Changelog for python2-os-brick-2.5.10-lp150.2.1.noarch.rpm :

* Thu Jul 09 2020 Keith Berger - Apply patches to resolve CVE-2020-10755 (bsc#1172522) - 0001-Remove-VxFlex-OS-credentials-from-connection_propert.patch - 0002-Fix-Remove-VxFlex-OS-credentials-regression.patch
* Tue Apr 07 2020 cloud-develAATTsuse.de- update to version 2.5.10 - Check path alive before get scsi wwn - Skip cryptsetup password quality checking - iscsi: Add _get_device_link retry when waiting for /dev/disk/by-id/ to populate - linuxscsi: Stop waiting for multipath devices during extend_volume - Handle None value \'inititator_target_map\' - Fix FC scan too broad - Ignore pep8 W503/W504
* Mon Oct 21 2019 cloud-develAATTsuse.de- update to version 2.5.8 - FC: Ignore some HBAs from map for single WWNN - OpenDev Migration Patch - Improve iSCSI device detection speed
* Tue May 14 2019 cloud-develAATTsuse.de- update to version 2.5.7 - Fix FC case sensitive scanning
* Thu Apr 11 2019 cloud-develAATTsuse.de- update to version 2.5.6 - \'iscsiadm -m session\' failure handling
* Wed Feb 06 2019 cloud-develAATTsuse.de- update to version 2.5.5 - Tests: Fix PrivRootwrapTestCase failure - The validation of iscsi session should be case insensitive - Fix NFS \"already mounted\" detection - Tests: Add unit tests for nfs mount race - Retry executing command \"nvme list\" when fail
* Thu Oct 11 2018 cloud-develAATTsuse.de- update to version 2.5.4 - Succeed on iSCSI detach when path just went down - Update UPPER_CONSTRAINTS_FILE for stable/rocky - Fix multipath disconnect with path failure - Update .gitreview for stable/rocky - Improve detection of multipathd running - import zuul job settings from project-config - Ignore volume disconnect if it is not connected
* Wed Oct 10 2018 Dirk Mueller - switch to stestr
* Tue Sep 04 2018 cloud-develAATTsuse.de- update to version 2.5.3 - adding sheepdog connector for PPC64 - FC Allow for multipath volumes with different LUNs - Update reno for stable/queens - Windows SMBFS: avoid mounting local shares by default - Enable hacking-extensions H204, H205 - Windows: fix connectors \'disconnect_volume\' signature - Remove testrepository - Add release note link in README - add a getter for connector mapping - Adding support to extend attached ScaleIO volumes - Fix bindep for multipath - Windows iSCSI: ensure disks are claimed by MPIO - RemoteFS: don\'t fail in do_mount if already mounted - Trivial: Update pypi url to new url - Accept ISCSI_ERR_NO_OBJS_FOUND from iscsiadm - fix tox python3 overrides - FC fix for scanning only connected HBA\'s - Incorporate the connection_properties input for PPC64 - s390x fc: Fix device path for Ubuntu with ds8k - Windows FC: fix disk scan issues - Include \"nqn.\" in subsystem name - Handle multiple errors in multipath -l parsing - Switch to using stestr - uncap eventlet - Fix FC: Only scan connected HBAs - Updated from global requirements - add lower-constraints job - Windows SMBFS: allow mounting vhd/x images
* Fri Mar 02 2018 cloud-develAATTsuse.de- update to version 2.3.0 - Add client connect exception unit test for rbd - Update supported transports for iscsi connector - Remove legacy connector constants - Enable some off-by-default checks - Fix iSCSI volume attachment over RDMA transport - doc: Switch from oslosphinx to openstackdocstheme - Cleanup test-requirements - Avoid tox_install.sh for constraints support - Enable Python hash randomization for tests - Recover node.startup values after discovering - set vg_thin_pool_size to float type - FC connector logs number of attempts incorrectly - Add the StorPool brick connector - Fix vmware migrate available volume bug - doc: Restructure docs for doc-migration - Update and replace http with https for doc links - adding VERITAS_HYPERSCALE connector for PPC64 - Update and optimize documentation links - Add .stestr.conf configuration - FC PPC64 device discovery issue - Remove requirement on oslo.serialization - Adding NVMEoF for initiator CLI - Get the right portal from output of iscsiadm command - Add attribute \'name\' to class RBDVolume. - Fix ISCSIConnector._get_potential_volume_paths logic - Make close on luks volumes idempotent - doc: Remove cruft from conf.py - Remove the unnecessary pv_list assign during LVM object init - rescan fails for hba missing target wwn - adding iSER connector for PPC64 - Fixing FC scanning - Make close on cryptsetup volumes idempotent - Updated from global requirements - adding VZSTORAGE connector for PPC64 - Update reno for stable/pike - Fix _remove_scsi_symlinks_no_links test - Remove setting of version/release from releasenotes - Always set ignoreskipactivation on snapshot creation - Fix a typographical error in a release notes entry. - Protect against race within os.path.realpath
* Thu Feb 01 2018 cloud-develAATTsuse.de- update to version 1.15.5 - Make close on luks volumes idempotent - Protect against race within os.path.realpath - Avoid tox_install.sh for constraints support - Make close on cryptsetup volumes idempotent
* Tue Jan 30 2018 cloud-develAATTsuse.de- update to version 1.15.3 - FC PPC64 device discovery issue - Update UPPER_CONSTRAINTS_FILE for stable/pike - Fix iSCSI volume attachment over RDMA transport - Get the right portal from output of iscsiadm command - rescan fails for hba missing target wwn - Updated from global requirements
* Fri Aug 25 2017 cloud-develAATTsuse.de- update to version 1.15.2 - iSCSI multipath: improve logging on connect - Don\'t use ignoreskipactivation for thin LVM - Don\'t obscure logs on iSCSI sendtargets failure - RBD: consider a custom keyring in connection info - Stop ignoring E265 pycodestyle rule in tox - Include identity information in rbd commands - Change code to be more Pythonic - Refactor iSCSI disconnect - Return correct device path from Veritas connector - os-brick connector for Veritas HyperScale - Veritas os-brick connector should use privsep - encryptors: Delay removal of legacy provider names - Move vzstorage related code out of RemoteFsClient - Changed way of providing RBD keyring from keyring_path to client token - Add open-iscsi manual scan support - Fixed the veritas connector path - Change log level on _get_hba_channel_scsi_target - Check host device alive before multipath id discovery - Add Python 3.5 classifier and venv - Fix ceph incremental backup fail - Update .gitreview for stable/pike - Removed invalid comments in tox.ini [flake8] - Fix iSCSI multipath rescan - Fix manual scan for discovery type backends - Using assertIsNone(x) instead of assertEqual(None, x) - Force LUN_ID to an int - Fix iSCSI cleanup fix on discovery backends - Stop ignoring H405 hacking rule in tox - Add libssl to bindep - Replace random uuid with fake uuid in unit tests - Stop ignoring H904 hacking rule in tox - Fix ISCSIConnector._get_potential_volume_paths logic - Adding support for FibreChannelConnector for PPC64 - Update hacking version to align with Cinder - Fixed generated temp file problem for RBD backend - Add Ocata release notes page - Mask logging of connection info for iSCSI connector - Prevent rbd map again if it\'s already mapped - Fix multipath flush when using friendly names - Stop ignoring E123 and E125 pycodestyle rules - Return WWN in multipath_id - Fix unittest run on s390x host - Fix iSCSI cleanup issue when using discovery - Retry multipath flush when map is in use - Remove log translations - Refactor iSCSI connect - Fix supported connectors for Power platform - Fix slow test_connect_volume_device_not_valid test - Return symlinks for encrypted volumes - Updated from global requirements - Revert \"Don\'t use ignoreskipactivation for thin LVM\"- Drop 0001-Fix-unittest-run-on-s390x-host.patch . Applied upstream.
* Tue Aug 08 2017 dmuellerAATTsuse.com- add 0001-Fix-unittest-run-on-s390x-host.patch- remove 0001-Inherit-connector-mapping-for-Linux-s390-from-Linux-.patch, 0001-s390x-iscsi-support-enablement.patch: partially upstreamed
* Mon Feb 20 2017 cloud-develAATTsuse.de- update to version 1.11.0: - Code cleanup in initiator/linuxfc.py - Move castellan to test-reqs - Change assertTrue(isinstance()) with optimal assert - Windows remotefs: create mountpoints at the expected location - os-brick: Add bindep support - DISCO: Log init message as debug - standardize release note page ordering - Windows connectors: add device_scan_interval arg - Enable release notes translation - Docstrings should not start with a space - Detect if Fibre Channel support exists - Mask passwords in utils.trace for func params - Create connector aliases to the new connectors refactor - Update reno for stable/newton - RBD: ensure temporary config gets deleted - Fix cmd execution stderr, stdout unicode errors - Show team and repo badges on README - Mock time.sleep for test_lv_deactivate_timeout test - encryptors: Mock os_brick.executor correctly - Close connection to ceph after cinder bakcup - Use assertEqual() instead of assertDictEqual() - Add developer docs url in README.rst(trivial) - Add retries to iSCSI connect_volume - Replace \'assertTrue(a not in b)\' with \'assertNotIn(a, b)\' - Add curl to bindep - Delete MANIFEST.in in os-brick - Removes unnecessary utf-8 encoding - Replace assertDictMatch with assertDictEqual - Fix import method to follow community guideline - s390 FC device path fix for Ubuntu - Add Constraints support and missing bindep.txt dependencies - linuxrbd: remove obsolete comment on close() - Stop calling multipath -r when attaching/detaching iSCSI volumes - TrivialFix: Remove logging import unused - Change warning to info logging for connected volume rescans - RBD: enclose ipv6 addresses in square brackets - s390x iscsi support enablement - encryptors: Introduce encryption provider constants - Drop py33 support - Raise specific exception for an invalid protocol connector - linuxfc: log path when HBA not found - Retire ISERConnector from documentation - Remove the duplicate calls to rescan - Multipath device keeps old size when extending volume - Remove self.__dict__ for formatting strings - Add debug to tox environment - encryptors: Workaround mangled passphrases - Encryptors: Fix compat with Nova encryptors for Ocata - Updated from global requirements - Fix a wrong indentation - Delete deprecated Hacking in tox.ini
* Mon Jan 02 2017 dmuellerAATTsuse.com- add 0001-Inherit-connector-mapping-for-Linux-s390-from-Linux-.patch
* Sun Dec 18 2016 dmuellerAATTsuse.com- add 0001-s390x-iscsi-support-enablement.patch
* Sun Nov 20 2016 dmuellerAATTsuse.com- add 0001-Fix-unittest-run-on-s390x-host.patch
* Thu Sep 29 2016 tbechtoldAATTsuse.com- Use global-requirements for stable/newton in _service
* Tue Sep 06 2016 tbechtoldAATTsuse.com- update to version 1.6.1
* Create connector aliases to the new connectors refactor
* Fri Sep 02 2016 tbechtoldAATTsuse.com- update to version 1.6.0
* RBD: Fix typo in rados timeout assignment
* Fix the mocking mess
* Disconnect multipath iscsi may logout session
* Remove race condition from lvextend
* Trivial rootwrap -> privsep replacement
* Fix iSCSI discovery with ISER transport
* Add support for processutils.execute
* Fix FC multipath cleanup
* Add fast8 to quickly test pep8 changes
* Mask out passwords when tracing
* Copy encryptors from Nova to os-brick
* Add tracing unit tests
* Add trace facility
* Handle exception case with only target_portals
* LVM: Create thin pool with 100%FREE
* Local attach feature in RBD connector
* Fix multipath iSCSI encrypted volume attach failure
* RemoteFsClient extend Executor
* Add Windows Fibre Channel connector
* Fix argument order for assertEqual to (expected, observed)
* Ensure that the base connector is platform independent
* Mock time.sleep in ISCSIConnectorTestCase
* Remove unused LOG to keep code clean
* Add missing %s in print message
* Update the home-page info with the developer documentation
* Wrong param makes exception message throws inaccurate
* Upgrade tox to 2.0
* Fix linuxrbd to work with Python 3
* Make RBDImageMetadata and RBDVolumeIOWrapper re-usable
* os-brick refactor get_connector_properties
* ScaleIO to get volume name from connection properties
* Add Windows iSCSI connector
* Fixes with customized ceph cluster name
* Fix iSCSI multipath cleanup
* Add connector for GPFS volumes
* release note for windows iSCSI
* Add Windows SMBFS connector
* Fix coverage generation
* Replace assertEqual(None,
*) with assertIsNone in tests
* Mock write and read operations to filesystem
* Fix the typo in the file
* Remove useless info logging in check_valid_device
* Add connector for vmdk volumes
* Fix string interpolation to delayed to be handled by the logging code
* Fix wrong path used in iscsi \"multipath -l\"
* Fix FC multipath rescan
* Make code line length less than 79 characters
* Replace ip with portal to express more accurately
* Updated from global requirements
* Fix weak test_vzstorage_with_mds_list
* Splitting Out Connectors from connector.py
* Add ignore for . directories
* Mon Jul 04 2016 tbechtoldAATTsuse.com- Switch to upstream .spec file- Use renderspec source service to render upstream .spec.j2 template
* Fri Apr 15 2016 dmuellerAATTsuse.com- update to 1.3.0:
* LVM: Call supports_thin_provisioning as static
* Add pylint tox env
* Don\'t use oslo-incubator stuff
* Update reno for stable/mitaka
* Replace _get_multipath_device_name with _discover_mpath_device
* Fixes get_all_available_volumes return value
* Updated from global requirements
* Update .gitreview for stable/mitaka
* Fix Scality SOFS support
* Actually run the RemoteFSClient unit tests
* Mock time.sleep() in 3 unit tests
* Tue Mar 29 2016 tbechtoldAATTsuse.com- update to 1.2.0:
* Updated from global requirements
* Update .gitreview for stable/mitaka
* Mon Mar 14 2016 dmuellerAATTsuse.com- update of 1.1.0:
* Fix setting the multipath_id
* Updated from global requirements
* Include multipath -ll output in failed to parse warning
* Fix iSCSI Multipath
* Add missing release notes
* Lun id\'s > 255 should be converted to hex
* Updated from global requirements
* Fix output returned from get_all_available_volumes
* Raise exception in find_multipath_device
* Updated from global requirements
* Remove multipath -l logic from ISCSI connector
* Add vzstorage protocol for remotefs connections
* Add reno for release notes management
* Fix get_device_size with newlines
* Updated from global requirements
* Add connector for ITRI DISCO cinder driver
* os-brick add extend_volume API
* os-brick add cinder local_dev lvm code
* Revert \"Use assertTrue/False instead of assertEqual(T/F)\"
* Fix another unit test failure
* Use assertTrue/False instead of assertEqual(T/F)
* Actually log the command used in _run_iscsiadm
* Updated from global requirements
* remove python 2.6 trove classifier
* DRBD connector class
* Updated from global requirements
* Deprecated tox -downloadcache option removed
* ScaleIO could connect wrong volume to VM
* Allow RBDClient to be used from a with-statement
* Updated from global requirements
* Remove brackets from portal
* Minor documentation fixes for the method parameters
* Add requests to project requirements
* Add quobyte protocol for remotefs connections
* Correct a log message
* Brick add param documentation to connectors
* Updated from global requirements
* Multipath Device Action Being Parsed as Name
* Fix iopsLimit parameter in ScaleIO connector
* Parse FCoE sysfs device paths
* Add new Connector APIs for path validation
* Updated from global requirements
* Fix test_connect_volume when skip is bypassed
* Fetch and return SCSI WWN
* Update minimum tox version to 1.8
* Updated from global requirements
* Wait for FC multipath devices to become writable
* Check RBDConnector.disconnect_volume device_info argument
* Updated from global requirements
* Fix silent iSCSI login failures
* Change os-brick to use ostestr
* Updated from global requirements
* Removed use of deprecated LOG.warn
* Fix typo in vgc-cluster command in rootwrap file
* Sun Oct 04 2015 tbechtoldAATTsuse.com- update to 0.5.0:
* Change ignore-errors to ignore_errors
* Updated from global requirements
* Add fancy pypi version and download images
* iSCSI fix misleading Log warning on connect fail
* Fix missing value types for log message
* Log a message when can’t find multipath device
* Removed unused dependency: discover
* Use \'device\' instead of \'volume_path\'
* Sun Sep 06 2015 tbechtoldAATTsuse.com- update to 0.4.0:
* Add support for --interface option in iscsiadm
* FC Stop calling multipath command line
* Updated from global requirements
* Add rootwrap filters
* Handle FC LUN IDs greater 255 correctly on s390x architectures
* Fix incorrect comments in FibreChannelConnector
* Adding CHAP discovery logic to os-brick
* Updated from global requirements
* Remove the iSCSI rescan during disconnect
* Remotefs: add ScalityFS support
* Updated from global requirements
* Updated from global requirements
* Change SCSI device removal backoff rate
* Changed connector protocols to use constants
* Updated from global requirements
* Fix race in check and access of /dev/disk/by-path/
* Updated from global requirements- Adjust Requires according to requirements.txt- Install %{_sysconfdir}/os-brick/rootwrap.d/os-brick.filters
* Thu Jul 30 2015 tbechtoldAATTsuse.com- update to 0.3.2:
* FC discover existing devices for removal
* Use pbr\'s automatically generated changelog
* Updated from global requirements
* Updated from global requirements
* Update changelog to 0.3.0 being latest
* Fix mock==1.1.0 break unit tests
* Cleanup Python 3 changes
* Prep for 0.2.1 release
* Add connector driver for the ScaleIO cinder driver
* Added ABCMeta class to the InitiatorConnector
* Remove unused oslo incubator files
* update os-brick to pass python3 tests
* Updated from global requirements
* FC Eliminate the need to return devices list
* Switch to oslo.service
* Add RBD connector
* Add HGST Solutions connector
* Support host type specific block volume attachment
* Updated from global requirements
* optimize multipath call to identify IQN
* Updated from global requirements
* Trivial exception parameter name fix for Huawei
* Fix connecting unnecessary iSCSI sessions issue
* Fix disconnecting necessary iSCSI sessions issue
* Add retry to iSCSI delete
* Updated from global requirements
* Add missing connectors to factory test
* Fix local connector test case inheritance- Adjust Requires according to requirements.txt
* Tue Jun 02 2015 tbechtoldAATTsuse.com- update to 0.2.0:
* Allow overriding the host field
* Assign the platform after declaration
* Added a unit test for masking iscsiadm passwords
* Preparing for the 0.1.1 release
* ISCSI be careful parsing iscsiadm output
* Updated from global requirements
* Drop use of \'oslo\' namespace package- Fix _service- Adjust Requires according to requirements.txt
* Sat May 16 2015 dmuellerAATTsuse.com- Initial package