will assume 16k for inode ratio if not otherwise specified. We use the ratio to determine the number of inodes, unless it is a smaller value than num_files *2.
Tue Jun 23 14:00:00 2009 msAATTsuse.de - fixed typo
Tue Jun 23 14:00:00 2009 msAATTsuse.de - more virtio modules
Tue Jun 23 14:00:00 2009 msAATTsuse.de - update docs, --list-profiles moved to --info ... --select profiles
Tue Jun 23 14:00:00 2009 msAATTsuse.de - added virtio kernel modules to boot iamges (bnc #515543)
Tue Jun 23 14:00:00 2009 msAATTsuse.de - improved support for obtaining XML information (bnc #513093)
Mon Jun 22 14:00:00 2009 msAATTsuse.de - don\'t remove mkfs/fsck links, just a cleanup fix
Mon Jun 22 14:00:00 2009 msAATTsuse.de - v3.60 - don\'t remove libx *, 11.2 hwinfo is linked against libx86emu
Fri Jun 19 14:00:00 2009 msAATTsuse.de - v3.59 - fixed journal parameter handling in setupEXT2
Fri Jun 19 14:00:00 2009 msAATTsuse.de - fixed clone to search in default image path if source is specified as relative path
Fri Jun 19 14:00:00 2009 msAATTsuse.de - fixed checkType function if flags and filesystem attributes are used together. Using these attributes together in one type is redundant and therefore not correct but it should not lead to an error (bnc #514412) - removed useless setValidateRepositoryType method - add support for xml file logging. This allows to keep track on the temporary changes kiwi makes in the XML description caused by for example commandline options
Fri Jun 19 14:00:00 2009 msAATTsuse.de - fixed clean target
Fri Jun 19 14:00:00 2009 msAATTsuse.de - fixed clean target
Thu Jun 18 14:00:00 2009 msAATTsuse.de - combine manual pages and kiwi cookbook into one
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de - updated documentation files
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de - adding man pages to kiwi.pdf using joinPDF
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de Create pdfs from the man pages and append it to the kiwi.pdf
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de Changed refentrytitle to filename
Wed Jun 17 14:00:00 2009 msAATTsuse.de - fixed clicfs mount for pxe type (bnc #513826)
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de New chapter appendix as intropage for the man-pages
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de Added chapter appendix
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de set tocdepth to 2 to show new subsections and added an appendix chapter
Wed Jun 17 14:00:00 2009 pschinaglAATTsuse.de Added subsections for the elements of config.xml
Tue Jun 16 14:00:00 2009 msAATTsuse.de - v3.58 - added -persist option when calling nbd-client (bnc #513112
Wed Jun 10 14:00:00 2009 msAATTsuse.de - fixed test case
Wed Jun 10 14:00:00 2009 msAATTsuse.de - fixed kernel/initrd links in setupSUSEInitrd (bnc #507261)
Wed Jun 10 14:00:00 2009 msAATTsuse.de - fixed use of mke2fs options
Wed Jun 10 14:00:00 2009 msAATTsuse.de - fixed SLE11 template iso type
Wed Jun 10 14:00:00 2009 msAATTsuse.de - fixed setRepository function so that it does not overwrite repositories marked with status=\"fixed\"
Wed Jun 10 14:00:00 2009 msAATTsuse.de - call searchBIOSBootDevice only on initial deployment if the kiwi initrd is still in place for a subsequent boot use the root variable from the kernel commandline to find the boot disk, related to (bnc #507261)
Tue Jun 9 14:00:00 2009 msAATTsuse.de - added list of available patterns for --list-xmlinfo
Tue Jun 9 14:00:00 2009 msAATTsuse.de - added getSolfile method to be able to access the cached satsolver index file
Tue Jun 9 14:00:00 2009 msAATTsuse.de - fixed url list update when --add-repo is used
Tue Jun 9 14:00:00 2009 msAATTsuse.de - fixed kiwi --list-xmlinfo if repo doesn\'t exist
Tue Jun 9 14:00:00 2009 msAATTsuse.de - fixed typo
Tue Jun 9 14:00:00 2009 msAATTsuse.de - v3.57 - added support for ext4 filesystem, adapt 11.2 examples - adapt 11.2 boot images for ext4
Fri Jun 5 14:00:00 2009 msAATTsuse.de - v3.56 - fixed missing xen bootprofile in vmx and oem (bnc #510276) - added ec2 bootkernel profile for vmx,oem,xen (bnc #510276)
Thu Jun 4 14:00:00 2009 msAATTsuse.de - fixed call of xsl stylesheet in kiwi.pl
Thu Jun 4 14:00:00 2009 msAATTsuse.de - default to \"no\" when the recovery dialog is displayed
Wed Jun 3 14:00:00 2009 msAATTsuse.de - moved schemeversion to schemaversion (bnc #509107)
Tue Jun 2 14:00:00 2009 msAATTsuse.de - moved element into the section added xsl stylesheet for transformation from scheme version 2.4 -> 3.5 according to this change. Always compress cpio images (bnc #509107)
Tue Jun 2 14:00:00 2009 mattAATTsuse.de - Use O_LARGEFILE on the output open call as well
Tue Jun 2 14:00:00 2009 mattAATTsuse.de - Use O_LARGEFILE when opening an image in imagewriter
Mon Jun 1 14:00:00 2009 msAATTsuse.de - fixed documentation for bool value use (bnc #508614)
Sun May 31 14:00:00 2009 msAATTsuse.de - v3.55 - allow use of zypper iso:// URL type in kiwi (bnc #498437)
Fri May 29 14:00:00 2009 mbarringerAATTsuse.de Give the user more feedback when the imagewriter cannot open a file.
Thu May 28 14:00:00 2009 msAATTsuse.de - check for iso tool in KIWIIsoLinux.pm (bnc #478991) - removed redundand relocateCatalog code, use the one from KIWIIsoLinux only
Wed May 27 14:00:00 2009 msAATTsuse.de - v3.54 - added fix catalog function to KIWIIsoLinux.pm (bnc #478991) - set inode count for system partition only, even if it has been specified via --fs-maxinodes (bnc #495135) - fixed OEM recovery, set OEM_RECOVERY to the root device not the recovery device (bnc #503653)
Tue May 26 14:00:00 2009 msAATTsuse.de - fixed oem format=\"iso\" install mode (bnc #506983) - use dialog for asking questions (bnc #503653)
Mon May 25 14:00:00 2009 msAATTsuse.de - added resize_inode feature to filesystem before resizing. This will reserve space so the block group descriptor table may grow in the future (bnc #498683)
Mon May 25 14:00:00 2009 msAATTsuse.de - fixed clicfs mount, regression from my nfs fix
Fri May 22 14:00:00 2009 msAATTsuse.de - don\'t reserve blocks for clicfs without cow (bnc #505580)
Fri May 22 14:00:00 2009 msAATTsuse.de - reset IFS to standard value in CDDevice (bnc #505943)
Fri May 22 14:00:00 2009 msAATTsuse.de - added relocation function to KIWIIsoLinux module
Fri May 22 14:00:00 2009 msAATTsuse.de - rewrote KIWIIsoLinux.pm to allow bit/tri arch boot media the code has not been tested for efi or ikr due to lack of such machines (bnc #478991)
Fri May 22 14:00:00 2009 msAATTsuse.de - fixed typo in volid assignment
Tue May 19 14:00:00 2009 msAATTsuse.de - fixed/changed clicfs over NFS use. When using a clicfs image it\'s required that the clicfs filesystem is mounted on the server and the container (fsdata.ext3) is exported to the client. In that way it\'s consistent with all other filesystem types
Tue May 19 14:00:00 2009 msAATTsuse.de - set default volid for CD/DVD kiwi install media
Tue May 19 14:00:00 2009 msAATTsuse.de - fixed volid setup in case of format=iso setup (bnc #500501)
Tue May 19 14:00:00 2009 msAATTsuse.de - fixed typo
Tue May 19 14:00:00 2009 msAATTsuse.de - fixed volid setup in case of spaces (bnc #500501)
Tue May 19 14:00:00 2009 msAATTsuse.de - fixed doc hint for boot-theme
Tue May 19 14:00:00 2009 msAATTsuse.de - update documentation for bootinclude/bootdelete and boot-theme setup - implement setup
Mon May 18 14:00:00 2009 msAATTsuse.de - v3.52 - fixed clicfs mount over AOE,NBD (bnc #504652) - allow inclusion of boot image packages specified inside the system image description. This feature is used to setup branding packages which needs to be installed as part of the boot image (initrd) (bnc #497888)
Fri May 15 14:00:00 2009 msAATTsuse.de - v3.51 - set keytable to us in template files (bnc #504275) - fixed live iso examples (bnc #504283)
Wed May 13 14:00:00 2009 msAATTsuse.de - fixed group setup with correct group id (bnc #503117)
Wed May 13 14:00:00 2009 msAATTsuse.de - added bugid for spec file fix - copy hidden files to home in oemboot code
Wed May 13 14:00:00 2009 msAATTsuse.de - fixed spec file
Tue May 12 14:00:00 2009 msAATTsuse.de - indentation fix
Tue May 12 14:00:00 2009 msAATTsuse.de - make use of new clicfs options for persistent writes
Tue May 12 14:00:00 2009 msAATTsuse.de - fixed spec file requirement for mkisofs on sle10
Tue May 12 14:00:00 2009 adrianAATTsuse.de ensure that images.sh and config-cdroot.sh have execute permissions as well.
Tue May 12 14:00:00 2009 adrianAATTsuse.de ensure that config.sh can get executed, even when it comes without execute permissions
Fri May 8 14:00:00 2009 msAATTsuse.de - added optional volid setup for iso\'s (bnc #500501) - update scheme documentation from oXygen
Thu May 7 14:00:00 2009 msAATTsuse.de - don\'t set config file when calling modprobe in suseStripKernel function - use 70% of RAM for clicfs
Thu May 7 14:00:00 2009 msAATTsuse.de - validate MKCLICFS_COMPRESSION if set - fixed tool hash for flags=\"clic\" - added free RAM value for clicfs mount instead of fixed size of 470M
Wed May 6 14:00:00 2009 msAATTsuse.de - fixed sap media changer call (bnc #486758) - added more clic fixes, still not finished (bnc #497172) - set inode count for system partition only (bnc #495135) - fixed satsolver setup
Tue May 5 14:00:00 2009 msAATTsuse.de - 3.50 - added bash quotation function (bnc #500537)
Tue May 5 14:00:00 2009 msAATTsuse.de - more clicfs fixes - fixed quotation of home and groups for user setup (bnc #500537) - fixed system reboot if kiwi initrd is still in place
Tue May 5 14:00:00 2009 msAATTsuse.de - v3.49 - added clic fixes from coolo (bnc #497172) - fixed quotation of realname for user setup (bnc #500537) - fixed activateBootPartition code (bnc #500454)
Tue May 5 14:00:00 2009 msAATTsuse.de - fixed quotation of realname for user setup (bnc #500537) - update documentation
Mon May 4 14:00:00 2009 msAATTsuse.de - allow setting up vga for iso images too (bnc #480336)
Mon May 4 14:00:00 2009 msAATTsuse.de - need eval to pass options to the mount call
Mon May 4 14:00:00 2009 msAATTsuse.de - detect if it is required to pass -t iso9660 (bnc #498497)
Mon May 4 14:00:00 2009 msAATTsuse.de - fixed permissions on recovery (bnc #489909)
Mon May 4 14:00:00 2009 msAATTsuse.de - added support for clicfs for suse >= 11.2 (bnc #497172)
* * * not fully implemented and tested yet * * * - don\'t run path generation for iso:// and file:// paths if zypper is used (bnc #498437)
Wed Apr 29 14:00:00 2009 msAATTsuse.de - fixed initrd cpio if xen type is requested (bnc #399230)
Wed Apr 29 14:00:00 2009 msAATTsuse.de - fixed template xorg.conf for 64 bit
Mon Apr 27 14:00:00 2009 msAATTsuse.de - v3.47 - added kernel parameter nombridcheck (bnc #498371) - remove boot/grub/mbrid file from installed system at first deployment to avoid conflicts on reboot - set boot flag after repartitioning the device - exclude install source device from being used as SAP data storage device
Fri Apr 24 14:00:00 2009 msAATTsuse.de - fixed format image creation for split type (bnc #497882) - use -x option when copying system tree to avoid copying still mounted filesystems like proc for example (bnc #497984)
Fri Apr 24 14:00:00 2009 msAATTsuse.de - v3.46 - pass -t iso9660 when mounting CD/DVD devices. It\'s a kernel bug that slows down the bandwidth if not passing that value but the workaround is rock solid :) (bnc #493201)
Thu Apr 23 14:00:00 2009 msAATTsuse.de - prevent usb and storage modules from beeing loaded directly
Thu Apr 23 14:00:00 2009 msAATTsuse.de - don\'t reboot the system after OEMInstall, simply proceed
Thu Apr 23 14:00:00 2009 msAATTsuse.de - fixed kiwi_revision content in .profile - fixed LVM repartition code if more than one VG exist
Wed Apr 22 14:00:00 2009 msAATTsuse.de - deacticate the bios 0x80 check it\'s not safe enough - allow non interactive installation procedure in oem-sap-install mode. In case of multiple disks the smallest one is used for the system (bnc #486758)
Wed Apr 22 14:00:00 2009 msAATTsuse.de - activate volume groups before calling mkinitrd
Wed Apr 22 14:00:00 2009 msAATTsuse.de - restrict packagemanager names to smart and zypper
Wed Apr 22 14:00:00 2009 msAATTsuse.de - fixed filesystem detection if root is on LVM
Mon Apr 20 14:00:00 2009 msAATTsuse.de - make sure DHCPHADDR is an uppercase value (bnc #495557) - fixed probeFileSystem to take care if the first 512byte contains a bootloader (bnc #493489) - fixed multicast activation/deactivation (bnc #356974) - also check for include link to use --dereference when copying the overlay tree (bnc #490128)
Thu Apr 2 14:00:00 2009 msAATTsuse.de - fixed xen config creation for bootprofile=xen and image type vmx
Wed Apr 1 14:00:00 2009 msAATTsuse.de - update man pages (variable names) - leave gawk for oem images
Tue Mar 31 14:00:00 2009 msAATTsuse.de - fixed IFS setup for SAP functions
Tue Mar 31 14:00:00 2009 msAATTsuse.de - fixed typo
Tue Mar 31 14:00:00 2009 msAATTsuse.de - v3.40 - update manual pages. Patch by Peter Schinagl - added functions to run X inside preinit (bnc #486758)
Tue Mar 31 14:00:00 2009 msAATTsuse.de - added SAPDataStorageSetup function (bnc #486758)
Mon Mar 30 14:00:00 2009 msAATTsuse.de - added check functions SAPMemCheck, SAPCPUCheck and SAPStorageCheck. They apply if the oem-sap-install attribute is set for OEM images (bnc #486758)
Mon Mar 30 14:00:00 2009 msAATTsuse.de - leave libcom_err in isoboot
Mon Mar 30 14:00:00 2009 msAATTsuse.de - v3.39 - added a xendomain attribute in config.xml to be able to distinguish whether a virtual disk image should be a Xen dom0 host system or a Xen domU guest system. If no domain is set a dom0 image will be created - added xenServer function to check if we run a Xen host or guest system. The bootloader setup is different for dom0 or domU. Adapt setupBootLoader * functions - allow filesystem resizing to be used in isoboot
Fri Mar 27 13:00:00 2009 msAATTsuse.de - fixed xencons setup for lilo and syslinux
Fri Mar 27 13:00:00 2009 msAATTsuse.de - added support for virtual disk images as Xen guest. This means you can specify vmx|oem and the resulting virtual disk image can boot as Xen guest system. Patch by James Willcox
Fri Mar 27 13:00:00 2009 msAATTsuse.de - v3.38 - added root fstab entry for compressed rootfs (bnc #486017) - fixed console setup when booting into a Xen guest
Thu Mar 26 13:00:00 2009 msAATTsuse.de - really allow oem-reboot to take effect in recovery mode (bnc #487887)
Thu Mar 26 13:00:00 2009 msAATTsuse.de - v3.37 - added squashfs requirement for suse version > 10.1 - fixed solvable creation for repos without compressed meta data (packages and .pat file)
Wed Mar 25 13:00:00 2009 msAATTsuse.de - fixed build
Wed Mar 25 13:00:00 2009 msAATTsuse.de - v3.36 - allow oem-reboot to take effect in recovery mode (bnc #487887) - improved the --list-xmlinfo option which now also prints information about the repositories used for the image and it will print out the install size in kB by using the satsolver. Users can so check how much space is required to build the root tree of the image
Wed Mar 25 13:00:00 2009 msAATTsuse.de - added compuled man pages
Wed Mar 25 13:00:00 2009 msAATTsuse.de - add --dest-dir check when --build runs - fixed checkType function for iso tool check - include xml man page source to git - update template descriptions
Tue Mar 24 13:00:00 2009 msAATTsuse.de - add --dest-dir check when --build runs - update template descriptions
Mon Mar 23 13:00:00 2009 mbarringerAATTsuse.de Checking in change allowing \"-m\" option to maximize the imagewriter window
Mon Mar 23 13:00:00 2009 msAATTsuse.de - removed KIWICollect_local.pm and also the --instsource-local option from the code base. This module is no longer maintained and all code related to this path went into KIWICollect.pm
Mon Mar 23 13:00:00 2009 msAATTsuse.de - better changelog entry for last zypper repo prio fix
Mon Mar 23 13:00:00 2009 msAATTsuse.de - fixed build, KIWICollect_local has been removed
Mon Mar 23 13:00:00 2009 adrianAATTsuse.de obsolete second version of instsource module
Mon Mar 23 13:00:00 2009 msAATTsuse.de - v3.35 - added support for repo priority for zypper
Mon Mar 23 13:00:00 2009 adrianAATTsuse.de add support for repository priorities with zypper
Mon Mar 23 13:00:00 2009 adrianAATTsuse.de add support for priority ordering of repositories
Fri Mar 20 13:00:00 2009 msAATTsuse.de - fixed documentation changed wording from exten(d|t) to unpacked and package image
Thu Mar 19 13:00:00 2009 msAATTsuse.de - really fixed this path handling in upgrade mode
Thu Mar 19 13:00:00 2009 msAATTsuse.de - again fixed build script
Thu Mar 19 13:00:00 2009 msAATTsuse.de - fixed build tools
Thu Mar 19 13:00:00 2009 msAATTsuse.de - added suse-SLE10-JeOS template
Thu Mar 19 13:00:00 2009 msAATTsuse.de - v3.34 - fixed ignore element validation - added suse-SLE10-JeOS template
Tue Mar 17 13:00:00 2009 mbarringerAATTsuse.de Trying to commit the MacOS port again
Tue Mar 17 13:00:00 2009 mbarringerAATTsuse.de Last commit failed for some reason
Tue Mar 17 13:00:00 2009 mbarringerAATTsuse.de Finished the MacOS X port
Tue Mar 17 13:00:00 2009 msAATTsuse.de - added support for arch attribute in pattern names
Tue Mar 17 13:00:00 2009 msAATTsuse.de - v3.33 - removed support for cromfs; dead and unmaintained fs - added bootkernel attribute which allows to select a kernel profile defined in the boot image description
Mon Mar 16 13:00:00 2009 msAATTsuse.de - v3.32 - changed netboot descriptions >= 11.1 to provide diskless kernel profiles named diskless-kdefault and diskless-kpae. The standard diskless profile will no longer include a kernel
Mon Mar 16 13:00:00 2009 msAATTsuse.de - fixed oemboot workflow for dmsquash setup
Mon Mar 16 13:00:00 2009 msAATTsuse.de - fixed oemboot workflow for dmsquash setup
Sun Mar 15 13:00:00 2009 msAATTsuse.de - v3.31 - fixed broken CD/DVD mount path in isoboot workflow - fixed vmxboot workflow for dmsquash setup - fixed oemboot workflow for dmsquash setup - fixed usbboot workflow for dmsquash setup
Thu Mar 12 13:00:00 2009 msAATTsuse.de - v3.30 - added warning message before installing system (bnc #484793)
Thu Mar 12 13:00:00 2009 msAATTsuse.de - v3.29 - added cdrkit-cdrtools-compat required for kiwi-desc-oemboot - added experimental support for dmsquash filesystem type which is a squashfs filesystem containing an ext3 filesystem. The mount of the data happens via a device-mapper snapshot and allows copy-on-write access (bnc #483444) - fixed install image size calculation in case of a compressed image. gzip -l was used but we ran into the >4GB bug mentioned in the gzip manpage (bnc #484247)
Tue Mar 10 13:00:00 2009 msAATTsuse.de - v3.28 - added crc-t10dif kernel module for 11.2 boot - added x-bit to vmware .vmx file generated by kiwi - don\'t use arch specific glibc in boot images - don\'t specify cracklib but remove all possibly installed versions in boot images
Mon Mar 9 13:00:00 2009 msAATTsuse.de - fixed build helper tools according to svn -> git switch
