Changelog for
kexec-tools-2.0.26-10.el8.x86_64.rpm :
* Tue Sep 26 2023 Pingfan Liu
- 2.0.26-10- Introduce a function to get reserved memory size
* Tue Sep 19 2023 Pingfan Liu - 2.0.26-9- Add lvm thin provision to kdump supported-kdump-targets.txt
* Thu Aug 10 2023 Pingfan Liu - 2.0.26-8- mkdumprd: Use the correct syntax to redirect the stderr to null- mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS- Add NICs that handle DNS queries to the allowlist
* Wed Jul 12 2023 Pingfan Liu - 2.0.26-7- Revert \"Revert \"Append both nofail and x-systemd.before to kdump mount target\"
* Thu Jun 29 2023 Pingfan Liu - 2.0.26-6- dracut-module-setup.sh: skip installing driver for the loopback interface- Reduce kdump memory consumption by only installing needed NIC drivers
* Tue Jun 13 2023 Pingfan Liu - 2.0.26-5- Revert \"Append both nofail and x-systemd.before to kdump mount target\"
* Wed May 31 2023 Pingfan Liu - 2.0.26-4- Only rename the virtual Azure Hyper-V network interface
* Tue May 16 2023 Pingfan Liu - 2.0.26-3- Don\'t rename Azure Hyper-V network interface
* Thu Apr 20 2023 Pingfan Liu - 2.0.26-2- sadump: fix failure of reading memory when 5-level paging is enabled
* Tue Apr 04 2023 Pingfan Liu - 2.0.25-7- Rebase makedumpfile to 1.7.2
* Tue Mar 14 2023 Pingfan Liu - 2.0.25-6- sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390
* Wed Jan 18 2023 Pingfan Liu - 2.0.25-5- dracut-module-setup: Fix invalid rd.znet command line entry- dracut-module-setup: Fix persistent nic name on s390
* Mon Jan 09 2023 Pingfan Liu - 2.0.25-4- Don\'t check fs modified when dump target is lvm2 thinp- Add dependency of dracut lvmthinpool-monitor module- lvm.conf should be check modified if lvm2 thinp enabled- Add lvm2 thin provision dump target checker- Fix the sync issue for dump_fs
* Fri Dec 02 2022 Pingfan Liu - 2.0.25-3- kdump.conf: use a simple generator script to maintain- Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces
* Mon Oct 17 2022 Pingfan Liu - 2.0.25-2- mkdumprd: Improve error messages on non-existing NFS target directories- fadump: avoid non-debug kernel use for fadump case
* Sun Sep 18 2022 Pingfan Liu - 2.0.24-7- kdumpctl: make the kdump.log root-readable-only
* Mon Jul 18 2022 Pingfan Liu - 2.0.24-6- kdump-lib: Add the CoreOS kernel dir to the boot_dirlist- kdump-lib: attempt to fix BOOT_IMAGE detection- kdump-lib: change how ostree based systems are detected- kdump-lib: clear up references to Atomic/CoreOS
* Mon Jul 04 2022 Pingfan Liu - 2.0.24-5- kdump-lib: use non-debug kernels first
* Tue Jun 21 2022 Pingfan Liu - 2.0.24-4- kdump-lib.sh: Check the output of blkid with sed instead of eval
* Fri Jun 10 2022 Pingfan Liu - 2.0.24-3- kdump.sysconfig
*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE
* Fri May 27 2022 Pingfan Liu - 2.0.24-2- kdumpctl: fix missed dollar sign
* Thu May 05 2022 Pingfan Liu - 2.0.24-1- kdumpctl: sync the $TARGET_INITRD after rebuild- Avoid false-positive mem_section validation with vmlinux- Rebase kexec-tools to 2.0.24- Rebase makedumpfile to 1.7.1
* Fri Apr 15 2022 Pingfan Liu - 2.0.20-69- s390: add support for --reuse-cmdline- use slurp_proc_file() in get_command_line()- add slurp_proc_file()- s390: use KEXEC_ALL_OPTIONS- s390: add variable command line size- util_lib/elf_info: harden parsing of printk buffer- print error when reading with unsupported compression- use cycle detection when parsing the prink log_buf- use pointer arithmetics for dump_dmesg- add generic cycle detection
* Thu Jan 27 2022 Pingfan Liu - 2.0.20-68- Revert \"Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel\"
* Fri Dec 24 2021 Pingfan Liu - 2.0.20-67- Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel
* Fri Dec 10 2021 Pingfan Liu - 2.0.20-66- kdump/ppc64: suppress the error message \"Could not find a registered notification tool\" from servicelog_notify- Enable zstd compression for makedumpfile in kexec-tools.spec
* Thu Dec 02 2021 Pingfan Liu - 2.0.20-65- mkdumprd: drop mountaddr/mountproto nfs mount options
* Fri Nov 26 2021 Pingfan Liu - 2.0.20-64- add keytuils as a weak dependency for POWER
* Fri Nov 19 2021 Pingfan Liu - 2.0.20-63- Document/kexec-kdump-howto.txt: fix escape
* Wed Nov 17 2021 Pingfan Liu - 2.0.20-62- Document/kexec-kdump-howto.txt: improve notes for kdump_pre and kdump_post scripts
* Tue Nov 09 2021 Pingfan Liu - 2.0.20-61- rebase makedumpfile to 1.7.0
* Fri Oct 22 2021 Pingfan Liu - 2.0.20-60- fadump-init: clean up mount points properly- fadump: kdumpctl should check the modules used by the fadump initramfs- fadump: isolate fadump initramfs image within the default one- mkdumprd: Use xz for squash image compression
* Mon Oct 18 2021 Pingfan Liu - 2.0.20-59- makedumpfile: printk: use committed/finalized state values- makedumpfile: printk: add support for lockless ringbuffer- kexec-tools: printk: Use %zu to format size_t- kexec-tools: printk: Use ULL suffix for 64-bit constants- kexec-tools: printk: add support for lockless ringbuffer
* Sun Oct 17 2021 Pingfan Liu - 2.0.20-58- kdumpctl: fix fragile loops over find output
* Fri Aug 27 2021 Pingfan Liu - 2.0.20-57- kdumpctl: enable secure boot on ppc64le LPARs
* Fri Aug 06 2021 Pingfan Liu - 2.0.20-56- kdumpctl: fix a typo
* Mon Aug 02 2021 Pingfan Liu - 2.0.20-55- kdump/ppc64: migration action registration clean up
* Fri Jul 23 2021 Pingfan Liu - 2.0.20-54- kdump/ppc64: rebuild initramfs image after migration- Check the existence of /sys/bus/ccwgroup/devices/
*/online beforehand- kdump.sysconfig.s390: Remove \"prot_virt\" from kdump kernel cmdline
* Fri Jul 02 2021 Pingfan Liu - 2.0.20-53- check for invalid physical address of /proc/kcore when making ELF dumpfile- check for invalid physical address of /proc/kcore when finding max_paddr- fix format issue in find_online_znet_device- check the existence of /sys/bus/ccwgroup/devices before trying to find online network device- kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
* Thu Jun 17 2021 Pingfan Liu - 2.0.20-52- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable- Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet- mkdumprd: display the absolute path of dump location in the check_user_configured_target()
* Wed Jun 02 2021 Pingfan Liu - 2.0.20-51- Stop reloading kdump service on CPU hotplug event for FADump- fadump: improve fadump-howto.txt about remote dump target setup
* Tue May 25 2021 Pingfan Liu - 2.0.20-50- rd.route should use the name from kdump_setup_ifname- get kdump ifname once in kdump_install_netdev
* Tue May 25 2021 Pingfan Liu - 2.0.20-49- kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()
* Thu May 20 2021 Pingfan Liu - 2.0.20-48- kdumpctl: Add kdumpctl estimate- mkdumprd: make use of the new get_luks_crypt_dev helper- kdump-lib.sh: introduce a helper to get all crypt dev used by kdump- kdump-lib.sh: introduce a helper to get underlying crypt device- RHEL-only: keep total memory size coherent to RHEL-only kernel patch- Show write byte size in report messages- Add shorthand --show-stats option to show report stats- Add --dry-run option to prevent writing the dumpfile- kdump-lib.sh: introduce functions to return recommened mem size
* Mon May 10 2021 Pingfan Liu - 2.0.20-47- Implement IP netmask calculation to replace \"ipcalc -m\"- kdumpctl: fix check_config error when kdump.conf is empty- Fix incorrect vmcore permissions when dumped through ssh- Fix incorrect permissions on kdump dmesg file
* Mon Jan 25 2021 Pingfan Liu - 2.0.20-45- origin/rhel-8.4.0) Revert \"Revert \"Append both nofail and x-systemd.before to kdump mount target\"\"- kdump.conf: add ipv6 example for nfs and ssh dump- fix kdump failure of saving vmcore with the scp + ipv6 method
* Fri Jan 22 2021 Pingfan Liu - 2.0.20-44- module-setup.sh: don\'t polute the namespace unnecessarily- module-setup.sh: don\'t source $dracutfunctions- logger: source the logger file individually- dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode
* Fri Jan 15 2021 Pingfan Liu - 2.0.20-43- Always include watchdog-modules- mkdumprd: Ensure kdumpbase is added- Move watchdog detect and install code to module-setup.sh- Add a helper to omit non-mandatory dracut module- Move some dracut module dependencies checks to module-setup.sh- Set watchdog\'s pretimeout to zero in kdump kernel- kdump-lib.sh: Use a more generic helper to detect omitted dracut module- Fix the watchdog drivers detection code- Add a helper for detecting watchdog drivers- Remove a redundant nfs check- kdumpctl: split the driver detection from fs dection function- kdump.service: use ConditionKernelCommandLine=crashkernel- Revert \"Append both nofail and x-systemd.before to kdump mount target\"- Revert \"Don\'s try to restart dracut-initqueue if it\'s already failed\"- Fix dump_fs mount point detection and fallback mount- kdump.conf: Update doc about core_collector for ssh target- Save the final failure information to log file if saving vmcore failed- Doc: Improve the kdump sysconfig document- kdumpctl: fix a variable expansion in check_fence_kdump_config()- Fedora 33 rhpkg build bug
* Tue Dec 22 2020 Pingfan Liu - 2.0.20-42- makedumpfile: add support for ARMv8.2 LVA 52 bits
* Fri Dec 18 2020 Pingfan Liu - 2.0.20-41- Doc: improve mkdumprd man page
* Tue Dec 15 2020 Pingfan Liu - 2.0.20-40- Rework on dracut-module-setup.sh: Use systemctl call to replace ln_r
* Tue Dec 15 2020 Pingfan Liu - 2.0.20-39- dracut-module-setup.sh: Use systemctl call to replace ln_r
* Fri Dec 11 2020 Pingfan Liu - 2.0.20-38- Don\'s try to restart dracut-initqueue if it\'s already failed- fadump-howto: update about \'nocma\' and \'off\' options for \'fadump=\' parameter- dracut-module-setup.sh: use auto6 for ipv6- module-setup.sh: enable vlan on team interface- Fix rootfs detection in dump_fs- Remove RHEL-only patch: kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch- Rebase to makedumpfile-1.6.8 (step1)
* Fri Nov 13 2020 Pingfan Liu - 2.0.20-37- Doc: improve the usage documentation of the logger- Update the kdump sysconfig- Capitalize the configuration name of log level- Add the rd.kdumploglvl option to control log level in the second kernel- Appropriately converts logger numeric level to syslog log level- Remove unused log levels for kdump logger- Add sanity checks for the log levels- Add code comments to help better understanding- Doc: add a documentation for the usage of logger- Improve debugging in the kdump kernel- kdumpctl: add the \'-d\' option to enable the kexec loading debugging messages- kdump.sysconfig: add the kdump logger configurations- enable the logger for kdump- introduce the kdump logger from the dracut
* Fri Nov 06 2020 Pingfan Liu - 2.0.20-36- arm64: Enable \'kexec_file_load\' by default- Fix, Add a kernel install hook to clean up kdump initramfs
* Fri Oct 30 2020 Pingfan Liu - 2.0.20-35- module-setup.sh: Instead of drop journalctl log, just don\'t read kmsg- s390x: enable the kexec file load by default- increase makdumpfile default message level to 7- Rework check_config and warn on any duplicated option- kdumpctl: Error out if path is set more than once.- Don\'t drop journalctl content if failure action is \"shell\"- dracut-module-install: Move systemd conf install code to a function- kdump-lib.sh: Remove is_atomic- Refactor kernel image and initrd detection code- early-kdump: Use consistent symbol link for kernel and initramfs- kdump-lib: strip grub device from kdump_bootdir- kdumpctl: fix driver change detection on latest Fedora- Revert \"kdump-lib: disable efifb if hyperv_fb is in use\"- kdump-lib.sh: detect secure boot on s390- Add a kernel install hook to clean up kdump initramfs
* Wed Aug 19 2020 Pingfan Liu - 2.0.20-34- kdump-lib: disable efifb if hyperv_fb is in use
* Tue Aug 18 2020 Pingfan Liu - 2.0.20-33- sadump, kaslr: fix failure of calculating kaslr_offset due to an sadump format restriction
* Mon Aug 03 2020 Pingfan Liu - 2.0.20-32- kdumpctl: exit if either pre.d or post.d is missing
* Wed Jul 22 2020 Pingfan Liu - 2.0.20-31- ppc64/kdump: use kexec_file_load when secureboot is enabled- kdump_pre: make notes more precise- dracut-kdump.sh: exit shell when machine reboot- kdump.conf: fix a grammar issue- kdumpctl: detect modification of scripts by its directory\'s timestamp- module-setup.sh: suppress false alarm- kexec-tools.spec: make the existence of pre.d and post.d mandatory
* Tue Jul 14 2020 Pingfan Liu - 2.0.20-30- x86_64: enable the kexec file load by default- Revert \"kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default\"
* Wed Jun 24 2020 Pingfan Liu - 2.0.20-29- mkdumprd: Improve the error message for umounted dump target
* Wed Jun 24 2020 Pingfan Liu - 2.0.20-28- mkdumprd: Fix nfs detection in to_mount- Always wrap up call to dracut get_persistent_dev function- man: improve description about /etc/kdump/{pre.d,post.d}interface
* Tue Jun 16 2020 Pingfan Liu - 2.0.20-27- kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default
* Mon Jun 15 2020 Pingfan Liu - 2.0.20-26- Fix kdump failure when mount target specified by dracut_args- mkdumprd: Fix dracut error on multiple extra_modules
* Mon Jun 15 2020 Pingfan Liu - 2.0.20-25- kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface- dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d}- kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d}- dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs
* Thu Jun 04 2020 Pingfan Liu - 2.0.20-24- fadump: update fadump-howto.txt with some more troubleshooting help
* Wed Jun 03 2020 Pingfan Liu - 2.0.20-23- fadump-howto.txt: source it in spec file
* Mon Jun 01 2020 Pingfan Liu - 2.0.20-22- mkdumprd: Use DUMP_TARGET which printing error message during ssh
* Mon Jun 01 2020 Pingfan Liu - 2.0.20-21- Don\'t inherit swiotlb parameter form 1st kernel by default- Add a new option \'rd.znet_ifname\' in order to use it in udev rules- kdump.sysconfig: Remove the option \'log_buf_len\' from kdump command line- kdump-error-handler.service: Remove ExecStopPost- module-setup.sh: Add \"rd.neednet\" parameter if network is needed
* Thu May 28 2020 Pingfan Liu - 2.0.20-20- Update docs for the new noauto dump target support- kexec-kdump-howto.txt: Add some format to the document- mkdumprd: generate usable kdump initramfs even target is not mounted- Use get_mount_info to replace findmnt calls- kdump-lib.sh: add fstab failback helper for getting mount info- Allow calling mkdumprd from kdumpctl even if targat not mounted- Add a is_mounted helper- Introduce get_kdump_mntpoint_from_target and fix duplicated /- Doc: Improves the early-kdump-howto.txt document in several points- Doc: Add --force option to step 2 in early-kdump-howto.txt- Doc: Fix typo in early-kdump-howto.txt- Remove adjust_bind_mount_path call- No longer treat atomic/silverblue specially- mkdumprd: Simplify handling of user specified target- mkdumprd: Use get_save_path instead of parsing config- Remove is_dump_target_configured- Always use get_save_path to get the \'path\' option- kdump-lib: Don\'t abuse echo, and clean up- mkdumprd: Fix dracut args parsing- mkdumprd: simplify dracut args parsing
* Thu May 21 2020 Pingfan Liu - 2.0.20-19- dracut-module-setup.sh: improve get_alias()- fadump: update fadump-howto.txt with some troubleshooting help- Append both nofail and x-systemd.before to kdump mount target- Partially Revert \"Don\'t mount the dump target unless needed\"- Don\'t unmount the dump target just after saving vmcore
* Mon May 11 2020 Pingfan Liu - 2.0.20-18- makedumpfile: Avoid false-positive failure in mem_seciton validation
* Tue Apr 21 2020 Pingfan Liu - 2.0.20-17- mkdumprd: Use makedumpfile --check-params option
* Thu Apr 09 2020 Pingfan Liu - 2.0.20-16- makedumpfile update to latest
* Wed Apr 01 2020 Pingfan Liu - 2.0.20-15- makedumpfile rebase to 1.6.7
* Tue Feb 18 2020 Pingfan Liu - 2.0.20-14- kexec-tools/module-setup: Ensure eth devices get IP address for VLAN
* Wed Feb 12 2020 Pingfan Liu - 2.0.20-13- Add document to declare FCoE support
* Wed Feb 12 2020 Pingfan Liu - 2.0.20-12- powerpc: enable the scripts to capture dump on POWERNV platform
* Tue Feb 04 2020 Pingfan Liu - 2.0.20-11- s390: Use get_kaslr_offset_general() for s390x
* Fri Jan 10 2020 Pingfan Liu - 2.0.20-10- arm64: kdump: deal with a lot of resource entries in /proc/iomem- arm64: kexec: allocate memory space avoiding reserved regions- kexec: add variant helper functions for handling memory regions
* Thu Dec 12 2019 Pingfan Liu - 2.0.20-9- makedumpfile: assign bitmap1/2 fd for subprocess in non-cyclic mode
* Mon Dec 02 2019 Pingfan Liu - 2.0.20-8- makedumpfile: remove -lebl
* Thu Nov 28 2019 Pingfan Liu - 2.0.20-7- makedumpfile: Fix off-by-one issue in exclude_nodata_pages()
* Wed Nov 27 2019 Pingfan Liu - 2.0.20-6-rhel-8.2.0, origin/rhel-8.2.0) Increase SECTION_MAP_LAST_BIT to 4- spec: move binaries from /sbin to /usr/sbin- As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify- kdumpctl: make reload fail proof
* Tue Nov 12 2019 Pingfan Liu - 2.0.20-5- Don\'t execute final_action if failure_action terminates the system- module-setup: re-fix 99kdumpbase network dependency- kdumpctl: bail out immediately if host key verification failed- kdumpctl: echo msg when waiting for connection- kdumpctl: distinguish the failed reason of ssh- kdumpctl: wait a while for network ready if dump target is ssh- dracut-module-setup: filter out localhost for generic_fence_kdump- dracut-module-setup: get localhost alias by manual
* Mon Oct 28 2019 Pingfan Liu - 2.0.19-12.4- dracut-module-setup.sh: Don\'t use squash module for fadump- Don\'t mount the dump target unless needed- dracut-module-setup: fix bond ifcfg processing- Doc: amend the man page of kdump.conf
* Mon Oct 28 2019 Pingfan Liu - 2.0.19-12.3- Limit the size of vmcore-dmesg.txt to 2G- makedumpfile: x86_64: Fix incorrect exclusion by -e option with KASLR- mkdumprd: ensure ssh path exists before check size
* Fri Oct 18 2019 Pingfan Liu - 2.0.19-12.2- rebase to kexec-tools-2.0.20 and makedumpfile-1.6.6
* Fri Aug 09 2019 Pingfan Liu - 2.0.19-12- Don\'t forward and drop journalctl logs for fadump
* Mon Aug 05 2019 Pingfan Liu - 2.0.19-11- Drop switch root capability for non fadump initramfs
* Mon Aug 05 2019 Pingfan Liu - 2.0.19-10- Forward logs in kdump kernel to console directly
* Fri Jul 19 2019 Pingfan Liu - 2.0.19-9- kexec/arm64: Add support for handling zlib compressed (Image.gz) image- kexec/kexec-zlib.h: Add \'is_zlib_file()\' helper function- kexec-uImage-arm64.c: Fix return value of uImage_arm64_probe()- kexec/kexec.c: Add the missing close() for fd used for kexec_file_load()
* Sun Jul 14 2019 Pingfan Liu - 2.0.19-8- kdump.sysconfig/x86_64: Disable HEST by default
* Mon Jun 17 2019 Kairui Song - 2.0.19-7- dracut-kdump-capture.service: Use OnFailureJobMode instead of deprecated OnFailureIsolate
* Wed Jun 12 2019 Pingfan Liu - 2.0.19-6- kexec-kdump-howto.txt: Add notes about device dump- Disable device dump by default
* Mon Jun 10 2019 Pingfan Liu - 2.0.19-5- kdumpctl: check for ssh path availability when rebuild- kdumpctl: Check kdump.conf for error when rebuild is called- makedumpfile: x86_64: Add support for AMD Secure Memory Encryption- aarch64/kdump.sysconfig: Make config options similar to x86_64
* Mon May 27 2019 Pingfan Liu - 2.0.19-4- kexec-kdump-howto.txt: Add document about encrypted targets- kexec-kdump-howto.txt: Add document about initramfs rebiuld- kexec-kdump-howto: Add note on setting correct value of kptr_restrict- doc: fix dead links in the file kexec-kdump-howto.txt- earlykdump: provide a prompt message after the rebuilding of kdump initramfs.- Get rid of duplicated strip_comments when reading config- mkdumprd: Improve the config reading logic- kdumpctl: don\'t always rebuild when extra_modules is set- kdumpctl: follow symlink when checking for modified files- fadump: leverage kernel support to re-regisgter FADump
* Wed May 15 2019 Pingfan Liu - 2.0.19-3- earlykdump: Add a note of final_action option to avoid crash loop- Add final_action option to kdump.conf- Add failure_action as alias of default and make default obsolete- earlykdump: warn when installed kernel version differs from dracut target- earlykdump: add more sanity check when generating initramfs- fadump: use the original initrd to rebuild fadump initrdfrom
* Fri May 10 2019 Pingfan Liu - 2.0.19-2- kdumpctl: Detect block device driver change for initramfs rebuild- Revert \"kdumpctl: Rebuild initramfs if loaded kernel modules changed\"- mkdumprd: allow spaces after \'path\' config phrase with network dump setting- kexec.rules: create dedicated udev rules for ppc64- Revert \"rhel-only/kexec.rules: create dedicated udev rules for ppc64\"- rh-only makedumpfile/arm64: Add support for ARMv8.2-LVA (52-bit user-space VA support)
* Mon Apr 22 2019 Pingfan Liu - 2.0.19-1- kexec-tools: rebasing to 2.0.19- makedumpfile: upgrade to 1.6.5- kexec-tools: x86: Introduce a new option --reuse-video-type- makedumpfile: exclude pages that are logically offline- earlykdump: Fix failure when earlykdump is included by dracut- Update man page for new kdumpctl command: reload / rebuild- kdumpctl: add rebuild support- rhel-only/kexec.rules: create dedicated udev rules for ppc64
* Mon Apr 15 2019 Pingfan Liu - 2.0.17-30- Enable building with hardening flags
* Fri Mar 15 2019 Pingfan Liu - 2.0.17-29- add gating
* Fri Feb 22 2019 Pingfan Liu - 2.0.17-28- makedumpfile/arm64: Add support for ARMv8.2-LVA (52-bit user-space VA support)
* Fri Feb 01 2019 Pingfan Liu - 2.0.17-27- Revert \"kdumpctl, earlykdump: Don\'t use kexec_file_load when secure boot is enabled\"- mkdumprd: refine regex on dropping mount options
* Mon Jan 14 2019 Pingfan Liu - 2.0.17-26- earlykdump: fix kexec fails to load the early kdump kernel- makedumpfile/x86_64: fix an unnecessary message with --mem-usage option
* Tue Jan 08 2019 Pingfan Liu - 2.0.17-25- dracut-module-setup: Don\'t build squashed image if required modules are missing
* Mon Jan 07 2019 Pingfan Liu - 2.0.17-24- makedumpfile/arm64: Fix \'info->page_offset\' calculation for both KASLR and non-KASLR cases- makedumpfile: Prepare paddr_to_vaddr() for arch-specific p2v conversion
* Sat Dec 29 2018 Pingfan Liu - 2.0.17-23- kdumpctl, earlykdump: Don\'t use kexec_file_load when secure boot is enabled
* Mon Dec 17 2018 Lianbo Jiang - 2.0.17-22- mkdumprd: drop some nfs mount options when reading from kernel
* Fri Dec 14 2018 Pingfan Liu - 2.0.17-21- makedumpfile: Support newer kernels- kdump-lib-initramfs.sh: using -force option when poweroff- kexec-tools/vmcore-dmesg: fix infinite loop if log buffer wraps around- makedumpfile: sadump: fix failure of reading 640 KB backup region if at over 4GB location- Make udev reload rules quiet during bootup
* Thu Nov 22 2018 Pingfan Liu - 2.0.17-20- makedumpfile: Fix failure of detection of SPARSEMEM EXTREME in case of -x VMLINUX- makedumpfile: ppc64: increase MAX_PHYSMEM_BITS to 128TB- kdumpctl: Rebuild initramfs if loaded kernel modules changed
* Thu Nov 15 2018 Pingfan Liu - 2.0.17-19- Add aarch64 specific kdump.sysconfig and use \'nr_cpus\' instead of \'maxcpus\'- Add missing usage info- Throttle kdump reload request triggered by udev event- Rewrite kdump\'s udev rules- kdumpctl: Add reload support
* Tue Nov 06 2018 Pingfan Liu - 2.0.17-18- arm64: If \'getrandom\' syscall fails, don\'t error out - just warn and proceed
* Mon Oct 29 2018 Pingfan Liu - 2.0.17-17- Update help text to indicate --mem-usage is supported on archs other than x86_64- Fix \'makedumpfile --split\' error (\"Can\'t read the buffer of struct page\") on x86_64
* Tue Oct 16 2018 Pingfan Liu - 2.0.17-16- dracut-module-setup: Enable dracut squash module- dracut-module-setup: Fix DRM module inclusion test for hyper-v
* Sun Sep 30 2018 Pingfan Liu - kdumpctl: add showmem cmd- makedumpfile: fix makedumpfile Not tainted in 2nd kernel
* Thu Sep 20 2018 Kairui Song - 2.0.17-14- Add support to supply \'kaslr-seed\' to secondary kernel- kexec-tools.spec: Drop kexec-tools-2.0.3-disable-kexec-test.patch
* Mon Jul 30 2018 Florian Weimer - 2.0.17-9- Rebuild with fixed binutils
* Sat Apr 28 2018 Dave Young - 2.0.17-1- pull in makedumpfile 1.6.3
* Sat Apr 28 2018 Dave Young - 2.0.17-1- pull in 2.0.17
* Sun Apr 08 2018 Dave Young - 2.0.16-6- kdump.sysconfig.ppc64(le): remove \"root=\" param from ppc64(le) 2nd kernel- kdumpctl: Check the modification time of core_collector- dracut-module-setup.sh: pass correct ip= param for ipv6
* Fri Feb 09 2018 Igor Gnatenko - 2.0.16-5- Escape macros in %changelog
* Wed Feb 07 2018 Dave Young - 2.0.16-4- update anaconda addon migrate with Anaconda changes.
* Fri Dec 08 2017 Dave Young - 2.0.16-3- workaround koji build failure (rhbz1520805)
* Mon Dec 04 2017 Dave Young - 2.0.16-2- dracut-module-setup.sh: check whether to include multipath-hostonly or not- Revert \"kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors\"- kdumpctl: skip selinux-relabel for dracut_args --mount dump target
* Tue Nov 21 2017 Dave Young - 2.0.16-1- update to kexec-tools 2.0.16
* Thu Nov 09 2017 Dave Young - 2.0.15-15- Use absolute path /usr/bin/dracut in mkdumprd
* Wed Oct 11 2017 Dave Young - 2.0.15-14- kdumpctl: Error out in case there are white spaces before an option name
* Wed Sep 06 2017 Dave Young - 2.0.15-13- dracut-module-setup.sh: eliminate redundant kdump_get_mac_addr call- mkdumprd: use --quiet dracut argument to speedup initramfs build- mkdumprd: fix patterns to modify mount options- fadump: rebuild default initrd with dump capture capability- module-setup: remove software iscsi cmdline generated by dracut- kdumpctl: remove some cmdline inheritage from 1st kernel- mkdumprd: apply dracut \"--hostonly-cmdline\" and \"--no-hostonly-default-device\"- Change dump_to_rootfs to use \"--mount\" instead of \"root=X\"- kdumpctl: move is_fadump_capable() to kdump-lib.sh- Revert \"kdumpctl: use generated rd.lvm.lv=X\"- Revert \"mkdumprd: omit crypt when there is no crypt kdump target\"- Revert \"mkdumprd: omit dracut modules in case of no dm target\"- Revert \"mkdumprd: omit dracut modules in case of network dumping\"- update bogus date in rpm spec
* Thu Aug 17 2017 Dave Young - 2.0.15-12- makedumpfile: fix 4.13 kernel larget vmcore bug- Revert \"Improve \'cpu add\' udev rules\"
* Tue Aug 15 2017 Dave Young - 2.0.15-11- Own the /usr/share/makedumpfile dir- Mark COPYING as %license
* Tue Aug 08 2017 Dave Young - 2.0.15-10- Improve \'cpu add\' udev rules- module-setup: suppress the early iscsi error messages- mkdumprd: use 300s as the default systemd unit timeout for kdump mount
* Mon Aug 07 2017 Dave Young - 2.0.15-9- fix makedumpfile bug 1474706
* Thu Aug 03 2017 Fedora Release Engineering - 2.0.15-8- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
* Sun Jul 30 2017 Florian Weimer - 2.0.15-7- Rebuild with binutils fix for ppc64le (#1475636)
* Fri Jul 28 2017 Dave Young - 2.0.15-6- update upstream makedumpfile 1.6.2
* Wed Jul 26 2017 Fedora Release Engineering - 2.0.15-5- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
* Wed Jul 19 2017 Dave Young - 2.0.15-4- mkdumprd: remove useless \"x-initrd.mount\"- kdumpctl: use \"apicid\" other than \"initial apicid\"
* Fri Jul 14 2017 Dave Young - 2.0.15-3- module-setup: fix 99kdumpbase network dependency- mkdumprd: omit dracut modules in case of network dumping- mkdumprd: omit dracut modules in case of no dm target- mkdumprd: omit crypt when there is no crypt kdump target- kdumpctl: use generated rd.lvm.lv=X- mkdumprd: change for_each_block_target() to use get_kdump_targets()- kdump-lib.sh: introduce get_kdump_targets()- kdump-lib.sh: fix improper get_block_dump_target()- kdumpctl: fix infinite loop caused by running under bash
* Wed Jun 28 2017 Dave Young - 2.0.15-2- enable makedumpfile for arm64
* Fri Jun 23 2017 Dave Young - 2.0.15-1- rebase kexec-tools-2.0.15
* Thu Jun 15 2017 Dave Young - 2.0.14-13- kexec-tools.spec: Fix whitespace errors- dracut-module-setup: Fix test for inclusion of DRM modules- kdump.conf.5: clarify the fence_kdump_nodes option
* Thu May 18 2017 Dave Young - 2.0.14-12- kdumpctl: for fence_kdump, the ipaddr of this node should be excluded
* Fri May 12 2017 Dave Young - 2.0.14-11- kdumpctl: change the shebang header to use /bin/bash- kdumpctl: call strip_comments only when necessary to speedup- Revert \"kdumpctl: improve \"while read\" time for /etc/kdump.conf\" (rhbz1449801)
* Fri May 05 2017 Dave Young - 2.0.14-10- kdumpctl: improve \"while read\" time for /etc/kdump.conf- kdumpctl: update check_dump_fs_modified() to use \"lsinitrd -f\"- kdumpctl: improve check_wdt_modified()- kdumpctl: remove is_mode_switched()- kdumpctl: bail out earlier in case of no reserved memory
* Thu Apr 27 2017 Dave Young - 2.0.14-9- kdump: Introduce \'force_no_rebuild\' option- kdump-lib-initramfs.sh: ignore the failure of echo- kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline
* Tue Apr 11 2017 Dave Young - 2.0.14-8- kdumpctl: fix status check when CONFIG_CRASH_DUMP is not enabled in kernel- kdumpctl: fix a bug in remove_cmdline_param()- kdumpctl: remove \"root=X\" for kdump boot- Revert \"kdumpctl: filter \'root\' kernel parameter when running in live images\"
* Fri Mar 31 2017 Dave Young - 2.0.14-7- kdump-emergency: fix \"Transaction is destructive\" emergency failure- mkdumprd: reduce lvm2 memory under kdump
* Fri Mar 17 2017 Dave Young - 2.0.14-6- Fix kernel kaslr caused regressions (kexec -p and makedumpfile --mem-usage)
* Thu Mar 09 2017 Dave Young - 2.0.14-5- kdump-lib.sh: fix incorrect usage with pipe as input for grep -q in is_pcs_fence_kdump()- Document: fix incorrect link in fadump-how.txt
* Mon Jan 23 2017 Dave Young - 2.0.14-4- drop kdump script rhcrashkernel-param in kexec-tools repo- kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors- kdumpctl: change prepare_cmdline() to operate KDUMP_COMMANDLINE directly- use --hostonly-i18n for dracut
* Wed Jan 04 2017 Dave Young - 2.0.14-3- Rebase makedumpfile 1.6.1- Delete unused patches
* Tue Dec 20 2016 Dave Young - 2.0.14-2- rebase upstream kexec-tools 2.0.14- update kdump anaconda addon- cleanup sources file
* Mon Nov 28 2016 Dave Young - 2.0.14-1- kexec-tools 2.0.14-1
* Mon Nov 28 2016 Dave Young - 2.0.13-9- rename function kdump_to_udev_name- Raw dump: use by-id as persistent policy in 2nd kernel- drop dracut duplicate functions- dracut-kdump: use POSIX shell syntax- Correct two typos in kdumpctl and kdump.conf
* Fri Nov 11 2016 Dave Young - 2.0.13-8- kexec/arch/i386: Add support for KASLR memory randomization- Update kdump anaconda addon- fadump: restore default initrd when fadump mode is disabled- kdump/fadump: fix network interface name when switching from fadump to kdump- kdumpctl: filter \'root\' kernel parameter when running in live images- Documentation: step by step guide on confiuring kdump in live images
* Thu Oct 27 2016 Dave Young - 2.0.13-7- fix wrong page_offset added in 2.0.13-6
* Wed Oct 26 2016 Dave Young - 2.0.13-6- add kexec support for arm64- support x86 kaslr which is enabled by default in F25 kernel
* Fri Sep 16 2016 Dave Young - 2.0.13-5- Fix bug 1373958 for system boot without initrd- Do not depend on /etc/fstab in kdumpctl in case it does not exist
* Fri Aug 26 2016 Dave Young - 2.0.13-4- Add special dump target \"--mount\" in dracut_args
* Tue Aug 09 2016 Dave Young - 2.0.13-3- Fix armv7 build failure
* Tue Aug 09 2016 Dave Young - 2.0.13-2- Drop old patches for 2.0.12
* Tue Aug 09 2016 Dave Young - 2.0.13-1- Rebase kexec-tools 2.0.13
* Thu Jul 21 2016 Dave Young - 2.0.12-10- kdump.conf manpage and kdump.conf comments fixes.- kdump watchdog support.
* Wed Jul 13 2016 Dave Young - 2.0.12-9- Update kdump anaconda addon- makedumpfile: Support _count -> _refcount rename in struct page- module-setup: Don\'t handle iBFT in kdump
* Wed Jul 06 2016 Dave Young - 2.0.12-8- Rebase makedumpfile 1.6.0
* Mon Jun 27 2016 Dave Young - 2.0.12-7- Fix date format in spec file.
* Mon Jun 27 2016 Dave Young - 2.0.12-6- get_persistent_dev(): fix name contention with dracut\'s similar function
* Mon Jun 06 2016 Dave Young - 2.0.12-5- kdump-lib: Add get_ifcfg_filename() to get the proper ifcfg file- module-setup: Use get_ifcfg_filename() to get the proper ifcfg file
* Mon May 30 2016 Dave Young - 2.0.12-4- update kdump anaconda addon to add mem range in tui - .gitignore: Update to make it more generic- kdumpctl: check_rebuild improvement - kdumpctl: Do not rebuild initramfs when $KDUMP_BOOTDIR is read only
* Tue Mar 29 2016 Dave Young - 2.0.12-3- update kdump anaconda addon to adapt to blivet-2.0 API
* Thu Mar 24 2016 Dave Young - 2.0.12-2- Release 2.0.12-2- ppc64le: fix kexec hang due to ppc64 elf abi breakage
* Tue Mar 22 2016 Dave Young - 2.0.12-1- Rebase kexec-tools to 2.0.12
* Thu Feb 04 2016 Fedora Release Engineering - 2.0.11-4- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
* Fri Dec 11 2015 Dave Young - 2.0.11-3- use \"systemctl reboot -f\" for reboot action- Remove kernel param \"quiet\" from kdump kernel cmdline- kdump.sysconfig: add KDUMP_COMMANDLINE_REMOVE- Add missing prefixes in default sysconfig file- fix bogus date in changelog
* Thu Nov 19 2015 Dave Young - 2.0.11-2- Rebase to upstream makedumpfile 1.5.9
* Mon Nov 09 2015 Dave Young - 2.0.11-1- Rebase to upstream kexec-tools 2.0.11
* Mon Oct 19 2015 Dave Young - 2.0.10-9- kexec-kdump-howto:Add introduction of parallel dumping- Remove duplicate prefix path ${initdir}
* Tue Sep 08 2015 Dave Young - 2.0.10-8- update kdump addon to fix a kickstart installationi issue
* Wed Aug 19 2015 Dave Young - 2.0.10-7- add man page for kdumpctl
* Thu Aug 13 2015 Baoquan He - 2.0.10-6- mkdumprd: Remove ifcfg from dracut\'s modules- module-setup: Choose the first matched gateway in kdump_static_ip- module-setup: Add permanent option to detect static ip address or not
* Tue Aug 04 2015 Dave Young - 2.0.10-5- Update kdump addon to fix an installation hang issue.
* Tue Jul 28 2015 Dave Young - 2.0.10-4- ipv6 support (except for link scope addresses)- Apply the manual DNS to the 2nd kernel- load iTCO_wdt early in cmdline hook
* Thu Jul 23 2015 Dave Young - 2.0.10-3- Update kdump addon icon- Revert static route corner case patches per bhe. He discussed with Marc it is just a corner case.
* Mon Jul 13 2015 Dave Young - 2.0.10-2- update kdump addon icon
* Thu Jul 09 2015 Dave Young - 2.0.10-1- Rebase kexec-tools 2.0.10- Rebase eppic git tree 050615- Enhance kdump.conf \"default\" parameters check
* Thu Jul 02 2015 Dave Young - 2.0.9-2- Resolve bug 1236456, kexec load fail because koji add extra gcc flags.- Remove -FPIC for makedumpfile since it is not necessary without harden build
* Tue Jun 23 2015 Dave Young - 2.0.9-1- Rebase kexec-tools 2.0.9- Rebase makedumpfile 1.5.8- revert 6347630 since ipv6 patches has not been reviewed.
* Wed Jun 17 2015 Fedora Release Engineering - 2.0.8-13- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
* Thu Jun 11 2015 Dave Young -2.0.8-13- Update kdump anaconda addon icon again.
* Wed Jun 10 2015 Dave Young -2.0.8-12- Update kdump anaconda addon, change an icon.
* Wed Jun 03 2015 Baoquan He -2.0.8-11- make kdump work when kernel crash after shutdown- Disable transparent hugepages in second kernel- Filtered out \"noauto\" options in 2nd kernel fstab
* Tue Apr 21 2015 Baoquan He -2.0.8-10- add fPIC to makefumpfile CFLAGS to support hardening- dracut-module-setup: Enhance kdump to support the bind mounted feature in Atomic- Fix the warning if the target path is bind mount in Atomic- Get the mount point correctly, if the device has several mount point- kdump-lib: Add new function to judge the system is Atomic or not- kdump-lib: Add the new function to enhance bind mounted judgement- Remove duplicate slash in save path
* Thu Apr 09 2015 Baoquan He -2.0.8-9- Revert \"execute kdump_post after do_default_action\"- dracut-module-setup.sh: change the insecure use of /tmp/
*$$
* filenames- make kdump saving directory name consistent with RHEL6
* Sun Feb 15 2015 Dave Young - 2.0.8-8- execute kdump_post after do_default_action- update kdump anaconda addon (translations/help text issus)
* Fri Jan 30 2015 Baoquan He - 2.0.8-7- kdumpctl: adjust the boot dir if kernel is put in sub dir of /boot
* Tue Jan 13 2015 WANG Chao - 2.0.8-6- mount fail if its mount point doesn\'t exist in /sysroot- rebuild initrd dependency during kdump restart- fix a dump path issue
* Tue Jan 06 2015 WANG Chao - 2.0.8-5- remove panic_on_warn kernel param in 2nd kernel- remove sysctl.conf to restore sysctl default values in 2nd kernel- fix a core_collector issue in ssh and raw dump case- update to kdump-anaconda-addon-005-2-g86366ae.tar.gz- some cleanups
* Tue Nov 04 2014 WANG Chao - 2.0.8-4- Fix ppc64le installation issue- Fix get_option_value function
* Tue Oct 28 2014 WANG Chao - 2.0.8-3- fix static route corner case- fadump fix
* Tue Oct 21 2014 WANG Chao - 2.0.8-2- Fix build issue on ARM
* Mon Oct 20 2014 WANG Chao - 2.0.8-1- Rebase kexec-tools-2.0.8- Remove subpackage kexec-tools-eppic- Rebase kdump-anaconda-addon-005
* Fri Sep 26 2014 WANG Chao - 2.0.7-11- Fix build failure on ppc64le- Fix an issue on iscsi boot environment
* Tue Sep 23 2014 WANG Chao - 2.0.7-10- Enable ppc64le arch.- Rebase makedumpfile-1.5.7- add sample eppic scripts to kexec-tools-eppic package- Restart kdump service on cpu ADD/REMOVE events
* Wed Sep 10 2014 Baoquan He - 2.0.7-9- kdumpctl: Use kexec file based syscall for secureboot enabled machines- kdumpctl: Use kexec file based mode to unload kdump kernel- kdumpctl: Do not redirect error messages to /dev/null- kexec: Provide an option to use new kexec system call
* Fri Aug 29 2014 WANG Chao - 2.0.7-8- use absolute path for executable in systemd service- update to kdump-anaconda-addon-003- remove dead kdump firstboot module and po files
* Thu Aug 21 2014 WANG Chao - 2.0.7-7- install 98-kexec.rules to /usr/lib/- update kdump-anaconda-addon-0.2
* Sat Aug 16 2014 Fedora Release Engineering - 2.0.7-6- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
* Wed Aug 06 2014 WANG Chao - 2.0.7-5- rework of kdump error handling- add fadump support- add static route support- systemd will take care of shutdown and umount filesystems
* Thu Jul 24 2014 WANG Chao - 2.0.7-4- update to kdump-anaconda-addon-001-4-g03898ef.tar.gz- prefix \"kdump-\" to eth name
* Mon Jul 21 2014 WANG Chao - 2.0.7-3- update to kdump-anaconda-addon-20140721.tar.gz
* Wed Jul 16 2014 WANG Chao - 2.0.7-2- Fix makedumpfile OOM issue
* Tue Jun 10 2014 WANG Chao - 2.0.7-1- Rebase kexec-tools-2.0.7
* Sun Jun 08 2014 Fedora Release Engineering - 2.0.6-9- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
* Thu May 22 2014 WANG Chao - 2.0.6-8- re-construct anaconda-addon file hierarchy
* Wed May 21 2014 WANG Chao - 2.0.6-7- fix a typo in kexec-tools.spec
* Tue May 20 2014 WANG Chao - 2.0.6-6- New package kdump-anaconda-addon- fixes for udev event based service restart
* Wed Apr 30 2014 WANG Chao - 2.0.6-5- Remove nofail mount option- Rebase makedumpfile-1.5.6
* Thu Apr 17 2014 WANG Chao - 2.0.6-4- generate kdump service dependencies on the fly- kdump.conf: a standalone path directive becomes a relative path to it\'s backed disk.
* Wed Apr 02 2014 WANG Chao - 2.0.6-3- Add README to git repo- Add fence_kdump support for generic clusters
* Thu Mar 27 2014 Peter Robinson 2.0.6-2- Exclude AArch64
* Wed Mar 26 2014 WANG Chao - 2.0.6-1- Rebase kexec-tools-2.0.6- fix an issue when dump path is mounted on nfs- vmcore-dmesg: stack smashing fix- get_ssh_size fix for localized df output
* Mon Mar 10 2014 WANG Chao - 2.0.5-2- Warn about save vmcore patch mounted by another disk- Omit dracut resume module
* Tue Mar 04 2014 WANG Chao - 2.0.5-1- Rebase kexec-tools-2.0.5- backport several patches from upstream for i386 build
* Mon Mar 03 2014 WANG Chao - 2.0.4-25- Pass disable_cpu_apicid to kexec of capture kernel- Relax restriction of dumping on encrypted target- regression fix on wdt kernel drivers instal
* Mon Feb 17 2014 WANG Chao - 2.0.4-24- add kdump-in-cluster-environment.txt to rpm pkg- Secure Boot status check warning- Some watchdog driver support
* Wed Jan 29 2014 WANG Chao - 2.0.4-23- ssh dump: create random-seed manually- makedumpfile: memset() in cyclic bitmap initialization introduce segment fault.- Add acpi_no_memhotplug to kdump kernel- Add fence kdump support
* Tue Jan 28 2014 WANG Chao - 2.0.4-22- Rebase makedumpfile-1.5.5
* Wed Jan 22 2014 WANG Chao - 2.0.4-21- makedumpfile: Improve progress information for huge memory system- s390: use nr_cpus=1 instead of maxcpus=1
* Fri Jan 17 2014 WANG Chao - 2.0.4-20- vmcore-dmesg: fix timestamp error in vmcore-dmesg.txt- makedumpfile: re-enable mmap() and introduce --non-mmap- kdump.conf uncomment default core_collector line- fix an issue when \'ssh\' directive appearing in kdump.conf, the rest part of lines in this file are ignored
* Tue Dec 24 2013 WANG Chao - 2.0.4-18- update translation files- makedumpfile: default to lzo compression- makedumpfile: add makedumpfile.conf.sample and its manpage
* Sat Dec 21 2013 Ville Skyttä - 2.0.4-15- Fix Tamil (India) locale subdir name.- Fix bogus date in %changelog.
* Tue Dec 03 2013 WANG Chao - 2.0.4-14- Add rd.memdebug in kdump module- kdumpctl: Avoid leaking fd to subshell- makedumpfile: Understand >= v3.11-rc4 dmesg- makedumpfile, ppc: Support to filter dump for kernels that use CONFIG_SPARSEMEM_VMEMMAP.
* Fri Nov 15 2013 WANG Chao - 2.0.4-13- makedumpfile: disable mmap()
* Tue Oct 29 2013 WANG Chao - 2.0.4-12- fix sadump format phys_base calculating error- kdump, x86: Process multiple Crash kernel in /proc/iomem- makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption- Fix max_mapnr issue on system has over 44-bit addressing.
* Sat Oct 12 2013 Baoquan He -2.0.4-11- kdump-lib.sh: strip_comments is not implemented correcty
* Fri Sep 27 2013 Baoquan He - 2.0.4-10- Back port 2 revert commits- kdump.sysconfig: default to \"nofail\" mount
* Fri Sep 27 2013 Baoquan He - 2.0.4-9- Strip inline comments from the kdump config file before use- kdump-lib.sh: add common function strip_comments- Introduce kdump-lib.sh for kdump shared functions- kdump.service: Start kdump after network is online and remote fs is mounted- dracut-module-setup: _dev to be a local variable- kdumpctl: Run multiple kdumpctl instances one by one in serial order
* Wed Aug 21 2013 Baoquan He - 2.0.4-8- remove 98selinux dependency
* Fri Aug 02 2013 Baoquan He - 2.0.4-7- dracut-kdump.sh: add do_dump() and error out if dump vmcore fails- dracut-module-setup.sh: setup correct system time and time zone in 2nd kernel.- kernel cmdline: Remove hugepage allocations- Use /lib/dracut/no-emergency-shell to control action on fail- Revert: kdump.sysconfig: Add option action_on_fail and set its default as continue- dracut-kdump.sh: Redirect kdump script stdout/stderr to /dev/console- makedumpfile: Add vmap_area_list definition for ppc/ppc64.
* Fri Jul 12 2013 Baoquan He - 2.0.4-6- add snappy build- add lzo build- pull makedumpfile-1.5.4- mkdumprd: check return value of subshell- mkdumprd: get_persistent_dev() return original dev if no persistent dev exists.- dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs()- dracut-kdump.sh: explicitly sync after each dump- Correct wrong weekday of changelog- kexec-tools.spec: Remove incorrect description in changelog
* Tue Jun 25 2013 Baoquan He - 2.0.4-5- monitor-dd-progress fix- rawdump: only show dd progress bar when core_collector is not makedumpfile- kexec-tools.spec: replaces scriptlets with new systemd macros- dracut-kdump.sh: umount fs right before kdump exit- dracut-kdump.sh: recursively umount fs and its submounts- dracut-kdump.sh: cleanup - using local variable names instead of $1/$2 in functions- dracut-kdump.sh: name the invalid vmcore to vmcore-incomplete- dracut-kdump.sh: Output top level information about the kdump progress.- kexec-kdump-howto: Add a section for debugging tips
* Tue Jun 18 2013 Baoquan He - 2.0.4-4- dracut-module-setup.sh: improve the approach to get a bridged interface list- dracut-module-setup.sh: cleanup - use kdump_get_mac_addr() function- dracut-module-setup.sh: use kernel exported mac address in kdump_get_mac_addr()- dracut-module-setup.sh: use perm addr of slaves to setup bonding network- kdump: Do not output debug messages by default- dracut-module-setup.sh: kdump module depends on drm module- mkdumprd: return error if no write permission on save path of server for ssh
* Thu Jun 13 2013 Baoquan He - 2.0.4-3- mkdumprd: remove -M option for dracut- kdumpctl: add selinux relabel when service startup- depends on dracut selinux module- dracut-kdump.sh: umount rootfs after dump_to_rootfs- kdump.sysconfig: append \"panic=10\" to kdump cmdline- kexec-kdump-howto: grubby is suggested modifing kernel cmdline- kexec-tools.spec: removes kexec udev rules for s390- kdump.sysconfig: Add option action_on_fail and set its default as continue- Add tab key as delimiter for core_collector in kdump.conf- redirect stdout to stderr