Changelog for openblas-common-devel-0.3.26-1.1.i586.rpm :

* Thu Feb 15 2024 Egbert Eich - Remove DYNAMIC_LIST for aarch64 for older gcc versions: This has been fixed upstream.
* Wed Jan 17 2024 Egbert Eich - Update to version 0.3.26:
* General: - Improved the version of openblas.pc that is created by the CMAKE build. - Fixed a CMAKE-specific build problem on older versions of MacOS. - Worked around linking problems on old versions of MacOS. - Corrected installation location of the lapacke_mangling header in CMAKE builds. - Added type declarations for complex variables to the MSVC-specific parts of the LAPACK header. - Significantly sped up ?GESV for small problem sizes by introducing a lower bound for multithreading. - Imported additions and corrections from the Reference-LAPACK project: + Added new LAPACK functions for truncated QR with pivoting (Reference-LAPACK PRs 891&941). + Handle miscalculation of minimum work array size in corner cases (Reference-LAPACK PR 942). + Fixed use of uninitialized variables in ?GEDMD and improved inline documentation. + Fixed use of uninitialized variables (and consequential failures) in ?BBCSD. + Added tests for the recently introduced Dynamic Mode Decomposition functions. + Fixed several memory leaks in the LAPACK testsuite. + Fixed counting of testsuite results by the Python script.
* x86-64: - Fixed computation of CASUM on SkylakeX and newer targets in the special case that AVX512 is not supported by the compiler or operating environment. - Fixed potential undefined behaviour in the CASUM/ZASUM kernels for AVX512 targets. - worked around a problem in the pre-AVX kernels for GEMV
* arm64: - Sped up SGEMM and DGEMM on Neoverse V1 and N1. - Sped up ?DOT on SVE-capable targets. - Reduced the number of targets in DYNAMIC_ARCH builds by eliminating functionally equivalent ones.
* POWER: - Improved the SGEMM kernel for POWER10. - Fixed compilation with (very) old versions of gcc. - Fixed detection of old 32bit PPC targets in CMAKE-based builds. - Added autodetection of the POWERPC 7400 subtype. - Fixed CMAKE-based compilation for PPCG4 and PPC970 targets.
* LONGARCH64: - Added and improved optimized kernels for almost all BLAS functions.
* Wed Dec 20 2023 Giacomo Comes - add Requires(pre/post): coreutils to the sub-packages that use commands like: ln, dirname, mktemp, etc in the pre/post scriptlets
* Wed Nov 29 2023 Atri Bhattacharya - Update to version 0.3.25:
* General: - improved the error message shown on exceeding the maximum thread count - improved the code to add supplementary thread buffers in case of overflow - fixed a potential division by zero in ?ROTG - improved the ?MATCOPY functions to accept zero-sized rows or columns - corrected empty prototypes in function declarations - cleaned up unused declarations in the f2c-converted versions of the LAPACK sources - fixed compilation with the Cray CCE Compiler suite - improved link line rewriting to avoid mixed libgomp/libomp builds with clang&gfortran - worked around OPENMP builds with LLVM14\'s libomp hanging on FreeBSD - improved the Makefiles to require less option duplication on \"make install\" - imported the following changes from the upcoming release 3.12 of Reference-LAPACK: LAPACK PR 900, LAPACK PR 904, LAPACK PR 907, LAPACK PR 909, LAPACK PR 926, LAPACK PR 927, LAPACK PR 928 & 930
* x86-64: - fixed compile-time autodetection of AMD Ryzen3 and Ryzen4 cpus - fixed capability-based fallback selection for unknown cpus in DYNAMIC_ARCH - added AVX512 optimizations for ?ASUM on Sapphire Rapids and Cooper Lake
* ARM64: - fixed building on Apple with homebrew gcc - fixed building with XCODE 15 - fixed building on A64FX and Cortex A710/X1/X2 - increased the default buffer size for recent ARM server cpus
* POWER: - fixed building with the IBM xlf 16.1.1 compiler - fixed building with IBM XL C - added support for DYNAMIC_ARCH builds with clang - fixed union declaration in the BFLOAT16 test case - enable optimizations for the AIX assembler on POWER10
* LOONGARCH64: - added an optimized SGEMV kernel - added an optimized DTRSM kernel- Minor rebase of openblas-ppc64be_up2_p8.patch to apply cleanly.- Drop upstreamed patches:
* Use-blasint-for-INTERFACE64-compatibility.patch
* remove-spurious-loops.patch
* Fri Oct 27 2023 Stefan Brüns - Propagate the correct CPU count to the pkgconfig file, see gh#OpenMathLib/OpenBLAS#4275.
* Tue Oct 17 2023 Bernhard Wiedemann - Delete build machine cpu count
* Fri Feb 24 2023 Egbert Eich - Recreate old library scheme for existing products: It turned out the new scheme on existing systems has been causing package breakages.- Do not generate baselibs.conf for HPC builds.- Add support for gcc11 & 12.- For SLE/Leap on x86_64 and s390x do not mix compiler versions as this will make the gfortran ABI version inconsistent. Instead use the stock compiler and set the list of kernels for x86_64 cores explicitly as Cooperlake requires compiler intrinsics which are not provided by gcc 7.- Require at least 7G of disk space for building.
* Tue Feb 14 2023 Egbert Eich - Make sure pre-existing (arch-independent) update-alternatives are wiped before registering new ones. Since update-alternatives has no reliable way to check if a certain \'generic name\' exists, brute-force it and ignore any error (boo#1208248).- Remove totally pointless - ie. never executed - %%posttrans script.- Restore generic link for update-alternatives. This is usually set by the update-alternatives and it is \'%ghost\'ed but rpmlint complains.- Add rpmlintrc rules to avoid false positives from consistently guessing the update-alternatives generic name wrong.- Make arch dependent generic names conditional.
* Fri Feb 03 2023 Egbert Eich - Do not set LIBNAMESUFFIX to mark different flavors as this causes the SONAME to be different so that different flavors of OpenBLAS cannot serve as plugin replacements of each other (boo#1177260).- Fix a fallout of making alternatives directory arch dependent.- Remove unneeded links that will be created by update-alternatives. Create remaining links %post scripts properly %ghost-ing the files.
* Wed Jan 25 2023 Egbert Eich - Make library links in the alternatives directory arch dependent. This avoids conflicts when both 32-bit and 64-bit versions are installed (boo#1207563).
* Sun Dec 25 2022 Stefan Brüns - Fix aarch64 builds with GCC < 9 (i.e. Leap/SLE 15.x), disable NEOVERSEN2 target. See gh#xianyi/OpenBLAS#3874.
* Wed Nov 30 2022 Egbert Eich - Update to v0.3.21:
* general: - Updated the included LAPACK to Reference-LAPACK release 3.10.1 - when no Fortran compiler is available, OpenBLAS builds will now automatically - function LAPACKE_lsame is now annotated with the GCC attribute \"const\" to aid static analyzers - added USE_TLS to the list of options reported by the openblas_get_config() function - added SYMBOLPREFIX/SYMBOLSUFFIX handling for LAPACK 3.10.0 functions added in 0.3.20 - reverted OpenMP threadpool behaviour in the exec_blas call to its state before 0.3.11, that is the threadpool will no longer grow or shrink on demand as the overhead for this is too big at least with GNU OpenMP. The adaptive behaviour introduced in 0.3.11 can still be requested at runtime by setting the environment variable OMP_ADAPTIVE - worked around spurious STFSM/CTFSM errors reported by the LAPACK testsuite
* x86_64: - fixed determination of compiler support for AVX512 and removed the 0.3.19 - workaround for building SKYLAKEX kernels on Sandybridge hardware - fixed compilation for the SKYLAKEX target with gcc 6 - fixed compilation of the SkyLakeX small matrix GEMM kernels with LLVM or ICC - added support for the Zhaoxin/Centaur KH40000 cpu - fixed a potential crash in the ZSYMV kernel used for all targets except generic
* POWER: - worked around an overflow error in the POWER6 DNRM2 kernel - fixed compilation on PPC440 - fixed a performance regression in the level1 BLAS on POWER10 - fixed the POWER10 ZGEMM kernel - fixed singlethreaded builds for POWER10 - fixed compilation of the POWER10 DGEMV kernel with older gcc versions - enabled compilation of the BFLOAT16 kernels by default - enabled the small matrix kernels by default for DYNAMIC_ARCH builds - added a workaround for a miscompilation of the CDOT and ZDOT kernels by GCC 12- Obsolete:
* Define-sbgemm_r-to-fix-DYNAMIC_ARCH-builds.patch
* Remove-extraneous-and-wrong-definition-of-sbgemm_r-on-x86_64.patch
* Do-not-include-symbols-defined-in-driver-others-parameter.c-in-DYNAMIC_BUILD.patch
* Utilize-compiler-AVX512-capability-info-from-c_check-when-building-getarch.patch
* Revert-AVX512-capability-check-from-PR-1980-moved-to-build.patch
* Fix-checks-for-AVX512-and-atomics.patch
* Use-CC-and-full-command-line-instead-of-hard-coding-gcc-for-AVX512-checking.patch- Updated/renamed:
* openblas-noexecstack.patch to Link-library-with-z-noexecstack.patch
* openblas-s390.patch to Handle-s390-correctly.patch- Added (see https://github.com/xianyi/OpenBLAS/issues/3738):
* remove-spurious-loops.patch
* Use-blasint-for-INTERFACE64-compatibility.patch
* Wed Sep 14 2022 Egbert Eich - The toolchain and \'make\' in TW have been updated to handle parallel makes spawned by gcc (for LTO optimization) properly. Thus, remove restrictions.- Disable lto when linking test programs to speeds up building.
* Thu May 05 2022 Atri Bhattacharya - Dynamically generate baselibs.conf for openblas flavors; this will fix the unresolvables down the chain for arpack-ng 32-bit bi-arch packages.
* Fri Apr 29 2022 Egbert Eich - For non-HPC builds create links (bsc#1198885): %_lib/libopenblas_.so[.0] -> %_lib/openblas-/libopenblas.so[.0]
* Sat Apr 09 2022 Egbert Eich - Fix issues in update paths from earlier versions introduced by recent structural changes (bsc#1198264): - Add Obsoletes for old package names - Handle the change from directories to soft links properly
* Wed Apr 06 2022 Egbert Eich - Also build for s390x using latest gcc as requested by IBM (jsc#SLE-18143, bsc#1197721).
* Mon Apr 04 2022 Egbert Eich - Build HPC packages with gcc- >= 10 on Leap/SLE.
* Wed Mar 30 2022 Egbert Eich - Build PPC64LE libraries with the latest gcc available to take advantage of instruction sets in later CPUs used in the CPU specific kernels (jsc#SLE-18143, bsc#1197721). For fortran use the stock compiler to avoid compatibility issues between different versions of libfortran. This is relevant for Leap/SLE only. It may be dropped once gcc < 10 is no longer supported.- Do the same for x86_64 on SLE to make sure Cooperlake support is built properly.- Remove:
* Do-not-attempt-to-check-host-CPU-if-TARGET-is-set.patch
* Create-independent-kernel-Makfile-configuration-when-building-DYNAMIC_ARCH.patch
* For-DYNAMIC_ARCH-don-t-use-sbgemm_r-as-parameter.c-doesn-t-get-build.patch Instead, add from upstream:
* Define-sbgemm_r-to-fix-DYNAMIC_ARCH-builds.patch
* Remove-extraneous-and-wrong-definition-of-sbgemm_r-on-x86_64.patch
* Fix-checks-for-AVX512-and-atomics.patch
* Revert-AVX512-capability-check-from-PR-1980-moved-to-build.patch
* Use-CC-and-full-command-line-instead-of-hard-coding-gcc-for-AVX512-checking.patch
* Utilize-compiler-AVX512-capability-info-from-c_check-when-building-getarch.patch
* Fri Feb 25 2022 Egbert Eich - Update to v0.3.20:
* general: some code cleanup, with added casts etc. fixed obtaining the cpu count with OpenMP and OMP_PROC_BIND unset fixed pivot index calculation by ?LASWP for negative increments other than one fixed input argument check in LAPACK ? GEQRT2 improved the check for a Fortran compiler in CMAKE builds disabled building OpenBLAS\' optimized versions of LAPACK complex SPMV, SPR,SYMV,SYR with NO_LAPACK=1 fixed building of LAPACK on certain distributed filesystems with parallel gmake fixed building the shared library on MacOS with classic flang (v0.3.19) reverted unsafe TRSV/ZRSV optimizations introduced in 0.3.16 fixed a potential thread race in the thread buffer reallocation routines that were introduced in 0.3.18 fixed miscounting of thread pool size on Linux with OMP_PROC_BIND=TRUE fixed CBLAS interfaces for CSROT/ZSROT and CROTG/ZROTG made automatic library suffix for CMAKE builds with INTERFACE64 available to CBLAS-only builds (v0.3.18) when the build-time number of preconfigured threads is exceeded at runtime (by an external program calling BLAS functions from a larger number of threads), OpenBLAS will now allocate an auxiliary control structure for up to 512 additional threads instead of aborting added support for Loongson\'s LoongArch64 cpu architecture fixed building OpenBLAS with CMAKE and -DBUILD_BFLOAT16=ON added support for building OpenBLAS as a CMAKE subproject added support for building for Windows/ARM64 targets with clang improved support for building with the IBM xlf compiler imported Reference-LAPACK PR 625 (out-of-bounds access in ?LARRV) imported Reference-LAPACK PR 597 for testsuite compatibility with LLVM\'s libomp
* x86_64: fixed cross-compilation with CMAKE for CORE2 target fixed miscompilation of AVX512 code in DYNAMIC_ARCH builds added support for the \"incidental\" AVX512 hardware in Alder Lake when enabled in BIOS (v0.3.19) DYNAMIC_ARCH builds now fall back to the cpu with most similar capabilities when an unknown CPUID is encountered, instead of defaulting to Prescott added cpu detection for Intel Alder Lake added cpu detection for Intel Sapphire Rapids added an optimized SBGEMM kernel for Sapphire Rapids fixed DYNAMIC_ARCH builds on OSX with CMAKE worked around DYNAMIC_ARCH builds made on Sandybridge failing on SkylakeX fixed missing thread initialization for static builds on Windows/MSVC fixed an excessive read in ZSYMV (v0.3.18) added SkylakeX S/DGEMM kernels for small problem sizes (MNK<=1000000) added optimized SBGEMM for Intel Cooper Lake reinstated the performance patch for AVX512 SGEMV_T with a proper fix added a workaround for a gcc11 tree-vectorizer bug that caused spurious failures in the test programs for complex BLAS3 when compiling at -O3 (the default for cmake \"release\" builds) added support for runtime cpu count detection under Haiku OS worked around a long-standing miscompilation issue of the Haswell DGEMV_T kernel with gcc that could produce NaN output in some corner cases
* Power: added support for POWER10 in big-endian mode added support for building with CMAKE added optimized SGEMM and DGEMM kernels for small matrix sizes (v0.3.18) improved performance of DASUM on POWER10
* ARMV8: added SVE-enabled CGEMM and ZGEMM kernels for ARMV8SVE and A64FX added support for Neoverse N2 and V1 cpus (v0.3.19) added basic support and cputype detection for Fujitsu A64FX added a generic ARMV8SVE target added SVE-enabled SGEMM and DGEMM kernels for ARMV8SVE and A64FX added optimized CGEMM and ZGEMM kernels for Cortex A53 and A55 cpus fixed cpuid detection for Apple M1 and improved performance improved compiler flag setting in CMAKE builds (v0.3.18) fixed crashes (use of reserved register x18) on Apple M1 under OSX fixed building with gcc releases earlier than 5.1- Fix out of bounds read in ?llarv LAPACK Reference: PR 625 CVE-2021-4048, bsc#1196513- Limit parallel builds according to available memory. Do NOT use %%_smp_mflags with top level \'make\', set MAKE_NB_JOBS instead and let the build do the work. Also change -flto=auto to -flto=1: spawning even more parallel builds on top of parallel build treads will wreak havok.- Move calls to \'update-alternatives --remove\' to %%postun instead of %%preun as suggested by rpmlint.- Since we build with DYNAMIC_ARCH, create separate config files for the different target kernels to help debugging Add Create-independent-kernel-Makfile-configuration-when-building-DYNAMIC_ARCH.patch- Remove compiler feature detection when not using auto-detection. Add Do-not-attempt-to-check-host-CPU-if-TARGET-is-set.patch- Do not depend in variables which are not available when building DYNAMIC_ARCH. Add For-DYNAMIC_ARCH-don-t-use-sbgemm_r-as-parameter.c-doesn-t-get-build.patch- Do not include symbols defined in driver/others/parameter.c in DYNAMIC_BUILD to generate more conclusive error messages earlier. Add Do-not-include-symbols-defined-in-driver-others-parameter.c-in-DYNAMIC_BUILD.patch- Install lapack and blas libraries to an openblas-flavor specific subdirectory of %%_libdir and set up the alternatives to point to this directory. Set the system-wide BLAS/LAPACK default directory to %%_libdir/openblas-default. This way, the blas/lapack libraries will remain consistent and from the same source. The user is able to override this easily by setting the LD_LIBRARY_PATH to include the preferred BLAS/LAPACK implementation (boo#1177260).- Consolidate packages \'openblas-devel\' and \'openblas-devel-headers\' into \'openblas-common-devel\' (these are built for the serial flavor only). \'openblas-common-devel\' will provide the removed \'openblas-devel-headers\' while the arch specific \'preferred\' flavor will provide the removed \'openblas-devel\'.- Fix the openblas default flavor selection: [#] /usr/sbin/update-alternatives --config libopenblas.so.0- Add cmake and pkgconfig files.
* Sun Feb 13 2022 Egbert Eich - Fixed bsc#1195232 for good: found and removed offending entry. This reintroduces part of: Thu Jul 8 12:35:35 UTC 2021 - Dominique Leuenberger - Do not create dummy symlinks on $self in /etc/alternatives: those files are packages as %ghost and any real file existance only confuses brp-checks, as it detects circular symlinks.
* Sun Jan 30 2022 Egbert Eich - Partly revert: Thu Jul 8 12:35:35 UTC 2021 - Dominique Leuenberger - Do not create dummy symlinks on $self in /etc/alternatives: those files are packages as %ghost and any real file existance only confuses brp-checks, as it detects circular symlinks. for all suse_versions < current Factory in an attempt to fix bsc#1195232.
* Mon Jul 26 2021 Andreas Schwab - Use RISCV64_GENERIC for riscv64- Add -ffat-lto-objects to get proper static archives
* Thu Jul 22 2021 Ismail Dönmez - Update to version 0.3.17 - Fixes regressions introduced in 0.3.16 See https://github.com/xianyi/OpenBLAS/releases/tag/v0.3.17 for the complete changelog.
* Tue Jul 13 2021 Ismail Dönmez - Update to version 0.3.16 Please see https://github.com/xianyi/OpenBLAS/releases/tag/v0.3.15 and https://github.com/xianyi/OpenBLAS/releases/tag/v0.3.16 for the complete list of changes. A complete changelog is also available in the installed Changelog.txt .
* Thu Jul 08 2021 Dominique Leuenberger - Do not create dummy symlinks on $self in /etc/alternatives: those files are packages as %ghost and any real file existance only confuses brp-checks, as it detects circular symlinks.
* Thu Mar 18 2021 Michel Normand - Update openblas-ppc64be_up2_p8.patch trimed by previous sr (still need changes in Makefile.system)
* Thu Mar 18 2021 Ismail Dönmez - Update to version 0.3.14 common:
* Fixed a race condition on thread shutdown in non-OpenMP builds
* Fixed custom BUFFERSIZE option getting ignored in gmake builds
* Fixed CMAKE compilation of the TRMM kernels for GENERIC platforms
* Added CBLAS interfaces for CROTG, ZROTG, CSROT and ZDROT
* Improved performance of OMATCOPY_RT across all platforms
* Changed perl scripts to use env instead of a hardcoded /usr/bin/perl
* Fixed potential misreading of the GCC compiler version in the build scripts
* Fixed convergence problems in LAPACK complex GGEV/GGES (Reference-LAPACK #477)
* Reduced the stacksize requirements for running the LAPACK testsuite (Reference-LAPACK #335) RISC V:
* Fixed compilation on RISCV (missing entry in getarch) POWER:
* Fixed compilation for DYNAMIC_ARCH with clang and with older gcc versions
* Added support for compilation on FreeBSD/ppc64le
* Added optimized POWER10 kernels for SSCAL, DSCAL, CSCAL, ZSCAL
* Added optimized POWER10 kernels for SROT, DROT, CDOT, SASUM, DASUM
* Improved SSWAP, DSWAP, CSWAP, ZSWAP performance on POWER10
* Improved SCOPY and CCOPY performance on POWER10
* Improved SGEMM and DGEMM performance on POWER10
* Added support for compilation with the NVIDIA HPC compiler x86_64:
* Added an optimized bfloat16 GEMM kernel for Cooperlake
* Added CPUID autodetection for Intel Rocket Lake and Tiger Lake cpus
* Improved the performance of SASUM,DASUM,SROT,DROT on AMD Ryzen cpus
* Added support for compilation with the NAG Fortran compiler
* Fixed recognition of the AMD AOCC compiler
* Fixed compilation for DYNAMIC_ARCH with clang on Windows
* Added support for running the BLAS/CBLAS tests on Windows
* Fixed signatures of the tls callback functions for Windows x64
* Fixed various issues with fma intrinsics support handling ARM:
* Support compilation for embedded Cortex M4 targets via a new option EMBEDDED ARM64:
* Fixed the THUNDERX2T99 and NEOVERSEN1 DNRM2/ZNRM2 kernels for inputs with Inf
* Added support for the DYNAMIC_LIST option
* Added support for compilation with the NVIDIA HPC compiler
* Added support for compiling with the NAG Fortran compiler- Remove 0001-Require-gcc-11-for-builtin_cpu_is-power10.patch 0002-patch-to-support-power10-in-builtin_cpu_is-was-backp.patch Upstream fixed in a different way.
* Thu Feb 04 2021 Michel Normand - Disable lto for ppc64le to avoid build failure (bsc#1181733)- Add openblas-ppc64be_up2_p8.patch to avoid ppc64 (BE) build failure Do not set BUILD_BFLOAT16 for ppc64 (BE) (same bug nb)
* Tue Feb 02 2021 Egbert Eich - BUILD_BFLOAT16=1 is not supported in s390(x) (bsc#1181522)- Add:
* 0001-Require-gcc-11-for-builtin_cpu_is-power10.patch
* 0002-patch-to-support-power10-in-builtin_cpu_is-was-backp.patch: Only gcc11 has builtin_cpu_is(power10) - fix build issue for ppc64 (bsc#1181522).