SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG

 
 
Changelog for containerd-0.2.9+gitr706_06b9cb351610-lp150.4.1.x86_64.rpm :

* Thu Feb 01 2018 roAATTsuse.de- do not build on s390, only on s390x (no go on s390)
* Wed Dec 27 2017 dimstarAATTopensuse.org- Fix build with RPM 4.14: exclude is not meant for files to NOT be packaged, but should only be used if the files are to be excluded from a glob when they end up in a different package. Rather remove the unwanted files in the install section.
* Mon Dec 11 2017 asaraiAATTsuse.com- Update to containerdAATT06b9cb35161009dcb7123345749fef02f7cea8e0, which is requried by Docker 17.09.1_ce.
* Thu Nov 23 2017 rbrownAATTsuse.com- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)
* Thu Oct 26 2017 asaraiAATTsuse.com- Set --start-timeout=2m by default to match upstream. bsc#1064926
* Thu Oct 26 2017 asaraiAATTsuse.com- Use the upstream makefile so that Docker can get the commit ID in `docker info`. This also will avoid possible future warnings being spit out like bsc#1065109 and boo#1053532.- Backport https://github.com/containerd/containerd/pull/1686, which is required for the above fix. bsc#1065109 boo#1053532 + bsc1065109-0001-makefile-add-support-for-build_flags.patch
* Wed Oct 18 2017 asaraiAATTsuse.com- Update to containerdAATT3addd840653146c90a254301d6c3a663c7fd6429, which is required by Docker 17.07.0_ce (this commit is effectively v0.2.9 with a few bugfixes missing).
* Thu Aug 03 2017 asaraiAATTsuse.com- Use -buildmode=pie for tests and binary build. bsc#1048046 bsc#1051429
* Thu Jul 06 2017 thippAATTsuse.de- change dependency to docker-runc
* Thu May 04 2017 jmassaguerplaAATTsuse.com- fix golang requirement to 1.7 for the subpackages
* Tue May 02 2017 jmassaguerplaAATTsuse.com- fix golang requirement to 1.7
* Fri Apr 28 2017 jengelhAATTinai.de- Replace %__-type macro indirections
* Thu Apr 13 2017 jmassaguerplaAATTsuse.com- update containerd to the commit version needed for docker-v17.04.0-ce (bsc#1034053) fix bsc#1032769: containerd spurious messages filling journal
* Wed Apr 12 2017 jmassaguerplaAATTsuse.com- make sure this package is being built with go 1.7
* Wed Apr 12 2017 jmassaguerplaAATTsuse.com- remove the go_arches macro because we are using go1.7 which is available in all archs
* Wed Apr 12 2017 asaraiAATTsuse.com- Set TasksMax=infinity to make sure runC doesn\'t start failing randomly.
* Fri Feb 24 2017 jmassaguerplaAATTsuse.com- update to docker 1.13.0 requirement
* Sat Jan 14 2017 asaraiAATTsuse.com- Update docker to the version used in Docker 1.12.6. This is necessary to fix CVE-2016-9962 (bsc#1012568).
* Mon Dec 19 2016 jmassaguerplaAATTsuse.com- update containerd to the version used in docker 1.12.5 (bsc#1016307). This fixes bsc#1015661
* Thu Nov 24 2016 jmassaguerplaAATTsuse.com- fix runc version fix bsc#1009961
* Thu Nov 24 2016 jmassaguerplaAATTsuse.com- fix version so that it contains a sequence number and zypper does not think is a downgrade
* Tue Oct 25 2016 jmassaguerplaAATTsuse.com- fix bsc#1006368: docker/containerd is broken when installed by SuSE Studio in an appliance: We were missing the Requires(post): %fillup_prereq
* Tue Oct 25 2016 jmassaguerplaAATTsuse.com- update runc requirement to 02f8fa7863dd3f82909a73e2061897828460d52f (see RUNC_COMMIT in Dockerfile)
* Thu Oct 13 2016 jmassaguerplaAATTsuse.com- update to commit 0366d7e which is the one required for docker-1.12.2 (bsc#1004490)
* Mon Sep 19 2016 jmassaguerplaAATTsuse.com- fix go_arches definition: use global instead of define, otherwise it fails to build
* Thu Aug 25 2016 jmassaguerplaAATTsuse.com- Remove GOPATH at the end of the GOPATH assignment cause GOPATH is empty and if we do that, we get the path \"\" appended, which causes gcc6-go to complain
* Wed Aug 24 2016 jmassaguerplaAATTsuse.com- add go_arches in project configuration: this way, we can use the same spec file but decide in the project configuration if to use gc-go or gcc-go for some archs.
* Mon Aug 22 2016 jmassaguerplaAATTsuse.com- update to v2.3.0 (bsc#995058)- Remove patches which were already merged upstream:
* socket-activation-01-vendor.patch
* socket-activation-02-daemon.patch
* socket-activation-03-ctr.patch
* Thu Aug 18 2016 jmassaguerplaAATTsuse.com- use gcc6-go instead of gcc5-go (bsc#988408)- build ppc64le with gc-go because this version builds with gc-go 1.6
* Thu Aug 18 2016 cbraunerAATTsuse.com- bump git commit id to the one required by docker v1.12.0- run test during build- only run tests on architectures that provide the go list and got test tools- add aarch64 to go arches
* Thu Aug 18 2016 cbraunerAATTsuse.de- Add containerd-test package which contains the source code and the test. This package will be used to run the integration tests.- Simplify package build and check sections: Instead of symlinking we default to cp -avr. go list gets confused by symlinks hence, we need to copy the source code anyway if we want to run unit tests during package build at some point.
* Tue Aug 16 2016 asaraiAATTsuse.com
* Explicitly state the version dependency for runC, to avoid potential issues with incompatible component versions. These must be updated
* each time we do a release
*. Unfortunately we cannot create a hard dependency because that would conflict with Docker, and was a mistake on upstream\'s part. bsc#993847
* Wed Jul 20 2016 asaraiAATTsuse.com
* Set --runtime option specifically to runC. bsc#978260
* Fri Jun 17 2016 asaraiAATTsuse.de
* Update to containerd v0.2.2. (bsc#989566 FATE#320763)
* Includes updates to the out-of-tree patches.
* Mon May 02 2016 asaraiAATTsuse.de
* Remove MountFlags=slave from containerd.service. This causes many issues with interactions with Docker.
* Fri Apr 29 2016 asaraiAATTsuse.de
* Added /usr/sbin/rccontainerd symlink as per suse-missing-rclink.
* Updated socket activation patches to use the same patchset that was merged upstream (https://github.com/docker/containerd/pull/178):
* socket-activation-01-vendor.patch
* socket-activation-02-daemon.patch
* socket-activation-03-ctr.patch
* Removed aarch64 that was patched upstream: - fix-aarch64-epoll.patch
* Update containerd to 0.2.1. Upstream changelog:
* Fixes for cgroup memory updates and process labeling.
* Truncate the event log on disk and in memory so that it does not grow forever. This is mainly used for higher levels to receive past events if they miss any.
* Tue Apr 19 2016 asaraiAATTsuse.de
* Use the gc compiler for aarch64 builds.
* Add a patch to fix the new aarch64 build support, which has not yet been merged upstream (https://github.com/docker/containerd/pull/195): + fix-aarch64-epoll.patch
* Rebase the socket activation patchset which has yet to be merged (https://github.com/docker/containerd/pull/178):
* socket-activation-01-vendor.patch
* socket-activation-02-daemon.patch
* socket-activation-03-ctr.patch
* Update to containerd 0.2.0. Changelog: + Add Limit to PidsStats + Add timeout flag for container start times. + Add timeout option for GRPC connection. + Add no_pivot_root support. + Add runtimeArgs to pass to shim
* Move epoll syscall to a separate package so we can build on aarch64.
* Fix ctr termios restoration isssues.
* Several bug fixes. - Remove dependencies on larger packages.
* Thu Mar 31 2016 asaraiAATTsuse.de
* Use socket activation with the containerd-daemon. This requires a not-yet-upstream patchset (https://github.com/docker/containerd/pull/178): + socket-activation-01-vendor.patch + socket-activation-02-daemon.patch + socket-activation-03-ctr.patch
* Remove MountFlags=slave since it\'s not relevant to containerd and might cause issues in the future.
* Update to containerd 0.1.0. This required quite a few fixes.
* Sun Mar 27 2016 asaraiAATTsuse.de
* Add initial packaging of containerd 0.0.5.
* Add service and sysconfig files.
* Separately package the client from the server.
* Install to /usr/sbin.
 
ICM