Changelog for anaconda-widgets-29.19.0.40-1.el8.x86_64.rpm :

* Thu Mar 14 2019 Radek Vykydal - 29.19.0.40-1- Pull in new translations (rvykydal) Related: rhbz#1684056
* Tue Mar 12 2019 Radek Vykydal - 29.19.0.39-1- Make SMT warning message smaller (jkonecny) Related: rhbz#1684056- Remove blank line in the SMT warning (jkonecny) Related: rhbz#1684056
* Mon Mar 11 2019 Radek Vykydal - 29.19.0.38-1- Pull in new translations (rvykydal) Related: rhbz#1684056
* Fri Mar 08 2019 Radek Vykydal - 29.19.0.37-1- Update the SMT warning message (rvykydal) Related: rhbz#1684056- Detect and warn if SMT is enabled (vponcova) Resolves: rhbz#1684056
* Mon Feb 25 2019 Radek Vykydal - 29.19.0.36-1- Pass nosmt boot option to installed system. (rvykydal) Resolves: rhbz#1677411- Use unformatted DASDs for the partitioning (vponcova) Resolves: rhbz#1676630
* Fri Feb 22 2019 Radek Vykydal - 29.19.0.35-1- Check for dirinstall target on s390 (bcl) Resolves: rhbz#1677417
* Thu Feb 14 2019 Martin Kolman - 29.19.0.34-3- Change the overflow color (vponcova) Related: rhbz#1637686
* Mon Feb 11 2019 Martin Kolman - 29.19.0.34-2- Remove a confusing message for headless systems (#1638791) (vponcova) Resolves: rhbz#1638791
* Wed Jan 30 2019 Radek Vykydal - 29.19.0.34-1- Restore RHEL-specific stylesheet data (vponcova) Resolves: rhbz#1638383- Do not crash on missing multipath device wwn. (rvykydal) Resolves: rhbz#1666242
* Wed Jan 16 2019 Radek Vykydal - 29.19.0.33-1- Relabel X11/xorg.conf.d directory (jkonecny) Resolves: rhbz#1660436- Reorder items in selinux relabeling post script (jkonecny) Related: rhbz#1660436
* Mon Jan 14 2019 Radek Vykydal - 29.19.0.32-1- Update gjs dependency filter for fedora->rhel filename changes (rvykydal) Related: rhbz#1650295
* Mon Jan 14 2019 Radek Vykydal - 29.19.0.31-1- Change fedora-welcome to rhel-welcome (bcl) Related: rhbz#1650295
* Tue Jan 08 2019 Radek Vykydal - 29.19.0.30-1- Add python3-coverage to testing dependencies (jkonecny) Related: rhbz#1502323- Set Automatic Installation Media for HDD not ISO (jkonecny) Related: rhbz#1502323- Adapt old code to new partition name translation (jkonecny) Related: rhbz#1502323- Fix source spoke status for expanded tree on HDD (jkonecny) Related: rhbz#1502323- Enable installation from install tree on HDD (jkonecny) Resolves: rhbz#1502323
* Mon Dec 17 2018 Radek Vykydal - 29.19.0.29-1- Pull in fixed translations Resolves: rhbz#1659890
* Fri Dec 14 2018 Radek Vykydal - 29.19.0.28-1- Update python-coverage dependency (rvykydal) Resolves: rhbz#1658777- Require password confirmation in GUI (mkolman) Resolves: rhbz#1584064- Only quit GTK mainloop on GUI quit request (mkolman) Resolves: rhbz#1643111- Drop the inst.noblscfg option (javierm) Resolves: rhbz#1658980- Don\'t allow to use LDL DASD disks (vponcova) Resolves: rhbz#1635825- Don\'t allow /boot on LVM (vponcova) Resolves: rhbz#1641986- Use the default LUKS version for auto partitioning (vponcova) Resolves: rhbz#1628519- Make it possible to exit empty user spoke (mkolman) Resolves: rhbz#1620135- Fix pylint errors (vponcova) Related: rhbz#1652727
* Wed Dec 12 2018 Martin Kolman - 29.19.0.27-2- Run zipl again after generating initramfs (#1652727) (vponcova) Resolves: rhbz#1652727
* Wed Dec 05 2018 Radek Vykydal - 29.19.0.27-1- Fix module installation error reporting (mkolman) Resolves: rhbz#1644635- Drop xorg-x11-server-Xorg check from graphical target detection (mkolman) Resolves: rhbz#1583958
* Mon Nov 19 2018 Radek Vykydal - 29.19.0.26-1- Pull in fixed translations Resolves: rhbz#1650431
* Tue Nov 06 2018 Radek Vykydal - 29.19.0.25-1- Hotfix - disable unsupported hardware detection (mkolman) Resolves: rhbz#1645686
* Thu Oct 18 2018 Radek Vykydal - 29.19.0.24-1- Make the pyanaconda/image.py more pep8 (jkonecny) Related: rhbz#1631673- Test image repodata folder based on treeinfo file (jkonecny) Resolves: rhbz#1631673- Use var instead of strings in findFirstIsoImage (jkonecny) Related: rhbz#1631673- Use new InstallTreeMetadata instead of TreeInfo (jkonecny) Related: rhbz#1631673- Add InstallTreeMetadata class (jkonecny) Related: rhbz#1631673- Move DEFAULT_REPOS to the constants (jkonecny) Related: rhbz#1631673
* Mon Oct 15 2018 Radek Vykydal - 29.19.0.23-1- nvdimm: update ks data for actions in UI (rvykydal) Resolves: rhbz#1620093- nvdimm: use pykickstart constant for setting reconfigure mode (rvykydal) Related: rhbz#1620093- Fix strings not marked for translation (jkonecny) Resolves: rhbz#1637399- Increase EFI System Partition (ESP) size to 200-600 MiB (javierm) Resolves: rhbz#1633640- Save lsblk output to the Anaconda traceback file (vtrefny) Resolves: rhbz#1627220
* Thu Oct 11 2018 Radek Vykydal - 29.19.0.22-1- Remove EXPERIMENTAL label for mountpoint assignment in TUI (mkolman) Resolves: rhbz#1636940- Wrap line in storage/osinstall.py to 99 chars (jkonecny) Related: rhbz#1637096- Add missing pylint false positive (jkonecny) Related: rhbz#1637096- Make syspurpose description text size biger (mkolman) Related: rhbz#1612060- Fix double quoting in syspurpose values (mkolman) Resolves: rhbz#1637135- Fix ihelp pylint issues (jkonecny) Related: rhbz#1637096- Add ignored field to rpm_tests (jkonecny) Related: rhbz#1637096- Remove unused false positives (jkonecny) Related: rhbz#1637096- Use new BTRFS pykickstart version (jkonecny) Related: rhbz#1637096- Add back missing import (jkonecny) Related: rhbz#1637096- Add --no-pip to setup-mock-test-env script (jkonecny) Related: rhbz#1637096- Rename coverage3 to coverage-3.6 (jkonecny) Related: rhbz#1637096- Fix error message in setup-mock-test-env script (jkonecny) Related: rhbz#1637096- Rename nosetests binary to 3.6 - link is missing (jkonecny) Resolves: rhbz#1637096- Remove not used BuildRequires for RHEL (jkonecny) Related: rhbz#1637096- Add shortcut function to get dependency script (jkonecny) Related: rhbz#1637096- Add install-pip parameter to setup-mock-test-env (jkonecny) Related: rhbz#1637096- Add initial 32-bit ARMv7 EFI support (pbrobinson) Resolves: rhbz#1637618- Drop legacy get_arm_machine pieces (pbrobinson) Related: rhbz#1637618- arch: arm: drop omap checks and specifics (pbrobinson) Related: rhbz#1637618- Small optimalization in setup-mock-test-env (jkonecny) Related: rhbz#1637096- Add package installation from pip for test script (jkonecny) Related: rhbz#1637096- Remove hfsplus-tools not used on RHEL (jkonecny) Related: rhbz#1637096
* Wed Oct 10 2018 Radek Vykydal - 29.19.0.21-1- Add Not Specified option for System Purpose lists (mkolman) Resolves: rhbz#1637602- Set the VNC password directly (vponcova) Resolves: rhbz#1634667
* Mon Oct 08 2018 Radek Vykydal - 29.19.0.20-1- Ignore errors when trying to activate unsupported swaps (vtrefny) Resolves: rhbz#1635253- Adapt built in help system to new content structure (mkolman) Resolves: rhbz#1593723- Update help folder paths (mkolman) Related: rhbz#1593723- Replace helpFile property with help_id (mkolman) Related: rhbz#1593723- Small optimization in boot arg parsing method (jkonecny) Related: rhbz#1622429- Fix bad --addrepo command line parsing (jkonecny) Related: rhbz#1622429- Raise correct exception on bad addrepo boot param (jkonecny) Resolves: rhbz#1622429
* Thu Oct 04 2018 Radek Vykydal - 29.19.0.19-1- Add option to set kernel.hung_task_timeout_secs option (rvykydal) Resolves: rhbz#1633549- Change default install class to RHEL (jkonecny) Resolves: rhbz#1634094- Don\'t check for firmware compatibility to enable BootLoaderSpec support (javierm) Resolves: rhbz#1635547
* Tue Oct 02 2018 Radek Vykydal - 29.19.0.18-1- Update kernel command line parameters in BLS files (javierm) Resolves: rhbz#1635180- Drop attempt to add \'nocrypto\' to tsflags (#1634791) (awilliam) Resolves: rhbz#1634791- Make sure fips is correctly enabled on target system (#1619568) (mkolman) Resolves: rhbz#1619568
* Mon Oct 01 2018 Radek Vykydal - 29.19.0.17-1- Syspurpose related test & pylint fixes (mkolman) Related: rhbz#1612060- Add missing folder to Makefile (mkolman) Related: rhbz#1612060- Add system purpose support (mkolman) Resolves: rhbz#1612060
* Wed Sep 26 2018 Radek Vykydal - 29.19.0.16-1- Sync spec file (rvykydal) Related: rhbz#1619153- Fix python3 requires in spec file (rvykydal) Resolves: rhbz#1619153- Revert \"Add system purpose support\" (rvykydal) Related: rhbz#1619153- Add support for GRUB_ENABLE_BLSCFG and inst.noblscfg (pjones) Resolves: rhbz#1615442- Get rid of new-kernel-pkg invocations (pjones) Related: rhbz#1615442- Minor pylint cleanups (pjones) Related: rhbz#1615442
* Mon Sep 24 2018 Radek Vykydal - 29.19.0.15-1- Add system purpose support (mkolman) Resolves: rhbz#1612060
* Wed Sep 19 2018 Tomas Orsava - 29.19.0.14-2- Require the Python interpreter directly instead of using the package name- Related: rhbz#1619153
* Wed Sep 19 2018 Radek Vykydal - 29.19.0.14-1- Update the spoke for unsupported hardware in TUI (#1601545) (vponcova) Resolves: rhbz#1601545- Update the dialog for unsupported hardware in GUI (#1601545) (vponcova) Resolves: rhbz#1601545- Support detection of kernel taints (vponcova) Resolves: rhbz#1601545
* Tue Sep 18 2018 Radek Vykydal - 29.19.0.13-1- prefixdevname: fix a typo in filename (rvykydal) Related: rhbz#1615997- prefixdevname: pass persistent configuration to installed system (rvykydal) Resolves: rhbz#1615997- prefixdevname: pass net.ifnames.prefix option to installed system (rvykydal) Resolves: rhbz#1615997- prefixdevname: install package to target system if needed (rvykydal) Resolves: rhbz#1615997- prefixdevname: import state from initramfs to stage 2 (rvykydal) Resolves: rhbz#1615997
* Mon Sep 17 2018 Radek Vykydal - 29.19.0.12-1- Don\'t connect to signals of the Network Manager DBus objects (vponcova) Resolves: rhbz#1582233- Fix librepo logging with new DNF (jkonecny) Resolves: rhbz#1626609
* Fri Sep 07 2018 Josh Boyer - 29.19.0.11-2- Require python3-librepo Resolves: rhbz#1626609
* Fri Sep 07 2018 Radek Vykydal - 29.19.0.11-1- DNF 3.5 compatibility (mkolman) Related: rhbz#1613296- Don\'t try to get hostnamed proxy in non-installer-image environments (rvykydal) Resolves: rhbz#1622917
* Fri Aug 24 2018 Radek Vykydal - 29.19.0.10-1- Revert \"Don\'t allow booting from nvdimm devices\" (rvykydal) Resolves: rhbz#1620566- Fix pylint errors (vponcova) Related: rhbz#1618633
* Wed Aug 22 2018 Radek Vykydal - 29.19.0.9-1- Fix crash in tui when default partitioning scheme is not supported (rvykydal) Related: rhbz#1617958
* Thu Aug 16 2018 Radek Vykydal - 29.19.0.8-1- Add inst.addrepo documentation for HD variant (jkonecny) Related: rhbz#1595415- Warn when repo names are not unique (jkonecny) Related: rhbz#1595415- HD addon repos have mount directories permanent (jkonecny) Related: rhbz#1595415- Unmount hard drive additional repositories (jkonecny) Related: rhbz#1595415- Move RepoData copy creation to the RepoData class (jkonecny) Related: rhbz#1595415- Show empty file protocol on HD addon repo fail (jkonecny) Related: rhbz#1595415- Mount and use HDD additional repositories (jkonecny) Related: rhbz#1595415- Separate _find_and_mount_iso from _setup_media (jkonecny) Related: rhbz#1595415- Load hard drive repo type from inst.addrepo (jkonecny) Related: rhbz#1595415- Do not fail if .discinfo file can\'t be read (jkonecny) Related: rhbz#1595415- Use productmd to parse .discinfo file (jkonecny) Related: rhbz#1595415- Add payload sources tests (jkonecny) Related: rhbz#1595415- Cleanup payload tests source file (jkonecny) Related: rhbz#1595415- Add documentation for inst.addrepo boot option (jkonecny) Related: rhbz#1595415- Add additional repositories to KS data (jkonecny) Resolves: rhbz#1595415- Use new source solution (jkonecny) Related: rhbz#1595415- Add payload sources implementation (jkonecny) Related: rhbz#1595415- Mark disks with additional repos as protected (jkonecny) Related: rhbz#1595415- Support boot args parsing to list (jkonecny) Related: rhbz#1595415- Add inst.addrepo new options (jkonecny) Related: rhbz#1595415- Make parenthesis consistent (jkonecny) Related: rhbz#1595415- Remove unused parameter from live_startup method (jkonecny) Related: rhbz#1595415- Disable treeinfo based repos only once (jkonecny) Related: rhbz#1610806- Disable treeinfo repos when base repo change (jkonecny) Related: rhbz#1610806- Treeinfo repos can\'t be changed nor removed (jkonecny) Related: rhbz#1610806- Add all repositories from the treeinfo file (jkonecny) Resolves: rhbz#1610806- Load base repository location from treeinfo (jkonecny) Related: rhbz#1610806- Add limited file:// protocol to GUI Source spoke (jkonecny) Related: rhbz#1610806- Add BaseOS between default base repositories (jkonecny) Related: rhbz#1610806- Split _setupInstallDevice method in payload (jkonecny) Related: rhbz#1610806
* Mon Aug 13 2018 Radek Vykydal - 29.19.0.7-1- Revert back to running DNF in a subprocess (mkolman) Related: rhbz#1613296- Add back reverted patches for modularity support (rvykydal) Related: rhbz#1613296
* Mon Aug 13 2018 Radek Vykydal - 29.19.0.6-1- Check the LUKS2 memory requirements (vponcova) Related: rhbz#1547908- Add an option for choosing version of LUKS in GUI (vponcova) Related: rhbz#1547908- Add tests for LUKS2 in the auto partitioning module (vponcova) Related: rhbz#1547908- Apply the LUKS2 options from the auto partitioning module (vponcova) Related: rhbz#1547908- Support LUKS2 options in the auto partitioning module (vponcova) Related: rhbz#1547908- Support LUKS2 options in logvol, part and raid commands (vponcova) Related: rhbz#1547908- Enable to set a default version of LUKS (vponcova) Related: rhbz#1547908- Update dependencies and kickstart commands to support LUKS2 (vponcova) Resolves: rhbz#1547908- Use SimpleConfigFile to get PLATFORM_ID from /etc/os-release (mkolman) Related: rhbz#1613296- Use wwn attr instead of removed wwid. (#1565693) (dlehman) Resolves: rhbz#1615408
* Thu Aug 09 2018 Radek Vykydal - 29.19.0.5-1- Fix a 5 year old typo in the spec file (mkolman) Resolves: rhbz#1613488- Bump required DNF version (mkolman) Related: rhbz#1613296- Fix some small issues with the platform id patch (mkolman) Related: rhbz#1613296- Set platform id for DNF (mkolman) Related: rhbz#1613296- Fix crash when software environment is False (jkonecny) Resolves: rhbz#1612942- Allow to delete all file systems used by Unknown (#1597199) (vponcova) Resolves: rhbz#1597199
* Mon Aug 06 2018 Radek Vykydal - 29.19.0.4-1- DD: Use text mode when calling tools with subprocess (rvykydal) Resolves: rhbz#1609744- Update RHEL placeholder names (mkolman) Related: rhbz#1593723
* Thu Aug 02 2018 Radek Vykydal - 29.19.0.3-3- Revert Use productmd library to parse .treeinfo (rvykydal) Related: rhbz#1611622
* Wed Aug 01 2018 Radek Vykydal - 29.19.0.3-2- Revert of module support enablement (install specs DNF API) (rvykydal)
* Wed Aug 01 2018 Radek Vykydal - 29.19.0.3-1- Typo fixup (rvykydal)- Define if blivet-gui is supported via installclasses (rvykydal) Related: rhbz#1599838- Offer Blivet-GUI partitioning only if supported (rvykydal) Related: rhbz#1599838- Only show the \"closest mirror\" source option where appropriate (mkolman) Resolves: rhbz#1608241- Starting from 3.0 DNF expects strings in comps queries (mkolman)- Remove blivet-gui spoke and its dependencies (rvykydal) Resolves: rhbz#1599838- Use the manual partitioning module in TUI (vponcova)- Use the manual partitioning module in UI (vponcova)- Add tests for the manual partitioning module (vponcova)- Create the manual partitioning module (vponcova)- Reserve enough static space for 2 lines in spoke status on hub (#1584160) (rvykydal)- Handle new module specific error states (mkolman)- Handle missing package errors reported by the install_specs() function (mkolman)- Initial module enablement and installation support (mkolman)- Fix disable additional repositories (jkonecny)- Show better messages for NoSuchPackage and NoSuchGroup (#1599190) (vponcova) Resolves: rhbz#1599190- Bootloader stage2 can\'t be on btrfs on rhel (#1533904) (rvykydal) Related: rhbz#1533904- Remove --fstype=btrfs support from LogVol, Raid and Partition (rvykydal) Resolves: rhbz#1533904- Remove btrfs support. (rvykydal) Resolves: rhbz#1533904- Use RHEL8 versions of commands added to RHEL8 handler for test (rvykydal)- Use RHEL8 kickstart handler (rvykydal)- Use productmd library to parse .treeinfo (#1411673) (jkonecny)- Import kickstart classes as version-less in the dracut script (vponcova)- Use only version-less kickstart classes (vponcova)- Define version-less variants of kickstart classes (vponcova)- Pylint should skip the file livepayload.py (vponcova)- Fix pylint errors (vponcova)
* Wed Jul 25 2018 Radek Vykydal - 29.19.0.2-1- Change the pop-up text with the pre-release warning (#1542998) (vpodzime) Resolves: rhbz#1608243- Sort categories on the hub by defined order (#1584160) (rvykydal) Resolves: rhbz#1584166- Show a note about EULA where relevant (mkolman) Resolves: rhbz#1569596- Change message log level to INFO when adding repo (jkonecny) Related: rhbz#1603178- Set packaging log level to DEBUG by default (jkonecny) Resolves: rhbz#1603178- Remove the python-wrapt dependency (vponcova)- Do not use capitals for spoke names (#1584160) (rvykydal) Resolves: rhbz#1584166- Wrap category label and add space between columns (#1584160) (rvykydal) Resolves: rhbz#1584166- Use 32 px icons (instead of 16 px) on hubs (#1584160) (rvykydal) Resolves: rhbz#1584166- Make pyanaconda.dbus.typing work with Python 3.7 (#1598574) (awilliam)- Use Platform Python where appropriate (mkolman)- Replace deprecated dracut options for booting with ibft. (rvykydal) Resolves: rhbz#1566052- Protected devices might be hidden (#1561766) (vponcova)- Improve handling of unsupported filesystems in UI. (rvykydal) Resolves: rhbz#1533904- Reserve two lines for status message (#1584160) (rvykydal) Resolves: rhbz#1584166- Use three spoke columns on hub for better scaling (#1584160) (rvykydal) Resolves: rhbz#1584166- fstab: include a note about systemctl daemon-reload (zbyszek)- Access the ZFCP module only on s390x (vponcova)- Tell libreport if it is a final release or not (#1596392) (vpodzime) Resolves: rhbz#1596392- bootloader: GRUB2: Set menu_auto_hide when enabled by the instClass (hdegoede)- installclass: Add bootloader_menu_autohide property (hdegoede)- Add tests for the zFCP module (vponcova)- Handle the zfcp command in the zFCP module (vponcova)- Use the zFCP discovery task in UI (vponcova)- Create the zFCP discovery task (vponcova)- Create the zFCP module (vponcova)
* Mon Jul 16 2018 Radek Vykydal - 29.19.0.1-1- Define zanata branch statically for rhel-devel branch (rvykydal)
* Wed Jun 27 2018 Martin Kolman - 29.19-1- DNF 3: progress callback constants moved to dnf.transaction (awilliam)- DNF 3: Update size calculations for transaction item changes (awilliam)- DNF 3: config substitutions moved from dnf to libdnf (awilliam)
* Mon Jun 25 2018 Martin Kolman - 29.18-1- Add tests for the DASD module (vponcova)- Run the DASD formatting task in UI (vponcova)- Extend the sync_run_task method with a callback (vponcova)- Create a task for formatting DASDs (vponcova)- Run the DASD discovery task from UI (vponcova)- Create a task for discovering DASDs (vponcova)- Create the DASD module (vponcova)- Add tests for the language installation task (vponcova)- Run an installation task to install a language (vponcova)- nvdimm: fix crash on non-block devices (rvykydal)
* Tue Jun 12 2018 Martin Kolman - 29.17-1- Wait for kickstart modules to quit (vponcova)- Ask for a default passphrase if required (vponcova)- Add support for setting different types of passwords in TUI (vponcova)
* Thu Jun 07 2018 Martin Kolman - 29.16-1- Add tests for changes in tasks and the install manager (vponcova)- Add a simple installation task in the Baz module (vponcova)- Update the boss classes (vponcova)- Update the base clases for modules (vponcova)- Use the system installation task in the install manager (vponcova)- Add the system installation task (vponcova)- Add methods for running remote DBus tasks (vponcova)- Improved base clases for DBus tasks (vponcova)- Do not manually create LUKSDevice when unlocking a LUKS format (vtrefny)- Fix pylint errors (vponcova)- Skip the pylint check for the bootloader.py (vponcova)- Enable DNF depsolver debugging in debug mode (mkolman)- Don\'t reset locale of our DBus daemon (vponcova)- Close the DNF base later (#1571299) (vponcova)- Add 10% for storage metadata to the total required space (#1578395) (vponcova)- Add hook to prevent mistake upstream pushes (jkonecny)- Revert \"WIP\" (vponcova)- WIP (vponcova)- Set locale to en_US.UTF-8 in every module (#1575415) (vponcova)- Move initial module configuration to the init function (vponcova)- Fix the mount command (vponcova)- Use the auto partitioning module in UI (vponcova)- Only check space during a tui kickstart if ksprompt is enabled (bcl)- Fix can\'t exit TUI storage spoke (jkonecny)- Use PROCESSED_AND_CLOSE and PROCESSED_AND_REDRAW (jkonecny)- Remove not required PROCESSED return (jkonecny)- Remove PROCESSED from refresh method (jkonecny)
* Wed May 16 2018 Martin Kolman - 29.15-1- nvdimm: make debug messages more clear (rvykydal)- nvdimm: use libblockdev enum to check namespace mode (rvykydal)- Add data loss warning to nvdimm reconfigure dialog. (rvykydal)- Add UI feedback for disk repopulating after nvdimm reconfiguration. (rvykydal)- Fix ignoring of nvdimm devices (rvykydal)- Don\'t allow booting from nvdimm devices (rvykydal)- Improve UI feedback for invalid boot on non-iBFT iSCSI devices. (rvykydal)- Add inst.nonibftiscsiboot boot option. (rvykydal)- Use only devices specified by nvdimm command for installation. (rvykydal)- Add option to reconfigure nvdimm devices into sector mode. (rvykydal)- Allow only devices in sector mode to be selected. (rvykydal)- Add nvdimm devices to Advanced Storage spoke. (rvykydal)- Add kickstart support for nvdimm reconfiguration to sector mode. (rvykydal)- Ignore nvdimm disks which are not in sector mode. (rvykydal)- Do not ignore nvdimm (pmemX) devices (rvykydal)- Update the pykickstart commands (vponcova)- Fix firewall DBUS module API usage (#1577405) (mkolman)- Fix formatting in the TUI storage spoke (jkonecny)- Fix TUI crash in mountpoint assignment (#1564067) (jkonecny)- Fix KS logvol metadata and chunksize parameters (#1572511) (jkonecny)- Show correct bootloader error on the MacEFI platform (vponcova)- Revert \"Fix broken kickstart command test\" (rvykydal)- Support fcoe --autovlan option (#1564096) (rvykydal)
* Fri May 04 2018 Martin Kolman - 29.14-1- Increase module startup timeout to 600 seconds (mkolman)- Fix name of the Zanata Python client package (mkolman)- Add tests for the auto partitioning module (vponcova)- Create the auto partitioning module (vponcova)- Add the firewall submodule (mkolman)- Once again fix cmdline error handling. (#1360223) (sbueno+anaconda)- Extend the timeout period to 180s in the case of cmdline error. (#1360223) (sbueno+anaconda)- Fix the clearpart test with disklabel option (vponcova)- The specified nosetests failed to run (vponcova)
* Tue Apr 24 2018 Martin Kolman - 29.13-1- Show correct root account locked status in reconfig mode (#1507940) (mkolman)- Add missing lines and modularization only log to test coverage (jkonecny)- Remove makebumpver dependency from spec file (jkonecny)- network module: use connectivity checking in anaconda (rvykydal)- network module: add connectivity checking (rvykydal)- Permit adding disabled external repos to installation. (riehecky)- Handle empty active attribute for consoles (#1569045) (mkolman)- Support temporary kickstart generating (vponcova)- Create the dynamic module User (vponcova)- Select Workstation install class for Workstation live (#1569083) (awilliam)- Rename the main module User to Users (vponcova)
* Thu Apr 19 2018 Martin Kolman - 29.12-1- Save logs to result folder after rpm-tests (jkonecny)- Add Installed pyanaconda tests (jkonecny)- Fix name of the RPM test (jkonecny)- Support running just chosen rpm test (jkonecny)- Add test cache files to gitignore (jkonecny)- Move test install test from Makefile to rpm tests (jkonecny)- Create structure to run rpm tests (jkonecny)- Move all nosetests to separate directory (jkonecny)- Fix broken kickstart command test (jkonecny)- Fix broken kickstart command test (jkonecny)- localization: use LanguageKickstarted module property (#1568119) (rvykydal)- Start only the specified kickstart modules (#1566621) (vponcova)- Use the Bootloader module in UI (vponcova)- Add tests for the bootloader module (vponcova)- Create the bootloader module (vponcova)- rpmostreepayload: do not require network for dvd installation (#1565369) (rvykydal)- Fix double logging to stdout (vponcova)- Don\'t try to create required partitions if there are none (vponcova)
* Thu Apr 12 2018 Martin Kolman - 29.11-1- Add anaconda-install-env-deps as dependency of the anaconda package (mkolman)- Add %files for install-env-deps so it actually exists (awilliam)
* Tue Apr 10 2018 Martin Kolman - 29.10-1- Bump simpleline version (mkolman)- Do not redraw screen after text YesNo dialog (#1557951)(jkonecny)- Revert \"Adapt to a new simpleline changes (#1557472)(jkonecny)- authselect: enable silent last log (pbrezina)- authselect: fix typo to enable fingerprint authentication (pbrezina)
* Mon Apr 09 2018 Martin Kolman - 29.9-1- Move install time dependencies to a metapackage (mkolman)
* Thu Apr 05 2018 Martin Kolman - 29.8-1- Fix forgotten usage of the selinux kickstart command (vponcova)- Fix tests for the storage module (vponcova)- Use the disk selection and initialization modules in UI (vponcova)- Enable to use object identifiers instead of object paths (vponcova)
* Thu Mar 29 2018 Martin Kolman - 29.7-1- Add Makefiles for disk initialization and selection modules (vponcova)- Remove the invalid self argument (vponcova)- Run all unit tests (vponcova)
* Tue Mar 27 2018 Martin Kolman - 29.6-1- Create the disk initialization and disk selection modules (vponcova)- Use watch_property to watch changes of DBus properties (vponcova)- Better organize the base classes for modules (vponcova)- Fixed KS forcing zerombr onto RO disk (japokorn)- Add tests for the kickstart specifications (vponcova)- Standardize calls to parent via super() (riehecky)- Fix \'isDisk\' property name (#1558906) (vtrefny)- Make the class for removed kickstart commands more strict (vponcova)- Fix the progress bar steps (vponcova)- Use enum for the first boot action (vponcova)- Use enum for the SELinux modes (vponcova)- datetime spoke: still pass ksdata to NTPconfigDialog (UIObject) (rvykydal)
* Mon Mar 19 2018 Martin Kolman - 29.5-1- Write rootpw command to kickstart (#1557529) (mkolman)- Don\'t make safe to observe services on buses that don\'t run (vponcova)- Add the LanguageKickstarted property (vponcova)- Don\'t autoquit by default if the last hub is empty (#1553935) (mkolman)- Use the Services module in UI (vponcova)- Create the Services module (vponcova)- Enable hibernation only on x86 (#1554345) (vponcova)- Add the Storage module with no API (vponcova)- Add the Payload module with no API (vponcova)- Remove DBus modules Foo and Bar (vponcova)- network module: fix accessing org.freedesktop.hostname1 for current hostname (rvykydal)
* Mon Mar 12 2018 Martin Kolman - 29.4-1- network module: add basic test (rvykydal)- Add prepare command to setup-mock-test-env script (jkonecny)- Mark partition live device\'s disk protected. (#1524700) (dlehman)
* Fri Mar 09 2018 Martin Kolman - 29.3-1- Remove useless constants from pyanaconda.dbus.constants (vponcova)- Use identifiers to get observers and proxies (vponcova)- Remove the publish method from DBus interfaces (vponcova)- Replace constants in publish and register methods (vponcova)- Replace constants in DBus interface names (vponcova)- Define DBus errors with the dbus_error decorator (vponcova)- Use namespaces and identifiers to describe Anaconda DBus objects (vponcova)- Add support for identification of DBus objects and services (vponcova)- User module should parse only rootpw for now (#1553488) (vponcova)- localization module: plug localization module into keyboard GUI spoke (rvykydal)- localization module: add KeyboardKickstarted property (rvykydal)- localization module: add KS support for keyboard command (rvykydal)- localization module: don\'t use Kickstarted so another command can be added (rvykydal)- Fix release docs (mkolman)- network: set TYPE value in ifcfg from kickstart in initrmfs (rvykydal)- Make formatting consistent in AnacondaWidgets.xml (riehecky)
* Mon Mar 05 2018 Martin Kolman - 29.2-1- Use the user DBUS module in the UI (mkolman)- Use the user DBUS module for the rootpw command in kickstart.py (mkolman)- Add initial user DBUS module (mkolman)- Add tests for the Security module (vponcova)- Use the Security module in UI (vponcova)- Don\'t send empty kickstart to DBus modules (vponcova)- Add the Security module (vponcova)- Fix makeupdates script to work with new DBus structure (jkonecny)- Fix Makefile of the kickstart manager (vponcova)- Fix check if dbus daemon quit properly (jkonecny)- Remove check if dbus is running (#1551096) (jkonecny)- Use Anaconda\'s special env variable for dbus address (#1551096) (jkonecny)- Migrate Anaconda to our private dbus session (#1551096) (jkonecny)- localization module: use l12 shortcut for module name in UI (rvykydal)- localization module: replace ksdata.lang with the module in anaconda. (rvykydal)- localization module: add KS support for lang command (rvykydal)- Return restorecon utility to Fedora 28 mock (jkonecny)- Include dbus.log when exporting logs (mkolman)- Reorganize pyanaconda.modules.boss (vponcova)- Move all DBus errors to pyanaconda.modules.common.errors (vponcova)- Move common classes and functions to pyanaconda.modules.common (vponcova)- Close DBus log file when quitting DBus session (jkonecny)- Enable payload configuration for Install classes (jkonecny)- Rename files that provide kickstart specifications (vponcova)- Move the kickstart specification to pyanaconda.core.kickstart (vponcova)- Start and quit Boss properly (jkonecny)- Make class from dbus.launcher module (jkonecny)- Add the kernel option resume= by default (#1206936) (vponcova)
* Wed Feb 28 2018 Martin Kolman - 29.1-1- Use observers to access the hostname service (vponcova)- Make safe to observe services on buses that don\'t have to run (vponcova)- DBus logs are now saved to /tmp/dbus.log (jkonecny)- Add tests for toplevel installclass attribs (riehecky)- Wait for DBus modules for longer time (vponcova)- Drop dependency on authselect and firewalld (vponcova)- Fix kickstart version test (vponcova)- Authconfig is replaced with authselect (#1542968) (vponcova)- Add support for different message buses (vponcova)- Fix makeupdates script (vponcova)- Set up basic logging for DBus modules (vponcova)- Remove get_dbus_module_logger (vponcova)- Fix logging of the DBus modules (vponcova)- Fix the reimport error (vponcova)- Fix the network module specification (vponcova)- network module: update_network_data test (rvykydal)- network module: use Module.Kickstarted instead of ksdata.seen (rvykydal)- network module: use for hostname in tui (rvykydal)- network module: handle current hostname (rvykydal)- network module: handle ksdata.network.hostname (rvykydal)- network module: add module skeleton (rvykydal)- Log changes in the kickstart modules. (vponcova)- Use the Timezone module in UI. (vponcova)- Start Boss from Anaconda (jkonecny)- Do not use System DBus (jkonecny)- Remove anaconda-boss.service (jkonecny)- Move Anaconda dbus services and confs to session dbus (jkonecny)- Run DBus session if not present (jkonecny)- Change pykickstart version (vponcova)- Move system-logos dependency from anaconda-core to anaconda-gui (mkolman)- makebumpver: fix parsing of -m option (rvykydal)- makebumpver: fix -i option (rvykydal)- Fix tests of the Timezone module (vponcova)- installclass: add comments to server install class (dusty)- Don\'t use deprecated formatErrorMsg (vponcova)- Use the KickstartError attributes (vponcova)- kickstart: \"clearpart --list\" does not work (#1410335) (marcel)- Use handler in the Timezone module (vponcova)- Fix the specification of the Bar module (vponcova)- Use the KickstartHandler class (vponcova)
* Mon Feb 19 2018 Martin Kolman - 28.22-1- Prevent anaconda-core requiring gjs-console (awilliam)- Temporarily don\'t test versions of specified kickstart objects (vponcova)
* Mon Feb 19 2018 Martin Kolman - 28.21-1- Explain when run dependency_solver without options (jkonecny)- Clean dd_test code (jkonecny)- We can\'t set file permission mode for .so in dd test (jkonecny)- Rename installclass_atomic to Fedora Atomic Host (jkonecny)- Support running only nosetests or only some nosetests (jkonecny)- Do not run tests as root (jkonecny)- Save start and end time for pylint run (jkonecny)- Separate grab-logs from ci target in Makefile (jkonecny)- Remove false positive but disable Pylint in makeupdates script (jkonecny)- Add copyright to scripts in ./scripts/testing (jkonecny)
* Thu Feb 15 2018 Adam Williamson - 28.20-2- Prevent anaconda-core requiring gjs-console (awilliam)
* Fri Feb 09 2018 Martin Kolman - 28.20-1- Check the proxy attribute before accessing it (vponcova)- Check the noverifyssl attribute before accessing it (vponcova)- Don\'t access the url attribute (#1530428) (vponcova)- Use Fedora Server default partitioning in Atomic (jkonecny)- Clean code of Atomic install class (jkonecny)- Migrate Atomic install class (#1491287) (jkonecny)- Move Atomic install class to Anaconda (#1491287) (#1536853) (jkonecny)- Make sure that fetch_url is defined. (vponcova)
* Mon Feb 05 2018 Martin Kolman - 28.19-1- Change pykickstart version. (vponcova)- Do not deepcopy the kickstart data in the storage (vponcova)- Replace deepcopy of the method command (vponcova)- Use pykickstart 3 (vponcova)- Provide comprehensive log messages about the display mode (vponcova)- Fix missing logging in some cases of update of ONBOOT value. (rvykydal)- Fix tests for the timezone module. (vponcova)- Add the Kickstarted property to the kickstart modules. (vponcova)- Connect to the observed service and other stuff. (vponcova)- Prevent 99-copy-lgs.ks from exiting with a 1 (bcl)- Rename SetUTC to SetIsUTC in the timezone module. (vponcova)
* Thu Jan 18 2018 Martin Kolman - 28.18-1- Move how to use setup-mock-test-env script to help (jkonecny)- Add --init as new parameter to setup-mock-test-env (jkonecny)- Initialize the thread manager at the first import. (vponcova)- Added tests for the timezone module and other. (vponcova)- Remove \'i\' from iutil module (jkonecny)- Remove \'i\' from isignal module (jkonecny)- Move isignal module to core/isignal (jkonecny)- Extract process watch functions to a static class (jkonecny)- Move regexes module to core/regexes (jkonecny)- Move i18n module to core/i18n (jkonecny)- Move constants module to core/constants (jkonecny)- Move iutil module to core/iutil (jkonecny)- Move async_utils to core/async_utils (jkonecny)- Replace gobject GLib by our core/glib (jkonecny)- Rename run_in_main_thread to run_in_loop (jkonecny)- Add Timer and PidWatcher abstraction above GLib (jkonecny)- Create abstraction above GLib event loop (jkonecny)- Add core/glib module for GLib access (jkonecny)- Ignore errors for KickstartSpecificationHandler. (vponcova)- Try to use the PropertiesChanged signal. (vponcova)- Add timezone module. (vponcova)- Collect properties changes before emit. (vponcova)- Use Ping method from the standard interface. (vponcova)- Recognize members of standard interfaces. (vponcova)- Add an object observer with cached properties (vponcova)- Rename modules with Fedora install classes. (vponcova)- Add support for Variant in .buildstamp (vponcova)- Fix the Bar module. (vponcova)- Add pykickstart version to branching policy doc (jkonecny)- Remove `unstable` branch from documentation (jkonecny)- Move system-logos to anaconda-core (#1529239) (bcl)
* Fri Jan 05 2018 Martin Kolman - 28.17-1- Modules should use the proxy pattern. (vponcova)- Variants need to be instances of the Variant class (vponcova)- kickstart: support firewall --use-system-defaults (#1526450) (dusty)- Check payload is set before accessing its data (#1524785) (mkolman)- Do not fail when test are failing in setup-env script (jkonecny)- Support running multiple commands at once (jkonecny)- Support copy Anaconda result dir out of mock (jkonecny)- Remove dependencies from Makefile (jkonecny)- Add path to Anaconda in mock to constant (jkonecny)- Properly exclude packages from the install set (ngompa13)- Add the _prepare_command helper function to setup-test-env (jkonecny)- Add run-tests parameter to setup-test-env script (jkonecny)- Remove /anaconda in mock before copying new one (jkonecny)
* Tue Jan 02 2018 Martin Kolman - 28.16-1- Improve password checking status and error messages (mkolman)- Spin kickstarts shouldn\'t be test dependency (jkonecny)
* Wed Dec 20 2017 Martin Kolman - 28.15-1- Remove spurious echo call from tmux service file (#1526861) (mkolman)- Restore fix for RHBZ #1323012 (`set_name` not `setName`) (awilliam)- Fix Makefile for modules/[foo,bar]/tasks and for install_manager (rvykydal)- Make passing kickstart to boss more visible. (rvykydal)- Add tests for KickstartManager. (rvykydal)- Add kickstart dispatching to anaconda. (rvykydal)- Add kickstart dispatching to local boss run script (rvykydal)- Add KickstartManager for Boss. (rvykydal)- Add method for getting line mapping from kickstart elements to kickstart (rvykydal)- Add info about handled kickstart commands to modules (rvykydal)- Add missing Makefile for kickstart_dispatcher (rvykydal)
* Mon Dec 18 2017 Martin Kolman - 28.14-1- Use observers in the install manager (vponcova)- Modify readme file for tests (jkonecny)- Do not bump version when testing installation (jkonecny)- Add set up test environment script (jkonecny)- Add dependency solver script (jkonecny)- Differentiate upstream and build-time version (#1493952) (mkolman)- Fix bad bash \'
*\' expansion when loading kernel modules (#1525841) (jkonecny)- Fix connection to a signal in the install manager (vponcova)- Use the InterfaceTemplate in the InstallationInterface (vponcova)- Use the InterfaceTemplate in the TaskInterface (vponcova)- Add a base class for DBus interfaces (vponcova)- Update module manager to use observers (vponcova)- Add DBus observers for better access to proxies. (vponcova)- Remove running CI in mock from Makefile (jkonecny)- Add xfsprogs and git to the test requirements (jkonecny)- The gettext-devel is required by autogen (jkonecny)- Remove kickstart-test dependencies from test requires (jkonecny)
* Tue Dec 12 2017 Martin Kolman - 28.13-1- Unregister and unpublish all DBus services and objects (vponcova)- Add tests for InstallManager (jkonecny)- Add tests for Tasks (jkonecny)- Add run_in_glib decorator for tests (jkonecny)- Instantiate and publish InstallManager in Boss (jkonecny)- Add Makefile for install_manager (jkonecny)- Implement InstallManager with interface (jkonecny)- Init threading in modules (jkonecny)- Provide installation tasks from modules (jkonecny)- Remove
*.Anaconda.Modules interface from Boss (jkonecny)- Implementing example tasks for modules (jkonecny)- Add Makefile for Task (jkonecny)- Base implementation of Task (jkonecny)- Add Task interface class (jkonecny)- Remove in-memory kickstart representation from traceback file (#1519895) (mkolman)- Support call_when_thread_terminates in ThreadManager (jkonecny)- Change gtk_action_wait/nowait as general use decorators (jkonecny)- Add controllable loop to run_boss_locally script (jkonecny)- Tweak run_boss_locally script (jkonecny)- Enable SE/HMC file access to repo (vponcova)- Change string formatting to format method (jkonecny)- Pass handler instance, not class to SplitKickstartParser (rvykydal)- Add kickstart parser for splitting kickstart (rvykydal)
* Thu Dec 07 2017 Martin Kolman - 28.12-1- Fix unit tests (mkolman)- Fixes in makefiles (vponcova)- Use the input_checking module for TUI password validation (mkolman)- Use the input_checking module for user checking (mkolman)- Use the input_checking module for root password checking (mkolman)- Use the input_checking module for checking the LUKS passphrase (mkolman)- Reflect GUISpokeInputCheckHandler changes in installation source spoke (mkolman)- Convert the input checking helpers to use the input_checking module (mkolman)- Provide more robust method of using the warning message bar (mkolman)- Remove the validatePassword() method (mkolman)- Add new input checking module (mkolman)- fixup! Migrate Workstation InstallClass to anaconda (sgallagh)- Handle an invalid install class style sheet (vponcova)- Enhance password checking constants (mkolman)- Fix interactive defaults (mkolman)- Modify the PYTHONPATH in run_boss_locally (vponcova)- Replace get_bus with the class DBus (vponcova)- Migrate Workstation InstallClass to anaconda (sgallagh)- Point at new path for fedora-server.css (sgallagh)- Rename dbus_constants to constants (vponcova)- Add the boot option inst.ks.all (vponcova)- Add the boot option inst.stage2.all (vponcova)- Remove errors for mounting and unmounting (vponcova)- Override the right method in the task (vponcova)- Remove useless code (vponcova)- Support timeout and retries options in %packages section (vponcova)- Fix device_name_is_disk to fully support raid devices (vponcova)- Onlyuse devices of the ignoredisk command should be only disks (vponcova)- Add the boot option inst.xtimeout (vponcova)- Do not shadow build-in module variable (jkonecny)- Module manager is replaceable (jkonecny)- Remove pyanaconda.constants_text module (vponcova)
* Mon Nov 27 2017 Martin Kolman - 28.11-1- Bump Blivet GUI version (mkolman)- Change path to start-module script when running locally (mkolman)- Handle DBUS module related files in makeupdates (mkolman)- Handle DBUS_STARTER_ADDRESS not being defined (mkolman)- Use start-module script in DBUS service files (mkolman)- Add a DBUS module startup script (mkolman)- Add Makefile.am for DBUS modules an addons (mkolman)- Add the setup-updates script (mkolman)- Add __init__.py file to anaconda/modules (mkolman)- Add a unit file for Boss startup (mkolman)- Really install all the right packages on Mac UEFI installs (awilliam)- Refactor DASD formatting and support detection of LDL DASDs. (vponcova)- Remove unused import sys from run_boss_locally script (jkonecny)- Fix blivet imports in the Fedora Server install class (#1513024) (vponcova)- Update the use of suggest_container_name method (vponcova)- Devicetree doesn\'t have protected_dev_names (vponcova)- Add pyanaconda.dbus to Makefile (vponcova)- Add pyanaconda.storage to Makefile (#1511735) (vponcova)- network: GUI, be more robust when displaying vlan parent and id (#1507913) (rvykydal)- network: GUI, fix lookup of existing device configurations (#1507913) (rvykydal)- network: GUI, don\'t crash on added vlan without device name specified (#1507913) (rvykydal)- Add a script for running Boss & modules locally (mkolman)- Add an example addon (mkolman)- Add DBUS module examples (mkolman)- Add Boss (mkolman)- Add a base class for DBUS modules (mkolman)- Add .service and .conf files for the DBUS modules (mkolman)- Add constants for DBUS module namespaces (mkolman)- Add support for logging from DBUS modules (mkolman)- Add the get_bus() method (mkolman)- Remove storage check for too small swap (#1466964) (vponcova)- Migrate fedora-server installclass into the anaconda repository (#1466967) (rvykydal)
* Thu Nov 09 2017 Martin Kolman - 28.10-1- Bump required Blivet version to 3.0 (mkolman)- Add modular server repo to the base repositories (#1506894) (jkonecny)- Split addon and environment refresh in software TUI (jkonecny)- Fix changing source don\'t erase old environment TUI (#1505090) (jkonecny)- Add logging to TUI software selection spoke (#1505090) (jkonecny)- Do not try to use protected disks for autopart (vtrefny)- Adapt new storage tui spoke to storage code move. (dlehman)- Update blivet upstream URL in testing README. (dlehman)- Adapt to devicefactory API change. (dlehman)- Adapt to removal of default rounding in blivet.size.Size. (dlehman)- Use anaconda\'s logic for ostree sys/physical root. (dlehman)- Adapt to removal of blivet.udev.device_is_realdisk. (dlehman)- Adapt to move of disklabel type logic into DiskLabel. (dlehman)- Move blivet.partspec into pyanaconda.storage. (dlehman)- Move blivet.platform to pyanaconda.platform. (dlehman)- Fix traceback from mocked partitions in clearpart test. (dlehman)- Move blivet.osinstall to pyanaconda.storage. (dlehman)- Move autopart from blivet to pyanaconda.storage. (dlehman)
* Thu Oct 26 2017 Martin Kolman - 28.9-1- Mac EFI installs need grub2-tools (#1503496) (awilliam)- network: create default ifcfg also for missing default NM connection (#1478141) (rvykydal)- Print screen stack next to exception in TUI (jkonecny)- Enable Custom GRUB2 Password Utility (#985962) (rmarshall)
* Tue Oct 17 2017 Martin Kolman - 28.8-1- Bump simpleline version requires (jkonecny)- Remove DataHolder class (jkonecny)- Remove EditTUISpoke EditTUIDialog and EditTUISpokeEntry (jkonecny)- Replace EditTUI
* from the TUI Storage spoke (jkonecny)- Replace EditTUI
* from the TUI User spoke (jkonecny)- Replace EditTUI
* from the TUI Source spoke (jkonecny)- Replace EditTUI
* from the TUI Network spoke (jkonecny)- Password spoke is using PasswordDialog now (jkonecny)- Return default policy if nothing match (jkonecny)- Add Dialog and PasswordDialog TUI objects (jkonecny)- Remove EditTUIDialog from time_spoke (jkonecny)- packaging: clear downloaded packages repo cache before using it (#1480790) (rvykydal)- Do substitutions only after translating the string (mkolman)- Fix a translation check error (mkolman)- Do not run commands in messages in Makefile (jkonecny)- Fix storage spoke completeness checking (#1496416) (rvykydal)
* Thu Oct 12 2017 Martin Kolman - 28.7-1- Mark the mount point assignment in TUI as experimental (vpodzime)- Reset storage on change in text mode (vpodzime)- Only allow the supported file systems in text mode (vpodzime)- Textual configuration of mount points (vpodzime)- Add support for the new \'mount\' kickstart command (vpodzime)- Fix dnf exception repository not set (#1495211) (jkonecny)- Add logging of complete spokes in GUI. (rvykydal)- Do not execute storage when the spoke is left with no selected disk (#1496327) (rvykydal)- Reflect building from master branch in the release docs (mkolman)- Add checks for group names (#1497676) (vponcova)- Add new checks for user names (#1491006) (vponcova)
* Fri Sep 29 2017 Martin Kolman - 28.6-1- Add changelog entries from the unstable branch (mkolman)- Log when we are executing command in chroot (jkonecny)- Use name instead of index in TUI env selection (#1495204) (jkonecny)- Fix missing container in TUI source spoke (#1494801) (jkonecny)- Add MOCK_EXTRA_ARGS to Makefile (jkonecny)- tui source spoke: initialize nfs values when switching to nfs (rvykydal)- Deselect encryption when switching to blivet-gui partitioning (vtrefny)- Add 2 spaces between functions in iutil (jkonecny)- rpmostreepayload: Fix logic for copying of EFI data (walters)- rpmostreepayload: Avoid recursing for fstab mounts (walters)- payload: Add handlesBootloaderConfiguration(), teach bootloader.py (walters)
* Thu Sep 21 2017 Martin Kolman - 28.5-1- Fix missing id to name environment transition (#1491119) (jkonecny)- Fix test for unset TUI software environment (#1491119) (jkonecny)- Rename processingDone to processing_done variable (jkonecny)
* Mon Sep 18 2017 Martin Kolman - 28.4-1- network: add support for kickstart --bindto=mac for virtual devices (#1328576) (rvykydal)- network: support mac bound network settings as first class (#1328576) (rvykydal)- network: add support for kickstart --bindto=mac for wired devices (#1328576) (rvykydal)- Don\'t setup the hub twice (#1491333) (vponcova)- rpmostreepayload: Substitute ${basearch} in ostreesetup ref (walters)- Perform repo checks only when there are checks available. (rvykydal)- Add support for repo --metalink (GUI) (#1464843) (rvykydal)- Add support for repo --metalink (kickstart, tui) (#1464843) (rvykydal)- Add inst.notmux option (dusty)
* Mon Sep 11 2017 Martin Kolman - 28.3-1- Add missing dot to the availability status message (mail)- Bump Simpleline version (jkonecny)- Make EFIGRUB._efi_binary a property, not a method (awilliam)- Better storing logs from build and tests (jkonecny)- Provide a default install class. (vponcova)- Do not use hidden install classes. (vponcova)- Make geolocation with kickstart possible (#1358331) (mkolman)- Run python-meh as modal in TUI (jkonecny)- Use GLib event loop in the simpleline (jkonecny)- TUI progress reporting is handled by show_all (jkonecny)- Add efi_dir to the BaseInstallClass (#1412391) (vponcova)- Use /usr/bin/python3 shebang once again (miro)
* Mon Sep 04 2017 Martin Kolman - 28.2-1- Fix catch TUI not main thread exceptions (jkonecny)- Document Anaconda branching workflow (mkolman)- Use constants for version number bumps and additions (mkolman)- Fix closest mirror now needs network (jkonecny)- Fix restart payload thread in Network spoke GUI (#1478970) (jkonecny)- Network spoke freeze when testing availability (#1478970) (jkonecny)- Add support for adding version numbers to makebumpver (mkolman)- Add support for major version bump to makebumpver (mkolman)- Fix proxy settings badly used when testing repos (#1478970) (jkonecny)
* Tue Aug 29 2017 Martin Kolman - 28.1-1- Remove the metacity theme. (vponcova)- Add the option inst.decorated to allow title bar in GUI (vponcova)- Move python3-gobject Requires to core (jkonecny)- Return simpleline removed ipmi calls back (jkonecny)- Use new list container from Simpleline (jkonecny)- Remove old simpleline from anaconda (jkonecny)- Ask multiple times for wrong input (jkonecny)- Show TUI exception only first time (jkonecny)- Add simpleline logger to the Anaconda (jkonecny)- Modify TUI to use new Simpleline package (jkonecny)- Make 64-bit kernel on 32-bit firmware work for x86 efi machines (pjones)- Add missing gtk3 required version to spec file (jkonecny)- Sort spec required versions alphabetically (jkonecny)- Fix testing of the kickstart version (vponcova)- Move the installclass command to the %anaconda section. (vponcova)- Fix SL install class to use right efi dir (riehecky)- Fix accelerator key for blivet-gui partitioning (#1482438) (vtrefny)- Add blivet-gui logs to python-meh file list (vtrefny)- Remove the title bar in anaconda by default (#1468801) (vponcova)- Add simple script to read journal with message code source and thread info. (rvykydal)
* Mon Aug 14 2017 Martin Kolman - 27.20-1- Add support for automatic generating of DBus specification. (vponcova)- Add support for generating XML (vponcova)- Add support for DBus typing system (vponcova)- dnfpayload: do not try to contact disabled repo (artem.bityutskiy)- Add message to setup-test-env is ran (jkonecny)- Use SHA256 instead of MD5 for repoMDHash (#1341280) (bcl)- Add lorax-packages.log to bug report. (rvykydal)- Use SHA256 instead of MD5 for repoMDHash (#1341280) (jkonecny)- 80-setfilecons: Add a few paths (/var/run, /var/spool) (walters)- Also capture anaconda-pre logs if they exist (riehecky)- Don\'t mock modules with sys in unit tests (vponcova)- logging: replace SyslogHandler with JournalHandler (rvykydal)- Add setup-test-env target to the Makefile (jkonecny)- Add tests for the install class factory (vponcova)- Support for the installclass kickstart command (vponcova)- Modules with install classes should define __all__ (vponcova)- Refactorization of the installclass.py (vponcova)- docs: minor fixups of release document (rvykydal)- rescue: add RTD documentation (rvykydal)- rescue: clean up method for mounting root (rvykydal)- rescue: separate UI and execution logic (rvykydal)- Make kickstart rescue command noninteractive. (rvykydal)- Remove unused argument and code. (rvykydal)
* Thu Jul 27 2017 Radek Vykydal - 27.19-1- rpmostreepayload: Set up /var first (walters)- rpmostreepayload: Explicitly create /var/lib before tmpfiles (walters)- rpmostreepayload: Rework mount setup to support admin-defined mounts (walters)- rpmostreepayload: try to verify local ostree repo cache (dusty)- rpmostreepayload: ignore * Mon Jul 03 2017 Martin Kolman - 27.18-1- rpmostreepayload: Reuse the local repo as a cache (walters)- Document how to create Anaconda releases and package builds (mkolman)
* Sat Jul 01 2017 Martin Kolman - 27.17-1- Require \"blivet-gui-runtime\" instead of \"blivet-gui\" (vtrefny)- Fix a typo in python-meh initialization (#1462825) (mkolman)
* Mon Jun 26 2017 Martin Kolman - 27.16-1- Install class shouldn\'t set the default boot fstype (#1463297) (vponcova)- Store testing logs properly (jkonecny)- Fix location of the blivet-gui user help (vtrefny)- netowrk: fix noipv6 option check regression (#1464297) (rvykydal)- Refactor imports in kickstart.py (jkonecny)- Use context manager to check KickstartError (jkonecny)
* Wed Jun 21 2017 Martin Kolman - 27.15-1- Honor --erroronfail kickstart option in cmdline mode (rvykydal)- Fix import from a renamed module (#1462538) (vponcova)- Fix the \'non-ASCII characters in password\' checks (#1413813) (awilliam)- Move mock config files to slaves (jkonecny)
* Thu Jun 15 2017 Martin Kolman - 27.14-1- Bump version of Pykickstart and Blivet (#1113207) (jkonecny)- Add XFS uuid changer (#1113207) (jkonecny)- Support --when parameter in snapshot (#1113207) (jkonecny)- Add snapshot support (#1113207) (jkonecny)
* Wed Jun 14 2017 Martin Kolman - 27.13-1- Fix source.glade renaming mixup (#1461469) (mkolman)- Separate blivet-daily builds in mock config (jkonecny)- network: bind to device name (not hwaddr) when dumping connections (#1457215) (rvykydal)
* Tue Jun 13 2017 Martin Kolman - 27.12-1- Show warning if swap is smaller then recommended (#1290360) (vponcova)
* Tue Jun 06 2017 Martin Kolman - 27.11-1- Fix renaming error (mkolman)- Add a getter for the Anaconda root logger (mkolman)- Disable test-install in Makefile (jkonecny)
* Thu Jun 01 2017 Martin Kolman - 27.10-1- Bump Blivet version (mkolman)- Remove GUI logging prefixes from Network spoke (mkolman)- Rename TUI spokes (mkolman)- Rename GUI spokes (mkolman)- Rename anaconda_argparse.py to argument_parsing.py (mkolman)- Rename install_tasks.py to installation_tasks.py (mkolman)- Rename install.py to installation.py (mkolman)- Rename threads.py to threading.py (mkolman)- Get special purpose loggers from anaconda_loggers (mkolman)- Use structured logging in Anaconda modules (mkolman)- Use unique 3 letter log level names (mkolman)- Use constants for special purpose logger names (mkolman)- Add the anaconda_loggers module (mkolman)- Rename anaconda_log.py to anaconda_logging.py (mkolman)- Add support for structured logging to the anaconda logger (mkolman)- Make it possible to set filters for file handlers (mkolman)- Add custom filter and formatter support for the syslog handler (mkolman)- Add AnacondaPrefixFilter (mkolman)- Fixes for Pylint 1.7 (vponcova)- Add support for IPoIB in tui (#1366935) (rvykydal)- Fix pylint unused import error (jkonecny)- network: handle multiple connections for one device better (#1444887) (rvykydal)- Fix setting errors and warnings in the StorageCheckHandler (vponcova)- Add inst.waitfornet option (#1315160) (rvykydal)- network: catch exception when reading in-memory connection being removed (#1439220) (rvykydal)
* Thu May 25 2017 Martin Kolman - 27.9-1- Add support for DNF-2.5.0 (jkonecny)- Fix simpleline_getpass related Pylint warning (mkolman)- Provide access to simpleline App instance (mkolman)- Make it possible to use a custom getpass() (mkolman)- Set the default filesystem type from a kickstart file (vponcova)- Adapt to our new daily builds of Anaconda (jkonecny)- Provide access to simpleline App instance (mkolman)- Make it possible to use a custom getpass() (mkolman)- Perform recursive copying of driver disk RPM repo contents (esyr)- network: fix setting hostname via boot options (#1441337) (rvykydal)- Fix a typo in an error message (esyr)- Use the function we already have for applying disk selection (#1412022) (rvykydal)- Ignore disks labeled OEMDRV (#1412022) (rvykydal)- network: create dracut arguments for iSCSI root accessed via vlan (#1374003) (rvykydal)- Test if Anaconda can be installed inside of mock (jkonecny)- Remove run_install_test test (jkonecny)- rpmostreepayload: Handle /var as a user-specified mountpoint (walters)- Fix the addon handlers for the checkbox (#1451754) (vponcova)- Show the text of completions in the datetime spoke. (vponcova)- Use new daily-blivet copr builds (jkonecny)- Prevent TUI from crashing with a single spoke on a hub (mkolman)
* Tue May 09 2017 Martin Kolman - 27.8-1- Bump Pykickstart version (mkolman)
* Fri May 05 2017 Martin Kolman - 27.7-1- Make some missed adjustments to blivet API changes. (#1440134) (dlehman)- Bump required version for blivet-gui (vtrefny)- BlivetGuiSpoke: Set keyboard shortcuts for blivet-gui (#1439608) (vtrefny)- BlivetGuiSpoke: Refresh blivet-gui UI after spoke is entered (vtrefny)- Really fix with tmux 2.4 (version comparison was busted) (awilliam)- Show or hide the content of the expander on Fedora (vponcova)- itertools.chain can be iterated only once (#1414391) (vponcova)
* Fri Apr 28 2017 Martin Kolman - 27.6-1- Use `time.tzset()` to apply timezone changes when we can (awilliam)- Tweak epoch definition to fix system clock setting (#1433560) (awilliam)- Optimize payload thread restart on network change (jkonecny)- Add unit test for RepoMDMetaHash object (#1373449) (jkonecny)- Make the formating in payload consistent (#1373449) (jkonecny)- Fix Anaconda forces payload restart when network (not)change (#1373449) (jkonecny)- Catch race-condition error reading from in-memory connection being removed (#1373360) (rvykydal)- network tui: fix changing ipv4 config from static to dhcp (#1432886) (rvykydal)- Allow setting up bridge for fetching installer image from kickstart (#1373360) (rvykydal)
* Thu Apr 27 2017 Martin Kolman - 27.5-1- make anaconda working back again with tmux2.4 (pallotron)- Trigger the entered signal only once the screen is shown (#1443011) (mkolman)- Use constants in storage checker constraints. (vponcova)- Gtk: Fix creating images from resources. (vponcova)- Fix partial kickstart software selection in GUI (#1404158) (jkonecny)- Removed unused code in the Software spoke (#1404158) (jkonecny)- Fix selection logic in Software spoke (#1404158) (jkonecny)- Fix Driver Disc documentation (#1377233) (jkonecny)- Support DD rpm loading from local disk device (#1377233) (jkonecny)- Gtk: Replace deprecated get_misc_set_alignment in widgets. (vponcova)- Gtk: Replace deprecated Gtk.Viewport.get_v/hadjustment. (vponcova)- Gtk: Replace deprecated methods. (vponcova)- Set the info bar only once if the partitioning method changes. (vponcova)- Fix pylint issue Catching too general exception Exception (jkonecny)- Support --noboot and --noswap options in autopartitioning (#1220866) (vponcova)- Support --nohome option in the autopartitioning (vponcova)
* Tue Apr 11 2017 Martin Kolman - 27.4-1- Hide options based on storage configuration method (#1439519) (mkolman)- Catch exception when reading from in-memory connection being removed (#1439051) (rvykydal)- docs/boot-options.rst: Fix #dhcpd anchor (mopsfelder)- docs/boot-options.rst: Remove trailing spaces (mopsfelder)- Fix logging of the storage checker report. (vponcova)- Fix a property name of luks devices in storage checking (#1439411) (vponcova)- Bump required version for blivet-gui (vtrefny)- Use newly created swaps after the installation (#1439729) (vtrefny)- docs/boot-options.rst: Fix #dhcpd anchor (mopsfelder)- docs/boot-options.rst: Remove trailing spaces (mopsfelder)- Set default FS type for blivet-gui (#1439581) (vtrefny)- Display progress for the post installation phase (mkolman)- Display progress for the post installation phase (mkolman)- Increase verbosity of lvmdump in pre logging script (#1255659) (jkonecny)
* Thu Mar 30 2017 Martin Kolman - 27.3-1- Enable the install class to customize the storage checking (vponcova)- Replace sanity check with more advanced storage checker (vponcova)- Various log-capture script improvements (mkolman)- Rename StorageChecker to StorageCheckHandler (vponcova)
* Thu Mar 16 2017 Martin Kolman - 27.2-1- Correction of some typographic mistakes in documentation. (rludva)- Fix bullet point formatting in contribution guidelines (mkolman)- Propagate firstboot --disable to Screen Access Manager (mkolman)- util: Add script to capture logs (riehecky)- Fix a typo (mkolman)- Correction of some typographic mistakes in documentation. (rludva)- Enhance git-find-branch script (jkonecny)- Improve how storage configuration settings are displayed (mkolman)- util: Add script to capture logs (riehecky)- Propagate firstboot --disable to Screen Access Manager (mkolman)
* Mon Mar 06 2017 Martin Kolman - 27.1-1- We should not have pyanaconda submodules on PYTHONPATH (vponcova)- Lock empty root password during kickstart installation (#1383656) (mkolman)- Use system Python when running Anaconda (mkolman)- Remove unused false positives for pylint (vtrefny)- Fix pylint error in BlivetGUI spoke (vtrefny)- Fix tests by renaming packaging to payload (jkonecny)- Rescue mode should wait for the storage and luks devices (#1376638) (vponcova)
* Mon Feb 27 2017 Martin Kolman - 26.21-1- Add blivet-gui as requirement for the GUI package (vtrefny)- Add a bottom bar to the Blivet GUI spoke (mkolman)- Hide storage config spokes marked by SAM as visited (mkolman)- Keep last used partitioning method selected (mkolman)- Rollback planned storage changes if partitioning method changes (mkolman)- Add blivet-gui spoke (vpodzime)- docs: fix formating a bit for Links (Frodox)- Fix a typo (mkolman)- Polish unsupported filesystems in the custom spoke (jkonecny)
* Tue Feb 07 2017 Martin Kolman - 26.20-1- Update dracut test for network --ipv6gateway (rvykydal)- Correctly propagate --ipv6gateway to ifcfg files(#1170845) (mkolman)- network: respect --activate value for bridge from kickstart (rvykydal)- network: fix --activate for bridge slaves configured via %pre ks (rvykydal)- network: activate bridge for first network command in ks via %pre (rvykydal)- network: unify slave connection names for ks %pre with ks and gui (rvykydal)- network: bind slave connections to DEVICE, not HWADDR (#1373360) (rvykydal)- Do not allow creating ntfs filesystem in custom spoke (vtrefny)- Various minor formatting fixes (mkolman)- PEP8 and refactoring for packaging (mkolman)- PEP8 and refactoring for vnc.py (mkolman)- PEP8 and refactoring for storage_utils.py (mkolman)- PEP8 and refactoring for network.py (mkolman)- PEP8 and refactoring for kickstart.py (mkolman)- PEP8 and refactoring for image.py (mkolman)- Cosmetic PEP8 and refactoring for flags.py (mkolman)- PEP8 and refactoring for exception.py (mkolman)- PEP8 and refactoring for bootloader.py (mkolman)- PEP8 and refactoring for anaconda_log.py (mkolman)- Validate dasd and zfcp user input (#1335092) (vponcova)- network: use introspection data from libnm instead of libnm-glib (lkundrak)
* Mon Jan 16 2017 Martin Kolman - 26.19-1- Use initialization controller for spoke initialization (mkolman)- Add module initialization controller (mkolman)- Fix link to the documentation in the README file (jkonecny)- There is no thread for dasd formatting in tui. (vponcova)- Move the (mkolman)- Fix the status of the StorageSpoke for dasd formatting (#1274596) (vponcova)
* Mon Jan 09 2017 Martin Kolman - 26.18-1- Always refresh the size of swap before autopartitioning. (vponcova)- Run the space check only if the spokes are complete (#1403505) (vponcova)- Ignore result directory with logs from tests (jkonecny)- Disable pylint no-member error for re.MULTILINE (jkonecny)- Fix nosetests to use newest python3 (jkonecny)- Disable the button if iscsi is not available (#1401263) (vponcova)- Include Python 3.6 sysconfigdata module in initramfs (#1409177) (awilliam)- Nicer __repr__ for hubs and spokes (mkolman)- Close the .treeinfo file after the retrieve. (vponcova)
* Wed Jan 04 2017 Martin Kolman - 26.17-1- Fix a GTK Widget related deprecation warning (mkolman)- Fix GTK screen/display related deprecation warnings (mkolman)- Fix GObject and GLib deprecation warnings (mkolman)- Fix selection of no software environment (#1400045) (vponcova)- Use signals for Spoke & Hub entry/exit callbacks (mkolman)- Fix the name of StorageDiscoveryConfig attribute (#1395350) (vponcova)- Iutil PEP8 & formatting fixes (mkolman)- Add inst.ksstrict option to show kickstart warnings as errors. (vponcova)- Use the structured installation task classes (mkolman)- Improved password quality checking (mkolman)- Add unit tests for password quality checking (mkolman)- Use Enum for password status constants (mkolman)- Use a sane unified password checking policy (mkolman)- Add install task processing classes and unit tests (mkolman)- Add a signal/slot implementation (mkolman)- Set correctly the default partitioning. (vponcova)
* Wed Dec 14 2016 Martin Kolman - 26.16-1- rpmostreepayload: Rework binds to be recursive (walters)- Let DNF do its own substitutions (riehecky)- Bump Blivet version due to systemd-udev dependency (mkolman)- Don\'t log \"Invalid bridge option\" when network has no --bridgeopts. (rvykydal)- Fix updating of bridge slave which is bond. (rvykydal)
* Mon Dec 05 2016 Martin Kolman - 26.15-1- Don\'t pass storage to firstboot.setup() (mkolman)- RTD fixes (mkolman)- Catch ValueError from LVM part in Blivet library (jkonecny)- Handle unexpected storage exception from blivet (jkonecny)- Add sudo to test requires (jkonecny)- network: fix network --noipv4 in %pre (rvykydal)- fix typo in systemd service keyword (mail)- Fix pylint issue in ks_version_test (jkonecny)- Move Anaconda tests to mock (jkonecny)- Add checks to git-find-branch script (jkonecny)- Remove intermediate pot files in po-push (mkolman)- Allow install classes to set alternate states for firstboot/initial-setup (riehecky)
* Wed Nov 23 2016 Martin Kolman - 26.14-1- Changed the required version of BlockDev to 2.0. (vponcova)- Remove auto generated documentation (mkolman)- Fix generated zanata.xml from https unstable branch (jkonecny)- Don\'t crash if the UIC file can\'t be written (#1375702) (mkolman)
* Wed Nov 23 2016 Martin Kolman - 26.13-1- Fix calling of can_touch_runtime_system function (jkonecny)- fix formating a bit (gitDeveloper)- Fix zanata.xml.in in substitution variables (mkolman)
* Thu Nov 17 2016 Martin Kolman - 26.12-1- Mock chroot environment is chosed by a git branch (jkonecny)- Set Zanata branch from git-find-branch script (jkonecny)- Add git-find-branch script for finding parent branch (jkonecny)- fix pykickstart docks link (gitDeveloper)- aarch64 now has kexec-tools (pbrobinson)- Resolve directory ownership (mkolman)- Fix user interaction config handling in image & directory install modes (#1379106) (mkolman)- tui: Available help system (vponcova)- network: index team slave connection names starting with 1 (rvykydal)
* Thu Nov 10 2016 Martin Kolman - 26.11-1- Relax blivet dependency to >= 2.1.6-3 (awilliam)- Bump required Blivet version (#1378156) (mkolman)- Fix bad exception handling from blivet in iscsi (#1378156) (jkonecny)- tui: New class for prompt (vponcova)- iSCSI: adjust to change in blivet auth info (#1378156) (awilliam)- Disable false positive pylint error (jkonecny)- Add some error checking when users don\'t provide input for DASD devices. (sbueno+anaconda)- Add some error checking when users don\'t provide input for zFCP devices. (sbueno+anaconda)- Fix tui timezone region selection by name (vponcova)
* Fri Nov 04 2016 Martin Kolman - 26.10-1- F26_DisplayMode was added by non-interactive mode (jkonecny)- Fix pyanaconda tests for display mode (jkonecny)- Fix parse-dracut to support new kickstart displaymode (jkonecny)- Add boot option inst.noninteractive to the docs (jkonecny)- Abort installation when Playload exc rise in a NonInteractive mode (jkonecny)- Support non interactive mode in standalone spokes (jkonecny)- Non-interactive mode support for Password and User spokes (jkonecny)- Raise NonInteractive exception in Hubs event loop (jkonecny)- Raise exception for noninteractive mode in Hub (jkonecny)- Add new pykickstart noninteractive mode (jkonecny)- Disable bad kickstart command on F25 (jkonecny)- Improve DNF error message to be more understandable (jkonecny)- tui: Add software group selection (vponcova)- use blivet iSCSI singleton directly in storage spoke (awilliam)- Correct deviceLinks to device_links (blivet renamed it) (awilliam)- Instantiate the zFCP object ourselves now. (#1384532) (sbueno+anaconda)- Fix the way DASD list is determined. (#1384532) (sbueno+anaconda)- Add tests for payload location picking (#1328151) (jkonecny)- Fix picking mountpoint for package download (#1328151) (jkonecny)- Improve packaging logs without DEBUG logging (jkonecny)
* Tue Oct 25 2016 Martin Kolman - 26.9-1- Move the collect() function to iutil (mkolman)- Update messiness level (mkolman)- PEP8 and general refactoring for the main anaconda.py (mkolman)- Move kickstart file parsing code to startup_utils (mkolman)- Don\'t directly import items from anaconda_log (mkolman)- Remove old useless code (mkolman)- Move the rescue ui startup code to the rescue module (mkolman)- Move set-installation-thod-from-anaconda code to startup_utils (mkolman)- Move the live startup code to startup_utils (mkolman)- Move code printing the startup note to startup_utils (mkolman)- Move the pstore cleanup function to startup_utils (mkolman)- Move the prompt_for_ssh function to startup_utils (mkolman)- Move logging setup to startup_utils (mkolman)- Move the geolocation startup code to a separate function (mkolman)- Unify addons path variable name (mkolman)- PEP 8 for startup_utils.py (mkolman)- PEP 8 for display.py (mkolman)- Move VNC startup checking to a separate function (mkolman)- Move imports to the top of the file in display.py (mkolman)- Refactor display mode handling (mkolman)- Move display setup & startup tasks out of anaconda.py (mkolman)- Remove main and extra Zanata pot files on master (jkonecny)- Remove main and extra pot files before zanata push (jkonecny)- Don\'t send intermediate pot files to zanata (gh#791) (awilliam)- Improve message to be clearer in rescue.py (jkonecny)- Add option to show password in password field (vponcova)- Generate a list of DASDs in GUI storage spoke. (#1378338) (sbueno+anaconda)- Echoing 4de0ec44bdf0f68545bb55bb5fea00464b65fcab May as well include the SL file (riehecky)- Fixup class name for CentOS install class (riehecky)- Fix a typo in SAM file header (mkolman)- Skip live image on usb when checking storage for mounted partitions (#1369786) (rvykydal)
* Mon Oct 03 2016 Martin Kolman - 26.8-1- Fix network spoke being incorrectly marked as mandatory (#1374864) (mkolman)
* Fri Sep 30 2016 Samantha N. Bueno - 26.7-1- Increse python3-blivet version to 1:2.1.5 (jkonecny)- Fix dnf.repo.Repo now requires dnf.conf.Conf (jkonecny)- Provides compatibility with DNF-2.0 (jmracek)
* Tue Sep 27 2016 Martin Kolman - 26.6-1- Don\'t deactivate all storage in anaconda-cleanup. (#1225184) (dlehman)- Stop setting ANACONDA udev environment variable. (#1225184) (dlehman)
* Tue Sep 27 2016 Martin Kolman - 26.5-1- Improved driver disk copying (#1269915) (mkolman)- Fix screenshot taking logic (#1327456) (mkolman)- Change blank lines to pep8 for Dracut DUD test (jkonecny)- Tweak lambda use in Dracut test (jkonecny)- Add Dracut test for reloading mod dependencies (jkonecny)
* Wed Sep 21 2016 Martin Kolman - 26.4-1- Fix NTP server list fetching when running in IS (#1374810) (mkolman)- rpmostreepayload: Clean up use of sysroot files a bit (walters)- rpmostreepayload: Fix remote handling to use correct sysroot (walters)
* Mon Sep 19 2016 Martin Kolman - 26.3-1- network: set onboot correctly for vlan on bond device in ks (#1234849) (rvykydal)- network: don\'t show ibft configured devices in UI (#1309661) (rvykydal)- iscsi: don\'t generate kickstart iscsi commands for offload devices (#1252879) (rvykydal)- iscsi: allow installing bootloader on offload iscsi disks (qla4xxx) (#1325134) (rvykydal)- network: adapt to changed NM ibft plugin enablement configuration (#1371188) (rvykydal)- network: don\'t activate bond/team devices regardless of --activate (#1358795) (rvykydal)- Fix traceback when payload have None as url (#1371494) (jkonecny)- Add new Dracut test and fix another ones (#1101653) (jkonecny)- Fix bug when we add set to list (#1101653) (jkonecny)- Add new helper script files to build system (#1101653) (jkonecny)- Document new helper scripts to the DriverDisk README (#1101653) (jkonecny)- Fix driver unload is disabling network settings (#1101653) (jkonecny)- dud: fix multiple inst.dd=http:// instances stalling in dracut (#1268792) (rvykydal)- network: fix ksdata generating for for non-active virtual devices (#1321288) (rvykydal)- network: update kickstart data also with bond bridge slaves (#1321288) (rvykydal)- network: add support for bridge bond slaves (#1321288) (rvykydal)- screen_access: Ensure we write config to real sysroot (walters)- Add release commit support to makebumpver (mkolman)- Makefile improvents for separate release commits & tarball creation (mkolman)- network: add support for --no-activate kickstart opton (#1277975) (rvykydal)- fixup! Add base.close() after base.do_transaction (RhBug:1313240) (jmracek)- Add base.close() after base.do_transaction (RhBug:1313240) (jmracek)
* Tue Sep 06 2016 Martin Kolman - 26.2-1- Add git merging examples to the contribution guidelines (mkolman)- network: don\'t stumble upon new Device.Statistics NM dbus iface (#1370099) (rvykydal)- Current Anaconda is not compatible with DNF 2.0.0 (jkonecny)- Filter out all merge commits from the changelog (mkolman)- Make it possible to override Zanata branch name (mkolman)- Switch to argparse & autodetect name, version and bug email address (mkolman)- Fix multi-inheritance (phil)- Fix replacement of deprecated DNF method (jkonecny)- Replace deprecated method of DNF (jmracek)- Static checker recommended improvements (mkolman)- Fix replacement of deprecated DNF method (jkonecny)- Replace deprecated method of DNF (jmracek)
* Mon Aug 29 2016 Samantha N. Bueno - 26.1-1- Fix a pylint no-member warning (mkolman)- Translate press-c-to-continue correctly in TUI (#1364539) (mkolman)- Fix bootDrive driveorder fallback (#1355795) (jkonecny)- Fix bootloader when re-using existing /boot part (#1355795) (jkonecny)- Add support for device specification variants (#1200833) (mkolman)- Revert \"Update zanata.xml for f25-devel branch.\" (sbueno+anaconda)- Update zanata.xml for f25-devel branch. (sbueno+anaconda)- Add option to override efi_dir (phil)- efiboot: stderr= is not an option to efibootmgr (phil)- Fix EFI grub1 case (phil)- Make Fedora module not so grabby (phil)- Add centos module to pyanaconda (phil)- network: don\'t require gateway for static ipv4 config in TUI (#1365532) (rvykydal)- Improve connection network change detection (jkonecny)- Revert \"Revalidate source only if nm-con-ed change settings (#1270354)\" (jkonecny)- Fix anaconda-pre.service wasn\'t properly installed (#1255659) (jkonecny)- Rename function for better consistency (#1259284) (rvykydal)- Update error message for consistency (#1259284) (rvykydal)- Add more specific username check messages also to gui (#1360334) (rvykydal)- fix style guide test false positive on username variable (#1350375) (rvykydal)- tui: use functions instead of fake REs for checking values (#1350375) (rvykydal)- tui: get proper index of entry we are handling in input (#1331054) (rvykydal)- tui: fix user name validity checking (#1350375) (rvykydal)- More descriptive message on invalid username (kvalek)- Fix another pep8 name issue (jkonecny)- iscsi: fix getting iscsi target iface of bound target (#1359739) (rvykydal)- Fix needsNetwork testing only additional repositories (#1358788) (jkonecny)- Fix restart payload only when repo needs network (#1358788) (jkonecny)- Cleanup remaining runlevel references (mkolman)- Clarify a nosave related log message (mkolman)- Use Screen Access Manager (mkolman)- Add screen entry/exit callbacks (mkolman)- Add screen access manager (mkolman)- A simple formatting fix (mkolman)- Fix another blivet-2.0 pep8 error (jkonecny)- Quickfix of failing test (japokorn)- Some docstring refactoring & typo fixes for the TUI base classes (mkolman)- Add a file about contributing. (sbueno+anaconda)- Store logs before anaconda starts (#1255659) (japokorn)- DD can now replace existing drivers (#1101653) (japokorn)- Use the F25 timezone kickstart command version (mkolman)- Use sshd-keygen.target instead of hardcoded sshd-keygen script (jjelen)- Make it possible to disable sshd service from running. (#1262707) (sbueno+anaconda)- Change bootloader boot drive fallback (jkonecny)- Fix of Python3x uncompatible commands (japokorn)- Add NTP server configuration to the TUI (#1269399) (mkolman)- Move the NTP server checking constants to constants.py (mkolman)- Use a constant for the NTP check thread name prefix (mkolman)- Fix another victim of the python 2->3 conversion. (#1354020) (dshea)- Attempt to unload modules updated by a driver disk (dshea)- Fix the processing of device nodes as driver disks (dshea)
* Fri Jul 08 2016 Brian C. Lane - 25.20-1- Allow kickstart users to ignore the free space error (dshea)- Stop kickstart when space check fails (bcl)- Service anaconda-nm-config is missing type oneshot (jkonecny)- Fix dhcpclass to work both via kickstart and the boot cmdline. (clumens)- network: handle also ifcfg files of not activated virtual devices (#1313173) (rvykydal)- network: check onboot value in ksdata, not NM connections (#1313173) (rvykydal)- network: do not activate device on kickstart --onboot=\"yes\" (#1341636) (rvykydal)
* Fri Jun 24 2016 Brian C. Lane - 25.19-1- hostname: don\'t set installer env hostname to localhost.localdomain (#1290858) (rvykydal)- hostname: add tooltip to Apply button (#1290858) (rvykydal)- hostname: fix accelerator collision (#1290858) (rvykydal)- hostname: don\'t set hostname in initrafms of target system (#1290858) (rvykydal)- hostname: set current hostname from target system hostname on demand (#1290858) (rvykydal)- hostname: suggest current hostname for storage containers (#1290858) (rvykydal)- hostname: don\'t set target system static hostname to current hostname (#1290858) (rvykydal)- network tui: do not activate device when setting its onboot value (#1261864) (rvykydal)- network tui: edit persistent configuration, not active connection (#1261864) (rvykydal)- network: validate netmask in tui (#1331054) (rvykydal)- Add wordwrap to text mode and use it by default (#1267881) (rvykydal)- Fix adding new VG in Custom spoke can\'t be applied (#1263715) (jkonecny)- Fix SimpleConfigFile file permissions (#1346364) (bcl)- Re-configure proxy when updateBaseRepo is called (#1332472) (bcl)
* Fri Jun 17 2016 Brian C. Lane - 25.18-1- Only use <> for markup (#1317297) (bcl)- Update iscsi dialog for Blivet 2.0 API change (bcl)- Use the signal handlers to set initial widget sensitivies (dshea)- Fix bad sensitivity on boxes in source spoke (jkonecny)- Fix install-buildrequires (bcl)- Added optional [/prefix] as pattern (kvalek)- Require network for network-based driver disks (dshea)- Add missing pkgs to install-buildrequires (#612) (phil)- Increase the required version of gettext (dshea)- Fix the name sensitivity in the custom spoke. (dshea)
* Fri Jun 10 2016 Brian C. Lane - 25.17-1- Revert \"Temporarily disable translations\" (bcl)- Change where to look for the iscsi object (#1344131) (dshea)- Fix old blivet identifiers (#1343907) (dshea)- Fix a covscan warning about fetch-driver-net (#1269915) (bcl)- Fix crash when NM get_setting
* methods return None (#1273497) (jkonecny)- Overwrite network files when using ks liveimg (#1342639) (bcl)- Stop using undocumented DNF logging API (bcl)- Use the LUKS device for encrypted swap on RAID (dshea)- Keep the subdir in driver disk update paths (dshea)- Warn about broken keyboard layout switching in VNC (#1274228) (jkonecny)- Make the anaconda-generator exit early outside of the installation environment (#1289179) (mkolman)
* Fri Jun 03 2016 Brian C. Lane - 25.16-1- Add a button to refresh the disk list. (dlehman)- Only try to restart payload in the Anaconda environment (mkolman)- Make current runtime environment identifiers available via flags (mkolman)- Display storage errors that cause no disks to be selected (#1340240) (bcl)- Fix the SourceSwitchHandler pylint errors differently. (clumens)- Fix pylint errors. (clumens)- Update the disk summary on Ctrl-A (dshea)- Revert \"Refresh the view of on-disk storage state every 30 seconds.\" (dlehman)- Refresh the view of on-disk storage state every 30 seconds. (dlehman)- Handle unsupported disklabels. (dlehman)- Use a blivet method to remove everything from a device. (dlehman)- Tighten up ResizeDialog._recursive_remove a bit. (dlehman)- Only look for partitions on partitioned disks. (dlehman)- NFS DDs installation now works correctly (#1269915) (japokorn)- Remove unused on_proxy_ok_clicked from Source spoke (jkonecny)- send all layouts to localed for keymap conversion (#1333998) (awilliam)- Small cleanup (mkolman)
* Fri May 27 2016 Brian C. Lane - 25.15-1- Resolve shortcut conflict between \"Desired Capacity\" and \"Done\" (yaneti)- network: don\'t crash on devices with zero MAC address (#1334632) (rvykydal)- Remove Authors lines from the tops of all files. (clumens)- Related: rhbz#1298444 (rvykydal)- New Anaconda documentation - 25.14 (bcl)- Catch DNF MarkingError during group installation (#1337731) (bcl)- Fix TUI ErrorDialog processing (#1337427) (bcl)- Clean up yelp processes (#1282432) (dshea)
* Fri May 20 2016 Brian C. Lane - 25.14-1- Temporarily disable translations (bcl)- Don\'t crash when selecting the same hdd ISO again (#1275771) (mkolman)
* Thu May 19 2016 Brian C. Lane - 25.13-1- Fix writeStorageLate for live installations (#1334019) (bcl)- Remove the locale list from zanata.xml (dshea)- Ditch autopoint. (dshea)- Ditch intltool. (dshea)- Rename fedora-welcome to fedora-welcome.js (dshea)- Fix UEFI installation after EFIBase refactor (bcl)- Fix error handling for s390 bootloader errors (sbueno+anaconda)- Deselect all addons correctly (#1333505) (bcl)- gui-testing needs isys to be compiled. (clumens)- Add more to the selinux check in tests/gui/base.py. (clumens)
* Fri May 13 2016 Brian C. Lane - 25.12-1- Add single language mode (#1235726) (mkolman)- Move default X keyboard setting out of the Welcome spoke (mkolman)- Rerun writeBootLoader on Live BTRFS installs (bcl)- Check for mounted partitions as part of sanity_check (#1330820) (bcl)- Merge pull request #620 from dashea/new-canary (dshea)- Update the required pykickstart version. (dshea)- Implement %packages --excludeWeakdeps (#1331100) (james)- Fix bad addon handling when addon import failed (jkonecny)- Add retry when downloading .treeinfo (#1292613) (jkonecny)- Return xprogressive delay back (jkonecny)- Change where tests on translated strings are run. (dshea)- Merge the latest from translation-canary (dshea)- Squashed \'translation-canary/\' changes from 5a45c19..3bc2ad6 (dshea)- Add new Makefile target for gui tests (atodorov)- Define missing srcdir in run_gui_tests.sh and enable coverage (atodorov)- Split gui test running out into its own script. (clumens)- Look higher for the combobox associated with an entry (#1333530) (dshea)- Use createrepo_c in the ci target. (dshea)- Compile glib schema overrides with --strict. (dshea)
* Fri May 06 2016 Brian C. Lane - 25.11-1- Don\'t join two absolute paths (#1249598) (mkolman)- Don\'t crash when taking a screenshot on the hub (#1327456) (mkolman)- Fix pylint errors. (phil)- Factor out common grub1/grub2 stuff into mixin, and other factoring (phil)- Add GRUB1 (legacy) support back to Anaconda (phil)
* Fri Apr 29 2016 Brian C. Lane - 25.10-1- Handle unmounting ostree when exiting (bcl)- ostree: Use bind mounts to setup ostree root (bcl)- ostree: Skip root= setup when using --dirinstall (bcl)- disable_service: Specify string format args as logging params. (clumens)- Ignore failure when disable services that do not exist (phil)- Get rid of an unused variable in the network spoke. (clumens)- Revalidate source only if nm-con-ed change settings (#1270354) (jkonecny)- Merge solutions for test source when network change (#1270354) (jkonecny)- Changes in network state revalidate sources rhbz#1270354 (riehecky)
* Wed Apr 27 2016 Brian C. Lane - 25.9-1- Use the iutil functions for interacting with systemd services. (dshea)- Add methods to enable and disable systemd services. (dshea)- Do not add .service to the end of service names. (dshea)- Remove detach-client from tmux.conf (dshea)- Use Blivet 2.0 for set_default_fstype (#607) (sgallagh)- Remove dnf from the list of required packages. (#605) (dshea)- Add access to the payload from addons (#1288636) (jkonecny)- Disable pylint warnings related to the log handler fixer. (dshea)- Allow the metacity config dir to be overriden. (dshea)- Do not include /usr/share/anaconda files in the gui package. (dshea)- Work around logging\'s crummy lock behavior. (dshea)- Use rm -r to remove the temporary python site directory. (dshea)- Remove the subnet label for wired devices. (#1327615) (dshea)- Fix how unusued network labels are hidden (#1327615) (dshea)- Remove yum_logger (bcl)- Remove the lock loglevel (bcl)- Use a temporary user-site directory for the tests. (dshea)- Build everything for make ci. (dshea)- Ignore some E1101 no-member errors when running pylint (bcl)- Sprinkle the code with pylint no-member disable statements (bcl)- Catch GLib.GError instead of Exception (bcl)- Update storage test for Blivet 2.0 API change. (bcl)- Initialize missing private methods in BasePage class (bcl)- Update kickstart.py for Blivet 2.0 API change. (bcl)- Use namedtuple correctly in kexec.py (bcl)- Add more requires to make password checking still work. (#1327411) (dshea)- Rename isS390 to match the renames in blivet. (dshea)- Suppress signal handling when setting zone from location (#1322648) (dshea)- Refresh metadata when updates checkbox changes (#1211907) (bcl)
* Fri Apr 15 2016 Brian C. Lane - 25.8-1- network: handle null wireless AP SSID object (#1262556) (awilliam)- Change new_tmpfs to new_tmp_fs. (clumens)- Add support for kickstart %onerror scripts. (clumens)- Show network spoke in the TUI reconfig mode (#1302165) (mkolman)- network: copy static routes configured in installer to system (#1255801) (rvykydal)- network: fix vlan over bond in kickstart (#1234849) (rvykydal)- network: use NAME to find ifcfg on s390 with net.ifnames=0 (#1249750) (rvykydal)- Get rid of the reimport of MultipathDevice. (clumens)- Fix iSCSI kickstart options aren\'t generated (#1252879) (jkonecny)- Fix adding offload iSCSI devices (vtrefny)- Make the list-harddrives script mode robust (mkolman)
* Fri Apr 08 2016 Brian C. Lane - 25.7-1- Blivet API change getDeviceBy
* is now get_device_by_
* (bcl)- network: don\'t set 803-3-ethernet.name setting (#1323589) (rvykydal)- Log non-critical user/group errors (#1308679) (bcl)- Fix btrfs metadata raid level kwarg. (dlehman)- docs: Add release building document (bcl)- Minor improvements - README and test dependencies (atodorov)- Add more matches for network connectivity (atodorov)
* Mon Apr 04 2016 Brian C. Lane - 25.6-1- Remove an unused import from anaconda-cleanup. (clumens)- Don\'t use booleans in Requires (#1323314) (dshea)- Set CSS names on all of the anaconda classes. (#1322036) (dshea)- Don\'t crash if no groups are specified (#1316816) (dshea)- Fix only one address is shown in anaconda (#1264400) (jkonecny)- Fix call to update optical media format. (#1322943) (dlehman)- Reset invalid disk selection before proceeding. (dlehman)- Multiple Dogtail tests improvements (atodorov)- Do not allow liveinst with --image or --dirinstall (#1276349) (dshea)- New Anaconda documentation - 25.5 (bcl)
* Wed Mar 30 2016 Brian C. Lane - 25.5-1- Don\'t provide subclasses of the multipath or dmraid commands. (clumens)- Add support for chunksize raid kickstart parameter. (vtrefny)- Convert to blivet-2.0 API. (dlehman)
* Thu Mar 24 2016 Brian C. Lane - 25.4-1- Require that the English locale data be available. (#1315494) (dshea)- Revert \"Change the default locale to C.UTF-8 (#1312607)\" (#1315494) (dshea)- Make windows in metacity closable (#1319590) (dshea)- Fix the use of CSS psuedo-classes in the widgets. (dshea)- Add reason when logging invalid repository (#1240379) (jkonecny)
* Sat Mar 19 2016 Brian C. Lane - 25.3-1- Apply language attributes to all labels within anaconda. (dshea)- Add a function to apply a PangoAttrLanguage to a label. (dshea)- Add functions to watch changes to a container widget. (dshea)- Switch to the adwaita icon theme. (dshea)- Fix duplicate network settings in dracut (#1293539) (jkonecny)- Fix create device with bad name when parsing KS (#1293539) (jkonecny)- Use a lock for repoStore access (#1315414) (bcl)- Add missing inst prefix to the nokill option in docs (mkolman)- Merge pull request #551 from wgwoods/master-multiple-initrd-dd-fix (wwoods)- fix multiple inst.dd= args (rhbz#1268792) (wwoods)
* Fri Mar 11 2016 Brian C. Lane - 25.2-1- Load the system-wide Xresources (#1241724) (dshea)- Use an icon that exists in Adwaita for the dasd confirmation (dshea)- Make it possible to skip saving of kickstarts and logs (#1285519) (mkolman)- Add a function for empty file creation (#1285519) (mkolman)- Run actions for argparse arguments (#1285519) (mkolman)
* Wed Mar 09 2016 Brian C. Lane - 25.1-1- don\'t install kernel-PAE on x86_64 (#1313957) (awilliam)- except block in py3.5 undefines the variable (bcl)- Remove some history from the liveinst setup. (dshea)- Do not run the liveinst setup if not in a live environment. (dshea)- Set GDK_BACKEND=x11 before running anaconda from liveinst. (dshea)- Run zz-liveinst as an autostart application (dshea)- Translate the help button. (dshea)- Translate the required space labes in resize.py (dshea)
* Fri Mar 04 2016 Brian C. Lane - 25.0-1- Add device id to dasdfmt screen. (#1269174) (sbueno+anaconda)- Unify displayed columns in custom spoke dialogs. (#1289577) (sbueno+anaconda)- Show some confirmation to users if adding a DASD was successful. (#1259016) (sbueno+anaconda)- Hotfix for missing storage in payload class (#1271657) (jkonecny)- Check to see if DD repo is already in addOn list (#1268357) (bcl)- Use the default levelbar offset values. (dshea)- Do not change the GUI language to a missing locale. (#1312607) (dshea)- Don\'t crash when setting an unavailable locale (#1312607) (dshea)- Change the default locale to C.UTF-8 (#1312607) (dshea)- Update the libtool version-info. (dshea)- Use CSS to style the internal widgets. (dshea)- Move the widgets pixmaps into resources. (dshea)- Add a resource bundle to libAnacondaWidgets (dshea)- Rename show_arrow and chosen_changed to show-arrow and chosen-changed (dshea)- Remove an invalid transfer notation. (dshea)- Stop using SGML in the docs. (dshea)- Change the install test URL. (dshea)- Fix nfs source crash when options change (#1264071) (bcl)- makebumpver: Add a --dry-run option (bcl)- NTP should have better behavior (#1309396) (jkonecny)- Manually set clock shifts on UI idle (#1251044) (rmarshall)- Don\'t remove selected shared part when Delete all (#1183880) (jkonecny)- Don\'t delete shared/boot parts in deleteAll (#1183880) (jkonecny)
* Fri Feb 19 2016 Brian C. Lane - 24.13-1- tests/gui enhancements (atodorov)- Fix gui tests for anaconda move to anaconda.py (atodorov)- Use a different ipmi command to log events. (clumens)- Clarify that a string in list-screens is actually a regex. (clumens)- Merge pull request #513 from wgwoods/update-dd-docs (wwoods)- updated driver updates docs (wwoods)- Add specification for the user interaction config file (mkolman)- Update zanata webui URL in translation doc. (dlehman)- Tweak partition removal in Custom spoke (jkonecny)- Do not skip evaluation after removing partitions (jkonecny)- Import iutil earlier so we can use ipmi_report from check_for_ssh. (clumens)- Make disconnect_client_callbacks more resilient (#1307063). (clumens)- Move the langpacks install into to a separate function. (dshea)- Fix _find_by_title method in Accordion (jkonecny)
* Fri Feb 12 2016 Brian C. Lane - 24.12-1- Use host storage for directory or image install dnf download (bcl)- Log payloadError so we know why installation failed. (bcl)- Add the addons directory to the rpm. (dshea)- Use the packaged version of ordered-set (dshea)- Remove an unused import (dshea)- Add an uninstall hook for the renamed anaconda (dshea)- Make langpack work in DNF (#1297823) (jsilhan)- New Anaconda documentation - 24.11 (bcl)
* Fri Feb 05 2016 Brian C. Lane - 24.11-1- Fix makeupdates for anaconda move to anaconda.py (bcl)- Rename ./anaconda to ./anaconda.py to work around coverage.py #425 (atodorov)- Remove special handling for interruptible system calls. (dshea)- Handle PEP 3101 strings in the gettext context check (dshea)- Improve RHS summary strings in multiselection (#1265620) (jkonecny)- Increase GI version required of AnacondaWidgets (jkonecny)- Increment version of g-introspection for widgets (jkonecny)- Increment the AnacondaWidgets version (jkonecny)- Switch to the new Initial Setup unit name (#1299210) (mkolman)- Uncomment self.check_lang_locale_views in tests/gui/ (atodorov)- Add dogtail to test requirements (atodorov)- Add config for easier combining of kickstart and Jenkins coverage data (atodorov)- Apply the fallback style to anaconda selectors. (dshea)- Redo the stylesheet for Gtk 3.19+ (dshea)- Directly overwrite /usr/share/anaconda/anaconda-gtk.css (dshea)- Merge pull request #463 from dashea/translation-tests (dshea)- Display the name of the addon while executing it (bcl)- Add page selection summary to the right side (#1265620) (jkonecny)- Ask when removing new items in multiselection (#1265620) (jkonecny)- Add multiselection with SHIFT key (#1265620) (jkonecny)- Use show_arrow feature implemented in Selector (#1265620) (jkonecny)- Add new property to show/hide arrow in Selector (#1265620) (jkonecny)- Change selection logic when opening Page (#1265620) (jkonecny)- Add new BasePage class (#1265620) (jkonecny)- Add signal and methods to MountpointSelector (#1265620) (jkonecny)- Fix errors with multiselection (#1265620) (jkonecny)- Accordion class now process events for selectors (#1265620) (jkonecny)- Change cammel case for accordion.py to new pep8 (jkonecny)- Move selection logic from custom spoke to accordion (#1265620) (jkonecny)- Modify ConfirmDeleteDialog now the checkbox is optional (#1265620) (jkonecny)- Multiselection works in GUI with remove (#1265620) (jkonecny)- Add multiselection to Accordion with control key (#1265620) (jkonecny)- Remove bad translations from the source tarball. (dshea)- Treat warnings from xgettext as errors. (dshea)- Run translation-canary tests from make check. (dshea)- Do not run pylint on translation-canary (dshea)- Squashed \'translation-canary/\' content from commit 5a45c19 (dshea)
* Fri Jan 29 2016 Brian C. Lane - 24.10-1- Add a finished method to spokes (#1300499) (bcl)- Handle DeviceConfiguration with con = None (#1300499) (bcl)- Log detailed information about installed packages (bcl)- s/KickstartValueError/KickstartParseError. (clumens)- Move requiredDeviceSize to the main Payload class (#1297905) (dshea)
* Fri Jan 08 2016 Brian C. Lane - 24.9-1- Handle unexpected DNF exit (bcl)- Fix bad space needed messages (jkonecny)- nosetests-3.5 is now the right version. (clumens)- Ignore a pylint error about how we\'re using Popen (dshea)- Mark an unused variable as unused (dshea)- Ignore type-related errors for types pylint can\'t figure out (dshea)- Import errors are just regular errors now (dshea)- Replace the remaining log.warn calls with log.warning. (dshea)- Fix an erroneously bare raise statement (dshea)- Replace the deprecated assertEquals with assertEqual (dshea)- Don\'t add a None to the list of things to unmount on ostree installs. (clumens)
* Wed Dec 02 2015 Brian C. Lane - 24.8-1- Fix pylint problems in the gui testing code. (clumens)- Merge 9c5e02392d0401a3bd0adecedea03535595773ef into 67b569253c724639c2490f5fab70f7111f699b3f (atodorov)- Fix the replacement suggestion for \"hostname\" (dshea)- Automatically generate sr (dshea)- Fix PropertyNotFoundError PermHwAddress (#1269298) (jkonecny)- Make sure python3.5 code can run in early initrd (bcl)- Replace .delete() with .remove() in user.py (sujithpandel)- Rename everything that still refers to LiveCD (atodorov)- Updates to progress and storage tests (atodorov)- Multiple changes to DogtailTestCase (atodorov)- Move all Python files into the main gui/ directory (atodorov)- Simplify tests by removing OutsideMixin and update Creator (atodorov)- Modify existing tests to match latest anaconda behavior and environment (atodorov)- Temporary disable test code which doesn\'t work (atodorov)- Make tests/gui/ execute ./anaconda from git (atodorov)- Add window title (#1280077) (mkolman)- Replace execReadlines with check_output in parse-kickstart_test.py (bcl)- Fix a spelling error in the hardware error message (#1284165). (clumens)
* Wed Nov 18 2015 Brian C. Lane - 24.7-1- Collect test-suite.log from all \'make check\' invocations. Closes #452 (atodorov)- Fix parse-kickstart_test.py. (clumens)- Remove mkdud.py. (clumens)- Remove the kickstart_tests directory. (clumens)- Always quote values in ifcfg- files (#1279131) (bcl)- Include original kickstart in /root/original-ks.cfg (#1227939) (bcl)- strip spaces from extlinux label and default (#1185624) (bcl)- Report kernel failures during kickstart tests. (clumens)- Make sure unicode in kickstart works. (dshea)- Set the window icon (dshea)- Only run space check in TUI if spokes are complete. (#1279413) (sbueno+anaconda)- Allow a user\'s primary group to be created in --groups (#1279041) (dshea)- Remove uses of broad-except. (dshea)- Add a test for all that container minimization stuff. (clumens)- Use the partition command in one of the kickstart_tests. (clumens)- Don\'t clear the _currentIsoFile if another iso was selected (bcl)- makeupdates: Include utils/handle-sshpw (bcl)- Add --sshkey to kickstart sshpw command (#1274104) (bcl)- Split exception description from exception traceback (jkonecny)- Show DNF exception instead of silent exit (jkonecny)- Combine results from all gettext_tests into one log file (atodorov)- Try to run make ci with real translations. (dshea)- Untranslate undisplayed TreeView column headers. (dshea)- Add a test for hidden translatable strings (dshea)- Add the translated string to markup error messages. (dshea)- Test glade translations by default (dshea)- Change the way glade tests are run. (dshea)- Remove the accelerator test. (dshea)- Add the test lib directory to $PYTHONPATH in the commit hook (dshea)- network: create ifcfg files in tui if needed (#1268155) (rvykydal)- Do not limit ONBOOT default setting to url and nfs installation methods (#1269264) (rvykydal)- ibft: fix setting dracut boot args for static ibft nic configuration (#1267526) (rvykydal)- network: Don\'t set --device link default for hostname only network cmd (#1272274) (rvykydal)- network: assume --device=link as default also for ks on hd (#1085310) (rvykydal)- network: use ibftx interface for iSCSI from iBFT in dracut (#1077291) (rvykydal)- network: add s390 options to default ifcfg files (#1074570) (rvykydal)
* Fri Nov 06 2015 Brian C. Lane - 24.6-1- Fix a pylint error in the previous commits. (clumens)- Honor ANACONDA_WIDGETS_OVERRIDES (atodorov)- Load anaconda-gtk.css from ANACONDA_DATA if specified (atodorov)- Use the correct path for ui categories (atodorov)- Typo fix, it\'s ANACONDA_WIDGETS_DATA not ANACONDA_WIDGETS_DATADIR (atodorov)- Allow wired network properties more grid space. (dshea)- Improve language selection at low resolutions. (dshea)- Make reclaim work with small screens and big labels (dshea)- allow repo with only a name if it\'s a pre-defined one (#1277638) (awilliam)- Only raise thread exceptions once (#1276579) (bcl)- Use py3.4 crypt and salt (bcl)- Be more careful with incomplete device types (#1256582) (dshea)- Fix an import error in rpmostreepayload.py. (clumens)- Fix Testing docs inclusion in Sphinx (bcl)- Ignore interfaces with invalid VLAN IDs. (dshea)- Cleaner logging of .treeinfo return conditions in dependant function. (riehecky)- Update link to upstream kickstart docs (opensource)- rpmostreepayload: Also unmount internal mounts during shutdown (walters)- rpmostreepayload: Fix two issues with mounting (walters)- Add a README for kickstart tests. (clumens)- Make the documentation match the environment variable. (clumens)- Check that cache PVs (if any) are in the VG the LV belongs to (#1263258) (vpodzime)- Fix the alignment of the \"Label\" label in custom (dshea)- Use unsafe caching during kickstart tests. (clumens)
* Wed Oct 28 2015 Brian C. Lane - 24.5-1- Improve install space required estimation (#1224048) (jkonecny)- Update the on-disk snapshot of storage when adv. disks are added (#1267944) (vpodzime)- Check that ipv6 kickstart outputs the right ip= (dshea)- Change a variable name for pylint. (dshea)- Do not run time_initialize for image and directory installations (#1274103) (bcl)- Remove unused properties (dshea)- Do not modify the kickstart user data until apply() (dshea)- Make AdvancedUserDialog.run() more readable (dshea)- Improve the behavior of the home directory input. (dshea)- Stop setting inappropriate properties in ksdata. (dshea)- Update the password strength bar during the password strength check. (dshea)- Remove unnecessary grab_focus and set_sensitive calls (dshea)- Use signal handlers in the user spoke more sensibly. (dshea)- Fix potential issues with the username guesser. (dshea)- Make kickstart tests growing LVs stricter (vpodzime)- Point coverage.py to the full path of pyanaconda/ (atodorov)- Don\'t set BOOTPROTO= when it isn\'t set (jbacik)- Pass strings to blockdev.dasd_format, not a DASDDevice object. (#1273553) (sbueno+anaconda)- Revert \"Use yum to install the mock buildroot for now.\" (dshea)- decode package name for /etc/sysconfig/kernel (RHBZ #1261569) (awilliam)- Add tests for the more complicated command line options (dshea)- Store fewer kinds of things in the dirinstall option. (dshea)- Fix the parsing of selinux=0 (#1258569) (dshea)- Include a local $ANACONDA_DATADIR in the test environment. (dshea)- Move the command line arguments to anaconda_argparse. (dshea)- Don\'t crash while logging binary output. (dshea)- Decode program output even if there is no output (#1273145) (dshea)- Add a test for _run_program with binary output (dshea)- Test execWithCapture when the command outputs nothing. (dshea)- Fix a long line in kickstart_tests/functions.sh. (clumens)- Merge pull request #414 from vpodzime/master-lvm_log (vpodzime)- Save the lvm.log Blivet may produce (vpodzime)
* Fri Oct 16 2015 Brian C. Lane - 24.4-1- Hide the places sidebar in the ISO chooser widget. (dshea)- Use GtkResponseType values in the iso chooser dialog (dshea)- Do not use deprecated getDevicesByInstance method (vtrefny)- By default, skip those kickstart tests we know to be failing. (clumens)- Fix pylint unused import (jkonecny)- network: handle bridge device appearing before its connection (#1265593) (rvykydal)- Use $KSTEST_URL in tests that still had dl.fp.o hardcoded. (dshea)- Support CONNECT in the test proxy server. (dshea)- Extract the file used by liveimg as a prereq (dshea)- Convert the proxy script to a prereq. (dshea)- Add a prereqs function to kickstart tests. (dshea)- Fix traceback when trying to create list of unformatted DASDs. (#1268764) (sbueno+anaconda)- network: handle missing connections of a device configured in GUI better (rvykydal)- network: don\'t set NM_CONTROLLED=no for root on SAN. (rvykydal)- Add support for other systemd units to kickstart service command (bcl)- Merge pull request #388 from wgwoods/dd-in-initrd-fix (wwoods)- Set the password checkbox for empty kickstart passwords. (dshea)- Do not set the password input text with unencrypted passwords. (dshea)- Install input checks before modifying the user GUI (#1256065) (dshea)- Fix a lying error message in style_guide.py (dshea)- Use \"Enter\" instead of \"Return\" for the keyboard key. (dshea)- New Anaconda documentation - 24.3 (bcl)- Include missing test files and scripts in Makefile.am/tarball (atodorov)- dracut: accept inst.dd=[file:]/dd.iso (#1268792) (wwoods)- Do not override StorageChecker.errors in StorageSpoke (#1252596) (vtrefny)- Lookup IPv6 address without brackets (#1267872) (bcl)- Mangle the boot device differently for systemd (#1241704) (dshea)- Fail the media check if the systemd service failed to start. (dshea)
* Fri Oct 02 2015 Brian C. Lane - 24.3-1- Properly translate c-to-continue on the root selection screen (mkolman)- Check minimal memory requirements properly (#1267673) (jstodola)- Allow users to be created with an existing GID. (dshea)- Add a test for creating a user with an existing GID. (dshea)- Add tests for gids embmedded in the user groups list. (dshea)- Allow the kickstart --groups list to specify GIDs. (dshea)- Add a --groups argument to the user ks test. (dshea)- Fix the locale pattern packages-instlangs-3 looks for. (dshea)- Raise an error if osimg cannot be found (#1248673) (bcl)- Use the bootloader raid levels for bootloader installation (#1266898) (bcl)- Use otps.display_mode during early startup (#1267140) (mkolman)- Mount stage2 cdrom after running driver-updates (#1266478) (bcl)- Get rid of an unused import in the user spoke. (clumens)- Log crashes from the signal handler. (dshea)- Save a core file when anaconda crashes. (dshea)- Keep environment selection when reentering the software spoke (#1261393) (mkolman)- Only show the user spoke if no users are specified in kickstart (#1253672) (mkolman)- Fix \'cat: /tmp/dd_disk: No such file or directory\' (#1251394) (jkonecny)- Do not display curl 404 errors that can be safely ignored (vtrefny)- Catch blkid failure in driver-updates (#1262963) (bcl)- Add kickstart tests for %packages --instLangs (dshea)- Do not display markup in showDetailedError. (dshea)- Skip OEMDRV if interactive DD is requested (#1254270) (bcl)- Drivers are simply under /run/install/DD-x/ (#1254270) (bcl)- Fix branding when iso is downloaded from nfs or hd (#1252756) (jkonecny)- Use yum to install the mock buildroot for now. (dshea)- Rename the gettext tests (dshea)- Bring back the KSTEST_HTTP_ADDON_REPO substitution in nfs-repo-and-addon.sh (clumens)- Run substitution checks on the right kickstart file. (clumens)- Tell gettext that anaconda is not a GNU package. (dshea)- Ignore environment modification warnings in docs/conf.py (dshea)- Check for unsubstituted strings before running a test. (dshea)- Autopart use 90% of disk capacity for required space compare (#1224048) (jkonecny)- Fix include packages install size when downloading on root (#1224048) (jkonecny)- Enable and improve the check for swap LV size in LVM cache kickstart tests (vpodzime)- make-sphinx-docs: Add modules needed to document tests (bcl)- Add test documentation (atodorov)- Fix how the reqpart test checks for /boot, again. (clumens)- Add a way to get default settings when running the kickstart_tests. (clumens)- Change how we ignore non-tests in kickstart_tests. (clumens)- Various fixes to substitution strings in kickstart_tests. (clumens)- Move kickstart_test .ks files to .ks.in. (clumens)
* Fri Sep 11 2015 Brian C. Lane - 24.2-1- Handle driver rpms retrieved via network (#1257916) (bcl)- Fix the types passed to chown_dir_tree (#1260318) (dshea)- Add a test for home directory reuse (dshea)- Use MDRaidArrayDevice.members instead of .devices (dshea)- Make sure anaconda reads in ks file from OEMDRV device. (#1057271) (sbueno+anaconda)- Try to deal with expected errors from devicetree.populate (#1257648) (vpodzime)- Revert \"Temporarily disable generating a coverage report.\" (clumens)- Fix a DBus InvalidProperty handling (jkonecny)- Fix another bash syntax problem in kickstart-genrules.sh (#1057271) (sbueno+anaconda)- Add a test for the rootpw kickstart command (dshea)- Add tests for setRootPassword (dshea)- Add a /boot partition to the reqpart test. (clumens)- Fix up a statement that\'s not assigned to anything. (clumens)- Temporarily disable generating a coverage report. (clumens)- Don\'t try to concatenate a list with a string (#1252444) (mkolman)- Activate coverage for tests executed with sudo (atodorov)- set sysroot correctly when setting root password (#1260875) (awilliam)- Add a test for kickstarts that %include a URL (dshea)- Add missing python dependencies for requests. (#1259506) (dshea)- Serve the http addon repos from the test tmpdir (dshea)- Make make-addon-pkgs easier to use from within a test (dshea)- Add a simple http server for use in kickstart tests. (dshea)- Add a script to print an IP address for the host. (dshea)- Add a cleanup hook that can be defined by kickstart tests (dshea)- Move kickstart test support files into a separate directory. (dshea)- Fix a python3 related error in the pre-commit hook (dshea)- network: gui spoke TODO cleanup (rvykydal)- libnm in spoke: add missing connection for eth device with Configure (rvykydal)- libnm in spoke: allow adding missing connection for eth device externally (rvykydal)- libnm in spoke: wait for valid state of added device before adding to list (rvykydal)- libnm in spoke: use libmn objects instead of names an uuids (device on/off) (rvykydal)- libnm in spoke: to check if device is activated just use its object (rvykydal)- libnm in spoke: use connnection objects instead of uuids (edit connection) (rvykydal)- libnm in spoke: refresh early when device is added (rvykydal)- libnm in spoke: use connection object instead of uuid (DeviceConfiguration) (rvykydal)- libnm in spoke: share nm client in standalone and normal spoke (rvykydal)- libnm in spoke: add enterprise wpa connection using libnm client (rvykydal)- libnm in spoke: use AccessPoint object in place of ssid bytearray (rvykydal)- libnm in spoke: delete connection using libnm client (rvykydal)- libnm in spoke: replace python-dbus workaround calls for ap security flags (rvykydal)- libnm in spoke: call get_data() on ap.get_ssid() result to get ssid bytes (rvykydal)- libnm in spoke: showing ip configuration of a device (rvykydal)- libnm in spoke: NMClient -> NM.Client (rvykydal)- libnm in spoke: gi.NetworkManager -> gi.NM (rvykydal)- libnm in spoke: Revert \"Fix crash when new device appear in Welcome screen (#1245960)\" (rvykydal)- libnm in spoke: Revert \"Fix crash when connections are changing (#1245960)\" (rvykydal)- Add an ignoredisk --drives= test. (clumens)- Add a test for the reqpart command. (clumens)- Grab anaconda.coverage on tests that reimplement validate(). (clumens)- Install driver-updates (dshea)- Fix a typo in service enablement in kickstart.py. (clumens)- Get rid of the extraneous cats and greps in user.ks. (clumens)- Add sshkey testing to the user kickstart_test. (clumens)- Add a kickstart test in Arabic. (clumens)- Verify Initial Setup services are present before turning them ON/OFF (#1252444) (mkolman)- Don\'t crash if the Japanese PC-98 keyboard is selected (#1190589) (mkolman)- Report on all local files and exclude what we don\'t need instead of explicitly including paths we may not be aware of. (atodorov)- Change \"failed to download\" messages from critical to warning. (clumens)- getcode -> status_code in a live payload error message. (clumens)- Fix a bash error in kickstart-genrules.sh (#1057271) (sbueno+anaconda)- specify if=virtio,cache=none for VM drives (atodorov)- update the test b/c latest anaconda doesn\'t allow weak passwords (atodorov)- Specify format=raw to avoid warning from qemu (atodorov)- update for Python3 nose (atodorov)- Add a services.sh file to match the existing services.ks. (clumens)- Add types to all existing kickstart tests. (clumens)- Add the ability to mark kickstart tests with a type. (clumens)- Run nm-connection-editor with the --keep-above flag (#1231856) (mkolman)
* Mon Aug 31 2015 Brian C. Lane - 24.1-1- Add a test for the user and group creation functions. (dshea)- Get rid of libuser. (#1255066) (dshea)- s/$releasever/rawhide/ (clumens)- LVM on RAID kickstart test (vpodzime)- unbuffered read in python3 only works for binary (bcl)- don\'t crash if no environment set in interactive (#1257036) (awilliam)- network: compare with ssid bytes, not str (rvykydal)- Add dependencies for running the tests/gui tests (atodorov)- Fix first run environment setup in software spoke (#1257036) (jkonecny)- Stop pretending liveinst+rescue is supported (#1256061). (clumens)- Defer to Fedora distro-wide settings for password strength (#1250746) (dshea)- New Anaconda documentation - 24.0 (bcl)- Do a better job reporting failures from kickstart_tests. (clumens)- Preserve coverage results from running the kickstart_tests. (clumens)
* Mon Aug 24 2015 Brian C. Lane - 24.0-1- Remove from the docs repo=hd installation with installable tree (jkonecny)- Fix a race between a window continuing and the next starting (#1004477) (dshea)- Start hubs with the buttons insensitive. (dshea)- Do not replace the standard streams if not necessary. (dshea)- Fix inst.repo=hd: is not working (#1252902) (jkonecny)- Kickstart: Added SELinux test. (kvalek)- Kickstart tests related to SELinux. (kvalek)- Package install and debug message logging. (kvalek)- Don\'t crash if incorrect environment is set in kickstart (#1234890) (mkolman)- Fix I/O issues when anaconda is started without a locale. (dshea)- Move locale environment logic into localization.py (dshea)- network: fix configuring team in kickstart pre (#1254929) (rvykydal)- Merge pull request #311 from atodorov/add_local_coverage (clumens)- Merge pull request #308 from atodorov/rawhide_missing_deps (clumens)- Enable test coverage in CI (atodorov)- Fix the single-spoke TUI message for Python 3. (dshea)- Merge pull request #291 from atodorov/update_coverage_switch (clumens)- Add missing requirements (atodorov)- Add basic kickstart tests for LVM Thin Provisioning (vpodzime)- Use the default mirrorlist instead of fixed repo URL in kickstart tests (vpodzime)- Destroy the keyboard layout dialog when finished (#1254150) (dshea)- Do not encode the geoloc timezone to bytes (#1240812) (dshea)- use inst.debug as alternative option to start coverage (atodorov)
* Mon Aug 17 2015 Brian C. Lane - 23.20-1- Skip source url checks when network is off (#1251130) (bcl)- Don\'t set net.device to link if there is no ksdevice (#1085310) (bcl)- Reading carrier while link is down raises IOError (#1085310) (bcl)- Don\'t write nfs repos to the target system (#1246212) (bcl)- Make sure username entered in TUI if create a user chosen. (#1249660) (sbueno+anaconda)- Write the empty dnf langpacks.conf to the right directory (#1253469) (dshea)- Add pyanaconda test for network.check_ip_address (jkonecny)- Replace IPy package by ipaddress (jkonecny)- Correctly check return code when running rpm from makeupdates (mkolman)- Fix crash when new device appear in Welcome screen (#1245960) (jkonecny)- Fix crash when connections are changing (#1245960) (jkonecny)- Make LVM cache kickstart tests more robust (vpodzime)- product.img buildstamp should override distribution buildstamp (#1240238) (bcl)- On incomplete ks, don\'t automatically proceed with install. (#1034282) (sbueno+anaconda)- Update the translation doc with zanata branching incantations. (sbueno+anaconda)- Merge pull request #287 from kparal/patch-1 (clumens)- boot-options.rst: add a note about nfsiso (kamil.paral)- Few fixes and amendments for the boot_options.rst file (vpodzime)- Prevent issues with encrypted LVs on renamed VGs (#1224045) (vpodzime)- Create and use snapshot of on-disk storage with no modifications (#1166598) (vpodzime)- Implement the class for storage snapshots (vpodzime)- Prevent any changes in the StorageSpoke if just going back (vpodzime)- Make StorageSpoke\'s on_back_clicked less complicated (vpodzime)- Add kickstart tests for the LVM cache kickstart support (vpodzime)- Disable packages-multilib, for now. (clumens)- Make sure the liveimg test shuts down when it finishes. (clumens)- Change how success is checked for the basic-ostree test. (clumens)
* Fri Aug 07 2015 Brian C. Lane - 23.19-1- Add basic support for LVM cache creation in kickstart (vpodzime)- Use labels for the rest of the non-autopart test results. (dshea)- Use a disk label to find the filesystem for escrow results (dshea)- Use someone else\'s code for PID file management. (dshea)- Prevent incomplete translations from making the TUI unusable (#1235617) (mkolman)- Apply the environment substitutions more liberally in nfs-repo-and-addon (dshea)- Use stage2=hd: instead of stage2=live: (dshea)- Add test for liveimg kickstart command (bcl)- Fix pre-install script execution (bcl)- test pre-install kickstart section (bcl)- Use sys.exit() instead of the exit() created by site.py. (dshea)- Call ipmi_report before sys.exit (dshea)- Add a test for proxy authentication (dshea)- Add optional authentication to the proxy server (dshea)- Add more tests to proxy-kickstart (dshea)- Show an alternative prompt if a hub contains only a single spoke (#1199234) (mkolman)- Add few docs and improvement in check_ip_address (jkonecny)- Check whether files actually contain translatable strings. (dshea)- Add specific error string to TUI user dialog (#1248421) (bcl)- Make EditTUIDialog error generic (#1248421) (bcl)- Fix and expand nfs-repo-and-addon.ks (dshea)- Added a script to make the packages used by nfs-repo-and-addon (dshea)- Implement the rest of the repo options in dnfpayload. (dshea)- Fix kickstart test for bond interface creation (jkonecny)
* Fri Jul 31 2015 Brian C. Lane - 23.18-1- Move the proxy server script into a common file. (dshea)- Use python3 for the proxy server and remove python2 compatibility (dshea)- makePickle now needs to return bytes (bcl)- gi.require_version raises ValueError (bcl)- Remove duplicate signal setup block (bcl)- Fix three bugs discovered by driverdisk-disk.ks (clumens)- Fix error with OEMDRV ks auto-load check. (#1057271) (sbueno+anaconda)- Make sure TUI is readable for non-latin languages (#1182562) (mkolman)- Equalize capacity & mount point entries (#1212615) (dshea)- Disable GRUB os_prober on POWER (#1193281) (rmarshall)- Cancel Container Edit Sensitizes Update (#1168656) (rmarshall)- Fix SoftwareSpoke._kickstarted. (dshea)- Disable a Pylint false-positive (#1234896) (mkolman)- Add support for autostep and --autoscreenshot (#1234896) (mkolman)- Escape \\\'s in doc strings (dshea)- Ellipsize the file system type combo box (#1212615) (dshea)- Add graphviz to make-sphinx-doc script (jkonecny)- Remove many of a documentation compilation errors (jkonecny)- Add class diagrams to existing spokes and hubs (jkonecny)- Add class diagram settings to documentation (jkonecny)- Fix the UnusuableConfigurationError dialog (#1246915) (dshea)- Chase pygobject\'s stupid moving target (dshea)- Add missing translation contexts (dshea)- Actually translate the container type labels (dshea)- Check whether a translated string requires a context or comment. (dshea)- Clean up the temporary pools virt-install makes. (clumens)- Return the same object for repeated calls to __get__ (#1245423) (dshea)- Use sys.exit instead of os._exit. (clumens)- Add parentheses around the IPV6 regex fragment. (dshea)- Add tests for IPv6 literals in URLs (dshea)- Modify Installation Source Proxy Label (#11688554) (rmarshall)
* Fri Jul 24 2015 Brian C. Lane - 23.17-1- Fix Initial PPC PReP Boot Selector Name (#1172755) (rmarshall)- Require a newer version of pykickstart (vpodzime)- Use dictionaries is thread-safe manner. (dshea)- Merge pull request #234 from wgwoods/master (wwoods)- Auto-load ks.cfg if OEMDRV volume available. (#1057271) (sbueno+anaconda)- Check the encrypt checkbox when encrypted specified in KS (vtrefny)- Do not raise KickstartValueError for missing passphrase (vtrefny)- Ask for encryption passphrase when not specified in ks (#1213096) (vtrefny)- dracut: minor cleanup (wwoods)- dracut: fix missing messages for inst.ks=cdrom (wwoods)- Wait forever for kickstarts on CDROM (#1168902) (wwoods)- Use abs_builddir instead of builddir so paths will look more reasonable. (clumens)- Add a new makefile target that does everything needed for jenkins. (clumens)- Merge pull request #228 from AdamWill/logind (dshea)- Fix crash when mirrorlist checkbox is checked (jkonecny)- Fix crash when user start typing proxy credentials (jkonecny)- Check repository URL before leaving Source Spoke (jkonecny)- Add IDs to identify addon repositories (jkonecny)- Repositories can be checked without a selection (jkonecny)- Consolidate the language environment variables. (dshea)- Change the generated API indices slightly (dshea)- Ignore \"mountpoint\" used a format specifier (dshea)- filesystems -> file systems, per the style guide (dshea)- Properly parameterize a translated string (dshea)- Fix pylint errors in rescue.py. (dshea)- Remove unused imports (dshea)- Remove text.py from spec file (#965985) (sbueno+anaconda)- Merge pull request #220 from AdamWill/1243962 (dshea)- Fix adding \'boot=\' option in FIPS mode (vtrefny)- anaconda.target: Wants systemd-logind.service (#1222413) (awilliam)- Remove the last usage of newt and get rid of it as a dependency (#965985) (sbueno+anaconda)- Enable anaconda to use the new rescue mode. (#965985) (sbueno+anaconda)- Get rid of unnecessary constants in constants_text. (#965985) (sbueno+anaconda)- Get rid of some unnecessary files. (#965985) (sbueno+anaconda)- Display verbose packaging errors to the user (bcl)- Show source errors from refresh method (bcl)- Fix the validate functions in the btrfs kickstart_tests. (clumens)- Connect kickstart lang data to dnf-langpacks (#1051816) (dshea)- Add simple_replace config file function (bcl)- Remove some vestiges of the old packaging module (dshea)- Remove window boot block detection functions. (dshea)- Remove iutil.xprogressive_delay. (dshea)- Simplify iutil.mkdirChain. (dshea)- Decode wifi SSIDs into strings. (#1240398) (dshea)- Actually use the temp directory so test files get cleaned up (dshea)- Disable the output from rpmbuild (dshea)- Remove stray references to python2. (dshea)- Fix possible to start installation without network (#1221109) (jkonecny)- Fix \'q\' (to quit) do not work in TUI hub (jkonecny)- act on the right objects when stripping URL protocols (#1243962) (awilliam)- Fix \'App\' object has no attribute \'queue\' (#1243316) (jkonecny)
* Thu Jul 16 2015 Brian C. Lane - 23.16-1- fix storage writing for live and ostree installs (#1236937) (awilliam)- Add O_CREAT to the open flags when extracting rpm files. (dshea)- Move ostree gobject version check next to the import (#1243543) (bcl)- Remove rpmfluff from the buildrequires. (dshea)- Only import readline if readline is necessary. (dshea)- use the right baseurl in run_install_test.sh. (clumens)- Don\'t copy the environment when starting metacity. (dshea)- Fix the use of a temporary file in SimpleConfig.write (dshea)- Add a test for SimpleConfig.write(use_tmp=True). (dshea)- Remove an unnecessary chmod when creating chrony.conf (dshea)- Fix some bad uses of chmod. (dshea)- Add a function to open a file with specific permission bits (dshea)- Don\'t ask to start vnc if user specifies text mode. (#1202277) (sbueno+anaconda)- New Anaconda documentation - 23.15 (bcl)- Add a helper for building Sphinx docs using mock. (bcl)- Update Sphinx configuration for python3 (bcl)- Running without a GUI can also raise ValueError in errors.py (bcl)- parse-kickstart_test.py: fix driverdisk_test() (wwoods)- Fix the spelling of \"version\" (dshea)
* Mon Jul 13 2015 Brian C. Lane - 23.15-1- Some dracut modules anaconda needs have been split into their own package. (clumens)- User operation kickstart tests. (kvalek)- Kickstart tests for UTC and LOCAL hwclock. (kvalek)- Kickstart firewall tests. (kvalek)- Fix Repository New_Repository has no mirror or baseurl (#1215963) (jkonecny)
* Fri Jul 10 2015 Brian C. Lane - 23.14-1- Catch blivet formatDevice ValueError in custom (#1240226) (bcl)- There\'s now a python3-rpmfluff, so revert this. (clumens)- Fix a couple other pylint problems in the driver disk tests. (clumens)- Merge pull request #194 from wgwoods/master (wwoods)- dracut: fix boot failure waiting for finished/dd.sh (wwoods)- Use builddir instead of srcdir to find the dd utils (dshea)- Fix the dd_test for python3. (dshea)- Fix %files to deal with compiled python3 modules (dshea)- Add a bunch of gi.require_version calls (dshea)- Temporarily disable the error about not importing rpmfluff. (clumens)- Don\'t try to iterate over threads directly in wait_all. (clumens)- Update the btrfs kickstart tests to use functions.sh. (clumens)- Merge pull request #182 from wgwoods/dd-refactor (wwoods)- driver_updates: fixes from patch review (wwoods)- Don\'t be too picky about what name is --device=link (dshea)- Ignore stderr output from parse-kickstart. (dshea)- Add an option to execReadlines to filter out stderr. (dshea)- Ignore interruptible system calls in the dd test (dshea)- Fix an undefined variable in writeStorageLate (dshea)- Connect zfcp entries to the discovery buttons (dshea)- Connect iscsi activations to buttons (dshea)- Connect the dasd number entry to the discovery buttons. (dshea)- Add keyboard layouts on the row-activated signal. (dshea)- Connect dialog inputs to default actions. (dshea)- Remove unnecessary GtkNotebooks. (dshea)- Re-save some dialog glade files. (dshea)- Merge pull request #181 from wgwoods/master (wwoods)- dd-refactor: dracut + build bits (wwoods)- Add kickstart test for RAID1 (bcl)- pass PYTHONPATH to the kickstart test framework (bcl)- Write servers to chronyd.conf even if it\'s off (#1197575) (wwoods)- Refresh advanced disks after disk summary dialog (#1226354) (bcl)- parse-kickstart: just emit \'inst.dd=XXX\' for driverdisk (wwoods)- parse-kickstart: pylint fixes (wwoods)- dd-refactor: new driver_updates.py + tests (wwoods)- payload: fix driverdisk repos (wwoods)- dracut: fix boot with inst.ks and no inst.{repo,stage2} (#1238987) (wwoods)- Use the most recent versions of the btrfs, logvol, part, and raid commands. (clumens)- Allow /boot partition on iscsi with ibft (#1164195) (jkonecny)- Add kickstart tests to test btrfs installation (vtrefny)- Fix broken test by infiniband patch (#1177032) (jkonecny)
* Thu Jul 02 2015 Brian C. Lane - 23.13-1- Add a switch for the Airplane Mode label (dshea)- Connect labels with keyboard accelerators to a widget (dshea)- Add a test for dangling keyboard accelerators. (dshea)- Use pocketlint for translation and markup checking (dshea)- Flatten the glade test directory. (dshea)- Add support for specifying arbitrary mkfs options. (clumens)- Fix kickstart install with infiniband (#1177032) (jkonecny)- anaconda-dracut: Fix sysroot mount for netroot (#1232411) (bcl)- Add RAID swaps to /etc/fstab (#1234469) (bcl)- network: catch another race when calling dbus methods on invalid devices (rvykydal)- network: GUI, add connection even when virtual device activation failed (#1179276) (rvykydal)- Fix IP / hostname mismatches when showing VNC server address (#1186726) (rvykydal)- Check also ipv6 default routes when looking for onboot=yes device (#1185280) (rvykydal)- Merge pull request #157 from wgwoods/master_dd_fixes (wwoods)- Do not check dependencies on invalid payloads (dshea)- network: don\'t set onboot=False for default autoconnections (#1212009) (rvykydal)- Fix the types used to write anaconda-tb-all.log (dshea)- dd: drop unnecessary archive_read_data_skip (wwoods)- dd_extract: -l should not extract modules+firmware (wwoods)- dd: fix permissions on extracted files (#1222056) (wwoods)- tests: add dd_tests (wwoods)
* Fri Jun 26 2015 Brian C. Lane - 23.12-1- Revert \"Add an optional conditional to progress_report.\" (bcl)- Fix inconsistencies in the payload messages. (dshea)- Fix install-requires and install-buildrequires (dshea)- anaconda-dracut: Mount /dev/mapper/live-rw (#1232411) (bcl)- Eliminate some false test results when running glade tests. (atodorov)- Move the knowledge about network packages into ksdata.network. (clumens)- Add an optional conditional to progress_report. (clumens)- Move the big block of late storage writing out of install.py. (clumens)- The attribute is named ostreesetup.nogpg. (clumens)- Use the index in grubenv (#1209678) (bcl)- Do not raise an exception on EINTR from os.close or os.dup2 (dshea)- Merge pull request #154 from mulkieran/master-959701 (mulkieran)- Improve focus behavior in the advanced user dialog (dshea)- Re-save advanced_user.glade (dshea)- Depsolve kickstarted packages on the summary hub (#961280) (dshea)- Add a kickstart test for %packages --ignoremissing (dshea)- Remove descriptions for RAID levels (#959701) (amulhern)- No kexec-tools on aarch64 (bcl)
* Fri Jun 19 2015 Brian C. Lane - 23.11-1- Do not import iutil from flags (dshea)- Ignore EINTR errors in files unlikely to encounter them (dshea)- Reimplement the open override for the dracut scripts (dshea)- Wrap the only non-open call found by the new pocketlint checks (dshea)- Redefine open to retry on EINTR (dshea)- Remove __future__ imports (dshea)- Use python 3\'s OSError subclasses instead of checking errno (dshea)- Allow kwargs in eintr_retry_call (dshea)- Remove explicit uses of /dev/null (dshea)- Do not retry calls to close or dup2 (dshea)- Remove another function from isys (dshea)- Make dialogs behave better with timed input validation (dshea)- Fix the password/confirm checks to work with delayed validation (dshea)- Move the URL protocol removal out of the input check (dshea)- Remove the vestigal capslock label from the password spoke (dshea)- Re-saved a few glade files (dshea)- Run set_status unconditionally from update_check_status (dshea)- Do not run input checks for every keystroke of input (#1206307) (dshea)- Add a method to execute timed actions early (dshea)- Use comps.environments instead of comps.environments_iter (#1221736) (dshea)- Merge pull request #83 from mulkieran/master-requires (mulkieran)- Only show supported autopart choices in choices combo. (amulhern)- Strip out device types that blivet is not able to support. (amulhern)- Update blivet required version. (amulhern)- Fix nfs4 stage2 and repo handling (#1230329) (bcl)- Update upd-kernel so that it actually works (#1166535) (bcl)- Fix passing ,nfsvers=3 to dracut (#1161820) (bcl)- Require the python3 version of iscsi-initiator-utils (dshea)- Fix the pylint pre-commit hook for python3 and pocketlint (dshea)- Fix a type check to work with python 3. (dshea)- Do not log Xorg output to tty5 (dshea)
* Wed Jun 10 2015 Brian C. Lane - 23.10-1- Deal with encrypted partitions not being readable by virt-cat. (clumens)- Make use of the restore_signals Popen argument (dshea)- Don\'t allow /boot on iSCSI. (#1164195) (sbueno+anaconda)- Merge pull request #127 from mulkieran/master-kickstart (mulkieran)- Actually distribute the clickable message test, too (dshea)- Fix disk argument passing to virt-cat in the ostree test. (clumens)- Relabel all password and group files in %post (#1228489) (dshea)- Deal with the order of ifcfg files not being guaranteed. (clumens)- Add a __init__.py to fix up an error when running iutil_test.py. (clumens)- Actually run the clickable message test (dshea)- Add a false positive to pylint checking for S390Error. (clumens)- Let the excludedocs test pass if there are only directories left. (clumens)- Allow successful kstest results to provide more details. (clumens)- The escrow_cert test cannot use autopart. (clumens)- Don\'t warn on PyInit__isys being unused. (clumens)- Test that root LV is encrypted. (amulhern)- Deal with subprocess returning bytes in tests/lib/filelist.py, too. (clumens)- Make anaconda+python3+pocketlint work. (clumens)- Start using our new shared pylint framework in anaconda. (clumens)- Remove our extra pylint checkers. (clumens)- Remove a duplicate libselinux-python3 requires. (clumens)- Run makeupdates with Python 2 for now (mkolman)- Don\'t use the _safechars private property (#1014220) (mkolman)- Make sure directory size is returned as int (#1014220) (mkolman)- Only warn about missing yum-utils (#1014220) (mkolman)- Make sure set_system_time() gets an integer (#1014220) (mkolman)- Make sure the column number in TUI is an integer (#1141242) (mkolman)- Python 3 compatible sorting fixes (#1014220) (mkolman)- Make version comparison Python 3 compatible (#1014220) (mkolman)- Don\'t apply numeric comparison on None (#1141242) (mkolman)- Avoid comparing None to an integer (#1141242) (mkolman)- Handle urllib split (#1014220) (mkolman)- Don\'t try to decode strings (#1014220) (mkolman)- Rename function attributes (#1014220) (mkolman)- Replace raw_input() with input() (#1014220) (mkolman)- Make iterators and their usage Python 3 compatible (#1014220) (mkolman)- Convert Python 2 metaclass magic to Python 3 metaclass magic (#1014220) (mkolman)- Make the raise syntax Python 3 compatible (#1014220) (mkolman)- Python 3 no longer does tuple parameter unpacking (#1014220) (mkolman)- Make isys Python 3 compatible (#1014220) (mkolman)- Set a correct mode for the tempfile (#1014220) (mkolman)- Python 3 temp files no longer reflect external changes (#1014220) (mkolman)- Make print usage Python 3 compatible (#1014220) (mkolman)- Rename the warnings spoke to warnings_spoke (#1014220) (mkolman)- Replace list comprehension with for at class level (mkolman)- Make gettext usage Python 3 compatible (#1014220) (mkolman)- Do not open tty5 for writing in the \"a\" mode (#1014220) (vpodzime)- Do not use pykickstart\'s RepoData as a key in a dict (#1014220) (vpodzime)- Do not run repo attrs\' checks if they are not set up yet (#1014220) (vpodzime)- Don\'t depend on side effects of map() (#1141242) (mkolman)- Don\'t use exceptions\' message attribute (#1014220) (vpodzime)- Addapt to string type changes (#1014220) (mkolman)- Handle modules returning bytes in Python 3 (#1014220) (mkolman)- Add and use function that makes sure we work with strings (#1014220) (vpodzime)- Handle modules requiring different string types in Python 3 (#1014220) (mkolman)- Remove sitecustomize (#1014220) (mkolman)- Make ASCII conversions Python compatible (#1014220) (mkolman)- Remove \"is Unicode\" tests (#1014220) (mkolman)- Fix ASCII conversion tests (#1014220) (mkolman)- Return a string when calling a program (#1014220) (mkolman)- Handle subprocess returning bytes (#1014220) (mkolman)- Handle latin-1 strings in locale -a output (#1014220) (mkolman)- Open the VNC password file for binary writing (#1014220) (mkolman)- Update parse-kickstart for python3 (#1014220) (bcl)- Update driver-updates for python3 (#1014220) (bcl)- Update python-deps for python3 (#1014220) (bcl)- Add a test for parse-kickstart (#1014220) (bcl)- Make the import Python 3 compatible (#1014220) (mkolman)- Change configparser and queue imports (#1014220) (mkolman)- Remove imports from the __future__ (#1014220) (mkolman)- Use the imp module directly (#1014220) (mkolman)- Use Python 3 versions of Python dependencies (#1014220) (mkolman)- Use /usr/bin/python3 in scripts (#1014220) (mkolman)- Use Python 3 versions of nose and Pylint (#1014220) (mkolman)- Build the Anaconda widgets for Python 3 (#1014220) (mkolman)- Update makebumpver for python3 (#1014220) (bcl)- Fix Kickstart installation without default gateway errors out (jkonecny)- Fix results checking in a couple ks tests. (clumens)
* Wed Jun 03 2015 Brian C. Lane - 23.9-1- Fix a usage typo in run_once_ks script. (sbueno+anaconda)- Add kickstart tests for keyboard settings. (sbueno+anaconda)- Add a kickstart test for lang settings. (sbueno+anaconda)- Fix a % call inside _(). (clumens)- Convert ntp-pools.
* to using the new kstest functions and autopart. (clumens)- Fix up the expected output in parse-kickstart_test.py. (clumens)- Fix a couple more pylint problems in the s390 code. (clumens)- Use the adapted Timezone class for kickstart data (vpodzime)- Add a kickstart test for processing NTP servers/pools configuration (vpodzime)- Show error on invalid username attempts in TUI. (#1171778) (sbueno+anaconda)- Fix dracut reads ksdevice from missing os enviromnent (jkonecny)- Run kickstart tests through an LMC-like program, not LMC itself. (clumens)- Move common kickstart_test code out into its own functions.sh file. (clumens)- Switch to using autopart in the kickstart tests. (clumens)- Fix a couple pylint errors. (sbueno+anaconda)- Make anaconda changes necessary for libblockdev s390 plugin. (sbueno+anaconda)- Add a kickstart test for lvm with percentage-based sizes. (dlehman)- Add kickstart test for basic fixed-size lvm layout. (dlehman)- Add a kickstart test to validate the default fstype. (dlehman)- Add kickstart test to test bond interface creation (jkonecny)- Add kickstart test to test vlan creation (jkonecny)- Fix --device=link and --device not specified (#1085310) (rvykydal)- Add kickstart test to test hostname (jkonecny)- Add a /boot to tmpfs-fixed_size.ks. (clumens)- Fix bad warning message when user set illegal IP (jkonecny)- Fix bad check of illegal ip address (jkonecny)- Add a simple tmpfs kickstart test (mkolman)- Add a kickstart test for escrow packets and backup passphrases (dshea)- Fix a typo that caused us to discard corrected target sizes. (#1211746) (dlehman)- Don\'t pass anything to ./configure. (dshea)- Fix a pylint problem in parse-kickstart_test.py. (clumens)- Fix 0 choice in Language and Storage in TUI mode (jkonecny)- Update html documentation for new boot-options section (bcl)- Convert boot-options to ReST and include it in the Sphinx documents. (bcl)
* Fri May 15 2015 Brian C. Lane - 23.8-1- Clean up after processKickstart in parse-kickstart_test.py. (clumens)- Add support to dnfpayload.py for addon NFS repos. (clumens)- Fix IndexError: list index out of range (#1219004) (jkonecny)- Fix a typo in proxy-kickstart.sh that was causing a test time out. (clumens)- iSCSI Name Validation using regexes (sujith_pandel)- Add kickstart tests for proxy usage. (dshea)- In dracut, do not display a warning for network lines with just a hostname. (clumens)- Add transport adapters to support ftp and file fetching (dshea)- Fix for \"Kickstart installation fails...\" (#1197960) (jkonecny)- Allow passing kickstart tests to be run on the command line. (clumens)- Automatically collect environment variables to be passed to ks tests. (clumens)- Use isinstance instead of type for doing type checks. (clumens)- Remove yumpayload.py, its support files, and most references to yum. (clumens)- Fix the packages-and-group wildcard exclusion test (dshea)- Set the GUI-selected environment in the ksdata (#1192100) (dshea)- Don\'t crash if the disk model is None (#1215251) (dshea)- Correct an error message in packages-and-groups-1.ks. (clumens)- Switch from testing for emacs
* to kacst
*. (clumens)- Tests that end in a traceback are failures, not successes. (clumens)- Don\'t run run_report.sh from within run_kickstart_tests.sh. (clumens)- If a kickstart test failed due to a traceback, display that. (clumens)- Wrap device labels earlier (#1212586) (dshea)- Remove the angle property from the device label (dshea)- Get rid of the find button in the filter spoke. (dshea)- Rearrange filter.glade (dshea)- Fix errors in the vendor column renderers. (dshea)- Fix some minor inconsistencies in filter.glade (dshea)- Fix issues with advanced storage searching. (dshea)- Remove duplicate entries from search combo boxes (dshea)- Use named IDs for the filter type combo boxes. (dshea)- Rearrange filter.glade the way glade wants it now (dshea)- Add a reporting support script to kickstart tests. (clumens)- Return a specific error code when a test times out. (clumens)- Fix indentation in run_one_ks.sh. (clumens)- Also remove all the fonts in the packages-and-groups-1 test. (clumens)- Enable the basic-ftp and basic-ftp-yum kickstart tests. (clumens)- Fix a typo in groups-and-envs-2.ks (clumens)- Get NTP pools and servers from ksdata for the runtime config (vpodzime)- Adapt to the new argument list for save_servers_to_config. (clumens)- Remove the restriction that /boot be below 2TB for grub (#1082331) (dshea)- Distinguish between NTP pools and servers in GUI (vpodzime)- Add support for chrony pool directive (mlichvar)- Add a readme pointing to the documentation (bcl)- Sphinx docs - use source order (bcl)- Add html documentation for Anaconda v23.7 (bcl)- Place html docs under ./docs/html/ (bcl)- Configure proxy settings for dnf payload (#1211122) (bcl)- Change online action to change (bcl)- Check for images/install.img first for netboot (bcl)- Ignore addon and anaconda sections in handle-sshpw (bcl)- Ignore %anaconda section in parse-kickstart (bcl)- Change of label in iscsi storage spoke (jkonecny)
* Wed Apr 22 2015 Brian C. Lane - 23.7-1- Fix doReqPartition import from autopart (bcl)- Add support for reboot --kexec kickstart command (bcl)- Add inst.kexec and --kexec support to reboot with kexec (bcl)- Add setup_kexec method to prepare the system for a reboot with kexec (bcl)- Add kickstart %pre-install section support (bcl)- Remove the custom help button from the toolbar (bcl)- Use multiple streams for zRAM instead of multiple devices (vpodzime)- iscsi: pass rd.
* options of devices to be mouted in dracut (#1192398) (rvykydal)- Remove the unused productName import from custom_storage_helpers.py. (clumens)- Remove the old custom partitioning help dialog (mkolman)- Implement the new reqpart command. (clumens)- Sort disks by name when checking disk selection (vpodzime)- Set both .format\'s and .originalFormat\'s passphrase on unlock (vpodzime)- Make the Encrypt checkbox insensitive for encrypted non-BTRFS devices (#1210254) (vpodzime)- Check for Gtk before importing escape_markup (bcl)- If the network is disabled, also disable the network part of the source spoke. (#1192104) (clumens)- Add handling for unusable storage configurations. (dlehman)- Allow markup in the label/message of DetailedErrorDialog. (dlehman)- Allow passing an optional button list to showDetailedError. (dlehman)- Allow kwargs with gtk_action_wait, gtk_action_nowait decorators. (dlehman)- Fix makeupdates handling of Release: (bcl)- Make sure we unmount the path we mounted (bcl)- Fix up one more back_clicked reference that got missed. (clumens)- Don\'t unconditionally set ksdata.lang.seen to True (#1209927) (mkolman)- Reset the back_clicked flag if we stay on the Storage spoke (#1210003) (vpodzime)- Mark the back_clicked attribute of the Storage spoke as private (vpodzime)- TUI pwpolicy setup was supposed to be in __init__ not refresh (#1208607) (bcl)- Preserve the order of boot args added by kickstart. (clumens)- Revert \"allow /boot on btrfs subvol or filesystem\" (bcl)- Connect scroll adjustments in the right class (#1206472) (dshea)
* Thu Apr 02 2015 Brian C. Lane - 23.6-1- Enforce sane disk selections. (dlehman)- Add a test for parse-kickstart (bcl)- Add --tmpdir to parse-kickstart for testing (bcl)- Use the correct format for IPMI messages. (clumens)- Do not use min_luks_entropy with pre-existing devices (#1206101) (dshea)- Remove the dnf cache directory when resetting the repo (dshea)- Do not add separators to the addon list when not needed (dshea)- Only use the instclass environment if it actually exists. (dshea)
* Fri Mar 27 2015 Brian C. Lane - 23.5-1- Mock external module dependencies for readthedocs (bcl)- Generate the pyanaconda module documentation (bcl)- Reformat kickstart.rst using better ReST markup (bcl)- Add some deprecation-related false positives. (clumens)- Add Sphinx documentation support (bcl)- Add documentation on %anaconda kickstart command (bcl)- Prevent Storage spoke Done button method from multiple launch (jkonecny)- Prevent spokes from being exited more times. (jkonecny)- Only depend on pygobject3-base in anaconda-core (#1204469) (mkolman)- Use proxy when configured for the base repo (#1196953) (sjenning)- Assume UTC if setting the system time without a timezone (#1200444) (dshea)- Add boolean as return to ThreadManager.wait (jkonecny)- Make sure LANG is always set to something (#1201896) (dshea)- Fix pylint/translation issues from the pwpolicy patches. (clumens)
* Fri Mar 20 2015 Brian C. Lane - 23.4-1- Clean out the mock chroot before attempting to run the rest of the test. (clumens)- Implement %anaconda kickstart section for pwpolicy (bcl)- Add pwpolicy support to TUI interface (bcl)- Add pwpolicy for the LUKS passphrase dialog. (bcl)- Add pwpolicy for the user spoke. (bcl)- Use pwpolicy for the root password spoke. (bcl)- Add the text for weak passwords to constants (bcl)- Add tests with an FTP instrepo (dshea)- Add kickstart tests for an NFS instrepo and addon repos. (dshea)- Handle /boot on btrfs for live (#1200539) (bcl)- rpmostreepayload: write storage config after shared var is mounted (#1203234) (rvykydal)- Tweak tmux configuration file (jkonecny)- Remove --device= from the new kickstart tests. (clumens)- Add more kickstart-based packaging tests. (clumens)- Fix enlightbox call in ZFCPDialog. (#1151144) (sbueno+anaconda)- fix crash with bare \'inst.virtiolog\' in boot args (wwoods)- Do not attempt to set None as a warning (dshea)- fix inst.ks.sendmac for static ip=XXX (#826657) (wwoods)
* Fri Mar 13 2015 Brian C. Lane - 23.3-1- Only insert strings into the environment (#1201411) (dshea)- Fix the rescue kernel version list in writeBootLoader (#1201429) (dshea)- Missing local variable check (omerusta)- Fix the handling of nfs:// URLs. (dshea)- Add glob support for the -a/--add option in makeupdates (mkolman)- White Space fixes (omerusta)- Put all mock results into the top-level source dir. (clumens)- Merge pull request #31 from dcantrell/master (david.l.cantrell)- Require newt-python in anaconda-core (dshea)- Make merge-pr executable (dshea)- Display an error for exceptions during GUI setup (dshea)- Remove unused invisible char properties (dshea)- Add a check for invisible_char validity (dshea)- Connect viewport adjustments to child focus adjustments (#1192155) (dshea)- Support \'%packages --multilib\' in dnfpayload.py (#1192628) (dcantrell)
* Fri Mar 06 2015 Brian C. Lane - 23.2-1- Add rc-release target (bcl)- Change --skip-tx to --skip-zanata in scratch-bumpver (bcl)- Add --newrelease to makebumpver (bcl)- Improve the addon repo name collision code (#1125322) (bcl)- Fix the import of mountExistingSystem (vpodzime)- Fix import error in anaconda-cleanup. (sbueno+anaconda)- Use the new static method to get possible PE sizes (vpodzime)- Try using the global LUKS passphrase if none is given for LV/part (#1196112) (vpodzime)- Fix the help button mnemonic display on spokes (dshea)- Only set the hub message if the message has changed (dshea)- Wrap the info bar in a GtkRevealer (dshea)- Add links to clickable warning and error messages. (dshea)- Add a test to look for clickable messages that aren\'t clickable enough. (dshea)- Increment the widgets version number (dshea)- Allow markup and links in the info bar. (dshea)- Add more links to gtk-doc comments (dshea)- Handle New_Repository name collision source spoke (#1125322) (bcl)- Fix a bad usage of execWithRedirect (#1197290) (dshea)- Have to be root to delete /var/tmp/kstest-
* on the remote machines. (clumens)- Use the LUKS device for swap in fstab (#1196200) (vpodzime)- Clear TUI source spoke errors that may have been leftover from a prior attempt. (#1192259) (sbueno+anaconda)
* Fri Feb 27 2015 Brian C. Lane - 23.1-1- Make sure python2 dnf is required (bcl)- Fix pykickstart requirement. (clumens)- Extract xattrs from tar payload (#1195462) (bcl)- Add a script to rebase and merge pull requests (dshea)- Update translation documentation for Zanata (bcl)- Switch translation support to fedora.zanata.org (bcl)- install.py: fix the \'is team device\' check (awilliam)- Explain why Anaconda requires rpm-devel and libarchive-devel during build (mkolman)- Revert \"Switch to temporary transifex branch\" (bcl)- Revert \"makebumpver needs to know about anaconda-1 transifex name\" (bcl)- Commit 23.0 anaconda.pot file (bcl)- Rename queue.py to queuefactory.py. (clumens)- Remove references to old_tests, which no longer exists. (clumens)- Fix package and group removing with the dnf payload. (clumens)- Don\'t try to run new-kernel-pkg if it doesn\'t exist. (clumens)
* Fri Feb 20 2015 Brian C. Lane - 23.0-1- Remove unused imports (dshea)- Check for unused imports in __init__ files (dshea)- Remove timestamp-based version support. (dshea)- Add test lib methods to check regexes (dshea)- Cleanup BuildRequires (mkolman)- Remove obsolete imports. (amulhern)- Make print statement print output w/out surrounding parentheses. (amulhern)- Remove an unused import (dshea)- rpmostreepayload: Honor noverifyssl (walters)- typo: packaging: Don\'t vary name of \"verified\" (walters)- Disable the metacity mouse-button-modifier setting (dshea)- Fix completion setting in TUI language spoke. (#1192230) (sbueno+anaconda)- Remove the pylint false positives for the GLib module (dshea)- Use ExtendAction for --ignore flag (amulhern)- Use a simple ExtendAction for add_rpms option. (amulhern)- Fix log message formating (mkolman)- Don\'t clear nonexistent DNF package download location (#1193121) (mkolman)