Changelog for libdmmp-devel-0.7.9+195+suse.16740c5-lp151.2.12.1.x86_64.rpm :

* Mon Nov 02 2020 Martin Wilck - Avoid reading files extensions other than \".conf\" from config dir (bsc#1162896; added this note retroactively, it was already solved in multipath-tools-0.7.9+195+suse.16740c5).- Fix wrong usage of \"%service_del_preun -n\" in spec file (bsc#1178354)
* Thu Sep 17 2020 mwilckAATTsuse.com- Update to version 0.7.9+195+suse.16740c5:- Added verifed bug fixes
* kpartx: recognize DASD on loop devices again (bsc#1139775)
* kpartx.rules: fix handling of synthetic uevents (bsc#1161923)
* libmpathpersist: limit PRIN allocation length to 8192 bytes (bsc#1165786)
* Fix handling of incompletely initialized udev devices (bsc#1172157)
* avoid data corruption caused by duplicate alias in bindings file (bsc#1172429)
* improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064)
* Fix handling of hardware properties for maps without paths (bsc#1176644)-- Backported upstream fixes (bsc#1176670):
* multipath-tools: add HPE MSA 1060/2060 to hwtable
* ALUA support for PURE FlashArray
* libmultipath: EMC PowerMax NVMe device config
* libmultipath: fix ALUA autodetection when paths are down
* Fri Sep 06 2019 mwilckAATTsuse.com- Update to version 0.7.9+167+suse.07c42ab:
* Fix premature path reinstantiation with san_path_err_XX (boo#1149319)
* Wed Aug 21 2019 Martin Wilck - Set default for \"enable_foreign\" to \"NONE\" (bsc#1139837)
* added libmultipath-set-enable_foreign-to-NONE-by-default.patch
* Thu Aug 15 2019 mwilckAATTsuse.com- Update to version 0.7.9+166+suse.1693c88:
* multipath.conf.5: document foreign library support
* multipath.conf: add \"enable_foreign\" parameter (bsc#1139837)
* Tue Jul 02 2019 mwilckAATTsuse.com- Update to version 0.7.9+164+suse.e41fbd9:
* libmultipath: trigger uevents for partitions, too (bsc#1140146)
* Tue Jul 02 2019 Martin Wilck - Spec file: backported some modernizations from Factory
* Remove unused /var/cache/multipath directory
* Remove check for multipath maps in %pre and %post
* Remove SLE11-specific multipathd service stop / start from %pre / %post
* Remove obsolete tools from package description (bsc#1129827)
* Add -n to %service_del_{pre,post}un for multipathd.socket
* Tue Jun 25 2019 mwilckAATTsuse.com- Update to version 0.7.9+163+suse.7993fed:
* mpathpersist: optimize for setups with many LUNs (bsc#1134648)
* mpathpersist: add option -f/--batch-file (bsc#1134648)
* libmultipath: get_prio(): really don\'t reset prio for inaccessible paths (bsc#1118495)- Upstream bug fixes from dm-devel (bsc#1139369):
* multipath: call store_pathinfo with DI_BLACKLIST
* multipathd: fix REALLOC_REPLY with max length reply
* libmultipath: make vector_foreach_slot_backwards work as expected
* multipathd: fix client response for socket activation (bsc#1133861)- hwtable: add Lenovo DE series (bsc#1125507)
* Thu May 02 2019 mwilckAATTsuse.com- Update to version 0.7.9+148+suse.5179c8d:
* fix compilation of external programs with -lmultipath (bsc#1133957)
* Tue Apr 30 2019 mwilckAATTsuse.com- Update to version 0.7.9+147+suse.689dcaf:
* Avoid deadlock situation during udev settle (bsc#1131789, bsc#1125145) - multipath -u: test socket connection in non-blocking mode
* Avoid device IO in \"multipath -u\" (bsc#1125145)
* Fix priority handling for offline paths (bsc#1118495)
* Fix daemon shutdown issues (bsc#1110060, bsc#1110439) - multipathd: protect all access to running_state - multipathd: allow shutdown during configure()
* Thu Mar 14 2019 Martin Wilck - Disable kmod()-style dependencies for now (bsc#1119414)
* Thu Mar 07 2019 Martin Wilck - Fix module name in multipath.conf (bsc#1119414)
* The modules-load.d entry must match the filename exactly
* Tue Mar 05 2019 Martin Wilck - Add kmod(xyz) style dependencies for SLE15-SP1 (jsc#SLE-3853, fate#326579, bsc#1119414)
* Tue Mar 05 2019 mwilckAATTsuse.com- Update to version 0.7.9+128+suse.ae29865:- Bug fixes:
* multipathd: Fix miscounting active paths (bsc#1125043)
* multipathd: avoid null pointer dereference in LOG_MSG (bsc#1127873)
* minor fixes suggested by coverity (bsc#1127879)
* Fri Jan 11 2019 Martin Wilck - Add BuildRequires on suse-module-tools
* we need it for regenerate_initrd_posttrans
* Wed Jan 09 2019 mwilckAATTsuse.com- Update to version 0.7.9+111+suse.b4232b7:- merged upstream cb4a979a (SUSE bug fixes merged upstream, code-identical to previous release).
* Tue Jan 08 2019 mwilckAATTsuse.com- Update to version 0.7.9+109+suse.203c1cf:
* multipathd: avoid crash in cli_list_path (bsc#1121134)
* libmultipath: fix compilation with older kernel headers (bsc#1121066)- merged upstream fb824725
* Improved NVMe support in both native and dm-mpath mode added basic NVMe ANA support (bsc#1119898, bsc#1118495)
* Fix prio output in \"multipathd show topology\" (bsc#1119897)
* multipathd: fix daemon not really shutdown (bsc##1110060, bsc#1110439)
* setup_map: wait for pending path checkers to finish (bsc#1118224)
* Fri Dec 14 2018 mwilckAATTsuse.com- Update to version 0.7.9+90+suse.f81e290:
* libmultipath: Increase SERIAL_SIZE to 128 bytes (bsc#1107179)
* Wed Dec 12 2018 mwilckAATTsuse.com- Update to version 0.7.9+89+suse.df77b66:- re-enable \"san_path_err_xy\" options These have been removed upstream, but they were supported in SLE-15/Leap15.0, so we can\'t simply throw them away. Improve documentation, mark them as deprecated, but keep the code in place.
* Wed Dec 12 2018 mwilckAATTsuse.com- Update to version 0.7.9+85+suse.766b95e:
* upstream patch series to make verbosity level 3 less verbose and thus better usable (bsc#1118937)
* fix for handling device size mismatch in coalesce_paths() (bsc#1037379)
* libmultipath: fix false removes in dmevents polling code (bsc#1116272)
* Spec file: remove build dependency on dracut which causes build errors for some distributions
* Mon Nov 26 2018 mwilckAATTsuse.com- Update to version 0.7.9+58+suse.0790830:
* libmpathpersist: fix off-by-one error in PRIN length check (bsc#1099007)
* multipathd: fix mpp->hwe handling when paths are freed (fix possible crash caused by new hardware table code)
* Wed Nov 14 2018 mwilckAATTsuse.com- Update to version 0.7.9+55+suse.9fc8439: (note the \"55\" is due to former merge operations. We actually only have 7 patches on top of upstream. All other patches referenced below as \"not upstream\" have been merged).
* Bump version to 0.7.9
* multipathd: reset delay_wait_checks counter on failure (bsc#1114771)
* multipathd: fix irritating \"minor number mismatch\" message (bsc#1111116)
* fix possible failure to shut down (bsc#1110060, bsc#1110439)
* upstream \"checker overhaul\" - cleanups and improvements for path checkers
* Upstream fixes for failures handling path initializiation
* various small upstream bug fixes.
* Wed Oct 03 2018 mwilckAATTsuse.com- Update to version 0.7.7+136+suse.19bb285: Bug fixes from upstream, and SUSE bug fixes
* multipathd: try SCSI persistent reservations for SCSI only (bsc#1108875)
* libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458)
* libmultipath: Fixup updating paths (bsc#1110418)
* multipathd: fix memory leak on error in configure (bsc#1110418)
* multipathd: minor fixes (bsc#1110418)
* multipathd: function return value tweaks (bsc#1110418)
* multipath: fix max array size in print_cmd_valid (bsc#1110418)
* libmutipath: don\'t use malformed uevents (bsc#1110418)
* libmultipath: fix null dereference int alloc_path_group (bsc#1110418)
* libmultipath: fix memory issue in path_latency prio (bsc#1110418)
* libmultipath: fix length issues in get_vpd_sgio (bsc#1110418)
* multipathd: decrease log level of uevent messages (bsc#1110586)
* multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587)
* libmultipath: pathinfo: skip hidden devices (bsc#1110586)
* libmultipath: nvme: shorter topology output (bsc#1082419)
* libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112)
* libmultipath: fix gcc 8.1 \"truncated output\" warnings (bsc#1099007)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)- Update to upstream 1a8625abd (0.7.7+82)
* minor fixes for kpartx, found by coverity
* mpathpersist: add --param-alltgpt option
* libmultipath: add \"protocol\" blacklist option.
* multipathd: add new wildcard \"%P\" for \"protocol\"
* multipath-tools: fix products names in hwtable
* libmultipath: more debug output in alua prioritizer (bsc#1080965)
* libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION (bsc#1080965)
* libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)
* Mon Jul 02 2018 mwilckAATTsuse.com- Update to version 0.7.7+75+suse.6287aef: Added minor updates from upstream
* multipath-tools: add info about how to enable ALUA in ONTAP
* multipath-tools: add directio path_checker for DASD devices
* multipath-tools: make Product Name mandatory and add all of them Minor rebase, as some SUSE patches have been merged upstream (all mentioned in previous changelogs)
* Fri Jun 29 2018 mwilckAATTsuse.com- Update to version 0.7.7+72+suse.4b24466:
* multipath: fix return code handling in delegate_to_multipathd (bsc#1098177)
* multipath: don\'t start multipathd unnecessarily (bsc#1098177)
* Mon Jun 25 2018 mwilckAATTsuse.com- Update to version 0.7.7+70+suse.4a5941e:
* libmultipath: change partition_delimiter default to \"-part\" (bsc#1073622, bsc#1056526)
* change default for find_multipaths to \"greedy\" (bsc#1099054)
* libmultipath: allow distributions to change partition_delim default (bsc#1073622, bsc#1056526)
* Mon Jun 25 2018 mwilckAATTsuse.com- Update to version 0.7.7+67+suse.a7d1e14:- RBD/RADOS backend support has been removed upstream remove support for it in SUSE, too (boo#1099037, FATE#826853)
* added Obsoletes: for multipath-tools-rbd.- libdmmp version has changed to 0.2.0- New patches not yet upstream: (Wed Jun 12 2018: these are now upstream, since 0.7.8)
* multipathd: fix mpp->hwe handling on path removal (boo#1099028)
* libmultipath: print correct default for delay_
*_checks (boo#1099026, bsc#1110418)
* libmultipath: avoid error messages from RDAC check (bsc#1108728, bsc#1075539)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007)
* multipathd: fix buffer size in cli_getprkey (bsc#1099028)
* libmultipath: fix gcc 8.1 \"truncated output\" warnings (bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)- SUSE specific patches preserved:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
* kpartx: create symlinks for dmraid devices (bsc#1064212)
* multipath.conf.5: document no_partitons compat support (fate#323406)
* libmultipath: compat support for \'features \"1 no_partitions\"\' (fate#323406)
* Added fossology assessment as README.licenses (bsc#1088801)- Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0):
* libmultipath: don\'t [un]set queue_if_no_path after domap obsoleted by \"libmultipath: cleanup features handling code\"
* multipath.rules: use -i flag to multipath obsoleted by path detection patch series
* libmpathpersist: add support for prkeys file v3 obsoleted by \"mpathpersist: Fix invalid condition check\"
* libmultipath: fix deadlock in tur.c obsoleted by \"libmultipath: fix tur checker locking\"
* checkers/rbd: missing pthread_lock() on failure path obsolete because of RBD removal
* libmultipath/hwtable: don\'t hard-code ALUA for IBM IPR obsoleted by \"libmultipath: hwhandler auto-detection for ALUA\" and \"libmultipath: don\'t reject maps with undefined prio\" (bsc#1085212, bsc#1075129)- Update to upstream version 0.7.7+50 (39ad8dc8)- rework of \"find_multipaths\" logic
* find_multipaths can now be \"strict\", \"yes\", \"no\", \"greedy\", or \"smart\"
* SUSE default is \"greedy\" for now, consistent with previous behavior
* \"multipath -u -i\" not necessary in udev rules any more (removed SUSE patch \"multipath.rules: use -i flag to multipath\")- patch series for config file handling (bsc#1067789):
* fix inconsistent handling of multiple config file entries matching the same device (bsc#1067789)
* multipath: implement \"multipath -T\" (bsc#1067789)
* multipathd: implement \"show config local\" (bsc#1067789)
* libmultipath: merge \"multipath\" config sections by wwid
* multipathd: add path format wildcard \"%0\" for failures
* libmultipath: config parser: Allow \'\"\' in strings- multipath-tools: foreign/NVME implementation (bsc#1082419) for native NVME multipath configurations- Other new upstream features:
* mpathpersist: add all_tg_pt option
* add polling dmevent handler (only one thread waiting for device-mapper events rather than one per map).
* multipath: add \"ghost_delay\" parameter
* \"marginal path\" path state checking for better handling of unstable \"shaky\" connections in a SAN. conf options \"marginal_path_err_rate_threshold\" etc, see man page. This replaces the previous \"san_path_err_threshold\" functionality.- Upstream bug fixes:
* Man page corrections and improvements for multipath.conf(5)
* libmultipath: fix memory leak in process_config_dir() (bsc#1110352)
* multipath: don\'t check timestamps without a path
* multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* libmultipath: don\'t reject maps with undefined prio (bsc#1085212, bsc#1075129)
* multipathd: fix reservation_key check (bsc#1099008)
* 11-dm-mpath.rules: dont\'t run \"multipath -U\" during coldplug (bsc#1084748)
* libmultipath: hwhandler auto-detection for ALUA (bsc#1085212, bsc#1075129)
* multipath: fix rcu thread cancellation hang (bsc#1110418)
* multipathd: register threads that use rcu calls (bsc#1110418)
* multipathd: fix waiter thread cancelling
* multipathd: use nanosleep for strict timing (avoids possible races with SIGALRM)
* logging fixes:
* libmultipath: fix log_pthread processing
* libmultipath: set dm_conf_verbosity
* libmultipath: fix basenamecpy
* libmultipath: uev_update_path: update path properties
* libmultipath: uev_update_path: always warn if WWID changed
* libmultipath: get_uid: don\'t quit prematurely without udev (bsc#1108728)
* libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728)
* libmultipath: fix wrong output of \"multipath -t\"
* Introduce the libmultipath/unaligned.h header file (bsc#1099036)
* libmultipath: Fix sgio_get_vpd() (bsc#1099484)
* kpartx: Improve reliability of find_loop_by_file()
* libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is \'\\0\'-terminated
* libmultipath: enable feature disable changed wwid by default
* multipathd: add lock protection for cli_list_status
* bug fixes for \"marginal path checker\"
* multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439, bsc#1086025)
* multipath-tools: add INSPUR/MCS to hardware table
* multipath-tools: add RDAC SUN/ArrayStorage to hwtable
* multipath-tools: remove DF arrays from HP
* multipath: print sysfs state in fast list mode (bsc#1110354)
* multipathd: remove coalesce_paths from ev_add_map
* multipath: fix DEF_TIMEOUT use
* libmultipath: fix tur checker locking
* multipath-tools: handle exit signal immediately (bsc#1086025)
* multipathd: release uxsocket and resource when cancel thread (bsc#1110355)
* path latency prioritizer fixes
* multipathd.service: set TasksMax=infinity (bsc#1060616)
* multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
* multipathd.socket: add WantedBy=sockets.target
* kpartx.rules: fix by-id/scsi-
* for user_friendly_names
* multipath -C: decrease log level
* libmultipath: hwtable: no_path_retry=\"queue\" for NetApp NVMe
* libmultipath: hwtable: multibus for NetApp NVMe-FC
* libmultipath: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241)
* libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
* libmultipath: condlog: log to stderr (bsc#1055949)
* multipath: delegate dangerous commands to multipathdd (bsc#1047639)
* libmultipath: don\'t try to set hwhandler if it is retained (bsc#1047639)
* libmultipath: don\'t update path queueing on reload
* multipathd: marginal path code fixes
* multipath: check failed path dmstate in check_path
* multipathd: clean up set_no_path_retry
* multipathd: fix device creation issues
* libmultipath: cleanup features handling code
* multipath: fix hwhandler check in select_action
* kpartx: don\'t delete partitions from partitions
* limbultipath: prefer RDAC checker with detect_checker
* multipath-tools: add AccelStor/NeoSapphire to hardware table
* multipath-tools: add TMS/RamSan to hardware table
* multipath-tools: add XIV/NEXTRA to hardware table
* multipath-tools: add XIOtech/Magnitude to hardware table
* libmultipath: ensure checker->fd == -1 if not set
* Thu Apr 12 2018 mwilckAATTsuse.com- Update to version 0.7.3+69+suse.218a0d0:
* multipath -ll: print foreign maps only with \"-o\" flag (bsc#1089353)
* Revert \"disable nvme foreign library\"
* Thu Apr 12 2018 mwilckAATTsuse.com- Update to version 0.7.3+67+suse.8f0c27b:
* disable nvme foreign library (bsc#1089353)
* Tue Apr 10 2018 mwilckAATTsuse.com- No functional changes- Fixed rpmlint warnings (bsc#1088946)
* multipath-tools-devel: moved .so files to /usr/lib[64]
* added version dependencies for -devel packages
* Tue Apr 10 2018 mwilckAATTsuse.com- No functional changes
* fixed SPDX syntax (and -> AND)
* added /usr/share/licenses
* Tue Apr 10 2018 mwilckAATTsuse.com<- No functional changes, just licenses- Spec file: fix %license tags and info after closer inspection (bsc#1088801)
* kpartx is under GPL-2.0-only
* rbd is under LGPL-2.1-only- Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
* Added fossology assessment as README.licenses
* multipath-tools: create LICENSES dir with the text of all used licences
* Fri Apr 06 2018 mwilckAATTsuse.com- Update to version 0.7.3+61+suse.d4d0494:
* 11-dm-mpath.rules: dont\'t run \"multipath -U\" during coldplug (bsc#1084748)
* Wed Mar 28 2018 mwilckAATTsuse.com- Fixed license tags in spec file
* multipath tools / libmultipath is GPL-2.0-only
* libmpathcmd is LGPL-2.0-or-later
* libdmmp is GPL-3.0-or-later
* adopt SPDX format.
* Wed Mar 28 2018 mwilckAATTsuse.com- Update to version 0.7.3+60+suse.46ac839:
* libmultipath/hwtable: don\'t hard-code ALUA for IBM IPR (bsc#1085212, bsc#1075129)
* Wed Mar 21 2018 mwilckAATTsuse.com- Update to version 0.7.3+59+suse.1b6191c26774:
* libmultipath: don\'t reject maps with undefined prio (bsc#1085212, bsc#1075129)
* multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* Tue Mar 20 2018 mwilckAATTsuse.com- Update to version 0.7.3+57+suse.bb6be4c8b4ca:
* multipathd: fix signal blocking logic (bsc#1086025)
* multipath-tools: handle exit signal immediately (bsc#1086025)
* multipath: fix DEF_TIMEOUT use (bsc#1086014)
* multipath-tools: foreign/NVME implementation v2 (upstream accepted) (bsc#1082419)
* Mon Feb 26 2018 mwilckAATTsuse.com- Update to version 0.7.3+53+suse.140f4937e9e7:
* libmultipath: fix wrong output of \"multipath -t\" (bsc#1082835)
* Thu Feb 22 2018 mwilckAATTsuse.com- Update to version 0.7.3+52+suse.08a969b7fce0:- Add limited support for displaying native NVMe multipath (bsc#1082419)
* libmultipath: foreign/nvme: implement path display
* multipathd: use foreign API
* multipath: use foreign API
* libmultipath/foreign: nvme foreign library
* libmultipath/print: add \"%G - foreign\" wildcard
* libmultipath: API for foreign multipath handling
* libmultipath: print: use generic API for get_x_layout()
* libmultipath: print: convert API to generic data type
* libmultipath: \"generic multipath\" interface
* libmultipath: add vector_convert()
* libmultipath: add vector_free_const()
* libmultipath: get rid of selector \"hack\" in print.c- Fix locking errors detected by coverity check (bsc#1082418)
* checkers/rbd: missing pthread_lock() on failure path
* libmultipath: fix deadlock in tur.c
* Mon Feb 12 2018 mwilckAATTsuse.com- Fix whitespace in dracut conf file (bsc#1080562)
* Tue Jan 30 2018 mwilckAATTsuse.com- Update to version 0.7.3+38+suse.a16beed5280a:
* kpartx: don\'t delete partitions from partitions (bsc#1078362)
* hwtable: add latest updates (bsc#1078363)
* multipathd.service: set TasksMax=infinity (bsc#1060616)
* Fri Jan 26 2018 mwilckAATTsuse.com- Update to version 0.7.3+31+suse.6804bb73f72d:
* libmultipath: hwtable: no_path_retry=\"queue\" for NetApp NVMe (bsc#1073319)
* Fri Jan 19 2018 mwilckAATTsuse.com- Update to version 0.7.3+30+suse.6b5ed839:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
* libmultipath: ignore natively multipathed NVME devices (bsc#1076828)
* multipath.rules: handle NVME devices (bsc#1076828)
* FIX \"libmultipath: hwtable: multibus for NetApp NVMe-FC\" (bsc#1073319)
* libmultipath: increase path product_id/rev field size for NVMe (bsc#1073319)
* Tue Jan 16 2018 mwilckAATTsuse.com- Update to version 0.7.3+25+suse.7c9920e2:
* assemble_map: no newline at end of params string (bsc#1072253)
* Thu Jan 11 2018 mwilckAATTsuse.com- Update to version 0.7.3+24+suse.703a61d5:
* multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
* libmultipath: hwtable: multibus for NetApp NVMe-FC (bsc#1073319)
* libmultipath/propsel: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241)
* libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
* libmultipath: sgio_get_vpd: add page argument (bsc#1055949)
* libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)
* Fri Dec 22 2017 mwilckAATTsuse.com- Update to version 0.7.3+19+suse.0fd18bdd:
* multipathd.socket: add WantedBy=sockets.target (bsc#1072253)
* Fri Dec 22 2017 mwilckAATTsuse.com- Update to version 0.7.3+18+suse.8c97f433:
* multipath -C: decrease log level (bsc#1072504)
* Fri Dec 22 2017 mwilckAATTsuse.com- Update to version 0.7.3+17+suse.cac42e6f:
* test-kpartx: add test for mapping without UUID (bsc#1074013)
* Wed Nov 29 2017 mwilckAATTsuse.com- Update to version 0.7.3+15+suse.570d5938:
* kpartx.rules: fix by-id/scsi-
* for user_friendly_names (bsc#1066893)
* Mon Nov 20 2017 mwilckAATTsuse.com- Update to version 0.7.3+14+suse.da06e7f3:
* libmultipath: fix return code of sysfs_get_timeout (bsc#1069037)
* Mon Nov 06 2017 mwilckAATTsuse.com- added sample code for libmpathpersist (bsc#1066376)
* added libmpathpersist-example.c- multipath-tools.spec: package libmultipath.so symlink in -devel package (bsc#1066376). We
*do not
* package header files for libmultipath, as the APIs are not public.
* Fri Nov 03 2017 mwilckAATTsuse.com- multipath-tools.spec: package
*.so symlinks in -devel pkgs (bsc#1066376)- multipath-tools.spec: SLE15: add RADOS support for s390x (bsc#1066380)- Fix build error for targets SLE_12, SLE_12_SP1 (bsc#1066392)
* Thu Oct 26 2017 mwilckAATTsuse.com- Update to version 0.7.3+13+suse.db431514080f:
* kpartx: create symlinks for dmraid devices (bsc#1064212)
* limbultipath: prefer RDAC checker with detect_checker (bsc#1055949)
* Tue Oct 17 2017 hareAATTsuse.com- Update to version 0.7.3+11+suse.4de08d96:
* libmultipath: condlog: log to stderr (bsc#1063059)
* Thu Sep 21 2017 mwilckAATTsuse.com- Update to version 0.7.3+10+suse.70ccb55b0439:- Rebase to upstream release 0.7.3
* libmultipath: add pthread_cleanup hook for udev monitor
* libmultipath: pull functions into util.c
* libmultipath: change reservation_key to a be64
* libmpathpersist: fix update_prflag code
* multipath: add alternate reservation_key method
* mpathpersist: add support for prkeys file
* multipath-tools: minor edition and corrections in multipath.conf.5
* multipath-tools: fix incorrect length for strncmp in uevent.c
* multipath-tools: clarify how to dump the multipathd config
* multipath-tools: replace \"setting: array\" with \"setting: storage device\" at multipath output
* libmultipath: sanitize fd handling
* multipath-tools: link internal libraries before foreigns
* multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
* multipath-tools: add support for all arrays from Sun StorEdge 3000 family
* multipath-tools: add Xiotech iglu blaze arrays to hwtable
* multipath-tools: add Dot Hill/Seagate arrays to hwtable
* libmultipath: update INFINIDAT builtin config
* multipath-tools: add info about adding new hardware
* multipath-tools: Remove the limitation of IPC command reply length.
* multipath-tools: libdmmp: Improve timeout mechanism
* multipath-tools: libdmmp: New function to flush and reconfig
* Bump version to 0.7.3- minor fixes for upstream 0.7.3
* libmultipath: ensure checker->fd == -1 if not set
* libmpathpersist: add support for prkeys file v3
* multipath: add man page info for my prkey changes- Patch series for NVMe discovery and failover (bsc#1038865, bsc#1057820)
* discovery: sanitize NVMe discovery
* libmultipath/discovery: modify NVMe path states
* Add \'none\' checker
* hwtable: set \'none\' as default checker for NVMe
* Mon Sep 18 2017 mwilckAATTsuse.com- Update to version 0.7.2+49+suse.993a29b1188d:
* Revert \"11-dm-mpath.rules: Remember DM_ACTIVATION\" (boo#1059227)
* Revert \"11-dm-mpath.rules: don\'t set READY->ACTIVATION\" (boo#1059227)
* multipath: delegate using libmpathcmd (bsc#1047639)
* Mon Sep 18 2017 mwilckAATTsuse.com- split off rados support into separate multipath-tools-rbd package. This avoids pulling in the whole rados/ibverbs/rdma stack with multipath-tools. (bsc#1058504).- multipath-tools-rbd is Recommended but not Required by multipath-tools.
* Sat Sep 02 2017 mwilckAATTsuse.com- Update to version 0.7.2+44.3a8d750c: Misc bug fixes:
* multipathd: don\'t flood system with sd_notify calls (bsc#1056011)
* libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
* libmultipath: add_feature: allow only 1 feature (bsc#1055635)
* multipath: delegate dangerous commands to multipathd (bsc#1047639)
* libmultipath: fix partition_delimiter config option (bsc#1056526)
* kpartx: helper functions for name and uuid generation (bsc#1056508)
* kpartx: search partitions by UUID, and rename (bsc#1056508)
* kpartx: fix a corner case when renaming partitions (bsc#1056508)
* kpartx: -d must work with empty partition table (boo#1056599)
* kpartx: only recognize dasd part table on DASD (boo#1056599) Rework of the udev rules related to multipath and kpartx (bsc#1054363):
* libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
* libmultipath: add get_udev_device
* libmultipath: get_refwwid: use get_udev_device
* libmultipath: use const char
* in some dm helpers
* libmultipath: add DI_NOIO flag for pathinfo
* libmultipath: add dm_get_multipath
* multipath: implement \"check usable paths\" (-C/-U)
* 11-dm-mpath.rules: multipath -U for READY check
* 11-dm-mpath.rules: import more ID_FS_xxx vars from db
* 11-dm-mpath.rules: no need to test before IMPORT
* 11-dm-mpath.rules: handle new maps with READY==0
* 11-dm-mpath.rules: don\'t set READY->ACTIVATION
* 11-dm-mpath.rules: Remember DM_ACTIVATION
* multipath.rules: set ID_FS_TYPE to \"mpath_member\"
* kpartx.rules: don\'t rely on DM_DEPS and DM_TABLE_STATE
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
* kpartx.rules: improved logic for by-uuid and by-label links
* kpartx.rules: create by-partuuid and by-partlabel symlinks
* kpartx.rules: generate type-name links only for multipath devices
* kpartx.rules: fix logic for adding partitions
* multipath/kpartx rules: avoid superfluous scanning
* kpartx/del-part-nodes.rules: new udev file
* kpartx.rules: move symlink code to other files- multipath-tools.spec:
* added 68-del-part-nodes.rules to support partition deletion
* added 00-dont-del-part-nodes.rules to disable partition deletion by default on openSUSE/SLES for now.
* added 11-dm-parts.rules to kpartx package
* added dracut.conf file to make sure 11-dm-parts.rules is included in initrd
* Mon Aug 14 2017 mwilckAATTsuse.com- Update to version 0.7.2+14+suse.5721c345:
* cli_add_map: Use CMD_NONE (bsc#1053515)
* multipath-tools: link internal libraries before foreigns (bsc#1028132)
* multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in pthread (bsc#1053757)
* Fri Aug 11 2017 mwilckAATTsuse.com- Update to version 0.7.2+11+suse.448921a2:
* multipath.conf.5: document no_partitions compat support
* libmultipath: fixup compat support for \'features \"1 no_partitions\"\'
* Fri Aug 11 2017 mwilckAATTsuse.com- Dropped 67-kpartx-compat.rules (SUSE legacy).
* symlinks \"/dev/mapper/${UUID}_part${X}\" are not created any more, only \"/dev/mapper/${UUID}-part${X}\" (with \"minus\")- Dropped automatic kpartx invocation on dmraid devices (fate#323743)- Rebase to upstream multipath-tools 0.7.2:
* libmultipath: retain_attached_hw_handler obsolete with 4.3+
* multipath-tools: move up TEMPLATE in hwtable
* multipath-tools: delete libdmmp/docs/man directory in make clean
* libmultipath: fix unit to seconds in log message for checker timeout
* multipath-tools: add HPE StoreVirtual 3200 family to hwtable
* multipath-tools: add HPE MSA 2050/2052 to hwtable
* multipath-tools: add/change fujitsu arrays
* multipath-tools: check sysfs path state for NVMe/NVMf
* multipath-tools: sync third-party headers with 3.13 upstream
* multipath-tools: beautify path_latency.c code
* multipath-tools: fix format in multipath.conf.5
* libmultipath: update 3PARdata builtin config
* Bump version to 0.7.2- Update to version 0.7.2+8+suse.95e8f43e:
* libmultipath: don\'t try to set hwhandler if it is retained (bsc#1037533)
* libmultipath: don\'t [un]set queue_if_no_path after domap
* kpartx/devmapper.h: remove dm_no_partitions
* libmultipath: compat support for \'features \"1 no_partitions\"\' (fate#323406)
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG (bsc#1047180)
* kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
* kpartx.rules: skip creating by-uuid and by-label links (fate#32340)
* Thu Jul 20 2017 mwilckAATTsuse.com- Update to version 0.7.1+69+suse.3bfa5af1:
* Merge branch \'sles12-sp3-fixes\' into sles12-sp3
* libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated (bsc#1048146)
* libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052)
* libmultipath: only listen for uevents with DEVTYPE=disk (bsc#1048052)
* libmultipath: fix over-long NVME WWIDs (bsc#1048146)
* Tue Jun 27 2017 mwilckAATTsuse.com- Update to version 0.7.1+64+suse.aabe8c87:
* Updated \"no_path_retry\" patchset to v4 (minor change)
* kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092)- _service: use \"match-tag\" to refer only to offical tags
* Wed Jun 21 2017 mwilckAATTsuse.com- Update to version 0.7.1+62+suse.62a2c36e:
* kpartx: only check for \'no_partitions\' feature on dm devices (bsc#1037533)
* Revert \"kpartx: use mapname if no uuid is present\" (bsc#1037533, bsc#1033541)- \"no_path_retry\" patch series (bsc#1043027)
* libmultipath: load_config: skip setting unnecessary defaults
* libmultipath: add/remove_feature: use const char
* for feature
* libmultipath: clarify option conflicts for \"features\"
* libmultipath: merge_hwe: fix queue_if_no_path logic
* libmultipath: assemble_map: fix queue_if_no_path logic
* multipath.conf.5: document no_path_retry vs. queue_if_no_path
* multipath.conf.5: Remove ??? and other minor fixes
* libmultipath: add deprecated warning for some features settings- _service: Use \"sles12-sp3\" branch as revision, as factory and SLE12-SP3 submissions are in sync. Will be changed when factory forks off (latest at SLE12-SP3 GA).
* Tue Jun 20 2017 bwiedemannAATTsuse.com- set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages to fix build-compare (bsc#1045111)
* Wed Jun 14 2017 mwilckAATTsuse.com- Update to version 0.7.1+53+suse.07c2f6ac- kpartx patch series from upstream (bsc#1037533, bsc#1033541)
* kpartx: only check for \'no_partitions\' feature on dm devices
* kpartx: test-kpartx: new unit test program
* kpartx: remove is_loop_device
* kpartx: relax and improve UUID check in dm_compare_uuid
* kpartx: dm_remove_partmaps: support non-dm devices
* kpartx: dm_devn: return error for non-existent device
* kpartx: don\'t treat multi-linear mappings as partitions
* libmultipath: don\'t treat multi-linear mappings as partitions
* kpartx: use partition UUID for non-DM devices
* kpartx: use absolute path for regular files
* kpartx: find_loop_by_file: use sysfs
* kpartx: include sys/sysmacros.h
* Revert \"kpartx: relax check when checking for a kpartx device\"- Spec file: use new build flag for libdmmp installation (bsc#1036652), enabled by upstream fix:
* libdmmp: enable library installation in alternative directory- Other bug fixes from upstream:
* libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865)
* multipath-tools: fix compilation with gcc < 4.9
* kpartx: fix device checks
* mpath_persist: Don\'t join threads that don\'t exist
* libmultipath: fix suspended devs from failed reloads
* mpathpersist: fix one more crash possiblity- Minor upstream changes:
* multipath: Merge the DELL MD3xxx device configs
* multipath: fix up position independent code
* libmultipath: fix partition detection (bsc#1037533)
* kpartx: default to running in sync mode
* libmultipath: force udev reloads
* libmultipath: print alias with no_path_retry message
* multipathd: force reload device on all resizes
* libmultipath: refactor calls to get dm device info
* multipath-tools: document uid_attribute for NVME devices
* Makefile: Remove assignments to unused variables
* libmultipath/configure.h: Add a forward declaration
* libmpathpersist: Add two missing #include directives
* Remove mpath_reverse_8bytes_order()
* Move the declaration of mpath_mx_alloc_len to a header file
* Remove a superfluous \"extern\" keyword
* mpathpersist.8: add missing documentation for -K, -C, -l
* Thu Apr 27 2017 mwilckAATTsuse.com- spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)- spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)- Update to version 0.7.1+7+suse.3edc5f7d:
* kpartx: use mapname if no uuid is present (bsc#1033541)
* kpartx: relax check when checking for a kpartx device (bsc#1033541)
* libmpathpersist: use extern struct udev (bsc#1027188)
* kpartx: include sys/sysmacros.h (fix compilation warning)- Update to upstream version 0.7.1:
* multipath-tools: improve processing efficiency for addition and deletion of multipath devices
* uevent_can_discard: optimize devpath check
* multipathd: fix SIGUSR2 handling
* multipath-tools: clean up libdmmp/Makefile
* multipath-tools: libdmmp: Fix incorrect use of __attribute__
* multipath-tools: Remove trailing whitespaces
* multipath-tools: add missing \"-l\" flag for pthread in libdmmp/Makefile
* multipath-tools: build objects for libdmmp and libmpathpersist independently
* libdmmp: minor Makefile cleanup
* multipath-tools: remove incdir from Makefiles
* libdmmp: don\'t disconnect from multipathd twice
* multipathd: don\'t call strlen on NULL variables
* libdmmp: move libdmmp.pc install location
* multipathd: drop lock before calling uev_add_path
* multipathd: allow devices to switch from RW to RO
* libmultipath: don\'t set max_sectors_kb on reloads
* Remove a trailing tab
* multipath: fix segfault with disable_changed_wwids
* multipath-tools: amend text from multipath/multipath.conf.5
* Bump the version code and date
* multipath-tools: replace multipath configuration output
* Revert \"multipathd: set timeout for CLI commands correctly\"
* libmultipath: fix skip_kpartx support for removing maps
* Bump version to 0.7.1
* Fri Mar 24 2017 mwilckAATTsuse.com- spec file changes suggested by factory review team (bsc#1030699)
* RPM group adjustments.
* Avoid %__ macro indirections
* Thu Mar 23 2017 mwilckAATTsuse.com- Enable rados for SLES only for x86_64 and aarch64 (ceph is currently disabled on SLES on s390x and ppc64le) (bsc#1030699)- Downgrade to version 0.6.4+103+suse.bcb5d0f4:
* temporarily remove commit \"multipathd: fix SIGUSR2 handling\" until it\'s merged in official repo (bsc#1030699)
* Tue Mar 21 2017 mwilckAATTsuse.com- Spec file: disable librados for architectures for which ceph is not built- Spec file: enable librados by default for SLES12 SP3, disable it on Leap <= 42.1- Update to version 0.6.4+104+suse.ac0df678:
* multipathd: fix SIGUSR2 handling
* Fri Mar 10 2017 mwilckAATTsuse.com- Update to version 0.6.4+103+suse.bcb5d0f4:
* changed to official github repo openSUSE/multipath-tools (no changes code-wise)
* Fri Mar 10 2017 mwilckAATTsuse.com- Spec file: Added dependency on sg3_utils (boo#1028857)
* Wed Mar 01 2017 mwilckAATTsuse.com- spec file changes: optional librados and libdmmp support
* enabled by default on Factory and Leap (disable with --without-rados, --without-libdmmp)
* disabled by default on SLES12 (enable with --with-rados, --with-libdmmp)
* libdmmp0_1_0 and libdmmp-devel as separate packages
* minor fixes for RPMLINT warnings- Update to version 0.6.4+102.0119472d:
* rebased, code-wise identical to previous checkout
* Tue Feb 28 2017 mwilckAATTsuse.com- Update to version 0.6.4+102.df7d367e:
* libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays (bsc#1004858)
* Tue Feb 28 2017 mwilckAATTsuse.com- Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
* Make libdmmp build optional
* multipath.rules: use -i flag to multipath
* kpartx: create symlinks for dmraid devices
* kpartx: Add udev compability rules for SUSE
* libmultipath/checkers: make RADOS checker optional
* multipathd: fixup check for new path states (bsc#1019798)
* tur: Add pthread_testcancel() (bsc#101979)
* kpartx: sanitize delete partitions (bsc#100869)
* libmultipath: coalesce_paths: trigger uevent if nothing done (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: reload map if not known to udev (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: sysfs_attr_set_value: use const char
* (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: select_action: check special features separately (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: disassemble_map: treat aminio like assemble_map does (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: disassemble_map: skip no_path_retry check (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: setup_feature: handle \"retain_attached_hw_handler\" (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: setup_feature: print log msg if no_path_retry cant be set (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: setup_features: log msg if queue_if_no_path is ignored (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* multipathd: use weaker \"force_reload\" at startup (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* multipathd: imply -n if find_multipaths is set (bsc#1012910)
* multipath: ignore -i if find_multipaths is set (bsc#1012910)
* libmultipath: move suspend logic to _dm_flush_map (bsc#986838)
* multipath -ll: set DI_SERIAL (bsc#991432)
* libmultipath: use existing alias from bindings file (bsc#1005255)
* libmultipath/discovery: do not cache \'access_state\' sysfs attribute (bsc#1004858)
* multipathd: issue systemd READY after initial configuration (bsc#1006469)
* multipath: avoid crash when using modified configuration (bsc#1000914)
* multipathd: Set CLI timeout correctly (bsc#999061)
* libmultipath: Do not crash on empty features (bsc#994812)
* libmultipath: fall back to search paths by devt (bsc#995645)
* multipathd: set timeout for CLI commands correctly (bsc#999061)
* Invalid error code when using multipathd CLI
* multipath: do not check daemon from udev rules (bsc#986734)
* Add support for \"multipath=off\" and \"nompath\" on kernel cmdline
* multipathd: start daemon after udev trigger (bsc#98673)
* multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734)- Update to current upstream (0.6.4-65-ga2675025)
* Avoid that reloading a map sporadically triggers I/O errors
* fix udev rules for failed multipath devices
* multipathd: allow resetting stats
* multipathd: add messages on delayed path addition
* multipathd: don\'t update priority of failed paths
* libmultipath: cleanup orphan device states
* libmultipath: add detect_checker option
* kpartx: don\'t keep creating recursive partitions
* multipath-tools: Introducing multipath C API
* multipath-tools: sync valgrind.h with 3.12 upstream
* multipath-tools: add availability of service-time and queue-length to multipath.conf.5
* multipath-tools: add availability of service-time and queue-length to multipath.conf.5
* Fill NVMe specific path info
* Don\'t blacklist nvme
* multipath-tools: fix misspellings
* multipath-tools: git should ignore rej and orig files
* Include sys/sysmacros.h
* Tolerate modprobe failures in multipathd.service
* multipath-tools: Remove trailing and leading whitespaces
* multipath-tools: Perform socket client uid check on IPC commands.
* multipath-tools: Set errno mpath_recv_reply() when failure
* multipath-tools: New way to limit the IPC command length.
* multipath-tools: libmultipath: Removed unused functions.
* multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb.
* multipath-tools: multipathd: Fix memory leak on load_config().
* [multipathd] Remove trailing whitespaces
* multipathd: deterministic io throughput in multipath
* Sat Feb 18 2017 kukukAATTsuse.com- Remove superfluous PreReq for insserv and fillup
* Thu Sep 29 2016 mwilckAATTsuse.com- Update to version 0.6.2+suse20160928.8939fb6
* Thu Sep 29 2016 hareAATTsuse.de- Implement support for \'multipath=off\' and \'nompath\' kernel commandline options (bsc#1001691)
* Wed Sep 28 2016 hareAATTsuse.de- multipath: avoid crash when using modified configuration (bsc#1000914)
* Mon Sep 19 2016 hareAATTsuse.de- libmultipath: Do not crash on empty features (bsc#994812)- multipathd: Set CLI timeout correctly (bsc#999061)- Moved multipath-tools repository to github.com:/openSUSE/multipath-tools.git
* Thu Sep 08 2016 hareAATTsuse.de- Fixup glitch from patch \'fixup check from udev rules\' (bsc#986734)- Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch; integrated into git repository
* Mon Aug 29 2016 jthumshirnAATTsuse.com- libmultipath: fall back to search paths by devt (bsc#995645)
* Fri Aug 26 2016 hareAATTsuse.de- Fixup module name in /usr/lib/modules-load.d (bsc#986734)
* Fri Aug 26 2016 hareAATTsuse.de- multipath: fixup check from udev rules (bsc#986734)
* Wed Aug 24 2016 hareAATTsuse.de- multipathd: start daemon after udev trigger (bsc#986734)- Load device handler and multipath module at boot (bsc#991634)
* Fri Aug 19 2016 hareAATTsuse.de- Do not check daemon from udev rules (bsc#986734,bsc#990538)
* Fri Aug 05 2016 hareAATTsuse.de- Include fixes from upstream:
* memory leak in orphan_paths
* More hardware table cleanups
* Add \'serial\' keyword to weightedpath prioritizer- Set timeout for CLI commands correctly (bsc#990265)- Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)- multipathd.service: Fixup Wants= and Before= statements (bsc#991742, bsc#986734)
* Thu Jul 28 2016 hareAATTsuse.de- Include patches from upstream:
* Cleanup hardware tables by removing default entries
* More formatting fixes
* Order keywords in multipath.conf.5
* Change default pgpolicy from \'failover\' to \'group_by_prio\'
* kpartx: Fix check whether to detach a loop device
* Fix partly traversed loop in coalesce_paths()
* Fix memory leak in reconfigure()
* Cleanup include header files
* Bump version code to 0.6.2- Fix multipath -l without output (bsc#990480)- Fix spelling in a log message- Fix type of rcu_unregister()- Do not perform POSIX mutex operations inside a signal handler- Ensure that signals are delivered to the uxsock thread- Fix memory leak in path group policies- Update tarball to 0.6.2+suse20160728.d96f423
* Fri Jul 15 2016 hareAATTsuse.de- Include patches from upstream:
* Makefile cleanup
* Update multipath.conf.5
* Update hardware tables
* Whitespace cleanup- Fixup crash during shutdown (bsc#988539)- Update tarball to 0.6.1+suse20160715.3d44636
* Mon Jul 04 2016 jengelhAATTinai.de- Remove obsoletes spec sections
* Mon Jul 04 2016 hareAATTsuse.de- Move config accesses to use user-space RCU (bsc#987526)
* Revert \'move filter_devnode under vector lock\'
* Revert the rework patch- Include patches from upstream:
* Update hardware tables
* Update kpartx manpage
* Whitespace fixes
* Include coverity fixes
* Drop AUTHOR file- Update tarball to 0.6.1+suse20160704.6e52398
* Wed Jun 08 2016 lnusselAATTsuse.de- fix service file to not pretend that this is the upstream version. Now labeled 0.6.1+suse20160603.9b920e3- Fix BuildRequire to get systemd.pc from correct package (bsc#983167)- point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning
* Fri Jun 03 2016 hareAATTsuse.de- Rework patch \'move filter_devnode under vector lock\' (bsc#982348)
* Mon May 30 2016 hareAATTsuse.de- multipathd: Fixup definition of set_unlocked_handler_callback()- mpathcmd.h: Update Free Software Foundation address
* Fri May 27 2016 hareAATTsuse.de- Do not install header file with mode 755
* Wed May 25 2016 hareAATTsuse.de- Update to latest upstream version 0.6.1
* Merge suse-specific patches
* Drop multipath.conf.
* files
* Update to version 0.6.1
* multipathd: move \'filter_devnode\' under vector lock
* libmultipath: use poll() in uevent_listen()
* Increase kpartx retries
* Merge Dell MD3XXX hardware table entries
* multipathd: Add \'sysfs\' prioritizer (bsc#927040)
* libmultipath: call get_vpd_uid() if no uid_attribute is set
* multipathd: update defaults
* Fri May 06 2016 hareAATTsuse.de- Update to latest upstream version 0.6.0 (FATE#319406)
* Update documentation
* Fix memory leak and segfault in reconfigure
* Add wwn keyword to weightedpath prioritizer
* Use 64-bit int for command key
* check partions unused before removing
* print \'fail\' when remove fails
* add exclusive_pref_bi for alua prioritizer
* kpartx: verify parition devices
* multipathd: delay reloads during creation
* Cut down alua prioritizer ioctls
* Add \'ignore_new_boot_devs\' option
* Add libmpathcmd library and use it internally
* retrigger uevents to try and grab uid
* Update to version 0.6.0
* Fri Apr 15 2016 hareAATTsuse.de- Port to latest upstream version (FATE#319406, FATE#320255)
* kpartx: support device names with spaces
* add raw format multipathd commands
* make kpartx -d remove all partitions
* Add find_multipaths option
* Autodetect ALUA CLARiiON configurations
* Delayed path reintegration
* enable configuration directory
* read-only bindings
* Add deferred_remove support
* correctly set partition delimiter on rename
* Add overrides section to multipath.conf
* Add additional path wildcards
* Add force_sync option
* Misc small patches
* Thu Mar 24 2016 hareAATTsuse.de- multipathd: do not flush maps on startup- Use find_path_by_dev() where possible (bsc#924316)- Fixup error return in store_path() (bsc#972329)- Do not display message \'invalid fd\'
* Tue Mar 08 2016 hareAATTsuse.de- Fixup overzealous warning \'empty device number\' (bsc#969857)
* Wed Feb 17 2016 hareAATTsuse.de- multipathd: fixup signal handling (again)- Revert \'trigger all devices on startup\'- multipathd: print error message for invalid arguments- multipathd: block checkerloop during reconfiguration (bsc#946658)- libmultipath: correctly initialize pp->sg_id- multipathd: don\'t buffer output with systemd (bsc#954726)- multipath.rules: Do not forward partition events (bsc#954726)- libmultipath: improve uxlsnr handling (bsc#954726)- multipathd: do not realloc memory in uxlsnr (bsc#954726)- libmultipath: call get_uid() for all paths (bsc#935312)- multipathd: Do not print misleading message \'not found in pathvec\'- multipathd: Do not update the paths vec when removing paths- multipathd: Do not switch paths on empty multipath tables (bsc#956349)- libmultipath: remove \'get_info\' argument for adopt_paths()- libmultipath: ensure \'dev_t\' is set when store paths (bsc#924316)- libmultipath: Do not store paths with empty dev_t (bsc#924316)- libmultipath: Do not store paths with empty device name (bsc#924316)- libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588)- Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845)- multipath: Reset alias if renaming fails (bsc#943157)
* Fri Nov 06 2015 hareAATTsuse.de- Fixes for md_monitor on zFCP (FATE#319070):
* strict loop timings
* multipathd: fixup a crash when invoking CLI commands
* multipathd: implement \'show map $map format $format
* Tue Aug 25 2015 hareAATTsuse.de- Fixup hang in \'multipath -f\' (bsc#941954)
* Mon Aug 03 2015 hareAATTsuse.de- Create package for SLE12-SP1.
* Remove multipath-tools-0.5.0-sles12.diff.bz2
* Add multipath-tools-0.5.0-sles12-sp1.diff.bz2- kpartx: parse emulated DASD devices- multipathd: Fixup queueing mode in \'show maps status\' (bsc#933885)- multipathd: Accept zero-sized paths in ev_add_path- Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282)- libmultipath: Fixup \'DM_DEVICE_RELOAD\' handling (bsc#933282)- libmultipath: correctly display checker status
* Wed Apr 08 2015 hareAATTsuse.de- Remove \'udev_sync\' argument from dm_simplecmd (bsc#903001)- Ensure multipathd is started before systemd-udev-trigger
* Tue Apr 07 2015 hareAATTsuse.de- Only import ID_FS_XXX variables if not set (bsc#909358)- Fixup regular expression for HP MSA 2040 (bsc#920189)
* Wed Mar 18 2015 hareAATTsuse.de- Add dependency on systemd-udevd.service (bsc#903001)- Use ALUA for HP 3PAR (bsc#922105)- Add DX8700 S3 and DX8900 S3 defaults (bsc#921703)- Load all device handler modules on startup (bsc#908529)
* Fri Mar 13 2015 hareAATTsuse.de- libmultipath: make vpd page 0x80 optional (bsc#917963)- Add HP MSA 2040 to the hardware table (bsc#920189)- Revert \'Skip unhandled device types\' (bsc#917701)
* Thu Jan 29 2015 hareAATTsuse.de- skip uninitialized devices during reconfiguration (bnc#908915)- memory overflow when printing help text (bnc#909742)
* Tue Dec 16 2014 hareAATTsuse.de- Do not automatically fall back to vpd uid generation- Improve vpd parsing- multipathd: trigger all devices on startup (bnc#901465)- Unset \'uid_attribute\' on failure
* Wed Dec 10 2014 hareAATTsuse.de- libmultipath: Fall back to SG_IO if no UID could be assigned (bnc#908915)- Assign local priority for NAA VPD descriptor (bnc#907483)- libmultipath: finally fix dev_loss_tmo setting (bnc#889927)- libmultipath: Do not use \'sscanf\' for parsing integers (bnc#889927)- devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809)- kpartx: handle more than 256 loop devices (bnc#898427)- multipathd: fixup locking in uev_remove_map() (bnc#901891)- multipathd: use global variable for uxsock timeout (bnc#900758)- multipathd: remove unused variable in cli_reconfigure()- Add %service calls for multipathd.socket