Changelog for hamlib-devel-4.0_git20190206-20.2.x86_64.rpm :

* Thu Feb 07 2019 dl8fclAATTdarc.de- update to version 4.0_git20190206 Reduce verbosity in FLRig Ensure buf is zeroed in kenwood_safe_transaction to avoid return random data Reduce verbosity of rig_strrmode and read_string Improve error handling in network_flush when disconnect happens Reduce verbosity of rig_strvfo netrigctl can now do vfo mode -- has automatic detection of rigctld vfo mode Fix memset in kenwood.c
* Mon Feb 04 2019 dl8fclAATTdarc.de- update to version 4.0_git20190204 Remove unnecessary delays from TS-990 and TS-2000 back ends
* Wed Jan 30 2019 dl8fclAATTdarc.de- update to version 4.0_git20190129 Add FT847UNI for early serial number units that are one-way comm
* Thu Jan 24 2019 dl8fclAATTdarc.de- update to version 4.0_git20190123 New model Kenwood TH-D74 fix buffer lengths to avoid gcc8 warnings
* Tue Jan 22 2019 dl8fclAATTdarc.de- update to version 4.0_git20190121 New utility \'rigctlcom\' to allow non-hamlib-aware programs to use hamlib rigs via COM ports. Add TUNER on/off function for Yaesu rigs.
* Fri Jan 11 2019 dl8fclAATTdarc.de- update to version 4.0_git20190111 Fix kenwood BC BC2 return
* Wed Jan 09 2019 dl8fclAATTdarc.de- update to version 3.3
* Tue May 30 2017 dl8fclAATTdarc.de- update to version 3.2_git20170530 Initial controls for the rs-hfiq sdr Do not set DTR/RTS on dedicated PTT port if it is already closed
* Tue May 30 2017 dl8fclAATTdarc.de- update to version 3.2_git20170523 Fixes for kenwood backends Stop rigctld and rotctld crashing when service threads cannot write to clients New rotator model: SPID MD-01/02 in ROT2 mode fixed reading the rig\'s return value in newcat_get_tx_vfo
* Thu May 11 2017 dl8fclAATTdarc.de- update to version 3.2_git20170511 Icom IC-R10 & 20 move to beta
* Fri Apr 07 2017 dl8fclAATTdarc.de- update to version 3.2_git20170406 New model: Icom IC-R6 Allow RIG_LEVEL_STRENGTH queries over the network link
* Sun Mar 05 2017 dl8fclAATTdarc.de- update to version 3.2_git20170227 Fix a state machine defect with repeated PTT reset calls Add Dorji DRA818 modules (VHF and UHF variants)
* Sun Feb 19 2017 dl8fclAATTdarc.de- update to version 3.2_git20170219 Fix some endian issues in the si570/AVR SDR back ends Added x108g backend Fix FT-891 recognition Breakout FT-1000D file for full support Fix DIG MODE for FT817-ND Add support for AGC Levels
* Sat Jan 28 2017 dl8fclAATTdarc.de- update to version 3.2_git20170127 Added HPSDR backend Fix ic785x default addr to 0x8e Clears potential garbage data in read buffer prior to command being sent Updated PiHPSDR backend defaults Use Windows ioctlsocket to avoid buffer overrun Add get and set split functions for the TS450S Simplify and fix defects in the FT991 back end Added HPSDR backend
* Sat Jan 07 2017 dl8fclAATTdarc.de- update to version 3.2_git20170107 Fix ft991_get_mode New models: IC-7849/IC-7851, FT-891
* Sun Dec 25 2016 dl8fclAATTt-online.de- update to version 3.2_git20161225 Fix typos Corrected a few bugs and rebased from Ervin\'s (HA2OS) pull request. Added new example to Python demo script (set/get float type level) Added Lua binding and demo script Adds test for ID 907 for the Flex 6300 python-binding and lua-binding enabled
* Sat Nov 19 2016 dl8fclAATTt-online.de- update to version 3.1_git20161119 Move K3 DT0 before mode switch, add version info to electraft rig open, WSJT-X VOX rig split now works
* Tue Nov 08 2016 dl8fclAATTt-online.de- update to version 3.1_git20161106 New Perseus model Fixed buffer overflow in rigctl_parse and rotctl_parse Changed some modules to LGPL in lieu of GPL Change the IC7600 & IC7800 set/get mode to versions that support DATA… fix set_vfo behavior of TS2000 fix NET rigctl
* Mon Sep 05 2016 dl8fclAATTt-online.de- update to version 3.1_git20160904 xg3: fix buffer overflow Fix issue with TS-570S|D open in rig_caps Release the serial port used for PTT when possible
* Sat Aug 27 2016 dl8fclAATTt-online.de- update to version 3.1_git20160827 Fix an issue presenting on the Yaesu FT-450(D) Fix issue with TS-570S|D open in rig_caps Updated smeter calibration for ic7300
* Sun Jun 12 2016 dl8fclAATTt-online.de- update to version 3.1_git20160611 implemented set_conf, get_conf and Token fast_set_commands for max throughput Yaesu Fast Set Commands (High throughput for commands) added send_morse and civ_version to ic7100/ic7600 added get/set_conf for FT1200, FT2000, FT450, FT5000 and FT9000 Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300 Changes for IC-7300 and IC-7200
* Mon May 23 2016 dl8fclAATTt-online.de- update to version 3.1_git20160521 Do not attempt to query AI state on several Kenwood rigs Add some functionality to the tmd710 Add send_morse to icom rigs Do not crash if expected CTCSS tones not sepcified Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode a… Initial support for the IC-7300
* Mon Apr 04 2016 dl8fclAATTt-online.de- update to version 3.1_git20160402 Added support for Icom IC-2730 Use rig state rig port retry option rather than from capabilities Use a sensible port timeout value for the Kenwood TS-850 Make sure right band is used when setting frequency on IC-910(H) VFO targetable get frequency operation for the Icom IC-910(h) Better set frequency semantics for the IC-910(h) Do not swap VFO unnecessarily Elide unnecessary CAT commands when setting split frequency and mode Add {get,set}_splitfrequency_mode for the IC-910(H) Implement rig_{set,get}_split_freq_mode() for IC-756 series. Initial implementation of rig_{set,get}_split_freq_mode() for FT-857. Implement combined split VFO frequency and mode setting. Fixed get_vfo for FT-757GX(II) Allow the ft757gx to work with WSJT-X Add 23cms to IC-910(H) backend Improve IPv6 portability and consistency Various Yaesu updates Add get_freq to FRG-100 Favor $HOME over \'~\' in text Fix a logic error in band detection during IC-910 set frequency Merge branch \'ic910-set-freq\' of git://git.code.sf.net/u/bsomervi/hamlib
* Sat Jan 16 2016 dl8fclAATTt-online.de- update to version 3.1_git20160115 Fix possible frequency overflow on Kenwood and Yaesu Install daemon man files to man1 New Prosistel rotor backend from IZ7CRX Fix missing PKTUSB mode setting code for FT-817 & FT-897
* Fri Dec 11 2015 dl8fclAATTdarc.de- update to version 3.1_git20151207 Fix FT-817/857/897 issues and add some missing functionality Use correct function to execute set type commands with no response Add a new command line option \'--no-restore-ai\' (\'-n\') to rigctl Allow for poor emulations of Kenwood rigs that have no ID command Attempt to restore AI status on exit Proper IPv6 and dual stack networking
* Sun Nov 22 2015 dl8fclAATTt-online.de- update to version 3.1_git20151122 Remove unecessary delays from TS-940S backend
* Mon Nov 09 2015 dl8fclAATTdarc.de- update to version 3.1_git20151109 change command validation for Yaesu set commands
* Sun Sep 20 2015 dl8fclAATTdarc.de- update to version 3.1_git20150920 fix kenwood_set_mode for ts590s and mode CW, RTTY or AM
* Thu Sep 03 2015 dl8fclAATTdarc.de- update to version 3.0_git20150903 Add library paths for tests
* Sat Aug 22 2015 dl8fclAATTdarc.de- update to version 3.0_git20150822 New CNCTRK rotor backend
* Mon Aug 17 2015 dl8fclAATTdarc.de- update to version 3.0_git20150815 Fixes power level reporting for the Omni VII. Backend is promoted to STABLE status. Fixes S meter reporting for FT857 and FT991. Fixes rig split for FT991. Working now for WSJT-X rig split mode.
* Mon Jul 27 2015 dl8fclAATTdarc.de- update to version 3.0_git20150727 Allows the FT-991 to work with Fake Split in WSJT-X
* Fri Jul 17 2015 dl8fclAATTdarc.de- update to version 3.0_git20150717 Fix for Yaesu FT-991
* Fri Jul 03 2015 dl8fclAATTdarc.de- update to version 3.0_git20150703 Omni VII patch for WSJT-X
* Sat May 23 2015 dl8fclAATTdarc.de- update to version 3.0_git20150523 Omni VII set VFO_CURR correctly
* Sun Apr 26 2015 dl8fclAATTdarc.de- update to version 3.0_git20150425 - beta version with a lot of new features and new rig backends