Changelog for yast2-network-4.2.91-lp152.2.27.1.noarch.rpm :

* Tue Feb 16 2021 Knut Anderssen - Improve the AutoYaST interfaces reader handling better the IP Addresses configuration. (bsc#1174353, bsc#1178107)- 4.2.91
* Fri Jan 22 2021 Knut Anderssen - Suggest to modify the VLAN interface name when the VLAN ID is modified (bsc#1174363)- 4.2.90
* Mon Jan 11 2021 Knut Anderssen - Fix network configuration progress bar steps (bsc#1180702)- 4.2.89
* Tue Dec 15 2020 Knut Anderssen - Fix prefix length assignation when the alias netmask uses dot notation (bsc#1174766).- 4.2.88
* Thu Dec 10 2020 Knut Anderssen - Fix bonding slaves sorting (bsc#1178950)- 4.2.87
* Wed Dec 09 2020 Knut Anderssen - Clean the ifcfg file cached data before the connection configuration changes are written (bsc#1178950)- 4.2.86
* Mon Nov 23 2020 Knut Anderssen - Do not show a warn message when modifying a bonding configuration and all the slaves are already configured with BOOTPROTO=\'none\' (bsc#1178950)- 4.2.85
* Fri Nov 20 2020 Knut Anderssen - Fixed detection of connection configuration changes (bsc#1178950)- 4.2.84
* Tue Oct 13 2020 Michal Filka - bnc#1175360 - more robust AY profile parser. Do not crash with internal error on unknown node in interfaces section - support for static configurations without ip address- bnc#1175206 - support for defined default when missing bootproto in AY- 4.2.83
* Wed Oct 07 2020 Knut Anderssen - Write hostname changes when modified through the \'dns\' client (bsc#1177191).- 4.2.82
* Mon Oct 05 2020 Knut Anderssen - Do not crash when there are more than one parsing hostnames obtained by wicked through DHCP (bsc#1173915)- 4.2.81
* Mon Sep 28 2020 Knut Anderssen - Write the virtualization network configuration properly during an autoinstallation (bsc#1177025)- 4.2.80
* Thu Sep 24 2020 Knut Anderssen - Fixed initialization of the bridge STP configuration (bsc#1176820)- 4.2.79
* Mon Sep 21 2020 Knut Anderssen - Fix connection hostname initialization (bsc#1175579)- 4.2.78
* Tue Sep 15 2020 Knut Anderssen - Infer the vlan_id from the interface file name when the attribute is not declared explicitly (bsc#1176575)- 4.2.77
* Thu Sep 10 2020 Knut Anderssen - When proposing the virtualization network configuration, force a read of the current configuration in case that it is not present (bsc#1176313)- 4.2.76
* Tue Jul 28 2020 Knut Anderssen - Do not crash when configuring an IPv6 route through AutoYaST (bsc#1174353)- 4.2.75
* Thu Jul 16 2020 Knut Anderssen - Permit to write networking config changes without touching the service and other components like the firewall (bsc#1173298)- 4.2.74
* Tue Jul 14 2020 Knut Anderssen - Permit dot characters in the hostname allowing to specify it as a FQDN (bsc#1173298)- 4.2.73
* Tue Jun 30 2020 Knut Anderssen - Do not remove automatically aliases from /etc/hosts during an autoinstallation (bsc#1173213)- 4.2.72
* Fri Jun 19 2020 Knut Anderssen - Parse correctly udev rules keys using underscores (bsc#1167256)- 4.2.71
* Mon Jun 15 2020 Imobach Gonzalez Sosa - Do not export interfaces section when there are no aliases to export (bsc#1172922).- 4.2.70
* Thu Jun 11 2020 Knut Anderssen - Try to install the wireless-tools package when the package is not installed and the wifi networks are scanned (bsc#1168479)- 4.2.69
* Wed Jun 10 2020 José Iván López González - Avoid error when accessing to Bond Slaves in s390 (bsc#1172444).- 4.2.68
* Mon Jun 08 2020 Knut Anderssen - AutoYaST: Udev rules are written or copied to the target system properly when defined in the profile (bsc#1169663).- AutoYaST: Fixed the copy or merge of the linuxrc interfaces configuration when the installation network configuration is selected to be kept.- 4.2.67
* Thu Apr 16 2020 Knut Anderssen - Do not try to install kernel packages anymore since ISDN support was already dropped which was the most common use case. Removed also hardware methods used mainly for ISDN config. (bsc#1151187)- 4.2.66
* Thu Apr 02 2020 Imobach Gonzalez Sosa - AutoYaST: Do not try to activate network devices that are already active in S390 systems (bsc#1163149). Related to jsc#SLE-7396.- AutoYaST: Allow to use spaces or colons to separate channel IDs in the \"chanids\" element.- 4.2.65
* Fri Mar 27 2020 Knut Anderssen - Refresh the current system cached network configuration with the one written avoiding inconsistencies during installation (bsc#1162987)- 4.2.64
* Thu Mar 19 2020 Knut Anderssen - AutoYaST: do not crash when defined dns section whitout hostname (bsc#1166953)- AutoYaST: handle the dhcp_hostname option in the dns section correctly- 4.2.63
* Wed Mar 18 2020 Knut Anderssen - Do a reload of configured interfaces when writing the configuration during a ssh or vnc installation (bsc#1166287)- 4.2.62
* Tue Mar 10 2020 Josef Reidinger - Store ip forwarding set during installation to target system (bsc#1159295)- 4.2.61
* Mon Mar 02 2020 Michal Filka - bsc#1164506 - fixed setting hostname in installer- bsc#1164587 - fixed setting hostname according to AY profile- 4.2.60
* Mon Mar 02 2020 Knut Anderssen - Do not modify interface name when enslaving it (bsc#1165463)- 4.2.59
* Thu Feb 27 2020 Knut Anderssen - Do not crash when running the network configuration client if the config has not been read by a previous client (bsc#1101514)- 4.2.58
* Tue Feb 25 2020 schubiAATTsuse.de- Using SysctlConfig class: Handle sysctl entries in different directories (bsc#1151649).- 4.2.57
* Fri Feb 21 2020 Knut Anderssen - Do not crash when checking if a given \'host\' is local or not (bsc#1163305)- 4.2.56
* Wed Feb 19 2020 Imobach Gonzalez Sosa - Add a class to represent NTP servers (jsc#SLE-7188).- 4.2.55
* Wed Feb 19 2020 Knut Anderssen - Do not crash with an exception when editing the hardware configuration of a new unplugged connection (bsc#1162679)
* Fri Feb 07 2020 Michal Filka - bsc#1162271 - fixed validation of hostname- 4.2.54
* Fri Feb 07 2020 Knut Anderssen - Fix the installation proposal text reflecting the network configuration changes (bsc#1162796)- 4.2.53
* Thu Feb 06 2020 Knut Anderssen - Prevent assignation of values not defined in the AutoYaST profile when reading the interfaces section (bsc#1162671)- 4.2.52
* Tue Feb 04 2020 Knut Anderssen - Do not break when reading interface config files with trailing spaces (bsc#1161300)- 4.2.51
* Mon Feb 03 2020 Knut Anderssen - Fix connection configuration summary when using a remote IP address (bsc#1162483)- 4.2.50
* Fri Jan 31 2020 Knut Anderssen - Do not fail when listing the s390 group devices of a given type and no one is present (bsc#1160997)- 4.2.49
* Thu Jan 30 2020 Knut Anderssen - Bring back the s390 group device activation dialog when editing an offline s390 group device (bsc#1160997)- 4.2.48
* Thu Jan 23 2020 Imobach Gonzalez Sosa - Do not try to read an ifcfg-
* file that does not exist (bsc#1161234).
* Wed Jan 22 2020 Ancor Gonzalez Sosa - Do not crash if install.inf contains an IP address that cannot be resolved to a name (bsc#1161217)- 4.2.47
* Tue Jan 21 2020 Knut Anderssen - bsc#1156986 - Fix crash when logging that an interface is not connected or is not bridgeable when proposing the virtualization config.- 4.2.46
* Wed Jan 15 2020 Knut Anderssen - bsc#1158025 - When touching existent udev rules, modify only the parts that are relevant or have changed. - When the hardware is read, use the parent_bus_id as the busid for virtio netcards.- 4.2.45
* Wed Jan 15 2020 Knut Anderssen - bsc#1156106 - Fixed the initialization of DNS.dhcp_hostname by the inst_setup_dhcp client- 4.2.44
* Mon Jan 06 2020 Martin Vidner - Add a sanity test for CLI error code reporting (bsc#1144351)- 4.2.43
* Fri Jan 03 2020 Michal Filka - bnc#1159970 - suppport for reading / writing MTU- 4.2.42
* Thu Jan 02 2020 Michal Filka - bnc#1153198, fate#319639 - fixed internal error caused by incompatibility between new and old DNS / Hostname handling code.- 4.2.41
* Fri Dec 27 2019 Josef Reidinger - read properly old wireless auth modes and use new ones instead (bsc#1159160)- 4.2.40
* Mon Dec 23 2019 Michal Filka - bnc#1153198, fate#319639 - improved previous fix - exception handling- 4.2.39
* Tue Dec 17 2019 Knut Andersse - bsc#1156986 - Fixed the creation of network configuration for virtualization- 4.2.38
* Tue Dec 17 2019 Michal Filka - bnc#1153198, fate#319639 improved previous fix together with some cleanup- 4.2.37
* Mon Dec 16 2019 Knut Anderssen - Centered and added title to the add interface dialog (jsc#SLE-7753)- 4.2.36
* Wed Dec 04 2019 Michal Filka - bnc#1158122 - fixed internal error when incorrectly querying for hostname in AY\'s second stage- 4.2.35
* Tue Nov 26 2019 Knut Anderssen - Drop support for obsolete network device types (jsc#SLE-7753)- 4.2.34
* Mon Nov 25 2019 Knut Anderssen - Fix wireless mode and auth_mode initialization (bsc#1157394)- 4.2.33
* Mon Nov 25 2019 Knut Anderssen - Added a special type for the \"Unknown\" interfaces omitting them from the interfaces list (bsc#1156285)- 4.2.32
* Mon Nov 25 2019 Knut Anderssen - Ignores invalid udev rules parts (bsc#1157361)- 4.2.31
* Thu Nov 21 2019 Knut Alejandro Anderssen González - Firsboot dhcp: Ensure the network configuration has been read before trying to configure it by dhcp (bsc#1157429)- 4.2.30
* Thu Nov 21 2019 Michal Filka - bnc#1153198, fate#319639 - implemented proper hostname setup in installation for the new backend- 4.2.29
* Tue Nov 19 2019 David Diaz - Do not crash when wrapping text (bsc#1157161)- 4.2.28
* Tue Nov 12 2019 Josef Reidinger - fix importing dhclient_set_hostname key from autoyast profile (bsc#1152021)- 4.2.27
* Sun Nov 10 2019 Knut Anderssen - Wireless: Fix wpa auth modes selection removing the prefix from the combobox value which is not used when writing the config. (bsc#1155639)- 4.2.26
* Fri Nov 08 2019 Knut Anderssen - Live installation: - Do not try to configure dhcp when NetworkManager is in use. - Show the general tab in the lan client allowing to switch between backends when systemd is running. - Do not do a netconfig update during an installation for not breaking the current resolv configuration.- 4.2.25
* Fri Nov 01 2019 Josef Reidinger - fix typo in remote desktop file (thanks for contribution to Markus S aka kamikazow) (bsc#1155584)- 4.2.24
* Tue Oct 15 2019 Josef Reidinger - Fix crash caused by type in widget method (caused in 4.2.22 by rubocop done as side-effect of bsc#1153673 fix)- 4.2.23
* Mon Oct 14 2019 Knut Anderssen - bsc#1153673 - Fix Yast::Logger dependency in bridge connection config.- 4.2.22
* Wed Oct 09 2019 Josef Reidinger - Update reference in VLAN, Bridge or Bond when its device is removed or renamed (bsc#1153460)- 4.2.21
* Mon Oct 07 2019 Imobach Gonzalez Sosa - Place sysctl settings in /etc/sysctl.d/ (jsc#SLE-9077).- 4.2.20
* Mon Oct 07 2019 Knut Anderssen - AutoYaST: Added back the activation of s390 devices during the first stage as it was removed when switched to the new data model
* Fri Oct 04 2019 Josef Reidinger - Fix CLI tests for network (bsc#957537)- 4.2.19
* Thu Oct 03 2019 Josef Reidinger - Fix blink positioning in UI (bsc#1119407)- 4.2.18
* Wed Oct 02 2019 Knut Anderssen - bsc#1152840 - Fix interface ipaddr and prefixlen in the cloned profile.- 4.2.17
* Wed Oct 02 2019 Josef Reidinger - Adapt network CLI to new data model with improved error reporting (bsc#1151242)- 4.2.16
* Wed Oct 02 2019 Imobach Gonzalez Sosa - boo#1152748: - Fix detection of the network status during installation.- 4.1.15
* Tue Oct 01 2019 Knut Anderssen - AY: Fix interface name check for using the fallback when not set.
* Tue Oct 01 2019 Imobach Gonzalez Sosa - boo#1152627 - Fix circular dependency between DNS and Host modules - Remove unneeded code related to the already dropped feature to write the hostname to /etc/hosts.- 4.2.14
* Fri Sep 20 2019 Imobach Gonzalez Sosa - bsc#1151491 - Completed the new data model (support for TUN/TAP, bridges, bonding, VLANs, etc.). - Switched to use the new data model. - New wireless configuration workflow. - Revamped support for interfaces renaming and drivers assignment, including better udev rules handling. - Fixed /etc/hosts handling when switching from static to DHCP based configuration. - Many small fixes in different areas.- 4.2.13
* Tue Sep 10 2019 Michal Filka - bnc#1149234 - apply udev rule from AY profile according to device\'s mac value when permanent_mac is missing in list of the device\'s options- bsc#1133442 - Increased the DHCP timeout when NetworkManager is in use to its default (45 seconds).- 4.2.12
* Tue Jul 30 2019 Dominique Leuenberger - Requires hostname: there are many places where the module calls /bin/hostname (boo#1142595).- 4.2.11
* Fri Jul 19 2019 Josef Reidinger - avoid dependency on autoyast2-installation- 4.2.10
* Wed Jul 17 2019 Imobach Gonzalez Sosa - Revamp UI internals, adding new widgets, sequences and introducing the concept of interface builder.- Add initial bits of the new data model.- Fix several bugs that were introduced in version 4.2.2.- 4.2.9
* Wed Jul 03 2019 Imobach Gonzalez Sosa - The \'lan\' client returns the correct value (bsc#1140199).- 4.2.8
* Wed Jul 03 2019 Knut Anderssen - bsc#1137346 - CLI: Report an error instead of raising an exception when the device type is not provided and there is no way to infer it from the given options.
* Fri Jun 14 2019 Knut Anderssen - boo#1138297 - Improve some mocking in NetworkService.activate_network_service unit test which caused some test to fail randomly.- 4.2.7
* Fri Jun 14 2019 Knut Anderssen - boo#1138278 - Adapt the AddressDialog to use the new Y2Network::Routing class when checking if there is some default gateway defined.- 4.2.6
* Wed Jun 12 2019 Knut Anderssen - bsc#1136929 - Use the hwinfo permanent mac address instead of the current mac which could be wrong in case of an enslaved interface.- bsc#1137324 - Do not create duplicate udev rule attributes when editing an interface name.- boo#903889 - When proposing a bridge configuration for virtualization, move the routes from the enslaved interface to the new bridge.- 4.2.5
* Fri Jun 07 2019 Stasiek Michalski - Use new schema of desktop files (boo#1084864)- Clean up spec- Rename desktop files- 4.2.4
* Mon May 20 2019 Michal Filka - bnc#1131588 - display a confirmation popup when static route is going to be removed when switching a device to dhcp- 4.2.3
* Wed Apr 24 2019 knut.anderssenAATTsuse.com- Started with yast2-network refactorization: - Added the y2network namespace. - Dropped not used routing_auto client. - Reimplemented completely routing configuration droping the old Yast::Routing module. - The Y2Network::Routing configuration permits to have multiple default routes and does not drop extra options for them. That is, different routing tables can be used. (fate#326796)- 4.2.2
* Mon Apr 22 2019 Imobach Gonzalez Sosa - Fix mode/second_stage value initialization (bsc#1132057)- 4.2.1
* Fri Apr 05 2019 jreidinger - publish find dhcp interfaces to component system, so yapi can be dropped from yast2-samba-client (fate#323734)- 4.2.0
* Thu Apr 04 2019 knut.anderssenAATTsuse.com- bnc#1129012 - AY: Use the bus_id of the udev parent device when using virtio netcards and matching the existent rules with the defined in in the profile.- 4.1.45
* Thu Apr 04 2019 schubiAATTsuse.de- Showing correct start mode for nfsroot device (bsc#1105692).
* Thu Mar 21 2019 knut.anderssenAATTsuse.com- bnc#1094934 - Fixed internal error when writing remote configuration by cmdline (yast remote allow set=yes).- 4.1.44
* Wed Mar 06 2019 Ladislav Slezák - Fixed \"can\'t modify frozen String\" crashes (related to bsc#1125006 and gh#yast/yast-ruby-bindings#228)- 4.1.43
* Wed Feb 27 2019 knut.anderssenAATTsuse.com- Installation proposal (bsc#1127228, bsc#1124478, bsc#1124498): - Fixed issue refreshing the list of packages needed for the default backend the first time the proposal is called. - Do not cache the default network backend but only the current one when modified by the user in the proposal - Fallback to :wicked when saving the network if NetworkManager is selected as the service to be used but not installed.- 4.1.42
* Thu Feb 21 2019 knut.anderssenAATTsuse.com- When renaming an interface (bsc#1060207): - Offer to the user the option to update device routes that belongs to the previous interface name. - Update the Routing devices list with the new one when needed.- Do not drop configured elements from the list when canceling an edition (bsc#998540)- 4.1.41
* Tue Feb 19 2019 knut.anderssenAATTsuse.com- Installation proposal (bsc#1124478, bsc#1124498): - Do not offer NetworkManager when the package is not available - Respect the network backend selected in the proposal at the end of the installation - Removed the hostname write (127.0.0.2) from the summary- 4.1.40
* Tue Feb 12 2019 schubiAATTsuse.de- AutoYaST in running system: Do not reset /etc/hosts (bsc#1122658)- 4.1.39
* Thu Feb 07 2019 knut.anderssenAATTsuse.com- fate#324662 - Drop SuSEFirewall2 code completely. - Permits to choose not only default firewalld zones but also custom ones. - Allow the user to select the \"DEFAULT\" zone or disable the interface zone mapping through ifcfg files per interface.- 4.1.38
* Wed Feb 06 2019 knut.anderssenAATTsuse.com- bsc#1124002 - do not crash when cloning and trying to read a device protocol or portname.- 4.1.37
* Tue Jan 29 2019 mfilkaAATTsuse.com- bnc#1123102 - do not crash with internal error when no hostname is set when submitting device with static configuration- 4.1.36
* Fri Jan 25 2019 knut.anderssenAATTsuse.com- bsc#112952 - Try to install the wireless-tools package when the package is not installed and the wifi networks are scanned.- 4.1.35
* Wed Jan 23 2019 mfilkaAATTsuse.com- bnc#1122387 - do not crash with internal error when modifying /etc/hosts- 4.1.34
* Tue Jan 22 2019 mfilkaAATTsuse.com- bnc#1122517 - do not crash with internal error when cloning /etc/hosts- 4.1.33
* Fri Jan 18 2019 mfilkaAATTsuse.com- bnc#1122307 - do not crash with internal error when adding new device- 4.1.32
* Fri Jan 18 2019 schubiAATTsuse.de- AutoYaST write settings: Fixed crash while reading MAC address (bsc#1121087).- 4.1.31
* Wed Jan 16 2019 mfilkaAATTsuse.com- bnc#1121421 - do not crash with internal error when installing using AutoYaST profile with networking section- 4.1.30
* Thu Jan 10 2019 mfilkaAATTsuse.com- bnc#1111483 - write physical device into vlan\'s configuration- 4.1.29
* Fri Jan 04 2019 schubiAATTsuse.de- Added needed method GetDHCPHostnameIP again (bsc#1119690).- 4.1.28
* Fri Jan 04 2019 mfilkaAATTsuse.com- bnc#1116568 - /etc/hosts load performance improvements- 4.1.27
* Wed Jan 02 2019 schubiAATTsuse.de- Showing correct start mode for nfsroot device (bsc#1105692).- 4.1.26
* Tue Dec 18 2018 mfilkaAATTsuse.com- bnc#1119723 - properly copy ifcfg files from instsys to target- 4.1.25
* Mon Dec 10 2018 jreidingerAATTsuse.com- always use absolute path to binaries (bsc#1118291)- properly escape shell arguments (bsc#1118291)- 4.1.24
* Mon Dec 10 2018 Stefan Hundhammer - Security audit fixes: Removed unused function stdout_of() (part of bsc#1118291)- 4.1.23
* Thu Dec 06 2018 Stefan Hundhammer - Security audit fixes: Use absolute paths when calling external commands and shell-escape arguments (bsc#1118291)- 4.1.22
* Tue Dec 04 2018 mfilkaAATTsuse.com- bnc#1114213 - improved help for dns nameserver address to mention also valid format of IPv6- 4.1.21
* Thu Nov 29 2018 Noah Davis - Provide icon with module (boo#1109310)- 4.1.20
* Mon Nov 26 2018 mfilkaAATTsuse.com- bnc#934055, bnc#972463 - cleanup in Hostname / DNS tab - removed obsolete or unsupported options.- 4.1.19
* Mon Nov 26 2018 mfilkaAATTsuse.com- bnc#709176 - keep original hostnames untouched in /etc/hosts when only IP changed- 4.1.18
* Thu Nov 22 2018 mfilkaAATTsuse.com- bnc#1107470 - this bug is fixed since 4.0.14 (3.2.47)
* Sun Nov 11 2018 knut.anderssenAATTsuse.com- Yast::Lan: Added method for obtaining the NTP servers offered by DHCP (fate#323454)- 4.1.17
* Fri Nov 09 2018 dgonzalezAATTsuse.com- Allow to swich the network backend from the proposal (related to fate#326480)- 4.1.16
* Wed Oct 31 2018 mfilkaAATTsuse.com- bnc#1111925 - always propose wpa_supplicant when configuring wlan- bsc#1113080 - Fix detection of peap mode (jreidingerAATTsuse.com)- Propose most commonly used setup for WPA by default- 4.1.15
* Wed Oct 24 2018 jreidingerAATTsuse.com- Fix detection of peap mode (bsc#1113080)- 4.1.14
* Tue Oct 16 2018 knut.anderssenAATTsuse.com- Simplified the installation network proposal collecting all the configured dhcp interfaces in a single entry (fate#326480)- 4.1.13
* Tue Oct 16 2018 mfilkaAATTsuse.com- bsc#1110598 - fixed path to license file- 4.1.12
* Mon Oct 15 2018 mfilkaAATTsuse.com- fate#323454 - wicked compatible parsing of NTP servers from dhcp leases- 4.1.11
* Thu Oct 04 2018 knut.anderssenAATTsuse.com- Fixes to the networking AY schema (bsc#1108852) - Added missed s390 device \'layer2\' boolean element.- 4.1.10
* Wed Oct 03 2018 mfilkaAATTsuse.com- bnc#1105230 - do not crash with internal error when 0.0.0.0 netmask is used in the routing tab- Activate s390 network devices before applying udev naming rules, avoiding \"Invalid key/value pair in /etc/udev/rules.d/70-persistent-net.rules\" (bsc#1095761) (by mvidnerAATTsuse.com)- 4.1.9
* Tue Oct 02 2018 mfilkaAATTsuse.com- bnc#1109312 - fixed internal error (replaced calls to LanItems::FreeDevices which was removed)- 4.1.8
* Tue Sep 18 2018 mfilkaAATTsuse.com- bnc#964856 - adapted to changes in NetworkInterfaces API - GetFreeDevice and GetFreeDevices was dropped- 4.1.7
* Wed Aug 22 2018 dgonzalezAATTsuse.com- Update calls to YaST2 systemd classes (related to fate#319428)- 4.1.6
* Tue Aug 21 2018 schubiAATTsuse.de- Changed dir of COPYING file.
* Fri Aug 03 2018 knut.anderssenAATTsuse.com- Fixes to the networking AY schema (bsc#1103712) - Permitted the use of \'listentry\' element in list entries.- 4.1.5
* Thu Jul 12 2018 mfilkaAATTsuse.com- bnc#964856 - dropped calls to obsolete NetworkInterfaces API - CLI: setting device type explicitly using new type option is mandatory when adding new device- 4.1.4
* Mon Jul 02 2018 schubiAATTsuse.de- lan_test: stubbin Host.GetModified call (bnc#1052042).- 4.1.3
* Mon Jul 02 2018 schubiAATTsuse.de- Fixed flickering testcase which has been introduced by fixing bnc#1052042.- 4.1.2
* Thu Jun 28 2018 schubiAATTsuse.de- Added additional searchkeys to desktop file (fate#321043).
* Tue Jun 26 2018 mfilkaAATTsuse.com- removed NetworkStorage as it is unused (had been replaced by storage-ng)
* Fri Jun 22 2018 schubiAATTsuse.de- Removed AutoYaST dependencies in order to run the host module without AutoYaST packages (bnc#1098407).- 4.1.1
* Wed Jun 20 2018 mfilkaAATTsuse.com- dropped dead code- 4.1.0
* Wed Jun 20 2018 mfilkaAATTsuse.com- bnc#1086454 - do not enforce particular mode for IPoIB devices by default- 4.0.35
* Mon Jun 18 2018 mfilkaAATTsuse.com- bnc#1097954 - fixed several rpmlint warnings- 4.0.34
* Tue Jun 12 2018 schubiAATTsuse.de- AutoYaST: Checking for empty host name entries and informing the user. (bnc#1095113) 4.0.33
* Thu Jun 07 2018 knut.anderssenAATTsuse.com- AutoYaST: Do not crash when trying to convert the /etc/hosts profile declaration from multiple line host entries for the same host to just one line (bnc#1095971)- 4.0.32
* Wed May 09 2018 knut.anderssenAATTsuse.com- Fix the check for adjusting ifcfg configuration in case of network based root filesystem when saving the network at the end of the installation (bsc#1090752).- 4.0.31
* Wed Apr 25 2018 knut.anderssenAATTsuse.com- Y2remote: When vnc is disabled disable also all the services that are still enabled (bsc#1088646)- 4.0.30
* Wed Apr 25 2018 mfilkaAATTsuse.com- bnc#1077435 - do not crash with internal error when /etc/hosts is corrupted- 4.0.29
* Mon Apr 23 2018 mfilkaAATTsuse.com- bnc#1089471 - previous fix contains wrong check of ifcfg options and proposes wpa_supplicant incorrectly. The check was fixed and wpa_supplicant is proposed when needed only.- 4.0.28
* Sat Apr 21 2018 mfilkaAATTsuse.com- bnc#1089471 - do not propose vlan, iw and tunctl packages for installation as its functionality is implemented by wicked.- 4.0.27
* Thu Apr 19 2018 knut.anderssenAATTsuse.com- Y2Remote: - Fixed the start of services when writing (bsc#1088646) - Fixed the modification of vnc services configuration according to the selection of allowed interfaces (bsc#1088647)- 4.0.26
* Fri Apr 06 2018 knut.anderssenAATTsuse.com- Fixed preformatted proposal for network module (bsc#1088488)- 4.0.25
* Tue Mar 27 2018 lslezakAATTsuse.cz- Added missing \"textdomain\" call to properly translate the web access check box label (bsc#1081466)- 4.0.24
* Wed Mar 21 2018 knut.anderssenAATTsuse.com- Added networking interfaces \'zone\' element to the AutoYaST schema file (bsc#1013047)- 4.0.23
* Fri Mar 16 2018 knut.anderssenAATTsuse.com- Read and write the firewalld configuration when the remote access is configured through the remote client dialog (bsc#1085658)- 4.0.22
* Thu Mar 08 2018 knut.anderssenAATTsuse.com- bsc#1078991 - Do not crash when some LanItem does not have hardware info.- 4.0.21
* Tue Mar 06 2018 knut.anderssenAATTsuse.com- Tigervnc will provide the definition of firewalld services so we will use them instead of the vnc-server service definition that is shipped with firewalld (bsc#1081952)- 4.0.20
* Thu Mar 01 2018 knut.anderssenAATTsuse.com- save_network client copies wicked dhcp files from inst-sys into the target using the same dhcp id when rebooting after installation. (bsc#1082832)- 4.0.19
* Thu Mar 01 2018 lslezakAATTsuse.cz- Fixed a random build failure (introduced by the previous fix for bsc#1083015)- 4.0.18
* Tue Feb 27 2018 jreidingerAATTsuse.com- add missing textdomains (bsc#1083015)- 4.0.17
* Fri Feb 23 2018 knut.anderssenAATTsuse.com- Really translate firewalld zones (bsc#1082246)- 4.0.16
* Wed Feb 14 2018 knut.anderssenAATTsuse.com- Virtualization Bridge Proposal: Do not propose network interfaces without link as bridgeable (bsc#1062596, bsc#1072951).- 4.0.15
* Wed Jan 24 2018 mfilkaAATTsuse.com- bnc#1056109 - improved device name collision recognition when applying device renaming according to the AY profile- 4.0.14
* Mon Dec 11 2017 knut.anderssenAATTsuse.com- Remote: reimplemented the module dialogs and clients under y2remote libdir.- Fixed restart of xvnc as it is now a socket instead of a service (bsc#1070582).- 4.0.13
* Mon Dec 04 2017 mfilkaAATTsuse.com- bnc#1061306 - use API for accessing device\'s sysconfig to avoid internal errors- 4.0.12
* Wed Nov 29 2017 knut.anderssenAATTsuse.com- Switched VNC service from xinetd to systemd.- VNC over HTTP service can be enabled/disabled separately. (fate#323880, bnc#1058460)- 4.0.11
* Fri Nov 24 2017 knut.anderssenAATTsuse.com- Do not depend on SuSEFirewall for zone interface change. The zone is now written in the ifcfg-file and wicked takes care of calling firewalld commandline. (fate#323460)- 4.0.10
* Wed Nov 22 2017 knut.anderssenAATTsuse.com- AutoYaST: Do not display a warning about second stage being disabled when importing the DNS configuration (added in 3.3.1) once the network configuration is done during the first stage (since version 3.3.3) (bsc#1069761)- 4.0.9
* Wed Nov 15 2017 knut.anderssenAATTsuse.com- bnc#1066982 - Removed an unnecesary SuSEFirewall.Write call when storing the Firewall remote client configuration.- 4.0.8
* Tue Nov 14 2017 jreidingerAATTsuse.com- bnc#1066982 - fixed initialization and storing of firewall widget- 4.0.7
* Fri Nov 03 2017 knut.anderssenAATTsuse.com- Fixed a method name typo and removed SuSEFirewall from Routing module (bsc#572202)- 4.0.6
* Wed Nov 01 2017 mfilkaAATTsuse.com- bnc#1052042 - properly update canonical name and aliases in /etc/hosts when FQDN is provided as a hostname- 4.0.5
* Wed Oct 25 2017 knut.anderssenAATTsuse.com- Do not depend on SuSEfirewall2 anymore for writing IPv4 forwarding as Firewalld will be the default FW in SLE15. (fate#323460, bsc#572202)- 4.0.4
* Thu Oct 05 2017 schubiAATTsuse.de- Remote settings: Only reading firewall settings if we are really in an installed system. (bnc#1055279, bnc#1058071)- 4.0.3
* Wed Oct 04 2017 knut.anderssenAATTsuse.com- AutoYaST: Do not display a warning about disabled second stage when if network is configured before the proposal (bsc#1054400)- 4.0.2
* Fri Sep 29 2017 knut.anderssenAATTsuse.com- Do not blank out /etc/hosts when no section is defined (bsc#1058396)- 4.0.1
* Tue Sep 26 2017 knut.anderssenAATTsuse.com- Preload the global DHCLIENT_SET_HOSTNAME option based on linuxrc sethostname option if given or based in control file default if not. (bsc#1054933)- Do not override the configuration with the default defined in the control file at the end of the first stage (bsc#1056633)- 4.0.0
* Wed Aug 30 2017 knut.anderssenAATTsuse.com- Moved wrap_text method to yast2 UI::TextHelpers (bsc#1055643)- 3.3.12
* Mon Aug 21 2017 lslezakAATTsuse.cz- AutoYaST: Do not display a warning about disabled second stage when the hostname setting is read out of profile (bsc#1054400)- 3.3.11
* Mon Aug 21 2017 mfilkaAATTsuse.com- bnc#1039656 - do not clear /etc/hosts when installing virtual Host
* Thu Aug 17 2017 mfilkaAATTsuse.com- restored part of version 3.3.3 (bnc#1049814) which was accidentaly dropped in subsequent versions- 3.3.10
* Thu Aug 17 2017 snwintAATTsuse.de- use storage-ng code to determine if \"/\" is on a network filesystem- 3.3.9
* Mon Aug 14 2017 snwintAATTsuse.com- merge storage-ng branch to master (fate#318196)- note: all changes below with this date belong to the merge- 3.3.8
* Mon Aug 14 2017 ancorAATTsuse.com- storage-ng: adapted calls to temporary y2storage_
* methods, since they were finally removed from Y2Storage::StorageManager.
* Mon Aug 14 2017 gsouzaAATTsuse.com- Added support to storage-ng so it can verify if a disk is in network.- Updated dependencies to include storage-ng.
* Mon Aug 14 2017 shundhammerAATTsuse.de- Merged master to storage-ng branch
* Mon Aug 14 2017 ancorAATTsuse.com- Version temporarily bumped to 3.3.x to prioritize the storage-ng branch
* Mon Aug 14 2017 ancorAATTsuse.com- storage-ng: commented remaining code relying on the old yast2-storage- Removed yast2-storage dependency
* Mon Aug 14 2017 ancorAATTsuse.com- storage-ng: commented installation-related code relying on the old yast2-storage- Version temporarily bumped to 3.2.x to prioritize this branch
* Mon Aug 14 2017 mfilkaAATTsuse.com- bnc#1047615 - check if /etc/hosts exists before loading its content- 3.3.7
* Tue Aug 08 2017 igonzalezsosaAATTsuse.com- bnc#1037727 - fixed device name recognition during AY installation- 3.3.6
* Wed Aug 02 2017 knut.anderssenAATTsuse.com- bsc#1051624 - Fix default values for not existent sysconfig network variables when read.- 3.3.5
* Fri Jul 28 2017 igonzalezsosaAATTsuse.com- bnc#1050986 - fix udev rules export when more than one device is configured- bnc#1037727 - dhclient configuration warning message does not block AutoYaST- 3.3.4
* Thu Jul 27 2017 knut.anderssenAATTsuse.com- bsc#1039851 - Host: Load /etc/hosts entries before import the ones defined in a given AutoYaST profile making it backward compatible.
* Wed Jul 12 2017 mfilkaAATTsuse.com- bnc#1038717 - avoid creating duplicate udev rules in AutoYaST installation
* Tue Jul 11 2017 mfilkaAATTsuse.com- bnc#1049814 - Moving network setup in AY into first stage completely when the second stage is disabled.- 3.3.3
* Mon Jul 10 2017 jreidingerAATTsuse.com- Fix crash during write if Host.Read and Host.Import is called together (bsc#1047929)- 3.3.2
* Tue Jul 04 2017 lslezakAATTsuse.cz- Display a warning in AutoYaST installation when importing the DNS configuration with disabled seconds stage (the second stage is currently required for writing the config) (bsc#1046198)- 3.3.1
* Tue Jul 04 2017 mfilkaAATTsuse.com- bnc#1046735 - do not update sysconfig when no IP is given in case of static NIC configuration.
* Tue Jul 04 2017 mfilkaAATTsuse.com- bsc#1044982 - handle bad pci class/subclass ids used by Mellanox ConnectX-3 - nmoreychaisemartinAATTsuse.com- 3.3.0
* Tue Jul 04 2017 mfilkaAATTsuse.com- bnc#1046677 - disable widgets which cannot be configured by the selected network service- 3.2.29
* Thu May 25 2017 mfilkaAATTsuse.com- bnc#1039532 - do not write hostname into /etc/hosts duplicitly for one IP - configure static IPs without own hostname to resolve to system wide hostname during installation- 3.2.28
* Mon May 22 2017 gsouzaAATTsuse.com- bsc#1036440 and bsc#994471 - Command \"yast remote list\" should not alter the system.- 3.2.27
* Wed May 17 2017 mfilkaAATTsuse.com- bnc#1038521 - do not raise an internal error during installation when multiple static device and hostname configurations were provided- 3.2.26
* Tue May 16 2017 knut.anderssenAATTsuse.com- bsc#1035908 - Moved inst_install_inf client to yast2-installation.- 3.2.25
* Tue Apr 04 2017 knut.anderssenAATTsuse.com- bsc#956755 - Don\'t propose wlan interfaces for the virtualization bridge.- 3.2.24
* Mon Apr 03 2017 mfilkaAATTsuse.com- bnc#927629 - improved adding routes. Accepts netmask or prefix length. - fixed column name in add route dialog from Genmask to more common Netmask- 3.2.23
* Thu Mar 30 2017 knut.anderssenAATTsuse.com- Fix typo in edit_nic_name dialog using bus_id instead of busid (bsc#1031120)- 3.2.22
* Tue Mar 21 2017 jreidingerAATTsuse.com- adapt to new version of cfa (new cfa needed for bsc#1023204)- 3.2.21
* Wed Feb 22 2017 mfilkaAATTsuse.com- bnc#1020074 - when incomplete udev rule is read from the AY profile, it is ignored instead of raising an internal error.- 3.2.20
* Thu Jan 19 2017 kanderssenAATTsuse.com- Added network proposal using the new summary api and the new proposal_client flag \'label_proposal\' for CASP special formmating (fate#322328).- 3.2.19
* Wed Jan 18 2017 kanderssenAATTsuse.com- Added summaries for the configured interfaces, particulary an one line summary. (fate#322328)
* Wed Jan 11 2017 kanderssenAATTsuse.com- Fixed the assignment of udev rules to Lan Items when a previous one does not exist (bsc#996879).- 3.2.18
* Fri Dec 09 2016 mfilkaAATTsuse.com- bnc#1013605 - Enable DHCP_HOSTNAME listbox only when wicked service is used. - Fixed displaying the \"keep current settings\" option.- 3.2.17
* Wed Dec 07 2016 mfilkaAATTsuse.com- bnc#1013684 - do not crash with internal error when setting static setup for newly added device- 3.2.16
* Wed Nov 30 2016 kanderssenAATTsuse.com- Linuxrc does not export some variables anymore and handles the configuration of network directly, for that reason, some methods or reponsibilities of InstallInfConvertor class are not needed being removed.
* Wed Nov 30 2016 mfilkaAATTsuse.com- bnc#1012764 - made rpm architecture independent (noarch)- 3.2.15
* Tue Nov 29 2016 mfilkaAATTsuse.com- bnc#1012581 - do not crash with internal error stating undefined method when switching to \"Hostname / DNS\" tab when the system contains incorrect configuration of DHCLIENT_SET_HOSTNAME- 3.2.14
* Mon Nov 28 2016 mfilkaAATTsuse.com- bnc#1009931 - update item\'s overview with freshly edited values- 3.2.13
* Wed Nov 23 2016 mfilkaAATTsuse.com- bsc#984890 - new implementation of setting hostname via DHCP. User is allowed to set hostname via particular interface or set a reasonable default value for all interfaces.- bsc#1007172 (kanderssenAATTsuse.com) - When an interface is enslaved in a bond the udev rule is modified using the bus_id instead of the mac address but some multiport cards could use the same bus_id. In such cases also the dev_port is needed. Taking this in account the dev_port will be added always when a udev rule based on bus_id is written.- 3.2.12
* Tue Nov 22 2016 igonzalezsosaAATTsuse.com- Do not crash when removing an entry from the /etc/hosts file (bsc#1010994)- 3.2.11
* Tue Nov 22 2016 jreidingerAATTsuse.com- do not crash when on command line is passed non-number id (bsc#1003908)- 3.2.10
* Thu Oct 27 2016 jreidingerAATTsuse.com- Make network summary consistent with other summaries (bsc#745940)- 3.2.9
* Tue Oct 25 2016 mvidnerAATTsuse.com- Fixed a hardcoded interface name in a CLI test (bsc#1006799)- 3.2.8
* Mon Oct 17 2016 kanderssenAATTsuse.com- Bridge handling has been improved (bsc#962824). - \"NONE\" is shown instead of 0.0.0.0 for old bridge configuration - The bridge master is shown in the enslaved interface. - The interfaces overview is updated after a bridge is modified - The interfaces enlsaved are not lost when save in a different tab.- 3.2.7
* Mon Oct 17 2016 jreidingerAATTsuse.com- fix crash when dummy ip is not needed (found during testing of bsc#877047)- 3.2.6
* Fri Oct 14 2016 jreidingerAATTsuse.com- optimize loading /etc/hosts if there is a lot of entries (bsc#877047)- 3.2.5
* Mon Oct 10 2016 mfilkaAATTsuse.com- do not duplicate work of network service at the beginning of AutoYaST\'s second stage - not loading modules and so on.- 3.2.4
* Fri Oct 07 2016 kanderssenAATTsuse.com- If an interface is not configured yet then just set the interface link, the backend should handle at least the up event. (bsc#991694)- 3.2.3
* Fri Oct 07 2016 ancorAATTsuse.com- Extra space in the remote administration dialog (bsc#988904)
* Thu Oct 06 2016 mfilkaAATTsuse.com- Use full interface up / down instead of setting just link up / down to allow proper update of interface\'s configuration. (bsc#991694)- 3.2.2
* Wed Oct 05 2016 ancorAATTsuse.com- If WIFI is configured during installation, make sure the packages required for WIFI to work are installed in the resulting system (bsc#1002700)- 3.2.1
* Wed Sep 21 2016 jreidingerAATTsuse.com- reduce rpm build time (bsc#999203)- 3.2.0
* Wed Sep 07 2016 mfilkaAATTsuse.com- bnc#993587 - extended fix from 3.1.168 to cover also virtual interfaces- 3.1.170
* Sat Sep 03 2016 mfilkaAATTsuse.com- bnc#988157 - disable DHCP autoconfiguration in installer when an interface configuration is provided via linuxrc- 3.1.169
* Wed Aug 24 2016 mfilkaAATTsuse.com- bnc#993587 - installer is able to newly configured set devices up in case of ssh/vnc installation- 3.1.168
* Fri Aug 19 2016 mfilkaAATTsuse.com- bnc#991382 - init and store IFPLUGD_PRIORITY properly- 3.1.167
* Thu Aug 18 2016 mfilkaAATTsuse.com- bnc#991486 - extended fix for this bug from 3.1.163. Do not report invalid names incorrectly- 3.1.166
* Thu Aug 11 2016 mfilkaAATTsuse.com- bnc#985905 - do not limit number of bonding slaves to 10- 3.1.165
* Thu Aug 11 2016 mfilkaAATTsuse.com- bnc#988786 - Create bridge when proposing configuration for VM host.- 3.1.164
* Wed Aug 10 2016 ancorAATTsuse.com- Improved parsing of vlan ids that are longer than one character.
* Wed Aug 10 2016 mfilkaAATTsuse.com- bnc#991486 - Do not allow creating device with oversized configuration name.- 3.1.163
* Tue Aug 09 2016 schubiAATTsuse.de- Added entry \"s390-devices\" to the AutoYaST schema file. Bug similar bnc#954412.- 3.1.162
* Tue Aug 09 2016 mfilkaAATTsuse.com- bnc#991920 - do not crash with internal error when renaming unconfigured device- 3.1.161
* Tue Aug 02 2016 mfilkaAATTsuse.com- bnc#991382 - Do not crash with internal error when using \"On Cable Connection\" device activation mode.- 3.1.160
* Tue Jul 12 2016 schubiAATTsuse.de- Added entry \"dhclient_set_hostname\" to the AutoYaST schema file. Bug similar bnc#954412.- 3.1.159
* Thu Jun 23 2016 mfilkaAATTsuse.com- bnc#970320, bnc#865132, bnc#852604 - do not overwrite Postfix MTA configuration when saving network setup- 3.1.158
* Tue Jun 21 2016 igonzalezsosaAATTsuse.com- bsc#984146 - set AutoYaST keep_install_network parameter to \'true\' by default - restore the default behavior present in SLE 12 SP1 and openSUSE Leap 42.1- 3.1.157
* Tue Jun 14 2016 mfilkaAATTsuse.com- bnc#983201 - do not crash with internal error when configuring new device on s390- 3.1.156
* Mon Jun 13 2016 mfilkaAATTsuse.com- fate#318787 - detect modifications when closing module, do not restart when not needed.- 3.1.155
* Wed Jun 01 2016 igonzalezsosaAATTsuse.com- Drop yast2-network-devel-doc package (fate#320356)- 3.1.154
* Tue May 31 2016 mfilkaAATTsuse.com- bnc#981842 - enable / disable vncmanager only when installed to avoid failures in systemd calls- 3.1.153
* Thu May 19 2016 mfilkaAATTsuse.com- fate#319319 - implemented support for vncmanager in Remote module. Thanks to msrbAATTsuse.cz.- 3.1.152
* Tue May 17 2016 mfilkaAATTsuse.com- bnc#971175 - /etc/hosts is correctly updated with static address, hostname when static net configuration is done via linuxrc and hostname is provided by AY profile- 3.1.151
* Fri May 13 2016 knut.anderssenAATTsuse.com- fate#315995 - Added physical port id to device overview and bond slaves item description if supported. - Warn the user when two or more bonded interfaces share the same physical port. - Available interfaces for bonding in bond slaves tab are now sorted and moving them up or down maintain the interface selected.- 3.1.150
* Mon May 02 2016 mfilkaAATTsuse.com- bnc#977953 - added dependency on yast2-proxy. \"yast2 lan\" won\'t fail with internal error (missing Proxy module), when yast2-network is installed into a minimal server installation.- 3.1.149
* Tue Apr 19 2016 mfilkaAATTsuse.com- bnc#966694 - TigerVNC Viewer Error: No matching security types. Do not touch VNC arguments when enabling or disabling it. Thanks to msrbAATTsuse.com for the patch.- 3.1.148
* Tue Apr 12 2016 mfilkaAATTsuse.com- bnc#974910 - fixed internal error when no \"interfaces\" group is found in an AY profile- 3.1.147
* Mon Apr 11 2016 mfilkaAATTsuse.com- bnc#955217, bnc#956605 - fixed internal error caused by the previous patch- 3.1.146
* Mon Apr 04 2016 mfilkaAATTsuse.com- bnc#955217, bnc#956605 - unified udev rule handling by always doing it in the 1st stage of installation.- 3.1.145
* Sun Mar 06 2016 mfilkaAATTsuse.com- bnc#920089 - fix by Damir Porobic - fixed layout of dialog for new route definition- 3.1.144
* Mon Feb 22 2016 mfilkaAATTsuse.com- bnc#960703 - sometimes wicked was started instead of NetworkManager in case of AY installation. Moreover it could happen that both services were \"half-started\" and network setup got broken.- bsc#903190 - Recognized netcard with sub_class_id 07 as InfiniBand (ib) which now are not filtered out (knut.anderssenAATTsuse.com).- 3.1.143
* Fri Jan 29 2016 knut.anderssenAATTsuse.com- Removed old testsuites tests and autotools, so yast2-testsuite is not required anymore (fate#314695).- 3.1.142
* Fri Jan 22 2016 mvidnerAATTsuse.com- Fixed an Internal error when aborting the configuration of a WiFi interface (bsc#950902).- 3.1.141
* Wed Dec 02 2015 mfilkaAATTsuse.com- bnc#957377 - When exporting AutoYaST profile, it contains dns configuration even when this config was provided via linuxrc.- 3.1.140
* Mon Nov 30 2015 mfilkaAATTsuse.com- bnc#951330 - drop record from /etc/hosts when deleting nic configuration- bsc#954412 (igonzalezsosaAATTsuse.com) - Fix validation of AutoYaST profiles- 3.1.139
* Wed Nov 25 2015 mfilkaAATTsuse.com- bnc#956605 - Write udev rules for renamed devices for non ssh / vnc AutoYaST installations- 3.1.138
* Mon Nov 23 2015 mfilkaAATTsuse.com- bnc#956012 - When exporting AutoYaST profile, it contains route definitions even when these routes were configured using linuxrc.- 3.1.137
* Mon Nov 16 2015 mfilkaAATTsuse.com- bnc#955217 - do not raise internal error during AY installation with profile containing device renaming rule for unconfigured interface- 3.1.136
* Mon Nov 16 2015 mfilkaAATTsuse.com- bnc#944349 - do not set links down when running AY installation over vnc. VNC installation do not freeze. - renaming network devices during ssh/vnc installation is supported-3.1.135
* Sun Nov 08 2015 mfilkaAATTsuse.com- bnc#944349 - do not set links down when running AY installation over ssh. SSH installation do not freeze.- 3.1.134
* Thu Oct 08 2015 mvidnerAATTsuse.com- Fixed \"Relax-NG parser error : Some defines for ipv6_forward needs the combine attribute\" when checking validity of any AutoYaST profile (bsc#948206).- 3.1.133
* Tue Oct 06 2015 mfilkaAATTsuse.com- bnc#900647 - fixed to accept an empty domain in /etc/hostname- 3.1.132
* Thu Oct 01 2015 mvidnerAATTsuse.com- Moved \"Network Settings\" into \"System\" group also in the Gnome/GTK control center (FATE#318804, bsc#867809).- 3.1.131
* Wed Sep 23 2015 mfilkaAATTsuse.com- bnc#866742 - Do not fail with internal error when cloning configuration twice in a row- 3.1.130
* Wed Sep 16 2015 mfilkaAATTsuse.com- bnc#945947 - Routing module returns correct return code when invoked from command line- 3.1.129
* Thu Aug 27 2015 mfilkaAATTsuse.com- bnc#846201 - made bridge port selection persistent across tab switching- 3.1.128
* Tue Aug 18 2015 mfilkaAATTsuse.com- bnc#940892 - fixed internal error when importing AY profile- 3.1.127
* Tue Aug 18 2015 igonzalezsosaAATTsuse.com- bsc#941948 - lan_auto client returns value properly- 3.1.126
* Mon Aug 10 2015 mfilkaAATTsuse.com- bnc#916013 - IPv4 forwarding always enabled upon finishing setup- 3.1.125
* Wed Aug 05 2015 mfilkaAATTsuse.com- bnc#916013 - IPv6 forwarding setup is stored persistently- 3.1.124
* Fri Jul 31 2015 ancorAATTsuse.com- bnc#940192, bnc#935937 - fixed crash deleting interfaces using CLI (yast lan delete)- 3.1.123
* Wed Jul 01 2015 mfilkaAATTsuse.com- bnc#864264 - fixed internal error in adding alias- 3.1.122
* Tue Jun 30 2015 mvidnerAATTsuse.com- Fixed warnings like \'duplicated key at line 230 ignored: \"rt73usb\"\' (boo#930870) (recording a fix present in 3.1.116 already).
* Thu Jun 25 2015 mfilkaAATTsuse.com- bnc#922765, bnc#923990 - fixed default domain proposal- 3.1.121
* Thu Jun 18 2015 mfilkaAATTsuse.com- bnc#930448 - display proper startmode description in Overview dialogue- 3.1.120
* Mon Jun 15 2015 igonzalezsosaAATTsuse.com- Fix handling of AutoYaST parameter keep_install_network- 3.1.119
* Thu Jun 11 2015 mfilkaAATTsuse.com- fate#318804 - moved \"Network Settings\" into \"System\" group in YaST control centre- 3.1.118
* Wed Jun 10 2015 mfilkaAATTsuse.com- bnc#934180 - fixed internal error in lan AutoYaST client.- 3.1.117
* Mon Jun 08 2015 mfilkaAATTsuse.com- bnc#874259 - keep device configuration provided via linuxrc when autoyast keep_install_network is set- 3.1.116
* Mon May 18 2015 locilkaAATTsuse.com- bsc#916376 - proposing iSCSI-related configuration in firewall proposal in first stage if iSCSI is in use- 3.1.115
* Mon Apr 27 2015 mfilkaAATTsuse.com- bnc#912904 - do not crash when adding new device and proposed configuration name is changed to new one- bnc#914833 - do not crash when renaming virtual device via hardware tab- bnc#910337 - initialize configuration name in Hardware tab correctly. It means according device type. Also uses custom name if user used nonstandard one.- bnc#905738 - udev rules provided by AutoYaST profile gets applied- bnc#918356 - populate bond slave candidates list with proper device names- 3.1.114
* Wed Jan 28 2015 lslezakAATTsuse.cz- fixed a build failure when building against the latest yast2 package- 3.1.113
* Tue Dec 23 2014 mvidnerAATTsuse.com- Removed a bash specific post script with a workaround for an ancient bug (bnc#39842).- 3.1.112
* Thu Dec 04 2014 jreidingerAATTsuse.com- remove X-KDE-Library from desktop file (bnc#899104)
* Fri Nov 28 2014 mfilkaAATTsuse.com- bnc#906694 - fixed exception raised due to modifying frozen string when running in localized mode- 3.1.110
* Fri Oct 17 2014 mfilkaAATTsuse.com- bnc#898250, bnc#899363 - ignore /etc/install.inf:usessh flag when the file is present in installed system and always reload / restart network service in case of updated configuration- 3.1.109