Changelog for mdadm-3.3.4-8.el6.x86_64.rpm :
Thu Jan 26 13:00:00 2017 Xiao Ni - 3.3.4-8
- Cannot assemble IMSM array with domain policy in mdadm.conf and
RAID level migration in container with 2 arrays breaks both arrays
- Resolves bz1413937 and bz1413615

Tue Aug 9 14:00:00 2016 Jes Sorensen - 3.3.4-7
- Fix problem with mdadm trying to load container for a subarray
- Resolves bz1348925

Mon Jun 20 14:00:00 2016 Jes Sorensen - 3.3.4-6
- Fix problem with reshaping IMSM arrays, where a new reshape could be
launched before the first reshape had fully completed, leading to
unpected results.
- Resolves bz1340768

Fri Jun 17 14:00:00 2016 Jes Sorensen - 3.3.4-5
- Retry reading sync_completed state to avoid a reshape not continuing after
restarting a reshape
This is an additional patch to resolve this bug, which was identified
during the z-stream backport of this bug.
- Resolves bz1322317

Fri Jun 17 14:00:00 2016 Jes Sorensen - 3.3.4-4
- Fix problem with mdadm large device names overflowing an internal buffer,
potentially leading to segfaults.
- Resolves bz1343809

Tue May 10 14:00:00 2016 Jes Sorensen - 3.3.4-3
- Fix problem with mdadm crashing during multi-volume reshape with NVMe drives
- Resolves bz1322317

Wed Apr 27 14:00:00 2016 Jes Sorensen - 3.3.4-2
- Fix a number of issues with interrupting reshapes of IMSM RAID arrays
- Resolves bz1320211

Wed Dec 9 13:00:00 2015 Xiao Ni - 3.3.4-1
- Update to mdadm-3.3.4
- Resolves bz1248989

Tue May 19 14:00:00 2015 Jes Sorensen - 3.3.2-5
- Fix race condition when assembling IMSM volumes with mdadm -As
- Resolves bz1146994

Fri Apr 17 14:00:00 2015 Jes Sorensen - 3.3.2-4
- Fix problem where mdadm allowed the creation of more arrays than
supported by the BIOS.
- Resolves bz1211564

Tue Apr 14 14:00:00 2015 Jes Sorensen - 3.3.2-3
- Add missing patches to support IMSM RAID spanning NVMe controllers
- Resolves bz1211500

Wed Feb 11 13:00:00 2015 Jes Sorensen - 3.3.2-2
- Do not install superfluous udev rule
- Resolves bz1146536

Sat Nov 1 13:00:00 2014 Jes Sorensen - 3.3-7
- Fix problem with mdadm.conf AUTO=-all not being handled correctly
- Resolves bz1159399

Wed Sep 3 14:00:00 2014 Jes Sorensen - 3.3-6
- Fix problem with reshape of IMSM RAID arrays failing to start
- Disallow IMSM arrays spanning multiple controllers
- Fix problem with reshape failing to restart when reassembling IMSM RAID
- Resolves bz1136880, bz1136891, bz1136903

Wed Sep 3 14:00:00 2014 Jes Sorensen - 3.3-5
- Fix problem with not being able to create IMSM arrays larger than 100GiB
- Resolves bz1136868

Mon Jun 30 14:00:00 2014 Jes Sorensen - 3.3-4
- Actually apply the patch introduced in 3.3-3
- Resolves bz1113871

Mon Jun 30 14:00:00 2014 Jes Sorensen - 3.3-3
- Disable DDF support as it is not supported in RHEL
- Resolves bz1113871

Fri Apr 11 14:00:00 2014 Jes Sorensen - 3.3-2
- Fix problem with path=
* policy not working, due to lack of /dev/disk/by-path/
- Resolves bz1059193

Wed Mar 19 13:00:00 2014 Jes Sorensen - 3.3-1
- Update to mdadm-3.3
- Resolves bz1030606

Mon Mar 17 13:00:00 2014 Jes Sorensen - 3.2.6-11
- Fix problem where mdadm would crash if trying to create an IMSM array with
missing drives.
- Resolves bz1059307

Fri Mar 14 13:00:00 2014 Jes Sorensen - 3.2.6-10
- Fix problem of IMSM platform capabilities not being detected in UEFI
mode when only the second SATA controller is enabled.
- Resolves bz1075529

Thu Dec 12 13:00:00 2013 Jes Sorensen - 3.2.6-9
- Change permissions of /etc/cron.d/raid-check to 600
- Resolves bz1012505
- Avoid double close() issue reported by Coverity
- Resolves bz991041

Wed Dec 11 13:00:00 2013 Jes Sorensen - 3.2.6-8
- Work around udev sporadically not updating ID_FS_TYPE field of block
device entry in its database when array is being created.
- Resolves bz1040006

Wed Oct 9 14:00:00 2013 Jes Sorensen - 3.2.6-7
- Check for DM_UDEV_DISABLE_OTHER_RULES_FLAG instead of
DM_UDEV_DISABLE_DISK_RULES_FLAG in 65-md-incremental.rules
- Resolves bz1015514

Mon Sep 30 14:00:00 2013 Jes Sorensen - 3.2.6-6
- Fix problem with failed disks in failed RAID volume not being removed
- Resolves bz1010859

Thu Sep 26 14:00:00 2013 Jes Sorensen - 3.2.6-5
- Fix problem with rebuild not restarting on stopped RAID1/10 IMSM arrays
- Resolves bz1001627

Fri Aug 23 14:00:00 2013 Jes Sorensen - 3.2.6-4
- Fix problem with RAID10 resync failing to restart if it has been
stopped after 50% completion.
- Resolves bz995105

Thu Jul 18 14:00:00 2013 Jes Sorensen - 3.2.6-3
- Fix problem where first stop command doesn\'t stop container during
IMSM volume\'s reshape
- Fix annoying build noise caused by latest rpmbuild
- Resolves bz956016

Fri May 3 14:00:00 2013 Jes Sorensen - 3.2.6-2
- Enhance raid-check to allow the admin to specify the max number of
concurrent arrays to be checked at any given time.
- Resolves bz819943

Thu May 2 14:00:00 2013 Jes Sorensen - 3.2.6-1
- Update mdadm to upstream release v3.2.6
This includes all current patches, except for
mdadm-3.2.5-imsm-Forbid-spanning-between-multiple-controllers.patch and
mdadm-3.2.5-Create.c-check-if-freesize-is-equal-0.patch
- Fix problem with arrays marked in mdadm.conf still being
auto-assembled
- Fix problem with it not being possible to use more than
once in mdadm.conf
- Resolves bz922971
- Resolves bz902142
- Resolves bz902137

Thu May 2 14:00:00 2013 Jes Sorensen - 3.2.5-6
- Fix problem with IMSM metadata where resync progress would be lost
if an array was stopped during ongoing expansion of a RAID1/5 volume.
- Resolves bz903212

Mon Apr 29 14:00:00 2013 Jes Sorensen - 3.2.5-5
- Fix problem with IMSM RAID5 not rebuilding after reboot
- Resolves bz955972

Thu Dec 6 13:00:00 2012 Jes Sorensen - 3.2.5-4
- Fix typo in error message in fix for 880208. No code functional change
- Resolves bz880208

Wed Nov 28 13:00:00 2012 Jes Sorensen - 3.2.5-3
- Avoid corruption by prohibiting an IMSM array from spanning multiple
controllers (bz878810)
- Prevent creation of a second IMSM array of size 0 (bz880208)
- Avoid segfault when running mdadm --detail on an IMSM raid1 array
where two drives have been disabled (bz880225)
- Resolves bz878810, bz880208, bz880225

Thu Oct 4 14:00:00 2012 Jes Sorensen - 3.2.5-2
- Resolve issue with ambiguous licenses
- Resolves bz862565

Fri Aug 10 14:00:00 2012 Jes Sorensen - 3.2.5-1
- Update mdadm to upstream release v3.2.5
This includes all current patches, except for
mdadm-3.2.3-imsm-fix-correct-checking-volume-s-degradation.patch
- Resolved bz812358

Thu May 31 14:00:00 2012 Jes Sorensen - 3.2.3-11
- Fix case where reshape of IMSM RAID fails because we don\'t check the
return value when trying to read the word \'degraded\' from sysfs,
resulting in the use of random stack data.
- Resolves bz824815

Thu May 10 14:00:00 2012 Jes Sorensen - 3.2.3-10
- Fix man-page to state the correct location for the device-map file
- Resolves bz820643

Thu Apr 26 14:00:00 2012 Jes Sorensen - 3.2.3-9
- Correctly fix failure when trying to add internal bitmap to 1.0 arrays
- Resolves bz811282

Mon Apr 23 14:00:00 2012 Doug Ledford - 3.2.3-8
- The support for expanding imsm arrays/containers was accepted upstream,
update to the official patches from there
- Fix for the issue of --add not being very smart
- Fix an issue causing rebuilds to fail to restart on reboot (data
corrupter level problem)
- Reset the bad flag on map file updates
- bitmap_offset is signed, treat it as such
- Related: bz808475
- Resolves: bz808776, bz812001, bz814743, bz811282

Sat Apr 7 14:00:00 2012 Doug Ledford - 3.2.3-7
- Fix Monitor mode sometimes crashes when a resync completes
- Fix missing symlink for mdadm container device when incremental creates
the array
- Make sure when creating a second array in a container that the second
array uses all available space since leaving space for a third array
is invalid
- Validate the number of imsm volumes per controller
- Fix issues with imsm arrays and disks larger than 2TB
- Add support for expanding imsm arrays/containers
- Resolves: bz808424, bz808519, bz808492, bz808438, bz808507,
bz808475

Tue Feb 28 13:00:00 2012 Jes Sorensen - 3.2.3-6
- Fix segfault if trying to write superblock to non existing device
- Resolves: bz795751

Tue Feb 21 13:00:00 2012 Jes Sorensen - 3.2.3-5
- Fix issue with devices failing to be added to a raid using bitmaps,
due to trying to write the bitmap with mis-aligned buffers using
O_DIRECT
- Resolves: bz790394

Mon Feb 20 13:00:00 2012 Jes Sorensen - 3.2.3-4
- Fix bug where IMSM arrays stay inactive in case a reboot is
- performed during the reshape process.
- Resolves: bz730052

Thu Feb 9 13:00:00 2012 Jes Sorensen - 3.2.3-3
- Really enable fix for problem where a device fails to remove from
- an IMSM container
- Resolves: bz771332

Thu Feb 2 13:00:00 2012 Jes Sorensen - 3.2.3-2
- Fix problem where a device fails to remove from an IMSM container
- Resolves: bz771332

Thu Jan 5 13:00:00 2012 Jes Sorensen - 3.2.3-1
- Update to latest upstream mdadm-3.2.3
- Resolves: bz745802

Fri Nov 4 13:00:00 2011 Jes Sorensen - 3.2.2-9
- Fix problem where an IMSM RAID is rejected because of unexpected
attribute settings. Additional fix being extra cautious from -8.
- Resolves: bz733153

Thu Nov 3 13:00:00 2011 Jes Sorensen - 3.2.2-8
- Fix problem where an IMSM RAID is rejected because of unexpected
attribute settings.
- Resolves: bz733153

Mon Oct 24 14:00:00 2011 Jes Sorensen - 3.2.2-7
- Fix problem where a dirty IMSM RAID isn\'t assembled correctly during
boot, preventing booting from this RAID device.
- Resolves: bz692261

Wed Aug 31 14:00:00 2011 Doug Ledford - 3.2.2-6
- Fix several new coverity issues introduced by changes between the rhel6.1
and rhel6.2 mdadm package (this does not attempt to address coverity
issues that also exist in rhel6.1)
- Resolves: bz734716

Thu Aug 25 14:00:00 2011 Doug Ledford - 3.2.2-5
- Fix multiple issues in the udev incremental assembly rules file. We should
now properly support:
1) Nested md raid arrays
2) md raid arrays built on top of dm device (like LUKS encrypted devices)
3) md raid arrays build on top of dm multipath devices (we should no longer
attempt to grab the path device instead of waiting for the logical
multipath device to come live and grabbing it for our md raid usage)
- Resolves: bz598513, bz609122

Thu Aug 11 14:00:00 2011 Doug Ledford - 3.2.2-4
- Minor tweaks to wording in the comments of the /etc/sysconfig/raid-check
file
- Resolves: bz708280

Mon Aug 1 14:00:00 2011 Doug Ledford - 3.2.2-3
- Be robust when running on a version 3.0 kernel
- Properly set the default chunk size on orom devices
- Fix getinfo_super_imsm so a hack in create.c can be dropped
- Make the output of --detail more accurately communicate the state of
a device that is waiting on a resync because another resync is
already running
- A few tweaks to the man page for mdadm to clarify usage in relation to
imsm arrays
- Resolves: bz727216, bz727207, bz727210, bz727212, bz727203

Wed Jul 27 14:00:00 2011 Doug Ledford - 3.2.2-2
- When using writemostly on a raid1 array, if you remove a device that
is readwrite and then readd it, it can end up being listed as writemostly
if the device used to pull the superblock info from was writemostly.
Properly clear the writemostly bit when adding/readding a device.
- Related: bz706500

Mon Jul 18 14:00:00 2011 Doug Ledford - 3.2.2-1
- Update to latest upstream release (many bugfixes related to the new
automatic rebuild support: bz716413, bz694083, bz694092, bz694103,
bz694121, bz694779, bz695336, bz702270)
- Correct typo in /etc/sysconfig/raid-check file (bz708280)
- Fix a bug related to readding devices into an array (bz706500)
- Resolves: bz716413, bz694083, bz694092, bz694103, bz694121, bz694779
- Resolves: bz695336, bz702270, bz708280, bz706500

Mon Mar 28 14:00:00 2011 Doug Ledford - 3.2.1-1
- Update to latest upstream release
- Don\'t report mismatch counts on either raid1 or raid10 devices
- Check both active and idle arrays during raid check runs
- Move raid-check script to /usr/sbin, add a crontab entry to /etc/cron.d
and mark it config(noreplace) so that users can select their own
raid check frequency and it will be preserved across updates
- Allow the raid check script to set both the cpu and io priority on the
raid check process in an effort to minimize the impact to users on the
system
- Related: bz633306

Fri Feb 4 13:00:00 2011 Doug Ledford - 3.2-1
- Update to latest upstream release
- Related: bz633306, bz633667, bz633671, bz633688, bz633690, bz633692
- Fix mdadm udev rules file
- Resolves: bz605710
- Process the Y option
- Resolves: bz636883

Wed Aug 11 14:00:00 2010 Doug Ledford - 3.1.3-1
- Update to official 3.1.3 release instead of a git snapshot
- Add patch for return code in the case that a container is not assembled
due to insufficient drives (bz622408)
- Add patch to allow the deprecated --no-degraded option to be passed in,
just not honored (bz622408)
- Resolves: bz622408

Wed Aug 4 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100804.1
- Update to latest upstream (new fix for racy lockfile handling issue)
- Related: bz616597

Thu Jul 29 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100722.2
- Update mdadm rules file to honor noiswmd command line option
- Resolves: bz605710

Thu Jul 22 14:00:00 2010 Doug Ledford - 3.1.3-0.git20100722.1
- Change git date format to the correct format (YYYYMMDD)
- Update to latest upstream push (fixes bz604023)
- Resolves: bz604023

Tue Jul 20 14:00:00 2010 Doug Ledford - 3.1.3-0.git07202010.2
- Fix racy locking of mapfile (bz616597)
- Resolves: bz616597

Tue Jul 20 14:00:00 2010 Doug Ledford - 3.1.3-0.git07202010.1
- Update to latest git repo (3.1.2 plus pending changes, bz617280)
- Remove mdadm.static as its no longer used in initrd creation
- Remove glibc-static buildreq
- Resolves: bz617280

Tue Apr 13 14:00:00 2010 Doug Ledford - 3.1.2-10
- Minor update to mdadm.rules to make anaconda happy

Thu Apr 8 14:00:00 2010 Doug Ledford - 3.1.2-9
- Slight fix on container patch

Thu Apr 8 14:00:00 2010 Doug Ledford - 3.1.2-8
- Updated container patch that also enables mdadm -IRs for imsm devices

Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-7
- Fix up directory in mdmonitor init script so that we restart mdmon like we
are supposed to
- Add a rule to run incremental assembly on containers in case there are
multiple volumes in a container and we only started some of them in the
initramfs
- Make -If work with imsm arrays. We had too restrictive of a test in
sysfs_unique_holder.
- Make incremental assembly of containers act like incremental assembly of
regular devices (aka, --run is needed to start a degraded array)

Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-6
- Typo in new rules file

Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-5
- Enable incremental support for imsm devices

Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-4
- One line fix for ppc64 compiles

Tue Apr 6 14:00:00 2010 Doug Ledford - 3.1.2-3
- Clean up directory mess once and for all
- Add incremental remove support

Wed Mar 17 13:00:00 2010 Doug Ledford - 3.1.2-2
- Add a little more paranoia checking to the RebuildMap code to avoid ever
having the same infinite loop as in bz569019 again even if we change file
locations to somewhere where we can\'t create a mapfile

Tue Mar 16 13:00:00 2010 Doug Ledford - 3.1.2-1
- Grab latest upstream release instead of git repo snapshot (bz552344, bz572561)
- The lack of /dev/md is causing problems, so add code to mapfile.c to cause
us to create /dev/md if it doesn\'t exist (bz569019)

Tue Feb 23 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.6
- Newer version of imsm patch that leaves warning, but only when there
actually are too many devices on the command line (bz554974)

Sun Feb 21 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.5
- The uuid patch cause a different problem during assembly, so use a gross
hack to work around the uuid issue that won\'t break assembly until fixed
properly upstream (bz567132)

Sun Feb 21 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.4
- Fix problem with booting multiple imsm containers when they aren\'t listed
\"just so\" in the mdadm.conf file (bz554974)

Fri Feb 19 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.3
- Don\'t run the raid-check script if the kernel doesn\'t support
md devices (bz557053)
- Don\'t report any mismatch_cnt issues on raid1 devices as there are
legitimate reasons why the count may not be 0 and we are getting enough
false positives that it renders the check useless (bz554217, bz547128)

Thu Feb 18 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.2
- Fix s390/ppc64 UUID byte swap issue

Wed Feb 17 13:00:00 2010 Doug Ledford - 3.1.1-0.gcd9a8b5.1
- Update to head of upstream git repo, which contains a significant number
of bug fixes we need (bz543746)

Fri Jan 15 13:00:00 2010 Doug Ledford - 3.0.3-3
- Fix crash when AUTO keyword is in mdadm.conf (bz552342)

Tue Dec 1 13:00:00 2009 Doug Ledford - 3.0.3-2
- Minor tweak to init script for LSB compliance (bz527957)

Wed Nov 4 13:00:00 2009 Doug Ledford - 3.0.3-1
- New upstream release 3.0.3 (bz523320, bz527281)
- Update a couple internal patches
- Drop a patch in that was in Neil\'s tree for 3.0.3 that we had pulled for
immediate use to resolve a bug
- Drop the endian patch because it no longer applied cleanly and all attempts
to reproduce the original problem as reported in bz510605 failed, even up
to and including downloading the specific package that was reported as
failing in that bug and trying to reproduce with it on both ppc and ppc64
hardware and with both ppc and ppc64 versions on the 64bit hardware.
Without a reproducer, it is impossible to determine if a rehashed patch
to apply to this code would actually solve the problem, so remove the patch
entirely since the original problem, as reported, was an easy to detect DOA
issue where installing to a raid array was bound to fail on reboot and so
we should be able to quickly and definitively tell if the problem resurfaces.
- Update the mdmonitor init script for LSB compliance (bz527957)
- Link from mdadm.static man page to mdadm man page (bz529314)
- Fix a problem in the raid-check script (bz523000)
- Fix the intel superblock handler so we can test on non-scsi block devices

Fri Oct 2 14:00:00 2009 Hans de Goede - 3.0.2-1
- New upstream release 3.0.2
- Add a patch fixing mdadm --detail -export segfaults (bz526761, bz523862)
- Add a patch making mdmon store its state under /dev/.mdadm for initrd
mdmon, rootfs mdmon handover
- Restart mdmon from initscript (when running) for rootfs mdmon handover

Thu Sep 17 14:00:00 2009 Doug Ledford - 3.0-4
- Stop some mdmon segfaults (bz523860)

Tue Sep 15 14:00:00 2009 Doug Ledford - 3.0-3
- Update to current head of upstream git repo for various imsm related fixes
(fixes bz523262)
- Fix display of metadata version in output of Detail mode
- Add UUID output to --detail --export (bz523314)

Fri Jul 24 14:00:00 2009 Doug Ledford - 3.0-2
- Improved raid-check script as well as the ability to configure what devices
get checked
- Endian patch for uuid generation

Mon Jun 29 14:00:00 2009 Doug Ledford - 3.0-1
- Remove stale patches already accepted by upstream
- Fix the raid-check script to only try and check a device if it is
checkable
- Update to official mdadm-3.0 version
- Resolves: bz505587, bz505552

Tue May 19 14:00:00 2009 Doug Ledford - 3.0-0.devel3.7
- Move the mdadm.map file from /dev/md/ to /dev/ so the installer doesn\'t
need to precreate the /dev/md/ directory in order for incremental
assembly to work

Tue May 19 14:00:00 2009 Doug Ledford - 3.0-0.devel3.6
- Only check raid devices automatically, do not attempt to repair them
during the weekly data scrubbing

Fri Mar 20 13:00:00 2009 Doug Ledford - 3.0-0.devel3.5
- Fix a few issues with the new code to determine when a device gets to
keep its name and when it doesn\'t

Fri Mar 20 13:00:00 2009 Doug Ledford - 3.0-0.devel3.4
- Change the perms on the udev rules file, it doesn\'t need to be +x

Fri Mar 20 13:00:00 2009 Doug Ledford - 3.0-0.devel3.3
- Slightly tweak the udev rules to make sure we don\'t start arrays
while running in rc.sysinit...leave array starting to it instead
- Modify mdadm to put its mapfile in /dev/md instead of /var/run/mdadm
since at startup /var/run/mdadm is read-only by default and this
breaks incremental assembly
- Change how mdadm decides to assemble incremental devices using their
preferred name or a random name to avoid possible conflicts when plugging
a foreign array into a host

Wed Mar 18 13:00:00 2009 Doug Ledford - 3.0-0.devel3.2
- Change around the mdadm udev rules we ship to avoid a udev file conflict

Tue Mar 17 13:00:00 2009 Doug Ledford - 3.0-0.devel3.1
- Update to latest devel release
- Remove the no longer necessary udev patch
- Remove the no longer necessary warn patch
- Remove the no longer necessary alias patch
- Update the mdadm.rules file to only pay attention to device adds, not
changes and to enable incremental assembly
- Add a cron job to run a weekly repair of the array to correct bad sectors
- Resolves: bz474436, bz490972

Wed Feb 25 13:00:00 2009 Fedora Release Engineering - 3.0-0.devel2.2.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

Thu Feb 19 13:00:00 2009 Doug Ledford - 3.0-0.devel2.2
- Readd our old mdadm rules file that does incremental assembly
- Remove the new mdadm rules file from upstream as we already have this in
our udev package (and the one in the udev package already has a bug fixed)

Thu Feb 12 13:00:00 2009 Doug Ledford - 3.0-0.devel2.1
- Update to latest upstream devel release
- Use the udev rules file included with mdadm instead of our own
- Drop all the no longer relevant patches
- Fix a build error in mdopen.c
- Fix the udev rules path in Makefile
- Fix a compile issue with the __le32_to_cpu() macro usage (bad juju to
to operations on the target of the macro as it could get executed
multiple times, and gcc now throws an error on that)
- Add some casts to some print statements to keep gcc from complaining

Fri Oct 24 14:00:00 2008 Doug Ledford - 2.6.7.1-1
- Updated to latest upstream stable release (#466803)
- Change udev rule to not assemble degraded arrays (#453314)
- Fix metadata matching in config file (#466078)
- Fix assembly of raid10 devices (#444237)
- Fix incremental assembly of partitioned raid devices (#447818)

Thu Jun 26 14:00:00 2008 Doug Ledford - 2.6.7-1
- Update to latest upstream version (should resolve #444237)
- Drop incremental patch as it\'s now part of upstream
- Clean up all the open() calls in the code (#437145)
- Fix the build process to actually generate mdassemble (#446988)
- Update the udev rules to get additional info about arrays being assembled
from the /etc/mdadm.conf file (--scan option) (#447818)
- Update the udev rules to run degraded arrays (--run option) (#452459)

Thu Apr 17 14:00:00 2008 Bill Nottingham - 2.6.4-4
- make /dev/md if necessary in incremental mode (#429604)
- open RAID devices with O_EXCL to avoid racing against other --incremental processes (#433932)

Fri Feb 1 13:00:00 2008 Bill Nottingham - 2.6.4-3
- add a udev rules file for device assembly (#429604)

Fri Jan 18 13:00:00 2008 Doug Ledford - 2.6.4-2
- Bump version and rebuild

Fri Oct 19 14:00:00 2007 Doug Ledford - 2.6.4-1
- Update to latest upstream and remove patches upstream has taken

Tue Aug 28 14:00:00 2007 Fedora Release Engineering - 2.6.2-5
- Rebuild for selinux ppc32 issue.

Mon Jul 9 14:00:00 2007 Doug Ledford - 2.6.2-4
- Oops, if we call -C -e1, minor_version is no longer properly set, fix that
up
- Related: bz230207

Fri Jul 6 14:00:00 2007 Doug Ledford - 2.6.2-3
- Oops, had to update the file leak patch, missed one thing
- Minor tweak to return codes in init script and add LSB header
- Resolves: bz244582, bz246980

Mon Jul 2 14:00:00 2007 Doug Ledford - 2.6.2-2
- Fix a file leak issue when mdadm is in monitor mode
- Update mdadm init script so that status will always run and so
return codes are standards compliant
- Fix assembly of version 1 superblock devices
- Make the attempt to create an already running device have a clearer
error message
- Allow the creation of a degraded raid4 array like we allow for raid5
- Make mdadm actually pay attention to raid4 devices when in monitor mode
- Make the mdmonitor script use daemon() correctly
- Fix a bug where manage mode would not add disks correctly under certain
conditions
- Resolves: bz244582, bz242688, bz230207, bz169516, bz171862, bz171938
- Resolves: bz174642, bz224272, bz186524

Mon Jul 2 14:00:00 2007 Doug Ledford - 2.6.2-1
- Update to latest upstream
- Remove requirement for /usr/sbin/sendmail - it\'s optional and not on by
default, and sendmail isn\'t
*required
* for mdadm itself to work, and isn\'t
even required for the monitoring capability to work, just if you want to
have the monitoring capability do the automatic email thing instead of
run your own program (and if you use the program option of the monitor
capability, your program could email you in a different manner entirely)

Mon Apr 16 14:00:00 2007 Doug Ledford - 2.6.1-4
- More cleanups for merge review process
- Related: bz226134

Wed Apr 11 14:00:00 2007 Doug Ledford - 2.6.1-3
- Various cleanups as part of merge review process
- Related: bz226134

Sat Mar 31 14:00:00 2007 Doug Ledford - 2.6.1-2
- Oops, missing a dependency in the Makefile

Sat Mar 31 14:00:00 2007 Doug Ledford - 2.6.1-1
- Update to latest upstream version
- Resolves: bz233422

Fri Jan 26 13:00:00 2007 Doug Ledford - 2.6-1
- Update to latest upstream version
- Remove the mdmpd daemon entirely. Now that multipath tools from the lvm/dm
packages handles multipath devices well, this is no longer needed.
- Various cleanups in the spec file

Thu Nov 9 13:00:00 2006 Doug Ledford - 2.5.4-3
- Add a fix for the broken printout of array GUID when using the -E --brief
flags

Fri Oct 13 14:00:00 2006 Doug Ledford - 2.5.4-2
- tag present on another branch and can\'t be forcibly moved
required number bump

Fri Oct 13 14:00:00 2006 Doug Ledford - 2.5.4-1
- Update to 2.5.4 (listed as a bugfix update by upstream)
- Remove previous bitmap patch that\'s now part of 2.5.4

Sun Oct 8 14:00:00 2006 Doug Ledford - 2.5.3-2
- Fix a big-endian machine error in the bitmap code (Paul Clements)

Mon Aug 7 14:00:00 2006 Doug Ledford - 2.5.3-1
- Update to 2.5.3 which upstream calls a \"bug fix\" release

Wed Jul 12 14:00:00 2006 Jesse Keating - 2.5.2-1.1
- rebuild

Fri Jul 7 14:00:00 2006 Doug Ledford - 2.5.2-1
- Update to 2.5.2
- Remove auto default patch as upstream now has a preferred default auto method

Wed Mar 8 13:00:00 2006 Peter Jones - 2.3.1-3
- fix build on ppc64

Wed Mar 8 13:00:00 2006 Jeremy Katz - 2.3.1-2
- fix build on ppc

Wed Mar 8 13:00:00 2006 Jeremy Katz - 2.3.1-1
- update to 2.3.1 to fix raid5 (#184284)

Fri Feb 10 13:00:00 2006 Jesse Keating - 2.2-1.fc5.2.1
- bump again for double-long bug on ppc(64)

Tue Feb 7 13:00:00 2006 Jesse Keating - 2.2-1.fc5.2
- rebuilt for new gcc4.1 snapshot and glibc changes

Fri Dec 9 13:00:00 2005 Jesse Keating
- rebuilt

Mon Dec 5 13:00:00 2005 Warren Togami 2.2-1
- 2.2 upgrade (#167897)
- disable diet because we don\'t ship it anymore
and we don\'t actually use mdassemble now

Mon May 16 14:00:00 2005 Doug Ledford 1.11.0-4.fc4
- Make the mdmonitor init script use the pid-file option, major cleanup
of the script now possible (#134459)

Mon May 16 14:00:00 2005 Doug Ledford 1.11.0-3.fc4
- Put back the obsoletes: raidtools that was present in 1.11.0-1.fc4

Mon May 16 14:00:00 2005 Doug Ledford 1.11.0-2.fc4
- Change the default auto= mode so it need not be on the command line to
work with udev, however it is still supported on the command line (#132706)
- Add a man page (from Luca Berra) for mdassemble

Wed May 11 14:00:00 2005 Doug Ledford - 1.11.0-1.fc4
- Upgrade to 1.11.0

Wed Apr 27 14:00:00 2005 Jeremy Katz - 1.9.0-3.fc4
- fix mdmonitor initscript (#144717)

Mon Mar 21 13:00:00 2005 Doug Ledford 1.9.0-2
- Build mdadm.static and mdassemble (static as well) to be used in initrd
images

Wed Mar 9 13:00:00 2005 Doug Ledford 1.9.0-1
- Initial upgrade to 1.9.0 and update of doc files
- Fix an s390 build error

Mon Oct 4 14:00:00 2004 Doug Ledford 1.6.0-2
- Remove /etc/mdadm.conf from the file list. Anaconda will write one out
if it\'s needed.

Fri Oct 1 14:00:00 2004 Doug Ledford 1.6.0-1
- Update to newer upstream version
- Make mdmpd work on kernels that don\'t have the event interface patch

Fri Jul 30 14:00:00 2004 Dan Walsh 1.5.0-11
- Create a directory /var/run/mdadm to contain mdadm.pid
- This cleans up SELinux problem

Tue Jun 15 14:00:00 2004 Elliot Lee
- rebuilt

Sat May 22 14:00:00 2004 Doug Ledford - 1.5.0-9
- Fix Makefile and build method to satisfy bz #123769
- Add mdmpd man page, update mdmpd version to 0.3 - bz #117160
- Make sure mdadm --monitor closes all md device files so that md devices
can be stopped while mdadm is still running - bz #119532

Thu May 20 14:00:00 2004 Jeremy Katz - 1.5.0-8
- remove unneeded patch, can use --run instead

Wed May 19 14:00:00 2004 Jeremy Katz - 1.5.0-7
- add patch with reallyforce mode on creation to be used by anaconda

Wed May 12 14:00:00 2004 Doug Ledford 2.5.0-6
- Fix a bug in the postun scriptlet related to downgrading to a version
of mdadm that doesn\'t include the mdmpd daemon.

Fri May 7 14:00:00 2004 Doug Ledford 1.5.0-5
- Disable service mdmpd by default to avoid [Failed] messages on
current 2.6 kernels. Possibly re-enable it by default once the
2.6 kernels have the md event interface.

Thu Apr 22 14:00:00 2004 Doug Ledford 1.5.0-4
- Update mdmonitor script to start daemon more cleanly
- Repackage mdmpd tarball to include gcc-3.4 changes and to make
mdmpd properly daemonize at startup instead of forking and leaving
the child attached to the terminal.

Thu Mar 4 13:00:00 2004 Bill Nottingham 1.5.0-3
- ship /var/run/mpmpd (#117497)

Thu Feb 26 13:00:00 2004 Doug Ledford 1.5.0-2
- Add a default MAILADDR line to the mdadm.conf file installed by default
(Bugzilla #92447)
- Make it build with gcc-3.4

Mon Feb 23 13:00:00 2004 Doug Ledford 1.5.0-1
- Update to 1.5.0 (from Matthew J. Galgoci )

Sun Nov 16 13:00:00 2003 Doug Ledford 1.4.0-1
- fix problem with recovery thread sleeping in mdmpd

Fri Nov 14 13:00:00 2003 Doug Ledford
- sync upstream
- add mdmpd package into mdadm package

Wed Sep 10 14:00:00 2003 Michael K. Johnson 1.3.0-1
- sync upstream

Tue Mar 11 13:00:00 2003 Michael K. Johnson 1.1.0-1
- sync upstream

Tue Jan 28 13:00:00 2003 Michael K. Johnson 1.0.1-1
- update for rebuild

Wed Dec 25 13:00:00 2002 Tim Powers 1.0.0-8
- fix references to %install in the changelog so that it will build

Fri Dec 13 13:00:00 2002 Elliot Lee 1.0.0-7
- Rebuild

Fri Jul 12 14:00:00 2002 Michael K. Johnson
- Changed RPM Group to System Environment/Base

Wed May 15 14:00:00 2002 Michael K. Johnson
- minor cleanups to the text, conditionalize rm -rf
- added mdmonitor init script

Fri May 10 14:00:00 2002
- update to 1.0.0
- Set CXFLAGS instead of CFLAGS

Sat Apr 6 14:00:00 2002
- change %install to use \"make install\"

Fri Mar 15 13:00:00 2002
- beautification
- made mdadm.conf non-replaceable config
- renamed Copyright to License in the header
- added missing license file
- used macros for file paths

Fri Mar 15 13:00:00 2002 Luca Berra
- Added Obsoletes: mdctl
- missingok for configfile

Tue Mar 12 13:00:00 2002 NeilBrown
- Add md.4 and mdadm.conf.5 man pages

Fri Mar 8 13:00:00 2002 Chris Siebenmann
- builds properly as non-root.

Fri Mar 8 13:00:00 2002 Derek Vadala
- updated for 0.7, fixed /usr/share/doc and added manpage

Tue Aug 7 14:00:00 2001 Danilo Godec
- initial RPM build