Changelog for libvterm0-0.3.2-bp156.1.4.x86_64.rpm :

* Mon May 29 2023 Dirk Müller - update to 0.3.2:
* Update the cursor position when its within skipped range of rows at reflow time
* Ensure the reflow code doesn\'t attempt to invoke sb_pushline callback if not set
* Fri Jan 20 2023 Dirk Müller - update to 0.3.1:
* vterm-dump specifically emit NUL/CAN/SUB/DEL
* Optionally emit NUL/CAN/SUB/DEL from parser than
* Don\'t bother to emit the unrecognized sequence in DECRQSS
* erase_internal should only set fg/bg color, resetting others
* Added vterm_screen_set_default_colors()
* Delete mk_wcswidth functions as they\'re unused
* Also accept DECSGR sequences for superscript/subscript
* Mon Oct 03 2022 Matej Cepl - Update to 0.3.0 (unfortunately, upstream doesn\'t provide correct changelog so this is just log of VCS): - Pass lineinfos into screen resize callback; make it responsible for reshaping them - getchar() into unsigned char in vterm-ctrl.c to avoid complaints of comparison signedness (LP1894806) - Avoid remaining VLA by bounding the combining-char search to the max supported chars per cell - Avoid putting a potentially-unbounded VLA on the stack as temporary working space for character decode, by using the tmpbuffer in on_text instead - Set a much larger default out/tmpbuffer size (4096bytes), because now a size-constrained caller could make them smaller - Permit overriding size of outbuffer / tmpbuffer as builder params - Create struct VTermBuilder and vterm_build() - VTermAllocator field can be const in struct VTerm - Store INCDIR directly in .pc file rather than indirecting it via PREFIX - Version bump to v0.2 - Selection send and recv should use independent partial-state storage - Also support sending the selection - Replace vterm_push_output_sprintf_dcs with a more generic _str version that can independently control introduction C1 vs terminating ST - Add a selection callback for query - Don\'t emit any mouse sequences when mouse reporting disabled - Remember to reset mouse flags as part of overall vterm_state_reset() - Add a usage comment at the top of bin/unterm.c - Capture unit test for OSC 52 - Further bugfixes for OSC 52 handling in various split-write conditions - Bugfix for cornercase where two-byte ST is split across buffer writes - Initial attack at OSC 52 = selection management, to set the clipboard - An initial attack at documenting (most of?) the sequences from xterm - Notation fixes in doc/seqs.txt - Provide state fallbacks for APC/PM/SOS - Other C0/C1 controls are permitted within SOS strings - Recognise APC, PM and SOS in the parser - Use 0x99 as a C1 test byte instead of 0x9F because the latter is APC which is a string introducer - Set _XOPEN_SOURCE 600 unconditionally in vterm-ctrl.c - Make libvterm compile on arm64 Macs (from https://github.com/neovim/libvterm/pull/6) - Ensure that resize shorter does not send the cursor to a negative row - Remove debugging print on DECRQSS - Regenerate fullwidth.inc for latest Unicode - A much more efficient find-wide-chars.pl - Accept OSC ... ST without an intermediate semicolon after the command number - Fix printf argument types (https://github.com/vim/vim/pull/5456) - Partial bugfix for uncleared area after resize (thanks Jörg Richter) - Recognise SGR 8 for conceal (thanks Jörg Richter) - Define a new dedicated \'state fallbacks\' struct rather than abusing the parser callbacks one - New string-handling API that streams in possibly-multiple fragments - Remember to length-check accesses at cell->chars[] because it is not necessarily zero-terminated (LP 1846869) - fix memory leak of vt->tmpbuffer (LP 1843449) - t/run-test.pl option to abort on first fail - Accept convenience formatting in ?screen_chars assertions; makes unit tests more readable - Include test script line number in t/run-test.pl output - Add a short unit test that resize on altscreen at least doesn\'t crash - Only enable altscreen during unit tests that need it - Better handling of resize to try to avoid the final memmove(), and not drag scrollback in unnecessarily - Can\'t lazy-allocate state->lineinfos[BUFIDX_ALTSCREEN] because that allocs during byte run - Initial hack at tracking \'continuation\' marks per line in lineinfo - Allow run-test.pl to cope with empty assertion results - Be sure to clear DWL/DHL status for blank lines caused by scroll - Pass \'state fields\' as a struct into resize callback in case of other things it needs to edit - Remember to store a state->lineinfo array for both buffers - Do all the initialising of VTermState in vterm_state_new() - Rename realloc_buffer() to just alloc_buffer() since it doesn\'t need to realloc now - Rewrite of resize handling logic to hopefully cope much better with reflow
* Mon Mar 30 2020 Matej Cepl - All my previous builds were just figments of my imagination, and neovim upstream claims one has to use 0.1.3 only. So, downgrading.
* Mon Mar 30 2020 Matej Cepl - Update to 0.1.3+bzr767: - Remove debugging print on DECRQSS - Regenerate fullwidth.inc for latest Unicode - A much more efficient find-wide-chars.pl - Accept OSC ... ST without an intermediate semicolon after the command number - Fix printf argument types (gh#vim/vim#5456)
* Sat Jan 11 2020 Matej Cepl - Update to 0.1.3+bzr762: - Merge bugfixes up to v0.1.3 - Partial bugfix for uncleared area after resize (thanks Jörg Richter) - Recognise SGR 8 for conceal (thanks Jörg Richter) - Define a new dedicated \'state fallbacks\' struct rather than abusing the parser callbacks one - New string-handling API that streams in possibly-multiple fragments - Remember to length-check accesses at cell->chars[] because it is not necessarily zero-terminated (LP 1846869) - fix memory leak of vt->tmpbuffer (LP 1843449)
* Wed Sep 18 2019 Martin Liška - Make build verbose and respect $optflags.
* Wed Sep 11 2019 Matej Cepl - Update to 0~bzr755: - 755 t/run-test.pl option to abort on first fail - 754 Accept convenience formatting in ?screen_chars assertions; makes unit tests more readable - 753 Include test script line number in t/run-test.pl output - 752 Add a short unit test that resize on altscreen at least doesn\'t crash - 751 Only enable altscreen during unit tests that need it - 750 Better handling of resize to try to avoid the final memmove(), and not drag scrollback in unnecessarily - 749 Can\'t lazy-allocate state->lineinfos[BUFIDX_ALTSCREEN] because that allocs during byte run - 748 Initial hack at tracking \'continuation\' marks per line in lineinfo - 747 Allow run-test.pl to cope with empty assertion results - 746 Be sure to clear DWL/DHL status for blank lines caused by scroll - 745 Pass \'state fields\' as a struct into resize callback in case of other things it needs to edit - 744 Remember to store a state->lineinfo array for both buffers - 743 Do all the initialising of VTermState in vterm_state_new() - 742 Rename realloc_buffer() to just alloc_buffer() since it doesn\'t need to realloc now - 741 Rewrite of resize handling logic to hopefully cope much better with reflow - 739 Recognise an __END__ marker in a unit test file - 738 Add a version check macro - 737 Bump version to 0.1 - 736 Recognise SGR 4:3 for curly underline - 735 Recognise subparameters in SGR 4:x to set off/single/double - 734 Define some enum{} constants for pen.underline field values - 733 Run unit tests on outfunc instead of buffering logic; truncation test is no longer valid now - 732 Optional vterm_output_set_callback() to set an output func; will eventually replace buffer logic - 731 Implement Query SGR by building a tmpbuffer then making a single vterm_push_output call - 730 More efficient one-line implementation of DCS and ST rendering parts of _output_sprintf_dcs - 729 Rewrite vterm_push_output_
* functions to use a new tmpbuffer on main VT object, push all output via _output_bytes() - 728 The F1 to F4 keys should send SS3 rather than CSI when unmodified - 727 Expose cell colour index as API value (LP1805035) - 726 Document REP sequence - 725 Rename/number some more state-related tests - 724 Renumber the 4x test series up to 6x to make plenty more space for state tests - 723 Implement REP CSI (LP1805050) - 722 Add --executable/-e flag to run-test.pl (LP1805034) - 721 Ship src/
*.inc files to destdir (thanks jamessan) - 720 Add unit test for fullwidth emoji char - 719 Initial attempt at better handling of double-width unicode characters - 718 Fix implementation of query on bracketed paste mode (thanks jamessan) - 717 Need to use 1U << 31 to keep C++ compilers happy (thanks jamessan) - 716 Make sure to use CSI_
* macros rather than hardcoding (1<<31) in unterm.c (thanks jamessan) - 715 Add DECSM 1004 to documentation - 714 Move \'reportfocus\' to keep numerical ordering in vterm-ctrl.c - 713 Merge lp:~jamessan/libvterm/focus-events - 712 Move strbuffer into the .parser sub-struct - 711 Internal rearrangement of string state handling in parser, to better fit upcoming new API - 710 Now that parser \'text\' callback should always make progress, no need to use the strbuffer for it - 709 Bugfix to account for UTF-8 decoder still consuming initial bytes of a partial sequence - 708 Improved handling of ESC parsing so it doesn\'t use the temporary strbuffer - 707 Found another document about escape sequences - 706 An improved CSI parser that does not use the temporary strbuffer but instead works entirely incrementally - 705 Move parser-related state into its own sub-structure - 704 Fix -Wpedant warnings from t/harness.c - 703 Compile with -Wpedantic - 702 Minor other syntax pedant fixes to bin/
*.c files - 701 Make all bitfields \'unsigned int\' - 700 Use an ifdef instead of commented code in parser.c\'s debugging - 699 Ensure that all enums in header files lack a trailing comma, because some older C++ compilers won\'t like that - 698 Remeber to \'return 0\' at the end of main() in the binaries - 697 Avoid the \\e escape in string literals in bin/
*.c; replace with \\x1b- Removed _service file, bzr on Tumbleweed is too broken to be used automatically, rather use upstream tarballs.
* Sun May 28 2017 ronisbrAATTgmail.com- Run spec-cleaner.- Fix `libvterm.changes` indentation.
* Sat May 27 2017 bwiedemannAATTsuse.com- Version bump to 0~bzr696. Changelog:
* Add S8C1T control support to vterm-ctrl
* Implement querying of cursor shape in vterm-ctrl
* Remember to document ST in doc/seqs.txt
* Adjust linebreaking of \'break\' statements to avoid gcc warnings of misleading indentation
* Implement DECRQSS on SGR when set to RGB8 palette colours
* Reset the pen between independent tests of DECRQSS on SGR
* Bugfix for disabling mouse mode
* Ensure stdin\'s ICANON mode is restored even if vterm-ctrl exits on error
* Initialise mouse state at VTermState creation rather than as a side-effect of DECSM 100{0,2,3} - fixes LP1640917
* Pull VTermScreenCell.attrs out to its own named type
* Merge lp:~jamessan/libvterm/reproducibility (#307773, boo#1041090)
* Thu Aug 25 2016 ronisbrAATTgmail.com- Version bump to 0~bzr684. Changelog:
* Avoid \"\\e\" because some C compilers don\'t like it
* Don\'t use wchar_t in unicode.c as it might not be big enough
* Remember to pass unicode codepoints in uint32_t rather than int
* Sat Apr 09 2016 ronisbrAATTgmail.com- Version bump to 0~bzr681. Changelog:
* Bugfix(?) for SunOS (thanks DominoTree - https://github.com/neovim/libvterm/pull/1/files)
* (Alt-)Ctrl-Space should encode as (\\e)\\0
* Sat Dec 05 2015 jengelhAATTinai.de- Move description from main part to shlib part, since this will be the one that always gets installed.
* Sat Dec 05 2015 ronisbrAATTgmail.com- Remove unnecessary dependency from libvterm-tool.
* Sat Dec 05 2015 ronisbrAATTgmail.com- Remove libtool files.- Fix groups for libvterm, libvterm0, and libvterm-tools.- Change package compression from .tar.gz to .tar.xz.- Change %{soname} to %{sover}.
* Sat Dec 05 2015 ronisbrAATTgmail.com- Change package name to libvterm.
* Wed Dec 02 2015 ronisbrAATTgmail.com- Initial version based on home:gmc137:neovim/libvterm.- Version bump to 0~bzr679.- Change package version scheme to match openSUSE\'s guidelines.- Clean spec file.- Drop obsolete patch libvterm.optflags.patch.