|
|
|
|
Changelog for PrusaSlicer-debugsource-2.7.2-1.1.2.2.x86_64.rpm :
* Wed Mar 13 2024 Frank Kunz - Update to 2.7.2 [#]# Improvements with respect to 2.7.1 * Multi-material segmentation improvements * Color change (M600) improvements * Ramping travel improvements * SLA overrides * Windows specific: The cut tool sometimes produces non-manifold meshes. This situation is now detected and the user is advised to use Windows repair algorithm on the resulting objects. [#]# Bugs fixes with respect to 2.7.1 * Fixed incorrect partial arrange in certain cases. * Fixing arrange issues with aligning to unprintable objects when doing Shift+A. * Fixed arrange which sometimes put the wipe tower slightly out of bed * Fixed UI glitch when setting object dimensions to extremely high values. * Fixed a bug in generation of brim and skirt preview in the preliminary G-code preview (#11821, thanks to AATTsupermerill) * Fixed an issue Ctrl+Shift+Tab shortcut, which incorrectly collapsed sidebar. * Fixed wiggling of Rotate gizmo when moving an object in certain cases. * Fixed missing updated when moving through dropdown items using keyboard arrows. * Improve filtering of special characters on Klipper EXCLUDE_OBJECT labels (#11802, PR#11813 by AATTjschuh - thank you). * Fixed layer change color dialog opening off screen. * Fixed occasional crash during thumbnail generation for SLA printers. * Fixed slicing issues such as missing infills and similar on multi part models when sliced with object-specific settings. * In SLA mode, it was not possible to use custom file extension (configured in Output Settings). * Fixed incorrect calculation of wipe length in certain cases, leading to shorter wipes than configured. * Fixed various issues and UI glitches in text/SVG embossing. * Fixed missing update when a new printer was added while a physical printer preset was selected. * Scrolling of the window was incorrectly performed when using mouse wheel over a dropdown. * Windows specific: Drop down menus appeared outside of PrusaSlicer and could not be opened again. * When loading an object from a 3MF, the suggestion to rescale the model is not shown, because 3MFs store the information about the correct unit (unlike STL files). * Fixed an incorrect check of supported OpenGL version, which led to a hard crash when OpenGL 3.2 was not available. * When loading a 3MF for MM printer, PrusaSlicer offers to load individual models as parts of a single object. This dialog did not show up for specific geometries. * PrusaSlicer did not start on some Windows Server installations due to a missing DLL (wlanapi.dll). The library is now loaded in runtime and the respective features. * Travels with standard lifts (non-ramping) were incorrectly generated. * With option \"Retract on layer change\" disabled, there was a retraction missing before the first travel on each layer. * Variable layer height limits were not applied correctly when using multi-extruder printer with different values of min and max layer height. * When z travel speed was set to zero, it was incorrectly exported into the G-code, effectively stopping the print. Instead, regular travel speed should have been used for the z travel. * When Print / Filament / Printer profiles contained different values for the same key (which should normally not happen, providing the profiles are correct), the misplaced keys could have been used instead of the correct ones. * Fixed incorrectly applied retraction in vase mode when ramping travels were enabled. * When using the \"No sparse layers\" wipe tower, the print head sometimes lowered before travelling to the wipe tower, digging into an object and destroying the print. * Fixed a crash when loading certain AMF files. * When specific extruder was set for the wipe tower and z position has changed in custom toolchange G-code, the z position was not correctly accounted for. * Fri Dec 29 2023 Ben Greiner - Add PrusaSlicer-2.7.1-slic3r-wxWidgets-3.2.4.patch * Fixes a compilation error with wxWidgets 3.2.4 * gh#prusa3d/PrusaSlicer#11769 * Mon Dec 25 2023 Ben Greiner - Update to 2.7.1 [#]# Improvements fixed with respect to 2.7.0 * The option Export as binary G-code was removed from Print Settings. Instead, there is a new option in Printer Settings named Supports binary G-code so it can be set at printer level. There is also a new global switch in Preferences->Other, which controls whether binary G-code will be generated for printers which support it. It is therefore easy to turn the feature on or off without doing any changes in profiles (#11734, #11873). * Wipe tower weight was added into G-code metadata so it can be easily displayed in the print statistics on the printer\'s display. [#]# Bugs fixed with respect to 2.7.0 * When ramping travels were enabled, sometimes a perimeter was missing at the layer where the spiral starts. * Fixed a crash when selecting embossed text while an SVG tool is opened (#11759). * Helical layer changes could result in out of bed moves (#11754). * Helical layer change was enabled even when there was no retraction on layer change (#11709, #11761).- Release 2.7.0 * This is the stable release of PrusaSlicer 2.7.0, introducing SVG emboss, binary G-codes, ramping travels, support for G2/G3 G-codes, support for Cancel object function and much more. It also fixes many bugs. * Important note for Original Prusa MINI, MK4 and XL owners: The new configuration update of our system profiles will enable binary G-code and G2/G3 features. Users using older firmware need to update to 5.1.0-alpha2 or later or manually turn these features off. On older firmware, new binary G-code is not visible or recognized and the G2/G3 G-codes may not work perfectly. * Travel moves improvements * SVG embossing tool (#6916, #9373) * G2 and G3 G-code support #4352 * Binary G-code * Improved user interface * Custom G-code editor * Cancel object (Marlin, RRF and Klipper)- D PrusaSlicer-2.6.0-wxWidgets-CheckResizerFlags-assert-fix.patch * Fri Sep 15 2023 Ben Greiner - Update to 2.6.1 * When renaming a preset to a name containing non-ASCII characters, the encoding was mangled. This is now fixed (#11232). * Supports are no longer shown when using the clipping plane in SLA supports tool. * Fixed a crash when displaying command line help (#11060). * Two tooltips in the Cut tool dialog were shown with mangled encoding in some languages (#11236). * The Help menu in PrusaSlicer was extended with \"Sample G-codes and Models\" item, which navigates the user to the respective page on our website where these assets can be downloaded. * The Help menu was extended with \"Quick Start\" item, which navigates the user to the beginner\'s guide on our website.- Drop PrusaSlicer-pr11154-fix-cgal-c++-error.patch- Drop PrusaSlicer-drop-wx3.0.patch * Tue Aug 29 2023 Ben Greiner - Add PrusaSlicer-pr11154-fix-cgal-c++-error.patch * gh#prusa3d/PrusaSlicer#11154 * Fixes error on CGAL 5.6 * Sun Aug 20 2023 Ben Greiner - Limit to CGAL < 5.6 as it introduced breaking changes which PrusaSlicer is not compatible yet- Disable failing ix86 build * Fri Jul 21 2023 Ben Greiner - Require wxWidgets >= 3.1.6 * Add PrusaSlicer-drop-wx3.0.patch * gh#prusa3d/PrusaSlicer#11026, gh#prusa3d/PrusaSlicer#11027 * Sun Jul 09 2023 Ben Greiner - BuildRequire nanosvg-devel >= 2022.12.22 * only the fltk fork has nsvgRasterizeXY() * Wed Jul 05 2023 Hans-Peter Jansen - disable slic3r_jobs_tests.cpp, as it fails sometimes- PrusaSlicer-2.6.0-wxWidgets-CheckResizerFlags-assert-fix.patch applied * Tue Jul 04 2023 Hans-Peter Jansen - Update to version 2.6.0 * too many changes to list here, you may want to check: https://github.com/prusa3d/PrusaSlicer/commits/version_2.6.0 * PrusaSlicer-boost1.79.patch was applied upstream: removed * PrusaSlicer-cereal.patch was applied upstream: removed * gentoo-887055-boost-fix.patch was applied upstream: removed * new dependencies: nanosvg (new package), glu and glew * more sed fiddling required for system expat and qhull support * PrusaSlicer-2.6.0-octoprint-name-fix.patch added to work around compile error: cast lambda expressionn to same type * wxWidgets 3.0 is not supported anymore (even project states otherwise). Let\'s hope, it will work with 3.2 better now. upstream is using a patched 3.1 version. * Fri Apr 21 2023 Klaus Kämpf - Update to version 2.5.2 * contains profiles for Original Prusa MK4 printer- Update to version 2.5.1 * \'Monotonic lines\' top/bottom fill pattern * It is now possible to set acceleration separately for external perimeters, solid infill and top solid infill (Print Settings-> Speed->Acceleration control) * Original Prusa XL specific: Arrangement into the corner * Fixed a crash sometimes occurring when slicing very detailed models * Added Original Prusa XL profiles * Tue Jan 31 2023 Ben Greiner - Add gentoo-887055-boost-fix.patch * Fix build error with boost-filesystem 1.81 * gh#prusa3d/PrusaSlicer#9294 * https://bugs.gentoo.org/887055 * Sun Jan 01 2023 Ben Greiner - Update up-occt-version.patch * Allow any version for openCASCADE * Luckily, the package compiles with recently updated occt v7.7 * Sat Oct 29 2022 Ben Greiner - Update to version 2.5.0 * Arachne perimeter generator * Lightning infill * Pressure equalizer * STEP file import * various smaller features and bugfixes * Big changelog since v2.4.2, most changes decribed in alpha and beta release notes: https://github.com/prusa3d/PrusaSlicer/releases- Add up-occt-version.patch * Mon Sep 05 2022 Hans-Peter Jansen - Quoting Lucas Matena (see gh#prusa3d/PrusaSlicer#8299, issue 2): if you link PrusaSlicer 2.5.x with wxWidgets 3.2, you will most likely break it: link against wxWidgets 3.0.5 * Mon Aug 01 2022 Ben Greiner - Add PrusaSlicer-cereal.patch -- gh#prusa3d/PrusaSlicer#7809 * Tue May 31 2022 Ben Greiner - Disable test_voronoi -- rh#2059646 * Sun May 08 2022 Ben Greiner - Update to version 2.4.2 * SLA mode incorrectly handled 3MFs from 3rd party software, resulting in misplaced SLA support points and holes in some cases (#6100, #7359, #7189, #7826, #7659). This is very old issue. * Vase mode preview did not show in cases when Custom Start G-Code lacked moves in Z #8032 * When loading a 3rd party 3MF using drag and drop. PrusaSlicer no longer asks if the 3MF shall be loaded as a project (which makes no sense since it contains no config) and loads the geometry only * Using the Layer Height Modifier with the wipe tower was impossible with multiple objects. The wipe tower reported that the layer height profile is different, even though it was in fact set the same on all objects (#7711, #7903, #8044) * Fixed a crash on \"Convert from/to units\" when several objects were selected * Automatic color change for logo crashed PrusaSlicer in certain cases (when a one-layer object was present) #8156 * Linux specific: Fixed a crash on opening projects in some cases (#8078, #8097) * Added Snapmaker bundle (Snapmaker A250, Snapmaker A350). Based on https://github.com/nivekmai/snapmaker-prusa by AATTnivekmai, AATTWilliamBosacker, AATTmrworf * Added profiles for Zonestar printers (Z5, Z6, Z5X, Z8, Z9), based on slic3r/slic3r-profiles#19 by AATTZONESTAR3D * Fixed a crash when Unsaved Changes dialog attempted to show a modified config option which is not available in current mode (e.g. Start G-Code in Simple mode). #7905 * Fixed a bug that when the user was closing the application and replied \'Yes\' in the dialog asking about unsaved project while also checking \'Remember my choice\', it made it impossible to close PrusaSlicer in the next runs when there were no objects in the plater #8076, #8122 * Loading of a G-Code in G-Code Viewer or loading config from G-Code file sometimes failed because of a bug in parsing of the configuration block at the end. * Fixed incorrect rendering of some characters used in the recently updated Simplified Chinese translation #8171 * Fixed incorrect number of toolchanges reported in \"Sliced Info\" box when wipe tower was used. The annotations of toolchanges in G-Code were also numbered wrong #8186 * Fixed a crash when using the \"Import SL1 Archive\" function and either cancelling the dialog or confirming a non-existing file [#8175] * Recycling symbols in Shape Gallery were mirrored so the user does not have to flip them when using them as negative volumes at the base of the print (which is the usual use case). Also, PLA recycling symbol was added #7800 * Mon Apr 25 2022 Ben Greiner - Refresh PrusaSlicer-boost1.79.patch with upstream\'s fix * gh#prusa3d/PrusaSlicer#8238 * Sun Apr 24 2022 Ben Greiner - Add PrusaSlicer-boost1.79.patch avoiding the deprecation of boost::filesystem::ofstream in Boost 1.79 * gh#prusa3d/PrusaSlicer#8238 * Tue Apr 12 2022 Hans-Peter Jansen - Use gcc version 10 for anything but Tumbleweed * Tue Apr 12 2022 Adrian Schröter - Use gcc version 10 This allows the build on Leap 15.3/15.4 and in Factory using the same compiler.- Add buildignore to libglfw3-wayland to fix building for 15.3 * Fri Mar 18 2022 Ben Greiner - Update to 2.4.1 * Big changelog since v2.4.0, most changes decribed in alpha and beta release notes: https://github.com/prusa3d/PrusaSlicer/releases * introducing G-Code Substitutions * fixing bugs found in 2.4.0 release * Fri Dec 24 2021 Ben Greiner - Update to 2.4.0 * Big changelog since v2.3.3, most changes decribed in alpha and beta release notes: https://github.com/prusa3d/PrusaSlicer/releases * Send system info: new dialog for telemetry. Opt-in.- Drop patches * PrusaSlicer-catch2upd.patch * PrusaSlicer-issue6681-openvdb.patch * PrusaSlicer-pr6590-updateTBB.patch * Tue Nov 23 2021 Ben Greiner - Make compatible with TBB 2021 * add FindTBB.cmake -- gh#prusa3d/PrusaSlicer#7332 * add PrusaSlicer-pr6590-updateTBB.patch gh#prusa3d/PrusaSlicer#6590 * Fri Sep 24 2021 Ben Greiner - Add PrusaSlicer-catch2upd.patch * gh#prusa3d/PrusaSlicer#6518 * Update of Catch2 test framework from v2.13.3 to v2.13.6 * Fixes build failure due to change of MINSIGSTKSZ in glibc 2.34 * Mon Aug 30 2021 Ben Greiner - Add PrusaSlicer-issue6681-openvdb.patch * gh#prusa3d/PrusaSlicer#6681 * ilmbase-devel is now provided by openexr-devel * OpenVDB\'s FindOpenVDB.cmake requires blosc-devel * Fri Jul 16 2021 Ben Greiner - Update to v2.3.3 * fix a bug in handling FDM multi-material project and configuration files. * Fri Jul 09 2021 Ben Greiner - Update to v2.3.2 * Introducing support for the new Prusa SL1S SPEED masked SLA printer, Prusa CW1S firmware updater, PrusaLink host type for Prusa i3 MK3 printers, Monotonic infill for all solid layers, better support for reading configurations of newer PrusaSlicer releases, new 3rd party printer profiles and a handful of bug fixes.- Switch to bundled GLEW -- gh#prusa3d/PrusaSlicer#6396 * Tue Apr 20 2021 Ben Greiner - Update to v2.3.1 New 3rd party printer profiles * Multiple Creality printers profiles were added (Ender-3 Max, Ender-4, Ender-6, CR-5 Pro, CR-5 Pro H, CR-6 SE, CR-6 Max, CR-10 Max, CR-200B, CR-8), thanks AATTpmjdebruijn. * Added Artillery printer profiles (Sidewinder X1, Genius), thanks AATTSzabolcsHornyak. * Added INAT printer profiles, thanks AATTMarkINAT. * Updated Anycubic Kossel bed texture (thanks AATTbrunosso) and Anycubic Kossel bed STL. Vulnerability issues fixed * The Talos Cisco Intelligence Group did a great job identifying potential security issues in loading invalid and potentially malicious AMF and 3MF files, see their vulnerability reports TALOS-2020-1222 and TALOS-2020-1218. We fixed these two potential security issues with this release of PrusaSlicer. Bugs fixed with respect to PrusaSlicer 2.3.0 * Reduced number of hits shown by the \"Find config option\" dialog, fixed case insensitive search for non-Latin1 languages [#5202]. * Fixed G-code preview with coloring by a tool and visualization of travels enabled #6095. * Fixed opening of drop down menus at the bottom of the screen on multi-monitor setups #2999 #5911 #5957. This issue has been fixed by us in wxWidgets and accepted by the upstream. * Mon Jan 11 2021 Benjamin Greiner - Update to v2.3.0 * Introducing paint-on supports, ironing, monotonic infill, seam painting, adaptive and support cubic infill, print time per feature analysis, standalone G-code viewer application, better auto-arrange with a customizable gap and rotation, search function for the settings, reworked \"Avoid crossing perimeters\" function, physical printers (network settings), many new 3rd party printer profiles and much, much more.- Full Changelog entries for betas and release candidates: https://github.com/prusa3d/PrusaSlicer/releases- Drop PrusaSlicer-pr4340-boost-1-73.patch merged upstream
|
|
|