Changelog for librmt1_0-2022.10.16-8.2.i586.rpm :

* Thu Nov 17 2022 Jan Engelhardt - Update to release 2022.10.16
* bsh: Implement ^L support
* libmdigest: Add support for BLAKE2 digests
* mkisofs: No longer warn about Joliet being nonstandard. With the 2019 revision of ECMA 119, Joliet has been added as an annex to the standard.
* Wed Aug 31 2022 Thorsten Kukuk - pbosh.1: replace broken \".so sh.1\" refernce with a symlink to bosh.1
* Sat Aug 27 2022 Thorsten Kukuk - Fix update-alternatives for rmt.1
* Wed Sep 01 2021 Jan Engelhardt - Update to release 2021.09.01
* smake: The man page now better describes pattern macro replacement.- Drop schily-stksz.diff (resolved upstream)
* Sun Aug 15 2021 Jan Engelhardt - Update to release 2021.08.14
* A new test was added to check whether SIGSTKSZ is a constant.
* smake: While expanding the right side of a macro assignment with the operators :::= and +:=, smake no longer expands $$ to $, but rather leaves $$ untouched.
* smake: The dynamic macros $? and $^ now work for implicit rules as well.- Add schily-stksz.diff
* Sat Jul 31 2021 Jan Engelhardt - Update to release 2021.07.29
* Bourne Shell: \"cd -\" now prints the new directory, required by POSIX.
* star: A single Linux xattr entry with a zero length value did disable all Linux xattrs for the related file. This is now handled correctly.
* ved: ved maxll=79 now checks whether the cursor is > column 79 before entering a new line character.
* ved: ved now aborts the startup if it turns out to be connected to a hardcopy terminal.
* Tue Jun 08 2021 Jan Engelhardt - Update to release 2021.06.07
* Manpage updates
* Thu May 20 2021 Jan Engelhardt - Update to release 2021.05.19
* Bourne Shell: The \"ERR\" trap is now also triggered in case that the error is of type \"command not found\" or \"cannot execute\".
* Bourne Shell: the fc(1) builtin now handles \"fc -l -0\" the same way as ksh does and refers to the current command. Before, only \"fc -l -1\" did work to select the previous command.
* Tue May 04 2021 Jan Engelhardt - Update to release 2021.04.21
* Bourne Shell: The new version no longer aborts with an illegal multi byte sequence as \"no match\". As a result, the \"
*\" now again matches any filename - even if the filename contains an illegal multi-byte sequence.
* SunPro Make: The new operators :::= and +:= have been introduced.
* Thu Nov 26 2020 Jan Engelhardt - Update to release 2020.11.25
* libhfs_iso: changed malloc() to calloc() to avoid uninitialized data.
* ved: A new colon command (ESC : vhelp) has been added.- Remove fix_junk_in_partition.patch (upstreamed)
* Fri Nov 20 2020 Adam Majer - fix_junk_in_partition.patch: Initialize memory that created the partition table instead of writing random bytes to it (bsc#1178692)
* Sat Nov 07 2020 Jan Engelhardt - Move ctags to update-alternatives scheme.
* Thu Nov 05 2020 Jan Engelhardt - Update to release 2020.11.04
* Bourne Shell: If a background job did finish during an implicit wait for a foreground job, the exit code for the background job was lost, which was fixed.
* star: ACLs and Linux xattrs did not work if the path name to a file was longer than PATH_MAX, which was fixed.
* Fri Oct 09 2020 Jan Engelhardt - Update to release 2020.10.09
* Bourne Shell: The \"wait\" builtin is now POSIX compliant and returns 127 in $? in case that a process id to be waited for does not exist.
* Bourne Shell: The exit code retrieved by $/ no longer is masked by 0xFF when this code originates from a wait(1) call.
* Bourne Shell: The exit code from background jobs is now kept until the builtin wait(1) is called.
* Wed Sep 23 2020 Jan Engelhardt - Update to release 2020.09.22
* SCCS: delta now supports to handle nul bytes in the diff(1) output.
* SCCS: delta now supports nul bytes in the new version of the input file if processing SCCSv6 history files.
* SCCS: delta now by default uses `fsdiff` instead of `bdiff`.
* SCCS: delta, if called as `delta -d ...`, now calls diff(1) with the option -a.
* Sat Sep 05 2020 Jan Engelhardt - Update to release 2020.09.04
* sccs: get(1) and delta(1) now restore the removed newline at the end of the last line if this was a SCCSv6 \"^ANxxx\" line to support files not ending in a newline.
* sccs: The delta(1) command now correctly handles deltas where the last difference hits the end of the history file.
* sccs: The delta(1) command now removes the e.file in case of an error abort.
* Thu Aug 13 2020 Jan Engelhardt - Update to release 2020.08.12
* star: GNU cpio archives may contain longer path names than permitted by the AT&T documentation, problems with which where fixed.
* sccs: sccslog again allows ovelapping delgets and now allows overlapping delget groups to be correctly detected as commit bundle.
* Sun Jul 19 2020 Jan Engelhardt - Update to release 2020.07.18
* star: star could dump core if it was used as `star -t ...` or `star -x ...` while being in a UTF-8 based locale and trying to deal with extremely long pathnames (more than PATH_MAX) in the archive.
* fifo: the fifo command is based on the star FIFO code and has been changed to support a FIFO size > 2 GB as well.
* Fri Jul 03 2020 Jan Engelhardt - Update to release 2020.07.01
* star: Backslashes are now honored when looking for the substitution separators in options like -s /from/to/ or - pax-s /from/to/
* cdda2wav: The default for the CDDB database has been changed to gnudb.gnudb.org, as freedb.freedb.org has shutdown.
* Full support for SCCSv6 history files.
* SCCS: A new sccs(1) subcommand \"histfile\" has been implemented.
* SCCS: admin fixed a potential buffer overflow related to the user (programmer) name that is used in the delta table.
* Fri Jul 03 2020 Jan Engelhardt - Run tests after build.
* Tue Jun 09 2020 Jan Engelhardt - Update to release 2020.06.09
* star: A new option -one-file has been added that causes star to exit after a single file has been extracted as a result from a pattern match or command line argument match.
* star: A new option iskip=# has been introduced. The argument is the number of bytes to skip before looking for the first archive header in the first tape block read after star started.
* star: A new option mtskip=# has been introduced. This option causes star to issue a \"mt fsr xxx\" equivalent on a tape archive.
* Tue May 26 2020 Jan Engelhardt - Update to release 2020.05.25
* mkisofs: Fixed an integer overflow bug in mac_label.c with Apple -chrp boot.
* star: The subst command for pax now supports the \\1, \\2, ... escapes for \\(...\\) selections in the from pattern, like it is used by sed(1).
* star: A new subst option -pax-s has been added that supports sed(1) like substitutions. The old option -s continues to support change(1) like substititions.
* SCCS: A new option -X0 has been introduced to allow to use nul byte separated file names on stdin when using the file argument \"-\".
* SCCS: The commands sccslog and sccscvt now also support the argument \"-\" as a directive to read filenames from stdin.
* SCCS: `sccs init` now by default creates an empty changeset history file with release 1.0 as $SRC_ROOT/.sccs/SCCS/s.changeset This signals SCCS to work in project mode where a group of files is managed together and the version 1.0 allows the first proect release to become 1.1.
* SCCS: `sccs init -s` now allows to initialize a directory tree without creating a $SRC_ROOT/.sccs/SCCS/s.changeset history file. This signals SCCS to work in single file mode.- Drop large_mac_iso.patch (merged)
* Wed May 13 2020 Jan Engelhardt - Update to release 2020.05.11
* SCCS: the \"sccs root\" command now checks for too many arguments and only allows zero or one path arguments.
* mkisofs: README.eltorito has been enhanced to mention \"-boot-load-size\" and \"-eltorito-platform efi\".
* isoinfo: Identifying an EFI boot record has been added to mkisofs. Isoinfo is now able to print \"efi\" instead of the unexpected \"Unknown arch\".
* Mon May 11 2020 Adam Majer - mkisofs: fix integer overflow in partition table calculation when chrp-boot is enabled and a large ISO image is created. (large_mac_iso.patch, bsc#1169420)
* Wed Apr 29 2020 Jan Engelhardt - Update to release 2020.04.18
* smake: A new option -a has been added. This option allows to tell smake not to set up the automake specific make macros MAKE_ARCH, MAKE_OS and similar.
* Sat Mar 28 2020 Jan Engelhardt - Update to release 2020.03.27
* mkisofs: A new option -noatime has been introduced in order to use the modification time of the files instead of the last access time.
* mkisofs: New options -creation-date, -effective-date, - expiration-date have been introduced in order to use the supplied time stamp instead of the current time in the PVD.
* mkisofs: A new option -reproducible-date has been added. This option sets -creation-date, -modification-date, - effective-date and -noatime at the same time and helps to make usage easier.
* Bourne Shell: The case statement now supports the alternate end case symbol \";;&\" that has been introduced by bash. If \";;&\" is used instead of \";;\", the next pattern list is evaluated and if there is a match, the related command list is executed.
* Mon Mar 16 2020 Jan Engelhardt - Update to release 2020.03.11
* Bourne Shell: set -m now works in scripts as well. Before, bosh did never call startjobs() when the shell startup was done with a shell script.
* Bourne Shell: The shell now supports the alternate ;& switch command limiter in addition to ;; where ;& implements a fallthrough to the next command list regardless on thether there is a match or not.
* Wed Feb 12 2020 Jan Engelhardt - Update to release 2020.02.11
* Bourne Shell: A new variable ${.sh.path} returns the absolute path of the binary associated to the exec() for this shell.
* Bourne Shell: `for i in; do cmd ...; done` is now valid syntax even though this is useless.
* SCCS: comb.c now puts the filename in the created shell script in single quotes.
* SCCS: comb.c now forbids single quotes and backslashes in filenames as they would cause problems with the shell script created by comb.
* Tue Feb 04 2020 Jan Engelhardt - Set -fcommon [boo#1160291].
* Sun Jan 12 2020 Jan Engelhardt - Update to release 2019.12.05
* libschily: the function getargs() and similar (from the option parser group) now support an extended format specifier: Previously, %0 and %1 have been supported, now all single digit numbers %0..%9 are supported.
* libfind: The functions fetchdir()/dfetchdir(), sortdir(), cmpdir() now use size_t instead of int for the entry number count and the allocated size.
* star: The new-volume-script= script is now called at the end of _every tape_, even at the last one. This now allows to have a script that automatically renames a standard archive name into numbered archive names when a tree should be splitted into chunks.
* star: In \"pax\" command line mode, star now uses -no-fsync as default.