Changelog for shorewall-5.2.2-224.3.noarch.rpm :

* Sun Feb 03 2019 Bruno Friedmann - Update to new 5.2.2 bugfix release http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.2/releasenotes.txt- Packaging: + As seen with upstream recommend running shorewall update on all version update + to be done: run update automatically
* Fri Jan 04 2019 Bruno Friedmann - Update to major version 5.2.1.4 A lot of changes occurs since last package please consult http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.1/releasenotes.txt and the know problem list at http://www.shorewall.net/pub/shorewall/5.2/shorewall-5.2.1/known_problems.txt- Update your configuration shorewall update- Packaging: renew spec file with spec-cleaner
* Sun Apr 15 2018 brunoAATTioda-net.ch- Changes in 5.1.12.3 Problems Corrected: When \'reset\' and \'dst\' were specified to the IfEvent action, the action would incorrectly attempt to reset the event for the SOURCE IP address rather than the DEST address. That has been corrected.
* Mon Mar 05 2018 brunoAATTioda-net.ch- spec : + Minimal changes with spec-cleaner + Stop conflicting with other firewall (SuSEFirewall2, firewalld) User can have several management tools, and it help preparing a migration- Run shorewall(6) update -A to update your configurations Check and adapt them before restarting.- Changes in 5.1.12.3 + Update release documents. + Ensure that mutex gets released at exit.- Changes in 5.1.12.2 + Alter documentation to prefer \';;\' over \';\' in INLINE and IP[6]TABLES rules. + Make \'update\' convert \';\' to \';;\' in INLINE, IPTABLES and IP6TABLES rules. + Correct typo that resulted in an \"unknown function\" Perl diagnostic. + Correct \"Invalid policy\" message. + Fix omitted SYN limiting.- Changes in 5.1.12.1 + Replace macro.SSDPServer with corrected macro.SSDPserver.- Changes in 5.1.12 Final + Update release documents. + Add INLINE_MATCHES=Yes to the deprecated list.- Changes in 5.1.12 RC 1 + Update release documents. + Minor performance enhancements to Optimize Category 8. + Always report IPSET_MATCH.- Changes in 5.1.12 Beta 2 + Delete undocumented OPTIMIZE_USE_FIRST option. + Merge 5.1.11. + Suppress trailing whitespace. + Avoid awkward blank lines.- Changes in 5.1.12 Beta 1 + Code and manpage cleanup. + Allow SNAT in the INPUT chain.- Changes in 5.1.11 Final + Update release documents.- Changes in 5.1.11 RC 1 + Update versions and copyrights. + Clear the connection mark on forwarded IPSEC tunneled connections + Make TRACK_PROVIDERS=Yes the default.- Changes in 5.1.11 Beta 2 + Be selective about verification of the conntrack utility when + DYNAMIC_BLACKLIST=ipset,disconnect... + Don\'t require shorewall to be started for \'allow\' with ipset-based DBL. + Make address variables play nice with the \'clear\' command. + Don\'t unconditionally enable forwarding during \'clear\'.- Changes in 5.1.11 Beta 1 + Allow non-root to run some \'show\' commands. + Use synchain name in log messages rather than base chain name. + Assume :syn for TCP CT entries in the conntrack file and HELPER. + Limit depth of \'find\' search when AUTOMAKE=Yes.- Changes in 5.1.10.2 + Limit \'find\' to depth 1. + Don\'t run find in an empty entry in $CONFIG_PATH- Changes in 5.1.10.1 + Fix Shorewall-core installer for sandbox case. + Make /etc and /configfiles the same.- Changes in 5.1.10 Final + Add warning re wildcard and OPTIONS. + Correct IPv6 Universal interfaces file.- Changes in 5.1.10 RC 1 + Correct ingress policing. + Fix Shorewall-init recompilation problem.- Changes in 5.1.10 Beta 2 + Allow a protocol to be associated with a regular action. + Remove the PSH flag from the FIN action.- Changes in 5.1.10 Beta 1 + Allow CONFIG_PATH setting to begin with \':\' to allow dropping the first directory by non-root. + Correct several typos in the manpages (Roberto Sánchez). + Correct typo in \'dump\' processing. + Reset all table counters during \'reset\'.- Changes in 5.1.9 Final + Use logical interface names in the Sample configs.- Changes in 5.1.9 RC 1 + Apply W Van den Akker\'s OpenWRT/Lede patches. + Don\'t verify IP and SHOREWALL_SHELL paths when compiling for export. + Support for Redfish remote console in macro.IPMI- Changes in 5.1.9 Beta 2 + Merge content from 5.1.8.- Changes in 5.1.9 Beta 1 + Update release documents. + Add TCPMSS action in the mangle file. + Inline the Broadcast action when ADDRTYPE match is available. + Support logging in the snat file. + Add shorewall-logging(5).- Changes in 5.1.8 Final + Correct \'delete_default_routes()\'. + Delete default routes from \'main\' when a fallback provider is successfully enabled. + Don\'t restore default route when a fallback provider is enabled. + Issue a warning when \'persistent\' is used with RESTORE_DEFAULT_ROUTE=Yes. + Don\'t dump SPD entries for the other address family. + Fix \'persistent\' provider issues. + Treat LOG_TARGET the same as all other capabilities. + Allow merging of rules with IPSEC policies
* Sun Nov 12 2017 brunoAATTioda-net.ch- spec : + use new %_fillupdir macro with env DIRFILLUP in build
* Redone patches
*-fillup-install.patch to use ${DIRFILLUP}
* use new %_fillupdir macro in files + change require perl to perl-base + Added conflict with firewalld + Refresh list of files and modules- Run shorewall(6) update -A to update your configurations Check and adapt them before restarting.- 5.1.8.1 release - Recommended action : + Update release documents + Make persistent routes and rules independent of \'autosrc\' + Correct \'delete_default_routes()\' + Delete default routes from \'main\' when a fallback provider is successfully enabled + Don\'t restore default route when a fallback provider is enabled + Issue a warning when \'persistent\' is used with RESTORE_DEFAULT_ROUTE=Yes + Don\'t dump SPD entries for the other address family + Fix \'persistent\' provider issues + Treat LOG_TARGET the same as all other capabilities + Allow merging of rules with IPSEC policies- 5.1.7.2 release Please refer to releasenote.txt for a detailled description. As always use shorewall [-6] update and revise your configuration + Features summary
* Module loading streamlined, shorewall [-6] update will remove MODULE_SUFFIX configuration
* Check route if detect is used in gateway column (dhcpd5 has now binary encoded .lease)
* DNAT and REDIRECT support in ShorewallActions
* Docker configuration support: DOCKER-INGRESS chain. + Fixes summary
* Fix shorewall-snat(5) man page example, DEST column has to be read eth0:+myset[dst]
* Fix invalid vlsm to ipcalc message
* ADD_IP_ALIASES is set to NO for ipv6 while yes for ipv4
* Cleanup .tmp in save ipset operations.
* Command reenable fix for persistent and non-persistent interfaces
* Warn if getattr failed (SeLinux)- 5.1.6 release + Fixes summary
* $SHAREDIR $CONFIGDIR available again
* Fix compilation with optimize level 8
* Be consistant with Netfilter interpretation of \'eth\'=\'eth+\'
* RESTORE_WAIT_OPTION serialize start of ipv4/ipv6 with -w option
* RDP macros handle also UDP part + Features summary
* Sparse option (not implemented in our spec)
* Add enable / disable runtime extension script
* Check zone and subzone to share at least one interface
* Runtime address and port variables
* Iptables --wait option used for serialization
* Tue Aug 15 2017 brunoAATTioda-net.ch- Update to bugfix release 5.1.5.2 + Make build reproducible boo#1047218 + Fix upgrade from 4x version : dropBcast and dropBcasts are now supported boo#1053650 + Perl 5.26 support + Fix for BASIC_FILTERS=Yes and tcfilters + Fix USER/GROUP messages + MAC address in OUTPUT col in accounting file error is raised at compile time + Fix port number 0 or > 65535 perl execption
* Sat Aug 12 2017 olafAATTaepfle.de- Update filename in /var/adm/update-messages to match documentation, and build-compare pattern
* Wed Jul 12 2017 brunoAATTioda-net.ch- bugfix release 5.1.4.4 A defect in 5.1.4.3 caused a startup failure when two or more \'fallback\' providers were configured. That has been corrected.
* Thu Jun 29 2017 alarrosaAATTsuse.com- Fix a typo in %posttrans that would remove the wrong file and could cause a problem depending on the execution order of the %pretrans and %posttrans scripts for the shorewall and shorewall6 packages.
* Wed Jun 21 2017 brunoAATTioda-net.ch- This stable branch 5.1x will be the new default for Leap 42.3. Remember that each time you have an upgrade with changes in Major or Major,Minor it is mandatory you upgrade your configuration with shorewall(6) update -a /etc/shorewall(6) command.- Packaging : use pretrans and posttrans to inform user about configuration upgrade.- Bugfix release 5.1.4.3. Problem Corrected: When running on prior-generation distributions such as RHEL6, IPv6 multi-ISP configurations failed to start due to an error such as the following: ERROR: Command \"ip -6 -6 route replace default scope global table 250 nexthop via ::192.88.99.1 dev tun6to4 weight 1\" Failed Such configurations now start successfully.
* Wed Jun 14 2017 brunoAATTioda-net.ch- Bugfix and enhancement release 5.1.4.2 complete changelog is available http://shorewall.net/pub/shorewall/5.1/shorewall-5.1.4/releasenotes.txt- Main changes All IPv6 standard actions have been deleted and their logic has been added to their IPv4 counterparts who can now handle both address families. Previously, ?error and ?require messages as well as verbose ?info and ?warning messages (those that report the file and line numbers) generated from an action file would report the action file name and line number rather than the file and line number where the action was invoked. The file and line number where the action was invoked were listed second. Beginning with this release, the invoking file and line number are listed first and the action file and line number are not reported. This allows for creation of clearer messages. IPv6 UPnP support (including MINIUPNPD) is now available. A PERL_HASH_SEED option has been added to allow the Perl hash seed to be specified. See shorewall.conf(5) and perlsec(1) for details.
* Sat Mar 25 2017 brunoAATTioda-net.ch- Bugfix release 5.1.3.2 Previously, if a Shorewall Variable (e.g., AATTchain) was the target of a conditional ?RESET directive (one that was enclosed in ?if. ?else...?endif logic), the compiler could incorrectly use an existing chain created from the action rather than creating a new (and different) chain. That has been corrected. Previously, if alternate input format specified a column that had already been specified, the contents of that column were silently overwritten. Now, a warning message is issued stating that the prior value has been replaced by the newer value.
* Sun Mar 19 2017 brunoAATTioda-net.ch- Update to last bugfix version 5.1.3.1 Problems Corrected: There was a typo in the BLACKLIST_DEFAULT settings in the 5.1.3 sample config files, which resulted in a compilation error. That typo has been corrected. There was also a typo in the two-interface IPv4 sample snat file; 192.168.0.0/16 was inadvertently entered as 92.168.0.0/16. That has been corrected. Previously, when processing the policy file, \'all+\' was incorrectly treated the same as \'all\'. That has been corrected so that \'all+\' causes intra-zone traffic to be included in the policy.
* Wed Mar 15 2017 brunoAATTioda-net.ch- Upgrade to last stable 5.1.3 For details see changelog.txt and releasenotes.txt containing all informations for a correct upgrade path.- Packaging Redone patches for var-fillup + shorewall-fillup-install.patch + shorewall-init-fillup-install.patch + shorewall-lite-fillup-install.patch
* Sun Feb 12 2017 brunoAATTioda-net.ch- Upgrade to stable 5.1.1 For details see changelog.txt and releasenotes.txt containing all informations for a correct upgrade path.- Packaging: + use proper %{} syntax + Adjust year copyright + Remove attr on sbindir symlink + Move Samples and Contrib to doc package
* Wed Dec 07 2016 brunoAATTioda-net.ch- Upgrade to last stable of 5.0.x version 5.0.15 For details see changelog.txt and releasenotes.txt containing all informations for a correct upgrade path.- Packaging : + Remove all non suse %if + Cleanup older non supported version + Remove upstream merged patch
* 0001-remote_fs.patch
* 0001-required-stop-fix.patch + Remove 0001-fillup-install.patch replaced by specific product patch for correct usage of var-fillup + Added patches for var-fillup when not specific %name6 is also supported
* shorewall-fillup-install.patch
* shorewall-init-fillup-install.patch
* shorewall-lite-fillup-install.patch + spec-cleaner minimal
* Sun Mar 06 2016 brunoAATTioda-net.ch- Update to last 4x bugfix version 4.6.13.4 For details see changelog.txt and releasenotes.txt - 4.6.13.4
* This release includes a couple of additional configure/install fixes from Matt Darfeuille.
* The DROP command was previously rejected in the mangle file. That has been corrected. - 4.6.13.3
* Previously, Shorewall6 rejected rules in which the SOURCE contained both an interface name and a MAC address (in Shorewall format). That defect has been corrected so that such rules are now accepted.
* A number of corrections have been made to the install, uninstall and configure scripts (Matt Darfeuille).
* Previously, optional interfaces were not enabled during \'start\' and \'restart\' unless there was at least one entry in the \'providers\' file. This resulted in these interfaces not appearing in the output of \'shorewall[6] status -i\'.
* The check for use of a circular kernel log buffer (as opposed to a log file) has been improved.
* Previously, if a circular log buffer was being used, the output of various commands still displayed \'/var/log/messages\' as the log file. Now, it is displayed as \'logread\'.
* When processing the \'dump\' command, the CLI now uses \'netstat\' to print socket information when the \'ss\' utility is not installed. - 4.6.13.2
* Previously, if statistical load balancing was used in the providers file, the default route in the main table was not deleted during firewall start/restart. That route is now correctly deleted. - 4.6.13.1
* Previously, the \'reset\' command would fail if chain names were included. Now, the command succeeds, provided that all of the specified chains exist in the filter table.
* The TCP meta-connection is now supported by the Tinc macro and tunnel type. Previously, only the UDP data connection was supported.
* Tue Sep 15 2015 toganmAATTopensuse.org- Update to version 4.6.13 For more details see changelog.txt and realeasenotes.txt
* The \'rules\' file manpages have been corrected regarding the packets that are processed by rules in the NEW section.
* Parsing of IPv6 address ranges has been corrected. Previously, use of ranges resulted in \'Invalid IPv6 Address\' errors.
* The shorewall6-hosts man page has been corrected to show the proper contents of the HOST(S) column.
* Previously, INLINE statements in the mangle file were not recognized if a chain designator (:F, :P, etc.) followingowed INLINE(...). As a consequence, additional matches following a semicolon were interpreted as column/value pairs unless INLINE_MATCHES=Yes, resulting in compilation failure.
* Inline matches on IP[6]TABLE rules could be ignored if INLINE_MATCHES=No. They are now recognized.
* Specifying an action with a logging level in one of the _DEFAULT options in shorewall[6].conf (e.g., REJECT_DEFAULT=Reject:info) produced a compilation error: ERROR: Invalid value (:info) for first Reject parameter /usr/share/shorewall/action.Rejectect (line 52) That has been corrected. Note, however, that specifying logging with a default action tends to defeat one of the main purposes of default actions which is to suppress logging.
* Previously, it was necessary to set TC_EXPERT=Yes to have full access to the user mark in fw marks. That has been corrected so that any place that a mark or mask can be specified, both the TC mark and the User mark are accessible.
* Tue Jul 14 2015 toganmAATTopensuse.org- Update to version 4.6.11 For more details see changelog.txt and releasenotes.txt
* Previously, when the -c option was given to the \'compile\' command, the progress message \"Compiling...\" was issued before it was determined if compilation was necessary. Now, that message is suppressed when re-compilation is not required.
* Previously, when the -c option was given to the \'compile\' command, the \'postcompile\' extension script was executed even when there was no (re-)compilation. Now, the \'postcompile\' script is only invoked when a new script is generated.
* If CONFDIR was other than /etc, then ordinary users would not receive a clear error message when they attempted to execute one of the commands that change the firewall state.
* Previously, IPv4 DHCP client broadcasts were blocked by the \'rpfilter\' interface option. That has been corrected.
* The \'update\' command incorrectly added the INLINE_MATCHES option to shorewall6.conf with a default value of \'Yes\'. This caused \'start\' to fail with invalid ip6tables rules when the alternate input format using \';\' is used. Note: This last issue is not documented in the release notes included with the release.
* Wed Jun 17 2015 toganmAATTopensuse.org- Update to version 4.6.10.1 For more details see changelog.txt and releasenotes.txt
* Indentation is now consistent in lib.core (Tuomo Soini).
* The first problem corrected in 4.6.10 below was incomplete. It is now complete (Tuomo Soini).
* Similarly, the second fix was also incomplete and is now completed (Tuomo Soini).
* Thu May 07 2015 toganmAATTopensuse.org- Update to version 4.6.9 For more details see changelog.txt and releasenotes.txt
* This release contains defect repair from Shorewall 4.6.8.1 and earlier releases.
* The means for preventing loading of helper modules has been clarified in the documentation.
* The SetEvent and ResetEvent actions previously set/reset the event even if the packet did not match the other specified columns. This has been corrected.
* Previously, the \'show capabilities\' command was ignoring the HELPERS setting. This resulted in unwanted modules being autoloaded and, when the -f option was given, an incorrect capabilities file was generated.
* Previously, when \'wait\' was specified for an interface, the generated script erroneously checked for required interfaces on all commands rather than just start, restart and restore.
* Tue Apr 14 2015 toganmAATTopensuse.org- Update to version 4.6.8.1 For more details see changnlog.txt and releasenotes.txt
* Previously, when servicd was installed and there were one or more required interfaces, the firewall would fail to start at boot.This has been corrected by Tuomo Soini.
* Some startup logic in lib.cli has been deleted. A bug prevented the code from working as intended, so there is no loss of functionality resulting from deletion of the code.
* Sat Apr 04 2015 toganmAATTopensuse.org- Update to version 4.6.8 For more details see changelog.txt and releasenotes.txt
* This release includes defect repair from Shorewall 4.6.6.2 and earlier releases.
* Previously, when the -n option was specified and NetworkManager was installed on the target system, the Shorewall-init installer would still create ${DESTDIR}etc/NetworkManager/dispatcher.d/01-shorewall, regardless of the setting of $CONFDIR. That has been corrected such that the directory ${DESTDIR}${CONFDIR}/NetworkManager/dispatcher.d/01-shorewall is created instead.
* Previously, handling of the IPTABLES and IP6TABLES actions in the conntrack file was broken. nfw provided a fix on IRC.
* The Shorewall-core and Shorewall6 installers would previously report incorrectly that the product release was not installed. Matt Darfeuille provided fixes.
* Fri Mar 13 2015 toganmAATTopensuse.org- Update to version 4.6.7 For more details see changelog.txt and releasenotes.txt
* This release includes defect repair from Shorewall 4.6.6.2 and earlier releases.
* The \'tunnels\' file now supports \'tinc\' tunnels.
* Previously, the SAME action in the mangle file had a fixed timeout of 300 seconds (5 minutes). That action now allows specification of a different timeout.
* It is now possible to add or delete addresses from an ipset with entries in the mangle file. The ADD and DEL actions have the same behavior in the mangle file as they do in the rules file.- Added systemd_version macro in anticipation of detecting the correct service file when systemd version is >= 214
* Sat Feb 07 2015 toganmAATTopensuse.org- Update to version 4.6.6.2 For more details see changelog.txt and releasenotes.txt
* The compiler failed to parse the construct +[n] where n is an integer (e.g., +bad[2]).
* Orion Paplawski has provided a patch that adds \'ko.xz\' to the default MODULE_SUFFIX setting. This change deals with recent Fedora releases where the module names now end with \".ko.xz\". In addition to Orion\'s patch, the sample configurations have been modified to specify MODULE_SUFFIX=\"ko ko.xz\".
* Sat Jan 24 2015 toganmAATTopensuse.org- Update to version 4.6.6.1 For more details see changelog.txt and releasenotes.txt
* Previously the SAVE and RESTORE actions were erroneously disallowed in the INPUT chain within the mangle file.
* The manpage descriptions of the mangle SAVE and RESTORE actions incorrectly required a slash (/) prior to the mask value.
* Race conditions could previously occur between the \'start\' command and the \'enable\' and \'disable\' commands.
* The \'update\' command incorrectly added the INLINE_MATCHES option to shorewall.conf with a default value of \'Yes\'. This caused \'start\' to fail with invalid iptables rules when the alternate input format using \';\' is used.
* Previously the LOCKFILE setting was not propagated to the generated script. So when the script was run directly, the script unconditionally used ${VARDIR}/lock.
* Sat Jan 17 2015 toganmAATTopensuse.org- Update to version 4.6.6 For more details see changlelog.txt and releasenotes.txt As there are many new features with this release please consult the mentioned files.
* Previously, a line beginning with \'shell\' was interpreted as a shell script. Now, the line must begin with \'SHELL\' (case-sensitive). Note that ?SHELL and BEGIN SHELL are still case-insensitive.
* Mon Jan 12 2015 toganmAATTopensuse.org- Update to version 4.6.5.5 For more details see changelog.txt and releasenotes.txt
* This release adds Tuomo Soini\'s fix for Shorewall-init to 4.6.5.5. Previously, the ifupdown scripts were looking in the wrong directory for the firewall script.
* Sat Jan 10 2015 toganmAATTopensuse.org- Update to version 4.6.5.4 For more details see changelog.txt and releasenotes.txt
* The \'-c\' option of the \'dump\' and \'show routing\' commands is now documented.
* The handling of the \'DIGEST\' environmental variable has been corrected in the Shorewall installer. Previously, specifying that option would not correctly update the Chains module which led to a Perl compilation failure.
* Handling of ipset names in PORT columns has been corrected. Previously, such usage resulted in an invalid iptables rule being generated.
* Thu Dec 18 2014 toganmAATTopensuse.org- Update to version 4.6.5.3 For more details see changelog.txt and releasenotes.txt
* The Shorewall-init scripts were using the incorrect variable to set the state directory. Correction provided by Roberto Sanchez.
* For normal dynamic zones, the \'add\' command failed with a diagnostic such as: ERROR: Zone ast, interface net0 does not have a dynamic host list
* When a mark range was used in the marks (tcrules) file, a run-time error occurred while attempting to load the generated ruleset.
* Thu Dec 11 2014 dimstarAATTopensuse.org- Do not buildrequire openSUSE-release: it\'s a daily changing package and causes thus frequent rebuilds for no reason. configure and install both try to guess the target from /etc/os-release. So we simply inject BUILD=suse for the openSUSE case.
* Sun Nov 23 2014 toganmAATTopensuse.org- Update to version 4.6.5.2 For more details see changelog.txt and releasenotes.txt
* LOG_BACKEND=LOG failed at run-time for all but the most recent kernels.- Changes in 4.6.5.1
* The generated script can now detect an gateway address assigned by later versions of that program (Alan Barrett).
* In 4.6.5, the bash-based configure script would issue the following diagnostic if SERVICEDIR was not specified in the shorewallrc file: ./configure: line 199: [SERVICEDIR]=: command not found This was compounded by the fact that all of the released shorewallrc files still specified SYSTEMDDIR rather than SERVICEDIR (Evangelos Foutras)
* The shorewallrc.archlinux file now reflects a change in SBINDIR that occurred in Arch Linux in mid 2013 (Evangelos Foutras).
* Wed Nov 05 2014 toganmAATTopensuse.org- Update to versioin 4.6.4.3 For more details see changelog.txt and releasenotes.txt
* The fix for LOG_BACKEND in 4.6.4.2 worked on some older distributions but not on newer ones. This release fixes the problem in the remaining cases.