Changelog for yast2-storage-ng-4.2.113-lp152.2.6.1.i586.rpm :

* Thu Aug 06 2020 Ancor Gonzalez Sosa - AutoinstProposal now properly reports the proposal as failed when it fails to find the disks (bsc#1174469)- 4.2.113
* Wed Aug 05 2020 Ancor Gonzalez Sosa - Proposal: fixed detection of shadowed subvolumes for roles using separate LVM volume groups for each filesystem (bsc#1174475).- 4.2.112
* Fri Jul 03 2020 José Iván López González - AutoYaST: delegate to initial guided proposal when no partitions are defined in the profile (bsc#1173610).- AutoYaST: fix enable_snapshots option.- 4.2.111
* Tue Jun 30 2020 aschnellAATTsuse.com- install nvme-cli if NVMe devices are present (bsc#1172866)- 4.2.110
* Tue May 12 2020 Ancor Gonzalez Sosa - Partitioner: fixed a crash when libstorage-ng fails to report the block device of an LVM PV, which is a consequence of a wrong multipath setup (bsc#1170216).- 4.2.109
* Fri Apr 17 2020 Ancor Gonzalez Sosa - Proposal: in the initial attempt, consider only a reasonable number of disks (bsc#1154070).- Proposal: speed up the initial attempt when \"allocate_volume_mode\" is set to \"device\" in the control file (part of jsc#SLE-7238).- 4.2.108
* Mon Apr 06 2020 aschnellAATTsuse.com- allow to disable LUKS activation (bsc#1162545)- 4.2.107
* Fri Apr 03 2020 Ancor Gonzalez Sosa - Partitioner: fixed a crash when some devices are modified both before and after reprobing the hardware (bsc#1168325).- 4.2.106
* Wed Apr 01 2020 Ancor Gonzalez Sosa - Never add the _netdev option to fstab for the root mount point (bsc#1165937).- 4.2.105
* Fri Mar 27 2020 Ancor Gonzalez Sosa - Reverted the changes done to support the calculation of udev links from yast2-bootloader, since the changes in that module were also reverted. See previous entries for versions 4.2.90 and 4.2.102.- Related to bsc#1167779, bsc#1166096 and bsc#1151075.- 4.2.104
* Thu Mar 26 2020 aschnellAATTsuse.com- Reanimate saving USED_FS_LIST (bsc#1161533).- 4.2.103
* Wed Mar 25 2020 Ancor Gonzalez Sosa - Extend and improve the API to get udev names for a block device (needed for bsc#1166096).- 4.2.102
* Mon Mar 23 2020 David Diaz - Prevents to put /boot in a bcache (bsc#1165903).- 4.2.101
* Fri Mar 20 2020 Imobach Gonzalez Sosa - AutoYaST: show an error when no suitable components are found for Bcache, Btrfs multi-devices filesystems, and RAID devices (bsc#1167053).- 4.2.100
* Thu Mar 19 2020 Ancor Gonzalez Sosa - Partitioner: do not allow to clone a partition table to another device with a different block size (bsc#1166363)- 4.2.99
* Wed Mar 18 2020 Ancor Gonzalez Sosa - Restricted the scenarios in which software-defined RAIDs are eligible as target devices for the proposal. Do it only in systems with EFI (bsc#1166258).- 4.2.98
* Fri Mar 13 2020 Steffen Winterfeldt - write nocow attribute correctly into YAML- 4.2.97
* Thu Mar 12 2020 Imobach Gonzalez Sosa - AutoYaST: report the user when conflicting attributes are set in a partition section (i.e., mount, raid_name, lvm_group, btrfs_name, bcache_backing_for and bcache_caching_for) (bsc#1165907).- 4.2.96
* Wed Mar 11 2020 Ancor Gonzalez Sosa - Usability improvements when asking the user to install packages during the probing phase (related to bsc#1140040).- More flexible API for PackageHandler and related classes- More libstorage-ng \"storage features\" now recognized and handled if needed: UF_DASD, UF_BITLOCKER, UF_JFS, UF_F2FS, UF_EXFAT.- Partitioner: better error reporting when the installation of needed packages fails.- 4.2.95
* Mon Mar 09 2020 Imobach Gonzalez Sosa - AutoYaST: show an error when no suitable physical volumes are found for a given volume group (bsc#1162043).- AutoYaST: do not append a suffix to LVM Volume Group names unless it is needed (bsc#1115749).- 4.2.94
* Thu Mar 05 2020 José Iván López González - Fix unit tests for the progress dialog added in version 4.2.82 (related to bsc#1135366).- 4.2.93
* Tue Mar 03 2020 Imobach Gonzalez Sosa - AutoYaST: export the \'disklabel\' attribute for software RAID devices.- AutoYaST: include a \'partitions\' section when exporting an unpartitioned software RAID which is not used as a filesystem (bsc#1159201).- 4.2.92
* Fri Feb 28 2020 José Iván López González - Partitioner: allow to select APQNs when encrypting with pervasive encryption (jsc#SLE-7376).- 4.2.91
* Thu Feb 20 2020 José Iván López González - Add API methods to get preferred mount by option and the associated device path.- 4.2.90
* Thu Feb 20 2020 aschnellAATTsuse.com- allow to install packages needed for probing- 4.2.89
* Wed Feb 19 2020 Ancor Gonzalez Sosa - Proposal: fixed the infinite loop when trying to create a new partition out of the candidate devices (related to bsc#1161331 and bsc#1161678).- 4.2.88
* Tue Feb 18 2020 José Iván López González - Partitioner: do no show button for editing devices when the device cannot be used as block device (bsc#1163597).- Revert changes from 4.2.85.- 4.2.87
* Tue Feb 18 2020 Ancor Gonzalez Sosa - Initial Guided Proposal: place the boot-related partitions in the device choosen for root, even if it\'s a software RAID (bsc#1161331, bsc#1161678).- 4.2.86
* Tue Feb 18 2020 José Iván López González - Partitioner: do not allow to edit a device when the device cannot be used as block device (bsc#1163597).- 4.2.85
* Wed Feb 12 2020 aschnellAATTsuse.com- added texts for RAID1C3 and RAID1C4 as required by gh#openSUSE/libstorage-ng#706 (related to jsc#SLE-3877)- 4.2.84
* Wed Feb 05 2020 David Diaz - Partitioner: usability improved by remembering the last active tab and selected device per page (bsc#1159883).- 4.2.83
* Tue Feb 04 2020 José Iván López González - Partitioner: add a new progress dialog instead of simply closing when applying the changes in a running system (bsc#1135366).- 4.2.82
* Fri Jan 31 2020 Ancor Gonzalez Sosa - Partitioner: the button to delete all partitions does no longer fail for devices containing logical partitions (bsc#1162290).- 4.2.81
* Wed Jan 29 2020 Christopher Hofmann - Added package requirement for UF_PLAIN_ENCRYPTION (bsc#1160773)- 4.2.80
* Tue Jan 28 2020 aschnellAATTsuse.com- also mask swap units in mask-systemd-units (bsc#1152545)- 4.2.79
* Fri Jan 24 2020 aschnellAATTsuse.com- reduce min height of dialogs (bsc#1161651)- drop noatime, acl and xattr options in \"Fstab Options\" dialog (bsc#1135723)- change mount by method to combobox in \"Fstab Options\" dialog (bsc#1135723)- 4.2.78
* Thu Jan 23 2020 Ancor Gonzalez Sosa - Avoided crash when libstorage-ng provides a non-UTF string as partition id (bsc#1161442).- 4.2.77
* Tue Jan 21 2020 aschnellAATTsuse.com- added warning before resizing block devices which were probed empty (related to bsc#1159318)- 4.2.76
* Tue Jan 21 2020 Ancor Gonzalez Sosa - Guided Setup: enforced a consistent width for both password fields (bsc#1161202)- 4.2.75
* Fri Jan 17 2020 David Diaz - Partitioner: make it possible to directly work with devices from the overview/system page (related to fate#318196).- 4.2.74
* Thu Jan 16 2020 José Iván López González - Improve integration with yast2-nfs-client.- Related bugs: bsc#1006815, bsc#1151426.- 4.2.73
* Wed Jan 15 2020 aschnellAATTsuse.com- treat partitions with BitLocker as Windows (related to bsc#1159318)- 4.2.72
* Tue Jan 14 2020 aschnellAATTsuse.com- use udevadm in /usr/bin instead of /sbin (bsc#1160890)- use absolute paths in mask-systemd-units- 4.2.71
* Tue Jan 14 2020 aschnellAATTsuse.com- do not allow block sizes bigger than the system page size when creating xfs (bsc#1111668)- check inode size depending on block size when creating xfs- 4.2.70
* Thu Jan 09 2020 aschnellAATTsuse.com- disallow to mount BitLocker (related to bsc#1159318)- 4.2.69
* Tue Jan 07 2020 José Iván López González - Use partition id names defined by libstorage-ng.- 4.2.68
* Mon Dec 23 2019 aschnellAATTsuse.com- Improved sorting by device name and size in tables (bsc#1140018)- 4.2.67
* Fri Dec 20 2019 Ancor Gonzalez Sosa - Fixed an error when applying fallback_max_size_lvm in some corner cases (bsc#1075990).- 4.2.66
* Thu Dec 19 2019 Imobach Gonzalez Sosa - AutoYaST: use the multipath device when the \'device\' element points to one of its wires (bsc#1159081).- 4.2.65
* Tue Dec 17 2019 Josef Reidinger - Wrap long details message when error happens (bsc#1085468)- 4.2.64
* Fri Dec 13 2019 Ancor Gonzalez Sosa - Improved support for Raspberry Pi in the Guided Proposal: now it also works without preexisting firmware partition (jsc#SLE-7298)- 4.2.63
* Wed Dec 11 2019 José Iván López González - Show device name when activating a LUKS device (related to bsc#1125774).- 4.2.62
* Tue Dec 10 2019 José Iván López González - Generate encryption names according to the mount point of the encryption device (bsc#1125774).- 4.2.61
* Wed Dec 04 2019 José Iván López González - Improve detection of Windows systems (related to bsc#1135341).- 4.2.60
* Wed Nov 27 2019 Christopher Hofmann - Set passno to 2 for the ESP (bsc#1135523)- 4.2.59
* Mon Nov 25 2019 José Iván López González - Detect root mount point probed as inactive (e.g., as result of a snapshot rollback without rebooting the system).- Related to bsc#1124581.- 4.2.58
* Thu Nov 21 2019 Ancor Gonzalez Sosa - Fixed a wrong check that was preventing the installation of some needed packages (bsc#1151148).- 4.2.57
* Thu Nov 14 2019 Ancor Gonzalez Sosa - Propagate the noauto, nofail and _netdev options from fstab to crypttab (needed for jsc#SLE-7687).- Add the _netdev option to fstab for mount points on top of a network-based device like iSCSI or FCoE (jsc#SLE-7687).- 4.2.56
* Tue Nov 12 2019 Imobach Gonzalez Sosa - AutoYaST: allow to inject settings for the guided proposal (related to boo#1156539).- 4.2.55
* Wed Nov 06 2019 Imobach Gonzalez Sosa - AutoYaST: do not repeat filesystem related information when cloning multidevice Btrfs filesystems (bsc#1148578).- AutoYaST: do not export the enable_snapshots element for drives which do not contain the root filesystem.- 4.2.54
* Wed Oct 30 2019 Imobach Gonzalez Sosa - AutoYaST: add support to set the encryption method (related to jsc#SLE-7376).- 4.2.53
* Mon Oct 28 2019 aschnellAATTsuse.com- fix creation of secure key for new partitions (bsc#1154267)- 4.2.52
* Wed Oct 23 2019 Imobach Gonzalez Sosa - AutoYaST: consider CT_DMMULTIPATH an alias of CT_DISK (related to bsc#1130988).- 4.2.51
* Fri Oct 18 2019 Imobach Gonzalez Sosa - Fix translation of some encryption related widgets (bsc#1154364).- 4.2.50
* Fri Oct 18 2019 Imobach Gonzalez Sosa - Avoid false warning about booting from LUKS2 in s390 (related to jsc#SLE-7376).
* Wed Oct 16 2019 Ancor Gonzalez Sosa - If a given device cannot be mounted by the method configured as default, try to find the most stable alternative instead of just using the device kernel name (bsc#1151075).- Improved support for volatile encryption (related to jsc#SLE-7376).- Partitioner: more accurate mount_by options in Fstab Options.- 4.2.49
* Wed Oct 16 2019 Imobach Gonzalez Sosa - Set sector size to 4k for encrypted devices which underlying device is, at least, 4k too (jsc#SLE-7376).- 4.2.48
* Fri Oct 11 2019 aschnellAATTsuse.com- Added translation for new enum value RB_PASSWORD_REQUIRED (bsc#1153871).- 4.2.47
* Fri Oct 04 2019 Ancor Gonzalez Sosa - AutoYaST: do not include the uuid field in the sections when cloning a system (bsc#1148477, bsc#1152535).- 4.2.46
* Thu Oct 03 2019 Ancor Gonzalez Sosa - AutoYaST: do not fail if the uuid is specified for a new filesystem (bsc#1148477, bsc#1152535).- AutoYaST: partitions and logical volumes to be reused can now be found by uuid (bsc#1148477, bsc#1152535).
* Wed Oct 02 2019 David Diaz - Partitioner: fix the type column value for Ext3/4 filesystems with an external journal (bsc#1145841).- Do not crash when importing mount points from a multi-device filesystem.- 4.2.45
* Wed Oct 02 2019 Ancor Gonzalez Sosa - At the end of installation, copy the pervasive encryption keys to the zkey repository of the target system (jsc#SLE-7376).- 4.2.44
* Tue Oct 01 2019 aschnellAATTsuse.com- implemented detection of pervasive encryption (for jsc#SLE-7376)- 4.2.43
* Wed Sep 25 2019 José Iván López González - Partitioner: allow encrypting swap with protected and secure keys (part of jsc#SLE-7376).- Partitioner: allow importing mount points from encrypted swap with protected and secure keys.- 4.2.42
* Mon Sep 23 2019 David Diaz - Partitioner: allows encrypting volumes using pervasive encryption (jsc#SLE-7376).- 4.2.41
* Thu Sep 19 2019 David Diaz - Partitioner: allow creating encrypted swap with random password (bsc#1088641).- Partitioner: allow importing mount points from encrypted swap with random password.- Storage: fix an encryption type inconsistency (bsc#1151079).- 4.2.40
* Tue Sep 17 2019 Steffen Winterfeldt - add warning if /boot is on a LUKS2 encrypted partition- 4.2.39
* Thu Sep 05 2019 Ancor Gonzalez Sosa - Partitioner: better handling of existing encryptions, including the possibility of reusing them (related to jsc#SLE-7376).
* Wed Sep 04 2019 aschnellAATTsuse.com- added translation for new EncryptionType::PLAIN (bsc#1088641)- 4.2.38
* Fri Aug 30 2019 Steffen Winterfeldt - bind-mount /run from inst-sys to target system during install (bsc#1136463)- 4.2.37
* Wed Aug 28 2019 Ancor Gonzalez Sosa - Partitioner: display encryption type (related to jsc#SLE-7376).- 4.2.36
* Thu Aug 22 2019 schubiAATTsuse.de- Using rb_default_ruby_abi tag in the spec file in order to handle several ruby versions (bsc#1146403).- 4.2.35
* Wed Aug 21 2019 Steffen Winterfeldt - log all ng proposal settings- 4.2.34
* Sat Aug 10 2019 David Diaz - Initial Guided Proposal: added support to make the proposal using all candidates devices, without trying all possible set of settings for each individual device first (related to jsc#SLE-7238).- 4.2.33
* Thu Aug 08 2019 José Iván López González - AutoYaST: allow to create a Bcache without a caching device.- AutoYaST: allow to create a Bcache over a LVM Logical Volume.- bsc#1139783- 4.2.32
* Wed Aug 07 2019 Steffen Winterfeldt - fix NilClass issue when calculating proposal on RAID (bsc#1139808)- 4.2.31
* Mon Jul 29 2019 aschnellAATTsuse.com- Fixed exception when removing devices from btrfs (bsc#1142669)- Sort selected devices in LVM VG and btrfs dialog by name- 4.2.30
* Thu Jul 18 2019 Ancor Gonzalez Sosa - Fixed some errors calculating the initial proposal, before the user has executed the Guided Setup (related to jsc#SLE-7238).- 4.2.29
* Mon Jul 15 2019 Stefan Hundhammer - Complain if user attempts to put /boot on a thin LVM or a BCache (bsc#1134130)- 4.2.28
* Fri Jul 12 2019 David Diaz - Guided Setup: added support for the new control file option \"allocate_volume_mode\". When set to \"device\", this option allows the user to specify a device per each volume (part of jsc#SLE-7238).- 4.2.27
* Wed Jul 10 2019 José Iván López González - Add execute permissions to test files (bsc#1141006).
* Tue Jul 09 2019 José Iván López González - For Z Systems, the option to enlarge swap for suspend is always disabled by default, independently of its value in the control file (part of jsc#SLE-6926).- 4.2.26
* Tue Jul 09 2019 Stefan Hundhammer - AutoYaST: Fixed typo in filesystem type that caused a crash (bsc#1136272)- 4.2.25
* Mon Jul 08 2019 José Iván López González - AutoYaST: do not delete related partitions if they are not specifically requested (related to bsc#1096760).- 4.2.24
* Fri Jul 05 2019 José Iván López González - Proposal: add control file option to make configurable to resize and delete partitions (part of jsc#SLE-7238).- 4.2.23
* Mon Jul 01 2019 José Iván López González - Partitioner: fix importing mount points from a multi-device Btrfs filesystem (bsc#1137997).- 4.2.22
* Mon Jul 01 2019 Josef Reidinger - adopt new rubocop to be able to use the latest ruby features (bsc#1139270)- 4.2.21
* Tue Jun 18 2019 ancorAATTsuse.com- Proposal: initial support for several separate LVM volume groups (part of jsc#SLE-7238).- 4.2.20
* Mon Jun 10 2019 José Iván López González - AutoYaST: add support for multi-device Btrfs filesystems.- Part of jsc#SLE-3877.- 4.2.19
* Fri May 31 2019 Stasiek Michalski - Add metainfo (fate#319035)- Revamp spec- Replace GenericName with Comment-4.2.18
* Fri May 17 2019 ancorAATTsuse.com- AutoYaST: do not ask for a reusable filesystem when it\'s not really needed (bsc#1134330).- 4.2.17
* Thu May 16 2019 José Iván López González - Partitioner: allow to resize devices used by a multi-device Btrfs filesystem (part of jsc#SLE-3877).- 4.2.16
* Mon May 13 2019 Steffen Winterfeldt - guided proposal frees space from existing multidevice btrfs properly (bsc#1096760); the same for raid using partitions- 4.2.15
* Fri May 10 2019 Ancor Gonzalez Sosa - Partitioner: button to delete Btrfs filesystems.- Partitioner: prevent edition of block devices that are part of a multi-device Btrfs.- Part of jsc#SLE-3877.- 4.2.14
* Wed May 08 2019 José Iván López González - Partitioner: added option for creating Btrfs filesystems (single- and multidevice).- Partitioner: added option for editing devices used by a Btrfs.- Part of jsc#SLE-3877.- 4.2.13
* Thu May 02 2019 David Diaz - Partitioner: fix the Btrfs filesystem icon used in \"Type\" column.- Partitioner: improve the value for the \"Type\" column when a volume group does not have name.- Partitioner: fix the device name for a multidevice filesystem.- Partitioner: do not show label nor mount point for devices used by a multidevice filesystem.- Part of jsc#SLE-3877.- 4.2.12
* Thu May 02 2019 ancorAATTsuse.com- Partitioner: fixes in the navigation tree (bsc#1133686).- 4.2.11
* Tue Apr 30 2019 David Diaz - Partitioner: unify the \"Type\" and \"FS Type\" columns.- Partitioner: show multidevice filesystems in the system section.- Part of jsd#SLE-3877.- 4.2.10
* Tue Apr 30 2019 José Iván López González - Partitioner: added option for editing Btrfs filesystems.- Part of jsd#SLE-3877.- 4.2.9
* Wed Apr 24 2019 José Iván López González - Partitioner: BTRFS section was adapted to show both: multidevice and non-multidevice BTRFS filesystems.- Partitioner: added page for each BTRFS filesystem.- Part of jsd#SLE-3877.- 4.2.8
* Mon Apr 22 2019 David Diaz - Partitioner: by default, initialize the tree with sections expanded and devices collapsed.- Partitioner: improves the user experience preserving, between every redraw, the tree items as the were: expanded or collapsed.- Lightly related to fate#318196.- 4.2.7
* Mon Apr 15 2019 ancorAATTsuse.com- Partitioner: fixed translation issues related to bcache (bsc#1126822).- 4.2.6
* Wed Apr 10 2019 José Iván López González - AutoYaST: new format for importing/exporting NFS drives.- Related to bsc#1130256.- 4.2.5
* Wed Apr 10 2019 David Diaz - Partitioner: when editing a block device, clean-up useless LVM PV metadata from it (bsc#1129663)- 4.2.4
* Wed Apr 03 2019 José Iván López González - Fix NFS root detection when installing with AutoYaST (needed for bsc#1130256).- 4.2.3
* Wed Apr 03 2019 David Diaz - Fix initial proposal to make a clean copy of initial settings before switching to another candidate device (bsc#1130392).- Related to bsc#1102026 and bsc#1090383.- 4.2.2
* Tue Apr 02 2019 José Iván López González - Add support for installing over NFS with AutoYaST (bsc#1130256).- 4.2.1
* Tue Apr 02 2019 ancorAATTsuse.com- Fixed unit tests to also work in ARM architecture (bsc#1130957).
* Wed Mar 27 2019 José Iván López González - Do not add mount options that are default (bsc#1122867).- Short partition ids.- Move windows system detection to ExistingFilesystem class.- 4.2.0
* Tue Mar 26 2019 snwintAATTsuse.com- propose boot loader partitions only on system disk (bsc#1094927)
* Tue Mar 26 2019 José Iván López González - Improve unit tests: mocking architecture for Bcache is not needed anymore (fix regression tests for bsc#1129787).- 4.1.77
* Mon Mar 25 2019 José Iván López González - Fix boot disk detection (bsc#1129787).- 4.1.76
* Mon Mar 18 2019 Imobach Gonzalez Sosa - Fix bcache and AutoYaST related tests (related to fate#325346).- 4.1.75
* Wed Mar 13 2019 José Iván López González - Show new icons for the options of the Configure menu button (related to bsc#1122174).- 4.1.74
* Wed Mar 13 2019 schubiAATTsuse.de- Unifying name Bcache/bcache to bcache (fate#325346).- 4.1.73
* Tue Mar 12 2019 Imobach Gonzalez Sosa - Add support for Bcache to AutoYaST (fate#325346).- Fix reuse of RAID partitions for LVM volume groups and bcache devices.- 4.1.72
* Mon Mar 11 2019 David Díaz - Only exports the partition_type attribute when it belongs to a partition table with support for extended partitions (bsc#1115751).
* Wed Mar 06 2019 Stefan Hundhammer - Prevent crash if resizing a newly formatted filesystem (bsc#1124146)- 4.1.71
* Wed Mar 06 2019 Ladislav Slezák - Fixed \"can\'t modify frozen String\" crashes (related to bsc#1125006)- Fixed missing translation (bsc#1127181)- 4.1.70
* Mon Mar 04 2019 David Díaz - Translates the filesystem roles properly (bsc#1127756).- 4.1.69
* Thu Feb 28 2019 David Díaz - Do not crash when using an old MD RAID schema and the partition_nr attribute is missing. Instead, do not allow to continue because a missing value issue (bsc#1126059).- 4.1.68
* Wed Feb 27 2019 David Díaz - Do not export the partition_type attribute when it belongs to a GPT partition table (bsc#1115751).
* Fri Feb 22 2019 José Iván López González - Partitioner: improve \"Import Mount Points\" feature. Now, a fstab entry cannot be imported when the filesystem type is not supported. Moreover, the \"mount by\" type is assigned according to the fstab entry and the label of the previous filesystem is preserved (bsc#1103391).- 4.1.67
* Wed Feb 20 2019 Stefan Hundhammer - Suggest /boot/efi as the mount point for EFI System Partitions (bsc#1088120)- 4.1.66
* Wed Feb 20 2019 jreidingerAATTsuse.com- filesystem label is kept when using existing partitioning (bsc#1087229)- 4.1.65
* Wed Feb 20 2019 José Iván López González - Partitioner: add new tab in Bcache section to show all caching set devices (part of fate#325346).- 4.1.64
* Tue Feb 19 2019 ancorAATTsuse.com- Partitioner: new option \"Provide Crypt Passwords\" (bsc#1113515).- 4.1.63
* Tue Feb 19 2019 jlopezAATTsuse.com- Partitioner: allow to edit bcache devices (part of fate#325346).- 4.1.62
* Tue Feb 19 2019 Stefan Hundhammer - Added help texts for guided setup (bsc#1121801)- 4.1.61
* Mon Feb 18 2019 aschnellAATTsuse.com- AutoYaST: handle device_order for MD RAIDs during installation (bsc#1083542)- 4.1.60
* Thu Feb 14 2019 Stefan Hundhammer - Force mocking arch to x86_64 for unit tests that depend on bcache (part of jsc#SLE-4329)- 4.1.59
* Thu Feb 14 2019 Stefan Hundhammer - Limit bcache support to x86_64 arch (jsc#SLE-4329)- 4.1.58
* Thu Feb 14 2019 Ancor Gonzalez Sosa - Guided Setup: improved the disk selection user interface to properly support scenarios with many disks (bsc#1123688).- 4.1.57
* Thu Feb 14 2019 aschnellAATTsuse.com- AutoYaST: save device_order for MD RAIDs (bsc#1083542)- 4.1.56
* Fri Feb 08 2019 ancorAATTsuse.com- AutoYaST: fix broken support for retaining existing MD RAIDs in some scenarios (bsc#1120979, bsc#1121720).- 4.1.55
* Thu Feb 07 2019 jlopezAATTsuse.com- Partitioner: allow to create bcache devices without a caching set (part of fate#325346).- 4.1.54
* Wed Feb 06 2019 Ancor Gonzalez Sosa - Partitioner: when running standalone (in an installed system) abort gracefully if probing fails (bsc#1123837).- 4.1.53
* Mon Feb 04 2019 jlopezAATTsuse.com- Remove setters for bcache attributes that cannot be permanent saved (writeback_percent and sequential_cutoff).- Part of fate#325346.- 4.1.52
* Mon Feb 04 2019 Stefan Hundhammer - Limit ESP to min size on aarch64 (bsc#1119318)- 4.1.51
* Thu Jan 31 2019 jlopezAATTsuse.com- Partitioner: properly show Flash-only Bcache devices.- Part of fate#325346.- 4.1.50
* Thu Jan 31 2019 aschnellAATTsuse.com- do not show hint for details button if button does not exist (bsc#1115807)- 4.1.49
* Thu Jan 24 2019 ancorAATTsuse.com- Partitioning proposal: improved the calculation about how much each Windows partition must be resized (bsc#1121286).- 4.1.48
* Wed Jan 23 2019 Ancor Gonzalez Sosa - Make the storage proposal (i.e. the Guided Setup) easier to debug (bsc#1057436).- 4.1.47
* Wed Jan 23 2019 aschnellAATTsuse.com- do not include nil in package list of used storage features for FC devices (bsc#1122781)- 4.1.46
* Thu Jan 17 2019 ancorAATTsuse.com- Specific error pop-up for exceptions raised while calculating the storage actions (mitigation of bsc#1120070).- 4.1.45
* Thu Jan 10 2019 jlopezAATTsuse.com- Allow to cancel Guided Setup (bsc#1121442).- Link to storage client from installation summary (bsc#1099485).- 4.1.44
* Tue Dec 18 2018 schubiAATTsuse.de- Do not touch eMMC boot partitions (mmcblk
*boot
*) (bsc#1119316)- 4.1.43
* Tue Dec 18 2018 aschnellAATTsuse.com- do not use removed function IconPath anymore (bsc#1119699)- 4.1.42
* Tue Dec 11 2018 jlopezAATTsuse.com- Hardening execution of system commands (part of bsc#1118291).- 4.1.41
* Wed Dec 05 2018 Stasiek Michalski - Ship only primary icons with module to avoid conflicts (boo#1118521)- 4.1.40
* Tue Dec 04 2018 jlopezAATTsuse.com- Partitioner: does not allow to create BTRFS subvolumes with unsafe characters in its path (related to bsc#1059972).- 4.1.39
* Fri Nov 30 2018 ancorAATTsuse.com- Support for Raspberry Pi in Guided Proposal: it suggests to keep the firmware partition and mount it as /boot/vc (fate#323484).- 4.1.38
* Tue Nov 27 2018 Noah Davis - Provide icon with module (boo#1109310)- 4.1.37
* Thu Nov 22 2018 jlopezAATTsuse.com- Partitioner: add support for UDF filesystem (fate#326877).- 4.1.36
* Fri Nov 16 2018 Ancor Gonzalez Sosa - The Guided Proposal tries to preserve partitions of type IRST (Intel Rapid Start Technology) when possible (bsc#1099187, fate#325885).- Made the Guided Proposal algorithm more clear, so it\'s easier to debug (bsc#1057436).- 4.1.35
* Fri Nov 16 2018 jlopezAATTsuse.com- Initial proposal tries all possible attempts over each candidate device before switching to another device.- Related to bsc#1102026 and bsc#1090383.- 4.1.34
* Fri Nov 16 2018 snwintAATTsuse.com- adjust boot requirements to handle RAID cases (fate#326573)- 4.1.33
* Wed Nov 14 2018 schubiAATTsuse.de- SkipListValue.size_k returns the correct value (bsc#1115507).- 4.1.32
* Thu Nov 08 2018 ancorAATTsuse.com- Internal code reorganization at Proposal::SpaceMaker (preparations for fate#325885 and fate#323484).
* Wed Nov 07 2018 jlopezAATTsuse.com- Crypttab entry allows to find a crypttab device by its UUID.- Devicegraph#find_by_any_name is able to find a LUKS device by using its name at crypttab file.- Related to bsc#1094963.- 4.1.31
* Wed Nov 07 2018 dgonzalezAATTsuse.com- Improve the proposal to be able to work with existing MD RAIDs (fate#326573).- 4.1.30
* Wed Oct 31 2018 Stefan Hundhammer - Format the new multi-line compound actions correctly (bsc#1085134)- 4.1.29
* Tue Oct 30 2018 snwintAATTsuse.com- do not include \'Partition\' in partition type names
* Fri Oct 26 2018 snwintAATTsuse.com- allow creation of partitions starting before 1 MiB in expert partitioner
* Sat Oct 20 2018 igonzalezsosaAATTsuse.com- Fixes and improvements to AutoYaST partitioning: - Improve support to reuse a disk as a PV (bsc#1107298). - Resize and then create new devices (bsc#1112545). - Warn the user when trying to reuse a non-existent filesystem. - Fix support of old format to specify several software RAIDs (bsc#1112546). - Proper support for Xen virtual partitions (bsc#1105350). - Export enable_snapshots element properly (related to bsc#1073544). - Allow to format a whole disk and use it as a filesystem. - Add support for partitioned software RAIDs (fate#326573). - Allow to use a whole disk as a software RAID member (related to fate#326573).- 4.1.28
* Fri Oct 19 2018 jreidingerAATTsuse.com- Add support for selecting cache mode during bcache creation (fate#325346)- 4.1.27
* Thu Oct 18 2018 ancorAATTsuse.com- Improved UI responsiveness by caching the value of some internal methods (bsc#1112402):
* StorageClassWrapper.downcasted_new
* StorageEnv#active?
* DiskDevice#types_for_is- Improved compatibility with RSpec 3.8 by caching the objects used to wrap libstorage-ng enum values.- 4.1.26
* Tue Oct 16 2018 jreidingerAATTsuse.com- Improve filtering of possible backing devices for bcache and limit deletion of bcache to only safe cases (fate#325346)- 4.1.25
* Thu Oct 11 2018 ancorAATTsuse.com- Improved the warning messages about missing BIOS Boot partition, both in the Partitioner and in AutoYaST (bsc#1087275).- Improved other AutoYaST warning messages related to the partitions needed for booting.- 4.1.24
* Fri Oct 05 2018 jreidingerAATTsuse.com- Implement creating and deleting bcache devices (fate#325346)- 4.1.23
* Tue Oct 02 2018 schubiAATTsuse.de- Fixed flickering testcase. Maybe produced by the fix of bsc#1108831.- 4.1.22
* Tue Oct 02 2018 ancorAATTsuse.com- Partitioner: make it possible to directly format a disk (with no partitions).- Partitioner: reorganized the user interface by grouping options to ensure all the new possibilities (like formatting a whole disk or creating partitions on an MD RAID) fit into text mode 80x24 (part of fate#318196 and of fate#326573).- 4.1.21
* Thu Sep 27 2018 schubiAATTsuse.de- AutoYaST proposal: Do not crash if existing boot partition cannot be used without formatting it. (bsc#1108831)- 4.1.20
* Thu Sep 20 2018 jlopezAATTsuse.com- Partitioner: ask for unmounting when deleting a device.- Partitioner: ask for unmounting when resizing a device.- Part of fate#318196- 4.1.19
* Thu Sep 20 2018 jlopezAATTsuse.com- AutoYaST: Allow to use whole disk as PV by indicating a partition with number 0 (bsc#1107298).
* Wed Sep 19 2018 lorenzAATTmath.tu-berlin.de- When trying to reuse a partition, AutoYaST will consider only those partitions from the right disk (bsc#1106774).
* Wed Sep 19 2018 dgonzalezAATTsuse.com- Do not crash when a partition content info cannot be detected (bsc#1101979).- 4.1.18
* Wed Sep 19 2018 jreidingerAATTsuse.com- Add read-only support for Bcache (fate#325346)- 4.1.17
* Wed Sep 19 2018 ancorAATTsuse.com- Partitioner: allow to manage partitions in software MD RAIDs (fate#318196, bsc#1094933 and bsc#1092417).- 4.1.16
* Fri Sep 07 2018 ancorAATTsuse.com- Partitioner: do not offer partitions of other RAIDs as available devices to create MD RAID arrays (fate#318196).- 4.1.15
* Wed Sep 05 2018 ancorAATTsuse.com- Partitioner: allow to add full disks and multipath devices (with no partition table) to MD RAID arrays (fate#318196).- Partitioner: improved checks and workflow for \"Create New Partition Table\"- More informative message when a device is in use.- 4.1.14
* Tue Sep 04 2018 jreidingerAATTsuse.com- Add asterisk to mount points that is not active and also write it to description (FATE#318196)- 4.1.13
* Thu Aug 30 2018 jlopezAATTsuse.com- Improved wording when moving partitions (bsc#1099599).- 4.1.12
* Wed Aug 29 2018 jreidingerAATTsuse.com- Add support for Intel Rapid Start technology partitions (FATE#325885)- 4.1.11
* Tue Aug 28 2018 ancorAATTsuse.com- Fixed a wrong unit test.- 4.1.10
* Fri Aug 24 2018 mvidnerAATTsuse.com- RAID attributes: include \"Active: Yes/No\" (bsc#1090010)
* Wed Aug 22 2018 knut.anderssenAATTsuse.com- Partitioner: Hide the \"what to do\" selector for windows partitions if there are no windows partitions (bsc#1055646)- 4.1.9
* Wed Aug 22 2018 schubiAATTsuse.de- Switched license in spec file from SPDX2 to SPDX3 format.
* Wed Aug 22 2018 schubiAATTsuse.de- Changed dir of COPYING file.
* Tue Aug 21 2018 shundhammerAATTsuse.com- Fixed crash in the Kubic proposal when insufficient disk space (bsc#1099762)- 4.1.8
* Fri Aug 17 2018 ancorAATTsuse.com- AutoYaST: recognize Xen virtual partitions in the profile when importing and installing (bsc#1085134).- 4.1.7
* Tue Aug 14 2018 igonzalezsosaAATTsuse.com- AutoYaST: set the \'mount by\' option when reusing partitions (bsc#1104774).- 4.1.6
* Tue Aug 14 2018 knut.anderssenAATTsuse.com- Partitioner: Permit going back when the partition dialog is skipped (bsc#1075443)- 4.1.5
* Mon Aug 13 2018 ancorAATTsuse.com- Partitioner: fixed some strings that contained mistakes about format and/or internationalization.
* Fri Aug 10 2018 ancorAATTsuse.com- Fixed the warning about overwriting a manually edited partition layout. Now it works even after going back and forth in the installer steps (bsc#1055756).- 4.1.4
* Thu Aug 09 2018 ancorAATTsuse.com- Partitioner: display Xen virtual partitions and allow to format and mount them (bsc#1085134).
* Tue Jul 31 2018 schubiAATTsuse.de- Warning if overwriting manually edited settings (bsc#1055756)- 4.1.3
* Tue Jul 31 2018 igonzalezsosaAATTsuse.com- AutoYaST: export volume group name (lvm_group) when a MD RAID device is used as a physical volume (bsc#1103113).- 4.1.2
* Thu Jul 26 2018 snwintAATTsuse.com- make bsc#1098594 regression test work on s390- 4.1.1
* Wed Jul 25 2018 aschnellAATTsuse.com- use \"Partition Table\" instead of \"Disk Label\" in expert partitioner (bsc#1070570)- 4.1.0
* Mon Jul 23 2018 snwintAATTsuse.com- document XEN guest setup for testing (bsc#1085134)- 4.0.199
* Wed Jul 18 2018 ancorAATTsuse.com- Partitioner: when creating a partition, use only regions of the selected type: primary, logical or extended (bsc#1097634).- 4.0.198
* Wed Jul 18 2018 ancorAATTsuse.com- AutoYaST: export BIOS RAID devices correctly (bsc#1098594).- 4.0.197
* Mon Jul 16 2018 ancorAATTsuse.com- AutoYaST: do not crash when reusing partitions on non-disk devices like DASD or BIOS RAID (bsc#1098594).- 4.0.196
* Thu Jun 28 2018 schubiAATTsuse.de- Added additional searchkeys to desktop file (fate#321043).- 4.0.195
* Fri Jun 22 2018 aschnellAATTsuse.com- mask systemd mount and swap units while expert partitioner is running (bsc#1073633)- 4.0.194
* Tue Jun 19 2018 jlopezAATTsuse.com- Partitioner: add checkbox to format system volumes when importing mount points (bsc#1078359 and bsc#1094924).- 4.0.193
* Fri Jun 15 2018 ancorAATTsuse.com- Partitioner: honor default subvolumes when importing the root mount point (related to bsc#1078359, bsc#1083851 and fate#318196)- Partitioner: honor default snapshots configuration when importing the root mount point (bsc#966637)
* Thu Jun 14 2018 lslezakAATTsuse.cz- Fixed crash in the error callback when the text contained non-ASCII characters in the translated message (bsc#1096758)- 4.0.192
* Wed Jun 13 2018 snwintAATTsuse.com- allow for numbers > 32 bit in region dialog (bsc#1065258)- 4.0.191
* Tue Jun 12 2018 igonzalezsosaAATTsuse.com- Fix \'Arbitrary Option Value\' translation (bsc#1081605).- 4.0.190
* Tue Jun 12 2018 lslezakAATTsuse.cz- Use parallel_tests to speed up running the unit tests (bsc#1094875), active only in SLE15-SP1/Leap-15.1
* Tue Jun 12 2018 ancorAATTsuse.com- Better auto-generated names for encryption devices:
* Based on the udev id of the encrypted devices instead of its kernel name (bsc#760213).
* Adapted when partition numbers change, if doable (bsc#1094157).
* Prevent collision with other DeviceMapper names (bsc#1094157).- Do not write LUKS password of the proposal into YaST logs.- Do not crash when registering a zero-sized device into the logs.- 4.0.189
* Mon Jun 11 2018 igonzalezsosaAATTsuse.com- AutoYaST: fix handling of empty Btrfs subvolume prefixes (bsc#1096240).- 4.0.188
* Thu Jun 07 2018 jlopezAATTsuse.com- Added method to update encryption names according to a crypttab file (needed for bsc#1094963).- 4.0.187
* Tue Jun 05 2018 jlopezAATTsuse.com- Partitioner: fixed error when creating new BTRFS subvolumes in an installed system (bsc#1067510).- 4.0.186
* Tue Jun 05 2018 shundhammerAATTsuse.com- Partitioner: Handle limitations for volume labels (bsc#1084867)- 4.0.185
* Mon Jun 04 2018 jlopezAATTsuse.com- Partitioner: allow to move partitions (part of fate#318196).- 4.0.184
* Thu May 17 2018 ancorAATTsuse.com- Added to the installer a detailed description about the origin of the partitioning layout, as discussed in bsc#1089274.- 4.0.183
* Thu May 17 2018 jlopezAATTsuse.com- Allow to consider MD RAIDs as BIOS RAIDs by using the env variable LIBSTORAGE_MDPART (bsc#1092417).
* Thu May 17 2018 jlopezAATTsuse.com- Fixed tests to avoid to require files provided by yast-installation package (needed for bsc#1091047).
* Wed May 16 2018 jlopezAATTsuse.com- Fixed detection of candidate disks for installation (bsc#1091047).- 4.0.182
* Wed May 16 2018 snwintAATTsuse.com- don\'t reuse prep partitions larger than 8 MiB (bsc#1090019)- 4.0.181
* Wed May 16 2018 igonzalezsosaAATTsuse.com- Partitioner: fix several translation issues (bsc#1081837 and bsc#1081601).
* Mon May 14 2018 ancorAATTsuse.com- Expose the active flag of the MountPoint class (needed for the definitive fix for bsc#1064437 in modern distributions).- 4.0.180
* Fri May 11 2018 igonzalezsosaAATTsuse.com- Partitioner: check whether required packages are installed before committing changes to disk (bsc#1089508).- 4.0.179
* Fri May 11 2018 jlopezAATTsuse.com- Partitioner: fix buttons to abort and to go back (part of fate#318196 and related to bsc#1075443).- Partitioner: fixed detection of reprobed system to avoid unnecessary proposal re-calculation.
* Fri May 11 2018 jlopezAATTsuse.com- Partitioner: allow to select only valid parity algorithms when creating a new MD RAID (bsc#1090182).
* Fri May 11 2018 ancorAATTsuse.com- Partitioner: \"Configure...\" button allowing to execute the YaST clients for iSCI, FCoE, DASD, zFCP and XPRAM (bsc#1090753).
* Wed May 09 2018 igonzalezsosaAATTsuse.com- AutoYaST: do not crash when size is set to \'auto\' for a partition without a mount point (bsc#1092414).- 4.0.178
* Tue May 08 2018 shundhammerAATTsuse.com- Add note to YAML files for devices not supported in YAML (part of fate#318196)- 4.0.177
* Mon May 07 2018 shundhammerAATTsuse.com- Dump devicegraphs and actions in better strategic places (part of fate#318196)- Make sure not to write LUKS passwords to YAML dump files- 4.0.176
* Fri May 04 2018 aschnellAATTsuse.com- provide function to disable MD auto assembly (bsc#1090690)- provide function to inhibit udisks from doing mounts- use these two functions when running expert partitioner- 4.0.175
* Fri May 04 2018 jlopezAATTsuse.com- Partitioner: added option to import mount points (part of fate#318196 and bsc#1083851).- 4.0.174
* Fri May 04 2018 igonzalezsosaAATTsuse.com- AutoYaST: handle and empty values properly (bsc#1076337, bsc#1090095 and bsc#1091669).- 4.0.173
* Thu May 03 2018 ancorAATTsuse.com- Set fs_passno to 2 for ext2/3/4 filesystems assigned to non-root mount points (bsc#1078703).- 4.0.172
* Thu May 03 2018 shundhammerAATTsuse.com- Don\'t require rspec/mocks (not present in inst-sys) (part of fate#318196)- 4.0.171
* Wed May 02 2018 shundhammerAATTsuse.com- Dump devicegraph and actions to separate human readable files (part of fate#318196)- 4.0.170
* Fri Apr 27 2018 ancorAATTsuse.com- Partitioner: fixed checks when the root filesystem is NFS (bsc#1090752).- 4.0.169
* Fri Apr 27 2018 jreidingerAATTsuse.com- add method to check if system has any disk device (bsc#1090753)- 4.0.168
* Fri Apr 27 2018 ancorAATTsuse.com- Set fs_passno to 1 for ext2/3/4 root filesystems (bsc#1078703).- 4.0.167
* Fri Apr 27 2018 jreidingerAATTsuse.com- fix libstorage logging that do not expect printf expansion (bsc#1091062)- 4.0.166
* Thu Apr 26 2018 ancorAATTsuse.com- Ensure the installer adds reused devices to /etc/crypttab and/or /etc/mdadm.conf if needed for booting (bsc#1071350).- 4.0.165
* Wed Apr 25 2018 jlopezAATTsuse.com- Partitioner: fix bug after confirming changes in a running system (related to bsc#1086892).- 4.0.164
* Tue Apr 24 2018 jlopezAATTsuse.com- Partitioner: do not validate setup just after rescanning (related to bsc#1086892).- 4.0.163
* Mon Apr 23 2018 ancorAATTsuse.com- Partitioner: use the correct default value for \'Enable Snapshots\' when the \'Operating System\' role is chosen for a new device (bsc#1084491).- 4.0.162
* Mon Apr 23 2018 jlopezAATTsuse.com- Make the package to be architecture dependant to correctly check the current architecture (bsc#1081198).- 4.0.161
* Fri Apr 20 2018 igonzalezsosaAATTsuse.com- AutoYaST: properly handle empty proposals (bsc#1090390).- 4.0.160
* Fri Apr 20 2018 ancorAATTsuse.com- Implemented the use_available LVM strategy for the proposal (part of fate#318196).- Make use_available the new default LVM strategy, so the system behavior is closer to the old yast-storage.- Speed improvements in the use_needed LVM strategy.- 4.0.159
* Fri Apr 20 2018 jlopezAATTsuse.com- Partitioner: add missing warning and summary of changes when running in an installed system (part of fate#318196 and related to bsc#1086892).- 4.0.158
* Thu Apr 19 2018 igonzalezsosaAATTsuse.com- Fix some translations issues in the Expert Partitioner (bsc#1081571).
* Wed Apr 18 2018 ancorAATTsuse.com- Updated libstorage-ng dependency to ensure slots on extended partitions are handled correctly and added regression unit test about it (bsc#1088483).- Significant speed improvements in the proposal code.
* Tue Apr 17 2018 shundhammerAATTsuse.com- Added missing help texts in the partitioner (bsc#1079591)- 4.0.157
* Fri Apr 13 2018 jlopezAATTsuse.com- Added support for settings \'expert_partitioner_warning\' and \'proposal_settings_editable\' (bsc#1087486).- Fix bug going back in Partitioner: only re-calculate proposal when the system was re-probed (bsc#1088960).- 4.0.156
* Fri Apr 13 2018 igonzalezsosaAATTsuse.com- AutoYaST: support partition_type when set to \"primary\" (bsc#1081506).- 4.0.155
* Fri Apr 13 2018 ancorAATTsuse.com- More informative message displayed when the proposal failed with some given settings, so it doesn\'t sound like a definitive error (related to bsc#1089274).- 4.0.154
* Tue Apr 10 2018 jlopezAATTsuse.com- Partitioner: fix creation of default BTRFS subvolume (bsc#1087918 and bsc#1087763).- 4.0.153
* Tue Apr 10 2018 ancorAATTsuse.com- Partitioner: make possible for the embedded yast2-nfs-client to access the vfstype field of fstab, so it can detect and correct legacy NFS entries (bsc#1088426).- 4.0.152
* Tue Apr 10 2018 jlopezAATTsuse.com- Update dependency with libstorage-ng (ensure lock system).- Part of fate#318196.- 4.0.151
* Mon Apr 09 2018 ancorAATTsuse.com- Fixed the disable_order property of control.xml. Now it affects all the configurable aspects of the volume, as documented (related to bsc#1078495).- 4.0.150
* Mon Apr 09 2018 jlopezAATTsuse.com- Add system lock to avoid several processes using the storage stack when a process is already using it with read-write access.- Part of fate#318196.- 4.0.149
* Mon Apr 09 2018 ancorAATTsuse.com- Force UTF-8 encoding for (most) strings coming from libstorage-ng (bsc#1088067).- 4.0.148
* Thu Apr 05 2018 shundhammerAATTsuse.com- Better error handling if no storage proposal is possible (bsc#1064677)- 4.0.147
* Tue Apr 03 2018 jlopezAATTsuse.com- Recover method #exists_in_probed? (bsc#1087818).- 4.0.146
* Tue Apr 03 2018 igonzalezsosaAATTsuse.com- Partitioner: do not crash when a striped logical volume is selected (bsc#1087702).
* Tue Apr 03 2018 ancorAATTsuse.com- Fixed an error searching devices by name introduced by the recent sanitization related to bsc#1083672.- 4.0.145
* Mon Apr 02 2018 jlopezAATTsuse.com- Partitioner: add check for minimum size when using snapshots (bsc#1085131).- 4.0.144
* Mon Apr 02 2018 ancorAATTsuse.com- If a duplicate PV is found, show an specific error message with instructions (bsc#1082542).- 4.0.143
* Mon Apr 02 2018 jlopezAATTsuse.com- Use correct probe mode in unit tests (fate#318196).
* Mon Mar 26 2018 ancorAATTsuse.com- Honor the LIBSTORAGE_MULTIPATH_AUTOSTART environment variable (part of fate#318196 and part of the fix for bsc#1082542).- 4.0.142
* Mon Mar 26 2018 jlopezAATTsuse.com- Sanitize devicegraph after probing when there are LVM volume groups with missing physical volumes (bsc#1083672).- 4.0.141
* Mon Mar 26 2018 shundhammerAATTsuse.com- Partitioner: Report detailed reasons why resizing is not possible (fate#318196)- 4.0.140
* Mon Mar 26 2018 ancorAATTsuse.com- Partitioner: fixed an error that was causing filesystems to be deleted in some combination of actions (part of fate#318196).
* Fri Mar 23 2018 igonzalezsosaAATTsuse.com- AutoYaST: add support for LVM thin pools (bsc#1086596).- AutoYaST: add support for stripes/stripesize elements.- 4.0.139
* Mon Mar 19 2018 jlopezAATTsuse.com- Fix issues with zero-size devices (bsc#1083887).- Proposal: do not use zero-size devices.- Partitioner: completely hide zero-size devices.- 4.0.138
* Fri Mar 16 2018 ancorAATTsuse.com- Added methods to deal with /etc/fstab specs (part of bsc#1071454)- 4.0.137
* Fri Mar 16 2018 igonzalezsosaAATTsuse.com- AutoYaST: fixed space distribution on LVM volume groups when using percentages (bsc#1079369).- AutoYaST: do not ignore free spaces smaller than 30MiB (bsc#1085627).- 4.0.136
* Thu Mar 15 2018 jreidingerAATTsuse.com- Warn if user creates too big PReP partition which firmware can have problem to load (bsc#1081979)- 4.0.135
* Thu Mar 15 2018 shundhammerAATTsuse.com- Partitioner: Check if resize is possible based on filesystem type (fate#318196)- 4.0.134
* Thu Mar 15 2018 jlopezAATTsuse.com- Partitioner: do not allow to remove implicit partitions.- Partitioner: allow to remove any disk device (not only disks).- Part of fate#318196.- 4.0.133
* Tue Mar 13 2018 shundhammerAATTsuse.com- Post a warning if reusing an existing system mount point without formatting during installation in the partitioner (bsc#1080073)- 4.0.132
* Mon Mar 12 2018 igonzalezsosaAATTsuse.com- Add a new btrfs_read_only property to force the root filesystem to be read-only (bsc#1079000)- Honor the subvolumes list for the root filesystem (bsc#1077866)- 4.0.131
* Mon Mar 12 2018 jlopezAATTsuse.com- Partitioner: always allow to edit the partition id (bsc#1077868).- 4.0.130
* Fri Mar 09 2018 ancorAATTsuse.com- Shadowed subvolumes that are ignored in the first proposal attempt are not longer omitted in subsequent ones (#bsc#1084213 and bsc#1084261).- 4.0.129
* Thu Mar 08 2018 jlopezAATTsuse.com- Make proposal to work with implicit partition tables (s390).- Part of fate#318196.- 4.0.128
* Wed Mar 07 2018 shundhammerAATTsuse.com- Make sure subvolumes use the same mount_by as their parent btrfs (bsc#1080408)- 4.0.127
* Wed Mar 07 2018 ancorAATTsuse.com- Better control on whether a separate /boot/zipl is needed in S/390 systems, both in the Guided Setup and the Partitioner.- Do not longer report FBA DASDs to be unsupported devices for booting (they are indeed supported).- Part of bsc#1070265.- 4.0.126
* Wed Mar 07 2018 snwintAATTsuse.com- fix translations in blk_device_resize.rb (bsc#1081598)- 4.0.125
* Mon Mar 05 2018 jlopezAATTsuse.com- Guided proposal uses preferred partition table type when possible (e.g., all partitions are deleted).- Part of fate#318196.- 4.0.124
* Mon Mar 05 2018 jreidingerAATTsuse.com- Add specialized warning when /boot/efi is on software RAID (bsc#1081578)- 4.0.123
* Mon Mar 05 2018 igonzalezsosaAATTsuse.com- AutoYaST: do not stop installation when there is not enough space for automatically added boot devices (bsc#1082999).
* Fri Mar 02 2018 igonzalezsosaAATTsuse.com- AutoYaST: support to export LVM volume group and MD RAIDs (bsc#1081331).
* Fri Mar 02 2018 ancorAATTsuse.com- New PReP partitions proposed by the Guided Setup are now always primary (bsc#1082468).- 4.0.122
* Fri Mar 02 2018 snwintAATTsuse.com- ensure proper hierarchy when creating btrfs subvolumes (bsc#1078732)- 4.0.121
* Thu Mar 01 2018 shundhammerAATTsuse.com- Use default swap priority, not 42 (bsc#1066077)- 4.0.120
* Thu Mar 01 2018 jreidingerAATTsuse.com- Do not crash for separate /boot which does not exists yet (bsc#1078774- 4.0.119
* Thu Mar 01 2018 jlopezAATTsuse.com- Partitioner: allow to clone a disk (part of fate#318196).- 4.0.118
* Wed Feb 28 2018 ancorAATTsuse.com- More reliable parsing for the hwinfo output (bsc#1082536).- Better documentation and tests for activate callbacks.- 4.0.117
* Wed Feb 28 2018 aschnellAATTsuse.com- adapted to new activate callbacks in libstorage-ng (see bsc#1082542)- 4.0.116
* Tue Feb 27 2018 igonzalezsosaAATTsuse.com- Keep encryption when adding a device to a LVM volume group (bsc#1077750).- 4.0.115
* Tue Feb 27 2018 ancorAATTsuse.com- Improved handling of libstorage-ng errors (bsc#1070459, bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776, bsc#1070459 and some others).- 4.0.114
* Mon Feb 26 2018 shundhammerAATTsuse.com- Use format(), not Ruby variable expansion for translated messages (bsc#1081454)- 4.0.113
* Mon Feb 26 2018 ancorAATTsuse.com- Partitioner: ensure a valid password is provided when encrypting a device (bsc#1065079).- Increase to 8 characters the minimum size to consider an encryption password to be valid (same limit than yast2-storage).- 4.0.112
* Fri Feb 23 2018 jreidingerAATTsuse.com- Do not allow to encrypt too small partition (bsc#1065071)- Check size for separate /boot- 4.0.111
* Fri Feb 23 2018 jlopezAATTsuse.com- Partitioner: prevent to modify devices used in LVM or MD RAID (bsc#1079827).- 4.0.110
* Fri Feb 23 2018 ancorAATTsuse.com- Better handling of errors during hardware probing (bsc#1070459, bsc#1079228, bsc#1079817, bsc#1063059, bsc#1080554, bsc#1076776, bsc#1070459 and some others).- 4.0.109
* Fri Feb 23 2018 jlopezAATTsuse.com- Avoid to write files in tests (SCR.Write) (fate#323457).
* Thu Feb 22 2018 aschnellAATTsuse.com- adapted to callback improvements in libstorage-ng (bsc#1070459 and many others)- 4.0.108
* Thu Feb 22 2018 shundhammerAATTsuse.com- Added missing textdomain calls (bsc#1081454)- 4.0.107
* Thu Feb 22 2018 igonzalezsosaAATTsuse.com- AutoYaST: fix support to create multiple volume groups (bsc#1081633).- 4.0.106
* Thu Feb 22 2018 shundhammerAATTsuse.com- Added missing ptable type conversion (fate#323457)- 4.0.105
* Thu Feb 22 2018 shundhammerAATTsuse.com- Changed default partition table from MSDOS to GPT (fate#323457)- 4.0.104
* Thu Feb 22 2018 snwintAATTsuse.com- ensure partition name changes during the proposal process are taken properly into account (bsc#1078691)- 4.0.103
* Wed Feb 21 2018 jlopezAATTsuse.com- Use sysconfig storage file to read the default value for mount_by (bsc#1081198).- Partitioner: allow to configure default value for mount_by.- 4.0.102
* Wed Feb 21 2018 ancorAATTsuse.com- Do not take into account unformatted DASDs as a possible target for installation (bsc#1071798).- Partitioner: do not show unformatted DASDs, since they cannot be partitioned or used in any other way.
* Wed Feb 21 2018 igonzalezsosaAATTsuse.com- AutoYaST: guess which filesystem type should be used for a given partition/logical volume when it is not specified in the profile (bsc#1075203).
* Tue Feb 20 2018 shundhammerAATTsuse.com- Special handling for mount options for / and /boot/
* in the partitioner (bsc#1080731)- 4.0.101
* Tue Feb 20 2018 ancorAATTsuse.com- Partitioner: bring back traditional list of mount points for both installation and installed system (bsc#1076167 and bsc#1081200).- Partitioner: bring back traditional behavior of the \"Operating System\" and \"Data\" roles during installation (bsc#1078975 and bsc#1073854).- 4.0.100
* Mon Feb 19 2018 shundhammerAATTsuse.com- Special handling for mount options for / and /boot/
* (bsc#1080731, bsc#1061867, bsc#1077859)- 4.0.99
* Mon Feb 19 2018 jreidingerAATTsuse.com- Ensure that there is always selected item in table, if it is not empty (bsc#1076318)- 4.0.98
* Thu Feb 15 2018 ancorAATTsuse.com- Adjusted the suggested and minimum sizes of all the booting partitions, both in the storage proposal and in the Partitioner validations (bsc#1076851 and fate#318196).- 4.0.97
* Thu Feb 15 2018 igonzalezsosaAATTsuse.com- Fix hwinfo parsing to support more than one device_file property (bsc#1080999)- 4.0.96
* Thu Feb 15 2018 jreidingerAATTsuse.com- Split detection of problematic boot scenarios into errors and warnings. With warnings user can continue, but not with errors. (bsc#1074475)- 4.0.95
* Wed Feb 14 2018 jlopezAATTsuse.com- PowerPC: do not require /boot partition for non-PowerNV (bsc#1070139).- Partitioner: do not enforce partition id for /boot/efi (bsc#1078707).- 4.0.94
* Mon Feb 12 2018 snwintAATTsuse.com- add format options dialog (bsc#1077868)- 4.0.93
* Mon Feb 12 2018 ancorAATTsuse.com- More reasonable location in the disk for the partitions proposed to make the system bootable (bsc#1073680 and bsc#1076851).
* Fri Feb 09 2018 jlopezAATTsuse.com- Partitioner: fix issues using transactions (bsc#1079880 and bsc#1079573).- 4.0.92
* Fri Feb 09 2018 ancorAATTsuse.com- Enable multipathd in the target system at the end of installation if there are multipath devices (bsc#1076183).- Updated required version of libstorage-ng-ruby (bsc#1079541).- 4.0.91
* Thu Feb 08 2018 jlopezAATTsuse.com- Add class MountPoint (needed for bsc#1076305 and bsc#1066763).- 4.0.90
* Thu Feb 08 2018 ancorAATTsuse.com- Partitioner: fixed creation of partition tables (bsc#1078721).- 4.0.89
* Thu Feb 08 2018 ancorAATTsuse.com- Partitioner: fixed \'Installation Summary\' section (part of fate#318196).- 4.0.88
* Thu Feb 08 2018 igonzalezsosaAATTsuse.com- AutoYaST: support additional names in the drive/device element (bsc#1077277).- 4.0.87
* Wed Feb 07 2018 shundhammerAATTsuse.com- Disabled empty pages in partitioner for the time being (bsc#1078849)- 4.0.86
* Wed Feb 07 2018 igonzalezsosaAATTsuse.com- AutoYaST: support reuse of already existing partitions as LVM physical volumes or MD RAIDs (bsc#1077277).- 4.0.85
* Wed Feb 07 2018 ancorAATTsuse.com- Partitioner: fixed \'Device Graph\' section (part of fate#318196).- 4.0.84
* Mon Feb 05 2018 ancorAATTsuse.com- Added a new \'disk\' client, alias for \'partitioner\' (bsc#1078900).- 4.0.83
* Wed Jan 31 2018 shundhammerAATTsuse.com- Handle arbitrary mount options for /etc/fstab properly (bsc#1066076)- 4.0.82
* Wed Jan 31 2018 jlopezAATTsuse.com- Partitioner: list all LVM thin volumes to delete when an LVM thin pool is going to be deleted.- Partitioner: show warning when an LVM thin pool is overcommitted after resizing.- Part of fate#318196.- 4.0.81
* Wed Jan 31 2018 igonzalezsosaAATTsuse.com- AutoYaST: try to shrink new partitions/logical volumes proportionally when there is not enough space (bsc#1078418).- 4.0.80
* Wed Jan 31 2018 ancorAATTsuse.com- Partitioner: initial support for NFS (part of fate#318196)- Partitioner: removed useless tmpfs option- 4.0.79
* Tue Jan 30 2018 jlopezAATTsuse.com- Partitioner: allow to create LVM thin pools and volumes.- Fix transactions of devicegraphs.- Part of fate#318196.- 4.0.78
* Tue Jan 30 2018 jlopezAATTsuse.com- Partitioner: improve error message when trying to remove an used physical volume.
* Thu Jan 25 2018 shundhammerAATTsuse.com- Add default mount options for /etc/fstab for ext2/3/4 and vfat (bsc#1066076)- 4.0.77
* Wed Jan 24 2018 igonzalezsosaAATTsuse.com- Properly detect snapshots subvolumes (bsc#1076321 and bsc#1076335).- 4.0.76
* Tue Jan 23 2018 jlopezAATTsuse.com- Partitioner: allow to resize LVM volume groups.- Part of fate#318196.- 4.0.75
* Tue Jan 23 2018 ancorAATTsuse.com- Partitioner: consider all sizes entered by the user as base of 2 despite the units not being consistent with the International System. Thus, 1KB (which in the IS actually means 1000 bytes) becomes equivalent to 1KiB (which is 1024 bytes).
* Tue Jan 23 2018 snwintAATTsuse.com- fix proposal dialog error when there are no disks (bsc#1057430)
* Mon Jan 22 2018 jlopezAATTsuse.com- Avoid partitioning checks error when using old settings format.- Needed for bsc#1059160, bsc#1055747 and bsc#1063957.
* Mon Jan 22 2018 ancorAATTsuse.com- Partitioner: button to resize LVM logical volumes now works as expected (part of fate#31896).- 4.0.74
* Mon Jan 22 2018 igonzalezsosaAATTsuse.com- Consider all free spaces when deciding which partitions distribution is better (bsc#1077051).
* Fri Jan 19 2018 jlopezAATTsuse.com- Fix TODOs labels in partitioner (bsc#1058652).- 4.0.73
* Fri Jan 19 2018 jreidingerAATTsuse.com- Fix subtracting arrays of devices (fixes multipath wires detection for bsc#1076766)- 4.0.72
* Fri Jan 19 2018 ancorAATTsuse.com- Partitioner: when creating partitions they are now aligned to hardware requirements (indispensable for DASD) and when possible also for optimal performance (bsc#1069860 and bsc#1072011).- Partitioner: adjusted alignment logic during resizing to match the new logic used during creation.- Partitioner: skip validation of disabled widgets in the dialog to select the size of a new partition.- Partitioner: fixed a crash and one inconsistency in the dialog to resize an existing partition.- 4.0.71
* Fri Jan 19 2018 ancorAATTsuse.com- Correctly open the expert partitioner when called from the Kubic/CaaSP summary screen (bsc#1076732)- 4.0.70
* Mon Jan 15 2018 jlopezAATTsuse.com- Added sanity checks for partitioning setup.- Partitioner: setup issues are shown to the user before continue. Mandatory product volumes are required according to control file.- Part of fate#31896 and fix for bsc#1059160, bsc#1055747 and bsc#1063957.- 4.0.69
* Mon Jan 15 2018 ancorAATTsuse.com- Some code reorganization regarding alignment and resizing.- Added to several places in the API the possibilty of using other alignment types, in addition to the optimal one.- Added a (temporary) workaround to a possible bug in libstorage-ng regarding alignment.
* Tue Jan 09 2018 lslezakAATTsuse.cz- Added Mountable#persistent? (needed for bsc#1073696)- 4.0.68
* Mon Jan 08 2018 ancorAATTsuse.com- Added Devicegraph#find_by_any_name (needed for bsc#1073254)- 4.0.67
* Mon Jan 08 2018 ancorAATTsuse.com- Do not try to reuse UUID and label from unformatted swap partitions (bsc#1071515).- 4.0.66
* Mon Jan 08 2018 igonzalezsosaAATTsuse.com- Force the subvolume name to be relative (related to bsc#1073548)- 4.0.65
* Mon Jan 08 2018 ancorAATTsuse.com- Fixed error when calculating the proposal on top of a BIOS RAID (bsc#1067349)
* Fri Dec 22 2017 igonzalezsosaAATTsuse.com- AutoYaST: export the enable_snapshots element (bsc#1073544)
* Fri Dec 22 2017 snwintAATTsuse.com- rewrite SpaceMaker::resize_and_delete! to be more human-readable- 4.0.64
* Fri Dec 22 2017 snwintAATTsuse.com- fix unnecessary Windows partition deletion (bsc #1066386)- 4.0.63
* Fri Dec 22 2017 snwintAATTsuse.com- fix logic in GuidedProposal::calculate_proposal (bsc#1058027)- 4.0.62
* Fri Dec 22 2017 igonzalezsosaAATTsuse.com- Do not crash when showing an unhandled partition id (bsc#1068087)
* Wed Dec 20 2017 ancorAATTsuse.com- Partitioner: support for deleting an LVM volume group.- Correct handling of orphan physical volume devices.- Fix for bsc#106956 and part of fate#31896.- 4.0.61
* Wed Dec 20 2017 aschnellAATTsuse.com- added obsoletes (bsc#1073645)- 4.0.60
* Tue Dec 19 2017 ancorAATTsuse.com- Added BlkDevice.find_by_any_name (needed for bsc#1073254)- 4.0.59
* Tue Dec 19 2017 jreidingerAATTsuse.com- Add DeviceGraph#find_by_name call (needed for bsc#1072908)- 4.0.58
* Mon Dec 18 2017 igonzalezsosaAATTsuse.com- AutoYaST: Improve disklabel element handling (bsc#1073307).- 4.0.57
* Thu Dec 14 2017 ancorAATTsuse.com- Fixed a recently added unit test to not rely on libstorage-ng sorting. Related to bsc#1049901 and part of fate#31896.- 4.0.56
* Mon Dec 11 2017 jlopezAATTsuse.com- Partitioner: add buttons to Hard Disks section for creating new partitions and editing devices.- Part of fate#318196.- 4.0.55
* Mon Dec 11 2017 ancorAATTsuse.com- Improved how the proposal handles disks that are in use but don\'t have a partition table (directly formatted disks, disks that are direct members of an LVM or RAID, etc.). Preliminary fix for bsc#1071949 and bsc#1067670.- 4.0.54
* Mon Dec 11 2017 jlopezAATTsuse.com- Improve detection of efi and swap partitions.- bsc#1071775 and bsc#1065234- 4.0.53
* Fri Dec 08 2017 locilkaAATTsuse.com- Fixed dependencies (yast2 >= 4.0.24) (fate#318196)- 4.0.52
* Tue Dec 05 2017 igonzalezsosaAATTsuse.com- AutoYaST: assign the correct partition_id to /boot/efi (bsc#1071167)- 4.0.51
* Tue Dec 05 2017 ancorAATTsuse.com- Don\'t trust any longer the order of any collection coming from libstorage-ng (related to bsc#1049901 and part of fate#31896).- 4.0.50
* Mon Dec 04 2017 jlopezAATTsuse.com- Partitoner: added support for resizing partitions (bsc#1057586).- Part of fate#318196.- 4.0.49
* Mon Dec 04 2017 igonzalezsosaAATTsuse.com- AutoYaST does not ignore the \'enable_snapshots\' setting even if the list of partitions is missing (bsc#1070790).- 4.0.48
* Fri Dec 01 2017 ancorAATTsuse.com- Rely on the new improved mechanism of libstorage-ng to sort devices by name. Preparation for bsc#1049901 and part of fate#31896.- 4.0.47
* Fri Dec 01 2017 igonzalezsosaAATTsuse.com- Fix boot partition detection (bsc#1070621).- 4.0.46
* Fri Dec 01 2017 igonzalezsosaAATTsuse.com- AutoYaST honors \'use\' and \'initialize\' elements even if the list of partitions is missing (related to bsc#1065061).- 4.0.45
* Thu Nov 30 2017 ancorAATTsuse.com- Partitioner: added buttons to sort the devices being added to an MD RAID (part of fate#318196).- 4.0.44
* Thu Nov 30 2017 igonzalezsosaAATTsuse.com- Do not ignore start_multipath setting (bsc#1070343).- 4.0.43
* Wed Nov 29 2017 snwintAATTsuse.com- adjust list of partition ids in expert partitioner (bsc#1060993, fate#314888)- 4.0.42
* Tue Nov 28 2017 igonzalezsosaAATTsuse.com- AutoYaST: honor size=max for logical volumes (bsc#1070131).- 4.0.41
* Mon Nov 27 2017 jlopezAATTsuse.com- Allow to work with BIOS RAIDs as regular disks (bsc#1067349).- Allow to create partition table over directly formatted devices.- 4.0.40
* Mon Nov 27 2017 snwintAATTsuse.com- make PartitionTables::partition_id_supported? available- 4.0.39
* Fri Nov 24 2017 ancorAATTsuse.com- Fixed a problem when confirming the very same partitioning schema several times (bug#1069671).- 4.0.38
* Fri Nov 24 2017 igonzalezsosaAATTsuse.com- AutoYaST: safer handling of partition ids (bsc#1067207).- 4.0.37
* Thu Nov 23 2017 igonzalezsosaAATTsuse.com- AutoYaST: add support to resize partitions and logical volumes (bsc#1069505).- AutoYaST: fix detection of root partition when using LVM (bsc#1069647).- 4.0.36
* Thu Nov 23 2017 ancorAATTsuse.com- Ensure that disks considered for (auto)installation are always sorted in a stable and consistent way based on its device name. Preparation for bsc#1049901 and part of fate#31896.- 4.0.35
* Wed Nov 22 2017 jlopezAATTsuse.com- Partitioner: added support for resizing MD RAIDs.- Part of fate#318196.- 4.0.34
* Wed Nov 22 2017 shundhammerAATTsuse.com- No RAID chunk size below 64 kiB for most types of RAID (bsc#1065381)- 4.0.33
* Mon Nov 20 2017 shundhammerAATTsuse.com- Added \"Create New Partition Table\" in partitioner- Part of fate#318196.- 4.0.32
* Thu Nov 16 2017 jlopezAATTsuse.com- Improve logging: add wrapper param for guard method and dump xml representation of the devicegraph to the logs.- Part of fate#318196.- 4.0.31
* Wed Nov 15 2017 ancorAATTsuse.com- When proposing a partitions layout for installation, prefer getting big installations and arranging the partitions by their weights over creating adjacent partitions. Part of fate#318196.- 4.0.30
* Tue Nov 14 2017 jlopezAATTsuse.com- Partitioner: added support for creating volume groups.- Part of fate#318196.- 4.0.29
* Wed Nov 08 2017 snwintAATTsuse.com- safer handling of partition ids (bsc#1060993- 4.0.28
* Wed Nov 08 2017 igonzalezsosaAATTsuse.com- AutoYaST: filter out old \'AATT\' entries when importing the list of subvolumes (bsc#1061253)- 4.0.27
* Wed Nov 08 2017 ancorAATTsuse.com- Added support in the UI of the guided setup for the new format of in the control file.- Part of fate#318196.- 4.0.26
* Wed Nov 08 2017 igonzalezsosaAATTsuse.com- AutoYaST: fix space distribution when partition table does not exist (bsc#1065061)- AutoYaST: set partition tables type according to the profile- 4.0.25
* Tue Nov 07 2017 jlopezAATTsuse.com- Fix name of planned logical volumes.- Take into account real RAM size to plan volumes.- Add scenario tests using new partitioning settings.- Part of fate#318196.- 4.0.24
* Tue Nov 07 2017 igonzalezsosaAATTsuse.com- AutoYaST: adjust the list of allowed keys in skip lists (bsc#1065668)- 4.0.23
* Tue Nov 07 2017 igonzalezsosaAATTsuse.com- AutoYaST: add support for udev links in the element (bsc#1066320)- 4.0.22
* Fri Nov 03 2017 igonzalezsosaAATTsuse.com- AutoYaST: do not remove partitions that are supposed to be reused (bsc#1066398).- 4.0.21
* Fri Nov 03 2017 jlopezAATTsuse.com- Partitioner: support for deleting md raids.- Part of fate#318196.- 4.0.20
* Fri Nov 03 2017 aschnellAATTsuse.com- do not query end of region if region is empty (bsc#1066290)- 4.0.19
* Thu Nov 02 2017 igonzalezsosaAATTsuse.com- AutoYaST: query hardware information on skip lists (bsc#1065668).- AutoYaST: support multi-valued keys on skip lists.- AutoYaST: do not crash when no suitable disk for installation is found.- 4.0.18
* Wed Nov 01 2017 jlopezAATTsuse.com- Partitioner: support for deleting logical volumes.- Part of fate#318196.- 4.0.17
* Wed Nov 01 2017 igonzalezsosaAATTsuse.com- AutoYaST: do not crash when an unknown key is used in a skip list (bsc#1065670).- 4.0.16
* Tue Oct 31 2017 igonzalezsosaAATTsuse.com- AutoYaST: fix reuse of partitions (bsc#1060637).- AutoYaST: improve error handling when trying to reuse a partition fails.- AutoYaST: when a problem is detected while creating a proposal, register in which section it was found.- AutoYaST: register an issue when a proposal does not contain a root (/) partition.- 4.0.15
* Mon Oct 30 2017 ancorAATTsuse.com- Added an option in the installer to run the expert partitioner with the current storage layout as starting point.- Possible fix for bsc#1055644 and part of fate#318196.- 4.0.14
* Fri Oct 27 2017 jsrainAATTsuse.cz- Limit maximal proposed size of EFI partition (bsc#1062775)- 4.0.13
* Thu Oct 26 2017 ancorAATTsuse.com- Partitioner: small adjustments in the verifications performed before running some wizards.
* Wed Oct 25 2017 jlopezAATTsuse.com- Partitioner: allow to work with multipath devices.- bsc#1058373 and bsc#1028853.- Part of fate#318196.- 4.0.12
* Wed Oct 25 2017 igonzalezsosaAATTsuse.com- Add support to clone subvolumes when using AutoYaST (bsc#1064875)- 4.0.11
* Wed Oct 25 2017 snwintAATTsuse.de- adjust control.xml documentation- 4.0.10
* Mon Oct 23 2017 jlopezAATTsuse.com- Partitioner: show only option to create vg when there are no vgs.- Part of fate#318196.- 4.0.9
* Mon Oct 23 2017 snwintAATTsuse.de- have volumes in control.xml proposed by default (fate#318196)- 4.0.8
* Fri Oct 20 2017 jlopezAATTsuse.com- Partitioner: support for creating logical volumes.- Part of fate#318196.- 4.0.7
* Thu Oct 19 2017 igonzalezsosaAATTsuse.com- AutoYaST: add basic support for error handling- AutoYaST: handle \'size: auto\' correctly- 4.0.6
* Thu Oct 19 2017 jsrainAATTsuse.cz- During installation, mount efivarfs in /mnt/sys/firmware/efivars if present in inst-sys (bsc#1063063)- 4.0.5
* Tue Oct 17 2017 shundhammerAATTsuse.de- Terminate extra space distribution loop if nothing could be distributed anymore (bsc#1063392)- 4.0.4
* Tue Oct 17 2017 snwintAATTsuse.com- finalize control.xml description (fate#318196)- 4.0.3
* Mon Oct 16 2017 jlopezAATTsuse.com- Add strategies to try an initial valid proposal, even changing settings when necessary.- Part of fate#318196.- 4.0.2
* Tue Oct 10 2017 jlopezAATTsuse.com- Adapt proposal to work with new format of proposal settings.- Part of fate#318196.- 4.0.1
* Mon Oct 09 2017 igonzalezsosaAATTsuse.com- AutoYaST: proper handling of the \'use\' element allowing to delete a set of partitions (bsc#1061042)- AutoYaST: support for mkfs_options, fstopt and mount_by elements (bsc#1061289)- 4.0.0
* Fri Oct 06 2017 jlopezAATTsuse.com- Added support for reading new format of proposal settings.- Part of fate#318196.- 3.3.27
* Thu Oct 05 2017 ancorAATTsuse.com- Partitioner: don\'t return to the summary screen after each operation.- Partitioner: speedup the refresh time after each operation (by not querying the hostname again).- Both part of fate#318196.- 3.3.26
* Wed Oct 04 2017 shundhammerAATTsuse.de- Added disk.desktop file for partitioner (bsc#1059528)- 3.3.25
* Wed Oct 04 2017 snwintAATTsuse.com- separate planning strategies from DevicesPlanner into DevicesPlannerStrategies module- 3.3.24
* Tue Oct 03 2017 ancorAATTsuse.com- Partitioner: buttons to edit the filesystem in RAID and LVM LV.- Partitioner: correct positioning of some buttons.- Partitioner: allow to mount several swap devices.- All part of fate#318196.- 3.3.23
* Fri Sep 29 2017 ancorAATTsuse.com- Partitioner: option to create an MD RAID (part of fate#318196).- 3.3.22
* Fri Sep 29 2017 jlopezAATTsuse.com- Fix validation when trying to create a partition with custom size (bsc#1060864).- 3.3.21
* Tue Sep 26 2017 shundhammerAATTsuse.de- Implemented simple proposal for CASP (bsc#1058736)- 3.3.20
* Mon Sep 25 2017 snwintAATTsuse.de- updated installer hacks document: ssh key import works
* Fri Sep 22 2017 jlopezAATTsuse.com- Avoid to reuse small efi partitions (bsc#1056640).- 3.3.19
* Thu Sep 21 2017 ancorAATTsuse.com- More backwards-compatible behavior when formatting partitions in the expert partitioner.- Checkbox to enable snapshots for \"/\" in the expert partitioner.- Both part of fate#318196- 3.3.18
* Tue Sep 19 2017 ancorAATTsuse.com- Improved creation and modification of partitions in the Expert Partitioner (bsc#1057869, bsc#1057874).- Added button to define the Btrfs subvolumes directly during creation or modification.- 3.3.17
* Wed Sep 13 2017 jreidingerAATTsuse.com- add all full udev links and helper to list them all (useful for fixing bsc#1057604)- 3.3.16
* Wed Sep 13 2017 snwintAATTsuse.com- don\'t limit uefi to x86_64 (bsc#1056629)- 3.3.15
* Tue Sep 12 2017 jlopezAATTsuse.com- Fix proposal to not try to create more than 3 partitions in a DASD partition table (bsc#1058052).- 3.3.14
* Thu Sep 07 2017 schubiAATTsuse.de- AutoYaST: Temporary workaround to avoid crash when size \'auto\' (which is still not supported) is used (bnc#1056182).- 3.3.13
* Thu Sep 07 2017 jlopezAATTsuse.com- Fix partitioner bug creating partition with custom size (bsc#1057049)- 3.3.12
* Thu Sep 07 2017 ancorAATTsuse.com- AutoYaST: support for Btrfs snapshots (part of fate#318196).- 3.3.11
* Wed Sep 06 2017 jlopezAATTsuse.com- Fix bug when formatting with expert partitioner (bsc#1057405).- 3.3.10
* Wed Sep 06 2017 igonzalezsosaAATTsuse.com- Ignore case when parsing sizes (bsc#1056715 and bsc#1055913).- 3.3.9
* Tue Sep 05 2017 schubiAATTsuse.de- AutoYaST: Handle sizes without unit correctly. (bnc#1056168)- 3.3.8
* Tue Sep 05 2017 ancorAATTsuse.com- Create Btrfs in the guided setup if requested to do so (part of fate#318196).- 3.3.7
* Wed Aug 30 2017 jlopezAATTsuse.com- Added overall summary for the expert partitioner.- Part of fate#318196- 3.3.6
* Wed Aug 23 2017 jlopezAATTsuse.com- Added methods to save user data into libstorage-ng objects.- Added subvolume shadowing control to the expert partitioner.- Added mount point validation to the expert partitioner.- Removed Planned::BtrfsSubvolume class.- Part of fate#318196- 3.3.5
* Mon Aug 21 2017 knut.anderssenAATTsuse.com- Added support for legacy filesystems (fate#323394).- 3.3.4
* Mon Aug 21 2017 snwintAATTsuse.de- adjust package description in spec file
* Mon Aug 21 2017 ancorAATTsuse.com- When displaying partition ids to the user, use names that are more similar to old yast-storage (part of fate#318196).- 3.3.3
* Fri Aug 18 2017 knut.anderssenAATTsuse.com- ReiserFS is not allowed anymore, it was already removed in SLE 12 for new installations and was only supported for upgrades. (fate#323394)- 3.3.2
* Wed Aug 16 2017 ancorAATTsuse.com- Added deactivation of virtual devices (multipath, LVM, etc.) to the public API.- Initial management of Btrfs subvolumes in the expert partitioner.- Both as part of fate#318196- 3.3.1
* Mon Jul 24 2017 jlopezAATTsuse.com- Removed temporary StorageManager API.- 0.1.32
* Thu Jul 20 2017 ancorAATTsuse.com- Added pop-up to ask the user about multipath activation.
* Thu Jul 20 2017 ancorAATTsuse.com- Added Btrfs subvolumes support to the AutoYaST customized partitioning.
* Tue Jul 18 2017 ancorAATTsuse.com- Adjusted the guided proposal to work properly on scenarios with DM RAIDs.
* Mon Jul 17 2017 ancorAATTsuse.com- Adjusted the guided proposal to work properly on scenarios with Multipath I/O.
* Wed Jul 12 2017 ancorAATTsuse.com- Replaced the original prototype of the expert partitioner with the one coming from yast2-partitioner.- Added #supported_fstab_options and #default_partition_id methods to Y2Storage::Filesystems::Type.- Removed Y2Storage::DevicesLists and not longer needed modules from Y2Storage::Refinements- 0.1.31
* Tue Jul 11 2017 jreidingerAATTsuse.com- Added PartitionId#to_human_string and PartitionId::formattable?- 0.1.30
* Thu Jul 06 2017 gsouzaAATTsuse.com- Added verifications for disk in network.- 0.1.29
* Tue Jul 04 2017 jlopezAATTsuse.com- Added new class Y2Storage::Proposal::Base.- Proper assignment of default values for new proposals.- 0.1.28
* Tue Jul 04 2017 ancorAATTsuse.com- Added AutoinstProfile::PartitioningSection which allows to export the current system (or any other devicegraph) to an AutoYaST profile (only plain partitions supported so far).- 0.1.27
* Mon Jul 03 2017 jlopezAATTsuse.com- Adapt proposal to different situations (disable home, snapshots, etc)- 0.1.26
* Mon Jul 03 2017 jreidingerAATTsuse.com- add LvmVg#basename- add PartitionTables::Base#delete_all_partitions- add logger to all devices- add LvmVg#name- 0.1.25
* Tue Jun 27 2017 igonzalezsosaAATTsuse.com- Add LVM support for AutoYaST partitioning (bsc#1044697).- 0.1.24
* Tue Jun 27 2017 ancorAATTsuse.com- More robust Y2Storage::StorageManager#probe
* Mon Jun 26 2017 jreidingerAATTsuse.com- Added Y2Storage::MdParity#to_human_string and Y2Storage::MdLevel#to_human_string- 0.1.23
* Mon Jun 26 2017 aschnellAATTsuse.com- Added Y2Storage::Md wrapper- 0.1.22
* Mon Jun 19 2017 mvidnerAATTsuse.com- Added Y2Storage::DiskSize#human_floor, Y2Storage::Region#size- 0.1.21
* Mon Jun 19 2017 igonzalezsosaAATTsuse.com- AutoinstProposal is loaded with the rest of the proposal classes when \'y2storage\' is required.- 0.1.20
* Mon Jun 19 2017 jilopezAATTlocalhost- Adjustments to DASD to ensure the proposal works as expected in such devices.- Added Devicegraph#disk_devices to get all DASDs and disks.- DASD support added to YAML reader and writer.
* Fri Jun 16 2017 igonzalezsosaAATTsuse.com- Add basic support for AutoYaST customized partitioning (only plain partitions are supported)- 0.1.19
* Thu Jun 15 2017 jreidingerAATTsuse.com- Add new method StorageManager.fake_from_xml for easy loading of xml device graphs
* Wed Jun 14 2017 aschnellAATTsuse.com- added probe function to StorageManager- 0.1.18
* Thu Jun 08 2017 ancorAATTsuse.com- Added new method BlkDevice#to_be_formatted? (needed by yast2-partitioner).- 0.1.17
* Tue Jun 06 2017 shundhammerAATTsuse.de- Don\'t insist on installing filesystem support packages that are not available in any repo (bsc#1039830)- 0.1.16
* Thu Jun 01 2017 ancorAATTsuse.com- Fixed a bug in LvmLv#stripe_size=
* Mon May 22 2017 ancorAATTsuse.com- Refactored the proposal code in preparation for the AutoYaST implementation. Removed PlannedVolume and PlannedVolumesList classes in favor of new more specific classes in the Planned namespace.- Fixed the proposal to never propose subvolumes that would be shadowed by another proposed device.
* Wed May 17 2017 jreidingerAATTsuse.com- Add to Y2Storage::PartitionTables::Type#to_human_string- 0.1.15
* Thu May 04 2017 schubiAATTsuse.de- Added SCR agent .etc.mtab again until we have a proper alternative for it (still needed in yast2-users).- 0.1.14
* Thu May 04 2017 ancorAATTsuse.com- Changelog entry to document stuff that was left behind. See below.- Installation proposal now generates Btrfs subvolumes when needed (according to control.xml and a fallback list).- Improved and fully functional Guided Setup.- Added new fields to ProposalSettings and renamed others (xxx_size instead of xxx_disk_size). Similar changes in PlannedVolume.- New smaller and more convenient API for DiskAnalyzer.- Many documentation (Yardoc) improvements and fixes.- Added dummy activate callbacks (for activating a previous LUKS).- The installer now saves a xml representation of the probed and staging devicegraphs before proceeding with the installation.- New API for accessing the libstorage objects from Ruby:
* New classes in the Y2Storage namespace offering a wrapper around the corresponding libstorage classes and enums: Actiongraph, AlignPolicy, BlkDevice, BtrfsSubvolume, Dasd, DasdFormat, DasdType, DataTransport, Device, Devicegraph, Disk, Encryption, LvmLv, LvmPv, LvmVg, Mountable, Partition, PartitionId, PartitionType, Partitionable, Region and ResizeInfo.
* Mixins StorageClassWrapper and StorageEnumWrapper to define more wrappers as needed.
* Removed EnumMappings.
* Removed most refinements in Y2Storage, functionality moved to the new classes.
* Marked DevicesList as deprecated.
* Marked some refinements as deprecated.
* Tue Apr 25 2017 jreidingerAATTsuse.com- add Gpt#pmbr_boot(?/=) methods for protective MBR- 0.1.13
* Thu Mar 23 2017 jilopezAATTlocalhost- Adapted prepdisk client to work in update mode.
* Tue Mar 21 2017 schubiAATTsuse.de- Added to_s in ProposalSettings
* Thu Mar 09 2017 ancorAATTsuse.com- Partially adjust the proposal settings according to control.xml.
* Fri Mar 03 2017 ancorAATTsuse.com- Improved the EnumMappings module.- 0.1.12
* Thu Feb 16 2017 ancorAATTsuse.com- Improvements in the devicegraph query interface: added an EncryptionLists class and adapted all the other classes to take several encryption-related scenarios into account.- 0.1.11
* Wed Feb 08 2017 ancorAATTsuse.com- Added a prototype of the \"Guided Setup\" wizard to configure the proposal settings.
* Wed Jan 25 2017 ancorAATTsuse.com- Proper management of completely empty disks (no partition table, no file-system and no LVM PV) in the proposal.- Improved FreeDiskSpace and Disk#free_spaces to correctly handle disks without partition table.- 0.1.10
* Thu Jan 19 2017 shundhammerAATTsuse.de- Install storage-related software packages as needed: Migrated UsedStorageFeatures to storage-ng and added PackageHandler- 0.1.9
* Tue Jan 17 2017 ancorAATTsuse.com- Improved StorageManager that complies to the Singleton pattern and includes a revision counter for the staging devicegraph.- 0.1.8
* Mon Jan 16 2017 ancorAATTsuse.com- Added \'fstab_options\' key to the YAML representation of the devicegraphs used for testing.- 0.1.7
* Thu Jan 05 2017 ancorAATTsuse.com- Y2Storage::DiskAnalyzer - distinguish disks with no MBR gap (0 bytes gap) from cases where the MBR gap is not applicable. This fixes the proposal for some LVM scenarios with legacy boot.
* Fri Dec 23 2016 ancorAATTsuse.com- Removed unused ProposalDemo client (kind of obsoleted by Dialogs::InstDiskProposal)
* Wed Dec 21 2016 ancorAATTsuse.com- Improvements in the devicegraph query interface (DisksLists#with_name_or_partition)- 0.1.6
* Tue Dec 20 2016 ancorAATTsuse.com- Fixed partitioning proposal to not fail when trying to create very small partitions (like bios_boot), to work better with uneven spaces (not divisible by the minimal grain) and to reduce the gaps between partitions.
* Wed Dec 14 2016 ancorAATTsuse.com- Write more precise information in the logs (DiskSize#to_s)
* Tue Dec 13 2016 ancorAATTsuse.com- Proposal does not try to set the boot flag if not supported (for example, GPT partition tables)
* Fri Dec 09 2016 aschnellAATTsuse.com- Adapted to several changes in libstorage-ng
* Fri Nov 25 2016 ancorAATTsuse.com- Improvements in the LVM-based proposal
* Tue Nov 22 2016 ancorAATTsuse.com- Improvements in Refinements::DevicegraphLists
* Tue Nov 22 2016 ancorAATTsuse.com- Convenience method to check for GPT- Several methods added to most of the DevicesLists classes- 0.1.5
* Thu Oct 27 2016 ancorAATTsuse.com- Better management of LVM partitions in Proposal::SpaceMaker
* Thu Oct 27 2016 aschnellAATTsuse.com- mount special filesystems in target during installation
* Wed Oct 26 2016 ancorAATTsuse.com- LVM classes added to Refinements::DevicegraphLists
* Wed Oct 12 2016 cwhAATTsuse.com- Use own textdomain (storage-ng instead of storage) (bsc#1004050)- 0.1.4
* Fri Sep 30 2016 ancorAATTsuse.com- Added new inst_prepdisk client - first version in which the installer commits the changes to the target disk(s).- 0.1.3
* Tue Sep 27 2016 ancorAATTsuse.com- More reusable DiskAnalyzer.- Use libstorage mechanisms to check for windows partitions.- Added new minimalistic inst_disk_proposal client.- 0.1.2
* Mon Aug 01 2016 ancorAATTsuse.com- Namespaces adapted to avoid conflicts with old yast2-storage and to follow the new YaST convention.- 0.1.1
* Thu Feb 25 2016 aschnellAATTsuse.com- initial package with yast2-storage-ng, successor of yast2-storage