|
|
 |
|
|
Changelog for python-billiard-doc-3.5.0.5-27.1.noarch.rpm :
Thu Dec 6 13:00:00 2018 Tomáš Chvátal
- Fix the build again
- Fix the fdupes call
- Update version to 3.5.0.5:
* Various small bugfixes all around
Tue Dec 4 13:00:00 2018 Matej Cepl
- Remove superfluous devel dependency for noarch package
Mon Jun 26 14:00:00 2017 benoit.moninAATTgmx.fr
- update to version 3.5.0.2:
* max_memory_per_child was measured in kilobytes on Linux, but
bytes on
*BSD/MacOS, it\'s now always kilobytes.
* Windows: Adds support for max_memory_per_child, but requires
the psutil package to be installed.
* Fixed bug in ForkingPickler.loadbuf, where it tried to pass
a BytesIO instance directly to ``pickle.loads`` on Python 2.7.
- additional changes from version 3.5.0.1:
* Connection: Properly handle EINTR (Issue #191).
* Fixed bug with missing CreateProcess for Windows on Python 2.7.
* Adds Process._counter for compatibility with Python <3.5.
- additional changes from version 3.5.0.0:
* No longer supports Python 2.6
You need Python 2.7 or later to use this version of billiard.
* Merged changes from CPython 3.5
- convert the package to singlespec and import changes from
python3-billiard
- change the source URL to pythonhosted.org
- update the BuildRequires for test:
* remove mock, nose and unittest2
* add case and pytest
- split the documentation to a separate package
- remove the shebang cleanup: not needed anymore
Wed Jan 13 13:00:00 2016 antoine.belvireAATTlaposte.net
- Update to version 3.3.0.22:
* Wheel packages for Windows now available.
- Changes from 3.3.0.21:
* Pool: Fixed semaphore error on Python3.
* Fixed libSystem error on OS X El Capitan.
Sat Apr 25 14:00:00 2015 benoit.moninAATTgmx.fr
- update to version 3.3.0.20:
* Pool: Timeouts will attempt to send SIGKILL, but this signal
does not exist on Windows. Replaced with SIGTERM.
- additional changes from version 3.3.0.19:
* Pool: Exceptions in user timeout callbacks are now logged
instead of crashing the pool. Contributed by Pierre Fersing.
* Pool: Exit codes in errors were improperly being represented
as signals.
* Pool: ``.map``. and ``.imap`` now working again.
* Now builds on FreeBSD 10. Contributed by Michael Fladischer.
- update project URL
- add fdupes as BuildRequires and call it after install
- remove BuildRequires python-nose-cover3, not needed by the tests
anymore
- set a minimum version for python-nose
- remove unwanted shebang of funtests/setup.py
- add -fno-strict-aliasing to CFLAGS to avoid potential breakage
Fri Aug 15 14:00:00 2014 mciharAATTsuse.cz
- Update to 3.3.0.18
- see https://pypi.python.org/pypi/billiard for complete changelog
Sun Dec 1 13:00:00 2013 oliver.bengsAATTopensuse.org
- Update to version 3.3.0.8:
+ Now also sets ``multiprocessing.current_process`` for compatibility
with loggings ``processName`` field
Wed Nov 13 13:00:00 2013 p.drouandAATTgmail.com
- Update to version 3.3.0.6
+ Now works without C extension again.
+ New ``_billiard.read(fd, buffer, [len, ])` function
implements os.read with buffer support (new buffer API)
+ New pure-python implementation of ``Connection.send_offset``.
- Changes from 3.3.0.5
+ All platforms except for Windows/PyPy/Jython now requires the C extension.
- Changes from 3.3.0.4
+ Fixed problem with Python3 and setblocking.
- Changes from 3.3.0.3
+ Now works on Windows again.
- Changes from 3.3.0.2
+ ApplyResult.terminate() may be set to signify that the job
must not be executed. It can be used in combination with
Pool.terminate_job.
+ Pipe/_SimpleQueue: Now supports rnonblock/wnonblock arguments
to set the read or write end of the pipe to be nonblocking.
+ Pool: Log message included exception info but exception happened
in another process so the resulting traceback was wrong.
+ Pool: Worker process can now prepare results before they are sent
back to the main process (using ``Worker.prepare_result``).
- Changes from 3.3.0.1
+ Pool: New ``correlation_id`` argument to ``apply_async`` can be
used to set a related id for the ``ApplyResult`` object returned:
>>> r = pool.apply_async(target, args, kwargs, correlation_id=\'foo\')
>>> r.correlation_id
\'foo\'
+ Pool: New callback `on_process_exit` is called when a pool
process exits, with signature ``(pid, exitcode)``.
+ Pool: Improved the too many restarts detection.
- Changes from 3.3.0.0
+ Dual code base now runs on Python 2.6+ and Python 3.
+ No longer compatible with Python 2.5
+ Includes many changes from multiprocessing in 3.4.
+ Now uses ``time.monotonic`` when available, also including
fallback implementations for Linux and OS X.
+ No longer cleans up after receiving SIGILL, SIGSEGV or SIGFPE
+ ``Finalize`` and ``register_after_fork`` is now aliases to multiprocessing.
It\'s better to import these from multiprocessing directly now
so that there aren\'t multiple registries.
+ New `billiard.queues._SimpleQueue` that does not use semaphores.
+ Pool: Can now be extended to support using multiple IPC queues.
+ Pool: Can now use async I/O to write to pool IPC queues.
+ Pool: New ``Worker.on_loop_stop`` handler can be used to add actions
at pool worker process shutdown.
Note that, like all finalization handlers, there is no guarantee that
this will be executed.
Thu Oct 24 14:00:00 2013 speilickeAATTsuse.com
- Require python-setuptools instead of distribute (upstreams merged)
Wed Sep 25 14:00:00 2013 p.drouandAATTgmail.com
- Update to version 2.7.3.32
+ Fixed compatibility with Python 3.3
+ Process boostrap: Now ignores errors while flushing stdout (Issue #16)
- Changes from version 2.7.3.31
+ Recent changes broke support for running without C extension (Issue #57)
- Changes from version 2.7.3.30
+ Fixed ImportError in billiard._ext
- Changes from version 2.7.3.29
+ Compilation: Fixed improper handling of HAVE_SEM_OPEN (Issue #55)
+ Process now releases logging locks after fork.
+ Pool.terminate_job now ignores No such process errors.
+ billiard.Pool entrypoint did not support new arguments to billiard.pool.Pool
+ Connection inbound buffer size increased from 1kb to 128kb.
+ C extension cleaned up by properly adding a namespace to symbols.
+_exit_function now works even if thread wakes up after gc collect.
Fri Jun 28 14:00:00 2013 speilickeAATTsuse.com
- Update to version 2.7.3.28:
+ Pool: Fixed regression that disabled the deadlock fix in 2.7.3.24
+ Pool: RestartFreqExceeded could be raised prematurely.
+ Process: Include pid in startup and process INFO logs.
- Changes from version 2.7.3.27:
+ Manager now works again.
+ Python 3 fixes for billiard.connection.
+ Fixed invalid argument bug when running on Python 3.3
+ Ignore OSError when setting up signal handlers.
- Changes from version 2.7.3.26:
+ Pool: Child processes must ignore SIGINT.
- Changes from version 2.7.3.25:
+ Pool: 2.7.3.24 broke support for subprocesses (Issue #48).
- Changes from version 2.7.3.24:
+ Pool: Make sure finally blocks are called when process exits due to a signal.
+ Pool: Can now use GDB to debug pool child processes.
+ Fixes Python 3 compatibility problems.
Fri Mar 22 13:00:00 2013 alexandreAATTexatati.com.br
- Update to 2.7.3.23:
- Windows: Now catches SystemExit from setuptools while trying to
build the C extension (Issue #41).
- Aditional changes from 2.7.3.22:
- Pool: apply_async now supports a callbacks_propagate keyword
argument that can be a tuple of exceptions to propagate in
callbacks. (callback, errback, accept_callback, timeout_callback).
- Errors are no longer logged for OK and recycle exit codes.
This would cause normal maxtasksperchild recycled process
to log an error.
- Fixed Python 2.5 compatibility problem (Issue #33).
- FreeBSD: Compilation now disables semaphores if Python was built
without it (Issue #40).
Contributed by William Grzybowski
- Aditional changes from 2.7.3.21:
- Fixed typo EX_REUSE -> EX_RECYCLE
- Code now conforms to new pep8.py rules.
- Aditional changes from 2.7.3.20:
- Pool: Disable restart limit if maxR is not set.
- Pool: Now uses os.kill instead of signal.signal.
Contributed by Lukasz Langa
- Fixed name error in process.py
- Pool: ApplyResult.get now properly raises exceptions.
Fix contributed by xentac.
Fri Jan 25 13:00:00 2013 jfunkAATTfunktronics.ca
- Update to 2.7.3.19:
* Fixes problem at shutdown when gc has collected symbols.
* Pool now always uses _kill for Py2.5 compatibility on Windows (Issue
[#32]).
* Fixes Python 3 compatibility issues
Tue Nov 13 13:00:00 2012 jfunkAATTfunktronics.ca
- Update to 2.7.3.18:
* [Pool] Fix for check_timeouts if not set.
Fix contributed by Dmitry Sukhov
* Fixed pickle problem with Traceback.
Code.frame.__loader__ is now ignored as it may be set to an unpickleable
object.
* The Django old-layout warning was always showing.
2.7.3.17 - 2012-09-26
* Fixes typo
2.7.3.16 - 2012-09-26
* Windows: Fixes for SemLock._rebuild (Issue #24).
* Pool: Job terminated with terminate_job now raises
billiard.exceptions.Terminated.
2.7.3.15 - 2012-09-21
* Windows: Fixes unpickling of SemLock when using fallback.
* Windows: Fixes installation when no C compiler.
2.7.3.14 - 2012-09-20
* Installation now works again for Python 3.
2.7.3.13 - 2012-09-14
* Merged with Python trunk (many authors, many fixes: see Python changelog
in trunk).
* Using execv now also works with older Django projects using setup_environ
(Issue #10).
* Billiard now installs with a warning that the C extension could not be
built if a compiler is not installed or the build fails in some other way.
It really is recommended to have the C extension installed when running
with force execv, but this change also makes it easier to install.
* Pool: Hard timeouts now sends KILL shortly after TERM so that C extensions
cannot block the signal.
Python signal handlers are called in the interpreter, so they cannot be
called while a C extension is blocking the interpreter from running.
* Now uses a timeout value for Thread.join that doesn\'t exceed the maximum
on some platforms.
* Fixed bug in the SemLock fallback used when C extensions not installed.
Fix contributed by Mher Movsisyan.
* Pool: Now sets a Process.index attribute for every process in the pool.
This number will always be between 0 and concurrency-1, and can be used
to e.g. create a logfile for each process in the pool without creating a
new logfile whenever a process is replaced.
2.7.3.12 - 2012-08-05
* Fixed Python 2.5 compatibility issue.
* New Pool.terminate_job(pid) to terminate a job without raising
WorkerLostError
2.7.3.11 - 2012-08-01
* Adds support for FreeBSD 7+
Fix contributed by koobs.
* Pool: New argument allow_restart is now required to enable the pool
process sentinel that is required to restart the pool.
It\'s disabled by default, which reduces the number of file descriptors/
semaphores required to run the pool.
* Pool: Now emits a warning if a worker process exited with error-code.
But not if the error code is 155, which is now returned if the worker
process was recycled (maxtasksperchild).
* Python 3 compatibility fixes.
* Python 2.5 compatibility fixes.
2.7.3.10 - 2012-06-26
* The TimeLimitExceeded exception string representation only included the
seconds as a number, it now gives a more human friendly description.
* Fixed typo in LaxBoundedSemaphore.shrink.
* Pool: ResultHandler.handle_event no longer requires any arguments.
* setup.py bdist now works
2.7.3.9 - 2012-06-03
* Environment variable MP_MAIN_FILE envvar is now set to the path of the
__main__ module when execv is enabled.
* Pool: Errors occurring in the TaskHandler are now reported.
2.7.3.8 - 2012-06-01
* Can now be installed on Py 3.2
* Issue #12091: simplify ApplyResult and MapResult with threading.Event
Patch by Charles-Francois Natali
* Pool: Support running without TimeoutHandler thread.
* The with_
*_thread arguments has also been replaced with a single
threads=True argument.
* Two new pool callbacks:
* on_timeout_set(job, soft, hard)
Applied when a task is executed with a timeout.
* on_timeout_cancel(job)
Applied when a timeout is cancelled (the job completed)
Wed May 23 14:00:00 2012 jfunkAATTfunktronics.ca
- Update to 2.7.3.7
* Fixes Python 2.5 support.
- 2.7.3.6 - 2012-05-21
* Pool: Can now be used in an event loop, without starting the supporting
threads (TimeoutHandler still not supported)
* Pool: Process too frequent restart protection now only counts if the
process had a non-successful exitcode.
* Pool: New options max_restart + max_restart_freq
* Pool: The ``WorkerLostError`` message now includes the exitcode of the
process that disappeared.
- Build HTML docs
Thu May 17 14:00:00 2012 jfunkAATTfunktronics.ca
- Update to 2.7.3.5
* Now always cleans up after sys.exc_info() to avoid cyclic references.
* ExceptionInfo without arguments now defaults to sys.exc_info.
* Forking can now be disabled using the MULTIPROCESSING_FORKING_DISABLE
environment variable.
Also this envvar is set so that the behavior is inherited after execv.
* The semaphore cleanup process started when execv is used now sets a useful
process name if the setproctitle module is installed.
* Sets the FORKED_BY_MULTIPROCESSING environment variable if forking is
disabled.
Fri Apr 27 14:00:00 2012 jfunkAATTfunktronics.ca
- Update to 2.7.3.4
* Added billiard.ensure_multiprocessing() - Raises NotImplementedError if
the platform does not support multiprocessing (e.g. Jython).
Wed Apr 25 14:00:00 2012 jfunkAATTfunktronics.ca
- Generate new spec
- Update to 2.7.3.3
* PyPy now falls back to using its internal _multiprocessing module, so
everything works except for forking_enable(False) (which silently degrades)
* Fixed Python 2.5 compat issues.
* Uses more with statements
* Merged some of the changes from the Python 3 branch.
- 2.7.3.2 - 2012-04-20
* Now installs on PyPy/Jython (but does not work).
- 2.7.3.1 - 2012-04-20
* Python 2.5 support added.
- 2.7.3.0 - 2012-04-20
* Updated from Python 2.7.3
* Python 2.4 support removed, now only supports 2.5, 2.6 and 2.7. (may
consider py3k support at some point).
* Pool improvments from Celery.
* no-execv patch added (http://bugs.python.org/issue8713)
Fri Nov 25 13:00:00 2011 jfunkAATTfunktronics.ca
- Update to 0.3.1
* Fixed broken bool evaluation in supervisor. Thanks to jonozzz
The bug originated from a ``a if x else b`` vs. ``x and a or bz``
confusion when porting code to Python 2.4.
* ``ApplyResult._set`` can\'t delete the result if it\'s not been accepted.
This also means ``ApplyResult._ack`` needs to delete the result if the job
has been marked ready.
- 0.3.0
* Added support for accept callbacks.
- 0.2.3
* Python 2.4 support.
Wed Apr 14 14:00:00 2010 jfunkAATTfunktronics.ca
- Initial import
|
|
|
